NEW PRODUCT RELEASE Universal Cable Test Kit for Wi-Fi and Broadband Applications

Total Page：16

File Type：pdf, Size：1020Kb

Division of RF Industries NEW PRODUCT RELEASE Universal Cable Test Kit for Wi-Fi and Broadband Applications Wireless, Wi-Fi and Broadband infrastructure installation requires cables for RF and data throughput. Testing these cable assemblies in the field can be difficult with the variety of unique connectors available today as well as the popular reverse polarity styles. The RFA-4028-WIFI kit by RF Connectors, a division of RF Industries, simplifies the task. The kit contains a Unidapt RF Cable tester (RFA-4018-20) with an assortment of 30 universal adapters, including male and female MMCX, N, Reverse Polarity TNC, Reverse Polarity SMA, TNC, BNC and SMA connector interfaces. By joining two adapters using a universal center included in the kit, coaxial adapters can be made with any combination of these interfaces. The RFA-4018-20 coaxial cable tester is a solid-state continuity checker that measures for opens and shorts. The LED display indicates continuity for the shield and center conductor, as well as check for shorting across conductor paths. An additional continuity tester is included for testing CAT5/5E/6 straight through or crossover RJ-45, UTP, 10Base-T, 100Base-T, 1000Base-T EIA/TIA 568A/568/B network cables. The LED display on the tester identifies the cable pairs and indicates a correctly wired cable. It will also indentify crossed pairs or miss-wired pairs. The kit is housed in a foam-lined impact resistant plastic case. Available from RF Connectors distributors throughout the US, Canada and Mexico. For additional information call 800-233-1728 or 858-549-6340. You can also e-mail: [email protected] or visit our web site at www.rfindustries.com RF Industries (NASDAQ RFIL) is a leading supplier of communications and medical cable products through its company divisions. 7610 Miramar Road, San Diego, CA 92126-4202 • (858) 549-6340 • (800) 233-1728 Fax: (858) 549-6345 • Email: [email protected] • Website: www.rfindustries.com .

Copy Link

Recommended publications

RF Connector Overview Guide Linx Technologies Offers a Wide Variety of SMA, MCX, MMCX and MHF Radio Frequency Connector and Cable Assemblies
RF Connector Overview Guide Linx Technologies offers a wide variety of SMA, MCX, MMCX and MHF radio frequency connector and cable assemblies. RF connectors and cables consist of miniature precision-machined mechanical components and clever designs with complex assembly which are necessary to minimize losses and reflections. This requires tight tolerances, quality surface finishing and proper choice of metals and insulators. By combining domestic design and quality with offshore connector manufacturing, Linx offers low loss connectors at very competitive prices for OEM customers. – 1 – Revised 9/24/15 SMA Connectors Cable Termination SMA and RP-SMA Connecctors SMA (subminiature version A) connectors are high performance coaxial RF connectors with 50-ohm matching and Connector Body Orientation Mount Style Cable Types Polarity Part Numbers excellent electrical performance up to 18GHz with insertion loss as low as 0.17dB. They also have high mechanical Type Finish RG-174, RG-188A, Standard CONSMA007 strength through their thread coupling. This coupling minimizes reflections and attenuation by ensuring uniform SMA007 Straight Crimp End Plug Nickel RG-316 contact. SMA connectors are among the most popular connector type for OEMs as they offer high durability, low Reverse CONREVSMA007 RG-58/58A/58C, Standard CONSMA007-R58 VSWR and a variety of antenna mating choices. In order to comply with FCC Part 15 requirements for non-standard SMA007-R58 Straight Crimp End Plug Nickel RG-141A Reverse CONREVSMA007-R58 antenna connectors, SMA connectors are
[Show full text]
Test Leads and Probes
Test Leads and Probes TEST LEADS AND PROBES 키슬리 공식 채널파트너 Accessories Test Leads and Probes ..................... 348 Cables ................................... 352 Connectors, Adapters, and Tools ............ 364 Adapter, Cable, Prober, and Stabilizer Kits ... 375 Test Fixtures.............................. 377 Trigger Accessories ....................... 378 Bench Kit and Rack Mount Kits............. 380 Cabinets ................................. 383 Side Text Remote PreAmp Mounting Accessories ...... 383 Carrying Case............................. 384 Computer Accessories, Power Splitter ........ 384 IEEE-488 (GPIB) Interface Solutions ........ 385 IEEE-488 (GPIB) Accessories .............. 386 ACCESSORIES 070-7872-0703 키슬리 공식 채널파트너 347 Test Leads and Probes Test leads AND proBes selector Guide Model Name Use With: 1600A High Voltage Probe DMMs 1651 50-Ampere Shunt DMMs 1681 Clip-On Test Lead Set DMMs 1751 Safety Test Leads All DMMs, Series 2400 1752 Premium Safety Test Lead Kit All DMMs, Series 2400 Item shipped may vary from model 1754 Safety Universal Test Lead Kit All DMMs, Series 2400 pictured here. 2187-4 Low Thermal Test Lead Kit 2182A, 622x Current Sources 2600-BAN Banana Test Leads/Adapter Cable 2601A, 2602A, 2611A, 2612A 3706-BAN Banana Test Leads/Adapter Cable Series 3700, Series 3700A Mainframes 3706-TLK Test Lead Kit Series 3700, Series 3700A Mainframes Model 1681 Clip-On Test Lead Set: Two 1.2m 5804 General-Purpose, 4-Terminal Test Lead Set Series 2400, 2750, DMMs (48 in) leads terminated with banana plugs and 5805 Kelvin Probes, 0.9m (3 ft) Series 2400, 2750, DMMs spring action clip-on probes. 5805-12 Kelvin Probes, 3.6m (12 ft) Series 2400, 2750, DMMs 5806 Kelvin Clip Lead Set, 0.9m (3 ft) Series 2400, 2750, DMMs For use with: DMMs 5807-7 Helical Spring Point Test Leads, 2.1m (7 ft) Series 2400, 2750, DMMs Item shipped may Side Text 5808 Single-pin Kelvin Probe Series 2000, 2700, 2701, 2750, Series 2400 vary from model 5809 Kelvin Clip Lead Set Series 2000, 2700, 2701, 2750, Series 2400 pictured here.
[Show full text]
Coaxial Cabling Tutorial
166 Coaxial Cabling Tutorial How is Coaxial Cabling used? Where is Coaxial Cabling used? Primarily, coaxial cables are used for the A broad range of applications exist for What is Coaxial Cabling? transmission of Radio Frequency energy. coaxial cabling. The two primary The system offers tight control over impedance values of 50 and 75 Ohms A coaxial cable is a two conductor electrical impedance. This yields excellent determine specific applications with 50 electrical cable consisting of a center performance at high frequencies and Ohms primarily used in data signal conductor and an outer conductor with an superior EMI control / shielding. applications and 75 Ohms used in video insulating spacer between the two. signal applications. Coaxial Cabling Terms Frequency: Number of times a periodic action Currently used as a general reference. (R=Radio occurs in one second. Measured in Hertz. Frequency, G=Guide, U=Universal Specification). Attenuation (Insertion Loss): Loss of power. Letters that appear before the / U characters (i.e. A, B Attenuation is usually measured in dB loss per length Impedance: The opposition to the flow of alternating or varying current. Measured in Ohms. Two common or C) means a specification modification or revision. of cable (ex. 31.0 dB / 100ft.). Attenuation increases For instance, it is common in the CB industry to see as frequency increases. impedance values are 50 Ohms used primarily for data and 75 Ohms used to transmit video signals. the designation RG-58A / U. The original RG-58 / U Bend Radius: The amount of radius a cable can coaxial cable had a solid center conductor.
[Show full text]
Coaxial Connectors Adapters and Connectors
Coaxial Connectors Adapters and Connectors Overview Many coaxial connector types are available in the RF and microwave industry, each designed for a specific purpose and application. For measurement applications, it is important to consider the number of connects/disconnects, which impact the connector’s useful life. The frequency range of any connector is limited by the excitation of the first circular waveguide propagation mode in the coaxial structure. Decreasing the diameter of the outer conductor increases the highest usable frequency; filling the air space with dielectric lowers the highest usable frequency and increases system loss. Performance of all connectors is affected by the quality of the interface for the mated pair. If the diameters of the inner and outer conductors vary from the nominal design, if plating quality is poor, or if contact separation at the junction is excessive, then the reflection coefficient and resistive loss at the interface will be degraded. A few connectors, such as the APC-7, are designed to be sexless. Most are female connectors that have slotted fingers. The fingers need to accommodate a male pin with diameter variations. As a result, it introduces contact point and impedance variations and hence reduced repeatability and reliability. Keysight Technologies, Inc. offers slotless versions of connectors in certain measuring products, that decrease impedance and contact point variations. Find us at www.keysight.com Page 1 The following is a brief review of common connectors used in test and measurement applications: APC-7 (7 mm) connector The APC-7 (Amphenol Precision Connector-7 mm) offers the lowest reflection coefficient and most repeatable measurement of all 18 GHz connectors.
[Show full text]
RF Connectors 50 Ohm Catalog
Electronic Components Customer Support Locations ASIA Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Baoan District, Shenzhen City, Guangdong, China 518125 Tel: +86 755 2726 7238 Cannon 50 Ohm Fax: +86 755 2726 7515 RF Connectors GERMANY Cannonstrasse 1 Weinstadt, 71364 Tel: +49.7151.699.0 Fax: +49.7151.699.217 ITALY Corso Europa 41/43 Lainate (MI), Italy 20020 Tel: +39.02938721 Fax: +39.0293872300 UK Jays Close, Viables Estate Basingstoke, Hants, RG22 4BA Tel: +44.1256.311200 Fax: +44.1256.323356 USA 100 New Wood Road Watertown, CT 06796 Tel: 860.945.0206 Toll Free: 800.683.7666 Fax: 860.645.0303 www.ittcannon.com ©2007 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. 50 RF Apr-07 Over 90 year history ... ITT's Electronic Components business (www.ittcannon.com) is an international supplier of connectors, interconnects, cable assemblies, I/O card kits and smart ITT Electronic Components is an innovative and dynamic company with card systems. As a worldwide leader in connector technology for nearly a the in-depth experience of a 90 plus year industry leader. We are part of century, ITT offers one of the industry's broadest product offerings, ITT Corporation, a multi-disciplined, multi-national company engaged in manufacturing capability worldwide, fast time to market, high volume/high the design and manufacture of electronic components, defense products yield capacity, robust design and Value-Based Product Development and an and fluid handling controls.
[Show full text]
MICROWAVE COAXIAL CONNECTOR TECHNOLOGY: a CONTINUING EVOLUTION Mario A
MAURY MICROWAVE 13 Dec 2005 CORPORATION Originally published as a Feature Article in the Microwave Journal 1990 State of the Art Reference, September 1990; Updated December 2005 MICROWAVE COAXIAL CONNECTOR TECHNOLOGY: A CONTINUING EVOLUTION Mario A. Maury, Jr. Maury Microwave Corporation (a) Introduction Coaxial connectors are one of the fundamental tools of microwave technology and yet they appear to be taken for granted in many instances. Unfortunately, many engineers tend to overlook the lowly connec- tor with resulting performance compromises in their applications. A good understanding of connectors, both electrically and mechanically, is required to utilize them properly and derive their full benefit. It should be remembered that performance starts at the (b) connector. Figure 1: Precision coaxial connectors in use today; Coaxial connectors provide a means to connect and (a) 7mm and 14mm sexless connectors and (b) 3.5mm female disconnect transmission lines, components and sys- and male, type N female and male. tems at microwave frequencies. They allow accessing circuits, modularizing, testing, assembling, inter- This paper provides a brief history of coaxial connec- connecting and packaging components into systems. tors, gives an overview of coaxial connector technology today, cites sources of further informa- There is a broad variety of coaxial connectors avail- tion and takes a look into the future as connectors able today due to the various design trade-offs and continue to evolve. applications that exist at microwave frequencies, including impedance (usually 50 ohms), frequency IEEE P287 Committee of operation, power handling, insertion loss, reflec- tion performance, environmental requirements, size, In 1988, the sub-committee P287 for precision co- weight and cost.
[Show full text]
Maury Microwave Between-Series Datasheet 2 (Pdf)
Full-service, independent repair center -~ ARTISAN® with experienced engineers and technicians on staff. TECHNOLOGY GROUP ~I We buy your excess, underutilized, and idle equipment along with credit for buybacks and trade-ins. Custom engineering Your definitive source so your equipment works exactly as you specify. for quality pre-owned • Critical and expedited services • Leasing / Rentals/ Demos equipment. • In stock/ Ready-to-ship • !TAR-certified secure asset solutions Expert team I Trust guarantee I 100% satisfaction Artisan Technology Group (217) 352-9330 | [email protected] | artisantg.com All trademarks, brand names, and brands appearing herein are the property o f their respective owners. Find the Maury Microwave 8816D at our website: Click HERE Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com Also Available from Maury Microwave — Measurement & Modeling Device Characterization Solutions Featuring The Most Complete Selection of Load Pull Solutions in the Test & Measurement Industry Helping Your Designs Succeed The First Time • RF Device Characterization Methods • Pitfalls To Avoid When Purchasing A Device Characterization System • Device Characterization Software – IVCAD Advanced Measurement & Modeling Software (MT930 Series) – ATSv5 Automated Tuner System Software (MT993 Series) – AMTSv3 Automated Mobile Test System Software – 50 GHz Noise Receiver Modules (MT910 Series) – 50 GHz PNA-X Noise Receiver Modules • Maury Automated Tuners – Millimeter-Wave Noise Receiver Modules
[Show full text]
Guide to RF Coaxial Connectors and Cables
Guide to RF Coaxial Connectors and Cables Given that typical RF systems are comprised of any number of items, e.g. RF generators, amplifiers, attenuators, power meters, couplers, antennas, etc., it is not uncommon that a great deal of thought is given to these “high end” devices while mundane items such as connectors and cables are often treated as an afterthought. With a wide variety of coaxial connectors and cables available for use in the RF and Microwave spectrum not giving these essential components too much thought is a misstep and can result in undesirable system degradation. RF coaxial connectors provide vital RF links in communications, broadcast, EMC testing, commercial and military, as well as test and measurement fields. In this guide, you will learn about the different types of RF Coaxial Connectors and Cables and the various uses for each. Guidance and insight will be provided to assist in choosing connectors best suited to accommodate your specific applications. 1.0 RF Coaxial Connectors The vast array of RF connectors available can be overwhelming, but they are all characterized by just a few key parameters. The most obvious characteristic of a connector is its physical size. Other considerations include power handling and frequency range capabilities. To ensure maximum Find It Fast power transfer, the characteristic impedance of the connector should match the source and load. All of these characteristics, along with connector durability and cost, must be considered for each application. Page 2 of 9: The most commonly found connector types in RF applications are available in both male and female 3.5 mm configurations, standard and precision grades, high frequency and in some cases high power versions.
[Show full text]
RF Connector Guide RF Connector Guide
RF Connector guide RF Connector guide HUBER+SUHNER is certified according to ISO 9001, ISO 14001, ISO/TS 16949 and IRIS. WAIVER HUBER+SUHNER AG It is exclusively in written agreements that we provide our custom- Radio Frequency Division ers with warrants and representations as to the technical specifica- tions and/or the fitness for any particular purpose. The facts and 9100 Herisau/Switzerland figures contained herein are carefully compiled to the best of Tel. +41 (71) 353 41 11 our knowledge, but they are intended for general informational Fax +41 (71) 353 44 44 /11.2008 648116 purposes only. hubersuhner.com HUBER+SUHNER® RF CONNECTOR GUIDE Understanding connector technology Published by HUBER+SUHNER (www.hubersuhner.com) HUBER+SUHNER RF CONNECTOR GUIDE 4th edition, 2007 HUBER+SUHNER® is a registered trademark of HUBER+SUHNER AG Copyright© HUBER+SUHNER AG, 1996 Published in Switzerland by HUBER+SUHNER AG, Switzerland All rights reserved. In particular no part of this publication may be reproduced, stored, or translated, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permis- sion of HUBER+SUHNER AG. Request of reproduction must be addressed to HUBER+SUHNER AG, CEO. Document no. 648116 Printed in Switzerland PREFACE After having been in the RF Interconnection Market for more than fifty years, we felt the need to provide our business associates around the world with a booklet containing key information on coaxial connectors. Today, key concepts behind RF technology have not changed much - and this is what this booklet, the HUBER+SUHNER RF CONNECTOR GUIDE, is all about.
[Show full text]
Rf Connectors for Upper Frequencies
RF CONNECTORS FOR UPPER FREQUENCIES This page developed by Tom Williams, Amateur Radio Service Primary Station License Call Sign WA1MBA. It is meant for reference use. Do not copy or publish without permission and citation. If asked, permission is usually granted for educational, internal commercial, and reference use. Background This page describes small RF connectors, focusing on those which perform at microwave frequencies (well above 1 GHz). Included are SMA, K, BNC, N, APC-7 mm, SMB, SMC, W, V, 3.5 mm, 2.9 mm, 1.85 mm and 1.0 mm. Much of this information was taken from Hewlett Packard/Agilent application notes and catalogs, Wiltron/Anritsu datasheets, M/A-Com catalogs, and other sources. If you have more and/or better information about small RF connectors, please let me know (see bottom of page). Why different connectors? Many coaxial connector types are available in the RF and microwave industry, each designed for a specific purpose and application. Much of the development of the smaller connectors that perform well into the GHz and millimeter wave range has been conducted by test equipment measurement companies. One of their considerations is the number of connect-disconnect cycles that a connector pair can withstand while still performing as expected. Below, the connectors are arranged into three categories: Primary Interconnects - widely used to interconnect RF equipment and components, Less Common Interconnects - connectors that are used to interconnect RF equipment and components, but are less widely in use, and Connectors for Precision Measurement Systems - which, as the title implies, are usually found only interconnecting and mating to measurement apparatus such as spectrum and network analyzers.
[Show full text]
Connecting the World
Optimize Your RF/MW Coaxial Connections Dave McReynolds Director of Engineering RF Industries /microwave connectors are small and often overlooked, but they serve as gateways for many RF electronic devices and systems, linking components and systems together to enable proper operation. Coaxial connectors are often taken for granted—until they fail. They are instrumental to the operation of many electronic devices and systems, from cellular telephones and wireless data networks to the most advanced radar and electronic-warfare (EW) systems. Whether designing or simply maintaining electronic devices and systems, understanding the role of the RF/microwave connector can help to boost both performance and reliability. Before exploring technical details about connectors, it might help to review some of their history. Connectors come in many shapes and sizes. They are used in a variety of electronic devices, from audio through millimeter-wave frequencies. The interface dimensions, machine tolerances, materials, even the plating and finish on those materials, all contribute to how well and how reliably a connector performs. Coaxial connectors are designed for mounting on the end of coaxial cables, on printed-circuit boards (PCBs), on panels, and on many different electronic component and device packages. Why there are so many different types of coaxial connectors and adapters is largely a matter of RF/microwave history and the evolution of high-frequency technology. With the evolving demands of higher-frequency applications, connector developers are pushed to achieve ever higher frequencies, smaller footprints, unique interfaces, and better performance with their designs. Anyone who has assembled a cable-television (CATV) system, with its F-type connector/cable assemblies, will appreciate the convenience of an electrical connector without necessarily being aware of its electrical and mechanical benefits.
[Show full text]
Interconnect Capabilities
INTERCONNECT CAPABILITIES WHEN PERFORMANCE MATTERS Carlisle Interconnect Technologies (CarlisleIT) is one of the world’s leading designers and manufacturers of high- performance interconnect solutions. For over 70 years CarlisleIT has been providing leading-edge designs in wire and cable, connectors and assemblies for commercial and military aircraft, avionics, in-flight entertainment and communications systems. This catalog was designed to provide a focused presentation of our product lines in regards to your market and products. While it is not a complete list of CarlisleIT’s capabilities, it should provide a thorough starting point to aid you in your design considerations. Thank you for considering CarlisleIT for your interconnect requirements and needs. We Are Interconnect. www.CarlisleIT.com 3 4 Table of Contents RF/Microwave Connectors Push-On .......................................................................................................... 6 High Performance Threaded ............................................................................. 10 Connectors RF/Microwave Test Adapters ................................................................................................ 12 Swept Right Angle .......................................................................................... 14 Phase Adjusters .............................................................................................. 16 EMI Protection & Transient Voltage Suppression Circular .........................................................................................................
[Show full text]