Cardinal Glass-NIE World of Wonder 5-21-20 Bridges.Indd

Total Page:16

File Type:pdf, Size:1020Kb

Cardinal Glass-NIE World of Wonder 5-21-20 Bridges.Indd Opening The Windows Of Curiosity Sponsored by Types of bridges Spec Ad-NIE World Of Wonder 2019 SupportingTotal Ed length: Top 6,016 ft. (1, 834 m) There are seven basic types Exploring the realms of history, science, nature and technology Height: 272 ft. (83 m) of bridges: girder, truss, arch, Width: 85 ft. (26 m) cantilever, suspension, cable- Span: 1596 ft. (486 m) stayed and movable. Girder bridges are made of beams that rest on abutments or piers. BRIDGESThe first bridges were probably made of vines or logs that spanned small streams or rivers. Today, bridges are modern marvels that merge form, function, engineering, architecture and design. Truss bridges use a network Looking back of support frames. This type of The first bridges were formed bridge is often built over can- by natural events such as a Originally known as the yons and rivers. tree falling over a river. Humans New York and Brooklyn Bridge or the East River Bridge, it was officially quickly learned to fell trees and renamed the Brooklyn Bridge in 1915. place them over short spans. Simple constructions of cut wooden logs or planks laid over a simple support of stones were The Brooklyn Bridge (1883) spans the East River in New York. It was designed by The arch bridge is one of the then developed. John A. Roebling of Trenton, New Jersey, and was the largest suspension bridge in oldest types and was popular in ancient Rome. A revolution in bridge construc- the world until 1931, when the George Washington Bridge was built. tion came with the ancient Ro- mans, who introduced the arch and used cement (made from volcanic rock and lime) to build bridges and aqueducts. The Inca civilization of the 16th Cantilever bridges have two century built rope suspension beams that reach from either bridges. Alcántara Bridge, A.D. 104-106, Spain Chapel Bridge side of an embankment, joined Many European bridges built be- Spanning the Tagus River, the Alcán- 1333, Lucerne, Switzerland in the middle by a girder or tween the 12th and 16th centuries truss. also had houses built on them. tara Bridge is a masterpiece of ancient This covered bridge burned in 1993 and Rome. Total length: 596 ft. (181.6 m) was rebuilt. Total length: 670 ft. (204 m) The first iron bridge opened in 1779. It crosses the River Severn in Shropshire, England. Parts of a bridge Suspension bridges hang the Abutment roadway from steel cables sup- The main support at either end ported by towers. These bridges of a bridge, and the sides that can span great distances, some support an arch, are called Pont Neuf, 1578-1606, Paris, France Rialto Bridge, 1591, Venice, Italy more than 4,000 feet (210 m). abutments. Pont Neuf translates as New Bridge. This pontoon bridge crosses the Grand Arch It spans the River Seine and is the Canal and replaced older wooden An arch is a curved structure oldest bridge in Paris. bridges at this location. that spans an open space. Total length: 761 ft. (232 m) Longest span : 104.3 ft. (31.80 m) Bent A bent is a crosswise structural Cable-stayed bridges are simi- element used to construct a lar to the suspension bridge. trestle, a key support element They both hang the roadway in many bridges. from cables and towers, but the Coffer dam cable-stayed bridge attaches A coffer dam is a boxlike tem- the cables directly to the towers. porary dam used to create foundations under water. John A. Roebling Suspension Tower Bridge, 1894, London, England Deck Bridge, 1866, Cincinnati, Ohio This combination bascule and sus- The deck is the bridge's surface. Originally called the Cincinnati- pension drawbridge crosses the River Foundation Covington Bridge, it spans the Ohio Thames and is a popular tourist attrac- Movable bridges allow the The foundation connects the River. Main Span: 1,057 ft. (322 m) tion. Total length : 801 ft. (244 m) roadway to be moved entirely or structure to the ground. partially in order to allow boats Girder and ships to pass through. A girder is the main horizontal There are three kinds of move- support beam on a bridge. able bridge: bascule, vertical lift and swing. The bascule bridge Piers tilts upward to open. The verti- The piers support the bridge cal bridge raises the roadway from underneath. between two towers. The swing Piles Sydney Harbor Bridge, 1932, Australia Howrah Bridge, 1943, Calcutta, India bridge moves on an axle and Piles are shafts extending deep This bridge took eight years to build and This is one of the busiest cantilever pivots sideways. into the ground around the piers is the world’s largest (but not longest) bridges in the world. It spans the Hooghly to increase stability. steel arch bridge. Total length: 3,770 ft. River. Longest span: 1,500 ft. (457.2 m) Span (1,149 m) A span is a section of bridge SOURCES: World Book Encyclopedia, World Book Inc.; The World Almanac for Kids; http://www.bridgesdb.com; http://www.historyofbridges.com; between two piers. https://www.americanbridge.net; https://www.popularmechanics.com Chat with the author and like us on Facebook — www.facebook.com/worldofwonder2014 © 2020 Triefeldt Studios, Inc. Distributed by Andrews McMeel Syndication LEARN ABOUT RACCOONS IN THE NEXT INSTALLMENT OF WORLD OF WONDER SUPPORTING EDUCATION TODAY FOR INNOVATION TOMORROW Pinal County’s Daily Newspaper Newspapers The most advanced residential glass products in the industry. in Education View us online at www.cardinalcorp.com Cardinal Glass-NIE World Of SpecWonder Ad-NIE 5-21-20 World Bridges Of Wonder 2019 Supporting Ed Bottom DISP 5/21 (1) Zoe 6 x 21.5 FULL COLOR • Whole ad is art bam/ol.
Recommended publications
  • Drawbridge Committee Notes from December 2, 2005 1 of 1
    Lagoon Pond Drawbridge Committee Notes from Decemer 2, 2005 Present: Melinda Loberg and Mark London (Lagoon Pond Committee) and Steve McLaughlin (MassHighway) Location: MassHighway Offices, Boston Existing Bridge - As District 5 indicated, the Bridge Section is reviewing the Lichtenstein report so they can determine which preventative repairs are warranted, if any. Temporary Bridge - They are still awaiting the Coast Guard permit as well as the third, and hopefully final, review of the 100% design plans by the bridge and highway sections. He expects to advertise for construction in January or February, assuming the permit and approvals are forthcoming. - If it were advertised, say, on February 15, they would open bids about April 1, would award the contract about June 1, and would probably start construction in mid-June. - The completion date for the bridge is very dependent upon the ability to award the contract per the time-line above. Any delay could cause construction to be delayed up to one year. With the construction start in mid-June, the completion could take between one year and 18 months depending upon whether we get an accelerated schedule approved. - The cost estimate is now $6,026,130 not including the cost of securing the right of way from the owners of the house, but including about 10% for demolition of the existing bridge. Most of this will be for construction of foundations, transportation of materials, and labor. - The temporary bridge will likely be mostly or all newly built. MassHighway will own the structure and can reuse it elsewhere. - They believe that the present proposal for bikes and pedestrians are safe.
    [Show full text]
  • Numerical Modelling and Dynamic Response Analysis of Curved Floating Bridges with a Small Rise-Span Ratio
    Journal of Marine Science and Engineering Article Numerical Modelling and Dynamic Response Analysis of Curved Floating Bridges with a Small Rise-Span Ratio Ling Wan 1,2,3, Dongqi Jiang 4,* and Jian Dai 5 1 The State Key Laboratory of Hydraulic Engineering Simulation and Safety, School of Civil Engineering, Tianjin University, Tianjin 300072, China 2 Faculty of Science Agriculture and Engineering, Newcastle University, Singapore 599493, Singapore; [email protected] 3 Newcastle Research & Innovation Institute Pte Ltd. (NewRIIS), Singapore 609607, Singapore 4 Department of Civil Engineering, School of Science, Nanjing University of Science and Technology, Nanjing 210094, China 5 Department of Marine Technology, Norwegian University of Science and Technology, 7491 Trondheim, Norway; [email protected] * Correspondence: [email protected] Received: 9 May 2020; Accepted: 17 June 2020; Published: 24 June 2020 Abstract: As a potential option for transportation applications in coastal areas, curved floating bridges with a same small specified rise to span ratio of 0.134, supported by multiple pontoons, are investigated in this paper. Two conceptual curved bridges are proposed following a circular arc shape with different span lengths (500 and 1000 m). Both bridges are end-connected to the shoreline without any underwater mooring system, while the end-connections can be either all six degrees of freedom (D.O.F) fixed or two rotational D.O.F released. Eigen value analysis is carried out to identify the modal parameters of the floating bridge system. Static and dynamic analysis under extreme environmental conditions are performed to study the pontoon motions as well as structural responses of the bridge deck.
    [Show full text]
  • 7Th ROMAN BRIDGES on the LOWER PART of the DANUBE
    th 7 INTERNATIONAL CONFERENCE Contemporary achievements in civil engineering 23-24. April 2019. Subotica, SERBIA ROMAN BRIDGES ON THE LOWER PART OF THE DANUBE Isabella Floroni Andreia-Iulia Juravle UDK: 904:624.21"652" DOI: 10.14415/konferencijaGFS2019.015 Summary: The purpose of the paper is to present the Roman bridges built across the Romanian natural border, the Danube, during the Roman Empire expansion. Some of these are less known than the famous Traian’s bridge in Drobeta Turnu Severin. The construction of bridges on the lower part of the Danube showed the importance of conquering and administrating the ancient province of Dacia. The remaining evidences prove the technical solutions used by the Roman architects at a time when public works had developed. Keywords: Danube bridges, pontoon bridge, Bridge of Constantine the Great, Columna Traiana 1. INTRODUCTION The Danube1 was once a long-standing frontier of the Roman Empire, and today flows through 10 countries, more than any other river in the world. Originating in Germany, the Danube flows southeast for 2,850 km, passing through or bordering Austria, Slovakia, Hungary, Croatia, Serbia, Romania, Bulgaria, Moldova and Ukraine before draining into the Black Sea. Romania has the longest access to the river, around 1075 km, of which 225 km on Romanian territory exclusively. | CONFERENCE PROCEEDINGS INTERNATIONAL CONFERENCE (2019) | 189 7. МЕЂУНАРОДНА КОНФЕРЕНЦИЈА Савремена достигнућа у грађевинарству 23-24. април 2019. Суботица, СРБИЈА Fig. 1 Map of the main course of the Danube During the Roman Empire many wooden or masonry bridges were built, some of which lasted longer, other designed for ephemeral military expeditions.
    [Show full text]
  • Static Behaviors of a Long-Span Cable-Stayed Bridge with a Floating Tower Under Dead Loads
    Journal of Marine Science and Engineering Article Static Behaviors of a Long-Span Cable-Stayed Bridge with a Floating Tower under Dead Loads Minseo Jang 1, Yunwoo Lee 1, Deokhee Won 2 , Young-Jong Kang 1 and Seungjun Kim 1,* 1 School of Civil, Environmental and Architectural Engineering, Korea University, Seoul 02841, Korea; [email protected] (M.J.); [email protected] (Y.L.); [email protected] (Y.-J.K.) 2 Coastal and Ocean Engineering Division, Korea Institute of Ocean Science and Technology, Busan 49111, Korea; [email protected] * Correspondence: [email protected]; Tel.: +82-2-3290-4868 Received: 14 September 2020; Accepted: 15 October 2020; Published: 20 October 2020 Abstract: Owing to the structural characteristics of floating-type structures, they can be effectively applied to overcome the limitation of conventional long-span bridges in deep water. Unlike cable-supported bridges with fixed towers, floating cable-supported bridges show relatively large displacements and rotations under the same load because of floating towers; moreover, the difference in the support stiffness causes differences in the behavior of the superstructures. In addition, the risk of overturning is greater than in conventional floating offshore structures because the center of gravity of the tower is located above the buoyancy center of the floater. A floating cable-supported bridge in which the tether supports the floating main tower is directly influenced by the tether arrangement, which is very important for the stability of the entire structure. In this study, according to the inclined tether arrangement, the outer diameter of the floater, and the buoyancy vertical load ratio (BVR), the static behavioral characteristics of the long-span cable-stayed bridges with floating tower are evaluated through nonlinear finite-element analysis.
    [Show full text]
  • Bridges Connect…
    BRIDGES CONNECT… GULIZAR OZYURT TCCE 49th ECCE General Meeting 22 – 23 May 2009 Ljubljana, Slovenia “the human being is the connecting creature who must always separate and can not connect without separating…first conceive intellectually of the merely indifferent existence of the two river banks as something separated in order to connect them by means of a bridge.” Georg Simmel • Death and Bridge • Building Bridges, Burning Bridges • Intercultural cooperation as a Bridge • Bridge connecting opposite political parties: coalition • In a dream: to make peace with others for mutual benefits • Soccer: a bridge that only men shall cross* Physically… • As a potent historical and cultural icon. • As visual proxies in popular culture and a variety of commercial media for their respective cities • Bridges inspire …paintings, songs and films and creative writings… BOSPHORUS BRIDGE First Pontoon Bridge • Constructed by architect Mandrocles from Greek island Samos by the order of Persian emperor Darius I around 500BC. • First pontoon Bridge of history over 1 km long with some 200 ships supporting roadway • Army of 70000 crossed over Europe when campaigning against Scythia. Leonardo’s Bridge • In 1502 Leonardo da Vinci did a simple drawing of a graceful bridge with a single span of approximately 240-meters. Da Vinci designed the Bridge as part of a civil engineering project for Sultan Bajazet II. The bridge was to span the Golden Horn, an inlet at the mouth of the Bosphorus River in what is now Turkey. The Bridge was never built. • A project suBmitted to Sultan Abdulhamit on NovemBer,1900. • The idea first come up Before the ottoman- Russian war in 1877- 1878 and gained significance after the concessions granted to Germany for the Baghdad railway.
    [Show full text]
  • Historic Bridges Historic Bridges 397 Survey Report for Historic Highway Bridges
    6 HISTORIC BRIDGES HISTORIC BRIDGES 397 SURVEY REPORT FOR HISTORIC HIGHWAY BRIDGES HIGHWAY FOR HISTORIC REPORT SURVEY 1901-1920 PERIOD By the turn of the century, bridge design, as a profession, had sufficiently advanced that builders ceased erecting several of the less efficient truss designs such as the Bowstring, Double Intersection Pratt, or Baltimore Petit trusses. Also, the formation of the American Bridge Company in 1901 eliminated many small bridge companies that had been scrambling for recognition through unique truss designs or patented features. Thus, after the turn of the century, builders most frequently erected the Warren truss and Pratt derivatives (Pratt, Parker, Camelback). In addition, builders began to erect concrete arch bridges in Tennessee. During this period, counties chose to build the traditional closed spandrel design that visually evoked the form of the masonry arch. Floods in 1902 and 1903 that destroyed many bridges in the state resulted in counties going into debt to undertake several bridge replacement projects. One of the most concentrated bridge building periods at a county level occurred shortly before World War I as a result of legislation the state passed in 1915 that allowed counties to pass bond issues for road and bridge construction. Consequently, several counties initiated large road construction projects, for example, Anderson County (#87, 01-A0088-03.53) and Unicoi County (#89, 86-A0068- 00.89). This would be the last period that the county governments were the most dominant force in road and bridge construction. This change in leadership occurred due to the creation of the Tennessee State Highway Department in 1915 and the passage of the Federal Aid Highway Act of 1916.
    [Show full text]
  • Assessment of the Dynamic Response of a Floating Pontoon Bridge with A
    Assessment of the dynamic response of a floating pontoon bridge with a fiber reinforced polymer superstructure C.E.M. Heuberger Assessment of the dynamic response of a floating pontoon bridge with a fiber reinforced polymer superstructure by C.E.M. Heuberger to obtain the degree of Master of Science in Civil Engineering - Hydraulic Engineering at the Delft University of Technology to be defended publicly on Thursday July 5, 2018 at 10:30 a.m. Student number: 4166272 Project duration: September 2017 - July 2018 Thesis committee: Prof. Dr. Ir. S.N. Jonkman Delft University of Technology Dr. Ir. D.J. Peters Delft University of Technology & Royal HaskoningDHV Dr. Ir. A. Jarquin Laguna Delft University of Technology Ir. E. Tromp Royal HaskoningDHV Ir. Y. Wang Royal HaskoningDHV Cover photo by S. Hansen, Bergsøysundbrua An electronic version of this thesis is available at http://repository.tudelft.nl/. Preface This thesis is the final part of my master program of Hydraulic Engineering at Delft University of Technology. My thesis is titled: ”Assessment of the dynamic response of a floating pontoon bridge with a fiber reinforced polymer superstructure”. Royal HaskoningDHV offered me the opportunity to work on this subject, for which I am very grateful. They provided me with the means and the motivation to complete this research. Many people assisted me during the process of writing this thesis. Without their help, this report would not be lying in front of you. First and foremost I would like to express my gratitude towards my graduation committee. I would like to thank Bas Jonkman for chairing the committee.
    [Show full text]
  • Connecticut River Bridges, Rev
    NEW HAMPSHIRE DIVISION OF HISTORICAL RESOURCES State of New Hampshire, Department of Cultural Resources 603-271-3483 19 Pillsbury Street, 2 nd floor, Concord NH 03301-3570 603-271-3558 Voice/ TDD ACCESS: RELAY NH 1-800-735-2964 FAX 603-271-3433 http://www.nh.gov/nhdhr [email protected] Garvin--Connecticut River Bridges, Rev. 7/2009 LIST OF HIGHWAY BRIDGES ON THE CONNECTICUT RIVER BETWEEN VERMONT AND NEW HAMPSHIRE BY 1906, WITH NOTES ON LATER SPANS The basic information in this list was obtained from Report of the Bridge Commissioners of the State of New Hampshire to the Legislature, Dec. 31, 1906 (Manchester, N.H.: John B. Clarke Company, 1906) Existing bridges are identified by New Hampshire Department of Transportation bridge coordinates, as “042/044.” [Bridges described in italics had disappeared by 1906.] 1. Hinsdale to Brattleboro, Vermont. The first bridge was built in 1804 by the Hinsdale Bridge and Sixth New Hampshire Turnpike Corporation, chartered in 1802. Frederick J. Wood in his The Turnpikes of New England (1919) says that this company “appears to have been primarily a toll-bridge corporation, although it had authority to build about ten miles of turnpike through Hinsdale and Winchester to connect with a branch of the Fifth Massachusetts [Turnpike] which was built to the state line prior to 1806.” The Hinsdale Bridge was apparently replaced several times. Hinsdale, New Hampshire (Hinsdale, N.H.: Bicentennial Committee [1976]) says that bridges here have “been carried away, by floods and ice, on the average of once in every ten years.” The corporate name was shortened to “Hinsdale Bridge Corporation” in 1853, probably reflecting the relinquishment of any turnpike road the corporation had built.
    [Show full text]
  • Design of Floating Bridge Cross Over
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 04 Issue: 12 | Dec-2017 www.irjet.net p-ISSN: 2395-0072 DESIGN OF FLOATING BRIDGE CROSS OVER M. Hari Sathish Kumar1, E. Saravanan2, S. Manikandan3, S. Akash Kumar 4 1Assistant Professor, Department of Civil Engineering, PERI Institute of Technology, Chennai 48. 2,3,4Student, Department of Civil Engineering, PERI Institute of Technology, Chennai 48 ----------------------------------------------------------------------------------------***---------------------------------------------------------------------------------------- Abstract - Economy in construction is the ultimate need impractical.As we propose to build a bridge across a for today, so we go for suitable structures to fit the natural drainage like rivers or some obstruction, we have purpose. The bridge uses floats (floating concrete) to to consider the height of piers constructed above the support a continuous or separate deck for vehicle and ground level as well as below the ground level as a part of pedestrian travel. It is used in the area where there is not foundation. When we lay piers for bridges crossing deeper feasible to suspend a bridge from anchored piers and also rivers then the height of piers would be very large. the area which has large deep sea bed. Pier-less bridge are not new to this world. During the Cholas period for their Even if the river bed is of soft bed rock then the depth invasion across rivers, they made use of trained elephants up to which the piers have to be laid under the ground that swim on the surface, over which they transported all level as foundation is also so high.
    [Show full text]
  • SR 520 Pontoon Construction Project
    WSDOT SR520 PROGRAM Pontoon Construction Project Expert Panel Report, Phase 2 Submitted to WSDOT by the Expert Panel February 18th 2013 . THE SR520 EXPERT REVIEW PANEL: Chair: John Reilly, Panel: Dr. Neil Hawkins, Dr. John Clark Mr. Tom Sherman, Mr. Mark Leonard Mr. Stephen Tatro Panel Members’ – Background (for details, See Appendix E) The Expert Panel members were selected for their expertise in the design and construction of complex concrete and pre-stressed/post-tensioned1 concrete structures. More than one member was required to have experience in floating bridges. An understanding of concrete materials and technologies was required. Current Expert Panel members are: Dr. Neil M. Hawkins, Ph.D., Dist. M. ASCE, Hon. M. ACI, Professor Emeritus, University of Illinois, and former chair of the Civil Engineering Department, University of Washington, specialist in reinforced and prestressed concrete. Dr. John H. Clark, P.E., Ph. D., a consultant for the design and construction of long-span bridges and heavy structures, including pre-stressed concrete. Mr. Tom Sherman, specialist in floating bridge design and construction, TES Enterprises Mr. Mark Leonard, FHWA Resource Center, former Bridge Engineer for the Colorado Department of Transportation. Mr. Stephen B. Tatro, consultant specializing in evaluation, testing, design, and construction of concrete structures and materials. The panel is chaired by Mr. John Reilly, P.E., C.P. Eng., with experience in major project management, contracting and delivery, risk assessment / mitigation and prestressed concrete design. Summary resumes of the Panel members can be found in Appendix E 1 Prestressing refers to beneficial stressing of the concrete structures before application of in-service loads.
    [Show full text]
  • Building Our Bridge to Fun Presentation
    Building Our Bridge to Fun! Civil Engineering in the Classroom Main Goals of this Activity • Learn about how bridges are used and why we need them • Identify forces acting on a bridge • Hands-on activity: build two type of bridges (with two type of materials) • Measure deflection of a span using LEGO ultrasonic sensor • Gather data (load vs. deflection) Introduction What is a bridge? Why do we need build bridges? Water supply Crossing rivers Traffic or water bodies 2 Engineering for bridges Construction Materials: -Concrete -Steel -Wood -Stone -Brick Bridges are structures to provide passage over water, roadways, and more! 3 Engineering for bridges: History Primitive People: Roman Empire—First Great ▪ Logs Bridge Builders ▪ Slabs of Rocks ▪ Timber Truss Bridges ▪ Intertwined Vines or Ropes ▪ Masonry Arch Bridges Nineteenth Century Europeans ▪ Modern Long Bridges ▪ Followed Roman Empire style until ▪ Moveable Bridges iron and steel was used 4 Engineering for bridges: Primitive Bridges Rock Bridges Rope Bridges Log Bridges Engineering for bridges: Loads Primary Loads acting in a bridge Weight of the bridge DEAD LOAD Traffic: cars, trucks, people Wind, snow LIVE LOAD Dynamic: earthquake and vibrations 6 Engineering for bridges: Primary forces Tension: magnitude of the pulling force that acts to lengthen an object, usually by a string, cable, or chain. Compression: a pushing force that acts to shorten the thing that it is acting on. Opposite to tension. 7 Engineering for bridges: Primary forces Demo: Use a sponge to represent a beam. When loaded with weight, the divots (holes) on top _________close and the divots (holes) on bottom _________open Conclusion: compression tension The top of a beam experiences compression__________.
    [Show full text]
  • Design Criteria for the Floating Walkways and Pontoons Considering the Extreme Climatic Conditions
    Preprints (www.preprints.org) | NOT PEER-REVIEWED | Posted: 28 July 2020 doi:10.20944/preprints202007.0663.v1 Review Design Criteria for the Floating Walkways and Pontoons considering the Extreme Climatic Conditions Sami M. Ayyad Amman Arab University (AAU), Jordan [email protected] [email protected] Abstract: Construction of Pontoons is based on multiple elements, dimensions and weight. The study has addressed about how the industry of the floating reinforcement concrete precast (pontoons) installs in the factory with the combinations of utility, electricity services, and Internet service. The pontoon bridges are successfully installed in the road for transport or sea for shops. The installation process for pontoons is successfully attempted in a balanced situation above surface of the sea to the resistant of floating precast (pontoons) to any ambient effects such as weather conditions, the movement of the waves or any others effects. The findings elaborate that it is not just a military solution. Pontoon installation can significantly serve for civil purposes. Keywords: Identification; Manufacturing; Transportation; Installation 1. Introduction The manufacturing of Pontoons is based on different materials, dimensions, and weights in marine construction to enable them to lift large weights. It has been broadly accepted that pontoon bridges are only available to the field of military engineering [1]. However, these bridges are also seen for swamps and crossing rivers purpose and; therefore, are considered as obsolete and folkloristic works. Pontoons are widely used for different purposes such as timber pontoons, concrete pontoons, and metal pontoons (steel and aluminum). It is a common dilemma that the theory and technique of the pontoon bridges are not taught in the universities [2].
    [Show full text]