The Ultimate SUV - an Amphibious Four Wheel Drive! Every Now and Then, We Run Across Interesting Outdoor Products That We've Just Got to Tell Others About

The Ultimate SUV - an Amphibious Four Wheel Drive! Every now and then, we run across interesting outdoor products that we've just got to tell others about. Perhaps a few adventurers would like to participate in the 'launch' of an exciting new amphibious vehicle based on the Jeep Wrangler.Built in China, this vehicle is less expensive than a Hummer yet capable of far more extensive off-road travel, Amphi-4wd is built from your donor Jeep. (PRWEB) August 22, 2002 -- Irvine, CA Â August 20, 2002 Â Looking for the ultimate off road vehicle? It may just be an amphibious SUV,according to earthwheels.com founder Chris Dufault. Mr. Dufault is working with a Chinese company to convert American Jeep Wranglers for onshore and offshore use. The Amphi4WD combines the rugged off road capability and creature comforts of the Jeep, with a strong corrosion resistant stainless steel hull and propeller drive. The conversion company currently modifies the Beijing Jeep for amphibious use by the Chinese military. The company is now planning to convert the US Jeep for a few lucky adventurers. The conversion will maintain all of the structural integrity, safety and emissions equipment of the Jeep and will comply with US standards. The conversions will be performed in China on privately owned US vehicles. Including transportation time, the conversion should take six months and cost just short of $20,000 plus the cost of the donor Jeep. earthwheels.com is a startup recreational product innovator. The proposed product line also includes the FOLD- N-ROLL Â the first garage-able, self-contained, solid-walled travel trailer designed for 6-cylinder front- wheel-drive minivans. If you are a free spirit looking for the most unique vehicle afloat Â go to www.earthwheels.com. Click on Amphibian to check out the amphibious 4WD and get on the waiting list. The company hopes to clear remaining engineering and regulatory hurdles by the end of the year. For more information, visit http://www.earthwheels.com or contact earthwheels founder, Chris Dufault, at 949.679.1056 at [email protected]. ### PRWeb ebooks - Another online visibility tool from PRWeb Contact Information Chris Dufault earthwheels.com http://www.earthwheels.com 949-679-1056 Online Web 2.0 Version You can read the online version of this press release here. Page 2/2 If you have any questions regarding information in these press releases please contact the company listed in the press release. Our complete disclaimer appears here - PRWeb ebooks - Another online visibility tool from PRWeb.

Copy Link

Recommended publications

Innovative Automotive Engineering Tradition in Lorch/ Württ
InnovatIve automotIve engIneerIng tradItIon In Lorch/ Württ. germanY content / edItorIaL the rIsIng of a vehIcLe manufacturer 4 BuILt by BInz 10 understandIng change 22 We would like to thank all past and present BINZ employees who contributed to this brochure. Concept: HISPLORER Photos: Works archive, Richard Truesdell, Rudolf Kwapil, Weidner GmbH content / edItorIaL Vehicle manufacturer with visions and principles BINZ has been offering its customers individual vehicle solutions for 75 years. The market has transformed, customer demands have changed and competition has transcended national borders and continents in the last few decades. Information and production technologies have accelerated processes, innovations have made cars safer and more efficient and social developments have shifted the significance of automotive transportation. BINZ has continuously gained the trust of customers by quickly adapting to new technologies and markets. Time and time again, we successfully responded to changes, since BINZ has always maintained its core values: innovative products, motivated employees with a passion for cars and taking great care of longstanding relationships with customers and cooperation partners all over the world. We would therefore like to especially thank our employees for their daily commitment, our customers for their loyalty and our partners for the collaboration. Join us for a journey in the past and experience how we became what are and what we will remain: a vehicle manufacturer with visions and principles. Lorenz Dietsche, Managing Director of BINZ GmbH & Co. KG 3 1880 1884 1890 1900 1910 the rIsIng of a vehIcLe manufacturer 4 1920 1930 1940 1950 the rIsIng of a vehIcLe manufacturer Founder with experience The history of a company steeped in tradition, which still empress wore broad-rimmed Florentine hats and therefore From 1919 until 1934, Michael Binz worked as the today proudly bears the founder's name starts with his could not be expected to enter the car by turning her head shop foreman and later as shop manager in a vehicle biography.
[Show full text]
The Saboteur
The Saboteur Norman L Dodd colonel UK Army, retired The Somerton Rayner Saboteur has been devel- 1500 cc (46 hp) model using 96 octane petrol of oped to meet the requirements for a lightweight, which up to 20 gallons can be carried giving an all terrain, amphibious vehicle, capable of carrying approximate cruising range of 200 miles. The a variety of loads. These vary from an eight man maximum speed is 50 mph on the roads or 30 mph infantry section to anti-tank guided missiles. across country carrying a total payload of 1,600 Ibs. The basic vehicle has eight small wheels fitted with The Saboteur is completely amphibious and can 20 X 12 X 8 road and cross country tyres with a be driven in the water either by its wheels or by pressure of only 3 Ibs per square inch. A light two specially fitted propellers. The water speed track can be fitted for use in deep snow. The chas- will vary between 5 and 10 mph. sis consists of two main heavy gauge aluminium The engine drives by chains onto all eight wheels box sections, toboggan shaped at the front end, through the differentials of the standard Volks- carrying stub axles and containing the drive sys- wagen gear box. There are four forward gears and tems. Four cross struts in ladder construction pro- one reverse. The main drive uses Triplex chains, vide the mounting strong points for the engine, the inter axle drive is by Duplex chains and they, gear box and other internal fittings. being of common lengths, are interchangeable.
[Show full text]
Operation and Maintenance Overview Fiscal Year 2014 Budget Estimates
OPERATION AND MAINTENANCE OVERVIEW FISCAL YEAR 2014 BUDGET ESTIMATES April 2013 OFFICE OF THE UNDER SECRETARY OF DEFENSE (COMPTROLLER) / CHIEF FINANCIAL OFFICER TABLE OF CONTENTS OVERVIEW Page MAJOR ACTIVITIES – continued Page O&M Title Summary ...............................................................1 Facilities Sustainment, Repair & Modernization and Demolition Programs ........................................................127 APPROPRIATION HIGHLIGHTS Mobilization ...........................................................................134 Army ........................................................................................6 Training and Education ..........................................................141 Navy ........................................................................................16 Recruiting, Advertising, and Examining ...............................149 Marine Corps ..........................................................................26 Command, Control, and Communications (C3) ....................153 Air Force .................................................................................31 Transportation ........................................................................157 Defense-Wide .........................................................................37 Environmental Programs .......................................................161 Reserve Forces ........................................................................39 Contract Services ...................................................................170
[Show full text]
Amphibious Vehicle
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 03 Issue: 10 | Oct -2016 www.irjet.net p-ISSN: 2395-0072 Amphibious Vehicle Prof.Anup M.Gawande1 , Mr.Akshay P. Mali 2, 1 Asst. Prof. Mechanical Engg Dept, STC SERT, Khamgaon, Maharashtra, India 2UG Student of Mechanical Engg, STC SERT ,Khamgaon, Maharashtra, India ...................................................................................................**................................................................................................ Abstract-An Amphibious vehicle is a means of must bedurable, has good properties of waterproof, transport, viable on land as well as on water even under easy to set up and easy to do the repairs in the water. It is simplymay also called as Amphibian. event of damage and Amphibious vehicle is a concept of vehicle having versatile maintenance work. usage. It can be putforward for the commercialization purpose with respect to various applications like in the Need of Amphibious Vehicle field of military andrescue operations. Researchers are About 75% of Earth‘s surface is covered by water. A working on amphibious vehicle with capability to run in vehicle that could travel on land and water adverse conditionsin efficient way. This paper focuses on couldpotentially change current transportation concept of amphibious vehicle in detail. In later stage of model. Transportation on land is very common but paper we haveexplain and described the design and on the other hand analysis of amphibious car. We have followed proper water ways are naturally available but are not design procedureand enlisted the material used in detail. considerably used relatively, and here the Capabilities of efficient amphibious vehicle will fulfil all Amphibian vehicles areproved to be beneficial.
[Show full text]
Porsche Engineering Magazine
Anniversary Issue 1/2011 Porsche Engineering Magazine a 80 years of engineering services. Time to look back? Anniversary Issue 1/2011 Porsche Engineering Magazine Sure, but not for too long. The future is waiting. Impressum About Porsche Engineering At Porsche Engineering, engineers are of a premium car manufacturer. Whether working on your behalf to come up with you need an automotive developer for new and unusual ideas for vehicles and your project or would prefer a specialist industrial products. At the request of systems developer, we offer both – be - our customers we develop a variety of cause Porsche Engineering works right solutions – ranging from the design of where these two areas meet. The exten - individual components and the layout of sive knowledge of Porsche Engi neering complex modules to the planning and converges in Weissach – and yet it is implementation of complete vehicles, glob ally available, including at your com - inclu ding production start-up manage - p any’s offices or production facili ties. ment. What makes our services special Regardless of where we work, we always is that they are based on the expertise bring a part of Porsche with us. Impressum Porsche Engineering Magazine Publisher Editor Porsche Engineering Group GmbH Frederic Damköhler Address Design: Agentur Designwolf, Stuttgart Porsche Engineering Group GmbH Repro: Piltz Reproduktionen, Stuttgart Porschestraße Printing: Leibfarth&Schwarz, Dettingen/Erms 71287 Weissach, Germany Translation: TransMission Übersetzungen, Stuttgart All rights reserved. No part of this publication may be reprodu- Tel. +49711 911- 8 88 88 ced without the prior permission of the publisher. We cannot Fax +49711 911- 8 89 99 guarantee that unrequested photos, slides, videos or manus- cripts will be returned.
[Show full text]
Complaint in This Matter
Robert H. Murphy Sanjay Wadhwa William Finkel Attorneys for Plaintiff SECURITIES AND EXCHANGE COMMISSION New York Regional Office 3 World Financial Center, Suite 400 New York, NY 10281 (212) 336-0140 (Murphy) (212) 336-1322 (fax) UNITED STATES DISTRICT COURT SOUTHERN DISTRICT OF NEW YORK 1 $EP 3 0 20811 1 Plaintiff, 08CV () v. LUIS E. PALLAIS and RODEDAWG INTERNATIONAL INDUSTRIES, INC., : COMPLAINT Defendants. Plaintiff Securities and Exchange Commission (the "Commission") alleges the following against defendants Luis E. Pallais ("Pallais") and Rodedawg International Industries, Inc. ("Rodedawg Int'l") (collectively, the "Defendants"): SUMMARY 1. Rodedawg Int'l issued numerous materially false and misleading press releases about the company's business and its future prospects. 2. Rodedawg Int'l purports to be in the business of importing and selling various types of vehicles from China, including the Rodedawg, an amphibious vehicle that is being marketed as a hybrid between a sports utility vehicle and a boat. 3. From approximately September 2005 to February 2007, Rodedawg Int'l and Pallais, its Chairman and Chief Executive Officer, issued approximately thirty press releases touting the success of its ongoing business, when, in fact, Rodedawg Int'l had no revenue or earnings. A number of these releases contained materially false information or omitted to disclose material information concerning Rodedawg Int'l's agreements with foreign distributors and the status of the company's efforts to obtain the necessary regulatory certifications. 4. By this conduct, Rodedawg Int'l and Pallais violated Section 10(b) of the Securities Exchange Act of 1934 ("Exchange Act") [15 U.S.C.
[Show full text]
Salty Bastard “What If Amphibious Mobility Wasn’T Just a Curiosity, but the Norm?” and Final Design Result Snekkja
THE YEAR IS 2050 AND THE STREETS ARE WATER, WHAT DO YOU DO? PROJECT: SALTY BASTARD “WHAT IF AMPHIBIOUS MOBILITY WASN’T JUST A CURIOSITY, BUT THE NORM?” AND FINAL DESIGN RESULT SNEKKJA “NATTEN GICK HÄN, DET GRYDDE TILL DAG, OCH DE SEGLADE STÄNDIGT.” - (Homeros’ Odyssée) OLIVER WALDERHAUG UMEÅ INSTITUTE OF DESIGN MFA TRANSPORTATION DESIGN THESIS in collaboration with SCANIA CV AB 2019 <PROJECT: SALTY BASTARD> UMEÅ ACKNOWLEDGEMENTS A SINCERE THANK YOU TO EVERYONE INVOLVED IN THIS JOURNEY First and foremost, I’d like to thank the Scania team for the support, not only throughout this project but also my internship. Kristofer for giving me the opportunity to come aboard, Ingrid for mentoring and supporting me along the way and Christian for his never wavering positivity and energy. Thank you Umeå Institute of Design, with all it’s fantastic teachers and staff for these strangely long and short years, all the way from my BFA years to now went by in a flash, yet I feel fifteen years older than when I started. It’s been a privilege to study with such a range of professional and caring people in the organisation - always putting us students in focus and doing the utmost you could to put us in our best light and on a path to success. I’ll always be grateful for that. To my classmates, you are the greatest group of people I could have imagined studying with, and I’m sure you will all go on to do great things. The sense of camaraderie we have is hard to put into words, and I have nothing but the utmost respect and love for each and every one of you.
[Show full text]
A Review on Design and Analysis of Amphibious Vehicle
International Journal of Science, Technology & Management www.ijstm.com Volume No.04, Issue No. 01, January 2015 ISSN (online): 2394-1537 A REVIEW ON DESIGN AND ANALYSIS OF AMPHIBIOUS VEHICLE Prof. P. S. Shirsath1, Prof. M. S. Hajare2, Prof. G. D. Sonawane3, Mr. Atul Kuwar4, Mr. S. U. Gunjal5 1,2,3Asst. Prof., Department of Mechanical Engineering, Sandip Foundation’s- SITRC, Mahiraavani, Trimbak Road, Nashik, Maharashtra, Savitribai Phule Pune University, Pune, Maharashtra, (India) 4Department of Mechanical Engineering, Sandip Foundation’s- SITRC, Mahiraavani, Trimbak Road, Nashik, Maharashtra, Savitribai Phule Pune University, Pune, Maharashtra, (India) 5P. G. Student, Department of Mechanical Engineering, GS Mandal’s- MIT, Aurangabad, Maharashtra, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, Maharashtra, (India) ABSTRACT An Amphibious vehicle is a means of transport, viable on land as well as on water even under water. It is simply may also called as Amphibian. Amphibious vehicle is a concept of vehicle having versatile usage. It can be put forward for the commercialization purpose with respect to various applications like in the field of military and rescue operations. Researchers are working on amphibious vehicle with capability to run in adverse conditions in efficient way. This paper focuses on concept of amphibious vehicle in detail. In later stage of paper we have explain and described the design and analysis of amphibious car. We have followed proper design procedure and enlisted the material used in detail. Capabilities of efficient amphibious vehicle will fulfil all the emerging needs of society. Success of every concept largely relies on research and development, though amphibious vehicle is yet to travel a long journey of innovative development, it has shown excellent potentials for future benefits.
[Show full text]
XBH 8X8-2 Standard Amphibious Vehicle with Folding Shelter 800Cc 8 Wheel 4 Stroke ATV
Product Description XBH 8X8-2 Standard amphibious vehicle with folding shelter 800cc 8 Wheel 4 Stroke ATV Product Description XBH 8×8-2 Standard Equipment Vehicle with folding vehicle Introduction: Body Parameters: Dimension:3160×1720×1150mm Wheel Base:670×670×670mm Track:1420mm Minimum Ground Clearance:180mm Complete Vehicle Kerb Mass:750kg Rated Load:On Land:500kg(6 People) On Water:300kg(4 People) Performance Parameters: Start Mode:Key Ignition Mode:EFI Battery Specification:12V/60Ah Drive Mode:On Land: All-wheel Drive On Water: All-wheel Drive or Outboard Drive Top Speed:On Land:45km/h On Water: 5km/h(Tyre Stroke)or 12km/h(15HP Outboard) Minimum Turning Radius:0.71m Maximum Climbing Angle:32 º Approach Angle:54 º Departure Angle:57 º Brake Mode:Caliper Hydraulic Brake Tyre Specification:25×12(11.5)-9NHS Tyre Pressure:5-7psi (34.5-48.3kPa) With Track: 3-5psi(20.7-34.5kPa) Transmission Mode:Belt and Chain Transmission Dynamic Parameters: Engine Model:SQR372 Engine Type:Vertical 3-Cylinder, Water-cooling, 4-Stroke, Inline DOHC Oil-supply Mode:MPI Cylinder Diameter ×Stroke:3-72×66.5mm Displacement:812ml Compression Ratio:9.5:1 Rated Power and Turning Speed:39kW(6000r/min) Max. Torque and Turning Speed:70N•m(3500~4000r/min) Idle Speed:900±50r/min Lubricating Mode:Pressure and Splash Lubrication Cooling Mode:Forced Circulation and Antifreeze Coolant Clutch System:CVT Transmission Type:CVT+2 Forward Gears, Neutral, Reverse Gear Fuel Type:Gasoline 93# Oil Tank Capacity:38L Others: Optional Equipment:Bumper, Drain Equipment, Traction Ball Head, Safety Belt, Rear Foot Pedal, Winch, Outboard Motor, Track, Foldable Windshield, Windshield Wiper, Anti-roll Rack, Top, Convertible Top, Utility Storage Pouch, Vehicle Cover, Alert Lamp, Four-way Overheating Prevention System, Heating System, Snow Plough, Breakwater Board etc.
[Show full text]
Study on Automobile
STUDY ON AUTOMOBILE An automobile is a wheeled vehicle that carries its own motive power for propulsion. Different types of automobiles include cars, buses, trucks, vans, and motorcycles, with cars being the most popular. The term is derived from Greek 'autos' (self) and Latin 'movére' (move), referring to the fact that it 'moves by itself'. Earlier terms for automobile include 'horseless carriage' and 'motor car'. An automobile has seats for the driver and, almost without exception, one or more passengers. Today it is the main source of transportation across ithe world. Population As of 2005 there are 500 million cars worldwide (0.074 per capita), of which 220 million are located in the United States [[1]] (0.75 per capita). Inventors The modern automobile powered by the Otto gasoline engine was invented in Germany by Carl Benz [[2]]. Even though Carl Benz is cred with the invention of the modern automobile several other German engineers work on building the first automobile at the same time. The inventors are: Carl Benz on July 3, 1886 in Mannheim [[3]], Gottlieb Daimler [[4]]and Wilhelm Maybach [[5]]in Stuttgart [[6]](also inventors of the first motor bike) and in 1888/89 Germany|German-Austrian inventor Siegfried Marcus [[7]] Vienna [[8]]. Steam powered vehicles Steam-powered self-propelled cars were devised in the late 18th century. The first self-propelled car was built by Nicolas-Joseph Cugnot [[9]] in 1769; it could attain speeds of up to 6 km/h. In 1771 he designed another steam-driven car, which ran so fast that it rammed into a wall, producing the world’s first car accident.
[Show full text]
The BTR Handbook- the Universal APC
SEP 2013 The BTR Handbook- The Universal APC TRADOC G-2 Intelligence Support Activity (TRISA) Complex Operational Environment and Threat Integration Directorate (CTID) [Type the author name] United States Army 6/1/2012 OEA Team Handbook Purpose To inform the Army training community of the large number of Soviet styled BTR (Bronetransporter) Armored Personnel Carriers (APC) found in over 70 countries. To describe the improvements made in the BTRs from the post-World War II period to the latest versions. To provide a distribution summary for each major BTR type by country. To discuss the capabilities of each group of BTRs. To enumerate each BTR version with a short description of the vehicle’s purpose. To present photographs of many of the BTR variants. Executive Summary Demonstrates the spread of the BTR to over 70 countries around the world, including much of Africa, Eastern Europe, South Asia, and the Middle East. Makes obvious that both American allies and potential foes use the BTR as a standard APC for their infantry or a support vehicle. Provides a historical perspective of the BTR and each subsequent APC generation. Lists each generation of BTR and its variants. Includes photographs of many BTR versions. Cover photos: Top photo: BTR-40 at the Batey ha-Osef museum in Tel Aviv, Israel; Wikimedia Commons; 2005. Bottom photo: BTR-80A, Wikimedia Commons, 13 September 2008. 2 UNCLASSIFIED OEA Team Handbook Map Figure 1. Countries with BTR Variants. The red stars indicate the countries where BTR variants can be found. Introduction Even though the first Soviet Bronetransporter (BTR) made its first appearance not long after the end of World War II, the BTR is still a major armored personnel carrier (APC) and weapons platform in over 70 countries around the world.
[Show full text]
The Future of Autonomous Cars a Scenario Analysis of Emergence and Adoption Master’S Thesis in Management and Economics of Innovation
The Future of Autonomous Cars A Scenario Analysis of Emergence and Adoption Master’s thesis in Management and Economics of Innovation LUDVIG BARREHAG Department of Technology Management and Economics CHALMERS UNIVERSITY OF TECHNOLOGY Gothenburg, Sweden 2018 The Future of Autonomous Cars A Scenario Analysis of Emergence and Adoption LUDVIG BARREHAG © LUDVIG BARREHAG, 2018 Technical report no E2018:114 Department of Technology Management and Economics Chalmers University of Technology SE-412 96 Göteborg Sweden Telephone +46 (0)31-772 1000 Department of Technology Management and Economics Göteborg, Sweden 2018 "The horse is here to stay, but the automobile is only a novelty – a fad," Stated by the president of the Michigan Savings Bank while advising Henry Ford's lawyer not to invest in Ford Motor Co. Something the lawyer did nonetheless which earned him the fortune of his life. Acknowledgments Several people have been of great help in the making of this study. First of all, I would like to thank Erik Bohlin, my tutor who has guided my work and continuously provided good advice in terms of structuring and making sense of the results. An extra appreciation goes to his great patience in a time when this study got put on hold. I also owe a large appreciation to Berg Insight and in particular Johan Fagerberg who made this study possible through a combination of good advice, access to extensive amount of data as well as a beautiful office to work in with an excellent coffee machine. For anyone interested in reading a market research analysis version of this study I refer to the title The Future of Autonomous Cars available at Berg Insight.
[Show full text]