Eurodekor Plus Multilayer Structures for Specification Solutions
Total Page:16
File Type:pdf, Size:1020Kb
Eurodekor Plus Multilayer structures for specification solutions. www.egger.com Eurodekor Plus Multilayer structures Mulitlayer structure boards offer a high-quality finish for surfaces subject to high levels of stress. This makes them exceptionally well-suited for use in commercial premises. Wear and tear is minimised thanks to the high abrasion resistance of Eurodekor Plus HR multilayer structures. This provides an unbelievably long service life when used in interior design. Thanks to the combination of many layers, Eurodekor Plus ML/MW boards are suitable for both vertical and horizontal use. This allows for optimal cutting when manufacturing pre-fabricated parts. The mulitlayer structure is also resistant to bending, thus making the boards particullarly well suited for constructions with large spans. This results in an infinite number of possibilites and puts the design of furniture elements in the spotlight. Applications Advantages • Furniture components which are subject to bending stress • The Eurodekor Plus multilayer structure has very good (e. g. long shelves with heavy loads) bending strength in all directions of the board • Furniture components which require shock resistance • Very good screw withdrawal resistance • Complex constructions with long spans • Very well suited for mounting fasteners and hardware • Shopfitting and interior design • Provides high shock resistance, thanks to the • Exhibition stand and stage construction multilayer structures • Good dimensional stability Product description Due to higher requirements for board surfaces e.g. The multilayer structure of the coating may consist, in office furniture, high-quality shopfitting, furniture in dependant upon requirements, of an additional overlay public buildings, worktops and other special surfaces, or several underlay papers. melamine faced chipboards require a multilayer structure. Structure variants Eurodekor Plus Board type Applications Advantages Thick- Dimensions / nesses MOQ Eurodekor Plus HR* Furniture and fittings with need for High 8 mm 2.800 × 2.070 mm increased abrasion resistance abrasion to (desks, special work surfaces) resistance 38 mm Minimum order Not available for pearl-, uni, or quantity: white-decors. 100 half boards Eurodekor Plus Furniture elements and fittings with increa- High shock 8 mm 2.800 × 2.070 mm ML/MW* sed surface requirements (fronts, doors) resistance, to ML = Multilayer structure with brown barrier very good 38 mm Minimum order paper surface quantity: MW = Multilayer structure with stability 20 half boards white barrier paper (only available for white decors) * Available on the following boards: EGGER rawboards, EGGER MDF, EGGER OSB Combiline, EGGER light weight boards HR structure Top and bottom Overlay Eurodekor Plus HR symmetrical Decor paper Highliy abrasion-resistant structure moistened with liquid melamine resin in The abrasion resistance improves an impregnation bath. This special significantly when the decor paper is quality is achieved when an increase in pressed on the core board in combinati- resin is combined with corundum. These on with an overlay. Overlays are thin, boards achieve the resistance class Board transparent paper webs, which are 3A according to EN 14322. (e. g. rawboard/MDF) ML structure (ML03) Top and bottom symmetrical Underlay Eurodekor Plus ML/MW brown Multilayer structure The special multilayer structure is overlay paper can be used to improve ab- achieved by placing several additional rasion resistance for wood and fantasy underlay/barrier papers under the decor decors. During the pressing process, the film. This enables layer thicknesses of melamine resin of the individual coated up to 1.0 mm and increased shock papers melts due to the impact of pres- resistance. If desired, an additional sure and heat to form a solid surface. MW structure (MW03) Top and bottom symmetrical Underlay white Standard Properties All Eurodekor boards satisfy the require- use in interior applications. In addition, ments of EN 14322 (except pearlescent all core boards comply with the require- decors), which describes the require- ments of relevant European manufactu- ments for melamine faced boards for ring standards. (Preliminary information) Properties* Unit Quality Standard ML/ ML/ ML/ ML/ ML/ Combi- according structure MW03 MW04 MW06 MW08 MW10 line** to Thickness struc- mm EN 14322 − 0.3 0.4 0.6 0.8 1.0 − ture / Sides *** Surface weight kg/mm² 12.5 13.1 13.6 14.2 14.8 15.3 13.7 Bending strength N/mm² EN310 18.5 28.1 34.5 41 44.9 50.2 ≥ 40 „lengthwise“ values Bending strength N/mm² EN310 ≥ 14 ≥ 23 ≥ 27 ≥ 32 ≥ 36 ≥ 39 ≥ 35 average are „diagonal“ These E-module N/mm² EN310 3500 4000 4400 4900 5200 5600 ≥ 5000 ** „lengthwise“ E-module N/mm² EN310 3200 3800 4200 4600 5100 5500 ≥ 4000 chipboards „diagonal“ faced Shock resistance N EN438-2 12 15 23 25 29 35 − melamine low 19mm Screw withdrawal N/mm² EN320 1310 1498 1359 1359 1423 1516 ≥ 1500 for are surface values Internal Bond N/mm² EN319 ≥ 0.45 ≥ 0.45 ≥ 0.45 ≥ 0.45 ≥ 0.45 ≥ 0.45 ≥ 0.55 strength These * *** A thickness tolerance of ± 0.5mm for multilayer structures should be taken into account. account. into be taken should structures multilayer ± 0.5mm for of tolerance *** A thickness Production sites FRITZ EGGER GmbH & Co. OG FRITZ EGGER GmbH & Co. OG EGGER Holzwerkstoffe Brilon Holzwerkstoffe Holzwerkstoffe GmbH & C0. KG Weiberndorf 20 Tiroler Straße 16 Im Kissen 19 6380 St. Johann in Tirol 3105 Unterradlberg 59929 Brilon Austria Austria Germany t +43 50 600-0 t +43 50 600-0 t +49 2961 770-0 f +43 50 600-10111 f +43 50 600-12100 f +49 2961 770-62222 [email protected] [email protected] [email protected] EGGER (UK) Limited EGGER Panneaux & Décors EGGER Panneaux & Décors Anick Grange Road Usine de Rion des Landes Usine de Rambervillers mistakes. Hexham, Northumberland Avenue d’Albret – BP 1 ZI Blanchifontaine and NE46 4JS 40371 Rion des Landes Cedex 01 88700 Rambervillers United Kingdom France France errors t +44 1434 602191 t +33 (0)5 58 56 81 81 t +33 (0)3 29 68 01 01 f +44 1434 605103 f +33 (0)5 58 56 81 39 f +33 (0)3 29 68 01 02 [email protected] [email protected] [email protected] specification errors, OOO Gagarinskiy Fanerniy Zavod Ezhvinsky proezd 1 printing for 215010 Gagarin, Oblast Smolensk Russia t +7 48135 79300 warranty No f +7 48135 79311 [email protected] reserved. changes 15 / 04 EN_ Technical www.egger.com/products.