DOCSLIB.ORG

Determination of Centroid

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Determination of Centroid CENTROID The following planar shape can be regarded (Fig.1). It consists of 3 shapes. For each shape the position of the centroid and the area are known. The areas are assigned with A1, A2, A3 and their centroids are C1, C2, C3 respectively. For y the particular example a coordinate system y-z A2 will be used. It will be demonstrated how to C A 2 3 find the vertical coordinate of the common C A1 C 3 centroid C. The vertical coordinates of the separate shapes are yC1, yC2 and yC3 (Fig.1). The yC2 C1 following formula is used for determining the yC3 yC1 coordinate yC: yC 3 yA. z yA..++yA y.A ∑ Ci i y ==CC11 2 2 C33 i=1 . C AA++A 3 Fig. 1 123 ∑ Ai i=1 If the figure consists of n shapes it can be written: n ∑ yACi . i i=1 yC = n . ∑ Ai i=1 Finding the horizontal coordinate of the common centroid is analogical and the general formula for a figure consisting of n shapes is: n ∑ zACi . i i=1 zC = n . ∑ Ai i=1 The following rules have to be minded when the position of the centroid has to be determined: • if the figure has one axis of symmetry the common centroid is lying on this axis; • if the figure has two or more axis of symmetry (as for instance a rectangle or a circle) the position of the common centroid is in the cross point of these axis. 1 MOMENTS OF INERTIA Moments of inertia account how an area is situated with respect to an axis. Their physical meaning is to represent how a construction can resist bending. The bigger the moment of inertia of the cross-section is the bigger are the transverse loads that can be applied to a construction. As for instance the beam shown on Fig.2 (a) can bare bigger force F than the one from Fig.2 (b) though the area of the cross-section is one and the same (A=h.b). F F h b L h L b (a) (b) Fig. 2 That can be explained by the fact that the cross-section of the first construction has bigger moment of inertia according to the horizontal axis (the bending is around this axis) which is obvious from the formulas for the moment of inertia of a rectangle given in the table below – Iz>Iy because h>b. Moments of inertia with respect to the axis passing through the centroid for some simple shapes Rectangle Square Circle y y y h z C z C z C a d b hb. 3 h3.b a4 π d 4 I = ; I = II== II== y 12 z 12 yz12 yz64 2 If the moment of inertia with respect to an axis which is not passing through the centroid has to be determined, the following formulas are used: 2 I yy* =+Ie.A, y* y 2 I zz* =+If.A, e A where A is the area of the shape, e is the distance between axis y and y*, f is the one between z and z*. This is the theorem of Steiner. The terms which are added to the moments of inertia are called z C Steiner’s additions. f As for instance for a rectangular shape (Fig.4) can be written hb. 3 z* I =+Ie22A= +e(.hb), yy* 12 Fig. 3 3 22hb. y* I zz* =+IfA= +f(.hb). 12 y e h z C f b z* Fig. 4 3 EXAMPLE For the shape shown on Fig.5 determine the position of the centroid and the principle moments of inertia. 8a Solution: The shape has one axis of symmetry that means that the centroid is lying on it. For the purpose of finding the centroid the 2a shape has to be represented as a sum of simple shapes (Fig.6) – in the particular example two rectangles and one square. Later it has to be 10a minded that because the square is hollow it has to be subtracted when determining the 2a position of the centroid and the moment of inertia. a The centroid of each shape Ci (i = 1,2,3) is 2a used as an origin of a local coordinate system 6a (Fig.6). The position of the common centroid has to be determined with respect to some auxiliary Fig. 5 coordinate system. This coordinate system can be placed anywhere but for convenience it is 8a recommended that if the shape has an axis of symmetry one of the axis of the coordinate y 1 1 system has to coincide with it. In this example z1 C1 2a this will be the vertical axis y'. The horizontal one z' will coincide with the lowest line of the 2 shape. Now the position of the centroid will be y2 found according to the auxiliary system y'z' 10a z2 C2 (Fig.6). Only the vertical coordinate of the centroid y3 2a will be searched because of the axis of z3 C3 y' a symmetry (the centroid is lying on it). 3 The following formula is used: z' 2a yA'.CC11+ y'2.A2− y'C3.A3 6a y 'C = . AA12+−A3 Fig. 6 There is minus in front of A3 because the square is hollow. The areas of the separate shapes are A1=2a.8a, A2=8a.6a, A3=2a.2a. The vertical coordinates of the centroids Ci (i=1,2,3) with respect to y'z' auxiliary coordinate system are y'C1=9a, y'C2=4a, y'C3=2a. Substitution in the formula for y 'C will lead to 4 9aa.(2 .8a) +−4a.(8a.6a) 2aa.(2 .2a) 144a33+192a−8a3328a3 ya'5====,47. C 2.a8a+−8aa.6 2.aa2 16a22+48a−4a260a2 8a Now when the position of the centroid is y1 known one can determine the principle moments of inertia with respect to y and z z1 C 1 2a axis (Fig.7). y The following can be written for the C moment of inertia Iy: z y2 10a z2 C2 Iy=Iy1+ Iy2- Iy3 . y 5,47a 3 2a z3 C3 Because the axis y, y1, y2 and y3 are a ccoinciding (they are all lying on the axis of 2a symmetry) the Steiner’s additions are equal 6a to zero. The moments of inertia of the separate shapes with respect to yi axis (i=1,2,3) are Fig. 7 (8aa)3.2 (6aa)3.8 (2a)4 I = , I = , I = . y1 12 y2 12 y3 12 Substituting in the expression for Iy will lead to 334 4 (8aa) .2 (6a) .8a(2a) 1 4442736a 4 I y =+−=(1024a+1728a−16a)==228a. 12 12 12 12 12 Before calculating the moment of inertia Iz it has to be taken into consideration that the axis z, z1, z2 and z3 are not coinciding. The distance between these axis are as follows: zz1 = 3, 53a , zz2 =1, 47a , zz3 = 3, 47a . The moments of inertia of the separate shapes with respect to zi axis (i=1,2,3) are (2aa)3.8 (8aa)3.6 (2a)4 I = , I = , I = . z1 12 z2 12 z3 12 Using this and knowing the areas of the separate shapes which were calculated earlier the expression for Iz acquires the view I =+Izz22..A+I+zzA−I+zz2.A zz()11()1( z2()22) ( z3()33) 334 ⎛⎞(2aa) .8 22⎛(8a) .6a ⎞⎛(2a) 2⎞ Iaz =+⎜⎟()3, 53 ()2a.8a+⎜+()1, 47a()8a.6a⎟−⎜+()3, 47a(2a.2a)⎟ ⎝⎠12 ⎝12 ⎠⎝12 ⎠ =+()5,3aaa44199, 4 +(256 4+103,7a4)−(1,3a4+48, 2a4)=204,7a4+359,7a4−49,5a4=514.9a4 5.
Load more

Recommended publications
  • Center of Mass and Centroids
    Center of Mass and Centroids Center of Mass A body of mass m in equilibrium under the action of tension in the cord, and resultant W of the gravitational forces acting on all particles of the body. -The resultant is collinear with the cord Suspend the body at different points -Dotted lines show lines of action of the resultant force in each case. -These lines of action will be concurrent at a single point G As long as dimensions of the body are smaller compared with those of the earth. - we assume uniform and parallel force field due to the gravitational attraction of the earth. The unique Point G is called the Center of Gravity of the body (CG) ME101 - Division III Kaustubh Dasgupta 1 Center of Mass and Centroids Determination of CG - Apply Principle of Moments Moment of resultant gravitational force W about any axis equals sum of the moments about the same axis of the gravitational forces dW acting on all particles treated as infinitesimal elements. Weight of the body W = ∫dW Moment of weight of an element (dW) @ x-axis = ydW Sum of moments for all elements of body = ∫ydW From Principle of Moments: ∫ydW = ӯ W Moment of dW @ z axis??? xdW ydW zdW x y z = 0 or, 0 W W W Numerator of these expressions represents the sum of the moments; Product of W and corresponding coordinate of G represents the moment of the sum Moment Principle. ME101 - Division III Kaustubh Dasgupta 2 Center of Mass and Centroids xdW ydW zdW x y z Determination of CG W W W Substituting W = mg and dW = gdm xdm ydm zdm x y z m m m In vector notations:
    [Show full text]
  • Dynamics of Urban Centre and Concepts of Symmetry: Centroid and Weighted Mean
    Jong-Jin Park Research École Polytechnique Fédérale de Dynamics of Urban Centre and Lausanne (EPFL) Laboratoire de projet urbain, Concepts of Symmetry: territorial et architectural (UTA) Centroid and Weighted Mean BP 4137, Station 16 CH-1015 Lausanne Presented at Nexus 2010: Relationships Between Architecture SWITZERLAND and Mathematics, Porto, 13-15 June 2010. [email protected] Abstract. The city is a kind of complex system being capable Keywords: evolving structure, of auto-organization of its programs and adapts a principle of urban system, programmatic economy in its form generating process. A new concept of moving centre, centroid, dynamic centre in urban system, called “the programmatic weighted mean, symmetric moving centre”, can be used to represent the successive optimization, successive appearances of various programs based on collective facilities equilibrium and their potential values. The absolute central point is substituted by a magnetic field composed of several interactions among the collective facilities and also by the changing value of programs through time. The center moves continually into this interactive field. Consequently, we introduce mathematical methods of analysis such as “the centroid” and “the weighted mean” to calculate and visualize the dynamics of the urban centre. These methods heavily depend upon symmetry. We will describe and establish the moving centre from a point of view of symmetric optimization that answers the question of the evolution and successive equilibrium of the city. In order to explain and represent dynamic transformations in urban area, we tested this programmatic moving center in unstable and new urban environments such as agglomeration areas around Lausanne in Switzerland.
    [Show full text]
  • Chapter 5 –3 Center and Centroids
    ENGR 0135 Chapter 5 –3 Center and centroids Department of Mechanical Engineering Centers and Centroids Center of gravity Center of mass Centroid of volume Centroid of area Centroid of line Department of Mechanical Engineering Center of Gravity A point where all of the weight could be concentrated without changing the external effects of the body To determine the location of the center, we may consider the weight system as a 3D parallel force system Department of Mechanical Engineering Center of Gravity – discrete bodies The total weight isWW i The location of the center can be found using the total moments 1 M Wx W x xW x yz G i i G W i i 1 M Wy W y yW y zx G i i G W i i 1 M Wz W z z W z xy G i i G W i i Department of Mechanical Engineering Center of Gravity – continuous bodies The total weight Wis dW The location of the center can be found using the total moments 1 M Wx xdW x xdW yz G G W 1 M Wy ydW y ydW zx G G W 1 M Wz zdW z zdW xy G G W Department of Mechanical Engineering Center of Mass A point where all of the mass could be concentrated It is the same as the center of gravity when the body is assumed to have uniform gravitational force Mass of particles 1 n 1 n 1 n n xC xi m i C y yi m i C z z mi i m i m m i m i m i i Continuous mass 1 1 1 x x dm yy dmz z dm m dm G m G m G m Department of Mechanical Engineering Example:Example: CenterCenter ofof discretediscrete massmass List the masses and the coordinates of their centroids in a table Compute the first moment of each mass (relative
    [Show full text]
  • Centroids by Composite Areas.Pptx
    Centroids Method of Composite Areas A small boy swallowed some coins and was taken to a hospital. When his grandmother telephoned to ask how he was a nurse said 'No change yet'. Centroids ¢ Previously, we developed a general formulation for finding the centroid for a series of n areas n xA ∑ ii i=1 x = n A ∑ i i=1 2 Centroids by Composite Areas Monday, November 12, 2012 1 Centroids ¢ xi was the distance from the y-axis to the local centroid of the area Ai n xA ∑ ii i=1 x = n A ∑ i i=1 3 Centroids by Composite Areas Monday, November 12, 2012 Centroids ¢ If we can break up a shape into a series of smaller shapes that have predefined local centroid locations, we can use this formula to locate the centroid of the composite shape n xA ∑ ii i=1 x = n A ∑ i 4 Centroids by Composite Areas i=1 Monday, November 12, 2012 2 Centroid by Composite Bodies ¢ There is a table in the back cover of your book that gives you the location of local centroids for a select group of shapes ¢ The point labeled C is the location of the centroid of that shape. 5 Centroids by Composite Areas Monday, November 12, 2012 Centroid by Composite Bodies ¢ Please note that these are local centroids, they are given in reference to the x and y axes as shown in the table. 6 Centroids by Composite Areas Monday, November 12, 2012 3 Centroid by Composite Bodies ¢ For example, the centroid location of the semicircular area has the y-axis through the center of the area and the x-axis at the bottom of the area ¢ The x-centroid would be located at 0 and the y-centroid would be located
    [Show full text]
  • Multidisciplinary Design Project Engineering Dictionary Version 0.0.2
    Multidisciplinary Design Project Engineering Dictionary Version 0.0.2 February 15, 2006 . DRAFT Cambridge-MIT Institute Multidisciplinary Design Project This Dictionary/Glossary of Engineering terms has been compiled to compliment the work developed as part of the Multi-disciplinary Design Project (MDP), which is a programme to develop teaching material and kits to aid the running of mechtronics projects in Universities and Schools. The project is being carried out with support from the Cambridge-MIT Institute undergraduate teaching programe. For more information about the project please visit the MDP website at http://www-mdp.eng.cam.ac.uk or contact Dr. Peter Long Prof. Alex Slocum Cambridge University Engineering Department Massachusetts Institute of Technology Trumpington Street, 77 Massachusetts Ave. Cambridge. Cambridge MA 02139-4307 CB2 1PZ. USA e-mail: [email protected] e-mail: [email protected] tel: +44 (0) 1223 332779 tel: +1 617 253 0012 For information about the CMI initiative please see Cambridge-MIT Institute website :- http://www.cambridge-mit.org CMI CMI, University of Cambridge Massachusetts Institute of Technology 10 Miller’s Yard, 77 Massachusetts Ave. Mill Lane, Cambridge MA 02139-4307 Cambridge. CB2 1RQ. USA tel: +44 (0) 1223 327207 tel. +1 617 253 7732 fax: +44 (0) 1223 765891 fax. +1 617 258 8539 . DRAFT 2 CMI-MDP Programme 1 Introduction This dictionary/glossary has not been developed as a definative work but as a useful reference book for engi- neering students to search when looking for the meaning of a word/phrase. It has been compiled from a number of existing glossaries together with a number of local additions.
    [Show full text]
  • NOTES Centroids Constructed Graphically
    NOTES CentroidsConstructed Graphically TOM M. APOSTOL MAMIKON A. MNATSAKANIAN Project MATHEMATICS! California Instituteof Technology Pasadena, CA 91125-0001 [email protected] [email protected] The centroid of a finite set of points Archimedes (287-212 BC), regarded as the greatest mathematician and scientist of ancient times, introduced the concept of center of gravity. He used it in many of his works, including the stability of floating bodies, ship design, and in his discovery that the volume of a sphere is two-thirds that of its cir- cumscribing cylinder. It was also used by Pappus of Alexandria in the 3rd century AD in formulating his famous theorems for calculating volume and surface area of solids of revolution. Today a more general concept, center of mass, plays an important role in Newtonian mechanics. Physicists often treat a large body, such as a planet or sun, as a single point (the center of mass) where all the mass is concentrated. In uniform symmetric bodies it is identified with the center of symmetry. This note treats the center of mass of a finite number of points, defined as follows. Given n points rl, r2, ..., rn, regarded as position vectors in Euclidean m-space, rela- tive to some origin 0, let wl, w2, ..., Wnbe n positive numbers regarded as weights attached to these points. The center of mass is the position vector c defined to be the weighted average given by 1 n C=- wkrk, (1) n k=1 where Wnis the sum of the weights, n Wn= wk. (2) k=l When all weights are equal, the center of mass c is called the centroid.
    [Show full text]
  • Barycentric Coordinates in Triangles
    Computational Geometry Lab: BARYCENTRIC COORDINATES IN TRIANGLES John Burkardt Information Technology Department Virginia Tech http://people.sc.fsu.edu/∼jburkardt/presentations/cg lab barycentric triangles.pdf August 28, 2018 1 Introduction to this Lab In this lab we investigate a natural coordinate system for triangles called the barycentric coordinate system. The barycentric coordinate system gives us a kind of standard chart, which applies to all triangles, and allows us to determine the positions of points independently of the particular geometry of a given triangle. Our path to this coordinate system will identify a special reference triangle for which the standard (x; y) coordinate system is essentially identical to the barycentric coordinate system. We begin with some simple geometric questions, including determining whether a point lies to the left or right of a line. If we can answer that question, we can also determine if a point lies inside or outside a triangle. Once we are comfortable determining the (signed) distances of a point from each side of the triangle, we will discover that the relative distances can be used to form the barycentric coordinate system. This barycentric coordinate system, in turn, will provide the correspondence or mapping that allows us to establish a 1-1 and onto relationship between two triangles. The barycentric coordinate system is useful when defining the basis functions used in the finite element method, which is the subject of a separate lab. 2 Signed Distance From a Line In order to understand the geometry of triangles, we are going to need to take a small detour into the simple world of points and lines.
    [Show full text]
  • Affine Invariant Points
    Affine invariant points. ∗ Mathieu Meyer, Carsten Sch¨uttand Elisabeth M. Werner y Abstract We answer in the negative a question by Gr¨unbaum who asked if there exists a finite basis of affine invariant points. We give a positive answer to another question by Gr¨unbaum about the \size" of the set of all affine invariant points. Related, we show that the set of all convex bodies K, for which the set of affine invariant points n is all of R , is dense in the set of convex bodies. Crucial to establish these results, are new affine invariant points, not previously considered in the literature. 1 Introduction. A number of highly influential works (see, e.g., [8, 10, 12], [14]-[18], [20]-[31], [37, 44, 51, 52, 58]) has directed much of the research in the theory of convex bodies to the study of the affine geometry of these bodies. Even questions that had been considered Euclidean in nature, turned out to be affine problems - among them the famous Busemann-Petty Problem (finally laid to rest in [6, 9, 56, 57]). The affine structure of convex bodies is closely related to the symmetry structure of the bodies. From an affine point of view, ellipsoids are the most symmetric convex bodies, and simplices are considered to be among the least symmetric ones. This is reflected in many affine invariant inequalities (we give examples below) where ellipsoids and simplices are the extremal cases. However, simplices have many affine symmetries. Therefore, a more systematic study for symmetry of convex bodies is needed. Gr¨unbaum, in his seminal paper [13], initiated such a study.
    [Show full text]
  • Barycentric Coordinates in Olympiad Geometry
    Barycentric Coordinates in Olympiad Geometry Max Schindler∗ Evan Cheny July 13, 2012 I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail. Abstract In this paper we present a powerful computational approach to large class of olympiad geometry problems{ barycentric coordinates. We then extend this method using some of the techniques from vector computations to greatly extend the scope of this technique. Special thanks to Amir Hossein and the other olympiad moderators for helping to get this article featured: I certainly did not have such ambitious goals in mind when I first wrote this! ∗Mewto55555, Missouri. I can be contacted at igoroogenfl[email protected]. yv Enhance, SFBA. I can be reached at [email protected]. 1 Contents Title Page 1 1 Preliminaries 4 1.1 Advantages of barycentric coordinates . .4 1.2 Notations and Conventions . .5 1.3 How to Use this Article . .5 2 The Basics 6 2.1 The Coordinates . .6 2.2 Lines . .6 2.2.1 The Equation of a Line . .6 2.2.2 Ceva and Menelaus . .7 2.3 Special points in barycentric coordinates . .7 3 Standard Strategies 9 3.1 EFFT: Perpendicular Lines . .9 3.2 Distance Formula . 11 3.3 Circles . 11 3.3.1 Equation of the Circle . 11 4 Trickier Tactics 12 4.1 Areas and Lines . 12 4.2 Non-normalized Coordinates . 13 4.3 O, H, and Strong EFFT . 13 4.4 Conway's Formula . 14 4.5 A Few Final Lemmas . 15 5 Example Problems 16 5.1 USAMO 2001/2 .
    [Show full text]
  • Centroid of a Triangle
    analytic geometry (part 2) analytic geometry (part 2) Medians MPM2D: Principles of Mathematics Consider ∆ABD below. Centroid of a Triangle J. Garvin J. Garvin— Centroid of a Triangle Slide 1/17 Slide 2/17 analytic geometry (part 2) analytic geometry (part 2) Medians Medians The line segment AC, connecting vertex A to the midpoint Example of BD, is called a median. In ∆ABD, BC = CD . If ∆ABC has an area of 12 cm2. | | | | A median connects a vertex to the midpoint of its opposite Determine the area of ∆ABD. side. A median divides a triangle into two smaller triangles that have equal areas. These triangles may be congruent, but only when the triangle is equilateral or isosceles. 2 Since AABC = 12, AABD = 2 12 = 24 cm . J. Garvin— Centroid of a Triangle J. Garvin— Centroid of a Triangle × Slide 3/17 Slide 4/17 analytic geometry (part 2) analytic geometry (part 2) Medians Medians Consider ∆ABC with vertices at A(6, 7), B( 3, 1) and To determine an equation for a line segment containing a − C(9, 5) below, and the median from A. median from a specific vertex, we must first determine the − midpoint of the opposite side. In the case of the median from A, we want MBC . 3 + 9 1 + ( 5) M = − , − BC 2 2 = (3, 2) − Now we know two points on the median: A and MBC . Use these to calculate the slope of the median. 2 7 m = − − AM 3 6 − = 3 J. Garvin— Centroid of a Triangle J. Garvin— Centroid of a Triangle Slide 5/17 Slide 6/17 analytic geometry (part 2) analytic geometry (part 2) Medians Medians Once the slope is calculated, use it and either point to solve We can construct the medians from B and from C using the for the equation of the line.
    [Show full text]
  • Centroids Introduction • the Earth Exerts a Gravitational Force on Each of the Particles Forming a Body
    Centroids Introduction • The earth exerts a gravitational force on each of the particles forming a body. These forces can be replace by a single equivalent force equal to the weight of the body and applied at the center of gravity for the body. • The centroid of an area is analogous to the center of gravity of a body. The concept of the first moment of an area is used to locate the centroid. 5 - 2 Centroids • Centroid of mass – (a.k.a. Center of mass) – (a.k.a. Center of weight) – (a.k.a. Center of gravity) • For a solid, the point where the distributed mass is centered • Centroid of volume, Centroid of area xM xm x dm yM ym y dm Center of Gravity of a 2D Body • Center of gravity of a plate • Center of gravity of a wire M y xW xW x dW M y yW yW y dW 5 - 7 Centroids &First Moments of Areas & Lines • Centroid of an area • Centroid of a line xW x dW xgM g x dM xW x dW M V tA) dM dV tdA x La x adL xAt x tdA xL x dL xA x dA Q y yL y dL first moment with respect to y yA y dA Q x first moment with respect to x 5 - 8 First Moments of Areas and Lines • An area is symmetric with respect to an axis BB’ if for every point P there exists a point P’ such that PP’ is perpendicular to BB’ and is divided into two equal parts by BB’.
    [Show full text]
  • Centroid and Moment of Inertia 4.1 Centre of Gravity 4.2 Centroid
    MODULE 4 Centroid and Moment of Inertia 4.1 Centre of Gravity Everybody is attracted towards the centre of the earth due gravity. The force of attraction is proportional to mass of the body. Everybody consists of innumerable particles, however the entire weight of a body is assumed to act through a single point and such a single point is called centre of gravity. Every body has one and only centre of gravity. 4.2 Centroid In case of plane areas (bodies with negligible thickness) such as a triangle quadrilateral, circle etc., the total area is assumed to be concentrated at a single point and such a single point is called centroid of the plane area. The term centre of gravity and centroid has the same meaning but the following d ifferences. 1. Centre of gravity refer to bodies with mass and weight whereas, centroid refers to plane areas. 2. centre of gravity is a point is a point in a body through which the weight acts vertically downwards irrespective of the position, whereas the centroid is a point in a plane area such that the moment of areas about an axis through the centroid is zero Plane area ‘A’ G g2 g1 d2 d1 a2 a1 Note: In the discussion on centroid, the area of any plane figure is assumed as a force equivalent to the centroid referring to the above figure G is said to be the centroid of the plane area A as long as a1d1 – a2 d2 = 0. 4.3 Location of centroid of plane areas Y Plane area X G Y The position of centroid of a plane area should be specified or calculated with respect to some reference axis i.e.
    [Show full text]