DOCSLIB.ORG

Charlotte Community Toolbank Master Inventory

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Charlotte Community Toolbank Master Inventory Charlotte Community ToolBank Master Inventory To place a tool order, click here. To apply to be a member agency, click here. For more information on the ToolBank, please call us at 704.469.5800. Tool Type Category Subcategory Retail Value Quantity Weekly Tool Handling Fee Adjustable wrench: large Carpentry Wrenches $10.46 75 $0.31 Adjustable wrench: small Carpentry Wrenches $9.56 71 $0.29 Air compressor Power Tools Power Tools $374.00 2 $11.22 Auger, 2 person (includes 8 in bit) Power Tools Power Tools $519.00 3 $15.57 Axe Earthwork Landscaping $29.79 21 $0.89 Band Saw: portable electric Power Tools Power Tools $219.00 2 $6.57 Bar clamp: up to 18in Carpentry Hand Tools $11.48 14 $0.34 Blower: backpack gas-powered Earthwork Landscaping $299.00 6 $8.97 Blower: handheld electric Power Tools Power Tools $67.65 12 $2.03 Blower: handheld gas-powered Power Tools Power Tools $149.00 9 $4.47 Bolt cutters Carpentry Saws & Cutting $19.97 5 $0.60 Bottle jack: hydraulic Carpentry Hand Tools $35.00 3 $1.05 Bow saw Earthwork Landscaping $9.97 26 $0.30 Brick Hammer Carpentry Drywall & Masonry $13.96 5 $0.42 Brick Trowel Carpentry Drywall & Masonry $11.71 23 $0.35 Broom: push Custodial Cleanup $16.65 34 $0.50 Broom: sweep Custodial Cleanup $8.82 34 $0.26 Buck saw Carpentry Saws & Cutting $10.97 34 $0.33 Bulb planter Earthwork Landscaping $3.97 10 $0.12 Caulk gun Carpentry Hand Tools $2.98 46 $0.09 Cement trowel: pointing Carpentry Hand Tools $5.97 36 $0.18 Cement trowel: rectangular Carpentry Drywall & Masonry $10.73 11 $0.32 Chainsaw: electric corded Power Tools Power Tools $99.00 5 $2.97 Chainsaw: gas-powered Power Tools Power Tools $219.00 4 $6.57 Chair: folding Special Events Special Events $24.95 146 $0.75 Chalk line and chalk Carpentry Measuring/Marking $4.96 9 $0.15 Circular saw Power Tools Power Tools $99.00 31 $2.97 Cultivator: long handle Earthwork Landscaping $15.97 27 $0.48 Digging bar Earthwork Digging $31.97 23 $0.96 Dirt tamper Earthwork Digging $31.65 26 $0.95 Drill: corded 3/8 in chuck Power Tools Power Tools $49.97 21 $1.50 Drill: cordless Power Tools Power Tools $175.00 58 $5.25 Drill: drywall screwgun (corded) Power Tools Power Tools $79.00 3 $2.37 Drop cloth: canvas Painting Painting $14.99 40 $0.45 Drywall square: 48 in Carpentry Drywall & Masonry $11.98 2 $0.36 Drywall trowel: narrow 5-8in Carpentry Drywall & Masonry $5.97 18 $0.18 Drywall trowel: wide 10-12in Carpentry Drywall & Masonry $7.27 20 $0.22 Dust pan Custodial Cleanup $4.79 78 $0.14 Ear mufflers Safety Safety $9.97 46 $0.30 Edger: rotary Earthwork Landscaping $29.97 8 $0.90 Extension cord: 25 ft Power Tools Power Cords $18.97 32 $0.57 Extension cord: 50 ft Power Tools Power Cords $24.97 38 $0.75 Updated 9/17/2015 Charlotte Community ToolBank Master Inventory Extension cord: 100 ft Power Tools Power Cords $39.97 20 $1.20 Extension cord: power block Power Tools Power Cords $17.87 5 $0.54 Extension pole: 4ft Painting Painting $5.98 70 $0.18 Fan: drum Power Tools Power Tools $169.99 1 $5.10 Floor scraper Carpentry Hand Tools $14.42 14 $0.43 Fubar: small Carpentry Hand Tools $29.97 6 $0.90 Furniture dolly Custodial Cleanup $19.99 2 $0.60 Gas can: gas/oil mix - 1 gal Earthwork Landscaping $11.98 19 $0.36 Gas can: unleaded - 1 gal Earthwork Landscaping $11.98 16 $0.36 Gas can: unleaded-5 gal. Earthwork Landscaping $29.99 1 $0.66 Generator: 5500w / 240v Power Tools Power Tools $1,899.00 3 $56.97 Grinder: 4 1/2 in wheel Power Tools Power Tools $74.00 4 $2.22 Hack saw Carpentry Saws & Cutting $9.94 14 $0.30 Hammer drill: corded Power Tools Power Tools $160.00 8 $4.80 Hammer drill: cordless Power Tools Power Tools $200.00 1 $6.00 Hammer: 2-4 lb demolition Carpentry Hammers $17.46 73 $0.52 Hammer: framing Carpentry Hammers $13.46 49 $0.40 Hammer: standard claw Carpentry Hammers $7.48 134 $0.22 Hand Cultivator Earthwork Landscaping $3.97 160 $0.12 Hand sander (sheetrock) Carpentry Drywall & Masonry $6.48 7 $0.19 Hand trowel Earthwork Landscaping $3.97 231 $0.12 Hand truck: appliance Special Events Special Events $339.99 1 $10.20 Hand truck: standard Special Events Special Events $49.00 2 $1.47 Hard hat: chain saw Safety Safety $45.98 2 $1.38 Hard hat: standard Safety Safety $6.97 58 $0.21 Heat gun: electric Painting Painting $39.97 4 $1.20 Hedge shears Earthwork Landscaping $21.98 60 $0.66 Hedge shears: electric Power Tool - $49.99 10 $1.50 Hedge trimmer: gas powered Power Tools Power Tools $289.00 4 $8.67 Hex wrench set: English and metric Carpentry Wrenches $7.96 19 $0.24 Hoe: 2-prong Earthwork Digging $15.97 26 $0.48 Hoe: garden Earthwork Landscaping $9.97 83 $0.30 Ice chest / cooler Special Events Special Events $32.90 32 $0.99 Impact driver: 18v compact Power Tools Power Tools $185.00 9 $5.55 Jackhammer: electric Power Tools Power Tools $1,299.00 1 $38.97 Jig saw Power Tools Power Tools $69.00 17 $2.07 Kneepads (pair) Safety Safety $10.97 32 $0.33 Ladder: extension 16 ft Ladders Extension $107.00 14 $3.21 Ladder: extension 20 ft Ladders Extension $156.00 4 $4.68 Ladder: extension 24 ft Ladders Extension $189.00 3 $5.67 Ladder: platform 4 ft Ladders A-frame "$82.00 4 $2.46 Ladder: platform 6 ft Ladders A-frame $122.00 6 $3.66 Ladder: step 6 ft Ladders A-frame $59.00 33 $1.77 Ladder: step 8 ft Ladders A-frame $82.00 13 $2.46 Ladder: step Little Giant Ladders A-frame $399.80 21 $12.00 Lawnmower: gas Power Tools Power Tools $240.00 2 $7.20 Level: 2ft Carpentry Measuring/Marking $10.97 35 $0.33 Level: 4ft Carpentry Measuring/Marking $15.99 44 $0.48 Level: post Carpentry Measuring/Marking $3.97 9 $0.12 Level: torpedo Carpentry Measuring/Marking $3.97 62 $0.12 Lopper Earthwork Landscaping $26.78 93 $0.80 Machete Earthwork Landscaping $14.99 35 $0.45 Magnetic pickup tool Custodial Cleanup $9.97 6 $0.30 Mallet: rubber Carpentry Hammers $4.97 14 $0.15 Updated 9/17/2015 Charlotte Community ToolBank Master Inventory McLeod tool Earthwork Landscaping $39.97 8 $1.20 Measuring wheel Carpentry Measuring/Marking $31.95 1 $0.96 Mitre saw (and mitre box) Carpentry Saws & Cutting $13.46 25 $0.40 Mitre saw: compound chop Power Tools Power Tools $219.00 5 $6.57 Mitre saw: compound sliding Power Tools Power Tools $379.00 4 $11.37 Mixing tub Carpentry Drywall & Masonry 3.97 10 $0.12 Mortar hoe Earthwork Landscaping $29.97 22 $0.90 Mud tray Carpentry Drywall & Masonry $4.25 2 $0.13 Nail apron (cloth) Carpentry Hand Tools $1.98 50 $0.06 Nailer: finish (pneumatic) Carpentry Pneumatics $67.00 3 $2.01 Nailer: framing (pneumatic) Carpentry Pneumatics $249.00 1 $7.47 Nailer: pin (pneumatic) Carpentry Pneumatics $98.99 4 $2.97 Nailer: roofing - coil (pneumatic) Carpentry Pneumatics $169.00 1 $5.07 Paint can hook Painting Painting $1.97 18 $0.06 Paint can key Painting Painting $0.99 133 $0.03 Paint scraper Painting Painting $7.97 86 $0.24 Paint scraper: 5-in-1 tool Painting Painting $5.97 4 $0.18 Paint tray Painting Painting $3.81 93 $0.11 Pallet jack Special Events Special Events $399.00 1 $11.97 Pick axe: cutter mattock Earthwork Digging $29.97 13 $0.90 Pick axe: pick mattock Earthwork Digging $31.97 47 $0.96 Pipe wrench: large Carpentry Wrenches $10.96 5 $0.33 Pipe wrench: small Carpentry Wrenches $7.95 9 $0.24 Pitchfork: long handle Earthwork Landscaping $34.97 44 $1.05 Pitchfork: short D-handle Earthwork Landscaping $24.97 30 $0.75 Planer: portable electric Power Tools Power Tools $129.99 1 $3.90 Plastic bucket: 2.5 qt Custodial Buckets $1.67 15 $0.05 Plastic bucket: 5 gal Custodial Buckets $4.98 142 $0.15 Plastic bucket: 5 qt Custodial Buckets $2.78 13 $0.08 Plastic bucket: 10 qt Custodial Buckets $4.47 15 $0.13 Pliers: channel lock Carpentry Pliers $12.96 83 $0.39 Pliers: needle nose Carpentry Pliers $8.99 62 $0.27 Pliers: regular Carpentry Pliers $5.98 65 $0.18 Pliers: vise grip Carpentry Pliers $12.94 30 $0.39 Pole saw: electric corded Earthwork Landscaping $129.99 1 $3.90 Pole saw: electric cordless Earthwork Landscaping $99.00 3 $2.97 Pole saw: manual Earthwork Landscaping $39.93 7 $1.20 Post driver Earthwork Landscaping $26.00 1 $0.78 Post hole digger Earthwork Digging $24.97 36 $0.75 Power strip (6 outlets) Special Events Special Events $2.97 25 $0.09 Pressure washer: gas powered Power Tools Power Tools $329.00 5 $9.87 Projector Special Events Special Events $445.00 1 $13.35 Projector screen Special Events Special Events $149.99 1 $4.50 Pruner (hand-held) Earthwork Landscaping $16.97 97 $0.51 Pruning saw: D-handle Earthwork Landscaping $20.97 5 $0.63 Pruning saw: folding Earthwork Landscaping $19.88 5 $0.60 Pulaski axe Earthwork Landscaping $37.85 17 $1.14 Putty knife: 1-2in wide Painting Painting $5.97 58 $0.18 Putty knife: 3-4in wide Painting Painting $6.97 35 $0.21 Rake: asphalt/landscaping Earthwork Landscaping $36.66 3 $1.11 Rake: bow / iron Earthwork Landscaping $15.13 468 $0.45 Rake: leaf Earthwork Landscaping $12.40 475 $0.37 Ratchet strap Safety Safety $9.97 12 $0.30 Reciprocating saw: corded Power Tools Power Tools $99.00 19 $2.97 Updated 9/17/2015 Charlotte Community ToolBank Master Inventory Reciprocating saw: cordless Power Tools Power Tools $195.00 15 $5.85 Roller cage: 4in Painting Painting $1.79 67 $0.05 Roller cage: 9in Painting Painting $3.57 567 $0.11 Router: fixed base Power Tools Power Tools $169.00 6 $5.07 Safety cone Safety Safety $13.47 0 $0.40 Safety glasses: standard Safety Safety $5.96 425 $0.18 Sander: belt Power Tools Power Tools $99.97 5 $3.00 Sander: finishing electric Power Tools Power Tools $79.99 3 $2.40 Sander: palm - square pad Power Tools Power Tools $39.97 4 $1.20 Sander: random orbital 5 in Power Tools Power Tools $69.00 12 $2.07 Sanding block
Load more

Recommended publications
  • Air Staple Gun 13-32Mm Capacity
    INSTRUCTIONS FOR: AIR STAPLE GUN 13-32MM CAPACITY MODEL NO: SA789.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY Refer to Wear ear Wear eye Wear instruction protection protection protective manual gloves WARNING! DO NOT use the nail gun if damaged, has missing parts or is thought to be faulty. Contact your Service Agent. WARNING! Never engage in horseplay with the tool. WARNING! Always wear approved eye, face and hand protection when operating the nail gun. Wear a full face shield if stapling produces metal filings or wood chips. WARNING! Check correct air pressure is maintained and not exceeded. We recommend 60 to 100psi. WARNING! Keep hands, face, feet and all parts of the body away from the firing head at all times. DO NOT use the nail gun for a task it is not designed to perform. DO NOT operate the nail gun near flammable substances or flammable containers. DO NOT use the nail gun unless you have been instructed in its use by a qualified person. DO NOT carry the nail gun by the air hose, or pull the hose from the air supply.
    [Show full text]
  • NARROW GAUGE on a Shelf BUILD the STREAMLINED "TRAIN of TOMMOROW" a FREIGHT ~4~ STATION, "
    Fall 1979 NARROW GAUGE ON A SHELf BUILD THE STREAMLINED "TRAIN OF TOMMOROW" A FREIGHT ~4~ STATION, " . ,~. :",,,,,, STEP·BY ·STEP "----_iII_!MODEL Fall 1979 Vol. 1~, No. 1. RAILROADING / Publishers Nick Siegel 4 NARROW GAUGE ON THE FRONT RANGE Sal Pizzoferrato Colorado's mountain railroads on a two-foot shelf Executive Editor: Robert Schleicher 10 A FREIGHT HOUSE (AND TWO "FREEBIES") IN HO SCALE Associate Editors: Bill Wright How to make the common kits into something special Albin Burroughs 16 STEAM POWER ON THE TONAPAH Charles Heperrle Railroads designed with the modeler in mind Managing Editor: Joe K. LeFort 20 DOUBLE-POWER DIESELS Art Director: Michael Minnix Top-notch power from Tyco's "toy" locomotives Assistant Art Director: Cricket Smith 32 THE TRAIN OF TOMORROW A snap-together model of an incredible train Production Editor: Vickie Petersen 38 BUILD A DOME-OBSERVATION CAR Typography: Type-Tronics, Inc. How-to build a fitting end to a streamliner 46 SIMPLE STRIPING FOR CARS & LOCOMOTIVES Model Railroading is published four-times a Two-color paint schemes and decaJ stripes the easy way year by Eastwood Publishing Company, 2901 50 TRACKPLAN: THE ROMFORD & JOLIET RAILROAD Blake St., Denver, CO 80205. Price per single Real railroading operation in just 4x8 feet copy is $2.50, $3.00 in Ca nada. SubSCri ptions are $9.00 in the U.S. or Canada. Unsoljcited 52 CONTAINER CARS man uscripts or photogra phs should be Some authentic pieces of rolling stock from the steam era accompanied by return postage and 58 KIT-CONVERSION: BUILD TWO CONTAINER CARS Eastwood Publishing Company assumes no Usin g kits and ready-builts to make one-off replicas responsibility for the loss or damage of such material.
    [Show full text]
  • Operator's Manual Describes Safety and International Symbols and Pictographs That May Appear on This Product
    Operator’s Manual MFT 26 2-Cycle Multi-function Tool SAVE THESE INSTRUCTIONS SERVICE DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE. For assistance regarding the assembly, operation or maintenance of the unit, please call 1-844-786-7335 (in the United States) or contact email box [email protected] . Warranty service is available through an authorized service center. To locate a service center in your area, please write us email or call the number listed above. Service on this unit, both within and after the warranty period, should only be performed by an authorized and approved service center. When servicing, use only identical replacement parts. All information, illustrations, and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. The product may vary slightly from the illustrations contained in this manual. IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions. MFT 26 / 00 2017/03 SAFETY The purpose of safety symbols is to attract your attention to SPARK ARRESTOR NOTE possible dangers. The safety symbols, and their explanations, NOTE: For users on U.S. Forest Land and in the states of deserve your careful attention and understanding. The safety California, Maine, Oregon and Washington. All U.S. Forest Land warnings do not by themselves eliminate any danger. The and the state of California (Public Resources Codes 4442 and instructions or warnings they give are not substitutes for proper 4443), Oregon and Washington require, by law that certain internal accident prevention measures.
    [Show full text]
  • National Warehouse Retailer Tools - MODESTO - July 11Th
    10/01/21 02:25:32 National Warehouse Retailer Tools - MODESTO - July 11th Auction Opens: Fri, Jul 6 11:37am PT Auction Closes: Wed, Jul 11 6:30pm PT Lot Title Lot Title MW7000 DeWalt Jump Starter & Digital Air Compressor MW7030 Stanley Riveter MW7001 Husky Gravity Feed Spray Gun Kit MW7031 Stanley Box Cutter MW7002 Husky 8 in 1 Portable Jump Start with Hand MW7032 Husky Reactionless Ratchet H4120 Generator MW7033 Stud Finder MW7003 Ryobi Cordless Hand Vac MW7034 25' Measuring Tapes MW7004 Husky 60-Piece 1/4 in and 3/8 in. Drive MW7035 Speed Out Titanium Damaged Screw Extractor Universal Mechanics Tool Set MW7036 Husky 3/8 in. Compressor Shut-Off Kit MW7005 Anvil 2 Gal. Pancake Air Compressor and Accessory Kit MW7037 Stud Sensor HD35 MW7006 Husky 6-Piece 100 Position Double Ratcheting MW7038 25' Stanley Measuring Tape Wrench Set MW7039 35' and 16' Measuring Tape MW7007 Husky Impact Sockets MW7040 DeWalt Hammer MW7008 Universal Line for Trimming Grass MW7041 Utility Knives MW7009 Universal Line for Trimming Grass MW7042 25'and16' Measuring Tapes MW7010 Bosch Hole Saw MW7043 DeWalt Wood Chisel MW7011 HDX 14 in. Tile Cutter MW7044 Wiss Snipps MW7012 Tungsten Carbide Router Bits MW7045 Stanley Surform MW7013 Milwaukee Hole Saw MW7046 Rubbermaid 48" Wall Panel MW7014 Stanley 16' Tape Measure MW7047 Rubbermaid 48" Wall Panel MW7015 DeWalt Staple Gun MW7048 Rubbermaid 48" Wall Panel MW7016 Husky Siphon Feed Spray Gun MW7049 Rubbermaid 48" Wall Panel MW7017 Stanley Saw MW7050 Facet Supply Line MW7018 Universal Line for Trimming Grass MW7051 Ryobi
    [Show full text]
  • F36 & F46 Manual
    OPERATOR’S SAFETY AND SERVICE MANUAL F36 F46 This manual covers the following serial numbers and higher, for each model listed: F36 . 3620751. F46 . 4620500 . WALK-BEHIND TROWELS MBW, Inc. MBW Europe Ltd. 250 Hartford Rd • PO Box 440 Units 2 & 3 Cochrane Street Slinger, WI 53086-0440 Bolton BL3 6BN, England Phone: (262) 644-5234 Phone: + 44 (0) 01204 387784 Fax: (262) 644-5169 Fax: + 44 (0) 01204 387797 L21237.08.20.E Email: [email protected] Email: [email protected] ©MBW, Inc. 2015 Website: www.mbw.com Website: www.mbweurope.com Printed in the USA TABLE OF CONTENTS SAFETY INFORMATION . 1 Changing Trowel Blades . 8 Introduction . 1 Setting Safety Switch . 8 Setting Tilt Arm Carriage Bolt Height . 8 Safety Precautions . 1 Safety Decals . 1 SERVICE . .9 Safety Decals - EZ Pitch/Low Vibration Handle . 3 Torque Chart . 9 SPECIFICATIONS. 4 Service Tools . 9 Gearbox Disassembly . 9 OPERATION . 5 Gearbox Assembly . 9 Introduction . 5 Handle Removal/Installation. 10 Before Starting & Operating . 5 Gas Spring Replacement . 10 Starting Engine . 5 Low Vibration handle Cable Replacement . 11 Operating . 5 Shorting Wire Replacement . 11 Blade Pitch Adjustment (Standard). 5 Spider Bushing Removal . 11 Blade Pitch Adjustment (E-Z Pitch) . 5 Spider Bushing Replacement. 12 Handle Bar Adjustment. 5 Parts Replacement Cycles and Tolerances . 12 Stopping Engine . 6 REPLACEMENT PARTS. .13 MAINTENANCE . 7 Gearbox Assembly . 14 Maintenance Schedule . 7 Spider Assembly . 16 Fluid Levels. 7 Drive Assembly . 18 Engine Maintenance . 7 Guard Assembly. 20 Engine Oil . 7 Standard Handle Assembly . 22 Engine Speed . 7 Low Vibration Handle Assembly. 24 Cleaning . 7 EZ Pitch Handle Assembly.
    [Show full text]
  • Metalwork & Woodwork Saws
    HAMMERS - ANVILS - METALWORK & WOODWORK SAWS C HAMMERS BENCH PIN & ANVIL 77 CABLE TACKER GUN 76 DAVID USE PHOTO COPING SAWS 79 SD0010 FRETSAW BLADES 79 FRETSAW FRAMES 79 O HAMMER S & MALLETS 72 - 74 HACKSAWS 76 - 77 MINITURE ANVILS 74 MINITURE PINS 75 MALLET MITRE BOXES 82 PIERCING SAW BLADES 78 PIERCING SAW FRAMES 78 N DAVID USE PHOTO PIN PUSHERS 75 SD0010 RAZOR SAWS 81 SAW BLADE LUBRICANT 78 SAW KNIFE BLADES 81 STAPLE GUNS 75 - 76 V-BLOCK & CLAMPS 77 WEB STRETCHER 82 T ANVILS WOOD SAWS 80 - 81 X-ACTO RAZOR SAWS 81 DAVID USE PHOTO ZONA RAZOR SAWS 79 SD0010 E SAWS N DAVID USE PHOTO SD0010 T V BLOCK & CLAMP DAVID USE PHOTO SD0010 S Last Revised 04/07/2011 71 SQUIRES MODEL & CRAFT TOOLS HAMMERS & MALLETS MAGNETIC TACK HAMMER 6oz a specially designed hammer having one striking face magnetised for use when fitting small nails JEWELLERS MALLET a lightweight stainless steel mallet similar and upholstery tacks. The head features a claw for removing to those used by watchmakers and jewellers, with a solid head and tacks, the striking surface is a magnetic split pattern. The head is knurled shaft. hardened and pol- Length 145mm. ished. Fitted on a Weight 2½oz. hickory handle. Weight 6oz, length overall CODE TYPE PRICE 265mm. HA0025 Jewellers Mallet.................................................... £3.99 WATCHMAKERS MALLET a lightweight jewellers and watch- CODE TYPE PRICE makers mallet with a solid brass head. The handle is 260mm long 051-006 Magnetic Tack Hammer 6oz................................. £14.99 and has an increased diameter and is knurled for extra grip.
    [Show full text]
  • Landscape Tools
    Know your Landscape Tools Long handled Round Point Shovel A very versatile gardening tool, blade is slightly cured for scooping round end has a point for digging. D Handled Round Point Shovel A versatile gardening tool, blade is slightly cured for scooping round end has a point for digging. Short D handle makes this an excellent choice where digging leverage is needed. Good for confined spaces. Square Shovel Used for scraping stubborn material off driveways and other hard surfaces. Good for moving small gravel, sand, and loose topsoil. Not a digging tool. Hard Rake Garden Rake This bow rake is a multi-purpose tool Good for loosening or breaking up compacted soil, spreading mulch or other material evenly and leveling areas before planting. It can also be used to collect hay, grass or other garden debris. Leaf rake Tines can be metal or plastic. It's ideal for fall leaf removal, thatching and removing lawn clippings or other garden debris. Tines have a spring to them, each moves individually. Scoop Shovel Grain Shovel Has a wide aluminum or plastic blade that is attached to a short hardwood handle with "D" top. This shovel has been designed to offer a lighter tool that does not damage the grain. Is a giant dust pan for landscapers. Edging spade Used in digging and removing earth. It is suited for garden trench work and transplanting shrubs. Generally a 28-inch ash handle with D-grip and open-back blade allows the user to dig effectively. Tends to be heavy but great for bed edging.
    [Show full text]
  • Design of Post Hole Digger Machine
    International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 3 Issue 3, March - 2014 Design of Post Hole Digger Machine Asst. Prof. S. Rajkumar1 , Tibey V Samuel2, K. P. Arunkumar 3, Sanju Paul Kurian 4 1, 2,3,4. Department of Mechanical Jay Shriram Group of Institution Tirupur-638660 Abstract— Conventionally digging a deep holes or larger diameter holes requires more work and rime.so in order to reduce this losses we are planning to design a post hole digger machine for Kamco Tera-trac 4W tractor. Post hole digger machine is used to reduce the man work and time for digging holes. These holes can be used for fixing electric post and different plantation such as rubber plant, coconut, sugar cane etc. For rigid power and support, machine is attached to Kamco Tera-trac 4W tractor by means of PTO (power take off) shaft and three point linkage. PTO shaft of the tractor act as a basic power input and three point linkage provide a rigid support to the machine. Guarded shaft is used to transfer power from PTO shaft to the digger machine. Blades are provided at the end of the machine is used foe digging holes. Various type of holes can be created by using different diameter and length of blades. For designing Post hole digger machine, Creo parametric 1.0 software is used. Creo is 3D mechanical CAD software in which Drafting and assembly can be done easily. Kamco Tera-Trac 4W KOHLER LOMBARDINI Engine Keywords— PTO, tractor, Guarded shaft, blades. KDW 702 Diesel engine, water-cooled, I.
    [Show full text]
  • The Broadfork
    The BroadFork Many gardeners and growers, especially those working on heavy soils, face the difficulty of deeply compacted soil and want to loosen and aerate it without bringing lower layers to the surface. On a field scale there are tractor-based solutions, but how to tackle the task in the smaller plot? The BroadFork is designed to be at least part of the solution! (The Glaser Bio cultivator (414) has the same objective.) Here are some of Eliot Coleman’s comments from his book The New Organic Grower:– “This two-handled deep tillage tool is known by different names, but broadfork comes as close to describing it as any other. Like most agricultural tools its genesis surely dates far back in agricultural history. It consists of a 2-foot wide spading fork with a 5-foot-long handle at either side of the fork. The teeth on the fork are spaced 4 inches apart and are about 12 inches long . The tines are designed with a parabolic shape and curve down from an attachment point at the back of the crossbar. This difference is the key. The parabolic curve . works with an easy, rolling motion. As the handles are pulled down, the tines curve under and lift the soil easily. “The broadfork is held with the handles tilted slightly forward of vertical. It is pressed into the soil as far as possible by stepping on the crossbar, then the two handles are pulled back towards the operator in an easy rocking motion. The broadfork is then lifted from the loosened soil, the operator steps backwards 6 inches, and the manoeuvre is repeated..
    [Show full text]
  • Guide to Concrete Repair Second Edition
    ON r in the West August 2015 Guide to Concrete Repair Second Edition Prepared by: Kurt F. von Fay, Civil Engineer Concrete, Geotechnical, and Structural Laboratory U.S. Department of the Interior Bureau of Reclamation Technical Service Center August 2015 Mission Statements The U.S. Department of the Interior protects America’s natural resources and heritage, honors our cultures and tribal communities, and supplies the energy to power our future. The mission of the Bureau of Reclamation is to manage, develop, and protect water and related resources in an environmentally and economically sound manner in the interest of the American public. Acknowledgments Acknowledgment is due the original author of this guide, W. Glenn Smoak, for all his efforts to prepare the first edition. For this edition, many people were involved in conducting research and field work, which provided valuable information for this update, and their contributions and hard work are greatly appreciated. They include Kurt D. Mitchell, Richard Pepin, Gregg Day, Jim Bowen, Dr. Alexander Vaysburd, Dr. Benoit Bissonnette, Maxim Morency, Brandon Poos, Westin Joy, David (Warren) Starbuck, Dr. Matthew Klein, and John (Bret) Robertson. Dr. William F. Kepler obtained much of the funding to prepare this updated guide. Nancy Arthur worked extensively on reviewing and editing the guide specifications sections and was a great help making sure they said what I meant to say. Teri Manross deserves recognition for the numerous hours she put into reviewing, editing and formatting this Guide. The assistance of these and numerous others is gratefully acknowledged. Contents PART I: RECLAMATION'S METHODOLOGY FOR CONCRETE MAINTENANCE AND REPAIR Page A.
    [Show full text]
  • Depave Guide Replacing Impervious Parking Lot with Green Spaces
    a little less grey a little more green The Depave Guide replacing impervious parking lot with green spaces Depave a program of Cuyahoga River Restoration Content adapted from, and in partnership with, Depave of Portland, OR • depave.org Based on “How to Depave: A Guide to Freeing Your Soil” by Depave Adapted with permission, and with grateful acknowledgment to the Depave team in Portland, OR © 2017 Cuyahoga River Community Planning 1299 Superior Ave E, Cleveland, OH 44114 Made possible with a grant from the Ohio Environmental Education Fund Ohio Environmental Protection Agency GETTING FROM GREY TO GREEN WE’VE GOT WAY TOO MUCH PAVED IMPERVIOUS SURFACE. IT’S MAKING OUR CITIES FLOOD AND OUR STREAMS UNHEALTHY. Impervious surface that covers our roads, parking lots, driveways, and roofs is the most widespread obstacle to protecting water quality in rivers and streams. It causes flooding and has significant negative effects on the environment. Parking lots are a major problem, not just in urban areas but everywhere. Aside from increasing runoff volume, parking lots contribute nutrient and chemical contaminants from road salt, degraded asphalt, worn tire treads, automotive fluids, fertilizers, and herbicides. They also increase the heat island effect, making buildings nearby, and automobiles parking there, use more energy to cool down. As a typical example, 31% of the land in Cuyahoga County in Northeast Ohio is covered in impervious surface. Parking lots represent 14% of that total. The Center for Watershed Protection sets 25% impervious as the level above which serious damage is done to water quality. If we could convert half of that 14% to absorptive greenspace, we could reach the point where we can protect rather than degrade our water, air, and human health.
    [Show full text]
  • Report OCTOBER 15, 2011 10/15/2011 Catalog Page: 1
    report OCTOBER_15,_2011 10/15/2011 Catalog Page: 1 Lot # Quan Description Lot # Quan Description ------ ---- ------------------------------ ------ ---- ------------------------------ 1 1 STIHL Chain Saw 52 1 Rims, Hub Caps & Wheel Chucks 2 1 STIHL 084AV Chain Saw 53 1 Lathe & Stand 3 1 STIHL MS290 Chain Saw 54 1 Power Hacksaw 4 1 Paint Sprayer 55 1 READING Tool Box 5 1 Blower 56 1 TRUKBOX 6 1 20 Ton Hyd Jack 57 1 TRUKBOX 7 1 20 Ton Hyd Jack 58 1 Window Door 8 1 Trimmer 59 1 Breaker 9 1 STIHL 032AV Chain Saw 60 1 Breaker 10 1 Rims & Transmission 61 1 Breaker 11 1 Grill 62 1 Bits 12 1 3 Chain Saws 63 1 Utility Sharpener 13 1 Ladder Rack 64 1 Floor Jack 14 1 Tool Boxes & Contents 65A 1 1 Ton Chain Hoist 15 1 Cutting Edge 65B 1 1 Ton Chain Hoist 16 1 Saw & Power Tools 65C 1 1 Ton Chain Hoist 17 1 Table Saw & Power Tools 65D 1 1 Ton Chain Hoist 18 1 Pumps 66A 1 Porta Power 19 1 Crate-Hooks 66B 1 Porta Power 20 1 MILWAULKEE Power Tools 66C 1 Porta Power 21 1 Compressor 67A 1 Socket Set 22 1 RYOBI Cordless Tool Set 67B 1 Socket Set 23 1 Sound System 67C 1 Socket Set 24 1 Jack 67D 1 Socket Set 25 1 Tonneau Cover 67E 1 Socket Set 26 1 Lot- Transits/ Tripods 68A 1 (3) 36" Bolt Cutters 27 1 Band Saw 68B 1 (3) 36" Bolt Cutters 28 1 Table Saw 69A 1 3 Boxes Padlocks 29 1 Torch Cart, Torches & Tanks 69B 1 3 Boxes Padlocks 30 1 Cement Chute 70 1 Box of Mixers 31 1 CRAFTSMAN Welder 71A 1 Cordless Drill 32 1 Pallet- Pumps 71B 1 Cordless Drill 33 1 Pallet- Misc.
    [Show full text]