DOCSLIB.ORG

TECHNICAL COMMITTEE on WOOD and CELLULOSIC MATERIALS PROCESSING NFPA 664 Second Draft Meeting Agenda January 29-30, 2019 8:00 AM – 5:00 PM ET St

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
TECHNICAL COMMITTEE on WOOD and CELLULOSIC MATERIALS PROCESSING NFPA 664 Second Draft Meeting Agenda January 29-30, 2019 8:00 AM – 5:00 PM ET St TECHNICAL COMMITTEE ON WOOD AND CELLULOSIC MATERIALS PROCESSING NFPA 664 Second Draft Meeting Agenda January 29-30, 2019 8:00 AM – 5:00 PM ET St. Petersburg Marriott Clearwater 12600 Roosevelt Boulevard, North St. Petersburg, FL Note: Continental breakfast will be provided each day starting at 7:30 AM. Lunch will be provided on the first day. 1. Welcome. Jason Reason, Chair 2. Introductions and Update of Committee Roster. (Attachment A) 3. Approval of Meeting Minutes from March 14-15, 2018. (Attachment B) 4. Staff updates. Laura Moreno, NFPA Staff a) Committee membership update. b) Fall 2019 revision cycle schedule. (Attachment C) c) Overview of NFPA Process. 5. Review of Public Comments. (Attachment D) 6. Review of Committee Input. (Attachment E) 7. Review of First Draft Ballot Comments. (Attachment F) 8. Task Group Reports. • Forest Products and Biomass Feedstocks and Outdoor Storage (Committee Inputs 3 and 4). Jason Reason (chair), Stephen Dale, John Lysy, and Arthur Mattos • Section A.5.4.1 (Committee Input 10). John Cholin • Reorganization (Committee Input 14). Jason Reason, John Lysy, Jack Osborn, and John Cholin • Process Hazard Analysis vs. Dust Hazard Analysis. Ashok Dastidar, Francois Tanguay, and Brice Chastain 9. New Business. • Items identified by Walt Frank (Attachment G) o Inconsistency between 8.2.3.1.3, 8.2.3.1.4, and 7.3.2 o Deflagration hazard vs explosion hazard area criterion o Repetition in 11.2.1.2 and 11.2.1.3 10. Next Meeting. 11. Adjourn. Attachment A Address List No Phone 12/12/2018 Laura E. Moreno Wood and Cellulosic Materials Processing CMD-WOO Combustible Dusts Jason P. Reason SE 8/5/2009 Robert C. Berry I 7/24/1997 Chair CMD-WOO Principal CMD-WOO Lewellyn Technology AIG 2518 Thorium Drive, Apt 3 1508 Beech Circle Greenwood, IN 46143 Wilkesboro, NC 28697-2602 Brice Chastain U 8/5/2009 John M. Cholin SE 1/1/1992 Principal CMD-WOO Principal CMD-WOO Georgia-Pacific LLC J. M. Cholin Consultants Inc. 889 West Seven Mile Road 101 Roosevelt Drive Pamplico, SC 29583 Oakland, NJ 07436 Alternate: Richard F. Masta Alternate: Peter L Senez Stephen E. Dale I 08/09/2012 Ashok Ghose Dastidar SE 8/9/2011 Principal CMD-WOO Principal CMD-WOO Cincinnati Insurance Company Fauske & Associates, LLC 6200 South Gilmore Road 16W070 83rd Street Fairfield, OH 45014-5141 Burr Ridge, IL 60527-5802 Alternate: James N. Yeater Randal R. Davis M 7/14/2004 Scott E. Dillon SE 10/28/2014 Principal CMD-WOO Principal CMD-WOO IEP Technologies/HOERBIGER Crane Engineering 417-1 South Street 2355 Polaris Lane North, Suite 120 Marlborough, MA 01752-3149 Plymouth, MN 55447-4777 Alternate: Peter Karalis Dennis W. Eaves I 7/24/1997 Sam W. Francis U 7/1/1996 Principal CMD-WOO Principal CMD-WOO Beecher Carlson American Wood Council 3415 Kingsland Circle 1 Dutton Farm Lane Berkeley Lake, GA 096-6170 West Grove, PA 19390 Alternate: Kenneth E. Bland Dan A. Guaricci M 4/1/1997 Matthew B. Janick I 08/03/2016 Principal CMD-WOO Principal CMD-WOO ATEX Explosion Protection, L.P. Acadia Insurance 2629 Waverly Barn Road, Suite 121 1 Acadia Commons Davenport, FL 33897 PO Box 9010 Westbrook, ME 04098 Peter Levitt M 4/17/1998 John Lysy I 9/30/2004 Principal CMD-WOO Principal CMD-WOO Sternvent Division of Durex, Inc. AmTrust North America 5 Stahuber Avenue 20 Saint Laurent Dr Union, NJ 07083-5086 Hudson, NH 03051-3207 1 Address List No Phone 12/12/2018 Laura E. Moreno Wood and Cellulosic Materials Processing CMD-WOO Combustible Dusts Arthur P. Mattos, Jr. SE 04/04/1997 Ken J. Mayeaux U 04/16/1999 Principal CMD-WOO Principal CMD-WOO TUV SUD America Inc./Global Risk Consultants International Paper Company 3216 Tatting Road Global Risk Management Matthews, NC 28105-7181 1740 International Drive Tower 4, Room 7-035 Memphis, TN 38197 Bruce McLelland M 08/11/2014 Jeremy Miller I 08/17/2018 Principal CMD-WOO Principal CMD-WOO Fike Corporation Liberty Mutual 704 SW 10th Street 2687 Catawba Drive NW Blue Springs, MO 64015-4263 Kennesaw, GA 30152 Alternate: Adam Morrison Alternate: Paul G. Parker Timothy J. Myers SE 4/14/2005 Jeffrey C. Nichols M 03/07/2013 Principal CMD-WOO Principal CMD-WOO Exponent, Inc. Industrial Fire Prevention LLC 9 Strathmore Road PO Box 2046 Natick, MA 01760-2418 Milledgeville, GA 31059 Alternate: Sean O'Hern Brian Noe E 08/09/2012 Jack E. Osborn M 3/4/2009 Principal CMD-WOO Principal CMD-WOO City Of Oshkosh Airdusco, Inc. 5156 David Drive 4739 Mendenhall Road South Oshkosh, WI 54903 Memphis, TN 38141-8202 Matthew Paine I 12/08/2015 Jeffrey S. Patton II I 08/03/2016 Principal CMD-WOO Principal CMD-WOO FM Global The Hanover Insurance Group 1151 Boston-Providence Turnpike Hanover Specialty Industrial Property Norwood, MA 02062-9102 10480 Little Patuxent Parkway, Suite 500 Alternate: Harvey Eng Columbia, MD 21044 Jeffrey R. Roberts I 04/08/2015 James C. Stewart I 1/17/1997 Principal CMD-WOO Principal CMD-WOO AXA XL/Global Asset Protection Services, LLC Marsh Risk Consulting 128 Twin Oaks Drive Three James Center Brandon, MS 39047-9027 1051 East Cary Street, Suite 900 Alternate: Philippe Reid Richmond, VA 23219 Francois Tanguay U 3/15/2007 Erdem A. Ural SE 3/4/2009 Principal CMD-WOO Principal CMD-WOO Louisiana Pacific Canada Ltd. Loss Prevention Science & Technologies, Inc. 426, Victoria, Suite 110-3 659 Pearl Street, Suite A2 Saint-Lambert, QC J4P 3R2 Canada Stoughton, MA 02072 Alternate: Kerry D. Miller 2 Address List No Phone 12/12/2018 Laura E. Moreno Wood and Cellulosic Materials Processing CMD-WOO Combustible Dusts Daniel E. VanderHyde,Jr. E 08/09/2012 Allen Wagoner M 3/4/2009 Principal CMD-WOO Principal CMD-WOO Grand Rapids Fire Prevention Bureau FLAMEX, Inc. 38 Lagrave Avenue SE 4365 Federal Drive Grand Rapids, MI 49503-4206 Greensboro, NC 27410 Kenneth E. Bland U 1/1/1990 Harvey Eng I 4/14/2005 Alternate CMD-WOO Alternate CMD-WOO American Wood Council FM Global 222 Catoctin Circle SE, Suite 201 165 Commerce Valley Drive Leesburg, VA 20175 Thornhill, ON L3T 7V8 Canada Principal: Sam W. Francis Principal: Matthew Paine Peter Karalis M 10/29/2012 Richard F. Masta U 8/2/2010 Alternate CMD-WOO Alternate CMD-WOO IEP Technologies Georgia-Pacific LLC 417-1 South Street 133 Peachtree Street, 7th Floor Marlborough, MA 01752-3149 Atlanta, GA 30303 Principal: Randal R. Davis Principal: Brice Chastain Kerry D. Miller U 08/09/2012 Adam Morrison M 08/11/2014 Alternate CMD-WOO Alternate CMD-WOO Louisiana Pacific Building Products, Inc. Fike Corporation 414 Union Street, Suite 2000 704 SW 10th Street Nashville, TN 37219-1757 Blue Springs, MO 64015-4263 Principal: Francois Tanguay Principal: Bruce McLelland Sean O'Hern SE 12/07/2018 Paul G. Parker I 1/10/2008 Alternate CMD-WOO Alternate CMD-WOO Exponent Liberty Mutual Property 9 Strathmore Road 4287 Arbor Club Drive Natick, MA 01760 Marietta, GA 30066 Principal: Timothy J. Myers Principal: Jeremy Miller Philippe Reid I 03/07/2013 Peter L Senez SE 08/17/2015 Alternate CMD-WOO Alternate CMD-WOO Global Asset Protection Services, LLC JENSEN HUGHES 390, 43rd Avenue 13900 Maycrest Way, Suite 135 Lachine, PQ H8T 2H9 Canada Richmond, BC V6V 3E2 Canada Principal: Jeffrey R. Roberts JENSEN HUGHES Principal: John M. Cholin James N. Yeater I 03/03/2014 Marvin Lewiton E 08/09/2012 Alternate CMD-WOO Nonvoting Member CMD-WOO Cincinnati Insurance Company Massachusetts Department of Labor Standards 401 South East Street 37 Shattuck Street PO Box 39 Lawrence, MA 01843-1343 Vanlue, OH 45890 Principal: Stephen E. Dale 3 Address List No Phone 12/12/2018 Laura E. Moreno Wood and Cellulosic Materials Processing CMD-WOO Robert W. Nelson SE 7/1/1994 Laura E. Moreno 9/13/2017 Member Emeritus CMD-WOO Staff Liaison CMD-WOO 28 Wing Road National Fire Protection Association PO Box 418 One Batterymarch Park Pocasset, MA 02559 Quincy, MA 02169-7471 4 Attachment B TECHNICAL COMMITTEE ON WOOD AND CELLULOSIC MATERIALS PROCESSING NFPA 664 First Draft Meeting Minutes March 14-15, 2018 8:00 AM – 5:00 PM ET Atlanta Marriott Marquis 265 Peachtree Center Avenue, Atlanta, GA Attendees Committee Members: Jason Reason, Chair Lewellyn Technology Brice Chastain Georgia-Pacific LLC John Cholin J. M. Cholin Consultants, Inc. Stephen Dale Cincinnati Insurance Company Ashok Dastidar Fauske & Associates, LLC Randal Davis IEP Technologies/Hoerbiger Dennis Eaves Beecher Carlson Dan Guaricci* ATEX Explosion Protection, L.P. Matthew Janick Acadia Insurance Peter Levitt Sternvent Division of Durex, Inc. John Lysy AmTrust North America Arthur Mattos TUV SUD America Inc./Global Risk Consultants Ken Mayeaux International Paper Company Bruce McLelland* Fike Corporation Timothy Myers* Exponent, Inc. Jeffrey Nichols Industrial Fire Prevention LLC Jack Osborn Airdusco, Inc. Matthew Paine* FM Global Francois Tanguay Louisiana Pacific Canada Ltd. Allen Wagoner FLAMEX, Inc. Jeffrey Patton II The Hanover Insurance Group Kenneth Bland American Wood Council Richard Masta Georgia-Pacific LLC Kerry Miller Louisiana Pacific Building Products, Inc. Laura Moreno, Staff Liaison National Fire Protection Association Guests: Martin Clouthier Jensen Hughes *Participated by teleconference 1. Call to Order. Jason Reason, Chair, called the meeting to order at 8:01 AM on March 14. 2. Introductions. Attendees introduced themselves and identified their affiliation. 3. Approval of Second Draft Meeting Minutes. The Second Draft meeting minutes from July 14-15, 2015 were approved with one change- to replace “downdraft tables” with “abort gates” in item 6.0. (Note that the Correlating Committee minutes from October 27-29, 2015 were attached to the meeting agenda) 4.
Load more

Recommended publications
  • AP42 Chapter 9 Reference
    1 AP-42 Section Number: 9.9.1 Reference Number: 3 Title: Review Of Compliance Monitoring Programs With Respect To Grain L.I /p' Elevators, Final Report \ J Midwest Research Institute March 1980 ,. 2. .\ .#. ., .-?. , ,/ , , .. : 'I . I., .. , ,.. / MIDWEST RESEARCH..-*--*--- REVIEW OF CONPLLLYCE MONITORIXTG PXOGRAiiS WITH XESPECT TO GUIX ELEVtZORS .. \ FINAL REPORT Date Prepared: ?larch 24, 1980 ET3 Contract No. 68-01-4139. Task Xcs. 12 and 1& MRI Project Nos. 4310-i(12 and 14) EO r Division of Stationary Scurse Enforcement E.3. Environmental Protection Agency 401 14 Street, S.W. Fiashington, D .Z. ?.Ob60 Attn: Robert i. King MIDWEST RESEARCH INSTITUTE 425 VOLKER.BOULEVARD, KANSAS CITY, MISSOURI 64110 0 816 753-7600 .. I II EPA REVIEW NOTICE 1 t This report has been reviewed and approved by the Environ- mental Protection Agency. Approval does not signify that the contents necessarily reflect the views and policies of the government, nor does mention of trade names or cmr- cia1 products constitute endorsement or recommendation for i use. I I I I I I I i MRI -NORTH STAR LABORATORIES 10701 Red Circle Drive, Minnetonka. Minnesota 55343 - 612 933-7880 I MRI WASHINGTON,D.C. 20006-Suite 250,1750K Street, N.W.* 202 293-3800 REVIEW OF COMPLIANCE MONITORING PROGRAMS WITH RESPECT TO GRAIN ELEVATORS FINAL REPORT Date Prepared: March 24, 1980 EPA Contract No. 68-01-4139, Task Nos. 12 and 14 MXI Project Nos. 4310-L(12 and 14) For Division of Stationary Source Enforcement U.S. Environmental Protection Agency 401 M Street, S.W. Washington, D.C. 20460 Attn: Robert L.
    [Show full text]
  • 2019 Combustible Dust Incident Report Copyright © 2020 | Dutsafetyscience.Com | All Rights Reserved
    Join The Community Visit The Database Listen To The Podcast 2019 COMBUSTIBLE DUST INCIDENT REPORT COPYRIGHT © 2020 | DUTSAFETYSCIENCE.COM | ALL RIGHTS RESERVED ALUMINUM DUST EXPLOSION AT PIGMENT PLANT Jönköping, Sweden Pg. 13 NFPA 652 DHA REQUIREMENTS FOR OWNERS AND OPERATORS Featured Podcast Pg. 20 COMBUSTIBLE DUST INCIDENT DATA Jan. to Dec. 2019 Pg. 35 TABLE OF CONTENTS LETTER FROM THE AUTHOR ........................................................... 1 REPORT SUMMARY ................................................................................... 2 INCIDENT DATA Materials Involved .................................................................................... 3 Industries Involved ...................................................................................4 Equipment & Causes ................................................................................ 5 2019 OSHA Citations ................................................................................ 7 HIGHLIGHTED INCIDENTS Metal Dust Explosion at University in Beijing, China ..........................................9 Grain Silo Dust Explosion in Clinton, Iowa ......................................................... 10 Woodworking Plant Dust Explosion in Anzegem, Belgium .............................. 11 Dust Collector Explosion at Biorefinery in Cloverdale, Indiana ..................... 12 Aluminum Dust Explosion at Pigment Plant in Jönköping, Sweden ............ 13 Boiler Explosion at Pharmaceutical Facility in Andhra Pradesh, India ......... 15 Grinder Explosion
    [Show full text]
  • Joe Radniecki, PE Project Manager
    PROFESSIONAL BACKGROUND Joe Radniecki, PE Project Manager REPRESENTATIVE EXPERIENCE AIR HANDLING Kiln Pre-Heat Burner Replacements, United States Steel Corp: Responsible for the design and detailed mechanical and structural drawings and specifications for natural gas fired burner and air systems to replace the existing components and improve emissions, efficiency and throughput. Mr. Radniecki served as project manager and lead mechanical engineer. Dust Collection System Installations, United States Steel Corp: EDUCATION Complete mechanical and structural design and specifications for several Bachelor of Science in Mechanical dust collection systems to improve fugitive emissions and plant environmental conditions. Mr. Radniecki served as project manager and Engineering, University of Minnesota, lead mechanical engineer. 1990 CERTIFICATION MATERIAL HANDLING Process Safety Management Hazard Woodroom Infeed & Debarking System, Sappi Fine Paper: Analysis (HAZOP) Mr. Radniecki served as project manager responsible for replacement of woodroom infeed wood handling, deicing conveyor, and bark removal systems as part of a large mill conversion project. Responsibilities included PROFESSIONAL COURSES installation of a large electric pedestal mounted wood handling crane and (3) ASME B31.1 Power Piping Design rotary debarkers as well as significant modifications to infeed conveying and ASME B31.3 Chemical Piping Design deicing systems. EXPERIENCE Chipper and Screening System Upgrade, Sappi Fine Paper: Prior to starting at SPA in 2015, Joe Team was responsible for the installation and startup of a new 5000 tpd Radniecki had been a mechanical chipping and screening line in the company’s wood processing facility. Mr. engineer and project manager at a large Radniecki served as lead mechanical engineer as well as outage and industrial manufacturing facility (1990- startup coordinator.
    [Show full text]
  • Owner S Manual
    BD9:AL&-&' K6G>67A:HE::9EA6C:G$ BDJA9:GL>I=HI6C9 DLC:GHB6CJ6A ;DGBD9:AHB6CJ;68IJG:9H>C8:($%. E]dcZ/(+%,()"()-'Dca^cZIZX]c^XVaHjeedgi/iZX]"hjeedgi5h]de[dm#W^o 8DENG><=IB6G8=!'%%.7NLDD9HID8@>CI:GC6I>DC6A!>C8#G:K>H:96J<JHI!'%%.IG L6GC>C</CDEDGI>DCD;I=>HB6CJ6AB6N7:G:EGD9J8:9>C6CNH=6E:DG;DGBL>I=DJI I=:LG>II:C6EEGDK6AD;LDD9HID8@>CI:GC6I>DC6A!>C8# &&(..8G Eg^ciZY^cIV^lVc Model W1812 Variable Speed Planer/ Moulder With Stand Manual Update Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz Improvements to this machine were made since the manual was originally printed, and this manual update covers those changes. Keep this page with your owner's manual in case you ever need to refer to it. New and Updated Parts Added For improved shipping stability, we added an updated shipping brace system, which is shown We have added a series of parts to the Model as the numbered items in Figure 2. W1812. For increased machine safety, we added a chain guard shown as item 86 in Figure 1. For increased leadscrew stability, we added the col- 210-1 lar shown as item 95V2. 211 244 211 Updated 207 on Page 48 240V2 210-2 211 86 Updated on Page 47 211 207 95V2 Updated on Page 45 Figure 2. W1812 shipping brace system. REF PART # DESCRIPTION 86 X1812086 SAFETY GUARD 95V2 X1812095V2 COLLAR V2.10.09 207 XPN02 HEX NUT 5/16-18 210-1 XPB03 HEX BOLT 5/16-18 X 1 210-2 XPB12 HEX BOLT 5/16-18 X 1-1/4 211 XPW07 FLAT WASHER 5/16 240V2 X1812240V2 BRACKET V2.10.09 Figure 1.
    [Show full text]
  • 25 Point Combustible Dust Inspection Guide
    25 Point Combustible Dust Inspection Guide Application | These guidelines apply to woodworking operations with a potential risk of explosion. There is no restriction on the size of the work area. Codes and Regulations National Fire Protection Association (NFPA) Wood dust is broken into two categories: deflagrable wood dust and dry nondeflagrable wood dust. Deflagrable Dry Nondeflagrable Deflagrable wood dust is defined as wood particulate that will Dry Nondeflagrable wood dust is defined as wood particulate with a propagate a flame front, thus presenting a fire or explosion hazard, mass median particle size greater than 500 microns (material that will when suspended in air, or the process-specific oxidizing medium over not pass through a U.S. No. 35 Standard Sieve), having a moisture a range of concentrations, regardless of particle size or shape; wood content of less than 25 percent (wet basis). particulate with a mass median particle size of 500 microns or smaller (material that will pass through a U.S. No. 35 Standard Sieve), having a moisture content of less than 25 percent (wet basis). Wood-derived materials include but are not limited to sawdust, planer shavings, hoggings, wood flour, and moulder waste. Fire Prevention Act CHAPTER F-13 “building” means a structure used or intended to be used for supporting or sheltering any use or occupancy; 30(1)The Lieutenant-Governor in Council may make regulations (d) prescribing building standards and fire prevention standards, New Brunswick Regulation 82-20, Fire Prevention and Inspection
    [Show full text]
  • Cartridge Dust Collector System Operation's Manual
    CARTRIDGE DUST COLLECTOR SYSTEM OPERATION’S MANUAL INDUSTRIAL VACUUM EQUIPMENT CORP. N7959 BIRCH RD. IXONIA, WI 53036 www.industrialvacuum.com REVIEW THIS MANUAL BEFORE OPERATING THE DUST COLLECTOR SYSTEM 20000 DUST COLLECTOR OPERATION’S MANUAL ELECTRIC SKID MODEL TABLE OF CONTENTS SECTION 1: GENERAL INFORMATION AND INSTALLATION INSTRUCTIONS 1.1 EQUIPMENT VIEW AND IDENTIFICATION 1.2 INSPECTION OF EQUIPMENT 1.3 UNLOADING THE DUST COLLECTION SYSTEM 1.4 SETTING UP THE DUST COLLECTION SYSTEM 1.5 CONNECTING COMPRESSED AIR SUPPLY 1.6 CONNECTING ELECTRICAL SUPPLY 1.7 CONNECTING FILTER SPRINKLER SYSTEM SECTION 2: OPERATIONS AND SHUTDOWN INSTRUCTIONS 2.1 INITIAL START-UP PROCEDURES 2.2 OPERATING THE DUST COLLECTION SYSTEM 2.3 EFFECTIVE OPERATIONS AND CONSIDERATIONS 2.4 SHUTDOWN PROCEDURE 2.5 EMERGENCY SHUT DOWN PROCEDURE SECTION 3: MAINTENANCE AND TROUBLESHOOTING INSTRUCTIONS 3.1 ROUTINE MAINTENANCE 3.2 CARTRIDGE REMOVAL AND INSTALLATION 3.3 CARTRIDGE REMOVAL/INSTALLATION VIEW AND IDENTIFICATION 3.4 ROTARY VALVE DISCHARGE SYSTEM 3.5 TROUBLESHOOTING 3.6 TECHNICAL SUPPORT AND CONTACT INFORMATION SECTION 4: SPECIFICATIONS AND OPTIONAL EQUIPMENT 4.1 EQUIPMENT DATA 4.2 CERTIFIED LIFTING DIAGRAM 4.3 MAGNETIC PARTICLE TEST DATA 4.4 OPTIONAL ACCESSORIES SECTION 5: MAJOR COMPONENTS AND REFERENCE INFORMATION 5.1 MOTOR AND STARTER 5.2 CENTRIFUGAL FAN 5.3 ELECTRICAL COMPONENTS 5.4 WIRING SCHEMATICS SECTION 6: WARRANTY AND SERVICE NOTES SECTION 7: SPARE PARTS LIST SECTION 8: UL TESTING REPORT 20000 DUST COLLECTOR OPERATION’S MANUAL ELECTRIC SKID MODEL SECTION 1: GENERAL INFORMATION AND INSTALLATION INSTRUCTIONS 1.1 EQUIPMENT VIEW AND IDENTIFICATION SPECIAL INFORMATION ABOUT THE CARTRIDGE DUST COLLECTOR SYSTEM Each Dust Collection System is built with standard equipment options, but also can be built with specific customized features.
    [Show full text]
  • Woodworking Glossary, a Comprehensive List of Woodworking Terms and Their Definitions That Will Help You Understand More About Woodworking
    Welcome to the Woodworking Glossary, a comprehensive list of woodworking terms and their definitions that will help you understand more about woodworking. Each word has a complete definition, and several have links to other pages that further explain the term. Enjoy. Woodworking Glossary A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | #'s | A | A-Frame This is a common and strong building and construction shape where you place two side pieces in the orientation of the legs of a letter "A" shape, and then cross brace the middle. This is useful on project ends, and bases where strength is needed. Abrasive Abrasive is a term use to describe sandpaper typically. This is a material that grinds or abrades material, most commonly wood, to change the surface texture. Using Abrasive papers means using sandpaper in most cases, and you can use it on wood, or on a finish in between coats or for leveling. Absolute Humidity The absolute humidity of the air is a measurement of the amount of water that is in the air. This is without regard to the temperature, and is a measure of how much water vapor is being held in the surrounding air. Acetone Acetone is a solvent that you can use to clean parts, or remove grease. Acetone is useful for removing and cutting grease on a wooden bench top that has become contaminated with oil. Across the Grain When looking at the grain of a piece of wood, if you were to scratch the piece perpendicular to the direction of the grain, this would be an across the grain scratch.
    [Show full text]
  • Wood Dust Collection System Design and Inspection
    WorkSafe Bulletin Wood dust collection system design and inspection The hazards of wood dust Wood dust emitted from sawing, planing, sanding, and other operations can cause a variety of health effects when inhaled. Depending on the type of wood used, the effects can range from allergies to nasal cancer. Wood dust is also flammable and combustible. Fine dust accumulations may explode if an ignition source (e.g., open flame, friction, or sparks) is present. A dust collection system can reduce the risks A properly designed wood dust collection system will reduce worker exposure and help prevent accumulations of dust around operating equipment. A typical system Dust collection system for a table saw consists of a capture hood, a fan, ducting, and a filter. Dust collection systems can be purchased or designed and constructed for a particular operation or piece of equipment. Equipment suppliers can provide some guidance. However, a professional mechanical engineer (P.Eng.) who specializes in dust control systems can ensure that a system is properly designed for a particular operation to maximize efficiency and safety. Ensuring a collection system works well The following recommendations can help ensure that a wood dust collection system works efficiently: • Place the collection hood as close as possible to the point of dust generation. • Ensure that the hood encloses the dust-producing operation as much as possible and does not interfere with the process. • Position the collection hood to take advantage of any Avoid sharp bends or connections in ducting inertia the dust might have (e.g., on the bottom of a saw blade designed to cut on the downstroke).
    [Show full text]
  • Combustible Dust in Wood Products Manufacturing a Shop-Floor Guide for Employers and Supervisors About Worksafebc
    Combustible dust in wood products manufacturing A shop-floor guide for employers and supervisors About WorkSafeBC WorkSafeBC (the Workers’ Compensation Board) is an independent provincial statutory agency governed by a Board of Directors. It is funded by insurance premiums paid by registered employers and by investment returns. In administering the Workers Compensation Act, WorkSafeBC remains separate and distinct from government; however, it is accountable to the public through government in its role of protecting and maintaining the overall well-being of the workers’ compensation system. WorkSafeBC was born out of a compromise between B.C.’s workers and employers in 1917 where workers gave up the right to sue their employers or fellow workers for injuries on the job in return for a no-fault insurance program fully paid for by employers. WorkSafeBC is committed to a safe and healthy workplace, and to providing return- to-work rehabilitation and legislated compensation benefits to workers injured as a result of their employment. About this publication This document does not replace the Occupational Health and Safety Regulation or the Workers Compensation Act. This document is not intended to explain the many health and safety requirements that apply to industry. Employers and supervisors should always refer to the Act, the Regulation, and applicable guidelines for specific requirements that apply to their work operations and activities. WorkSafeBC Prevention Information Line The WorkSafeBC Prevention Information Line can answer your questions about workplace health and safety, worker and employer responsibilities, and reporting a workplace accident or incident. The Prevention Information Line accepts anonymous calls. Phone 604 276-3100 in the Lower Mainland, or call 1 888 621-7233 (621-SAFE) toll-free in Canada.
    [Show full text]
  • Hardietrim® Boards
    HardieTrim® Boards EFFECTIVE SEPTEMBER 2019 These instructions are to be used for HardieTrim® HZ™ Boards ONLY and are ONLY VALID in the following states: WA, OR, CA, NV, UT, ID, CO, WY, MT, AZ, NM. IMPORTANT: FAILURE TO FOLLOW JAMES HARDIE WRITTEN INSTALLATION INSTRUCTIONS AND COMPLY WITH APPLICABLE BUILDING CODES MAY VIOLATE LOCAL LAWS, AFFECT BUILDING ENVELOPE PERFORMANCE AND MAY AFFECT WARRANTY COVERAGE. FAILURE TO COMPLY WITH ALL HEALTH AND SAFETY REGULATIONS WHEN CUTTING AND INSTALLING THIS PRODUCT MAY RESULT IN PERSONAL INJURY. BEFORE INSTALLATION, CONFIRM YOU ARE USING THE CORRECT HARDIEZONE® PRODUCT INSTRUCTIONS BY VISITING HARDIEZONE.COM OR CALL 1-866-942-7343 (866-9-HARDIE) CUTTING INSTRUCTIONS STORAGE & HANDLING: OUTDOORS INDOORS 1. Position cutting station so that airflow blows dust away from the DO NOT grind or cut with a power saw indoors. Cut using shears (manual, pneumatic or Store flat and keep dry and covered prior to user and others near the cutting area. electric) or the score and snap method, not recommended for products thicker than 7/16 in. installation. Installing siding wet or saturated may 2. Cut using one of the following methods: a. Best: Circular saw equipped with a HardieBlade® saw blade result in shrinkage at butt joints. Carry planks on and attached vacuum dust collection system. Shears - DO NOT dry sweep dust; use wet dust suppression or vacuum to collect dust. edge. Protect edges and corners from breakage. (manual, pneumatic or electric) may also be used, not - For maximum dust reduction, James Hardie recommends using the “Best” cutting James Hardie is not responsible for damage caused recommended for products thicker than 7/16 in.
    [Show full text]
  • Model 4430 Owner’S Manual for Models Manufactured Since 04/2019
    Planer Model 4430 Owner’s Manual For Models Manufactured Since 04/2019 175370 Oliver Machinery 1-800-559-5065 6902 S 194th St, Kent, WA 98032 Stock Number: 4430.201 [email protected] WWW.OLIVERMACHINERY.NET Manual Version: 1.0.2 READ AND UNDERSTAND ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO ASSEMBLE OR OPERATE THE MACHINE. FOLLOW THE INSTUCTIONS AND THINK SAFETY! THE OWNER OF THIS MACHINE IS SOLELY RESPONSIBLE FOR THE SAFETY OF ANYONE USING THIS MACHINE. SUCH RESPONSIBILITY INCLUDES BUT NOT LIMITED TO: • PROPER ASSEMBLY, OPERATION, INSPECTION, MAINTENANCE, AND RELOCATION OF THE MACHINE. • PROPER TRAINING FOR THE OPERATORS AND ENSURES THIS MANUAL IS AVAILABLE AT ALL TIMES. • USAGE AUTHORIZATION. • USAGE OF SAFETY AND PROTECTION DEVICE. OLIVER MACHINERY DISCLAIMS ANY LIABILITY FOR MACHINES THAT HAVE BEEN ALTERED OR ABUSED. OLIVER MACHINERY RESERVES THE RIGHT TO EFFECT AT ANY TIME, WITHOUT PRIOR NOTICE, THOSE ALTERATIONS TO PARTS, FITTINGS, AND ACCESSORY EQUIPMENT WHICH THEY MAY DEEM NECESSARY FOR ANY REASON WHATSOEVER. ** SAVE THIS MANUAL FOR FUTURE REFERENCES. ** PROP 65 NOTICE WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, and/or other chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement and other masonry products. • Arsenic and chromium from chemically-treated lumber. Avoid inhaling wood dust and other harmful chemicals.
    [Show full text]
  • BWXT Nuclear Energy Canada Inc. Environmental Risk Assessment
    BWXT Nuclear Energy Canada Inc. Environmental Risk Assessment Report Nuclear Fuel Pellet Operation December 2018 Environmental Risk Assessment Report INTENTIONALLY LEFT BLANK arcadis.com Environmental Risk Assessment Report ENVIRONMENTAL RISK ASSESSMENT REPORT Nuclear Fuel Pellet Operation Prepared for: BWXT Nuclear Energy Canada Inc. 1025 Lansdowne Avenue Toronto, Ontario, M6H 3Z6 Prepared by: Arcadis Canada Inc. Laura Guerra Reyes, M.Eng. 121 Granton Drive, Suite 12 Junior Environmental Specialist Richmond Hill, ON L4B 3N4 Tel 905.764.9380 Fax 905.764.9386 Our Ref.: 351384-000 John Peters, M.Eng., P.Eng. Vice President Date: December 2018 This document is intended only for the use of the individual or entity for which it was prepared and may contain information that is privileged, confidential and exempt from disclosure under applicable law. Any dissemination, distribution or Doug Chambers, Ph.D. copying of this document is strictly prohibited. Vice President; Senior Scientist Risk and Radioactivity; Director Technical Knowledge & Innovation-Radiation Services arcadis.com Environmental Risk Assessment Report INTENTIONALLY LEFT BLANK arcadis.com Environmental Risk Assessment Report EXECUTIVE SUMMARY The BWXT Nuclear Energy Canada Inc. (BWXT NEC) Nuclear Fuel Pellet Operation (NFPO) in Toronto processes ceramic grade uranium dioxide (UO2) powder to industry-grade natural uranium fuel pellets for use primarily in CANDU (Canadian Deuterium Uranium) reactor fuel bundles with a smaller quantity of pellets shipped to a plant in Wilmington North Carolina for use in Boiling Water Reactors (BWR). This current ecological risk assessment is being completed to update previous work to fully conform with N288.6- 12 requirements, reflect current plant operations and to incorporate recent monitoring data into the risk assessment process.
    [Show full text]