KAMPALA INTERNATIONAL UNIVERSITY, UGANDA DIRECTORATE OF RESEARCH, INNOVATION, CONSULTANCY AND EXTENSION (DRICE) Prof. C. J. Diji. PhD; MNSE, MNES, M.ARSCP R. Eng (COREN) Personal: (Mobile) +256752364067; Email: [email protected] ; [email protected] [email protected] ; [email protected]; [email protected]

1. PERSONAL INFORMATION

NAME: Chukwuemeka Jude, DIJI DATE OF BIRTH: 2nd December, 1966 PLACE OF BIRTH: Onicha – Ugbo LGA/STATE OF ORIGIN: Aniocha – North/Delta State NATIONALITY: Nigerian MARITAL STATUS: Married

2. EMPLOYMENT HISTORY Position Period Associate Professor and Deputy Vice Chancellor – January 2021 - Date Research, Innovation, Consultancy and Extension (DVC – RICE) and Acting Deputy Vice Chancellor – Academic Affairs , Kampala International University, Uganda Associate Professor and Deputy Vice Chancellor – September 2019 – January, Research, Innovation, Consultancy and Extension (DVC – 2021 RICE) Kampala International University, Uganda Senior Lecturer, October 2013 – August, 2019 Lecturer I,University of Ibadan, Jan 2008 – Sept. 2013 Lecturer II, University of Ibadan, Nigeria Jan. 1998 – Dec. 2007 Production Manager, Tolaram Clay Bricks (Nig) Ltd Sept., 1997 – Dec 1997 Ikorodu – , Nigeria Production Manager, Beta Industries Ltd, Ibadan Jan, 1994 – Oct, 1996 (Member of the Leventis Group) Production Engineer, Vehicle Manufacturing Plant (VMP), Jan, 1990 – Dec. 1993 Moniya – Ibadan(Member of the Leventis Group) Project Engineer, Leventis Motors, Ibadan Sept. 1988 – Dec. 1989 (Member of the Leventis Group) Mechanical Engineer, SOAG Drilling Company, Oct. 1987 – Aug. 1988 Ile – Ife, Osun State (National Youth Service Corp)

1 | P a g e

3. ACADEMIC AND PROFESSIONAL QUALIFICATION a. Education (i) University of Ibadan, Ibadan (2001 – 2007) (ii) University of Ibadan, Ibadan (1994 – 1997) (iii) Obafemi Awolowo University, IIe – Ife (Formerly University of Ife) (1982 – 1987) (iv) Eghosa Anglican Grammar School Benin – City, Edo State (1977 – 1982)

b. Academic Qualification School certificate/General Certificate In Education (SC/GCE) June, 1982 B.Sc. Mechanical Engineering (Obafemi Awolowo University, IIe – Ife) August, 1987

M.Sc. Mechanical Engineering (University of Ibadan, Ibadan) June, 1997

Ph.D. Mechanical Engineering (University of Ibadan, Ibadan) January, 2008

c. Professional Qualification (i) Council for the Regulation of Engineering in Nigeria (COREN) Registered Engineer (Registration No: 18083) (ii) Professional postgraduate qualifying Diploma in Management Consultancy practice and Organizational Transformation of the International Professional Managers Association (IPMA – UK) – Certificate No: PEPQP 15193. (iii) Certified International Professional Manager (CIPM) of the International Professional Managers Association (IPMA – UK) – License No: 0096781693. (iv) Recipient of African Climate Leadership Certification by Strathmore University Business School, Nairobi , Kenya – ACLP – 2020/007 (v) Certification and Completion of Training in Scientific Writing and Communication by AfriCLP from February – March, 2021. AfriCLP is an initiative of IDRC, Canada and implemented by the University of Nairobi, Kenya and the University of Dar – es – salaam, Tanzania 4. SCHOLARSHIP, FELLOWSHIP AND PRIZES (i) University of Ibadan postgraduate school award for the best Outstanding PhD thesis for the 2007/2008 academic session. (ii) Recipient of University of Ibadan conference grant for attendance at the 4th International Exergy, Energy, and Environmental Symposium at AUS, Sharjah, UAE, 19th – 23rd April, 2009

2 | P a g e

(iii) Recipient of John D. and Catherine T. MacArthur Foundation award for specialized academic linkage to conduct research in Optimization of Solar energy Use in building services at the Centre of Study in Renewable and Sustainable Energy (CSRSE) at the University of Botswana, Botswana, January – March, 2010. (iv) Institutional representative for the Windsor Group’s Africa Pilot Project for Energy and Sustainability. The Windsor Group Africa Project is a human capital development initiative among African Universities through collaboration with the Universities of Edinburgh, Virginia and Virginia Tech; Jan – June, 2010. (v) Recipient of MacArthur Foundation Grant for Staff training and Research Capacity development to pursue research in the area of Electricity Production from Biomass at Southern Illinois University Edwardsville (SIUE), USA, March – May, 2011. (vi) Recipient of University of Ibadan conference grant for attendance at the 7th International conference on Heat transfer, Fluid Mechanics and Thermodynamics (HEFAT 2010) at Antalya, Turkey; 19th – 21st July 2010. (vii) Recipient of the World Bank, Science and Technology Education Post Basic(STEP – B) research and development grant for the development of a biomass – based animal incinerator (Cr 4304 – UNI), June 2012. (viii) Recipient of University of Ibadan Senate research grant for the construction of Biomass Gratifiers for the production of producer gas for electricity and other rural energy applications (SRG/FT/2010/12A) October, 2012. (ix) Host Institution Supervisor, for Circle Visiting Fellows participating in the Climate Impact Research Capacity and Leadership Enhancement (CIRCLE) project in Sub – Saharan Africa. CIRCLE is an initiative of the Department for international Development (DFID) of the United Kingdom (UK) and is being implemented by the African academy of Science (AAS) and the Association of Commonwealth Universities (ACU).The programme will run from 2014 – 2018. (x) External reviewer for a mentored research programme of the Building Research and Innovation in Nigeria Science (BRAINS) an initiative of the United State government and the College of Medicine, , Nigeria; 2015 – 2020. (xi) Recipient of the Africa climate Change leadership Program (AfriCLP) Research Fellowship (2017 – 2020).The programme is supported by the international Development Research Centre (IDRC) of the government of Canada, the University of Nairobi, Kenya and the African Climate Change Fellowship program of the University of Dar – es – Salam, Tanzania. (xii) Member of the Technical Advisory Board (TAB) of the University of Ibadan that Developed the Harmonized Research Compliance and Integrity Document for the University of Ibadan. The project was sponsored by the UASP fellowship of the International Research and Exchange Board (IREX) Washington, DC and sponsored by Carnegie Corporation of New York, January 4th – 6th, 2018. (xiii) Expert Reviewer for the Climate Research for Development (CR4D) research grant applications to strengthen link between climate science research and climate information needs to support development in Africa. The programme is an initiative of the African Academy of Science (AAS), the UK Department of International Development (DFID), Weather and Climate Information SERvices for Africa (WISER) and the African Climate

3 | P a g e

policy Centre (ACPC) of the United Nations Economic Commission for Africa (UNECA), March 2019. (xiv) Nominated Expert on the roaster of experts of the United Nations Framework Convention on climate change (UNFCCC), May, 2019 (xv) Co – Principal Investigator, “NEST 360 – Scaling up a Neonatal Intervention Package” (2019 – 2022). The research involves scientific inquiry related to Newborn Essential Solution and Technology (NEST) to reduce newborn mortality in Malawi, Kenya, Tanzania and Nigeria. The project is funded by the MacArthur Foundation, the Bill & Melinda Gate Foundation, ELMA Philanthropies and the Children Investment Fund. The research is led by the William Marsh Rice University, Houston, TX, USA under the sponsored research agreement no. RO304. (xvi) External assessor for promotion of academic staff of the Yaba college of Technology to the position of Senior Lecturer, June, 2019. (xvii) Session Chair (Numerical Simulation 3) 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2019) Wicklow, Ireland, 24th July, 2019 (xviii) Member of Technical Program Committee of the 14th International conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2019) Wicklow, Ireland, 22 – 24th July, 2019. (xix) Expert Reviewer for the Selection of African Academy of Science Affiliates 2020 – 2025), on behalf of the African Academy of Sciences, November, 2020 (xx) Co – Principal Investigator for the “Severe Malaria Patient Journey”. The Project is sponsored by Medicine for Malaria Ventures (MMV) ICC Building CH – 1215 Geneva 15, Switzerland. January – March, 2021 (xxi) Recipient of CIRCLE ISP Implementation Fund 2021, for the development of a Research Development Framework for Kampala International University, April 2021. CIRCLE ISP is an initiative of the Association of Commonwealth University (ACU), UK. CIRCLE – Circle Impact Research Capacity Leadership Enhancement; ISP – Institutional Strengthening Programme.

5 MEMBERSHIP OF LEARNED AND PROFESSIONAL SOCIETIES a. Membership of Learned Societies . Corporate Member, Nigerian Society of Engineers . Member, Nigerian Economic Society . Member, African Roundtable on Sustainable consumption and Production . Member, Solar Energy Society of Nigeria . Member, National/International Association of Energy Economics . Senior Member, International Professional Managers Association, UK b. Membership of Professional Societies . Member, Editorial Board, International Institute for Policy Review and Development Strategies. . Chairman and Research Fellow, African Research Council on Sustainable Development. . Professional Research Council member of the International Institute for Policy Review and development Strategies.

4 | P a g e

. Secretary, Nigerian chapter of the African Roundtable on Sustainable consumption and Production. . Registered Trustee and Secretary, Greener Environmental and Material Sustainability Initiative (GEMS), (CAC/IT/NO. 65632). . Member, West Africa Research and Innovation Management Association (WARIMA ID: WRM/10/ID/0039) . Chief Editor, Journal of Applied Science, Information and Computing (JASIC), Kampala International University . Member, Responsible Research and innovation Group (RRING) Community Network, Ireland. 6. Graduate Supervision Graduated: M.Sc Candidates 1. Okiwelu, A. M.sc Mechanical Engineering (2008) Life – Cycle Analysis of the Production and Energy Transactions of a Manufacturing Industry in Ibadan 2. Adedoyin, A. M.sc Mechanical Engineering (2008) Investigating the Potential Usage of Oil Palm product as Biodiesel 3. Ekpo, D.D M.sc Mechanical Engineering (2009) Environmental Degradation and Urban refuse disposal in selected markets in Uyo town, Akwa Ibom State. 4. Odunjo, K.M M.sc Mechanical Engineering (2009) Environmental risk assessment of cement manufacturing plants in Nigeria (A case study of Ewekoro cement plant) 5. Olalekan, O. M.sc Mechanical Engineering (2009) Energy Efficiency of power plants used as alternative energy sources to public utilities. 6. Yoade O. M.sc Mechanical Engineering (2009) Environmental hazards in the water supply system in Ibadan metropolis. 7. Adadu, C.A M.sc Mechanical Engineering (2009) Design and Construction of a small scale defecation plant. 8. Adekomaya, A M.sc Mechanical Engineering (2009) Design and construction of a biomass – fired poultry incinerator 9. Gordon, H. M.sc Mechanical Engineering (2010) Energy and Exergy Analysis of Thermal Power Plant on advanced steam parameters (case study of the Sapele Power Plant). 10. Onwuka, O. M.sc Mechanical Engineering (2010) Estimation of Energy Heat Balance of a Building: Case Study of the Central administrative department of the University of Ibadan, Ibadan. 11. Folorunsho, A M.sc Mechanical Engineering (2011) Energy and Exergy analysis of a cement manufacturing plant. 12. Akinosun, M.sc Mechanical Engineering (2011) Production of Biofuels from Biomass. 13. Olorunfemi, O. M.sc Mechanical Engineering (2011) Energy Analysis of a biogas system. 14. Alabi, S.O M.Sc Energy Management & Technology (2012), “Energy Efficiency and Management assessment of a Food processing industry (A case study of Fan Milk PLC, Nigeria)”. Department of Mechanical Engineering, University of Ibadan 15. Olabisi, B. M.Sc Energy Management & Technology (2012) “Investigative Analysis of Electric Power Demand and Supply in Nigeria (A case study of Ibadan Distribution Company)”. Department of Mechanical Engineering, University of Ibadan

5 | P a g e

16. Abiodun, F. M.Sc Energy Management & Technology (2012) “Challenges of Electricity Planning and Management of a Distribution System: (A case study of Ojoo Business unit)”. Department of Mechanical Engineering, University of Ibadan 17. Hassan, G M.Sc Energy Management & Technology (2012) “Feasibility Study of a small hydro Electric Power Plant in Nigeria : A case Study of Asa Dam, Ilorin, Kwara State)” Department of Mechanical Engineering, University of Ibadan 18. Elusakin, J.E M.sc Energy Management & Technology (2012) “Nigerian Content Act and its Impact on the Petroleum Industry in Nigeria”. Department of Mechanical Engineering, University of Ibadan 19. Jegede, S. M.sc Mechanical Engineering (2012) Building heat balances estimation: Case study of the ETF building, Faculty of Technology, University of Ibadan, Ibadan. 20. Adeyi, T. M.sc Mechanical Engineering (2012) Investigation of optimal drying medium for selected agricultural crops. 21. Oladumoye, O M.sc Mechanical Engineering (2012) Design of a 250MW coal – fired power plant for the Nigerian Power industry. 22. Akinnibosun, E M.sc Mechanical Engineering (2012) Investigative Analysis of Possibility of Heat as a Cause of Rail derailment in the Nigerian Rail System. 23. Adeniyi, J.A M.sc Development Practice (2012) Technical and Vocational Education and Training (TVET) and Youth Unemployment in Nigeria; Centre for Sustainable development (CESDEV), University of Ibadan. 24. Ayeni, B M.sc Energy Management and Technology (2014) “comparative energy Analysis of some outlets of a major Quick service Restaurant (QSR) in Ibadan”. Department of Mechanical Engineering, University of Ibadan 25. Williams, O. M.sc Mechanical Engineering (2014) Computer Based Electricity Requirement Planning model for the University of Ibadan, Ibadan. 26. Titiloye, I.S M.Sc Mechanical Engineering (2014) Exergoeconomic Analysis of a power plant. 27. Ale, M.O, M.Sc Development Practice (2014) Sustainable biofuel production in Nigeria: options, challenges and opportunities; Centre for Sustainable Development (CESDEV), University of Ibadan, Nigeria 28. Oluokun, O.A, M.Sc Energy Management and Technology (2014) “Energy Management/audit of an oil and Gas supply base Facility”. Department of Mechanical Engineering, University of Ibadan 29. Ayinla, A.I, M.Sc Energy Studies (2014) Environmental Assessment of Bio refinery Supply Chain; Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 30. Soyoye, O.I, M.Sc Energy Studies (2014) An Assessment of Waste to Energy Deployment in South – West Nigeria; Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 31. Popoola, T.O, M.sc Mechanical Engineering (2015) Design, Construction and Performance Evaluation of Downdraft Biomass Gasifier for Thermal Applications. Department of Mechanical Engineering, University of Ibadan, Nigeria. 32. Samuel, O.A, M.sc Energy Studies (2015) Impact of Energy on Cement Industry in Nigeria and its implications on the Environment: A case study of Dangote Cement Plants. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria

6 | P a g e

33. Kuteyi, B.J, M.sc Energy Studies (2015) Comparative Energy Analysis of a Medical Facility in Nigeria: A case study of Muslim Medical Foundation (MMF), Saki,Oyo state. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria 34. Bello, M.A; M.sc Mechanical Engineering (2016) Modelling heat transfer processes during quenching of steel use of COMSOL Multiphysics. 35. Agboiyi, M.O; M.Sc Energy Management and Technology (2016) Performance analysis of an electricity power distribution unit (Case study of Ojoo business unit) Department of Mechanical Engineering, University of Ibadan 36. Oladipo, F.H; M.Sc Energy Management and Technology (2016) Educational Audit of a major educational institution in Nigeria (Case study of Impact business school) Department of Mechanical Engineering, University of Ibadan 37. Ana, R.R; M.sc Energy Management and Technology (2016) Analysis of energy sources, consumption pattern and management systems of the University College Hospital (UCH), Ibadan. Department of Mechanical Engineering, University of Ibadan 38. Omoloso, I; M.sc Energy Management and Technology (2016) Improving equipment maintenance strategy in Nigeria Petrochemical Industries. Department of Mechanical Engineering, University of Ibadan 39. Olaifa, G.A; M.sc Energy Management and Technology (2016) Maximum loading in a major Electricity Distribution System in Nigeria (case study of Dugbe Business District). Department of Mechanical Engineering, University of Ibadan 40. Adeleke, A.A; M.Sc Energy Studies (2016) Sustainability of Solar Mini – grids in Nigeria. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 41. Ajayi, O.C; M.Sc Energy Studies (2016) Thermal Characterization and Modelling of Various Biomass Materials. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 42. Akhigbe, E.C; M.Sc Energy Studies (2016) Harnessing Small Hydropower Potentials for Electricity Generation in Nigeria: Case study of Asejire Dam in Ibadan, Oyo State, Nigeria. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 43. Oye, M; M.Sc Energy Studies (2016) Economic and Technical Assessment of a Rural Renewable – Energy Based Electricity Supply System. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 44. Salako, G.I; M.Sc Entrepreneurship Education (2016) Youth Empowerment in Ogun State:: An Analysis of Various Government Programmes and Activities. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria. 45. Ogunmola, O.A; M.Sc Entrepreneurship Education (2016) Business Failure in Nigeria: Causes and Possible Solutions (Case study of Family Motors, Ibadan). Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria. 46. Olubode, A.S; M.Sc Energy Management and Technology (2017) PV/Diesel Hybrid Power System, An Alternative Source of Electrification (A case study of Oladehinde Housing Estate, Kolapo Ishola, Ibadan). Department of Mechanical Engineering, University of Ibadan. 47. Odom, J.I; M.Sc Energy Management and Technology (2017) Benefits and Cost Analysis of Solar Water Pumping System in Nigeria (A case study of Ondo Statet). Department of Mechanical Engineering, University of Ibadan 48. Chukwuma, K.O; M.sc Energy Management and Technology (2017) Analysis of Electricity Supply in Nigeria (A Case study of Ibadan Electricity Distribution Company). Department of Mechanical Engineering, University of Ibadan

7 | P a g e

49. Gureje, O.O; M.Sc Energy Management and Technology (2017) Economic Assessment of Solar Thermal Energy Technology in Public Buildings. Department of Mechanical Engineering, University of Ibadan. 50. Eweje, A.O; M.Sc Energy Studies (2017) Economic Evaluation of Natural Gas Pipeline Investment: A case Study of Oyo State Transformation Industrial Park, Lagos/ Ibadan Expressway, Nigeria). Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 51. Sokeye, B.I; M.Sc Energy Studies (2017) The Production of Hydrogen from Natural Gas Using a Thermocatalytic Process. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 52. Akintan, E.O; M.Sc Mechanical Engineering (2017) Economic and Technical Assessment of Small Scale Updraft Gasifier. Department of Mechanical Engineering, University of Ibadan 53. Akande, A.A; M.Sc Mechanical Engineering (2017) Impact of Traffic Congestion on Fuel Consumption and CO2 emission of Selected Passenger Cars in Ibadan. Department of Mechanical Engineering, University of Ibadan. 54. Jegede, R; M.Sc Mechanical Engineering (2017) Performance study of Fin and Tube heat Exchanger with Different Fin Geometry. Department of Mechanical Engineering, University of Ibadan. 55. Adewuyi, F.K; M.Sc Entrepreneurship Education (2017) Evaluating the Challenges Militating against the Growth of Indigenous Entrepreneurs: A case Study of Rite Foods Ltd, Ososa, Ijebu – Ode, Ogun State. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria. 56. Oluwakemi, G.A; M.Sc Entrepreneurship Education (2017) Performance Appraisal of Female Entrepreneurs in Micro and Small Enterprises in Aleshiloye Market in Ibadan. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria. 57. Adeniyi, A.A; M.Sc Entrepreneurship Education (2017) Islamic Finance and Psychometrics in SME Financing: A case study of Ikeja Local Government Area, Lagos State. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria 58. Faboyede, O.P; M.Sc Entrepreneurship Education (2017) a practicum Report on the Production of Cement Bonded Particle Board at Forestry Research Institute of Nigeria, Jericho, Ibadan. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria. 59. Agboola, I.A; M.Sc Entrepreneurship Education (2017) Social Entrepreneurship: A tool for tackling Youth Unemployment in Nigeria: A Case Study of Oluyole Local Government. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria. 60. Oyedeji, O.O.J; M.Sc Energy Management and Technology (2018) Energy Audit of a Major Pap Manufacturing Company. Department of Mechanical Engineering, University of Ibadan. 61. Mbachu, B.T; M.Sc Energy Management and Technology (2018) Energy Accounting Challenges in a Distribution Company: A case study of Amuwo Undertaking, Ikeja Electric Plc. Department of Mechanical Engineering, University of Ibadan. 62. Adekoya, A.S; M.Sc Energy Management and Technology (2018) Electricity Load Demand Forecasting in Nigeria: A Case Study of Ibadan Region, Southwest, Nigeria. Department of Mechanical Engineering, University of Ibadan 63. Anigala, E.C; M.Sc Energy Management and Technology (2018) An Assessment of Aggregate Technical, Commercial and Collection Losses in a Typical Power Distribution Company. Department of Mechanical Engineering, University of Ibadan

8 | P a g e

64. Ekuma, I.A; M.Sc Energy Management and Technology (2018) Techno – Economic Evaluation of Power supply Technologies: A case Study of the Education Advancement Centre (EAC), Ibadan. Department of Mechanical Engineering, University of Ibadan. 65. Olubode, A.O; M.Sc Energy Studies – Energy Economies (2018) Technical and Economic comparison of Gas – to – liquid (GTL) and Liquefied Natural Gas (LNG) system. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 66. Olatunde, Y.O; M.Sc Energy Studies – Renewable Energy (2018) Assessment of Energy Use in Buildings. Case study of CPEEL. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 67. Usman H.I; M.Sc. Energy Studies – Energy and Environment (2018) Sustainable Biodiesel Production within South – west, Nigeria. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 68. Mould, A.E; Energy Studies – Renewable Energy (2018) A Geospatial Analysis of seasonal flow and biodiversity Jebba and Kainji Hydroelectric Power Plants in Nigeria. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 69. Olaosebikan, O.O; M.Sc. Entreprenuership Education (2019) Factors Influencing Accessibility and Utilization of Microcredit among small and Medium Scale agribusiness Owners in Bodija Market. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria. 70. Adeyera, A.O; M.Sc. Energy Management and Technology (2019) Analysis of Building Energy Services Using Transient Simulation. Department of Mechanical Engineering, University of Ibadan. 71. Agboola, D.O; M.Sc. Entreprenuership Education (2019) The roles of E-Marketing on the Performance of Small and Medium Scale Enterprises in Abuja Municipal Area Council, FCT. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria. 72. Gbadegesin, O.O; M.Sc. Entreprenuership Education (2019)Impact of Strategic Management on Organisational Growth: A case Study of Cargo and Logistics LTD. Centre for Entrepreneurship and Innovation (CEI) University of Ibadan, Nigeria.

73. Gbatsoma, L.I; M.Sc Energy Studies – Energy Economics (2019) Comparative Analysis of Solar Energy and Gasoline/Diesel generators in Nigeria: Case Study of Lagos State, Nigeria. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 74. Opedare I.M; M.Sc Energy Studies – Energy Economics (2019) Power Analysis for Off – grid Electrification: A case study of Abdusalam Abubakar Postgraduate Hall of Residence, University of Ibadan, Nigeria. Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Nigeria. 75. Esator, G.O; M.Sc. Entrepreneurship Education (2020) Technological Innovation Strategies as mechanism for Entrepreneurial sustainability of selected firms in Lagos State, Nigeria. 76. Adeojo, T.D M.Sc. Entrepreneurship Education (2020)Impact of Customer Service Star and Employee motivation on fish farming productivity in Nigeria: A survey of SAM farms and Cuisine, Akure – Ondo State.

Completed: Ph.D and Post-Doctoral Studies 1. Kaboh – Bah, A (2015) Potential Impact of Climate Change on Hydro – power generation in Ghana, West Africa. Post – Doctoral Studies, Department of Mechanical Engineering, University of Ibadan, Under the Circle Visiting Fellows of the Climate Impact Research Capacity and Leadership Enhancement (CIRCLE) project in Sub – Saharan Africa 2. Oduro – Asare, J (2016) Economic Viability of Solar PV Systems: The Case for Rural Communities in Ghana. PhD in Energy Economics, Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan.

9 | P a g e

3. Oke, A (2017) Energy and Economic Evaluation analysis of log processing in South – western, Nigeria. Ph.D. in Energy Economics, Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan 4. Ekpo, D.D (2019) Energy Modelling of Municipal solid Waste in Uyo, Nigeria. Ph.D in Mechanical Engineering, Department of Mechanical Engineering, University of Ibadan. 5. Adadu, C.A (2019) Combustion Characteristics of Fuel Pellets from Selected Mill wastes and corncob Particles Using Organic Binders. Ph.D in Mechanical Engineering, Department of Mechanical Engineering, University of Ibadan. 6. Lukman W. (2021) Comparative Analysis of Nigerian Petroleum Fiscal Systems using Royalty and Tax Optimization models to Drive Investments. Ph.D in Energy Studies, Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Ibadan.

GRADUATE STUDENTS UNDER SUPERVISION - PhD 7. Ismaila, Z (2016) Integrating Renewable Energies into the Nigerian Electricity Grid System Ph.D Energy Studies, Centre for Petroleum, Energy Economics and Law (CPEEL), University of Ibadan, Ibadan. 8. Yeboah, K.A (2017) Downscaling General Circulation Models to Predict Climate Change and climate variability impacts on Hydropower in Ghana. PhD Energy and Environmental studies at the University of Energy and Natural Resources, Sunyani, Ghana. 9. Ayorinde, O.P (2016) Socio – Cultural dimensions of Household Energy Choices in Oyo State. 10. Ogunleye, T (2017) Techno – economic and investment potential of concentrated solar power projects in selected cities in Northern Nigeria. 11. Ebenezer, O (2018) Valuation of Technical and Economic costs for the Integration of low Carbon Energy Technologies in Nigerian households.

7. Training, Workshop and Major Seminars attended 1. Attended a workshop on Gender Mainstreaming, organized by the University of Ibadan/John D and Catherine T. MacArthur Foundation Gender Mainstreaming Project from June 16th – 17th, 2010. 2. Attended a workshop on Education Partnership for Africa: Enterprise Education for Employability, organized by the Centre for Enterprise Development Services in conjunction with Oxford Brookes University, UK and the British Council from September 6th – 10th, 2010. 3. Satisfactorily Completed a 2 – day National workshop on “Managing technical & Vocational Education (TVE) Institutions in Nigeria, Organized by the National Centre for Technology Management (NACETEM) from 25th – 27th October, 2010. 4. Successful participated in a workshop on Nigeria Enterprise Educators Network (NEEN) which held at the conference center, University of Ibadan, Ibadan on November 9, 2010. 5. Successfully participated in the Training of Entrepreneurship Educators, which was organized by the Centre for Entrepreneurship & innovation (CEI) of the University of Ibadan from 7th – 9th December, 2010. 6. Attended the ETF – research Methodology Capacity Building Workshop on Engineering and Technology, held at the Federal University of Technology, Owerri, from April 26th – 30th, 2011. 7. Successfully Completed the International Roundtable Workshop on Waste Management for Sustainable Development, organized by the African Roundtable on Sustainable Consumption and

10 | P a g e

Production (ARSCP) – Nigerian Chapter and the Greener Environment Management Support (GEMS) Initiative, held from November 16th – 18th, 2011 at Obafemi Awolowo University IIe – Ife, Nigeria. 8. Successfully participated in the Business Counseling/Training of Trainers Programme, organized by the Small & Medium Enterprises Development agency of Nigeria (SMEDAN) from 12th -18th December, 2011. 9. Attended workshop on Packaging R&D Results and Inventions for the Market, organized by the National Office For Technology Acquisition and Promotion (NOTAP) Federal Ministry of Science and Technology and the Islamic Educational, Scientific and Organization (ISESCO) from 6th – 8th June, 2012. 10. Attended and successfully completed a Service Improvement Planning Workshop organized by the SERVICOM Institute, Abuja from 5th – 8th August, 2013. 11. Attended the 14th BEN – AFRICA conference and Training on Business Ethics, which took place at the Pan – Atlantic University, Lekki from 29th October – 1st November, 2013. 12. Attended the third National Energy Efficiency Summit NEES 2013 jointly organized by the United Nations Development Programme (UNDP), Global Environment Fund (GEF) and Energy Commission of Nigeria (ECN) from the 19th – 21st November, 2013. 13. Successfully attended a one – day biomedical engineering workshop on Economics and Entrepreneurship in Technological innovations organized by the FRAMEWORK Programs for Global health innovation Developing Innovative Interdisciplinary Biomedical Engineering Programs in Africa and Northwestern University, University of Ibadan and University of Cape Town; which held at the Centre for sustainable Development, Bodija, Ibadan on January 28, 2014. 14. Successfully took part in field work organized by the Northwestern University Chicago USA at the National Institute of Health Business Training Programme in Moshi and Dar – es – Salam, Tanzania from the 17th march – 29th March, 2014. 15. Participated and Presented a lead paper with the title “Emerging Technologies: a developing nation perspective”; at the Nigerian Army Institute of Technology and Environmental Studies (NAITES) Engineering week from 1st – 4th June, 2015 at the NAITES School complex, NASME Barracks, Markurdi. 16. Attended and successfully completed the 12th annual summer academy titled ‘Energy and the Environment: Governing Climate Change: A multi – level Approach to Energy System Transformation” from the 19th – 24th July, 2015 in Greifswald and Berlin, Germany. It was organized by the International Institute of Energy, climate change and Mobility (IKEM), Berlin and the University of Greifswald. 17. Attended the Framework Programs for Global Health Innovation; Developing innovative interdisciplinary Biomedical Engineering Programmes in Africa, from the 14th – 18th September, 2015 at the College of Medicine, University of Lagos, Idi – Araba, Lagos, Nigeria. 18. Attended the 2nd National Summit on Entrepreneurship and Innovation, with the theme ‘Entrepreneurship and Value creation” organized by the African Centre for Business Development Strategy and Innovation, from the 30th November – 1st December, 2015 at Sheraton Hotels, Ikeja – Lagos. 19. Attended the Framework Program for Global Health Innovation: Developing Innovative Interdisciplinary Biomedical Engineering Programs in Africa and Northwestern University,

11 | P a g e

University of Ibadan, University of Lagos and University of Cape Town held at UI Centre for Sustainable Development Bodija, August 29th – 31st, 2016. 20. Participated in the Review/ Update of the Auto Mechatronics Curriculum and National Occupations Standards (NOS) of the National Automotive Design and Development Council (NADDC), Federal Ministry of Industry, Trade and Investment 7th – 21st October, 2016 at Keffi, Nasawara State. 21. Participated in the Building Research and Innovation in Nigeria’s Science (BRAINS) mentoring of Junior Faculty at the College of Medicine, University of Lagos and reviewed the Year 02 Mentored Research Applications on the 29th November, 2016 22. Participated and completed International Professional Research Training and Career Development training workshop on “Research reporting and referencing: MENDELEY & STATA” organized by the Directorate of Accounting, Business Management and Entrepreneurial Development (DABE), a research arm of the International Institute for Policy Review and Development Strategies (IIPRDS) in collaboration with the International Directorate for Policy and Research, UK. The training took place at the University of Ibadan, Ibadan, Nigeria, 13th June, 2017. 23. Participated in the Nigerian/ Malawi Biomedical Engineering Curriculum Faculty Exchange Programme on Invitation by the University Polytechnic of Malawi, Blantyre, July 17th – 21st, 2017, Blantyre, Malawi 24. Attended the Framework Program for Global Health Innovation: Developing Innovative Interdisciplinary Biomedical Engineering Programs in Africa and Northwestern University, University of Ibadan, University of Lagos and University of Cape Town held at University of Lagos, Nigeria September 11th – 14th, 2017. 25. Participated as member of the organizing committee for training on Data Management and Commercialization of Research for Early Career Researchers. The two day workshop was organized by the Research Management Office (RMO) of the University of Ibadan and sponsored by the CIRCLE Programme at the University of Ibadan, November 21st – 22nd, 2017. 26. Participated in the Building Research and Innovation in Nigeria’s Science (BRAINS) mentoring of Junior Faculty at the College of Medicine, University of Lagos and reviewed the Year 03 Mentored Research Applications from 30th November – 1st December, 2017. 27. Delivered a lecture to the Nigerian Society of Engineers (Oluyole Branch), Ibadan on “Infrastructure Master Plan: Local Content Opportunities for Nigerian Engineers” on 15th January, 2018. 28. Attended the inception training meeting for the African Climate Leadership Programme jointly organized by the Institute of Resource Assessment, of the University of Dar – es – Salam, Tanzania, the University of Nairobi, Kenya and the International Development Research Centre, Canada. The Inception meeting took place at the Ledger Plaza Beach Hotel, Dar – es – salam; 29th January – 6th February, 2018. 29. Participated and Presented a Lead paper titled “Trends and Challenges in New Technological Options and Innovation of Renewable energy” at the Regional Conference on Renewable Energy Development in Africa, with the theme “Developing Renewable Energy in Africa: The Interplay of Technology, Economics and Law” and was jointly hosted by the Centre for Petroleum, Energy, Economics and Law (CPEEL), University of Ibadan and the African Network for Solar Energy (ANSOLE), Jena Germany, 5th – 6th March, 2018.

12 | P a g e

30. Participated and made a presentation on “climate change and health technologies Innovations in Africa” at the second edition of the African Innovation Summit (AIS) which took place in Kigali, Rwanda from the 6th – 8th June, 2018. 31. Participated in the Building Research and Innovation in Nigeria‟s Science (BRAINS) mentoring of Junior Faculty at the College of Medicine, University of Lagos and reviewed the Year 04 Mentored Research Applications from 1st December, 2018.

32. Facilitator at a two day workshop on “Manuscript writing for early career researchers” organized by Research Management office (RMO) University of Ibadan at the Centre for Sustainable Development (CESDEV), Bodija Ibadan. The Workshop was sponsored by CIRCLE - Climate Impact Research Capacity and Leadership Enhancement project in Sub – Saharan Africa is an initiative of the Department for international Development (DFID) of the United Kingdom (UK) and is being implemented by the African academy of Science (AAS) and the Association of Commonwealth Universities (ACU). January 30th – 31st , 2019. 33. Attended Workshop on Science advice and energy Policy organized by INGSA – International Network for Government Science Advice, with the theme: “Evidence Matters: Opportunities and Challenges for Science Advice in making of household energy policy in Nigeria, which took place at Transcorp Hilton Hotel, Abuja, Nigeria. on February 7th, 2019 34. Attended the training programme on Nigerian Enterprise Research workshop organized by De Montfort University, Leicester, UK in conjunction with the University of Ibadan Centre for Entrepreneurship and Innovation (CEI), at the Centre for Sustainable Development (CESDEV), University of Ibadan, Ibadan on Monday 25th March, 2019 35. Participated in the Building Research and Innovation in Nigeria Science (BRAINS) mentoring of Junior Faculty at the College of Medicine, University of Lagos and reviewed the Year 05 Mentored Research Applications from 4th July, 2019. 36. Participated in the training programme of Research Enhancement for Research Managers, Research Associate Deans and Research coordinators at the Kampala International University, Uganda, 3rd December, 2019. 37. Participated in the training for Effective Leadership at the Kampala International University. The training was organized by the Global Human Salvage Organization; 28th February, 2020 38. Participated in the launch of the Private Sector Platform for SDGs in Uganda at the Serena Hotel. The activity is an initiative of the United Nations office in Uganda, the Ugandan government; the Private Sector forum, Uganda and the CEO summit Uganda. 4th May, 2021

8. RESEARCH a. Area of Specialization (i) Energy Studies, (ii) Thermal - Fluids (iii) Environment studies and climate change, (iv) Entrepreneurship and Small Business Development

13 | P a g e b. Thesis /Dissertation 1. Industrial Application of Solar Energy In Nigeria – in the areas of Food Storage, Electricity Generation and Air – Conditioning, B.Sc Thesis, Department of Mechanical Engineering, University of Ife, IIe – Ife. July, 1987. 2. Alternative Energy Sources for Manufacturing Industry. M.Sc Departmental Seminar presentation in partial fulfillment of the Award of M.Sc of the Department of Mechanical Engineering, University of Ibadan, Ibadan. April, 1995. 3. CAD /CAM Application to Beam Analysis in Evaluation of: Bending Stress, Deflection, Maximum Permissible Load and Beam Cross – Sections. (Masters of Science Project Thesis), May, 1997. 4. Energy – Exergy Analysis and Carbon (IV) oxide emission for the Cement Manufacturing Industry in Nigeria. (Doctor of Philosophy thesis), January, 2008 c. Research in Progress 1. A survey and assessment of bioenergy crops in the south – western part of Nigeria. 2. Development and design of a Coal – fired power plant in Nigeria. 3. Development of Hybrid Electricity Mini and Micro – grid Systems 4. Reforms in the Nigerian Electricity Supply Industry and its Implications for National Economic development 5. Potential Impact of Climate Change on hydropower generation systems in Nigeria, West Africa 6. Impact of climate change on human health and urbanization 7. Gender, Political Leadership and Management of the Covid – 19 pandemic: A Eurocentric and Afrocentric Perspective. 8. Drug Conception, development and Production to combat Covid – 19- emerging issues and challenges. 9. Energy Production and Utilization, climate change and covid 19 pandemic : An Environmental, Economic and Technical perspective

9. PUBLICATIONS a. Chapters in Books/Monographs 1. Diji, C.J (2010) “Science and Technology Research Ethics” in the Book University of Ibadan Ethics Policy , university of Ibadan Ethics Policy Committee (Eds) 2010.

2. Diji, C.J and Bamiro, O.A (2012) A short excursion into the energy Supply mix in Nigeria” in Deneloye, A.O; Oyekunle, L.O and Ogunbayo, A (Eds) Ogunye: Giant Strides in Engineering Education Research and Innovations (A Festschrift in honour of Professor Francis Ogunye), University of Lagos Press. 3. Diji, C.J (2012) “History and Relevant Concepts of Entrepreneurship” in GSP (Eds) Introduction to Entrepreneurial Skills commissioned by the General Studies programme of the University of Ibadan for the teaching of GES 301.

14 | P a g e

4. Bamiro, O.A; Diji, C.J and Abu, R (2012) “Feasibility Study of the E – waste Business in Nigeria”. Document prepared for the setting up of the E- waste Recycling Company (Nig) Ltd, Lagos Nigeria. 5. Diji, C.J (2012) Starting, Developing and Operating a Small Business Enterprise, ISBN 978- 978-49579-7-7, 60pages. 6. Diji, C.J (2013) “Cultural issues in Entrepreneurship” in Soyibo, A (Eds) Building an Entrepreneurship culture in Tertiary Institutions. A book of Reading. Published by University of Ibadan, Centre for Entrepreneurship and Innovation. 7. Diji, C. J (2014)”Sustainable Energy Development in Nigeria: Challenges and Implementation Strategies” in Bassey Anam (Eds) Rethinking Sustainable Development in Africa: Economic Growth, Social Equity, Ecology Balance and Energy. (African Development Charter Series – 1). Publication of the Research Working Group of the African Research Council on Sustainable Development. www.internationalpolicybrief.org ISBN: 978 – 016 – 755 – 2. Pages 320 – 339. 8. Iwayemi, A; Diji, C.J; Awotide, B; Adenikinju, A and Obute, (2014) “Towards Sustainable Universal Electricity Access in Nigeria”. Centre for Petroleum, Energy,Economics and Law (CPEEL) Monograph Series Volume 1, No. 2. 9. Diji, C.J et al (2014) Standards for Writing Research Proposals, Grants and Field Reports. Thinking Multi – Disciplinary research. A publication of the International Institute for Policy Review and Developmental Strategies www.internationalpolicybrief.org ISBN: 978 – 018 – 750 – 1. 10. Diji, C.J (2015) “Constituency Projects in Nigeria: lessons and implications for sustainable community development” in Bassey, A and Antai, A.S (Eds) Infrastructure, Economic Development and Poverty Reduction in Africa (African Development Charter Series – 2). Publication of the Research Working Group of the African Research Council on Sustainable Development. www.internationalpolicybrief.org ISBN: 978 – 085 – 075 – 096. Pages 281 – 299. 11. Diji, C.J (2016) “Performance of the Nigerian Economy and Growth Pattern” in Bassey, A and Antai, A.S (Eds) The Nigerian Economy: Structure, Growth, Diversification and Sustainability (African Development Charter Series – 3). Publication of the Research Working Group of the African Research Council on Sustainable Development. www.internationalpolicybrief.org ISBN 978 – 051 – 276 – 4. Page 93 – 130. 12. Diji, C.J (2016) “Issues and Challenges of Entrepreneurship Research in Nigeria” in Bassey, A and Antai, A.S (Eds) Entrepreneurship Innovation and Management Techniques (African Development Charter Series – 4). Publication of the Research Working Group of the African Research Council on Sustainable Development. www.internationalpolicybrief.org page 33 – 55. 13. Diji, C.J; Ana, G.R.E.E and Babalola, J.O (2016) “Nigeria‟s Energy Mix: Challenges and Prospects of Sustainable Energy Systems Options” in Onianwa, P.C and AdieG.U (eds) Chemical Environmental Pollution: A selection of Reviews and Studies. Page 260 – 273. 14. Diji, C.J and Egunjobi, O.K (2017) “Comparative Energy Audit of a Manufacturing Industry in Lagos, Nigeria” in Iledare, Adenikinju and Iwayemi (eds) Energizing Emerging Economics. The Role of Natural Gas & Renewable Energy. Publications of the Nigerian Association of Energy Economics. ISBN 978-978-53358-0-4. Pp 176 - 193 15. Kaboh – bah, A and Diji, C.J (eds) (2018) Sustainable Hydropower in West Africa: Planning, Operations and Challenges. Academic press publication, Elseivier, 290 pages; ISBN 978 – 0 – 12- 813016 – 2 http//:www.elseiver.com/book – and – journals. 16. Kaboh – bah; Diji, C.J and Yeboh, K.A (2018) “Hydropower Generation in West Africa – The Working solution manual” in Kaboh – bah, A and Diji, C.J (eds) Sustainable Hydropower in West

15 | P a g e

Africa: Planning, Operations and Challenges. Academic press publication, Elseivier, 290 pages; ISBN 978 – 0 – 12- 813016 – 2 http//:www.elseiver.com/book – and – journals. Page 197 – 205. 17. Diji C.J. (2019) Energy Transition Process and Sustainable Development. In: Leal Filho W. (eds) Encyclopedia of Sustainability in Higher Education. Springer, Cham. 18. Diji C.J; Shittu, O; Dakare, O; Idusuyi, N and Isaacs, F (2019) Chapter 6: biomedical Engineering and Entreprenuership in Biomedical Engineering for Africa, cape town: University of Capetown libraries: page 35 – 40 DOI : http://dx.doi.org/10.15641/0-7992-2544-0. 19. Adejumobi, O.A; Diji, C.J; Sridhar, MKC; Coker, A.O; Idusuyi, N; Achi, C.G; Omotosho, T; Omobowale, T.O and Olorunnisola, A.O (2019) Chapter 16: A prototype metabolic cage for rats and mice for biomedical research in Nigeria in Biomedical Engineering for Africa, cape town: University of Capetown libraries: page 139 – 146 DOI : http://dx.doi.org/10.15641/0- 7992-2544-0. b. Article in Referred Conference Proceedings 20. Diji, C.J. (2002). “A Technical and Economic evaluation of the Electricity generation and distribution system in Nigeria” Paper presented at National conference on Energy Research and Development at the Abubakar Tafawa Balewa University (ATBU), Bauchi, 10th – 14th February, pp. 54 – 58. 21. Diji, C.J and Okiwelu, A.A (2002) “Electricity Demand and Consumption in a Manufacturing Industry” Paper presented at National conference on Energy Research and Development at the Abubakar Tafawa Balewa University (ATBU), Bauchi , 10th– 14th February, pp 59 – 64. 22. Diji, C.J. (2004) “Constraints to Industrialization: An Ex – Post Evaluation of the Iron and Steel Industry in Nigeria” Paper presented at the 45th annual conference of the Nigerian Economic Society at the NICON Hilton Hotel, Abuja, 23rd – 26th August, pp 493 - 520 23. Diji, C.J. (2005) “Economic Reforms in Nigeria: An assessment of the Electricity supply Industry in Nigeria” Paper presented at the 46th Annual Conference of the Nigerian Economic Society at Airport Hotel, Ikeja, Lagos 23rd – 25th August, pp 205– 236. 24. Diji, C.J. (2009)“Power sector reforms in Nigeria: The challenges of integrated Energy Resource Planning” Paper presented at the 1st National Engineering conference (NECTHOPOLY) at The Polytechnic, Ibadan, June 9th – 11th, pp 8 – 16 25. Diji, C.J and Fagbenle, R.O (2009) “Energy – Exergy Analysis and Carbon Emission of Nigerian Cement Manufacturing Industry” Paper presented at the 4th International Exergy, Energy and Environment Symposium at the American University of Sharjah, Sharjah, United Arab Emirate (UAE), April 19th – 23rd, pp. 1 – 7. 26. Diji, C.J (2009) “Fuel Substitution options for a cement manufacturing plant in Nigeria” paper accepted for presentation at the International conference and Exhibition on Advances in Energy Research at the Indian Institute of Technology, Bombay, India, December 9th – 11th, pp 427 - 433 27. Diji, C.J (2010) „Energy and Exergy Analysis of Raw Material Preparation in a cement production plant” Paper presented at the 7th international conference on Heat transfer, Fluid Mechanics and thermodynamics (HEFAT 2010) 19th – 21st July, pp. 703 – 708. 28. Elusakin, J.E; Diji, C.J; Ajide. O.O and Adegbola, A.A (2012) “ Nigerian Content Act and its impact on the Petroleum Industry in Nigeria” Paper presented at the Energy Technology and Management Conference, hosted by the Department of Mechanical Engineering of the University of Ibadan, Ibadan, 5th – 7th September. 29. Diji, C.J (2014) “Electricity Infrastructure Maintenance in Nigeria: Options and Challenges” paper presented at the second International conference on sustainable System and the Environment held

16 | P a g e at the American University of Sharjah, United Arab Emirate (UAE) from 12th – 13th February, pp. 284 - 289 30. Diji, C.J and Williams O. (2014) “Electricity Requirement Planning Model: case study of the University of Ibadan”, Paper presented at the International conference of Mechanical engineering, Energy technology and management, University of Ibadan, 3rd – 5th September, pp.781 – 790 31. Diji, C.J; A.O. Folorunso and O.K. Ajayi (2014) “Energy use analysis of a selected Cement Plant in Nigeria” Paper presented at the International conference of Mechanical engineering, Energy technology and management, University of Ibadan, 3rd – 5th September, pp.883 - 890 32. Diji, C.J and B. Ayeni (2014) “Comparative energy Analysis of some outlets of a major Quick Service Restaurant (QSR) in Ibadan, Nigeria” , Paper presented at the International conference of Mechanical engineering, Energy technology and management, University of Ibadan, 3rd – 5th September, pp. 624 - 638 33. Titiloye, I.S; Diji, C.J and Okediji, A.P (2014) “Exergo – economic analysis of a power plant” , Paper presented at the International conference of Mechanical engineering, Energy technology and management, University of Ibadan, 3rd – 5th September, pp.702 - 711 34. Diji, C.J (2015) “The Role of Engineering and Technology in Sustainable National Development” Lead Paper presentation at the second national conference on Engineering and Technology organized by the Faculty of Engineering Osun State Polytechnic, Iree, Osun State 3rd – 5th August, pp. 7 - 22 35. Diji, C.J (2015) “Current trends, Constraints and Prospects of Hydropower Development in Nigeria”. Paper presented at the Hydropower Energy Conference, at the University of Energy and Natural Resources, Sunyani, Ghana., 12th – 14th November, pp. 27 - 36 36. Kabo – bah, A and Diji, C.J (2015) „The Dilemma, Challenges and Prospects of Hydropower Generation in West Africa”. Paper presented at the Hydropower Energy Conference, at the University of Energy and Natural Resources, Sunyani, Ghana., 12th – 14th November, pp 18 – 27 37. Ana, R.R; Diji, C.J and Ana, G.R.E.E (2016) “Analysis of Energy Management Systems of the University College Hospital (UCH), Ibadan. Paper presented at the International Conference of Mechanical Engineering, Energy Technology and Management , Department of Mechanical Engineering, University of Ibadan, Nigeria7th – 9th September; pp 741 - 750 38. Bello, M.A and Diji, C.J (2016) “Computer simulation of Heat Transfer Processes during quenching of Steel probe using COMSOL Multiphysics, Paper presented at the International Conference of Mechanical Engineering, Energy Technology and Management , Department of Mechanical Engineering, University of Ibadan, Nigeria 7th – 9th September; pp 136 - 148 39. Ana, R.R and Diji, C.J (2016) “Comparative review of energy storage systems and its role in renewable integration, Paper presented at the International Conference of Mechanical Engineering, Energy Technology and Management , Department of Mechanical Engineering, University of Ibadan, Nigeria 7th – 9th September; pp 288 – 299. 40. Yeboh, A.F; Kaboh – bah, A.T; Antwi, E.O and Diji, C.J (2017) “Downscaling General Circulation Models to Predict Climate Change and Climate Variability Impacts on Hydropower in Ghana: Concepts and Methodology. Paper presented at the International Conference on Climate Change and Sustainable Development in Africa (ICCCSDA), University of Energy and Natural Resources, Sunyani, Ghana; 25th – 28th, July. 41. Diji, C.J and Zubairu, I (2019) “Techno – Economic Assessment of hybrid Energy combination Options for a Major Educational Institution in Nigeria”. Paper presented at the 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2019) , Wicklow, Ireland; 22 – 24th July.

17 | P a g e

42. Oke, A.O; Diji, C.J and Osayande (2019) “Lean Energy Consideration of a Nigerian Sawmill Facility” African Institute for Science Policy and Innovation Conference (ATSPI – IBC) C. Articles in Local and International Journals 42. Ayika, S.N and Diji, C.J (2011) “The Constraints and Prospects of Small scale business enterprises in Nigeria”, International Journal of Development Studies, Volume 6, N0. 4, pp. 79 - 85 43. Diji, C.J (2012) “An Evaluation of the Nuclear Power Programme in Nigeria” Educational and Science Journal of Policy Review and curriculum development; Vol. 2 No.1. International policy brief series, pp. 124 – 138. 44. Diji, C.J (2012) “The Contributions of Urban Markets to the Environmental degradation of the Ibadan Metropolis” Educational and Science Journal of Policy review and Curriculum development; Vol. 2 No.2. International Policy brief series, pp. 184 - 189 45. Diji, C.J (2012) “Constraints and Prospects of Research Capacity Building for Engineering Undergraduates in Nigerian Universities”. Publications of the international Centre for Mathematics & Computer Sciences, ICMCS: Volume 5, pages 29 – 50. 46. Ekpo, D.D; Diji, C.J and Offiong, A (2012) “Environmental Degradation and Municipal Solid Waste Management in Eket – Nigeria” international Journal of Engineering innovations; Volume 4, Number 3, pp. 164 - 173 47. Diji, C.J (2013) “A Critical Review of the Nigerian Energy Scenario” IOSR Journal of Electrical and Electronics Engineering (IOSR – JEEE) Volume 5, Issue 3 (Mar – Apr.) pp 55 – 67. 48. Diji, C.J (2013). Electricity Production from Biomass in Nigeria: Options, Prospects and Challenges. Advanced Materials Research, Vol. 824, pp. 444 – 450. (Switzerland) 49. Diji, C.J ; Ekpo, D.D and Adadu, C.A (2013) “Design of a Biomass Power Plant for a Major Commercial Cluster in Ibadan, Nigeria” The International Journal of Engineering and Science (IJES) Volume 2 issue 4 pp. 23 – 29. 50. Diji, C.J (2013) “Electricity Production from biomass in Nigeria: Options, Prospects and Challenges” International Journal of Engineering and Applied Sciences (EAAS) ISBN 2305 – 8269, Volume 3, Issue 4. 51. Diji, C.J and Ganiyu, H. (2013) “Energy Auditing of a Typical Residential Building in Ibadan Metropolis” IOSR Journal of Electrical and Electronics Engineering (IOSR – JEEE) e – ISSN : 2278 – 1676, p - ISSN: 2320 – 3331, Volume 6, Issue 5; page 24 – 29. 52. Diji, C.J; Ekpo, D.D and Adadu, C.A.(2013) “Exergoenvironmental Evaluation of a Cement manufacturing Process in Nigeria” International Journal of Engineering Research and Development e – ISSN; 2278 – 067X, p – ISSN; 2278 – 800X, www.ijerd.com . Volume 7, issue 12 (July 2013), pp. 25 – 32. 53. Alabi, S.A and Diji, C.J (2013) “Alternative uses of Biomass for Electricity Production in a local Nigerian community” Education and Science Journal of Policy Review and Curriculum Development. Volume 3, No.3 (August). 54. Diji, C.J (2013) “A sustainability assessment of Electricity Production and Consumption in Nigeria” International Journal in Advance Research in Social Engineering and Development strategies; Volume 1, No. 2 (August). 55. Diji, C.J. (2014) “A critical Assessment of the Nigerian rural Electrification Policy” International Journal of advanced Studies in Engineering and Scientific Inventions; Volume 2, No. 1, January.

18 | P a g e

56. Elusakin, J.E; Ajide,O.O and Diji, C.J (2014) “Challenges of Sustaining off – grid power generation in Nigerian rural communities” African Journal of Engineering Research Volume 2, No.2 pp 51 – 57, July. 57. Diji, C.J and Anam, B (2015) “Renewable Energy Technology for rural Electrification in Nigeria: Current Trends and Emerging Issues” International Journal of Advanced Studies in Engineering and Scientific Inventions (UK), Volume 3, No.1, July, pp 1 – 16. 58. Diji, C.J; Adeniji, J.A and Anam, B (2015) “Technical and Vocational Education and Training (TVET) and the Challenges of Youth Unemployment in Nigeria” International Journal of Entrepreneurial Development, Education and Science Research, published by the International Scientific Research Consortium (UK) Volume 3, No. 2, November pp 287 – 297. 58. Diji, C.J and Popoola, T.O (2015) “Performance Prediction of Gasification of Biomass Briquettes Using Thermodynamic Equilibrium Model” Journal of Energy and Natural Resource Management (JENEM) Fifth Edition, Vol.2 1SSN: 2026 - 6189, Publication of the University of Energy and Natural Resources, Sunnayi, Ghana, pp. 71 – 76. 59. Kabo – bah, A; Diji, C.J; Nokoe, K; Muluigetta, Y; Obeng- ofori, D and Akpoti, K (2016) “ Multi – year rainfall and temperature trends in the Volta River Basin and their potential impact on hydropower generation in Ghana” Publication of Climate , Vol.4 No.49 pp 1 – 17 60. Wahab L and Diji C.J (2017) Comparative Analysis of Nigeria Petroleum Fiscal Systems Using Royalty and Tax Optimization Models to Drive Investments. Oil Gas Res 3: 145. doi: 10.4172/2472-0518.1000145. 61. Diji, C.J (2018) “Assessment of the impact of Hydropower generation System on various downstream communities in Nigeria”. NIWE water Journal, Volume 1 No. 1, pp 69 – 76. 62. A. Folorunsho and Diji, C.J (2019) “Comparison Based on Energy and Exergy Analyses of a selected Cement Manufacturing plant in Nigeria”. IOSR Journal of Mechanical and Civil Engineering (IOSR – JMCE) Volume 16, issue 1, pp 16 – 28. 63. Oke, A.O and Diji, C.J (2019) Energy Analysis of Timber Log processing in Nigerian Sawmill. Paper no: JEMT – 1811 – 1136, Journal of Energy Management and Technology (JEMT) Volume 3, Issue 2, February, pp 9 – 13. 64. A. Folorunso and Diji, C.J (2019) Exergy Analysis of a cement manufacturing plant in Nigeria. IOSR Journal of Mechanical and Civil Engineering (IOSR – JMCE) Volume 16, issue 2, series II pp 1 – 12. 65. Olutosin, A. Ogunleye; Chuks Diji; and Rilwan Adebayo (2020) Selection of System Component and requirements for a hypothetical parabolic trough concentrated solar power plant in Northern Nigeria, International Journal of Applications and Innovation in Engineering and Management (IJAIEM), Volume 9, Issue 4, April. 66. Alabi, S.O and Diji, C.J (2021) “Energy Efficiency and Management Assessment of a food processing industry: A study of a dairy Industry, Nigeria. International Journal of Social Sciences and Economic Research. Volume 06, Issue 01, January 2021. DOI: 10.46609/IJSSER. 2021. V6101.001

19 | P a g e