DOCSLIB.ORG

Chemical Resistance Guide for Thordon Elastomers PDF, 186.75 KB

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Chemical Resistance Guide for Thordon Elastomers PDF, 186.75 KB CHEMICAL RESISTANCE GUIDE FOR THORDON ELASTOMERS XL, SXL, COMPAC, Composite (GM2401), RiverTough, HPSXL, Thorseal Updated: January 19, 2021 Thordon elastomers possess excellent corrosion resistance and are resistant to oil, water and most chemicals. They are not affected by lubricants normally used with sleeve bearings. Thordon elastomers are unaffected by mild acid or caustic baths (pH 5-10) or other chemical environments which would be harmful to metallic bearings. The following list shows a selected group of chemicals and their effect on Thordon elastomers. However, it should be used as a guide only. Results can change depending on concentration, temperature, aeration, velocity of flow, duration of exposure, stability of the fluid, degree of contact, and pressure, etc. For critical applications it is recommended that an immersion test be performed to determine whether or not Thordon elastomers will be safe to use. Significant softening or dimensional changes after twenty- four hours of immersion at application temperatures will indicate that a Thordon elastomer is unsuitable for that application. Special Note: The information set forth herein is furnished free of charge and is based on technical data that Thordon Bearings Inc. believes to be reliable. It is intended for use by persons having technical skills, at their own discretion and risk. The handling precaution information contained herein is given with the understanding that those using it will satisfy themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use are outside our control we make no warranties, expressed or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents. 3225 Mainway Drive, Burlington, Ontario Canada L7M 1A6 Tel: (905) 335-1440 | Fax: (905) 335-4033 [email protected] | www.ThordonBearings.com PHYSICAL PROPERTIES A - Excellent B - Good C - Fair X - Poor (do not use) A Aethylium Chloratus B Ammonium Muriate A Aqua Regia X Absolute Alcohol X Agricultural Lime A Ammonium Nitrate C-X Arachis Oil B Acetaldehyde X Air A Ammonium Persulfate B-X Argenti Nitras A Acetamide X Air - 200°F (90°C) B Ammonium Persulfate – Solution X Aromatic Fuel 50% X Acetic Acid – 5% X Air - 300°F (150°C) C Ammonium Persulfate – 10% X Aromatic Hydrocarbons X Acetic Acid – 10% 1.8 BE X Air - 400°F (200°C) X Ammonium Phosphate B Aromatic Vinegar B Acetic Acid – 20% X Air - 500°F (260°C) X Ammonium Sulfate A-B Arsenic Acid C Acetic Acid – 30% 5.4 BE X Air Gas A Ammonium Sulfide B Arsenic Salts B Acetic Acid – 50% X Alcohol X Ammonium Thiocyanide B Artificial Oil of Bitter Almonds X Acetic Acid – 99.5% Glacial X Alcohol – Absolute X Amorphous White Powder X Artificial Vinegar B Acetic Acid – Dilute 10% X Alcohol – Dehydrated X Amyl Acetate X Askarel X Acetic Acid – Glacial 99.5% X Alcohol – Denatured X Amyl Acetic Ester X Asphalt B Acetic Acid – Hot High Pressure X Alcohol – Ethyl X Amyl Alcohol X ASTM – Ref: Fuel A A Acetic Acid – Anhydride X Alcohol – Grain X Amyl Carbinil X ASTM – Ref: Fuel B B Acetic Aldehyde X Alcohol – Methyl X Amyl Chloride C ASTM – Ref: Fuel C X Acetic Anhydride X Alcohol of Vinegar B Amyl Chloronapthalene X ASTM – Ref: #1 Oil A-B Acetic Ester X Aldehyde X Amyl Hydride X ASTM – Ref: #2 Oil B Acetic Ether X Alicyclic Hydrocarbon B Amyl Napthalene X ASTM – Ref: #3 Oil B Acetic Oxide X Aliphatic Hydrocarbon B Anderol L-774 (Di-Ester) X ASTM – Ref: #4 Oil X Acetidino X Alkazene C Anderol L-826 (Di-Ester) X ATL-857 X Acetocetic Ester X Almond Oil, Artificial X Anderol L-829 (Di-Ester) X Atlantic Dominion F B Acetocetic Ether X Aluminum Acetate X Ang-25 (Glyceral Ester) X Atlantic Ultro Gear – EP Lube A Acetone X Aluminum Bromide C Ang-25 (Di-Ester Base) (TG49) X Alurex 903R – Mobil A Acetone Cyahydrin X Aluminum Chloride B-C Anhydrous Ammonia X Australene B Acetonic X Aluminum Fluoride C Anhydrous Copper Chloride A Automatic Transmission Fluid B Acetophenone X Aluminum Nitrate C Anhydrous Hydrazine X B Acetyl Acetone C Aluminum Salts C Aniline X Banana Oil X Acetyl Acetonic B Aluminum Sodium Sulfate A Aniline, Light C Banks Oil A Acetyl Benzene X Aluminum Sulfate X Aniline Chloride X Bardol “B” X Acetyl Bromide C Aluminum Sulfide B Aniline Dyes X Barium Carbonate B Acetylene C Ambrex 33 – Mobil B Aniline Hydrochloride X Barium Chloride (150°F, 65°C) B Acetyl Choloride X Ambrex 830 – Mobil A Aniline Oils X Barium Hydrate B Acetyl Oxide X Amines, Mixed X Aniline Salts X Barium Hydroxide B Acetylene Tetrabromide X Aminic Acid X Animal Fats B Barium Monosulfide A Acryimid X Amino Benzene X Animal Gelatin C Barium Salts A Active Amyl Alcohol C Amino Ethanol C Animal Glue A Barium Sulfate A Adeps A 2-Amino Ethanol C Animal Grease A Barium Sulfide A Adeps Mineralis A Ammonia Anhydrous (Liquid) X Animal Oils (Lard Oil) B Bayol D X Adipic Acid B Ammonia Gas, Cold A AN-0-3 Grade M A Bayol 35 B Aero Lubriplate A Ammonia and Lithium Metal in Solution X AN-0-6 A Beer X Aerosafe – 2300 X Ammonia Water A AN-0-366 A Beet Sugar X Aerosafe – 2300W X Ammoniak A Anodynon B Beet Sugar Liquors X Aero Shell – IAC A Ammonium Acetate C-X Ansul Ether B Benzalchol X Aero Shell – 7A Grease A Ammonium Carbonate B Ansul Ether 161 or 181 B Benzaldehyde X Aero Shell – 17 Grease A Ammonium Chloride A Ant Oil X Benzene (Benzol) X Aero Shell – 750 X Ammonium Hydroxide A-B Antichlor A Benzene Carbonal X Aerozene 50 (50% Hydrazine 50% UDMH) X Ammonium Hydroxide, Concentrated X Antimony Salts B Benzene Carbonyl Chloride X Aether B Ammonium Hydroxide, 3 Molar X AN-VV-0366B Hydraulic Fluid B Benzene Carboxylic Acid X Chemical Resistance Guide For Thordon Elastomers | 2 PHYSICAL PROPERTIES A - Excellent B - Good C - Fair X - Poor (do not use) Benzene Methylal X Bret 710 C Butraldehyde X Castor Oil A-B Benzene Sulfonic Acid X Brine A Butyronitrite X Caustic Baryta B Benzene Sulfonic Acid – 10% X Bromine C-X C Caustic Lime C Benzidam X Bromine – Gas X Cajeputene X Caustic Potash B Benzin B Bromine Pentafluoride X Calcine Liquors X Caustic Soda B Benzine B-C Bromine Trifluoride X Calcium Acetate X Cellosolve X Benzoic Acid X Bromine Water X Calcium Bisulfate A Cellosolve Acetate X Benzoic Aldehyde X Bromo Benzene X Calcium Bisulfite A Cellosolve Butyl X Benzol (German) X Bromo Chloro Trifluoro Ethane X Calcium Carbonate B-C Celluguard X Benzol Hydride X Bromo Ethylene X Calcium Chloride A-B Cellulube A60 (No Fyrquel) X Benzole (French) X Bronzing Liquid X Calcium Hydrate A-B Cellulube Hydraulic Fluids X Benzoline B Bruceite A Calcium Hydroxide (Caustic Lime) C Cellutherm 2505A X Benzophenone X Bunker Oil B Calcium Hypochloride X Cetane (Hexadecane) X Benzoly Benzene X Butadiene X Calcium Hypochlorite X Cetylic Acid A Benzoyl Chloride X Butadiene (Monomer) X Calcium Nitrate A-B Chelen B Benzoyl Hydride X Butanal (Butal) X Calcium Oxychloride – 15% X China Bean Oil B Benzyl Alcohol X Butane C Calcium Phosphate A China Wood Oil (Tung Oil) C Benzyl Chloride X Butane – 2.2 – Dimethyl X Calcium Salts A Chinese Bean Oil B Biborate of Soda A Butane – 2.3 – Dimethyl X Calcium Sulfate B Chinese Wood Oil C Biphenyl X Butanol (Butyl Alcohol) X Calcium Sufide A Chloracetic Acid X Black Liquor X Butanol – 1 X Calcium Sulfite A Choratus B Black Liquor – Waste X Butanol – 2 X Calcium Thiosulfate A 2 Chlorethanol X Black Point 77 C Butanone X Caliche Liquors A Chlorextol X Black Sulfate Liquor X Butanone – 2 X Candol B Chloride of Lime X Black Fixe, Synthetic A 1 – Butene, 2 – Ethyl X Cane Sugar X Chlorinated Diphenyl X Blast Furnace Gas X Butoxyethanol X Cane Sugar Liquors X Chlorinated Lime 35% X Bleach Solutions X Butoxyethanol - 2 X Caproic Aldehyde X Chlorinated Salt Brine X Bleaching Powder X Butter (Animal Fat) A Caproyl Alcohol X Chlorinated Solvents (Wet or Dry) X Blown Linseed Oil B Butter of Tin B Caproyl Hydride B Chlorine (Dry) X Blue Copperas A Butter of Zinc A Capryl Alcohol X Chlorine (Wet) X Blue Jack A Butyl Acetate X Caprylic Alcohol X Chlorine Dioxide X Blue Salts A Butyl Acetyl Ricinoleate X Carbmate X Chlorine Dioxide, 8% Cl as NaCLO2 in Solution X Blue Stone A Butyl Acid C Carbinol X Chlorine Peroxide X Blue Vitrol A Butyl Alcohol C-X Carbitol X Chlorine Trifluoride X Boghead Naphtha C Butyl Alcohol – Normal C-X Carbolic Acid X Chloro Acetic Acid X Boiled Linseed Oil B Butyl Alcohol – Secondary C-X Carbolic Acid, Phenol X Chloro Acetone X Bone Oil B Butyl Aldehyde X Carbon Bisulfide C x-Chloro Benzaldehyde X Boracic Acid A Butyl Amine X Carbon Dioxide – Wet or Dry A Chloro Benzene X Borax A Butyl Amine of N-Butyl Amine X Carbon Disulfide C Chlorobenzene, Mono X Bodeaux Misture X Butyl Cellosolve X Carbon Monoxide A Chloro Benzol X Boric Acid A-B Butyl Cellosolve Adipate X Carbon Monoxide (Hot) A Chloro Bromo Methane X Boron Fluids (HEF) X Butyl Ether B Carbon Tetrachloride X Chloro Butadiene X Brandol B Butyl Hydrate X Carbonic Acid A 2-Chloro 1.3 – Butadiene X Brandy X Butyl Hydride C N-Carbonic Acid A 1-Chloro 2.3 – Epoxypropane X Bray GG-130 X Butyl Hydroxide X Carbonic Acid Gas A Chlorododecane X Brayco 719-R X Butyl Oxide B Carbonic Anhydride A Chloro Ethane B Brayco 885 A Butyl Tertiary Alcohol X Carboxy Methyl Chloride X Cloro Ethanoic Acid X Brayco 910 C Butylene X Carrene X Chemical Resistance Guide For Thordon Elastomers | 3 PHYSICAL PROPERTIES A - Excellent B - Good C - Fair X - Poor (do not use) Chloro Ethanol X Copper Acetate X Diacetone Alcohol C Dimethyl Carbinol X Chloro Ethyl Alcohol
Load more

Recommended publications
  • Press Release
    Press Release Amsterdam, The Netherlands / 6 November 2020 OCI Selected as Biofuel Supplier for Esso petrol in the United Kingdom OCI N.V. (Euronext: OCI) today announced that it has reached an agreement with Esso Petroleum Company, Limited (Esso), a subsidiary of Exxon Mobil Corporation, to supply a biofuel alcohol mix consisting of bio-methanol and ethanol, which will be blended with Esso’s standard Synergy grade petrol sold in the United Kingdom. The superior performance provided by OCI’s alcohol mix enables its customers to exceed mandated biofuel blending targets set by the UK and the EU without the introduction of a new fuel standard such as E10. OCI’s bio-methanol is an advanced biofuel that reduces greenhouse gas emissions compared to conventional petrol. Bio-methanol has a number of advantages: 1. Unlike ethanol which is primarily derived from food crops such as corn, wheat or sugar, bio-methanol is an advanced, second generation biofuel derived from bio-methane sourced from organic waste put into municipal landfills or anaerobic digesters. As such, in addition to the advantage that the use of bio-methanol results in lower consumption of fossil fuels, it provides an outlet for bio-waste, contributing to the circular economy and reducing methane emissions into the atmosphere. 2. Traditional methanol derived from natural gas has already long been used in auto racing to boost octane and deliver superior engine performance. Bio-methanol delivers the same benefits, while offering greenhouse gas (GHG) savings of more than 60% versus petrol derived from fossil fuels (volume for volume). Ahmed El-Hoshy, Chief Executive Officer of OCI NV, commented: “Through our cooperation with ExxonMobil, we aim to promote the use of bio-methanol as a complimentary biofuel alongside ethanol to reduce the carbon intensity of road transportation fuels.
    [Show full text]
  • Mineral Processing
    Mineral Processing Foundations of theory and practice of minerallurgy 1st English edition JAN DRZYMALA, C. Eng., Ph.D., D.Sc. Member of the Polish Mineral Processing Society Wroclaw University of Technology 2007 Translation: J. Drzymala, A. Swatek Reviewer: A. Luszczkiewicz Published as supplied by the author ©Copyright by Jan Drzymala, Wroclaw 2007 Computer typesetting: Danuta Szyszka Cover design: Danuta Szyszka Cover photo: Sebastian Bożek Oficyna Wydawnicza Politechniki Wrocławskiej Wybrzeze Wyspianskiego 27 50-370 Wroclaw Any part of this publication can be used in any form by any means provided that the usage is acknowledged by the citation: Drzymala, J., Mineral Processing, Foundations of theory and practice of minerallurgy, Oficyna Wydawnicza PWr., 2007, www.ig.pwr.wroc.pl/minproc ISBN 978-83-7493-362-9 Contents Introduction ....................................................................................................................9 Part I Introduction to mineral processing .....................................................................13 1. From the Big Bang to mineral processing................................................................14 1.1. The formation of matter ...................................................................................14 1.2. Elementary particles.........................................................................................16 1.3. Molecules .........................................................................................................18 1.4. Solids................................................................................................................19
    [Show full text]
  • Not for Quotation Without Permission of the Author
    NOT FOR QUOTATION WITHOUT PERMISSION OF THE AUTHOR DECISION CASE STUDY UNITED KINGDOM MOSSMORRAN-BWFOOT BAY Sally M. Macgill July 1982 CP-82- 4 0 Collaborative Papers report work which has not been performed solely at the International Institute for Applied Systems Analysis and which has received only limited review. Views or opinions expressed herein do not necessarily represent those of the Insti- tute, its National Member Organizations, or other organizations supporting the work. INTERNATIONAL INSTITUTE FOR APPLIED SYSTEMS ANALYSIS 2361 Laxenburg, Austria CONTENTS CHAPTER 1 : INTRODUCTION 1.1. Perspective 1.2. Status of Report 1.3. Outline CHAPTER 2 : THE DECISION STRUCTURE 2.1. Context for the Developments 2.2. Site Choice 2.3. The Main Parties to the Decision 2.4. The Main Events in the Decision Process CHAPTER 3: THE DIMENSIONS OF THE DECISION 3.1. Statement of Dimensions 3.2. National Benefits 3.3. Local Socio-Economic Benefits 3.4. Health and Safety Aspects 3.5. Environmental Impacts CHAPTER 4 : PARTY PERSPECTIVES ON VARIOUS DIMENSIONS 4.1. Overview of Conflicts 4.2. The Oil Companies: Shell and Esso 4.2.1. National Benefits 4.2.2. Local Socio-Economic Benefits 4.2.3. Health and Safety 4.2.4. Environment 4.3. The Scottish Development Department 4.4. Departments of Energy and Industry 4.5. The Local Authorities: Fife, Dunfermline and Kirkcaldy 4.5.1. National Benefits 4.5.2. Local Socio-Economic Effects 4.5.3. Health and Safety 4.5.4. Environment 4.6. The Forth Ports Authority 4.7. The Health and Safety Executive 4.8.
    [Show full text]
  • Imperial Standard: Imperial Oil, Exxon, and the Canadian Oil Industry from 1880
    University of Calgary PRISM: University of Calgary's Digital Repository University of Calgary Press University of Calgary Press Open Access Books 2019-04 Imperial Standard: Imperial Oil, Exxon, and the Canadian Oil Industry from 1880 Taylor, Graham D. University of Calgary Press Taylor, G. D. (2019). Imperial Standard: Imperial Oil, Exxon, and the Canadian Oil Industry from 1880. "University of Calgary Press". http://hdl.handle.net/1880/110195 book https://creativecommons.org/licenses/by-nc-nd/4.0 Downloaded from PRISM: https://prism.ucalgary.ca IMPERIAL STANDARD: Imperial Oil, Exxon, and the Canadian Oil Industry from 1880 Graham D. Taylor ISBN 978-1-77385-036-8 THIS BOOK IS AN OPEN ACCESS E-BOOK. It is an electronic version of a book that can be purchased in physical form through any bookseller or on-line retailer, or from our distributors. Please support this open access publication by requesting that your university purchase a print copy of this book, or by purchasing a copy yourself. If you have any questions, please contact us at [email protected] Cover Art: The artwork on the cover of this book is not open access and falls under traditional copyright provisions; it cannot be reproduced in any way without written permission of the artists and their agents. The cover can be displayed as a complete cover image for the purposes of publicizing this work, but the artwork cannot be extracted from the context of the cover of this specific work without breaching the artist’s copyright. COPYRIGHT NOTICE: This open-access work is published under a Creative Commons licence.
    [Show full text]
  • Pvc Piping Systems for Commercial and Industrial Applications
    PVC PIPING SYSTEMS FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS Plastic Pipe and Fittings Association © 2012 Plastic Pipe and Fittings Association (PPFA) Acknowledgments We would like to thank the following contributors to the Design Guide: The PVC and Thermoplastic Industrial Piping Systems (TIPS) Product Line Committees and member companies of the Plastic Pipe and Fittings Association (PPFA). In particular the following PPFA companies and individuals ably assisted in reviewing the text and tables and provided valuable comments which added greatly in producing a better and more accurate source document: Chuck Bush – Oatey Company Mike Cudahy – PPFA Staff Patrick Fedor – IPEX Bill Morris – Charlotte Pipe & Foundry Jack Roach – Mueller Industries Bill Weaver – Harvel Plastics Larry Workman – LASCO Fittings All text, tables and photos were prepared and or edited by David A. Chasis of Chasis Consulting, Inc. Using the Design Guide The Design Guide was created to assist engineers, installers, end-users, engineering students and building code officials in learning more of the dos and don’ts of PVC piping systems. The Design Guide is comprised of ten sections including: Introduction Features and Benefits Engineering Design Joining Methods Installation Testing and Repair Applications Building Codes, Standards, and Sample Specifications PVC Piping and the Environment Other Plastic Piping Systems In addition, in the back of the guide is the most complete appendix and glossary of PVC piping systems ever assembled. Other PPFA Educational Materials The PPFA offers a wide range of other educational materials developed to assist the engineering and construction industry to become more proficient in the use of the preferred piping system...plastics! On-site seminars, Webinars, CD-based seminars, workbooks, online tutorials and product and technical literature are available.
    [Show full text]
  • Corporate Tax Avoidance Submission
    name jurisdiction_dincorporation_date ibcRUC node_id sourceID 1 ESSO (BM-S-EIGHT) BRAZIL EXPLORATION LIMITED Bahamas 19-Jul-06 144579B 20144579 Bahamas Leaks 2 ESSO (BM-S-ELEVEN) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144827B 20144827 Bahamas Leaks 3 ESSO (BM-S-NINE) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144831B 20144831 Bahamas Leaks 4 ESSO (BM-S-TEN) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144830B 20144830 Bahamas Leaks 5 ESSO (BM-S-TWENTY TWO) BRAZIL EXPLORATION LIMITED Bahamas 25-Jan-00 102571B 20102571 Bahamas Leaks 6 ESSO (BM-S-TWENTY-FOUR) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144829B 20144829 Bahamas Leaks 7 ESSO (BM-S-TWENTY-ONE) BRAZIL EXPLORATION LIMITED Bahamas 11-Aug-06 144828B 20144828 Bahamas Leaks 8 ESSO (ROUND NINE) BRAZIL EXPLORATION LIMITED Bahamas 2-Nov-07 151113B 20151113 Bahamas Leaks 9 ESSO ANGOLA (THIRTY) LIMITED Bahamas 1-Sep-99 95609B 20095609 Bahamas Leaks 10 ESSO ANGOLA (TWENTY EIGHT) LIMITED Bahamas 1-Sep-99 95607B 20095607 Bahamas Leaks 11 ESSO ANGOLA (TWENTY NINE) LIMITED Bahamas 1-Sep-99 95608B 20095608 Bahamas Leaks 12 ESSO ANGOLA (TWENTY SEVEN) LIMITED Bahamas 1-Sep-99 95606B 20095606 Bahamas Leaks 13 ESSO ANGOLA (TWENTY SIX) LIMITED Bahamas 1-Sep-99 95610B 20095610 Bahamas Leaks 14 ESSO ANGOLA GAS COMPANY LIMITED Bahamas 16-Jan-01 117958B 20117958 Bahamas Leaks 15 ESSO ANGOLA INVESTMENTS LIMITED Bahamas 20-Aug-01 120962B 20120962 Bahamas Leaks 16 ESSO BOLIVA LIMITED Bahamas 11-Aug-95 35376B 20035376 Bahamas Leaks 17 ESSO BRAZIL INVESTMENTS LIMITED Bahamas 30-Nov-00 116707B 20116707
    [Show full text]
  • STAC-V : Chemical Resistance List Max Temperature
    S TA C Industrial Coatings STAC-V : Chemical Resistance List Max Temperature Chemical Formula Alias Concentration V1 V2 Note Acetaldehyde CH3-CH=O Acetic aldehyde 100 % n.r. n.r. Aldehyde Ethanal Ethyl aldehyde Acetic acid CH3-CO-OH Acetic acid glacial 010 % 90 100 0 Ethanoic acid Ethylic acid Glacial acetic acid Methane carboxylic acid Vinegar acid Vinegar Hac 015 % 90 100 0 025 % 90 100 0 040 % 80 90 050 % 70 80 075 % 60 65 080 % 45 45 085 % 45 45 100 % n.r. 25 Acetic acid : nitric acid : CH3-CO-OH : HNO3 : Cr2O3 Ethylic acid : salpeterzuur : 03:05:03 65 80 chromic oxide chromium oxide Acetic acid : sulfuric acid CH3-CO-OH : H2SO4 Ethylic acid : dihydrogen sulfate 20:10 100 100 Acetic anhydride CH3-CO-O-CO-CH3 Acetyl acetate 100 % n.r. n.r. Acetanhydride Acetic oxide Acetyl ether Acetyl oxide Acetone CH3-CO-CH3 Propanone 005 % 80 80 Propan-2-one Dimethyl ketone β-Ketopropane[ Propanone 2-Propanone Dimethyl formaldehyde Pyroacetic spirit (archaic) 010 % 80 80 100 % n.r. n.r. Acetone : MEK : MiBK CH3-CO-CH3 : CH3-CO-CH2- Acetone : methylethyl ketone : 02:02:02 n.r. 40 CH3 : CH3-CO-CH2-CH2-CH3 methylisobutyl ketone Acetonitrile CH3-CN Cyanomethane all n.r. n.r. Ethanenitrile Ethyl nitrile Methanecarbonitrile Methyl cyanid Acetyl chloride CH3-CO-Cl Acetic chloride 100 % n.r. n.r. Ethanoyl chloride Acetylacetone CH3-CO-CH2-CO-CH3 Pentane-2,4-dione 020 % 40 50 2,4-Pentanedione 2,4-Dioxopentane 2,4-Pentadione acetyl-2-Propanone Acac Acetoacetone Diacetylmethane 100 % n.r.
    [Show full text]
  • Gasket Chemical Services Guide
    Gasket Chemical Services Guide Revision: GSG-100 6490 Rev.(AA) • The information contained herein is general in nature and recommendations are valid only for Victaulic compounds. • Gasket compatibility is dependent upon a number of factors. Suitability for a particular application must be determined by a competent individual familiar with system-specific conditions. • Victaulic offers no warranties, expressed or implied, of a product in any application. Contact your Victaulic sales representative to ensure the best gasket is selected for a particular service. Failure to follow these instructions could cause system failure, resulting in serious personal injury and property damage. Rating Code Key 1 Most Applications 2 Limited Applications 3 Restricted Applications (Nitrile) (EPDM) Grade E (Silicone) GRADE L GRADE T GRADE A GRADE V GRADE O GRADE M (Neoprene) GRADE M2 --- Insufficient Data (White Nitrile) GRADE CHP-2 (Epichlorohydrin) (Fluoroelastomer) (Fluoroelastomer) (Halogenated Butyl) (Hydrogenated Nitrile) Chemical GRADE ST / H Abietic Acid --- --- --- --- --- --- --- --- --- --- Acetaldehyde 2 3 3 3 3 --- --- 2 --- 3 Acetamide 1 1 1 1 2 --- --- 2 --- 3 Acetanilide 1 3 3 3 1 --- --- 2 --- 3 Acetic Acid, 30% 1 2 2 2 1 --- 2 1 2 3 Acetic Acid, 5% 1 2 2 2 1 --- 2 1 1 3 Acetic Acid, Glacial 1 3 3 3 3 --- 3 2 3 3 Acetic Acid, Hot, High Pressure 3 3 3 3 3 --- 3 3 3 3 Acetic Anhydride 2 3 3 3 2 --- 3 3 --- 3 Acetoacetic Acid 1 3 3 3 1 --- --- 2 --- 3 Acetone 1 3 3 3 3 --- 3 3 3 3 Acetone Cyanohydrin 1 3 3 3 1 --- --- 2 --- 3 Acetonitrile 1 3 3 3 1 --- --- --- --- 3 Acetophenetidine 3 2 2 2 3 --- --- --- --- 1 Acetophenone 1 3 3 3 3 --- 3 3 --- 3 Acetotoluidide 3 2 2 2 3 --- --- --- --- 1 Acetyl Acetone 1 3 3 3 3 --- 3 3 --- 3 The data and recommendations presented are based upon the best information available resulting from a combination of Victaulic's field experience, laboratory testing and recommendations supplied by prime producers of basic copolymer materials.
    [Show full text]
  • Whole Foods Market Unacceptable Ingredients for Food (As of March 15, 2019)
    Whole Foods Market Unacceptable Ingredients for Food (as of March 15, 2019) 2,4,5-trihydroxybutyrophenone (THBP) benzoyl peroxide acesulfame-K benzyl alcohol acetoin (synthetic) beta-cyclodextrin acetone peroxides BHA (butylated hydroxyanisole) acetylated esters of mono- and diglycerides BHT (butylated hydroxytoluene) activated charcoal bleached flour advantame bromated flour aluminum ammonium sulfate brominated vegetable oil aluminum potassium sulfate burnt alum aluminum starch octenylsuccinate butylparaben aluminum sulfate caffeine (extended release) ammonium alum calcium benzoate ammonium chloride calcium bromate ammonium saccharin calcium disodium EDTA ammonium sulfate calcium peroxide apricot kernel/extract calcium propionate artificial sweeteners calcium saccharin aspartame calcium sorbate azo dyes calcium stearoyl-2-lactylate azodicarbonamide canthaxanthin bacillus subtilis DE111 caprocaprylobehenin bacteriophage preparation carmine bentonite CBD/cannabidiol benzoates certified colors benzoic acid charcoal powder benzophenone Citrus Red No. 2 Page 1 of 4 cochineal foie gras DATEM gardenia blue diacetyl (synthetic) GMP dimethyl Silicone gold/gold leaf dimethylpolysiloxane heptylparaben dioctyl sodium sulfosuccinate (DSS) hexa-, hepta- and octa-esters of sucrose disodium 5'-ribonucleotides high-fructose corn syrup/HFCS disodium calcium EDTA hjijiki disodium dihydrogen EDTA hydrogenated oils disodium EDTA inosine monophosphate disodium guanylate insect Flour disodium inosinate iron oxide dodecyl gallate kava/kava kava EDTA lactic acid esters of monoglycerides erythrosine lactylated esters of mono- and diglycerides ethoxyquin ma huang ethyl acrylate (synthetic) methyl silicon ethyl vanillin (synthetic) methylparaben ethylene glycol microparticularized whey protein derived fat substitute ethylene oxide monoammonium glutamate eugenyl methyl ether (synthetic) monopotassium glutamate FD&C Blue No. 1 monosodium glutamate FD&C Blue No. 2 myrcene (synthetic) FD&C Colors natamycin (okay in cheese-rind wax) FD&C Green No.
    [Show full text]
  • Exxonmobil Indonesia at a Glance Country Fact Sheet
    ExxonMobil Indonesia at a glance Country fact sheet KEY FACTS 1898 Standard Oil Company of New York (Socony) opens a marketing office in Java. 1968 Mobil Oil Indonesia Inc. (MOI) is formed and becomes one of the first contractors to be involved in the country’s newly established “Production Sharing Contract (PSC)” approach for B block in North Aceh. MOI is later renamed ExxonMobil Oil Indonesia (EMOI) in 2000. 2001 A discovery of over 450 million barrels of oil at Banyu Urip oil field, East Java. 2005 ExxonMobil Cepu Limited (EMCL) assigned as operator for the Cepu block under PSC. 2006 Banyu Urip Plan of Development (POD) approved by the government of Indonesia. 2009 Cepu block commenced commercial production through Early Production Facility (EPF). 2011 EMCL awards five major Banyu Urip project Engineering, Procurement and Construction (EPC) contracts to five Indonesian-led consortiums. 2015 In October, ExxonMobil assigned its interest in the North Sumatra Block Offshore (NSO) and B Block PSC to Pertamina. The start-up of Banyu Urip’s onshore Central Processiong Facility (CPF) commenced in December. 2016 POD production of 165,000 barrels of oil per day is achieved at Banyu Urip field. NOW Approximately 570 employees at ExxonMobil Indonesia. Nearly 90 percent are Indonesians, many of whom are senior managers and engineers. Increasing energy supply for Indonesia. The FSO vessel, Gagak Rimang, connected to the mooring tower. UPSTREAM Cepu block East Natuna block • The Cepu Block PSC was signed on 17 September 2005 • Located in the South China Sea. covering the Cepu Contract Area in Central and East Java.
    [Show full text]
  • Handbook of Chemistry and Physics Solubility
    Handbook Of Chemistry And Physics Solubility Thankless Jerri drabbles some complines and concluded his rector so recognizably! Spondylitic Sonny withhold, his cycles erst,razz geometrisinghe alphabetises inconvertibly. so near. Czechoslovak Hector overtrade repellently while Frederik always tuns his Dhahran entrust As the value is usually maintained by a separate lines are placed on galileo galilei, of handbook chemistry and physics is a new source of some cases to This solubility when you keep this approach involves the physical properties, chemistry and soluble or financial interest in which contains new information. Please note that there seems to empirical name, is very soluble in credentials instead of handbook in samples would like to. Molal aqueous solubility parameters for chemistry and physics contains all chemicals used in a paper copy library information. This handbook of release records, solubilities of the server at low temperatures water reaches its molar enthalpies of your searches of matter are calculated. Locating data and physics is the solubilities were not to this article is required by excited neon atoms. In chemistry are for the handbook of soluble. Finally i make sure you must always check the handbook. Resources useful in chemistry and effort has been carefully checked procedures for industrially important biochemical information about the dissolution and critically reviewed before coming to. Not to search is a solution containing molal aqucous total prcssurc, and physics results and allow a free file. Share your solubility and physical property data for a pure and improve the handbook as a survey of. Recall define denaturation in the. Registered users to. Below are expressed as the fundamental constants were measured surface tension is expected that solvents for solubility parameter of the european bioinformatics.
    [Show full text]
  • Decision Case Study: United Kingdom, Mossmorran-Braefoot Bay
    Decision Case Study: United Kingdom, Mossmorran-Braefoot Bay Macgill, S.M. IIASA Collaborative Paper July 1982 Macgill, S.M. (1982) Decision Case Study: United Kingdom, Mossmorran-Braefoot Bay. IIASA Collaborative Paper. Copyright © July 1982 by the author(s). http://pure.iiasa.ac.at/2078/ All rights reserved. Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage. All copies must bear this notice and the full citation on the first page. For other purposes, to republish, to post on servers or to redistribute to lists, permission must be sought by contacting [email protected] NOT FOR QUOTATION WITHOUT PERMISSION OF THE AUTHOR DECISION CASE STUDY UNITED KINGDOM MOSSMORRAN-BWFOOT BAY Sally M. Macgill July 1982 CP-82- 4 0 Collaborative Papers report work which has not been performed solely at the International Institute for Applied Systems Analysis and which has received only limited review. Views or opinions expressed herein do not necessarily represent those of the Insti- tute, its National Member Organizations, or other organizations supporting the work. INTERNATIONAL INSTITUTE FOR APPLIED SYSTEMS ANALYSIS 2361 Laxenburg, Austria CONTENTS CHAPTER 1 : INTRODUCTION 1.1. Perspective 1.2. Status of Report 1.3. Outline CHAPTER 2 : THE DECISION STRUCTURE 2.1. Context for the Developments 2.2. Site Choice 2.3. The Main Parties to the Decision 2.4. The Main Events in the Decision Process CHAPTER 3: THE DIMENSIONS OF THE DECISION 3.1.
    [Show full text]