DEPC-Treated Water Rev 12/20

Total Page：16

File Type：pdf, Size：1020Kb

FOR RESEARCH ONLY! DEPC-Treated Water Rev 12/20 ALTERNATE NAMES: RNase- and DNase-free water, RNase-free water, Molecular Biology Grade water, DEPC Water, Sterile water CATALOG #: M1500-100 100 ml M1500-1000 1 L APPEARANCE: Clear, Colorless liquid FEATURES: Ready-to-use Solution For RNA experiments RNase and DNase Free Molecular Biology Grade FORMULATION: 0.1 % v/v Diethyl Pyrocarbonate (DEPC) in water DESCRIPTION: DEPC is a non-specific inhibitor of Ribonucleases (RNases). To reduce degradation of RNA in experiments, water is treated with DEPC. The concentration of DEPC is 0.1%. Ultra-pure molecular biology grade water is treated with DEPC followed by auto-claving. Autoclaving inactivates DEPC by causing hydrolysis of DEPC and release of by-products ethanol and carbon-dioxide. DEPC modifies enzymes containing -NH, -SH, or -OH groups in their active sites. DEPC particularly reacts with Cys, His, Lys, Ser and Tyr residues of proteins. DEPC has a half-life of approximately 30 min in water. DEPC-Treated Water (0.1%) can be used with buffers such as PBS and MOPS but cannot be used with the buffers Tris and HEPES. Tris and HEPES make DEPC unavailable to inactivate RNase. DEPC-treated water should not be added to aqueous solutions of ammonia as it will result in the formation of urethane, a possible carcinogen. qPCR, Real-Time RT-PCR, cDNA synthesis and RNase protection assays APPLICATIONS: STORAGE TEMPERATURE: Room Temperature. Avoid long exposure to UV light. HANDLING: Do not take internally. Wear gloves and mask when handling the product! Avoid contact by all modes of exposure. RELATED PRODUCTS: RNase Activity Detection/Quantification Assay Kit (Fluorometric) (Cat. No. K934) RNA Purification Kits (Cat. Nos. K1337, K1351, K1373, K1374, K1418, K1419) RNaseOFF ribonuclease Inhibitor (Cat. No. M1238) ToxOut™ Endotoxin Free Water (Cat. No. 7938) Phosphate Buffered Saline (PBS 10X) (Cat. No. 2113) DISCLAIMER: FOR RESEARCH USE ONLY! Not to be used on humans. 155 S. Milpitas Blvd., Milpitas, CA 95035 USA | T: (408)493-1800 F: (408)493-1801 | www.biovision.com | [email protected] .

Copy Link

Recommended publications

Ready-To-Run Buffers and Solutions
Electrophoresis Ready-to-Run Buffers and Solutions Bio-Rad is a premier provider of buffers and premixed reagents for life science research. We offer a variety of different products for all your protein and nucleic acid experiments. Whether you need powdered reagents or premixed solutions, Bio-Rad reagents meet the highest quality standards to ensure consistency and reliability in your experiments. FastCast™ Solutions FastCast Solutions Access all the benefits of TGX™ and Solution Applications TGX Stain-Free™ gel chemistries with TGX™ FastCast™ acrylamide starter kit, 7.5% Protein Separation the fastest gel run times, the most TGX FastCast acrylamide kit, 7.5% Protein Separation efficient transfers, stain-free visualization TGX FastCast acrylamide starter kit, 10% Protein Separation in 5 minutes, as well as a long shelf life TGX FastCast acrylamide kit, 10% Protein Separation (1 month after casting) using convenient TGX FastCast acrylamide starter kit, 12% Protein Separation premixed handcasting solutions. TGX FastCast acrylamide kit, 12% Protein Separation Long shelf life TGX chemistry retains TGX Stain-Free™ FastCast™ acrylamide starter kit, 7.5% Protein Separation Laemmli-like separation characteristics TGX Stain-Free FastCast acrylamide kit, 7.5% Protein Separation while using a standard Tris/glycine TGX Stain-Free FastCast acrylamide starter kit, 10% Protein Separation running buffer system. TGX Stain-Free FastCast acrylamide kit, 10% Protein Separation TGX Stain-Free FastCast acrylamide starter kit, 12% Protein Separation TGX Stain-Free FastCast acrylamide kit, 12% Protein Separation Gel Casting Solutions Gel Casting Buffers Tris Buffers and Acrylamide Solutions Solution Applications for Gel Casting 1.5 M Tris-HCI, pH 8.8 Resolving gel preparation Bio-Rad offers a variety of prepared 0.5 M Tris-HCI, pH 6.8 Stacking gel preparation solutions for casting polyacrylamide Acrylamide Solutions gels.
[Show full text]
Tris(Hydroxymethyl)Aminomethane; Tris
Tris(hydroxymethyl)aminomethane; Tris Technical Bulletin No. 106B IMPORTANT NOTICE The "Tris" described in this bulletin is Tris(hydroxymethyl)aminomethane. It is not the "Tris" used to flame-proof fabric. The latter, Tris(2,3-dibromopropyl)phosphate, has been reported to be a cancer suspect agent. Trizma® is Sigma's registered trademark applied to various compounds of tris(hydroxymethyl)- aminomethane (tris) prepared by Sigma. For example, Trizma HCl is the completely neutralized crystalline hydrochloride salt of tris. Trizma Base is the pure tris itself. Trizma and its salts have been useful as buffers in a wide variety of biological systems. Uses include pH control in vitro1,2 and in vivo,3,4 for body fluids and as an alkalizing agent in the treatment of acidosis of the blood.5 Trizma has been used as a starting material for polymers, oxazolones (with carboxylic acids) and oxazolidines (with aldehydes).6 Trizma does not precipitate calcium salts and is of value in maintaining solubility of manganese salts.7 PRIMARY BASIMETRIC STANDARD Trizma Base meets many of the requirements for a primary basimetric standard. It is pure, essentially stable, relatively non-hygroscopic and has a high equivalent weight. Trizma Base can be dried at 100°C for up to 4 hours.8 It can be used for the direct standardization of a strong acid solution; the equivalence point can be determined either potentiometrically or by use of a suitable indicator: [3-(4-Dimethylamino-1-naphthylazo)-4- methoxybenzenesulfonic acid, Product No. D5407]. Tris(hydroxymethyl)aminomethane (Trizma Base) -- Physical Data Empirical Formula: C4 H11 N O3 Molecular Weight: 121.14 Equivalent Weight: 121.14 pH of 0.05 M aqueous solution: 10.4* Kb = 1.202 × 10-6 at 25° (pKa = 8.08)9 Trizma HCl -- Physical Data Empirical Formula: C4 H12 Cl N O3 Molecular Weight: 157.6 Equivalent Weight: 157.6 pH of 0.05 M aqueous solution: 4.7* *Trizma HCl in solution will produce a pH of approximately 4.7, but will have little if any buffering capacity.
[Show full text]
Novel Process for the Preparation of Serinol
Europaisches Patentamt 0 348 223 J European Patent Office fin Publication number: A2 Office europeen des brevets EUROPEAN PATENT APPLICATION Application number: 89306393.3 int. a*: C 07 C 89/00 C 07 C 91/12 Date of filing: 23.06.89 Priority: 23.06.88 US 210945 ® Applicant: W.R. Grace & Co.-Conn. 1114 Avenue of the Americas New York New York 1 0036 (US) Date of publication of application: 27.12.89 Bulletin 89/52 @ Inventor: Quirk, Jennifer Maryann 6566 River Clyde Drive Designated Contracting States: 20777 (US) AT BE CH DE ES FR GB GR IT LI LU NL SE Highland Maryland Harsy, Stephen Glen 16236 Compromise Court Mt. Airy Maryland 21771 (US) Hakansson, Christer Lennart Vikingsgaten 3 S-25238Helsingborg (SE) @ Representative: Bentham, Stephen et al J.A. Kemp & Co. 14 South Square Gray's Inn London WC1R5EU (GB) @ Novel process for the preparation of serinol. (g) A process for forming 2-amino-1 ,3-propanediol by reduc- ing a 5-nitro-1,3-dioxane and subsequently hydrolyzing the reduced compound. CO SI 00 3 Q_ LU Bundesdruckerei Berlin EP 0 348 223 A2 Description NOVEL PROCESS FOR THE PREPARATION OF SERINOL The present invention relates to a novel process to form 2-amino-1 ,3-propanediol (commonly known as "serinol"). The present process provides a means of forming serinol using readily formed materials under mild 5 and easily handled conditions suitable for industrial application. Serinol is a highly desired material required for the preparation of nonionic x-ray contrast media, such as iopanediol (N,N'-bis[2-hydroxy-1-(hydroxymethyl)ethyl]-2,4,6-triiodo-5-lactamidisophthalamide).
[Show full text]
Diethyl Pyrocarbonate at Ph6.5, When 0.58+0.1Residue Of
Aiochem. J. (1974) 139, 797-800 797 Printed in Great Britain Histidine Residues and the Enzyme Activity of Pig Heart Supernatant Malate Dehydrogenase By J. JOHN HOLBROOK, A. LODOLA and NICHOLAS P. ILLSLEY Department ofBiochemistry, University ofBristol, Bristol BS8 1TD, U.K. (Received 25 February 1974) 1. Supernatant pig heart malate dehydrogenase is completely inhibited by reaction with diethyl pyrocarbonate at pH6.5, when 0.58+0.1 residue of ethoxycarbonylhistidine is formed per NADH-binding site. 2. Oxaloacetate and hydroxymalonate protect the en- zyme from inhibition in the absence of coenzyme. 3. Limited ethoxycarbonylation does not alter the binding of NADH to the enzyme but prevents the enzyme-NADH complex from interacting with hydroxymalonate in a ternary complex. Supematant malate dehydrogenase and lactate de- and the crystals were dissolved in 20mM-H3P04 hydrogenase have very similar tertiary structures adjusted to pH6.5 with 5M-NaOH and then filtered (Hill et al., 1972; Adams et al., 1972). Histidine-195 through a column of Sephadex G-50 equilibrated in plays a central role in the activity of lactate dehydro- the same buffer. If (NH4)2SO4 was not completely genase as the acceptor and donor of the proton in- removed it competed effectively for the diethyl pyro- volved in the reaction (Holbrook & Gutfreund, 1973). carbonate. This latter reagent was obtained from A proton is also a reactant for malate dehydrogenase, Sigma (London) Chemical Co., Kingston-on- and the work reported here is an attempt to discover Thames, U.K., and the batch used in these experi- if this enzyme also has a histidine residue with the ments was 2.6M when assayed as described by same function as histidine-195 of lactate dehydro- Holbrook & Ingram (1973).
[Show full text]
Bis-Tris (B4429)
Bis-Tris Cell Culture Tested Product Number B 4429 Product Description Bis-Tris buffer has been utilized in a study of λ cro 7 Molecular Formula: C8H19NO5 repressor self-assembly and dimerization. An Molecular Weight: 209.2 investigation of the ligand binding properties of the CAS Number: 6976-37-0 human hemoglobin variant (Hb Hinsdale) has used 8 pKa: 6.5 (25 °C) Bis-Tris buffer. Synonyms: 2-bis(2-hydroxyethyl)amino-2- (hydroxymethyl)-1,3-propanediol, bis(2- Precautions and Disclaimer hydroxyethyl)amino-tris(hydroxymethyl)methane, For Laboratory Use Only. Not for drug, household or 2,2-bis(hydroxymethyl)-2,2',2''-nitrilotriethanol other uses. This product is cell culture tested (4.2 mg/ml) and is Preparation Instructions designated as Biotechnology Performance Certified. It This product is soluble in water (500 mg/ml), yielding a is tested for endotoxin levels and for the absence of clear, colorless to very faint yellow solution. nucleases and proteases. References Bis-Tris is a zwitterionic buffer that is used in 1. Good, N. E., et al, Hydrogen ion buffers for biochemistry and molecular biology research. It is biological research. Biochemistry, 5(2), 467-477 structurally analogous to the the Good buffers that (1966). were developed to provide buffers in the pH range of 2. Molecular Cloning: A Laboratory Manual, 3rd ed., 6.15 - 8.35 for wide applicability to biochemical Sambrook, J. and Russell, D. W., CSHL Press studies.1 The useful pH range of Bis-Tris is 5.8 - 7.2. (Cold Spring Harbor, NY: 2001), pp. 7.26-7.30.
[Show full text]
Flammable Liquids and Solids Chemical Class Standard Operating Procedure
1 Flammable Liquids and Solids Chemical Class Standard Operating Procedure Flammable Liquids and Solids H224 H225 H226 H227 H228 This SOP is not a substitute for hands-on training. Print a copy and insert into your laboratory SOP binder. Department: Chemistry Date SOP was written: Thursday, July 1, 2021 Date SOP was approved by PI/lab supervisor: Thursday, July 1, 2021 Name: F. Fischer Principal Investigator: Signature: ______________________________ Name: Matthew Rollings Internal Lab Safety Coordinator or Lab Manager: Lab Phone: 510.301.1058 Office Phone: 510.643.7205 Name: Felix Fischer Emergency Contact: Phone Number: 510.643.7205 Tan Hall 674, 675, 676, 679, 680, 683, 684 Location(s) covered by this SOP: Hildebrand Hall: D61, D32 1. Purpose This SOP covers the precautions and safe handling procedures for the use of Flammable Liquids and Solids. For a list of Flammable Liquids and Solids covered by this SOP and their use(s), see “List of Chemicals”. Procedures described in Section 12 apply to all materials covered in this SOP. A change to the “List of Chemicals” does not constitute a change in the SOP requiring review or retraining. If you have questions concerning the applicability of any recommendation or requirement listed in this procedure, contact the Principal Investigator/Laboratory Supervisor or the campus Chemical Hygiene Officer at [email protected]. Rev. Date: 2021-06-29 2 Flammable Liquids and Solids Chemical Class Standard Operating Procedure 2. Physical & Chemical Properties/Definition of Chemical Group Flammable liquid means a liquid having a flash point1 of not more than 199.4 °F (93 °C).
[Show full text]
Formaldehyde Cross-Linking of Chromatin from Drosophila
2 Formaldehyde Cross-linking of Chromatin from Drosophila Protocol from modEncode IGSB University of Chicago originally written by Alex Crofts and Sasha Ostapenko and updated by Matt Kirkey. 1. Set centrifuge on fast temp to cool down to 4°C (sign out centrifuge). 2. Turn on sonicator, clean probes (sign out sonicator). 3. Prep A1 and Lysis buffers. 4. Collect material, wash with embryo wash buffer. 5. Add material to a Broeck-type homogenizers(Wheaton #357426). Embryo’s can be collected directly in Douncer-type homogenizer(Wheaton #357544). 6. Add 6 mL A1 buffer to Potter homogenizers. 7. Add 500 uL of 20% formaldehyde (to 1.8%) and begin 15’ timer. 8. Homogenize material (100-300mg/IP of embryos, larvae, pupae, adults) first in Broeck homogenizer (frosted) and then in Douncer (clear) with type A pestle (tight) at RT (6 strokes each). 9. Transfer homogenate to 15mL polystyrene tube. Mix by inverting every 5 minutes. 10. Once 15’ timer is up, add 540 uL of 225 mM glycine solution, mix and incubate 5’ at RT. 11. Put on ice and keep on ice unless specified. 12. Centrifuge 5’ at 4000 rpm at 4°C. Discard supernatant. 13. Add 3mL of buffer A1. Resuspend the pellet and centrifuge for 5’ at 4000 rpm and 4°C. Repeat this washing step 3 more times. 14. Wash once in 3 mL of lysis buffer without SDS. Centrifuge for 5’ at 4000 rpm and 4°C. Discard supernatant. 15. Resuspend the cross-linked material in 0.5 mL of lysis buffer. Add SDS to 0.1% (2.5 uL of 20% SDS) and N-lauroylsarcosine to 0.5% (12.5 uL of 20% solution).
[Show full text]
Protein Gel Electrophoresis Technical Handbook Separate Transfer Detect 2
Western blotting Protein gel electrophoresis technical handbook separate transfer detect 2 Comprehensive solutions designed to drive your success Protein gel electrophoresis is a simple way to separate proteins prior to downstream detection or analysis, and is a critical step in most workflows that isolate, identify, and characterize proteins. We offer a complete array of products to support rapid, reliable protein electrophoresis for a variety of applications, whether it is the first or last step in your workflow. Our portfolio of high-quality protein electrophoresis products unites gels, stains, molecular weight markers, running buffers, and blotting products for your experiments. For a complete listing of all available products and more, visit thermofisher.com/separate For orderingordering informationinformation referrefer to pagepage XX.XX ForForqr quickquickrk referencereferencee on the protocolprotocol pleasepleasere referrefertr totopo pagepage XX. Prepare samples Choose the electrophoresis Select precast gel and select buffers Select the standard chamber system and power supply Run the gel Stain the gel Post stain 3 Contents Electrophoresis overview 4 Select precast gel Gel selection guide 8 Gels 10 Prepare samples and select buffers Sample prep kits 26 Buffers and reagents 28 Buffers and reagents selection guide 29 Select the standard Protein ladders 34 Protein standards selection guide 36 Choose the electrophoresis chamber system and power supply Electrophoresis chamber systems 50 Electrophoresis chamber system selection guide 51
[Show full text]
Biological Buffers Download
infoPoint Biological Buffers Application Many biochemical processes are markedly impaired by even small changes in the concentrations of free H+ ions. It is therefore usually necessary to stabilise the H+ concentration in vitro by adding a suitable buffer to the medium, without, however, affecting the functioning of the system under investigation. A buffer keeps the pH value of a solution constant by taking up protons that are released during reactions, or by releasing protons when Keywords they are consumed by reactions. • Buffer characteristics This handout summarizes the most commonly • Useful pH range used buffer substances and their respective • Preparing buffer solutions physical and chemical properties. • Common buffer solutions Practical tips – Preparing buffer solutions Recommendations for the setting of the pH value of a buffer and storage conditions Temperature 3. If a buffer is available in the protonised form (acid) and the non-protonised form (base), the Depending on the buffer substance, its pH may pH value can also be set by mixing the two vary with temperature. It is therefore advisable, substances. as far as possible, to set the pH at the working 4. Setting of the ionic strength of a buffer solution temperature to be used for the investigation. (if necessary) should be done in the same way as For instance the physiological pH value for most the setting of the pH value when selecting the mammalian cells at 37°C is between 7.0 and 7.5. electrolyte, since this increases depending on the The temperature dependence of a buffer system electrolyte used. is expressed as d(pKa)/dT, which describes the 5.
[Show full text]
Guidesheet and Formulas Learly Label All Containers with Content Name
Biological Abbreviations GuideSheet and Formulas learly label all containers with content name. Write out the complete chemical and/or biological name or use abbreviations (useful for small containers). If abbreviations are used, display this guide sheet prominently at C several locations in each lab. Extend the list with lab-specific abbreviations, as necessary. Full Name/Formula Abbreviation Full Name/Formula Abbreviation 2-(N-morpholino)ethanesulfonic acid MES Tris/borate/EDTA TBE 3-(N-morpholino)propanesulfonic acid MOPS Tris/EDTA TE 3-[(3-Cholamidopropyl) Tris/EDTA/sodium chloride TEN CHAPS dimethylammonio]-1-propanesulfonate Tris/glycine/SDS TGS 4-(2-hydroxyethyl)-1- HEPES piperazineethanesulfonic acid Tris/phosphate/EDTA TPE Bovine serum albumin BSA Tris/sodium chloride/Tween 20 TNT Dulbecco's Modified Eagle Medium DMEM Tween 20/TBS TTBS Dulbecco's phosphate-buffered saline DPBS Glycerol, Tris-HCl, EDTA, Bromphenol 6 x DNA Loading dye Blue, Xylene Cyanol FF (DNA Agarose gels) (RT) Ethylene glycol-bis(β-aminoethyl EGTA ether)-N,N,N′,N′-tetraacetic acid Protein A/G A/G (4°) Ethylenediaminetetraacetic acid EDTA Alkaline Phosphatase AP (4°) g,4-Dihydroxy-2-(6-hydroxy-1- Fetal bovine serum FBS BFA – Brefeldin A heptenyl)-4 cyclopentanecrotonic acid Solution (4°) Hanks balanced salt solution HBSS l-lactone HEPES-buffered saline solution HeBS 2-Bis(2-hydroxyethyl)amino-2- Bis-Tris (RT) (hydroxymethyl)-1,3-propanediol piperazine-N,N′-bis(2-ethanesulfonic PIPES acid) Caesium chloride (used for plasmid CsCl2 (RT) prep) Phosphate-buffered
[Show full text]
Chapter 8: Monoprotic Acid-Base Equilibria
Chapter 8: Monoprotic Acid-Base Equilibria Chapter 6: Strong acids (SA) and strong bases (SB) ionize completely in water (very large K) [H +] ions produced equals [S.A.] Example: What is the pH of 0.050 M HCl solution? HCl is S.A. so [HCl] = [H +]. Thus, pH = - log [H +] = - log (0.050); pH = 1.30 Similarly, [OH -] in solution will be equal to [S.B.] x number OH - per formula unit Challenge: What is the pH of 1.0 x 10 -8 M HCl? What is the pH of 1.0 x 10 -8 M NaOH? pH = 8 for a 10 -8 M acid??? pH = 6 for a 10 -8 M base??? We are adding an acid to water (at a pH of 7) and then saying that the solution becomes more basic? We neglected the dissociation of water! Summary: pH calculations of strong acids and strong bases 1. At relatively high [S.A] or [S.B.], i.e. ≥ 10 -6 M, pH is calculated from [S.A.] or [S.B.] 2. In very dilute [S.A] or [S.B.], i.e. ≤ 10 -8 M, dissociation of water is more important, so the pH is 7. 1 Question: How do we know if a given acid is strong or weak? Know the 6 S.A. and six S.B. by heart Weak Acids and Weak Bases Weak acids (HA) and weak bases (B) do not dissociate completely . An equilibrium exists between reactants and products The equilibrium lies to the left (Ka for a weak acid is < 1) => mostly HA or B in solution The dissociation (ionization) of a weak acid , HA , in water: Ka - + HA (aq) + H 2O(l) A (aq) + H 3O (aq) Weak acid Conj.
[Show full text]
Detection and Characterization of Sorbitol Dehydrogenase from Apple Callus Tissue" 2 Received for Publication November 27, 1978 and in Revised Form February 28, 1979
Plant Physiol. (1979) 64, 69-73 0032-0889/79/64/0069/05/$00.50/0 Detection and Characterization of Sorbitol Dehydrogenase from Apple Callus Tissue" 2 Received for publication November 27, 1978 and in revised form February 28, 1979 FAYEK B. NEGM AND WAYNE H. LOESCHER Department ofHorticulture and Landscape Architecture, Washington State University, Pullman, Washington 99164 Downloaded from https://academic.oup.com/plphys/article/64/1/69/6077558 by guest on 24 September 2021 ABSTRACT provided evidence for the presence of a polyol dehydrogenase (13). Data from labeling studies suggest that sorbitol is synthesized Sorbitol dehydrogenase (L-iditol:NAD' oxidoreductase, EC 1.1.1.14) in the leaf by way of fructose-6-P which is reduced to sorbitol-6- has been detected and characterzed from apple (Maims donestica cv. P and subsequently dephosphorylated (3, 20). Others, however, Granny Smith) mesocarp tissue cultures. The enzyme oxidized sorbitol, have reported the conversion of D-glucose to sorbitol in apple ( 11) xylitol, L-arabitol, ribitol, and L-threitol in the presence of NAD. NADP and plum leaves (1) when [1'CJglucose was used as a substrate. could not replace NAD. Mannitol was slightly oxidized (8% of sorbitol). Studies of breakdown of ['4Clsorbitol in fruit and other tissues Other polyols that did not serve as substrate were galactitoL myo-inositoL indicate that the polyol may be converted to a hexose (1), primarily D-arabitoL erythritol, and glycerol. The dehydrogenase oxidized NADH in fructose (9). the presence of n-fructose or L-sorbose. No detectable activity was ob- Chong and Taper (6) were able to grow apple callus tissue using served with D-tagatose.
[Show full text]