Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes Thin Encoders fit Push but are NOT touch Ableton Push 11 sensitive Thin Encoders fit Push but are NOT touch Ableton Push 2 11 sensitive

Chroma Caps fit great on the Access Virus TI! We Access Virus TI 32 recommend these:

Chroma Caps fit on the Akai APC 20. Fader caps will fit on a fader stem but are too close together Akai APC20 MK1 1 and might interfere with each other when put on adjacent faders. We recommend the following set:

Chroma Caps fit on the Akai APC 20. Fader caps will fit on a fader stem but are too close together Akai APC40 MK1 1 0 17 and might interfere with each other when put on adjacent faders. We recommend the following set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

Akai APC40 Mk2 10 0 18 Chroma caps sit high on the APC40 MKII.

Chroma Caps fit great on the Akai LPD8 Wireless! We Akai LPD8 Wireless 8 recommend these: Chroma Caps fit great on the Allen & Heath Xone:42! Allen & Heath Xone:42 16 5 We recommend these: Chroma Caps fit great on the Allen & Heath Xone:4D! Allen & Heath Xone:4D 52 5 10 We recommend these: Chroma Caps fit great on the Allen & Heath Xone:62! Allen & Heath Xone:62 25 We recommend this set: Chroma Caps fit great on the Xone:92, faders will also fit on the Xone:92 but can rotate laterally a bit Allen & Heath Xone:92 40 when on the fader stems. We recommend the following set:

Fader MK2 caps fit on the Xone:96 but might have some lateral motion. Gain knobs can be replaced Allen & Heath Xone:96 54 5 too with 90° Super Knobs but reduced space might complicate operation.

Chroma Caps fit great on the Allen & Heath Xone: Allen & Heath Xone:DB2 28 5 2 DB2! We recommend these: Chroma Caps fit great on the Allen & Heath Xone: Allen & Heath Xone:DB4 18 5 DB4! We recommend these: Chroma Caps fit well on the Xone:K2 but sit Allen & Heath Xone:K2 12 slightly high off the top surface. We recommend the following set: Chroma Caps fit great on the Allen & Heath Xone: Allen & Heath Xone:PX5 30 5 PX5! We recommend these: Chroma Caps fit great on the American Audio VMS2! American Audio VMS2 11 5 We recommend these: Chroma Caps fit great on the American Audio VMS4! American Audio VMS4 27 7 We recommend these: Chroma Caps fit great on the Arturia Beatstep Pro! We Arturia Beatstep Pro 20 recommend these: Chroma Caps fit great on the Arturia DrumBrute! We Arturia DrumBrute 40 3 recommend these: Chroma Caps fit great on the Arturia MicroBrute! We Arturia MicroBrute 20 recommend these: Chroma Caps fit great on the Arturia MiniLab! We Arturia MiniLab 16 recommend these: Behringer BCD3000 18 5 Chroma Caps fit great on the Behringer CMD DC-1! Behringer CMD DC-1 0 8 We recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes Chroma Caps fit great on the Behringer CMD DV-1! Behringer CMD DV-1 12 We recommend this set: Chroma Caps fit great on the Behringer CMD LC-1! Behringer CMD LC-1 8 We recommend this set: Chroma Caps fit great on the Behringer CMD MM-1! Behringer CMD MM-1 12 5 4 We recommend this set: Chroma Caps fit great on the Behringer CMD PL-1! Behringer CMD PL-1 8 We recommend this set: Chroma Caps fit great on the Behringer DDM 4000! Behringer DDM 4000 28 5 3 We recommend this set:

Chroma Caps fit great on the Behringer DJX-750! We Behringer DJX-750 27 6 1 recommend this set:

Chroma Caps fit great on the Behringer Neutron! We Behringer Neutron 36 recommend this set: Chroma Caps fit great on the Behringer VMX-300! We Behringer VMX-300 19 4 recommend this set: Behringer X-TOUCH 8 0 Please note that Chroma Caps are NOT touch sensitive. Behringer X-TOUCH Mini 1 8 0 Please note that Chroma Caps are NOT touch sensitive. Chroma Caps fit great on the Denon DN-X120! We Denon DN-X120 15 3 0 recommend this set: Chroma Caps fit well on the Denon DN-X1600 but the Denon DN-X1600 27 5 faders sit a little high off the mixer surface. We recommend the following set: Chroma Caps fit great on the Denon DN-X300! We Denon DN-X300 20 3 0 recommend this set: Chroma Caps fit great on the Denon MC4000! We Denon MC4000 22 5 3 recommend this set: Chroma Caps fit great on the Denon MC7000! We Denon MC7000 37 7 0 6 recommend this set: Chroma Caps fit great on the Denon MCX-8000! We Denon MCX-8000 42 2 recommend this set:

Chroma Caps fit great on the Denon Prime 4! We Denon Prime 4 33 5 4 8 recommend this set:

Chroma Caps fit great on the DJ Tech DIF-1M! We DJ Tech DIF-1M 14 3 2 recommend this set: Chroma Caps fit great on the DJ Tech DIF-S2! We DJ Tech DIF-S2 12 3 recommend this set: Chroma Caps fit great on the Pioneer DJM-250 MK2! Pioneer DJM-250 MK2 2 11 4 3 We recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes Chroma Caps work great on a Twister! Customize your DJTT Midi Fighter Twister 16 encoders below: Chroma Caps fit great on the DSI Pro 2! We DSI Pro 2 36 15 recommend this set: Chroma Caps fit great on the DSI Tempest! We DSI Tempest 10 14 recommend this set: Chroma Caps fit perfectly on the Ecler Evo 4! We Ecler Evo 4 21 7 4 recommend this set: Chroma Caps fit perfectly on the Ecler Nuo 4! We Ecler Nuo 4 5 5 12 recommend this set: Chroma Caps fit perfectly on the Elektron Analog Elektron Analog Four 1 0 0 11 Four! We recommend this set: Chroma Caps fit perfectly on the Elektron Octatrack Elektron Octatrack MK2 1 1 0 0 7 MK2! We recommend this set: Chroma Caps fit perfectly on the Elektron Analog Elektron Analog Rytm 1 0 9 Rytm! We recommend this set: Chroma Caps fit great on the Gemini MM1! We Gemini MM1 9 1 recommend this set: Chroma Caps fit great on the Hercules DJControl Hercules DJControl Instinct P8 6 3 3 Instinct P8! We recommend this set: Chroma Caps fit perfectly on the Hercules RMX! We Hercules RMX 7 6 recommend this set: Chroma Caps fit perfectly on the Korg Electribe 2/Electribe Sampler 13 5 2/Electribe Sampler! We recommend this set: Chroma Caps fit perfectly on the Korg Korg Kaoss Pad Quad 2 1 Quad! We recommend these knobs: Chroma Caps fit perfectly on the Korg Kaossilator Pro! Korg Kaossilator Pro 0 1 3 We recommend this set: Chroma Caps fit perfectly on the Korg KP3! We Korg KP3 0 1 3 recommend this set: Chroma Caps fit perfectly on the ! We Korg Kronos 8 10 recommend this set: Chroma caps fit well on the Minilogue. Light 27 1 rubbing may occur on a few knobs due to curve of faceplate. Korg Minilogue XD 26 Chroma caps fit well on the Minilogue XD! We recommend the following pack: 15 Chroma Caps fit perfectly on the Korg Monologue! We recommend this set: Korg SV-1 73 15 Chroma Caps fit perfectly on the Korg SV-1 73! We recommend this set: Korg SV-1 88 15 Chroma Caps fit perfectly on the Korg SV-1 88! We recommend this set: Chroma Caps fit perfectly on the Livid CNTRL:R! We Livid CNTRL:R 0 12 0 recommend this set: Chroma Caps fit perfectly on the M-Audio Axiom 25! M-Audio Axiom 25 8 We recommend this set: Chroma Caps fit perfectly on the M-Audio Torq M-Audio Torq Xponent 8 5 12 Xponent! We recommend this set: Chroma Caps fit perfectly on the M-Audio Trigger M-Audio Trigger Finger 8 Finger! We recommend this set: Chroma Caps fit perfectly on the Korg MS-20 Mini! Korg MS-20 Mini 29 7 We recommend this set:

Chroma Caps fit perfectly on the Mixars Duo! We Mixars Duo 15 3 3 recommend this set:

Yes, you can replace the single encoder on the NI NI Maschine Jam 1 Maschine Jam with Chroma Caps! Choose your color: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes Chroma Caps fit perfectly on the NI Maschine Mikro NI Maschine Mikro Mk1 1 Mk1! We recommend this set: NI Maschine Mikro Mk2 1 Thin1 or Thick encoders both fit the Mashine Mikro MK2 great. Thin encoders work well on the NI Maschine MK1! NI Maschine MK1 0 11 We recommend this set: Chroma Caps fit perfectly on the MK2 Maschine. Please note that the Chroma encoder is smaller NI Maschine MK2 1 8 than the stock knob. We recommend the following set: Chroma Caps fit perfectly, but are not touch NI Maschine Studio 1 8 sensitive. We recommend the following set: Chroma Caps fit perfectly, but are not touch NI Traktor Kontrol D2 4 4 2 4 sensitive. We recommend the following set: Chroma Caps fit perfectly on the NI Traktor NI Traktor Kontrol F1 4 4 0 1 Kontrol F1, we recommend the following set: Chroma Caps were designed with the Kontrol S2 NI Traktor Kontrol S2 Mk1 16 5 0 5 2 in mind, and fit perfectly. We recommend this set: Chroma Caps were designed with the Kontrol S2 NI Traktor Kontrol S2 Mk2 16 5 0 4 2 MK2 in mind, and fit perfectly. We recommend this set:

Chroma Caps fit well on the NI Traktor Kontrol S2 NI Traktor Kontrol S2 Mk3 9 6 Mk3! Encoders do have a slight gap at the bottom due to their new recessed design. We recommend this set:

Chroma Caps were designed with the Kontrol S4 NI Traktor Kontrol S4 Mk1 22 7 4 5 4 in mind, and fit perfectly. We recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

Chroma Caps were designed with the Kontrol S4 NI Traktor Kontrol S4 Mk2 22 7 4 5 4 MK2 in mind, and fit perfectly. We recommend this set:

Chroma Caps fit well on the NI Traktor Kontrol S4 Mk3! Super Knobs do have a slight gap at the bottom NI Traktor Kontrol S4 Mk3 28 7 4 6 of the EQ section due to their new recessed design. We recommend this set:

Chroma Caps fit perfectly on the Kontrol S5 but they are not touch sensitive, so remove the NI Traktor Kontrol S5 28 5 4 5 Encoders and 8 Super Knobs if you'd like to retain that functionality. Chroma Caps fit perfectly on the Kontrol S5 but they are not touch sensitive, so remove the NI Traktor Kontrol S8 28 13 4 5 8 Encoders and 8 Super Knobs if you'd like to retain that functionality. Chroma Caps were designed with the Kontrol X1 NI Traktor Kontrol X1 8 0 4 in mind, and fit perfectly. We recommend this set: Chroma Caps were designed with the Kontrol X1 NI Traktor Kontrol X1 MK2 8 0 3 MK2 in mind, and fit perfectly. We recommend this set: Chroma Caps fit perfectly on the NI Traktor Kontrol NI Traktor Kontrol Z1 11 3 2 Z1! We recommend this set: Chroma Caps were designed with the Kontrol Z2 NI Traktor Kontrol Z2 18 3 4 3 in mind, and fit perfectly. We recommend this set: Important: Thin encoders sit high on Circuit, but will Novation Circuit 1 1 8 fit. Chroma Caps fit perfectly on the Novation Novation LaunchControl 16 LaunchControl! We recommend this set: Chroma Caps fit perfectly on the Novation Novation LaunchControl XL 24 LaunchControl XL! We recommend this set: Chroma Caps fit perfectly on the Novation Launchkey Novation Launchkey 25 8 25! We recommend this set: Chroma Caps fit perfectly on the Novation Launchkey Novation Launchkey 49 8 49! We recommend this set: Chroma Caps fit perfectly on the Novation Launchkey Novation Launchkey Mini MK1 8 Mini MK1! We recommend this set: Novation Launchkey Mini MK2 Sadly our caps don't fit the Launchkey Mini MK2 Chroma Caps fit perfectly on the Novation Twitch! We Novation Twitch 14 3 3 4 recommend this set: Chroma Caps fit perfectly on the Numark 4Trak! We Numark 4Trak 30 7 0 1 recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes Chroma Caps fit perfectly on the Numark IDJ Pro! We Numark IDJ Pro 11 3 recommend this set: Chroma Caps fit perfectly on the Numark Mixdeck, but the Faders can bottom out on the controller surface. This can be fixed by placing a piece of paper between Numark Mixdeck 11 6 the fader and surface while installing the knobs to create a clearance between the surface and the rubber fader. We recommend the following set: Chroma Caps fit perfectly on the Numark Mixdeck Quad, but the Faders can bottom out on the controller surface. This can be fixed by placing a piece of paper Numark Mixdeck Quad 24 9 4 between the fader and surface while installing the knobs to create a clearance between the surface and the rubber fader. We recommend the following set: Chroma Caps fit perfectly on the Numark Mixtrack! Numark Mixtrack 14 6 0 We recommend this set: Chroma Caps fit perfectly on the Numark Mixtrack II! Numark Mixtrack II 8 0 1 8 We recommend this set: Chroma Caps fit perfectly on the Numark Mixtrack Numark Mixtrack Platinum 11 5 2 2 Platinum! We recommend this set: Chroma Caps fit perfectly on the Numark Mixtrack Numark Mixtrack Pro 14 6 0 Pro! We recommend this set: Chroma Caps fit perfectly on the Numark Mixtrack Pro Numark Mixtrack Pro 3 11 5 2 1 2 3! We recommend this set: Chroma Caps fit perfectly on the Numark Mixtrack Pro Numark Mixtrack Pro II 8 0 0 1 8 II! We recommend this set: Chroma Caps fit perfectly on the Numark Mixtrack Numark Mixtrack Quad 15 7 1 8 Quad! We recommend this set: Chroma Caps fit perfectly on the Numark N4! We Numark N4 20 7 1 8 recommend this set: Chroma Caps fit perfectly on the Numark NS6! We Numark NS6 18 9 3 recommend this set: Chroma Caps fit perfectly on the Numark NS7! We Numark NS7 10 3 recommend this set: Chroma Caps fit perfectly on the Numark NS7II! We Numark NS7II 22 7 4 1 recommend this set: Numark NV II 22 4 4 Chroma Cap knobs fit the NV II, Faders do not fit Chroma Cap Encoders and Fader MK2's fit well Numark V7 2 1 on the V7! We recommend this set: Chroma Cap Fader MK2's fit the Numark Scratch. Numark Scratch 3 Knobs do not fit. We recommend this set:

Browse encoders fit but are smaller than stock Pioneer DDJ-1000 25 5 4 0 knobs, MK2 Faders don't fit the crossfader and pitch controls. Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

Browse encoders fit but are smaller than stock Pioneer DDJ-1000SRT 25 5 4 0 knobs, MK2 Faders don't fit the crossfader and pitch controls.

Chroma Caps fit perfectly on the Pioneer DDJ- Pioneer DDJ-200 8 3 200! We recommend this set:

Chroma Caps fit perfectly on the Pioneer DDJ-400! Pioneer DDJ-400 14 5 0 We recommend this set:

Chroma Caps fit well on the DDJ-800! Fader Pioneer DDJ-800 16 1 2 MK2's only fit channel faders and not the crossfader. Recommended set includes channel and Pioneer DDJ-RB 14 0 crossfaders. Tempo faders can be replaced but will rock back and forth. Chroma Caps fit perfectly on the Pioneer DDJ-RR! We Pioneer DDJ-RR 20 5 2 recommend this set: Chroma Caps fit perfectly on the Pioneer DDJ-RX! We Pioneer DDJ-RX 29 8 0 2 recommend this set: Chroma Caps fit perfectly on the Pioneer DDJ-RZ! We Pioneer DDJ-RZ 43 7 0 2 recommend this set: Chroma Caps fit perfectly on the Pioneer DDJ- Pioneer DDJ-RZX 43 6 0 2 RZX (except the crossfader). We recommend the following set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

Chroma Caps fit perfectly on the Pioneer DDJ-SB! We Pioneer DDJ-SB 13 5 3 recommend this set:

Pioneer DDJ-SB2 15 3 0 0 0 Faders fit everything except pitch faders.

Pioneer DDJ-SB3 14 3 0 Faders fit everything except pitch faders.

Chroma Caps fit perfectly on the Pioneer DDJ-SP1! Pioneer DDJ-SP1 6 1 0 2 We recommend this set: Chroma Caps fit great on the Pioneer DDJ-SR, Pioneer DDJ-SR 21 5 0 0 the crossfader may rub. Chroma Caps fit perfectly on the Pioneer DDJ-SR2! Pioneer DDJ-SR2 20 5 0 2 We recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

The top center encoder knob fits but is smaller Pioneer DDJ-SX 29 8 0 2 than the stock knob.

Chroma Caps fit perfectly on the Pioneer DDJ-SX2! Pioneer DDJ-SX2 29 8 0 2 We recommend this set:

Chroma Caps fit perfectly on the Pioneer DDJ-SX3! Pioneer DDJ-SX3 25 6 2 We recommend this set:

Chroma Caps fit perfectly on the Pioneer DDJ-SZ, Pioneer DDJ-SZ 43 5 0 2 except for the tempo faders. We recommend the following set: Super Knobs fit perfectly, Faders fit in the middle Pioneer DDJ-SZ2 43 5 0 0 section only, thin encoders fit too loosely on the "beats" knob Chroma Caps fit perfectly on the Pioneer DDJ-T1! We Pioneer DDJ-T1 33 7 1 2 recommend this set: Chroma Caps fit perfectly on the Pioneer DDJ- Pioneer DDJ-WeGO 10 5 2 WeGO, Faders also fit but can wobble a bit when rotated laterally. we recommend the following set: Chroma Caps fit perfectly on the Pioneer DJM-2000! Pioneer DJM-2000 20 5 We recommend this set: Chroma Caps fit perfectly on the Pioneer DJM-2000 Pioneer DJM-2000 Nexus 20 5 Nexus! We recommend this set: Chroma Caps fit perfectly on the Pioneer DJM-250! Pioneer DJM-250 12 3 2 We recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

Chroma Caps fit perfectly on the Pioneer DJM-400! Pioneer DJM-400 14 3 We recommend this set:

270° Super Knobs are used on the Trim and Aux/Mic Pioneer DJM-450 12 4 3 0 1 Level knobs, 0° replace the rest of the knobs on this unit. Chroma Caps fit perfectly on the Pioneer DJM-700! Pioneer DJM-700 16 5 We recommend this set:

Chroma Caps fit perfectly on the Pioneer DJM-750! Pioneer DJM-750 18 5 1 We recommend this set:

Chroma Caps fit perfectly on the Pioneer DJM- Pioneer DJM-750MK2 1 20 5 5 0 1 750MK2! We recommend this set:

Chroma Caps fit perfectly on the Pioneer DJM-800! Pioneer DJM-800 22 5 1 We recommend this set: Chroma Caps fit perfectly on the Pioneer DJM-850! Pioneer DJM-850 16 5 1 We recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

Chroma Caps fit perfectly on the Pioneer DJM- Pioneer DJM-900NXS 26 5 1 900NXS! We recommend this set:

Chroma Caps fit perfectly on the Pioneer DJM- Pioneer DJM-900NXS2 24 5 0 1 900NXS2! We recommend this set:

Chroma knobs fit the S9 great. Our faders do not Pioneer DJM-S9 13 2 fit.

Chroma Caps fit perfectly on the Pioneer DJM-T1! We Pioneer DJM-T1 21 3 1 2 recommend this set: 90° Super Knobs fit great and snug on the Pioneer Pioneer SVM-1000 18 SVM-1000 mixer Chroma Caps fit perfectly on the Pioneer TORAIZ SP- Pioneer TORAIZ SP-16 5 1 6 16! We recommend this set: Super Knobs and Fatty Knobs fit great on the Pioneer XDJ-R1 15 5 4 6 XDJ-R1! Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

Chroma Caps fit perfectly on the Pioneer XDJ-RX! We Pioneer XDJ-RX 13 8 5 1 recommend this set:

Chroma Caps fit perfectly on the Pioneer XDJ-RR! We Pioneer XDJ-RR 15 3 3 recommend this set:

The RX2's crossfader is not compatible with Pioneer XDJ-RX2 17 6 4 1 Chroma faders. Besides that, they work. We recommend this set:

Chroma Caps fit well on the Rane 62, the knobs and faders sit a little high off the mixer top surface but this Rane 62 26 0 0 5 is only noticable from a side view. We recommend the following set: Rane 64 30 4 5 5 Chroma Caps fit on the Rane 64 except the crossfader. Chroma Caps fit well on the Rane 68, the knobs sit a bit high off the mixer top surface but this is only Rane 68 24 5 4 noticable from a side view. The fader caps fit on the line faders but not on the cross fader. We recommend the following set: Chroma Caps fit perfectly on the Rane Empath! We Rane Empath 23 3 3 recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes

Chroma Caps fit perfectly on the Rane Seventy-Two! Rane Seventy-Two 22 3 4 We recommend this set:

Chroma Caps fit perfectly on the Rane TTM-56S! We Rane TTM-56S 17 3 recommend this set: Chroma Caps fit perfectly on the Rane TTM-57 MKII! Rane TTM-57 MKII 20 3 6 We recommend this set: Rane TTM-57SL 20 3 2 Chroma Caps fit great on the Rane TTM-57 MKII! Chroma Caps fit perfectly on the Reloop Mixtour! We Reloop Mixtour 8 2 recommend this set: Chroma Caps fit perfectly on the Reloop Terminal Mix Reloop Terminal Mix 2 18 4 6 2! We recommend this set: Chroma Caps fit well on the Reloop Terminal Mix 4, Reloop Terminal Mix 4 29 7 4 6 the faders sit a little low and may contact the top plate surface. We recommend the following set: Chroma Caps fit well on the Reloop Terminal Mix 8, Reloop Terminal Mix 8 29 7 4 2 the faders sit a little low and may contact the top plate surface. We recommend the following set:

Chroma Caps fit perfectly on the Reloop Elite, but the stock knobs are on very snug and are also Reloop Elite 10 6 2 5 recessed, which requires a little bit of pressure to get on and off.

Chroma Caps fit perfectly on the Roland AIRA MX-1! Roland AIRA MX-1 16 1 We recommend this set: Chroma Caps fit perfectly on the Roland AIRA System Roland AIRA System 1 36 1! We recommend this set: Super Knobs fit perfectly on the Roland AIRA TB-3! Roland AIRA TB-3 5 We recommend this set: Chroma Caps fit perfectly on the Roland AIRA Roland AIRA TR-8 38 TR-8 knobs (the faders are too tiny) - we recommend the following set: Chroma Caps fit perfectly on the Roland AIRA VT-3 Roland AIRA VT-3 2 knobs, we recommend the following set: Chroma Caps fit perfectly on the Roland DJ-202! We Roland DJ-202 12 3 recommend this set: Chroma Caps fit perfectly on the Roland DJ-505! We Roland DJ-505 24 5 4 recommend this set: Chroma Caps fit perfectly on the Roland DJ-707M! Roland DJ-707M 31 7 4 3 We recommend this set: Chroma Caps fit perfectly on the Roland DJ-808! We Roland DJ-808 38 8 1 3 recommend this set: Device Super Knob Super Knob 90° Super Knob 0° Super Knob 270° Fader MK2 Fatty Knob Encoder Thin Encoder Notes Chroma Caps fit perfectly on the Roland SP-404 and Roland SP-404/404SX 0 4 SP-404SX, we recommend the following set: Chroma Caps fit on the Console 1 but sit slightly Softube Console 1 26 0 higher above the faceplate than the stock knobs do. Chroma Caps fit perfectly on the Teenage Engineering Teenage Engineering OP-1 1 4 OP-1, we recommend the following set: Chroma Caps fit perfectly on the Vestax VCI-100! We Vestax VCI-100 12 5 2 recommend this set: Chroma Caps fit well on the Vestax VCI-300, the knobs may bottom out on surface on controller; however, this is fixable by placing a piece of paper Vestax VCI-300 11 5 0 between the controller surface and the knob when installing to create a clearance. We recommend the following set: Chroma Caps fit perfectly on the Vestax VCI-380! We Vestax VCI-380 11 3 0 recommend this set: Chroma Caps fit perfectly on the Vestax VCI-400! We Vestax VCI-400 23 7 0 7 recommend this set: The knobs and encoders fit perfectly on the Vestax VCI-400SE Ean Golden Edition. The Vestax VCI-400SE Ean Golden Edition 23 7 0 7 faders sit slightly lower than the originals and can make minor marks on your controller. We recommend the following set: Chroma Caps fit perfectly on the Vestax VCM-600! Vestax VCM-600 54 11 8 We recommend this set: