Software Announcement March 9, 1999



CATIA/CADAM AEC Plant and Shipbuilding Solutions Version 4 Release 2.1 — Enhancements Support Intelligent Virtual Plant Data Modeling

Overview • CATIA/CADAM APS Tooling Structures Design Configuration At a Glance The product portfolio of (5626-PTD) brings together the CATIA/CADAM AEC Plant and key applications needed to design New and enhanced products and Shipbuilding Solutions Version 4 has and analyze the structural configurations in Release 2.1 add been enhanced with a new frameworks used in new function to CATIA/AEC Plant generation of products that supports manufacturing and tooling. and Shipbuilding Solutions for intelligent virtual plant data handling engineering data based • CATIA/CADAM APS Digital modeling for design, procurement, on intelligent plant data modeling: Manufacturing Plant Configuration and construction, to operations and (5626-PMD) functionality has been • maintenance of process and power CATIA/CADAM AEC Conveyor expanded to include the — plants. Release 2.1 introduces two Design facilitates preliminary CATIA/CADAM AEC Conveyor new products, two new and detail design phase of Design Product (5626-ACD). configurations, ten enhanced conveyor systems products and one enriched Also announced today is the • CATIA/CADAM AEC STEP configuration. availability of CATIA Version 5 — AP227 Interface product — Next Generation Scalable ensures full STEP compliance What′s New Applications. This new software of the CATIA/CADAM Plant • CATIA/CADAM AEC Conveyor complements the CATIA Version 4 Applications Design product (5626-ACD), an product line, which continues to be • enhanced. For related information CATIA/CADAM APS Conveyor end-to-end process, improves — on CATIA Version 5, refer to Design Configuration productivity by eliminating provides the essential manual steps and by allowing the Software Announcement 299-060, ′ dated March 9, 1999. applications and full conveyor conveyor s design to be layout and related equipment integrated into the overall digital modeling design of the plant in which it will Key Prerequisites be used. • CATIA/CADAM APS Tooling Version 4, Release 2.1 runs on • Structure Design CATIA/CADAM AEC STEP AP227 selected system levels of: Configuration — groups key Interface product (5626-ST2) is applications needed to design •  the first of a STEP-complaint AIX and analyze the structural family of products that allows • Hewlett-Packard HP-UX • frameworks used in CATIA to exchange process plant Silicon Graphics IRIX manufacturing and tooling information in the format as • Sun Microsystems Solaris defined by the AP227 application • CATIA/CADAM APS Digital protocol. Manufacturing Plant — • Planned Availability Date Configuration now includes CATIA/CADAM APS Conveyor CATIA/CADAM AEC Conveyor Design Configuration (5626-PCD) March 12, 1999 Design Product provides all the essential applications needed for full conveyor layout and related EXTRA! EXTRA! . . . equipment modeling. Subscribe to IBM iSource, your electronic source for customized IBM information! Go to our Web site at http://www.ibm.com/isource or send an e-mail to [email protected] with the word SUBSCRIBE in the body.

This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com.

IBM United States IBM is a registered trademark of International Business Machines Corporation. 299-063 “intelligent” 3D arrangement. The arrangement includes Description the conveyor type, all the attributes, connectivity, and relationships to other objects in the 3D models. The CATIA/CADAM AEC Plant and Shipbuilding Solutions product comes complete with a full suite of editing tools (CATIA/CADAM Plant) provides “process centric” for managing the layout as well as an automatic function solutions. An object-oriented plant model that will have to create the conveyor layout as a track in the Fitting a fundamental effect on the way engineering and design Simulation (5626-FIT) product. data is used throughout the life cycle of the plant, from design, procurement and construction, to operations and End-user tools allow incorporation of customer-specific maintenance. calculations, such as chain-pull calculations, cost estimation, and carrier counts. For owners and operatiors of process and power plants, this means bringing new products to market faster, Customers seeking to design the internal functions of achieving consistent, high-quality production at the lowest conveyor equipment should also look at the CATIA cost while meeting regulatory requirements. Equipment and Systems Engineering Solutions and the CATIA Mechanical Design Solutions. For engineering and construction firms, it means capitalizing on key know-how to win projects that are CATIA/CADAM AEC STEP AP227 Interface Product delivered on time, within cost, and to the highest quality (5626-ST2) while returning a profit. • Allows for the exchange of data using the standard For shipbuilders, it means end-to-end design and neutral file format called “STEP”. Within this standard, manufacturing of the hull, decks, piece parts and support the STEP AP227 Interface product allows exchange of systems like structural, piping, equipment, HVAC and spatial information of a process plant as defined in the electrical raceways. Thus shipbuilders and their AP227 Application protocol. supporting crafts and suppliers now have a common • Consists of two utilities: integrated base for design, configuration management, manufacturing, commissioning, and − CATST2 (CATIA to STEP) operations/maintenance. − ST2CAT (STEP to CATIA)

New Products With these utilities, the user can perform the following tasks: CATIA/CADAM AEC Conveyor Design (5626-ACD) − Create a STEP physical file from a CATIA model − Create a CATIA model from a STEP physical file • Facilitates both the preliminary design and detail design phases of conveyor systems. In preliminary • Supports a subset of the Conformance Class 2 design, automatic bills of materials and costs described in the DIS version of AP227 document. For generated by the Conveyor Design product allow each unit of functionality (UoF) included in this accurate estimates of the project. During detail Conformance Class, the support is the following: design, Conveyor Design′s advanced modeling capabilities help ensure an error free design and − Piping_system_functional_characterization: accurate construction drawings. support of piping line • Integrates with the plant modeling applications of the − Plant_item_characterization: support of HVAC, CATIA/CADAM AEC Plant Solutions (CATIA/CADAM Structure, Equipment and piping components Plant). It is ideally suited to the model representations − Piping_component_characterization: full support; (both geometric and specification) of conveyors found connector: full support; connection: full support in manufacturing plants, shipbuilding facilities, and except connection definition; shape: full support materials handling facilities. Examples of such except interference; csg_and_b_rep_geometry: conveyors include power and free, belt conveyors, and support limited to piping primitives and Boolean roller conveyors. results • Integrates with the QUeueing Event Simulation Tool (QUEST) product offered by Deneb Robotics, a New Configurations Dassault Systemes company, to allow detailed throughput simulation of the conveyor system after it CATIA/CADAM APS Conveyor Design Configuration has been modeled in CATIA/CADAM AEC Conveyor (5626-PCD) Design. This capability integrates company work processes, thus eliminating the need for the manual • Provides the essential applications needed for full tracing that is currently done between the conveyor conveyor layout and related equipment modeling. detail design and conveyor event simulation and Designers can quickly route conveyors, define and timing phases. place support equipment like motors, chain turn-arounds, track switches and model production • Provides a complete set of tools for creating equipment adjacent to the conveyor like robots or parametric conveyor component shapes and for material transferee machines. managing these shapes in libraries. Comprehensive attribute data is associated with the conveyor • Provides all the tools necessary to go from 2D and 3D components to allow their full specification within the conceptual layout, process design ending with detailed context of the overall conveyor design. This data may design. An interface to the QUEST discrete event also be contain information required for the QUEST simulator available from Deneb is also provided. simulation. CATIA/CADAM APS Tooling Structures Design Rapid initial layout of conveyor systems can be performed Configuration (5626-PTD) by importing the original AutoCAD or MicroStation • Brings together the key applications needed to design layouts via the DXF import facility. Once imported, tools and analyze the structural frameworks used in within the CATIA/CADAM AEC Conveyor Design product manufacturing and tooling. Engineers involved in will “follow” the layout and convert it into an

299-063 -2- designing, detailing and fabricating equipment • Provides management of Penetration Requests in platforms, fixtures, jigs, test cell frames, equipment design models. mounts or racks, maintenance and access ways, or • materials portioning frames will find this configuration Provides Mirror Transformation (copy/move) of particularly useful. 3D modeling and structural DuctWork elements. analysis applications insure precise, accurate and safe CATIA/CADAM AEC Piping Design (5626-APD) tooling structures while guaranteeing that the resulting frame meet ergonomic and functional needs and will • Provides P&ID 3D Integration in a not interfere with the tooling, equipment, assemblies Multi-Model environment. of the manufacturing process they support. • Allows flow management in design models. • Includes advanced structural analysis, equipment modeling with 3D libraries as well as automated • Allows dynamic definition of Face-to-Face dimension drafting. at part placement. • Provides Mirror transformation (copy/move) of piping Enhanced Products elements. • CATIA/CADAM AEC Drafting (5626-ADR) Provides management of Penetration Requests in design models. Enhancements to the Shipbuilding domain: CATIA/CADAM AEC Virtual Product Management • Full integration of ship objects within dedicated (5626-AVM) dimensioning part of software to allow an associative • dimension dress-up Provides Partial Put per lines or equipments: delivery in the DB of a subset of the workset′s content (subset • Better integration for object symbol representation, of lines/equipments). dimensioning system based on AEC objects • Adds a passive P&ID to a P&ID session by offsheet • Frame spacing generated in each view, through a selection. command based on the same reference than in 3D • design Provides performance enhancement (Get without connections). CATIA/CADAM AEC Drawing Production (5626-ADP) • Provides Multi-user batch to deliver data/refresh Enhancements to the Plant domain: working sessions in DB (sample). • • The Conveyor discipline has been integrated as a Provides AVM Public Catgeo API Delivery: specific discipline, which allows the setting of − Management of working Sessions at component dedicated graphical attributes by class of objects and level (worksets). provides for the associativity of the dress-up data as Annotation and Dimension. − Management of documents in DB. • Automatic generation of the Piping annotation takes − Direct access to database information (query, advantage of the clipping point to optimize the attributes, relations). annotation placement and avoid crowded text on the • Provides AVM integration within CATweb product: drawing (orthographic drawings with prism filters). CATweb online direct access/reporting on plant • Intersection curves can be generated as a separate components stored in the AVM DB (Web access in computation within the design model, where it is particular from low-cost PC stations). relevant, by launching a separate command that computes the intersecting curves when the design is CATIA/CADAM AEC Equipment Design (5626-EQT) more stable and computes the outside drawings • Provides definition of “Attribute/Dimension Table” to drop-off using drawing-type settings (for example, you quickly and easily define multiple variations of similar can compute your intersection curves at a preliminary equipment. step and then perform a drop-off with the same 3D option). • Replaces/updates equipment from equipment catalog. • Based on a new Piping design capability, a Flow • Provides equipment placement support for layers symbol is generated when pipes are extracted with standard and compact options. single line option. • Provides equipment symmetry/mirror operations. Enhancements to the Shipbuilding domain: CATIA/CADAM AEC Piping Isometrics Production • Symbols are extended to material continuity, material (5626-ISO) orientation, end-type symbol, and welding line. • Provides Show Flow direction as defined in the 3D • The following objects are now processed as separate Piping Design Models. objects: − Covers/collars CATIA/CADAM AEC Piping and Instrumentation Diagrams − Physical parts (5626-PID) − Curved profiles • Imports predefined Streams and Pipelines. CATIA/CADAM AEC Ductwork Design (5626-ADW) • Provides component placement support for layers • Projection routing, the user to select Planes to route standard and compact option. to when using the projection routing tool. • Allows the user to use SOLID geometry when defining the graphics of a part.

-3- 299-063 CATIA/CADAM AEC Ship Hull Design (5626-SHD) decrease the design and construction phases through parallel, collaborative work processes. • Provides Batch capability of updating all parts after Hull Form modification. The component-based approach on which CATIA/CADAM • Plant gives members of a multidisciplinary team Automates generation of symbols (for example, concurrent access to plant information while guaranteeing material throw orientation, material continuity and that no two people can change the same aspect of the profile end-types). same component at the same time. This offers • Handles Penetration Request across various unprecedented flexibility over the existing file-based CAD disciplines (Piping, HVAC, Structures). systems. • Creates Coamings and Faces on portion of part′s For those firms responsible for end-to-end design and free-edge as flame-burnt or profile parts. manufacturing of plants or ships or major components therein; CATIA/CADAM Plant Solutions are completely • Allows Parameterized Parts to be stored and retrieved integrated with CATIA mechanical design and for instanciation within the user′s model. manufacturing solutions including lathe machining, • Provides ease-of-use improvements. drilling, robotics, milling, sheetmetal, mold/die machining, and many others. CATIA/CADAM AEC Structural Frame Modeling (5626-STF) Hardware and Software Support Services • Extends the “/STRSOL” command in order to generate Linear and Planar Members as Exact Solids for Detail SmoothStart /Installation Services Design. • Records connections between Concrete Planar SmoothStart or Installation Services will not be provided Elements and Linear members, thus allowing for CATIA products. intersection lines to be generated when extracting drawings in CATIA ADP Product. Reference Information • Supports Multi Model Links (MML), thus enabling easier concurrent engineering on structural For additional information on this release of assemblies. CATIA/CADAM Solutions, refer to Software • Handles Penetration Request across various Announcement 299-062, dated March 9, 1999 disciplines (Piping, HVAC, Structures). (CATIA/CADAM Solutions Version 4 Release 2.1 for Workstations). • Allows to automatically create openings in Planar Members driven by interference checking with Linear Also visit the Internet CATIA/CADAM home page at the Members or Piping, HVAC elements or envelops of any following URL: equipments. http://www.catia.ibm.com • Extends “Infill” capabilities for more flexibility Trademarks (horizontal infill between two members with different sections, infill driven by one single linear member). SmoothStart is a trademark of International Business Machines Corporation in the United States or other countries • Provides Notching options directly from the attribute or both. panel for greater productivity notching/cut-back AIX is a registered trademark of International Business integration when updating structures. Machines Corporation in the United States or other countries • or both. Provides ease-of-use improvements (Modification of Other company, product, and service names may be Material orientation of a Planar, Relimitation of a trademarks or service marks of others. Planar by selecting geometrical elements).

Enriched Configuration

The Digital Manufacturing Plant Configuration (5626-PMD) has been enriched to include the AEC Conveyor Design Product (5626-ACD). Refer to the Supplemental Information section for details.

Year 2000

These products do not have date dependencies and are Year 2000 Ready.

Product Positioning

CATIA/CADAM AEC Plant and Shipbuilding Solutions offers solutions for the construction, petroleum, process, power, and shipbuilding industries, supporting design and operations of industrial plants across the entire life cycle. The first object-oriented system to support a wide range of integrated applications (P&IDs, piping, equipment, structures, and ductwork) for the design and modification of plants and ships, CATIA/CADAM Plant can dramatically

299-063 -4- IBM US Announcement Supplemental Information

March 9, 1999

CATIA/CADAM AEC Plant and Shipbuilding Third-Party Complementary Products: Dassault Products and Configurations Systemes collaborates with certain third-party software developers who want to develop and market products that ┌───────────────────────────────────────────────────┐ are complementary to CATIA/CADAM Solutions. │ CATIA/CADAM AEC PLANT and SHIPBUILDING SOLUTIONS │ ├──────┬────────────────────────────────────────────┤ • Georgia Institute of Technology, developer of │P │ │ GTSTRUDL, a computer-aided engineering system for │R │ │ finite element analysis and structural design, has │ O │ CONFIGURATIONS │ │D │ │ developed an interface between CATIA/CADAM Plant │U │ │ and GTSTRUDL. │ C ├──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┤ │ T │P │P │P │P │P │P │P │P │P │P │P │P │P │P │P │ • DVO, Gruppe Deutsche Babcock, has developed a DIN │ S │D │P │S │S │D │I │L │D │A │V │S │R │M │C │T │ catalog of piping parts. │ │B │D │D │A │G │P │D │D │I │M │H │D │D │D │D │ ├──────┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┤ • COADE Inc., (Houston, TX) has developed an interface │ COM │X │X │X │X │X │X │X │X │X │ │X │X │X │X │X │ between CATIA/CADAM Plant′s Piping Design │ LIB │X │X │X │X │X │X │X │X │X │ │X │X │X │X │X │ │ ABA │X │X │X │X │X │X │X │X │X │ │X │X │X │X │X │ application and CAESAR-II Pipe Stress Analysis │ ADR │X │X │X │X │X │X │X │X │X │ │X │X │X │X │X │ Software for the complete stress analysis of piping │ DXF │X │X │X │X │X │X │X │X │X │ │X │X │X │X │X │ systems. │ EQT │ │X │ │ │ │ │X │X │ │ │ │ │X │X │X │ │ APD │ │X │ │ │ │ │X │ │ │ │ │ │X │ │ │ │ STF │ │ │X │X │ │ │X │ │ │ │ │ │X │ │X │ │ STA │ │ │ │X │ │ │ │ │ │ │ │ │ │ │X │ Education Support │ ADP │ │ │ │ │X │ │ │ │ │ │ │ │ │ │X │ │ ISO │ │ │ │ │ │X │ │ │ │ │ │ │ │ │ │ │ SPA │ │ │ │ │ │ │X │ │ │ │ │ │X │ │ │ Call the IBM Engineering Technology Solutions/North │ ADW │ │ │ │ │ │ │X │X │ │ │ │ │X │ │ │ America (ETS/NA) response line at 800-395-3339 for │ PID │ │ │ │ │ │ │ │ │X │ │ │ │ │ │ │ schedules and enrollments. │ AVM │ │ │ │ │ │ │ │ │ │X │ │ │ │ │ │ │ CDR │ │ │ │ │ │ │ │ │ │X │ │ │ │ │ │ │ SHD │ │ │ │ │ │ │ │ │ │ │X │ │ │ │ │ │ DYS │X │X │X │X │X │X │X │X │X │ │X │X │X │X │X │ Technical Information │ ARW │ │ │ │ │ │ │X │ │ │ │ │X │X │ │ │ │ SPD │ │ │ │ │ │ │ │ │ │ │ │X │ │ │ │ │ FIT │ │ │ │ │ │ │ │ │ │ │ │ │X │ │ │ Specified Operating Environment │ N4D │ │ │ │ │ │ │ │ │ │ │ │ │X │ │ │ │ ACD │ │ │ │ │ │ │ │ │ │ │ │ │X │X │ │ └──────┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┘ Hardware Requirements Hardware Requirements in the AIX Environment CATIA Companion Products CATIA/CADAM Plant Solutions Version 4 Release 2.1 are • CATIA Object Manager (5626-COM) designed to operate with the Motif CATIA user interface: • CATIA Library (5626-LIB) • Processor Unit Requirements: • CATIA.CATIA/CADAM Hybrid Raster (5626-RAS) • CATIA.CATIA/CADAM Coupler (5626-CCC) Any RS/6000 supported under AIX Version 4.3.0, • CATIA Fitting Simulation (5626-FIT) 4.3.1, or 4.3.2, that is available on the date of • CATIA Image Design (5626-IMD) CATIA/CADAM Plant Version 4 planned availability, • CATIA Publishing (5626-PBG) provided the minimum requirements described below • CATIA Surface Design (5626-SUD) are met. • CATIA Visualization Studio (5626-VST) • CATIA Knowledge Engineering (5626-CKE) • Processor component and feature requirements: • CATIA Space Analysis (5626-SPA) − Real memory — Minimum 64 MB, although 128 MB • — CATIA Data Management Run Time (5626-CDR) of memory is strongly recommended for entry •  CATIA Solid Mock-up (5626-SOM ) solutions in a production environment. The real • CATIA 4D Navigator (5626-N4D) • memory requirement may be greater if large or CATIA Realistic Rendering (5626-REN) complex models are to be used. • CATIA DXF/DWG Interface (5626-DXF) • CATIA Ship Steelwork Design (5626-SHB) − Graphics Devices (adapters and processors) — one • CATIA Ship Steelwork Production (5626-SHP) of the following: • CATIA Conferencing Groupware (5626-CGW) • CATIA Systems Pathways Definition Product Notes (5626-SPD) 1. The minimum graphics device is dependent on the type of work being performed.

This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com.

IBM United States IBM is a registered trademark of International Business Machines Corporation. 299-063 2. Base feature numbers are provided for DASD requirements for CATIA/CADAM Plant are: reference. Select feature numbers, which apply in some cases, are not shown. − All installed products of CATIA/CADAM Plant: 600 MB. Refer to the Program Directory to − POWER GXT150 (feature number 2767) estimate disk space requirements for specific products and configurations. − POWER GXT150L (feature number 2660) − Usage and administration environment: up to  − POWER GXT150M (feature number 2650) 300 MB, depending on the features installed on the − POWER GXT150P (feature number 2648); for use administration site. with RS/6000 7020-40P and 7248-120 or 132 (43P) − Minimum Paging Space: 128 MB (the minimum − POWER GXT250P (feature number 2851) paging space must be at least twice the size of memory). − POWER GXT255P (feature number 2852); for a better graphic performance level on GXT255P, the Online documentation, provided in the FrameMaker use of AIX mode “ONLY8BIT=TRUE” is format and can be accessed directly from CD-ROM; no recommended disk space is required. − POWER GXT500 12-Bit (feature number 2644) (for Note: Disk space requirements can be optimized machines 41T, 41W, 42T, and 42W) when distributed in a network environment. − POWER GXT500D 24-Bit (feature number 2646) (for • Peripheral component and feature requirements: machines 41T, 41W, 42T, and 42W) − Three-button mouse (feature number 6041) or IBM − POWER GXT500P 12-Bit (feature number 2854) 5083 or 6093 Tablet and cursor (feature number 1511). − POWER GXT550P 24-Bit (feature number 2855) − An alphanumeric keyboard, from the range − POWER GXT800P 24-Bit (feature number 2853 or supported by graPHIGS; a specific keyboard may 2859) be required for national language support (for − POWER GXT800M 24-Bit (feature number 2850) example, the Japanese keyboard is required for Kanji support). − POWER GXT1000 Model 001 or 002 (machine type 7250-001 or 7250-002) − One display compatible with the graphics devices listed above (for example, a 6091 19-inch color). − POWER GXT3000P (feature number 2825) Note: As Motif CATIA requires several colormaps, the • Peripheral component and feature options: use of POWER GXT250 processor family may result in − Dials (IBM 6094 Model 010) can be used for local technicolor effects when using some CATIA features graphics transformations such as rotation, pan, and such as the color chooser. zoom. CATIA/CADAM Plant solutions also provide Other adapters are not supported by CATIA/CADAM access to these transformations through the use of Plant Version 4. Although CATIA Solutions Version 4 keyboard functions. might run with other adapters, incidents encountered − The Lighted Program Function Keyboard (IBM 6094 specific to other adapters will not be accepted for Model 020) can be used for CATIA/CADAM Plant analysis or correction. function selection. Users can also select − 4-mm tape drive, 8-mm tape drive, or CD-ROM CATIA/CADAM Plant functions using the IBM 5083 drive for program installation. or 6093 Tablet and cursor, or the three-button mouse. Installing CATIA/CADAM Plant for IBM RS/6000 requires an internal or external 2.3 GB 8-mm tape − Spaceball (IBM 6094 Model 030 or Model 040) for drive, 4-mm tape drive, or CD-ROM drive. These local graphics transformations, such as rotation, drives require a SCSI HighPerformance Input/ pan, and zoom. Output (I/O) Controller, either standard or an − Spacemouse (Magellan) for local graphics optional feature (depending on the RS/6000 model). transformations such as rotation, pan, and zoom. This equipment is required to install CATIA/CADAM − Dials, LPFK and Spaceball (optional) can be Plant. The product documentation explains how to attached to one of the following: install CATIA/CADAM Plant Version 4 on other network-connected RS/6000 machines after the -- Graphics Application Input Adapter (feature initial installation. number 2810) CD-ROM is required for the online CATIA -- RS/6000 serial ports documentation in the FrameMaker format. • CD-ROM drive installation or use of documentation in − Direct Access Storage: FrameMaker format. CATIA/CADAM Plant licensed programs and Optional online access to documentation in configurations, user data, and user programs can be FrameMaker format (from CD-ROM or disk) offers: stored on any internal or external direct access storage devices (DASD) supported by RS/6000. − Improved user productivity − Fast, easy access to documentation − Ability to add customer unique documentation (if on disk) − Access to documentation for all users

299-063 -2- • Locally-attached plotters Disk space requirements can be optimized when distributed in a network environment. CATIA/CADAM Plant solutions directly support IBM color pen plotters that are locally attached. Configuration Requirements CATIA/CADAM Plant can also be used with OEM ┌────────────────────────────────────────────┐ plotters (refer to the specific programming │ HP Workstation Processor Required │ requirements for more details). │ Graphics device adapter Required │ │ Color graphics display Required │ Configuration Requirements │ Keyboard Required │ │ 3─button mouse or Tablet Required │ ┌────────────────────────────────────────────┐ │ with cursor │ │ RS/6000 Required │ │ CD─ROM or tape drive Required │ │ Graphics device adapter Required │ └────────────────────────────────────────────┘ │ Color graphics display Required │ │ Keyboard Required │ │ 3─button mouse or Tablet Required │ • │ with cursor │ Required processor components and features │ CD─ROM or tape drive Required │ − └────────────────────────────────────────────┘ Graphics device adapter (one of the following): Note: The minimum graphics device is dependent Hardware Requirements in the HP Environment on the type of work being performed. -- CRX-24Z (A2603A or option #AQ9) CATIA/CADAM Plant operates with Motif CATIA user -- CRX-48Z (A2609 or option #AQA) interface: -- HCRX-8Z (option #AQH) • Processor unit requirements: Anu HP 9000 series 700 -- HCRX-24Z (option #AQJ) including J-Class, C-Class, and B-Class workstations -- Visualize-8 (option A4441A) supported under HP-UX 10.20 A.C.E., provided that the -- Visualize-24 (option A4442A) requirements described below are met. -- Visualize-48 (option A4244A) -- Visualize-48XP • Required processor components and features: -- Visualize FX2 − Real Memory: Minimum 64 MB. 128 MB of memory -- Visualize FX4 is strongly recommended for entry solutions in a -- Visualize FX6 production environment. The real memory requirement may be greater if large or complex • Peripheral Requirements: Two types of connector can models are to be used. be used for peripheral component: HP-HIL connector − 4-mm DAT tape drive, or CD-ROM drive is required or Serial connector. for program installation. This tape drive must be • Required components and features: compatible with HP 6400 Model 2000 (Read/Write 90 meter tapes). − Three-button mouse (A2839B or A2838A) or Graphics tablet (A4364A, A4365A, 46087C, 46088C, Installation of CATIA/CADAM Plant for HP 9000 46090C, or 46091C). workstations requires an internal or external 4-mm DAT tape drive or CD-ROM drive. The tape drive must − An alphanumeric keyboard; specific keyboard may be compatible with HP 6400 Model 2000 (Read/Write be required for National Language Support, for 90 meter tapes). example: the Japanese keyboard is required for Kanji support. This equipment is required to perform an initial installation of CATIA/CADAM Plant. Product − One display compatible with the graphics card documentation explains installation of CATIA/CADAM listed above Plant on other network-connected HP machines after • the initial installation with the drive. Optional features: − 9-Dial box (46085A or A4362A) can be used for local CD-ROM is required for the online CATIA documentation in the FrameMaker format. graphics transformations such as rotation, pan, and zoom. CATIA/CADAM Plant also provides access • Disk space: CATIA/CADAM Plant licensed programs to these transformations through the use of and configurations, user data and user programs may keyboard functions. be stored on any internal or external disk by HP 9000 machines. − The “32-Button box” (46086A or A4363A) can be used for CATIA function selection. Users can also Disk space requirements for CATIA/CADAM Plant are select CATIA functions using the HP Tablet (see approximately as follows: above for references), or the three-button mouse. − All installed products of CATIA/CADAM Plant: − Spaceball (A4360A) has the same purpose as Dials, 650 MB. Refer to Program Directory to estimate that is local graphics transformations such as disk space requirements for specific products and rotation, pan, and zoom. configurations. − Spacemouse (Magellan) has the same purpose as − Usage and administration environment: up to Dials, that is local graphics transformations such 300 MB depending on the features installed on the as rotation, pan, and zoom. administration site. Hardware Requirements in an SGI Environment − Minimum Swap Space: 128 MB CATIA/CADAM Plant Version 4 operates with the CATIA Online documentation is provided in the FrameMaker Motif user interface. format and may be accessed directly from CD-ROM (a viewer is delivered on the CD-ROM), and in this case, • Processor Requirements: Any Indy, O2, Indigo2, no disk space is required. Octane, Onyx, or Onyx2 workstations based on any

-3- 299-063 R4000, R4400, R4600, R5000, R8000, and R10000 • Required processor components and features: processor supported under IRIX 6.2, IRIX 6.3, or IRIX 6.4 or IRIX 6.5 provided that the following Graphics device adapter (one of the following): requirements are met: − Indy 24-Bit • Required processor components and features: − Indy XZ − XZ − Real Memory: A minimum of 64 MB of real memory − Elan are required; 128 MB of real memory are − Extreme recommended to run CATIA/CADAM Plant − XL Version 4 in a production environment. The real − Integrated graphic adapter on O2 workstations memory requirement may be greater if large or − RE (Reality Engine) complex models are to be used. − RE2 (Reality Engine) − Solid Impact, or SI/SE − An internal or external 4-mm DAT tape drive or − High Impact CD-ROM drive is required for program installation. − Supe Solid Impact, or SSI/SSE Installation of CATIA/CADAM Plant Version 4 for − Maximum Impact, MXI/MXE SGI workstations requires an internal or external − InfiniteReality 4-mm tape drive or CD-ROM drive. • Peripheral Requirements: This equipment is required to perform an initial − Required components and features: installation of CATIA/CADAM Plant Version 4. Product documentation explains installation of -- SGI three-button mouse or Graphics tablet CATIA/CADAM Plant Version 4 on other network-connected SGI workstations after the initial -- An alphanumeric keyboard. A specific keyboard installation with the drive. may be required for National Language Support, for example, the Japanese keyboard is required CD-ROM is required for the CATIA online for Kanji support. documentation in the FrameMaker format. -- One display compatible with the listed graphics − Disk space: CATIA Solutions Version 4 licensed cards programs and configurations, user data and user − Optional features: programs may be stored on any internal or external disk by the SGI workstation. -- The SGI “8-Dial box” may be used for local graphical transformations such as rotation, pan, Disk space requirements for CATIA Solutions and zoom. CATIA Solutions Version 4 also Version 4 are approximately as follows: provides access to these transformations -- All installed products of CATIA Solutions through the use of keyboard functions. Version 4: 700 MB -- The SGI “32-Button box” may be used for CATIA Refer to the Program Directory to estimate disk function selection. Users may also select CATIA space requirements for specific products and functions using the Graphics tablet, or the configurations. three-button mouse. -- Spaceball has the same purpose as Dials. It -- Usage and administration environment: up to 400 MB depending on features installed on the provides local graphical transformations such administration site as rotation, pan, and zoom. -- Spacemouse (Magellan) has the same purpose -- Minimum Swap Space: 128 MB as Dials. It provides local graphical Online documentation is provided in the transformations such as rotation, pan, and FrameMaker format and may be accessed zoom. directly from CD-ROM (a viewer is delivered on the CD-ROM), and in this case, no disk space is Hardware Requirements in a SUN Environment required. CATIA/CADAM Plant Version 4 operates with CATIA Motif Note: Disk space requirements can be user interface. optimized when distributed in a network • Processor Requirements: Any Sparc Station 20 environment. Model 71, Ultra 1 Creator3D, Ultra 2 Creator3D, Configuration Requirements Ultra10 Creator3D SeriesIII or Ultra30 Creator3D or Ultra60 Creator3D Series III/Elite3D, supported under ┌────────────────────────────────────────────┐ Solaris 2.6.0 (also called SunOS 5.6.0), provided that │ SGI Workstation Processor Required │ the requirements described below are met. │ Graphics card Required │ │ Color graphics display Required │ • Required processor components and features: │ Keyboard Required │ │ 3─button mouse or Required │ − Real Memory: A minimum of 64 MB of real memory │ Graphics Tablet │ │ CD─ROM or tape drive Required │ are required; 128 MB or real memory are └────────────────────────────────────────────┘ recommended to run CATIA/CADAM Plant Version 4 in production environment. The real memory requirement can be greater if large or complex models are to be used.

299-063 -4- − An internal or external 4-mm DAT tape drive, or − Creator3D SeriesIII for Ultra10 or Ultra60 CD-ROM drive is required for program installation. workstations The tape drive must be compatible with SUN model: − Elite3D M3 or M6 for Ultra60 workstations only

-- For UltraSPARC Creator3D workstations, 5 GB • Peripheral requirements 4-mm 68-68 pins SCSI (ref X6251A). • Required components and features: -- For Sparc Station 20, 5 GB 4-mm 68-68 pins SCSI (ref X6252A). SUN three-button mouse or IBM 5083 or 6093 tablet and cursor: The CD-ROM drive must be compatible with SUN − IBM 74F3130 Cursor Pad Tablet — 8.144-inch x model: 10.44-inch -- For UltraSPARC Creator3D workstations, − IBM 74F3131 four-button cursor internal CD ROM (ref X6153A) or external CD-ROM (ref X6151A). − IBM 74F3143 Serial cable — 25-pin “D” type connector -- For Sparc Station 20, internal CD-ROM (ref X578A) or external CD-ROM (ref X6152A). − One of the following three:

Installation of CATIA/CADAM Plant Version 4 for -- IBM 6247468 Power supply — 120 V AC (U.S.) SUN workstation requires an internal or external -- IBM 74F3089 Power supply — 100 V AC 4-mm tape drive or CD-ROM drive. -- IBM 6247469 Power supply — 220/240 V AC This equipment is required to perform an initial − Generic Serial portgender adapter 25 pin “D” type installation of CATIA/CADAM Plant Version 4. connector, male-to-male, all connections straight Product documentation explains installation of through. CATIA/CADAM Plant Version 4 on other − Sun X985A Serial port splitter cable (This is only network-connected SUN machines after the initial needed if the system is a SPARCstation 20 and the installation with tape drive. single 25 pin serial connector is already in use). CD-ROM is required for the online − An alphanumeric keyboard. Specific keyboard may CATIA-documentation in the FrameMaker format. be required for National Language Support, for − Disk space: CATIA/CADAM Plant Version 4 example: the Japanese keyboard is required for licensed programs and configurations, user data Kanji support. and user programs can be stored on any internal − One display compatible with the graphics card or external disk by the SUN machines. listed above. Disk space requirements for CATIA/CADAM Plant Optional Features Version 4 are approximately as follows: • SUN 8-Dial box (ref X190AV4) can be used for local -- All installed products of CATIA/CADAM Plant graphical transformations such as rotation, pan, and Version 4: 650 MB zoom. CATIA Solutions Version 4 also provides Refer to the Program Directory to estimate disk access to these transformations through the use of space requirements for specific products and keyboard functions. configurations. • The SUN “32-Button box” (ref X180AV4) can be used -- Usage environment and administration for CATIA function selection. Users can also select environment: up to 300 MB depending on CATIA functions using the Tablet (see above for features installed on the administration site. references), or the three-button mouse. • -- Minimum Swap Space: 128 MB Spaceball has the same purpose as Dials. It provides local graphical transformations such as rotation, pan, Online documentation is provided in and zoom. FrameMaker format and can be accessed • directly from CD-ROM (a viewer is delivered on Spacemouse (Magellan) has the same purpose as the CD-ROM), and in the case, no disk space is Dials. It provides local graphical transformations such required. as rotation, pan, and zoom. Configuration Requirements Software Requirements

┌────────────────────────────────────────────┐ Software Requirements in the AIX Environment │ SUN workstation Required │ │ Graphics card Required │ │ Color graphics display Required │ CATIA/CADAM Plant Solutions are designed to operate │ Keyboard Required │ with the following system software: │ 3─button mouse or Required │ │ Graphics Tablet │ − AIX Version 4 Release 3.0, Release 3.1, or │ CD─ROM or tape drive Required │ Release 3.2. └────────────────────────────────────────────┘ − XL FORTRAN Runtime Environment, Version 5.1.0 or Version 5.1.1 (5801-AAR-7070, (part number • Required processor components and features 04L2123)). Graphic device adapter (one of the following): − IBM C & C++ Complier for AIX, (5801-AAR-5270) (part number 04L3535) at a minimum level 3.6.2 for − ZX for Sparc Station 20 AIX 4.3.0. and minimum level 3.6.4 for AIX 4.3.1 or − Creator3D for Ultra 1 or Ultra 2 or Ultra30 AIX 4.3.2, is required to run CATIA Solutions Version 4.

-5- 299-063 A permanent license, if needed, must be purchased Software Requirements in the HP Environment for VisualAge C++ Professional for AIX, Version 4 (5765-D52, part number 30L8178), which CATIA/CADAM Plant solutions are designed to operate includes the new VisualAge incremental C++ with the following system software: compiler, IBM C and C++ batch compilers, V3.6.4. • HP-UX 10.20 A.C.E. (refer to RETAIN and/or CATIA Note: Refer to RETAIN and/or the CATIA/CADAM Plant Version 4 Release 2.1 Program Directory for the Version 4 Release 2.1 Program Directory for the appropriate patches to be applied). appropriate PTFs to be applied. • ANSI C++ (a C++) run-time environment (delivered with HP-UX 10.20 A.C.E.) Specific Software Requirements • Fortran run-time environment Plotter Support • CDE, Common Desktop environment; VUE desktop Plotting hardware implementation requires software environment is no longer supported drivers (and their prerequisites) to support the plotting • HP-PHIGS run-time environment functions provided in the CATIA.Object Manager (5626-COM). • PEX run-time environment For convenience, CATIA.Object Manager includes plotter • Powershade drivers for each of the following pen or electrostatic plotting languages: Notes • IBM-GL, which support is included in AIX • The ANSI C++ (a C++) run-time libraries are delivered with the operating system. • CalComp C9071 • The Fortran run-time environment required by CATIA • Hewlett-Packard: HP-GL/2 (Hewlett-Packard′s Graphics is delivered with the operating system. Language/2) • PEX run-time environment is delivered with the • OCE Graphics GPR50: VDF Plotting Routines for operating system. RS/6000 (program number 501400659)1 • Powershade is included when Graphics Adapter is • Versatec: VCGL (Versatec Color Graphics Language): ordered. Versatec Graphics Software (VGS) 2.0 for RS/60001 and VRF (Versatec Random Format): Versatec Specific Software Requirements Graphics Software (VGS) 2.0 for RS/60001 Plotter Support Plotters that use a different language will require installation of a plotter driver to support that language. Plotting hardware implementation requires software 1 Used to build the plotter driver, but not required at run time drivers (and their prerequisites) to support the plotting functions provided in the CATIA.Object Manager Note: In all cases, customers should contact the (5626-COM). appropriate plotter vendor for plotter connection and plotter support: For convenience, CATIA.Object Manager includes plotter drivers for each of the following pen or electrostatic DBCS Support: There is no support of DBCS. plotting languages: • IBM-GL Optional Software • CalComp C907 Supported Languages • Hewlett-Packard HP-GL/2 (Hewlett-Packard′s Graphics Customer-written programs developed using CATIA APIs Language) can be written in the following languages: • OCE Graphics GPR50: VDF Plotting Routines • C & C++ Complier for AIX (5801-AAR-5270) (part • Versatec: VCGL (Versatec Color Graphics Language): number 04L3535) at minimum level 3.6.2 for AIX 4.3.0 Versatec Graphics Software (VGS) 2.0 and VRF and minimum level 3.6.4 for AIX 4.3.1. or AIX 4.3.2 is (Versatec Random Format): Versatec Graphics required to run CATIA Solutions Version 4. A Software (VGS) 2.0 permanent license, if needed, must be purchased for VisualAge C++ Professional for AIX, Version 4 Plotters that use a different language will require (5765-D52, part number 30L8178) which includes the installation of a plotter driver to support that language. new VisualAge incremental C++ compiler, IBM C and C++ batch compilers, V3.6.4. Note: In all cases, customers should contact the appropriate plotter vendor connection and plotter • XL FORTRAN for AIX, Version 5.1.0 or Version 5.1.1 support. (5801-AAR-7069, (part number 04L2110)) DBCS Support: There is no support of DBCS. Note: The FORTRAN run-time environment is included in the FORTRAN compiler environment and does not need Optional Software to be ordered separately. Supported Languages Customer-written programs developed using CATIA APIs can be written in the following languages: • HP-UX C/ANSI C (B3899AA)

299-063 -6- • HP-UX FORTRAN/9000 (B3907AA) DBCS Support: There is no support of DBCS.

Linkage of executables using CATIA APIs (executables Optional Software linked with CATGEO command) requires the following product: Supported Languages • HP-UX ANSI C+ + (a C+ + product B3910BA) Customer-written programs developed using CATIA APIs Note: Executables created with CATIA APIs on levels can be written in the following languages: prior to CATIA • SGI MIPSpro C Complier, Version 7.2.1 • Solutions Version 4 Release 1.8, included, should be SGI MIPSpro FORTRAN 77 Compiler, Version 7.2.1 relinked with CATIA Solutions Version 4 Release 2.1 Note: For both FORTRAN and C, the supported procedures. Application Binary Interface is ABI o32. Software Requirements in the SGI Environment Software Requirements in the SUN Environment CATIA/CADAM Plant solutions are designed to operate CATIA/CADAM Plant solutions are designed to operate with the following system software: with the following system software: • 2 2 2 IRIX 6.2 , IRIX 6.3 , IRIX 6.4 or 6.5 • Solaris 2.6.03 • C, C++, Fortran run-time environment Version 7.2.1: • CDE 1.2 ( Common Desktop Environment ) Execution Environments for C, C++ and Fortran 77 are delivered with IDF and IDL (IRIS Development • FORTRAN 4.2 run time required by CATIA is delivered Foundations/IRIX Development Libraries); IDF and IDL with CATIA/CADAM Plant. are packaged with the IRIX Foundation (base operating • system) for IRIX 6.5. For IRIX 6.2, 6.3 and 6.4, IDF and SunPHIGS run time required by CATIA is delivered IDL are packaged with the compiler products. For with CATIA/CADAM Plant. existing users of IRIX 6.2, 6.3, and 6.4 who have not Note: The C + + Runtime Environment is delivered with licensed a copy of IDO, an IDF CD and the IDL CD can the operating system. be ordered free of charge by calling 800-770-3033 (International 415-933-3033) or by sending a request 3 Refer to RETAIN and/or CATIA Version 4 Release 2.1 to [email protected]. Program Directory for the appropriate PTFs to be applied.

• Link-edit of applications based on CATIA API, or Specific Software Requirements installation of CATIA API Library (libgeo.a) requires IDO product (Iris Development Option). Plotters Support Note: IRIX system software delivers the C++ Run-time Plotting hardware implementation requires software and FORTRAN Run-time required by CATIA. drivers(and their prerequisites) to support the plotting functions provided in the CATIA.Object Manager 2 Refer to RETAIN or the CATIA Version 4 Release 2.1 (5626-COM). Program Directory for the appropriate PTF to be applied. For convenience, CATIA.Object Manager includes plotter Specific Software Requirements drivers for each of the following pen or electrostatic plotting languages: Plotter Support • IBM-GL Plotting hardware implementation requires software • CalComp C907 drivers(and their prerequisites) to support the plotting functions provided in the CATIA.Object Manager • Hewlett-Packard HP-GL/2 (Hewlett-Packard′s Graphics (5626-COM). Language/2) For convenience, CATIA.Object Manager includes plotter • OCE Graphics GPR50: VDF Plotting Routines drivers for each of the following pen or electrostatic • Versatec: VCGL (Versatec Color Graphics Language): plotting languages: Versatec Graphics Software (VGS) 2.0 and VRF • IBM-GL (Versatec Random Format): Versatec Graphics Software (VGS) 2.0 • CalComp C907 Plotters that use a different language will require • Hewlett-Packard: HP-GL/2 (Hewlett-Packard′s installation of a plotter driver to support that language. Graphics Language) • Note: Customer should contact the appropriate plotter OCE Graphics GPR50: VDF Plotting Routines vendor for plotter connection and plotter support. • Versatec: VCGL (Versatec Color Graphics Language): Versatec Graphics Software (VGS) 2.0 and VRF DBCS Support: There is no support of DBCS. (Versatec Random Format): Versatec Graphics Software (VGS) 2.0 Optional Software Plotters that use a different language will require Supported Languages installation of a plotter driver to support that language. Customer-written programs developed using CATIA APIs Note: In all cases, customers should contact the can be written in the following languages: appropriate plotter vendor for plotter connection and plotter support. • Sun WorkShop Compiler C 4.2 • Sun WorkShop Compiler FORTRAN 4.2

-7- 299-063 Optional Software for the UNIX Environment: CATIA Compatibility: Across all CATIA platforms, the CATIA can be run with either concurrent or nodelocked licensing: system provides consistent user interfaces, a fully The tool which supports this is LUM. Refer to the compatible model database and application programming Planning Information section for further details. interfaces, and the same advanced graphics interfaces. CATIA Solutions model data is fully compatible among the Specific Software for the UNIX Environment: Version 4 supported operating systems: AIX, HP-UX, IRIX, and Release 2.1 CATIA/CADAM APS Virtual Product Solaris. Management Add-On Configuration (5626-PVM) and CATIA/CADAM AEC Virtual Product Management Product Upward compatibility of CATIA model data is assured for (5626-AVM) support ORACLE and DB2 database all subsequent CATIA releases. Downward compatibility managements systems in a UNIX environment. Refer to of CATIA Solutions model data is also assured for entities Software Announcement 299-062, (CATIA Solutions which were not introduced at the higher version or Version 4 Release 2.1) dated March 9, 1999, for release-level. For example, CATIA Version 3 Release 2 requirements relative to CATIA.Data Management can read, but cannot process, guided cutting contact Runtime (5626-CDR), which is included in CATIA/CADAM driven operations introduced in this version. APS Virtual Product Management Add-On Configuration Because CATIA Version 4 Release 2.1 is not available for or prerequisite to CATIA/CADAM AEC Virtual Product OS/390 , modifications needed to guarantee Management Product. Note that for AIX, HP, and Solaris interoperability between CATIA′s OS/390 and workstation environments, DB2 Version 2.1.2 is the minimum versions will be made available through corrective recommended level. service to CATIA Version 4, Release 1.7, Refresh 5. Installability and Maintainability: On the workstations, The “transparent access” method allows enterprise the CATIA products are delivered either in the currently server users to access transparently CATIA models that used media or in CD-ROM, including the documentation. contain specific CATIA Version 4 Release 2.1 entities. Installability of CATIA/CADAM Solutions Version 4 is Performance Considerations: Performance and response designed so that customers can install the system, time are influenced by several factors including processor customize, and get started with few manual interventions and operating system, amount of system memory, and minimum skill within two hours. channel speeds, the number, type, and organization of For preventive service, new modification levels of CATIA terminals, and the size of the data being used. CATIA is are available two times per year. These new levels are designed for optimum benefit under all supported cumulative, containing all corrective and preventive operating systems. service available to date. Refreshes are also delivered every three months for the current modification level. Planning Information

Support for Workstation CATIA Version 4 Release 1.9 will Customer Responsibilities end when CATIA Version 4 Release 2.2 becomes available. Concurrent and Nodelocked Licensing CATIA Version 4 Release 1.8 for workstations is no longer supported, effective immediately. Running in a multi-user environment with IBM License Use Management (LUM): IBM LUM is available to The maintenance process remains unchanged for CATIA CATIA/CADAM Plant users whose installations include Version 4 Release 2.1. PTFs are delivered for severe multiple IBM, HP, SGI or SUN workstation machines problems only. CATIA Version 4 Release 1.9 and interconnected by a TCP/IP-supported Token-Ring or subsequent CATIA releases will be supported for at least Ethernet LAN, or for concurrent execution of CATIA 18 months after their planned availability date. programs on a single workstation. The following media is available for maintenance: CATIA for Unix Workstations uses LUM to control the number of licenses acquired for the program. Each • Refresh PTFs: CATIA/CADAM Plant license allows users, as identified by their user ID, to run simultaneously on a single − AIX: 4-mm, 8-mm, and CD-ROM machine and display up to five CATIA/CADAM Plant − HP-UX: 4-mm and CD-ROM processes. A process invokes license checking when it − SGI: 4-mm and CD-ROM invokes a CATIA/CADAM Plant interactive function, a − SUN: 4-mm and CD-ROM CATIA/CADAM Plant utility, or a CATGEO entry-point Note: Only the mechanical products are available on belonging to that product. For instance, with one license, CD-ROM. the user can run: If you need the AEC products, order the tape version • One interactive CATIA/CADAM Plant session in an AIX, of these PTFs. HP-UX, IRIX, or Solaris window • Single PTFs: CCSS permits the user to order single • Three batch utilities pertaining to the specified PTFs on CD-ROMs. Single PTFs will be available on licensed program, from an AIX, HP, IRIX, or Solaris the same media as refresh PTFs. In addition, the window CATIA AIX Single PTFs (and only the CATIA AIX PTFs) • One user batch program based on the CATGEO can be obtained from FIXDIST on the Internet at URL: Application Program Interface http://service.software.ibm.com/catia

299-063 -8- Using LUM administration facilities, system For technical assistance, visit the Electronic Customer administrators can configure CATIA/CADAM Plant Support Web page: products for workstations to permit users to access CATIA/CADAM Plant programs on one of the several IBM, http://service.software.ibm.com/catia HP, SGI, or SUN workstations. IBM LUM Runtime, Version 4.0 is required for AIX 4.3.0 and AIX 4.3.1, HP-UX, Packaging: The programs are available on the following IRIX, and Solaris licensed servers and clients. This level distribution medium for each operating system shown: of LUM can be dowloaded for free from the IBM software ┌───────┬────────┬─────┬─────┐ LUM download page at: │ │ │ │ │ │ │ CD─ROM │ 8─mm│ 4─mm│ http://www.software.ibm.com/is/lum/ │OS │ │ │ │ ├───────┼────────┼─────┼─────┤ IBM License Use Management Runtime, Version 4.5 is │ AIX │ X │ X │ X │ required for AIX 4.3.2 and is delivered with the operating ├───────┼────────┼─────┼─────┤ │ HP │ X │ │ X │ system. ├───────┼────────┼─────┼─────┤ │ SGI │ X │ │ X │ • Running in a Single User Environment without LUM ├───────┼────────┼─────┼─────┤ │ SUN │ X │ │ X │ In an installation without LUM CATIA for workstations, └───────┴────────┴─────┴─────┘ licensed programs may be licensed to operate on a single IBM, HP, SGI, or SUN machine. In this mode of operation, CATIA/CADAM Plant program use is Security, Auditability, and Control restricted to the workstation for which it is registered during the installation process, and only one user can The announced programs use the security and auditability run the CATIA/CADAM Plant licensed product at a features of the AIX operating system for the RS/6000 time; this user is limited to five processes running on family or similar features on the HP, SGI, and Sun the machine from the display. In any configuration, platforms. standalone or LAN, when more than one concurrent use of a CATIA/CADAM Plant licensed program is If sensitive data is sent over external communications desired on a single machine, LUM is required. facilities, user management may wish to pursue the use of cryptography. The customer is responsible for Note: For further information on IBM LUM, go to the IBM evaluation, selection, and implementation of security Software LUM download Web page at: features, administrative procedures, and appropriate http://www.software.ibm.com/is/lum controls in application systems and communication facilities. For use with IBM AIX, HP-UX, SGI IRIX, and SUN Solaris, IBM LUM is available for free from the following ftp site: Ordering Information ftp://ftp.software.ibm.com/software/lum • IBM LUM for AIX is also delivered as a standard New Licensees component of AIX 4.3. Orders for new licenses are accepted now. • Product usage keys issued for any CATIA Version 4 Release 1 level remain valid for CATIA Version 4 Shipment will begin on the planned availability date. Release 2.1. There is no need to request new keys for this release. • Orders that ship before the planned availability date will receive CATIA Solutions Version 4 Release 2.0. • IBM′s LUM is based on Isogon Corporation′s LicensePower/iFOR (iFOR/LS) technology. IBM′s LUM • Orders that ship after the planned availability date will is developed and supported by the IBM Software receive CATIA Solutions Version 4 Release 2.1. Development and Fulfillment Solutions organization in Rome, Italy. Isogon Corporation′s LicensePower/iFOR An order for CATIA basic licensed programs consists of remains consistent with IBM′s LUM. one or more licensed program orders (5626-xxx), and one System Program Order (SPO), 5628-ACA, for RS/6000, HP, Direct Customer Support: IBM provides telephone SGI, or SUN workstations. support for questions concerning the installation, use, and The 5626-XXX orders are required for billing and asset defects of CATIA products. Eligible customers can call the registration. The 5628-ACA orders are required to ship IBM Support Center at 800-237-5511 in the United States machine-readable materials and publications. or 800-426-2222 in Canada, 24 hours a day. Calls will be forwarded to the IBM CATIA/CADAM Technical Support Note: Only one media type can be specified on each SPO. Center for call-back between 8:00 am. and 8:00 pm., eastern time, during the business week, except for For existing CATIA products, ordering information holidays. remains unchanged. Internet support is provided on the World Wide Web. For help guides and information on education, visit the Engineering and Design Web page for service and support at: http://www.clearlake.ibm.com/MFG/engineering/ add.html

-9- 299-063 Basic License: To order a basic license for a 5626 first. For determining usage levels, ALC, and YLC program type, specify the program number (5626-xxx) and quantities cannot be combined. the feature number 9001 for asset registration. Specify the feature numbers as shown below. YLC Licenses: The YLC feature numbers specified will depend on the usage level ordered for the license for a CATIA/CADAM Products given customer number. The first license must be at usage level 1. The maximum number of licenses at a 4 5 6 PLC ALC YLC usage level must be ordered before ordering the next Feature Usage Feature Feature usage level. When licenses are discontinued, the licenses Number Level Quantity Number Number at the higher usage level must be discontinued first. For determining usage levels, ALC and YLC quantities cannot 0011 1 1 0006 0001 be combined. 2 2 to 10 0007 0002 3 11 to 40 0008 0003 System Program Order 4 41 to 100 0009 0004 5 101 + 0010 0005 5628-ACA System Program Order for RS/6000, HP, SGI, Note: For quantities exceeding 250, contact your or Sun: These programs will be shipped under the marketing representative for additional information. 5628-ACA SPO. The SPO is required for all program shipments and future updates. 4 Primary License Charge 5 Annual License Charge 6 Initial orders placed for a program type 5626 without a Yearly License Charge corresponding order or MES for the SPO (5628-ACA) will either fail order validation, or will not generate a Program Numbers for New Products and Configurations shipment of software or publications. The SPO is designated to the processor on which the program type Program 5626 is licensed. Each customer number and physical Product Name Number machine readable copy of the program must have its own SPO. CATIA/CADAM AEC STEP AP 227 Interface 5626-ST2 Product Initial Orders: When ordering the first 5626 program for CATIA/CADAM AEC Conveyor Design 5626-ACD a customer who does not already have CATIA Solutions Product Version 4 installed, an order must also be placed for the CATIA/CADAM APS Conveyor Design 5626-PCD SPO, 5628-ACA. Both the 5626 program order and the Configuration SPO must be for the same CPU system type/system CATIA/CADAM APS Tooling Structures 5626-PTD number, and have the same scheduled shipment date. Design Configuration To order an initial shipment, specify the SPO (5628-ACA) The following upgrade path is now available for customers and feature numbers, as required, from the following: with a PLC license for the CATIA.AEC Conveyor Design PRPQ (5799-ACD), to upgrade to the CATIA AEC Conveyor Feature Design Product (5626-ACD). Description Number

PLC to PLC Feature number for 5626-COM (This 1535 From Upgrade feature number must be specified CATIA Feature on the initial SPO order.) Version 4 To Number For media and media customization 34xx For the annual MRM process charge 01xx CATIA Conveyor CATIA Conveyor 0020 For “Softcopy Reference Publications” 7001 Design PRPQ Design Product on CD-ROM (5799-ACD) (5626-ACD) For “free” copies of specific 70xx publications Specify the feature numbers below with a quantity equal For “licensed documentation” 800x to the number of users: For asset registration 9001 For platform designation 535X Feature Workstation Platform Number Subsequent Licenses: The SPO must have a feature number for every CATIA Solutions program that is RS/6000 5350 installed or on-order, therefore, when a program that was HP 5351 not previously installed is ordered, the SPO must be SGI 5352 updated. SUN 5354 To Update an On-order System: When a license for a new First select the charge option, either PLC with the 5626 program is ordered for an on-order system, the corresponding quantity-based ALC or the quantity-based 5628-ACA must be updated to reflect the feature number YLC. of the licensed program desired. Also, for asset registration and billing purposes, an order for the PLC/ALC Licenses: Specify feature numbers for the PLC. individual licensed program type 5626 is required. Then specify feature numbers for the ALC. The feature number will depend on the usage level ordered for the To Update an Installed System: When a license for a new license for a given customer number. The first license 5626 program is ordered for an installed system, the 5628-ACA must be updated to reflect the feature number must be at usage level 1. The maximum number of of the licensed program desired. licenses at a usage level must be ordered before ordering the next usage level. When licenses are discontinued, the 5628-ACA Feature Numbers: The following feature licenses at the higher usage level must be discontinued numbers are used with the 5628-ACA System Program Order to show which programs and configurations are

299-063 -10- installed. This information is used for shipment of all occurrences of a given machine Type/Model number publications and media. The maximum quantity of each should be ordered on the same CPU serial number. of the features that may be specified is one for each of the 5626 programs. For feature numbers for previously The feature numbers for the previously announced announced programs, refer to: Version 4 products are unaffected by this announcement.

• Software Announcement 296-065, dated Basic Machine-Readable Material: To order, select the March 5, 1996 feature number of the desired distribution medium. • Software Announcement 296-407, dated When ordering the 5628-ACA SPO for RS/6000, HP, SGI, October 22, 1996 or Sun workstations, specify the appropriate Media • Software Announcement 297-199, dated June 10, 1997 Feature Number and the corresponding Annual MRM Process Charge Feature Number. These programs will • Software Announcement 297-473, dated be shipped under the 5628-ACA SPO. 5628-ACA is November 11, 1997 required for all program shipments and future updates. • Software Announcement 298-241, dated July 7, 1998 Annual MRM Feature Workstation Process Description Number Platform Media Charge (Operating Feature Distribution Feature CATIA/CADAM AEC STEP AP227 Interface 1570 System) Number Medium Number Product (5626-ST2) CATIA/CADAM AEC Conveyor Design 1718 RS/6000 3410 CD-ROM 0110 Product (5626-ACD) (AIX) 3407 8-mm tape 0130 CATIA/CADAM APS Conveyor Design 1719 3431 4-mm tape 0140 Configuration (5626-PCD) Hewlett-Packard 3414 4-mm tape 0160 CATIA/CADAM APS Tooling Structures 1721 (HP-UX) 3417 CD-ROM 0170 Design Configuration (5626-PTD) Silicon Graphics 3415 4-mm tape 0180 (IRIX) 3418 CD-ROM 0181 Examples of Ordering Sun 3419 4-mm tape 0182 (Solaris) 3420 CD-ROM 0183 Example 1: A customer wishing to order, on CD-ROM, quantity-based CATIA/CADAM APS Conveyor Design Note: Only one media type can be specified on each SPO. Configuration with 12 users on an RS/6000 would order the following: Customization Options: Select the appropriate feature numbers to customize your order to specify the delivery CATIA/CADAM APS Conveyor Design Configuration options desired. These features can be specified on the (5626-PCD) initial or MES orders.

Feature Example: If publications are not desired for the initial Description Quantity Number order, specify feature number 3470 to ship media only. For future updates, specify feature number 3480 to ship Asset Registration 9001 media updates only. If, in the future, publication updates RS/6000 Registration 12 5350 are required, order an MES to remove feature number PLC 12 0011 3480; then, the publications will ship with the next release ALC 1 0006 of the program. ALC 9 0007 ALC 2 0008 Feature Description Number Note: Configurator will automatically include the SPO 5628-ACA, feature number 3410 (for AIX CD-ROM) with a Initial Shipments quantity of one, and feature number 0110 (for annual MRM process charge) with a quantity of one. Serial Number Only (suppresses shipment 3444 of media and documentation) Example 2: The same customer wishes to add 30 users on the Sun platform. Ship Media Only (suppresses initial 3470 shipment of documentation) Order an MES to add features and change quantities of installed features. Ship Documentation Only (suppresses 3471 initial shipment of media) Feature Description Quantity Number Update Shipments Sun Registration Add 30 5354 Ship Media Updates Only (suppresses 3480 PLC Add 30 0011 update shipment of documentation) ALC Add 28 0008 ALC Add 2 0009 Ship Documentation Only (suppresses 3481 Note: Configurator will automatically include the SPO update shipment of media) 5628-ACA, feature number 3420 (for Solaris CD-ROM) with a quantity of one, and feature number 0183 (for annual Suppress Updates (suppresses update 3482 MRM process charge) with a quantity of one. shipment of media and documentation) The customer now has 42 PLC and 42 ALC on RS/6000 and SUN platforms. To receive the maximum ALC discount,

-11- 299-063 Feature The following Common Publications are supplied only on Description Number the CD-ROM:

Expedite Shipments Order Publication Title Number Local IBM Office Expedite 3445 (for IBM use only) CATIA Solutions Problem Determination SH52-0604 Guide Customer Expedite Process Charge 3446 CATIA Solutions Messages and Codes SH52-0612 ($30 charge for each product) CATIA Object Manager Interactive SH52-0630 Functions Reference Manual Expedite shipments will be processed to receive 72-hour CATIA Solutions Application Programming SH52-0631 delivery from the time IBM Software Manufacturing Interface Reference Manual Solutions (SMS) receives the order. SMS will then ship CATIA Object Manager Interactive User SH52-0633 the order via overnight air transportation. Access Commands CATIA Solutions Declaration Quick SH52-0858 Unlicensed Documentation: For CATIA/CADAM Plant Reference UNIX Workstation orders, certain printed product publications will be CATIA Solutions Interactive Functions SH52-0634 supplied in addition to memos, a program directory, and Reference Manual the basic machine-readable material. These publications CATIA Solutions Application Programming SH52-1225 consist of: Interface Online Index CATIA Solutions Interactive User Access SH52-1226 • Selected CATIA common publications Command Online Index • Selected CATIA/CADAM Plant publications pertaining CATIA Solutions Plotting and Printing SH52-1249 to the specific CATIA/CADAM Plant configurations User′s Guide UNIX Workstation and/or products ordered. CATIA Solutions Glossary SH52-1224 Each order, regardless of the number of individual The following is a list of entitled publications that will ship CATIA/CADAM AEC products ordered, will generate an with AEC products and configurations: order for the CATIA Solutions Version 4 Common Publications. Product Publication Product User Guides Trigrams Numbers The following CATIA Common Publications will be supplied in hardcopy format: Base and Drawing ABA SH52-1114 Generation Order Process Design APD, EQT, SH52-1121 Publication Title Number ISO, PID Structural Frame SAI, STA, STF SH52-1127 CATIA Solutions Installation Guide SH52-1189 Dynamic Sketcher ABA SH52-1095 UNIX Workstation Ductwork Design ADW SH52-1195 CATIA Solutions Product Enhancement SH52-1093 Virtual Product AVM SH52-1231 Overview Management CATIA Solutions Application Architecture SH52-0598 Ship Hull Design SHD SH52-7365 Overview Raceway Design ARW SH52-1298 CATIA Solutions Software Administration SH52-0601 Conveyor Design ACD SH52-1330 Guide UNIX Workstation CATIA Solutions Double-byte Character SH52-1108 Setup Publication Publication Set Fonts Administrator′s Guides Trigrams Numbers Motif CATIA Solutions User′s Guide SH52-0606 CATIA Solutions Application Programming SH52-0613 Base and Drawing ABA SH52-1115 Interface Quick Reference7 Generation CATIA Solutions Interactive User Access SH52-0614 Ductwork Design ADW SH52-1228 Command Quick Reference7 Process APD, EQT, SH52-1229 CATIA Object Manager Interactive User SH52-0611 ISO, PID Access Reference Manual Structures SAI, STA, STF SH52-1243 Virtual Product AVM SH52-1230 CATIA Solutions Data Administration SH52-0603 Management and Interoperability Guide Ship Hull Design SHD SH52-7366 CATIA Object Manager Utilities SH52-0632 Raceway Design ARW SH52-1297 User′s Guide Conveyor Design ACD SH52-1329 CATIA Solutions Installing Additional SH52-1223 Features UNIX Workstation Configuration Configuration Publication User′s Guides Trigrams Numbers 7 Not available on CD-ROM. Base and Drawing PAI, PDB, PDD SH52-1114 Generation PDG, PIP, PLD, PPD, PSA, PSD, PSH, PCD, PTD Process Design PAI, PIP, PLD, SH52-1121 PPD Structural Frame PLD, PSA, PSD, SH52-1127 PTD

299-063 -12- Configuration Configuration Publication No-Charge User′s Guides Trigrams Numbers Order Feature Publication Title Number Number Ductwork Design PDD, PLD SH52-1195 CATIA/CADAM AEC Ship Hull SH52-7365 7045 Dynamic Sketcher PAI, PDB, PDG, SH52-1095 Design User′s Guide PIP, PLD, PPD CATIA/CADAM AEC Ship Hull SH52-7366 7046 PSA, PSD, PDD, Design Setup PAI, PSH, PMD Administrator′s Guide CATIA/CADAM AEC Raceway SH52-1297 7050 Virtual Product PVM SH52-1231 Design Setup Management Administrator′s Guide Ship Hull Design PSH SH52-7365 CATIA/CADAM AEC Raceway SH52-1298 7051 Raceway Design PRD, PLD, PMD SH52-1298 Design User′s Guide Conveyor Design PMD SH52-1330 CATIA/CADAM AEC Conveyor SH52-1330 7056 Design User′s Guide Setup Configuration Publication CATIA/CADAM AEC Conveyor SH52-1329 7055 Administrator′s Guides Trigrams Numbers Design Setup Administrator′s Guide Base and Dwg PAI, PDB, PDD, SH52-1115 Generation PDG, PIP, PLD, Customers interested in a complete list of all PPD, PSA, PSD, CATIA/CADAM Plant IBM publications should ask their PSH, PCD, PTD IBM representative to print out the results of a IBM Ductwork Design PDD, PLD SH52-1228 PUBORDER search on the keyword CATIA or Process PAI, PIP, SH52-1229 CATIA/CADAM. PLD, PPD Structures PLD, PSA, SH52-1243 CATIA Online Documentation: CATIA Solutions provide PSD, PTD CATIA Solutions online documentation in Frame format, Virtual Product PVM SH52-1230 which is referred to as Softcopy Collection Kit. Management CATIA Solutions online documentation delivered in Frame Ship Hull Design PSH SH52-7366 format can be accessed through a Motif CATIA interactive Raceway Design PRD, PLD, PMD SH52-1297 session using Frame Viewer 5.5, or higher. Conveyor Design PMD SH52-1329 CATIA Solutions documentation in Frame format can be No-Charge Publications: Additional copies of the accessed outside of a CATIA interactive session using any CATIA/CADAM Plant publication can be ordered at initial of the FrameViewer operating environments (UNIX, order time by using the following no-charge feature Windows NT , Windows 95) numbers. Only one copy of each of the no-charge publications can be ordered per license: Softcopy Reference Publications: The Softcopy Collection Kit is shipped on CD-ROM (SK2T-5219), which contains No-Charge all the unlicensed manuals. The kit is part of the Order Feature machine-readable materials shipped with CATIA/CADAM Publication Title Number Number Plant. CATIA/CADAM AEC Base SH52-1114 7009 Subsequent updates (technical newsletters or revisions and Drawing Generation between releases) to the publications shipped with the User′s Guide product will be distributed to the user of record for as long CATIA/CADAM AEC Base SH52-1115 7010 as a license for this software remains in effect. A and Drawing Generation separate publication order or subscription is not needed. Setup Administrator′s NLS will be available at a later date. Guide CATIA/CADAM AEC Process SH52-1121 7011 Design User′s Guide Terms and Conditions CATIA/CADAM AEC Process SH52-1229 7026 Setup Administrator′s Licensing: IBM Customer Agreement Guide CATIA/CADAM AEC Structural SH52-1127 7012 Designated Machine: Not required Frame Modeling and Analysis User′s Guide Variable Charges Apply: No CATIA/CADAM AEC Structures SH52-1243 7032 Setup Administrator′s Installation License or Location License Applies: No Guide CATIA/CADAM AEC Ductwork SH52-1195 7019 Use Limitation Applies: Each license of a program or Design User′s Guide configuration authorizes a user to use a program or a CATIA/CADAM AEC Ductwork SH52-1228 7025 configuration on a single display terminal and processor Setup Administrator′s at a time. With a single license the user may initiate up Guide to five concurrent CATIA interactive sessions or batch CATIA/CADAM AEC Virtual SH52-1230 7034 sessions without requiring additional licenses. Product management Setup Administrator′s Guide Authorization to use a product or a configuration is CATIA/CADAM AEC Virtual SH52-1231 7033 controlled by a password mechanism within LUM, if Product Management User′s installed, or within CATIA itself. Guide

-13- 299-063 Refer to Optional Software in the Programming section for 1. Via CATIA/CADAM registered services on the additional information on operation with and without LUM. Internet A CATIA Solutions product requires a license for each of 2. Via IBMLink /SERVICELink Electronic Technical its CATIA prerequisite products. Response (ETR) for SoftwareXcel customers CATIA Solutions configurations have a single license and 3. Via telephone the functions within configuration cannot be shared. 4. Via paper APAR forms (G150-0180) Dynamic Licensing • Any maintenance created to correct defects An editable declaration file defines the list of products • Any enhancement or maintenance releases to the that must be acquired by each session and released upon licensed product its termination (Products declared as Required), and a list of products that can be acquired and released during the The following services are also provided: CATIA interactive session through the use of the new • interactive function “License”. Only users who acquired Telephone support for aid in resolving installation and licenses through the License interactive function can usage questions release those licenses. When no license for a product is Paper APARs and any APAR support material may be available, LUM command allows a requester to identify mailed to: signed-on users of this license. IBM Corporation The following rules apply: Engineering Solutions • Only licenses referenced in the declaration file may be 522 South Road P535 explicitly granted. Poughkeepsie, NY 12601 Attn: CATIA APAR Coordinator • Only licenses which are not prerequisites of other granted licenses may be explicitly released. The IBM Support Center, at 800-237-5511 in the United States and 800-426-2222 in Canada, will accept technical • A license referenced as Required in the declaration file questions concerning maintenance, defects, installation cannot be released. and usage of CATIA 24 hours a day. Callers will be asked to supply their IBM Customer Number, the name of the Three panels are displayed with the license interactive software package (CATIA) and their operating system. function: Incoming calls will be queued to the CATIA/CADAM • List of granted licenses that cannot be selected for Technical Support Center for “call back” response release (licenses referenced as Required in the between 8:00 a.m. and 8:00 p.m., eastern time during the declaration file along with their prerequisites). business week, excluding holidays. • List of granted licenses that can be selected for Internet support is provided on the World Wide Web. release, including their prerequisites, which, For help guides and information on education, go to the themselves, cannot be explicitly released. Note also Engineering and Design page for Service and Support: that the release of a license involves the release of each of its prerequisites when these prerequisites are http://www.clearlake.ibm.com/MFG/engineering/ not prerequisites of other granted licenses. add.html • List of non-granted licenses that can be selected for For technical assistance, go to the CATIA/CADAM granting (referenced as Optional or Dynamic in the Technical Support page: declaration file). http://service.software.ibm.com/catia Test Period: None Central Service, including a Technical Support Center, will Educational Allowance: Education Allowance does not be available until discontinued by IBM upon six months′ apply. However, Higher Education and Training (HEAT) is written notice. available to Education Allowance qualified customers. HESC has been discontinued for all CATIA V4 products. Support for Workstation CATIA Version 4 Release 1.9 will end when CATIA Version 4 Release 2.2 becomes Volume Discount: Contact your IBM representative. available. CATIA Version Version 4 Release 1.8 is no longer Version-to-Version Upgrade Credits Apply: No supported, effective immediately.

Warranted: Yes Support Line: IBM Support Center Licensed Program Materials Availability Charges • Restricted Materials of IBM: None • Non-Restricted Source Materials: None Contact your IBM representative for charges information • Object Code Only (OCO): All for this announcement. Program Services: Licensed customers are entitled to the YLC: This license charge is billed yearly in advance for following benefits: the use of a licensed program. Customers who pay a YLC • Continued use of the product for a licensed program receive enhancements and future releases, if any, at no additional charge. A prorated credit • Central Service, including a Technical Support Center, will be issued for the unused portion of the YLC in the for reporting defects to the licensed product will be event a licensed program is discontinued. provided for as long as available:

299-063 -14- PLC/ALC: Customers who pay a PLC and an ALC for a licensed program receive enhancements and future releases, if any, at no additional charge. Significant new functions may be offered as an optional feature and charged for separately. If a replacement program is announced and the customer elects to license the replacement program for a one-time or PLC/ALC and replace the prior program, an upgrade charge may apply. The first payment consists of the PLC and the ALC. The ALC applies yearly thereafter.

Process Charge: There is a one-time process charge to cover the cost of distributing the basic machine-readable material, including service updates.

Trademarks

RS/6000, GXT150L, GXT150M, GXT1000, and IBMLink are trademarks of International Business Machines Corporation in the United States or other countries or both. SOM, AIX, VisualAge, RETAIN, DB2, and OS/390 are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Windows is a trademark of Microsoft Corporation. Windows NT is a registered trademark of Microsoft Corporation. UNIX is a registered trademark in the United States and other countries exclusively through X/Open Company Limited. Other company, product, and service names may be trademarks or service marks of others.

-15- 299-063