Software Announcement March 9, 1999
CATIA/CADAM Solutions Version 4 Release 2.1 for Workstations Enhances Design-to-Manufacturing Integration and End-User Productivity
Overview Also announced today is the availability of CATIA Version 5 — At a Glance Release 2.1 continues to build on the Next Generation Scalable “process-centric” focus of Applications. This new software CATIA/CADAM Solutions Release 2.0 by offering: complements the CATIA Version 4 Version 4, Release 2.1 for product line, which continues to be Workstations • A new product for the Mechanical enhanced. For related information • Design Solutions composites on CATIA Version 5, refer to Enhances 21 current products, family Software Announcement 299-060, adds a generative tape design dated March 9, 1999. product to the composites • A new composites add-on product set, and adds a new configuration Key Prerequisites add-on configuration for • Enhancements to 21 other composites. Workstation Solutions products Version 4, Release 2.1 runs on • Expands support for selected system levels of: implementing “process-centric” The new and enhanced capabilities design-to-use concurrent provided by Release 2.1 further • AIX engineering methods. support CATIA′s commitment to • Hewlett-Packard HP-UX provide an integrated suite of • Silicon Graphics IRIX • Improves industry-specific concept-to-use products. • Sun Microsystems Solaris applications for optimizing • Microsoft Windows NT critical path processes. CATIA.Generative Composite Tape (CATIA/CADAM Drafting products Design (5626-GCT), the new only) • Improves end-user productivity composites family product, with ease-of-use enhancements. complements the current set of composites applications by providing Planned Availability Date EXTRA! EXTRA! . . . a set of tools for: Subscribe to IBM iSource, your electronic • March 12, 1999 source for customized IBM information! Tape course design Go to our Web site at • http://www.ibm.com/isource Analysis for both design and or send an e-mail to manufacturability [email protected] with the word SUBSCRIBE in the body. • Manufacturing quality control The new Tape Design product is combined with the enhanced Composites Covering (5626-COV) and Generative Composites Covering (5626-GCC) products to create the new Generative Composites Design Add-on Configuration (5626-GCD). This new configuration delivers an integrated design-to-manufacturing solution for all types of composite parts in a cost-effective package.
This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com.
IBM United States IBM is a registered trademark of International Business Machines Corporation. 299-062 Description Year 2000 These products do not have date dependencies and are While continuing to provide unique solutions for Year 2000 ready. integrated product development processes and teamwork optimization, CATIA Version 4 Release 2.1 enhances the product set for the mechanical and construction Hardware and Software Support Services industries. • It expands competitiveness and productivity in the SmoothStart /Installation Services advanced modeling, digital manufacturing, and plant design domains. SmoothStart or Installation Services will not be provided • For industries that design large industrial parts, such for CATIA products. as powertrains and plastic parts, this release optimizes system performance and productivity for part creation, modification, and analysis. Reference Information • Part tolerancing is enhanced to better address specific For information on the CATIA/CADAM AEC Plant and customer methodologies. Shipbuilding Solutions products, refer to Software • New types of tolerances are supported to control Announcement 299-063, dated March 9, 1999. surface roughness. Also, it is possible to transfer Additional information on CATIA/CADAM Solutions annotations (GD&Ts) included in CATIA drawings into Version 4 Products is also found on the Internet using the 3D tolerances with automated coherence checking. following URL: The ultimate goal is to help 2D design-centric customers http://www.catia.ibm.com to easily and safely migrate to a 3D process-centric approach. Trademarks
CATIA continues to improve its industry specialized SmoothStart is a trademark of International Business applications to optimize customers′ critical processes Machines Corporation in the United States or other countries from product creation to manufacturing. or both. AIX and SOM are registered trademarks of International • The CATIA Body in White Template (BWT) design Business Machines Corporation in the United States or other functions can now be used with multi-model countries or both. implementations, enabling the use of concurrent Microsoft is a trademark of Microsoft Corporation. engineering methods and the exploration of alternative Windows NT is a registered trademark of Microsoft designs. Corporation. Other company, product, and service names may be • An increased focus on downstream manufacturing trademarks or service marks of others. steps is also implemented, thanks to new flange excess features for aerospace sheetmetal components. • A new CATIA Generative Composite Tape Design (GCT) product is introduced to address an additional composite manufacturing process. Tape courses can be automatically located and controlled for quality in accordance with manufacturing and stress constraints and can then be flattened for manufacturing. Enriched by this new product, the CATIA composite product set has been combined to create a new add-on configuration that provides an integrated and dedicated environment to address the full sequence of steps from design to manufacturing for complex composite parts made with fabrics and/or tapes. In response to strong requirements from other manufacturing industries, such as automotive and consumer goods, Version 4 Release 2.1 delivers new high-speed milling technologies for handling NURBS and cornerization in both interactive NC and semi-automated implementations. These enhanced capabilities are delivered by the CATIA Surface Machining Programmer (SMP) and Mold and Die Machining Assistant (MAD) products. These improvements increase the quality of surface finish and reduce bench time for manufactured parts. They also increase the quality of tool path generation, especially for automotive parts, by generating NURBS curves in APT files to drive tools. In summary, Release 2.1 continues our commitment to provide service-ready Version 4 releases on an open and flexible architecture to foster customer growth. CATIA Version 4′s evolving architecture, fun-to-use applications, and built-in compliance with industry standards and practices are synonymous with competitiveness and longevity.
299-062 -2- IBM US Announcement Supplemental Information
March 9, 1999
The following topics describe the new and enhanced CATIA.Mech.Generative Composites Design Add-on Version 4, Release 2.1 Workstation products. For Configuration (5626-GCD) equivalent information on the AEC Plant and Shipbuilding Solutions products, refer to Software Announcement This Mechanical Design Solutions add-on configuration is 299-063, dated March 9, 1999. made up of the three members of the composites family: New Products and Configurations • CATIA.Composites Covering (5626-COV) • CATIA.Generative Composites Covering (5626-GCC) Release 2.1 contains a new Mechanical Design Solutions • New CATIA.Generative Tape Design (5626-GCT) product and a new Mechanical Design Solutions add-on This add-on configuration is intended for use with configuration. CATIA.Mech.Advanced Part Design and Detailing Configuration (5626-ADD), CATIA.Mech.Solid-Based Part CATIA Generative Composite Tape Design Design and Detailing Configuration (5626-SBD), or other (5626-GCT) suitable CATIA design configurations.
Composite parts are made of laminate structures wherein Enhanced Products each layer can be made of different materials. One layer ′ of that laminate structure, called a ply in CATIA s Release 2.1 delivers new functions and enhancements to Composites product family, may be made of one single 21 products to support CATIA′s integrated piece of material or of several pieces. In the case of a design-to-manufacturing architecture. ply made of several pieces of the same material, these pieces are called tapes. Mechanical Design Solutions Given a ply contour, the design of the geometries of the tapes that fill a ply must observe constraints for gaps and In addition to the new Composite Tape Design product, laps between adjacent tapes as well as the orientation of this release upgrades Mechanical Design Solution the fibers that make up the tapes themselves. Tapes are products as described below. generated on the surface while taking these constraints into account. The basic path of the tapes relies on Composites Covering (5626-COV) geodesic curve computation; that is, the center line of a tape is a geodesic driven by the direction of the ply. The • Extends the types of part geometries supported for gaps, laps, and directions of adjacent tapes are then fiber behavior simulation to include highly curved optimized within the range of tolerances supplied by the parts. designer. • Expands the types of parts supported for ply flattening. The CATIA Generative Composite Tape Design product • Enables the migration of draw reference parts to space explicitly defines tapes as new features that belong to a reference parts. ply and uses the tapes′ technological parameters to trigger the definition of their geometry. Further, the • Provides a geometrical operator to offset the space CATIA Generative Composite Tape Design product reference boundaries of a ply. enables dedicated analysis between tapes. The designer can use the results of these analyses to fine-tune the Draw Space (2D/3D) Integration (5626-DRS) definition of the tapes in each of the plies. A flat • representation of each of the tapes can be generated to Adds an option to remove axis lines generation. support downstream operations, such as nesting and • Provides the capability to manage hidden lines by solid cutting. or by view. The attributes of the generated tapes are fully integrated • Allows the transfer of non-generated elements from in the other products of the other members of the CATIA one view to another. composites family that deliver an integrated design-to-manufacturing solution for composite parts. • Implements Lite Solids support in the AUXVIEW2 function for projection views. • In all Composites products through the Part Editor • Improves the functional dimensioning and tolerancing • In the Generative Composites Covering product during (FD&T) extraction process. the generation of the laminate properties of a user mesh 3D Functional Dimensioning and Tolerancing (5626-FDT): • New and enhanced functions in this release focus on 3D In the Generative Composites Manufacturing product tolerancing display management, support of default during the programming of laser projection systems tolerances, and continued expansion of the coverage of tolerancing practices.
This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com.
IBM United States IBM is a registered trademark of International Business Machines Corporation. 299-062 • 3D tolerancing display management • Values for joggle compensation can be customized in an administrative file. − Filter capabilities for tolerances (in the FD&T function menu) • Flanges can be defined with one side only or one side − Stored tolerancing views creation and management on the folded part and the other on the flattened part. • New tolerancing capabilities • Hole symbols can be stored in the CDM library. − Basic dimensions support − Flag notes support Shape Design and Styling Solutions − Surface roughness support − Radius tolerance for all types of SOLIDE constant This release updates two products in this solution family. radius fillets and corners − ASME/ANSI tolerances applied on a unit basis Body in White Templates (5626-BWT): Release 2.1 of the support Templates product delivers new and enhanced capabilities to improve the beam modification function • Modeling improvements and to support concurrent engineering. − GSM skins support (access to SKD sub-elements) • The designer can now edit the constraints that apply − SOLIDE RSUR support to a beam section directly while creating the beam. • User interface improvements Modified constraints can be applied to all relevant sections of the beam in one operation. Constraints can − Multi-selection capability for tolerance modification be released selectively to obtain a smoother shape. − Multi-line text editor for text creation and Variants of a section created in this way can be saved modification for reuse. − Tolerance copy capability • The Template product′s BEAM function runs in a single • Other improvements interactive session to take advantage of CATIA′s multi-model environment. Every input element, such − Tolerancing feature component addition/removal as control curves and section planes, can be a − Temporary dimension creation for analysis procedural one. The system preserves the − Creation and management of points attached to a associativity of all session input data. The user can tolerancing feature load, reconcile, and analyze the multi-model inputs − Drafting tolerances conversion associated with beam features on request. Generative Composites Covering (5626-GCC): Collectively, these enhancements allow a user to create Enhancements in this release provide support for based on reference geometries created by other anistropic modeling for fabrics and tapes for finite designers. Likewise, the designer can save a design for element analysis transfer. Generative Composites reuse by others. Because the system preserves the links Covering models a bi-directional ply designed in the to the original designs, they can be updated when Composite Covering product as two superimposed permitted. unidirectional materials. GCC then computes the characteristics of these two unidirectional materials in Generative Shape Modeling (5626-GSM): This release terms of the original characteristics of the bi-directional delivers new and enhanced capabilities. materials from which they were constructed and uses the results to define the material to be linked to the finite • Associative 3D wireframe (WF) and skin features come element. The generated properties take the fiber in two dimensions: direction (stored in the fiber behavior database) into − Bi-dimensional account. -- The sweep feature is enhanced to include sweep Generative Aerospace Sheetmetal Design (5626-GSA): circle and sweep segment with two limits. Release 2.1 delivers a number of new capabilities for the -- A new capability to extract associatively Generative Aerospace Sheetmetal Design product. sub-elements of skins via SELBODY is provided. • A flange excess feature for manufacturing allows the − Mono-dimensional feature attributes are expanded addition of material to a flattened part. to include spine, plane through, and point on curve. • “No” is available after feature creation, modification, • Elements can be combined through fillet associative or deletion. operations, with or without extrapolation. • Flange sides are now computed on the flattened part • Associative analysis of length and area computation so they are continuous in tangency with the web can produce Param3D parameters. contour. • Operations are integrated with the beam function; that • BTL on joggle support is computed and represented is, the Part Editor can be used to update and visualize on the flattened part in drafting. beam parts in one operation. • The angle between web and flange can be computed • Iterative design process optimization and on a given point on the OML. capitalization now include the ability to access the feature that generated a selected geometry. • Joggle compensation is taken into account when managing hole associativity. • New settings in the Part Editor provide the ability to • see the graph of all the models in the session with Drafting updates can now be made, even if the folded their corresponding links and status. part is in the manual mode. • • A new capability to synchronize models based on Joggle can be defined on a planar flange which itself naming is supplied. is on a planar flange (that is, a second-level flange). • A graph simplification capability is provided.
299-062 -2- Manufacturing Solutions Manufacturing Infrastructure (5626-NCB): Release 2.1 delivers many new and enhanced capabilities for the This release updates seven products in this solution Infrastructure′s manufacturing program (MFGPROG) and family. tool path generator (CATMFG). • MFGPROG Enhancements: Inspection Planning Assistant (5626-IPA): Release 2.1 adds coordinate controls for cylinders and cones. Specific − Captures and/or associates images with NC constructions are supported to obtain relevant coordinate entities. NC documentation can be completed with control information. images supplied by a replay command or other actions. Setups and specific machining paths can • Construction of the center of probed circles • be clarified by having such images in the NC Construction of the intersection (actual, offset actual, documentation. or nominal) between planes and cylinders or cones • Plane gauge high retrieval for cones − Offers a new set of capabilities to improve NC programmer productivity. Lathe Machining Programmer (5626-LMP): Release 2.1 — updates the tool function and the Technological Database -- Editing assembly results are included in tool to include lathe tool holder visualization and delivers queries, syntax flexibility, modification of TSAM machining operations enhancements. for heterogeneous Mos -- Consultation — check tool consistency, expand • Actual stock computation program and display geometry • A new strategy for discontinuous profile finishing -- Verification — identify a contact point in replays, • Under spindle axis machining capability enhancement for the DetColl function • Threading operation enhancement -- Tool path computation (with CATMFG submission in the background) Mold and Die Machining Assistant (5626-MAD): -- CATIA macros — save CATIA macros from the Release 2.1 provides new and enhanced capabilities to MFGPROG function improve designer productivity in CATIA′s single- and − To provide more flexibility, several parameterized multi-model environments. Processing time has been syntaxes can be defined in NC standard functions drastically reduced, and new multi-level pencil milling for tool change instructions and cycle instructions. functions eliminate the need for manual programming. This list of possible syntaxes is provided in the • New capabilities: MFGPROG function. The user must select an alternate syntax if the first one is not appropriate. − Support for new high-speed milling technologies for It is also possible to edit the syntaxes. 3-axis surface machining • Tool Path Generator (CATMFG) Enhancements − Optimized sequencing of machineable domains in Z-Level operations − CATMFG can now output NURBS descriptions instead of the corresponding points. Besides − 3D-curve function permits left or right offsets in the reducing the amount of data required to define a “by contact” mode tool path, the use of NURBS preserves the homogeneity of the computed path. Optimization − Multi-level pencil milling operations with depth is accomplished easily with this compacted format. control − CATMFG can now generate GOTO instructions in − Additional pencil milling options to exclude either the same format as the CATLATH utility. This vertical or horizontal domains capability allows CATMFG to make direct use of − Direct query access to the Technological Database existing post processors. By default, CATMFG for tools and tool assemblies outputs are compatible with CATNC outputs. • Enhancements: Release 2.1 also adds a new Technological Database catalog. This catalog, called Tool List, allows the NC − Performance improvements in local cavity roughing administrator to organize his database to predefine the − Manual sequencing of machining processes via the list of available tools and/or tool assemblies for a interface particular machine. The tool list in this catalog is used by the NC services. Multi-Axis Machining Programmer (5626-MMP): This ′ release enhances the Programmer s side curve Prismatic Machining Programmer (5626-PMP): machining capabilities and provides a new machining Release 2.1 delivers new capabilities for machining strategy: operations. • Handles angular contours and provides two additional • Sel point to define check curves for contouring types of cornerization for high-speed milling operations • Allows the Programmer to generate smooth tool paths • Quick axial operation re-initialization for interactive around corners productivity • Auto-search on edge for contour definition for SOLIDE • Implements a fixed tool axis strategy that can be • Thickness parametrization in all PMP machining milling applied to complex geometries, a unique feature operations compared to competitor products • Syntax flexibility (selection from a list) for axial operations • Spindle statement for PMP/LMP integration in drilling cycles • Complement of ramping with CATIA macros • Feedrate modification for corners • Associativity of check elements in contouring
-3- 299-062 • Pattern selection for SOLIDE with associativity CATIA Application Architecture Solutions (CAA)
Surface Machining Programmer (5626-SMP): Release 2.1 Two products in this solution family are updated. provides new and enhanced capabilities. Exact Solids (5626-SOE): The goal of the Release 2.1 • New capabilities: enhancements is to improve user productivity for large − Support for new high-speed milling technologies in models through: 3-axis surface machining • Improved performances for operations and updates − Optimized sequencing of machineable domains in (20% to 30%) Z-level operations • Improved performances for SOLIDE function − 3D-curve permits left or right offsets in the “by interaction (20%), edge selection (less than five contact” mode seconds), and visualization (up to 50%) − Associativity in ISO-FAC milling on faces with holes • Improved stability of contextual features: to prevent the tool path from rolling over the edges of holes − Automatic reroute if a contextual feature is inserted, deactivated, or deleted • Enhancements: − Manual reroute extended to any contextual feature − Performance improvements in local cavity roughing and is integrated in the update process − Manual sequencing of machining processes via the • interface Improved integration of SKIN function elements • Fewer limitations on fillets and drafts Equipment and System Engineering Solutions (ESE) Visualization Studio (5626-VST) This release enhances three products in this solution • family. The capability to add glow and flare effects on calculated images and a new tool to analyze precisely Electrical Generative Formboard (5626-ELG) the luminosity distribution of an image are added. • Rendering of transparent objects has been improved • Enhancements to the comparison mechanism that to take into account how the thickness of the object compares the 3D harness and the formboard layout affects light attenuation to make the rendering of such now allows the designer to detect broken or parts more physically correct and realistic. concatenated bundle segments and to update the formboard if required. • The antializing parameters have been extended to provide very coarse draft images quickly, reserving • The product now takes into account the ability to have more extensive computation to create perfect several branches of the harness connected to the high-resolution final images. same electrical connector part and to report information on the different branches. • Documentation has been enhanced, and a new chapter about the image viewer has been added. • Improved reporting capabilities enable the user to get new types of dimensioning along the bundle segments network from one node to another. CATIA/CADAM Drafting Product Suite
Electrical Wire Bundle Installation (5626-ELW) Release 2.1 delivers numerous system and ease-of-use improvements that focus on improving designer • Provides the ability to define the bend radius productivity for two of the five products in the parameter as a multiplied factor of the diameter of a CATIA/CADAM Drafting suite: CADAM Drafting bundle segment. (5626-CCD) and CATIA/CADAM Hybrid Raster (5626-RAS). Though technically members of other product groupings • The COMPUTE function is more fault tolerant. (Drafting is a Mechanical Design product and Hybrid • Provides a new routine to generate “rolled rope” Raster is a CAA Infrastructure Solutions Logistics shape types for bundle segments to visualize the product), they are treated together here for ease of different alternatives taken by a harness when it is reference. The enhancements listed below are distributed installed in a vehicle or to give the geometric envelope across both products. Enhancements apply to both of the different bundle segments when they are under Windows NT and UNIX unless annotated as (a) for stress, such as when being subject to vibration. Windows NT only or (b) for UNIX only. • Space Analysis (5626-SPA) System Enhancements (a) − User settings are saved in the system registry and • Integration of review capabilities in the 4D Navigator are restored the next time the same user restarts • Clash detection using a new algorithm that provides CADAM Drafting. better performance and lower memory usage − When writing an image to the clipboard, the • A dynamic sectioning function to dynamically scan a designer can specify that it be saved in 3D model and view it in a 2D viewer monochrome. • Optimized performance for distance measurement • CADPROF Enhancements • The ability to read the results of a batch computation − Drawing management parameters can now be in the 4D Navigator stored on the server so that CADAM Drafting can be installed on clients. (a) • The ability to create the results of a section plane in a model
299-062 -4- − Cursor type cross hairs can now be selected as an -- The designer can select a dimension when input device customization option. (a) positioning a newly created dimension to create a dimension line that is aligned with the selected − A new switch allows the user to specify that the dimension. arrowheads used for witness lines be positioned directly on the extension line to accommodate -- When selecting a basic tolerance type on the high-resolution printers and plotters. dimension parameters panel, the designer can also choose the style of the dimension box: − The clearance between dimension text and the Tall-Wide (default style), Short-Thin, or dimension witness line can now be specified. Short-Wide. • EFT Enhancements -- The TOUCH dialog has been enhanced to allow − AutoCAD Release 14 models are now supported for trailing text to be keyed and/or the dimension both input and output. line arrows to be flipped immediately after placing the dimension. − AutoCAD Release 13 ellipse, Mline, spline, and tolerance entities are now supported. Also, immediately after selecting the geometry to be dimensioned, an existing dimension′s − Three- and four-point solid area fills are now witness line may be selected to create a mapped to AutoCAD 2D solids to provide a more dimension that is aligned with that existing visibly accurate mapping. dimension. • General User Interface Enhancements -- After placing a dimension using TOUCH, the − The status bar shows the status of save user can position the dimension by indicating a operations. (a) location. − − The status bar shows the current X,Y location of the FILE cursor. (a) -- The user can display the 0,0 X,Y axis location − Data tips for model geometries are now supported. when creating a new model. When the cursor is paused over an element in a -- After defining plot data on an overlay, if FILE is model, a pop-up window displays the geometric selected from within the plot data function, properties of the element. (a) PARENT will be the default file option instead of − Larger function key toolbar buttons are provided for ACTIVE (b). This is done as a convenience displays with resolutions of 1280 x 1024, or because plot data is stored in the overlay greater. (a) parent. − − Push buttons for Copy, Move, Rename, Delete, RO, GROUP: A confirmation dialog has been added ROP, and Reset have been added to the Remote before Layers mode is activated for the first time. Open window. (a) − NOTE − In Indicate Snap mode, the status bar displays the -- The Dictionary function in the Special Character type of snap that occurred. (a) window has been enhanced. Users can now − A new command bar button, JUMP, returns the organize logical groups of text strings on detail current window to its previous display setting. pages in the dictionary drawing. − The mouse may be used in combination with -- A new menu item has been added to allow table keyboard keys to pan and zoom. (a) elements to be created. − The F5 key will display the CADAM Drafting -- Spreadsheet data in the standard comma Function Key box. (a) delineated values form can be imported to and exported from a table. − A new toolbar, containing the FK Window Set function, has been added. This toolbar provides -- Menu item CHNG+MOVE allows the position of access to the Window Set function from within any two notes to be swapped. function key. (a) -- A FIT operation can now be undone with a YN. − The Options menu now provides four cursor types: -- When a FIT operation is performed between Default, CrossHair, Tracking Cross, and Simple points for an angled note, the distance used will Tracking Cross. (a) now be the distance between the points along ′ • Enhancements to Function Key Actions the note s axis. − − AUX VIEW: In addition to selecting a point, the OVERLAY: A new function, RECALL, has been added to allow the replacement of a member of an designer can now indicate a point or key in a point ′ when defining an orthographic view using overlay family with the member s disk image. START+ORTHOGRAPHIC, turning the current view RECALL allows a user to easily discard changes using MOVE, moving the current view using MOVE, made to a single member, or to update a member or changing the scale of the current view using with changes that a colleague may have made and SCALE. filed after the user originally called the overlay family. − CIRCLE: An ellipse can now be defined by selecting lines that make up a surrounding rectangle. − RELIMIT: A new menu item, JOIN, has been added to allow the user to create a single line or arc out − DETAIL: The detail LIST window is now available of two disjoint but collinear lines or arcs. for use with the DITTO and USE functions. − DIMENSION
-5- 299-062 • Host CADAM Compatibility Enhancements • CATIA.Mech.Downstream Detailing Configuration (5626-DWD) − A new parameter has been added to define whether • CATIA.Mech.Solid-Based Part Design Configuration a geometry created using the Offset function key (5626-SBP) inherits the color and style attributes of the parent • CATIA.Mech.Solid Based Part Development geometry. Configuration (5626-SBV) • − VEDIT geometry is provided within CCD to support CATIA.Mech.Solid-Based Part Design and Detailing variable electronic symbols. Configuration (5626-SBD) • CATIA.Mech.Feature-Based Part Design and Detailing • Hybrid Raster Enhancement Configuration (5626-FBD) • CATIA.Mech.Advanced Part Design Configuration − The Intelligent Character Recognition (ICR) function (5626-AD1) has been enhanced to support word recognition and • CATIA.Mech.Advanced Part Design and Detailing dictionary lookup when converting raster text to Configuration (5626-ADD) CADAM Drafting note entities. • CATIA.Mech.Advanced Part Development and − A Hybrid Raster license is no longer consumed if Detailing Configuration (5626-ADV) the user hits the HRAS function key and • CATIA.Mech.Assembly Design and Detailing immediately leaves the function key without Configuration (5626-ASD) selecting any menu item. • CATIA.Mech.Advanced Product Design Configuration (5626-AD3) − Text and annotations can be converted from vector • CATIA.Mech.Detailing Add-on Configuration to raster format. (5626-DET) • • Interactive User Exit (IUE) Enhancements: IUE now CATIA.Mech.Generative Composites Design Add-on Configuration (5626-GCD) supports the opening and filing of models on remote • hosts. CATIA.Mech.Sheetmetal Design & Detailing Configuration (5626-SDD) • Plotting Enhancements • CATIA.Mech.Solid Design Add-On Configuration (5626-SDA) − Users can now map colors used in a drawing to specific widths when plotting. CATIA Shape Design & Styling (SDS) Solutions − Multiple plotting requests are now allowed in a single request file. This approach causes CADAM • CATIA.SDS.Surface Part Design Configuration Drafting plotting to process multiple plots within a (5626-SUP) single execution. (a) • CATIA.SDS.Shape Design and Detailing Configuration (5626-ASH) − The COLORMAP keyword allows the designer to • CATIA.SDS.Styling & Rendering Configuration override the RGB values defined in the color table. (5626-STY) − The plot scheduling interface has been rewritten to • CATIA.SDS.Surface Modeler Add-on Configuration allow multiple new plots, each potentially (5626-SUR) containing multiple overplots, to be scheduled as • CATIA.SDS.Generative Shape Design Configuration part of a single request. (a) (5626-GSH) • CATIA.SDS.Generative Body in White Add-On − CGM files created by the CCD Plot facility will now Configuration (GBW) have a .cgm file extension. (a) • Licensing Changes (a): CATIA Manufacturing (MFG) Solutions
− License Power/iFOR (iFOR/LS) will no longer be • CATIA.MFG.Multi-Axis Manufacturer Configuration provided on the CADAM Drafting installation media. (5626-MXM) CADAM Drafting now supports and recommends • ′ CATIA.MFG.Mold & Die Manufacturer Configuration IBM s License Use Management (LUM) product for (5626-MDM) the management of software licenses. • CATIA.MFG.Prismatic Machining Add-On Configuration − CADAM Drafting now offers a full-function (5626-PRM) demonstration license for 30 days after the initial • CATIA.MFG.Surface Machining Add-On Configuration installation, even without a valid product license. (5626-SUM) If the customer does not obtain a valid license • CATIA.MFG.Multi-Axis Machining Add-On within the 30-day period, the product will revert to Configuration (5626-MUM) the previously implemented demonstration mode. • CATIA.MFG.Tooling Machining Add-On Configuration (5626-TOM)
CATIA/CADAM Configurations CATIA Analysis & Simulation (ANS) Solutions • CATIA.ANS.Finite Element Analysis Configuration CAA Application Development Solutions (5626-FAN) • CATIA.ANS.Finite Element Integrated Analysis • CATIA.CAA.Application Development Configuration Configuration (5626-FEI) (5626-CAD)1 • CATIA.ANS.Design and Analysis Configuration (5626-DAA) 1 Available only on AIX workstations. • CATIA.ANS.Analysis Add-on Configuration (5626-CAN) • CATIA.ANS.Generative Part Analysis Add-On CATIA Mechanical Design (Mech) Solutions Configuration (5626-GPA)
• CATIA.Mech.Drawing Production Configuration (5626-DRP)
299-062 -6- CATIA Equipment & Systems Engineering (ESE) ┌─────┬───────────────────────────────────┐ │ │SHAPE DESIGN & STYLING SOLUTIONS │ Solutions │ P ├───────────────────────────────────┤ │ R │ │ • CATIA.ESE.3D Electrical Systems Engineering │ O │ CONFIGURATIONS │ │ D │ │ Configuration (5626-EEM) │ U ├─────┬─────┬─────┬─────┬─────┬─────┤ • CATIA.ESE.3D Electrical Engineering & Formboard │ C │ S │ A │ S │ S │ G │ G │ Configuration (5626-EEF) │ T │ U │ S │ T │ U │ S │ B │ │ │ P │ H │ Y │ R │ H │ W │ Refer to Software Announcement 299-063, dated ├─────┼─────┼─────┼─────┼─────┼─────┼─────┤ │ COM │ X │ X │ X │ │ X │ │ March 9, 1999 (for AEC Plant Solution Configurations). │ LIB │ X │ X │ X │ │ X │ │ │ WF3 │ X │ X │ X │ │ X │ │ CATIA/CADAM Configuration Content │ DYS │ X │ X │ X │ │ X │ │ │ SUD │ X │ X │ X │ X │ X │ │ │ ASU │ X │ X │ X │ X │ X │ │ The configuration trigrams are listed across the top of the │ FRF │ │ X │ X │ X │ X │ │ matrix. The product trigrams are listed down the left side │ DR2 │ │ X │││││ of the matrix. │ DRA │ │ X │││││ │ DRS │ │ X │││││ ┌─────┬──────────────┐ │ VST │ │ │ X ││││ │ │CAA SOLUTIONS │ │ DXF │ │ X │││││ │ P ├──────────────┤ │ PA3 │ ││││││ │ R │ │ │ SOE │ ││││││ │ O │CONFIGURATIONS│ │ SHE │ ││││││ │ D │ │ │ GSM │ │ │ X │ │ X │ X │ │ U ├─────┬────────┘ │ BWT │ │││││X│ │ C │ C │ │ CGO │ │ │ X ││││ │ T │ A │ │ STL │ │ │ X ││││ │ S │ D │ └─────┴─────┴─────┴─────┴─────┴─────┴─────┘ ├─────┼─────┤ │ COM │ X │ │ GII │ X │ ┌─────┬───────────────────────────────────┐ │ ATT │ X │ │ │MANUFACTURING SOLUTIONS │ │ SWE │ X │ │ P ├───────────────────────────────────┤ └─────┴─────┘ │ R │ │ │ O │ CONFIGURATIONS │ │ D │ │ │ U ├─────┬─────┬─────┬─────┬─────┬─────┤ ┌─────┬────────────────────────────────────────────┐ │ C │ M │ M │ P │ S │ M │ T │ │ │MECHANICAL DESIGN SOLUTIONS │ │ T │ X │ D │ R │ U │ U │ O │ │ P ├────────────────────────────────────────────┤ │ S │ M │ M │ M │ M │ M │ M │ │ R │ │ ├─────┼─────┼─────┼─────┼─────┼─────┼─────┤ │ O │ CONFIGURATIONS │ │ COM │ X │ X │││││ │ D │ │ │ LIB │ ││││││ │ U ├──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┬──┤ │ WF3 │ X │ X │││││ │ C │D│D│S│S│S│F│A│A│A│A│A│D│S│S│G│ │ DYS │ │ X │││││ │ T │R│W│B│B│B│B│D│D│D│S│D│E│D│D│C│ │ NCB │ X │ X │ X │ X │ X │ X │ │ S │P│D│P│V│D│D│1│D│V│D│3│T│D│A│D│ │ MAA │ ││││││ ├─────┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┼──┤ │SUD││X│││││ │ COM │ X│ X│ X│ X│ X│ X│ X│ X│ X│ X│ X│ │ X│ │ │ │NC3│││││││ │ LIB │ X│ X│ X│ X│ X│ X│ X│ X│ X│ X│ X│ │ X│ │ │ │ASU│││││││ │ DR2 │ X│ X│ │ │ X│ X│ │ X│ X│ X│ X│ X│ X│ │ │ │NC5│││││││ │ DRA │ X│ X│ │ │ X│ X│ │ X│ X│ X│ X│ X│ X│ │ │ │NCR│││││││ │ DRS │ │ X│ │ │ X│ X│ │ X│ X│ X│ X│ X│ X│ │ │ │PA3│││││││ │ WF3 │ │ │ X│ X│ X│ X│ X│ X│ X│ X│ X│ │ X│ X│ │ │SOE│││││││ │ DYS │ X│ X│ X│ X│ X│ X│ X│ X│ X│ X│ X│ │ X│ X│ │ │DRA│││││││ │ PA3 │ │ │ X│ X│ X│ X│ X│ X│ X│ X│ X│ │ X│ X│ │ │DR2│││││││ │ SOE │ │ │ X│ X│ X│ X│ X│ X│ X│ X│ X│ │ X│ X│ │ │DRS│││││││ │ FEA │ │││││ X│ X│ X│ X│ X│ X│││││ │PMP│X│X│X│X│X│X│ │ SUD │ ││││││ X│ X│ X││ X│││││ │MAD││X││││X│ │ ASU │ ││││││ X│ X│ X││ X│││││ │PMA│││X││││ │ FRF │ ││││││││││ X│││││ │TSA│X│X│X│X│X│X│ │ ASS │ │││││││││ X│ X│││││ │DXF│││││││ │ KIN │ │││││││││ X│ X│││││ │SMP│X│X│ │X│X│X│ │ IMD │ │││││││││││││││ │MMP│X││││X││ │ SPA │ │││││││││ X│ X│││││ │IGS│X││││││ │ GPS │ │ │ │ X│ ││││ X│││││││ └─────┴─────┴─────┴─────┴─────┴─────┴─────┘ │ VST │ ││││││││││ X│││││ │ DXF │ X│ X│ │ │ X│ X│ │ X│ X│ X│ X│ X│ X│ │ │ │ GPO │ │ │ │ X│ ││││ X│││││││ │ SHE │ ││││││││││││ X│││ │ ASS │ │││││││││││││││ │ IGS │ │││││││││││││││ │ GSM │ │││││││││││││││ │ COV │ ││││││││││││││ X│ │ GCC │ ││││││││││││││ X│ │ GCT │ ││││││││││││││ X│ └─────┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┘
-7- 299-062 • CATIA.Realistic Rendering Product (5626-REN) ┌─────┬──────────────────────────────┐ • — │ │ANALYSIS & SIMULATION SOLUTION│ CATIA.Data Management Build Time Product │ P ├──────────────────────────────┤ (5626-CDB) │ R │ │ • CATIA.Data Management — Run Time Product │ O │ CONFIGURATIONS │ (5626-CDR) │ D │ │ • CATIA.Data Management Access Product (5626-CDA) │ U ├─────┬─────┬─────┬─────┬──────┤ • │ C │ F │ F │ D │ C │ G │ CATIA.CDM-PM Integration Product (5626-CDP) │ T │ A │ E │ A │ A │ P │ • CATIA.Data Management — Library Product (5626-LIC) │ S │ N │ I │ A │ N │ A │ • CATIA.Distributed Services Product (5626-CDS) ├─────┼─────┼─────┼─────┼─────┼──────┤ • CATIA.Solid Mock-Up Product (5626-SOM) │ COM │ X │ X │ X │ │ │ • │ WF3 │ X │ X │ X │ │ │ CATIA.4D Navigator Product (5626-N4D) │ DYS │ X │ X │ X │ │ │ • CATIA.Conferencing Groupware Product (5626-CGW) │ SPM │ X │ X │ X │ X │ │ │ FEM │ X │ X │ X │ X │ │ │ ANI │ X │ X │ X │ X │ │ CAA Logistics Products │ ELF │ │ X │ X │ │ │ │ SOE │ │ │ X │ │ │ • DXF/DWG Interface Product (5626-DXF) │ PA3 │ │ │ X │ │ │ • CATIA.Viewing Services Product (5626-CVS) │ SUD │ X │ X │ X │ │ │ • │ GPS │ ││││X│ CATIA.IGES Interface Product (5626-IGI) │ GPD │ ││││X│ • CATIA.IGES Integrated Interface Product (5626-IGS) │ GPO │ ││││X│ • CATIA.IGES MIL Standard 28000 Product (5626-IGC) └─────┴─────┴─────┴─────┴─────┴──────┘ • CATIA.CATIA/CADAM Coupler Product (5626-CCC) • CATIA.Publishing Product (5626-PBG) • ┌───────┬──────────────────┐ CATIA.STEP AP203 Interface Product (5626-STP) │ │EQUIPMENT & │ • CATIA.STEP AP214 Infrastructure Interface Product │ │SYSTEM ENGINEERING│ (5626-ST1) │ │SOLUTIONS │ • CATIA.CATIA/CADAM Hybrid Raster Product │ P ├──────────────────┤ │ R │ │ (5626-RAS) │ O │ CONFIGURATIONS │ • CATIA.CADAM IUE Product (5626-IUE) │ D │ │ • CATIA.CATIA/CADAM MCX Translator Product │ U ├────────┬─────────┤ (5626-MCX) │ C │ E │ E │ │ T │ E │ E │ │ S │ M │ F │ CATIA “a la carte” Mechanical Design (Mech) ├───────┼────────┼─────────┤ Solutions │ COM │ X │ X │ │ LIB │ X │ X │ │ WF3 │ X │ X │ • CATIA.Drafting Product (5626-DRA) │ DYS │ X │ X │ • CATIA.Draw-Space (2D/3D) Integration Product │ SOE │ X │ X │ (5626-DRS) │ PA3 │ X │ X │ • │ SPA │ X │ X │ CATIA.Feature-Based Design Product (5626-FEA) │ SPN │ │ │ • CATIA.Assembly Modeling Product (5626-ASS) │ TU3 │ │ │ • CATIA.3D Functional Dimensioning and Tolerancing │ ELD │ X │ X │ Product (5626-FDT) │ ELW │ X │ X │ • │ ELG │ │ X │ CATIA.Sheetmetal Design Product (5626-SHE) │ DRA │ │ X │ • CATIA.CADAM Drafting Product (5626-CCD) │ DR2 │ │ X │ • CATIA.CATIA/CADAM 2D Markup and Annotation │ DXF │ │ X │ Product (5626-MU2) │ SPD │ X │ X │ • │ DRS │ │ X │ CATIA.Generative Aerospace Sheetmetal Design └───────┴────────┴─────────┘ Product (5626-GSA) • CATIA.Composites-Covering Product (5626-COV) • CATIA.Generative Composites Covering Product (5626-GCC) CATIA/CADAM Product List • CATIA.Generative Composite Tape Design Product (5626-GCT) CAA Application Development Products CATIA “a la carte” Shape Design & Styling (SDS) • CATIA.Graphics Interactive Interface Product Solutions (5626-GII) • CATIA.CPW/Automated Test Tools Product (5626-ATT) • CATIA.Generative Shape Modeling Product • CATIA.CPW/Software Environment Product (5626-SWE) (5626-GSM) • CATIA.CATIA/Alias Interoperability Product (5626-CAI) • CAA Infrastructure Products CATIA Surface Design Product (5626-SUD) • CATIA.Advanced Surface Design Product (5626-ASU) • • CATIA.Free Form Design Product (5626-FRF) CATIA.Object Manager Product (5626-COM) • CATIA.Cloud to Geometry Product (5626-CGO) • CATIA.Library Product (5626-LIB) • • CATIA.Develop Product (5626-DEV) CATIA.2D Wireframe and Annotation Product • CATIA.Global Shape Deformation Product (5626-GSD) (5626-DR2) • CATIA.Engraving/Embossing Product (5626-ENG) • CATIA.3D Wireframe Product (5626-WF3) • • CATIA.Geodesic Product (5626-GEO) CATIA.Dynamic Sketcher Product (5626-DYS) • CATIA.Body in White Templates Product (5626-BWT) • CATIA.3D Parametric Variational Modeler Product (5626-PA3) • CATIA.Exact Solids Product (5626-SOE) • CATIA.Image Design Product (5626-IMD) • CATIA.Visualization Studio Product (5626-VST)
299-062 -8- CATIA “a la carte” Manufacturing (MFG) Solutions Education Support • CATIA.Manufacturing Infrastructure Product (5626-NCB) Call IBM Engineering Technology Solutions/North America • CATIA.Milling Analysis Product (5626-MAA) (ETS/NA) response line at 800-395-3339 for schedules and • CATIA.Multiple Axis Milling Product (5626-NC5) enrollments. • CATIA.Rough Cutting Product (5626-NCR) • CATIA.Prismatic Machining Programmer Product Technical Information (5626-PMP) • CATIA.Surface Machining Programmer Product (5626-SMP) Specified Operating Environment • CATIA.Multi-Axis Machining Programmer Product (5626-MMP) Hardware Requirements • CATIA.Mold and Die Machining Assistant Product (5626-MAD) Note: References to “CADAM Drafting products” apply to • CATIA.Prismatic Machining Assistant Product the CATIA/CADAM Drafting product suite: (5626-PMA) • • CATIA.Toolshop Access Product (5626-TSA) CADAM Drafting (5626-CCD) • • CADAM IUE (5626-IUE) CATIA.Lathe Product (5626-TUR) • • CATIA.Post Processor Builder Product (5626-PPB) CATIA/CADAM 2D Markup and Annotation (5626-MU2) • • CATIA/CADAM MCX Translator (5626-MCX) CATIA.Robot and Controller Definition Product • (5626-ROC) CATIA/CADAM Hybrid Raster (5626-RAS) • CATIA.Cell Design and Robot Programming Product These products run on the RS/6000 , AIX, (5626-ROS) Hewlett-Packard HP-UX, and Windows NT platforms, but • CATIA.Nesting Product (5626-NES) not on the Sun Microsystems or Silicon Graphics UNIX • CATIA.STL Rapid Prototyping Product (5626-STL) platforms. • CATIA.Inspection Planning Assistant (5626-IPA) • CATIA.Lathe Machining Programmer Product Hardware Requirements in an AIX Environment: CATIA (5626-LMP) Solutions Version 4 Release 2.1 is designed to operate • CATIA.Generative Composites Manufacturing Product with the Motif CATIA user interface. Elfini is now (5626-GCM) parallelized on RS/6000 SMP (multiprocessor with shared memory) machines. CATIA “a la carte” Analysis & Simulation (ANS) Solutions Processor Requirements Any RS/6000 supported under AIX Version 4.3.0, 4.3.1, or • CATIA.Assembly and Substructure Analysis Product 4.3.2 at planned availability dates, provided the (5626-ASA) requirements described below are met. • CATIA.Scientific Presentation Manager Product (5626-SPM) • Required Processor Components and Features • CATIA.Finite Element Modeler Product (5626-FEM) • CATIA.Analysis Infrastructure Product (5626-ANI) − Real memory: • CATIA.ELFINI Solver Product (5626-ELF) -- A minimum of 64 MB of real memory is required. • CATIA.Kinematics Product (5626-KIN) • CATIA.Generative Part Stress Analysis Product -- 128 MB real memory is recommended to run (5626-GPS) CATIA Solutions Version 4 in a production • CATIA.Generative Part Optimization Product environment. (5626-GPO) • CATIA.NASTRAN Interface Product (5626-NAS) For the CADAM Drafting products, the minimum • CATIA.ANSYS Interface Product (5626-ANS) memory requirement is 32 MB (48 MB if using the • CATIA.Generative Part Dynamic Analysis Product Softgraphics display option); 64 MB is (5626-GPD) recommended for running in a production environment. CATIA “a la carte” Equipment & Systems The real memory requirement may be greater if Engineering (ESE) Solutions large or complex models are to be used.
− • CATIA.Space Analysis Product (5626-SPA) A 4-mm tape drive, 8-mm tape drive, or CD-ROM • CATIA.Space Navigation Product (5626-SPN) drive for program installation. • CATIA.Electrical Device and Support Modeling Product Installation of CATIA Solutions Version 4 for (5626-ELD) RS/6000 requires an internal or external 2.3 or 5.0 • CATIA.Electrical Wire Bundle Installation Product GB 8-mm tape drive, 4-mm tape drive, or CD-ROM (5626-ELW) drive. These drives require a SCSI • CATIA.Electrical Generative Formboard Product High-Performance Input/Output (I/O) Controller, (5626-ELG) which is either standard or an optional feature, • CATIA.Systems Pathways Definition Product depending on the RS/6000 model. (5626-SPD) • CATIA.3D Tubing Design Product (5626-TU3) This equipment is required to perform an initial • CATIA.System Schematics Product (5626-SCH) installation of CATIA Solutions Version 4. The • CATIA.Fitting Simulation Product (5626-FIT) product documentation explains how to install • CATIA.Knowledge Engineering Product (5626-CKE) CATIA Solutions Version 4 on other • CATIA.2D Building Design Product (5626-BDG) network-connected RS/6000 machines after the • CATIA.3D Structures Product (5626-STM) initial installation with the drive. • CATIA.Ship Steelwork Design Product (5626-SHB) • CATIA.Ship Steelwork Production Product (5626-SHP)
-9- 299-062 A CD-ROM is required for the CATIA online − POWER GXT500P 12-Bit (feature number 2854) documentation in the FrameMaker format. − POWER GXT550P 24-Bit (feature number 2855) − POWER GXT800P 24-Bit (feature number 2853 or − Direct Access Storage: CATIA Solutions Version 4 2859) licensed programs and configurations, user data, − POWER GXT800M 24-Bit (feature number 2850) and user programs may be stored on any internal − POWER GXT1000 Model 001 or 002 (machine type or external direct access storage device (DASD) 7250-001 or 7250-002) supported by the RS/6000. The following DASD − POWER GXT3000P (feature number 2825) requirements for CATIA Solutions Version 4 are approximate: Notes -- All installed products of CATIA Solutions • Other adapters are not supported by CATIA Solutions Version 4: 600 MB. Refer to the Program Version 4. Although CATIA Solutions Version 4 may Directory to estimate disk space requirements run with other adapters, incidents encountered which for specific products and configurations. are specific to other adapters will not be accepted for analysis or correction. -- Usage environment: 40 MB • POWER GXT150 and GXT250 processor families are not -- Administration environment: Up to 100 MB, without the demonstration files delivered with recommended for OpenGL applications such as CATIA Solutions Version 4 products. CATIA.4D Navigator Product or CATIA.Assembly Modeling Product. -- Minimum paging space: 128 MB. Size of paging • space must be at least twice the size of memory. Because Motif CATIA requires several colormaps, the use of the POWER GXT250 processor family may result -- The five CADAM Drafting products collectively in technicolor effects when using some CATIA features require 185 MB. such as the part editor or the color chooser. • Optional Components and Features • The POWER Gt4xi 8-Bit and 24-Bit graphic adapters (feature number 2711 and 2712) are withdrawn from − Locally-Attached Plotters: CATIA Solutions support with CATIA Version 4 Release 2.1. Version 4 directly supports locally attached IBM color pen plotters. CATIA Solutions Version 4 can Peripheral Requirements be used with other OEM plotters (refer to the Specific Programming Requirements for AIX • Required Components and Features section on for more details). − Three-button mouse (feature number 6041) or IBM − Enterprise Server Communication Adapters: CATIA 5083 or 6093 Tablet and cursor (feature number Solutions Version 4 provide utilities to convert 1511). CATIA data between the formats used on RS/6000 − An alphanumeric keyboard, from the range systems and IBM enterprise server systems. supported by graPHIGS. A specific keyboard may Transferring CATIA data between CATIA on be required for National Language Support; for RS/6000 and another CATIA system on an IBM example, the Japanese keyboard is required for enterprise server requires a communication Kanji support. adapter in the RS/6000, and other associated enterprise server communication hardware. − One display compatible with the graphics devices Consult with your IBM representative for listed above (for example, a 6091 19-inch color configuration guidance. display). Configuration Requirements • Optional Features ┌────────────────────────────────────────────┐ − Dials (IBM 6094 Model 010) may be used for local │ RS/6000 Required │ graphical transformations such as rotation, pan, │ Graphics device adapter Required │ │ Color graphics display Required │ and zoom. CATIA Solutions Version 4 also │ Keyboard Required │ provides access to these transformations through │ 3─button mouse or Tablet Required │ the use of keyboard functions. │ with cursor │ │ CD─ROM or tape drive Required* │ − The Lighted Program Function Keyboard (LPFK, ├────────────────────────────────────────────┤ IBM 6094 Model 020) may be used for CATIA │ * For installation only. │ function selection. Users may also select CATIA └────────────────────────────────────────────┘ functions using the IBM 5083 or 6093 Tablet and cursor, or the three-button mouse. • — Required Processor Components and Features One − Spaceball (IBM 6094 Model 030 or Model 040) of the following graphics devices: provides the same functions as Dials: local − POWER GXT150 (feature number 2767) graphical transformations such as rotation, pan, − POWER GXT150L (feature number 2660) and zoom. The CADAM Drafting products do not − POWER GXT150M (feature number 2650) support Spaceball. − POWER GXT150P (feature number 2648), for use − Spacemouse (Magellan) provides the same with RS/6000 7020-40P and 7248-120 or 132 (43P) functions as Dials: local graphics transformations − POWER GXT250P (feature number 2851) such as rotation, pan, and zoom. The CADAM − POWER GXT255P (feature number 2852) For a Drafting products do not support Spacemouse. better graphic performance level on GXT255P, the use of AIX mode “ONLY8BIT=TRUE” is − Dials, LPFK, and Spaceball (optional) may be recommended. attached to Graphics Application Input Adapter − POWER GXT500 12-Bit (feature number 2644) (for (feature number 2810), or RS/6000 serial ports. machines 41T, 41W, 42T, and 42W) − POWER GXT500D 24-Bit (feature number 2646) (for machines 41T, 41W, 42T, and 42W)
299-062 -10- Hardware Requirements in a Hewlett-Packard • Required Processor Components and Features — One Environment: CATIA Solutions Version 4 is designed to of the following graphics cards: operate with the CATIA Motif user interface. − Integrated Color Graphics Processor Requirements − CRX (A2608A or Option #AQD) − CRX-24 (A2602A or Option #AQ8) Any HP 9000 Series 700 workstation, including J-Class, − CRX-24Z (A2603A or option #AQ9) C-Class and B-Class, supported under HP-UX 10.20 A.C.E., − CRX-48Z (A2609 or option #AQA) provided that the requirements described below are met. − HCRX-8 (option #AQF) − • HCRX-8Z (option #AQH) Required Processor Components and Features − HCRX-24 (option #AQG) − Real memory: A minimum of 64 MB of real memory − HCRX-24Z (option #AQJ) is required; 128 MB of real memory is − VISUALIZE 8 (option A4441A) recommended to run CATIA Solutions Version 4 in − VISUALIZE 24 (option A4442A) a production environment. − VISUALIZE 48 (option A4244A) − VISUALIZE 48XP For the CADAM Drafting products, the minimum − VISUALIZE FX2 memory requirement is 32 MB (48 MB if using the − VISUALIZE FX4 Softgraphics display option); 64 MB is − VISUALIZE FX6 recommended for running in a production environment. Notes The real memory requirement may be greater if • Visualize FX graphic adapters are required to access large or complex models are to be used. products and functions that have a requirement on OpenGL. − An internal or external 4-mm DAT tape drive or CD-ROM drive is required for program installation. • Because Motif CATIA requires several colormaps, the The tape drive must be compatible with HP 6400 use of CRX graphic adapters may result in technicolor Model 2000 (Read/Write 90 meter tapes). effects. This equipment is required to perform an initial Peripheral Requirements installation of CATIA Solutions Version 4. The Two types of connectors can be used for a peripheral product documentation explains how to install component: HP-HIL connector or serial connector. CATIA Solutions Version 4 on other network-connected HP workstations after the initial • Required Components and Features installation with the drive. − Three-button Mouse (A2839B or A2838A) or A CD-ROM is required for the CATIA online Graphics Tablet (A4364A, A4365A, 46087C, 46088C, documentation in the FrameMaker format. 46090C, or 46091C). − Disk space: CATIA Solutions Version 4 licensed − An alphanumeric keyboard. A specific keyboard programs and configurations, user data and user may be required for National Language Support; for programs may be stored on any internal or external example, the Japanese keyboard is required for disk by the HP workstation. Kanji support. Disk space requirements for CATIA Solutions − One display compatible with the graphics cards Version 4 are approximately as follows: listed above.
-- All installed products of CATIA Solutions • Optional Features Version 4: 650 MB. Refer to the Program Directory to estimate disk space requirements − 9-Dial box (46085A) or 8-Dial box (A4362A) may be for specific products and configurations. used for local graphical transformations such as rotation, pan, and zoom. CATIA Solutions -- Usage environment: 40 MB Version 4 also provides access to these transformations through the use of keyboard -- Administration environment: Up to 100 MB, functions. without the demonstration files delivered with CATIA Solutions products. − The 32-Button box (46086A or A4363A) may be used for CATIA function selection. Users may also select -- Minimum Swap Space: 128 MB CATIA functions using the HP Tablet (refer to above -- The five CADAM Drafting products collectively for references), or the three-button mouse. require 185 MB. − Spaceball (A4360A) provides the same functions as Configuration Requirements Dials: local graphical transformations such as rotation, pan, and zoom. The CADAM Drafting ┌────────────────────────────────────────────┐ products do not support Spaceball. │ HP Workstation Processor Required │ │ Graphics card Required │ − Spacemouse (Magellan) provides the same │ Color graphics display Required │ functions as Dials: local graphical transformations │ Keyboard Required │ │ 3─button mouse or Required │ such as rotation, pan, and zoom. The CADAM │ Graphics Tablet │ Drafting products do not support Spacemouse. │ CD─ROM or tape drive Required* │ ├────────────────────────────────────────────┤ Hardware Requirements in an SGI Environment: CATIA │ * For installation only. │ Solutions Version 4 is designed to operate with the CATIA └────────────────────────────────────────────┘ Motif user interface.
-11- 299-062 Processor Requirements − Indy 8-Bit2 − Indy 24-Bit Any Indy, O2, Indigo2, Octane, Onyx or Onyx2 − Indy XZ workstations based on any R4000, R4400, R4600, R5000, − RE (Reality Engine) R8000, or R10000 processor supported under IRIX 6.2, − RE2 (Reality Engine) IRIX 6.3, IRIX 6.4, or IRIX 6.5 provided that the following − High Impact requirements are met. − Super Solid Impact, or SSI/SSE, − Maximum Impact, or MXI/MXE • Required Processor Components and Features − Solid Impact, or SI/SE − Real memory: A minimum of 64 MB of real memory − InfiniteReality is required; 128 MB of real memory is 2 This is an 8-bit graphics card which presents some recommended to run CATIA Solutions Version 4 in graphic limitations such as poor quality shading or poor a production environment. The real memory visualization on low-lighted elements. They are not requirement may be greater if large or complex recommended for Drafting or other CATIA applications models are to be used. requiring high graphic quality. − An internal or external 4-mm DAT tape drive or Peripheral Requirements CD-ROM drive is required for program installation. • Required Components and Features Installation of CATIA Solutions Version 4 for SGI workstations requires an internal or external 4-mm − SGI three-button mouse or Graphics tablet. tape drive or CD-ROM drive. − An alphanumeric keyboard. A specific keyboard may be required for National Language Support, for This equipment is required to perform an initial example, the Japanese keyboard is required for installation of CATIA Solutions Version 4. The Kanji support. product documentation explains how to install CATIA Solutions Version 4 on other − One display compatible with the listed graphics network-connected SGI workstations after the initial cards. installation with the drive. • Optional Features A CD-ROM is required for the CATIA online documentation in the FrameMaker format. − The SGI 8-Dial box may be used for local graphical transformations such as rotation, pan, and zoom. − Disk space: CATIA Solutions Version 4 licensed CATIA Solutions Version 4 also provides access to programs and configurations, user data, and user these transformations through the use of keyboard programs may be stored on any internal or external functions. disk by the SGI workstation. − The SGI 32-Button box may be used for CATIA Disk space requirements for CATIA Solutions function selection. Users may also select CATIA Version 4 are approximately as follows: functions using the Graphics tablet, or the three-button mouse. -- All installed products of CATIA Solutions Version 4: 700 MB. Refer to the Program − Spaceball provides the same functions as Dials: Directory to estimate disk space requirements local graphical transformations such as rotation, for specific products and configurations. pan, and zoom.
-- Usage environment: 40 MB − Spacemouse (Magellan) provides the same functions as Dials: local graphical transformations -- Administration environment: Up to 100 MB, such as rotation, pan, and zoom. without the demonstration files delivered with CATIA Solutions Version 4 products Hardware Requirements in a Sun Environment: CATIA Solutions Version 4 are designed to operate with the -- Minimum swap space: 128 MB CATIA Motif user interface. Configuration Requirements Processor Requirements ┌────────────────────────────────────────────┐ │ SGI Workstation Processor Required │ Any SPARCstation 20 Model 71, Ultra 1 Creator3D, │ Graphics card Required │ Ultra 2 Creator3D, Ultra10 Creator3D III, Ultra30 │ Color graphics display Required │ Creator3D, or Ultra60 Creator3D Series III/Elite3D │ Keyboard Required │ │ 3─button mouse or Graphics Required │ supported under Solaris 2.6.0 (also called SunOS 5.6.0), │ Tablet │ provided that the requirements described below are met. │ CD─ROM or tape drive Required* │ ├────────────────────────────────────────────┤ • Required Processor Components and Features │ * For installation only. │ └────────────────────────────────────────────┘ − Real memory: A minimum of 64 MB of real memory is required; 128 MB or real memory is recommended to run CATIA Solutions Version 4 in • Required Processor Components and Features — One a production environment. The real memory of the following graphics device adapters: requirement may be greater if large or complex − Entry2 models are to be used. 2 − XS (with optional zbuffer) − An internal or external 4-mm DAT tape drive or − XS/24 (with optional zbuffer) CD-ROM drive is required for program installation. − XZ The tape drive must be compatible with the Sun − Elan model being used: − Extreme − XL -- For UltraSPARC Creator3D workstations, 5 GB − Integrated graphic adapter on O2 workstations 4-mm 68-68 pins SCSI (ref X6251A).
299-062 -12- -- For SPARCstation 20, 5 GB 4-mm 68-68 pins − IBM 74F3131 Four-button Cursor SCSI (ref X6252A). − IBM 74F3143 Serial Cable — 25 pin “D” type The CD-ROM drive must be compatible with the Sun connector model being used: − One of the following three: -- For UltraSPARC Creator3D workstations, -- IBM 6247468 Power Supply — 120 V AC internal CD-ROM (ref X6153A) or external -- IBM 74F3089 Power Supply — 100 V AC CD-ROM (ref X6151A). -- IBM 6247469 Power Supply — 220/240 V AC -- For SPARCstation 20, internal CD-ROM (ref − Generic Serial portgender adapter, 25-pin “D” type X578A) or external CD-ROM (ref X6152A). connector, male-to-male, all connections straight Installation of CATIA Solutions Version 4 for Sun through. workstation requires an internal or external 4-mm − Sun X985A Serial port splitter cable. Required if tape drive or CD-ROM drive. the system is a SPARCstation 20 and the single 25 pin serial connector is already in use. This equipment is required to perform an initial installation of CATIA Solutions Version 4. The − An alphanumeric keyboard. A specific keyboard product documentation explains how to install may be required for National Language Support; for CATIA Solutions Version 4 on other example, the Japanese keyboard is required for network-connected Sun machines after the initial Kanji support. installation with a tape drive. − One display compatible with the graphics cards A CD-ROM is required for the online CATIA listed above. documentation in the FrameMaker format. • Optional Features − Disk space: CATIA Solutions Version 4 licensed − Sun 8-Dial box (ref X190AV4) may be used for local programs and configurations, user data, and user graphical transformations such as rotation, pan, programs may be stored on any internal or external and zoom. CATIA Solutions Version 4 also disk by the Sun machines. provides access to these transformations through the use of keyboard functions. Disk space requirements for CATIA Solutions Version 4 are approximately as follows: − The Sun 32-Button box (ref X180AV4) may be used for CATIA function selection. Users may also select -- All installed products of CATIA Solutions V4: CATIA functions using the tablet (refer to above for 650 MB; refer to the Program Directory to references), or the three-button mouse. estimate disk space requirements for specific products and configurations. − Spaceball provides the same functions as Dials: local graphical transformations such as rotation, -- Usage environment: 40 MB pan, and zoom. -- Administration environment: Up to 100 MB, − Spacemouse (Magellan) provides the same function without the demonstration files delivered with as Dials: local graphical transformations such as CATIA Solutions Version 4 products rotation, pan, and zoom.
-- Minimum Swap Space: 128 MB Hardware Requirements in a Windows NT Environment: Configuration Requirements This topic applies to the CATIA/CADAM Drafting product suite only. ┌────────────────────────────────────────────┐ │ Sun workstation Required │ Processor Requirements │ Graphics card Required │ │ Color graphics display Required │ Any PC utilizing an Intel Pentium , Pentium II, or │ Keyboard Required │ Pentium III or compatible processor. │ 3─button mouse or │ │ Graphics Tablet Required │ • Required Processor Components and Features │ CD─ROM or tape drive Required* │ ├────────────────────────────────────────────┤ − Real memory: A minimum of 32 MB of real memory │ * For installation only. │ └────────────────────────────────────────────┘ is required; 64 MB of real memory is recommended to run in a production environment. The real memory requirement may be greater if large or • Required Processor Components and Features — One complex models are to be used. of the following graphics adapters: − An internal or external CD-ROM drive is required − ZX for SPARCstation 20 for program installation. − Creator3D for Ultra 1, Ultra 2, or Ultra30 − Direct access storage: 100 MB. workstations − Creator3D Series III for Ultra10 or Ultra60 Configuration Requirements workstations − ┌────────────────────────────────────────────┐ Elite3D M3 or M6 for Ultra60 workstations only │ PC with Intel processor Required │ │ Graphics card Required │ Peripheral Requirements │ Color graphics display Required │ │ Keyboard Required │ • Required Components and Features │ 2 or 3─button mouse or Required │ │ Microsoft mouse compatible │ Sun three-button mouse or IBM 5083 or 6093 tablet │ pointing device │ and cursor: │ CD─ROM Required* │ ├────────────────────────────────────────────┤ − IBM 74F3130 Cursor Pad Tablet (8.144-inch x │* For installation only. │ 10.44-inch) └────────────────────────────────────────────┘
-13- 299-062 Peripheral Requirements • CATIA.Knowledge Engineering (5626-CKE) — Requires XL FORTRAN for AIX, Version 5.1.0 or 5.1.1 • An SVGA graphics card with a minimum of 2 MB or (5801-AAR-7069, part number 04L2110). video RAM • CATIA.IGES Interface (5626-IGI) and CATIA.IGES MIL • A Windows NT compatible mouse or any pointing Standard 28000 (5626-IGC) — Require IBM IGES device that emulates a Windows NT compatible mouse Processor for AIX Version 2.3 (5765-083), or later releases. • An alphanumeric keyboard. A specific keyboard may be required for National Language Support; for Notes example, the Japanese keyboard is required for Kanji support. − IGES installation under AIX V4 requires the following file set: Base Application Development • One display compatible with a supported graphics Math Library (bos.adt.libm). card. − CATIA.IGES Integrated Interface (5626-IGS) has no Software Requirements requirement on IBM IGES Processor because CATIA.IGES Integrated Interface imbeds the IGES Note: References to “CADAM Drafting products” apply to translation software. the CATIA/CADAM Drafting product suite: − When CATIA.IGES Integrated Interface and • CADAM Drafting (5626-CCD) CATIA.IGES Interface are both installed and • CADAM IUE (5626-IUE) configured, the selection of CATIA.IGES Integrated • CATIA/CADAM 2D Markup and Annotation (5626-MU2) Interface software is performed at run time. • CATIA/CADAM MCX Translator (5626-MCX) • CATIA.CATIA/CADAM Coupler (5626-CCC) • CATIA/CADAM Hybrid Raster (5626-RAS) For CCD to workstation CATIA (NETWORK) transfer: These products run on the IBM RS/6000 AIX, CCD Version 4 Release 1.9 and CCD Access — IUE Hewlett-Packard HP-UX, and Windows NT platforms, but Version 4 Release 1.9 and up. not on the Sun Microsystems or Silicon Graphics UNIX platforms. Note: Effective with CATIA/CADAM Solutions Version 4, Release 2.1, Release 1.8 of CCD and IUE Software Requirements in the AIX environment: CATIA are no longer supported. Solutions Version 4 is designed to operate with the following system software: For host CADAM and workstation CATIA client/server transfer, IBM TCP/IP, Version 3.2 and up, is required. • AIX Version 4 Release 3.0, Release 3.1, or Release 3.2.3 For workstation CATIA reading and writing NURESTOR files, no additional software is necessary. • XL FORTRAN Runtime Environment for AIX, Version 5.1.0 or 5.1.1 (5801-AAR-7070, part number For workstation CATIA reading and writing 04L2123) CCD/PCADAM native model, no additional software is necessary. • IBM PEX and PHIGS: delivered in addition to OpenGL and GL libraries with AIX 4.3. • CATIA.Data Management Run-Time (5626-CDR) requires one of the following products: • IBM C and C++ Compiler for AIX, (5801-AAR-5270, part number 04L3535), at minimum level 3.6.2 for AIX − In the AIX environment, DB2 Universal Database 4.3.0 and minimum level 3.6.4 for AIX 4.3.1 or AIX 4.3.2, for AIX Version 5.0 (single user, server, or server is required to run CATIA Solutions Version 4. A plus additional users) or DB2 /6000 Version 2.1 permanent license, if needed, must be purchased for VisualAge C++ Professional for AIX, Version 4 or (5765-D52, part number 30L8178), which includes the − In a UNIX Database network environment DB2 new VisualAge incremental C++ compiler and IBM C Universal Database for AIX Version 5.0 and IBM and C++ batch compilers, V3.6.4. DB2 Connect Enterprise Edition for AIX 3 Refer to RETAIN and/or the CATIA Version 4 Release 2.1 Version 5.0 (formerly known as DDCS Multi-User Program Directory for the appropriate AIX PTFs to be Gateway) or DB2/6000 Version 2.1 and DDCS for applied. AIX Version 2.3 Multi-User Gateway.
Specific Software Requirements for AIX: The following Note: Both DB2 Universal Database and DB2 software products (and their prerequisites) at the Connect are available in different languages. specified minimum level are required for specific CATIA Contact you local IBM support to order the Solutions licensed programs: appropriate part number. • CATIA.Graphics Interactive Interface (5626-GII) or requires: − DB2 V3 with PUT 1994 on an enterprise server with CATIA.Distributed Services (5626-CDS) and their − XL FORTRAN for AIX, Version 5.1.0 or 5.1.1 (5801-AAR-7069, part number 04L2110) prerequisites. or − IBM C and C++ Compiler for AIX (5801-AAR-5270, part number 04L3535), at minimum level 3.6.2 for − ORACLE Version 7.3.4 or ORACLE Version 8.0.4 AIX 4.3.0 and minimum level 3.6.4 for AIX 4.3.1 or Relational Database Management System (RDBMS) AIX 4.3.2, is required to run CATIA Solutions server with the following ORACLE feature PRO*C Version 4. A permanent license, if needed, must Version 2.2. be purchased for VisualAge C++ Professional for AIX, Version 4 (5765-D52, part number 30L8178), or which includes the new VisualAge incremental C++ compiler and IBM C and C++ batch compilers, V3.6.4.
299-062 -14- − In a UNIX Database network environment ORACLE • CATIA.Assembly Modeling (5626-ASS) — Requires Version 7.3.4 or ORACLE Version 8.0.4 with OpenGL and GL 3.2 (OpenGL and GL 3.2 are delivered SQL*NET Version 2 and TCP/IP interface. with AIX 4.3.) Note: For installation purposes, XL FORTRAN for • CATIA.CDM-PM Integration (5626-CDP) requires: AIX, Version 5.1.0 or 5.1.1 (5801-AAR-7069, part number 04L2110) and IBM C and C++ Compiler − Server: ProductManager Director Version 3.2.0 at for AIX (5801-AAR-5270, part number 04L3535), at service level SNAP/SHOT A or B. The product minimum level 3.6.2 for AIX 4.3.0 and minimum number is level 3.6.4 for AIX 4.3.1 or AIX 4.3.2, are required. -- 5765-605 on an AIX server A permanent license, if needed, must be purchased -- 5765-606 on an HP server for VisualAge C++ Professional for AIX, -- 5765-607 on a Sun server Version 4 (5765-D52, part number 30L8178) which includes the new VisualAge incremental C++ Note: The ProductManager server can be only an compiler and C and C++ batch compilers, V3.6.4. AIX, HP, or Sun server. • — — CATIA.Data Management Access (5626-CDA) − Client: ProductManager Software Development Kit When compiling assembly structures for the Assembly (SDK) compatible with the service level Navigator, the following are required: SNAP/SHOT A or B and the operating system on − XL FORTRAN for AIX, Version 5.1.0 or 5.1.1 which CATIA.CDM-PM Integration Product will be (5801-AAR-7069, part number 04L2110) run. − C and C++ Compiler for AIX (5801-AAR-5270, part • CATIA.Scientific Presentation Manager (5626-SPM) — number 04L3535) at minimum level 3.6.2 for AIX If Scientific Presentation Manager does not require 4.3.0 and minimum level 3.6.4 for AIX 4.3.1 or AIX OpenGL and GL 3.2, the CATSPM utility, delivered with 4.3.2. A permanent license, if needed, must be this product, requires it. (OpenGL and GL 3.2 are purchased for VisualAge C++ Professional for delivered with AIX Version 4 Release 3). This AIX, Version 4 (5765-D52, part number 30L8178) prerequisite does not impact ANVISU function. which includes the new VisualAge incremental • C++ compiler and IBM C and C++ batch CATIA/CADAM Product Suite compilers, V3.6.4. − graPHIGS PTF U458977 (APAR IX81851) is • CATIA.Conferencing Groupware (5626-CGW) — mandatory for correct hard copy function. Requires other vendors′ products to support audio, − CADAM Drafting (5626-CCD) is the required base video, and the 2D Whiteboard. For CATIA Version 4, for CADAM IUE (5626-IUE), CATIA/CADAM MCX Release 2.1, the only complementary solution Translator (5626-MCX), and CATIA/CADAM Hybrid available is MDL Corporation′s Communique! for CATIA. Customers can obtain keys to the Raster (5626-RAS). CATIA/CADAM 2D Markup and Communique! for CATIA plug-in by contacting the MDL Annotation (5626-MU2) is a stand-alone product. Corporation: − All CADAM Drafting products in a given system MDL Corporation must be at the same version, release, and 14940 NE 95th Street modification level, unless specifically announced Redmond, WA, 98052 otherwise. 800-800-3766 • Plotter Support The MDL Web site is: CATIA provides drivers for widely used plotter http://www.mdlcorp.com languages: • CATIA.ANSYS Interface (5626-ANS) — Requires − IBM-GL, support for which is included in AIX ANSYS Version 5.0A or 5.2. − CalComp C9074 • CATIA.NASTRAN Interface (5626-NAS) — Requires − ′ MSC/NASTRAN Release 67, or later. Hewlett-Packard: HP-GL/2 (Hewlett-Packard s Graphics Language/2) • CATIA.Lathe (5626-TUR) and CATIA.Multiple Axis − Milling (5626-NC5) — may require the following: OCE Graphics GPR50: VDF Plotting Routines for RS/6000 (program number 501400659)4 − APTWS/6000 (5765-002) − NCPG/6000 (5765-020) − Versatec − NCPGXL/6000 (5765-003) -- VCGL (Versatec Color Graphics Language): • CATIA.4D Navigator (5626-N4D) — Requires OpenGL Versatec Graphics Software (VGS) 2.0 for and GL 3.2 (OpenGL and GL 3.2 are delivered with RS/6000 (b) AIX 4.3). -- VRF (Versatec Random Format): Versatec Graphics Software (VGS) 2.0 for RS/6000 (b) • CATIA.Visualization Studio (5626-VST), CATIA.Realistic 4 Rendering (5626-REN) and Includes a configuration file used at run time. CATIA.Engraving/Embossing (5626-ENG) — These products include the image viewer component that Note: Customers should contact the appropriate offers the best graphic performance and highest plotter vendor for plotter connection and plotter visualization with OpenGL and GL 3.2 (OpenGL and support. GL 3.2 are delivered with AIX 4.3). • DBCS Support Requirements Note: If OpenGL is not installed, the image viewer − No additional software is required with Motif CATIA switches into X11 mode. Notice that even if the user interface. visualization is somewhat degraded when using X11, all functions remain available and saved images are correct.
-15- 299-062 • Supported Languages Notes Customer-written programs developed using CATIA − CATIA.IGES Integrated Interface (5626-IGS) has no APIs can be written in the following languages: requirement on the IBM IGES Processor because CATIA.IGES Integrated Interface imbeds the IGES − IBM XL C requires IBM C and C++ Compiler for translation software. AIX (5801-AAR-5270, part number 04L3535) at − When CATIA.IGES Integrated Interface and minimum level 3.6.2 for AIX 4.3.0 and minimum CATIA.IGES Interface are both installed and level 3.6.4 for AIX 4.3.1 or AIX 4.3.2. A permanent configured, the selection of CATIA.IGES Integrated license, if needed, must be purchased for VisualAge Interface software is performed at run time. C++ Professional for AIX, Version 4 (5765-D52, • Part Number 30L8178) which includes the new CATIA.CATIA/CADAM Coupler (5626-CCC) VisualAge incremental C++ compiler and IBM C For CCD to workstation CATIA (NETWORK) transfer and C++ batch compilers, V3.6.4. − CCD Version 4 Release 1.9 and CCD Access: IUE − IBM XL FORTRAN requires XL FORTRAN for AIX, Version 4 Release 1.9 and up. Version 5.1.0 or 5.1.1 (5801-AAR-7069, part number 04L2110). Note: Effective with CATIA/CADAM Solutions Version 4, Release 2.1, Release 1.8 of CCD and Note: The FORTRAN Runtime Environment is IUE is no longer supported. included in the FORTRAN compiler and does not need to be ordered separately. For Host CADAM and workstation CATIA client/server transfer, IBM TCP/IP, Version 3.2 and up, is required. Software Requirements in the HP Environment: CATIA For workstation CATIA reading and writing NURESTOR Solutions Version 4 is designed to operate with the files, no additional software is necessary. following system software:
• 5 For workstation CATIA reading and writing HP-UX 10.20 A.C.E. CCD/PCADAM native model, no additional software is • ANSI C++ (a C++) Runtime Environment (delivered necessary. with HP-UX 10.20 A.C.E.) • CDM-PM Integration (5626-CDP) — Requires: • FORTRAN runtime − Server: ProductManager Director Version 3.2.0 at • CDE, Common Desktop Environment, is the supported service level SNAP/SHOT A or B. The product desktop environment; the VUE desktop environment is numbers are: no longer supported -- 5765-605 on an AIX server • HP-PHIGS runtime environment (not required for the -- 5765-606 on an HP server Drafting products) -- 5765-607 on a Sun server • PEX runtime environment (not required for the Drafting Note: The ProductManager server can be only an products) AIX, HP, or Sun server. − • Powershade (not required for the Drafting products) Client: ProductManager Software Development Kit (SDK) compatible with service level SNAP/SHOT A Notes or B and the operating system on which CATIA.CDM-PM Integration Product will be run. • ANSI C++ (a C++) runtime libraries are delivered • — — with the operating system. CATIA.Data Management Run Time (5626-CDR) Requires: • The FORTRAN runtime environment required by − Either ORACLE Version 7.3.4 or ORACLE CATIA is delivered with the operating system. Version 8.0.4 Relational Database Management • PEX runtime environment is delivered with the System (RDBMS) server with the following ORACLE operating system. feature PRO*C Version 2.2 • Powershade is included when Graphics Adapter is or ordered. − DB2 Universal Database for HP-UX Version 5.0 5 Refer to RETAIN and/or the CATIA Version 4 Release 2.1 (contact your IBM local support to order the Program Directory for the appropriate PTF to be applied. appropriate part number) or DB2 for HP-UX Version 2.2. Specific Software Requirements for HP: The following or software products (and their prerequisites) at the specified minimum level are required for specific CATIA − In a UNIX Database network environment, DB2 Solutions licensed programs: Universal Database for HP-UX Version 5.0 and DB2 Connect Enterprise Edition for AIX Version 5.0 • CATIA.Knowledge Engineering (5626-CKE) — Requires (formerly known as DDCS Multi-User Gateway) on HP-UX FORTRAN/9000 Compiler (B3907AA). an AIX system acting as a gateway (contact your IBM local support to order the appropriate part • — CATIA.Graphics Interactive Interface (5626-GII) number) or DB2 for HP-UX Version 2.2 and DDCS Requires HP-UX FORTRAN/9000 Compiler (B3907AA) for AIX Version 2.3 Multi-User Gateway. and HP-UX C/ANSI C Compiler (B3899AA). or • CATIA.IGES Interface (5626-IGI) and CATIA.IGES MIL Standard 28000 (5626-IGC) — Requires IBM IGES − In a UNIX Database network environment, ORACLE Processor for HP Version 2.3 (5765-083), or later Version 7.3.4 or Version 8.0.4 with SQL*NET releases. Version 2 and TCP/IP interface. or
299-062 -16- − DB2 V3 with PUT 1994 on an enterprise server with − Hewlett-Packard: HP-GL/2 (Hewlett-Packard′s CATIA.Distributed Services (5626-CDS) and their Graphics Language/2) prerequisites. − OCE Graphics GPR50: VDF Plotting Routines6 − Versatec Note: For installation purposes, HP-UX -- VCGL (Versatec Color Graphics Language): FORTRAN/9000 and HP-UX/ANSI C (B3907AA and Versatec Graphics Software (VGS) 2.06 B3899AA) are required. -- VRF (Versatec Random Format): VGS 2.06 • CATIA.Data Management — Access (5626-CDA) — 6 Includes a configuration file used at run time Requires for Assembly Navigator, when compiling assembly structures, HP-UX FORTRAN/9000 and Note: Customers should contact the appropriate HP-UX ANSI C++ compilers (B3807AA and B3911AB). plotter vendor for plotter connection and plotter support. • CATIA.Conferencing Groupware (5626-CGW) — Requires other vendors′ products to support audio, • Supported Languages video, and the 2D Whiteboard. For CATIA Version 4, Release 2.1, the only complementary solution Customer-written programs developed using CATIA available is MDL Corporation′s Communique! for APIs can be written in the following languages: CATIA. Customers can obtain keys to the − HP-UX C/ANSI C (B3899AA) Communique! for CATIA plug-in by contacting the MDL − HP-UX FORTRAN/9000 (B3907AA) Corporation: Linkage of executables using CATIA APIs (executables MDL Corporation linked with CATGEO command) requires HP-UX ANSI 14940 NE 95th Street C++ (a C++ product, B3910BA). Redmond, WA, 98052 800-800-3766 Note: Executables created with CATIA APIs on levels prior to and including CATIA Solutions Version 4 The MDL Web site is: Release 1.8 should be relinked with CATIA Solutions http://www.mdlcorp.com Version 4 Release 2.1 procedures. • CATIA.ANSYS Interface (5626-ANS) — Requires Software Requirements in the SGI Environment: CATIA ANSYS Version 5.0A or 5.2. Solutions Version 4 is designed to operate with the following system software: • CATIA.NASTRAN Interface (5626-NAS) — requires MSC/NASTRAN Release 67, or later. • IRIX 6.27 IRIX 6.37, IRIX 6.47, or IRIX 6.57 • CATIA.4D Navigator (5626-N4D) — Requires OpenGL • C, C++, FORTRAN 77 Runtime Environment for HP-UX Runtime Libraries, Version 1.1. Version 7.2.1. The Execution Environments for C, • CATIA.Assembly Modeling (5626-ASD) — Assembly C++ and FORTRAN 77 are delivered with IDF (IRIX function requires OpenGL for HP-UX Runtime Development Fundations) and IDL (IRIX Development Libraries, Version 1.1. Libraries). IDF and IDL are packaged with the IRIX Foundation (base operating system) for IRIX 6.5. For • CATIA.Visualization Studio (5626-VST), CATIA.Realistic IRIX 6.2, 6.3, and 6.4, IDF and IDL are packaged with Rendering (5626-REN), CATIA.Engraving/Embossing the compiler products. For current users of IRIX 6.2, (5626-ENG) — These products include the image viewer 6.3, and 6.4 who have not licensed a copy of IDO, an component that offers the best graphic performance IDF CD and an IDL CD can be ordered free of charge and highest visualization with OpenGL. by calling 800-770-3033 or by sending a request to: • — CATIA.Scientific Presenation Manager (5626-SPM) If [email protected] Scientific Presentation Manager does not require OpenGL for HP-UX Runtime Libraries Version 1.1, the • Link editing applications based on CATIA APIs or CATSPM utility, delivered with this product, requires installation of the CATIA API Library (libgeo.a) require it. This prerequisite does not impact ANVISU function. IDL and IDF. • CATIA/CADAM Drafting Product Suite Note: IRIX system software delivers the C++ runtime − HP-UX Patch PHSS_11392 is mandatory. and FORTRAN runtime required by CATIA. 7 − The HP-PHIGS runtime environment, PEX runtime Refer to RETAIN or the CATIA Version 4 Release 2.1 environment, and Powershade are not required to Program Directory for the appropriate PTFs to be applied. run the CADAM Drafting products. Specific Software Requirements for SGI: The following − CADAM Drafting (5626-CCD) is the required base software products (and their prerequisites) at the for CADAM IUE (5626-IUE), CATIA/CADAM MCX mentioned minimum level are required for specific CATIA Translator (5626-MCX), and CATIA/CADAM Hybrid Solutions licensed programs: Raster (5626-RAS). CATIA/CADAM 2D Markup and Annotation (5626-MU2) is a stand-alone product. • CATIA.Knowledge Engineering (5626-CKE) — Requires SGI MIPSpro FORTRAN 77 Compiler Version 7.2.1. − All CADAM Drafting products in a given system must be at the same version, release, and This compiler must be used with the following options: modification level, unless specifically announced otherwise. f77 -Wf, -noappend • Plotter Support External libraries containing FORTRAN code and which are linked with CATIA code must be defined with ELF CATIA provides drivers for widely used plotter format; the only supported Application Binary Interface languages: is ABI o32 (FORTRAN compiler is delivered with the − IBM-GL IDO product). − CalComp C9076
-17- 299-062 • CATIA.Graphics Interactive Interface (5626-GII) — − DB2 V3 with PUT 1994 on an enterprise server with Requires SGI MIPSpro FORTRAN 77 Compiler CATIA.Distributed Services (5626-CDS) and their Version 7.2.1. This compiler must be used with the prerequisites. following options: Note: For installation purposes, SGI MIPSpro f77 -Wf, -noappend FORTRAN 77 Version 7.2.1 and SGI MIPSpro C Compiler Version 7.2.1 are required (delivered with External libraries containing FORTRAN code and linked IDO product). with CATIA code must be defined with ELF format and require SGI MIPSpro C compiler Version 7.2.1. The • CATIA.Data Management — Access (5626-CDA) — only supported Application Binary Interface is ABI o32 Requires for Assembly Navigator, when compiling (FORTRAN and C compilers are delivered with IDO assembly structures, SGI MIPSpro FORTRAN 77, product). Version 7.2.1 and SGIMIPSpro C++ Compiler, Version 7.2.1 (delivered with IDO product). • CATIA.IGES Interface (5626-IGI) and CATIA.IGES MIL Standard 28000 (5626-IGC) — Require the IBM IGES • CATIA.Conferencing Groupware (5626-CGW) — Processor for SGI Version 2 Release 3. Requires other vendors′ products to support audio, video, and the 2D Whiteboard. For CATIA Version 4, Notes Release 2.1, the only complementary solution ′ − CATIA.IGES Integrated Interface (5626-IGS) has no available is MDL Corporation s Communique! for requirement on the IBM IGES Processor because CATIA. Customers can obtain keys to the CATIA.IGES Integrated Interface imbeds the IGES Communique! for CATIA plug-in by contacting the MDL translation software. Corporation: − When CATIA.IGES Integrated Interface and MDL Corporation CATIA.IGES Interface are both installed and 14940 NE 95th Street configured, the selection of CATIA.IGES Integrated Redmond, WA, 98052 Interface software is performed at run time. 800-800-3766 • CATIA.CATIA/CADAM Coupler (5626-CCC) The MDL Web site is: For Host CADAM and workstation CATIA client/server http://www.mdlcorp.com transfer, IBM TCP/IP, Version 3.2 and up, is required. • CATIA.ANSYS Interface (5626-ANS) — Requires ANSYS Version 5.0A or 5.2. For workstation CATIA reading and writing NURESTOR files, no additional software is necessary. • CATIA.NASTRAN Interface (5626-NAS) — Requires MSC/NASTRAN Release 67, or later. For workstation CATIA reading and writing CCD/PCADAM native models, no additional software • Plotter Support is necessary. CATIA provides drivers for widely used plotter • CDM-PM Integration (5626-CDP) — Requires: languages: − Server: ProductManager Director Version 3.2.0 at − IBM-GL service level SNAP/SHOT A or B. The product − CalComp C9078 numbers are: − Hewlett-Packard: HP-GL/2 (Hewlett-Packard′s Graphics Language/2) -- 5765-605 on an AIX server − OCE Graphics GPR50: VDF Plotting Routines8 -- 5765-606 on an HP server − Versatec -- 5765-607 on a Sun server -- VCGL (Versatec Color Graphics Language): 8 Note: The ProductManager server can be only an VGS 2.0 8 AIX, HP or Sun server. -- VRF (Versatec Random Format): VGS 2.0 − Client: ProductManager Software Development Kit 8 Includes a configuration file used at run time. (SDK) compatible with service level SNAP/SHOT A or B and the operating system on which Note: Customers should contact the appropriate CATIA.CDM-PM Integration Product will be run. plotter vendor for plotter connection and plotter support. • CATIA.Data Management — Run Time (5626-CDR) — Requires: • Supported Languages − Either ORACLE Version 7.3.4 or ORACLE Customer-written programs developed using CATIA Version 8.0.4 Relational Database Management APIs can be written in the following languages: System (RDBMS) server with the following ORACLE − SGI MIPSpro C Compiler, Version 7.2.1 feature: PRO*C Version 2.2 − SGI MIPSpro FORTRAN 77 Compiler, Version 7.2.1 or Note: For both FORTRAN and C, the only supported − In a UNIX Database network environment, ORACLE Application Binary Interface is ABI o32. Version 7.3.4 Software Requirements in the Sun Environment: CATIA or Solutions Version 4 is designed to operate with the − ORACLE Version 8.0.4 with SQL*NET Version 2 and following system software: TCP/IP interface. • Solaris 2.6.09 or • Common Desktop Environment (CDE) 1.2
299-062 -18- • FORTRAN 4.2 runtime required by CATIA is delivered Note: The ProductManager server can be only an with CATIA Solutions Version 4. AIX, HP, or Sun server. • SunPHIGS runtime required by CATIA is delivered with − Client: ProductManager Software Development Kit CATIA Solutions Version 4. (SDK) compatible with service level SNAP/SHOT A or B and the operating system on which Note: The C++ runtime environment is delivered with CATIA.CDM-PM Integration Product will be run. the operating system. • — 9 CATIA.Data Management Run Time Product Refer to RETAIN and/or the CATIA Version 4 Release 2.1 (5626-CDR) — Requires Program Directory for the appropriate PTFs to be applied. − ORACLE Version 7.3.4 or Version 8.0.4 Relational Specific Software Requirements for Sun: The following Database Management System (RDBMS) server software products (and their prerequisites) at the with ORACLE feature PRO*C Version 2.2 specified minimum level are required for specific CATIA or Solutions licensed programs: − DB2 Universal Database for Solaris Version 5.0 (contact your IBM local support to order the • CATIA.Knowledge Engineering Product (5626-CKE) — appropriate part number) or DB2 for Solaris Requires Sun WorkShop Compiler FORTRAN 4.2. This environment Version 2.2. compiler has to be used with the following option: or f77 -ext_names=plain -Qoption f77pass1 -rvsub − In a UNIX Database network environment, DB2 Universal Database for Solaris, Version 5.0 and -ext_names for suppression of underscore after each DB2 Connect Enterprise Edition for AIX Version 5.0 external referenced CALL. (formerly known as DDCS Multi-User Gateway), on an AIX system acting as a gateway (contact your -rvsub for the RETURN 0 ... RETURN 4 return numeric IBM local support to order the appropriate part value to the C language caller support. number) or DB2 for Solaris environment • CATIA.Graphics Interactive Interface Product Version 2.2 and DDCS for AIX Version 2.3 (5626-GII) — Requires Sun WorkShop Compiler Multi-User Gateway. FORTRAN 4.2. This compiler has to be used with the or − following option: In a UNIX Database network environment ORACLE Version 7.3.4 or ORACLE Version 8.0.4 with f77 -ext_names=plain -Qoption f77pass1 -rvsub SQL*NET Version 2 and TCP/IP interface or -ext_names for suppression of underscore after each − DB2 V3 with PUT 1994 on an enterprise server with external referenced CALL. CATIA Distributed Services (CDS) and their prerequisites -rvsub for the RETURN 0 ... RETURN 4 return numeric value to the C language caller support and requires Note: For installation purposes, Sun WorkShop the C Compiler. Compiler, FORTRAN 4.2, and Sun WorkShop Compiler • CATIA.IGES Interface Product (5626-IGI) and C 4.2 are required. CATIA.IGES MIL Standard 28000 (5626-IGC) — Require • CATIA.Data Management — Access (5626-CDA) — IBM IGES Processor for Sun Version 2 Release 3. Requires for the Assembly Navigator, when compiling assembly structures, FORTRAN and C++ Compilers. Notes • CATIA.Conferencing Groupware (5626-CGW) — • CATIA.IGES Integrated Interface (5626-IGS) has no Requires other vendors′ products to support audio, requirement on IBM IGES Processor because video, and the 2D Whiteboard. For CATIA Version 4, CATIA.IGES Integrated Interface imbeds the IGES Release 2.1, the only complementary solution translation software. available is MDL Corporation′s Communique! for • When CATIA.IGES Integrated Interface and CATIA. Customers can obtain keys to the CATIA.IGES Interface are both installed and Communique! for CATIA plug-in by contacting the MDL configured, the selection of CATIA.IGES Integrated Corporation: Interface software is performed at run time. MDL Corporation • CATIA.CATIA/CADAM Coupler (5626-CCC) 14940 NE 95th Street Redmond, WA 98052 For Host CADAM and workstation CATIA client/server 800-800-3766 transfer, IBM TCP/IP, Version 3.2 and up, is required. The MDL Web site is: For workstation CATIA reading and writing NURESTOR http://www.mdlcorp.com files, no additional software is necessary. • CATIA.ANSYS Interface Product (5626-ANS) — For workstation CATIA reading and writing Requires ANSYS Version 5.0A or 5.2. CCD/PCADAM native models, no additional software is necessary. • CATIA.NASTRAN Interface (5626-NAS) — Requires MSC/NASTRAN Release 67, or later. • CDM-PM Integration (5626-CDP) requires: • CATIA.4D Navigator (5626-N4D) — Requires OpenGL − Server: ProductManager Director Version 3.2.0 at for Solaris Runtime Libraries, Version 1.1 (OpenGL is service level SNAP/SHOT A or B. The product delivered with Solaris 2.6.0). numbers are: • CATIA.Assembly Modeling (5626-ASD) — Requires -- 5765-605 on an AIX server OpenGL for Solaris Runtime Libraries, Version 1.1 -- 5765-606 on an HP server (OpenGL is delivered with Solaris 2.6.0). -- 5765-607 on a Sun server
-19- 299-062 • CATIA.Visualization Studio (5626-VST), CATIA.Realistic − CATIA.Distributed Services (5626-CDS) is required Rendering (5626-REN), CATIA.Engraving/Embossing for CATIA.Visualization Studio (5626-VST) when (5626-ENG) — These products include the image viewer used on several nodes in parallel processing mode. component that offers the best graphic performance and highest visualization with OpenGL for Solaris − CATIA.4D Navigator(5626-N4D) is required for Runtime Libraries, Version 1.1. OpenGL is delivered CATIA.Conferencing Groupware (5626-CGW) to with Solaris 2.6.0. allow multiple users to share a 4D Navigator session over a network. • — CATIA.Scientific Presentation Manager (5626-SPM) • Even if the Scientific Presentation Manager does not In CATIA Mechanical Solutions: require OpenGL for Solaris Runtime Libraries, − CATIA.Library (5626-LIB) and CATIA.Feature Based Version 1.1 of the CATSPM utility, delivered with this Design (5626-FEA) are required for product, requires it (OpenGL is delivered with Solaris CATIA.Sheetmetal Design (5626-SHE) when use of 2.6.0). This prerequisite does not impact ANVISU a customer defined catalog of features is required. function. − CATIA.Composites Covering (5626-COV) is required • Plotter Support for:
CATIA provides drivers for widely used plotter -- CATIA.Generative Composites Covering languages: (5626-GCC) − IBM-GL -- CATIA.Generative Composite Tape Design − CalComp C90710 (5626-GCT) ′ − Hewlett-Packard: HP-GL/2 (Hewlett-Packard s • In CATIA Manufacturing Solutions: Graphics Language/2) − OCE Graphics GPR50: VDF Plotting Routines10 − CATIA.Manufacturing Infrastructure (5626-NCB) is − Versatec required for: -- VCGL (Versatec Color Graphics Language): Versatec Graphics Software (VGS) 2.010 -- CATIA.Prismatic Machining Programmer -- VRF (Versatec Random Format): Versatec (5626-PMP) Graphics Software (VGS) 2.010 -- CATIA.Milling Analysis (5626-MAA) -- CATIA.Multiple Axis Milling (5626-NC5) 10 Includes a configuration file used at run time. -- CATIA.Nesting (5626-NES) -- CATIA.Lathe (5626-TUR) Note: Customers should contact the appropriate -- CATIA.Mold & Die Machining Assistant plotter vendor for plotter connection and plotter (5626-MAD) support. -- CATIA.Prismatic Machining Assistant • Supported languages (5626-PMA) -- CATIA.Post Processor Builder (5626-PPB) Customer-written programs developed using CATIA -- CATIA.Toolshop Access Product (5626-TSA) APIs can be written in the following languages: -- CATIA.Inspection Planning Assistant (5626-IPA) -- CATIA.Multi-Axis Machining Programmer − Sun WorkShop Compiler C 4.2 (5626-MMP) − Sun WorkShop Compiler FORTRAN 4.2 -- CATIA.Surface Machining Programmer (5626-SMP) CATIA Prerequisites for the UNIX Environment: The -- CATIA.Lathe Machining Programmer Products following CATIA Solutions products have specific CATIA (5626-LMP) prerequisites: − • CATIA.Multiple Axis Milling (5626-NC5) is required Normally, CATIA.Object Manager (5626-COM) is for CATIA.Rough Cutting Product (5626-NCR). required for all CATIA products except CATIA.Viewing Services (5626-CVS) and CATIA.Data Management • In CATIA Analysis & Simulation Solutions: Products — Run Time (5626-CDR). − CATIA.Analysis Infrastructure (5626-ANI) is • In CATIA Application Architecture Solutions: required for:
− CATIA.Viewing Services (5626-CVS) can be -- CATIA.Finite Element Modeler (5626-FEM) substituted for the CATIA.Object Manager -- CATIA.ELFINI Solver (5626-ELF) (5626-COM) product as a prerequisite for the -- CATIA.Scientific Presentation Manager following products: (5626-SPM) -- -- CATIA.CATIA/CADAM Coupler (5626-CCC) CATIA.ANSYS Interface (5626-ANS) -- CATIA.Distributed Services (5626-CDS) -- CATIA.NASTRAN Interface (5626-NAS) -- CATIA.Data Management — Access (5626-CDA) -- CATIA.Assembly and Substructure Anaylsis -- CATIA.IGES Interface (5626-IGI) Product (5626-ASA) -- CATIA.IGES Military Standard 28000 (5626-IGC) − CATIA.3D Parametric Variational Modeler -- CATIA.IGES Integrated Interface (5626-IGS) (5626-PA3) and CATIA.Generative Part Stress − CATIA.Data Management Products — Run Time Analysis (5626-GPS) are required for (5626-CDR) is required for: CATIA.Generative Part Optimization (5626-GPO).
-- CATIA.Data Management — Build-time − CATIA.Generative Part Stress Analysis (5626-GPS) (5626-CDB) is required for CATIA.Generative Part Dynamic -- CATIA.Data Management — Access (5626-CDA) Analysis (5626-GPD). − CATIA.Data Management — Access (5626-CDA) is − The ELFINI-based products, CATIA.ELFINI Solver required for: (5626-ELF) and CATIA.Generative Part Stress Analysis (5626-GPS), require additional licenses of — -- CATIA.Data Management Library (5626-LIC) 5626-ELF or 5626-GPS products to take advantage -- CATIA.CDM-PM Integration (5626-CDP) of parallel solving capabilities on the
299-062 -20- multi-processor hardware that support them. Each Installability and Maintainability: On workstations, the additional license gives the right to deploy up to CATIA products are delivered either in the currently used four additional processors. media or in CD-ROM, including documentation. • In CATIA Shape Design & Styling Solutions: Installability of CATIA/CADAM Solutions Version 4 is designed so that customers can install the system, − CATIA.3D Wireframe (5626-WF3), CATIA.Surface customize it, and get started with little manual Design (5626-SUD) and CATIA.Advanced Surface intervention and minimum skill within two hours. Design (5626-ASU) are required for CATIA.Generative Shape Modeling (5626-GSM). For preventive service, new modification levels of CATIA − CATIA.Form Design Product (5626-FRF) is required are available two times per year. These new levels are for CATIA.Generative Shape Modeling (5626-GSM) cumulative, containing all corrective and preventive only when needed for creating and managing service available to date. Refreshes are also delivered blends. every three months for the current modification level. − CATIA.Advanced Surface Design (5626-ASU), Support for Workstation CATIA Version 4 Release 1.9 will CATIA.Surface Design (5626-SUD), CATIA.3D end when CATIA Version 4 Release 2.2 becomes Wireframe (5626-WF3) and CATIA.Generative available. Shape Modeling (5626-GSM) are required for CATIA Version 4 Release 1.8 for workstations is no CATIA.Body in White Templates (5626-BWT). longer supported, effective immediately. − CATIA.Generative Shape Modeling (5626-GSM) prerequisites are required for The maintenance process remains unchanged for CATIA CATIA.SDS.Generative Body in White Add-on Version 4 Release 2.1. PTFs are delivered for severe Configuration (5626-GBW), if not already included problems only. CATIA Version 4 Release 1.9 and in the stand-alone configuration to which 5626-GBW subsequent CATIA releases will be supported for at least is added. 18 months after their planned availability date. The following media are available for maintenance: Optional Software for the UNIX Environment: CATIA can be run with either concurrent or nodelocked licensing. • Refresh PTFs The tool that supports nodelocked licensing is IBM License Use Management (LUM). Effective with CATIA − AIX: 4-mm, 8-mm, and CD-ROM Version 4, Release 2.1, License Power/iFOR (iFOR/LS) − HP-UX: 4-mm and CD-ROM is no longer supported. The minimum level of LUM − SGI: 4-mm and CD-ROM required is IBM LUM Runtime, Version 4.0. Refer to the − Sun: 4-mm and CD-ROM Planning Information section for further details. • Single PTFs Software Requirements for the Windows NT CCSS permits the user to order single PTFs on Environment: This topic applies only to the CADAM CD-ROMs. Single PTFs will be available on the same Drafting product suite. media as refresh PTFs. In addition, CATIA AIX Single PTFs (and ONLY the CATIA AIX PTFs) can be obtained The basic operating system requirement is Microsoft from FIXDIST on the Internet. The address is: Windows NT 4.0 with Service Pack 3 or Service Pack 4 applied. Microsoft requires Service Pack 4 to ensure full http://service.software.ibm.com/catia Year 2000 ready support. Compatibility: Across all CATIA platforms, the CATIA • A FORTRAN or C compiler is required to create system provides consistent user interfaces, fully CADAM IUE programs. Dassault Systems has tested compatible model database and application programming and certified the following compilers: interfaces, and the same advanced graphics interfaces. − Absoft FORTRAN 77 Version 3.0 CATIA Solutions model data is fully compatible among the − Absoft Pro FORTRAN Version 5.0 supported operating systems: AIX, HP-UX, IRIX, and − Microsoft Visual C++ Version 5.0 Solaris. • CADAM Drafting (5626-CCD) is the required base for Upward compatibility of CATIA model data is assured for CADAM IUE (5626-IUE), CATIA/CADAM MCX all subsequent CATIA releases. Downward compatibility Translator (5626-MCX), and CATIA/CADAM Hybrid of CATIA Solutions model data is also assured for entities Raster (5626-RAS). CATIA/CADAM 2D Markup and which were not introduced at the higher version or Annotation (5626-MU2) is a stand-alone product. release-level. For example, CATIA Version 3 Release 2 can read, but cannot process, guided cutting contact • All CADAM Drfting products in a given system must driven operations introduced in this version. be at the same version, release, and modification level, unless specifically announced otherwise. Because CATIA Version 4 Release 2.1 is not available for OS/390 , modifications needed to guarantee Access to HTML Format Documentation: In addition to interoperability between CATIA′s OS/390 and workstation the online FrameMaker documentation, some versions will be made available through corrective documentation (for example, CATIA Solutions Product service to CATIA Version 4, Release 1.7, Refresh 5. Enhancements and Overview) are also delivered in HTML format. Access to this documentation requires the The “transparent access” method allows enterprise availability of an HTML browser capable of displaying server users to access transparently CATIA models that HTML frames. contain specific CATIA Version 4 Release 2.1 entities. Note: Access to this documentation in FrameMaker Limitations: None format remains possible when an HTML browser is not available. Performance Considerations: Performance and response time are influenced by several factors, including processor and operating system, amount of system
-21- 299-062 memory, channel speeds, the number, type, and • IBM LUM for Windows NT is supplied on the CADAM organization of terminals, and the size of the data being Drafting product media. used. CATIA is designed for optimum benefit under all • supported operating systems. Product usage keys issued for any CATIA Version 4 Release 1 level remain valid for CATIA Version 4 Release 2.1. There is no need to request new keys for Planning Information this release. Concurrent and Nodelocked Licensing • IBM′s LUM is based on Isogon Corporation′s LicensePower/iFOR (iFOR/LS) technology. IBM′s LUM • Running in a Multi-user Environment with IBM LUM: is developed and supported by the IBM Software IBM LUM is available to CATIA users whose Development and Fulfillment Solutions organization in installations include multiple IBM, HP, SGI, or Sun Rome, Italy. Isogon Corporation′s LicensePower/iFOR workstation machines interconnected by a remains consistent with IBM′s LUM. TCP/IP-supported Token-Ring or Ethernet LAN or for concurrent execution of CATIA programs on a single Installability: None workstation. Direct Customer Support: IBM provides telephone CATIA for UNIX workstations uses LUM to control the support for questions concerning the installation, use and number of licenses acquired for the program. Each defects of CATIA products. Eligible customers may call CATIA license allows users, as identified by their user the IBM Support Center at 800-237-5511 in the United ID, to run simultaneously on a single machine and States or 800-426-2222 in Canada, 24 hours a day. Calls display up to five CATIA processes. A process invokes will be forwarded to the IBM CAD/CAM Support Center in license checking when it calls a CATIA interactive Poughkeepsie, New York for call-back between 8:00 a.m. function, a CATIA utility, or a CATGEO entry-point and 8:00 p.m., eastern standard time, during the business belonging to that product. For instance, with one week, except holidays. license the user can run: − One interactive CATIA session in an AIX, HP-UX, Internet Support: Support is provided on the World-Wide IRIX, or Solaris window Web (WWW). − Three batch utilities pertaining to the specified For Help Guides and information on education, go to the licensed program, from an AIX, HP, IRIX, or Solaris Engineering and Design page for Service and Support: window − One user batch program based on the CATGEO http://www.clearlake.ibm.com/MFG/engineering/ Application Program Interface add.html Using LUM administration facilities, system For technical assistance, go to the CATIA/CADAM administrators can configure CATIA products for Technical Support page: workstations to permit users to access CATIA programs on one of the several IBM, HP, SGI, or Sun http://service.software.ibm.com/catia workstations. Packaging: The programs are available on the following IBM LUM Runtime, Version 4.0 is required for distribution medium for each operating system shown: AIX 4.3.0 and AIX 4.3.1, HP-UX, IRIX, and Solaris licensed servers and clients. This level of LUM can ┌───────┬──────────────────┐ be downloaded for free from the IBM Software LUM │ │ MEDIA │ ├───────┼──────┬─────┬─────┤ download page at: │ │ │ │ │ │ │CD─ROM│8─mm │4─mm │ http://www.software.ibm.com/is/lum/ │OS │ │ │ │ ├───────┼──────┼─────┼─────┤ IBM LUM Runtime, Version 4.5 is required for │ AIX │ X │ X │ X │ AIX 4.3.2 and is delivered with the operating system. ├───────┼──────┼─────┼─────┤ │ HP │ X │ │ X │ • Running in a Single User Environment without LUM ├───────┼──────┼─────┼─────┤ │ SGI │ X │ │ X │ In an installation without LUM, CATIA Solutions for ├───────┼──────┼─────┼─────┤ Workstations licensed programs may be licensed to │ Sun │ X │ │ X │ ├───────┼──────┼─────┼─────┤ operate on a single workstation. In this mode of │NT │ X │ │ │ operation, the use of CATIA programs is restricted to └───────┴──────┴─────┴─────┘ the workstation for which it is registered during the installation process, and only one user can run the CATIA licensed product at a time; this user is limited Security, Auditability, and Control to five processes running on the machine from the display. In any configuration, standalone or LAN, when The announced programs use the security and auditability more than one concurrent use of a CATIA licensed features of the AIX operating system for the RS/6000 program is desired on a single workstation, LUM is family, the HP-UX operating system for the HP platform, required. the IRIX operating system for the SGI platform, and the Notes Solaris operating system for the Sun platform. • For further information on IBM LUM, go to the IBM If sensitive data is sent over external communications Software LUM download page at: facilities, user management may wish to pursue the use of cryptography. http://www.software.ibm.com/is/lum/ The customer is responsible for evaluation, selection, and • IBM LUM for AIX is also delivered as a standard implementation of security features, administrative component of AIX 4.3. procedures, and appropriate controls in application systems and communication facilities.
299-062 -22- licenses at the higher usage level must be discontinued Ordering Information first. For determining usage levels, ALC and YLC quantities cannot be combined. New Licensees YLC Licenses: The YLC feature numbers specified will depend on the usage level ordered for the license for a Orders for new licenses will be accepted now. given customer number. The first license must be at Shipment will begin on the planned availability date. usage level 1. The maximum number of licenses at a usage level must be ordered before ordering the next • Orders that ship prior to the planned availability will usage level. When licenses are discontinued, the licenses receive CATIA Solutions Version 4, Release 2.0. at the higher usage level must be discontinued first. For • determining usage levels, ALC and YLC quantities cannot Orders that ship after the planned availability date will be combined. receive CATIA Solutions Version 4, Release 2.1. An order for CATIA Basic licensed programs consists of SPO one or more licensed program orders (5626-XXX), and one System Program Order (SPO), 5628-ACA, for IBM 5628-ACA SPO for RS/6000, HP, SGI, Sun, or NT: These RS/6000, HP, SGI, Sun, or NT workstations. programs will be shipped under the 5628-ACA SPO. The SPO is required for all program shipments and future The 5626-XXX orders are required for billing and asset updates. registration. The 5628-ACA orders are required to ship machine-readable materials and publications. Initial orders placed for a program type 5626 without a corresponding order or MES for the SPO (5628-ACA) will Note: Only one media type can be specified on each SPO. either fail order validation, or will not generate a shipment of software or publications. The SPO is For existing CATIA products, ordering information designated to the processor on which the program type remains unchanged. 5626 is licensed. Each customer number and physical machine readable copy of the program must have its own Basic License: To order a basic license for a 5626 SPO. program type, specify the program number (5626-XXX) and feature number 9001 for asset registration. Specify Initial Orders: When ordering the first 5626-XXX program the feature numbers as shown below: for a customer who does not already have CATIA Solutions Version 4 installed, an order must also be PLC11 ALC12 YLC13 placed for the SPO, 5628-ACA. Both the 5626-XXX Feature Usage Maximum Feature Feature program order and the SPO must be for the same CPU Number Level Quantity Allowed Number Number system type/system number, and have the same scheduled shipment date. 0011 250 Subsequent Licenses: The SPO must have a feature 1 1 1 0006 0001 number for every CATIA Solutions program that is 22 — 10 9 0007 0002 installed or on-order, therefore, when a program that was 3 11 — 40 30 0008 0003 not previously installed is ordered, the SPO must be 4 41 — 100 60 0009 0004 updated. 5 101 + 150 0010 0005 To Update an On-order System: When a license for a new 11 Primary License Charge 5626 program is ordered for an on-order system, the 12 Annual License Charge 5628-ACA must be updated to reflect the feature number 13 Yearly License Charge of the licensed program desired. Also, for asset registration and billing purposes an order for the Note: For quantities exceeding 250, contact your individual licensed program type 5626 is required. marketing representative for additional information. To Update an Installed System: When a license for a new Program Numbers for New Products and Configurations 5626 program is ordered for an installed system, the 5628-ACA must be updated to reflect the feature number CATIA Mechanical Design (Mech) Solutions of the licensed program desired.
Program For information on the shipment of publications as a Product/Configuration Name Number result of orders or updates to orders, refer to the Unlicensed Documentation section of this announcement. CATIA.Generative Composite Tape 5626-GCT Design Product 5628-ACA Feature Numbers: The following feature CATIA.Mech.Generative Composites Design 5626-GCD numbers are used with the 5628-ACA SPO. This Add-on Configuration information is used for shipment of publications and media. The maximum quantity of each of the features First select the charge option, either PLC with the that may be specified is one for each of the 5626 corresponding quantity-based ALC, or the quantity-based programs. YLC. Feature Program PLC/ALC Licenses: Specify feature numbers for the PLC. Program Name Number Number Then specify feature numbers for the ALC. The feature number will depend on the usage level ordered for the CATIA.Generative Composite 1517 5626-GCT license for a given customer number. The first license Tape Design Product must be at usage level 1. The maximum number of CATIA.Mech.Generative 1518 5626-GCD licenses at a usage level must be ordered before ordering Composites Design Add-on the next usage level. When licenses are discontinued, the Configuration
-23- 299-062 For feature numbers for previously announced programs, Annual refer to the following Software Announcements: MRM Process 296-065, dated March 5, 1996 Workstation Media Charge 296-407, dated October 22, 1996 Platform Feature Distribution Feature 297-199, dated June 10, 1997 (Oper. Sys) Number Medium Number 297-473, dated November 11, 1997 298-245, dated July 7, 1998 RS/6000 3410 CD-ROM 0110 (AIX) 3407 8-mm tape 0130 Examples of Ordering 3431 4-mm tape 0140
Example 1: A customer wishing to order quantity-based Hewlett-Packard 3414 4-mm tape 0160 CATIA.Generative Composites Manufacturing Product (HP-UX) 3417 CD-ROM 0170 (5626-GCM) on CD-ROM, with 12 users on a RS/6000 workstation would order the following: Silicon Graphics 3415 4-mm tape 0180 (IRIX) 3418 CD-ROM 0181 CATIA.Generative Composites Manufacturing Product (5626-GCM) Sun 3419 4-mm tape 0182 (Solaris) 3420 CD-ROM 0183 Feature Description Quantity Number Windows NT 3432 CD-ROM 0185 Asset Registration 9001 Note: Only one media type can be specified on each SPO. RS/6000 Registration 12 5350 PLC 12 0011 Customization Options: Select the appropriate feature ALC 1 0006 numbers to customize your order to specify the delivery ALC 9 0007 options desired. These features can be specified on the ALC 2 0008 initial or MES orders. Note: The configurator will automatically include the SPO Example: If publications are not desired for the initial 5628-ACA, feature number 3410 (for AIX CD-ROM) with a order, specify feature number 3470 to ship media only. quantity of one, and feature number 0110 (for annual For future updates, specify feature number 3480 to ship MRM process charge) with a quantity of one. media updates only. If, in the future, publication updates are required, order an MES to remove feature number Example 2: The same customer wishes to add 30 users 3480; then, the publications will ship with the next release on the Sun platform. Order an MES to add features and of the program. change quantities of installed features. Feature Add Feature Description Number Description Quantity Number Initial Shipments Sun Registration 30 5354 PLC 30 0011 Serial Number Only (suppresses shipment 3444 ALC 28 0008 of media and documentation) ALC 2 0009 The customer now has a quantity of 42 PLC and 42 ALC Ship Media Only (suppresses initial 3470 on the RS/6000 and Sun platforms. shipment of documentation) Note: The configurator will automatically include the SPO Ship Documentation Only (suppresses 3471 5628-ACA, feature number 3420 (for Solaris CD-ROM) with initial shipment of media) a quantity of one, and feature number 0183 (for annual MRM process charge) with a quantity of one. Update Shipments
To receive the maximum ALC discount, all occurrences Ship Media Updates Only (suppresses 3480 of a given Machine type/model number should be ordered update shipment of documentation) on the same CPU serial number. Ship Documentation Only (suppresses 3481 Basic Machine-Readable Material: To order, select the update shipment of media) feature number of the desired distribution medium: Suppress Updates (suppresses update 3482 When ordering the 5628-ACA PO for RS/6000, HP, SGI, shipment of media and documentation) Sun, or NT workstations, specify the appropriate media feature number and the corresponding Annual MRM Expedite Shipments process charge feature number. These programs will be shipped under the 5628-ACA SPO. 5628-ACA is required Local IBM Office Expedite 3445 for all program shipments and future updates. (for IBM use only)
Customer Expedite Process Charge 3446 ($30 charge for each product)
299-062 -24- Expedite shipments will be processed to receive 72-hour The following Common Publications are supplied only on delivery from the time IBM Software Delivery Solutions the CD-ROM: (SDS) receives the order. SDF will then ship the order via overnight air transportation. Order Title Number Unlicensed Documentation: A memo, program directory, and one copy of the CATIA Common Publications are CATIA Solutions Problem Determination SH52-0604 supplied automatically with the basic machine-readable Guide material. CATIA Solutions Messages and Codes SH52-0612 When ordering the reference publications, basic CATIA Object Manager Interactive SH52-0630 machine-readable material, the no-charge feature Functions Reference Manual number, 7001, must be added to get the CD-ROM CATIA Solutions Application Programming SH52-0631 (SK2T-5219). Interface Reference Manual Additional printed copies can be ordered for a fee through Order the normal publication ordering procedure, PUBORDER, Title Number or via the Publication Notification System (PNS) Web site at: CATIA Object Manager Interactive User SH52-0633 Access Commands http://www.ibm.com/shop/publications/pns/ CATIA Solutions Interactive Functions SH52-0634 Reference Manual CATIA Common Publications for Workstations: The Common Publications are tied to the media feature CATIA Solutions Declaration Quick SH52-0858 number. An order for workstation media will generate an Reference UNIX Workstations order for the Common Publications. CATIA Solutions Application Programming SH52-1225 Note: All workstation platforms share the same Common Interface Online Index Publications, except where noted. CATIA Solutions Interactive User Access SH52-1226 Command Online Index The following Common Publications will be supplied in hardcopy format: CATIA Solutions Plotting and Printing SH52-1249 User′s Guide UNIX Workstation Order CATIA Solutions Glossary SH52-1224 Title Number 14 Not available on CD-ROM. CATIA Solutions Application Architecture SH52-0598 Overview Reference Publications: All publications, except those associated with the CATIA/CADAM Drafting suite of CATIA Solutions Software Administration SH52-0601 products, are also supplied on CD-ROM (SK2T-5219) at Guide UNIX Workstations no additional charge and are referred to as the “Softcopy CATIA Solutions Data Administration and SH52-0603 Collection Kit — Reference Publications.” Publications for Interoperability Guide CATIA/CADAM Drafting products are included on the product media. Motif CATIA Solutions User′s Guide UNIX SH52-0606 Workstation Printed versions of the publications can be ordered, for a CATIA Object Manager Interactive User SH52-0611 fee, through the normal publication ordering procedure, Access Reference Manual PUBORDER, or via the Publication Notification System (PNS) Web site at: CATIA Solutions Application Programming SH52-0613 Interface Quick Reference14 http://www.ibm.com/shop/publications/pns/ CATIA Solutions Interactive User Access SH52-0614 Customers interested in a complete list of all CATIA Commands Quick Reference14 Solutions Version 4 IBM publications should ask their IBM CATIA Object Manager Utilities User′s SH52-0632 representative to print out the results of an IBM Guide PUBORDER search on the keyword CATIA or CATIA/CADAM. CATIA Solutions Product Enhancement SH52-1093 Overview New Publications for this Release CATIA Solutions Double-Byte Character SH52-1108 Order Ships with Set Fonts Title Number Product CATIA Solutions Installation Guide SH52-1189 CATIA Generative Composite SH52-1308 Y UNIX Workstations Tape Design User′s Guide CATIA Solutions Installing Additional SH52-1223 (5626-GCT) Features UNIX Workstation CATIA Generative Composite SH52-1310 N Tape Design Application Programming Reference Manual (5626-GCT)
-25- 299-062 No-Charge Publications: Orders for subsequent licenses will generate the shipment of any Common Publications that are new since the customer′s initial order. If the following products are ordered for subsequent licenses or updated systems, the publications (hardcopy) listed below will ship with the product. In addition, when ordering the following products, the 70XX feature numbers can be used to request multiple copies of the related Guides at no additional charge. Only one copy of each of the following publications can be ordered per license. These guidelines for No-Charge Publications also apply when any of the products shown below are contained in any CATIA configuration for mechanical products. For example, a customer who has ordered five new licenses of 5626-CDA CATIA.Data Management-Access Product would be entitled to order up to five copies of the SH52-1190 CATIA Data Management-Access Product Structure and Database Access User′s Guide UNIX Workstation using the no-charge feature number 7015.
No-Charge Program Order Feature Title Number Number Number CATIA Data Management-Access 5626-CDA SH52-1190 7015 Product Structure and Database Access User′s Guide UNIX Workstation CATIA Data Management Products 5626-CDB SH52-0675 Planning and Administration Guide15 CATIA Data Management Products 5626-CDR SH52-0677 Installation Guide15 CATIA Cloud to Geometry 5626-CGO SH52-1191 7016 User′s Guide CATIA Composite Covering 5626-COV SH52-1203 7017 User′s Guide CATIA Viewing Services 5626-CVS SH52-0635 Reference Manual15 CATIA Drafting User′s Guide 5626-DRA SH52-1094 7002 CATIA Draw-Space (2D/3D) 5626-DRS SH52-1000 7044 Integration User′s Guide CATIA Dynamic Sketcher 5626-DYS SH52-1095 7014 User′s Guide CATIA Engraving/Embossing 5626-ENG SH52-1241 7028 User′s Guide CATIA Functional Dimensioning 5626-FDT SH52-1192 7018 & Tolerancing User′s Guide CATIA Global Shape 5626-GSD SH52-1236 7029 Deformation User′s Guide CATIA Mold & Die Machining 5626-MAD SH52-1104 7003 Assistant User′s Guide CATIA Manufacturing 5626-NCB SH52-0650 7030 Infrastructure User′s Guide CATIA 4D Navigator User′s Guide 5626-N4D SH52-1196 7020 CATIA Prismatic Machining 5626-PMA SH52-1103 7004 Assistant User′s Guide CATIA Prismatic Machining 5626-PMP SH52-1260 7027 Programmer User′s Guide CATIA Post Processor Builder 5626-PPB SH52-1197 7021 User′s Guide CATIA Realistic Rendering 5626-REN SH52-1199 7023 User′s Guide CATIA Cell Design & Robot 5626-ROS SH52-1022 7006 Programming User′s Guide CATIA Cell Design & Robot 5626-ROS SH52-1107 7005 Programming Methodology Guide CATIA Part Design User′s Guide 5626-SOE SH52-1200 7024 CATIA STL Rapid Prototyping 5626-STL SH52-1244 7031 User′s Guide CATIA Toolshop Access 5626-TSA SH52-1198 7022 User′s Guide CATIA Visualization Studio 5626-VST SH52-1025 7007 User′s Guide CATIA Assembly Modeling 5626-ASS SH52-7369 7035 User′s Guide
299-062 -26- No-Charge Program Order Feature Title Number Number Number CATIA-Alias Interoperability 5626-CAI SH52-7370 7037 User′s Guide CATIA CDM-PM Integration 5626-CDP SH52-7374 7038 User′s Guide CATIA Generative Shape 5626-GSM SH52-1242 7036 Modeling User′s Guide CATIA Database Library 5626-LIC SH52-7378 7041 Access User′s Guide CATIA Multi-Axis Machining 5626-MMP SH52-7372 7042 Programmer User′s Guide CATIA 3D Parametric Variational 5626-PA3 SH52-7373 7043 Modeler Beginner′s Guide CATIA Sheetmetal Design 5626-SHE SH52-7375 7048 User′s Guide CATIA Surface Machining 5626-SMP SH52-7376 7049 Programmer User′s Guide CATIA Distributed Services 5626-CDS SH52-0720 Planning and Administration Guide15 CATIA CATIA/CADAM Coupler 5626-CCC SH52-1234 Setup Methodology and Project Management Guide15 CATIA Generative Aerospace 5626-GSA SH52-7379 7052 Sheetmetal Design User′s Guide CATIA Body in White Templates 5626-BWT SH52-7380 7039 User′s Guide CATIA Generative Composite 5626-GCC SH52-7383 7047 Covering User′s Guide CATIA Generative Composite Tape 5626-GCT SH52-1308 7057 Design User′s Guide16 CATIA Inspection Planning 5626-IPA SH52-7371 7040 Assistant User′s Guide CATIA Generative Composite 5626-GCM SH52-1306 7053 Manufacturing User′s Guide CATIA Lathe Machining 5626-LMP SH52-1302 7054 Programmer User′s Guide 15 There are no 70XX feature numbers for these publications. 16 These are new publications for this release, CATIA Version 4 Release 2.1.
CATIA Online Publications Optional CD-ROM Copies CATIA Solutions provides online publications in Frame Publication Feature format via a Softcopy Collection Kit CD-ROM (SK2T-5219). Title Number Number Price The Frame version of the softcopy reference publications includes the unlicensed manuals and is considered part CAA Guides, Hardcopy LK2T-5844 8002 $4,000 of the basic machine-readable material. and CD-ROM When working in an interactive Motif CATIA session, the CAA Guides, CD-ROM LK2T-5844 8003 4,000 softcopy publications can be accessed using Version 5.5 or a later version of FrameViewer. FrameViewer for UNIX Notes workstations (AIX, HP-UX, IRIX, or Solaris) is delivered on the Softcopy Collection Kit CD-ROM. • Specify feature number 8002 to receive hardcopy and CD-ROM. Outside an interactive CATIA session, the softcopy • Specify feature number 8003 to receive CD-ROM only. publications can be accessed using any of the FrameViewer-supported operating environments (UNIX, Subsequent updates (technical newsletters or revisions Windows NT, and Windows 95). between releases) to the publications shipped with the product will be distributed to the user of record for as long Licensed Documentation CAA Guides: The CAA Guides as a license for this software remains in effect. A Licensed Documentation is available from IBM. For any separate publication order or subscription is not needed. CATIA customer who has the CATIA.Object Manager Product (5626-COM), the CATIA.CAA Application The availability of national language publications will be Development Configuration (5626-CAD), or any other announced at a later date. Configuration, the CAA Guides are available by ordering an optional, charge publication feature number of the SPO. It will be supplied on CD-ROM, (LK2T-5844) and/or in hardcopy with the initial order.
-27- 299-062 Volume Discount: Contact your IBM representative. Terms and Conditions Version-to-Version Upgrade Credits Apply: No Licensing: IBM Customer Agreement (ICA) Warranted: Yes Designated Machine: Not required Licensed Program Materials Availability Variable Charges Apply: No • Restricted Materials of IBM: None • Installation License or Location License Applies: No Non-Restricted Source Materials: None • Object Code Only (OCO): All The Licensing Mechanism: On workstation environments, CATIA controls the number of concurrent users of a Program Services: Licensed customers are entitled to the CATIA product according to the number of licenses following benefits: acquired for the product. • Continued use of the product Each license authorizes a user (identified by a user ID and • Central Service, including a Technical Support Center, group) to run up to five CATIA Solutions Version 4 for reporting defects to the licensed product will be processes for the specified product on a single machine provided for as long as available via: and display terminal. A process invokes licensing checking when it invokes a CATIA Solutions Version 4 1. CATIA/CADAM registered services on the Internet interactive function, a CATIA Solutions Version 4 utility, 2. IBMLink /SERVICELink Electronic Technical or a CATGEO entry-point belonging to this product. For Response (ETR) for SoftwareXcel customers instance, with one license, you can run on the same 3. Telephone station: 4. Paper APAR forms (G150-0180) • One interactive CATIA Solutions Version 4 session • Any maintenance created to correct defects • Another interactive CATIA Solutions Version 4 session • Any enhancement or maintenance releases to the in another window of the same display terminal licensed product • A batch utility executed from the HFT terminal • A batch utility executed from a window Paper APARs and any APAR support material may be • A user program based on the CATGEO Application mailed to: Programming Interface IBM Corporation An editable user profile defines the list of products that CAD+ Solutions must be acquired by each process. Licenses are acquired 522 South Road P535 at the beginning of the process and are released at its Poughkeepsie, NY 12601 termination. In addition, an interactive CATIA Solutions Attention: CATIA APAR Coordinator Version 4 function enables the user to dynamically acquire and release licenses. Licenses automatically The IBM Support Center, at 800-237-5511 in the United acquired at the beginning of the process cannot be States and 800-426-2222 in Canada, will accept technical released before its termination. questions concerning maintenance, defects, installation, and usage of CATIA 24 hours a day. Callers will be asked A CATIA product requires a license for each of its to supply their IBM Customer Number, the name of the prerequisite products. software package (CATIA) and their operating system. Incoming calls will be queued to the CATIA/CADAM Licenses for CATIA configurations are acquired and Technical Support Center for “call back” response released for the total configuration. The functions within between 8:00 a.m. and 8:00 p.m., eastern time, during the a configuration cannot be shared. business week, excluding holidays. Optional Software: In a single user environment, without Internet support is provided on the World Wide Web license management, CATIA for UNIX platform licensed (WWW). For Help Guides and information on education, programs may be licensed to operate on a single go to the Engineering and Design page for Service and workstation. In this mode of operation, only one CATIA Support: license can be registered by machine, and only one CATIA user can run at a time. This user is limited to five http://www.clearlake.ibm.com/MFG/engineering/ processes running on the machine from the same display. add.html When additional CATIA licenses for one product are For technical assistance, go to the CATIA/CADAM added to the same workstation, IBM License Use Technical Support page: Management (LUM) is required. http://service.software.ibm.com/catia Testing Period: None Central Service, including a Technical Support Center, will be available until discontinued by IBM upon six months′ Educational Allowance: Education Allowance does not written notice. apply. However, Higher Education and Training (HEAT) is available to Education Allowance qualified customers. Support for Workstation CATIA Version 4 Release 1.9 will HESC is withdrawn for all CATIA Version 4 products not end until CATIA Version 4 Release 2.2 becomes effective with Version 4, Release 2.1. available. Additional licenses or features, as appropriate, must be CATIA Version 4 Release 1.8 is no longer supported, obtained to exceed usage limits. effective immediately.
Educational Allowance: Yes, to qualified education customers.
299-062 -28- Communique! Software Process Charge: There is a one-time process charge to cover the cost of distributing the basic machine-readable Vendor terms apply to the Communique! software material, including service updates. provided by the MDL Corporation. For information, visit their Web site at: Trademarks http://www.mdlcorp.com RS/6000, GXT150L, GXT150M, GXT1000, POWER Gt4xi, and IBMLink are trademarks of International Business Machines Support Line: IBM Support Center Corporation in the United States or other countries or both. AIX, SOM, Presentation Manager, VisualAge, RETAIN, DB2 Universal Database, DB2, DB2 Connect, SNAP/SHOT, and OS/390 are registered trademarks of International Business Charges Machines Corporation in the United States or other countries or both. Basic License Charges: The Basic Charges for the Pentium is a trademark of Intel Corporation. previously announced Version 4 products are unaffected Microsoft and Windows are trademarks of Microsoft by this announcement. Corporation. Windows NT is a registered trademark of Microsoft Note: For quantities exceeding 250, contact your Corporation. marketing representative for additional information. UNIX is a registered trademark in the United States and other countries exclusively through X/Open Company Usage Limited. PLC Level Quantity ALC YLC Other company, product, and service names may be trademarks or service marks of others. CATIA.Generative Composite Tape Design Product (5626-GCT)
$45,000 1 1 $6,300 $21,600 2 2 to 10 5,850 20,056 3 11 to 40 5,400 18,511 4 41 to 100 4,950 16,971 5 101 + 4,500 15,429
CATIA.Mech.Generative Composites Design Add-on Configuration (5626-GCD)
$70,000 1 1 $9,800 $33,600 2 2 to 10 9,100 31,198 3 11 to 40 8,400 28,795 4 41 to 100 7,700 26,400 5 101 + 7,000 24,000
Upgrade License Charges: The Upgrade License Charges previously announced are unaffected by this announcement. Note: The ALC for upgrades are the same as those shown above in the Basic License Charge section. The ALC charges for the new product must commence the following day.
YLC: This license charge is billed yearly in advance for the use of a licensed program. Customers who pay a yearly license charge for a licensed program receive enhancements and future releases, if any, at no additional charge. A prorated credit will be issued for the unused portion of the yearly license charge in the event a licensed program is discontinued.
PLC/ALC: Customers who pay a PLC and an ALC for a licensed program receive enhancements and future releases, if any, at no additional charge. Significant new functions may be offered as an optional feature and charged for separately. If a replacement program is announced and the customer elects to license the replacement program for a one-time or PLC/ALC and replace the prior program, an upgrade charge may apply. The first payment consists of the PLC and the ALC. The ALC applies yearly thereafter.
-29- 299-062