Free Space Optical Communications with High Intensity Laser Power Beaming

Total Page:16

File Type:pdf, Size:1020Kb

Free Space Optical Communications with High Intensity Laser Power Beaming Cleveland State University EngagedScholarship@CSU ETD Archive 2011 Free Space Optical Communications with High Intensity Laser Power Beaming Daniel Edward Raible Cleveland State University Follow this and additional works at: https://engagedscholarship.csuohio.edu/etdarchive Part of the Electrical and Computer Engineering Commons How does access to this work benefit ou?y Let us know! Recommended Citation Raible, Daniel Edward, "Free Space Optical Communications with High Intensity Laser Power Beaming" (2011). ETD Archive. 251. https://engagedscholarship.csuohio.edu/etdarchive/251 This Dissertation is brought to you for free and open access by EngagedScholarship@CSU. It has been accepted for inclusion in ETD Archive by an authorized administrator of EngagedScholarship@CSU. For more information, please contact [email protected]. FREE SPACE OPTICAL COMMUNICATIONS WITH HIGH INTENSITY LASER POWER BEAMING DANIEL EDWARD RAIBLE Bachelor of Science in Electrical Engineering Cleveland State University May 2006 Master of Science in Electrical Engineering Cleveland State University May 2008 submitted in partial fulfillment of requirements for the degree DOCTOR OF ENGINEERING at the CLEVELAND STATE UNIVERSITY June 2011 This dissertation has been approved for the Department of Electrical and Computer Engineering and the College of Graduate Studies by ________________________________________________ Dissertation Committee Chairperson, Taysir H. Nayfeh ________________________________ Department/Date ________________________________________________ Nigamanth Sridhar ________________________________ Department/Date ________________________________________________ Ana V. Stankovic ________________________________ Department/Date ________________________________________________ Petru S. Fodor ________________________________ Department/Date ________________________________________________ John F. Turner ________________________________ Department/Date This work is dedicated to the memory of my dearest friends, Michael Matthews and Jason Adams. It would have been great, and I miss you. ACKNOWLEDGEMENTS There are many people that I would like to express my gratitude towards, starting with my advisor Dr. Taysir Nayfeh, for affording me the opportunity to pursue my education through working at the Industrial Space Systems Laboratory, and for helping me develop my skills as a researcher. I would like to graciously thank my committee for their time and review starting with Dr. Nigamanth Sridhar for providing his background in wireless systems, Dr. Ana V. Stankovic for offering her knowledge in power electronics and systems, Dr. Petru S. Fodor and Dr. John F. Turner for supplying their expertise in optics and general physics, and finally Dr. Joseph A. Svestka for serving as a non-voting member and for sharing his expertise in systems engineering and mathematical programming. I am ever grateful for the technical guidance that I received from Bernie Sater of Photovolt, Inc. His lifelong pursuit of the VMJ technology is the enabler of this project. Special thanks to Ken Edwards and the Eglin AFRL for believing in and supporting this research. I am looking forward to what the future will bring with HILPB. Thanks to Hobson Lane, Bob Rice and NGST, as well as Colin Burke and LIMO for providing their facilities and invaluable expertise. Great thanks to Ray Beach, Fred Wolff and Jim Soeder of the NASA John H. Glenn Research Center for their support of the ISSL and our work over the years. I would also like to thank several graduate students and employees with whom I have had the honor of working with at the Industrial Space Systems Laboratory: Brian Fast, Dragos Dinca, Nick Tollis, Andrew Jalics, Sagar Gadkari, Scott Darpel, Maciej Zborowski, Harry Olar, Tom DePietro, Michael Wyban, Ishu Pradhan, Anita Wiederholt and David Avanesian. They made many great contributions to this research, and it has been a pleasure serving on the team with them. Thanks to Adrienne Fox and Jan Basch for all of their hard work behind the scenes, the rest of the Electrical and Computer Engineering Department, the Industrial and Manufacturing Engineering Department, and Pam Charity, Gregg Schoof and Joanne Hundt in the Dean‟s office for their support and guidance given to me while at the Fenn College of Engineering. Also, thanks to my NASA colleagues James Nessel, Alan Hylton and Robert Manning for lending a hand and giving me sanity checks during this work. I wish to particularly thank my wife, Jamie, for her eternal patience and love. I am grateful to my parents Elaine and Dennis, sister Janice, Uncle Richard, Uncle Fred and Aunt Anna Rae for their continual support and for encouraging me to always take the Giant Steps in life. FREE SPACE OPTICAL COMMUNICATIONS WITH HIGH INTENSITY LASER POWER BEAMING DANIEL EDWARD RAIBLE ABSTRACT This research demonstrates the feasibility of utilizing high intensity laser power beaming (HILPB) systems as a conduit for robust free-space optical communications over large distances and in challenging atmospheric conditions. The uniqueness of vertical multi-junction (VMJ) photovoltaic cells used in HILPB systems in their ability to receive and to convert at high efficiency, very high intensity laser light of over 200 W/cm2, presents a unique opportunity for the development of the robust free space optical communication system by modulating information signals onto the transmitted high intensity photonic energy. Experiments were conducted to investigate and validate several optical communications concepts. A laser modulator was implemented to exhibit the excellent transient response of the VMJ technology at very high illumination intensities, and thus show its applicability to optical communications. In addition, beam polarization optic stages were employed to demonstrate a secure multi-channel communications scheme. The off-axis response of the receiver and the beam profile were characterized in order to x evaluate the feasibility of developing acceptable pointing and tracking geometries. Finally, the impact of signal modulation on the total converted energy was evaluated and shown to have minimal effect on the overall power transmission efficiency. Other aspects of the proposed communication system are studied including: quantifying beamwidth and directivity, signal-to-noise-ratio, information bandwidth, privacy, modulation and detection schemes, transmission channel attenuation and disturbances (atmospheric turbulence, scintillation from index of refraction fluctuations, absorption and scattering from thermal and moisture variation) and beam acquisition tracking and pointing influence on the performance metrics of optical transmission technologies. The result of this research demonstrates the feasibility of, and serves as a comprehensive design guide for the implementation of a HILPB communication system. Such a system may be applied to mission architectures requiring generous amounts of link margin, critical privacy in battle field environment, and/or where the channel characteristics are dynamic and unknown. In addition, the developed mathematical models and empirical data support the ongoing wireless power transmission efforts by expanding the fundamental knowledge base of the HILPB technology. xi TABLE OF CONTENTS Page NOMENCLATURE ........................................................................................................ XV LIST OF TABLES ........................................................................................................... XX LIST OF FIGURES ....................................................................................................... XXI CHAPTER I: INTRODUCTION ........................................................................................ 1 1.1 A Brief History of Free Space Optical Communications ........................... 1 1.2 The HILPB System ................................................................................... 10 1.3 Future Potential for a High Intensity Laser Communications System ..... 16 1.4 Document Organization ............................................................................ 19 CHAPTER II: LITERATURE REVIEW OF LASER COMMUNICATIONS ............... 20 2.1 Advantages of Optical Communications .................................................. 20 2.2 Beam Polarization ..................................................................................... 27 2.3 Modulation and Demodulation Techniques .............................................. 35 2.3.1 Direct Detection Receiver ......................................................................... 36 2.3.2 Coherent Detection Receiver .................................................................... 42 2.4 Terrestrial and In-Space Issues ................................................................. 44 2.4.1 Terrestrial Links ........................................................................................ 45 2.4.2 Spatial Crosslink ....................................................................................... 52 xii 2.4.3 Waveguide Medium .................................................................................. 57 2.5 Beam Acquisition, Tracking and Pointing ................................................ 59 CHAPTER III: EXPERIMENT SETUP AND RESEARCH METHODOLOGY ........... 63 3.1 System Description – Optical Receivers ................................................... 63 3.2 System Description – Laser and Optics Bench ........................................
Recommended publications
  • Observing Photons in Space
    —1— Observing photons in space For the truth of the conclusions of physical science, observation is the supreme court of appeals Sir Arthur Eddington Martin C.E. HuberI, Anuschka PauluhnI and J. Gethyn TimothyII Abstract This first chapter of the book ‘Observing Photons in Space’ serves to illustrate the rewards of observing photons in space, to state our aims, and to introduce the structure and the conventions used. The title of the book reflects the history of space astronomy: it started at the high-energy end of the electromagnetic spectrum, where the photon aspect of the radiation dominates. Nevertheless, both the wave and the photon aspects of this radiation will be considered extensively. In this first chapter we describe the arduous efforts that were needed before observations from pointed, stable platforms, lifted by rocket above the Earth’s atmosphere, became the matter of course they seem to be today. This exemplifies the direct link between technical effort — including proper design, construction, testing and calibration — and some of the early fundamental insights gained from space observations. We further report in some detail the pioneering work of the early space astronomers, who started with the study of γ- and X-rays as well as ultraviolet photons. We also show how efforts to observe from space platforms in the visible, infrared, sub-millimetre and microwave domains developed and led to today’s emphasis on observations at long wavelengths. The aims of this book This book conveys methods and techniques for observing photons1 in space. ‘Observing’ photons implies not only detecting them, but also determining their direction at arrival, their energy, their rate of arrival, and their polarisation.
    [Show full text]
  • 5. Astronomy Through the Atmosphere
    5. Astronomy Through the Atmosphere Ground based observations are affected by: • absorption • refraction • scattering • scintillation In this section we will briefly consider some of the effects of these four phenomena. 1 Absorption The Earth’s atmosphere is opaque to E-M radiation, apart from two windows: in the optical and radio regions of the E-M spectrum. X-rays UV Visible Infrared sub mm Radio mm & microwave hard soft EUV (FIR) Completely opaque Optical window Radio window Molecular transitions (inc. H2O) 0 Ionisation of air molecules (starting with ozone) Ionosphere reflective Fraction of energy absorbed 1 1nm 10nm 100nm 1mm 10mm 100mm 1mm 1cm 10cm 1m 10m2 100m Completely transparent Wavelength Absorption Between the optical and radio windows there are numerous absorption bands due to molecular transitions (mainly of water). It is possible to get above the clouds containing this water vapour because of the 4 temperature structure (km) of the atmosphere. Above about 2 km there can be a thin inversion Altitude 2 layer, where the temperature Inversion increases with height. Clouds layer form at the base of the inversion layer, leaving generally clear, dry 020 Temperature (C) air above. 3 Absorption The world’s best observatories (e.g. La Palma, Hawaii, La Silla, Paranal) are all at altitudes and locations which place them above inversion layers. 4 Absorption How does absorption in the atmosphere affect the apparent brightness of objects? We model the atmosphere as a series of plane-parallel slabs. Consider a thin slab of thickness d
    [Show full text]
  • Appendix a Glossary
    Appendix A Glossary Only brief definitions are given to provide a quicklook reference for the reader with regard to terminology. Bold face type within a definition refers to a subject-related entry. 6788) 6789) 6790) Aberration. Geometrical errors in imagery whereby a perfect image is not formed. Typical aberrations include spherical aberration, astigmatism, coma, and chromatic aberrations. Lens bendings, locations, powers, materials, and increasing the number of lenses and aper­ ture stop positions are all used to minimize aberrations. The aberration theory of images generated by an optical system has been gradually develo­ ped from the seventeenth century on. Early analyses by e.g. Descartes, Roberval and Huy­ gens concern the spherical aberration which arises when imaging an object point through a single refracting or reflecting surface. Absorption band. A range of wavelengths, or frequencies, in the electromagnetic spectrum within which radiant energy is absorbed by a substance (gas, liquid or solid). In the gaseous phase, absorption lines are much narrower than in liquids or solids. In a polyatomic gas, an absorption band is actually composed of discrete absorption lines which appear to overlap. Each line is associated with a particular mode of vibration and rotation induced in a gas mol­ ecule by incident radiation. Examples: • Ozone (O3) has several absorption bands. They are: a) the Hartley bands (2000-3000 Å in UV with max absorption at 2550 Å); b) the Huggins bands (weak absorption between 3200-3600 Å); c) the Chappuis bands (weak and diffuse at 4500 Å and at 6500 Å in VIS); d) IR bands at 4.7, 9.6, and 14.1 mm.
    [Show full text]
  • Atmosphere • Filters Part of the Electromagnetic Radiation • to the Earth's Surface – Optical Window 400 – 800 Nm
    Atmosphere • Filters part of the electromagnetic radiation • To the Earth’s surface – optical window 400 – 800 nm – radiowindow 1mm – 15 m • Disturbances – refraction (light bends in the atmosphere) – skintillation (twinkling star) – seeing Observational tools • Optical telescopes – Observations of visible light • Radio and submillimeter telescopes – Observations of the radio region (radio window) – Satellites and probes – Other parts of the electromagnetic radiation – planet, asteroid and comet probes Telescope types Refracting telescope • A lens acts as the objective, front side of the telescope • First refracting telescopes at the start of the 17th century – chromatic aberration, focal points for different wavelengths don’t connect • correction: achromatic lenses • Structural problem: supporting the lens – Largest diameter 102 cm • Astrographs: size of the image field 5o – mapping of large areas Reflecting telescope • A paraboloid mirror (main mirror) covered with a thin aluminum layer collects the light • Main mirror reflects the light back to the incident direction – Image at the focal point (prime focus) • Difficult to reach – Usually a secondary mirror that has been placed before the prime focus -> directs light somewhere else • Image at the secondary focus • The shape and position of the secondary mirror defines the focus type • Coma error Telescope foci Prime focus • Location where the reflected light forms an image • Observations difficult because focus is in front of the main mirror • Placement of large equipment difficult Newton
    [Show full text]
  • Radio Astronomy: How J.C. Bose's Invention Opened a New Window To
    Radio Astronomy: How J.C. Bose’s invention opened a new window to the Universe Dr. Yashwant Gupta Centre Director, NCRA, TIFR, Pune [email protected] Prologue: Sir J.C. Bose's work in radio microwave optics was specifically directed towards studying the nature of the phenomenon and was not an attempt to develop radio into a communication medium. His experiments took place during the same period (from late 1894 on) when Guglielmo Marconi was making breakthroughs on a radio system specifically designed for wireless telegraphy. In 1895, he demonstrated the generation & reception of radio waves in Kolkata, a good 2 years before the experiment by Marconi. It is thanks to this stellar breakthrough that we are able to probe the Universe in a unique manner using radio wavelengths. 1. Introduction to Radio Astronomy Astronomy is one of the oldest sciences. It started from the time mankind turned its gaze upwards to try and understand the heavens. It began with use of naked eyes which are natural detectors for light waves, but evolved dramatically with the advent of the telescope. Galileo turned the recently invented optical telescope to the heavens and revolutionised astronomy forever (figure 1). Over the times since then, optical telescopes have evolved from the simple ones that Galileo used to the large, sophisticated facilities that modern day astronomers employ. Figure 1: Galileo and the telescope, c.1609 There are two main factors that drive the need for larger telescopes. A bigger telescope is able to collect more light, hence can see fainter sources i.e., they are more sensitive and can see more objects in the Universe.
    [Show full text]
  • Thesis Template
    FREE SPACE OPTICAL COMMUNICATIONS WITH HIGH INTENSITY LASER POWER BEAMING DANIEL EDWARD RAIBLE Bachelor of Science in Electrical Engineering Cleveland State University May 2006 Master of Science in Electrical Engineering Cleveland State University May 2008 submitted in partial fulfillment of requirements for the degree DOCTOR OF ENGINEERING at the CLEVELAND STATE UNIVERSITY June 2011 This dissertation has been approved for the Department of Electrical and Computer Engineering and the College of Graduate Studies by ________________________________________________ Dissertation Committee Chairperson, Taysir H. Nayfeh ________________________________ Department/Date ________________________________________________ Nigamanth Sridhar ________________________________ Department/Date ________________________________________________ Ana V. Stankovic ________________________________ Department/Date ________________________________________________ Petru S. Fodor ________________________________ Department/Date ________________________________________________ John F. Turner ________________________________ Department/Date This work is dedicated to the memory of my dearest friends, Michael Matthews and Jason Adams. It would have been great, and I miss you. ACKNOWLEDGEMENTS There are many people that I would like to express my gratitude towards, starting with my advisor Dr. Taysir Nayfeh, for affording me the opportunity to pursue my education through working at the Industrial Space Systems Laboratory, and for helping me develop my skills as a researcher. I would like to graciously thank my committee for their time and review starting with Dr. Nigamanth Sridhar for providing his background in wireless systems, Dr. Ana V. Stankovic for offering her knowledge in power electronics and systems, Dr. Petru S. Fodor and Dr. John F. Turner for supplying their expertise in optics and general physics, and finally Dr. Joseph A. Svestka for serving as a non-voting member and for sharing his expertise in systems engineering and mathematical programming.
    [Show full text]
  • Optical Wireless Communication Channel Measurements and Models
    Heriot-Watt University Research Gateway Optical Wireless Communication Channel Measurements and Models Citation for published version: Al-Kinani, A, Wang, C-X, Zhou, L & Zhang, W 2018, 'Optical Wireless Communication Channel Measurements and Models', IEEE Communications Surveys and Tutorials. https://doi.org/10.1109/COMST.2018.2838096 Digital Object Identifier (DOI): 10.1109/COMST.2018.2838096 Link: Link to publication record in Heriot-Watt Research Portal Document Version: Peer reviewed version Published In: IEEE Communications Surveys and Tutorials Publisher Rights Statement: © 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. General rights Copyright for the publications made accessible via Heriot-Watt Research Portal is retained by the author(s) and / or other copyright owners and it is a condition of accessing these publications that users recognise and abide by the legal requirements associated with these rights. Take down policy Heriot-Watt University has made every reasonable effort to ensure that the content in Heriot-Watt Research Portal complies with UK legislation. If you believe that the public display of this file breaches copyright please contact [email protected] providing details, and we will
    [Show full text]
  • Basic Principles of Fiber Optics
    Basic Principles of Fiber Optics http://www.corningcablesystems.com/web/college/ fibertutorial.nsf/fibman?OpenForm Copyright ©2006 Corning Incorporated Basic Principles of Fiber Optics Table of Contents Introduction ............................................................................................................................................ 3 What is Fiber Optics? .......................................................................................................................... 4 Fiber Benefits ...................................................................................................................................... 4 Long Distance Signal Transmission ............................................................................................... 4 Large Bandwidth, Light Weight, and Small Diameter ..................................................................... 4 Long Lengths .................................................................................................................................. 5 Easy Installation and Upgrades ...................................................................................................... 5 Non-Conductivity ............................................................................................................................ 5 Security ........................................................................................................................................... 6 Designed for Future Applications Needs .......................................................................................
    [Show full text]
  • An Introduction to Astronomical Photometry Using Ccds
    An Introduction to Astronomical Photometry Using CCDs W. Romanishin University of Oklahoma [email protected] The lastest version of this book (in pdf format) can be downloaded from http://observatory.ou.edu This is version wrccd4a.pdf built on: March 31, 2002 2 Foreword/ Thanks / Production Details This book began as a set of lecture notes for a junior/senior course entitled \Observatory Meth- ods" that I teach each spring at the University of Oklahoma (OU). The book is intended as an introduction for the college astrophysics major to photometry in the optical region of the spectrum of astronomical objects using CCD imaging from groundbased telescopes. Of course, in these times of Giga-buck satellite telescopes of various sorts, groundbased optical astronomy is only a part of observational astronomy. Within groundbased optical astronomy, spectroscopy, only briefly men- tioned here, probably takes up as much or more telescope time as photometry. That said, it is still obvious that imaging photometry is an important part of observational astronomy. With the ready availablity of inexpensive CCDs and computer power, even a small telescope can provide an important \hand on" learning experience not available with remote satellite observatories. This book represents knowledge I have accumulated over 20 years of observing with a wide range of telescopes. My PhD disseration, finished in 1980, was probably one of the last observational dissertations to use photographic emulsions as the primary detector. Since then I have observed with various photomultiplier detectors and many different CCD systems, on telescopes ranging in aperture from 0.4 to 10 meters.
    [Show full text]
  • What Can We Learn from the Electromagnetic Spectrum?
    GENERAL I ARTICLE What can we Learn from the Electromagnetic Spectrum? A W Joshi and A 10k Kumar Electromagnetic radiation is all around us, and essential for A W Joshi was at the the survival of alllifeforms. It provides valuable informa­ Department of Physics, University of Pune, Pune. tion about the physical world around us, feeds us by provid­ ing energy to plants, allows us to maintain human metabo­ Alok Kumar is at the lism, and cures us of various diseases. This article deals Department of Physics, with the various properties of electromagnetic radiation, its State University of New sources and detectors, its nature, and its uses. A brief York, USA. discussion on the absorption spectrum of the Earth's atmo­ sphere and the atmospheric windows, and celestial objects seen through optical and radio telescopes is also provided. Introduction Our perception of the physical world around us is largely based on our interaction with the range of the electromagnetic radia­ tion (EMR) that is called visible light. Most objects scatter visible light that enters through the irises of our eyes, falls on our retina, interacts with the retinal pigment that eventually causes an electrical pulse that is transmitted to our brain through optic nerves. We feel warm in front of a fire partly because of a type of electromagnetic radiation that is called infrared radiation. Simi­ larly; our skin gets tanned when exposed to sunlight because of certain electromagnetic radiation called ultraviolet. However, we cannot· see, feel, or detect X-rays using our sense organs. This radiation does penetrate and affect our body.
    [Show full text]
  • Characterization of Fog and Snow Attenuations for Free-Space Optical Propagation
    JOURNAL OF COMMUNICATIONS, VOL. 4, NO. 8, SEPTEMBER 2009 533 Characterization of Fog and Snow Attenuations for Free-Space Optical Propagation Muhammad Saleem Awan*, Laszlo Csurgai Horwath†, Sajid Sheikh Muhammad**, Erich Leitgeb*, Farukh Nadeem*, Muhammad Saeed Khan* *Graz University of Technology, Graz, Austria †Budapest University of Technology and Economics, Budapest, Hungary **National University of Computer and Emerging Sciences (FAST-NU), Lahore, Pakistan Email: [email protected] Abstract— Free Space Optics (FSO) is now a well backbone and the end users. Recently FSO is identified as established access technology, better known for its an attractive alternative to complement microwave robustness in transmitting large data volumes in an energy (mmW) and radio frequency (RF) links within the access efficient manner. However the BER performance of a FSO network for the backhaul traffic [1, 2]. Although, FSO ground-link is adversely affected by cloud coverage, harsh communication links are best served for short distances weather conditions, and atmospheric turbulence. Fog, clouds but such links are successfully tested for relatively long and dry snow play a detrimental role by attenuating optical energy transmitted in terrestrial free-space and thus distance communication links (from medium to long decrease the link availability and reliability. We measured ranges) between e.g., optical ground stations OGS and the time variation of received optical signal level during terminals in space (un-manned aerial vehicles UAVs, high
    [Show full text]
  • The Book on the Technologies of Polymicro
    The Book on the technologies of Polymicro • Specialty Optical Fiber • Flexible Fused Silica Capillary Tubing • Fiber Optic and Capillary Assemblies • Fused Silica and Quartz Micro-Components www.polymicro.com Forward Welcome to Polymicro Technologies’ catalog. We pride ourselves on the quality of our products and our service. This catalog represents an effort to provide a tool to aid our customers in understanding our products, the materials with which we work, and the capabilities we can provide. We are unique in our ability to work with the customer from design, to prototype, to large-scale production. We provide a breadth of expertise unparalleled in the industry with custom preform capabilities, tower capabilities to draw fiber and tubing, laser capabilities to create micro-components, and assembly capabilities to put it all together. It is our goal to continually improve our products, our capabilities, and ourselves to meet the challenges of our customers’ technological requirements. Production, Engineering, and Sales at Polymicro are dedicated to your success. We believe firmly in the basic idea that our customers’ success translates to our success. For the latest in new procedures, application notes, and general information visit our website. In spite of our best efforts, this catalog is not perfect. We welcome any recommendations or suggestions. We are here to meet your needs. Thank you THE PEOPLE OF POLYMICRO TECHNOLOGIES Polymicro Technologies, a Subsidiary of Molex 18019 North 25th Avenue Phoenix, Arizona 85023-1200 Phone: (602) 375-4100 Fax: (602) 375-4110 e-mail: [email protected] URL:http://www.polymicro.com Technical Data Disclaimer The information given herein, including drawings, illustrations and schematics (that are intended for illustration purposes only), is believed to be reliable.
    [Show full text]