DOCSLIB.ORG

D.G.W. Auctioneers Inc. 760 Kifer Road, Sunnyvale, CA

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
D.G.W. Auctioneers Inc. 760 Kifer Road, Sunnyvale, CA D.G.W. Auctioneers Inc. 760 Kifer Road, Sunnyvale, CA. 94086. Phone: (408) 245-1863 Fax: (408) 245-1283 www.dgwauctioneers.com FREE CATALOG AVAILABLE ONLINE Saturday, July 3, 2010 at 10:00 AM A 18% Buyer’s Premium is charged on All Purchases Discounted to 15% with payment by cash or check READ AUCTION RULES, ESPECIALLY WITH REGARDS TO OBTAINING A BIDDER NUMBER, PAYMENT & REMOVAL OF PURCHASED LOTS AUCTION CONDUCTED PURSUANT TO SECTION 2328 OF THE COMMERCIAL CODE AND SECTION 535 OF THE CALIFORNIA STATE PENAL AND CIVIL CODES Absentee bids: D.G.W. Auctioneers will execute bids for absentee bidders submitted in advance of the sale. D.G.W. Auctioneers assumes no responsibility for failure to execute any bid, and absentee bids are subject to the conditions of the sale. Absentee bidders should call the D.G.W. Auctioneers the day following the sale after 10:00 AM to ascertain if they are the successful bidder. No Warranty – All Items Are Sold “AS IS”: D.G.W. Auctioneers & the consignor do not warrant any lot to be merchantable or to be suited to any purpose, and they do not assume any risk, liability or responsibility to any person as to authenticity, genuiness, culture, source, origin, attribution, period, purpose or measurement of any lot. House Clearances: Entire house clearances can be arranged and effects disposed of as agreed with the vendors or executors. Removal: Please DO NOT REMOVE any item purchased until after the auction, at which time an attendant will assist you if required. Items not removed within the published collection times will incur a storage charge of $5.00 per day per lot. Payment: to be made on Auction Day Collection times: Saturday, July 3, 2010 until 5 PM *** NO COLLECTION ON SUNDAY, JULY 4, 2010 *** BUYERS MUST PROVIDE THEIR OWN PACKING MATERIALS. FOR THE REMOVAL OF HEAVY ITEMS, BUYERS MUST PROVIDE THEIR OWN ASSISTANTS. UPCOMING AUCTIONS: Public General Estates Auction: **Saturday, July 17, 2010** Public General Estates Auction: **Saturday, July 31, 2010** D. G. W. AUCTIONEERS INC. 1 Saturday July 3, 2010 1. GROUP OF ASSTD. PRINTING 18. FRAMED PAINTING, "ALONG THE BLOCKS. SHORE, MONTEREY". SIGNED L/R, ANNE BAILHACHE. (CALIFORNIA 2. GROUP OF ASSTD. 45 RPM RECORDS ARTIST, ANNE DODGE BAILHACHE, SOME WITH PICTORIAL SLEEVES. 1879 - 1968). 3. C. 1930S CIRCULAR SIDE TABLE / 19. WHITING STERLING SILVER GRAVY STAND. LADLE, "LILY" PATTERN. (APPROX. 7" LONG). 4. PORTFOLIO WITH ASSTD. JAPANESE WOOD BLOCK PRINTS INCL. TOSHI 20. STERLING SILVER FOOTED SUGAR YOSHIDA, SAITO, RYOHEI ETC. AND CREAMER WITH SCROLL HANDLES, GILT WASH INTERIOR 5. REED & BARTON STAINLESS STEEL WITH ASSOCIATED STERLING SILVER FLATWARE SERVICE IN CASKET. TRAY. 6. ADJUSTABLE PIANO STOOL WITH 21. CARVED JASPER OWL WITH GLASS UPHOLSTERED SEAT AND TASSEL EYES AND SILVER FEET ON FRINGE, BALL AND CLAW FEET. PETRIFIED WOOD PLINTH. (APPROX. 4" TALL). 7. C.F. ZIMMERMAN'S MINIATURE AUTO HARP. 22. (5) GORHAM "VERSAILLES" STERLING SILVER FORKS. 8. FENDER "SQUIER" MINI ELECTRIC GUITAR WITH CASE. 23. (7) STERLING SILVER SPOONS AND A CASTLE FORM LIDDED STAMP BOX 9. PAIR OF GILT METAL BALINESE MARKED STERLING. STYLE TABLE LAMPS. 24. BLACK STARR AND FROST STERLING 10. EARLY 20TH C. MAHOGANY CIRCULAR SILVER RETICULATED COMPOTE. STAND WITH SINGLE DRAWER AND A (APPROX. 2.5" TALL, 6" DIA). SHELF. 25. GERMAN SILVER VINTAGE MESH 11. SETH THOMAS "OGEE" CLOCK IN PURSE WITH SILVER FRAME FLAME MAHOGANY CASE. STAMPED, GERMAN SILVER J.S CO. GERMAN SILVER. B & B BESSIE 12. C. 1930S TRIPTYCH BEVELED BROWN, WITH LINK HANDLE. DRESSER TOP MIRROR WITH CHERUBS (APPROX. 6" X 6"). AND URN DECORATED PANELS. 26. GORHAM STERLING SILVER OVAL 13. VICTORIAN OAK MARBLE TOP BOWL, RIM DECORATED WITH CONSOLE TABLE. FOLIATE SCROLLS AND BELL FLOWERS. (APPROX. 12.5" X 8"). 14. PAIR OF 3-LIGHT GILT BRONZE WALL SCONCES. 27. (8) PCS. OF STERLING SILVER INCL. 6 DEMI TASSE SPOONS AND 15. EARLY 20TH C. MAHOGANY 6-DRAWER (2) PAIRS OF SUGAR NIPS. SIDEBOARD. 28. TIFFANY & CO. STERLING SILVER 16. MAHOGANY OVAL FRAMED BEVELED BOWL. (DIAMETER: 6 1/8"). MIRROR. 29. (6) MAPPIN & WEBB STERLING 17. EARLY 20TH C. WRITING BOX WITH SILVER DEMI TASSE SPOONS, FITTED INTERIOR. "MODELS FROM CHARLES DICKENS NOVELS", IN PRESENTATION CASE. ITEMS MUST BE "PAID" FOR, AFTER AUCTION. UNCOLLECTED ITEMS SUBJECT TO $5/LOT/DAY STORAGE FEES. BRING YOUR OWN ASSISTANTS TO MOVE HEAVY ITEMS D. G. W. AUCTIONEERS INC. 2 Saturday July 3, 2010 30. GROUP OF STERLING SILVER SPOONS 43. PAIR OF 4-DRAWER MINI UTILITY INCL. SHREVE & CO., MANCHESTER, CHESTS. REED & BARTON ETC. (8). 44. WWII NAVAL FLYING JACKET AND 31. (6) STERLING SILVER ITEMS; HELMET. CUPS, COASTERS & NAPKIN RING. 45. (2) LOUIS XVI STYLE BALLOON 32. GROUP OF STERLING SILVER ITEMS BACK ARM CHAIRS. INCL. GORHAM CUP, WEBSTER DISH, (2) LADLES AND A SUGAR BOWL 46. 3-SHELF BOOKCASE. WITH BLUE GLASS INSERT. 47. FRAMED OIL ON CANVAS, COUNTRY 33. (8) ASSTD. STERLING SILVER SCENE WITH WINDMILL. FLATWARE ITEMS INCL. DURGIN SUGAR NIPS, PORTER BLANCHARD 48. COLLECTION OF 19TH AND 20TH C. LADLE, (3) SHREVE & CO. BUTTER LEATHER BOUND BOOKS. SPREADERS, SHREVE & CO. PICK ETC. 49. STERLING SILVER OVERLAID STOPPERED DECANTER AND AN 34. INTERNATIONAL STERLING SILVER ASSOCIATED SILVER OVERLAID GRAVY BOAT WITH UNDERPLATE, STOPPER. SCROLL HANDLE WITH ACANTHUS LEAF DECORATION. "LORD 50. ART DECO STYLE FROSTED GLASS SAYBROOK" PATTERN. HOOD ORNAMENT ON WOODEN PLINTH. (OVERALL: 9" TALL). (HEAD: 3.5" 35. GROUP OF STERLING SILVER ITEMS X 6.5"). INCL. MATCH BOX HOLDERS, NUT DISHES, KNIFE, FORK ETC. 51. (2) M.J. HUMMEL FIGURES, BOY AND A GIRL WITH UMBRELLAS. 36. 19TH C. FRAMED OIL ON CANVAS, (APPROX. 8" TALL, 8" WIDE). COWS BY THE RIVER, SIGNED LOWER RIGHT, H.R. FISH 1891. 52. BRONZE FIGURE, SCHOOL GIRL ON A (HENRIETTA RIDDELL FISH, 1856 - WINDY DAY, MARKED CADO (?). 1925, CALIFORNIA ARTIST). (APPROX. 8" TALL). (SIGHT: APPROX. 37.5" X 23.5"). 53. "MARQUIS BY WATERFORD" CRYSTAL 37. SHERATON STYLE WRITING DESK PITCHER AND A PAIR OF GERMAN WITH 3-DRAWER FRIEZE. MIKASA CANDLE STICKS. 38. 19TH C. REGINA SHEET DISC MUSIC 54. PAIR OF STERLING SILVER CANDLE BOX WITH (9) SHEET DISCS. STICKS (WEIGHTED) AND A GUMPS STERLING PEDESTAL CANDY DISH. 39. BRONZE DOG FIGURAL DOOR STOP AND A VINTAGE GRINDER FITTED ON 55. GORHAM STERLING SILVER 5-LIGHT A 4-DRAWER MINIATURE CHEST. CANDELABRUM. 40. KITCHEN AID MIXER WITH (2) 56. (2) JAPANESE IMARI PORCELAIN BOWLS AND MIXING PADDLES PLUS A BOWLS, LOBED SIDES, DECORATED SET OF (4) MIXING BOWLS. WITH DRAGONS AND FLOWERS. (DIAMETER: APPROX. 7"). 41. (4) ASSTD. LADIES' HAND BAGS. 57. (5) GOEBEL FIGURINES, MARKED 42. C. 1940S PIANO STOOL WITH M.J. HUMMEL. SWIVEL SEAT. 58. WATERBURY PORCELAIN CASED CLOCK. (APPROX. 11" TALL). ITEMS MUST BE "PAID" FOR, AFTER AUCTION. UNCOLLECTED ITEMS SUBJECT TO $5/LOT/DAY STORAGE FEES. BRING YOUR OWN ASSISTANTS TO MOVE HEAVY ITEMS D. G. W. AUCTIONEERS INC. 3 Saturday July 3, 2010 59. ORIENTAL ROSEWOOD GAME BOX WITH 75. CHINESE FAMILLE ROSE 12-PANEL GAMING PIECES. BOWL, RAISED ON AN OCTAGONAL BASE, TURQUOISE GLAZED 60. EARLY 20TH C. FRAMED BEVELED INTERIOR. c. 1900. (APPROX. 6 MIRROR. 3/4" DIA). 61. VICTORIAN 2-DOOR GLASS FRONT 76. (11) THEODORE HAVILAND HAND BOOKCASE WITH 2 DRAWERS. PAINTED AND TRANSFER DECORATED "FISH" PLATES. 62. EARLY 20TH C. WHITE MARBLE TOP 2-DRAWER WASH STAND WITH GREEN 77. OAK AND BRASS DOUBLE SIDED TILED BACK SPLASH. HINGED BOX WITH HANDLE, LOCK AND KEY. c. 1910. 63. TALL POLYCHROME CARVED WOOD FIGURE, HORN BLOWER WITH A BACK 78. COLLECTION OF GLASS AND SIDE CABINET. (APPROX. 84" PORCELAIN BELLS INCL. TALL). WATERFORD. 64. C. 1920S MAHOGANY 3-SHELF WALL 79. COLLECTION OF BEATRIX POTTER DISPLAY. FIGURES, BESWICK, ENGLAND. (APPROX. 12). 65. 19TH C. ENGLISH IRONSTONE SERVING PIECES WITH GILT 80. ENGLISH OYSTER WALNUT TANTALUS DECORATED FOLIATE SCROLL CASE WITH FITTED INTERIOR. HANDLES INCL. A COMPOTE, SQUARE INLAID BANDING AND FOLIATE PEDESTAL PLATE AND (2) OVAL SCROLLING RESERVES. c. 1900. PEDESTAL PLATES. WHITE GROUND, PEACH BORDER AND BLUE FLORAL 81. CONTEMPORARY ORIENTAL ROSEWOOD GARLAND DESIGN. CHINA CABINET. 66. SHERATON STYLE MAHOGANY 2- 82. BRONZE SAMURAI FIGURE. (APPROX. DRAWER SIDEBOARD. 15.5" TALL). 67. MAHOGANY 2-DOOR CABINET. 83. MID 20TH C. SINGLE DRAWER DROP SIDE DESK, "OLD COLONY FURN. 68. GEORGE III STYLE MAHOGANY BREAK CO." WITH ASSOCIATED CHAIR. FRONT BOOKCASE, FIRST HALF, 20TH C. 84. CONTEMPORARY UPHOLSTERED OVERSIZED OTTOMAN. 69. HAND MADE ORIENTAL RUNNER. (APPROX. 9.5' X 2.5'). 85. VICTORIAN ARM CHAIR WITH NEEDLEPOINT UPHOLSTERY. 70. PAIR OF 19TH C. ARM CHAIRS. 86. BRONZE FIGURAL TABLE LAMP WITH 71. CARVED HARD STONE AZTEC FACE. TIFFANY STYLE SHADE. (APPROX. 16" TALL). 87. GROUP OF CRYSTAL AND PRISM WALL 72. FLORAL UPHOLSTERED ARMCHAIR. SCONCE PARTS, DROP CRYSTALS ETC. 73. DANISH TEAK BASE AND GLASS TOP COFFEE TABLE. 88. FRAMED OIL ON BOARD, NATIVE AMERICAN INDIAN, SIGNED RIGHT. 74. (5) DECORATIVE NORITAKE SIDE (APPROX. 15.5" X 19.5"). PLATES AND A COMPOTE. 89. OAK 4-SHELF BOOKCASE WITH GALLERY TOP. ITEMS MUST BE "PAID" FOR, AFTER AUCTION. UNCOLLECTED ITEMS SUBJECT TO $5/LOT/DAY STORAGE FEES. BRING YOUR OWN ASSISTANTS TO MOVE HEAVY ITEMS D. G. W. AUCTIONEERS INC. 4 Saturday July 3, 2010 90. FRAMED OIL ON CANVAS, "PEACOCK" 107. PAIR OF GORHAM STERLING SILVER SIGNED L/R, IBARZ. (MIGUEL CANDLE HOLDERS. IBARZ, SPAIN, 1920 - 1987). (APPROX. 23.5" X 31"). 108. IRIDESCENT PURPLE GLASS VASE. (APPROX. 8 1/4" TALL). 91. C. 1930S OAK 4-DRAWER CHEST. 109. (2) MOSER STYLE JEWELED GOBLETS 92. PAIR OF DROP CRYSTAL 4-LIGHT WITH SPIRAL STEMS AND A TABLE LAMPS. CRANBERRY GLASS BOWL WITH ENAMEL AND GILT DETAIL. 93. 19TH C. PINE CIRCULAR OCCASIONAL TABLE ON TRIPOD 110.
Load more

Recommended publications
  • SATURDAY, AUGUST 28, 2021 at 10:00 AM
    www.reddingauction.com 1085 Table Rock Road, Gettysburg, PA PH: 717-334-6941 Pennsylvania's Largest No Buyers Premium Gun Auction Service Your Professional FireArms Specialists With 127+ Combined Years of Experience Striving to Put Our Clients First & Achieving Highest Prices Realized as Possible! NO RESERVE – NO BUYERS PREMIUM If You Are Interested in Selling Your Items in an Upcoming Auction, Email [email protected] or Call 717- 334-6941 to Speak to Someone Personally. We Are Consistently Bringing Higher Prices Realized Than Other Local Auction Services Due to Not Employing a Buyer’s Premium (Buyer’s Penalty). Also, We Consistently Market Our Sales Nationally with Actual Content For Longer Periods of Time Than Other Auction Services. SATURDAY, AUGUST 28, 2021 at 10:00 AM PLEASE NOTE: -- THIS IS YOUR ITEMIZED LISTING FOR THIS PARTICULAR AUCTION PLEASE BRING IT WITH YOU WHEN ATTENDING Abbreviation Key for Ammo Lots: NIB – New in Box WTOC – Wrapped at Time of Cataloging (RAS Did Not Unwrap the Lots With This Designation in Order to Verify the Correctness & Round Count. We depend on our consignor’s honesty and integrity when describing sealed boxes. RAS Will Offer No Warranties or No Guarantees Regarding Count or the Contents Inside of These Boxes) Any firearms with a “R” after the lot number means it is a registrable firearm. Any firearms without the “R” is an antique & Mfg. Pre-1898 meaning No registration is required. Lot #: 1. Winchester – No. W-600 Caged Copper Room Heater w/Cord – 12½” Wide 16” High w/Gray Base (Excellent Label) 2. Winchester-Western – “Sporting Arms & Ammunition” 16” Hexagon Shaped Wall Clock – Mfg.
    [Show full text]
  • CX202 10” CONTRACTORS TABLE SAW with RIVING KNIFE User Manual
    CX202 10” CONTRACTORS TABLE SAW WITH RIVING KNIFE User Manual TABLE OF CONTENTS General Safety Instructions ..................................................................................... 3 Specific Safety Instructions ..................................................................................... 4 CX202 Features ...................................................................................................... 5 Physical Features ................................................................................................... 6 Set Up ..................................................................................................................... 7 Un-Packing & Inventory .......................................................................................... 7 Proper Grounding ................................................................................................... 8 Assembly ................................................................................................................ 9 Installing the Saw Blade .......................................................................................... 12 Blade Guard Spreader ............................................................................................ 13 Table Insert ............................................................................................................. 13 Installing the Blade Guard ....................................................................................... 13 Basic Controls ........................................................................................................
    [Show full text]
  • Contract N40085-12-B-0019 Navfac Specification No. 05
    CONTRACT N40085-12-B-0019 NAVFAC SPECIFICATION NO. 05-12-0019 ADDITION OF HEADS TO BUILDING M-112 AT THE MARINE CORPS BASE, CAMP LEJEUNE, NORTH CAROLINA DESIGN BY: The Walker Group Architecture, Inc. New Bern, North Carolina A/E Contract: N40085-08-D-8416 SPECIFICATION PREPARED BY: The Walker Group Architecture, Inc. Date: June 4, 2012 SPECIFICATION APPROVED BY: B.R. Marshburn, P.E., Director Design Branch, Public Works Division J. W. Carson, Commander, CEC, U.S. Navy for Commander, Naval Facilities Engineering 05-12-0019 Additions of Heads to Building M-112 05120019 PROJECT TABLE OF CONTENTS DIVISION 01 - GENERAL REQUIREMENTS 01 11 00 SUMMARY OF WORK 01 14 00 WORK RESTRICTIONS 01 20 00 PRICE AND PAYMENT PROCEDURES 01 30 00 ADMINISTRATIVE REQUIREMENTS 01 31 50 TRANSFER AND ACCEPTANCE OF MILITARY REAL PROPERTY 01 32 16 CONSTRUCTION PROGRESS DOCUMENTATION 01 33 00 SUBMITTAL PROCEDURES 01 35 29 SAFETY AND OCCUPATIONAL HEALTH REQUIREMENTS 01 42 00 SOURCES FOR REFERENCE PUBLICATIONS 01 45 10 QUALITY CONTROL 01 50 00 TEMPORARY FACILITIES AND CONTROLS 01 54 40 PROCEDURES FOR ENTRY INTO DANGEROUS TRAINING AREAS 01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS 01 78 23 OPERATION AND MAINTENANCE DATA DIVISION 02 - EXISTING CONDITIONS 02 41 00 DEMOLITION 02 82 30 RE-ESTABLISHING VEGETATION DIVISION 03 - CONCRETE 03 30 53 MISCELLANEOUS CAST-IN-PLACE CONCRETE DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES 06 10 00 ROUGH CARPENTRY DIVISION 07 - THERMAL AND MOISTURE PROTECTION 07 21 16 MINERAL FIBER BLANKET INSULATION 07 40 00 SOLID VINYL SIDING WORK 07 92 00
    [Show full text]
  • ID 254 698 Stationary Engineers Apprenticeship. Related Training
    DOCUMENT- RESUME ID 254 698 CE 040 974 TITLE Stationary Engineers Apprenticeship. Related Training Modules. 4.1-4.5 Tools. ,INSTITUTION Lane Community Coll., Eugene,Oreg. SPONS AGENCY Oregon_State Dept. of Education, Salem. PUB DATE [82) NOTE 100p.; For related documents,osee CE 040 972-990. Many of the modules are duplicated in CE 040 994, PUB TYPE Guides.- Classroom Use MateTials (For Learner) (051) EDRS PRICE MF01/PC04 Plus Postage. DESCRIPTORS *Apprenticeships; Behavioral ObjectiveS;. *Hand Tools; Individualized Instruc4ion; Job Skint; Learning Modules; *Measurement Equipment; Postsecondary Education; *Trade and Industrial Education IDENTIFIERS *Stationary Engineering ABSTRACT. This packet of five learning modules on tools is one of .20 such packets developed for apprenticeship training for stationary engineers. Introductory materials ate a complete listing of all available modules and a supplementary reference list. Each module contains someor all of these components: a lesson goal, performance indicators, study guide (a checklist of steps the student should complete), an introduction, information sheets, a vocabulary list, assignment sheet, job sheet, self-assessment, self-assessment answers, post-assessment, and instructor post-i'ssessment answers. The five training modules cover measuring, layout, and leveling tools.;" boring and drilling tools; cutting. tools,' files, and abrasives; holding and fastening tools; and fastening devices. (YLB) LL 0. 4 0 *****************'****************************************************** Reproductions
    [Show full text]
  • Common Hand Tools
    Common Hand Tools Lesson 1: Common Hand Tools for Common Measurement Tools Woodworking Measurement tools are used to ensure accuracy and Before beginning a woodworking project, workers must consistency of a project. They are used for determining be familiar with shop safety rules and knowledgeable linear measurements such as length and width and area about common hand tools. Hand tools are usually measurements such as square feet. They are also used used for smaller projects or where power tools or for checking if work is square or level. Some common machines would be inefficient. For example, when measurement tools are as follows. The basics are smoothing a small piece of lumber, a hand plane is introduced here and more information is provided more practical than a power plane. An agricultural in Unit III, Lesson 1: Common Measurements and mechanics shop should have a good selection of hand Measurement Tools. tools to accommodate a large variety of woodworking projects. A tape measure is typically used for making straight measurements and taking measurements around Basic Shop Safety Procedures objects (circumference). Tape measures are available that use the U.S. customary system, metric system, and The following are general safety procedures that apply a combination of the two systems. See Figure 1.1. to almost every work situation. • Adhere to instructions. o Read labels and warnings on containers and tools. Figure 1.1 - Tape Measures o Follow the manufacturer’s recommendations for use and maintenance of a specific tool. o Pay attention to signs posted in the work area. o Follow the instructor’s directions.
    [Show full text]
  • Operators Manual MODEL NO. 113.197110
    F "_L. Save This Manual For Future Reference Operators Manual MODEL NO. 113.197110 OR 113,197150 10" RADIAL SAW WITH LEG SET Serial Number Model and serial numbers CRRFTSMRN may be found at the rear of the base. You should record both model and serial number in a safe place for future use. 10-INCH RADIAL SAW CAUTION: • Assembly READ ALL • Operating INSTRUCTIONS • Repair parts CAREFULLY Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A. Part No. SP5249 Printed in U.S.A. FULL ONE YEAR WARRANTY ON CRAFTSMAN RADIAL SAW It within one year from the date of purchase, this Craftsman Radial Saw fails due to a defect in material or workmanship, Sears will repair it, free of charge. WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT THROUGHOUT THE UNITED STATES. This warranty applies only while this product is used in the United States. This warranty gives you specific legal rights and you may also have other rights which vary from stale to state. SEARS, ROEBUCK AND CO., DEPT. 698/731A Sears Tower, Chicago, IL 60684 Table of Contents Section Title Page Numbers Safety Information ............................................ 3-6 Putting Your Saw Together .................................... 7-12 Location and Function of Controls ............................ 13-16 Alignment of the Blade ...................................... 17-33 Electrical Connections ....................................... 34-35 Crosscutting ................................................ 36-42 Ripping ...................................................
    [Show full text]
  • The Art of Joinery Published by Lost Art Press LLC in 2013 26 Greenbriar Ave., Fort Mitchell, KY 41017, USA Web
    The Art Of Joinery Published by Lost Art Press LLC in 2013 26 Greenbriar Ave., Fort Mitchell, KY 41017, USA Web: http://lostartpress.com Title: The Art of Joinery Authors: Joseph Moxon, commentary by Christopher Schwarz Publisher: Christopher Schwarz Distribution: John Hoffman Editor: Megan Fitzpatrick Design & Layout: Linda Watts Index: Suzanne Ellison Cover: Christopher Schwarz Copyright © 2013 by Lost Art Press LLC ISBN: 978-0-9850777-7-8 ALL RIGHTS RESERVED No part of this book may be reproduced in any form or by any electronic or mechanical means including information storage and retrieval systems without permission in writing from the publisher, except by a reviewer, who may quote brief passages in a review. Printed and bound in the United States of America. The Art Of Joinery By Joseph Moxon with commentary by Christopher Schwarz zå Second Edition iv Table of Contents Introduction to the Second Edition ........................v The Art of Joinery, Edited with Commentary ....... 1 The Plates .............................................................93 The Art of Joinery, Unedited ............................... 98 Select Plates from André Félibien .......................141 Index ..................................................................153 v Introduction to the Second Edition Joseph Moxon’s “Mechanick Exercises” is more than just a curiosity for his- torians of the craft of woodworking. The woodworking tools that Moxon describes and the processes he explains have remained remarkably unchanged during the intervening centuries. To be sure, we might now use fancier mate- rials for some of our tools – investment-cast bronze, ductile iron, A2 steel. But a fore plane is still a fore plane, and it is still used in the same manner to make rough boards into smooth ones.
    [Show full text]
  • Tool Shed Number 96 April 1997
    HED NUMBER 96 APRIL 1997 • • • A Journal of Tool Collecting published by CRAFTS of New Jersey • • • TRY SQUARE . AND .BEVEL COMBINATIONS by Donald 8. Johnstone n my article on bevels in the Bevel." It was manufactured by November 1996 Too/Shed I Stackpole and Mulliken of Boston. Idescribed several versions of It differs from the Halsted and the standard carpenter's bevel. In Ackerman design only by the this article I will cover two types inclusion of a semicircular slot of combination tools that can with a graduated scale on the brass function as either a try square or a stock The slot enables a setscrew bevel. The first is the combination attached to an extension of the try square and bevel that has a bevel blade to slide freely through fixed square blade in combination the slot as the blade is adjusted. with an adjustable bevel blade. The unusual markings along the The second is the adjustable bevel scale are not degrees, as normally that can be set conveniently at a 90 seen on a protractor. Instead, there degree angle for use as a try are the figures 4, 5, 6, 7, and 8 square, but its use for this purpose along the slot at varying distances would have been peripheral to its from one another. When the blade primary purpose as a bevel. With Photo 1. The Halsted-Ackerman Square is set parallel to the slanted top of the second type the square is just the stock, it forms a 45 degree one of the bevel settings. There are so many of both types angle with the edge of the stock, and the reading on the that this article can only describe a few of the better-known scale is 4.
    [Show full text]
  • The Multitalented Combination Square a Whole Lot of Tool in One Small Package by Andy Rae
    The Multitalented Combination Square A whole lot of tool in one small package By Andy Rae Far more than just a tool to a combo square to true up that, I’ll discuss the two arenas in for checking “square,” the workpieces, lay out joints, and which the tool excels: measuring combination square is a do-all set up shop machines–all with a and laying out. Measuring shop tool. With its sliding ruler degree of precision that elevates includes performing machine locked to the head, you can use its status over other tools. setups, such as squaring bits it as a depth gauge, a marking To ensure this level of accuracy, and blades to tables and fences, gauge, a miter square, and a try as well as checking joints and square. Loosening the lock in the acquire a square that’s worthy of assemblies for accuracy. Laying head releases the rule for use yourthe first work. order Not of all business combination is to out involves making marks on as a straightedge or ruler. In a squares share the same quality your work, from drawing parallel pinch, you can employ the head and ease of use. In this article, lines and angles to marking as a small level, and a sharp awl we’ll take a look at the parts and centerlines and pinpointing tucked inside is always at the nomenclature of combination hardware locations. Read on to ready for marking. Thanks to squares, and I’ll describe what to these attributes, you can turn look for in a good tool.
    [Show full text]
  • The Callendar Effect Guy Stewart Callendar in 1934, About the Time He Turned His Attention to the CO2- Climate Question
    The Callendar Effect Guy Stewart Callendar in 1934, about the time he turned his attention to the CO2- climate question. The Callendar Effect The Life and Work of Guy Stewart Callendar (1898–1964), the Scientist Who Established the Carbon Dioxide Theory of Climate Change James Rodger Fleming American Meteorological Society The Callendar Effect: The Life and Work of Guy Stewart Callendar (1898–1964), the Scientist Who Established the Carbon Dioxide Theory of Climate Change © 2007 by James Rodger Fleming. Permission to use figures, tables, and brief excerpts from this book in scientific and educational works is hereby granted provided the source is acknowledged. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. Published by the American Meteorological Society 45 Beacon Street, Boston, Massachusetts 02108 Also available from AMS Books: The Papers of Guy Stewart Callendar, Digital Edition on DVD, James Rodger Fleming and Jason Thomas Fleming, Eds. (Boston: American Meteorological Society, 2007). This research-quality digital archive includes Guy Stewart Callendar’s manuscript letters, papers, journals, documents, and family photographs. For a catalog of AMS Books, see www.ametsoc.org/pubs/books. To order, call (617) 227-2426, extension 686, or email [email protected]. Library of Congress Cataloging-in-Publication Data Fleming, James Rodger. The Callendar effect : the life and times of Guy Stewart Callendar, the scientist who established the carbon dioxide theory of climate change / James Rodger Fleming. p.
    [Show full text]
  • An Iconography of American Hand Tools
    Tools Teach An Iconography of American Hand Tools Hand Tools in History Series Volume 6: Steel- and Toolmaking Strategies and Techniques before 1870 Volume 7: Art of the Edge Tool: The Ferrous Metallurgy of New England Shipsmiths and Toolmakers Volume 8: The Classic Period of American Toolmaking, 1827-1930 Volume 9: An Archaeology of Tools: The Tool Collections of the Davistown Museum Volume 10: Registry of Maine Toolmakers Volume 11: Handbook for Ironmongers: A Glossary of Ferrous Metallurgy Terms: A Voyage through the Labyrinth of Steel- and Toolmaking Strategies and Techniques 2000 BCE to 1950 Volume 13: Tools Teach: An Iconography of American Hand Tools Tools Teach An Iconography of American Hand Tools H. G. Brack Davistown Museum Publication Series Volume 13 © Davistown Museum 2013 ISBN 978-0-9829951-8-1 Copyright © 2013 by H. G. Brack ISBN 13: 978-0-9829951-8-1 ISBN 10: 0982995180 Davistown Museum First Edition; Second Printing Photography by Sett Balise Cover illustration by Sett Balise includes the following tools: Drawshave made by I. Pope, 913108T51 Dowel pointer, 22311T11 Inclinometer level made by Davis Level & Tool Co., 102501T1 Expansion bit patented by L. H. Gibbs, 090508T6 Socket chisel, 121805T6 Bedrock No. 2 smooth plane made by Stanley Tool Company, 100400T2 Molders’ hand tool, 102112T3 Caulking iron made by T. Laughlin Co. of Portland, ME, TCX1005 T-handle wood threading tap, 102212T2 Silversmiths’ hammer head made by Warner & Noble of Middletown, CT, 123012T3 Wire gauge made by Morse Twist Drill & Machine Co. of New Bedford MA, 10910T5 Surface gauge made by Veikko Arne Oby of Whitinsville, MA, 21201T12 No.
    [Show full text]
  • Tools & Accessories
    Tools & Accessories EZ-One Woodworking Center-EZT1000 The EZSMART EZ-One Woodworking Center can break down sheet goods like a panel saw, make repeat cuts like a table saw and cut to length like a miter saw. Our industrial grade track & patented bridge eliminates pushing material against the forces of a spinning blade, bit or knife. All cuts are made safely without tear-out or kick-back. Universal Edge Guide - EZUEGSB1 Turn almost any circular saw into a precision cutting system with the EZSMART Universal Edge Guide. Your circular saw mounted on our saw base takes your cutting experience to a whole new level of safety and precision, putting you in total control. Attach the EZSMART Universal Saw Base to the EZSMART Universal Edge Guide, set it to 24” wide, and you can cut down 4’ x 8’ panels, even in the vertical position, safely. Remove it from the EZSMART Universal Edge Guide, and it can be used on EZSMART Guide Rails. Telephone: Lightweight, compact and portable, there is no faster, safer way to make straight, repeatable 352-620 -2262 cuts. Toll Free: 1-877-681-7955 Clamping Bench System & Clamping Bench Top EZT300, EZT3001 From the size of the work surface, to the number of clamping points, the EZSMART clamping Bench is unrivaled and will enable you to easily handle all of your assembly, joining, routing, drilling, sanding and other woodworking projects. The EZSMART Clamping Bench Top provides 8 clamping points allowing you to position your work exactly where you want it! Multiform Master Table- EZT2000 & Table Top Kit- EZT2300 Compatible with all EZSMART extrusions and tools, you can transform from a tool stand to an extendable top in minutes simply by inserting the extrusions that hold the sacrificial wood.
    [Show full text]