DOCSLIB.ORG

Fluid Compatibility Chart

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fluid Compatibility Chart FLUID COMPATIBILITY CHART for porous components sealed with Loctite Impregnation Sealants LIQUIDS, SOLUTIONS & SUSPENSIONS Barium Chloride • Chrome Acid Cleaning • Ferrous Chloride • Ion Exchange Service • Nickel Chloride • LEGEND: Barium Hydroxide • Chrome Liquor • Ferrous Oxalate • Ion Exclusion Glycol • Nickel Cyanide • Barium Sulfate • Chrome Plating Bath • Ferrous Sulfate10% • Irish Moss Slurry • Nickel Fluoborate • Nickel Ore Fines Evaluate Loctite Battery Acid • Chromic Acid 10% • Ferrous Sulfate (Sat) • Iron Ore Taconite • • • Battery Diffuser Juice • Chromic Acid 50% (cold) Fertilizer Sol • Iron Oxide • Nickel Plating Bright • impregnation material Bauxite (See Alumina) • Chromic Acid 50% (hot) Flotation Concentrates • Isobutyl Alcohol • Nickel Sulfate • Bentonite • Chromium Acetate • Fluoride Salts • Isobutyraldehyde • Nicotinic Acid • Not Recommended Benzaldehyde • Chromium Chloride • Fluorine, Gaseous Isooctane • Nitrate Sol. • Benzene • Chromium Sulfate • or Liquid • Isopropyl Alcohol • Nitration Acid(s) Benzene Hexachloride • Classifier • Fluorolube • Isocyanate Resin • Nitric Acid Abrasive Coolant • Benzene in Hydrochloric Clay • Fluosilic Acid • Isopropyl Acetate • Nitric Acid10% • Acetaldehyde • Acid • Coal Slurry • Flux Soldering • Isopropyl Ether • Nitric Acid 20% • Acetate Solvents • Benzoic Acid • Coal Tar • Fly Ash Dry • Itaconic Acid • Nitric Acid Anhydrous Acetimide • Benzotriazole • Cobalt Chloride • Foam Latex Mix • Nitric Acid Fuming Acetic Acid Beryllium Sulfate • Copper Ammonium Foamite • Nitro Aryl Sulfonic Acid • • Jet Fuels Acetic Acid • Bicarbonate Liquor • Formate • Formaldehyde (cold) • • Nitrobenezene-Dry • Acetic Acid - glacial Bilge Lines • Copper Chloride • Formaldehyde (hot) • Jeweler's Rouge • Nitrocellulose • • Jig Table Slurry Acetic Anhydride • Bleach Liquor • Copper Cyanide • Formic Acid (Dil cold) • • Nitrofurane • Acetone • Bleached Pulps • Copper Liquor • Formic Acid (Dil hot) • Nitroguanidine • Acetyl Chloride Borax § Liquors • Copper Naphthenate • Formic Acid (cold) • Nitroparaffins-Dry • • Kaolin-China Clay § • Acetylene (Liquid Boric Acid • Copper Plating, Acid Formic Acid (hot) • Nitrosyl Chloride • Kelp Slurry • Phase) Brake Fluids • Process • Freon § • Norite Carbon • • Kerosene • Acid Clay Brine Chlorinated • Copper Plating, Alk. Fuel Oil • Nuchar • • Kerosene Chlorinated • Acrylic Acid Brine Cold • Process • Fuming Nitric Red • Ketone • Acrylonitrile Bromine Solution • Copper Sulfate • Fuming Sulfuric • Oakite § Compound Activated Alumina Butadiene • Core Oil • Fuming Oleum • • Lacquer Thinner • Oil, Creosote Activated Carbon Butyl Acetate • Corundum • Furfural • • • Lactic Acid • Oil, Emulsified Activated Silica Butyl Alcohol • Creosote • • • Lapping Compound • Oil, Fuel Alcohol-Allyl Butyl Amine • Creosote-Cresylic Acid • • • Latex-Natural • Oil, Lubricating Alcohol-Amyl Butyl Cellosolve § • Cyanide Solution • Gallic Acid • • • Latex-Synthetic • Oil, Soluble Alcohol-Benzyl Butyl Chloride • Cyanuric Chloride • Gallium Sulfate • • • Latex Synthetic Raw • Oleic Acid, hot Alcohol-Butyl Butyl Ether - Dry • Cyclohexane • Gasoline-Acid Wash • • • Laundry Wash Water • Oleic Acid, cold Alcohol-Ethyl Butyl Lactate • Cylinder Oils • Gasoline-Alk. Wash • • • Laundry Bleach • Ore Fines-Flotation Alcohol-Furfuryl Butyral Resin • Gasoline Aviation • • • Gasoline Copper Laundry Blue • Ore Pulp Alcohol-Hexyl • Butyraldehyde • • Detergents Chloride • Laundry Soda • Organic Dyes Alcohol-lsopropyl • Butyric Acid • • • Developer, photographic Gasoline Ethyl • Lead Arsenate • Oxalic Acid cold Alcohol-Methyl • • • Dextrin Gasoline Motor • Lead Oxide • Oxygen Alcohol-Propyl • • Diacetone Alcohol Gasoline Sour • Lead Sulfate • Ozone, wet Alum-Ammonium • Cadmium Chloride • • Diammonium Phosphate Gasoline White • Lignin Extract • Alum-Chrome • Cadmium Plating Bath • • Diamylamine Gluconic Acid • Lime Slaked • Alum-Potassium • Cadmium Sulfate • • Diatomaceaus Earth Glue-Animal Gelatin • Lime Sulfur Mix • Paint-Linseed Base Alum-Sodium • Calcium Acetate • • Slurry Glue-Plywood • Liquid Ion Exchange • Paint-Water Base Alumina • Calcium Bisulfate • • • Diazo Acetate Glutamic Acid • Lithium Chloride • Paint-Remover-Sol. Type Aluminum Acetate • Calcium Carbonate • • • Dibutyl Phthalate Glycerine Lye-Brine LOX (Liquid 02) Paint-Vehicles Aluminum Bicarbonate • Calcium Chlorate • • • Dichlorophenol Glycerol • Ludox • Palmitic Acid Aluminum Bifluoride • Calcium Chloride • • • Dichloro Ethyl Ether Glycine • Lye Paper Board Mill Waste Aluminum Chloride • Calcium Chloride Brine • • • Dicyandamide Glycine Hydrochloride • Paper Coating Slurry Aluminum Sulfate • Calcium Citrate • • • Calcium Ferrocyanide • Dielectric Fluid • Glycol Amine • Paper Pulp • Ammonia Anhydrous Machine Coating Color Calcium Formate • Diester Lubricants • Glycolic Acid • • Paper Pulp with Amun. • Ammonia Solutions Magnesite Slurry Calcium Hydroxide • Diethyl Ether Dry • Glyoxal • • Paper Pulp with Dye • Ammonium Bisulfite • Magnesite Calcium Lactate • Diethyl Sulfate • Gold Chloride • • Paper Pulp, bleached • Ammonium Borate • Magnesium Bisulfite Calcium Nitrate • Diethylamine • Gold Cyanide • • Paper Pulp, bleached- Ammonium Bromide • Magneslum Carbonate Calcium Phosphate • Diethylene Glycol • Granodine • • washed • Ammonium Carbonate • Magnesium Chloride Calcium Silicate • Diglycolic Acid Grape Pomace Graphite • • Paper Pulp Chlorinated • Ammonium Chloride • Magnesium Hydroxide Calcium Sulfamate • Dimethyl Formamide • Grease Lubricating • • Paper Groundwood • Ammonium Chromate • Magnesium Sulfate Calcium Sulfate • Dimethyl Sulfoxide • Green Soap • • Paper Rag • Ammonium Fluoride • Maleic Acid Calcium Sulfite • De-Ionized Water • Grinding Lubricant • • Paper Stocks, fine • Ammonium Fluorosilicate • Maleic Anhydride Camphor • De-Ionized Water Low Grit Steel • • Paradichlorobenezene • • Manganese Chloride Carbitol • Conductivity • Gritty Water • • Paraffin Molten • Ammonium Formate Manganese Sulfate Carbolic Acid (phenol) • Dioxane Dry • Groundwood Stock • • Paraffin Oil • Ammonium Hydroxide • Melamine Resin Carbon Bisulfide • Dioxidene • GRS Latex • • Paraformaldehyde • Ammonium Hyposulfite • Menthol Carbon Black • Dipentene - Pinene • Gum Paste • • Pectin Solution Acid • Ammonium Iodide • Mercaptans Carbon Tetrachloride • Diphenyl • Gum Turpentine • • Pentachlorethane • Ammonium Molybdate • Mercuric Chloride Carbonic Acid • Distilled Water (Industrial) • Gypsum • • PentaerythritoI Sol. • Ammonium Nitrate • Mercuric Nitrate Carbowax § • Dowtherm § • • Perchlorethylene (Dry) • Ammonium Oxalate • Mercury • Perchloric Acid Ammonium Persulfate Carboxymethyl Cellulose • Drying Oil • • • Halane Sol • Mercury Dry • Perchloromethyl Mercaptan Ammonium Phosphate Carnauba Wax • Dust-Flue (Dry) • • • Halogen Tin Plating • Methane • Permanganic Acid Ammonium Picrate Casein • Dye Liquors • • Halowax § • Methyl Alcohol • Persulfuric Acid Ammonium Sulfate Casein Water Paint • Harvel-Trans 0il • Methyl Acetate • Petroleum Ether Ammonium Sulfate Celite • • • Emery - Slurry • Heptane • Methyl Bromide • Petroleum Jelly Scrubber Cellosolve § • • • Emulsified Oils • Hexachlorobenzene • Methyl Carbitol • Phenol Formaldehyde Ammonium Sulfide Cellulose Pulp • • Enamel Frit Slip • Hexadiene • Methyl Cellosolve § • Resins Ammonium Thiocyanate Cellulose Xanthate • • • Esters General • Hexamethylene Methyl Chloride • Phenol Sulfonic Acid Amyl Acetate Cement Dry/Air Blown • • • Ethyl Acetate • Tetramine • Methyl Ethyl Ketone • Phenolic Glue Amyl Amine Cement Grout • • • Ethyl Alcohol • Hexane • Methyl Isobutyl Ketone • Phloroglucinol Amyl Chloride Cement Slurry • • • Ethyl Amine • Hydrazine • Methyl Lactate • Phosphate Ester Aniline Ceramic Enamel • • • Ethyl Bromide • Hydrazine Hydrate • Methyl Orange • Phosphatic Sand Aniline Dyes Ceric Oxide • • • Ethyl Cellosolve § • Hydrobromic Acid • Methylamine • Phosphoric Acid 85% hot Anodizing Bath Chalk • • Ethyl Cellosolve Slurry § • Hydrochloric Acid • Methylene Chloride • Phosphoric Acid 85% cold Antichlor Solution Chemical Pulp • • • Ethyl Formate • Hydrocyanic Acid • Mineral Spirits • Phosphoric Acid 50% hot Antimony Acid Salts Chestnut Tanning • • • Ethyl Silicate • Hydroflouric Acid Mixed Acid, Nitric/ Phosphoric Acid 50% cold Antimony Oxide China Clay • • • Ethylene Diamine • Hydrogen Peroxide (dil) • Sulfuric Phosphoric Acid 10% cold Antioxidant Gasoline Chloral Alcoholate • • Ethylene Dibromide • Hydrogen Peroxide (con) • Monochloracetic Acid • Phosphoric Acid 10% hot Aqua Regia Chloramine • • • Ethylene Dichloride • Hydroponic Sol • Morpholine • Phosphorous Molten Argon Chlorinated Hydrocarbons • • • Ethylene Glycol • Hydroquinone • Mud • Phosphotungstic Acid Armeen § Chlorinated Paperstock • • • Ethylenediamine Hydroxyacetic Acid • Photographic Sol. • Arochlor § • Chlorinated Solvents • Chlorinated Sulphuric Tetramine • Hypo • Phthalic Acid • Aromatic Gasoline • Nalco Sol. • Acids Hypochlorous Acid • Phytate • Aromatic Solvents • Naphtha • Chlorinated Wax Phytate Salts • Arsenic Acid • • Naphthalene • Chlorine Dioxide Fatty Acids • Pickling Acid, Sulfuric • Asbestos Slurry • Naval Stores Solvent • Chlorine Liquid Fatty Acids Amine • Ink • Picric Acid Solutions • Ash Slurry • Nematocide • Chlorine Dry Fatty Alcohol • Ink in Solvent-Printing • Pine Oil Finish • Asphalt Emulsions • Neoprene Emulsion • Chloroacetic Acid Ferric-Floc • Iodine in Alcohol • Asphalt Molten • Neoprene Latex • Chlorobenzene Dry • Ferric Chloride • Iodine-Potassium Iodide • Ferric Nitrate • • Nickel Acetate • • Chloroform Dry •
Load more

Recommended publications
  • How to Take Your Phosphate Binders
    How to take your phosphate binders Information for renal patients Oxford Kidney Unit Page 2 What are phosphate binders? To reduce the amount of phosphate you absorb from your food you may have been prescribed a medicine called a phosphate binder. Phosphate binders work by binding (attaching) to some of the phosphate in food. This will reduce the amount of phosphate being absorbed into your blood stream. A list of phosphate binders and how to take them is shown below. Phosphate binder How to take it Calcichew (calcium carbonate) Chew thoroughly 10-15 minutes before or immediately before food Renacet (calcium acetate) Phosex (calcium acetate) Osvaren (calcium acetate and magnesium carbonate) Swallow whole after the first Renagel 2-3 mouthfuls of food (sevelemer hydrochloride) Renvela tablets (sevelemer carbonate) Alucaps (aluminium hydroxide) Renvela powder Dissolve in 60ml of water and (sevelemer carbonate) take after the first 2-3 mouthfuls of food Fosrenol tablets Chew thoroughly towards the (lanthanum carbonate) end/immediately after each meal Fosrenol powder Mix with a small amount of (lanthanum carbonate) food and eat immediately Velphoro Chew thoroughly after the first (sucroferric oxyhydroxide) 2-3 mouthfuls The phosphate binder you have been prescribed is: ……………………………………………………………………………………………………………………………………………………….. Page 3 How many phosphate binders should I take? You should follow the dose that has been prescribed for you. Your renal dietitian can advise how best to match your phosphate binders to your meal pattern, as well as which snacks require a phosphate binder. What happens if I forget to take my phosphate binder? For best results, phosphate binders should be taken as instructed.
    [Show full text]
  • Calcium Acetate Capsules
    Calcium Acetate Capsules Type of Posting Revision Bulletin Posting Date 27–Dec–2019 Official Date 01–Jan–2020 Expert Committee Chemical Medicines Monographs 6 Reason for Revision Compliance In accordance with the Rules and Procedures of the 2015–2020 Council of Experts, the Chemical Medicines Monographs 6 Expert Committee has revised the Calcium Acetate Capsules monograph. The purpose for the revision is to add Dissolution Test 4 to accommodate FDA-approved drug products with different dissolution conditions and/or tolerances than the existing dissolution tests. • Dissolution Test 4 was validated using a YMC-Pack ODS-A C18 brand of L1 column. The typical retention time for calcium acetate is about 4.3 min. The Calcium Acetate Capsules Revision Bulletin supersedes the currently official monograph. Should you have any questions, please contact Michael Chang, Senior Scientific Liaison (301-230-3217 or [email protected]). C236679-M11403-CHM62015, rev. 00 20191227 Revision Bulletin Calcium 1 Official January 1, 2020 Calcium Acetate Capsules PERFORMANCE TESTS DEFINITION Change to read: Calcium Acetate Capsules contain NLT 90.0% and NMT · DISSOLUTION á711ñ 110.0% of the labeled amount of calcium acetate Test 1 (C4H6CaO4). Medium: Water; 900 mL IDENTIFICATION Apparatus 2: 50 rpm, with sinkers · A. The retention time of the calcium peak of the Sample Time: 10 min solution corresponds to that of the Standard solution, as Mobile phase, Standard solution, Chromatographic obtained in the Assay. system, and System suitability: Proceed as directed in · B. IDENTIFICATION TESTSÐGENERAL á191ñ, Chemical the Assay. Identification Tests, Acetate Sample solution: Pass a portion of the solution under test Sample solution: 67 mg/mL of calcium acetate from through a suitable filter of 0.45-µm pore size.
    [Show full text]
  • UNITED STATES PATENT OFFICE 2,629,746 PROCESS of PRODUCING PENTAERYTHRTOL Richard F
    Patented Feb. 24, 1953 r - 2,629,746 UNITED STATES PATENT OFFICE 2,629,746 PROCESS OF PRODUCING PENTAERYTHRTOL Richard F. B. Cox, Wilmington, Del, assignor to Hercules Powder Company, Wilmington, Del, a corporation of Delaware No Drawing. Application June 12, 1948, Serial No. 32,737 i Caim. (C. 260-635) 2 ihis application is a continuation-in-part of The process to which this invention relates my copending application Serial Number 459,709, may broadly be described as involving condensa filed September 25, 1942, and now abandoned. tion of acetaldehyde with formaldehyde in an This invention relates to an improved process aqueous medium in the presence of an alkaline for the preparation of pentaerythritol. More catalyst to form a reaction mixture comprising particularly, it is concerned with an improved pentaerythritol and the formate of the catalyst process for recovering pentaerythritol from a cation, Converting said reaction mixture to an Crude reaction mixture obtained by the alkaline aqueous Solution comprising pentaerythritol and Condensation of acetaldehyde and formaldehyde. free formic acid by addition of a substance yield Pentaerythritol is prepared commercially by O ing hydrogen ions in an amount at least chemi condensation of acetaldehyde with formaldehyde cally equivalent to the formate present, extract in an aqueous medium in the presence of an ing formic acid from Said solution with a formic alkaline catalyst such as Ca (CH)2, NaOH, etc. acid solvent substantially water-immiscible and in the resulting reaction mixture there is pres nonsolvent for the pentaerythritol, applying heat ent in addition to the pentaerythritol a metal 15 to evaporate said extracted solution at least to Salt of formic acid, the particular salt depend a point at which Crystallization takes place, and ing upon the catalyst enployed.
    [Show full text]
  • Production and Testing of Calcium Magnesium Acetate in Maine
    77 Majesty's Stationery Office, London, England, River. Res. Note FPL-0229. Forest Service, U.S. 1948. Department of Agriculture, Madison, Wis., 1974. 14. M.S. Aggour and A. Ragab. Safety and Soundness 20. W.L. James. Effect of Temperature and Moisture of Submerged Timber Bridge PU.ing. FHWA/MD In­ Content on Internal Friction and Speed of Sound terim Report AW082-231-046. FHWA, U.S. Depart­ in Douglas Fir. Forest Product Journal, Vol. ment of Transportation, June 1982. 11, No. 9, 1961, pp. 383-390, 15. B.O. Orogbemi. Equipment for Determining the 21. A, Burmester. Relationship Between Sound Veloc­ Dynami c Modulus of Submerged Bridge Timber Pil­ ity and Morphological, Physical, and Mechani­ ·ing. Master's thesis. University of Maryland, cal Properties of Wood. Holz als Roh und Wer­ College Park, 1980. stoff, Vol. 23, No. 6, 1965, pp. 227-236 (in 16. T.L. Wilkinson. Strength Evaluation of Round German) • Timber Piles. Res. Note FPL-101. Forest Ser­ 22. c.c. Gerhards. Stress Wave Speed and MOE of vice, U.S. Department of Agriculture, Madison, Weetgum Ranging from 150 to 15 Percent MC. Wis., 1968. Forest Product Journal, Vol. 25, No. 4, 1975, 17. J, Bodig and B.A. Jayne. Mechanics of Wood and pp. 51-57. Wood Composites. Van Nostrand, New York, 1982. 18. R.M. Armstrong. Structural Properties of Timber Piles, Behavior of Deep Foundations. Report STP-670, ASTM, Philadelphia, 1979, pp. 118-152. 19. B.A, Bendtsen. Bending Strength and Stiffness Publication of this paper sponsored by Committee on of Bridge Piles After 85 Years in the Milwaukee Structures Maintenance.
    [Show full text]
  • Phosphate Binders
    Pharmacy Info Sheet Phosphate Binders calcium acetate, calcium carbonate (Tums, Calsan, Apocal, Ocal), calcium liquid, aluminum hydroxide (Basaljel, Amphojel), sevelamer (Renagel), lanthanum (Fosrenol) What it does: Phosphate binders are used to treat high Special considerations for lanthamum and blood phosphorus levels. sevelamer: Calcium acetate, calcium carbonate, calcium Lanthanum should be taken during or liquid, aluminum hydroxide, lanthanum and immediately after a meal. Taking a dose on an sevelamer bind dietary phosphate. When the empty stomach can cause nausea and kidneys fail, phosphorus builds up in the body vomiting. Chew the tablet completely before because the kidneys can no longer remove swallowing. DO NOT swallow tablets whole. much phosphorus. Phosphate binders are used to lower the amount of phosphorus Sevelamer should be taken just before eating. absorbed from food to limit development of Swallow the tablet whole – Renagel should not bone and blood vessel disease. be cut or chewed. The contents of sevelamer tablets expand in water and could cause Aluminum hydroxide and calcium carbonate choking if cut chewed or crushed. may also be prescribed as antacids. Calcium preparations may also be prescribed as Phosphate binders may interfere with the calcium supplements. Use them only as absorption of certain drugs such as iron prescribed. When these medications are supplements, antibiotics, digoxin, ranitidine, prescribed as calcium supplements or antiseizure, and antiarrhythmic medications. antacids, take between meals. If you are prescribed any of these drugs, take them at least 1 hour before or 3 hours after your How it works: phosphate binder. Kidney disease can cause phosphate to accumulate which results in bone and blood What to do if you miss a dose: vessel disease.
    [Show full text]
  • Chemistry of Natural Resources *OCE/26193* Candidates Answer on the Question Paper
    ADVANCED SUBSIDIARY GCE CHEMISTRY B (SALTERS) F332/TEST Chemistry of Natural Resources *OCE/26193* Candidates answer on the question paper. Friday 27 May 2011 Afternoon OCR supplied materials: • Data Sheet for Chemistry B (Salters) (inserted) Duration: 1 hour 45 minutes • Advance Notice: ‘Polymers on the move’ (inserted) Other materials required: • Scientific Calculator *F332TEST* INSTRUCTIONS TO CANDIDATES • The insert will be found in the centre of this document. • Write your name, centre number and candidate number in the boxes above. Please write clearly and in capital letters. • Use black ink. Pencil may be used for graphs and diagrams only. • Read each question carefully. Make sure you know what you have to do before starting your answer. • Write your answer to each question in the space provided. If additional space is required, you should use the lined pages at the end of this booklet. The question number(s) must be clearly shown. • Answer all the questions. • Do not write in the bar codes. INFORMATION FOR CANDIDATES • The number of marks is given in brackets [ ] at the end of each question or part question. • Where you see this icon you will be awarded marks for the quality of written communication in your answer. This means for example you should: • ensure that text is legible and that spelling, punctuation and grammar are accurate so that meaning is clear; • organise information clearly and coherently, using specialist vocabulary when appropriate. • You may use a scientific calculator. • The insert ‘Polymers on the move’ is provided for use with question 5. • A copy of the Data Sheet for Chemistry B (Salters) is provided as an insert with this question paper.
    [Show full text]
  • Kinetics of the Process of Conversion of Production Of
    European Journal of Molecular & Clinical Medicine ISSN 2515-8260 Volume 07, Issue 07, 2020 Kinetics Of The Process Of Conversion Of Production Of Calcium Chlorate With The Use Of A Filtrate Of Hydrocaldic Acid Decomposition Of Washed Ck Phosphonic Concentrate Khamdamova Shohida Sherzodovna1, Rozikova Dilshoda Abdullajanovna2 1Doctor of Technical Sciences Associate Professor of the Department of Chemical Technology, Fergana Polytechnic Institute, Fergana Uzbekistan 2Basic doctoral student of the Namangan Engineering and Technological Institute, Namangan, Uzbekistan Abstract: The process of conversion of 20-25% solutions of calcium chloride obtained by decomposition of phosphorites of Central Kizikumes with sodium chlorate at 50, 75, 100 and 125 ° C with evaporation and without evaporation of conversion solutions has been studied. The process activation energies, the order and the rate constant of the conversion reaction as well as kinetic values of the reagent consumption are determined depending on temperature, time and carrying conditions of processes. The order of the conversion process of calcium chloride with sodium chlorate equals one. It is confirmed by the fact that the conversion rate constant calculated on the basis of experimental data remains practically constant for each temperature. Also, the linear dependence of lg (C0-Cτ) on τ also indicates the first order of the conversion process of calcium chloride with sodium chlorate. The rate constant of conversion increases with a rise in temperature. Its dependence on temperature obeys Arrhenius law. To establish values of the conversion rate constant for different temperatures, the constants (К0) for 20 and 25% solutions of calcium chloride have been calculated by Arrhenius equation and the dependence equation of lg K on 1 / T has been derived.
    [Show full text]
  • FLUID COMPATIBILITY CHART for Metal Threaded Fittings Sealed with Loctite¨ Sealants LIQUIDS, SOLUTIONS & SUSPENSIONS
    FLUID COMPATIBILITY CHART for metal threaded fittings sealed with Loctite® Sealants LIQUIDS, SOLUTIONS & SUSPENSIONS LEGEND: Bagasse Fibers.......................... Chlorobenzene Dry ................... Ferrous Chloride ...................... Ion Exclusion Glycol ................. Nickel Chloride.......................... All Loctite® Anaerobic Sealants are Barium Acetate ........................ Chloroform Dry......................... Ferrous Oxalate......................... Irish Moss Slurry...................... Nickel Cyanide ......................... Compatible Including #242®, 243, Barium Carbonate..................... Chloroformate Methyl............... Ferrous Sulfate10%.................. Iron Ore Taconite ..................... Nickel Fluoborate ..................... 542, 545, 565, 567, 569, 571, 572, Barium Chloride........................ Chlorosulfonic Acid .................. Ferrous Sulfate (Sat)................. Iron Oxide ................................ Nickel Ore Fines ....................... 577, 580, 592 Barium Hydroxide..................... Chrome Acid Cleaning .............. Fertilizer Sol ............................. Isobutyl Alcohol ....................... Nickel Plating Bright ................. † Use Loctite® #270, 271™, 277, 554 Barium Sulfate.......................... Chrome Liquor.......................... Flotation Concentrates.............. Isobutyraldehyde ..................... Nickel Sulfate ........................... Not Recommended Battery Acid .............................. Chrome Plating
    [Show full text]
  • Production of Low-Cost Acetate Deicers from Biomass and Industrial Wastes
    Production of Low-Cost Acetate Deicers from Biomass and Industrial Wastes Shang-Tian Yang and Zuwei Jin, The Ohio State University Brian H. ChoUar, Federal Highway Administration Calcium magnesium acetate (CMA), a mixture of calcium 1 rom 10 million to 14 million tons of road salt are acetate and magnesium acetate, is used as an environmen• I used annually in the United States and Canada. tally benign roadway deicer. The present commercial F Salt is an extremely effective snow and ice con• CMA deicer made from glacial acetic acid and dolomitic trol agent and is relatively inexpensive. However, a lime or limestone is more expensive than salt and other study in New York State showed that although 1 ton of deicers. Also, a liquid potassium acetate deicer is used to road salt cost only $25, it caused more than $1,400 in replace urea and glycol in airport runway deicing. Two al• damage (1). Salt is corrosive to concrete and metals ternative low-cost methods to produce these acetate de- used in the nation's infrastructure, is harmful to road• icers from cheap feedstocks, such as biomass and side vegetation, and poses serious threats to environ• industrial wastes, were studied. CMA deicers produced ment and ground-water quality in some regions (2). from cheese whey by fermentation and extraction were FHWA spends about $12.5 billion annually, a sub• tested for their acetate content and deicing property. The stantial portion of which is used to rebuild and resur• CMA solid sample obtained from extraction of the acetic face highways and bridges damaged by salt corrosion.
    [Show full text]
  • BLUE BOOK 1 Methyl Acetate CIR EXPERT PANEL MEETING
    BLUE BOOK 1 Methyl Acetate CIR EXPERT PANEL MEETING AUGUST 30-31, 2010 Memorandum To: CIR Expert Panel Members and Liaisons From: Bart Heldreth Ph.D., Chemist Date: July 30, 2010 Subject: Draft Final Report of Methyl Acetate, Simple Alkyl Acetate Esters, Acetic Acid and its Salts as used in Cosmetics . This review includes Methyl Acetate and the following acetate esters, relevant metabolites and acetate salts: Propyl Acetate, Isopropyl Acetate, t-Butyl Acetate, Isobutyl Acetate, Butoxyethyl Acetate, Nonyl Acetate, Myristyl Acetate, Cetyl Acetate, Stearyl Acetate, Isostearyl Acetate, Acetic Acid, Sodium Acetate, Potassium Acetate, Magnesium Acetate, Calcium Acetate, Zinc Acetate, Propyl Alcohol, and Isopropyl Alcohol. At the June 2010 meeting, the Panel reviewed information submitted in response to an insufficient data announcement for HRIPT data for Cetyl Acetate at the highest concentration of use (lipstick). On reviewing the data in the report, evaluating the newly available unpublished studies and assessing the newly added ingredients, the Panel determined that the data are now sufficient, and issued a Tentative Report, with a safe as used conclusion. Included in this report are Research Institute for Fragrance Materials (RIFM) sponsored toxicity studies on Methyl Acetate and Propyl Acetate, which were provided in “wave 2” at the June Panel Meeting but are now incorporated in full. The Tentative Report was issued for a 60 day comment period (60 days as of the August panel meeting start date). The Panel should now review the Draft Final Report, confirm the conclusion of safe, and issue a Final Report. All of the materials are in the Panel book as well as in the URL for this meeting's web page http://www.cir- safety.org/aug10.shtml.
    [Show full text]
  • Butyraldehyde Casrn: 123-72-8 Unii: H21352682a
    BUTYRALDEHYDE CASRN: 123-72-8 UNII: H21352682A FULL RECORD DISPLAY Displays all fields in the record. For other data, click on the Table of Contents Human Health Effects: Human Toxicity Excerpts: /HUMAN EXPOSURE STUDIES/ Three Asian subjects who reported experiencing severe facial flushing in response to ethanol ingestion were subjects of patch testing to aliphatic alcohols and aldehydes. An aqueous suspension of 75% (v/v) of each alcohol and aldehyde was prepared and 25 uL was used to saturate ashless grade filter paper squares which were then placed on the forearm of each subject. Patches were covered with Parafilm and left in place for 5 minutes when the patches were removed and the area gently blotted. Sites showing erythema during the next 60 minutes were considered positive. All three subjects displayed positive responses to ethyl, propyl, butyl, and pentyl alcohols. Intense positive reactions, with variable amounts of edema, were observed for all the aldehydes tested (valeraldehyde as well as acetaldehyde, propionaldehyde, and butyraldehyde). [United Nations Environment Programme: Screening Information Data Sheets on n-Valeraldehyde (110-62-3) (October 2005) Available from, as of January 15, 2009: http://www.chem.unep.ch/irptc/sids/OECDSIDS/sidspub.html] **PEER REVIEWED** [United Nations Environment Programme: Screening Information Data Sheets on n­Valeraldehyde (110­62­3) (October 2005) Available from, as of January 15, 2009: http://www.chem.unep.ch/irptc/sids/OECDSIDS/sidspub.html] **PEER REVIEWED** /SIGNS AND SYMPTOMS/ May act as irritant, /SRP: CNS depressant/ ...[Budavari, S. (ed.). The Merck Index - Encyclopedia of Chemicals, Drugs and Biologicals. Rahway, NJ: Merck and Co., Inc., 1989., p.
    [Show full text]
  • Six-Year Review 3 Technical Support Document for Chlorate
    Six-Year Review 3 Technical Support Document for Chlorate Office of Water (4607M) EPA-810-R-16-013 December 2016 Disclaimer This document is not a regulation. It is not legally enforceable, and does not confer legal rights or impose legal obligations on any party, including EPA, states, or the regulated community. While EPA has made every effort to ensure the accuracy of any references to statutory or regulatory requirements, the obligations of the interested stakeholders are determined by statutes, regulations or other legally binding requirements, not this document. In the event of a conflict between the information in this document and any statute or regulation, this document would not be controlling. This page intentionally left blank. Table of Contents 1 Introduction ................................................................................................................. 1-1 2 Contaminant Background .......................................................................................... 2-1 2.1 Chemical and Physical Properties ................................................................................. 2-1 2.2 Production, Use and Release ......................................................................................... 2-2 2.2.1 Commercial Production and Use in Industry and Agriculture ........................... 2-2 2.2.2 Incidental Production and Release ...................................................................... 2-6 2.3 Environmental Fate ......................................................................................................
    [Show full text]