DOCSLIB.ORG

Standardiseringsprosjekter Og Nye Standarder

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Standardiseringsprosjekter Og Nye Standarder Annonseringsdato: 2017-09-27 Listenummer: 18/2017 Standardiseringsprosjekter og nye standarder Listenummer: 18/2017 Side: 1 av 139 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) prEN 1748-2-1 Glass in Building - Special basic products - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties Språk: en Kommentarfrist: 2017.11.02 prEN 13279-1 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements Språk: en Kommentarfrist: 2017.11.02 prEN 13454-1 Binders and factory made mixtures for floor screeds based on calcium sulphate - Part 1: Definitions and requirements Språk: en Kommentarfrist: 2017.10.12 prEN 17161 Design for All - Accessibility following a Design for All approach in products, goods and services - Extending the range of users Språk: en Kommentarfrist: 2017.11.02 prEN ISO 4007 Personal protective equipment - Eye and face protection - Vocabulary (ISO/DIS 4007:2017) Språk: en Kommentarfrist: 2017.10.27 prEN ISO 8384 Ships and marine technology - Dredgers - Vocabulary (ISO/DIS 8384:2017) Språk: en Kommentarfrist: 2017.11.15 prEN ISO 11139 Sterilization of health care products - Vocabulary - Terms used in sterilization and related equipment and process standards (ISO/DIS 11139:2017) Språk: en Kommentarfrist: 2017.11.02 prEN ISO 80000-3 Quantities and units - Part 3: Space and time (ISO/DIS 80000-3:2017) Språk: en Kommentarfrist: 2017.09.29 prEN ISO 80000-8 Quantities and units - Part 8: Acoustics (ISO/DIS 80000-8:2017) Språk: en Kommentarfrist: 2017.09.29 Standardforslag til høring - internasjonale (ISO) ISO/DIS 8384 Ships and marine technology - Dredgers - Vocabulary Språk: en Kommentarfrist: 2017.11.14 Listenummer: 18/2017 Side: 2 av 139 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 8384 Ships and marine technology -- Dredgers -- Vocabulary Språk: en Kommentarfrist: 2018.01.20 ISO/DIS 11139 Sterilization of health care products -- Vocabulary -- Terms used in sterilization and related equipment and process standards Språk: en Kommentarfrist: 2017.11.01 ISO/DIS 14617 Graphical symbols for diagrams Språk: en Kommentarfrist: 2017.11.22 ISO/DIS 80000-3 Quantities and units -- Part 3: Space and time Språk: en Kommentarfrist: 2017.09.28 ISO/DIS 80000-3 Quantities and units -- Part 3: Space and time Språk: en Kommentarfrist: 2017.12.04 ISO/DIS 80000-8 Størrelser og enheter - Del 8: Akustikk Quantities and units -- Part 8: Acoustics Språk: en Kommentarfrist: 2017.09.28 ISO/DIS 80000-8 Quantities and units -- Part 8: Acoustics Språk: en Kommentarfrist: 2017.12.04 ISO-standarder ISO 2575:2010/Amd 7:2017 Språk: en ISO 2575:2010/Amd 6:2017 Språk: en ISO 7131:2009/Amd 1:2017 Språk: en ISO 8000-2:2017 Data quality -- Part 2: Vocabulary Språk: en Erstatter A00008:20:057436 ISO 9849:2017 Optics and optical instruments -- Geodetic and surveying instruments -- Vocabulary Språk: en Erstatter A00008:20:028063 Listenummer: 18/2017 Side: 3 av 139 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 10110-7:2017 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 7: Surface imperfections Språk: en Erstatter A00008:20:042012 ISO 18369-1:2017 Ophthalmic optics -- Contact lenses -- Part 1: Vocabulary, classification system and recommendations for labelling specifications Språk: en Erstatter A00008:20:033429,A00008:20:046070 ISO/TR 19814:2017 Information and documentation -- Collections management for archives and libraries Språk: en ISO/TS 20477:2017 Nanotechnologies -- Standard terms and their definition for cellulose nanomaterial Språk: en ISO/TS 80004-13:2017 Nanotechnologies -- Vocabulary -- Part 13: Graphene and related two-dimensional (2D) materials Språk: en Rapporter fra CEN (CR) CEN ISO/TS 80004-1:2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015) Språk: en CEN ISO/TS 80004-2:2017 Nanotechnologies - Vocabulary - Part 2: Nano-objects (ISO/TS 80004-2:2015) Språk: en CEN ISO/TS 80004-12:2017 Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology (ISO/TS 80004-12:2016) Språk: en CEN/TS 15398:2016 Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element Språk: en CEN/TS 16981:2016 Photocatalysis - Glossary of terms Språk: en Fastsatte norske standarder NS-EN ISO 7010:2012/A7:2017 Endringsblad A7 - Grafiske symboler - Sikkerhetsfarger og sikkerhetsskilter - Registrerte sikkerhetsskilter (ISO 7010:2011/Amd 7:2016) Amendment A7 - Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2011/Amd 7:2016) Språk: en Listenummer: 18/2017 Side: 4 av 139 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - nasjonale prNS 415-1 Driftsinspektører - Del 1: Regler for eksaminering og sertifisering In-service inspectors - Part 1: Rules for examination and certification Språk: no Kommentarfrist: 2017.11.01 prNS 415-2 Driftsinspektører - Del 2: Fagplaner for olje og gass (offshore, petrokjemi, raffinerier) In-service inspectors - Part 2: Syllabus for oil and gas (offshore, petrochemical, refineries) Språk: no Kommentarfrist: 2017.11.01 prNS 11034 Universell utforming - Tjenester - Tilgjengelighet til finanstjenester Universal design - Services - Accessibility to financial services Språk: no Kommentarfrist: 2017.09.29 prNS 11035 Universell utforming - Tjenester - Likeverdig tilgang til tjenester innen detaljhandel Universal design - Services - Equal access to retail trade services Språk: no Kommentarfrist: 2017.09.29 prNS-INSTA 800 Rengjøringskvalitet - System for å fastsette og bedømme rengjøringskvalitet Cleaning quality - System for establishing and assessing cleaning quality Språk: en Kommentarfrist: 2017.10.15 Standardforslag til høring - europeiske (CEN) EN ISO 17264:2009/prA Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces - Amendment 1 (ISO 17264:2009/DAmd 1:2017) Språk: en Kommentarfrist: 2017.10.26 EN ISO 17264:2009/prA1 Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces - Amendment 1 (ISO 17264:2009/DAmd 1:2017) Språk: en Kommentarfrist: 2017.10.26 prEN 12973 Value Management Språk: en Kommentarfrist: 2017.10.26 prEN ISO 14906 Electronic fee collection - Application interface definition for dedicated short-range communication (ISO/DIS 14906:2017) Språk: en Kommentarfrist: 2017.11.07 Listenummer: 18/2017 Side: 5 av 139 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport prEN ISO 19011 Guidelines for auditing management systems (ISO/DIS 19011:2017) Språk: en Kommentarfrist: 2017.10.19 Standardforslag til høring - internasjonale (ISO) ISO 14816:2005/DAmd 1 Språk: en Kommentarfrist: 2017.10.25 ISO 17262:2012/DAmd 1 Språk: en Kommentarfrist: 2017.10.25 ISO 17264:2009/DAmd 1 Språk: en Kommentarfrist: 2017.10.25 ISO 24534-4:2010/DAmd 1 Språk: en Kommentarfrist: 2017.10.25 ISO 24534-5:2011/DAmd 1 Språk: en Kommentarfrist: 2017.10.25 ISO/DIS 9004 Quality management -- Quality of an organization -- Guidance to achieve sustained success Språk: en Kommentarfrist: 2017.10.07 ISO/DIS 10001 Quality management -- Customer satisfaction -- Guidelines for codes of conduct for organizations Språk: en Kommentarfrist: 2017.10.23 ISO/DIS 10003 Quality management -- Customer satisfaction -- Guidelines for dispute resolution external to organizations Språk: en Kommentarfrist: 2017.10.23 ISO/DIS 10004 Quality management -- Customer satisfaction -- Guidelines for monitoring and measuring Språk: en Kommentarfrist: 2017.10.23 ISO/DIS 10005 Quality management systems -- Guidelines for quality plans Språk: en Kommentarfrist: 2017.10.12 ISO/DIS 14813-5 Transport information and control systems -- Reference model architecture(s) for the TICS sector -- Part 5: Requirements for architecture description in TICS standards Språk: en Kommentarfrist: 2017.11.05 Listenummer: 18/2017 Side: 6 av 139 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 14813-5 Intelligent transport systems -- Reference model architecture(s) for the ITS sector -- Part 5: Requirements for architecture description in ITS standards Språk: en Kommentarfrist: 2018.01.11 ISO/DIS 14827-3.2 Transport Information and control systems -- Data interfaces between centres for transport information and control systems -- Part 3: Data interfaces between centres for intelligent transport sytems (ITS) using XML Språk: en Kommentarfrist: 2017.09.28 ISO/DIS 14906 Road transport and traffic telematics -- Electronic fee collection -- Application interface definition for dedicated short-range communication Språk: en Kommentarfrist: 2017.11.06 ISO/DIS 14906 Electronic fee collection -- Application interface definition for dedicated short-range communication Språk: en Kommentarfrist: 2018.01.12 ISO/DIS 15622 Intelligent transport systems -- Adaptive cruise control systems -- Performance requirements and test procedures Språk: en Kommentarfrist: 2018.01.11 ISO/DIS 15638-21 Intelligent transport systems -- Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) -- Part 21: Monitoring of regulated vehicles using roadside sensors
Load more

Recommended publications
  • Věstníku ÚNMZ Č. 12/2017
    Ročník 2017 Úřadu pro technickou normalizaci, metrologii a státní zkušebnictví ČÍSLO 12 Zveřejněno dne 8. prosince 2017 OBSAH: ČÁST A – OZNÁMENÍ Strana: Oddíl 1. Harmonizované normy a určené normy ÚNMZ č. 115/17 o určených normách 2 ÚNMZ č. 116/17 o určených normách k nařízení vlády č. 120/2016 Sb. 3 Oddíl 2. České technické normy ÚNMZ č. 117/17 o vydání ČSN, jejich změn, oprav a zrušení 60 ÚNMZ č. 118/17 o schválení evropských norem k přímému používání jako ČSN 72 ÚNMZ č. 119/17 o zahájení zpracování návrhů českých technických norem 81 ÚNMZ č. 120/17 o veřejném projednání návrhů evropských norem CEN 110 ÚNMZ č. 121/17 o veřejném projednání návrhů evropských norem CENELEC 115 ÚNMZ č. 122/17 o veřejném projednání návrhů evropských telekomunikačních norem 117 Oddíl 3. Metrologie Oddíl 4. Autorizace Oddíl 5. Akreditace ČIA, č. 12/17 o udělení, pozastavení a zrušení akreditaci 119 Oddíl 6. Ostatní oznámení MO ČR č. 12/17 o vydání seznamu nových standardizačních dohod NATO, vydání doplňků ke standardizačním dohodám, o zrušení standardizačních dohod a přistoupení ke standardizačním dohodám 131 ČÁST B – INFORMACE ÚNMZ č. 12/17 Informačního střediska WTO o notifikacích Členů Dohody o technických překážkách obchodu (TBT), která je nedílnou součástí Dohody o zřízení Světové obchodní organizace (WTO) 138 ČÁST C – SDĚLENÍ ÚNMZ o ukončení platnosti norem 143 ČAS, p.o. ceník zboží a služeb poskytovaných Českou agenturou pro standardizaci, p. o. 144 Věstník č. 12/2017 ČÁST A – OZNÁMENÍ Oddíl 1. Harmonizované normy a určené normy OZNÁMENÍ č. 115/17 Úřadu pro technickou normalizaci, metrologii a státní zkušebnictví o určených normách Úřad pro technickou normalizaci, metrologii a státní zkušebnictví oznamuje podle § 4a odst.
    [Show full text]
  • 국제표준 진행현황 September 25, 2017 / Vol.215
    국제표준 진행현황 September 25, 2017 / Vol.215 ISO에서는 매월 국제표준 현황표를 제공합니다. 이번 제 210호에서는 2017년 9월 현재 ISO 기술위원회에서 진행 중인 FDIS (최종국제표준안) 및 SP (발간표준) 현황표를 게재합니다. 원문은 (https://www.iso.org/iso- update.html)를 참고하여 주시기 바랍니다. FDIS(최종국제표준안) 2017년 8월 31일자 투표 마감일 Rolling bearings TC 4 구름 베어링 Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings ISO/FDIS 20056-2 2017-10-10 구름 베어링 - 세라믹으로 만든 전동체가 있는 하이브리드 베어링에 대한 정 격 하중 - 제2부: 정정격하중 Paper, board and pulps TC 6 종이, 판지 및 펄프 Paper, board and pulps - General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 ISO/FDIS 4094 (Revision of ISO 4094:2005) 2017-10-21 (ISO 4094:2005 개정) 종이, 판지 및 펄프 - 레벨 3의 광학기준교환표준 문제에 승인된 실험실 역량 의 일반 요구사항 Ships and marine technology TC 8 선박 및 해양기술 Ships and marine technology - Servicing of inflatable life-saving ISO/FDIS 18079-1 appliances - Part 1: General 2017-10-24 선박 및 해양기술 - 팽창식 구명 장비의 정비 - 제1부: 일반 Ships and marine technology - Servicing of inflatable life-saving ISO/FDIS 18079-2 appliances - Part 2: Inflatable life rafts 2017-10-24 선박 및 해양기술 - 팽창식 구명 장비의 정비 - 제2부: 팽창식 구명뗏목 Ships and marine technology - Servicing of inflatable life-saving ISO/FDIS 18079-3 appliances - Part 3: Inflatable lifejackets 2017-10-24 선박 및 해양기술 - 팽창식 구명 장비의 정비 - 제3부: 팽창식 구명조끼 Ships and marine technology - Servicing of inflatable life-saving ISO/FDIS 18079-4 appliances - Part 4: Marine evacuation systems 2017-10-24 선박 및 해양기술 - 팽창식 구명 장비의 정비 - 제4부: 해양 피난 시스템 Ships and marine
    [Show full text]
  • 2011-11 (Adobe Reader)
    Turinys STANDARTIZACIJA .......................................................................................... 5 IÐLEISTI LIETUVOS STANDARTAi IR KITI LEIDINIAI ............................................ 5 NETEKÆ GALIOS LIETUVOS STANDARTAI IR KITI LEIDINIAI ............................. 15 NETEKSIANTIS GALIOS LIETUVOS STANDARTAS ............................................ 19 TARPTAUTINIØ IR EUROPOS ÁSTAIGØ BEI ORGANIZACIJØ STANDARTAI IR KITI LEIDINIAI, KURIUOS DEPARTAMENTAS GAVO SPALIO MËN. .............. 20 TARPTAUTINËS STANDARTIZACIJOS ORGANIZACIJOS STANDARTAI IR KITI LEIDINIAI .................. 20 TARPTAUTINËS ELEKTROTECHNIKOS KOMISIJOS STANDARTAI IR KITI LEIDINIAI ...................... 24 RATIFIKUOTI EUROPOS STANDARTIZACIJOS KOMITETO STANDARTAI IR KITI LEIDINIAI ............... 25 RATIFIKUOTI EUROPOS ELEKTROTECHNIKOS STANDARTIZACIJOS KOMITETO STANDARTAI IR KITI LEIDINIAI .................................................................................................. 28 RATIFIKUOTI EUROPOS TELEKOMUNIKACIJØ STANDARTØ INSTITUTO STANDARTAI IR KITI LEIDINIAI .. 30 REDAKCINË KOLEGIJA Redagavo A. Treèiokaitë Maketavo B. Meðkënienë 2011-11-11 © Lietuvos standartizacijos departamentas, 2011 Lietuvos standartizacijos departamento BIULETENIS 2011 Nr. 11 VILNIUS, 2011 Lietuvos standartizacijos departamentas T. Kosciuðkos g. 30 LT-01100 Vilnius Telefonas: (8~5) 270 9360 El. paðtas: [email protected] Interneto tinklalapis: http://www.lsd.lt LIETUVOS STANDARTIZACIJOS DEPARTAMENTO BIULETENIS 2011 Nr. 11 STANDARTIZACIJA IÐLEISTI LIETUVOS STANDARTAI
    [Show full text]
  • Standards Action Layout SAV3825
    PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 38, #25 June 22, 2007 Contents American National Standards Call for Comment on Standards Proposals................................................. 2 Call for Comment Contact Information........................................................ 5 Initiation of Canvasses.................................................................................. 7 Final Actions .................................................................................................. 8 Project Initiation Notification System (PINS) .............................................. 9 International Standards ISO Draft Standards....................................................................................... 12 ISO and IEC Newly Published Standards .................................................... 13 Proposed Foreign Government Regulations ................................................ 16 Information Concerning.................................................................................. 17 American National Standards Call for comment on proposals listed This section solicits public comments on proposed draft new American National Standards, including the national adoption of Ordering Instructions for "Call-for-Comment" Listings ISO and IEC standards as American National Standards, and on 1. Order from the organization indicated for the specific proposals to revise, reaffirm or withdraw approval of existing proposal. American National Standards. A draft
    [Show full text]
  • International Standards in Process CD Registered
    International Standards in process TC 41 Pulleys and belts (including veebelts) An International Standard is the result of an agreement between the ISO/CD 7590 Steel cord conveyor belts — Methods for the member bodies of ISO. A first important step towards an International determination of total thickness and cover Standard takes the form of a committee draft (CD) - this is circulated thickness for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to TC 43 Acoustics the Central Secretariat for processing as a draft International Stand- ISO/CD 7779 Acoustics — Measurement of airborne noise ard (DIS). The DIS requires approval by at least 75 % of the member emitted by information technology and tel- bodies casting a vote. A confirmation vote is subsequently carried ecommunications equipment out on a final draft International Standard (FDIS), the approval criteria TC 45 Rubber and rubber products remaining the same. ISO/CD 2921 Rubber, vulcanized — Determination of low- temperature retraction (TR test) TC 61 Plastics ISO/CD 21475 Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation TC 79 Light metals and their alloys CD registered ISO/DTS Guideline for the selection of coating types, 16688 tests and methods of assessing the perfor- mance of coated aluminium in architectural Period from 01 April to 30 April 2017 applications These documents are currently under consideration in the technical TC 85 Nuclear
    [Show full text]
  • Standards Confirmed
    Standards published New International Standards published between 01 August and 31 August 2017 * Available in English only ** French version of standard previously published in English only Price group IIW International Institute of Welding ISO 14271:2017 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds B ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength F PC 280 Management consultancy ISO 20700:2017 Guidelines for management consultancy services E REMCO Committee on reference materials ISO Guide 35:2017 * Reference materials — Guidance for characterization and assessment of homogeneity and stability H TC 4 Rolling bearings ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan D ISO 15242-3:2017 Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface B ISO 15242-4:2017 * Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface B ISO 20015:2017 * Spherical plain bearings — Method for the calculation of static and dynamic load ratings B TC 6 Paper, board and pulps ISO 11480:2017 Pulp, paper and board — Determination of total chlorine and organically bound chlorine C ISO 8791-3:2017 * Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method C TC 8 Ships and marine technology ISO 20155:2017 * Ships
    [Show full text]
  • International Standards in Process CD Registered
    International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Stand- ard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft Interna- tional Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 April to 30 April 2017 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. COPOLCO Committee on consumer policy ISO/IEC CD Guide Development of service standards — Recommendations for addressing consumer issues 76 TC 2 Fasteners ISO/CD 3269 Fasteners — Acceptance inspection TC 4 Rolling bearings ISO/CD 9628 Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances TC 17 Steel ISO/CD 21123 Hexagonal steel wire mesh products for civil engineering purposes ISO/CD 21124 Chain link steel wire mesh products for civil engineering purposes TC 23 Tractors and machinery for agriculture and forestry ISO/CD 11783-3 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link
    [Show full text]
  • Selección De Materiales En El Diseño De Máquinas
    POLITEXT / INGENIERÍA MECÁNICA 181 POLITEXT Los objetivos de este texto son pro- Carles Riba es Doctor Ingeniero Industrial, profesor titular porcionar criterios para la selección de Carles Riba Romeva del Departamento de Ingeniería Mecánica de la UPC y materiales en el diseño de máquinas y, director del Centro de Diseño de Equipos Industriales de a la vez, ofrecer una panorámica de los la UPC (CDEI-UPC), perteneciente a la Red de Centros de Innovación Tecnológica (Xarxa IT) impulsada por principales materiales empleados en esta la Generalitat de Catalunya. Asimismo, es director del disciplina. En él se facilita una estructura 9 788483 017388 978-84-8301-738-8 ISBN Master en Ingeniería Mecánica y Equipamiento Industrial común de tablas de propiedades y se (EMEI) de la Fundació UPC, e impulsor y representante de resaltan los aspectos más caracterís- Carles Riba Romeva la UPC en el Centro de Innovación de los Fabricantes de ticos de la aplicación de cada uno de ellos. El contenido se Bienes de Equipo (CEQUIP). El autor tiene una dilatada estructura en cuatro capítulos. El primero trata de los criterios experiencia docente y de investigación en la teoría y el de selección; el segundo estudia los materiales férricos, aceros diseño de máquinas y sistemas, y ha realizado numerosas y fundiciones; el tercero trata de los materiales metálicos no colaboraciones industriales. férricos, y el último, de los materiales no metálicos (plásticos, elastómeros, materiales compuestos y cerámicas. Es la traducción de la segunda edición de la obra original en catalán, revisada y ampliada. Como novedad básica respecto a Selección de materiales la primera edición, toma como referencia las normas EN (espe- cialmente en los metales) y/o las ISO, y en un anexo se propor- cionan tablas de equivalencias con las últimas normas vigentes en el diseño de máquinas de los principales países europeos (AENOR, AFNOR, BS, DIN y UNI) y con las normas americanas (ASTM, AISI, etc.) y japo- nesas (JIS).
    [Show full text]
  • Tow Bars 2 ISO 12619-8:2017 Road Vehicles
    Nr. Standard reference Title 1 ISO 9667:2017 Aircraft ground support equipment - Tow bars Road vehicles - Compressed gaseous hydrogen (CGH2) and 2 ISO 12619-8:2017 hydrogen/natural gas blends fuel system components - Part 8: Pressure indicator Coal - Determination of plastic properties - Constant-torque Gieseler 3 ISO 10329:2017 plastometer method 4 ISO 1107:2017 Fishing nets - Netting - Basic terms and definitions Textiles - Quantitative chemical analysis - Part 7: Mixtures of 5 ISO 1833-7:2017 polyamide with certain other fibres (method using formic acid) Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain 6 ISO 1833-11:2017 cellulose fibres with certain other fibres (method using sulfuric acid) Rubber, vulcanized or thermoplastic - Determination of flex cracking 7 ISO 132:2017 and crack growth (De Mattia) Rubber, vulcanized or thermoplastic - Determination of low- 8 ISO 812:2017 temperature brittleness Rubber, vulcanized or thermoplastic - Determination of adhesion to 9 ISO 814:2017 metal - Two-plate method 10 ISO 5603:2017 Rubber, vulcanized - Determination of adhesion to wire cord Rubber, vulcanized or thermoplastic - Rubber sheets and rubber- 11 ISO 6179:2017 coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) 12 ISO 12493:2017 Rubber, vulcanized - Determination of stress in tension upon heating Rubber, raw - Determination of the glass transition temperature by 13 ISO 22768:2017 differential scanning calorimetry (DSC) 14 ISO 17717:2017 Meteorological balloons - Specification
    [Show full text]
  • A Quick Look at Our Laboratory Instruments for Rubber and Plastic Testing Undefined
    WIKI CATALOGUE A quick look at our laboratory instruments for rubber and plastic testing undefined INDEX INSTRUMENT Page Gibitre Instruments 5 Gibitre Programs: a complete solution for your lab 6 Datagest Software 7 RHEOCHECK MD - Drive 8 Rheocheck Profile OD - PC 9 Mooney Check - Drive 10 Constant Volume Sample Cutter 11 Tackiness Check - PC 12 Tensor Check Profile - PC 13 Density Check - PC 14 Low Temperature Check 15 Ozone Check - UV 16 Automatic Hardness Check 17 Multi-Unit Automatic Hardness Check 18 Micro-IRHD Laser Revolution 19 Manual Digital Hardness Check 20 ACCREDIA Calibration Service 21 Certified Samples 22 Rebound Check 23 De Mattia Fatigue Check 24 De Mattia Fatigue Check - Plus 25 Abrasion Check 26 Hose Abrasion Check 27 Block Oven Aging Check 28 Compression Set - Constant Force 29 Compression Set - Standard 29 Compression Set - PV 3307 30 Compression Set - PV 3330 30 Compression Set - Adjustable 31 Flammability Check 32 Laboratory Press 33 Multi-Head Die Cutter 34 Die Cutters 35 Splitting Machine 36 Maintenance and Calibration Service 37 Remote assistance Service using Team Viewer Software 37 Custom Setups 38 Gibitre Instruments Development, production and calibration of instruments for rubber and plastic testing Gibitre Instruments is an Italian company foun- Management of components produces. ded in 1979 and is dedicated to the production The storage of all production and purcha- All the calibrations carried out have complete of measuring instruments for measuring the se components is carried out by rotating traceability to the reference instruments. The physical-mechanical properties of rubber and warehouses to ensure complete traceability of Calibration Reports allow the customer to go plastic.
    [Show full text]
  • High Performance Polymers for Oil and Gas 2014
    High Performance POLYMERS for Oil & Gas 2014 Organised by: Sponsors & Exhibitors: INNOVATIONS WITH IMPACT Supporting Associations & Media Partners: World ils Crowne Plaza Roxburghe Edinburgh, Scotland 15-16 April 2014 Organised by ISBN: 978-1-90930-99-2 © Smithers Information Ltd, 2014 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of the publisher, Smithers Information Ltd, Shawbury, Shrewsbury, Shropshire, SY4 4NR, UK. The views expressed in this publication are those of the individual authors and do not necessarily correspond to those of Smithers Information Ltd. This publication is published on the basis that no responsibility or liability of any nature shall attach to Smithers Information Ltd arising out of or in connection with any utilization in any form any material contained in this publication. Contents OPENING SESSION: THE ROLE OF NON-METALLICS IN FUTURE OF OIL AND GAS EXPLORATION Paper 1 Opening Keynote Operator Perspective: challenges and polymeric requirements - current and future John Lawson ETC, Senior Technology Advisor, Chevron Paper 2 Offshore Drilling: Use of elastomeric materials and future challenges Nicolas Arteaga, Process Engineer, Cameron paper unavailable at time of print Paper 3 Case study: Installation of the world's first subsea rehabilitation system based on composite material Robert Walters, Founder & Chairman, APS Dubai CORROSION AND FAILURE: DEVELOPING QUALIFICATIONS AND SPECIFICATIONS FOR FUTURE INNOVATIONS Paper 4 Nonmetallic Program for the Oil and Gas industry - Practical challenges against the utilization of nonmetallics at Saudi Aramco and solutions to successful applications.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 11
    Hrvatski zavod za norme Oglasnik za normativne dokumente 11/2017 studeni, 2017. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije .................................................................................................. A3 1.1 Hrvatske norme ....................................................................................................................................... A3 1. Nacrti hrvatskih norma ............................................................................................................................ 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ................................................................................ A11 1.4 Povučene hrvatske norme ...................................................................................................................... A3 1.5 Povučeni nacrti hrvatskih norma ............................................................................................................. 1.6 Ispravci
    [Show full text]