DOCSLIB.ORG

Tow Bars 2 ISO 12619-8:2017 Road Vehicles

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tow Bars 2 ISO 12619-8:2017 Road Vehicles Nr. Standard reference Title 1 ISO 9667:2017 Aircraft ground support equipment - Tow bars Road vehicles - Compressed gaseous hydrogen (CGH2) and 2 ISO 12619-8:2017 hydrogen/natural gas blends fuel system components - Part 8: Pressure indicator Coal - Determination of plastic properties - Constant-torque Gieseler 3 ISO 10329:2017 plastometer method 4 ISO 1107:2017 Fishing nets - Netting - Basic terms and definitions Textiles - Quantitative chemical analysis - Part 7: Mixtures of 5 ISO 1833-7:2017 polyamide with certain other fibres (method using formic acid) Textiles - Quantitative chemical analysis - Part 11: Mixtures of certain 6 ISO 1833-11:2017 cellulose fibres with certain other fibres (method using sulfuric acid) Rubber, vulcanized or thermoplastic - Determination of flex cracking 7 ISO 132:2017 and crack growth (De Mattia) Rubber, vulcanized or thermoplastic - Determination of low- 8 ISO 812:2017 temperature brittleness Rubber, vulcanized or thermoplastic - Determination of adhesion to 9 ISO 814:2017 metal - Two-plate method 10 ISO 5603:2017 Rubber, vulcanized - Determination of adhesion to wire cord Rubber, vulcanized or thermoplastic - Rubber sheets and rubber- 11 ISO 6179:2017 coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) 12 ISO 12493:2017 Rubber, vulcanized - Determination of stress in tension upon heating Rubber, raw - Determination of the glass transition temperature by 13 ISO 22768:2017 differential scanning calorimetry (DSC) 14 ISO 17717:2017 Meteorological balloons - Specification Information and documentation - Collections management for archives 15 ISO/TR 19814:2017 and libraries Buildings and civil engineering works - Sealants - Paintability and paint 16 ISO/TR 20436:2017 compatibility of sealants 17 ISO 15928-4:2017 Houses - Description of performance - Part 4: Fire safety Sustainability in buildings and civil engineering works - Core rules for 18 ISO 21930:2017 environmental product declarations of construction products and services ISO 2074:2007/Amd 19 Plywood - Vocabulary - Amendment 1 1:2017 20 ISO 13943:2017 Fire safety - Vocabulary Metallic and other inorganic coatings - Electroplated coatings of 21 ISO 2082:2017 cadmium with supplementary treatments on iron or steel Mechanical vibration - Evaluation of machine vibration by ISO 7919-3:2009/Amd 22 measurements on rotating shafts - Part 3: Coupled industrial machines 1:2017 - Amendment 1 Hydraulic fluid power - Test methods for couplings actuated with or 23 ISO 18869:2017 without tools Pneumatic fluid power systems - Directional control valves - 24 ISO 20401:2017 Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors Optics and photonics - Specifications for telescopic sights - Part 1: 25 ISO 14135-1:2017 General-purpose instruments Optics and photonics - Specifications for telescopic sights - Part 2: 26 ISO 14135-2:2017 High-performance instruments Optics and optical instruments - Geodetic and surveying instruments - 27 ISO 9849:2017 Vocabulary Background information and guidance on environmental cyanide 28 ISO/TR 19588:2017 analysis 29 ISO 18504:2017 Soil quality - Sustainable remediation 30 ISO/TR 20526:2017 Account-based ticketing state of the art report Geometrical product specifications (GPS) - Dimensional and 31 ISO 8062-4:2017 geometrical tolerances for moulded parts - Part 4: General tolerances for castings using profile tolerancing in a general datum system Application of risk management for IT-networks incorporating medical devices - Part 2-9: Application guidance - Guidance for use of security 32 IEC/TR 80001-2-9:2017 assurance cases to demonstrate confidence in IEC/TR 80001-2-2 security capabilities 33 IWA 26:2017 Using ISO 26000:2010 in management systems Information technology - Telecommunications and information ISO/IEC/IEEE 8802- exchange between systems - Local and metropolitan area networks - 34 1Q:2016/Amd 1:2017 Specific requirements - Part 1Q: Bridges and bridged networks - Amendment 1: Path control and reservation Information technology - Telecommunications and information ISO/IEC/IEEE 8802- exchange between systems - Local and metropolitan area networks - 35 1Q:2016/Amd 3:2017 Specific requirements - Part 1Q: Bridges and bridged networks - Amendment 3: Enhancements for scheduled traffic Information technology - Telecommunications and information ISO/IEC/IEEE 8802- exchange between systems - Local and metropolitan area networks - 36 1AB:2017 Specific requirements - Part 1AB: Station and media access control connectivity discovery Software and systems engineering - Methods and tools for variability 37 ISO/IEC 26558:2017 modelling in software and systems product line Software and systems engineering - Methods and tools for variability 38 ISO/IEC 26559:2017 traceability in software and systems product line Information technology - Security techniques - Cryptographic 39 ISO/IEC 15946-5:2017 techniques based on elliptic curves - Part 5: Elliptic curve generation Information technology - Security techniques - Anonymous entity 40 ISO/IEC 20009-4:2017 authentication - Part 4: Mechanisms based on weak secrets Information technology - MPEG systems technologies - Part 4: Codec 41 ISO/IEC 23001-4:2017 configuration representation Information technology - High efficiency coding and media delivery in 42 ISO/IEC 23008-1:2017 heterogeneous environments - Part 1: MPEG media transport (MMT) Information technology - High efficiency coding and media delivery in ISO/IEC TR 23008- 43 heterogeneous environments - Part 13: MPEG media transport 13:2017 implementation guidelines Rolling bearings - Measuring methods for vibration - Part 3: Radial 44 ISO 15242-3:2017 spherical and tapered roller bearings with cylindrical bore and outside surface ISO 2575:2010/Amd Road vehicles - Symbols for controls, indicators and tell-tales - 45 6:2017 Amendment 6 ISO 2575:2010/Amd Road vehicles - Symbols for controls, indicators and tell-tales - 46 7:2017 Amendment 7 Road vehicles - Compressed gaseous hydrogen (CGH2) and 47 ISO 12619-9:2017 hydrogen/natural gas blends fuel system components - Part 9: Pressure relief valve (PRV) Road vehicles - Compressed gaseous hydrogen (CGH2) and 48 ISO 12619-10:2017 hydrogen/natural gas blends fuel system components - Part 10: Pressure relief device (PRD) Road vehicles - Compressed gaseous hydrogen (CGH2) and 49 ISO 12619-11:2017 hydrogen/natural gas blends fuel system components - Part 11: Excess flow valve Road vehicles - Compressed gaseous hydrogen (CGH2) and 50 ISO 12619-12:2017 hydrogen/natural gas blends fuel system components - Part 12: Gas- tight housing and ventilation hoses Road vehicles - Compressed gaseous hydrogen (CGH2) and 51 ISO 12619-13:2017 hydrogen/natural gas blends fuel system components - Part 13: Rigid fuel line in stainless steel Road vehicles - Compressed gaseous hydrogen (CGH2) and 52 ISO 12619-14:2017 hydrogen/natural gas blends fuel system components - Part 14: Flexible fuel line Road vehicles - Compressed gaseous hydrogen (CGH2) and 53 ISO 12619-15:2017 hydrogen/natural gas blends fuel system components - Part 15: Filter Road vehicles - Compressed gaseous hydrogen (CGH2) and 54 ISO 12619-16:2017 hydrogen/natural gas blends fuel system components - Part 16: Fittings Methods for the petrographic analysis of coals - Part 4: Method of 55 ISO 7404-4:2017 determining microlithotype, carbominerite and minerite composition Petroleum and related products - Determination of flash and fire points 56 ISO 2592:2017 - Cleveland open cup method Indexable hardmetal (carbide) inserts with rounded corners, with 57 ISO 3364:2017 cylindrical fixing hole - Dimensions 58 ISO 4250-2:2017 Earth-mover tyres and rims - Part 2: Loads and inflation pressures Animal feeding stuffs, cereals and milled cereal products - Guidelines 59 ISO 12099:2017 for the application of near infrared spectrometry Paints and varnishes - Determination of resistance to cyclic corrosion 60 ISO 11997-1:2017 conditions - Part 1: Wet (salt fog)/dry/humid 61 ISO 15110:2017 Paints and varnishes - Artificial weathering including acidic deposition Paints and varnishes - Determination of pH value - Part 1: pH 62 ISO 19396-1:2017 electrodes with glass membrane Paints and varnishes - Determination of pH value - Part 2: pH 63 ISO 19396-2:2017 electrodes with ISFET technology Non-destructive testing of welds - Phased array ultrasonic testing 64 ISO 19285:2017 (PAUT) - Acceptance levels Non-destructive testing of welds - Ultrasonic testing - Characterization 65 ISO 23279:2017 of discontinuities in welds Resistance welding - Weldability - Part 3: Evaluation procedures for 66 ISO 18278-3:2017 weldability in spot weld bonding 67 ISO 9455-15:2017 Soft soldering fluxes - Test methods - Part 15: Copper corrosion test Rubber hoses and hose assemblies - Textile-reinforced hydraulic types 68 ISO 4079:2017 for oil-based or water-based fluids - Specification 69 ISO 6943:2017 Rubber, vulcanized - Determination of tension fatigue 70 ISO 20851:2017 Synthetic rubber latex - Examination for microorganisms 71 ISO 20058:2017 General purpose rubber thread - Specification Gas cylinders - Residual pressure valves - Specification and type 72 ISO 15996:2017 testing of cylinder valves incorporating residual pressure devices Buildings and civil engineering works - Vocabulary - Part 3: 73 ISO 6707-3:2017 Sustainability terms Petroleum, petrochemical and natural gas industries - Composite 74 ISO 24817:2017 repairs for pipework - Qualification and design, installation, testing and inspection Measurement of radioactivity
Load more

Recommended publications
  • Věstníku ÚNMZ Č. 12/2017
    Ročník 2017 Úřadu pro technickou normalizaci, metrologii a státní zkušebnictví ČÍSLO 12 Zveřejněno dne 8. prosince 2017 OBSAH: ČÁST A – OZNÁMENÍ Strana: Oddíl 1. Harmonizované normy a určené normy ÚNMZ č. 115/17 o určených normách 2 ÚNMZ č. 116/17 o určených normách k nařízení vlády č. 120/2016 Sb. 3 Oddíl 2. České technické normy ÚNMZ č. 117/17 o vydání ČSN, jejich změn, oprav a zrušení 60 ÚNMZ č. 118/17 o schválení evropských norem k přímému používání jako ČSN 72 ÚNMZ č. 119/17 o zahájení zpracování návrhů českých technických norem 81 ÚNMZ č. 120/17 o veřejném projednání návrhů evropských norem CEN 110 ÚNMZ č. 121/17 o veřejném projednání návrhů evropských norem CENELEC 115 ÚNMZ č. 122/17 o veřejném projednání návrhů evropských telekomunikačních norem 117 Oddíl 3. Metrologie Oddíl 4. Autorizace Oddíl 5. Akreditace ČIA, č. 12/17 o udělení, pozastavení a zrušení akreditaci 119 Oddíl 6. Ostatní oznámení MO ČR č. 12/17 o vydání seznamu nových standardizačních dohod NATO, vydání doplňků ke standardizačním dohodám, o zrušení standardizačních dohod a přistoupení ke standardizačním dohodám 131 ČÁST B – INFORMACE ÚNMZ č. 12/17 Informačního střediska WTO o notifikacích Členů Dohody o technických překážkách obchodu (TBT), která je nedílnou součástí Dohody o zřízení Světové obchodní organizace (WTO) 138 ČÁST C – SDĚLENÍ ÚNMZ o ukončení platnosti norem 143 ČAS, p.o. ceník zboží a služeb poskytovaných Českou agenturou pro standardizaci, p. o. 144 Věstník č. 12/2017 ČÁST A – OZNÁMENÍ Oddíl 1. Harmonizované normy a určené normy OZNÁMENÍ č. 115/17 Úřadu pro technickou normalizaci, metrologii a státní zkušebnictví o určených normách Úřad pro technickou normalizaci, metrologii a státní zkušebnictví oznamuje podle § 4a odst.
    [Show full text]
  • 국제표준 진행현황 September 25, 2017 / Vol.215
    국제표준 진행현황 September 25, 2017 / Vol.215 ISO에서는 매월 국제표준 현황표를 제공합니다. 이번 제 210호에서는 2017년 9월 현재 ISO 기술위원회에서 진행 중인 FDIS (최종국제표준안) 및 SP (발간표준) 현황표를 게재합니다. 원문은 (https://www.iso.org/iso- update.html)를 참고하여 주시기 바랍니다. FDIS(최종국제표준안) 2017년 8월 31일자 투표 마감일 Rolling bearings TC 4 구름 베어링 Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings ISO/FDIS 20056-2 2017-10-10 구름 베어링 - 세라믹으로 만든 전동체가 있는 하이브리드 베어링에 대한 정 격 하중 - 제2부: 정정격하중 Paper, board and pulps TC 6 종이, 판지 및 펄프 Paper, board and pulps - General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 ISO/FDIS 4094 (Revision of ISO 4094:2005) 2017-10-21 (ISO 4094:2005 개정) 종이, 판지 및 펄프 - 레벨 3의 광학기준교환표준 문제에 승인된 실험실 역량 의 일반 요구사항 Ships and marine technology TC 8 선박 및 해양기술 Ships and marine technology - Servicing of inflatable life-saving ISO/FDIS 18079-1 appliances - Part 1: General 2017-10-24 선박 및 해양기술 - 팽창식 구명 장비의 정비 - 제1부: 일반 Ships and marine technology - Servicing of inflatable life-saving ISO/FDIS 18079-2 appliances - Part 2: Inflatable life rafts 2017-10-24 선박 및 해양기술 - 팽창식 구명 장비의 정비 - 제2부: 팽창식 구명뗏목 Ships and marine technology - Servicing of inflatable life-saving ISO/FDIS 18079-3 appliances - Part 3: Inflatable lifejackets 2017-10-24 선박 및 해양기술 - 팽창식 구명 장비의 정비 - 제3부: 팽창식 구명조끼 Ships and marine technology - Servicing of inflatable life-saving ISO/FDIS 18079-4 appliances - Part 4: Marine evacuation systems 2017-10-24 선박 및 해양기술 - 팽창식 구명 장비의 정비 - 제4부: 해양 피난 시스템 Ships and marine
    [Show full text]
  • 2011-11 (Adobe Reader)
    Turinys STANDARTIZACIJA .......................................................................................... 5 IÐLEISTI LIETUVOS STANDARTAi IR KITI LEIDINIAI ............................................ 5 NETEKÆ GALIOS LIETUVOS STANDARTAI IR KITI LEIDINIAI ............................. 15 NETEKSIANTIS GALIOS LIETUVOS STANDARTAS ............................................ 19 TARPTAUTINIØ IR EUROPOS ÁSTAIGØ BEI ORGANIZACIJØ STANDARTAI IR KITI LEIDINIAI, KURIUOS DEPARTAMENTAS GAVO SPALIO MËN. .............. 20 TARPTAUTINËS STANDARTIZACIJOS ORGANIZACIJOS STANDARTAI IR KITI LEIDINIAI .................. 20 TARPTAUTINËS ELEKTROTECHNIKOS KOMISIJOS STANDARTAI IR KITI LEIDINIAI ...................... 24 RATIFIKUOTI EUROPOS STANDARTIZACIJOS KOMITETO STANDARTAI IR KITI LEIDINIAI ............... 25 RATIFIKUOTI EUROPOS ELEKTROTECHNIKOS STANDARTIZACIJOS KOMITETO STANDARTAI IR KITI LEIDINIAI .................................................................................................. 28 RATIFIKUOTI EUROPOS TELEKOMUNIKACIJØ STANDARTØ INSTITUTO STANDARTAI IR KITI LEIDINIAI .. 30 REDAKCINË KOLEGIJA Redagavo A. Treèiokaitë Maketavo B. Meðkënienë 2011-11-11 © Lietuvos standartizacijos departamentas, 2011 Lietuvos standartizacijos departamento BIULETENIS 2011 Nr. 11 VILNIUS, 2011 Lietuvos standartizacijos departamentas T. Kosciuðkos g. 30 LT-01100 Vilnius Telefonas: (8~5) 270 9360 El. paðtas: [email protected] Interneto tinklalapis: http://www.lsd.lt LIETUVOS STANDARTIZACIJOS DEPARTAMENTO BIULETENIS 2011 Nr. 11 STANDARTIZACIJA IÐLEISTI LIETUVOS STANDARTAI
    [Show full text]
  • Standards Action Layout SAV3825
    PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 38, #25 June 22, 2007 Contents American National Standards Call for Comment on Standards Proposals................................................. 2 Call for Comment Contact Information........................................................ 5 Initiation of Canvasses.................................................................................. 7 Final Actions .................................................................................................. 8 Project Initiation Notification System (PINS) .............................................. 9 International Standards ISO Draft Standards....................................................................................... 12 ISO and IEC Newly Published Standards .................................................... 13 Proposed Foreign Government Regulations ................................................ 16 Information Concerning.................................................................................. 17 American National Standards Call for comment on proposals listed This section solicits public comments on proposed draft new American National Standards, including the national adoption of Ordering Instructions for "Call-for-Comment" Listings ISO and IEC standards as American National Standards, and on 1. Order from the organization indicated for the specific proposals to revise, reaffirm or withdraw approval of existing proposal. American National Standards. A draft
    [Show full text]
  • International Standards in Process CD Registered
    International Standards in process TC 41 Pulleys and belts (including veebelts) An International Standard is the result of an agreement between the ISO/CD 7590 Steel cord conveyor belts — Methods for the member bodies of ISO. A first important step towards an International determination of total thickness and cover Standard takes the form of a committee draft (CD) - this is circulated thickness for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to TC 43 Acoustics the Central Secretariat for processing as a draft International Stand- ISO/CD 7779 Acoustics — Measurement of airborne noise ard (DIS). The DIS requires approval by at least 75 % of the member emitted by information technology and tel- bodies casting a vote. A confirmation vote is subsequently carried ecommunications equipment out on a final draft International Standard (FDIS), the approval criteria TC 45 Rubber and rubber products remaining the same. ISO/CD 2921 Rubber, vulcanized — Determination of low- temperature retraction (TR test) TC 61 Plastics ISO/CD 21475 Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation TC 79 Light metals and their alloys CD registered ISO/DTS Guideline for the selection of coating types, 16688 tests and methods of assessing the perfor- mance of coated aluminium in architectural Period from 01 April to 30 April 2017 applications These documents are currently under consideration in the technical TC 85 Nuclear
    [Show full text]
  • Standards Confirmed
    Standards published New International Standards published between 01 August and 31 August 2017 * Available in English only ** French version of standard previously published in English only Price group IIW International Institute of Welding ISO 14271:2017 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds B ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength F PC 280 Management consultancy ISO 20700:2017 Guidelines for management consultancy services E REMCO Committee on reference materials ISO Guide 35:2017 * Reference materials — Guidance for characterization and assessment of homogeneity and stability H TC 4 Rolling bearings ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan D ISO 15242-3:2017 Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface B ISO 15242-4:2017 * Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface B ISO 20015:2017 * Spherical plain bearings — Method for the calculation of static and dynamic load ratings B TC 6 Paper, board and pulps ISO 11480:2017 Pulp, paper and board — Determination of total chlorine and organically bound chlorine C ISO 8791-3:2017 * Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method C TC 8 Ships and marine technology ISO 20155:2017 * Ships
    [Show full text]
  • International Standards in Process CD Registered
    International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Stand- ard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft Interna- tional Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 April to 30 April 2017 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. COPOLCO Committee on consumer policy ISO/IEC CD Guide Development of service standards — Recommendations for addressing consumer issues 76 TC 2 Fasteners ISO/CD 3269 Fasteners — Acceptance inspection TC 4 Rolling bearings ISO/CD 9628 Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances TC 17 Steel ISO/CD 21123 Hexagonal steel wire mesh products for civil engineering purposes ISO/CD 21124 Chain link steel wire mesh products for civil engineering purposes TC 23 Tractors and machinery for agriculture and forestry ISO/CD 11783-3 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link
    [Show full text]
  • Selección De Materiales En El Diseño De Máquinas
    POLITEXT / INGENIERÍA MECÁNICA 181 POLITEXT Los objetivos de este texto son pro- Carles Riba es Doctor Ingeniero Industrial, profesor titular porcionar criterios para la selección de Carles Riba Romeva del Departamento de Ingeniería Mecánica de la UPC y materiales en el diseño de máquinas y, director del Centro de Diseño de Equipos Industriales de a la vez, ofrecer una panorámica de los la UPC (CDEI-UPC), perteneciente a la Red de Centros de Innovación Tecnológica (Xarxa IT) impulsada por principales materiales empleados en esta la Generalitat de Catalunya. Asimismo, es director del disciplina. En él se facilita una estructura 9 788483 017388 978-84-8301-738-8 ISBN Master en Ingeniería Mecánica y Equipamiento Industrial común de tablas de propiedades y se (EMEI) de la Fundació UPC, e impulsor y representante de resaltan los aspectos más caracterís- Carles Riba Romeva la UPC en el Centro de Innovación de los Fabricantes de ticos de la aplicación de cada uno de ellos. El contenido se Bienes de Equipo (CEQUIP). El autor tiene una dilatada estructura en cuatro capítulos. El primero trata de los criterios experiencia docente y de investigación en la teoría y el de selección; el segundo estudia los materiales férricos, aceros diseño de máquinas y sistemas, y ha realizado numerosas y fundiciones; el tercero trata de los materiales metálicos no colaboraciones industriales. férricos, y el último, de los materiales no metálicos (plásticos, elastómeros, materiales compuestos y cerámicas. Es la traducción de la segunda edición de la obra original en catalán, revisada y ampliada. Como novedad básica respecto a Selección de materiales la primera edición, toma como referencia las normas EN (espe- cialmente en los metales) y/o las ISO, y en un anexo se propor- cionan tablas de equivalencias con las últimas normas vigentes en el diseño de máquinas de los principales países europeos (AENOR, AFNOR, BS, DIN y UNI) y con las normas americanas (ASTM, AISI, etc.) y japo- nesas (JIS).
    [Show full text]
  • Standardiseringsprosjekter Og Nye Standarder
    Annonseringsdato: 2017-09-27 Listenummer: 18/2017 Standardiseringsprosjekter og nye standarder Listenummer: 18/2017 Side: 1 av 139 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) prEN 1748-2-1 Glass in Building - Special basic products - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties Språk: en Kommentarfrist: 2017.11.02 prEN 13279-1 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements Språk: en Kommentarfrist: 2017.11.02 prEN 13454-1 Binders and factory made mixtures for floor screeds based on calcium sulphate - Part 1: Definitions and requirements Språk: en Kommentarfrist: 2017.10.12 prEN 17161 Design for All - Accessibility following a Design for All approach in products, goods and services - Extending the range of users Språk: en Kommentarfrist: 2017.11.02 prEN ISO 4007 Personal protective equipment - Eye and face protection - Vocabulary (ISO/DIS 4007:2017) Språk: en Kommentarfrist: 2017.10.27 prEN ISO 8384 Ships and marine technology - Dredgers - Vocabulary (ISO/DIS 8384:2017) Språk: en Kommentarfrist: 2017.11.15 prEN ISO 11139 Sterilization of health care products - Vocabulary - Terms used in sterilization and related equipment and process standards (ISO/DIS 11139:2017) Språk: en Kommentarfrist: 2017.11.02 prEN ISO 80000-3 Quantities and units - Part 3: Space and time (ISO/DIS 80000-3:2017) Språk: en Kommentarfrist: 2017.09.29 prEN ISO 80000-8 Quantities and units - Part 8: Acoustics (ISO/DIS 80000-8:2017) Språk: en Kommentarfrist: 2017.09.29 Standardforslag til høring - internasjonale (ISO) ISO/DIS 8384 Ships and marine technology - Dredgers - Vocabulary Språk: en Kommentarfrist: 2017.11.14 Listenummer: 18/2017 Side: 2 av 139 01 Generelt.
    [Show full text]
  • A Quick Look at Our Laboratory Instruments for Rubber and Plastic Testing Undefined
    WIKI CATALOGUE A quick look at our laboratory instruments for rubber and plastic testing undefined INDEX INSTRUMENT Page Gibitre Instruments 5 Gibitre Programs: a complete solution for your lab 6 Datagest Software 7 RHEOCHECK MD - Drive 8 Rheocheck Profile OD - PC 9 Mooney Check - Drive 10 Constant Volume Sample Cutter 11 Tackiness Check - PC 12 Tensor Check Profile - PC 13 Density Check - PC 14 Low Temperature Check 15 Ozone Check - UV 16 Automatic Hardness Check 17 Multi-Unit Automatic Hardness Check 18 Micro-IRHD Laser Revolution 19 Manual Digital Hardness Check 20 ACCREDIA Calibration Service 21 Certified Samples 22 Rebound Check 23 De Mattia Fatigue Check 24 De Mattia Fatigue Check - Plus 25 Abrasion Check 26 Hose Abrasion Check 27 Block Oven Aging Check 28 Compression Set - Constant Force 29 Compression Set - Standard 29 Compression Set - PV 3307 30 Compression Set - PV 3330 30 Compression Set - Adjustable 31 Flammability Check 32 Laboratory Press 33 Multi-Head Die Cutter 34 Die Cutters 35 Splitting Machine 36 Maintenance and Calibration Service 37 Remote assistance Service using Team Viewer Software 37 Custom Setups 38 Gibitre Instruments Development, production and calibration of instruments for rubber and plastic testing Gibitre Instruments is an Italian company foun- Management of components produces. ded in 1979 and is dedicated to the production The storage of all production and purcha- All the calibrations carried out have complete of measuring instruments for measuring the se components is carried out by rotating traceability to the reference instruments. The physical-mechanical properties of rubber and warehouses to ensure complete traceability of Calibration Reports allow the customer to go plastic.
    [Show full text]
  • High Performance Polymers for Oil and Gas 2014
    High Performance POLYMERS for Oil & Gas 2014 Organised by: Sponsors & Exhibitors: INNOVATIONS WITH IMPACT Supporting Associations & Media Partners: World ils Crowne Plaza Roxburghe Edinburgh, Scotland 15-16 April 2014 Organised by ISBN: 978-1-90930-99-2 © Smithers Information Ltd, 2014 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of the publisher, Smithers Information Ltd, Shawbury, Shrewsbury, Shropshire, SY4 4NR, UK. The views expressed in this publication are those of the individual authors and do not necessarily correspond to those of Smithers Information Ltd. This publication is published on the basis that no responsibility or liability of any nature shall attach to Smithers Information Ltd arising out of or in connection with any utilization in any form any material contained in this publication. Contents OPENING SESSION: THE ROLE OF NON-METALLICS IN FUTURE OF OIL AND GAS EXPLORATION Paper 1 Opening Keynote Operator Perspective: challenges and polymeric requirements - current and future John Lawson ETC, Senior Technology Advisor, Chevron Paper 2 Offshore Drilling: Use of elastomeric materials and future challenges Nicolas Arteaga, Process Engineer, Cameron paper unavailable at time of print Paper 3 Case study: Installation of the world's first subsea rehabilitation system based on composite material Robert Walters, Founder & Chairman, APS Dubai CORROSION AND FAILURE: DEVELOPING QUALIFICATIONS AND SPECIFICATIONS FOR FUTURE INNOVATIONS Paper 4 Nonmetallic Program for the Oil and Gas industry - Practical challenges against the utilization of nonmetallics at Saudi Aramco and solutions to successful applications.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 11
    Hrvatski zavod za norme Oglasnik za normativne dokumente 11/2017 studeni, 2017. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije .................................................................................................. A3 1.1 Hrvatske norme ....................................................................................................................................... A3 1. Nacrti hrvatskih norma ............................................................................................................................ 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ................................................................................ A11 1.4 Povučene hrvatske norme ...................................................................................................................... A3 1.5 Povučeni nacrti hrvatskih norma ............................................................................................................. 1.6 Ispravci
    [Show full text]