International Standards in process

TC 41 Pulleys and belts (including veebelts) An International Standard is the result of an agreement between the ISO/CD 7590 Steel cord conveyor belts — Methods for the member bodies of ISO. A first important step towards an International determination of total thickness and cover Standard takes the form of a committee draft (CD) - this is circulated thickness for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to TC 43 Acoustics the Central Secretariat for processing as a draft International Stand- ISO/CD 7779 Acoustics — Measurement of airborne noise ard (DIS). The DIS requires approval by at least 75 % of the member emitted by information technology and tel- bodies casting a vote. A confirmation vote is subsequently carried ecommunications equipment out on a final draft International Standard (FDIS), the approval criteria TC 45 Rubber and rubber products remaining the same. ISO/CD 2921 Rubber, vulcanized — Determination of low- temperature retraction (TR test) TC 61 Plastics ISO/CD 21475 Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation TC 79 Light metals and their alloys CD registered ISO/DTS Guideline for the selection of coating types, 16688 tests and methods of assessing the perfor- mance of coated aluminium in architectural Period from 01 April to 30 April 2017 applications These documents are currently under consideration in the technical TC 85 Nuclear energy, nuclear technologies, committee. and radiological protection They have been registred at the Central Secretariat. ISO/CD 8299 Nuclear fuel technology — Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric COPOLCO Committee on consumer policy acid solutions by thermal-ionization mass ISO/IEC CD Development of service standards — Recom- spectrometry Guide 76 mendations for addressing consumer issues TC 92 Fire safety TC 2 Fasteners ISO/DTR Fire safety engineering — General principles ISO/CD 3269 Fasteners — Acceptance inspection 23932-2 — Part 2: Example of a shop with dry cleaning activity TC 4 Rolling bearings TC 96 Cranes ISO/CD 9628 Rolling bearings — Insert bearings and ec- centric locking collars — Boundary dimensions ISO/CD 9927-3 Cranes — Inspections — Part 3: Tower cranes and tolerances ISO/CD Cranes — Safe use — Part 3: Tower cranes TC 17 Steel 12480-3 ISO/CD 21123 Hexagonal steel wire mesh products for civil TC 102 Iron ore and direct reduced iron engineering purposes ISO/CD TR Iron ores — Determination of various elements ISO/CD 21124 Chain link steel wire mesh products for civil 16879 — X-ray fluorescence spectrometric method engineering purposes using pressed powders TC 23 Tractors and machinery for agriculture TC 111 Round steel link chains, chain slings, and forestry components and accessories ISO/CD Tractors and machinery for agriculture and ISO/CD 2415 Forged shackles for general lifting purposes — 11783-3 forestry — Serial control and communications Dee shackles and bow shackles data network — Part 3: Data link layer TC 113 Hydrometry TC 31 Tyres, rims and valves ISO/CD 8368 Hydrometric determinations — Flow measure- ISO/CD 4251-1 Tyres (ply rating marked series) and rims for ag- ments in open channels using structures — ricultural tractors and machines — Part 1: Tyre Guidelines for selection of structure designation and dimensions, and approved rim TC 126 Tobacco and tobacco products contours ISO/CD 22253 Cigarettes — Determination of nicotine in ISO/CD 4251-2 Tyres (ply rating marked series) and rims for smoke condensates obtained under intense agricultural tractors and machines — Part 2: smoking conditions — Gas-chromatographic Tyre load ratings method TC 34 Food products TC 127 Earth-moving machinery ISO/CD 3961 Animal and vegetable fats and oils — Determi- ISO Earth-moving machinery — Hydraulic excava- nation of iodine value 7135:2009/CD tors — Terminology and commercial specifica- TC 37 Terminology and other language and Amd 1 tions — Amendment 1 content resources TC 130 Graphic technology ISO/DTR Typology of language registers ISO/CD 20294 Graphic technology — Quantification and com- 20694 munication for calculating the carbon footprint ISO/CD 20771 Legal and specialist translation services of e-media — Requirements TC 135 Non-destructive testing

ISO Update, Supplement to ISO Focus -- May 2017 1 ISO/CD 21432 Non-destructive testing — Standard test ISO/IEC CD Identification cards — Contactless integrated method for determining residual stresses by 15693-2 circuit cards — Vicinity cards — Part 2: Air neutron diffraction interface and initialization TC 142 Cleaning equipment for air and other ISO/IEC CD Identification cards — Contactless integrated gases 15693-3 circuit cards — Vicinity cards — Part 3: Anticol- lision and transmission protocol ISO/CD 15714 Method to evaluate the UV dose of in-duct UVGI air disinfection facilities ISO/IEC CD Information technology — Computer graph- 18040 ics, image processing and environmental data TC 147 Water quality representation and coding of audio, picture, ISO/DTS Water quality — Determination of four chemical multimedia and hypermedia information — Live 19620 arsenic species — Method using high-pressure actor and entity representation in mixed and liquid chromatography (HPLC) with inductively augmented reality (MAR) coupled plasma mass spectrometry (ICP-MS) ISO/CD 21675 Water quality — Determination of polyfluori- nated alkyl substances (PFAS) in water — Method using solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS) TC 163 Thermal performance and energy use DIS circulated in the built environment ISO/CD 16478 Thermal insulation products — Vacuum insu- lated panels (VIPs) — Specification Period from 01 April to 30 April 2017 TC 164 Mechanical testing of metals These documents have obtained substantial support within the ap- ISO/DTR Metallic materials — Fatigue testing — General propriate ISO technical committee. 12105 principles They have been submitted to the ISO member bodies for voting by TC 184 Automation systems and integration the date shown. * Available in English only ISO/CD 15704 Industrial automation systems — Requirements for enterprise-reference architectures and methodologies ISO/CD Industrial automation systems and integration Vote 20242-5 — Service interface for testing applications — terminates Part 5: Application program service interface TC 197 Hydrogen technologies PC 287 Chain of custody of wood ISO/CD Gaseous hydrogen — Fuelling stations — Part and wood-based products 19880-1 1: General requirements ISO/DIS 38200 * Chain of custody of wood and TC 199 Safety of machinery wood-based products 2017-06-26 ISO/CD 20607 Safety of machinery — Instruction handbook — General drafting principles TC 8 Ships and marine technology TC 204 Intelligent transport systems ISO/DIS 19897 * Ships and marine technology ISO/CD Intelligent transport systems — Geographic — Marine evacuation systems — 2017-07-19 20524-1 Data Files (GDF) — GDF5.1 — Part 1: Applica- Testing under conditions of icing tion independent map data shared between multiple sources ISO/DIS 20313 * Ships and marine technology — Cathodic protection of ships 2017-06-27 TC 207 Environmental management ISO/CD 14063 Environmental management — Environmental TC 12 Quantities and units communication — Guidelines and examples ISO/DIS * Quantities and units — Part 1: TC 224 Service activities relating to drinking 80000-1 General 2017-07-10 water supply systems and wastewater systems - Quality criteria of the service (Revision of ISO 80000-1:2009, and performance indicators ISO 80000-1:2009/Cor 1:2011) ISO/CD 20325 Service activities relating to drinking water sup- TC 17 Steel ply and wastewater systems — Guidelines for ISO/DIS 4954 * Steels for cold heading and cold stormwater management in urban areas extruding 2017-07-03 TC 279 Innovation management (Revision of ISO 4954:1993) ISO/CD 50503 Innovation management - Tools and methods for collaborative innovation - Guidance ISO/DIS 4957 * Tool steels 2017-07-03 TMBG Technical Management Board - groups ISO/IEC CD Guide to the development and inclusion of (Revision of ISO 4957:1999) Guide 63 aspects of safety in international standards for ISO/DIS 9443 * Surface quality classes for hot- medical devices rolled bars and wire rod 2017-06-28 JTC 1 Information technology (Revision of ISO 9443:1991) ISO/IEC CD Identification cards — Contactless integrated 15693-1 circuit cards — Vicinity cards — Part 1: Physi- TC 20 Aircraft and space vehicles cal characteristics ISO/DIS 20894 * Aircraft — LED based taxi- ing lightsystem — General 2017-07-10 requirements

2 ISO Update, Supplement to ISO Focus -- May 2017 ISO/DIS 22431 * Aerospace series — Pipe cou- ISO/DIS * Paints and varnishes — Determi- pling 8°30' — Dynamic beam 2017-07-12 6504-1 nation of hiding power — Part 1: 2017-07-05 seal end for ferrule, welded — Kubelka-Munk method for white Geometric configuration and light-coloured paints ISO/DIS 22433 * Aerospace series — Pipe (Revision of ISO 6504-1:1983) coupling 8°30' — Dynamic 2017-07-12 ISO/DIS * Paints and varnishes — Corro- beam seal end for elbows, 12944-5.2 sion protection of steel struc- 2017-06-20 tees and crosses — Geometric tures by protective paint systems configuration — Part 5: Protective paint ISO/DIS 22436 * Aerospace series — Pipe systems coupling 8°30' — Thread end — 2017-07-12 (Revision of ISO 12944-5:2007) Geometric configuration ISO/DIS * Paints and varnishes — Corro- ISO/DIS 22437 * Aerospace series — Pipe cou- 12944-6 sion protection of steel struc- 2017-07-10 pling 8°30' in titanium alloy — 2017-07-12 tures by protective coating Nut for welded ferrule systems — Part 6: Laboratory performance test methods ISO/DIS 22438 * Aerospace series — Pipe cou- (Revision of ISO 12944-6:1998) pling 8°30' in titanium alloy — 2017-07-12 Thrust wires ISO/DIS * Paints and varnishes — Corro- 12944-9.2 sion protection of steel struc- 2017-06-15 TC 22 Road vehicles tures by protective paint systems ISO/DIS * Road vehicles — Information — Part 9: Protective paint 17840-4 for first and second respond- 2017-07-06 systems and laboratory perfor- ers — Part 4: Propulsion energy mance test methods for offshore identification and related structures (Revision of ISO 20340:2009) ISO/DIS * Road vehicles — Product data 21308-1 exchange between chassis and 2017-07-13 TC 38 Textiles bodywork manufacturers (BEP) ISO/DIS * Textiles — Qualitative and quan- — Part 1: General principles 20418-1 titative proteomic analysis of 2017-07-05 (Revision of ISO/PAS some animal hair fibres — Part 1: 21308-1:2007) Peptide detection using LC-ESI- TC 23 Tractors and machinery for MS with protein reduction agriculture and forestry ISO/DIS 20754 * Textiles — Man-made fibres — Determination of shape factors in 2017-07-21 ISO/DIS * Agricultural machinery — Safety cross section 4254-6 — Part 6: Sprayers and liquid 2017-07-13 fertilizer distributors TC 41 Pulleys and belts (including (Revision of ISO 4254-6:2009) veebelts) ISO/DIS 10625 * Equipment for crop protection ISO/DIS 20238 * Conveyor belts — Drum friction — Sprayer nozzles — Colour 2017-07-13 testing 2017-06-27 coding for identification (Revision of ISO 10625:2005) TC 43 Acoustics ISO/DIS * Crop protection equipment 25358.2 — Droplet-size spectra from 2017-06-16 ISO/DIS * Acoustics — Soundscape — atomizers — Measurement and 12913-2 Part 2: Data collection and 2017-07-11 classification reporting requirements ISO/DIS 5687 * Equipment for harvesting — TC 44 Welding and allied Combine harvesters — Determi- 2017-06-30 processes nation and designation of grain ISO/DIS 5173 * Destructive tests on welds in tank capacity and unloading metallic materials — Bend tests 2017-07-04 device performance (Revision of ISO 5687:1999) (Revision of ISO 5173:2009, ISO ISO/DIS 13772 * Forestry machinery — Portable 5173:2009/Amd 1:2011) chain-saws — Non-manually ac- 2017-07-10 ISO/DIS * Resistance welding — Vocabu- tuated chain brake performance 17677-1 lary — Part 1: Spot, projection 2017-07-10 (Revision of ISO 13772:2009) and seam welding ISO 11783- * Tractors and machinery for (Revision of ISO 17677-1:2009) 7:2015/DAmd agriculture and forestry — Se- 2017-07-18 ISO/DIS 10042 * Welding — Arc-welded joints in 1 rial control and communications aluminium and its alloys — Qual- 2017-06-30 data network — Part 7: Imple- ity levels for imperfections ment messages application layer (Revision of ISO 10042:2005, — Amendment 1 ISO 10042:2005/Cor 1:2006) TC 27 Solid mineral fuels TC 45 Rubber and rubber ISO/DIS 20336 * Solid mineral fuels — Determina- products tion of total sulfur by Coulomb 2017-07-10 ISO/DIS 48 * Rubber, vulcanized or ther- titration method moplastic — Determination of 2017-07-21 TC 34 Food products hardness (hardness between 10 IRHD and 100 IRHD) ISO/DIS 22000 * Food safety management sys- (Revision of ISO 48:2010) tems — Requirements for any 2017-07-04 organization in the food chain ISO/DIS * Rubber, vulcanized — Determi- (Revision of ISO 22000:2005, 4666-4 nation of temperature rise and 2017-06-28 ISO 22000:2005/Cor 1:2006) resistance to fatigue in flexom- eter testing — Part 4: Constant- TC 35 Paints and varnishes stress flexometer

ISO Update, Supplement to ISO Focus -- May 2017 3 (Revision of ISO 4666-4:2007) ISO/DIS * Petroleum and natural gas indus- ISO/DIS 20463 * Rubber and rubber products 19901-9 tries — Specific requirements 2017-07-19 — Determination of combus- 2017-07-19 for offshore structures — Part 9: tion energy and carbon dioxide Structural integrity management emission from biobased and TC 71 Concrete, reinforced nonbiobased materials concrete and pre-stressed ISO/DIS 9631 * Rubber seals — Joint rings for concrete pipelines for hot-water supply up 2017-07-13 to 110 °C — Specification for the ISO/DIS * Testing methods for pervious material 17785-2 concrete — Part 2: Density and 2017-07-03 (Revision of ISO 9631:2003) void content TC 46 Information and TC 76 Transfusion, infusion documentation and injection, and blood processing equipment for ISO/DIS 20247 * Information and documenta- medical and pharmaceuti- tion — International library item 2017-07-05 identifier(ILII) cal use TC 58 Gas cylinders ISO 11418- * Containers and accessories for 2:2016/DAmd pharmaceutical preparations — 2017-07-18 ISO * Gas cylinders — Refillable com- 1 Part 2: Screw-neck glass bottles 11515:2013/ posite reinforced tubes of water 2017-07-13 for syrups — Amendment 1 DAmd 1 capacity between 450 L and 3000 L — Design, construction ISO 11418- * Containers and accessories for and testing — Amendment 1 3:2016/DAmd pharmaceutical preparations — 2017-07-18 1 Part 3: Screw-neck glass bottles TC 61 Plastics (veral) for solid and liquid dosage ISO/DIS 18485 * Peel test for the determination of forms — Amendment 1 interlaminar fracture toughness 2017-07-15 TC 83 Sports and other rec- of flexible packaging laminates reational facilities and ISO/DIS 2555 * Plastics — Resins in the liquid equipment state or as emulsions or dis- 2017-06-27 ISO/DIS * Martial arts — Protective equip- persions — Determination of 21924-1 ment for martial arts — Part 1: 2017-07-10 apparent viscosity using a single General requirements and test cylinder type rotational viscom- methods eter method (Revision of ISO 2555:1989) ISO/DIS * Martial arts — Protective equip- 21924-2 ment for martial arts — Part 2: 2017-07-10 ISO/DIS * Plastics — Differential scan- Additional requirements and test 11357-3 ning calorimetry (DSC) — Part 2017-06-29 methods for instep protectors, 3: Determination of temperature shin protectors and forearm and enthalpy of melting and protectors crystallization (Revision of ISO 11357-3:2011) ISO/DIS * Martial arts — Protective equip- 21924-3 ment for martial arts — Part 3: 2017-07-10 ISO/DIS * Plastics — Differential scanning Additional requirements and test 11357-6 calorimetry (DSC) — Part 6: 2017-06-29 methods for trunk protectors Determination of oxidation in- duction time (isothermal OIT) and ISO/DIS * Martial arts — Protective equip- oxidation induction temperature 21924-4 ment for martial arts — Part 4: 2017-07-10 (dynamic OIT) Additional requirements and test (Revision of ISO 11357-6:2008) methods for head protectors ISO/DIS * Determination of the ultimate ISO/DIS * Martial arts — Protective equip- 14855-2 aerobic biodegradability of 2017-06-30 21924-5 ment for martial arts — Part 5: 2017-07-10 plastic materials under controlled Additional requirements and test composting conditions — Meth- methods for genitial protectors od by analysis of evolved carbon and abdominal protectors dioxide — Part 2: Gravimetric ISO/DIS * Martial arts — Protective equip- measurement of carbon dioxide 21924-6 ment for martial arts — Part 6: 2017-07-10 evolved in a laboratory-scale test Additional requirements and test (Revision of ISO 14855-2:2007, methods for breast protectors for ISO 14855-2:2007/Cor 1:2009) females ISO/DIS 15033 * Plastics — Determination of ISO/DIS * Martial arts — Protective equip- caprolactam and its cyclic and 2017-06-30 21924-7 ment for martial arts — Part 7: 2017-07-10 linear oligomers by HPLC Additional requirements and (Revision of ISO 15033:2007) test methods for hand and foot ISO/DIS * Carbon-fibre-reinforced plastics protectors 20975-2 — Methods for measurement 2017-07-18 TC 85 Nuclear energy, nuclear of through-thickness laminate technologies, and radio- properties — Part 2: Considering logical protection size effects by flexural test TC 67 Materials, equipment and offshore structures for pe- troleum, petrochemical and natural gas industries

4 ISO Update, Supplement to ISO Focus -- May 2017 (Revision of ISO 2081:2008) ISO/DIS * X and gamma reference radia- 4037-3 tion for calibrating dosemeters 2017-07-14 TC 108 Mechanical vibration, and doserate meters and for shock and condition determining their response as monitoring a function of photon energy — Part 3: Calibration of area and ISO/DIS * Mechanical vibration and shock personal dosemeters and the 18437-6 — Characterization of the dy- 2017-07-10 measurement of their response namic mechanical properties of as a function of energy and angle visco-elastic materials — Part 6: of incidence Time-temperature superposition (Revision of ISO 4037-3:1999) TC 114 Horology ISO/DIS 18195 * Method for the justification of fire ISO/DIS 10553 * Horology — Procedure for partitioning in water cooled NPP 2017-07-11 evaluating the accuracy of quartz 2017-07-10 watches TC 91 Surface active agents (Revision of ISO 10553:2003) ISO/DIS 19619 * Surface active agents — Deter- TC 119 Powder metallurgy mination of free propylene oxide 2017-06-26 ISO/DIS * Metallic powders — Determina- content in propylene oxide ad- 3923-1 tion of apparent density — Part 2017-07-18 duct surfactants — GC method 1: Funnel method TC 94 Personal safety -- Pro- (Revision of ISO 3923-1:2008) tective clothing and TC 121 Anaesthetic and respiratory equipment equipment ISO/DIS * Surgical drapes, gowns and ISO 80601- * Medical electrical equip- 22610.2 clean air suits, used as medical 2017-06-05 2-13:2011/ ment — Part 2-13: Particular 2017-07-03 devices, for patients, clinical staff DAmd 2 requirements for basic safety and equipment — Test method and essential performance of to determine the resistance to an anaesthetic workstation — wet bacterial penetration Amendment 2 (Revision of ISO 22610:2006) TC 122 Packaging TC 96 Cranes ISO/DIS 14375 * Child-resistant non-reclosable ISO/DIS * Cranes — Design principles for packaging for pharmaceutical 2017-06-30 8686-2 loads and load combinations — 2017-07-19 products — Requirements and Part 2: Mobile cranes testing (Revision of ISO 8686-2:2004) ISO/DIS 28862 * Packaging — Child-resistant TC 102 Iron ore and direct reduced packaging — Requirements and 2017-06-30 iron testing procedures for non- reclosable packages for non- ISO/DIS 4701 * Iron ores and direct reduced iron pharmaceutical products — Determination of size distribu- 2017-07-05 tion by sieving TC 138 Plastics pipes, fittings and (Revision of ISO 4701:2008, ISO valves for the transport of 4701:2008/Cor 1:2010) fluids TC 106 Dentistry ISO/DIS * Plastics piping systems for reno- ISO/DIS 10477 * Dentistry — Polymer-based 11297-4 vation of underground drainage 2017-06-26 crown and veneering materials 2017-07-10 and sewerage networks under pressure — Part 4: Lining with (Revision of ISO 10477:2004) cured-in-place pipes ISO/DIS 20569 * Dentistry — Trephine burs TC 146 Air quality 2017-07-14 ISO/DIS * Indoor air — Part 34: Strategies 16000-34 for the measurement of airborne 2017-06-29 ISO/DIS 20570 * Dentistry — Oral surgical scalpel particles handle 2017-07-18 TC 147 Water quality ISO/DIS 10704 * Water quality — Gross alpha and ISO/DIS 20608 * Dentistry — Powder jet hand- gross beta activity — Test meth- 2017-07-03 pieces and powders 2017-07-13 od using thin source deposit (Revision of ISO 10704:2009) ISO/DIS * Dentistry — Stationary dental ISO 11348- * Water quality — Determination 7494-1 units and dental patient chairs — 2017-07-03 1:2007/DAmd of the inhibitory effect of water 2017-07-13 Part 1: General requirements and 1 samples on the light emission test methods of Vibrio fischeri (Luminescent (Revision of ISO 7494-1:2011, bacteria test) — Part 1: Method ISO 6875:2011) using freshly prepared bacteria ISO/DIS 10650 * Dentistry — Powered polymeri- — Amendment 1 zation activators 2017-07-10 ISO 11348- * Water quality — Determination 2:2007/DAmd of the inhibitory effect of water 2017-07-13 (Revision of ISO 10650:2015) 1 samples on the light emission TC 107 Metallic and other inorgan- of Vibrio fischeri (Luminescent ic coatings bacteria test) — Part 2: Method using liquid-dried bacteria — ISO/DIS * Metallic and other inorganic Amendment 1 2081.2 coatings — Electroplated coat- 2017-06-20 ings of zinc with supplementary treatments on iron or steel

ISO Update, Supplement to ISO Focus -- May 2017 5 ISO 11348- * Water quality — Determination ISO 23551- * Safety and control devices for 3:2007/DAmd of the inhibitory effect of water 2017-07-13 8:2016/DAmd gas burners and gas-burning 2017-07-03 1 samples on the light emission 1 appliances — Particular require- of Vibrio fischeri (Luminescent ments — Part 8: Multifunctional bacteria test) — Part 3: Method controls — Amendment 1: Over- using freeze-dried bacteria — heating safety devices Amendment 1 TC 163 Thermal performance and TC 150 Implants for surgery energy use in the built ISO/DIS 14607 * Non-active surgical implants — environment Mammary implants — Particular 2017-07-10 ISO/DIS * Thermal insulation — Building requirements 9869-2 elements — In-situ measure- 2017-06-29 (Revision of ISO 14607:2007) ment of thermal resistance and ISO/DIS * Implants for surgery — Cleanli- thermal transmittance — Part 2: 19227.2 ness of orthopedic implants — 2017-06-20 Infrared method for frame struc- General requirements ture dwelling ISO/DIS * Guidance for the preparation and TC 164 Mechanical testing of 23500-1 quality management of fluids 2017-06-30 metals for haemodialysis and related ISO/DIS 10113 * Metallic materials — Sheet and therapies — Part 1: General strip — Determination of plastic 2017-07-10 requirements strain ratio (Revision of ISO 23500:2014) (Revision of ISO 10113:2006) ISO/DIS * Guidance for the preparation and TC 165 Timber structures 23500-2 quality management of fluids for 2017-06-30 haemodialysis and related thera- ISO/DIS * Timber structures — Cross pies — Part 2: Water treatment 16696-1 laminated timber — Part 1: 2017-07-10 equipment for haemodialysis ap- Component performance and plications and related therapies production requirements (Revision of ISO 26722:2014) ISO/DIS * Timber structures — Joist hang- ISO/DIS * Guidance for the preparation and 19323.2 ers — Test methods 2017-05-30 23500-3 quality management of fluids for 2017-06-30 haemodialysis and related thera- TC 167 Steel and aluminium pies — Part 3: Water for haemo- structures dialysis and related therapies (Revision of ISO 13959:2014) ISO/DIS 17607 * Steel structures — Execution of structural steelwork 2017-07-10 ISO/DIS * Guidance for the preparation and 23500-4 quality management of fluids for 2017-06-30 (Revision of ISO 10721-2:1999) haemodialysis and related thera- pies — Part 4: Concentrates TC 172 Optics and photonics for haemodialysis and related ISO/DIS 13666 * Ophthalmic optics — Spectacle therapies lenses — Vocabulary 2017-07-21 (Revision of ISO 13958:2014) ISO/DIS * Guidance for the preparation and (Revision of ISO 13666:2012) 23500-5 quality management of fluids 2017-06-30 ISO/DIS 11990 * Lasers and laser-related equip- for haemodialysis and related ment — Determination of laser 2017-06-29 therapies — Part 5: Quality of resistance of tracheal tube shaft dialysis fluid for haemodialysis and tracheal cuffs and related therapies (Revision of ISO 11990-1:2011, (Revision of ISO 11663:2014) ISO 11990-2:2010) TC 156 Corrosion of metals and ISO/DIS 17915 * Optics and photonics — Meas- alloys urement method of semiconduc- 2017-07-05 ISO/DIS 20728 * Corrosion of metal and alloys tor lasers for sensing — Determination of resistance 2017-07-19 (Revision of ISO/TS 17915:2013) of magnesium alloys to stress TC 180 Solar energy corrosion cracking ISO/DIS 9060 * Solar energy — Specification TC 159 Ergonomics and classification of instruments 2017-07-10 ISO/DIS * Ergonomics of human-system for measuring hemispherical 9241-220.2 interaction — Part 220: Process- 2017-06-15 solar and direct solar radiation es for enabling, executing and (Revision of ISO 9060:1990) assessing human-centred design TC 183 Copper, lead, zinc within organizations and nickel ores and TC 161 Controls and protective concentrates devices for gas and/or oil ISO/DIS 12743 * Copper, lead, zinc and nickel ISO/DIS * Safety and control devices for concentrates — Sampling proce- 2017-07-11 23551-2 gas burners and gas-burning 2017-07-03 dures for determination of metal appliances — Particular require- and moisture content ments — Part 2: Pressure (Revision of ISO 12743:2006) regulators TC 186 Cutlery and table and dec- (Revision of ISO 23551-2:2006) orative metal hollow-ware ISO/DIS * Materials and articles in contact 8442-9 with foodstuffs — Cutlery and ta- 2017-07-03 ble holloware — Part 9: Require- ments for ceramic knives

6 ISO Update, Supplement to ISO Focus -- May 2017 TC 190 Soil quality ISO/DIS * Health informatics — Electronic 13606-5 health record communication — 2017-07-10 ISO/DIS 15952 * Soil quality — Effects of pol- Part 5: Interface specification lutants on juvenile land snails 2017-07-03 (Revision of ISO 13606-5:2010) (Helicidae) — Determination of the effects on growth by soil TC 221 Geosynthetics contamination ISO/DIS 24576 * Geosynthetic — Test method (Revision of ISO 15952:2006) for determining the resistance of 2017-07-12 ISO/DIS 20130 * Soil quality - Measurement of polymeric geosynthetic barriers enzyme activity patterns in soil 2017-06-27 to environmental stress cracking samples using colorimetric sub- TC 249 Traditional chinese strates in micro-well plates medicine ISO/DIS 15175 * Soil quality — Characterization of contaminated soil related to 2017-07-13 ISO/DIS 21371 * Traditional Chinese medicine — groundwater protection Labelling requirements of prod- 2017-06-30 (Revision of ISO 15175:2004) ucts intended for oral or topical use in and as traditional Chinese TC 197 Hydrogen technologies medicine (TCM) ISO/DIS Gaseous hydrogen — Fueling TC 282 Water reuse 19880-3.2 stations — Part 3: Valves 2017-06-12 ISO/DIS 20426 * Guidelines for health risk as- sessment and management for 2017-07-20 TC 204 Intelligent transport non-potable water reuse systems TC 290 Online reputation ISO/DIS * Intelligent transport systems — ISO/DIS 20488 * Online consumer reviews — 13185-3 Vehicle interface for provisioning 2017-06-26 Principles and requirements for 2017-07-10 and support of ITS Services — their collection, moderation and Part 3: Unified vehicle interface publication protocol (UVIP) server and client API specification JTC 1 Information technology ISO/DIS * Intelligent transport systems ISO/IEC DIS * Information Technology — 17572-2 (ITS) — Location referencing for 2017-06-28 22275 Programming languages, their 2017-07-05 geographic databases — Part 2: environments, and system soft- Pre-coded location references ware interfaces — ECMAScript® (pre-coded profile) Specification Suite (Revision of ISO 17572-2:2015) (Revision of ISO/IEC 16262:2011) ISO/DIS 18750 * Intelligent transport systems — Co-operative ITS — Local 2017-06-27 ISO/IEC DIS * Information Technology — Tel- dynamic map 22425 ecommunications and informa- 2017-07-04 (Revision of ISO/TS 18750:2015) tion exchange between systems — NFC-SEC Test Methods TC 207 Environmental management ISO/IEC DIS * Information technology — 30140-1.3 Underwater acoustic sensor 2017-06-02 ISO/DIS 14080 * Greenhouse gas management network (UWASN) — Part 1: and related activities — Frame- 2017-07-21 Overview and requirements work and principles for method- ologies on climate actions ISO/IEC DIS * Systems and software engineer- 29110-3-2 ing — Lifecycle profiles for Very 2017-07-03 TC 211 Geographic information/ Small Entities (VSEs) — Part 3-2: Geomatics Conformity certification scheme ISO/DIS 19165 * Geographic information — ISO/IEC DIS * Information technology — Mixed Preservation of digital data and 2017-07-21 18039 and augmented reality (MAR) 2017-06-28 metadata reference model TC 215 Health informatics (Revision of ISO/IEC CD 18521-1) ISO/DIS * Health informatics — Electronic 13606-1 health record communication — 2017-07-10 ISO/IEC DIS * Information technology — Imple- Part 1: Reference model 14763-4 mentation and operation of cus- 2017-07-10 (Revision of ISO 13606-1:2008) tomer premises cabling — Part 4: Measurement of end-to-end ISO/DIS * Health informatics — Electronic (E2E)-Links 13606-2 health record communication — 2017-07-10 Part 2: Archetype interchange ISO/IEC * Information technology — Ge- specification 13818-1:2015/ neric coding of moving pic- 2017-07-11 (Revision of ISO 13606-2:2008) DAmd 9 tures and associated audio information — Part 1: Systems ISO/DIS * Health informatics — Electronic — Amendment 9: Ultra-Low 13606-3 health record communication 2017-07-10 Latency and 4k and higher — Part 3: Reference archetypes resolution support for transport and term lists of JPEG 2000 video (Revision of ISO 13606-3:2009) ISO/DIS * Health informatics — Electronic 13606-4 health record communication — 2017-07-10 Part 4: Security (Revision of ISO/TS 13606-4:2009)

ISO Update, Supplement to ISO Focus -- May 2017 7 ISO/IEC * Information technology — Cod- These Final draft International Standards have been submitted to the 14496- ing of audio-visual objects — 2017-07-11 ISO member bodies for formal approval by the date shown 15:2017/DAmd Part 15: Carriage of network * Available in English only 1 abstraction layer (NAL) unit structured video in the ISO base media file format — Amend- ment 1: Handling of unspeci- Vote fied NAL unit types and other terminates improvements ISO/IEC * Information technology — MPEG TC 5 Ferrous metal pipes and 23003-1:2007/ audio technologies — Part 1: 2017-07-11 metallic fittings DAmd 4 MPEG Surround — Amendment 4: Reference software for MPEG ISO/FDIS * Ductile iron pipes, fittings, ac- surround extension for 3D audio 8179-1 cessories and valves — External 2017-06-09 zinc-based coatings — Part 1: ISO/IEC DIS * Information technology — Multi- Metallic zinc-based coatings 23006-1 media service platform technolo- 2017-07-19 with finishing layer gies — Part 1: Architecture (Revision of ISO 8179-1:2004) (Revision of ISO/IEC 23006-1:2013) ISO/FDIS * Ductile iron pipes, fittings, ac- 8179-2 cessories and valves — External 2017-06-09 ISO/IEC * Information technology — High zinc-based coatings — Part 23008-1.2/ efficiency coding and media de- 2017-07-19 2: Zinc-rich paint coating with DAmd 2 livery in heterogeneous environ- finishing layer ments — Part 1: MPEG media (Revision of ISO 8179-2:1995) transport (MMT) — Amendment 2: MMT Enhancements for mo- TC 10 Technical product bile environments documentation ISO/IEC * Information technology — High ISO/FDIS * Technical product documenta- 23008-2/ efficiency coding and media de- 2017-06-27 13567-1 tion — Organization and naming 2017-07-22 DAmd 1 livery in heterogeneous environ- of layers for CAD — Part 1: ments — Part 2: High efficiency Overview and principles video coding — Amendment 1: (Revision of ISO 13567-1:1998) Additional colour representation code point TC 20 Aircraft and space vehicles ISO/FDIS 9667 * Aircraft ground support equip- ISO/IEC * Information technology — High ment — Tow bars 2017-06-22 23008-2/ efficiency coding and media de- 2017-07-11 DAmd 2 livery in heterogeneous environ- (Revision of ISO 9667:2016) ments — Part 2: High efficiency video coding — Amendment 2: ISO/FDIS 9788 * Air cargo — Double stud tie- Main 10 still picture profile down fittings — Design and 2017-06-22 testing requirements ISO/IEC DIS * Information technology — Au- 20248 tomatic identification and data 2017-07-04 (Revision of ISO 9788:1990) capture techniques — Data TC 21 Equipment for fire protec- structures — Digital signature tion and fire fighting meta structure ISO * Fire protection equipment — ISO/IEC DIS * Information technology — User 6183:2009/ Carbon dioxide extinguishing 2017-05-30 20071-23 interface component acces- 2017-07-21 FDAmd 1 systems for use on premises sibility — Part 23: Guidance on — Design and installation — the visual presentation of audio Amendment 1 information (including captions and subtitles) TC 34 Food products ISO/IEC DIS * Information technology — User ISO/FDIS * Animal feeding stuffs, cereals 24752-8 interfaces — Universal remote 2017-07-19 12099 and milled cereal products — 2017-06-13 console — Part 8: User interface Guidelines for the application of resource framework near infrared spectrometry (Revision of ISO 12099:2010) ISO/IEC DIS * Information technology — Bio- 19784-1 metric application programming 2017-07-12 TC 35 Paints and varnishes interface — Part 1: BioAPI ISO/FDIS * Paints and varnishes — Deter- specification 11997-1 mination of resistance to cyclic 2017-06-14 (Revision of ISO/IEC 19784- corrosion conditions — Part 1: 1:2006, ISO/IEC 19784-1:2006/ Wet (salt fog)/dry/humidity Amd 1:2007, ISO/IEC 19784- (Revision of ISO 11997-1:2005) 1:2006/Amd 2:2009, ISO/IEC 19784-1:2006/Amd 3:2010) ISO/FDIS * Paints and varnishes — Artifi- 15110 cial weathering including acidic 2017-05-30 deposition (Revision of ISO 15110:2013) ISO/FDIS * Paints and varnishes — Determi- 19396-1 nation of pH value — Part 1: pH 2017-06-13 electrodes with glass membrane ISO/FDIS * Paints and varnishes — Deter- FDIS circulated 19396-2 mination of pH value — Part 2017-06-13 2: pH electrodes with ISFET technology Period from 01 April to 30 April 2017 TC 39 Machine tools

8 ISO Update, Supplement to ISO Focus -- May 2017 ISO/FDIS * Woodworking machines — ISO/FDIS * Petroleum, petrochemical and 19085-4 Safety — Part 4: Vertical panel 2017-06-02 24817 natural gas industries — Com- 2017-06-27 circular sawing machines posite repairs for pipework — Qualification and design, installa- TC 43 Acoustics tion, testing and inspection ISO/FDIS 9296 * Acoustics — Declared noise (Revision of ISO 24817:2015) emission values of information 2017-06-16 technology and telecommunica- TC 69 Applications of statistical tions equipment methods (Revision of ISO 9296:1988) ISO/FDIS * Sampling procedures for inspec- TC 45 Rubber and rubber 28590 tion by attributes — Introduction 2017-06-09 to the ISO 2859 series of stand- products ards for sampling for inspection ISO/FDIS 132 * Rubber, vulcanized or thermo- by attributes plastic — Determination of flex 2017-06-10 (Revision of ISO 2859-10:2006) cracking and crack growth (De ISO/FDIS * Sequential sampling plans for Mattia) 28591 inspection by attributes 2017-06-09 (Revision of ISO 132:2011) ISO/FDIS 812 * Rubber, vulcanized or thermo- (Revision of ISO 8422:2006) plastic — Determination of low- 2017-06-03 ISO/FDIS * Double sampling plans by at- temperature brittleness 28592 tributes with minimal sample 2017-06-09 (Revision of ISO 812:2011) sizes, indexed by producer's risk ISO/FDIS 814 * Rubber, vulcanized or ther- quality (PRQ) and consumer's moplastic — Determination of 2017-05-30 risk quality (CRQ) adhesion to metal — Two-plate (Revision of ISO 28801:2011) method ISO/FDIS * Acceptance sampling proce- (Revision of ISO 814:2011) 28593 dures by attributes — Accept- 2017-06-09 ISO/FDIS 6943 * Rubber, vulcanized — Determi- zero sampling system based on nation of tension fatigue 2017-06-03 credit principle for controlling outgoing quality (Revision of ISO 6943:2011) (Revision of ISO 18414:2006) ISO/FDIS * Rubber-covered rollers — Deter- ISO/FDIS * Combined accept-zero sam- 7267-1 mination of apparent hardness 2017-06-22 28594 pling systems and process 2017-06-24 — Part 1: IRHD method control procedures for product (Revision of ISO 7267-1:2008) acceptance ISO/FDIS * Rubber-covered rollers — Deter- (Revision of ISO 21247:2005) 7267-3 mination of apparent hardness 2017-06-22 ISO/FDIS * Acceptance sampling proce- — Part 3: Pusey and Jones 28597 dures by attributes — Specified 2017-06-09 method quality levels in nonconforming (Revision of ISO 7267-3:2011) items per million TC 46 Information and (Revision of ISO 14560:2004) documentation TC 85 Nuclear energy, nuclear ISO/FDIS 3297 * Information and documentation technologies, and radio- — International standard serial 2017-06-10 logical protection number (ISSN) ISO/FDIS * Measurement of radioactivity — (Revision of ISO 3297:2007) 19361 Determination of beta emitters 2017-06-23 TC 58 Gas cylinders activities — Test method using liquid scintillation counting ISO/FDIS * Gas cylinders — Residual pres- 15996 sure valves — Specification and 2017-06-10 TC 92 Fire safety type testing of cylinder valves ISO/FDIS * Fire safety — Vocabulary incorporating residual pressure 13943 2017-06-13 devices (Revision of ISO 15996:2005, (Revision of ISO 13943:2008) ISO 15996:2005/Amd 1:2007) ISO/FDIS * Guidelines for assessing the TC 59 Buildings and civil engi- 26367-2 adverse environmental impact of 2017-06-06 neering works fire effluents — Part 2: Meth- odology for compiling data on ISO/FDIS 9836 * Performance standards in build- environmentally significant emis- ing — Definition and calculation 2017-06-22 sions from fires of area and space indicators (Revision of ISO 9836:2011) TC 102 Iron ore and direct reduced TC 67 Materials, equipment and iron offshore structures for pe- ISO/FDIS Iron ores — Determination of troleum, petrochemical and 10204 magnesium — Flame atomic ab- 2017-06-16 natural gas industries sorption spectrometric method (Revision of ISO 10204:2015) ISO/FDIS * Petroleum, petrochemical and 17781 natural gas industries — Test 2017-05-30 TC 106 Dentistry methods for quality control of ISO/FDIS * Dentistry — Water-based ce- microstructure of ferritic/austen- 9917-2 ments — Part 2: Resin-modified 2017-05-30 itic (duplex) stainless steels cements (Revision of ISO 9917-2:2010) TC 107 Metallic and other inorgan- ic coatings

ISO Update, Supplement to ISO Focus -- May 2017 9 ISO/FDIS 2360 * Non-conductive coatings on ISO/FDIS * Terminal units for medical non-magnetic electrically con- 2017-06-07 9170-1 gas pipeline systems — Part 2017-05-30 ductive base metals — Meas- 1: Terminal units for use with urement of coating thickness compressed medical gases and — Amplitude-sensitive eddy- vacuum current method (Revision of ISO 9170-1:2008) (Revision of ISO 2360:2003) TC 130 Graphic technology TC 108 Mechanical vibration, ISO/FDIS * Graphic technology — Variable shock and condition 16613-1 content replacement — Part 1: 2017-06-21 monitoring Using PDF/X for variable content ISO 7919- * Mechanical vibration — Evalu- replacement (PDF/VCR-1) 3:2009/FDAmd ation of machine vibration by 2017-06-10 TC 131 Fluid power systems 1 measurements on rotating shafts — Part 3: Coupled industrial ISO/FDIS * Connections for fluid power machines — Amendment 1 6149-4 and general use — Ports and 2017-07-11 stud ends with ISO 261 metric ISO 7919- * Mechanical vibration — Evalu- threads and O-ring sealing — 4:2009/FDAmd ation of machine vibration by 2017-06-10 Part 4: Dimensions, design, test 1 measurements on rotating shafts methods and requirements for — Part 4: Gas turbine sets with external hex and internal hex fluid-film bearings — Amend- port plugs ment 1 (Revision of ISO 6149-4:2006) ISO 10816- * Mechanical vibration — Evalu- ISO/FDIS 3968 * Hydraulic fluid power — Filters 3:2009/FDAmd ation of machine vibration by 2017-06-10 — Evaluation of differential pres- 2017-05-30 1 measurements on non-rotating sure versus flow parts — Part 3: Industrial (Revision of ISO 3968:2001, ISO machines with nominal power 3968:2001/Cor 1:2002) above 15 kW and nominal speeds between 120 r/min and ISO/FDIS 4406 Hydraulic fluid power — Fluids 15 000 r/min when measured in — Method for coding the level of 2017-06-23 situ — Amendment 1 contamination by solid particles (Revision of ISO 4406:1999) ISO 10816- * Mechanical vibration — Evalu- 4:2009/FDAmd ation of machine vibration by 2017-06-10 TC 132 Ferroalloys 1 measurements on non-rotating ISO/FDIS 5446 * Ferromanganese — Specifica- parts — Part 4: Gas turbine tion and conditions of delivery 2017-06-23 sets with fluid-film bearings — Amendment 1 (Revision of ISO 5446:1980) ISO/FDIS * Mechanical vibration — Meas- TC 142 Cleaning equipment for air 20816-2 urement and evaluation of 2017-06-03 and other gases machine vibration — Part 2: Land-based gas turbines, steam ISO/FDIS * Cleaning of air and other gases turbines and generators in 29464 — Terminology 2017-06-23 excess of 40 MW, with fluid-film bearings and rated speeds of 1 (Revision of ISO 29464:2011) 500 r/min, 1 800 r/min, 3 000 r/ TC 146 Air quality min and 3 600 r/min (Revision of ISO 7919-2:2009, ISO/FDIS * Indoor air — Part 33: Determina- ISO 10816-2:2009) 16000-33 tion of phthalates with gas chro- 2017-06-04 matography/mass spectrometry TC 112 Vacuum technology (GC/MS) ISO/FDIS 3669 * Vacuum technology — Bakeable TC 150 Implants for surgery flanges — Dimensions of knife- 2017-06-02 edge flanges ISO/FDIS * Implants for surgery — (Revision of ISO/TS 13781 Homopolymers, copolymers and 2017-05-30 3669-2:2007) blends on poly(lactide) — In vitro degradation testing TC 119 Powder metallurgy (Revision of ISO 13781:1997, ISO/FDIS 3927 * Metallic powders, excluding ISO 15814:1999) powders for hardmetals — De- 2017-07-19 TC 159 Ergonomics termination of compressibility in uniaxial compression ISO/FDIS * Ergonomics of human-system (Revision of ISO 3927:2011) 9241-960 interaction — Part 960: Frame- 2017-06-02 work and guidance for gesture TC 121 Anaesthetic and respiratory interactions equipment ISO/FDIS 7243 * Ergonomics of the thermal envi- ISO * Anaesthetic and respiratory ronment — Assessment of heat 2017-05-31 5359:2014/ equipment — Low-pressure 2017-05-30 stress using the WBGT (wet bulb FDAmd 1 hose assemblies for use with globe temperature) index medical gases — Amendment 1 (Revision of ISO 7243:1989) ISO * Anaesthetic and respiratory TC 163 Thermal performance and 18082:2014/ equipment — Dimensions of 2017-05-30 energy use in the built FDAmd 1 non-interchangeable screw- environment threaded (NIST) low-pressure connectors for medical gases — Amendment 1

10 ISO Update, Supplement to ISO Focus -- May 2017 ISO/FDIS * Thermal performance of build- ISO/FDIS * Health informatics — Public key 12569 ings and materials — Determi- 2017-06-03 17090-5 infrastructure — Part 5: Authen- 2017-06-22 nation of specific airflow rate in tication using Healthcare PKI buildings — Tracer gas dilution credentials method TC 217 Cosmetics (Revision of ISO 12569:2012) ISO/FDIS * Guidelines on technical defini- TC 172 Optics and photonics 16128-2 tions and criteria for natural and 2017-06-22 ISO/FDIS * Ophthalmic optics — Contact organic cosmetic ingredients 18369-1 lenses — Part 1: Vocabulary, 2017-05-30 — Part 2: Criteria for ingredients classification system and and products recommendations for labelling IULTCS International Union of specifications (Revision of ISO 18369-1:2006, Leather Technologists and ISO 18369-1:2006/Amd 1:2009) Chemists Societies ISO/FDIS * Ophthalmic optics — Contact ISO/FDIS * Leather — Physical and me- 18369-2 lenses — Part 2: Tolerances 2017-05-30 17231 chanical tests — Determination 2017-07-08 of water repellency of garment (Revision of ISO 18369-2:2012) leather (Revision of ISO 17231:2006) ISO/FDIS * Ophthalmic optics — Contact 18369-3 lenses — Part 3: Measurement 2017-05-30 JTC 1 Information technology methods ISO/IEC/IEEE * Information technology — Tel- (Revision of ISO 18369-3:2006) 8802-3:2017/ ecommunications and informa- 2017-09-12 ISO/FDIS * Ophthalmic optics — Contact FDAmd 1 tion exchange between systems 18369-4 lenses — Part 4: Physicochemi- 2017-05-30 — Local and metropolitan area cal properties of contact lens networks — Specific require- materials ments — Part 3: Standard for (Revision of ISO 18369-4:2006) Ethernet — Amendment 1: Physical layer specifications and TC 205 Building environment management parameters for 100 design Mb/s operation over a single ISO/FDIS * Building environment design — balanced twisted pair cable 18566-1 Design, test methods and control 2017-05-31 (100BASE-T1) of hydronic radiant heating and ISO/IEC/ * Information technology — Tele- cooling panel systems — Part 1: IEEE FDIS communications and information 2017-09-08 Vocabulary, symbols, technical 8802-15-3 exchange between systems — specifications and requirements Local and metropolitan area net- ISO/FDIS * Building environment design works — Specific requirements 18566-2 — Design, test methods and 2017-05-31 — Part 15-3: High data rate wire- control of hydronic radiant heat- less multi-media networks ing and cooling panel systems — ISO/IEC/ * Information technology — Tel- Part 2: Determination of heating IEEE FDIS ecommunications and informa- 2017-09-08 and cooling capacity of ceiling 8802-15-6 tion exchange between systems mounted radiant panels — Local and metropolitan area ISO/FDIS * Building environment design — networks — Specific require- 18566-3 Design, test methods and control 2017-05-31 ments — Part 15-6: Wireless of hydronic radiant heating and body area network cooling panel systems — Part 3: ISO/IEC FDIS * Information technology — Secu- Design of ceiling mounted radi- 15946-5 rity techniques — Cryptographic 2017-06-10 ant panels techniques based on elliptic ISO/FDIS * Building environment design — curves — Part 5: Elliptic curve 18566-4 Design, test methods and control 2017-05-31 generation of hydronic radiant heating and (Revision of ISO/IEC 15946- cooling panel systems — Part 4: 5:2009, ISO/IEC 15946-5:2009/ Control of ceiling mounted radi- Cor 1:2012) ant heating and cooling panels ISO/IEC FDIS * Information technology — High TC 210 Quality management and 23008-1.2 efficiency coding and media de- 2017-06-23 corresponding general as- livery in heterogeneous environ- ments — Part 1: MPEG media pects for medical devices transport (MMT) ISO/FDIS * Medical devices — Recognized (Revision of ISO/IEC 23008- 16142-2 essential principles of safety and 2017-06-22 1:2014, ISO/IEC 23008-1:2014/ performance of medical devices Amd 1:2015, ISO/IEC 23008- — Part 2: General essential 1:2014/FDAmd 2, ISO/IEC principles and additional specific 23008-1:2014/Cor 1:2015, ISO/ essential principles for all IVD IEC 23008-1:2014/CD Cor 2) medical devices and guidance on the selection of standards TC 215 Health informatics ISO/FDIS * Health informatics — Digital 12052 imaging and communication 2017-07-07 in medicine (DICOM) including workflow and data management (Revision of ISO 12052:2006) Standards published

ISO Update, Supplement to ISO Focus -- May 2017 11 TC 24 Particle characterization includ- New International Standards published between 01 April and 30 April ing sieving 2017 ISO * Measurement and characterization of * Available in English only 20998-3:2017 particles by acoustic methods — Part D 3: Guidelines for non-linear theory ** French version of standard previously published in English only TC 27 Solid mineral fuels ISO * Solid mineral fuels — Guidance on the 14180:2017 sampling of coal seams D Price group TC 29 Small tools PC 277 Sustainable procurement ISO Modular taper interface with ball track 26622-1:2017 system — Part 1: Dimensions and B ISO Sustainable procurement — Guidance designation of shanks 20400:2017 G ISO 4229:2017 Assembly tools for screws and nuts — Single-head engineer's wrenches for A TC 4 Rolling bearings lower torque applications — Maximum ISO Rolling bearings — Damage and outside dimensions of heads and test 15243:2017 failures — Terms, characteristics and G torques causes TC 31 Tyres, rims and valves TC 20 Aircraft and space vehicles ISO * Tyres (ply rating marked series) and ISO 9538:2017 * Aerospace series — Hydraulic tubing 4251-1:2017 rims for agricultural tractors and D joints and fittings — Planar flexure test A machines — Part 1: Tyre designation and dimensions, and approved rim ISO * Aerospace series — Titanium tube for contours 18487-1:2017 35 MPa operating pressure — Part 1: C ISO * Tyres (ply rating marked series) and Inch series 4251-2:2017 rims for agricultural tractors and ma- C ISO * Space systems — Experience gained chines — Part 2: Tyre load ratings 16192:2017 in space projects (lessons learned) — C TC 34 Food products Principles and guidelines ISO Microbiology of the food chain — TC 22 Road vehicles 10273:2017 Horizontal method for the detection of F ISO * Internal combustion engines — Piston pathogenic Yersinia enterocolitica 6624-1:2017 rings — Part 1: Keystone rings made D ISO Microbiology of food and animal feed- of cast iron 16654:2001/ ing stuffs — Horizontal method for XZ ISO * Internal combustion engines — Piston Amd 1:2017 the detection of Escherichia coli O157 6624-3:2017 rings — Part 3: Keystone rings made D — Amendment 1: Annex B: Result of of steel interlaboratory studies ISO * Diesel engines — NOx reduction agent ISO Microbiology of the food chain — 22241-3:2017 AUS 32 — Part 3: Handling, transpor- B 22964:2017 Horizontal method for the detection of D tation, and storage Cronobacter spp. ISO/TS * Road vehicles — Design and perfor- ISO Animal and vegetable fats and oils — 15830-5:2017 mance specifications for the WorldSID C 3656:2011/ Determination of ultraviolet absorbance XZ 50th percentile male side-impact Amd 1:2017 expressed as specific UV extinction — dummy — Part 5: Dummy design Amendment 1 updates TC 37 Terminology and other language ISO/TS * Quasi-static calibration procedure for and content resources 17242:2014/ belt force transducers — Amendment 1 XZ ISO Translation services — Post-editing Amd 1:2017 18587:2017 of machine translation output C ISO Electrically propelled mopeds and — Requirements 18243:2017 motorcycles — Test specifications and F TC 41 Pulleys and belts (including safety requirements for lithium-ion bat- veebelts) tery systems ISO 5295:2017 * Synchronous belts — Calculation of TC 23 Tractors and machinery for agri- power rating and drive centre distance A culture and forestry ISO Equipment for crop protection — TC 42 Photography 5682-1:2017 Spraying equipment — Part 1: Test E methods for sprayer nozzles ISO/TS * Photography — Archiving systems 19264-1:2017 — Image quality analysis — Part 1: G ISO Equipment for crop protection — Reflective originals 5682-2:2017 Spraying equipment — Part 2: Test B methods to assess the horizontal TC 43 Acoustics transverse distribution for hydraulic ISO * Acoustics — Test methods for the sprayers 26101:2017 qualification of free-field environments D ISO Equipment for crop protection — 5682-3:2017 Spraying equipment — Part 3: Test A ISO Acoustics — Determination of sound method to assess the performance of 3745:2012/ power levels and sound energy levels XZ volume/area adjustment systems Amd 1:2017 of noise sources using sound pres- ISO 11681- Machinery for forestry — Portable sure — Precision methods for anechoic 2:2011/Amd chain-saw safety requirements and XZ rooms and hemi-anechoic rooms — 1:2017 testing — Part 2: Chain-saws for tree Amendment 1 service — Amendment 1

12 ISO Update, Supplement to ISO Focus -- May 2017 ISO * Acoustics — Measurement of the influ- ISO * Reciprocating internal combustion 11819-2:2017 ence of road surfaces on traffic noise G 8178-4:2017 engines — Exhaust emission meas- H — Part 2: The close-proximity method urement — Part 4: Steady-state and transient test cycles for different engine ISO/TS * Acoustics — Measurement of the influ- applications 11819-3:2017 ence of road surfaces on traffic noise C — Part 3: Reference tyres TC 79 Light metals and their alloys ISO/TS * Acoustics — Temperature influence on ISO * Magnesium and magnesium alloys — 13471-1:2017 tyre/road noise measurement — Part 1: C 16220:2017 Magnesium alloy ingots and castings C Correction for temperature when test- ing with the CPX method TC 102 Iron ore and direct reduced iron ISO * Underwater acoustics — Terminology ISO/TR * Iron ores — Determination of alumini- 18405:2017 A 4688-1:2017 um — Part 1: Flame atomic absorption C spectrometric method ISO * Underwater acoustics — Measurement 18406:2017 of radiated underwater sound from E TC 106 Dentistry percussive pile driving ISO 9873:2017 Dentistry — Intra-oral mirrors TC 44 Welding and allied processes B ISO 3580:2017 Welding consumables — Covered elec- trodes for manual metal arc welding of D TC 107 Metallic and other inorganic creep-resisting steels — Classification coatings ISO * Welding for aerospace applications — ISO Zinc coatings — Guidelines and 19828:2017 Visual inspection of welds C 14713-1:2017 recommendations for the protection C against corrosion of iron and steel in structures — Part 1: General principles TC 58 Gas cylinders of design and corrosion resistance ISO/TS * Gas cylinders — Seamless steel and ISO Zinc coatings — Guidelines and 15453:2017 aluminium-alloy gas cylinders — B 14713-3:2017 recommendations for the protection B Evaluation of existing gas cylinders against corrosion of iron and steel in and consideration of their safe use in structures — Part 3: Sherardizing other jurisdictions TC 118 Compressors and pneumatic TC 59 Buildings and civil engineering tools, machines and equipment works ISO 28927- Hand-held portable power tools — Test ISO * Buildings and constructed assets 1:2009/Amd methods for evaluation of vibration XZ 15686-7:2017 — Service life planning — Part 7: E 1:2017 emission — Part 1: Angle and vertical Performance evaluation for feedback grinders — Amendment 1: Cupped of service life data from practice wire brushes TC 60 Gears TC 123 Plain bearings ISO Gears — Surface temper etch inspec- ISO * Plain bearings — Testing of bearing 14104:2017 tion after grinding, chemical method C 10129:2017 metals — Resistance to corrosion by A lubricants under static conditions TC 61 Plastics ISO * Plain bearings — Quality assurance of ISO Plastics — Determination of burning 12308:2017 sample types — Definitions, applica- A 4589-1:2017 behaviour by oxygen index — Part 1: A tions and testing General requirements ISO * Plain bearings — Quality assurance of ISO Plastics — Determination of burning 13778:2017 thin-walled half bearings — Selective B 4589-2:2017 behaviour by oxygen index — Part 2: E assembly of bearings to achieve a nar- Ambient-temperature test row clearance range ISO Plastics — Determination of burning TC 127 Earth-moving machinery 4589-3:2017 behaviour by oxygen index — Part 3: D ISO 5006:2017 Earth-moving machinery — Opera- Elevated-temperature test tor's field of view — Test method and E ISO 9370:2017 Plastics — Instrumental determina- performance criteria tion of radiant exposure in weathering D TC 131 Fluid power systems tests — General guidance and basic test method ISO/TR * Pneumatic fluid power — Assessment 16194:2017 of component reliability by accelerated G TC 69 Applications of statistical life testing — General guidelines and methods procedures ISO * Control charts — Part 8: Charting TC 142 Cleaning equipment for air and 7870-8:2017 techniques for short runs and small E other gases mixed batches ISO In situ test methods for high efficiency ISO Guidance for the use of repeatability, 16170:2016 filter systems in industrial facilities F 21748:2017 reproducibility and trueness estimates F in measurement uncertainty evaluation TC 147 Water quality TC 70 Internal combustion engines ISO Water quality — Sampling — Part 16: ISO * Reciprocating internal combustion 5667-16:2017 Guidance on biotesting of samples D 8178-1:2017 engines — Exhaust emission measure- H ment — Part 1: Test-bed measurement systems of gaseous and particulate TC 150 Implants for surgery emissions

ISO Update, Supplement to ISO Focus -- May 2017 13 ISO Implants for surgery — Metallic ISO Biological evaluation of medical de- 5832-3:2016 materials — Part 3: Wrought titanium B 10993-4:2017 vices — Part 4: Selection of tests for G 6-aluminium 4-vanadium alloy interactions with blood ISO Implants for surgery — Active im- TC 202 Microbeam analysis 14708-3:2017 plantable medical devices — Part 3: G ISO * Microbeam analysis — Analytical Implantable neurostimulators 19214:2017 electron microscopy — Method of de- C TC 158 Analysis of gases termination for apparent growth direc- tion of wirelike crystals by transmission ISO Gas analysis — Comparison methods electron microscopy 12963:2017 for the determination of the composi- D tion of gas mixtures based on one- and TC 204 Intelligent transport systems two-point calibration ISO 24102- * Intelligent transport systems — Com- TC 159 Ergonomics 1:2013/Amd munications access for land mobiles XZ 1:2017 (CALM) — ITS station management — ISO Ergonomics of human-system interac- Part 1: Local management — Amend- 9241-333:2017 tion — Part 333: Stereoscopic displays E ment 1 using glasses ISO 24102- * Intelligent transport systems — Com- TC 163 Thermal performance and en- 3:2013/Amd munications access for land mobiles E ergy use in the built environment 1:2017 (CALM) — ITS station management ISO * Thermal performance of windows and — Part 3: Service access points — 19467:2017 doors — Determination of solar heat G Amendment 1 gain coefficient using solar simulator ISO 24102- * Intelligent transport systems — Com- TC 165 Timber structures 5:2013/Amd munications access for land mobiles XZ 1:2017 (CALM) — ITS station management ISO/TR * Timber structures — Vibration perfor- — Part 5: Fast service advertisement 21136:2017 mance criteria for timber floors E protocol (FSAP) — Amendment 1 ISO 29281- * Intelligent transport systems — Com- TC 172 Optics and photonics 1:2013/Amd munication access for land mobiles XZ ISO * Optics and photonics — Environmental 1:2017 (CALM) — Non-IP networking — Part 20711:2017 requirements — Test requirements for B 1: Fast networking & transport layer telescopic systems protocol (FNTP) — Amendment 1 ISO * Ophthalmic implants — Intraocu- TC 206 Fine ceramics 11979-8:2017 lar lenses — Part 8: Fundamental A ISO * Fine ceramics (advanced ceramics, requirements 19628:2017 advanced technical ceramics) — Ther- D ISO/TR * Ophthalmic implants — Intraocular mophysical properties of ceramic com- 22979:2017 lenses — Guidance on assessment of D posites — Determination of specific the need for clinical investigation of heat capacity intraocular lens design modifications ISO * Fine ceramics (advanced ceramics, TC 176 Quality management and quality 19810:2017 advanced technical ceramics) — Test B assurance method for self-cleaning performance of semiconducting photocatalytic ISO Quality management — Guidelines for materials under indoor lighting environ- 10007:2017 configuration management B ment — Measurement of water contact angle TC 182 Geotechnics TC 207 Environmental management ISO * Geotechnical investigation and test- ISO/TS * Environmental labels and declarations 22476-11:2017 ing — Field testing — Part 11: Flat C 14027:2017 — Development of product category D dilatometer test rules TC 184 Automation systems and TC 215 Health informatics integration ISO/IEEE Health informatics — Personal health ISO * Automation systems and integration — 11073- device communication — Part 10417: G 20140-5:2017 Evaluating energy efficiency and other G 10417:2017 Device specialization — Glucose meter factors of manufacturing systems that influence the environment — Part 5: TC 220 Cryogenic vessels Environmental performance evaluation ISO * Cryogenic vessels — Cleanliness for data 23208:2017 cryogenic service B ISO 22400- * Automation systems and integration — 2:2014/Amd Key performance indicators (KPIs) for XZ TC 229 Nanotechnologies 1:2017 manufacturing operations management — Part 2: Definitions and descriptions ISO/TS Nanotechnologies — Size distribution — Amendment 1: Key performance 19590:2017 and concentration of inorganic nano- D indicators for energy management particles in aqueous media via single particle inductively coupled plasma TC 190 Soil quality mass spectrometry ISO 18400- Soil quality — Sampling — Part 101: TC 238 Solid biofuels 101:2017 Framework for the preparation and ap- C plication of a sampling plan ISO Solid biofuels — Sample preparation 14780:2017 D ISO 18400- Soil quality — Sampling — Part 204: 204:2017 Guidance on sampling of soil gas G ISO Solid biofuels — Determination of 18125:2017 calorific value G TC 194 Biological and clinical evaluation of medical devices

14 ISO Update, Supplement to ISO Focus -- May 2017 ISO * Solid biofuels — Determination of ISO 14409:2011 19743:2017 content of heavy extraneous materials A TC 23 Tractors and machinery for agriculture larger than 3,15 mm and forestry TC 249 Traditional chinese medicine ISO 24631-6:2011 ISO * Traditional Chinese medicine — Gener- 19610:2017 al requirements for industrial manufac- B TC 24 Particle characterization including turing process of red ginseng (Panax sieving ginseng C.A. Meyer) ISO 9276-3:2008 (reconfirmed) TC 258 Project, programme and portfo- ISO 9276-6:2008 (reconfirmed) lio management ISO 13317-2:2001 (reconfirmed) ISO Project, programme and portfolio man- ISO 13317-3:2001 (reconfirmed) 21505:2017 agement — Guidance on governance D TC 28 Petroleum and related products, fuels JTC 1 Information technology and lubricants from natural or synthetic sources ISO/IEC * Information technology — Object 19514:2017 management group systems modeling H ISO 4267-2:1988 (reconfirmed) language (OMG SysML) TC 31 Tyres, rims and valves ISO/IEC TR * Information technology — Future ISO 3739-3:2008 (reconfirmed) 29181-8:2017 Network — Problem statement and re- C quirements — Part 8: Quality of Service ISO 10500:1991 (reconfirmed) ISO/IEC TR * Information technology — Future TC 38 Textiles 29181-9:2017 Network — Problem statement and D ISO 23231:2008 (reconfirmed) requirements — Part 9: Networking of everything TC 39 Machine tools ISO/IEC * Information technology — Process as- ISO 8636-1:2000 (reconfirmed) 33004:2015 sessment — Requirements for process B ISO 8636-2:2007 (reconfirmed) reference, process assessment and TC 43 Acoustics maturity models ISO 5129:2001 (reconfirmed) ISO/IEC TS * Information technology — Process as- 33030:2017 sessment — An exemplar documented E ISO 10846-3:2002 (reconfirmed) assessment process TC 46 Information and documentation ISO/IEC * Identification cards — Optical memory ISO 9707:2008 (reconfirmed) 11695-3:2017 cards — Holographic recording meth- A od — Part 3: Optical properties and TC 51 Pallets for unit load method of materi- characteristics als handling ISO/IEC * Information technology — Personal ISO 13194:2011 18013-3:2017 identification — ISO-compliant driving G licence — Part 3: Access control, au- TC 58 Gas cylinders thentication and integrity validation ISO 4706:2008 (reconfirmed) ISO/IEC TS * Information technology — Telecom- TC 67 Materials, equipment and offshore 29125:2017 munications cabling requirements for D structures for petroleum, petrochemi- remote powering of terminal equipment cal and natural gas industries ISO/IEC * Information technology — Security ISO 23936-2:2011 24759:2017 techniques — Test requirements for H cryptographic modules TC 70 Internal combustion engines ISO/IEC * Information technology — Security ISO 7967-1:2005 (reconfirmed) 27003:2017 techniques — Information security F ISO 7967-8:2005 (reconfirmed) management systems — Guidance TC 72 Textile machinery and accessories ISO/IEC * Information technology — Coding of 14496- audio-visual objects — Part 12: ISO XZ ISO 364:1983 12:2015/Amd base media file format — Amendment ISO 5240:1994 1:2017 1: DRC Extensions ISO 8116-9:1991 ISO/IEC TR * Information technology — Learning, 19788-11:2017 education and training — Metadata for G ISO 10787-1:1994 learning resources — Part 11: Migra- ISO 10787-2:1994 tion from LOM to MLR ISO 10787-3:1994 ISO 11677-1:1994 ISO 11677-2:1994 ISO 13435:2011 TC 79 Light metals and their alloys Standards confirmed ISO 6361-5:2011 TC 92 Fire safety ISO 12136:2011 The following International Standards are confimred for a five year ISO 12949:2011 period: ISO 20632:2008 (reconfirmed) ISO 24473:2008 (reconfirmed) TC 8 Ships and marine technology

ISO Update, Supplement to ISO Focus -- May 2017 15 ISO/TS ISO/TS (reconfirmed) 13447:2013 20625:2002 TC 94 Personal safety -- Protective clothing TC 162 Doors and windows and equipment ISO 8269:1985 (reconfirmed) ISO 9185:2007 (reconfirmed) TC 171 Document management applications ISO 12127-2:2007 (reconfirmed) ISO 3272-6:2000 (reconfirmed) ISO 13995:2000 (reconfirmed) ISO 6200:1999 (reconfirmed) ISO 13999-2:2003 (reconfirmed) ISO 9878:1990 (reconfirmed) TC 106 Dentistry ISO 10198:1994 (reconfirmed) ISO 22794:2007 (reconfirmed) ISO 10550:1994 (reconfirmed) TC 115 Pumps ISO 11962:2002 (reconfirmed) ISO 2858:1975 (reconfirmed) ISO 12650:1999 (reconfirmed) ISO 9905:1994 (reconfirmed) ISO 24517-1:2008 (reconfirmed) ISO 9908:1993 (reconfirmed) TC 184 Automation systems and integration TC 118 Compressors and pneumatic tools, ISO/TS (reconfirmed) machines and equipment 10303-35:2003 ISO 8573-5:2001 (reconfirmed) ISO ISO 12500-2:2007 (reconfirmed) 10303-43:2011 TC 119 Powder metallurgy ISO 10303-53:2011 ISO 13947:2011 ISO ISO 14168:2011 10303-58:2011 ISO 3325:1996 (reconfirmed) ISO ISO 4003:1977 (reconfirmed) 10303-61:2011 ISO 4507:2000 (reconfirmed) ISO 10303-110:2011 ISO 3909:1976 (reconfirmed) ISO/TS (reconfirmed) ISO 4501:1978 (reconfirmed) 10303-332:2002 ISO 4503:1978 (reconfirmed) ISO ISO 4883:1978 (reconfirmed) 10303-503:2011 TC 126 Tobacco and tobacco products ISO 10303-504:2011 ISO 12194:1995 (reconfirmed) ISO ISO 12195:1995 (reconfirmed) 10303-506:2011 TC 127 Earth-moving machinery ISO ISO 3450:2011 10303-517:2011 ISO/TS ISO 9250-1:2012 10303-520:2011 ISO/TS ISO 9250-2:2012 10303-521:2011 TC 131 Fluid power systems ISO 10303-523:2011 ISO 2944:2000 (reconfirmed) ISO/TS (reconfirmed) ISO 8778:2003 (reconfirmed) 18876-1:2003 ISO 15407-1:2000 (reconfirmed) ISO/TS (reconfirmed) ISO 3724:2007 (reconfirmed) 18876-2:2003 ISO 16860:2005 (reconfirmed) TC 190 Soil quality ISO 23181:2007 (reconfirmed) ISO 11262:2011 ISO 4392-3:1993 (reconfirmed) ISO 12404:2011 ISO 6403:1988 (reconfirmed) TC 199 Safety of machinery ISO 8426:2008 (reconfirmed) ISO 29042-1:2008 (reconfirmed) ISO 10770-1:2009 TC 202 Microbeam analysis ISO 17559:2003 (reconfirmed) ISO 22309:2011 TC 136 Furniture TC 211 Geographic information/Geomatics ISO 7173:1989 (reconfirmed) ISO 19118:2011 TC 138 Plastics pipes, fittings and valves for ISO 19141:2008 (reconfirmed) the transport of fluids ISO 19149:2011 ISO 7511:1999 (reconfirmed) ISO 19156:2011 TC 154 Processes, data elements and docu- TC 213 Dimensional and geometrical product ments in commerce, industry and specifications and verification administration ISO 2768-2:1989

16 ISO Update, Supplement to ISO Focus -- May 2017 Standards withdrawn

Period from 01 April to 30 April 2017

TC 34 Food products ISO/TS (replaced by ISO 22964:2017) 22964:2006 TC 72 Textile machinery and accessories ISO 11659-2:2004 (replaced by ) ISO 11659-3:2004 (replaced by ) TC 102 Iron ore and direct reduced iron ISO 4688-1:2006 (replaced by ISO/TR 4688-1:2017) TC 110 Industrial trucks ISO 1044:1993 (replaced by ) ISO 13562-1:2000 (replaced by ) TC 172 Optics and photonics ISO 10109-4:2001 (replaced by ISO 20711:2017) TC 182 Geotechnics ISO/TS (replaced by ISO 22476-11:2017) 22476-11:2005 JTC 1 Information technology ISO/IEC (replaced by ISO/IEC TS 33030:2017) 15504-3:2004 ISO/IEC TR (replaced by ISO/IEC TS 29125:2017) 29125:2010

Meeting calendar

The meeting calendar is available at www.iso.org/meeting-calendar.html

ISO Update, Supplement to ISO Focus -- May 2017 17