Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name 3 Minute Rinse Out Treatment

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), TETRASODIUM EDTA,CITRIC ACID,STEARTRIMONIUM CHLORIDE,BEHENTRIMONIUM METHOSULFATE,CETEARYL ALCOHOL,BUTYROSPERMUM PARKII (SHEA BUTTER),GLYCERIN,PEG-14M,POLYQUATERNIUM- 37,PROPYLENE GLYCOL DICAPRYLATE/DICAPRATE,PPG-1 TRIDECETH-6,PANTHENOL,AMODIMETHICONE,CETRIMONIUM CHLORIDE,TRIDECETH-12,CYCLOTETRASILOXANE,CYCLOPENTASILOXANE,DIMETHICONOL,HYDROLYZED WHEAT PROTEIN,HYDROLYZED CORN PROTEIN,HYDROLYZED SOY PROTEIN,PARFUM,BENZYL BENZOATE,HEXYL CINNAMAL,LINALOOL,SODIUM BENZOATE,BENZYL ALCOHOL,PHENOXYETHANOL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White cream

Colour : whte

pH value at 25oC : 5.0-7.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Dry Shampoo Cloud

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: ZEA MAYS (CORN) STARCH, ORYZA SATIVA STARCH,CETRIMONIUM CHLORIDE,MONTMORILLONITE, MAGNESIUM SULFATE, DISTEARYDIMONIUM CHLORIDE, CHLORPHENESIN, PERSEA GRATISSIMA(AVOCADO) OIL,ARGANIA SPINOSA KERNEL OIL, COCOS NUCIFERA(COCONUT) OIL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ： White powder

Colour : white

pH value at 25oC : NA

Solubility in water : yes Specific gravity at 25oC : app. 1.50±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product.

Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Frizz Control Shaping Cream

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), CETEARYL ALCOHOL,GLYCERIN,PARAFFIN ,PETROLATUM,CETEARETH-20,PROPYLENE GLYCOL,PVP,CYCLOPENTASILOXANE,PEG-75 LANOLIN,CARBOMER ,PHENOXYETHANOL,SODIUM BENZOATE,TETRASODIUM EDTA,TRIETHANOLAMINE,PARFUM,BENZYL ALCOHOL,HEXYL CINNAMAL,LIMONENE,LINALOOL,CITRONELLOL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White cream

Colour : whte

pH value at 25oC : 5.0-7.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product.

Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Hydrate My Hair Conditioner

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), CETEARYL ALCOHOL,STEARTRIMONIUM CHLORIDE,DIMETHICONOL,ISOPROPYL MYRISTATE,HYDROLYZED WHEAT PROTEIN,PERSEA GRATISSIMA (AVOCADO) OIL,HYDROLYZED CORN PROTEIN,HYDROLYZED SOY PROTEIN,HYDROLYZED WHEAT STARCH,HYDROXYETHYLCELLULOSE,GLYCERYL STEARATE,PEG-100 STEARATE,BEHENTRIMONIUM CHLORIDE,DIMETHICONE,BIS-HYDROXY/METHOXY AMODIMTHICONE,TETRASODIUM EDTA,PHENOXYETHANOL,SODIUM BENZOATE,CITRIC ACID,PARFUM,BENZYL ALCOHOL,LINALOOL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White cream

Colour : whte

pH value at 25oC : 4.0-6.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Hydrate My Hair Shampoo

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), AMMONIUM LAURETH SULFATE,COCAMIDOPROPYL BETAINE,GLYCERIN,COCAMIDE MEA,PANTHENOL,HYDROLYZED WHEAT PROTEIN,HYDROLYZED CORN PROTEIN,HYDROLYZED SOY PROTEIN,ALLANTOIN,GUAR HYDROXYPROPYLTRIMONIUM CHLORIDE,GLYCOL DISTEARATE,CETEARYL ALCOHOL,GLYCERYL LAURATE,ACRYLAMIDOPROPYLTRIMONIUM CHLORIDE/ACRYLAMIDE COPOLYMER,CARBOMER,DIMETHICONE,DIMETHICONOL,AMINOPROPYL DIMETHICONE,DISODIUM EDTA,PHENOXYETHANOL,SODIUM BENZOATE,SEA SALT,PARFUM,BENZYL ALCOHOL,HEXYL CINNAMAL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White pearl viscous liquid

Colour : whte

pH value at 25oC : 5.0-7.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name I Want Body Volume Conditioner

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), CETEARYL ALCOHOL,STEARTRIMONIUM CHLORIDE,ISOPROPYL MYRISTATE,PANTHENOL,HYDROLYZED WHEAT PROTEIN,HYDROLYZED SOY PROTEIN,PERSEA GRATISSIMA (AVOCADO) OIL,HYDROLYZED CORN PROTEIN,GUAR HYDROXYPROPYLTRIMONIUM CHLORIDE,GLYCERYL STEARATE,PEG-100 STEARATE,DISODIUM EDTA,PHENOXYETHANOL,SODIUM BENZOATE,CITRIC ACID,PARFUM,BENZYL ALCOHOL,LIMONENE,LINALOOL,GERANIOL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White cream

Colour : whte

pH value at 25oC : 4.0-6.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product.

Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Section 1 - Identification

Company Name: Eleven Australia Pty Ltd 7 Endeavour Way Sunshine West VIC 3020

Manufacture: RAUXEL PTY LTD 40 Beaumont Rd Mt Kuring-Gai 2080 Phone: (02) 9457 9330 Fax: (02) 9457 9391

Chemical nature: Water solution of surfactants and other minor ingredients. Trade Name: Ozdare Instant Body Volume Foam Other Name: Styling Product Product Use: To style the hair Creation Date: September 2015 This version issued: September 2015

Section 2 - Hazards Identification

Statement of Hazardous Nature These products are classified as: Not classified as hazardous according to the criteria of SWA. Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code. Risk Phrases: R66. Repeated exposure may cause skin dryness or cracking. Safety Phrases: S24/25. Avoid contact with skin and eyes. SUSMP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good under the ADG Code. UN Number: None allocated

Emergency Overview

Physical Description & Colour: Viscous liquids of various colours and degrees of opacity. Odour: Various fragrances. Major Health Hazards: no significant risk factors have been found for these products.

Potential Health Effects

Inhalation: Short Term Exposure: Available data indicates that these products are not harmful. In addition product is unlikely to cause any discomfort or irritation.

Skin Contact: Short Term Exposure: Available data indicates that these products are not harmful. It should present no hazards or discomfort in normal use. Eye Contact: Short Term Exposure: These products are believed to be mildly irritating, to eyes, but is unlikely to cause anything more than mild transient discomfort. Ingestion: Short Term Exposure: Significant oral exposure is considered to be unlikely. However, this product may be irritating to mucous membranes but is unlikely to cause anything more than transient discomfort. Carcinogen Status: SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.

Section 3 - Composition/Information on Ingredients

Ingredients CAS No Conc,% TWA (mg/m3) STEL (mg/m3)

Cocamidopropyl Betain 80438-79-1 <1% Certrimonium Chloride 112-02-7 <2% Other ingredients to 100%

The SWA TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.

Section 4 - First Aid Measures

General Information: You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all times. Have this SDS with you when you call. Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. Skin Contact: Irritation is unlikely. However, if irritation does occur, flush with lukewarm, gently flowing water for 5 minutes or until product is removed. Eye Contact: Immediately flush the contaminated eye(s) with lukewarm, gently flowing water until the product is removed, while holding the eyelid(s) open. Obtain medical advice immediately if irritation occurs. Take special care if exposed person is wearing contact lenses. Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor.

Section 5 - Fire Fighting Measures

Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is involved in a fire. Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Fire decomposition products from this product are likely to be harmful if inhaled. Take suitable protective measures. Extinguishing Media: Not Combustible. Use extinguishing media suited to burning materials. Fire Fighting: If a significant quantity of these products are involved in a fire, call the fire brigade. Flash point: Does not burn. Upper Flammability Limit: Does not burn. Lower Flammability Limit: Does not burn. Autoignition temperature: Not applicable - does not burn. Flammability Class: Does not burn.

Section 6 - Accidental Release Measures

Accidental release: Absorb onto suitable absorbent material like vermiculite, sand or kitty litter. Sweep up and shovel or collect recoverable product, and dispose of promptly. After sweeping up, wash area with water. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry.

Section 7 - Handling and Storage

Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this SDS for details of personal protective measures, and make sure that those measures are followed. Storage: Store in a cool, well ventilated area, out of direct sunlight. Check packaging - there may be further storage instructions on the label.

Section 8 - Exposure Controls and Personal Protection

The following Australian Standards will provide general advice regarding safety clothing and equipment: Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Occupational Protective Clothing: AS/NZS 4501 set 2008, Industrial Eye Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210. SWA Exposure Limits TWA (mg/m3) STEL (mg/m3) Exposure limits have not been established by SWA for any of the significant ingredients in this product. No special equipment is usually needed when occasionally handling small quantities. The following instructions are for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems. Ventilation: This product should only be used where there is ventilation that is adequate to keep exposure below the TWA levels. The use of exhaust fans is strongly recommended. Eye Protection: Eye protection is recommended when these products are being used. You are strongly encouraged to wear protective glasses or goggles. Skin Protection: We suggest that routine unprotected and long term contact with these products should be avoided and that suitable gloves should be worn during use. Protective Material Types: We suggest that protective clothing be made from the following materials: rubber, PVC. Respirator: Usually, no respirator is necessary when using this product.

Section 9 - Physical and Chemical Properties:

Physical Description & colour: Clear liquid Boiling Point: Approximately 100°C at 100kPa. Freezing/Melting Point: Approximately 0°C. Volatiles: Water component. Specific Gravity: 1.00 – 1.01 Water Solubility: Completely soluble in water. pH: 6.00 – 7.50 Viscosity: <500cps spindle 3, 12rpm @20c

Section 10 - Stability and Reactivity

Reactivity: These products are unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties. Conditions to Avoid: None known. Incompatibilities: No particular Incompatibilities. Fire Decomposition: Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Oxides of sulphur (sulfur dioxide is a respiratory hazard) and other sulfur compounds. Most will have a foul odour. Water. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death. Polymerisation: This product will not undergo polymerisation reactions.

Section 11 - Toxicological Information

Local Effects: Target Organs: none known Classification of Hazardous Ingredients Ingredient Risk Phrases No ingredient mentioned in the HSIS Database is present in these products at hazardous concentrations.

Section 12 - Ecological Information

This product range is biodegradable. It is not likely to accumulate in the soil or water or cause long term problems.

Section 13 - Disposal Considerations

Disposal: Small quantities as used in a salon may safely be flushed down the sink. However, if you have old or redundant stock, call your local council, or your supplier for disposal advice.

Section 14 - Transport Information

UN NUMBER: Not Applicable DANGEROUS GOODS CLASS: Not Applicable SUBSIDIARY RISK: Not Applicable PACKAGING GROUP No: Not Applicable HAZCHEM CODE: Not Applicable POISON SCHEDULE: Not Applicable

Finished packages product by ground (DOT); Non Hazardous Finished packages product by vessel (IMDG); Non Hazardous Finished packages product by air (IATA); Non Hazardous

Section 15 - Regulatory Information

AICS: All of the significant ingredients in this formulation are compliant with NICNAS regulations.

Section 16 - Other Information

This SDS contains only safety-related information. For other data see product literature. Acronyms: ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail, 7th Edition AICS Australian Inventory of Chemical Substances SWA Safe Work Australia, formerly ASCC and NOHSC CAS Number Chemical Abstracts Service Registry Number Hazchem Code Emergency action code of numbers and letters that provide information to emergency services especially firefighters IARC International Agency for Research on Cancer NOS Not otherwise specified NTP National Toxicology Program (USA) R-Phrase Risk Phrase SUSMP Standard for the Uniform Scheduling of Medicines & Poisons UN Number United Nations Number THIS SDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS SDS IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE. IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.

Please read all labels carefully before using product. This SDS is prepared in accord with the SWA document “National Code of Practice for the Preparation of Material Safety Data Sheets” 2nd Edition [NOHSC:2011(2003)]

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name I Want Body Volume Shampoo

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), AMMONIUM LAURETH SULFATE,COCAMIDOPROPYL BETAINE,GLYCERIN,COCAMIDE MEA,PANTHENOL,HYDROLYZED WHEAT PROTEIN,HYDROLYZED SOY PROTEIN,HYDROLYZED CORN PROTEIN,ALLANTOIN,GUAR HYDROXYPROPYLTRIMONIUM CHLORIDE,GLYCOL DISTEARATE,CETEARYL ALCOHOL,GLYCERYL LAURATE,ACRYLAMIDOPROPYLTRIMONIUM CHLORIDE/ACRYLAMIDE COPOLYMER,CARBOMER,DIMETHICONE,DIMETHICONOL,AMINOPROPYL DIMETHICONE,DISODIUM EDTA,PHENOXYETHANOL,SODIUM BENZOATE,SEA SALT,PARFUM,BENZYL ALCOHOL,LIMONENE,LINALOOL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White pearl viscous liquid

Colour : whte

pH value at 25oC : 5.0-7.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Section 1 - Identification

Company Name: Eleven Australia Pty Ltd 7 Endeavour Way Sunshine West VIC 3020

Manufacture: RAUXEL PTY LTD 40 Beaumont Rd Mt Kuring-Gai 2080 Phone: (02) 9457 9330 Fax: (02) 9457 9391

Chemical nature: Water solution of surfactants and other minor ingredients. Trade Name: Ozdare Blonde Shampoo Other Name: Shampoo Product Use: To cleanse the hair Creation Date: April 2016 This version issued: April 2016

Section 2 - Hazards Identification

Statement of Hazardous Nature These products are classified as: Not classified as hazardous according to the criteria of SWA. Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code. Risk Phrases: R66. Repeated exposure may cause skin dryness or cracking. Safety Phrases: S24/25. Avoid contact with skin and eyes. SUSMP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good under the ADG Code. UN Number: None allocated

Emergency Overview

Physical Description & Colour: Viscous liquids of various colours and degrees of opacity. Odour: Various fragrances. Major Health Hazards: no significant risk factors have been found for these products.

Potential Health Effects

Inhalation: Short Term Exposure: Available data indicates that these products are not harmful. In addition product is unlikely to cause any discomfort or irritation.

Skin Contact: Short Term Exposure: Available data indicates that these products are not harmful. It should present no hazards or discomfort in normal use. Eye Contact: Short Term Exposure: These products are believed to be mildly irritating, to eyes, but is unlikely to cause anything more than mild transient discomfort. Ingestion: Short Term Exposure: Significant oral exposure is considered to be unlikely. However, this product may be irritating to mucous membranes but is unlikely to cause anything more than transient discomfort. Carcinogen Status: SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.

Section 3 - Composition/Information on Ingredients

Ingredients CAS No Conc,% TWA (mg/m3) STEL (mg/m3)

Sodium Lauryl Sulphate 151-21-3 <10 Cocamido Propyl Betain 80438-79-1 <10 Other ingredients to 100

The SWA TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.

Section 4 - First Aid Measures

General Information: You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all times. Have this SDS with you when you call. Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. Skin Contact: Irritation is unlikely. However, if irritation does occur, flush with lukewarm, gently flowing water for 5 minutes or until product is removed. Eye Contact: Immediately flush the contaminated eye(s) with lukewarm, gently flowing water until the product is removed, while holding the eyelid(s) open. Obtain medical advice immediately if irritation occurs. Take special care if exposed person is wearing contact lenses. Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor.

Section 5 - Fire Fighting Measures

Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is involved in a fire. Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Fire decomposition products from this product are likely to be harmful if inhaled. Take suitable protective measures. Extinguishing Media: Not Combustible. Use extinguishing media suited to burning materials. Fire Fighting: If a significant quantity of these products are involved in a fire, call the fire brigade. Flash point: Does not burn. Upper Flammability Limit: Does not burn. Lower Flammability Limit: Does not burn. Autoignition temperature: Not applicable - does not burn. Flammability Class: Does not burn.

Section 6 - Accidental Release Measures

Accidental release: Absorb onto suitable absorbent material like vermiculite, sand or kitty litter. Sweep up and shovel or collect recoverable product, and dispose of promptly. After sweeping up, wash area with water. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry.

Section 7 - Handling and Storage

Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this SDS for details of personal protective measures, and make sure that those measures are followed. Storage: Store in a cool, well ventilated area, out of direct sunlight. Check packaging - there may be further storage instructions on the label.

Section 8 - Exposure Controls and Personal Protection

The following Australian Standards will provide general advice regarding safety clothing and equipment: Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Occupational Protective Clothing: AS/NZS 4501 set 2008, Industrial Eye Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210. SWA Exposure Limits TWA (mg/m3) STEL (mg/m3) Exposure limits have not been established by SWA for any of the significant ingredients in this product. No special equipment is usually needed when occasionally handling small quantities. The following instructions are for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems. Ventilation: This product should only be used where there is ventilation that is adequate to keep exposure below the TWA levels. The use of exhaust fans is strongly recommended. Eye Protection: Eye protection is recommended when these products are being used. You are strongly encouraged to wear protective glasses or goggles. Skin Protection: We suggest that routine unprotected and long term contact with these products should be avoided and that suitable gloves should be worn during use. Protective Material Types: We suggest that protective clothing be made from the following materials: rubber, PVC. Respirator: Usually, no respirator is necessary when using this product.

Section 9 - Physical and Chemical Properties:

Physical Description & colour: White opaque liquid Boiling Point: Approximately 100°C at 100kPa. Freezing/Melting Point: Approximately 0°C. Volatiles: Water component. Specific Gravity: 1.01 – 1.03 Water Solubility: Completely soluble in water. pH: 5.50 – 6.50 Viscosity: Varies from product to product.

Section 10 - Stability and Reactivity

Reactivity: These products are unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties. Conditions to Avoid: None known. Incompatibilities: No particular Incompatibilities. Fire Decomposition: Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Oxides of sulphur (sulfur dioxide is a respiratory hazard) and other sulfur compounds. Most will have a foul odour. Water. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death. Polymerisation: This product will not undergo polymerisation reactions.

Section 11 - Toxicological Information

Local Effects: Target Organs: none known Classification of Hazardous Ingredients Ingredient Risk Phrases No ingredient mentioned in the HSIS Database is present in these products at hazardous concentrations.

Section 12 - Ecological Information

This product range is biodegradable. It is not likely to accumulate in the soil or water or cause long term problems.

Section 13 - Disposal Considerations

Disposal: Small quantities as used in a salon may safely be flushed down the sink. However, if you have old or redundant stock, call your local council, or your supplier for disposal advice.

Section 14 - Transport Information

UN NUMBER: Not Applicable DANGEROUS GOODS CLASS: Not Applicable SUBSIDIARY RISK: Not Applicable PACKAGING GROUP No: Not Applicable HAZCHEM CODE: Not Applicable POISON SCHEDULE: Not Applicable Finished packages product by ground (DOT); Non Hazardous Finished packages product by vessel (IMDG); Non Hazardous Finished packages product by air (IATA); Non Hazardous

Section 15 - Regulatory Information

AICS: All of the significant ingredients in this formulation are compliant with NICNAS regulations.

Section 16 - Other Information

This SDS contains only safety-related information. For other data see product literature. Acronyms: ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail, 7th Edition AICS Australian Inventory of Chemical Substances SWA Safe Work Australia, formerly ASCC and NOHSC CAS Number Chemical Abstracts Service Registry Number Hazchem Code Emergency action code of numbers and letters that provide information to emergency services especially firefighters IARC International Agency for Research on Cancer NOS Not otherwise specified NTP National Toxicology Program (USA) R-Phrase Risk Phrase SUSMP Standard for the Uniform Scheduling of Medicines & Poisons UN Number United Nations Number THIS SDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS SDS IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE. IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.

Please read all labels carefully before using product. This SDS is prepared in accord with the SWA document “National Code of Practice for the Preparation of Material Safety Data Sheets” 2nd Edition [NOHSC:2011(2003)]

Section 1 - Identification

Company Name: Eleven Australia Pty Ltd 7 Endeavour Way Sunshine West VIC 3020

Manufacture: RAUXEL PTY LTD 40 Beaumont Rd Mt Kuring-Gai 2080 Phone: (02) 9457 9330 Fax: (02) 9457 9391

Chemical nature: Water solution of surfactants and other minor ingredients. Trade Name: Ozdare Keep me Blonde Treatment Other Name: Treatment Product Use: To condition and beautify hair after cleansing, or before or after other hair treatments. Creation Date: September 2015 This version issued: September 2015

Section 2 - Hazards Identification

Statement of Hazardous Nature These products are classified as: Not classified as hazardous according to the criteria of SWA. Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code. Risk Phrases: R66. Repeated exposure may cause skin dryness or cracking. Safety Phrases: S24/25. Avoid contact with skin and eyes. SUSMP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good under the ADG Code. UN Number: None allocated

Emergency Overview

Physical Description & Colour: Viscous liquids of various colours and degrees of opacity. Odour: Various fragrances. Major Health Hazards: no significant risk factors have been found for these products.

Potential Health Effects

Inhalation: Short Term Exposure: Available data indicates that these products are not harmful. In addition product is unlikely to cause any discomfort or irritation.

Skin Contact: Short Term Exposure: Available data indicates that these products are not harmful. It should present no hazards or discomfort in normal use. Eye Contact: Short Term Exposure: These products are believed to be mildly irritating, to eyes, but is unlikely to cause anything more than mild transient discomfort. Ingestion: Short Term Exposure: Significant oral exposure is considered to be unlikely. However, this product may be irritating to mucous membranes but is unlikely to cause anything more than transient discomfort. Carcinogen Status: SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.

Section 3 - Composition/Information on Ingredients

Ingredients CAS No Conc,% TWA (mg/m3) STEL (mg/m3)

Certrimonium Chloride 112-02-7 <2.5 Behentrimonium Chloride 17301-53-0 <1.50 Isopropyl Myristate 110-27-0 <2.00 Other ingredients to 100

The SWA TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.

Section 4 - First Aid Measures

General Information: You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all times. Have this SDS with you when you call. Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. Skin Contact: Irritation is unlikely. However, if irritation does occur, flush with lukewarm, gently flowing water for 5 minutes or until product is removed. Eye Contact: Immediately flush the contaminated eye(s) with lukewarm, gently flowing water until the product is removed, while holding the eyelid(s) open. Obtain medical advice immediately if irritation occurs. Take special care if exposed person is wearing contact lenses. Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor.

Section 5 - Fire Fighting Measures

Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is involved in a fire. Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Fire decomposition products from this product are likely to be harmful if inhaled. Take suitable protective measures. Extinguishing Media: Not Combustible. Use extinguishing media suited to burning materials. Fire Fighting: If a significant quantity of these products are involved in a fire, call the fire brigade. Flash point: Does not burn. Upper Flammability Limit: Does not burn. Lower Flammability Limit: Does not burn. Autoignition temperature: Not applicable - does not burn. Flammability Class: Does not burn.

Section 6 - Accidental Release Measures

Accidental release: Absorb onto suitable absorbent material like vermiculite, sand or kitty litter. Sweep up and shovel or collect recoverable product, and dispose of promptly. After sweeping up, wash area with water. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry.

Section 7 - Handling and Storage

Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this SDS for details of personal protective measures, and make sure that those measures are followed. Storage: Store in a cool, well ventilated area, out of direct sunlight. Check packaging - there may be further storage instructions on the label.

Section 8 - Exposure Controls and Personal Protection

The following Australian Standards will provide general advice regarding safety clothing and equipment: Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Occupational Protective Clothing: AS/NZS 4501 set 2008, Industrial Eye Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210. SWA Exposure Limits TWA (mg/m3) STEL (mg/m3) Exposure limits have not been established by SWA for any of the significant ingredients in this product. No special equipment is usually needed when occasionally handling small quantities. The following instructions are for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems. Ventilation: This product should only be used where there is ventilation that is adequate to keep exposure below the TWA levels. The use of exhaust fans is strongly recommended. Eye Protection: Eye protection is recommended when these products are being used. You are strongly encouraged to wear protective glasses or goggles. Skin Protection: We suggest that routine unprotected and long term contact with these products should be avoided and that suitable gloves should be worn during use. Protective Material Types: We suggest that protective clothing be made from the following materials: rubber, PVC. Respirator: Usually, no respirator is necessary when using this product.

Section 9 - Physical and Chemical Properties:

Physical Description & colour: Purple opaque liquid Boiling Point: Approximately 100°C at 100kPa. Freezing/Melting Point: Approximately 0°C. Volatiles: Water component. Specific Gravity: 0.95 – 1.00 Water Solubility: Completely soluble in water. pH: 3.00 – 4.50 Viscosity: Varies from product to product.

Section 10 - Stability and Reactivity

Reactivity: These products are unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties. Conditions to Avoid: None known. Incompatibilities: No particular Incompatibilities. Fire Decomposition: Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Oxides of sulphur (sulfur dioxide is a respiratory hazard) and other sulfur compounds. Most will have a foul odour. Water. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death. Polymerisation: This product will not undergo polymerisation reactions.

Section 11 - Toxicological Information

Local Effects: Target Organs: none known Classification of Hazardous Ingredients Ingredient Risk Phrases No ingredient mentioned in the HSIS Database is present in these products at hazardous concentrations.

Section 12 - Ecological Information

This product range is biodegradable. It is not likely to accumulate in the soil or water or cause long term problems.

Section 13 - Disposal Considerations

Disposal: Small quantities as used in a salon may safely be flushed down the sink. However, if you have old or redundant stock, call your local council, or your supplier for disposal advice.

Section 14 - Transport Information

UN NUMBER: Not Applicable DANGEROUS GOODS CLASS: Not Applicable SUBSIDIARY RISK: Not Applicable PACKAGING GROUP No: Not Applicable HAZCHEM CODE: Not Applicable POISON SCHEDULE: Not Applicable

Finished packages product by ground (DOT); Non Hazardous Finished packages product by vessel (IMDG); Non Hazardous Finished packages product by air (IATA); Non Hazardous

Section 15 - Regulatory Information

AICS: All of the significant ingredients in this formulation are compliant with NICNAS regulations.

Section 16 - Other Information

This SDS contains only safety-related information. For other data see product literature. Acronyms: ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail, 7th Edition AICS Australian Inventory of Chemical Substances SWA Safe Work Australia, formerly ASCC and NOHSC CAS Number Chemical Abstracts Service Registry Number Hazchem Code Emergency action code of numbers and letters that provide information to emergency services especially firefighters IARC International Agency for Research on Cancer NOS Not otherwise specified NTP National Toxicology Program (USA) R-Phrase Risk Phrase SUSMP Standard for the Uniform Scheduling of Medicines & Poisons UN Number United Nations Number THIS SDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS SDS IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE. IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.

Please read all labels carefully before using product. This SDS is prepared in accord with the SWA document “National Code of Practice for the Preparation of Material Safety Data Sheets” 2nd Edition [NOHSC:2011(2003)]

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Ozdare Keep My Curl Defining Cream

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), TETRASODIUM EDTA,BENZOPHENONE-4,C12-C13 ALKYL LACTATE,GLYCERYL STEARATE,PEG-100 STEARATE,CETRIMONIUM CHLORIDE,CETEARYL ALCOHOL,CETEARETH-20,ACRYLAMIDOPROPYLTRIMONIUM CHLORIDE/ACRYLAMIDE COPOLYMER,CYCLOPENTASILOXANE,PANTHENOL,CETEARYL ALCOHOL,CETEARETH-20,SODIUM HYDROXIDE, PERSEA GRATISSIMA (AVOCADO) OIL,PHENOXYETHANOL,SODIUM BENZOATE,BENZYL ALCOHOL,PARFUM,HYDROLYZED WHEAT PROTEIN,HYDROLYZED CORN PROTEIN,HYDROLYZED SOY PROTEIN, BENZYL BENZOATE,HEXYL CINNAMAL,LINALOOL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White cream

Colour : whte

pH value at 25oC : 5.0-7.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Section 1 - Identification

Company Name: Eleven Australia Pty Ltd 7 Endeavour Way Sunshine West VIC 3020

Manufacture: RAUXEL PTY LTD 40 Beaumont Rd Mt Kuring-Gai 2080 Phone: (02) 9457 9330 Fax: (02) 9457 9391

Chemical nature: Water solution of surfactants and other minor ingredients. Trade Name: Ozdare Keep My Curl Defining Cream Other Name: Styling Product Product Use: To condition and style the hair Creation Date: September 2015 This version issued: September 2015

Section 2 - Hazards Identification

Statement of Hazardous Nature These products are classified as: Not classified as hazardous according to the criteria of SWA. Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code. Risk Phrases: R66. Repeated exposure may cause skin dryness or cracking. Safety Phrases: S24/25. Avoid contact with skin and eyes. SUSMP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good under the ADG Code. UN Number: None allocated

Emergency Overview

Physical Description & Colour: Viscous liquids of various colours and degrees of opacity. Odour: Various fragrances. Major Health Hazards: no significant risk factors have been found for these products.

Potential Health Effects

Inhalation: Short Term Exposure: Available data indicates that these products are not harmful. In addition product is unlikely to cause any discomfort or irritation.

Skin Contact: Short Term Exposure: Available data indicates that these products are not harmful. It should present no hazards or discomfort in normal use. Eye Contact: Short Term Exposure: These products are believed to be mildly irritating, to eyes, but is unlikely to cause anything more than mild transient discomfort. Ingestion: Short Term Exposure: Significant oral exposure is considered to be unlikely. However, this product may be irritating to mucous membranes but is unlikely to cause anything more than transient discomfort. Carcinogen Status: SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.

Section 3 - Composition/Information on Ingredients

Ingredients CAS No Conc,% TWA (mg/m3) STEL (mg/m3)

Certrimonium Chloride 112-02-7 <1.00 Cyclomethicone 69430-24-6 <10.00 Other ingredients to 100

The SWA TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.

Section 4 - First Aid Measures

General Information: You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all times. Have this SDS with you when you call. Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. Skin Contact: Irritation is unlikely. However, if irritation does occur, flush with lukewarm, gently flowing water for 5 minutes or until product is removed. Eye Contact: Immediately flush the contaminated eye(s) with lukewarm, gently flowing water until the product is removed, while holding the eyelid(s) open. Obtain medical advice immediately if irritation occurs. Take special care if exposed person is wearing contact lenses. Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor.

Section 5 - Fire Fighting Measures

Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is involved in a fire. Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Fire decomposition products from this product are likely to be harmful if inhaled. Take suitable protective measures. Extinguishing Media: Not Combustible. Use extinguishing media suited to burning materials. Fire Fighting: If a significant quantity of these products are involved in a fire, call the fire brigade. Flash point: Does not burn. Upper Flammability Limit: Does not burn. Lower Flammability Limit: Does not burn. Autoignition temperature: Not applicable - does not burn. Flammability Class: Does not burn.

Section 6 - Accidental Release Measures

Accidental release: Absorb onto suitable absorbent material like vermiculite, sand or kitty litter. Sweep up and shovel or collect recoverable product, and dispose of promptly. After sweeping up, wash area with water. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry.

Section 7 - Handling and Storage

Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this SDS for details of personal protective measures, and make sure that those measures are followed. Storage: Store in a cool, well ventilated area, out of direct sunlight. Check packaging - there may be further storage instructions on the label.

Section 8 - Exposure Controls and Personal Protection

The following Australian Standards will provide general advice regarding safety clothing and equipment: Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Occupational Protective Clothing: AS/NZS 4501 set 2008, Industrial Eye Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210. SWA Exposure Limits TWA (mg/m3) STEL (mg/m3) Exposure limits have not been established by SWA for any of the significant ingredients in this product. No special equipment is usually needed when occasionally handling small quantities. The following instructions are for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems. Ventilation: This product should only be used where there is ventilation that is adequate to keep exposure below the TWA levels. The use of exhaust fans is strongly recommended. Eye Protection: Eye protection is recommended when these products are being used. You are strongly encouraged to wear protective glasses or goggles. Skin Protection: We suggest that routine unprotected and long term contact with these products should be avoided and that suitable gloves should be worn during use. Protective Material Types: We suggest that protective clothing be made from the following materials: rubber, PVC. Respirator: Usually, no respirator is necessary when using this product.

Section 9 - Physical and Chemical Properties:

Physical Description & colour: White opaque liquid Boiling Point: Approximately 100°C at 100kPa. Freezing/Melting Point: Approximately 0°C. Volatiles: Water component. Specific Gravity: 0.95 – 1.00 Water Solubility: Completely soluble in water. pH: 5.00 – 7.50 Viscosity: Varies from product to product.

Section 10 - Stability and Reactivity

Reactivity: These products are unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties. Conditions to Avoid: None known. Incompatibilities: No particular Incompatibilities. Fire Decomposition: Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Oxides of sulphur (sulfur dioxide is a respiratory hazard) and other sulfur compounds. Most will have a foul odour. Water. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death. Polymerisation: This product will not undergo polymerisation reactions.

Section 11 - Toxicological Information

Local Effects: Target Organs: none known Classification of Hazardous Ingredients Ingredient Risk Phrases No ingredient mentioned in the HSIS Database is present in these products at hazardous concentrations.

Section 12 - Ecological Information

This product range is biodegradable. It is not likely to accumulate in the soil or water or cause long term problems.

Section 13 - Disposal Considerations

Disposal: Small quantities as used in a salon may safely be flushed down the sink. However, if you have old or redundant stock, call your local council, or your supplier for disposal advice.

Section 14 - Transport Information

UN NUMBER: Not Applicable DANGEROUS GOODS CLASS: Not Applicable SUBSIDIARY RISK: Not Applicable PACKAGING GROUP No: Not Applicable HAZCHEM CODE: Not Applicable POISON SCHEDULE: Not Applicable

Finished packages product by ground (DOT); Non Hazardous Finished packages product by vessel (IMDG); Non Hazardous Finished packages product by air (IATA); Non Hazardous

Section 15 - Regulatory Information

AICS: All of the significant ingredients in this formulation are compliant with NICNAS regulations.

Section 16 - Other Information

This SDS contains only safety-related information. For other data see product literature. Acronyms: ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail, 7th Edition AICS Australian Inventory of Chemical Substances SWA Safe Work Australia, formerly ASCC and NOHSC CAS Number Chemical Abstracts Service Registry Number Hazchem Code Emergency action code of numbers and letters that provide information to emergency services especially firefighters IARC International Agency for Research on Cancer NOS Not otherwise specified NTP National Toxicology Program (USA) R-Phrase Risk Phrase SUSMP Standard for the Uniform Scheduling of Medicines & Poisons UN Number United Nations Number THIS SDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS SDS IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE. IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.

Please read all labels carefully before using product. This SDS is prepared in accord with the SWA document “National Code of Practice for the Preparation of Material Safety Data Sheets” 2nd Edition [NOHSC:2011(2003)]

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Medium Hold Styling Cream

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), TETRASODIUM EDTA,PVP,VP/VA COPOLYMER,ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER,PETROLATUM,CETEARYL ALCOHOL,HYDROGENATED SUNFLOWER SEED OIL,PEG-7 GLYCERYL COCOATE ,MINERAL OIL ,OLETH-20,LANOLIN WAX,COPERNICIA CERIFERA (CARNAUBA) WAX,TRIETHANOLAMINE,PHENOXYETHANOL,SODIUM BENZOATE,BENZYL ALCOHOL, FRAGRANCE,RICINUS COMMUNIS (CASTOR) SEED OIL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White cream

Colour : whte

pH value at 25oC : 5.0-7.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product.

Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Section 1 - Identification

Company Name: Eleven Australia Pty Ltd 7 Endeavour Way Sunshine West VIC 3020

Manufacture: RAUXEL PTY LTD 40 Beaumont Rd Mt Kuring-Gai 2080 Phone: (02) 9457 9330 Fax: (02) 9457 9391

Chemical nature: Water solution of surfactants and other minor ingredients. Trade Name: Ozdare Eleven Miracle Treatment Other Name: Treatment Product Use: To condition and beautify hair after cleansing, or before or after other hair treatments. Creation Date: September 2015 This version issued: September 2015

Section 2 - Hazards Identification

Statement of Hazardous Nature These products are classified as: Not classified as hazardous according to the criteria of SWA. Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code. Risk Phrases: R66. Repeated exposure may cause skin dryness or cracking. Safety Phrases: S24/25. Avoid contact with skin and eyes. SUSMP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good under the ADG Code. UN Number: None allocated

Emergency Overview

Physical Description & Colour: Viscous liquids of various colours and degrees of opacity. Odour: Various fragrances. Major Health Hazards: no significant risk factors have been found for these products.

Potential Health Effects

Inhalation: Short Term Exposure: Available data indicates that these products are not harmful. In addition product is unlikely to cause any discomfort or irritation.

Skin Contact: Short Term Exposure: Available data indicates that these products are not harmful. It should present no hazards or discomfort in normal use. Eye Contact: Short Term Exposure: These products are believed to be mildly irritating, to eyes, but is unlikely to cause anything more than mild transient discomfort. Ingestion: Short Term Exposure: Significant oral exposure is considered to be unlikely. However, this product may be irritating to mucous membranes but is unlikely to cause anything more than transient discomfort. Carcinogen Status: SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.

Section 3 - Composition/Information on Ingredients

Ingredients CAS No Conc,% TWA (mg/m3) STEL (mg/m3)

Behentrimonium Chloride 17301-53-0 <1.50 Cyclomethicone 69430-24-6 <2.50 Isopropyl Myristate 110-27-0 <2.00 Other ingredients to 100

The SWA TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.

Section 4 - First Aid Measures

General Information: You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all times. Have this SDS with you when you call. Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. Skin Contact: Irritation is unlikely. However, if irritation does occur, flush with lukewarm, gently flowing water for 5 minutes or until product is removed. Eye Contact: Immediately flush the contaminated eye(s) with lukewarm, gently flowing water until the product is removed, while holding the eyelid(s) open. Obtain medical advice immediately if irritation occurs. Take special care if exposed person is wearing contact lenses. Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor.

Section 5 - Fire Fighting Measures

Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is involved in a fire. Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Fire decomposition products from this product are likely to be harmful if inhaled. Take suitable protective measures. Extinguishing Media: Not Combustible. Use extinguishing media suited to burning materials. Fire Fighting: If a significant quantity of these products are involved in a fire, call the fire brigade. Flash point: Does not burn. Upper Flammability Limit: Does not burn. Lower Flammability Limit: Does not burn. Autoignition temperature: Not applicable - does not burn. Flammability Class: Does not burn.

Section 6 - Accidental Release Measures

Accidental release: Absorb onto suitable absorbent material like vermiculite, sand or kitty litter. Sweep up and shovel or collect recoverable product, and dispose of promptly. After sweeping up, wash area with water. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry.

Section 7 - Handling and Storage

Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this SDS for details of personal protective measures, and make sure that those measures are followed. Storage: Store in a cool, well ventilated area, out of direct sunlight. Check packaging - there may be further storage instructions on the label.

Section 8 - Exposure Controls and Personal Protection

The following Australian Standards will provide general advice regarding safety clothing and equipment: Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Occupational Protective Clothing: AS/NZS 4501 set 2008, Industrial Eye Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210. SWA Exposure Limits TWA (mg/m3) STEL (mg/m3) Exposure limits have not been established by SWA for any of the significant ingredients in this product. No special equipment is usually needed when occasionally handling small quantities. The following instructions are for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems. Ventilation: This product should only be used where there is ventilation that is adequate to keep exposure below the TWA levels. The use of exhaust fans is strongly recommended. Eye Protection: Eye protection is recommended when these products are being used. You are strongly encouraged to wear protective glasses or goggles. Skin Protection: We suggest that routine unprotected and long term contact with these products should be avoided and that suitable gloves should be worn during use. Protective Material Types: We suggest that protective clothing be made from the following materials: rubber, PVC. Respirator: Usually, no respirator is necessary when using this product.

Section 9 - Physical and Chemical Properties:

Physical Description & colour: white opaque liquid Boiling Point: Approximately 100°C at 100kPa. Freezing/Melting Point: Approximately 0°C. Volatiles: Water component. Specific Gravity: 0.95 – 1.00 Water Solubility: Completely soluble in water. pH: 3.00 – 4.50 Viscosity: Varies from product to product.

Section 10 - Stability and Reactivity

Reactivity: These products are unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties. Conditions to Avoid: None known. Incompatibilities: No particular Incompatibilities. Fire Decomposition: Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Oxides of sulphur (sulfur dioxide is a respiratory hazard) and other sulfur compounds. Most will have a foul odour. Water. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death. Polymerisation: This product will not undergo polymerisation reactions.

Section 11 - Toxicological Information

Local Effects: Target Organs: none known Classification of Hazardous Ingredients Ingredient Risk Phrases No ingredient mentioned in the HSIS Database is present in these products at hazardous concentrations.

Section 12 - Ecological Information

This product range is biodegradable. It is not likely to accumulate in the soil or water or cause long term problems.

Section 13 - Disposal Considerations

Disposal: Small quantities as used in a salon may safely be flushed down the sink. However, if you have old or redundant stock, call your local council, or your supplier for disposal advice.

Section 14 - Transport Information

UN NUMBER: Not Applicable DANGEROUS GOODS CLASS: Not Applicable SUBSIDIARY RISK: Not Applicable PACKAGING GROUP No: Not Applicable HAZCHEM CODE: Not Applicable POISON SCHEDULE: Not Applicable

Finished packages product by ground (DOT); Non Hazardous Finished packages product by vessel (IMDG); Non Hazardous Finished packages product by air (IATA); Non Hazardous

Section 15 - Regulatory Information

AICS: All of the significant ingredients in this formulation are compliant with NICNAS regulations.

Section 16 - Other Information

This SDS contains only safety-related information. For other data see product literature. Acronyms: ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail, 7th Edition AICS Australian Inventory of Chemical Substances SWA Safe Work Australia, formerly ASCC and NOHSC CAS Number Chemical Abstracts Service Registry Number Hazchem Code Emergency action code of numbers and letters that provide information to emergency services especially firefighters IARC International Agency for Research on Cancer NOS Not otherwise specified NTP National Toxicology Program (USA) R-Phrase Risk Phrase SUSMP Standard for the Uniform Scheduling of Medicines & Poisons UN Number United Nations Number THIS SDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS SDS IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE. IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.

Please read all labels carefully before using product. This SDS is prepared in accord with the SWA document “National Code of Practice for the Preparation of Material Safety Data Sheets” 2nd Edition [NOHSC:2011(2003)]

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Sea Salt Spray

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), TETRASODIUM EDTA,VP/VA COPOLYMER,PVP,ALCOHOL,MAGNESIUM SULFATE,MAGNESIUM CLORIDE,POTASSIUM CLORIDE,SODIUM CHLORIDE,CALCIUM CLORIDE,SODIUM HYDROXIDE,PHENOXYETHANOL,SODIUM BENZOATE,BENZYL ALCOHOL,HYDROLYZED WHEAT PROTEIN,HYDROLYZED CORN PROTEIN,HYDROLYZED SOY PROTEIN,CI 19140,CI 16035,COCAMIDOPROPYL BETAINE,PEG-40 HYDROGENATED CASTOR OIL,PARFUM,BENZYL BENZOATE,HEXYL CINNAMAL,LINALOOL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ： Pale yellowish clear liquid

Colour : Pale yellowish

pH value at 25oC : 5.0-7.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Smooth & Shine Anti Frizz Serum

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: CYCLOPENTASILOXANE,DIMETHICONOL,CYCLOTETRASILOXANE,DEMETHICONE,ARGANIA SPINOSA KERNEL OIL,ISOPROPYL MYRISTATE,PARFUM,BENZYL BENZOATE,HEXYL CINNAMAL,LINALOOL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ： colorless clear liquid

Colour : colorless clear

pH value at 25oC : NA

Solubility in water : yes Specific gravity at 25oC : app. 0.90±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product.

Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Smooth Me Now Conditioner

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), CETEARYL ALCOHOL，STEARTRIMONIUM CHLORIDE，ISOPROPYL MYRISTATE，ISODODECANE，PANTHENOL ，HYDROLYZED WHEAT PROTEIN，PERSEA GRATISSIMA (AVOCADO) OIL，HYDROLYZED SOY PROTEIN，HYDROLYZED CORN PROTEIN，HYDROLYZED WHEAT STARCH，GLYCERYL STEARATE，PEG-100 STEARATE，DIMETHICONE，DIMETHICONOL， AMINOPROPYL DIMETHICONE，TRIDECETH-12，CETRIMONIUM CHLORIDE，TETRASODIUM EDTA，PHENOXYETHANOL，SODIUM BENZOATE，PARFUM，BENZYL ALCOHOL，COUMARIN，BENZYL SALICYLATE，BENZYL BENZOATE，BUTYLPHENYL METHYLPROPIONAL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White cream

Colour : whte

pH value at 25oC : 4.0-6.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Smooth Me Now Shampoo

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center. Europe: **************

Date August 6th, 2018

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), AMMONIUM LAURETH SULFATE，AMMONIUM LAURYL SULFATE，COCAMIDOPROPYL BETAINE，GLYCOL DISTEARATE，GLYCERIN，COCAMIDE MEA，PANTHENOL，HYDROLYZED SOY PROTEIN， GLYCOLIC ACID，GUAR HYDROXYPROPYLTRIMONIUM CHLORIDE，SODIUM LAUROYL SARCOSINATE， GLYCERYL LAURATE，SODIUM LAUROYL GLUTAMATE，ACRYLAMIDOPROPYLTRIMONIUM CHLORIDE/ACRYLAMIDE COPOLYMER，PEG-12 DIMETHICONE，DISODIUM EDTA，PHENOXYETHANOL， POTASSIUM SORBATE，AMMONIUM CHLORIDE，PARFUM，BENZYL ALCOHOL，BENZYL SALICYLATE， COUMARIN，BENZYL BENZOATE，BUTYLPHENYL METHYLPROPIONAL

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or

cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance ：White pearl viscous liquid

Colour : whte

pH value at 25oC : 5.0-7.0

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available.

Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and

is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Section 1 - Identification

Company Name: Eleven Australia Pty Ltd 7 Endeavour Way Sunshine West VIC 3020

Manufacture: RAUXEL PTY LTD 40 Beaumont Rd Mt Kuring-Gai 2080 Phone: (02) 9457 9330 Fax: (02) 9457 9391

Chemical nature: Water solution of surfactants and other minor ingredients. Trade Name: Ozdare Deep Cleanse Shampoo Other Name: Shampoo Product Use: To cleanse the hair Creation Date: May 2018 This version issued: May 2018

Section 2 - Hazards Identification

Statement of Hazardous Nature These products are classified as: Not classified as hazardous according to the criteria of SWA. Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code. Risk Phrases: R66. Repeated exposure may cause skin dryness or cracking. Safety Phrases: S24/25. Avoid contact with skin and eyes. SUSMP Classification: None allocated. ADG Classification: None allocated. Not a Dangerous Good under the ADG Code. UN Number: None allocated

Emergency Overview

Physical Description & Colour: Viscous liquids of various colours and degrees of opacity. Odour: Various fragrances. Major Health Hazards: no significant risk factors have been found for these products.

Potential Health Effects

Inhalation: Short Term Exposure: Available data indicates that these products are not harmful. In addition product is unlikely to cause any discomfort or irritation.

Skin Contact: Short Term Exposure: Available data indicates that these products are not harmful. It should present no hazards or discomfort in normal use. Eye Contact: Short Term Exposure: These products are believed to be mildly irritating, to eyes, but is unlikely to cause anything more than mild transient discomfort. Ingestion: Short Term Exposure: Significant oral exposure is considered to be unlikely. However, this product may be irritating to mucous membranes but is unlikely to cause anything more than transient discomfort. Carcinogen Status: SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.

Section 3 - Composition/Information on Ingredients

Ingredients CAS No Conc,% TWA (mg/m3) STEL (mg/m3)

Sodium Lauryl Sulphate 151-21-3 <15 Cocamido Propyl Betain 80438-79-1 <10 Other ingredients to 100

The SWA TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.

Section 4 - First Aid Measures

General Information: You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all times. Have this SDS with you when you call. Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. Skin Contact: Irritation is unlikely. However, if irritation does occur, flush with lukewarm, gently flowing water for 5 minutes or until product is removed. Eye Contact: Immediately flush the contaminated eye(s) with lukewarm, gently flowing water until the product is removed, while holding the eyelid(s) open. Obtain medical advice immediately if irritation occurs. Take special care if exposed person is wearing contact lenses. Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor.

Section 5 - Fire Fighting Measures

Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is involved in a fire. Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Fire decomposition products from this product are likely to be harmful if inhaled. Take suitable protective measures. Extinguishing Media: Not Combustible. Use extinguishing media suited to burning materials. Fire Fighting: If a significant quantity of these products are involved in a fire, call the fire brigade. Flash point: Does not burn. Upper Flammability Limit: Does not burn. Lower Flammability Limit: Does not burn. Autoignition temperature: Not applicable - does not burn. Flammability Class: Does not burn.

Section 6 - Accidental Release Measures

Accidental release: Absorb onto suitable absorbent material like vermiculite, sand or kitty litter. Sweep up and shovel or collect recoverable product, and dispose of promptly. After sweeping up, wash area with water. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry.

Section 7 - Handling and Storage

Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this SDS for details of personal protective measures, and make sure that those measures are followed. Storage: Store in a cool, well ventilated area, out of direct sunlight. Check packaging - there may be further storage instructions on the label.

Section 8 - Exposure Controls and Personal Protection

The following Australian Standards will provide general advice regarding safety clothing and equipment: Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Occupational Protective Clothing: AS/NZS 4501 set 2008, Industrial Eye Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210. SWA Exposure Limits TWA (mg/m3) STEL (mg/m3) Exposure limits have not been established by SWA for any of the significant ingredients in this product. No special equipment is usually needed when occasionally handling small quantities. The following instructions are for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems. Ventilation: This product should only be used where there is ventilation that is adequate to keep exposure below the TWA levels. The use of exhaust fans is strongly recommended. Eye Protection: Eye protection is recommended when these products are being used. You are strongly encouraged to wear protective glasses or goggles. Skin Protection: We suggest that routine unprotected and long term contact with these products should be avoided and that suitable gloves should be worn during use. Protective Material Types: We suggest that protective clothing be made from the following materials: rubber, PVC. Respirator: Usually, no respirator is necessary when using this product.

Section 9 - Physical and Chemical Properties:

Physical Description & colour: Clear opaque liquid Boiling Point: Approximately 100°C at 100kPa. Freezing/Melting Point: Approximately 0°C. Volatiles: Water component. Specific Gravity: 1.01 – 1.03 Water Solubility: Completely soluble in water. pH: 6.00 – 7.50 Viscosity: Varies from product to product.

Section 10 - Stability and Reactivity

Reactivity: These products are unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties. Conditions to Avoid: None known. Incompatibilities: No particular Incompatibilities. Fire Decomposition: Only small quantities of decomposition products are expected from this products at temperatures normally achieved in a fire. This will only occur after heating to dryness. Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Oxides of sulphur (sulfur dioxide is a respiratory hazard) and other sulfur compounds. Most will have a foul odour. Water. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death. Polymerisation: This product will not undergo polymerisation reactions.

Section 11 - Toxicological Information

Local Effects: Target Organs: none known Classification of Hazardous Ingredients Ingredient Risk Phrases No ingredient mentioned in the HSIS Database is present in these products at hazardous concentrations.

Section 12 - Ecological Information

This product range is biodegradable. It is not likely to accumulate in the soil or water or cause long term problems.

Section 13 - Disposal Considerations

Disposal: Small quantities as used in a salon may safely be flushed down the sink. However, if you have old or redundant stock, call your local council, or your supplier for disposal advice.

Section 14 - Transport Information

UN NUMBER: Not Applicable DANGEROUS GOODS CLASS: Not Applicable SUBSIDIARY RISK: Not Applicable PACKAGING GROUP No: Not Applicable HAZCHEM CODE: Not Applicable POISON SCHEDULE: Not Applicable Finished packages product by ground (DOT); Non Hazardous Finished packages product by vessel (IMDG); Non Hazardous Finished packages product by air (IATA); Non Hazardous

Section 15 - Regulatory Information

AICS: All of the significant ingredients in this formulation are compliant with NICNAS regulations.

Section 16 - Other Information

This SDS contains only safety-related information. For other data see product literature. Acronyms: ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail, 7th Edition AICS Australian Inventory of Chemical Substances SWA Safe Work Australia, formerly ASCC and NOHSC CAS Number Chemical Abstracts Service Registry Number Hazchem Code Emergency action code of numbers and letters that provide information to emergency services especially firefighters IARC International Agency for Research on Cancer NOS Not otherwise specified NTP National Toxicology Program (USA) R-Phrase Risk Phrase SUSMP Standard for the Uniform Scheduling of Medicines & Poisons UN Number United Nations Number THIS SDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS SDS IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE. IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.

Please read all labels carefully before using product. This SDS is prepared in accord with the SWA document “National Code of Practice for the Preparation of Material Safety Data Sheets” 2nd Edition [NOHSC:2011(2003)]

SAFETY DATA SHEET

SECTION 1-CHEMICAL SUBSTANCE/PRODUCT AND COMPANY

IDENTIFICATION

Finished Product Name: Dry shampoo paste Item Code: Manufacturer information: Guangzhou Beaver Cosmetics Co., Ltd Add:No.5 Zhenxing Rd.,High-tech Industrial Park,Taiping Development Zone Conghua Guangzhou China 510990 Tel: 86-20-37940773 Fax: 86-20-37940775 Email: [email protected] DATE: March 28th, 2016

SECTION 2-HAZARDS INENTIFICATION EMERGENCY OVERVIEW: This is a personal care or cosmetic product that is safe for consumers and other users under intended and reasonably foreseeable use. Additional information on toxicological endpoints is available from the supplier upon request. POTENTIAL HEALTH EFFECTS: Eye: Contact may cause mild, transient irritation. Some redness and/or stinging may occur. Skin: Not expected to be irritating, sensitizing, photoallergenic or phototoxic when used as intended. If irritation occurs following intended use or prolonged contact it is expected to be mild and transient. Inhalation: Not expected to be irritating to the respiratory system. Not volatile therefore limited inhalation exposure anticipated. Ingestion: Product used as intended is not expected to cause gastrointestinal irritation. Accidental ingestion of undiluted product may cause mild gastrointestinal irritation with nausea, vomiting and diarrhea.

SECTION 3-COMPOSITION AND INGREDIENTS

The complete ingredient list for the finished product(s) is as follows: ZEOLITE，MAGNESIUM SULFATE ，CAPRYLIC/CAPRIC TRIGLYCERIDE，ISOHEXADECANE，CETEARETH-20， HYDROGENATED VEGETABLE OIL ， STEARYL ALCOHOL ， COCOS NUCIFERA (COCONUT) OIL，OLETH-20，STEARALKONIUM HECTORITE，PARFUM，ALCOHOL， SILICA，HEXYL CINNAMAL，SCLEROCARYA BIRREA SEED OIL，BIXA ORELLANA SEED

1 OIL，CARAPA GUAIANENSIS SEED OIL，LINALOOL，GERANIOL，LIMONENE

SECTION 4-FIRST AID MEASURES

Eye: Thorough rinsing for 15-20 minutes of the affected eye with water is recommended. If Discomfort or irritation persists, contact a physician. Skin Problem: Discontinue use of product. Apply cold compresses to affected areas to relieve and discomfort. If discomfort persists, contact a physician. Inhalation: If respiratory irritation occurs, remove individual to fresh air. Ingestion: Accidental ingestion of product may necessitate medical attention. In case of accidental Ingestion dilutes with fluids (water or milk) and treats symptomatically. Do not induce vomiting. Note: After first aid treatment, the caller should be advised that 1) a hospital emergency room or Family physician should be consulted if anything unusual occurs or appears necessary in the Judgment of the caller, and 2) that the subsequent management of the accident should be dictated by any persistency symptoms and under the direction of the physician.

SECTION 5-FIRE FIGHTING MEASURES

Flash Point & Method: Not applicable. Extinguishing Media: Use chemical foam, dry chemical, carbon dioxide or water. Explosion Hazard: No applicable information has been found. Fire Fighting Instructions: Contact emergency personnel. Use self-contained breathing apparatus and full protective gear, if large quantities of product are involved. Hazardous decomposition products may be released. Thermal degradation may produce oxides of carbon and/or nitrogen: hydrocarbons and/or derivatives. SECTION 6-ACCIDENTAL RELEAS4 MEASURES

Procedures for Spill/Leak Clean-up:

For Household Settings: Absorb liquid and scrub the area with detergent. Dilute with water.

For Non-Household Settings :Use safety glasses or safety goggles if splash hazards exist: use Gloves and other protective clothing (apron, boots, etc) to prevent skin contact.

SECTION 7-HANDLIND STORAGE

Precautions for Safe Handling:

For Household Settings: Avoid contact with eyes. For Non-Household Settings: No unusual handling or storage requirements. Storage in large

2 Quantities (as in warehouses) should be in a well-ventilated, cool area. Conditions for Safe Storage:

For Household Settings: No acquirable information has been found.

For Non-Household Settings: No unusual handling or storage requirements. Storage in large Quantities (as in warehouses) should be in a well-ventilated, cool area. Other Recommendations: None.

SECTION 8-EXPOSURE CONTROLS, PERSONAL PROTECTION

For Household settings: This is a personal care or cosmetic product that is safe for consumers and other users under Normal and reasonably foreseen use.

For Non-Household Settings: Use safety glasses or safety goggles if splash hazards exist; use gloves and other protective clothing (apron, boots, etc) to prevent skin contact. Always follow good hygienic work practices. Avoid prolonged contact with skin and clothing.

SECTION 9-PHYSICAL AND CHEMICAL PROPERTIES

Color, and Appearance : White Paste Physical State: White Paste Odor：Perfume Odor

SECTION 10-STABILITY AND REACTIVITY

Conditions to Avoid: No applicable information has been found. Other Recommendations : None

SECTION 11-TOXICOLOGICAL INFORMATION

This is a hair care product that is safe for consumers and other users under Intended and reasonably foreseeable use. Additional information on toxicological endpoints is Available from the supplier upon request. Chronic Effects: Finished product is not expected to have chronic health effects. Target Organs: No adverse health effects on target organs expected for finished product.

SECTION 12-ECOLOGICAL INFORMATION The product ingredients are expected to be safe for the environment at concentrations predicted under normal use and accidental spill scenarios. Packing components are compatible with the conventional solid management practices. Additional information is available from the supplier on request.

3

SECTION 13-DISPOSAL CONSIDERATIONS Disposal should be in accordance with Federal, state/provincial and local regulations. For Household settings: The following instructions are for consumer usage only. Do not discharge product into natural waters without pre-treatment or adequate dilution.

For Non-Household settings: Products covered by this MSDS, in their original form, when disposed as waste, are considered non hazardous waste according. Disposal should be in accordance with local, state and federal regulations.

SECTION 14-TRANSPORT INFORMATION Finished packaged product transported by ground (DOT):Non hazardous Finished packaged product transported by vessel (IMDG): Non hazardous Finished packaged product transported by air (IATA): Non hazardous

SECTION 15- REGULATORY INFORMATION Regulated as a Cosmetic and /or Drug under GMPC (US, EU)

Other Perfumes contained within the products covered by this MSDS comply with appropriate IFRA guidance.

SECTION 16-OTHER INFORMATION This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

4 Page 1 of 6 Quality manufacturers of bath & body care products – made in Australia SAFETY DATA SHEET According to Regulation (EC) no. 1907/2006

SECTION 1: Identification of the substance/mixture & of the Company/ Undertaking of the substance/mixture and of the company/undertaking 1.1 Product Name: Eleven Extra Hold Styling Clay

1.2 Application of the substance/mixture: Hair styling product. For external use only.

1.3 Details of the Manufacturer / Distributor: Natural Beauty Care Pty Ltd Eleven Australia Pty Ltd 8 Teton Court, 7 Endeavour Way, Highett, Victoria Sunshine West, Victoria 3190, Australia. 3020, Australia.

1.4 Emergency telephone number: +61 3 9553 0733 Facsimile Number: +61 3 9553 4988

1.5 POISON INFORMATION CENTRE: 13 11 26 (Australia)

SECTION 2: Hazard Identification

Not classified as Dangerous goods by the criteria of the Australian Dangerous goods code (ADG) for Transport and Rail. NON-DANGEROUS GOODS.

This material is a personal care product that is safe for consumers with intended and foreseeable use. This product is non- hazardous according to Work Safe Australia.

Classification of the substance or mixture (Classification according to Regulation (EC) No 1272/2008): Nil Classification according to the Directive 67/548/EEC or Directive 1999/45/EC: Not regulated

Signal word: Not relevant

Hazard statements: Not relevant

Precautionary statements: P101 If medical advice is needed, have product container or label at hand P102 Keep out of reach of children P103 Read label before use

Page 2 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 3: Composition/formulation on ingredients

Name of Chemical CAS Number Percentage

w/w Petrolatum 8009-03-8 < 25 Beeswax (Cera Alba) 8012-89-3 < 25 Water (Aqua) 7732-18-5 < 20 Oleth-5 9004-98-2 < 20 Paraffin 8002-74-2 < 10 Kaolin 1332-58-7 < 10 Bentonite 1302-78-9 < 10 Mineral Oil (Paraffinum Liquidum) 8012-95-1 < 5

Ceteareth-20 68439-49-6 < 5 Fragrance (Parfum) - < 1

Phenoxyethanol 122-99-6 < 1 Citric Acid 77-92-9 < 0.5

Copernicia Cerifera (Carnauba) Wax 8015-86-9 < 0.5 Potassium Sorbate 24634-61-5 < 0.5 Ethylhexylglycerin 70445-33-9 < 0.5 Sodium Benzoate 532-32-1 < 0.5

SECTION 4: First Aid Measures

4.1 Description of first aid measures General information: No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. HEALTH EFFECTS: Acute - Swallowed May be harmful if large amounts are swallowed Acute - Eye Full strength material may be irritating to eyes Acute - Skin Not considered an irritant through normal use. Full strength material in repeated or prolonged contact with skin may be irritating and cause allergic reactions in sensitive individuals Acute - Inhaled Full strength material should not cause any irritation to the mucous membrane and upper airways

FIRST AID: Swallowed Do not induce vomiting, Give plenty of water and seek medical advice Eye Flush eye with copious amounts of water for 15 minutes including under eyelid. If discomfit persists, obtain medical advice. Skin Remove contaminated clothing. Wash affected areas with warm soapy water

Inhaled Remove to fresh uncontaminated air, lay patient on back until breathing returns to normal

Page 3 of 6 Quality manufacturers of bath & body care products – made in Australia

4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available.

SECTION 5: Firefighting Measures

5.1 Suitable Extinguishing media: Carbon dioxide, Foam, Dry Chemical

5.2 Special hazards arising from the substance or mixture: No further relevant information available.

5.3 Advice for firefighters: Wear Protective equipment. Do not inhale explosion gases or combustion gases. Hazchem Code: Not applicable.

SECTION 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures: Remove all sources of ignition. Increase ventilation. Evacuate all personnel. Wear sufficient respiratory protection and full protective clothing to minimise skin and eye exposure. If possible contain the spill.

6.2 Environmental precautions: No special measures required.

6.3 Methods and material for containment and cleaning up: Slippery when spilt. Clean up immediately. Wear protective equipment to avoid eye contact. Contain – prevent run off into drains and waterways. Use absorbent material. Collect and seal on properly labelled containers for disposal. If large quantities of this material enter the waterways, contact the Environmental Protection Authority or you local Waste Management Authority.

6.4 Reference to other sections: See Section 7 for information on safe handling.

SECTION 7: Handling & Storage

7.1 Precautions for safe handling None required when handling small quantities. Avoid contact with eyes. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing.

Information about fire - and explosion protection: No special measures required.

7.2 Conditions for safe storage, including any incompatibilities: Store below 30C if in original containers. Store in a cool dry well ventilated area. Store away from Incompatible materials.

7.3 Specific end use(s) No further relevant information available.

Page 4 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 8: Exposure Controls /Personal Protection:

Additional information about design of technical facilities: No further data; see item 7.

8.1 Control parameters: No value assigned for this specific material

8.2 Appropriate engineering controls: Non-required

8.3 Personal Protection: None required when handling small quantities. Avoid contact with eyes. Do not ingest. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing. Some sensitive individuals may develop an allergic response.

National Exposure Standards: No exposure standards have been established for this material by Work Safe Australia. Biological Limit Values: No biological limit allowed.

SECTION 9: Physical & Chemical Properties Appearance: Thick Waxy Balm Colour: Grey Odour: Cool Melon Odour threshold: Not determined. pH: 5.0-5.5 Flash point: Not available Melting point/Melting range: Not determined Boiling point/Boiling range: Not determined. Danger of explosion: Product does not present an explosion hazard. Self-igniting: Product is not self - igniting. Solubility in / Miscibility with water: Soluble. Density at 20 °C: 0.90-1.04 g/cm³ Vapour density Not applicable. Vapour pressure: Not applicable.

SECTION 10: Stability & Reactivity

10.1 Reactivity: No further relevant information available. 10.2 Chemical stability: Stable under normal handling and storage conditions. Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid No further relevant information available. 10.5 Incompatible materials: No further relevant information available. 10.6 Hazardous decomposition products: None under normal conditions of storage and use.

SECTION 11: Toxicology Information

11.1 Information on toxicological effects: No adverse health effects expected if the product is handled in accordance with this safety data sheet and the product label. Product is safe for its intended use based on the formulation, testing results and the history of safe consumer use.

Acute toxicity: No LD50 data available for this product

Primary irritant effect: On the skin: No irritant effect On the eye: No irritating effect Page 5 of 6 Quality manufacturers of bath & body care products – made in Australia

Carcinogen Classification: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed carcinogen by IARC

SECTION 12: Ecological Information

12.1 Ecotoxicity: Avoid contaminating waterways

12.2 Persistence/degradability: No tested data available on this product.

12.3 Bioaccumulative potential: This product shows a low bioaccumulation potential

12.4 Mobility: Prevent contamination of soil, ground and surface water.

Section 13: Disposals Consideration

Disposal Methods: Refer to Waste Management Authority. Dispose of contents/containers in accordance with local/regional/national/international regulations.

SECTION 14: Transport Information

ADG 7.3 Land Transport of Dangerous Goods Labels required: No special requirements UN Number: N/A Proper Shipping Name: N/A DG Class: N/A Subsidiary Risk: None Packing Group: N/A HAZCHEM Code: N/A Special Provision: N/A

MARITIME TRANSPORTATION AIR TRANSPORTATION IMCD IATA Dangerous Goods Regulations (DGR) 56th Edition 2015 IMCD: N/A ICAO/IATA Class: N/A Label: N/A Label: N/A UN Number: N/A UN Number: N/A Packaging Group: Not allocated Packaging Group: N/A EMS Number: N/A Marine Pollutant: Not allocated Proper Shipping Name: As above Proper Shipping Name: As above Special Provisions; N/A Special Provisions; N/A

Page 6 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 15: Regulatory Information

POISONS SCHEDULE (SUSMP): Not subject to labelling

All ingredients in this product are compliant with NICNAS AICS: regulations

SECTION 16: OTHER INFORMATION

The information herein is accurate to the best of our knowledge. However, it is meant to describe safety requirements of our products, thus this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. No warranty is expressed or made as to this document’s accuracy, reliability or completeness. User has the sole responsibility to determine the suitability of the materials for any use and the manner of use contemplated.

Relevant phrases Non relevant

Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) AICS: Australian Inventory of Chemical substances NICNAS: National Industrial Chemical Notification & Assessment Scheme IARC: International Agency for Research Cancer

MSDS prepared by: Natural Beauty Care Pty. Ltd. Issue Date: 14/06/2016 Revision Number: 1 END OF MSDS ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY

Ozdare Business Services Chemwatch Hazard Alert Code: 4 Chemwatch: 33-4542 Issue Date: 01/01/2013 Version No: 2.1.1.1 Print Date: 23/05/2016 Safety Data Sheet according to WHS and ADG requirements Initial Date: Not Available S.GHS.AUS.EN

SECTION 1 IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING

Product Identifier

Product name ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Synonyms Not Available Proper shipping name AEROSOLS Other means of Not Available identification

Relevant identified uses of the substance or mixture and uses advised against

SDS are intended for use in the workplace. For domestic-use products, refer to consumer labels. Relevant identified uses Application is by spray atomisation from a hand held aerosol pack Hair styling product.

Details of the supplier of the safety data sheet

Registered company name Ozdare Business Services Address 7 Endeavour Way Sunshine West VIC 3020 Australia Telephone +61 3 9314 9099 Fax +61 3 9314 9211 Website Not Available Email Not Available

Emergency telephone number

Association / Organisation Not Available Emergency telephone Not Available numbers Other emergency telephone Not Available numbers

SECTION 2 HAZARDS IDENTIFICATION

Classification of the substance or mixture

HAZARDOUS CHEMICAL. DANGEROUS GOODS. According to the WHS Regulations and the ADG Code.

CHEMWATCH HAZARD RATINGS Min Max Flammability 4 Toxicity 0 0 = Minimum Body Contact 2 1 = Low 2 = Moderate Reactivity 1 3 = High Chronic 0 4 = Extreme

Poisons Schedule Not Applicable

Classification [1] Aerosols Category 1, Eye Irritation Category 2A Legend: 1. Classified by Chemwatch; 2. Classification drawn from HSIS ; 3. Classification drawn from EC Directive 1272/2008 - Annex VI

Label elements

GHS label elements

SIGNAL WORD DANGER

Hazard statement(s)

H222 Extremely flammable aerosol.

Continued... Chemwatch: 33-4542 Page 2 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Print Date: 23/05/2016

H319 Causes serious eye irritation. AUH044 Risk of explosion if heated under confinement

Precautionary statement(s) Prevention

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P211 Do not spray on an open flame or other ignition source. P251 Pressurized container: Do not pierce or burn, even after use. P280 Wear protective gloves/protective clothing/eye protection/face protection.

Precautionary statement(s) Response

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention.

Precautionary statement(s) Storage

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Precautionary statement(s) Disposal Not Applicable

SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS

Substances See section below for composition of Mixtures

Mixtures

CAS No %[weight] Name 64-17-5 >60 ethanol NOTE: Manufacturer has supplied full ingredient information to allow CHEMWATCH assessment.

SECTION 4 FIRST AID MEASURES

Description of first aid measures

If aerosols come in contact with the eyes: Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Eye Contact Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Transport to hospital or doctor without delay. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. Wipe off excess with absorbent tissue or towel. Skin Contact Wash with soap and water. If aerosols, fumes or combustion products are inhaled: Remove to fresh air. Lay patient down. Keep warm and rested. Inhalation Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. If breathing is shallow or has stopped, ensure clear airway and apply resuscitation, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor. Ingestion Not considered a normal route of entry.

Indication of any immediate medical attention and special treatment needed Treat symptomatically.

SECTION 5 FIREFIGHTING MEASURES

Extinguishing media SMALL FIRE: Water spray, dry chemical or CO2 LARGE FIRE: Water spray or fog.

Special hazards arising from the substrate or mixture

Fire Incompatibility Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may result

Advice for firefighters

Alert Fire Brigade and tell them location and nature of hazard. May be violently or explosively reactive. Wear breathing apparatus plus protective gloves. Fire Fighting Prevent, by any means available, spillage from entering drains or water course. If safe, switch off electrical equipment until vapour fire hazard removed. Use water delivered as a fine spray to control fire and cool adjacent area.

Continued... Chemwatch: 33-4542 Page 3 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Print Date: 23/05/2016

DO NOT approach containers suspected to be hot. Liquid and vapour are highly flammable. Severe fire hazard when exposed to heat or flame. Vapour forms an explosive mixture with air. Severe explosion hazard, in the form of vapour, when exposed to flame or spark. Fire/Explosion Hazard Vapour may travel a considerable distance to source of ignition. Heating may cause expansion or decomposition with violent container rupture. Aerosol cans may explode on exposure to naked flames. Other combustion products include:, carbon dioxide (CO2), other pyrolysis products typical of burning organic material

SECTION 6 ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Wear protective clothing, impervious gloves and safety glasses. Minor Spills Shut off all possible sources of ignition and increase ventilation. Wipe up. If safe, damaged cans should be placed in a container outdoors, away from all ignition sources, until pressure has dissipated. Undamaged cans should be gathered and stowed safely. Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard. May be violently or explosively reactive. Wear breathing apparatus plus protective gloves. Major Spills Prevent, by any means available, spillage from entering drains or water courses No smoking, naked lights or ignition sources. Increase ventilation. Stop leak if safe to do so.

Personal Protective Equipment advice is contained in Section 8 of the SDS.

SECTION 7 HANDLING AND STORAGE

Precautions for safe handling

None required when handling small quantities. OTHERWISE: Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Safe handling Use in a well-ventilated area. Prevent concentration in hollows and sumps. DO NOT enter confined spaces until atmosphere has been checked. Avoid smoking, naked lights or ignition sources. Avoid contact with incompatible materials. Keep dry to avoid corrosion of cans. Corrosion may result in container perforation and internal pressure may eject contents of can Store in original containers in approved flammable liquid storage area. DO NOT store in pits, depressions, basements or areas where vapours may be trapped. Other information No smoking, naked lights, heat or ignition sources. Keep containers securely sealed. Contents under pressure. Store away from incompatible materials. Store in a cool, dry, well ventilated area.

Conditions for safe storage, including any incompatibilities

Aerosol dispenser. Suitable container Check that containers are clearly labelled. Storage incompatibility Avoid storage with oxidisers

SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION

Control parameters

OCCUPATIONAL EXPOSURE LIMITS (OEL) INGREDIENT DATA Source Ingredient Material name TWA STEL Peak Notes Australia Exposure Standards ethanol Ethyl alcohol 1880 mg/m3 / 1000 ppm Not Available Not Available Not Available

EMERGENCY LIMITS Ingredient Material name TEEL-1 TEEL-2 TEEL-3 ethanol Ethyl alcohol; (Ethanol) Not Available Not Available Not Available

Ingredient Original IDLH Revised IDLH ethanol 15,000 ppm 3,300 [LEL] ppm

Exposure controls

None required when handling small quantities. Appropriate engineering OTHERWISE: controls Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed engineering controls can be highly

Continued... Chemwatch: 33-4542 Page 4 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Print Date: 23/05/2016

effective in protecting workers and will typically be independent of worker interactions to provide this high level of protection. The basic types of engineering controls are: Process controls which involve changing the way a job activity or process is done to reduce the risk. Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation that strategically "adds" and "removes" air in the work environment. Ventilation can remove or dilute an air contaminant if designed properly. The design of a ventilation system must match the particular process and chemical or contaminant in use. Employers may need to use multiple types of controls to prevent employee overexposure.

Personal protection

No special equipment for minor exposure i.e. when handling small quantities. OTHERWISE: Safety glasses with side shields. Eye and face protection Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lenses or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first-aid personnel should be trained in their removal and suitable equipment should be readily available. In the event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Skin protection See Hand protection below No special equipment needed when handling small quantities. OTHERWISE: For potentially moderate exposures: Hands/feet protection Wear general protective gloves, eg. light weight rubber gloves. For potentially heavy exposures: Wear chemical protective gloves, eg. PVC. and safety footwear. Body protection See Other protection below No special equipment needed when handling small quantities. OTHERWISE: Overalls. Other protection Skin cleansing cream. Eyewash unit. Do not spray on hot surfaces. Thermal hazards Not Available

Recommended material(s) Respiratory protection GLOVE SELECTION INDEX Type AX Filter of sufficient capacity. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Glove selection is based on a modified presentation of the: Z88 or national equivalent) "Forsberg Clothing Performance Index". Selection of the Class and Type of respirator will depend upon the level of breathing zone The effect(s) of the following substance(s) are taken into account in the computer- contaminant and the chemical nature of the contaminant. Protection Factors (defined as the generated selection: ratio of contaminant outside and inside the mask) may also be important. ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Required Maximum gas/vapour Half-face Full-Face Material CPI minimum concentration present in air Respirator Respirator BUTYL C protection factor p.p.m. (by volume) NATURAL RUBBER C up to 10 1000 AX-AUS / - Class1 NATURAL+NEOPRENE C up to 50 1000 - AX-AUS / NEOPRENE C Class 1 NITRILE C up to 50 5000 Airline * - NITRILE+PVC C up to 100 5000 - AX-2 PE/EVAL/PE C up to 100 10000 - AX-3 PVC C 100+ Airline**

* CPI - Chemwatch Performance Index * - Continuous Flow ** - Continuous-flow or positive pressure demand A: Best Selection A(All classes) = Organic vapours, B AUS or B1 = Acid gasses, B2 = Acid gas or hydrogen B: Satisfactory; may degrade after 4 hours continuous immersion cyanide(HCN), B3 = Acid gas or hydrogen cyanide(HCN), E = Sulfur dioxide(SO2), G = C: Poor to Dangerous Choice for other than short term immersion Agricultural chemicals, K = Ammonia(NH3), Hg = Mercury, NO = Oxides of nitrogen, MB = NOTE: As a series of factors will influence the actual performance of the glove, a final Methyl bromide, AX = Low boiling point organic compounds(below 65 degC) selection must be based on detailed observation. - * Where the glove is to be used on a short term, casual or infrequent basis, factors such as "feel" or convenience (e.g. disposability), may dictate a choice of gloves which might otherwise be unsuitable following long-term or frequent use. A qualified practitioner should be consulted.

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties

Appearance 22aer Cloudy liquid spray with a perfumed odour; partly mixes with water.

Physical state Liquid Relative density (Water = 1) Not Available Partition coefficient Odour Not Available Not Available n-octanol / water Auto-ignition temperature Odour threshold Not Available Not Available (°C)

Continued... Chemwatch: 33-4542 Page 5 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Print Date: 23/05/2016

Decomposition pH (as supplied) Not Applicable Not Available temperature Melting point / freezing Not Available Viscosity (cSt) Not Available point (°C) Initial boiling point and Not Available Molecular weight (g/mol) Not Applicable boiling range (°C) Flash point (°C) Not Available Taste Not Available Evaporation rate Not Available Explosive properties Not Available Flammability Not Available Oxidising properties Not Available Surface Tension (dyn/cm or Upper Explosive Limit (%) Not Available Not Available mN/m) Lower Explosive Limit (%) Not Available Volatile Component (%vol) Not Available Vapour pressure (kPa) Not Available Gas group Not Available Solubility in water (g/L) Partly Miscible pH as a solution (1%) Not Applicable Vapour density (Air = 1) Not Available VOC g/L Not Available

SECTION 10 STABILITY AND REACTIVITY

Reactivity See section 7 Elevated temperatures. Presence of open flame. Chemical stability Product is considered stable. Hazardous polymerisation will not occur. Possibility of hazardous See section 7 reactions Conditions to avoid See section 7 Incompatible materials See section 7 Hazardous decomposition See section 5 products

SECTION 11 TOXICOLOGICAL INFORMATION

Information on toxicological effects

Inhalation hazard is increased at higher temperatures. Inhalation of high concentrations of gas/vapour causes lung irritation with coughing and nausea, central nervous depression with headache and dizziness, Inhaled slowing of reflexes, fatigue and inco-ordination. WARNING:Intentional misuse by concentrating/inhaling contents may be lethal. Not normally a hazard due to physical form of product. Ingestion Considered an unlikely route of entry in commercial/industrial environments Ingestion may result in nausea, abdominal irritation, pain and vomiting Not considered an irritant through normal use. Skin Contact The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin. Spray mist may produce discomfort Eye The material may produce severe irritation to the eye causing pronounced inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis. Principal routes of exposure are by accidental skin and eye contact and by inhalation of vapours especially at higher temperatures. As with any chemical product, contact with unprotected bare skin; inhalation of vapour, mist or dust in work place atmosphere; or ingestion in any form, should be Chronic avoided by observing good occupational work practice. WARNING: Aerosol containers may present pressure related hazards.

ELEVEN GIVE ME HOLD TOXICITY IRRITATION FLEXIBLE HAIR SPRAY Not Available Not Available

TOXICITY IRRITATION

Dermal (rabbit) LD50: 17100 mg/kg[1] Eye (rabbit): 500 mg SEVERE

ethanol Inhalation (rat) LC50: 64000 ppm/4h[2] Eye (rabbit):100mg/24hr-moderate

Oral (rat) LD50: >1187-2769 mg/kg[1] Skin (rabbit):20 mg/24hr-moderate Skin (rabbit):400 mg (open)-mild

Legend: 1. Value obtained from Europe ECHA Registered Substances - Acute toxicity 2.* Value obtained from manufacturer's SDS. Unless otherwise specified data extracted from RTECS - Register of Toxic Effect of chemical Substances

The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, ETHANOL scaling and thickening of the skin.

Acute Toxicity Carcinogenicity Skin Irritation/Corrosion Reproductivity

Continued... Chemwatch: 33-4542 Page 6 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Print Date: 23/05/2016

Serious Eye STOT - Single Exposure Damage/Irritation Respiratory or Skin STOT - Repeated Exposure sensitisation Mutagenicity Aspiration Hazard Legend: – Data available but does not fill the criteria for classification – Data required to make classification available – Data Not Available to make classification

SECTION 12 ECOLOGICAL INFORMATION

Toxicity

Ingredient Endpoint Test Duration (hr) Species Value Source ethanol EC50 24 Algae or other aquatic plants 0.0129024mg/L 4 ethanol EC50 48 Crustacea 2mg/L 4 ethanol LC50 96 Fish 42mg/L 4 ethanol NOEC 2016 Fish 0.000375mg/L 4 ethanol EC50 72 Algae or other aquatic plants 275mg/L 2 Extracted from 1. IUCLID Toxicity Data 2. Europe ECHA Registered Substances - Ecotoxicological Information - Aquatic Toxicity 3. EPIWIN Suite V3.12 - Legend: Aquatic Toxicity Data (Estimated) 4. US EPA, Ecotox database - Aquatic Toxicity Data 5. ECETOC Aquatic Hazard Assessment Data 6. NITE (Japan) - Bioconcentration Data 7. METI (Japan) - Bioconcentration Data 8. Vendor Data

Persistence and degradability

Ingredient Persistence: Water/Soil Persistence: Air ethanol LOW (Half-life = 2.17 days) LOW (Half-life = 5.08 days)

Bioaccumulative potential

Ingredient Bioaccumulation ethanol LOW (LogKOW = -0.31)

Mobility in soil

Ingredient Mobility ethanol HIGH (KOC = 1)

SECTION 13 DISPOSAL CONSIDERATIONS

Waste treatment methods

Consult State Land Waste Management Authority for disposal. Discharge contents of damaged aerosol cans at an approved site. Product / Packaging Allow small quantities to evaporate. disposal DO NOT incinerate or puncture aerosol cans. Bury residues and emptied aerosol cans at an approved site.

SECTION 14 TRANSPORT INFORMATION

Labels Required

Marine Pollutant NO HAZCHEM Not Applicable

Land transport (ADG)

UN number 1950 Packing group Not Applicable UN proper shipping name AEROSOLS Environmental hazard Not Applicable

Class 2.1 Transport hazard class(es) Subrisk Not Applicable

Special provisions 63 190 277 327 344 Special precautions for user Limited quantity 1000ml

Continued... Chemwatch: 33-4542 Page 7 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Print Date: 23/05/2016

Air transport (ICAO-IATA / DGR)

UN number 1950 Packing group Not Applicable UN proper shipping name Aerosols Environmental hazard Not Applicable

ICAO/IATA Class 2.1 Transport hazard class(es) ICAO / IATA Subrisk Not Applicable ERG Code 10L

Special provisions A145A167A802; A1A145A167A802 Cargo Only Packing Instructions 203 Cargo Only Maximum Qty / Pack 150 kg Special precautions for user Passenger and Cargo Packing Instructions 203; Forbidden Passenger and Cargo Maximum Qty / Pack 75 kg; Forbidden Passenger and Cargo Limited Quantity Packing Instructions Y203; Forbidden Passenger and Cargo Limited Maximum Qty / Pack 30 kg G; Forbidden

Sea transport (IMDG-Code / GGVSee)

UN number 1950 Packing group Not Applicable UN proper shipping name AEROSOLS Environmental hazard Not Applicable

IMDG Class 2.1 Transport hazard class(es) IMDG Subrisk Not Applicable

EMS Number F-D, S-U Special precautions for user Special provisions 63 190 277 327 344 959 Limited Quantities 1000ml

Transport in bulk according to Annex II of MARPOL and the IBC code Not Applicable

SECTION 15 REGULATORY INFORMATION

Safety, health and environmental regulations / legislation specific for the substance or mixture

ETHANOL(64-17-5) IS FOUND ON THE FOLLOWING REGULATORY LISTS Australia Exposure Standards Australia Inventory of Chemical Substances (AICS) Australia Hazardous Substances Information System - Consolidated Lists

National Inventory Status Australia - AICS Y Canada - DSL Y Canada - NDSL N (ethanol) China - IECSC Y Europe - EINEC / ELINCS / Y NLP Japan - ENCS Y Korea - KECI Y New Zealand - NZIoC Y Philippines - PICCS Y USA - TSCA Y Y = All ingredients are on the inventory Legend: N = Not determined or one or more ingredients are not on the inventory and are not exempt from listing(see specific ingredients in brackets)

SECTION 16 OTHER INFORMATION

Other information Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch Classification committee using available literature references. A list of reference resources used to assist the committee may be found at: www.chemwatch.net

The SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks in the workplace or other

Continued... Chemwatch: 33-4542 Page 8 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN GIVE ME HOLD FLEXIBLE HAIR SPRAY Print Date: 23/05/2016

settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of use and current or available engineering controls must be considered.

Definitions and abbreviations PC－TWA: Permissible Concentration-Time Weighted Average PC－STEL: Permissible Concentration-Short Term Exposure Limit IARC: International Agency for Research on Cancer ACGIH: American Conference of Governmental Industrial Hygienists STEL: Short Term Exposure Limit TEEL: Temporary Emergency Exposure Limit。 IDLH: Immediately Dangerous to Life or Health Concentrations OSF: Odour Safety Factor NOAEL :No Observed Adverse Effect Level LOAEL: Lowest Observed Adverse Effect Level TLV: Threshold Limit Value LOD: Limit Of Detection OTV: Odour Threshold Value BCF: BioConcentration Factors BEI: Biological Exposure Index

This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written permission from CHEMWATCH. TEL (+61 3) 9572 4700.

end of SDS Page 1 of 6 Quality manufacturers of bath & body care products – made in Australia SAFETY DATA SHEET According to Regulation (EC) no. 1907/2006

SECTION 1: Identification of the substance/mixture & of the Company/ Undertaking of the substance/mixture and of the company/undertaking 1.1 Product Name: Eleven Frizz Control Shaping Cream

1.2 Application of the substance/mixture: Hair styling product. For external use only.

1.3 Details of the Manufacturer / Distributor: Natural Beauty Care Pty Ltd Eleven Australia Pty Ltd 8 Teton Court, 7 Endeavour Way, Highett, Victoria Sunshine West, Victoria 3190, Australia. 3020, Australia.

1.4 Emergency telephone number: +61 3 9553 0733 Facsimile Number: +61 3 9553 4988

1.5 POISON INFORMATION CENTRE: 13 11 26 (Australia)

SECTION 2: Hazard Identification

Not classified as Dangerous goods by the criteria of the Australian Dangerous goods code (ADG) for Transport and Rail. NON-DANGEROUS GOODS.

This material is a personal care product that is safe for consumers with intended and foreseeable use. This product is non- hazardous according to Work Safe Australia.

Classification of the substance or mixture (Classification according to Regulation (EC) No 1272/2008): Nil Classification according to the Directive 67/548/EEC or Directive 1999/45/EC: Not regulated

Signal word: Not relevant

Hazard statements: Not relevant

Precautionary statements: P101 If medical advice is needed, have product container or label at hand P102 Keep out of reach of children P103 Read label before use

Page 2 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 3: Composition/formulation on ingredients

Name of Chemical CAS Number Percentage w/w

Water (Aqua) 7732-18-5 < 70-80 Cetearyl Alcohol 67762-27-0 < 10 Glycerin 56-81-5 < 10 Petrolatum 8009-03-8 < 5 Ceteareth-20 68439-49-6 < 5 Propylene Glycol 57-55-6 < 5 PEG-75 Lanolin 61790-81-6 < 5 Paraffin 8002-74-2 < 5 PVP 9003-39-8 < 5 Cyclopentasiloxane 541-02-6 < 1 Phenoxyethanol 122-99-6 < 1 Cyclohexasiloxane 540-97-6 < 0.5 Carbomer 9003-01-4 < 0.5 Fragrance (Parfum) - < 0.5 Benzyl Alcohol 100-51-6 < 0.5 Triethanolamine 102-71-6 < 0.5

SECTION 4: First Aid Measures

4.1 Description of first aid measures General information: No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. HEALTH EFFECTS: Acute - Swallowed May be harmful if large amounts are swallowed Acute - Eye Full strength material may be irritating to eyes Acute - Skin Not considered an irritant through normal use. Full strength material in repeated or prolonged contact with skin may be irritating and cause allergic reactions in sensitive individuals Acute - Inhaled Full strength material should not cause any irritation to the mucous membrane and upper airways

FIRST AID: Swallowed Do not induce vomiting, Give plenty of water and seek medical advice Eye Flush eye with copious amounts of water for 15 minutes including under eyelid. If discomfit persists, obtain medical advice. Skin Remove contaminated clothing. Wash affected areas with warm soapy water

Inhaled Remove to fresh uncontaminated air, lay patient on back until breathing returns to normal

Page 3 of 6 Quality manufacturers of bath & body care products – made in Australia

4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available.

SECTION 5: Firefighting Measures

5.1 Suitable Extinguishing media: Carbon dioxide, Foam, Dry Chemical

5.2 Special hazards arising from the substance or mixture: No further relevant information available.

5.3 Advice for firefighters: Wear Protective equipment. Do not inhale explosion gases or combustion gases. Hazchem Code: Not applicable.

SECTION 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures: Remove all sources of ignition. Increase ventilation. Evacuate all personnel. Wear sufficient respiratory protection and full protective clothing to minimise skin and eye exposure. If possible contain the spill.

6.2 Environmental precautions: No special measures required.

6.3 Methods and material for containment and cleaning up: Slippery when spilt. Clean up immediately. Wear protective equipment to avoid eye contact. Contain – prevent run off into drains and waterways. Use absorbent material. Collect and seal on properly labelled containers for disposal. If large quantities of this material enter the waterways, contact the Environmental Protection Authority or you local Waste Management Authority.

6.4 Reference to other sections: See Section 7 for information on safe handling.

SECTION 7: Handling & Storage

7.1 Precautions for safe handling None required when handling small quantities. Avoid contact with eyes. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing.

Information about fire - and explosion protection: No special measures required.

7.2 Conditions for safe storage, including any incompatibilities: Store below 30C if in original containers. Store in a cool dry well ventilated area. Store away from Incompatible materials.

7.3 Specific end use(s) No further relevant information available.

Page 4 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 8: Exposure Controls /Personal Protection:

Additional information about design of technical facilities: No further data; see item 7.

8.1 Control parameters: No value assigned for this specific material

8.2 Appropriate engineering controls: Non-required

8.3 Personal Protection: None required when handling small quantities. Avoid contact with eyes. Do not ingest. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing. Some sensitive individuals may develop an allergic response.

National Exposure Standards: No exposure standards have been established for this material by Work Safe Australia. Biological Limit Values: No biological limit allowed.

SECTION 9: Physical & Chemical Properties Appearance: Thick Waxy Balm Colour: White/ Off White Odour: Pomegranate Odour threshold: Not determined. pH: 6.0-6.5 Flash point: Not available Melting point/Melting range: Not determined Boiling point/Boiling range: Not determined. Danger of explosion: Product does not present an explosion hazard. Self-igniting: Product is not self - igniting. Solubility in / Miscibility with water: Soluble. Density at 20 °C: 0.90-1.04 g/cm³ Vapour density Not applicable. Vapour pressure: Not applicable.

SECTION 10: Stability & Reactivity

10.1 Reactivity: No further relevant information available. 10.2 Chemical stability: Stable under normal handling and storage conditions. Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid No further relevant information available. 10.5 Incompatible materials: No further relevant information available. 10.6 Hazardous decomposition products: None under normal conditions of storage and use.

SECTION 11: Toxicology Information

11.1 Information on toxicological effects: No adverse health effects expected if the product is handled in accordance with this safety data sheet and the product label. Product is safe for its intended use based on the formulation, testing results and the history of safe consumer use.

Acute toxicity: No LD50 data available for this product

Primary irritant effect: On the skin: No irritant effect On the eye: No irritating effect Page 5 of 6 Quality manufacturers of bath & body care products – made in Australia

Carcinogen Classification: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed carcinogen by IARC

SECTION 12: Ecological Information

12.1 Ecotoxicity: Avoid contaminating waterways

12.2 Persistence/degradability: No tested data available on this product.

12.3 Bioaccumulative potential: This product shows a low bioaccumulation potential

12.4 Mobility: Prevent contamination of soil, ground and surface water.

Section 13: Disposals Consideration

Disposal Methods: Refer to Waste Management Authority. Dispose of contents/containers in accordance with local/regional/national/international regulations.

SECTION 14: Transport Information

ADG 7.3 Land Transport of Dangerous Goods Labels required: No special requirements UN Number: N/A Proper Shipping Name: N/A DG Class: N/A Subsidiary Risk: None Packing Group: N/A HAZCHEM Code: N/A Special Provision: N/A

MARITIME TRANSPORTATION AIR TRANSPORTATION IMCD IATA Dangerous Goods Regulations (DGR) 56th Edition 2015 IMCD: N/A ICAO/IATA Class: N/A Label: N/A Label: N/A UN Number: N/A UN Number: N/A Packaging Group: Not allocated Packaging Group: N/A EMS Number: N/A Marine Pollutant: Not allocated Proper Shipping Name: As above Proper Shipping Name: As above Special Provisions; N/A Special Provisions; N/A

Page 6 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 15: Regulatory Information

POISONS SCHEDULE (SUSMP): Not subject to labelling

All ingredients in this product are compliant with NICNAS AICS: regulations

SECTION 16: OTHER INFORMATION

The information herein is accurate to the best of our knowledge. However, it is meant to describe safety requirements of our products, thus this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. No warranty is expressed or made as to this document’s accuracy, reliability or completeness. User has the sole responsibility to determine the suitability of the materials for any use and the manner of use contemplated.

Relevant phrases Non relevant

Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) AICS: Australian Inventory of Chemical substances NICNAS: National Industrial Chemical Notification & Assessment Scheme IARC: International Agency for Research Cancer

MSDS prepared by: Natural Beauty Care Pty. Ltd. Issue Date: 14/06/2016 Revision Number: 1 END OF MSDS WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

SAFETY DATA SHEET Issuing Date 1/31/17 Revision Date 10/14/2014 Revision Number 0

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING GHS Product Identifier Product Name: Dry Shampoo

Other means of Identification Synonyms: none

Recommended use of the chemical and restrictions on use Recommended Use: No information available Uses advised against: No information available

Emergency telephone number Emergency Telephone 1-866-634-5100 Number Chemtrec 1-800-424-9300

2. HAZARD IDENTIFICATION Classification Serious Eye Damage/Eye Irritation Category 2A Carcinogenicity Category 2 Specific Target Organ Systemic toxicity (Single Exposure) Category 3 Simple Asphyxiant Yes Flammable Aerosols Category 1 Gases Under Pressure

GHS label elements, including precautionary statements

EMERGENCY OVERVIEW

Signal Word Danger Hazard Statements • Causes serious eye irritation • Suspected of causing cancer • May cause respiratory irritation • May cause drowsiness or dizziness • Extremely flammable aerosol

Appearance Clear Physical State Aerosol Odor Odor Fragranced Precautionary Statements

Page 1 of 9 WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

Prevention • Obtain special instructions before use. • Do not handle until all safety precautions have been read and understood. • Use personal protective equipment as required. • Wash face, hands and any exposed skin thoroughly after handling. • Wear eye/face protection. • Avoid breating dust/fune/gas/mist/vapors/spray. • Use only outdoors or in a well-ventilated area. • Keep away from heat/sparks/open flames/hot surfaces - No smoking. • Do not spray on an open flam or other ignition source. • Pressurized container: Do no pierce or burn, even after use. General Advice • If exposed or concerned: Get medical attention/advice Eyes • IF IN EYES: Rinse cautionsly with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. • If eye irritation persists: Get medical advice/attention. Inhalation • IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Storage • Store locked up. • Store in a well-ventilated place. Keep container tightly closed. • Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F Disposal • Dispose of contents/container to an approved waste disposal plant. Hazzard Not Otherwise Classifed (HNOC) Rapid evaporation of the liquid may cause frostbite.

Other information May be harmful if inhaled. Intentional misuse by deliberately concentrating and inhaling contents may be harmful or fatal.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name CAS-No Weight % Trade Secret Ethyl Alcohol 64-17-5 < 15 * Propane 74-98-6 < 20 * Isobutane 75-28-5 < 75 *

*The exact percentage (concentration) of composition has been withheld as a trade secret.

4. FIRST AID MEASURES Description of necessary first-aid measures Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention immediately if irritation persists. Skin Contact Wash off with warm water and soap. In case of contact with liquefied gas, thaw frosted parts

Page 2 of 9 WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

with lukewarm water. Get medical attention if symptoms occur. Inhalation IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical Ingestion Cleantt timouth with water and afterwards drink plenty of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention. Most important symptoms/effects, acute and delayed Most Important Symptoms/Effects Eye irritation/reactions. Frostbite. Drowsiness. Dizziness. Simple asphyxiant.

Indication of immediate medical attention and special treatment needed, if necessary

Notes to Physician Treat symptomatically.

5. FIRE-FIGHTING MEASURES Suitable Extinguishing Media Carbon dioxide (CO 2 ). Dry chemical. Alcohol-resistant foam. Water fog.

Unsuitable Extinguishing Media No information available.

Specific Hazards Arising from the Chemical No information available.

Hazardous Combustion Products Thermal decomposition can lead to release of irritating and toxic gases and vapors: Carbon oxides. Nitrogen oxides (NOx).

Explosion Data Sensitivity to Mechanical Impact Yes Sensitivity to Static Discharge Yes Protective Equipment and Precautions for Firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Personal Precautions Contents under pressure. Remove all sources of ignition. Do not puncture or incinerate cans. Avoid contact with skin, eyes and clothing. Do not touch damaged containers or spilled material Environmental Precautions Environmental Precautions See Section 12 for additional Ecological Information.

Methods and materials for containment and cleaning up Methods for Containment Prevent further leakage or spillage if safe to do so.

Methods for Cleaning Up Pick up and transfer to properly labeled containers. Cover liquid spill with sand, earth or other noncombustible absorbent material. Clean contaminated surface thoroughly.

7. HANDLING AND STORAGE Precautions for safe handling Handling Contents under pressure. Keep away from open flames, hot surfaces and sources of ignition. Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities

Page 3 of 9 WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

Storage Store in a cool, dry area away from potential sources of heat, open flames, sunlight or other chemicals. Incompatible Products Strong oxidizing agents.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION Control parameters Exposure Guidelines Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH Ethyl Alcohol TWA: 1000 ppm TWA: 1000 ppm TWA: 1000 ppm Ethyl Alcohol 64-17-5

Appropriate engineering controls Engineering Measures Showers Eyewash stations Ventilation systems Individual protection measures, such as personal protective equipment Eye/Face Protection No protective equipment is needed under normal use conditions. Risk of contact, wear: Safety glasses with side-shields. Skin and Body Protection No protective equipment is needed under normal use conditions. Lightweight protective clothing. Protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Respiratory Protection No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn.

Hygiene Measures Handle in accordance with good industrial hygiene and safety practice. 9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties Physical State Aerosol Appearance Clear Odor Fragranced Odor Threshold No information available Property Values Remarks/ - Method pH No data available Enter here Melting Point/Range No data available Enter here Boiling Point/Boiling Range 79.4 ºC / 175 ºF for concentrate Flash Point 18.3C/ 65F Open cup ( for pure ethanol) Evaporation rate > 1 Enter here

Flammability (solid, gas) No data available Enter here Flammability Limits in Air No data available Enter here upper flammability limit No data available Enter here lower flammability limit No data available Enter here Vapor Pressure 45-55 psig @ 70 F Enter here Vapor Density No data available Enter here

Page 4 of 9 WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

Specific Gravity 1.02 water = 1 Water Solubility No data available Enter here Solubility in other solvents No data available Enter here Partition coefficient: n-octanol/water No data available Enter here Autoignition Temperature No data available Enter here Decomposition Temperature No data available Enter here Viscosity No data available Enter here

Flammable Properties Flammable Enter here

Explosive Properties No data available Enter here Oxidizing Properties No data available Enter here

Other information VOC Content (%) 92%

10. STABILITY AND REACTIVITY Reactivity Not reactive under normal conditions. Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions None under normal processing. Hazardous Polymerization Hazardous polymerization does not occur. Conditions to avoid Heat, flames and sparks. Incompatible materials Strong oxidizing agents Hazardous decomposition products Carbon oxides. Nitrogen oxides (NOx).

11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Product Information Inhalation May cause irritation of respiratory tract. May cause drowsiness and dizziness. Intentional misuse by deliberately concentrating and inhaling contents may be Eye Contact Contact with eyes may cause serious eye irritation based on the components present within the product. Skin Contact Contact with product may cause frostbite. Ingestion May be harmful if swallowed. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Chemical Name LD50 Oral LD50 Dermal LC50 Inhalation Ethyl Alcohol 7060 mg/kg (Rat) - 124.7 mg/L ( Rat) 4 h

Page 5 of 9 WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

Symptoms related to the physical, chemical and toxicological characteristics

Symptoms Eye contact with liquid may cause irritation including stinging, burning, tearing, or reddening of the eyes. Avoid skin contact with leaking liquid (danger of frostbite).

Delayed and immediate effects and also chronic effects from short and long term exposure Sensitization No information available. Mutagenic Effects No information available. Carcinogenicity Ethanol has been shown to be carcinogenic in long-term studies only when consumed and abused as an alcoholic beverage. Vinyl acetate is identified by IARC and ACGIH as a potential carcinogen based on data in animal studies. Lifetime exposure to high vapor concentrations (600 ppm) of Vinyl acetate caused malignant and benign tumors of the respiratory tract of rats, but not in mice: this response possibly being associated with the irritant effect. Vinyl acetate has been tested for carcinogenic potential in rats in two separate drinking water studies. In one study, in which animals were exposed to concentrations up to 0.5% in water, there was no evidence of carcinogenicity. In the second study, conducted at higher concentrations (up to 1% in water), evidence of cancer in the stomach and oral cavities was observed. There is no id th t i l t t i h Chemical Name ACGIH IARC NTP OSHA Ethyl Alcohol A3 Group 1 Known X

Reproductive Toxicity No information available. STOT - single exposure May cause respiratory irritation. May cause drowsiness or dizziness. STOT - repeated exposure No information available. Aspiration Hazard No information available. Numerical measures of toxicity - Product The following values are calculated based on chapter 3.1 of the GHS document: LD50 Oral 8538 mg/kg; Acute toxicity estimate LD50 Dermal 23700 mg/kg; Acute toxicity estimate Inhalation mg/L; Acute toxicity estimate Vapor 134.2 mg/L; Acute toxicity estimate

12. ECOLOGICAL INFORMATION Ecotoxicity The environmental impact of this product has not been fully investigated. Daphnia Magna (Water Chemical Name Toxicity to Algae Toxicity to Fish Toxicity to Microorganisms Flea) Ethyl Alcohol LC50 96 h: 12.0-16.0mL/L EC50=34634 mg?L 30 min LC50 48h: 9268-14221 mg/L

Persistence and Degradability No information available.

Page 6 of 9 WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

Bioaccumulation No information available. Chemical Name Log Pow Ethyl alcohol -0.32

Other Adverse Effects No information available. 13. DISPOSAL CONSIDERATIONS Waste Disposal Methods Dispose of in accordance with federal, state, and local regulations. Contaminated Packaging Do not re-use empty containers. 14. TRANSPORT INFORMATION DOT Proper shipping name Consumer commodity Hazard Class ORM-D Description Consumer commodity, ORM-D Emergency Response Guide 126 Number TDG UN-Number UN1950 Proper Shipping Name Aerosols Hazard Class 2.1 Description UN1950, Aerosols, 2.1 MEX UN-Number UN1950 Proper Shipping Name Aerosols Hazard Class 2.1 Description UN1950, Aerosols, 2.1 ICAO UN-Number ID8000 Proper Shipping Name Consumer commodity Hazard Class 9 Description ID8000, Consumer commodity, 9 IATA UN-Number ID8000 Proper Shipping Name Consumer commodity Hazard Class 9 ERG Code 9L Description ID8000, Consumer commodity, 9 IMDG/IMO UN-Number UN1950 Proper Shipping Name Aerosols Hazard Class 2 EmS No. F-D, S-U Description UN1950, Aerosols, 2.1 (18.3°C o.c.)

15. REGULATORY INFORMATION

International Inventories TSCA All components of this product are either listed or are exempt on the TSCA inventory. DSL Substances comply or are exempt

Page 7 of 9 WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

Legend TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List U.S. Federal Regulations Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372: Chemical Name CAS-No Weight % SARA 313 - Threshold Values %

SARA 311/312 Hazard Categories Acute Health Hazard Yes Chronic Health Hazard Yes Fire Hazard Yes Sudden Release of Pressure Hazard Yes Reactive Hazard No Clean Water Act CWA - Reportable CWA - Hazardous Chemical Name CWA - Toxic Pollutants CWA - Priority Pollutants Quantities Substances

CERCLA

Chemical Name Hazardous Substances RQs Extremely Hazardous Substances RQs RQ

U.S. State Regulations

California Proposition 65 Ethyl alcohol is only considered a Proposition 65 developmental hazard when it is ingested as an alcoholic beverage. Chemical Name CAS-No California Prop. 65 Ethyl alcohol 64-17-5 Developmental

U.S. State Right-to-Know Regulations

Chemical Name New Jersey Massachusetts Pennsylvania Illinois Rhode Island Ethyl alcohol X X X -

U.S. EPA Label Information

EPA Pesticide Registration Number Not applicable 16. OTHER INFORMATION NFPA Health Hazard 2 Flammability 4 Instability 0 Physical and Chemical Hazards

HMIS Health Hazard 2* Flammability 4 Physical Hazard 0 Personal Protection X

Page 8 of 9 WPS-CHI-011 Customer Name Here Revision Date 1/31/2017

*Indicates a chronic health hazard.

Prepared By Chicago Aerosol 1300 North St Coal City, IL 60416 1-800-572-6501 Issuing Date 21-Apr-15 Revision Date 21-Apr-15 Revision Note Initial Release.

General Disclaimer The information provided on this SDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text End of Safety Data Sheeet

Page 9 of 9 Eleven Give Me Hold Strong Hairspray

Eleven Australia Pty Ltd Chemwatch Hazard Alert Code: 4 Chemwatch: 46-2405 Issue Date: 11/12/2014 Version No: 2.1.1.1 Print Date: 23/05/2016 Safety Data Sheet according to WHS and ADG requirements Initial Date: Not Available S.GHS.AUS.EN

SECTION 1 IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING

Product Identifier

Product name Eleven Give Me Hold Strong Hairspray Synonyms Not Available Proper shipping name AEROSOLS Other means of Not Available identification

Relevant identified uses of the substance or mixture and uses advised against

SDS are intended for use in the workplace. For domestic-use products, refer to consumer labels. Relevant identified uses Application is by spray atomisation from a hand held aerosol pack Hair styling product.

Details of the supplier of the safety data sheet

Registered company name Eleven Australia Pty Ltd Address 7 Endeavour Way Sunshine West VIC 3020 Australia Telephone 1800 104 204 Fax +61 3 9314 9211 Website Not Available Email Not Available

Emergency telephone number

Association / Organisation Not Available Emergency telephone Not Available numbers Other emergency telephone Not Available numbers

SECTION 2 HAZARDS IDENTIFICATION

Classification of the substance or mixture

HAZARDOUS CHEMICAL. DANGEROUS GOODS. According to the WHS Regulations and the ADG Code.

CHEMWATCH HAZARD RATINGS Min Max Flammability 4 Toxicity 0 0 = Minimum Body Contact 2 1 = Low 2 = Moderate Reactivity 1 3 = High Chronic 0 4 = Extreme

Poisons Schedule Not Applicable

Classification [1] Aerosols Category 1, Eye Irritation Category 2A Legend: 1. Classified by Chemwatch; 2. Classification drawn from HSIS ; 3. Classification drawn from EC Directive 1272/2008 - Annex VI

Label elements

GHS label elements

SIGNAL WORD DANGER

Continued... Chemwatch: 46-2405 Page 2 of 8 Issue Date: 11/12/2014 Version No: 2.1.1.1 Eleven Give Me Hold Strong Hairspray Print Date: 23/05/2016

Hazard statement(s)

H222 Extremely flammable aerosol. H319 Causes serious eye irritation. AUH044 Risk of explosion if heated under confinement

Precautionary statement(s) Prevention

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P211 Do not spray on an open flame or other ignition source. P251 Pressurized container: Do not pierce or burn, even after use. P280 Wear protective gloves/protective clothing/eye protection/face protection.

Precautionary statement(s) Response

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention.

Precautionary statement(s) Storage

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Precautionary statement(s) Disposal Not Applicable

SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS

Substances See section below for composition of Mixtures

Mixtures

CAS No %[weight] Name 64-17-5 50-60 ethanol 68476-85-7. 30-40 hydrocarbon propellant

SECTION 4 FIRST AID MEASURES

Description of first aid measures

If aerosols come in contact with the eyes: Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Eye Contact Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Transport to hospital or doctor without delay. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. Wipe off excess with absorbent tissue or towel. Skin Contact Wash with soap and water. If aerosols, fumes or combustion products are inhaled: Remove to fresh air. Lay patient down. Keep warm and rested. Inhalation Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. If breathing is shallow or has stopped, ensure clear airway and apply resuscitation, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor. Ingestion Not considered a normal route of entry.

Indication of any immediate medical attention and special treatment needed Treat symptomatically.

SECTION 5 FIREFIGHTING MEASURES

Extinguishing media SMALL FIRE: Water spray, dry chemical or CO2 LARGE FIRE: Water spray or fog.

Special hazards arising from the substrate or mixture

Fire Incompatibility Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may result

Advice for firefighters

Alert Fire Brigade and tell them location and nature of hazard. May be violently or explosively reactive. Fire Fighting Wear breathing apparatus plus protective gloves. Prevent, by any means available, spillage from entering drains or water course.

Continued... Chemwatch: 46-2405 Page 3 of 8 Issue Date: 11/12/2014 Version No: 2.1.1.1 Eleven Give Me Hold Strong Hairspray Print Date: 23/05/2016

If safe, switch off electrical equipment until vapour fire hazard removed. Use water delivered as a fine spray to control fire and cool adjacent area. DO NOT approach containers suspected to be hot. Liquid and vapour are highly flammable. Severe fire hazard when exposed to heat or flame. Vapour forms an explosive mixture with air. Severe explosion hazard, in the form of vapour, when exposed to flame or spark. Fire/Explosion Hazard Vapour may travel a considerable distance to source of ignition. Heating may cause expansion or decomposition with violent container rupture. Aerosol cans may explode on exposure to naked flames. Other combustion products include:, carbon dioxide (CO2), other pyrolysis products typical of burning organic material

SECTION 6 ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Wear protective clothing, impervious gloves and safety glasses. Minor Spills Shut off all possible sources of ignition and increase ventilation. Wipe up. If safe, damaged cans should be placed in a container outdoors, away from all ignition sources, until pressure has dissipated. Undamaged cans should be gathered and stowed safely. Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard. May be violently or explosively reactive. Wear breathing apparatus plus protective gloves. Major Spills Prevent, by any means available, spillage from entering drains or water courses No smoking, naked lights or ignition sources. Increase ventilation. Stop leak if safe to do so.

Personal Protective Equipment advice is contained in Section 8 of the SDS.

SECTION 7 HANDLING AND STORAGE

Precautions for safe handling

None required when handling small quantities. OTHERWISE: Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Safe handling Use in a well-ventilated area. Prevent concentration in hollows and sumps. DO NOT enter confined spaces until atmosphere has been checked. Avoid smoking, naked lights or ignition sources. Avoid contact with incompatible materials. Keep dry to avoid corrosion of cans. Corrosion may result in container perforation and internal pressure may eject contents of can Store in original containers in approved flammable liquid storage area. DO NOT store in pits, depressions, basements or areas where vapours may be trapped. Other information No smoking, naked lights, heat or ignition sources. Keep containers securely sealed. Contents under pressure. Store away from incompatible materials. Store in a cool, dry, well ventilated area.

Conditions for safe storage, including any incompatibilities

Aerosol dispenser. Suitable container Check that containers are clearly labelled. Storage incompatibility Avoid storage with oxidisers

SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION

Control parameters

OCCUPATIONAL EXPOSURE LIMITS (OEL) INGREDIENT DATA Source Ingredient Material name TWA STEL Peak Notes Australia Exposure Standards ethanol Ethyl alcohol 1880 mg/m3 / 1000 ppm Not Available Not Available Not Available Australia Exposure Standards hydrocarbon propellant LPG (liquified petroleum gas) 1800 mg/m3 / 1000 ppm Not Available Not Available Not Available

EMERGENCY LIMITS Ingredient Material name TEEL-1 TEEL-2 TEEL-3 ethanol Ethyl alcohol; (Ethanol) Not Available Not Available Not Available hydrocarbon propellant Liquified petroleum gas; (L.P.G.) 3,000 ppm 3200 ppm 19000 ppm

Ingredient Original IDLH Revised IDLH ethanol 15,000 ppm 3,300 [LEL] ppm

Continued... Chemwatch: 46-2405 Page 4 of 8 Issue Date: 11/12/2014 Version No: 2.1.1.1 Eleven Give Me Hold Strong Hairspray Print Date: 23/05/2016

hydrocarbon propellant 19,000 [LEL] ppm 2,000 [LEL] ppm

Exposure controls

None required when handling small quantities. OTHERWISE: Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed engineering controls can be highly effective in protecting workers and will typically be independent of worker interactions to provide this high level of protection. Appropriate engineering The basic types of engineering controls are: controls Process controls which involve changing the way a job activity or process is done to reduce the risk. Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation that strategically "adds" and "removes" air in the work environment. Ventilation can remove or dilute an air contaminant if designed properly. The design of a ventilation system must match the particular process and chemical or contaminant in use. Employers may need to use multiple types of controls to prevent employee overexposure.

Personal protection

No special equipment for minor exposure i.e. when handling small quantities. OTHERWISE: Safety glasses with side shields. Eye and face protection Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lenses or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first-aid personnel should be trained in their removal and suitable equipment should be readily available. In the event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Skin protection See Hand protection below No special equipment needed when handling small quantities. OTHERWISE: For potentially moderate exposures: Hands/feet protection Wear general protective gloves, eg. light weight rubber gloves. For potentially heavy exposures: Wear chemical protective gloves, eg. PVC. and safety footwear. Body protection See Other protection below No special equipment needed when handling small quantities. OTHERWISE: Overalls. Other protection Skin cleansing cream. Eyewash unit. Do not spray on hot surfaces. Thermal hazards Not Available

Recommended material(s) Respiratory protection GLOVE SELECTION INDEX Type AX Filter of sufficient capacity. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Glove selection is based on a modified presentation of the: Z88 or national equivalent) "Forsberg Clothing Performance Index". Selection of the Class and Type of respirator will depend upon the level of breathing zone The effect(s) of the following substance(s) are taken into account in the computer- contaminant and the chemical nature of the contaminant. Protection Factors (defined as the generated selection: ratio of contaminant outside and inside the mask) may also be important. Eleven Give Me Hold Strong Hairspray Required Maximum gas/vapour Half-face Full-Face Material CPI minimum concentration present in air Respirator Respirator BUTYL C protection factor p.p.m. (by volume) NATURAL RUBBER C up to 10 1000 AX-AUS / - Class1 NATURAL+NEOPRENE C up to 50 1000 - AX-AUS / NEOPRENE C Class 1 NITRILE C up to 50 5000 Airline * - NITRILE+PVC C up to 100 5000 - AX-2 PE/EVAL/PE C up to 100 10000 - AX-3 PVC C 100+ Airline**

* CPI - Chemwatch Performance Index * - Continuous Flow ** - Continuous-flow or positive pressure demand A: Best Selection A(All classes) = Organic vapours, B AUS or B1 = Acid gasses, B2 = Acid gas or hydrogen B: Satisfactory; may degrade after 4 hours continuous immersion cyanide(HCN), B3 = Acid gas or hydrogen cyanide(HCN), E = Sulfur dioxide(SO2), G = C: Poor to Dangerous Choice for other than short term immersion Agricultural chemicals, K = Ammonia(NH3), Hg = Mercury, NO = Oxides of nitrogen, MB = NOTE: As a series of factors will influence the actual performance of the glove, a final Methyl bromide, AX = Low boiling point organic compounds(below 65 degC) selection must be based on detailed observation. - * Where the glove is to be used on a short term, casual or infrequent basis, factors such as "feel" or convenience (e.g. disposability), may dictate a choice of gloves which might otherwise be unsuitable following long-term or frequent use. A qualified practitioner should be consulted.

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties

Appearance 22aer Clear spray with a pleasant odour; does not mix with water.

Continued... Chemwatch: 46-2405 Page 5 of 8 Issue Date: 11/12/2014 Version No: 2.1.1.1 Eleven Give Me Hold Strong Hairspray Print Date: 23/05/2016

Physical state Liquid Relative density (Water = 1) Not Available Partition coefficient Odour Not Available Not Available n-octanol / water Auto-ignition temperature Odour threshold Not Available Not Available (°C) Decomposition pH (as supplied) Not Applicable Not Available temperature Melting point / freezing Not Available Viscosity (cSt) Not Available point (°C) Initial boiling point and Not Available Molecular weight (g/mol) Not Applicable boiling range (°C) Flash point (°C) Not Available Taste Not Available Evaporation rate Not Available Explosive properties Not Available Flammability Not Available Oxidising properties Not Available Surface Tension (dyn/cm or Upper Explosive Limit (%) Not Available Not Available mN/m) Lower Explosive Limit (%) Not Available Volatile Component (%vol) Not Available Vapour pressure (kPa) Not Available Gas group Not Available Solubility in water (g/L) Immiscible pH as a solution (1%) Not Applicable Vapour density (Air = 1) Not Available VOC g/L Not Available

SECTION 10 STABILITY AND REACTIVITY

Reactivity See section 7 Elevated temperatures. Presence of open flame. Chemical stability Product is considered stable. Hazardous polymerisation will not occur. Possibility of hazardous See section 7 reactions Conditions to avoid See section 7 Incompatible materials See section 7 Hazardous decomposition See section 5 products

SECTION 11 TOXICOLOGICAL INFORMATION

Information on toxicological effects

Inhalation hazard is increased at higher temperatures. Inhalation of high concentrations of gas/vapour causes lung irritation with coughing and nausea, central nervous depression with headache and dizziness, Inhaled slowing of reflexes, fatigue and inco-ordination. WARNING:Intentional misuse by concentrating/inhaling contents may be lethal. Not normally a hazard due to physical form of product. Ingestion Considered an unlikely route of entry in commercial/industrial environments Ingestion may result in nausea, abdominal irritation, pain and vomiting Not considered an irritant through normal use. Skin Contact The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin. Spray mist may produce discomfort Eye The material may produce severe irritation to the eye causing pronounced inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis. Principal routes of exposure are by accidental skin and eye contact and by inhalation of vapours especially at higher temperatures. As with any chemical product, contact with unprotected bare skin; inhalation of vapour, mist or dust in work place atmosphere; or ingestion in any form, should be Chronic avoided by observing good occupational work practice. WARNING: Aerosol containers may present pressure related hazards.

Eleven Give Me Hold TOXICITY IRRITATION Strong Hairspray Not Available Not Available

TOXICITY IRRITATION

Dermal (rabbit) LD50: 17100 mg/kg[1] Eye (rabbit): 500 mg SEVERE

ethanol Inhalation (rat) LC50: 64000 ppm/4h[2] Eye (rabbit):100mg/24hr-moderate

Oral (rat) LD50: >1187-2769 mg/kg[1] Skin (rabbit):20 mg/24hr-moderate Skin (rabbit):400 mg (open)-mild

TOXICITY IRRITATION

Inhalation (mouse) LC50: >15.6-<17.9 mm/l2 h mm/l2="">[1] Not Available hydrocarbon propellant Inhalation (mouse) LC50: >15.6-<17.9 mm/l2 h mm/l2="">[1]

Continued... Chemwatch: 46-2405 Page 6 of 8 Issue Date: 11/12/2014 Version No: 2.1.1.1 Eleven Give Me Hold Strong Hairspray Print Date: 23/05/2016

Inhalation (mouse) LC50: 410000 ppm2 h[1]

Inhalation (mouse) LC50: 410000 ppm2 h[1]

Inhalation (rat) LC50: >800000 ppm15 min[1]

Inhalation (rat) LC50: >800000 ppm15 min[1]

Inhalation (rat) LC50: 1354.944 mg/L15 min[1]

Inhalation (rat) LC50: 1355 mg/l15 min[1]

Inhalation (rat) LC50: 1442.738 mg/L15 min[1]

Inhalation (rat) LC50: 1442.738 mg/L15 min[1]

Inhalation (rat) LC50: 1443 mg/l15 min[1]

Inhalation (rat) LC50: 1443 mg/l15 min[1]

Inhalation (rat) LC50: 570000 ppm15 min[1]

Legend: 1. Value obtained from Europe ECHA Registered Substances - Acute toxicity 2.* Value obtained from manufacturer's SDS. Unless otherwise specified data extracted from RTECS - Register of Toxic Effect of chemical Substances

The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, ETHANOL scaling and thickening of the skin. HYDROCARBON No significant acute toxicological data identified in literature search. PROPELLANT inhalation of the gas

Acute Toxicity Carcinogenicity Skin Irritation/Corrosion Reproductivity Serious Eye STOT - Single Exposure Damage/Irritation Respiratory or Skin STOT - Repeated Exposure sensitisation Mutagenicity Aspiration Hazard Legend: – Data available but does not fill the criteria for classification – Data required to make classification available – Data Not Available to make classification

SECTION 12 ECOLOGICAL INFORMATION

Toxicity

Ingredient Endpoint Test Duration (hr) Species Value Source ethanol EC50 24 Algae or other aquatic plants 0.0129024mg/L 4 ethanol EC50 48 Crustacea 2mg/L 4 ethanol LC50 96 Fish 42mg/L 4 ethanol NOEC 2016 Fish 0.000375mg/L 4 ethanol EC50 72 Algae or other aquatic plants 275mg/L 2 hydrocarbon propellant LC50 96 Fish 24.11mg/L 2 hydrocarbon propellant EC50 96 Algae or other aquatic plants 7.71mg/L 2 hydrocarbon propellant EC50 96 Algae or other aquatic plants 8.57mg/L 2 hydrocarbon propellant LC50 96 Fish 24.11mg/L 2 hydrocarbon propellant EC50 96 Algae or other aquatic plants 7.71mg/L 2 hydrocarbon propellant EC50 96 Algae or other aquatic plants 8.57mg/L 2 Extracted from 1. IUCLID Toxicity Data 2. Europe ECHA Registered Substances - Ecotoxicological Information - Aquatic Toxicity 3. EPIWIN Suite V3.12 - Legend: Aquatic Toxicity Data (Estimated) 4. US EPA, Ecotox database - Aquatic Toxicity Data 5. ECETOC Aquatic Hazard Assessment Data 6. NITE (Japan) - Bioconcentration Data 7. METI (Japan) - Bioconcentration Data 8. Vendor Data

Persistence and degradability

Ingredient Persistence: Water/Soil Persistence: Air ethanol LOW (Half-life = 2.17 days) LOW (Half-life = 5.08 days)

Bioaccumulative potential

Ingredient Bioaccumulation ethanol LOW (LogKOW = -0.31)

Mobility in soil

Ingredient Mobility ethanol HIGH (KOC = 1)

Continued... Chemwatch: 46-2405 Page 7 of 8 Issue Date: 11/12/2014 Version No: 2.1.1.1 Eleven Give Me Hold Strong Hairspray Print Date: 23/05/2016

SECTION 13 DISPOSAL CONSIDERATIONS

Waste treatment methods

Consult State Land Waste Management Authority for disposal. Discharge contents of damaged aerosol cans at an approved site. Product / Packaging Allow small quantities to evaporate. disposal DO NOT incinerate or puncture aerosol cans. Bury residues and emptied aerosol cans at an approved site.

SECTION 14 TRANSPORT INFORMATION

Labels Required

Marine Pollutant NO HAZCHEM Not Applicable

Land transport (ADG)

UN number 1950 Packing group Not Applicable UN proper shipping name AEROSOLS Environmental hazard Not Applicable

Class 2.1 Transport hazard class(es) Subrisk Not Applicable

Special provisions 63 190 277 327 344 Special precautions for user Limited quantity 1000ml

Air transport (ICAO-IATA / DGR)

UN number 1950 Packing group Not Applicable UN proper shipping name Aerosols Environmental hazard Not Applicable

ICAO/IATA Class 2.1 Transport hazard class(es) ICAO / IATA Subrisk Not Applicable ERG Code 10L

Special provisions A145A167A802; A1A145A167A802 Cargo Only Packing Instructions 203 Cargo Only Maximum Qty / Pack 150 kg Special precautions for user Passenger and Cargo Packing Instructions 203; Forbidden Passenger and Cargo Maximum Qty / Pack 75 kg; Forbidden Passenger and Cargo Limited Quantity Packing Instructions Y203; Forbidden Passenger and Cargo Limited Maximum Qty / Pack 30 kg G; Forbidden

Sea transport (IMDG-Code / GGVSee)

UN number 1950 Packing group Not Applicable UN proper shipping name AEROSOLS Environmental hazard Not Applicable

IMDG Class 2.1 Transport hazard class(es) IMDG Subrisk Not Applicable

EMS Number F-D, S-U Special precautions for user Special provisions 63 190 277 327 344 959 Limited Quantities 1000ml

Continued... Chemwatch: 46-2405 Page 8 of 8 Issue Date: 11/12/2014 Version No: 2.1.1.1 Eleven Give Me Hold Strong Hairspray Print Date: 23/05/2016

Transport in bulk according to Annex II of MARPOL and the IBC code Not Applicable

SECTION 15 REGULATORY INFORMATION

Safety, health and environmental regulations / legislation specific for the substance or mixture

ETHANOL(64-17-5) IS FOUND ON THE FOLLOWING REGULATORY LISTS Australia Exposure Standards Australia Inventory of Chemical Substances (AICS) Australia Hazardous Substances Information System - Consolidated Lists

HYDROCARBON PROPELLANT(68476-85-7.) IS FOUND ON THE FOLLOWING REGULATORY LISTS Australia Exposure Standards Australia Inventory of Chemical Substances (AICS) Australia Hazardous Substances Information System - Consolidated Lists International Air Transport Association (IATA) Dangerous Goods Regulations - Prohibited List Passenger and Cargo Aircraft

National Inventory Status Australia - AICS Y Canada - DSL Y Canada - NDSL N (ethanol; hydrocarbon propellant) China - IECSC Y Europe - EINEC / ELINCS / Y NLP Japan - ENCS N (hydrocarbon propellant) Korea - KECI Y New Zealand - NZIoC Y Philippines - PICCS Y USA - TSCA Y Y = All ingredients are on the inventory Legend: N = Not determined or one or more ingredients are not on the inventory and are not exempt from listing(see specific ingredients in brackets)

SECTION 16 OTHER INFORMATION

Other information

Ingredients with multiple cas numbers

Name CAS No hydrocarbon propellant 68476-85-7., 68476-86-8.

Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch Classification committee using available literature references. A list of reference resources used to assist the committee may be found at: www.chemwatch.net

The SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks in the workplace or other settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of use and current or available engineering controls must be considered.

Definitions and abbreviations PC－TWA: Permissible Concentration-Time Weighted Average PC－STEL: Permissible Concentration-Short Term Exposure Limit IARC: International Agency for Research on Cancer ACGIH: American Conference of Governmental Industrial Hygienists STEL: Short Term Exposure Limit TEEL: Temporary Emergency Exposure Limit。 IDLH: Immediately Dangerous to Life or Health Concentrations OSF: Odour Safety Factor NOAEL :No Observed Adverse Effect Level LOAEL: Lowest Observed Adverse Effect Level TLV: Threshold Limit Value LOD: Limit Of Detection OTV: Odour Threshold Value BCF: BioConcentration Factors BEI: Biological Exposure Index

This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written permission from CHEMWATCH. TEL (+61 3) 9572 4700.

end of SDS Page 1 of 6 Quality manufacturers of bath & body care products – made in Australia SAFETY DATA SHEET According to Regulation (EC) no. 1907/2006

SECTION 1: Identification of the substance/mixture & of the Company/ Undertaking of the substance/mixture and of the company/undertaking 1.1 Product Name: Hand and Body Lotion

1.2 Application of the substance/mixture: Hand and Body Lotion. For external use only.

1.3 Details of the Manufacturer / Distributor: Natural Beauty Care Pty Ltd Eleven Australia Pty Ltd 8 Teton Court, 7 Endeavour Way, Highett, Victoria Sunshine West, Victoria 3190, Australia. 3020, Australia.

1.4 Emergency telephone number: +61 3 9553 0733 Facsimile Number: +61 3 9553 4988

1.5 POISON INFORMATION CENTRE: 13 11 26 (Australia)

SECTION 2: Hazard Identification

Not classified as Dangerous goods by the criteria of the Australian Dangerous goods code (ADG) for Transport and Rail. NON-DANGEROUS GOODS.

This material is a personal care product that is safe for consumers with intended and foreseeable use. This product is non- hazardous according to Work Safe Australia.

Classification of the substance or mixture (Classification according to Regulation (EC) No 1272/2008): Nil Classification according to the Directive 67/548/EEC or Directive 1999/45/EC: Not regulated

Signal word: Not relevant

Hazard statements: Not relevant

Precautionary statements: P101 If medical advice is needed, have product container or label at hand P102 Keep out of reach of children P103 Read label before use

Page 2 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 3: Composition/formulation on ingredients

Name of Chemical CAS Number Percentage

w/w Water (Aqua) 7732-18-5 > 80-90 Isopropyl Myristate 110-27-0 < 10 Glycerin 56-81-5 < 5 Glyceryl Stearate SE 11099-07-3 < 5 Cetearyl Alcohol 67762-27-0 < 5 Dimethicone 9006-65-9 < 5 Natural oils and extracts - < 5 Stearic Acid 57-11-4 < 5 Fragrance (Parfum) - < 1 Phenoxyethanol 122-99-6 < 1 Ethylhexylglycerin 70445-33-9 < 0.5 Citric Acid 5949-29-1 < 0.5 Triethanolamine 102-71-6 < 0.5 Acrylates/C10-30 Alkyl Acrylate Crosspolymer - < 0.5 Tocopheryl Acetate 7695-91-2 < 0.5 Benzyl Alcohol 100-51-6 < 0.5 Disodium EDTA 139-33-3 < 0.5

SECTION 4: First Aid Measures

4.1 Description of first aid measures General information: No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. HEALTH EFFECTS: Acute - Swallowed May be harmful if large amounts are swallowed Acute - Eye Full strength material may be irritating to eyes Acute - Skin Not considered an irritant through normal use. Full strength material in repeated or prolonged contact with skin may be irritating and cause allergic reactions in sensitive individuals Acute - Inhaled Full strength material should not cause any irritation to the mucous membrane and upper airways

Page 3 of 6 Quality manufacturers of bath & body care products – made in Australia

FIRST AID: Swallowed Do not induce vomiting, Give plenty of water and seek medical advice Eye Flush eye with copious amounts of water for 15 minutes including under eyelid. If discomfit persists, obtain medical advice. Skin Remove contaminated clothing. Wash affected areas with warm soapy water

Inhaled Remove to fresh uncontaminated air, lay patient on back until breathing returns to normal

4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available.

SECTION 5: Firefighting Measures

5.1 Suitable Extinguishing media: Carbon dioxide, Foam, Dry Chemical

5.2 Special hazards arising from the substance or mixture: No further relevant information available.

5.3 Advice for firefighters: Wear Protective equipment. Do not inhale explosion gases or combustion gases. Hazchem Code: Not applicable.

SECTION 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures: Remove all sources of ignition. Increase ventilation. Evacuate all personnel. Wear sufficient respiratory protection and full protective clothing to minimise skin and eye exposure. If possible contain the spill.

6.2 Environmental precautions: No special measures required.

6.3 Methods and material for containment and cleaning up: Slippery when spilt. Clean up immediately. Wear protective equipment to avoid eye contact. Contain – prevent run off into drains and waterways. Use absorbent material. Collect and seal on properly labelled containers for disposal. If large quantities of this material enter the waterways, contact the Environmental Protection Authority or you local Waste Management Authority.

6.4 Reference to other sections: See Section 7 for information on safe handling.

Page 4 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 7: Handling & Storage

7.1 Precautions for safe handling None required when handling small quantities. Avoid contact with eyes. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing.

Information about fire - and explosion protection: No special measures required.

7.2 Conditions for safe storage, including any incompatibilities: Store below 30C if in original containers. Store in a cool dry well ventilated area. Store away from Incompatible materials.

7.3 Specific end use(s) No further relevant information available.

SECTION 8: Exposure Controls /Personal Protection:

Additional information about design of technical facilities: No further data; see item 7.

8.1 Control parameters: No value assigned for this specific material

8.2 Appropriate engineering controls: Non-required

8.3 Personal Protection: None required when handling small quantities. Avoid contact with eyes. Do not ingest. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing. Some sensitive individuals may develop an allergic response.

National Exposure Standards: No exposure standards have been established for this material by Work Safe Australia. Biological Limit Values: No biological limit allowed.

SECTION 9: Physical & Chemical Properties Appearance: Thick smooth cream Colour: White Odour: Characteristic aroma of aloe & cucumber Odour threshold: Not determined. pH: 5.5 -6.0 Flash point: Not available Melting point/Melting range: Not determined Boiling point/Boiling range: Not determined. Danger of explosion: Product does not present an explosion hazard. Self-igniting: Product is not self - igniting. Solubility in / Miscibility with water: Soluble. Density at 20 °C: 0.90-1.04 g/cm³ Vapour density Not applicable. Vapour pressure: Not applicable.

SECTION 10: Stability & Reactivity

10.1 Reactivity: No further relevant information available. 10.2 Chemical stability: Stable under normal handling and storage conditions. Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid No further relevant information available. Page 5 of 6 Quality manufacturers of bath & body care products – made in Australia

10.5 Incompatible materials: No further relevant information available. 10.6 Hazardous decomposition products: None under normal conditions of storage and use.

SECTION 11: Toxicology Information

11.1 Information on toxicological effects: No adverse health effects expected if the product is handled in accordance with this safety data sheet and the product label. Product is safe for its intended use based on the formulation, testing results and the history of safe consumer use.

Acute toxicity: No LD50 data available for this product

Primary irritant effect: On the skin: No irritant effect On the eye: No irritating effect Carcinogen Classification: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed carcinogen by IARC

SECTION 12: Ecological Information

12.1 Ecotoxicity: Avoid contaminating waterways

12.2 Persistence/degradability: No tested data available on this product.

12.3 Bioaccumulative potential: This product shows a low bioaccumulation potential

12.4 Mobility: Prevent contamination of soil, ground and surface water.

Section 13: Disposals Consideration

Disposal Methods: Refer to Waste Management Authority. Dispose of contents/containers in accordance with local/regional/national/international regulations.

SECTION 14: Transport Information

ADG 7.3 Land Transport of Dangerous Goods Labels required: No special requirements UN Number: N/A Proper Shipping Name: N/A DG Class: N/A Subsidiary Risk: None Packing Group: N/A HAZCHEM Code: N/A Special Provision: N/A Page 6 of 6 Quality manufacturers of bath & body care products – made in Australia

MARITIME TRANSPORTATION AIR TRANSPORTATION IMCD IATA Dangerous Goods Regulations (DGR) 56th Edition 2015 IMCD: N/A ICAO/IATA Class: N/A Label: N/A Label: N/A UN Number: N/A UN Number: N/A Packaging Group: Not allocated Packaging Group: N/A EMS Number: N/A Marine Pollutant: Not allocated Proper Shipping Name: As above Proper Shipping Name: As above Special Provisions; N/A Special Provisions; N/A

SECTION 15: Regulatory Information

POISONS SCHEDULE (SUSMP): Not subject to labelling

All ingredients in this product are compliant with NICNAS AICS: regulations

SECTION 16: OTHER INFORMATION

The information herein is accurate to the best of our knowledge. However, it is meant to describe safety requirements of our products, thus this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. No warranty is expressed or made as to this document’s accuracy, reliability or completeness. User has the sole responsibility to determine the suitability of the materials for any use and the manner of use contemplated.

Relevant phrases Non relevant

Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) AICS: Australian Inventory of Chemical substances NICNAS: National Industrial Chemical Notification & Assessment Scheme IARC: International Agency for Research Cancer

MSDS prepared by: Natural Beauty Care Pty. Ltd. Issue Date: 14/06/2016 Revision Number: 1 END OF MSDS Page 1 of 6 Quality manufacturers of bath & body care products – made in Australia SAFETY DATA SHEET According to Regulation (EC) no. 1907/2006

SECTION 1: Identification of the substance/mixture & of the Company/ Undertaking of the substance/mixture and of the company/undertaking 1.1 Product Name: Wash Me All Over Hand and Body Wash

1.2 Application of the substance/mixture: Hand and Body Wash. For external use only.

1.3 Details of the Manufacturer / Distributor: Natural Beauty Care Pty Ltd Eleven Australia Pty Ltd 8 Teton Court, 7 Endeavour Way, Highett, Victoria Sunshine West, Victoria 3190, Australia. 3020, Australia.

1.4 Emergency telephone number: +61 3 9553 0733 Facsimile Number: +61 3 9553 4988

1.5 POISON INFORMATION CENTRE: 13 11 26 (Australia)

SECTION 2: Hazard Identification

Not classified as Dangerous goods by the criteria of the Australian Dangerous goods code (ADG) for Transport and Rail. NON-DANGEROUS GOODS.

This material is a personal care product that is safe for consumers with intended and foreseeable use. This product is non- hazardous according to Work Safe Australia.

Classification of the substance or mixture (Classification according to Regulation (EC) No 1272/2008): Nil Classification according to the Directive 67/548/EEC or Directive 1999/45/EC: Not regulated

Signal word: Not relevant

Hazard statements: Not relevant

Precautionary statements: P101 If medical advice is needed, have product container or label at hand P102 Keep out of reach of children P103 Read label before use

Page 2 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 3: Composition/formulation on ingredients

Name of Chemical CAS Number Percentage

w/w

Water (Aqua) 7732-18-5 > 60-70 Ammonium Lauryl Sulfate 2235-54-3 < 10 Cocamide DEA 68603-42-9 < 5 Cocamidopropyl Betaine 61789-40-0 < 5 Natural oils and extracts - < 1 Citric Acid 77-92-9 < 0.5 Potassium Sorbate 24634-61-5 < 0.5 Phenoxyethanol 122-99-6 < 0.5 Sodium Chloride 7647-14-5 < 0.5 Ascorbic Acid 50-81-7 < 0.5

SECTION 4: First Aid Measures

4.1 Description of first aid measures General information: No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. HEALTH EFFECTS: Acute - Swallowed May be harmful if large amounts are swallowed Acute - Eye Full strength material may be irritating to eyes Acute - Skin Not considered an irritant through normal use. Full strength material in repeated or prolonged contact with skin may be irritating and cause allergic reactions in sensitive individuals Acute - Inhaled Full strength material should not cause any irritation to the mucous membrane and upper airways

FIRST AID: Swallowed Do not induce vomiting, Give plenty of water and seek medical advice Eye Flush eye with copious amounts of water for 15 minutes including under eyelid. If discomfit persists, obtain medical advice. Skin Remove contaminated clothing. Wash affected areas with warm soapy water

Inhaled Remove to fresh uncontaminated air, lay patient on back until breathing returns to normal

Page 3 of 6 Quality manufacturers of bath & body care products – made in Australia

4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available.

SECTION 5: Firefighting Measures

5.1 Suitable Extinguishing media: Carbon dioxide, Foam, Dry Chemical

5.2 Special hazards arising from the substance or mixture: No further relevant information available.

5.3 Advice for firefighters: Wear Protective equipment. Do not inhale explosion gases or combustion gases. Hazchem Code: Not applicable.

SECTION 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures: Remove all sources of ignition. Increase ventilation. Evacuate all personnel. Wear sufficient respiratory protection and full protective clothing to minimise skin and eye exposure. If possible contain the spill.

6.2 Environmental precautions: No special measures required.

6.3 Methods and material for containment and cleaning up: Slippery when spilt. Clean up immediately. Wear protective equipment to avoid eye contact. Contain – prevent run off into drains and waterways. Use absorbent material. Collect and seal on properly labelled containers for disposal. If large quantities of this material enter the waterways, contact the Environmental Protection Authority or you local Waste Management Authority.

6.4 Reference to other sections: See Section 7 for information on safe handling.

SECTION 7: Handling & Storage

7.1 Precautions for safe handling None required when handling small quantities. Avoid contact with eyes. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing.

Information about fire - and explosion protection: No special measures required.

7.2 Conditions for safe storage, including any incompatibilities: Store below 30C if in original containers. Store in a cool dry well ventilated area. Store away from Incompatible materials.

7.3 Specific end use(s) No further relevant information available.

Page 4 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 8: Exposure Controls /Personal Protection:

Additional information about design of technical facilities: No further data; see item 7.

8.1 Control parameters: No value assigned for this specific material

8.2 Appropriate engineering controls: Non-required

8.3 Personal Protection: None required when handling small quantities. Avoid contact with eyes. Do not ingest. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing. Some sensitive individuals may develop an allergic response.

National Exposure Standards: No exposure standards have been established for this material by Work Safe Australia. Biological Limit Values: No biological limit allowed.

SECTION 9: Physical & Chemical Properties Appearance: Thick smooth Gel Colour: Clear Colourless Odour: Characteristic Odour threshold: Not determined. pH: 4.2-4.9 Flash point: Not available Melting point/Melting range: Not determined Boiling point/Boiling range: Not determined. Danger of explosion: Product does not present an explosion hazard. Self-igniting: Product is not self - igniting. Solubility in / Miscibility with water: Soluble. Density at 20 °C: 0.90-1.04 g/cm³ Vapour density Not applicable. Vapour pressure: Not applicable.

SECTION 10: Stability & Reactivity

10.1 Reactivity: No further relevant information available. 10.2 Chemical stability: Stable under normal handling and storage conditions. Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid No further relevant information available. 10.5 Incompatible materials: No further relevant information available. 10.6 Hazardous decomposition products: None under normal conditions of storage and use.

SECTION 11: Toxicology Information

11.1 Information on toxicological effects: No adverse health effects expected if the product is handled in accordance with this safety data sheet and the product label. Product is safe for its intended use based on the formulation, testing results and the history of safe consumer use.

Acute toxicity: No LD50 data available for this product

Primary irritant effect: On the skin: No irritant effect On the eye: No irritating effect Page 5 of 6 Quality manufacturers of bath & body care products – made in Australia

Carcinogen Classification: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed carcinogen by IARC

SECTION 12: Ecological Information

12.1 Ecotoxicity: Avoid contaminating waterways

12.2 Persistence/degradability: No tested data available on this product.

12.3 Bioaccumulative potential: This product shows a low bioaccumulation potential

12.4 Mobility: Prevent contamination of soil, ground and surface water.

Section 13: Disposals Consideration

Disposal Methods: Refer to Waste Management Authority. Dispose of contents/containers in accordance with local/regional/national/international regulations.

SECTION 14: Transport Information

ADG 7.3 Land Transport of Dangerous Goods Labels required: No special requirements UN Number: N/A Proper Shipping Name: N/A DG Class: N/A Subsidiary Risk: None Packing Group: N/A HAZCHEM Code: N/A Special Provision: N/A

MARITIME TRANSPORTATION AIR TRANSPORTATION IMCD IATA Dangerous Goods Regulations (DGR) 56th Edition 2015 IMCD: N/A ICAO/IATA Class: N/A Label: N/A Label: N/A UN Number: N/A UN Number: N/A Packaging Group: Not allocated Packaging Group: N/A EMS Number: N/A Marine Pollutant: Not allocated Proper Shipping Name: As above Proper Shipping Name: As above Special Provisions; N/A Special Provisions; N/A

Page 6 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 15: Regulatory Information

POISONS SCHEDULE (SUSMP): Not subject to labelling

All ingredients in this product are compliant with NICNAS AICS: regulations

SECTION 16: OTHER INFORMATION

The information herein is accurate to the best of our knowledge. However, it is meant to describe safety requirements of our products, thus this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. No warranty is expressed or made as to this document’s accuracy, reliability or completeness. User has the sole responsibility to determine the suitability of the materials for any use and the manner of use contemplated.

Relevant phrases Non relevant

Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) AICS: Australian Inventory of Chemical substances NICNAS: National Industrial Chemical Notification & Assessment Scheme IARC: International Agency for Research Cancer

MSDS prepared by: Natural Beauty Care Pty. Ltd. Issue Date: 14/06/2016 Revision Number: 1 END OF MSDS

Material Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name I Want Body Texture Spray

Catalog code

Use of the product Personal hair care product

Company Guangzhou Beaver Cosmetics Co., Ltd Add: No.5 Zhen Xing Rd., High-tech Industrial Park, Tai ping Development Zone, Cong Hua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773; 37940775; 37940779; Fax: 86-20-37940773-7210; Email: [email protected] Date 18/12/2015

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU), ALCOHOL DENAT, PEG-32, SILICA, PEG-8, PROPYLENE GLYCOL, DIAZOLIDINYL UREA, SODIUM LAURYL SULFATE, BENTONITE, SODIUM METHYL COCOYL TAURATE, MAGNESIUM ALUMINUM SILICATE, CITRIC ACID, AMINOMETHYL PROPANOL, PARFUM, COCODIMONIUM HYDROXYPROPYL HYDROLYZED KERATIN, HYDROLYZED KERATIN, HYDROLYZED WHEAT PROTEIN, HYDROLYZED CORN PROTEIN, HYDROLYZED SOY PROTEIN

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persists.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly.

Seek medical advice and show the label when possible.

Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces an extremely slippery surface, take precautions.

7. HANDLING AND STORAGE

Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance 上层水状液下层灰白色悬浊液

Colour : 灰白色（摇晃均匀）

pH value at 25oC : 6.5-7.5

Solubility in water : yes Specific gravity at 25oC : app. 0.95±0.05

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances.

Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water

Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS

Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose.

Safety Data Sheet

1. IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY / UNDERTAKING

Product name Hair Volumizing Powder

Catalog code ADLYB07020

Use of the product Personal hair styling product

Company Guangzhou Beaver Cosmetics Co., Ltd Add:No.5 Zhenxing Rd., High-tech Industrial Park, Taiping Development Zone, Conghua Dist., Guangzhou City, China

Telephone Tel: 86-20-37940773;37940775;37940779; Fax: 86-20-37940773-7210; Email: [email protected]

Emergency telephone In case of medical emergencies, please contact your local poisons Control center.

Date 28/2/2017

2. COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients: WATER(AQUA,EAU),SILICA, CHLORPHENESIN, VP/VA COPOLYMER, ALOE BARBADENSIS LEAF EXTRACT, TOCOPHERYL ACETATE

3. HAZARDS IDENTIFICATION

Specific Hazards : Possible fire hazard by product vapors ignition (additional information is given under section 7)

Potential Health effects : Please refer to section 11.

4. FIRST AID MEASURES

Eye contact : Make sure to remove contact lenses from the eyes before rinsing. Flush eyes immediately with plenty of water while occasionally lifting and lowering eyelids, for at least 15 minutes. Seek medical attention from a specialist if irritation persis.

Inhalation : Remove to fresh air.

Ingestion : Never make an unconscious person vomit or drink fluids! Rinse mouth thoroughly. Seek medical advice and show the label when possible. Skin Contact : Rinse skin with water and mild soap. Consult a physician if irritation persists.

5. FIRE-FIGHTING MEASURES

Flash Point : Not determined.

Autoignition Temperature : Not determined.

Flammability Limits in air : Not determined.

Extinguishing media : On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2) dry chemical or water spray. Water can be used to cool fire exposed containers.

Fire Fighting Measures : Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Use water spray to keep fire exposed containers cool. Determine the need to evacuate or isolate the area according to your local emergency plan.

Specific hazards : Fire or high temperatures may create carbon oxides and traces of incompletely burned carbon compounds.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Wear proper protective equipment. Observe all personal Protection equipment recommendations described in sections 8.

Environmental precautions : Prevent from spreading or entering into drains, ditches or waterways by using sand, earth or other appropriate barriers.

Clean up methods : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by embanking, etc... procedures. Avoid sparks, flames, heat and smoking. Ventilate. Mop, wipe or soak up with absorbent material and place in appropriate container. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur.

Further information : The spilled product produces a slippery surface, take precautions.

7. HANDLING AND STORAGE Handling : Use with adequate ventilation. Avoid eye contact. Avoid inhalation of vapors. Avoid all unnecessary exposure. Keep away from food, drink and animal dishes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking.

Storage : Keep only in the original glass bottles in a cool, well ventilated dry area and protect from light. Keep containers tightly closed when not in use.

Precautions : Static electricity will accumulate and may ignite vapors. Prevent a possible fire hazard by taking precautionary measures against static discharges. Keep container closed and away from heat, sparks and flame.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Personal protection

Respiratory protection : In case of inadequate ventilation use suitable respirator.

Hand protection : No specific hand protection noted, but gloves may still be advisable.

Eye protection : Wear approved safety goggles.

Hygiene measures : Exercise good hygiene practice. Wash after handling, especially before eating, drinking or smoking. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : Powder

Colour : White

pH value at 25oC : Not applicable

Solubility in water : Insoluble Specific gravity at 25oC : app. 1.0±0.1

10. STABILITY AND REACTIVITY

Stability : Stable under normal temperature conditions and recommended use.

Materials to avoid : Strong oxidizing substances. Hazardous decomposition Products : Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. 11. TOXICOLOGICAL INFORMATION

Potential Health effects

Inhalation : Inhalation is an unlikely route of exposure under normal temperature conditions and recommended use. Accidental inhalation of the product spray, is unlikely to cause irritation of the nose and upper respiratory tract.

Skin contact : May cause skin irritation. Repeated exposure to the product is unlikely to produce allergy by skin contact. Exposure to this product is unlikely to result in phototoxic effects.

Eye contact : Accidental exposure of the eye to the product may result in eye irritation.

Ingestion : Accidental ingestion of the product may cause irritation to the mouth and upper digestive tract.

Toxicological tests : No data is available regarding the finished product.

Additional information : Toxicological assessment of the finished product is available and will be sent upon request.

12. ECOLOGICAL INFORMATION

Environmental fate and distribution : Specific data regarding the finished product is not available. Complete information regarding the product ingredients is not yet available.

Environmental effects : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

Fate and effects in waste water Treatment plants : No data is available regarding the finished product. Complete information regarding the product ingredients is not yet available.

13. DISPOSAL CONSIDERATIONS Avoid releasing into the environment. Dispose of waste and residues in a safe manner, in accordance with local and national regulations.

14. TRANSPORT INFORMATION

General information

The product is not classified as dangerous goods for transport, according to the international regulation of the transport of dangerous goods (ADR/RID, IMDG and IATA-DGR)

Transportation by road or railway according to ADR and RID

Remarks : Not classified as dangerous goods according to ADR.

Transportation by vessels according to IMDG

Remarks : Not classified as dangerous goods according to IMDG.

Transportation by airplane according to IATA-DRG

Remarks : Not classified as dangerous goods according to IATA-DGR.

15. Regulatory information

Risk phrases : NC not classified.

Safety phrases : S25 Avoid contact with eyes. S51 Use only in well-ventilated areas.

16. OTHER INFORMATION

Further information : None.

This MSDS is intended to provide a brief summary of our knowledge and Guidance regarding the use of this material. The information contained here has been compiled from sources considered to be dependable and is accurate to the best of the company’s knowledge .It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is furnished upon condition that the person receiving it shall make his own determination of the suitability of the material for his particular purpose. ELEVEN MAKE ME SHINE SPRAY GLOSS

Ozdare Business Services Chemwatch Hazard Alert Code: 4 Chemwatch: 33-4543 Issue Date: 01/01/2013 Version No: 2.1.1.1 Print Date: 07/06/2016 Safety Data Sheet according to WHS and ADG requirements Initial Date: Not Available S.GHS.AUS.EN

SECTION 1 IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING

Product Identifier

Product name ELEVEN MAKE ME SHINE SPRAY GLOSS Proper shipping name AEROSOLS Other means of Not Available identification

Relevant identified uses of the substance or mixture and uses advised against

SDS are intended for use in the workplace. For domestic-use products, refer to consumer labels. Relevant identified uses Application is by spray atomisation from a hand held aerosol pack Hair styling product.

Details of the supplier of the safety data sheet

Registered company name Ozdare Business Services Address 7 Endeavour Way Sunshine West VIC 3020 Australia Telephone +61 3 9314 9099 Fax +61 3 9314 9211 Website Not Available Email Not Available

Emergency telephone number

Association / Organisation Not Available Emergency telephone Not Available numbers Other emergency telephone Not Available numbers

SECTION 2 HAZARDS IDENTIFICATION

Classification of the substance or mixture

HAZARDOUS CHEMICAL. DANGEROUS GOODS. According to the WHS Regulations and the ADG Code.

CHEMWATCH HAZARD RATINGS Min Max Flammability 4 Toxicity 0 0 = Minimum Body Contact 2 1 = Low 2 = Moderate Reactivity 1 3 = High Chronic 0 4 = Extreme

Poisons Schedule Not Applicable

Classification [1] Aerosols Category 1, Eye Irritation Category 2A Legend: 1. Classified by Chemwatch; 2. Classification drawn from HSIS ; 3. Classification drawn from EC Directive 1272/2008 - Annex VI

Label elements

GHS label elements

SIGNAL WORD DANGER

Hazard statement(s)

Continued... Chemwatch: 33-4543 Page 2 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN MAKE ME SHINE SPRAY GLOSS Print Date: 07/06/2016

H222 Extremely flammable aerosol. H319 Causes serious eye irritation. AUH044 Risk of explosion if heated under confinement

Precautionary statement(s) Prevention

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P211 Do not spray on an open flame or other ignition source. P251 Pressurized container: Do not pierce or burn, even after use. P280 Wear protective gloves/protective clothing/eye protection/face protection.

Precautionary statement(s) Response

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention.

Precautionary statement(s) Storage

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Precautionary statement(s) Disposal Not Applicable

SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS

Substances See section below for composition of Mixtures

Mixtures

CAS No %[weight] Name 64-17-5 30-60 ethanol NOTE: Manufacturer has supplied full ingredient information to allow CHEMWATCH assessment.

SECTION 4 FIRST AID MEASURES

Description of first aid measures

If aerosols come in contact with the eyes: Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Eye Contact Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Transport to hospital or doctor without delay. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. Wipe off excess with absorbent tissue or towel. Skin Contact Wash with soap and water. If aerosols, fumes or combustion products are inhaled: Remove to fresh air. Lay patient down. Keep warm and rested. Inhalation Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. If breathing is shallow or has stopped, ensure clear airway and apply resuscitation, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor. Ingestion Not considered a normal route of entry.

Indication of any immediate medical attention and special treatment needed Treat symptomatically.

SECTION 5 FIREFIGHTING MEASURES

Extinguishing media SMALL FIRE: Water spray, dry chemical or CO2 LARGE FIRE: Water spray or fog.

Special hazards arising from the substrate or mixture

Fire Incompatibility Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may result

Advice for firefighters

Alert Fire Brigade and tell them location and nature of hazard. May be violently or explosively reactive. Fire Fighting Wear breathing apparatus plus protective gloves. Prevent, by any means available, spillage from entering drains or water course.

Continued... Chemwatch: 33-4543 Page 3 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN MAKE ME SHINE SPRAY GLOSS Print Date: 07/06/2016

If safe, switch off electrical equipment until vapour fire hazard removed. Use water delivered as a fine spray to control fire and cool adjacent area. DO NOT approach containers suspected to be hot. Liquid and vapour are highly flammable. Severe fire hazard when exposed to heat or flame. Vapour forms an explosive mixture with air. Severe explosion hazard, in the form of vapour, when exposed to flame or spark. Fire/Explosion Hazard Vapour may travel a considerable distance to source of ignition. Heating may cause expansion or decomposition with violent container rupture. Aerosol cans may explode on exposure to naked flames. Other combustion products include:, carbon dioxide (CO2), other pyrolysis products typical of burning organic material

SECTION 6 ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Wear protective clothing, impervious gloves and safety glasses. Minor Spills Shut off all possible sources of ignition and increase ventilation. Wipe up. If safe, damaged cans should be placed in a container outdoors, away from all ignition sources, until pressure has dissipated. Undamaged cans should be gathered and stowed safely. Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard. May be violently or explosively reactive. Wear breathing apparatus plus protective gloves. Major Spills Prevent, by any means available, spillage from entering drains or water courses No smoking, naked lights or ignition sources. Increase ventilation. Stop leak if safe to do so.

Personal Protective Equipment advice is contained in Section 8 of the SDS.

SECTION 7 HANDLING AND STORAGE

Precautions for safe handling

None required when handling small quantities. OTHERWISE: Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Safe handling Use in a well-ventilated area. Prevent concentration in hollows and sumps. DO NOT enter confined spaces until atmosphere has been checked. Avoid smoking, naked lights or ignition sources. Avoid contact with incompatible materials. Keep dry to avoid corrosion of cans. Corrosion may result in container perforation and internal pressure may eject contents of can Store in original containers in approved flammable liquid storage area. DO NOT store in pits, depressions, basements or areas where vapours may be trapped. Other information No smoking, naked lights, heat or ignition sources. Keep containers securely sealed. Contents under pressure. Store away from incompatible materials. Store in a cool, dry, well ventilated area.

Conditions for safe storage, including any incompatibilities

Aerosol dispenser. Suitable container Check that containers are clearly labelled. Storage incompatibility Avoid storage with oxidisers

SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION

Control parameters

OCCUPATIONAL EXPOSURE LIMITS (OEL) INGREDIENT DATA Source Ingredient Material name TWA STEL Peak Notes Australia Exposure Standards ethanol Ethyl alcohol 1880 mg/m3 / 1000 ppm Not Available Not Available Not Available

EMERGENCY LIMITS Ingredient Material name TEEL-1 TEEL-2 TEEL-3 ethanol Ethyl alcohol; (Ethanol) Not Available Not Available Not Available

Ingredient Original IDLH Revised IDLH ethanol 15,000 ppm 3,300 [LEL] ppm

Exposure controls

Appropriate engineering None required when handling small quantities.

Continued... Chemwatch: 33-4543 Page 4 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN MAKE ME SHINE SPRAY GLOSS Print Date: 07/06/2016

OTHERWISE: Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed engineering controls can be highly effective in protecting workers and will typically be independent of worker interactions to provide this high level of protection. The basic types of engineering controls are: controls Process controls which involve changing the way a job activity or process is done to reduce the risk. Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation that strategically "adds" and "removes" air in the work environment. Ventilation can remove or dilute an air contaminant if designed properly. The design of a ventilation system must match the particular process and chemical or contaminant in use. Employers may need to use multiple types of controls to prevent employee overexposure.

Personal protection

No special equipment for minor exposure i.e. when handling small quantities. OTHERWISE: Safety glasses with side shields. Eye and face protection Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lenses or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first-aid personnel should be trained in their removal and suitable equipment should be readily available. In the event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Skin protection See Hand protection below No special equipment needed when handling small quantities. OTHERWISE: For potentially moderate exposures: Hands/feet protection Wear general protective gloves, eg. light weight rubber gloves. For potentially heavy exposures: Wear chemical protective gloves, eg. PVC. and safety footwear. Body protection See Other protection below No special equipment needed when handling small quantities. OTHERWISE: Overalls. Other protection Skin cleansing cream. Eyewash unit. Do not spray on hot surfaces. Thermal hazards Not Available

Recommended material(s) Respiratory protection GLOVE SELECTION INDEX Type AX Filter of sufficient capacity. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Glove selection is based on a modified presentation of the: Z88 or national equivalent) "Forsberg Clothing Performance Index". Selection of the Class and Type of respirator will depend upon the level of breathing zone The effect(s) of the following substance(s) are taken into account in the computer- contaminant and the chemical nature of the contaminant. Protection Factors (defined as the generated selection: ratio of contaminant outside and inside the mask) may also be important. ELEVEN MAKE ME SHINE SPRAY GLOSS Required Maximum gas/vapour Half-face Full-Face Material CPI minimum concentration present in air Respirator Respirator BUTYL C protection factor p.p.m. (by volume) NATURAL RUBBER C up to 10 1000 AX-AUS / - Class1 NATURAL+NEOPRENE C up to 50 1000 - AX-AUS / NEOPRENE C Class 1 NITRILE C up to 50 5000 Airline * - NITRILE+PVC C up to 100 5000 - AX-2 PE/EVAL/PE C up to 100 10000 - AX-3 PVC C 100+ Airline**

* CPI - Chemwatch Performance Index * - Continuous Flow ** - Continuous-flow or positive pressure demand A: Best Selection A(All classes) = Organic vapours, B AUS or B1 = Acid gasses, B2 = Acid gas or hydrogen B: Satisfactory; may degrade after 4 hours continuous immersion cyanide(HCN), B3 = Acid gas or hydrogen cyanide(HCN), E = Sulfur dioxide(SO2), G = C: Poor to Dangerous Choice for other than short term immersion Agricultural chemicals, K = Ammonia(NH3), Hg = Mercury, NO = Oxides of nitrogen, MB = NOTE: As a series of factors will influence the actual performance of the glove, a final Methyl bromide, AX = Low boiling point organic compounds(below 65 degC) selection must be based on detailed observation. - * Where the glove is to be used on a short term, casual or infrequent basis, factors such as "feel" or convenience (e.g. disposability), may dictate a choice of gloves which might otherwise be unsuitable following long-term or frequent use. A qualified practitioner should be consulted.

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties

Appearance 22aer Cloudy liquid spray with a perfumed odour; partly mixes with water.

Physical state Liquid Relative density (Water = 1) Not Available Partition coefficient Odour Not Available Not Available n-octanol / water Auto-ignition temperature Odour threshold Not Available Not Available (°C)

Continued... Chemwatch: 33-4543 Page 5 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN MAKE ME SHINE SPRAY GLOSS Print Date: 07/06/2016

Decomposition pH (as supplied) Not Available Not Available temperature Melting point / freezing Not Available Viscosity (cSt) Not Available point (°C) Initial boiling point and Not Available Molecular weight (g/mol) Not Applicable boiling range (°C) Flash point (°C) Not Available Taste Not Available Evaporation rate Not Available Explosive properties Not Available Flammability Not Available Oxidising properties Not Available Surface Tension (dyn/cm or Upper Explosive Limit (%) Not Available Not Available mN/m) Lower Explosive Limit (%) Not Available Volatile Component (%vol) Not Available Vapour pressure (kPa) Not Available Gas group Not Available Solubility in water (g/L) Partly Miscible pH as a solution (1%) Not Available Vapour density (Air = 1) Not Available VOC g/L Not Available

SECTION 10 STABILITY AND REACTIVITY

Reactivity See section 7 Elevated temperatures. Presence of open flame. Chemical stability Product is considered stable. Hazardous polymerisation will not occur. Possibility of hazardous See section 7 reactions Conditions to avoid See section 7 Incompatible materials See section 7 Hazardous decomposition See section 5 products

SECTION 11 TOXICOLOGICAL INFORMATION

Information on toxicological effects

Inhalation hazard is increased at higher temperatures. Inhalation of high concentrations of gas/vapour causes lung irritation with coughing and nausea, central nervous depression with headache and dizziness, Inhaled slowing of reflexes, fatigue and inco-ordination. WARNING:Intentional misuse by concentrating/inhaling contents may be lethal. Not normally a hazard due to physical form of product. Ingestion Considered an unlikely route of entry in commercial/industrial environments Ingestion may result in nausea, abdominal irritation, pain and vomiting Not considered an irritant through normal use. Skin Contact The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin. Spray mist may produce discomfort Eye The material may produce severe irritation to the eye causing pronounced inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis. Principal routes of exposure are by accidental skin and eye contact and by inhalation of vapours especially at higher temperatures. As with any chemical product, contact with unprotected bare skin; inhalation of vapour, mist or dust in work place atmosphere; or ingestion in any form, should be Chronic avoided by observing good occupational work practice. WARNING: Aerosol containers may present pressure related hazards.

ELEVEN MAKE ME SHINE TOXICITY IRRITATION SPRAY GLOSS Not Available Not Available

TOXICITY IRRITATION

Dermal (rabbit) LD50: 17100 mg/kg[1] Eye (rabbit): 500 mg SEVERE

ethanol Inhalation (rat) LC50: 64000 ppm/4h[2] Eye (rabbit):100mg/24hr-moderate

Oral (rat) LD50: >1187-2769 mg/kg[1] Skin (rabbit):20 mg/24hr-moderate Skin (rabbit):400 mg (open)-mild

Legend: 1. Value obtained from Europe ECHA Registered Substances - Acute toxicity 2.* Value obtained from manufacturer's SDS. Unless otherwise specified data extracted from RTECS - Register of Toxic Effect of chemical Substances

The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, ETHANOL scaling and thickening of the skin.

Acute Toxicity Carcinogenicity Skin Irritation/Corrosion Reproductivity

Continued... Chemwatch: 33-4543 Page 6 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN MAKE ME SHINE SPRAY GLOSS Print Date: 07/06/2016

Serious Eye STOT - Single Exposure Damage/Irritation Respiratory or Skin STOT - Repeated Exposure sensitisation Mutagenicity Aspiration Hazard Legend: – Data available but does not fill the criteria for classification – Data required to make classification available – Data Not Available to make classification

SECTION 12 ECOLOGICAL INFORMATION

Toxicity

Ingredient Endpoint Test Duration (hr) Species Value Source ethanol EC50 24 Algae or other aquatic plants 0.0129024mg/L 4 ethanol EC50 48 Crustacea 2mg/L 4 ethanol LC50 96 Fish 42mg/L 4 ethanol NOEC 2016 Fish 0.000375mg/L 4 ethanol EC50 72 Algae or other aquatic plants 275mg/L 2 Extracted from 1. IUCLID Toxicity Data 2. Europe ECHA Registered Substances - Ecotoxicological Information - Aquatic Toxicity 3. EPIWIN Suite V3.12 - Legend: Aquatic Toxicity Data (Estimated) 4. US EPA, Ecotox database - Aquatic Toxicity Data 5. ECETOC Aquatic Hazard Assessment Data 6. NITE (Japan) - Bioconcentration Data 7. METI (Japan) - Bioconcentration Data 8. Vendor Data

Persistence and degradability

Ingredient Persistence: Water/Soil Persistence: Air ethanol LOW (Half-life = 2.17 days) LOW (Half-life = 5.08 days)

Bioaccumulative potential

Ingredient Bioaccumulation ethanol LOW (LogKOW = -0.31)

Mobility in soil

Ingredient Mobility ethanol HIGH (KOC = 1)

SECTION 13 DISPOSAL CONSIDERATIONS

Waste treatment methods

Consult State Land Waste Management Authority for disposal. Discharge contents of damaged aerosol cans at an approved site. Product / Packaging Allow small quantities to evaporate. disposal DO NOT incinerate or puncture aerosol cans. Bury residues and emptied aerosol cans at an approved site.

SECTION 14 TRANSPORT INFORMATION

Labels Required

Marine Pollutant NO HAZCHEM Not Applicable

Land transport (ADG)

UN number 1950 Packing group Not Applicable UN proper shipping name AEROSOLS Environmental hazard Not Applicable

Class 2.1 Transport hazard class(es) Subrisk Not Applicable

Special provisions 63 190 277 327 344 Special precautions for user Limited quantity 1000ml

Continued... Chemwatch: 33-4543 Page 7 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN MAKE ME SHINE SPRAY GLOSS Print Date: 07/06/2016

Air transport (ICAO-IATA / DGR)

UN number 1950 Packing group Not Applicable UN proper shipping name Aerosols Environmental hazard Not Applicable

ICAO/IATA Class 2.1 Transport hazard class(es) ICAO / IATA Subrisk Not Applicable ERG Code 10L

Special provisions A145A167A802; A1A145A167A802 Cargo Only Packing Instructions 203 Cargo Only Maximum Qty / Pack 150 kg Special precautions for user Passenger and Cargo Packing Instructions 203; Forbidden Passenger and Cargo Maximum Qty / Pack 75 kg; Forbidden Passenger and Cargo Limited Quantity Packing Instructions Y203; Forbidden Passenger and Cargo Limited Maximum Qty / Pack 30 kg G; Forbidden

Sea transport (IMDG-Code / GGVSee)

UN number 1950 Packing group Not Applicable UN proper shipping name AEROSOLS Environmental hazard Not Applicable

IMDG Class 2.1 Transport hazard class(es) IMDG Subrisk Not Applicable

EMS Number F-D, S-U Special precautions for user Special provisions 63 190 277 327 344 959 Limited Quantities 1000ml

Transport in bulk according to Annex II of MARPOL and the IBC code Not Applicable

SECTION 15 REGULATORY INFORMATION

Safety, health and environmental regulations / legislation specific for the substance or mixture

ETHANOL(64-17-5) IS FOUND ON THE FOLLOWING REGULATORY LISTS Australia Exposure Standards Australia Inventory of Chemical Substances (AICS) Australia Hazardous Substances Information System - Consolidated Lists

National Inventory Status Australia - AICS Y Canada - DSL Y Canada - NDSL N (ethanol) China - IECSC Y Europe - EINEC / ELINCS / Y NLP Japan - ENCS Y Korea - KECI Y New Zealand - NZIoC Y Philippines - PICCS Y USA - TSCA Y Y = All ingredients are on the inventory Legend: N = Not determined or one or more ingredients are not on the inventory and are not exempt from listing(see specific ingredients in brackets)

SECTION 16 OTHER INFORMATION

Other information Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch Classification committee using available literature references. A list of reference resources used to assist the committee may be found at: www.chemwatch.net

The SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks in the workplace or other

Continued... Chemwatch: 33-4543 Page 8 of 8 Issue Date: 01/01/2013 Version No: 2.1.1.1 ELEVEN MAKE ME SHINE SPRAY GLOSS Print Date: 07/06/2016

settings. Risks may be determined by reference to Exposures Scenarios. Scale of use, frequency of use and current or available engineering controls must be considered.

Definitions and abbreviations PC－TWA: Permissible Concentration-Time Weighted Average PC－STEL: Permissible Concentration-Short Term Exposure Limit IARC: International Agency for Research on Cancer ACGIH: American Conference of Governmental Industrial Hygienists STEL: Short Term Exposure Limit TEEL: Temporary Emergency Exposure Limit。 IDLH: Immediately Dangerous to Life or Health Concentrations OSF: Odour Safety Factor NOAEL :No Observed Adverse Effect Level LOAEL: Lowest Observed Adverse Effect Level TLV: Threshold Limit Value LOD: Limit Of Detection OTV: Odour Threshold Value BCF: BioConcentration Factors BEI: Biological Exposure Index

This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written permission from CHEMWATCH. TEL (+61 3) 9572 4700.

end of SDS Page 1 of 6 Quality manufacturers of bath & body care products – made in Australia SAFETY DATA SHEET According to Regulation (EC) no. 1907/2006

SECTION 1: Identification of the substance/mixture & of the Company/ Undertaking of the substance/mixture and of the company/undertaking 1.1 Product Name: Eleven Matte Texture Styling Paste

1.2 Application of the substance/mixture: Hair styling product. For external use only.

1.3 Details of the Manufacturer / Distributor: Natural Beauty Care Pty Ltd Eleven Australia Pty Ltd 8 Teton Court, 7 Endeavour Way, Highett, Victoria Sunshine West, Victoria 3190, Australia. 3020, Australia.

1.4 Emergency telephone number: +61 3 9553 0733 Facsimile Number: +61 3 9553 4988

1.5 POISON INFORMATION CENTRE: 13 11 26 (Australia)

SECTION 2: Hazard Identification

Not classified as Dangerous goods by the criteria of the Australian Dangerous goods code (ADG) for Transport and Rail. NON-DANGEROUS GOODS.

This material is a personal care product that is safe for consumers with intended and foreseeable use. This product is non- hazardous according to Work Safe Australia.

Classification of the substance or mixture (Classification according to Regulation (EC) No 1272/2008): Nil Classification according to the Directive 67/548/EEC or Directive 1999/45/EC: Not regulated

Signal word: Not relevant

Hazard statements: Not relevant

Precautionary statements: P101 If medical advice is needed, have product container or label at hand P102 Keep out of reach of children P103 Read label before use

Page 2 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 3: Composition/formulation on ingredients

Name of Chemical CAS Number Percentage w/w

Water (Aqua) 7732-18-5 < 50-60 Cetearyl Alcohol 67762-27-0 < 10 Lanolin Cera 68201-49-0 < 10 Beeswax (Cera Alba) 8012-89-3 < 10 Stearyl Stearate 2778-96-3 < 10 Glycerin 56-81-5 < 5 Propylene Glycol 57-55-6 < 5 PEG-8 Beeswax - < 5

Oleth-30 9004-98-2 < 5 Oleth-5 9004-98-2 < 5 Microcrystalline Wax (Cera Microcrystallina) 63231-60-7 < 5 PVP 9003-39-8 < 5 Octyldodecanol 5333-42-6 < 1 Ricinus Communis (Castor) Seed Oil 8001-79-4 < 1 Dimethicone 9006-65-9 < 1 Phenoxyethanol 122-99-6 < 1 Benzyl Alcohol 100-51-6 < 1 - Acrylates/C10-30 Alkyl Acrylate Crosspolymer < 0.5 Fragrance (Parfum) - < 0.5 Triethanolamine 102-71-6 < 0.5

Yellow 5 (CI 19140) 12225-21-7 < 0.5 Caramel 8028-89-5 < 0.5

SECTION 4: First Aid Measures

4.1 Description of first aid measures General information: No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. HEALTH EFFECTS: Acute - Swallowed May be harmful if large amounts are swallowed Acute - Eye Full strength material may be irritating to eyes Acute - Skin Not considered an irritant through normal use. Full strength material in repeated or prolonged contact with skin may be irritating and cause allergic reactions in sensitive individuals Acute - Inhaled Full strength material should not cause any irritation to the mucous membrane and upper airways

Page 3 of 6 Quality manufacturers of bath & body care products – made in Australia

FIRST AID: Swallowed Do not induce vomiting, Give plenty of water and seek medical advice Eye Flush eye with copious amounts of water for 15 minutes including under eyelid. If discomfit persists, obtain medical advice. Skin Remove contaminated clothing. Wash affected areas with warm soapy water

Inhaled Remove to fresh uncontaminated air, lay patient on back until breathing returns to normal

4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available.

SECTION 5: Firefighting Measures

5.1 Suitable Extinguishing media: Carbon dioxide, Foam, Dry Chemical

5.2 Special hazards arising from the substance or mixture: No further relevant information available.

5.3 Advice for firefighters: Wear Protective equipment. Do not inhale explosion gases or combustion gases. Hazchem Code: Not applicable.

SECTION 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures: Remove all sources of ignition. Increase ventilation. Evacuate all personnel. Wear sufficient respiratory protection and full protective clothing to minimise skin and eye exposure. If possible contain the spill.

6.2 Environmental precautions: No special measures required.

6.3 Methods and material for containment and cleaning up: Slippery when spilt. Clean up immediately. Wear protective equipment to avoid eye contact. Contain – prevent run off into drains and waterways. Use absorbent material. Collect and seal on properly labelled containers for disposal. If large quantities of this material enter the waterways, contact the Environmental Protection Authority or you local Waste Management Authority.

6.4 Reference to other sections: See Section 7 for information on safe handling.

SECTION 7: Handling & Storage

7.1 Precautions for safe handling None required when handling small quantities. Avoid contact with eyes. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing. Page 4 of 6 Quality manufacturers of bath & body care products – made in Australia

Information about fire - and explosion protection: No special measures required.

7.2 Conditions for safe storage, including any incompatibilities: Store below 30C if in original containers. Store in a cool dry well ventilated area. Store away from Incompatible materials.

7.3 Specific end use(s) No further relevant information available.

SECTION 8: Exposure Controls /Personal Protection:

Additional information about design of technical facilities: No further data; see item 7.

8.1 Control parameters: No value assigned for this specific material

8.2 Appropriate engineering controls: Non-required

8.3 Personal Protection: None required when handling small quantities. Avoid contact with eyes. Do not ingest. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing. Some sensitive individuals may develop an allergic response.

National Exposure Standards: No exposure standards have been established for this material by Work Safe Australia. Biological Limit Values: No biological limit allowed.

SECTION 9: Physical & Chemical Properties Appearance: Thick Waxy Balm Colour: White/ Off White Odour: Vanilla Odour threshold: Not determined. pH: 6.0-6.5 Flash point: Not available Melting point/Melting range: Not determined Boiling point/Boiling range: Not determined. Danger of explosion: Product does not present an explosion hazard. Self-igniting: Product is not self - igniting. Solubility in / Miscibility with water: Soluble. Density at 20 °C: 0.90-1.04 g/cm³ Vapour density Not applicable. Vapour pressure: Not applicable.

SECTION 10: Stability & Reactivity

10.1 Reactivity: No further relevant information available. 10.2 Chemical stability: Stable under normal handling and storage conditions. Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid No further relevant information available. 10.5 Incompatible materials: No further relevant information available. 10.6 Hazardous decomposition products: None under normal conditions of storage and use.

Page 5 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 11: Toxicology Information

11.1 Information on toxicological effects: No adverse health effects expected if the product is handled in accordance with this safety data sheet and the product label. Product is safe for its intended use based on the formulation, testing results and the history of safe consumer use.

Acute toxicity: No LD50 data available for this product

Primary irritant effect: On the skin: No irritant effect On the eye: No irritating effect Carcinogen Classification: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed carcinogen by IARC

SECTION 12: Ecological Information

12.1 Ecotoxicity: Avoid contaminating waterways

12.2 Persistence/degradability: No tested data available on this product.

12.3 Bioaccumulative potential: This product shows a low bioaccumulation potential

12.4 Mobility: Prevent contamination of soil, ground and surface water.

Section 13: Disposals Consideration

Disposal Methods: Refer to Waste Management Authority. Dispose of contents/containers in accordance with local/regional/national/international regulations.

SECTION 14: Transport Information

ADG 7.3 Land Transport of Dangerous Goods Labels required: No special requirements UN Number: N/A Proper Shipping Name: N/A DG Class: N/A Subsidiary Risk: None Packing Group: N/A HAZCHEM Code: N/A Special Provision: N/A

Page 6 of 6 Quality manufacturers of bath & body care products – made in Australia

MARITIME TRANSPORTATION AIR TRANSPORTATION IMCD IATA Dangerous Goods Regulations (DGR) 56th Edition 2015 IMCD: N/A ICAO/IATA Class: N/A Label: N/A Label: N/A UN Number: N/A UN Number: N/A Packaging Group: Not allocated Packaging Group: N/A EMS Number: N/A Marine Pollutant: Not allocated Proper Shipping Name: As above Proper Shipping Name: As above Special Provisions; N/A Special Provisions; N/A

SECTION 15: Regulatory Information

POISONS SCHEDULE (SUSMP): Not subject to labelling

All ingredients in this product are compliant with NICNAS AICS: regulations

SECTION 16: OTHER INFORMATION

The information herein is accurate to the best of our knowledge. However, it is meant to describe safety requirements of our products, thus this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. No warranty is expressed or made as to this document’s accuracy, reliability or completeness. User has the sole responsibility to determine the suitability of the materials for any use and the manner of use contemplated.

Relevant phrases Non relevant

Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) AICS: Australian Inventory of Chemical substances NICNAS: National Industrial Chemical Notification & Assessment Scheme IARC: International Agency for Research Cancer

MSDS prepared by: Natural Beauty Care Pty. Ltd. Issue Date: 14/06/2016 Revision Number: 1 END OF MSDS Safety Data Sheet

SECTION 1: Identification Product name：Roll On Perfume-Daisy Formula Code: ADLYB071710 Suitable Uses：Personal care product. Structure : Not available. Manufacturer information: Guangzhou Beaver Cosmetics Co., Ltd Add:No.5 Zhenxing Rd.,High-tech Industrial Park,Taiping Development Zone Conghua Guangzhou China 510990 Tel: 86-20-37940773 Fax: 86-20-37940775 Email: [email protected] DATE: August 1th, 2017

SECTION 2: Hazard(s) Identification

2.1 Classification of substance or mixtures Classification : Not classified

2.2 Label elements Hazard pictograms: Not applicable Signal word : No signal word Hazard statements : No known significant effects or critical hazards. Precautionary statements Prevention : Not applicable. Response : Not applicable. Storage : Not applicable. Disposal : Not applicable.

2.3 Other hazards Rayon Fibers are not classified as dangerous for supply or transport.

SECTION 3: Composition/Information on Ingredients

Component : INCI name: CAS No. Function. CYCLOPENTASILOXANE 541-02-6 emollient C12-15 ALKYL BENZOATE 68411-27-8 emollient ARGANIA SPINOSA KERNEL OIL 223747-87-3 emollient SCLEROCARYA BIRREA SEED OIL emollient OLEA EUROPAEA (OLIVE) FRUIT OIL 8001-21-6 emollient MACADAMIA TERNIFOLIA SEED OIL 8001-25-0 emollient COCOS NUCIFERA (COCONUT) OIL 8001-31-8 emollient PARFUM fragrance HEXYL CINNAMAL 101-86-0 fragrance LINALOOL 78-70-6 fragrance ALPHA-ISOMETHYL IONONE 127-51-5 fragrance BUTYLPHENYL METHYLPROPIONAL 80-54-6 fragrance CITRONELLOL 106-22-9;26489-01-0 fragrance

Within the present knowledge of the supplier, this product does not contain any hazardous.ingredients in quantities requiring reporting in this section, in accordance with EU or national regulations.

SECTION 4: First-Aid Measures

4.1 Description of first aid measures Inhalation : Move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Get medical attention if symptoms occur. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.

Ingestion : Wash out mouth with water. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if symptoms occur. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Skin contact : No adverse reactions (Except for the eyes and mucous membrane)

Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.

4.2 Most important symptoms and effects, both acute and delayed See Section 11 for more detailed information on health effects and symptoms.

4.3 Indication of any immediate medical attention and special treatment needed See Section 11 for more detailed information on health effects and symptoms

SECTION 5: Fire-Fighting Measures

5.1 Extinguishing media Suitable extinguishing media : In case of fire, use water spray (fog), foam, dry chemical or CO2. Unsuitable extinguishing media : Do not use water jet.

5.2 Special hazards arising from the substance or mixture Hazards from the substance or mixture : Fine dust clouds may form explosive mixtures with air. Hazardous combustion products : Decomposition products may include the following materials: carbon oxide /nitrogen oxides

5.3 Advice for firefighters Special precautions for firefighters: Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire exposed containers cool. Special protective equipment for firefighters: Fire-fighters should wear appropriate protective equipment and self contained breathing apparatus (SCBA) with a full face piece operated in positive pressure mode.

SECTION 6: Accidental Release Measures

6.1 Personal precautions,protective equipment and emergency procedures No action shall be taken involving any personal risk or without suitable training. Keep unnecessary and unprotected personnel from entering. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing dust. Provide adequate ventilation.Put on appropriate personal protective equipment (see Section 8). Hazard of slipping on spilt product

6.2 Environmental precautions Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

6.3 Methods and materials for containment and cleaning up Small spill : Move containers from spill area. Vacuum or sweep up material and place in a designated, labelled waste container. Use spark-proof tools and explosion proof equipment. Dispose of via a licensed waste disposal contractor. Large spill : Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up material and place in a designated, labelled waste container. Avoid creating dusty conditions and prevent wind dispersal. Use spark proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor. Note: see section 1 for emergency contact information and section 13 for waste disposal.

6.4 Reference to other sections See Section 8 for information on appropriate personal protective equipment. See Section 13 for additional waste treatment information.

SECTION 7: Handling and Storage

7.1 Precautions for safe handling : Put on appropriate personal protective equipment (see Section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing dust. Avoid the creation of dust when handling and avoid all possible sources of ignition (spark or flame). Prevent dust accumulation. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Electrical equipment and lighting should be protected to appropriate standards to prevent dust coming into contact with hot surfaces,sparks or other ignition sources. Empty containers retain product.

7.2 Conditions for safe storage, including any incompatibilities Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination.

7.3 Specific end use(s) Recommendations : Not available Industrial sector specific solutions: Not available

SECTION 8: Exposure Controls/Personal Protection

8.1 Control parameters Exposure limit values : Not available. Recommended monitoring procedures : If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to chemical agents and national guidance documents for methods for the determination of hazardous substances.

8.2 Exposure controls Risk management measures Occupational exposure controls Technical measures : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. Use explosion-proof ventilation equipment. Personal protection measures: Respiratory protection: Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Recommended: In case of dust formation particle filter. Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. After contamination with product change the gloves immediately and dispose of them according to relevant national and local regulations. Eye protection : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If operating conditions cause high dust concentrations to be produced, use dust goggles. Recommended: Tightly fitting safety goggles. Hygiene measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Environmental exposure controls Technical measures : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

SECTION 9: Physical and Chemical Properties

Form : Transparent liquid Odour : Fragrance pH(10% suspension) : Not applicable Decomposition temp. : Not applicable Flammability : Not applicable. Explosive Limits : Not applicable Solubility : Insoluble

SECTION 10: Stability and Reactivity

10.1 Reactivity : No specific test data related to reactivity available for this product or its Ingredients.

10.2 Chemical stability :The product is stable

10.3 Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.

10.4 Conditions to avoid :Avoid the creation of dust when handling and avoid all possible sources of ignition (spark or flame). Prevent dust accumulation. In the case of dusty organic products the possibility of a dust explosion should always be considered. No hazardous reactions when used as directed.

10.5 Incompatible materials: Reactive or incompatible with the following materials: oxidizing Materials

10.6 Hazardous decomposition products: Under normal conditions of storage and use, hazardous decomposition products should not be product.

SECTION 11: Toxicological Information

Eye contact : Exposure to airborne concentrations above statutory or recommended exposure limits may cause irritation of the eyes. Acute toxicity estimates Not available Irritation/Corrosion Skin : Non-irritating Eyes : Non-irritating

SECTION 12: Ecological Information (non-mandatory)

They are extremely stable ,except under alkaline conditions. In Germany, Roll On Perfume are not classified by KBwS(Commission for Evaluation of Substances Hazardous to Waters) as non-hazardous to waters.

SECTION 13: Disposal Considerations (non-mandatory)

Method of Disposal : Dispose of in accordance with local and national regulations governing chemical waste. Other Information : Roll On Perfume should not be washed into waste-water drains. Roll On Perfume should not be disposed of where there is a risk of contact with water

SECTION 14: Transport Information (non-mandatory) Roll On Perfume are not classified as dangerous substances for supply or transport under international regulations.

SECTION 15: Regulatory Information (non-mandatory)

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture EU Regulation (EC) No. 1907/2006 (REACH) Annex XVII – Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles: Not applicable.

15.2 Chemical Safety Assessment: Roll On Perfume are not classified as dangerous goods. Packages carry the following safety advice S29 : Do not empty into drains

SECTION 16: Other Information

N/A

Notice to reader The data given here is based on current knowledge and experience. The purpose of this Safety Data Sheet and its Annex [if required according to Regulation (EC) 1907/2006 (REACh)] is to describe the products in terms of their safety requirements. The given details do not imply any guarantee concerning the composition, properties or performance.

Page 1/6 SAFETY DATA SHEET According to Safe Work Australia Printing date 14.07.2016 Revision: 14.07.2016

1 . IDENTIFICATION: PRODUCT IDENTIFIER AND CHEMICAL IDENTITY

Product Name: SLICK HOLD POMADE Other Means of Identification: Mixture Recommended Use of the Chemical and Restriction on Use: Hair styling product Details of Manufacturer or Importer: Health Focus Manufacturers 6 Huntington Street Clontarf QLD 4019 Phone Number: +61 7 3883 1355 Emergency telephone number: +61 438 756 977 2 . HAZARDS IDENTIFICATION

Hazardous Nature: Not classified as Hazardous according to the Globally Harmonised System of Classification and Labelling of Chemicals (GHS) and Safe Work Australia criteria. Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. (7th edition)

environment

Aquatic Acute 1 H400 Very toxic to aquatic life. Aquatic Chronic 1 H410 Very toxic to aquatic life with long lasting effects. Signal Word Warning Hazard Statements H410 Very toxic to aquatic life with long lasting effects. Precautionary Statements P273 Avoid release to the environment. P391 Collect spillage. P501 Dispose of contents/container in accordance with local/regional/national regulations. 3 . COMPOSITION AND INFORMATION ON INGREDIENTS

Chemical Characterization: Mixtures Description: Mixture of substances listed below with nonhazardous additions. Hazardous Components: 56-81-5 1,2,3-Propanetriol 5% 57-55-6 1,2-Propanediol 5% 4 . FIRST AID MEASURES

Inhalation: If inhaled, remove to fresh air. Seek medical attention if breathing problems develop. Skin Contact: In case of skin irritation wash affected areas with water and soap and discontinue use. Seek medical attention if symptoms persist. (Contd. on page 2)

42.0 Page 2/6 SAFETY DATA SHEET According to Safe Work Australia Printing date 14.07.2016 Revision: 14.07.2016

Product Name: SLICK HOLD POMADE

(Contd. of page 1) Eye Contact: In case of eye irritation, hold eyelids open and rinse with water. Seek medical attention if symptoms persist. Ingestion: If swallowed, do not induce vomiting. Rinse mouth with water. Never give anything by mouth to an unconscious person. Seek medical attention if large amounts are ingested. Symptoms Caused by Exposure: Eye Contact: May cause slight eye irritation. Ingestion: May cause gastrointestinal irritation. 5 . FIRE FIGHTING MEASURES

Suitable Extinguishing Media: Water spray or fog, foam, dry chemical powder or carbon dioxide. Specific Hazards Arising from the Chemical: Hazardous combustion products include oxides of carbon and nitrogen. Product is not flammable. Special Protective Equipment and Precautions for Fire Fighters: When fighting a major fire wear self-contained breathing apparatus and protective equipment. 6 . ACCIDENTAL RELEASE MEASURES

Personal Precautions, Protective Equipment and Emergency Procedures: Wear appropriate protective clothing. Ensure adequate ventilation. Environmental Precautions: In the event of a major spill, prevent spillage from entering drains or water courses. Methods and Materials for Containment and Cleaning Up: Scoop up spill and place in suitable container for subsequent disposal. Provide adequate ventilation. Spilt product may be slippery. Clean the spill area with water. 7 . HANDLING AND STORAGE

Precautions for Safe Handling: Use of safe work practices are recommended to avoid eye contact and inhalation of product. Food, beverages and tobacco products should not be stored or consumed where this material is in use. Conditions for Safe Storage: Store in a cool, dry and well ventilated area. Keep in original container tightly closed when not in use. 8 . EXPOSURE CONTROLS AND PERSONAL PROTECTION Exposure Standards: 56-81-5 1,2,3-Propanetriol NES TWA: 10 mg/m³ 57-55-6 1,2-Propanediol NES TWA: 474* 10** mg/m³, 150* ppm *vapour&particluates;**particulates only Engineering Controls: Maintain air concentration below occupational exposure standards, providing adequate ventilation. (Contd. on page 3)

42.0 Page 3/6 SAFETY DATA SHEET According to Safe Work Australia Printing date 14.07.2016 Revision: 14.07.2016

Product Name: SLICK HOLD POMADE

(Contd. of page 2) Respiratory Protection: Respiratory protection is not required under normal use conditions. Skin Protection: Skin protection is not required under normal use conditions. Eye and Face Protection: Eye protection is not required under normal use conditions. 9 . PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Form: Waxy solid Colour: Yellow Odour: Fragrant odour Odour Threshold: No information available pH-Value: No information available Melting point/Melting range: No information available Initial Boiling Point/Boiling Range: <100 °C Flash Point: Not applicable Flammability: Product is not flammable. Auto-ignition Temperature: No information available Decomposition Temperature: No information available Explosion Limits: Lower: Not applicable Upper: Not applicable Vapour Pressure: No information available Relative Density at 20 °C: 1.0 Vapour Density: No information available Evaporation Rate: No information available Solubility in Water: Soluble Partition Coefficient (n-octanol/water): No information available 10 . STABILITY AND REACTIVITY

Possibility of Hazardous Reactions: Hazardous polymerisation will not occur. Chemical Stability: Stable at ambient temperature and under normal conditions of use. Conditions to Avoid: No further relevant information available. Incompatible Materials: No further relevant information available. Hazardous Decomposition Products: Oxides of carbon and nitrogen. 11 . TOXICOLOGICAL INFORMATION

Toxicity: LD₅₀/LC₅₀ Values Relevant for Classification: 56-81-5 1,2,3-Propanetriol Oral LD₅₀ 12600 mg/kg (rat) 57-55-6 1,2-Propanediol Oral LD₅₀ 2000 mg/kg (rat) Dermal LD₅₀ 20800 mg/kg (rabbit) (Contd. on page 4)

42.0 Page 4/6 SAFETY DATA SHEET According to Safe Work Australia Printing date 14.07.2016 Revision: 14.07.2016

Product Name: SLICK HOLD POMADE

(Contd. of page 3) 122-99-6 2-Phenoxyethanol Oral LD₅₀ 1260 mg/kg (rat) Dermal LD₅₀ 5000 mg/kg (rabbit) 55406-53-6 3-Iodo-2-propynylbutylcarbamate Oral LD₅₀ 1470 mg/kg (rat) Dermal LD₅₀ >2000 mg/kg (rat) Inhalation LC₅₀/4 h >6.89 mg/l (rat) 2783-94-0 disodium 6-hydroxy-5-[(4-sulphonatophenyl)azo]naphthalene-2-sulphonate Oral LD₅₀ >10000 mg/kg (rat) Acute Health Effects Inhalation: No adverse health effects expected. Skin: No adverse health effects expected. Eye: May cause slight eye irritation. Ingestion: May cause gastrointestinal irritation. Skin Corrosion / Irritation: Based on classification principles, the classification criteria are not met. Serious Eye Damage / Irritation: Based on classification principles, the classification criteria are not met. Respiratory or Skin Sensitisation: Based on classification principles, the classification criteria are not met. Germ Cell Mutagenicity: Based on classification principles, the classification criteria are not met. Carcinogenicity: Polyvinyl pyrrolidone and Sunset Yellow FCF are classified by IARC as Group 3 - Not classifiable as to its carcinogenicity to humans. Reproductive Toxicity: Based on classification principles, the classification criteria are not met. Specific Target Organ Toxicity (STOT) - Single Exposure: Based on classification principles, the classification criteria are not met. Specific Target Organ Toxicity (STOT) - Repeated Exposure: Based on classification principles, the classification criteria are not met. Aspiration Hazard: Based on classification principles, the classification criteria are not met. Chronic Health Effects: No information available Existing Conditions Aggravated by Exposure: No information available Additional toxicological information: No information available 12 . ECOLOGICAL INFORMATION

Ecotoxicity: No information available Aquatic toxicity: Very toxic to aquatic life with long lasting effects. Persistence and Degradability: No information available Bioaccumulative Potential: No information available Mobility in Soil: No information available (Contd. on page 5)

42.0 Page 5/6 SAFETY DATA SHEET According to Safe Work Australia Printing date 14.07.2016 Revision: 14.07.2016

Product Name: SLICK HOLD POMADE

(Contd. of page 4) Other adverse effects: No information available 13 . DISPOSAL CONSIDERATIONS

Disposal Methods and Containers: Dispose according to applicable local and state government regulations. Special Precautions for Landfill or Incineration: Please consult your state Land Waste Management Authority for more information. 14 . TRANSPORT INFORMATION

UN Number ADG Not regulated IMDG, IATA UN3077 Proper Shipping Name ADG Not regulated IMDG ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Alcohols, C16-18, ethoxylated, Glycols, 1.2-, C12-16, ethoxylated propoxylated), MARINE POLLUTANT IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Alcohols, C16-18, ethoxylated, Glycols, 1.2-, C12-16, ethoxylated propoxylated) Dangerous Goods Class ADG Class: Not regulated IMDG Class: 9 Miscellaneous dangerous substances and articles. Packing Group: ADG Not regulated IMDG, IATA III Marine pollutant: Yes Symbol (fish and tree) EMS Number: F-A,S-F Hazchem Code: 2Z Limited Quantities: 5 kg 15 . REGULATORY INFORMATION Australian Inventory of Chemical Substances: 56-81-5 1,2,3-Propanetriol 57-55-6 1,2-Propanediol Standard for the Uniform Scheduling of Drugs and Poisons (SUSMP) - Poison Schedule: Poisons Schedule: 5 16 . OTHER INFORMATION

Date of Preparation or Last Revision: 14.07.2016 Prepared by: MSDS.COM.AU Pty Ltd www.msds.com.au Abbreviations and acronyms: ADG: Australian Dangerous Goods IMDG: International Maritime Code for Dangerous Goods (Contd. on page 6)

42.0 Page 6/6 SAFETY DATA SHEET According to Safe Work Australia Printing date 14.07.2016 Revision: 14.07.2016

Product Name: SLICK HOLD POMADE

(Contd. of page 5) IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals CAS: Chemical Abstracts Service (division of the American Chemical Society) LC₅₀: Lethal concentration, 50 percent LD₅₀: Lethal dose, 50 percent IARC: International Agency for Research on Cancer STEL: Short Term Exposure Limit TWA: Time Weighted Average NES: National Exposure Standard (Safe Work Australia - Workplace Exposure Standards For Airborne Contaminants) Aquatic Acute 1: Hazardous to the aquatic environment, short-term (Acute). Category 1 Aquatic Chronic 1: Hazardous to the aquatic environment, long-term (Chronic). Category 1 Disclaimer This SDS is prepared in accord with the Safe Work Australia document “Code of Practice for the Preparation of Safety Data Sheets for Hazardous Chemicals - December 2011” The information contained in this safety data sheet is provided in good faith and is believed to be accurate at the date of issuance. Health Focus Manufacturers makes no representation of the accuracy or comprehensiveness of the information and to the full extent allowed by law excludes all liability for any loss or damage related to the supply or use of the information in this material safety data sheet. MSDS.COM.AU Pty Ltd is not in a position to warrant the accuracy of the data herein. The user is cautioned to make their own determinations as to the suitability of the information provided to the particular circumstances in which the product is used.

42.0 Page 1 of 6 Quality manufacturers of bath & body care products – made in Australia SAFETY DATA SHEET According to Regulation (EC) no. 1907/2006

SECTION 1: Identification of the substance/mixture & of the Company/ Undertaking of the substance/mixture and of the company/undertaking 1.1 Product Name: Eleven Strong Hold Styling Paste

1.2 Application of the substance/mixture: Hair styling product. For external use only.

1.3 Details of the Manufacturer / Distributor: Natural Beauty Care Pty Ltd Eleven Australia Pty Ltd 8 Teton Court, 7 Endeavour Way, Highett, Victoria Sunshine West, Victoria 3190, Australia. 3020, Australia.

1.4 Emergency telephone number: +61 3 9553 0733 Facsimile Number: +61 3 9553 4988

1.5 POISON INFORMATION CENTRE: 13 11 26 (Australia)

SECTION 2: Hazard Identification

Not classified as Dangerous goods by the criteria of the Australian Dangerous goods code (ADG) for Transport and Rail. NON-DANGEROUS GOODS.

This material is a personal care product that is safe for consumers with intended and foreseeable use. This product is non- hazardous according to Work Safe Australia.

Classification of the substance or mixture (Classification according to Regulation (EC) No 1272/2008): Nil Classification according to the Directive 67/548/EEC or Directive 1999/45/EC: Not regulated

Signal word: Not relevant

Hazard statements: Not relevant

Precautionary statements: P101 If medical advice is needed, have product container or label at hand P102 Keep out of reach of children P103 Read label before use

Page 2 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 3: Composition/formulation on ingredients

Name of Chemical CAS Number Percentage w/w

Water (Aqua) 7732-18-5 < 50-60 Lanolin Cera 68201-49-0 < 20 Beeswax (Cera Alba) 8012-89-3 < 20 Cetearyl Alcohol 67762-27-0 < 10 Stearyl Stearate 2778-96-3 < 10 Glycerin 56-81-5 < 5 Propylene Glycol 57-55-6 < 5 PEG-8 Beeswax - < 5 Oleth-30 9004-98-2 < 5 Oleth-5 9004-98-2 < 5 Microcrystalline Wax (Cera Microcrystallina) 63231-60-7 < 5 PVP 9003-39-8 < 5

Octyldodecanol 5333-42-6 < 1 Ricinus Communis (Castor) Seed Oil 8001-79-4 < 1 Dimethicone 9006-65-9 < 1 Phenoxyethanol 122-99-6 < 1 Benzyl Alcohol 100-51-6 < 1 - Acrylates/C10-30 Alkyl Acrylate Crosspolymer < 0.5 Fragrance (Parfum) - < 0.5 Triethanolamine 102-71-6 < 0.5 Yellow 5 (CI 19140) 12225-21-7 < 0.5 Caramel 8028-89-5 < 0.5

SECTION 4: First Aid Measures

4.1 Description of first aid measures General information: No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. HEALTH EFFECTS: Acute - Swallowed May be harmful if large amounts are swallowed Acute - Eye Full strength material may be irritating to eyes Acute - Skin Not considered an irritant through normal use. Full strength material in repeated or prolonged contact with skin may be irritating and cause allergic reactions in sensitive individuals Acute - Inhaled Full strength material should not cause any irritation to the mucous membrane and upper airways

Page 3 of 6 Quality manufacturers of bath & body care products – made in Australia

FIRST AID: Swallowed Do not induce vomiting, Give plenty of water and seek medical advice Eye Flush eye with copious amounts of water for 15 minutes including under eyelid. If discomfit persists, obtain medical advice. Skin Remove contaminated clothing. Wash affected areas with warm soapy water

Inhaled Remove to fresh uncontaminated air, lay patient on back until breathing returns to normal

4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available.

SECTION 5: Firefighting Measures

5.1 Suitable Extinguishing media: Carbon dioxide, Foam, Dry Chemical

5.2 Special hazards arising from the substance or mixture: No further relevant information available.

5.3 Advice for firefighters: Wear Protective equipment. Do not inhale explosion gases or combustion gases. Hazchem Code: Not applicable.

SECTION 6: Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures: Remove all sources of ignition. Increase ventilation. Evacuate all personnel. Wear sufficient respiratory protection and full protective clothing to minimise skin and eye exposure. If possible contain the spill.

6.2 Environmental precautions: No special measures required.

6.3 Methods and material for containment and cleaning up: Slippery when spilt. Clean up immediately. Wear protective equipment to avoid eye contact. Contain – prevent run off into drains and waterways. Use absorbent material. Collect and seal on properly labelled containers for disposal. If large quantities of this material enter the waterways, contact the Environmental Protection Authority or you local Waste Management Authority.

6.4 Reference to other sections: See Section 7 for information on safe handling.

Page 4 of 6 Quality manufacturers of bath & body care products – made in Australia

SECTION 7: Handling & Storage

7.1 Precautions for safe handling None required when handling small quantities. Avoid contact with eyes. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing.

Information about fire - and explosion protection: No special measures required.

7.2 Conditions for safe storage, including any incompatibilities: Store below 30C if in original containers. Store in a cool dry well ventilated area. Store away from Incompatible materials.

7.3 Specific end use(s) No further relevant information available.

SECTION 8: Exposure Controls /Personal Protection:

Additional information about design of technical facilities: No further data; see item 7.

8.1 Control parameters: No value assigned for this specific material

8.2 Appropriate engineering controls: Non-required

8.3 Personal Protection: None required when handling small quantities. Avoid contact with eyes. Do not ingest. Good personal hygiene practices should be used ie. Wash hands after contact otherwise wear protective clothing. Some sensitive individuals may develop an allergic response.

National Exposure Standards: No exposure standards have been established for this material by Work Safe Australia. Biological Limit Values: No biological limit allowed.

SECTION 9: Physical & Chemical Properties Appearance: Thick Waxy Balm Colour: White/ Off White Odour: Vanilla Odour threshold: Not determined. pH: 6.0-6.5 Flash point: Not available Melting point/Melting range: Not determined Boiling point/Boiling range: Not determined. Danger of explosion: Product does not present an explosion hazard. Self-igniting: Product is not self - igniting. Solubility in / Miscibility with water: Soluble. Density at 20 °C: 0.90-1.04 g/cm³ Vapour density Not applicable. Vapour pressure: Not applicable.

SECTION 10: Stability & Reactivity

10.1 Reactivity: No further relevant information available. 10.2 Chemical stability: Stable under normal handling and storage conditions. Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications. 10.3 Possibility of hazardous reactions No dangerous reactions known. 10.4 Conditions to avoid No further relevant information available. 10.5 Incompatible materials: No further relevant information available. Page 5 of 6 Quality manufacturers of bath & body care products – made in Australia

10.6 Hazardous decomposition products: None under normal conditions of storage and use.

SECTION 11: Toxicology Information

11.1 Information on toxicological effects: No adverse health effects expected if the product is handled in accordance with this safety data sheet and the product label. Product is safe for its intended use based on the formulation, testing results and the history of safe consumer use.

Acute toxicity: No LD50 data available for this product

Primary irritant effect: On the skin: No irritant effect On the eye: No irritating effect Carcinogen Classification: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed carcinogen by IARC

SECTION 12: Ecological Information

12.1 Ecotoxicity: Avoid contaminating waterways

12.2 Persistence/degradability: No tested data available on this product.

12.3 Bioaccumulative potential: This product shows a low bioaccumulation potential

12.4 Mobility: Prevent contamination of soil, ground and surface water.

Section 13: Disposals Consideration

Disposal Methods: Refer to Waste Management Authority. Dispose of contents/containers in accordance with local/regional/national/international regulations.

SECTION 14: Transport Information

ADG 7.3 Land Transport of Dangerous Goods Labels required: No special requirements UN Number: N/A Proper Shipping Name: N/A DG Class: N/A Subsidiary Risk: None Packing Group: N/A HAZCHEM Code: N/A Special Provision: N/A

Page 6 of 6 Quality manufacturers of bath & body care products – made in Australia

MARITIME TRANSPORTATION AIR TRANSPORTATION IMCD IATA Dangerous Goods Regulations (DGR) 56th Edition 2015 IMCD: N/A ICAO/IATA Class: N/A Label: N/A Label: N/A UN Number: N/A UN Number: N/A Packaging Group: Not allocated Packaging Group: N/A EMS Number: N/A Marine Pollutant: Not allocated Proper Shipping Name: As above Proper Shipping Name: As above Special Provisions; N/A Special Provisions; N/A

SECTION 15: Regulatory Information

POISONS SCHEDULE (SUSMP): Not subject to labelling

All ingredients in this product are compliant with NICNAS AICS: regulations

SECTION 16: OTHER INFORMATION

The information herein is accurate to the best of our knowledge. However, it is meant to describe safety requirements of our products, thus this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. No warranty is expressed or made as to this document’s accuracy, reliability or completeness. User has the sole responsibility to determine the suitability of the materials for any use and the manner of use contemplated.

Relevant phrases Non relevant

Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) AICS: Australian Inventory of Chemical substances NICNAS: National Industrial Chemical Notification & Assessment Scheme IARC: International Agency for Research Cancer

MSDS prepared by: Natural Beauty Care Pty. Ltd. Issue Date: 14/06/2016 Revision Number: 1 END OF MSDS SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

SAFETY DATA SHEET

Section 1: IDENTIFICATION:

PRODUCT NAME: Eleven Detangle My Hair Other means of Identification: Personal care product, conditioning

Name and Address of Responsible Parties:

Company Name: Eleven Australia Pty Ltd 7 Endeavour Way Sunshine West VIC 3020

Section 2: Hazards Identification:

Classification of the Chemical: White liquid

This material is not classified as hazardous under OSHA regulations (29 CFR 1910.1200) (Hazcom 2012).

Hazardous Classification: Not a hazardous substance or mixture

Label elements:

Signal Word: Not a hazardous substance or mixture

Hazardous Statement: Not a hazardous substance or mixture

Precautionary Statement: Not a hazardous substance or mixture

Hazard Pictogram(s):

Not applicable

Other Hazards not otherwise classified:

Not applicable

Page 1 of 9

SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

Section 3: Composition / Information on Ingredients

INGREDIENTS CAS No. %w/w Contents Cetrimonium Chloride 112-02-7 <1.00

Amodimethicone 68554-54-1 <1.00 Other ingredients to 100

• Note: the exact concentrations of the chemical(s) above are being withheld as a trade secret.

Section 4: First Aid measures

First Aid measures:

HEALTH EFFECTS:

ACUTE EFFECTS:

Swallowed: Low toxicity by oral route Eye: Splashes in the eye may cause stinging sensation and tears. Transient reddening of the eye may also occur. Seek medical attention. Skin: Prolonged and repeated skin contact should be avoided Inhaled: No appreciable irritation is expected by this route

CHRONIC EFFECTS: May produce dermatitis on repeated or prolonged contact with skin.

Advice to doctor: Treat Symptomatically

Section 5: Fire-Fighting Measures

Suitable Extinguishing Media: Water spray, foam, dry agents (carbon dioxide, dry chemical powder)

Unsuitable Extinguishing media: None established

Specific Hazard: None established

Precautions for fire Fighters and special Page 2 of 9

SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

Protective equipment: Evacuate area in case of overheating or fire. Use water spray to keep fire exposed containers cool. Self contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals.

Hazchem code: N/A

Section 6: Accidental Release measures

Emergency Procedures: Absorb spill with earth, sand or other non-combustible material. Use clean non sparking tools to collect material and place it in loosely covered metal or plastic containers for later disposal.

Methods and Materials For containment and Clean up procedure: Observe all personal protective equipment recommendations described in the MSDS. Clean up remaining materials from spill with suitable absorbent. Clean area as appropriate since spilled materials, even in small quantities, may prevent slip hazard. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbent or cleaning materials appropriately, since spontaneous heating may occur. Laws and regulations may apply to release and disposal of this material, as well as those materials and items employed in the cleanup of releases. You will need to determine which laws and regulations are applicable.

Section 7: Handling and Storage

STORAGE AND TRANSPORT: Store product upright in a cool place SPILLS AND DISPOSAL: Spills are slippery. Remove possible leaking containers. Mop up small spills. For larger spills absorb in inert material (sand.) Dispose in accordance with local regulations. FIRE / EXPLOSION HAZARDS: Will not burn. Not considered a significant risk.

Page 3 of 9

SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

Section 8: Exposure controls / Personal protection

INGREDIENTS ACGIH-TLV OSHA-PEL Cetrimonium Chloride No exposure limit value No exposure limit value known known Amodimethicone No exposure limit value No exposure limit value known known

*Worksafe Australia Exposure Standards

ENGINEERING CONTROLS: None required

Personal Protective Equipment:

Ventilation and Engineering measures: use in well ventilated area. Apply technical measures to comply with occupational exposure limits if needed

Respiratory measures: If airborne concentrations are above the permissible exposure limit use NIOSH approved respirators.

Skin Protection: Gloves (vinyl, rubber or plastic) are recommended if prolonged contact with product is envisaged

Eye/ Face Protection: Protect eyes when using

Other Protective Equipment: Ensure that eyewash stations and a safety shower are close to the work station(s)

General hygiene considerations: Avoid contact with eyes and clothing. Do not eat, drink or smoke when using this product. Wash hands after handling. Remove and wash all contaminated clothing before re-use. Handle in accordance with good industrial hygiene and safety practice.

Page 4 of 9

SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

Section 9: Physical and Chemical Properties

Appearance: flowing powder Odour: meets standard pH @20c: 4.50 – 5.50 Melting / Freezing Point: Not available Boiling Point and boiling range: Not available Flash point: Not available Flammability (method determination): Not available Lower flammability limit (% by vol): Not available Upper flammability limit (% by vol): Not available Vapour pressure: Not available Vapour density: Not available Relative density: 1.00 - 1.01 Solubility in water: Complete Partition Coefficient (n-octanol/water): Not available Auto ignition temperature: Not available Decomposition temperature: Not available Viscosity: Not available Volatiles (% by wt) = Not available Volatile organic compounds: Not available Other physical / chemical comments: No addition information

Section 10: Stability and Reactivity

Chemical Stability: Stable Conditions to avoid: None known. Incompatible Materials: None known. Hazardous Decomposition Products: None Known.

Hazardous Reactions: will not occur

Section 11: Toxicological Information

Inhalation: Inhalation of product vapours will cause irritation of the nose, throat and respiratory system.

Ingestion: Harmful if swallowed. Liable to irritate mouth and gastrointestinal tract, causing abdominal pain, nausea and vomiting

Page 5 of 9

SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

Skin: Primary irritant. Repeated or prolonged contact may lead to dermatitis

Eye: Eye contact may cause stinging, blurring, tearing or severe pain.

Chronic Effects: No data supplied

Section 12: Ecological Information

Environmental fate and Distribution:

Eco toxicity: No acute fish toxicity (96h) is predicted. May cause long term adverse effects in the aquatic environment

Disposal Considerations:

Disposal method: Dispose of in accordance with local regulations.

Special Precautions for Landfill or Incineration: None known

Section 13: Disposal Information

Handling for disposal: Handle in accordance with good industrial hygiene and safety practice. Refer to protective measures listed in sections 7 and 8

Method of disposal: Dispose of according to relevant local, state and federal government regulations.

Section 14: Transport Information

Page 6 of 9

SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

Transport Information: Not classified as Dangerous goods, according to the Australian code of the transport of Dangerous Goods by Road and Rail.

Section 15: Regulatory Information

Regulatory Information: Australia: Not classified as Hazardous according to the criteria of National Occupational Health and Safety Commission (NOHSC), Australia. Not classified as a scheduled poison according to the Standard for the Uniform Scheduling of Drugs and Poisons(SUSDP)

Poison Schedule: Not scheduled

National and or International Regulatory Information: New Zealand: Not classified as Hazardous according to the New Zealand Hazardous Substances (minimum degree of hazard) Regulations 2001. .

US 49 CFR/DOT Hazard Classification:

UN No: Not DOT regulated UN Proper shipper name:

Special transportation Notes: None

DOT Marine Pollutants: This product does not contain Marine Pollutants as defined in CFR 49 171.8.

IMDG/IMO Code Shipping Classification:

UN No: Not IMDG Regulated UN Proper Shipping name: Not classified as a marine pollutant

US Federal Information: TSCA: All listed ingredients appear on the toxic substances control act

US CERCLA Reportable quantity (RQ): None

SARA Title III: Sec.302, Extremely Hazardous Substances, 40 CFR 355:

No Extremely hazardous substances are present in this material

SARA Title III: Sec.311 and 312, MSDS Requirements, 40 CFR 370 Hazard Classes:

Page 7 of 9

SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

Reactive Hazard, Acute Health Hazard, Chorionic Health Hazard. Under SARA Section 311 and 312, the EPA has established threshold quantities for the reporting of hazardous chemicals. The current threshold are 500 pounds for the threshold planning quantity (TPQ), whichever is lower, for extremely hazardous substances and 10,000 pounds for all other hazardous chemicals.

SARA Title III: Sec 313, Toxic Chemicals Notification, 40 CFR 372:

This product does not contain any chemicals that require notification

State Regulations:

California Proposition 65: This product does not contain a chemical known to the State of California to cause, birth defects, reproductive harm or cancer

International Information:

Canadian Environmental Protection Act (CEPA) Information: All ingredients listed appear on the Domestic Substances List (DSL)

Section 16: Other Information

HMIS – Hazardous Materials Identification System

Health – 1 Flammability – 0 Physical Hazard – 0 PPE – B

NFPA – National Fire Protection Association

Health – 1 Flammability – 0 Reactivity – 0

Abbreviations legend;

ACGIH: American Conference of Government Industrial Hygienist CAS: Chemical abstract Services CERCLA: Comprehensive Environmental Response, Compensation, and Liability Act of 1986 CFR: Code of Federal Regulations CSA: Canadian Standards Association DOT: Department of Transportation ECOTOX: U.S. EPA Ecotoxicology Database EINECS: European Inventory of Existing Commercial Chemical substance EPA: Environmental Protection agency HSDB: Hazardous substances database IARC: International Agency for Research on Cancer IBC: Intermediate Bulk Container IUCLID: International Uniform Chemical Information Database LC: Lethal concentration LD: Lethal dose NIOSH: National Institute of Occupational Safety and Health Page 8 of 9

SDS – Eleven Detangle My Hair Preparation Date: 14 May 2019

NTP: National Toxicology Program OECD: Organization for Economic Cooperation and Development PEL: Permissible exposure limit RCRA: Resource Conservation and Recovery Act RTECS: Registry of Toxic Effects of Chemical Substances SARA: Superfund Amendments and Reauthorization Act SDS: Safety Data Sheet STEL: Short term exposure limit TDG: Canadian Transportation of Dangerous Goods Act & Regulations TLV: Threshold Limit Values TWA: Time Weighted Average WHMIS: Workplace Hazardous Materials Identification System

Disclaimer:

The information continued herein based on the manufacturers own study and the work of others, implied, as to the accuracy, completeness or adequacy of the information contained herein, and neither the provider nor the manufacturer are liable to any party for any damages of any nature, including direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of any information in the SDS, or in any other way related (directly or indirectly)to this SDS. The information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not valid for such material used in combination with any other material or in any other process

Date of preparation or Last revision of SDS 14 May 2019 (updated to GHS format)

End of Document

Page 9 of 9