DOCSLIB.ORG

Keysight M9037A Pxie Embedded Controller

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Keysight M9037A Pxie Embedded Controller User Guide Keysight M9037A PXIe Embedded Controller Notices © Keysight Technologies, Inc. 2014 Sales and Technical Support Warranty No part of this manual may be repro- To contact Keysight for sales and techni- THE MATERIAL CONTAINED IN THIS duced in any form or by any means cal support, refer to the support links on DOCUMENT IS PROVIDED “AS IS,” AND (including electronic storage and retrieval the following Keysight websites: IS SUBJECT TO BEING CHANGED, or translation into a foreign language) WITHOUT NOTICE, IN FUTURE EDI- without prior agreement and written con- www.keysight.com/find/M9195A (prod- TIONS. FURTHER, TO THE MAXIMUM sent from Keysight Technologies, Inc. as uct-specific information and support, EXTENT PERMITTED BY APPLICABLE governed by United States and interna- software and documentation updates) LAW, KEYSIGHT DISCLAIMS ALL WAR- tional copyright laws. www.keysight.com/find/assist (world- RANTIES, EITHER EXPRESS OR IMPLIED, wide contact information for repair and WITH REGARD TO THIS MANUAL AND Manual Part Number service) ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED M9037-90005 Information on preventing damage to TO THE IMPLIED WARRANTIES OF MER- your Keysight equipment can be found at CHANTABILITY AND FITNESS FOR A Edition www.keysight.com/find/tips. PARTICULAR PURPOSE. KEYSIGHT SHALL NOT BE LIABLE FOR ERRORS OR Third Edition, September 2014 Declaration of Conformity FOR INCIDENTAL OR CONSEQUENTIAL Printed in Malaysia DAMAGES IN CONNECTION WITH THE Declarations of Conformity for this prod- FURNISHING, USE, OR PERFORMANCE uct and for other Keysight products may OF THIS DOCUMENT OR OF ANY INFOR- Keysight Technologies, Inc. be downloaded from the Web. Go to MATION CONTAINED HEREIN. SHOULD 1400 Fountaingrove Parkway http://keysight.com/go/conformity and KEYSIGHT AND THE USER HAVE A SEP- Santa Rosa, CA 95403 USA click on “Declarations of Conformity.” You ARATE WRITTEN AGREEMENT WITH can then search by product number to WARRANTY TERMS COVERING THE find the latest Declaration of Conformity. MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE Technology Licenses WARRANTY TERMS IN THE SEPARATE AGREEMENT SHALL CONTROL. The hardware and/or software described Keysight Technologies does not warrant in this document are furnished under a third-party system-level (combination of license and may be used or copied only in chassis, controllers, modules, etc.) per- accordance with the terms of such Trademarks formance, safety, or regulatory compli- license. ance unless specifically stated. AXIe is a registered trademark of the AXIe Consortium. DFARS/Restricted Rights PXI is a registered trademark of the PXI Notices Systems Alliance. If software is for use in the performance PICMG®, Compact PCI®, and ® of a U.S. Government prime contract or AdvancedTCA are registered trade- subcontract, Software is delivered and marks of the PCI Industrial Computer licensed as “Commercial computer soft- Manufacturers Group. ware” as defined in DFAR 252.227-7014 ® ® ® (June 1995), or as a “commercial item” as PCI-SIG , PCI Express , and PCIe are registered trademarks of PCI-SIG. defined in FAR 2.101(a) or as “Restricted computer software” as defined in FAR 52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or disclosure of Software is subject to Keysight Technologies’ stan- dard commercial license terms, and non- DOD Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987). U.S. Gov- ernment users will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227- 7015 (b)(2) (November 1995), as applica- ble in any technical data. Safety Information The following general safety precau- Do Not Remove Instrument Cover tions must be observed during all Only qualified, service-trained person- phases of operation of this instrument. nel who are aware of the hazards Failure to comply with these precau- involved should remove instrument tions or with specific warnings or oper- covers. Always disconnect the power Do NOT block vents and fan exhaust: ating instructions in the product cable and any external circuits before To ensure adequate cooling and venti- manuals violates safety standards of removing the instrument cover. lation, leave a gap of at least 50mm design, manufacture, and intended use (2") around vent holes on both sides of of the instrument. Keysight Technolo- Keep away from live circuits the chassis. gies assumes no liability for the cus- tomer's failure to comply with these Operating personnel must not remove Do NOT operate with empty slots: To requirements. equipment covers or shields. Proce- ensure proper cooling and avoid dam- dures involving the removal of covers aging equipment, fill each empty slot and shields are for use by service- with an AXIe filler panel module. General trained personnel only. Under certain Do NOT stack free-standing chassis: Do not use this product in any manner not conditions, dangerous voltages may exist even with the equipment Stacked chassis should be rack- specified by the manufacturer. The protec- switched off. To avoid dangerous elec- mounted. tive features of this product must not be trical shock, DO NOT perform proce- All modules are grounded through the impaired if it is used in a manner specified in dures involving cover or shield removal chassis: During installation, tighten the operation instructions. unless you are qualified to do so. each module's retaining screws to Before Applying Power DO NOT operate damaged secure the module to the chassis and to make the ground connection. Verify that all safety precautions are taken. equipment Make all connections to the unit before Whenever it is possible that the safety applying power. Note the external markings protection features built into this prod- described under “Safety Symbols”. uct have been impaired, either through physical damage, excessive moisture, Ground the Instrument or any other reason, REMOVE POWER Keysight chassis’ are provided with a and do not use the product until safe grounding-type power plug. The operation can be verified by service- Operator is responsible to maintain instrument chassis and cover must be trained personnel. If necessary, return safe operating conditions. To ensure connected to an electrical ground to the product to an Keysight Technolo- safe operating conditions, modules minimize shock hazard. The ground pin gies Sales and Service Office for ser- should not be operated beyond the full must be firmly connected to an electri- vice and repair to ensure the safety temperature range specified in the cal ground (safety ground) terminal at features are maintained. Environmental and physical specifica- the power outlet. Any interruption of tion. Exceeding safe operating condi- the protective (grounding) conductor DO NOT block the primary tions can result in shorter lifespan, or disconnection of the protective disconnect improper module performance and user safety issues. When the modules earth terminal will cause a potential The primary disconnect device is the are in use and operation within the shock hazard that could result in per- appliance connector/power cord when specified full temperature range is not sonal injury. a chassis used by itself, but when maintained, module surface tempera- installed into a rack or system the dis- tures may exceed safe handling condi- Do Not Operate in an Explosive connect may be impaired and must be tions which can cause discomfort or Atmosphere considered part of the installation. Do not operate the module/chassis in burns if touched. In the event of a the presence of flammable gases or Do Not Modify the Instrument module exceeding the full temperature fumes. range, always allow the module to cool Do not install substitute parts or per- before touching or removing modules form any unauthorized modification to Do Not Operate Near Flammable from the chassis. Liquids the product. Return the product to an Keysight Sales and Service Office to Do not operate the module/chassis in ensure that safety features are main- the presence of flammable liquids or tained. near containers of such liquids. In Case of Damage Cleaning Instruments that appear damaged or Clean the outside of the Keysight mod- defective should be made inoperative ule/chassis with a soft, lint-free, and secured against unintended oper- slightly dampened cloth. Do not use ation until they can be repaired by detergent or chemical solvents. qualified service personnel iv Safety Symbols A CAUTION denotes a hazard. It calls attention to an operating pro- cedure or practice, that, if not cor- The CSA mark is a registered trade- rectly performed or adhered to mark of the Canadian Standards Asso- South Korean Class A EMC Declara- could result in damage to the ciation and indicates compliance to tion. this equipment is Class A suitable product or loss of important data. the standards laid out by them. Refer for professional use and is for use in Do not proceed beyond a CAUTION to the product Declaration of Confor- electromagnetic environments outside notice until the indicated condi- mity for details. of the home. tions are fully understood and met. Notice for European Community: This product complies with the relevant A WARNING denotes a hazard. It European legal Directives: EMC Direc- calls attention to an operating pro- tive (2004/108/EC) and Low Voltage cedure or practice, that, if not cor- Directive (2006/95/EC). rectly performed or adhered to, could result in personal injury or death. Do not proceed beyond a Waste Electrical and WARNING notice until the indi- Electronic cated conditions are fully under- Equipment (WEEE) stood and met. The Regulatory Compliance Mark Directive Products display the following sym- (RCM) mark is a registered trademark. 2002/96/EC bols: This signifies compliance with the Aus- tralia EMC Framework regulations This product complies with the WEEE under the terms of the Radio Commu- Directive (2002/96/EC) marking Warning, risk of electric nication Act of 1992.
Load more

Recommended publications
  • Coreboot - the Free Firmware
    coreboot - the free firmware vimacs <https://vimacs.lcpu.club> Linux Club of Peking University May 19th, 2018 . vimacs (LCPU) coreboot - the free firmware May 19th, 2018 1 / 77 License This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/. You can find the source code of this presentation at: https://git.wehack.space/coreboot-talk/ . vimacs (LCPU) coreboot - the free firmware May 19th, 2018 2 / 77 Index 1 What is coreboot? History Why use coreboot 2 How coreboot works 3 Building and using coreboot Building Flashing 4 Utilities and Debugging 5 Join the community . vimacs (LCPU) coreboot - the free firmware May 19th, 2018 3 / 77 Index 6 Porting coreboot with autoport ASRock B75 Pro3-M Sandy/Ivy Bridge HP Elitebooks Dell Latitude E6230 7 References . vimacs (LCPU) coreboot - the free firmware May 19th, 2018 4 / 77 1 What is coreboot? History Why use coreboot 2 How coreboot works 3 Building and using coreboot Building Flashing 4 Utilities and Debugging 5 Join the community . vimacs (LCPU) coreboot - the free firmware May 19th, 2018 5 / 77 What is coreboot? coreboot is an extended firmware platform that delivers a lightning fast and secure boot experience on modern computers and embedded systems. As an Open Source project it provides auditability and maximum control over technology. The word ’coreboot’ should always be written in lowercase, even at the start of a sentence. vimacs (LCPU) coreboot - the free firmware May 19th, 2018 6 / 77 History: from LinuxBIOS to coreboot coreboot has a very long history, stretching back more than 18 years to when it was known as LinuxBIOS.
    [Show full text]
  • A MICROCHIP TECHNOLOGY INC. PUBLICATION Intruder Proof
    A MICROCHIP TECHNOLOGY INC. PUBLICATION SEPT/OCT 2015 Intruder Proof Driving the 8-bit Bidirectional 6 19 MCU Evolution 27 IoT A MICROCHIP TECHNOLOGY INC. PUBLICATION SEPT/OCT 2015 COVER STORY NEW TOOLS Driving the 8-bit MCU Evolution 4 Satisfy Your Curiosity 19 New Development Board Provides Cost-Effective and Fully Integrated Entry into Designing with Microchip’s 8-bit PIC® Microcontrollers TECHNOLOGY 21 MOST® Technology in the News NEW PRODUCTS 6 Intruder Proof Latest Family of eXtreme Low Power PIC Microcontrollers DESIGN CORNER Offers Double the Flash Memory and New Security Options 23 Tired of Embedded Design Bottlenecks? 8 More to Love New Additions to Popular PIC32MX and PIC32MZ 25 Overcoming a Noisy World Families Offer Wide Variety of Features for Designers of Next-Generation Embedded Systems 27 Bidirectional IoT 10 A Connector Revolution 29 Blast Off! Cost-Effective UTC2000 Supports Radically Updated USB-C™ Connector 32 Defying the Odds 11 Seamless Migration New Family of Highly Configurable, Low-Power Embedded DEV TOOL DEALS Controllers Allows Mobile Computing Designers to Easily A Harvest of Savings Reuse IP Across Multiple x86 Platforms 22 13 Advanced Industrial Connectivity Enhanced Industrial Ethernet Switches Feature IEEE 1588-2008 Precision Time Protocol and Low-Power Options Is it Hot in Here? 15 contents Save Design Effort, Space and Cost with the New MCP9600 Integrated Thermocouple to Degrees Celsius Converter 17 Simple Solution Industry’s First MOST150 Coaxial Transceiver Enables Powerful, Robust and Cost-Efficient Automotive Infotainment Networks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MOST, MPLAB, mTouch, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A.
    [Show full text]
  • System Management Bus(Smbus)Specification
    System Management Bus (SMBus) Specification Version 3.1 19 Mar 2018 www.powerSIG.org © 2018 System Management Interface Forum, Inc. – All Rights Reserved Filename: SMBus 3_1_20180319.docx Last Saved: 19 March 2018 09:31 System Management Bus (SMBus) Specification Version 3.1 This specification is provided “as is” with no warranties whatsoever, whether express, implied or statutory, including but not limited to any warranty of merchantability, non-infringement or fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification or sample. In no event will any specification co-owner be liable to any other party for any loss of profits, loss of use, incidental, consequential, indirect or special damages arising out of this specification, whether or not such party had advance notice of the possibility of such damages. Further, no warranty or representation is made or implied relative to freedom from infringement of any third party patents when practicing the specification. Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owner’s benefit, without intent to infringe. Revision No. Date Notes Editor 1.0 15 Feb 1995 General Release Robert Dunstan 1.1 11 Dec 1998 Version 1.1 Release Robert Dunstan 2.0 3 Aug 2000 Version 2.0 Release Robert Dunstan 3.0 20 Dec 2014 Version 3.0 Release Robert V. White Embedded Power Labs 3.1 19 Mar 2018 Version 3.1 Release Robert V. White Embedded Power Labs Questions and comments regarding this For additional information on Smart Battery System specification may be forwarded to: Specifications, visit the SBS Implementer’s Forum [email protected] (SBS-IF) at: www.sbs-forum.org © 2018 System Management Interface Forum, Inc.
    [Show full text]
  • Dell Trusted Device Below the OS Whitepaper
    Client Solutions Dell Trusted Device: BIOS Security An introduction to the Dell Trusted Device BIOS and security features. Author: Rick Martinez © 2020 Dell Inc. or its subsidiaries. All Rights Reserved. Dell, EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Initial Release – September 2020 Table of Contents Executive summary 3 The Key Elements of Dell BIOS Security 4 What is BIOS? What is UEFI? . 4 The Importance of “Below the OS” Security . 5 NIST Cybersecurity Framework . 6 Identify 6 Identity and Asset Management Tags . 6 SDL 7 Secure Design Processes and SDL . 8 Industry Affiliations . .8 “Below the OS” Threat Modeling . 8 Protect 9 The PC Boot Process . 9 UEFI Secure Boot Expert Mode . 11 Signed Firmware Update. .11 NIST SP800-147 Support . 12 Mitigating SMM Threats with Intel BIOS Guard . 12 What is SMM? . 12 Mitigation: Intel BIOS Guard . 13 BIOS Patch Management . 13 BIOS Downgrade Protection . 14 Embedded Controller: Signed Firmware . 14 Protecting BIOS Configuration. 14 Protecting BIOS at Runtime . 17 Detect 19 Intel Boot Guard . 19 SafeBIOS Verification . 20 BIOS Indicators of Attack . 21 Chassis Intrusion . 22 TCG Measured Boot . 22 Recover 24 Embedded Controller Recovery . 24 BIOS Recovery . 24 Dell Data Wipe . 26 Supply Chain Assurance 27 Protected Signing Infrastructure. 27 The Future of Security 28 Appendix 29 Referenced Links. 29 Learn More 30 Acknowledgements . 30 About the author. 30 Executive summary Computer security is a multi-billion dollar business with thousands of companies competing for organizations’ attention and enterprise dollars. Dell Technologies has created an innovative and effective portfolio of technologies and solutions in this industry to help organizations secure their enterprises.
    [Show full text]
  • Dspic® Digital Signal Controllers
    dsPIC® Digital Signal Controllers dsPIC® Digital Signal Controllers www.microchip.com/DSC Digital Signal Controller Solutions Building on the legacy of Microchip’s world-leading 8-bit PIC® microcontrollers, 16-bit dsPIC® Digital Signal Controllers (DSCs) deliver a large product portfolio to make your demanding applications more competitive by providing lower system cost and improved effi ciency. A Digital Signal Controller (DSC) is a single-chip embedded controller that seamlessly integrates the control attributes of a microcontroller (MCU) with the computation and throughput capabilities of a Digital Signal Processor (DSP). Reduce Development Risk Save System Cost Natural step up for 8-bit MCU users needing more Simplify your design through integration performance/memory and effi ciency ■ Industry’s largest DSC portfolio for optimal product fi t ■ Best in class ‘C’ effi ciency enables reduced Flash size ■ Extensive software and application design support ■ Low pin count packages provide lower product cost ■ Same Integrated Development Environment for ■ Replace complex analog fi lters with digital fi lters 8/16/32-bit MCUs ■ Highly Integrated DSCs reduce external components ■ Extensive web seminars and training courses Discover New Design Options Complete Project on Schedule Transform ideas into reality Leverage existing software, unprecedented ■ Add powerful features with DSC capabilities compatibility and powerful graphical tools ■ Employ advanced algorithms to improve effi ciency ■ Free software, code examples and peripheral libraries ■ Explore
    [Show full text]
  • Intel® Chipsets Low Pin Count Interface Specification
    R Intel® Low Pin Count (LPC) Interface Specification August 2002 Revision 1.1 Document Number: 251289-001 Introduction R Information in this document is provided in connection with Intel® products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. THIS SPECIFICATION IS PROVIDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.Intel disclaims all liability, including liability for infringement of any proprietary rights, relating to use of informa tion in this specification.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted herein, except that a li cense is hereby granted to copy and reproduce this specification for internal use only.
    [Show full text]
  • Reduce Firmware Booting Time in Multi-Threaded Environment
    Open Source Firmware Development Reduce Firmware Booting Time Using Multi- Threaded Environment White Paper Revision 001 January 2019 Document Number: 338658-001 You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter disclosed herein. No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document. Intel technologies’ features and benefits depend on system configuration and may require enabled hardware, software or service activation. Learn more at Intel.com, or from the OEM or retailer. No computer system can be absolutely secure. Intel does not assume any liability for lost or stolen data or systems or any damages resulting from such losses. The products described may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade. Intel technologies’ features and benefits depend on system configuration and may require enabled hardware, software or service activation. Learn more at intel.com, or from the OEM or retailer. All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product specifications and roadmaps.
    [Show full text]
  • M9536A Axie Embedded Controller
    Startup Guide Keysight M9536A AXIe Embedded Controller Notices © Keysight Technologies, Inc. 2011 - Sales and Technical Support Warranty 2014 To contact Keysight for sales and techni- THE MATERIAL CONTAINED IN THIS No part of this manual may be repro- cal support, refer to the support links on DOCUMENT IS PROVIDED “AS IS,” AND duced in any form or by any means the following Keysight websites: IS SUBJECT TO BEING CHANGED, (including electronic storage and retrieval WITHOUT NOTICE, IN FUTURE EDI- or translation into a foreign language) www.keysight.com/find/9536A (product- TIONS. FURTHER, TO THE MAXIMUM without prior agreement and written con- specific information and support, soft- EXTENT PERMITTED BY APPLICABLE sent from Keysight Technologies, Inc. as ware and documentation updates) LAW, KEYSIGHT DISCLAIMS ALL WAR- governed by United States and interna- RANTIES, EITHER EXPRESS OR IMPLIED, tional copyright laws. www.keysight.com/find/assist (world- wide contact information for repair and WITH REGARD TO THIS MANUAL AND service) ANY INFORMATION CONTAINED Manual Part Number HEREIN, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MER- M9536-90001 Declaration of Conformity CHANTABILITY AND FITNESS FOR A Declarations of Conformity for this prod- PARTICULAR PURPOSE. KEYSIGHT Edition uct and for other Keysight products may SHALL NOT BE LIABLE FOR ERRORS OR be downloaded from the Web. Go to FOR INCIDENTAL OR CONSEQUENTIAL Seventh Edition, December 2014 http://keysight.com/go/conformity and DAMAGES IN CONNECTION WITH THE Printed in Malaysia click on “Declarations of Conformity.” You FURNISHING, USE, OR PERFORMANCE can then search by product number to OF THIS DOCUMENT OR OF ANY INFOR- find the latest Declaration of Conformity.
    [Show full text]
  • UNIT-I - OVERVIEW of EMBEDDED SYSTEMS Embedded System
    UNIT-I - OVERVIEW OF EMBEDDED SYSTEMS Embedded System . An embedded system can be thought of as a computer hardware system having software embedded in it. An embedded system can be an independent system or it can be a part of a large system. An embedded system is a microcontroller or microprocessor based system which is designed to perform a specific task. For example, a fire alarm is an embedded system; it will sense only smoke. An embedded system has three components − It has hardware. It has application software. It has Real Time Operating system (RTOS) that supervises the application software and provide mechanism to let the processor run a process as per scheduling by following a plan to control the latencies. RTOS defines the way the system works. It sets the rules during the execution of application program. A small scale embedded system may not have RTOS. So we can define an embedded system as a Microcontroller based, software driven, reliable, real-time control system. Characteristics of an Embedded System Single-functioned − An embedded system usually performs a specialized operation and does the same repeatedly. For example: A pager always functions as a pager. Tightly constrained − All computing systems have constraints on design metrics, but those on an embedded system can be especially tight. Design metrics is a measure of an implementation's features such as its cost, size, power, and performance. It must be of a size to fit on a single chip, must perform fast enough to process data in real time and consume minimum power to extend battery life.
    [Show full text]
  • SMBIOS) Reference 6 Specification
    1 2 Document Identifier: DSP0134 3 Date: 2018-04-26 4 Version: 3.2.0 5 System Management BIOS (SMBIOS) Reference 6 Specification 7 Supersedes: 3.1.1 8 Document Class: Normative 9 Document Status: Published 10 Document Language: en-US 11 System Management BIOS (SMBIOS) Reference Specification DSP0134 12 Copyright Notice 13 Copyright © 2000, 2002, 2004–2016 Distributed Management Task Force, Inc. (DMTF). All rights 14 reserved. 15 DMTF is a not-for-profit association of industry members dedicated to promoting enterprise and systems 16 management and interoperability. Members and non-members may reproduce DMTF specifications and 17 documents, provided that correct attribution is given. As DMTF specifications may be revised from time to 18 time, the particular version and release date should always be noted. 19 Implementation of certain elements of this standard or proposed standard may be subject to third party 20 patent rights, including provisional patent rights (herein "patent rights"). DMTF makes no representations 21 to users of the standard as to the existence of such rights, and is not responsible to recognize, disclose, 22 or identify any or all such third party patent right, owners or claimants, nor for any incomplete or 23 inaccurate identification or disclosure of such rights, owners or claimants. DMTF shall have no liability to 24 any party, in any manner or circumstance, under any legal theory whatsoever, for failure to recognize, 25 disclose, or identify any such third party patent rights, or for such party’s reliance on the standard or 26 incorporation thereof in its product, protocols or testing procedures.
    [Show full text]
  • SBC35-427 Supplemental BIOS Manual
    SBC35-427 Supplemental BIOS Manual WinSystems, Inc. | 715 Stadium Drive, Arlington, Texas 76011 | 817-274-7553 | [email protected] | www.winsystems.com SBC35-427 Revision History Last Updated BIOS Version Brief Description of Change Date 42719177 1/1/19 Initial release Copyright and Trademarks Copyright 2019, WINSYSTEMS, Inc. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of WINSYSTEMS, Inc. The information in the document is subject to change without notice. The information furnished by WINSYSTEMS, Inc. in this publication is believed to be accurate and reliable. However, WINSYSTEMS, Inc. makes no warranty, express, statutory, implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. WINSYSTEMS, Inc. makes no warranty of merchantability or fitness for any purpose. WINSYSTEMS, Inc. assumes no responsibility for any errors that may appear in this document. Trademark Acknowledgments WINSYSTEMS is a registered trademark of WINSYSTEMS, Inc. Intel and Intel Atom are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. All other marks are the property of their respective companies. v1.0 www.winsystems.com Page 2 SBC35-427 1 Introduction . 5 1.1 References . .5 1.2 Glossary. .5 2 BIOS Update with UEFI Shell . 5 2.1 Scope . .5 2.2 Process . .6 3 Embedded Controller (EC) Update with UEFI Shell. 7 3.1 Process . .7 4 BIOS Settings . 8 4.1 Entering the BIOS . .8 4.2 Main . .8 4.3 Configuration .
    [Show full text]
  • Imm Tps 12.Pdf
    Intel® Management Module Technical Product Specification Revision 1.1 October, 2006 Enterprise Platforms and Services Division - Marketing Revision History Intel® Management Module Revision History Date Revision Modifications Number March 2005 0.7 Initial release. April 2005 0.9 Preliminary draft release June 2005 1.0 Released version October 2006 1.1 Updated Section 5.6, SNMP Disclaimers Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. This document contains information on products in the design phase of development. Do not finalize a design with this information. Revised information will be published when the product is available. Verify with your local sales office that you have the latest datasheet before finalizing a design.
    [Show full text]