Aerojet Announces Successful Requalification of Its Delta II AJ10-118K Second Stage Engine

Total Page：16

File Type：pdf, Size：1020Kb

March 14, 2013 Aerojet Announces Successful Requalification of Its Delta II AJ10-118K Second Stage Engine SACRAMENTO, Calif., March 14, 2013 (GLOBE NEWSWIRE) -- Aerojet, a GenCorp (NYSE:GY) company, announced that its Delta II second stage engine, the AJ10-118K, successfully passed a requalification test of its ablative chamber at Aerojet's J4 altitude simulation test facility in Sacramento. The intent of the requalification program was to replace the asbestos insulator material with a readily-available and environmentally-friendly alternative. The three-burn hot fire test simulated a "test-like-you-fly" duty cycle configuration, qualifying the new engine configuration for flight. The altitude test was preceded by a successful sea-level test in November 2012. "The Delta II is one of the most robust and reliable rocket engines ever flown," said Aerojet Vice President of Space and Launch Systems Julie Van Kleeck. "This test represents another successful milestone in a program with a rich history of successful milestones and 100 percent mission success. Additionally, it verifies that the past design rigor put into this heritage technology meets and exceeds the scrutiny of modern day expectations for flight." Under contract to United Launch Alliance, Aerojet's AJ10 has provided second-stage propulsion on 151 Delta II flights to date with a 100 percent success rate. The engine has helped deliver payloads for NASA's space exploration efforts such as the Phoenix Mars Lander, Mars Polar Lander, Deep Impact, Kepler, NEAR Shoemaker and the Mars Exploration Rovers, Spirit and Opportunity, as well as the U.S. Air Force Global Positioning System Block IIR fleet. The AJ10 second stage engine produces approximately 10,000 lbs. of thrust for orbital insertion. There are currently four flights in the near-term manifest for Delta II, two in 2014 and two in 2016. Aerojet is a world-recognized aerospace and defense leader providing propulsion and energetics to the space, missile defense, strategic, tactical missile and armaments areas in support of domestic and international markets. GenCorp is a leading technology-based manufacturer of aerospace and defense products and systems with a real estate segment that includes activities related to the entitlement, sale, and leasing of the company's excess real estate assets. Additional information about Aerojet and GenCorp can be obtained by visiting the companies' websites at http://www.Aerojet.com and http://www.GenCorp.com. The Aerojet logo is available at http://www.globenewswire.com/newsroom/prs/?pkgid=12048 CONTACT: Glenn Mahone, Aerojet, 202.302.9941 [email protected] Kristin Conner, Aerojet, 916.355.2143 [email protected] Source: Aerojet News Provided by Acquire Media.

Copy Link

Recommended publications

Rocket Propulsion Fundamentals 2
https://ntrs.nasa.gov/search.jsp?R=20140002716 2019-08-29T14:36:45+00:00Z Liquid Propulsion Systems – Evolution & Advancements Launch Vehicle Propulsion & Systems LPTC Liquid Propulsion Technical Committee Rick Ballard Liquid Engine Systems Lead SLS Liquid Engines Office NASA / MSFC All rights reserved. No part of this publication may be reproduced, distributed, or transmitted, unless for course participation and to a paid course student, in any form or by any means, or stored in a database or retrieval system, without the prior written permission of AIAA and/or course instructor. Contact the American Institute of Aeronautics and Astronautics, Professional Development Program, Suite 500, 1801 Alexander Bell Drive, Reston, VA 20191-4344 Modules 1. Rocket Propulsion Fundamentals 2. LRE Applications 3. Liquid Propellants 4. Engine Power Cycles 5. Engine Components Module 1: Rocket Propulsion TOPICS Fundamentals • Thrust • Specific Impulse • Mixture Ratio • Isp vs. MR • Density vs. Isp • Propellant Mass vs. Volume Warning: Contents deal with math, • Area Ratio physics and thermodynamics. Be afraid…be very afraid… Terms A Area a Acceleration F Force (thrust) g Gravity constant (32.2 ft/sec2) I Impulse m Mass P Pressure Subscripts t Time a Ambient T Temperature c Chamber e Exit V Velocity o Initial state r Reaction ∆ Delta / Difference s Stagnation sp Specific ε Area Ratio t Throat or Total γ Ratio of specific heats Thrust (1/3) Rocket thrust can be explained using Newton’s 2nd and 3rd laws of motion. 2nd Law: a force applied to a body is equal to the mass of the body and its acceleration in the direction of the force.
[Show full text]
Materials for Liquid Propulsion Systems
https://ntrs.nasa.gov/search.jsp?R=20160008869 2019-08-29T17:47:59+00:00Z CHAPTER 12 Materials for Liquid Propulsion Systems John A. Halchak Consultant, Los Angeles, California James L. Cannon NASA Marshall Space Flight Center, Huntsville, Alabama Corey Brown Aerojet-Rocketdyne, West Palm Beach, Florida 12.1 Introduction Earth to orbit launch vehicles are propelled by rocket engines and motors, both liquid and solid. This chapter will discuss liquid engines. The heart of a launch vehicle is its engine. The remainder of the vehicle (with the notable exceptions of the payload and guidance system) is an aero structure to support the propellant tanks which provide the fuel and oxidizer to feed the engine or engines. The basic principle behind a rocket engine is straightforward. The engine is a means to convert potential thermochemical energy of one or more propellants into exhaust jet kinetic energy. Fuel and oxidizer are burned in a combustion chamber where they create hot gases under high pressure. These hot gases are allowed to expand through a nozzle. The molecules of hot gas are first constricted by the throat of the nozzle (de-Laval nozzle) which forces them to accelerate; then as the nozzle flares outwards, they expand and further accelerate. It is the mass of the combustion gases times their velocity, reacting against the walls of the combustion chamber and nozzle, which produce thrust according to Newton’s third law: for every action there is an equal and opposite reaction. [1] Solid rocket motors are cheaper to manufacture and offer good values for their cost.
[Show full text]
Design for Demise Analysis for Launch Vehicles
A first design for demise analysis for launch vehicles Henrik Simon, Stijn Lemmens Space debris: Inactive, manmade objects in space Source: ESA Overview Introduction Fundamentals Modelling approach Results and discussion Summary and outlook What is the motivation and task? INTRODUCTION Motivation . Mitigation: Prevention of creation and limitation of long-term presence . Guidelines: LEO removal within 25 years . LEO removal within 25 years after mission end . Casualty risk limit for re-entry: 1 in 10,000 Rising altitude Decay & re-entry above 2000 km Source: NASA Source: NASA Solution: Design for demise Source: ESA Scope of the thesis . Typical design of upper stages . General Risk assessment . Design for demise solutions to reduce the risk ? ? ? Risk A Risk B Risk C Source: CNES How do we assess the risk and simulate the re-entry? FUNDAMENTALS Fundamentals: Ground risk assessment Ah = + 2 Ai � ℎ = =1 � Source: NASA Source: NASA 3.5 m 5.0 m 2 2 ≈ ≈ Fundamentals: Re-entry simulation tools SCARAB: Spacecraft-oriented approach . CAD-like modelling . 6 DoF flight dynamics . Break-up / fragmentation computed How does a rocket upper stage look like? MODELLING Modelling approach . Research on typical design: . Elongated . Platform . Solid Rocket Motor . Lack of information: . Create common intersection . Deliberately stay top-level and only compare effects Modelling approach Modelling approach 12 Length [m] 9 7 5 3 2 150 300 500 700 800 1500 2200 Mass [kg] How much is the risk and how can we reduce it? SIMULATIONS Example of SCARAB re-entry simulation 6x Casualty risk of all reference cases Typical survivors Smaller Smaller fragments fragments Pressure tanks Pressure tanks Main tank Engine Main structure + tanks Design for Demise .
[Show full text]
Los Motores Aeroespaciales, A-Z
Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 < aeroteca.com > Depósito Legal B 9066-2016 Título: Los Motores Aeroespaciales A-Z. © Parte/Vers: 1/12 Página: 1 Autor: Ricardo Miguel Vidal Edición 2018-V12 = Rev. 01 Los Motores Aeroespaciales, A-Z (The Aerospace En- gines, A-Z) Versión 12 2018 por Ricardo Miguel Vidal * * * -MOTOR: Máquina que transforma en movimiento la energía que recibe. (sea química, eléctrica, vapor...) Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 Este facsímil es < aeroteca.com > Depósito Legal B 9066-2016 ORIGINAL si la Título: Los Motores Aeroespaciales A-Z. © página anterior tiene Parte/Vers: 1/12 Página: 2 el sello con tinta Autor: Ricardo Miguel Vidal VERDE Edición: 2018-V12 = Rev. 01 Presentación de la edición 2018-V12 (Incluye todas las anteriores versiones y sus Apéndices) La edición 2003 era una publicación en partes que se archiva en Binders por el propio lector (2,3,4 anillas, etc), anchos o estrechos y del color que desease durante el acopio parcial de la edición. Se entregaba por grupos de hojas impresas a una cara (edición 2003), a incluir en los Binders (archivadores). Cada hoja era sustituíble en el futuro si aparecía una nueva misma hoja ampliada o corregida. Este sistema de anillas admitia nuevas páginas con información adicional. Una hoja con adhesivos para portada y lomo identifi caba cada volumen provisional. Las tapas defi nitivas fueron metálicas, y se entregaraban con el 4 º volumen. O con la publicación completa desde el año 2005 en adelante. -Las Publicaciones -parcial y completa- están protegidas legalmente y mediante un sello de tinta especial color VERDE se identifi can los originales.
[Show full text]
The Delta Launch Vehicle- Past, Present, and Future
The Space Congress® Proceedings 1981 (18th) The Year of the Shuttle Apr 1st, 8:00 AM The Delta Launch Vehicle- Past, Present, and Future J. K. Ganoung Manager Spacecraft Integration, McDonnell Douglas Astronautics Co. H. Eaton Delta Launch Program, McDonnell Douglas Astronautics Co. Follow this and additional works at: https://commons.erau.edu/space-congress-proceedings Scholarly Commons Citation Ganoung, J. K. and Eaton, H., "The Delta Launch Vehicle- Past, Present, and Future" (1981). The Space Congress® Proceedings. 7. https://commons.erau.edu/space-congress-proceedings/proceedings-1981-18th/session-6/7 This Event is brought to you for free and open access by the Conferences at Scholarly Commons. It has been accepted for inclusion in The Space Congress® Proceedings by an authorized administrator of Scholarly Commons. For more information, please contact [email protected]. THE DELTA LAUNCH VEHICLE - PAST, PRESENT AND FUTURE J. K. Ganoung, Manager H. Eaton, Jr., Director Spacecraft Integration Delta Launch Program McDonnell Douglas Astronautics Co. McDonnell Douglas Astronautics Co. INTRODUCTION an "interim space launch vehicle." The THOR was to be modified for use as the first stage, the The Delta launch vehicle is a medium class Vanguard second stage propulsion system, was used expendable booster managed by the NASA Goddard as the Delta second stage and the Vanguard solid Space Flight Center and used by the U.S. rocket motor became Delta's third stage. Government, private industry and foreign coun Following the eighteen month development program tries to launch scientific, meteorological, and failure to launch its first payload into or applications and communications satellites.
[Show full text]
Preliminary Analysis of Hybrid Rockets for Launching Nanosats Into LEO
Fernando de Souza Costa and Ricardo Vieira Preliminary Analysis of Hybrid Fernando de Souza Costa Rockets for Launching Nanosats into [email protected] INPE LEO LCP 12630-000 Cachoeira Paulista, SP, Brazil This work determines the preliminary mass distribution of hybrid rockets using 98% H2O2 and solid paraffin mixed with aluminum as propellants. An iterative process is used to calculate the rocket performance characteristics and to determine the inert mass fraction Ricardo Vieira from given initial conditions. It is considered a mission to place a 20 kg payload into a 300 km circular equatorial orbit by air launched and ground launched hybrid rockets using [email protected] three stages. The results indicate total initial masses of about 7800 kg for a ground INPE launched hybrid rocket and 4700 kg for an air launched hybrid rocket. LCP Keywords: hybrid rocket, paraffin, H2O2, nanosats, low Earth orbit (LEO) 12630-000 Cachoeira Paulista, SP, Brazil The hydrogen peroxide (H2O2) is a well-known oxidizer and has Introduction been used for decades in rockets, gas generators, helicopter rotors and rocket belts (Davis Jr. and Keefe, 1956; Wernimont et al., 1Hybrid rocket technology is known for more than 50 years; 1999). It was used, for example, as an oxidizer in the British rocket however, only in the 1960’s its safety characteristics motivated a Black Knight. Heister et al. (1998) cite some advantages of using significant research. Nowadays, the need for green propellants hydrogen peroxide as oxidizer: high density, easy of handling, non- (propellants with low toxicity and low pollutant characteristics), the toxicity and mono-propellant characteristics.
[Show full text]
Delta II Data Sheet
Delta II Data Sheet http://www.spacelaunchreport.com/delta2.html Space Launch Report: Delta II Data Sheet Home On the Pad Space Logs Library Links Delta II Vehicle Configurations Vehicle Components Delta Launch History Delta 226, a Standard 7925-9.5 with a GPS Payload Boeing's Delta II, one of the world's most most successful expendable space launch vehicles, was an updated version of the Thor-Delta series that first flew for NASA in 1960. In the early 1980s, NASA halted procurement at Delta 183 after shifting all payloads to the Space Transportation System. To create Delta II for the U.S. Air Force Medium Launch Vehicle (MLV) program after the 1986 Challenger accident, McDonnell Douglas had to restart Delta production. The new rocket's first stage was stretched 3.66 meters and it's payload fairing was widened. The ultimate Delta II version, which did not appear until 1990, was boosted by more powerful solid rocket motors and a more powerful first stage motor. Delta 184, the first Delta II, launched GPS 14 on Valentine's Day, 1989. Boeing used a four-digit numbering system to identify specific Delta models. The first digit indicated the first stage and solid rocket motor (SRM) type. The first Delta II models, 16 altogether, were 6000-series birds with Extra Long Extended Tank (XLET) Thor first stages, with a Rocketdyne RS-27A main engine, and with Thiokol Castor 4A SRMs. Subsequent 7000-series Delta II vehicles used more powerful Alliant Graphite Epoxy SRMs (GEMs). Delta 2 7925-10C (Composite 10 ft.
[Show full text]
Materials for Liquid Propulsion Systems
CHAPTER 12 Materials for Liquid Propulsion Systems John A. Halchak Consultant, Los Angeles, California James L. Cannon NASA Marshall Space Flight Center, Huntsville, Alabama Corey Brown Aerojet-Rocketdyne, West Palm Beach, Florida 12.1 Introduction Earth to orbit launch vehicles are propelled by rocket engines and motors, both liquid and solid. This chapter will discuss liquid engines. The heart of a launch vehicle is its engine. The remainder of the vehicle (with the notable exceptions of the payload and guidance system) is an aero structure to support the propellant tanks which provide the fuel and oxidizer to feed the engine or engines. The basic principle behind a rocket engine is straightforward. The engine is a means to convert potential thermochemical energy of one or more propellants into exhaust jet kinetic energy. Fuel and oxidizer are burned in a combustion chamber where they create hot gases under high pressure. These hot gases are allowed to expand through a nozzle. The molecules of hot gas are first constricted by the throat of the nozzle (de-Laval nozzle) which forces them to accelerate; then as the nozzle flares outwards, they expand and further accelerate. It is the mass of the combustion gases times their velocity, reacting against the walls of the combustion chamber and nozzle, which produce thrust according to Newton’s third law: for every action there is an equal and opposite reaction. [1] Solid rocket motors are cheaper to manufacture and offer good values for their cost. Liquid propellant engines offer higher performance, that is, they deliver greater thrust per unit weight of propellant burned.
[Show full text]
Acquisition Story 54 Introduction 2 Who We Were 4 194Os 8 195Os 12
table of contents Introduction 2 Who We Were 4 194Os 8 195Os 12 196Os 18 197Os 26 198Os 30 199Os 34 2OOOs 38 2O1Os 42 Historical Timeline 46 Acquisition Story 54 Who We Are Now 58 Where We Are Going 64 Vision For The Future 68 1 For nearly a century, innovation and reliability have been the hallmarks of two giant U.S. aerospace icons – Aerojet and Rocketdyne. The companies’ propulsion systems have helped to strengthen national defense, launch astronauts into space, and propel unmanned spacecraft to explore the universe. ➢ Aerojet’s diverse rocket propulsion systems have powered military vehicles for decades – from rocket-assisted takeoff for propeller airplanes during World War II – through today’s powerful intercontinental ballistic missiles (ICBMs). The systems helped land men on the moon, and maneuvered spacecraft beyond our solar system. ➢ For years, Rocketdyne engines have played a major role in national defense, beginning with powering the United States’ first ICBM to sending modern military communication satellites into orbit. Rocketdyne’s technology also helped launch manned moon missions, propelled space shuttles, and provided the main power system for the International Space Station (ISS). ➢ In 2013, these two rocket propulsion manufacturers became Aerojet Rocketydne, blending expertise and vision to increase efficiency, lower costs, and better compete in the market. Now, as an industry titan, Aerojet Rocketdyne’s talented, passionate employees collaborate to create even greater innovations that protect America and launch its celestial future. 2011 A Standard Missile-3 (SM-3) interceptor is being developed as part of the U.S. Missile Defense Agency’s sea-based Aegis Ballistic Missile Defense System.
[Show full text]
In-Space Propulsion Data Sheets
In-Space Propulsion Data Sheets Updated: 4/8/20 Package cleared for public release Monopropellant Propulsion > 17,000 flight monopropellant thrusters delivered MR-103 0.2 lbf REA MR-111 1.0 lbf REA MR-106 5.0 lbf REA MR-107 60 lbf REA MR-104 100 lbf REA Aerojet Rocketdyne produces monopropellant rocket engines MR-80 700 with thrust ranges from 0.02 lbf to 600 lbf lbf REA 11411 139th Place NE • Redmond, WA 98052 (425) 885-5000 FAX (425) 882-5747 MR-401 0.09 N (0.02 lbf) Rocket Engine Assembly 232.727 mm 9.16” 55.800 mm 2.20” Design Characteristics Performance • Propellant…………………………………………… Hydrazine • Specific Impulse, steady state……. 180 - 184 sec (lbf-sec/lbm) • Catalyst…………………………………………………... S-405 • Specific Impulse, cumulative……...1 50 - 177 sec (lbf-sec/lbm) • Thrust/Steady State………..0.07 – 0.09 N (0.016 - 0.020 lbf) • Total Impulse…………………. 199,693 N-sec (44,893 lbf-sec) • Feed Pressure………………14.8 – 18.6 bar (215 - 270 psia) • Total Starts/Pulses………………………………………… ..5,960 • Flow Rate……… 154.2 – 181.4 g/hr (0.34 – 0.40 lbm/hr) • Min Impulse Bit…………. 4.0 N-sec @ 14.8 bar & 60 sec ON • Valve………………………………………………… Dual Seat ………………………… (0.9 lbf-sec @ 215 psia & 60 sec ON) • Valve Power…………….. 8.25 Watts Max @ 28 Vdc & 21°C • Steady State Firing................... 0 - 900 sec Single Firing • Valve Heater Power……. 1.9 Watts Max @ 28 Vdc & 21°C ………………………………. 720 hrs Cumulative • Cat. Bed Heater Pwr…… 1.8 Watts Max @ 28 Vdc & 21°C Status • Mass………………………………………. 0.60 kg (1.32 lbm) • Flight Proven • Engine……………………………… 0.33 kg (0.74 lbm) • Currently in Production • Valve………………………………… 0.20 kg (0.44 lbm) Reference • Heaters…………………………… 0.065 kg (0.14 lbm) • JANNAF, 2011, paper 2225 11411 139th Place NE • Redmond, WA 98052 (425) 885-5000 FAX (425) 882-5747 MR-103G 1N (0.2 lbf) Rocket Engine Assembly Design Characteristics Performance • Propellant…………………………………………… Hydrazine • Specific Impulse…………………….
[Show full text]
Thermo-Structural Analysis of a Rocket Engine Thrust Chamber
Thermo-Structural Analysis of a Rocket Engine Thrust Chamber Chethan Madhu Suryavanshi SUPERVISED BY Dr. Jose Ignacio Rojas Gregorio Dr. Luca d’ Agostino Universitat Politècnica de Catalunya & University of Pisa Master in Aerospace Science & Technology December 2018 This Page Intentionally Left Blank Thermo-Structural Analysis of a Rocket Engine Thrust Chamber BY Chethan Madhu Suryavanshi DIPLOMA THESIS FOR DEGREE Master in Aerospace Science and Technology AT Universitat Politècnica de Catalunya & University of Pisa SUPERVISED BY: Dr. Jose Ignacio Rojas Gregorio Dr. Luca d’ Agostino Department of Aerospace Science and Engineering MASTER THESIS Dedicated to my family and my inspiration « Dr B.R Ambedkar » Thermo-structural analysis of a rocket engine thrust chamber i ABSTRACT The rocket engine market today presents several new trends that will substantially change the current technological scenario. Apart from the imminent applications to the mega constellations and the advancement of electric propulsion, some aspects such as environmental protection require a conceptual redefinition of rocket propulsion systems with chemical propellants. One of the best technological options to contribute to the protection of the environment and personnel is to use "green" propellants to replace current toxic and / or ecologically harmful propellants. Thermal and mechanical loads represent the most stringent operating limits for liquid propellant rocket combustion devices (chamber, injectors, expansion nozzle). This report describes the two-dimensional model developed for the evaluation of the temperature distribution across the wall of the thrust chamber and the extension of a typical rocket motor. In the model the thrust chamber and the nozzle extension are divided into several stations using ANSYS APDL 16.0 and are subjected to a steady state and a transient analysis to study the characteristics of heat transfer and to understand the thermal response and structural of the model.
[Show full text]
Appendix a Example Engine Cycle Schemes
Appendix A Example Engine Cycle Schemes In this appendix some example engine cycles are given to give the user an idea of the possible engine architectures and varieties that are supported in LiRA. Figures A-1 to A-6 show a pressure fed cycle, a gas generator cycle, two staged combustion cycles, a closed expander cycle and a bleed expander cycle. Two staged combustion cycles are shown to show the difference in engine architecture when the user chooses for the fuel rich or for the oxygen rich pre-burner; when a fuel rich pre-burner is chosen the assumption is made that most of the fuel remains unburned after passing the pre-burner and the oxidiser content is so little that the gas flow after passing the turbine can be considered a pure fuel flow and thus only oxidiser needs to be added in the main combustion chamber. For oxygen rich pre-burners the same is true except now the flow behind the turbine is assumed to be so rich in oxygen that the fuel content is negligible and only fuel in the main combustion chamber must be added. Further the example cycles also show the variety of using a single or double turbine; note that only parallel double turbines are supported not series. Some examples have regenerative cooling of both combustion chamber and nozzle, while others have only regenerative cooling of the main combustion chamber or no regenerative cooling at all. Currently LiRA does not allow for nozzle cooling without chamber cooling and no dump cooling neither. Master of Science Thesis R.R.L.
[Show full text]