PRODUCTS

P.O. Box 5821 • Portland, OR 97228

503-234-4545 • Fax 503-234-4422 2010 Toll Free 1-800-426-5858 www.COASTportland.com Rev. 2 04/10 2010 PRODUCTS

Table of Contents

PRODUCTS Technology...... 4-15 LIGHTS ■ General Use ...... 18-25 ■ Professional Use ...... 26-33 ■ Tactical Use...... 34-37 ■ Camping/Emergency Use ...... 38-41 ■ Headlamps ...... 42-47 ■ High Performance ...... 48-59 ■ Gear ...... 60-65 KNIVES ■ General Use ...... 68-73 ■ Hunting ...... 74-79 ■ Professional Use ...... 80-85 ■ Tactical Use...... 86-91 ■ Outdoor Use ...... 92-97 ■ Fishing ...... 98-101 ■ Gear ...... 102-105 MULTI-TOOLS ■ Professional Use ...... 108-111

■ Tactical Use ...... 112-113 ■ Outdoor Use ...... 114-117 ■ Fishing ...... 118-121 TECHNICAL SPECIFICATIONS Lights ...... 122-125 Knives...... 126-130 Multi-Tools ...... 131

2 3 PRODUCTS LED TECHNOLOGY

How LEDs Outshine Stan- LEDs Provide Vastly Improved Illumination and The Highest Quality LEDs Provide the dard Incandescent Flash- Energy Efficiency Highest Quality Illumination lights: COAST LED Lenser lights use only the highest quality Nichia™, Incandescent Illumination vs. LumiLED™, and Cree® LEDs. • Performance. LEDs can last 50 to 100 COAST LED Lenser Illumination times longer than the typical incan- LEDs are manufactured on silicon wafers in semiconductor descent bulb and can save up to 80 Incandescent Light percent of the energy required to light cleanrooms. Due to the nature of the manufacturing incandescent arrays. process, the LEDs made from the center of the wafer are much higher quality and thus provide much brighter light. • Durability. Because they are solid- Incandescent state, LEDs hold up well to jarring Light and bumping as they lack the fragile Only LEDs from the high quality center of the wafer go filament and tubing that increases the into COAST LED Lenser lights. COAST LED Lenser odds of breaking. They are resistant to heat, cold, and shock as well.

• Environmentally friendly. Unlike CFLs, no mercury is used in the manufactur- COAST ing of LEDs and the long-life of the bulb LED Lenser means that fewer resources are used over time in maintenance and replace- ment.

• Energy-efficiency. With proper thermal managment LEDs burn very efficiently. Incandescent bulbs, on the other hand, Incandescent vs. COAST LED Lenser Energy Use emit a staggering 98 percent of their energy as heat. More Than • Cost-effectiveness. Since incandescent bulbs lose so much energy as heat, the 200 savings in battery life alone will pay for Hours of Service the initial cost of any LED light. 5 4 3 The Battery Debate 2 At COAST, standard battery sizes – AAA, AA, C and D – are the norm for most of 1 the flashlights we carry in order to make battery replacement as easy and cost effective as possible. COAST flashlights last, on average, 2 to 3 times longer than most of the competition’s on a single set of batteries, and – when the time does come to change batteries – the cost of doing so is markedly less than the rest when purchasing standard Incandescent COAST LED Lenser 1 2 3 4 5 sized batteries than specialized ver- batteries | bulbs batteries | LED ENTRY LEVEL STANDARD GOOD BETTER BEST sions. 80 17 8 1 QUALITY LED QUALITY LED QUALITY LED QUALITY LED QUALITY LED

64 75 PRODUCTS OPTICAL TECHNOLOGY STANDARD LED COAST LED LENSER OPTICAL TECHNOLOGY Advanced Lens and Reflector Systems Crystal Reflector Cloverleaf Reflector Cloverleaf Multi- Prism Reflector Advanced Focus Multi-Optic Tube System System Reflector System System System™ COAST advanced lens and reflector systems provide a brighter, more focused beam than standard LED lights. The newest optical system, the Advanced Focus System™, offers the convenience of moving from a spot to flood beam without the dark “holes” or “rings” commonly seen at the transition point of competitive adjustable-beam lights. Further detail on the new system can be found on the following pages.

• Unfocused beam Lined with highly reflective Italian A broad spectrum beam for A diffused beam that A highly concentrated beam A spot to flood focusing beam A multi-optic focusable lens designed to • Standard contacts crystal, it intensifies light output and general illumination. casts a broad shaft of that casts light over that captures all usable light. make the most of high intensity LEDs and • Plastic casing provides a much brighter beam than light for up close work. a maximum distance provide smooth spot to flood transition. • Standard-quality LED comparable LED lights.

Up to 82ft. Up to 92ft. Up to 190ft. Up to 764ft. Up to 1540ft. Up to 2034ft.

Cutting-edge Lens Systems Mean Brilliant Light Output The output of COAST LED Lenser lights is measured in lumens.

WHY LUMENS? Given the wide range in quality of light sources and optics that are used, an easily identifiable, standard unit measurement is especially important with flashlights and headlamps. COAST LED Lenser measures light output in Lumens because it has been generally adopted by the portable lighting industry as the most universal measurement of light output and accurately demonstrates how COAST LED Lenser has the most efficient optics of any company in the industry, producing brighter lights. This advantage, combined with COAST LED Lenser’s superior LEDs, produces the brightest and most efficient LED lights on the market today.

6 7 PRODUCTS OPTICAL TECHNOLOGY

Advanced Focus System™ A Revolution in Lighting Advanced Focus System™

The LED Lenser Advanced Focus System™ provides seamless transition between the nar- The patent-pending Advanced Focus row and broad beams. Unlike competitor’s products, which often have dark circles or light System™ combines a precision lens and drop-out during the transition from “spot” to “flood” settings, LED Lenser focusing beam a dynamic reflector to bring LED focusing handheld lights provide bright, clear light at all stages of illumination. technology to consumers at price points accessible to anyone. Early focusing beam systems created black spots or rings, hampering the field of view. The Ad- vanced Focus System™ provides a seam- less transition from a broad flood beam to a focused spot beam - no black spots, no dark rings, just bright, clear light at all Spot Beam stages of illumination. The Advanced Focus System™ spot beam provides a We offer two ways to access the sharply focused beam of light that illuminates Advanced Focus System™: more distant areas. One-Handed Speed-Focus™, found in many High Performance models, enables Flood Beam the user to change from “spot” to “flood” The Advanced Focus System™ with a simple push forward or pull back flood beam provides a broad on the head of the light. circular beam of light that illumi- Twist Focus lights move from spot to flood nates larger, close-up areas and eliminates dark spots in the center by merely twisting left or right on the like traditional focusing head of the light. flashlights.

One-handed focusing; just slide foward or back Twist to focus light from spot to flood One-Handed Speed-Focus™ Many of COAST’s High Performance lights feature a one-handed system for moving from a broad flood beam to a focused spot beam. A simple push forward or pull back on the head of the light adjusts the beam to suit the application. Twist Focus Twist Focus lights can easily transition from spot to flood with a simple twist to the left or right on the head of the light.

8 9 PRODUCTS DIGITAL TECHNOLOGY

Continually advancing technology of- ferings, COAST LED Lenser is featuring Quick-Cycle Switch System™ Micro Controller Switch System two feature sets with the versatility and function customers require—the Quick- With this feature, “high” output is the standard setting with each The LED Lenser Microcontroller Switch System uses a microproces- The 5 LED Lenser Microcontroller Switch System Settings are: cycle Switch System™ and Micro- light, meaning approximately 75% output is the norm, preserving battery sor to allow users full control of the illumination settings of their controller Switch System—available life. Users can always access the light’s “maximum” brightness by light. Using a single switch, the user has the ability to activate the • Maximum Light Output: projects the maximum amount of light on select models. The Quick-cycle applying momentary pressure to the main switch - simply press and hold light at the maximum brightness—ideal for security and tacti- produced by the LED. Switch System™ enables users to cycle it. To activate the low-output setting from the OFF position, fully cal use—as well as taking advantage of the four other settings. depress and release the switch two times. Low output is useful for An additional custom setting (a % of output of their choice) is • Signal: produces a slow blinking light that can be used as a between available light output levels, signal for tactical or emergency situations. reading, report writing, identification and personal inspections and also available for the user to decide upon and pre-set. Finally, meaning the user chooses the level of maximizes battery run-time. the light’s three other preset options—signal, strobe and SOS light needed for their task and decides • Strobe: creates very quick flashes of light that can be used to dis- settings—round out the total of five settings and multiply uses for orient an attacker or as a non-lethal weapon for law-enforcement. how to use the battery life of their light the consumer. most efficiently. The Microcontroller • SOS: projects the international Morse Code distress signal, three Switch System uses an on-board mi- fast flashes-three long flashes-three fast flashes in sequence. croprocessor to differentiate between • Variable Light Output: this mode enables the user to adjust five different flows of light output, from the light output to suit the task. The light can be adjusted from “maximum” to “strobing” light. a 1%-100% setting to illuminate close-up areas and conserve batteries, while the higher setting illuminates areas that are farther away.

Press at any time for maximum output.

10 11 PRODUCTS MANUFACTURING TECHNOLOGY

COAST LED Lenser lights are precision Reflector and engineered to use the most advanced components and highest quality LEDs lens system One-Handed to produce the highest quality devices Modular Construction System Enhances on the market. Combining the High Speed Focus™ Performance LEDs with the most ad- Performance and Reliability vanced optical and digital technologies along with quality materials — includ- ing metal casings and 24-karat gold contacts – produces the best portable lights at price points consumers ap- preciate.

Each product is tested for luminous flux – the clearest and most precise Gold plated LED Thermal Management measurement of the amount of light High intensity LED with emitted from any light source – which contacts heat sink cooling Even though LEDs are highly energy efficient, it’s is measured in lumens. In addition, Corrosion vital that the heat they do produce is managed many COAST LED Lenser lights feature correctly to extend the life of the LED. The high resistant intensity LEDs employed in LED Lenser products our Modular Construction System that threads Water resistant incorporates the power switch into the utilize special heat sinks to manage the heat flow and thereby get the most light from every LED in battery pack, further increasing the high-grade durable construction of the light. aluminum casing COAST products.

Portability. Durability. Performance. Dual function battery pack COAST LED Lenser employs advanced and switch proprietary technologies to produce Water resistant end cap more brilliant illumination from a smaller flashlight, making them more portable and convenient to use for a wider variety of applications.

Patented and patent-pending lens and reflector systems enable COAST to create pocket-sized lights that produce twice as much — often more — light 115 Model 7438 than much larger LED lights. And, Length: 5 in. because they use smaller and non- Weight: 5.6 oz. proprietary batteries, these smaller 3 AAA Batteries lights are more economical and less of a headache to operate as well. Advanced Technology and Construction Enables COAST LED Lenser to Produce More Light from a Smaller, More Powerful Handheld Light

12 13 PRODUCTS KNIFE /TOOL TECHNOLOGY

Since 1919, COAST has been making Gets the Job Done products that get the job done. First, it was working knives for the rugged log- Materials gers of the Pacific Northwest. Then it was Blade Sharpness COAST knives & tools use only the finest quality 440C specially treated cutlery steel from Seki, specialty knives for the men who fished Japan. An excellent steel for performance and durability, 440C is a high-chromium stain- The sharpness of a blade is determined by the quality of the steel and the precision of the the great Pacific Ocean. less steel with a terrific balance between hardness and corrosion resistance. COAST steel is blade grinding. After passing the Rockwell test, COAST knives are tested for sharpness on a produced in small quantities exclusively for the production of knife blades. In addition, COAST machine designed by COAST engineers. This Blade Sharpness Tester measures the amount of Today, it’s a full range of knives and multi- uses solid brass or nickel silver bolsters and linings as well as genuine stag, wood, Zytel®, a pressure required to cut a piece of acrylic tape as it is lowered onto a knife blade. If a blade tools for people across the globe who Kraton™ rubber, and ABS handles. The natural handle materials such as bone, stag, and wood doesn’t meet the minimum threshold requirements, they are not sold as COAST products. have their own jobs to get done. COAST’s are hand-cut and cured before they are ready to be made into a COAST product. history of making hardworking knives continues today under the leadership of Technology Symbol of Quality founder Henry Brands’ grandson, David COAST uses time-tested procedures augmented C. Brands, the third generation owner of COAST has been producing quality cutlery for over 85 years under the leadership of three by the latest technology throughout the knife COAST Products. COAST offers consumers generations of the Brands family. Each knife and tool is individually quality tested for both and tool production process. COAST blades are sharpness and hardness of the blade. The Tested seal and Three Generations of Quality logo a broad range of quality products that pro- formed from either coils of steel or steel plates are COAST guarantees that customers are getting a knife or tool that will Get the Job Done. vide the performance needed for a price and initial shaping is completed with laser that’s warranted. cutting and fine blanking machinery. Next, a Computer Numerically Controlled (CNC) ma- COAST has expanded and refined its chine grinds the blade to a specified thickness, product offerings for 2010; to make it depending on the model. Each blade is then David C. Brands—Owner, COAST Products even easier to find the tool needed to get heated, cooled and honed to COAST specifica- the job done, we’ve organized products tions – ultimately becoming suitable for a lifetime of service. Nearly finished, the blade into convenient “use” categories. Browse goes through a final grinding process utilizing products by how they would be used – the CNC machine where the final blade shape is ground and any additional blade features, Premium quality blade steel, whether that be “professional,” “tactical” such as serrations and gut hooks, are produced. Lastly, the knife is assembled and receives a individually tested for sharpness or “outdoor,” etc. – and see what’s avail- final polishing and sharpening. able to help get the job done. and hardness

All COAST products carry the COAST Life- Testing Sturdy riveted time Guarantee first instituted by COAST’s Blade Hardness – COAST’s commitment to the customer or threaded founder Henry W. Brands. construction COAST tests every blade sold to ensure the optimum hardness for customer use. The hard- ness of a blade is determined by the type of steel used as well as the type of heat treatments it receives in forging. To measure the hardness of a blade, a diamond is pressed into the steel with a determined load. The depth of penetration is measured in Rockwell C— or abbreviated as HRC Thumb studs for or RC. If the blade is comprised of steel which is one-handed opening too soft, the blade will not retain an edge over time. If the blade is made of steel which is too hard, it can be brittle and break under even nor- mal use conditions. COAST has determined the Quality construction ensures optimal HRC at 57-59, a smaller subset of the smooth blade operation recommended range. This HRC ensures the blade will retain its edge while being extremely strong and durable. Any blade that does not meet Safety lock these conditions is scrapped and does not move into final production phase. Quality handle systems construction

14 15 GENERAL USE

PROFESSIONAL USE

TACTICAL USE

CAMPING / EMERGENCY

HEADLAMPS

HIGH PERFORMANCE

GEAR

16 17 GENERAL USE LIGHTS

General Use. The following lights, meant for general household and task use, repre- sent the best that COAST has to offer: quality, efficiency, and value. The combination of

COAST’s exclusive Cloverleaf Reflector and Crystal Reflector Tube Systems, along with GENERAL USE the highest quality LEDs on the market, produces the brightest, most energy-efficient flashlights available today. General Use lights include everything from keychain-sized lights to full-sized C-cell powered lights with multiple LEDs – a light for every task busy families require to stay productive and safe.

1189 V2 9 CHIP DUAL COLOR FLASHLIGHT

98ft 59 100 2 x C 8.75

• Cloverleaf Multi-Reflector System • 9 high-intensity LEDs; 8 white, 1 red • Aluminum casing • Front dual switch

18 19 GENERAL USE LIGHTS GENERAL USE

1006 1106 V2 6 CHIP FLASHLIGHT V2 6 CHIP DUAL COLOR FLASHLIGHT

105ft 80 20 3 x AAA 6.2 85ft 70 20 3 x AAA 6.2

• Cloverleaf Multi-Reflector System • Cloverleaf Multi-Reflector System • 6 high intensity LEDs; white beam • 6 high intensity LEDs; 5 white, • Aluminum casing 1 red (red preserves night vision) • Front switch • Aluminum casing • Front dual switch

20 21 GENERAL USE LIGHTS

7839 NANO TAC TORCH 7547BL (Black casing)

V2 TRIPLEX GENERAL USE 12 1 4 x AG5 2.5

59ft 30 16 2 x AA 6.0 • Crystal Reflector Tube System • High intensity LED; white beam • Cloverleaf Reflector System • Lightweight tactical aluminum casing • 3 high intensity LEDs; white beam • Rear on/off switch • Lightweight aluminium casing • Rear on/off switch

NEW! 7553BL V8 STANDARD TORCH Also available in a silver

casing as model 7547 12 9 3 x AG13 2.2

7550 7817 V8 STANDARD TORCH, RED BEAM INSPECTION LIGHT

1.5 7 2 x AG13 2.2 9 24 2 x AAA 5.5

• Crystal Reflector Tube System • Crystal Reflector Tube System • High quality LED; white beam • High intensity LED; white beam • Front switch • Metal casing • Metal casing • Rear on/off switch

22 23 GENERAL USE LIGHTS 7582BL SMALL FLEX LIGHT 7831 MINI TAC 13 4 4 x AG13 6 GENERAL USE

20 6 1 x AAA 3.5 • Crystal Reflector Tube System • High intensity LED: white beam • Crystal Reflector Tube System • Metal Casing • High intensity LED; white beam • Front Switch • Lightweight tactical aluminum casing • Rear on/off switch

7583BL MEDIUM FLEX LIGHT

13 6 1 x AAA 10.9

• Crystal Reflector Tube System • High intensity LED: white beam • Metal Casing 7578BL • Front Switch MICRO FLEX LIGHT

6 1.3 4 x AG5 5

7830 • Crystal Reflector Tube System MINI TAC • High intensity LED: white beam • Metal Casing • Front Switch 20 6 1 x AAA 3.5

• Crystal Reflector Tube System • High intensity LED; white beam • Lightweight tactical aluminum casing • Rear on/off switch 75331 CLIP LIGHT

10 3 1 x AAA 4.1

• Crystal Reflector Tube System • High intensity LED; white beam • Lightweight tactical aluminum casing • Rear on/off switch • Alligator Clip

24 25 PROFESSIONAL USE

Professional Use. COAST gained success providing hard workers with products that went to work with them, and that’s still where the focus is placed. The Professional Use series features COAST’s most advanced op- tical and digital technology, combined with the highest wattage LEDs to create lights that meet the highest professional standards—COAST cus- tomers. Specially designed for heavy and continuous use, these lights will stand up to whatever abuse the job puts them through. With stain- less steel and aluminum, they clean easily, fit in a pocket or clip to a 7853 belt and feature COAST’s best technology (including the Prism Reflector DIGITAC RECHARGEABLE FOCUS BEAM System, and the Cloverleaf Reflector System—all described in detail on

1 x pages 6-7) so that customers can rely on COAST products to help Get the 590ft 127 2 ICR14500 4.7 LI-ION

Job Done. PROFESSIONAL USE

• Twist for narrow or broader beam; no dark spots when moving from concentrated to wide beam • Advanced Focus System™ • High intensity LED; white beam • Charges off AC or DC power • Aluminum casing • Rear on/off switch

Lithium Ion Rechargeable Batteries

Like so many of the electronics people rely on daily, the flashlight is going rechargeable. The DigiTac Rechargeable features a high quality lith- ium ion battery, similar to many digital cameras. The lithium ion battery provides one of the best energy-to-weight ratios available — important in a compact light like the DigiTac. In addition, lithium ion has solved the problem of the “memory effect” that causes other rechargeable batteries to hold less than optimal charge. Lithium ion bat- teries hold their charge extremely well, even when not in use, and recharge quickly.

26 27 PROFESSIONAL USE 7575 The LED Lenser AUTO LED Advanced Focus System™ 13 .5 4 x 20H 1.9 NI-MH Standard incandescent flashlights provide a flood beam to light a broad, close-in area. Newer flash- • “Moon” lens produces circular beam lights provide the ability to focus the beam from • High intensity LED; white beam broad to spot to highlight objects further away • Charges in vehicle’s cigarette lighter • Blue light shows charge status with clarity. Yet, historically focusing beam flash- • Metal casing lights have black spots or dark rings—halos—that • Twist on/off switch appear during the transition from a broad flood beam to a focused spot beam, making it much harder to actually see what’s being illuminated. This is the case with so many lights that consum- ers have become accustomed to the dark spots and halos and that’s why LED Lenser’s Advanced Focus System™ is so revolutionary. COAST’s unique lens and reflector system provides transi- PROFESSIONAL USE tions from “broad” to “focused” with no rings, 7300 LASER POINTER spots, or drop out areas. The beam is clear, bright and consistent through all phases of the transi- N/A 4 3 x AG5 2.3 tion from flood to spot – every time, all the time.

• High intensity LED; red laser • Metal casing • Front switch

7438 TACTICAL FOCUS BEAM

722ft 115 52 3 x AAA 5

• Twist for narrow or broader beam; no dark spots when moving from concentrated to wide beam • Advanced Focus System™ 7732DUV The Advanced Focus System™ flood beam provides • High intensity LED; white beam V2 6 CHIP DUAL COLOR ULTRAVIOLET LIGHT a broad circular beam of light that illuminates • Aluminum casing larger, close-up areas and eliminates dark spots in • Rear on/off switch the center. 114ft 70 52 3 x AAA 3.4

• Cloverleaf Multi-Reflector System • High intensity LEDs; 3 white, 3 ultraviolet • Aluminum casing • Front dual switch

The Advanced Focus System™ spot beam provides a sharply focused beam of light that illuminates more distant areas.

28 29 PROFESSIONAL USE NEW! 8606 Twist to focus light from spot to flood L6 FOCUS BEAM

656ft 105 8 2 x AA 6.3

• Twist for spot or flood beam • Advanced Focus System™ • High intensity LED; white beam • Weatherproof, corrosion resistant polymer casing • Rear twist switch

NEW! 8607 L7 FOCUS BEAM PROFESSIONAL USE

738ft 115 42 3 x AAA 5.5

• Twist for spot or flood beam • Advanced Focus System™ • High intensity LED; white beam • Weatherproof, corrosion resistant polymer casing • Rear power switch NEW! 8604 L4 FOCUS BEAM

295ft 25 26 3 x AAA 5.5

• Twist for spot or flood beam • Advanced Focus System™ • High intensity LED; white beam • Weatherproof, corrosion resistant polymer casing • Rear power switch

30 31 PROFESSIONAL USE Dive Torches 7730 V6 STAINLESS STEEL POWER CHIP For divers, crystal clear water is ideal… and hardly ever the case. To allow divers, whether for work or pleasure, to get the most from their experiences, they need to see and experience the underwater world surrounding them. 590ft 110 37 3 x AAA 4.1 The D14 Waterproof Flashlight has been tested to be waterproof up to 197 ft. (60 m.) Users get the benefits of clear, brilliant white LED light along • Prism Reflector System with the energy efficiency—20 hours on a single set of batteries—for which • High intensity LED; white beam COAST LED Lenser is well known. • Stainless steel casing • Front switch 7456 D14 WATERPROOF FLASHLIGHT

590ft 150 20 4 x AA 6.2

• One-handed front switch • Prism Reflector System PROFESSIONAL USE • High intensity LED; white beam • Neon color makes torch easy to see in marine conditions • Watertight; 197 feet/60 meters depth rating • Stainless steel and plastic casing • Lanyard included

7732 V6 STAINLESS STEEL 6 CHIP

170ft 135 48 3 x AAA 3.6

• Cloverleaf Multi-Reflector System • 6 high intensity LEDs; white beam • Stainless steel casing • Front switch

32 33 TACTICAL USE

7736TS POWER CHIP TACTICAL LIGHT

721ft 115 52 3 x AAA 5

• Prism Reflector System • High intensity LED; white beam • Lightweight tactical aluminum casing • Rear on/off switch TACTICAL USE

Tactical Use. COAST continues a long tradition of providing specific prod- ucts for hard working customers by developing a line of lights that combine the most advanced optical and digital technology with rugged styling and the technical features necessary for law enforcement, military, and extreme outdoor use. In situations where an intense light is needed for non-lethal Optional Universal/Picatinny Rail Mount available on page 65 disarming, or to temporarily disorient a suspect, these tactical lights can make a difference in avoiding lethal situations. COAST tactical lights fea- ture compact designs, lightweight aluminum casings, are virtually inde- structible and many include rear switches with momentary and permanent on/off capabilities highly desired by law enforcement and military users.

With optional Pressure Switch, the 7736TS makes the ideal weapon mounted light.

34 35 TACTICAL USE

77364 7736D 4 COLOR SIGNAL LIGHT V2 6 CHIP DUAL COLOR TACTICAL TORCH RED WHITE 114ft 3.8 70 3 x AAA 4 137ft 120 44 3 x AAA 3.7

BLUE RED

114ft 1.2 360 3 x AAA 4 28ft 5 74 3 x AAA 3.7

GREEN • Cloverleaf Multi-Reflector System • 6 high intensity LEDs; 5 white, 1 red 114ft 7.5 315 3 x AAA 4 • Lightweight tactical aluminum casing • Front dual switch

WHITE

114ft 70 52 3 x AAA 4 TACTICAL USE

• Cloverleaf Multi-Reflector System • 6 high intensity LEDs; 3 white, 1 blue, 1 red, 1 green • Lightweight tactical aluminum casing • Front quad switch

7345S V2 6 CHIP TACTICAL

105ft 80 20 3 x AAA 4.5

• Cloverleaf Multi-Reflector System 7736 • 6 high intensity LEDs; white beam V2 TACTICAL POWER CHIP TORCH • Lightweight tactical aluminum casing • Rear on/off switch

590ft 110 37 3 x AAA 4.5

• Prism Reflector System • High intensity LED; white beam • Lightweight tactical aluminum casing • Rear on/off switch

36 37 CAMPING / EMERGENCY

7533/2

CAMP LIGHT LIGHTS

12 24 2 x AA 5.5

• Dual function—use as flashlight or area light

• Crystal Reflector Tube System CAMPING/EMERGENCY with Refractor Rod • High intensity LED; white beam • Metal casing • Front switch

Solid White

NEW! Emergency Use. When emergencies strike, the only light necessary 7044 EMERGENCY STRETCH LIGHT Solid Red is reliable, provides a lot of light, lasts a long time and keeps fam-

ily safe. COAST emergency use lights were designed to meet those 15 40 4 x AAA 4.5 needs—compact, lightweight, and easy to pack; they are great to keep in arm’s reach at home or in the vehicle. Their varying options • Closed, use as a handheld flashlight • Open, use as an area light can provide further peace of mind in emergencies with options to • High quality LED; 4 white, 2 red signal for help (S.O.S.), provide non-lethal protection (strobe), and • Push button on/off • Includes lanyard their battery life is incomparable among others in the category, • Weatherproof, corrosion resistant rubber Flashing Red meaning batteries can be conserved better in emergencies. and polymer casing

38 39 CAMPING / EMERGENCY NEW! NEW! CE7124HGB 7040 EMERGENCY AREA LIGHT PERSONAL EMERGENCY AREA LIGHT

125 100 4xD 8.25 17 30 4 x AA 5.75

• 5 high quality LEDs; 1 white, 4 red • 8 high quality LEDs • Push button on/off with VLT Variable • Push button switch

Light Technology—choose any light LIGHTS • Protective cage shields plastic globe level • Durable casing • Durable casing • Built-in battery life indicator CAMPING/EMERGENCY

Flashing Red Solid Red Area Light Energy Saving

NEW! 7050 4-C EMERGENCY AREA LIGHT

60 50 4 x C 7.5

• 24 high quality LEDs • Push button on/off • Protective cage shields plastic globe • Durable casing • Built-in hanger

Flashing Red Solid Red Full White Energy Saving Flashing Red Solid Red Area Light Energy Saving

40 41 HEADLAMPS

Headlamps. COAST knows that providing the ability to illuminate an NEW! area hands-free enables customers to do more, and headlamps are 7499 the easiest way to accomplish tasks where both hands are necessary. H14 HEADLAMP The selection of specialty headlamps is designed to stand up to out- 689ft 200 2.5 4 x AA door use with water-resistant, rugged styling and comfortable, adjust- able bands. However, headlamps prove useful just about anywhere an extra set of hands would be nice — from cycling and backpacking • Advanced focus System • One-Handed Speed-Focus™ to spelunking and climbing, from connecting TV or computer cables • Micro Controller Switch System • On/off switch on battery pack to putting up Christmas lights and rediscovering lost toys behind the • Light and battery can be removed from head strap for couch – there’s always a good task for a headlamp. helmet attachment • Variable Light Output Technology controls brightness HEADLAMPS

Variable Light Output

Maximum Light Output

Signal

Strobe

SOS

Hinged to position beam

42 43 HEADLAMPS 7497 H7 FOCUSING HEADLAMP with VLT

590ft 170 15 3 x AAA

7495 H5 FOCUSING HEADLAMP • Advanced Focus System™ • Variable Light Output Technology (dimming function) controls light output 246ft 26 11 3 x AAA • High intensity LED; white beam • Metal & plastic casing, adjustable elastic straps • Hinged attachment to position beam • Advanced Focus System™ • Front switch • High intensity LED; white beam • Metal & plastic casing, adjustable elastic straps • Hinged attachment to position beam • Front switch HEADLAMPS

Hinged Attachment Lets You Position Beam Where You Need It

Stageless transition from flood to spot. 7498 H7R RECHARGEABLE FOCUSING HEADLAMP with VLT

590ft 170 3.5 3 x AAA NI-MH Rechargable

NEW! • Advanced Focus System™ 7494 • Variable Light Output Technology (dimming function) controls light output H4 3X5 MM LED HEADLAMP • High intensity LED; white beam • Includes rechargeable battery and charger unit • Metal & plastic casing, adjustable elastic straps 59ft 30 15 3 x AAA • Hinged attachment to position beam • Front switch Includes swivel clip • Three white LEDs • Front on/off switch • Can be used as a flashlight with included plastic carrying case • Belt clip on carry case

Inside case, doubles as a handheld light

44 45 HEADLAMPS

7041 7451 6 CHIP LED HEADLAMP MICRO HEADLAMP

105ft 80 80 3 x AAA 13 6.5 1 x AAA

• Cloverleaf Multi-Reflector System • Crystal Reflector Tube system • High intensity LED; white beam • 3 high intensity LEDs; 1 white in front, • Lightweight, comfortable 2 blue safety lights in rear • Front switch • Hinged attachment to position beam • Metal casing & adjustable elastic straps • Rear on/off switch HEADLAMPS

7468 1041 REVOLUTION HEADLAMP with VLT REVOLUTION TRIPLEX HEADLAMP with VLT

344ft 110 4 3 x AAA 102ft 60 17 3 x AAA

• Prism Reflector System • Cloverleaf Multi-Reflector System • High intensity LED; white beam • 3 high intensity LEDs; white beam • Variable Light Output Technology (dimming function) controls light output • Variable Light Output Technology controls brightness • Hinged attachment to position beam • Hinged attachment to position beam • Metal & plastic casing, adjustable elastic straps • Metal & plastic casing, adjustable elastic straps • Front switch • Front switch

46 47 HIGH PERFORMANCE 8737 X21R RECHARGEABLE LIGHT

High Performance. COAST LED Lenser lights are the most technologi- 2,034ft 1500 cally advanced LED lights available today. Combining the highest qual- 4 x D 1,903ft 1250 5.5 NI-NH 16.5 ity LEDs with patented advanced lens and optic systems, COAST LED 475ft 280 10 Lenser High Performance flashlights produce beams that are brighter The revolutionary X21, released in 2009, than other LED lights and can be easily adapted to any use. is now available in a rechargeable bat- tery version. Giving off more than 1500 lumens – an effective range of more than six football fields – the X21R combines focusable task lighting with 5.5 hours of battery life on 4 D cell alkaline batteries or the provided rechargeable lithium ion battery.

• 16.5 inches long / 3.6 inch head diameter • Aluminum body • Advanced Focus System™– Includes carrying case Multi-Optic • Speed-Focus™ • Three step Quick-Cycle Switch™ function–press for maximum light, click for high light, click again for low • Powered by included HIGH PERFORMANCE rechargeable battery or four D batteries • Charging cradle and wall mount included • Microcontroller switch system • Anti-roll hood and tail cover

Includes wall mount and AC recharging unit

Speed-Focus™

48 49 8307 include all these ways to recharge NEW! HIGH PERFORMANCE 8307R M7R 8437 X21 837ft 220 1 x 771ft 180 12 ICR188650 6 1,532ft 1300 155 4 x D 15.5 Includes AC recharging unit 328ft 30 20.5 443ft 230 244 The M7R combines the incredible brightness and With 1300 lumens of focusable light, compact size of the best selling P7 with added fea- the X21 is the choice when only the brightest tures and the convenience of a rechargeable battery. light available will do. Also comes in a The M7R produces 220 lumens of focusable light, rechargeable X21R version. includes a strobing mode, and features the upgraded (see pg 49) Advanced Focus System™ that allows users to lock in their preferred spot or focus beam. The unique mag- Includes wall mount Recharges in USB port, too netic recharging system is easy to use with or without • Aluminum body the included wall mount. • Advanced Focus System™–Multi-Optic • Speed Focus™ • Advanced Focus System™ • Three step Quick-Cycle Switch™ • Speed Focus™ function–press for momentary light, click for • Magnetic recharging system high light, click again for low light • Microcontroller switch system • Carrying case included Magnetic recharger makes • Intelligent clip included—0317 it easy to recharge the unit

Speed-Focus™ HIGH PERFORMANCE NEW! 8307T MT7

Includes carrying case

837ft 220 Variable Light Output 771ft 180 3.5 4 x AAA 5.75 328ft 30 11

The MT7 upgrades the popular T7 with a new features Maximum Light Output that improve functionality for all users. The MT7 produces Speed-Focus™ 220 lumens of focusable light, includes a strobing mode, and features the upgraded Advanced Focus System™ that allows users to lock in their preferred spot or focus beam. Signal The on/off switch has also been upgraded with a new texturized rubber coating that provides more water resistance and better reliability.

Strobe • Advanced Focus System™ • Speed Focus™ • Microcontroller switch system • Intelligent clip included— Speed-Focus™ SOS 0317

50 51 HIGH PERFORMANCE

8705 P5R

Speed-Focus™ 623ft 210 3 1 x ICR14500 4.75 164ft 18 7 LI-ION

The compact and bright P5 is now available in a rechargeable version, the P5R. The unique magnetic recharging system is easy to use with or without the included wall mount. 8414 P14 • Aluminum body • Advanced Focus System™ • One-Handed Speed-Focus™ 919ft 210 • Slide focus has a twist to lock/unlock at any point in the Slide focus. 804ft 155 104 4 x AA 8.5 • Powered by included Li-Ion rechargeable 394ft 33 84 battery • Magnetic charger cord and The P14 uses LED Lenser’s popular tactical casing in a slightly larger wall mount included size that allows for the use of the world’s most common battery, the • Microcontroller system AA. Producing 210 lumens, the P14 has the brightness and battery run time professionals are looking for.

• Aluminum body

• Advanced Focus System™ HIGH PERFORMANCE • One-Handed Speed-Focus™ • Three step Quick-Cycle Switch™ function–press for maximum light, click for high light, click again for low light • Sheath included

Includes wall mount 8407 P7

Speed-Focus™

689ft 200 656ft 150 55 4 x AAA 5.5 295ft 30 64 Optional Universal/ Picatinny Rail Mount The P7 Tactical should be standard equipment on every duty belt. available on page 65 With 200 lumens of focusable light and up to 64 hours of battery life from standard AAA batteries, it will far outshine any other light of its size.

• Aluminum body • Advanced Focus System™ • One-Handed Speed-Focus™ • Three step Quick-Cycle Switch™ function– Speed-Focus™ press for maximum light, click for high light, click again for low light Magnetic recharger makes • Sheath included it easy to recharge the unit

52 53 HIGH PERFORMANCE

8417 P17

Speed-Focus™ 1082ft 220 984ft 190 385 3 X D 13 459ft 40 480 8421 T5 With over 480 hours of light from one set of batteries and 220 lumens of focusable light, the P17 will be ready to go when you really need a bright light. 426ft 105 3 1 x AA 4.75 • Aluminum body • Advanced Focus System™ Using the same PTT Technology as the P5 and LED Lenser’s • One-Handed Speed-Focus™ Speed-Focus™ technology. • Three step Quick-Cycle Switch™ function–press for maximum • Aluminum body light, click for high light, click • Advanced Focus System™ again for low light • One-Handed Speed-Focus™ • Tactical style rear switch • Sheath included HIGH PERFORMANCE

Speed-Focus™

8420 T7

689ft 200 656ft 150 55 4 x AAA 5.75 295ft 30 64

The T7 brings the same incredible combination of brightness and size as the P7, a tactical style, and LED Lenser’s new Speed-Focus™ technology. Speed-Focus™ • Aluminum body • Advanced Focus System™ • One-Handed Speed-Focus™ • Three step Quick-Cycle Switch™ function– press for maximum light, click for high light, click again for low light • Sheath included

54 55 HIGH PERFORMANCE

Speed-Focus™

Speed-Focus™ 8403 P3 8313 K3 102ft 16 6.5 1 x AAA 3.95

108ft 15 2 4 x AG13 2.75 The P3 is under four inches long and about as big around as a pen, making it perfect for a pocket. Weighing only 1.2 oz., the K3 offers dependable light output in a micro • Aluminum body sized package. • Advanced Focus System™ • One-Handed Speed-Focus™ • Aluminum body • Tactical style rear switch • Advanced Focus System™ • One-Handed Speed-Focus™ • Rear switch HIGH PERFORMANCE

Speed-Focus™

Speed-Focus™ 8405 P5

426ft 105 3 1 x AA 4.75 8406 P6 The P5 offers the best combination of small size and bright light. 476ft 130 8 2 x AA 6.75 • Aluminum body • Advanced Focus System™ For those looking for a bright light with a slim profile the P6 • Tactical style rear switch is the answer. • One-Handed Speed-Focus™ • Sheath included • Aluminum body • Intelligent clip included—0315 • Advanced Focus System™ • One-Handed Speed-Focus™ • Tactical style rear switch • Sheath included

56 57 HIGH PERFORMANCE

8402 P2

75ft 14 6.5 1 x AAA 4

The P2 Moon Lens casts a perfectly circular beam of light that is great for all kinds of work. • • Moon lens • Aluminum body • Pocket clip • Twist focus • Rear switch HIGH PERFORMANCE

8404 P4

88ft 20 3.5 2 x AAA 5.75

The P4 Moon Lens casts a perfectly circular beam like the P2, but in a slightly larger light.

• Moon lens • Aluminum body • Pocket clip • Twist focus • Rear switch

58 59 GEAR NEW! 0315 NEW! INTELLIGENT SWIVEL CLIP FOR P5 0039 Pouch INTELLIGENT POUCH WITH SWIVEL CLIP & COLORED FILTERS

• For P7 and T7 lights • Pouch has built-in swiveling belt clip • Pouch top opening enables use of light even when sheathed • Includes 4 colored filters to install in top of pouch 0317 INTELLIGENT SWIVEL CLIP FOR P7, M7R AND MT7

Intelligent Clip Swivels for 0318 INTELLIGENT SWIVEL CLIP FOR P14 Multi-Position Carry GEAR

Included colored filters feature 0319 anti-reflective coating to ensure INTELLIGENT SWIVEL CLIP FOR D-CELL LIGHTS maximum available light passes Swiveling clip The COAST LED Lenser Intelligent Clip securely through each filter lens. on back of holds a variety of lights and clips to belt or waist- pouch enables band. For extra convenience, the clip swivels, multi-position carry; just click enabling the user to focus the beam of light into position. exactly where it’s needed. Includes Set of Colored Filters II6067 Filters store in Tripod Mount for X21, X21R & P17 The Intelligent Pouch includes four glass filters that enable the user to change the flashlight’s elastic pocket beam color for different applications. Filters feature anti-reflective coating that ensures maxi- on back of Sturdy, threaded tripod mount enables user to attach the X21, X21R or P17 to tripod stand, turning a handheld light pouch. mum available light passes through each filter lens. Just snap the selected filter into place in into an area light. the IP’s rubberized filter cap to change colors. All filters store conveniently in elastic pocket on back of sheath.

WHITE—ideal for all-purpose RED—best for preserving night YELLOW—for non-emergency signal- illumination; provides perfect vision; does not cause pupils to ing and enhanced color rendering color distinction and clarity constrict

GREEN—preserves night vision but BLUE—preserves night vision; one with adequate color distinction; of the few colors of light that will cut allows hunters to safely move through fog; also used to distinguish about at night or read maps blood from other fluids, blood appears without scaring off game black. Or combine blue light with red II6067 Tripod mount in use light for superior blood tracking

60 61 GEAR

2001 2002 2003 2021 2026 2027 DEEP NYLON SHEATH DEEP NYLON SHEATH DEEP NYLON SHEATH FLAT NYLON SHEATH BASKETWEAVE SMOOTH LEATHER SHEATH with Foldover Closure with Foldover Closure with Foldover Closure with Foldover Closure LEATHER SHEATH with Snap Closure with Snap Closure • Durable Nylon • Durable Nylon construction • Durable Nylon • Durable Nylon • Genuine leather construction • Velcro® closure construction construction • Genuine leather construction • Velcro® closure • Belt loop on back • Velcro® closure • Velcro® closure construction • Heavy duty stitching • 6 inch length • 4.5 inch length • Belt loop on back • Belt loop on back • Handsome • Durable snap closure • 1 inch depth • 1 inch depth • 5 inch length • 6.5 inch length basketweave • Leather 2.5 inch belt • Belt loop on back • 1 inch depth texture loop on back • Heavy duty stitching • 6 inch length • Durable snap closure • Leather 2.5 inch belt loop on back • 6 inch length GEAR

2007 2008 2009 2029 PARTITIONED FLAT NYLON SHEATH RIGID SHEATH FLAT NYLON SHEATH NYLON SHEATH with Foldover Closure with Open Top with Foldover Closure 7859 with Foldover Closure DC CAR CHARGER • Durable Nylon construction • Durable Nylon cloth • Durable Nylon • Durable Nylon • Velcro® closure over rigid substructure construction • Plugs into vehicle’s cigarette construction • Belt loop on back • Steel belt clip on back • Velcro® closure lighter to recharge light • Two compartments • 6.8 inch length • Reinforced clip attachment • Belt loop on back • For use with model 7853 • Velcro® closure • 5 inch length • 6.25 inch length • Belt loop on back • 6.3 inch length

BATTERY NUMBER PER PRODUCT TYPE PACKAGE NUMBER AG5 2 TT7714CP AG13 2 TT7701CP HP998407 AAAA 4 TT7722CP 2018 2019 2020 FLARE CONE AAA 4 TT7721CP PADDED SHEATH PADDED SHEATH FLAT NYLON SHEATH • Fits P7 & T7 AA 4 TT7720CP with Foldover Closure with Partial Closure with Foldover Closure CR14500 1 TT7792CP • Durable Neoprene® • Durable Neoprene® • Durable Nylon construction ICR14500 1 TT6103CP construction construction • Velcro® closure ICR18650 1 TT6102CP • Velcro® closure • Velcro® closure • Belt loop on back AA NI-HM Rechargeable 4 TT6101CP • Nylon belt loop on back • Nylon belt loop on back • 5.5 inch length • 3 inch length • 3.5 inch length D NI-HM Rechargeable 4 TT6104cP HP998414 AAA NI-MH Rechargeable 3 TT6105CP FLARE CONE 20H NI-MH 4 TT7702CP • Fits P14 40H NI-MH 1 TT7793CP C 2 TT7723CP D 2 TT7724CP

62 63 GEAR

2028 5451 5710 SMOOTH LEATHER SHEATH HEAVY DUTY NYLON SHEATH RIGID NYLON SHEATH with Snap Closure with Foldover Closure • Durable Nylon cloth over • 3 inch belt loop fits all • Durable Nylon construction rigid substructure duty belts • Heavy duty reinforced • Velcro® closure • 6.375 inch length stitching • 6.625 inch length • Durable rock stitched • Velcro® closure • Belt loop on back construction • 6.3 inch length • Full grain vegetable tanned • 2.5 inch belt loop drum dyed double shoulder on back leather GEAR

5713 5714 5715 RIGID NYLON SHEATH RIGID NYLON SHEATH RIGID NYLON SHEATH • Durable Nylon cloth over • Durable Nylon cloth over • Durable Nylon cloth over rigid substructure rigid substructure rigid substructure • Velcro® closure • Velcro® closure • Velcro® closure • 8.75 inch length • 7 inch length • 6.5 inch length • Belt loop on back • Belt loop on back • Belt loop on back

7733TS 8400RM PRESSURE SWITCH UNIVERSAL/PICATINNY for use with model RAIL MOUNT 7736TS for use with model 8407 P7 or 8420 T7

5716 5717 RIGID NYLON SHEATH RIGID NYLON SHEATH • Durable Nylon • Durable Nylon cloth over cloth over rigid rigid substructure substructure • Velcro® closure • Velcro® closure • 5.25 inch length • 5.5 inch length • Belt loop on back • Belt loop on back 7733RM UNIVERSAL/PICATINNY RAIL MOUNT for use with model 7736TS

64 65 GENERAL USE

HUNTING

PROFESSIONAL USE

TACTICAL USE

OUTDOOR USE

FISHING

GEAR KNIVES GENERAL USE 69 D LE Light D LE Light D LE Light CK KBA L OC IFE TOO ING L 440C stainless steel drop steel stainless 440C blade point handle Zytel™ 2.5 in. closed 4.5 in. overall Lockback 440C stainless steel drop point blade point drop steel stainless 440C handle Zytel™ one-handed opening for nail nick Large lifter cap light, bottle LED Includes 3 in. closed 4 in. overall lock Liner Red LED in handle LED Red blade point drop steel stainless 440C serration with partial aluminum handle Anodized one-handed opening for Thumb stud 1.5 in. closed 3.5 in. overall Lockback CG1204 KEY R • • • • • • C53B, C53R C53B, 3-IN-1 • • • • • • • C50S E KN LIT • • • • • • • T’S General Use knives and knives Use General T’S

AS

CO tasks. everyday for perfect are tools bone, and stag brass, steel, stainless 440C rose- Tough in combine that materials the some of are wood; these many our from Choose pocketknives. of selection fine this feature that designs state-of-the-art select or styles classic executive compact From materials. high-tech latest the the made of are folders these knives, working big to knives them Keep components. and top-quality steel cutlery finest always vehicle—they’re your briefcase, purse, in pocket, you job whatever or a cord, cut open a package, to ready done. get to need

68 GENERAL USE GENERAL KNIVES GENERAL USE 71

KMAN KMAN KMAN TOC TOC TOC DIUM S 440C stainless steel blades blades steel stainless 440C & sheepfoot) spey (clip, rivets brass with bolster metal Nickel handle scales and ABS 4 in. closed blades steel stainless 440C & sheepfoot) spey (clip, rivets brass with bolster metal Nickel handle scales and ABS 2.75 in. closed 440C stainless steel blades blades steel stainless 440C & sheepfoot) spey (clip, with bolster metal Nickel ABS and rivets brass handle scales 3.5 in. closed • • • C319 SMALL S • • • C339 LARGE S C329 ME • • •

TANG LT 440C stainless steel clip point blade point clip steel stainless 440C handle Rosewood 4.5 in. closed 8 in. overall sheath belt Leather LockbacK 440C stainless steel clip point blade point clip steel stainless 440C handle Rosewood 3.75 in. closed 6.75 in. overall sheath belt Leather Lockback • • • • • • MUS C103 C102 CO • • • • • •

70 GENERAL USE GENERAL KNIVES GENERAL USE 73 IFE LDER KN LDER 440C stainless steel blade steel stainless 440C handle Rubberized one-handed opening for Thumb stud 3.5 in. closed 6.5 in. overall clip Belt lock Liner 440C stainless steel drop point blade with with blade point drop steel stainless 440C serration partial handle Rubberized one-handed opening for Thumb stud 4 in. closed 7 in. overall clip Belt lock Liner Titanium coated 440C stainless stainless 440C coated Titanium blade point drop steel handle design cutout slim Super opening one-handed for cutout Blade 3 in. closed 5 in. overall lock Liner NEW! C36 FO TALON • • • • • • • C10 RA LIGHT ULT NEW! C008 D FO SERRATE • • • • • • • • • • • • •

IFE IFE K KN K KN C C

KBA KBA Mirror polished 440C stainless stainless polished 440C Mirror blade point clip steel handle steel stainless Brushed 3 in. closed 5.5 in. overall Lockback 440C stainless steel clip point blade point clip steel stainless 440C aluminum handle aircraft Lightweight accents brass with one-handed opening for Thumb stud 3.5 in. closed 6 in. overall Lockback C7000T LOC • • • • • LOC C7200 • • • • • •

72 GENERAL USE GENERAL KNIVES HUNTING 75

IFE NGLDI KN NGLDI SAW Titanium coated 440C stainless steel steel stainless 440C coated Titanium blade point drop handle scales Wood one-handed opening for Thumb stud 4.875 in. closed 8.75 in. overall lock Liner 440C stainless steel steel stainless 440C double with blade saw cut teeth handle with ABS Durable grip comfort rubberized lanyard Includes 6.25 in. closed 11 in. overall lock button Safety C1104 FO • • • • • • C9150 FO • • • • • •

. ®

Big, strong, and rugged—that’s how COAST hunting knives knives hunting COAST how and rugged—that’s strong, Big, - stain 440C forged hot-drop made of is blade built. Each are including materials, of variety in a come Handles steel. less Kraton sure-grip bone, and stag and brass, hardwood natural these knives, skinning tough of variety a Bowie to big our From companions trusted be to designed are knives field-tested outdoors. great in the

74 HUNTING KNIVES HUNTING 77

440C stainless steel skinning blade skinning steel stainless 440C handle Hardwood guard stainless Brushed & pommel 8.5 in. overall sheath Leather point blade point handle Hardwood 7 in. overall sheath Leather Bowie blade steel stainless 440C handle Hardwood & pommel guard Brass 14 in. overall sheath Leather 440C stainless steel trailing trailing steel stainless 440C C602 KNIFE SKINNING • • • • • • • • • C927 KNIFE BOWIE • • • • • C652 HUNTER HARDWOOD

IFE OWIE rubber handle rubber ® ONE B ONE HUNTER ONE

INNING KN 440C stainless steel steel stainless 440C Bowie blade bone handle Stag &steel accents Brass 13.25 in. overall sheath Leather 440C stainless steel steel stainless 440C trailing point blade blade point trailing bone handle Stag 7.5 in. overall sheath Leather 9.5 in. overall sheath Molded nylon 440C stainless steel steel stainless 440C blade skinning Kraton

AG B AG B • • • • • • • • • • • • • C827SB BRANDS GRANDPA ST CSH-50 CSH-50 SK C8520SB C8520SB BRANDS GRANDPA ST

76 HUNTING KNIVES HUNTING 79 KINNER S Damascus stainless steel hunting blade hunting steel stainless Damascus handle staghorn Genuine accents steel and Brass 9.5 in. overall sheath Leather AMASCUS C244398 D • • • • • Blade steel folded for the second time in Damascus the second for folded Blade steel process

BOWIE Damascus stainless steel steel stainless Damascus blade hunting handle staghorn Genuine accents steel and Brass 11 in. overall sheath Leather AMASCUS C244397 D • • • • • The Beauty and Function Function and Beauty The of Damascus Steel of 72 layers have knives bladed Damascus These carbon of layers 6 inner around wrapped steel stainless hot, then red heated are steel of layers These steel. steel. of layers 78 the intertwine to rope like twisted an with available blades strongest the is The result carbon of core an inner and steel stainless of core outer blade Each edge. fine cutting the provides which steel, exactly look blades no two as design own unique its has alike. with blade an ideal provides steels of The combination needed and toughness flexibility of degree perfect the knife. in a hunting production durable most strongest, the are These Damascus These created. ever have we that knives last. and to work made to are hunters

Damascus stainless steel drop drop steel stainless Damascus blade point handle steel stainless blasted Bead wood inlay Thuya with 3.75 in. closed 6.5 in. overall Lock Liner Damascus stainless steel steel stainless Damascus blade point drop aluminum anodized Textured, wood inlay Thuya with handle 4 in. closed 7 in. overall Lock Liner Damascus stainless steel steel stainless Damascus blade point drop steel stainless blasted Bead handle with Thuya wood Thuya handle with overlay 4.5 in. closed 8 in. overall Lock Liner C244301 DAMASCUS FOLDER • • • • • C244501TH DAMASCUS FOLDER • • • • • C244305 DAMASCUS FOLDER • • • • •

78 HUNTING KNIVES PROFESSIONAL USE 81 HANDLE HANDLE , BLACK OCKBACK FOLDER RAME 440C stainless steel drop point blade partial partial blade point drop steel stainless 440C serration weight lighter for handle Cutout 3.5 in. closed 6 in. overall clip Belt lock Liner 440C stainless steel clip point blade with partial serration partial with blade point clip steel stainless 440C handle Zytel™ Textured one-handed opening for Thumb stud 2.5 in. closed 4.5 in. overall Lockback • • • • • • • • • • • • C20136PL X-F NEW! NEW! CG002PL L RING KEY quality, pro-level provide knives Use Professional COAST knives of selection find a You’ll versatility. and durability, modern offer They tasks. toughest your on take to built highest the with combined materials and high tech design and craftsmanship. quality manufacturing of level IONAL USE

ESS

80 PROF KNIVES PROFESSIONAL USE 83 440C stainless steel clip point blade with serration with blade point clip steel stainless 440C handle Zytel™ Textured 4 in. closed 6.75 in. overall clip Belt Lockback Titanium coated 440C stainless steel drop point blade with partial partial with blade point drop steel stainless 440C coated Titanium serration handles open-frame steel Brushed 3.5 in. closed 6 in. overall clip Belt lock Liner HANDLE OCKBACKLACK B FOLDER, • • • • • • NEW! CG004PL L Now with Partial Serration Partial Now with C22 LARGE Z-FRAME • • • • • • IMPROVED! D LE Light BLADE OCK 440C stainless steel steel stainless 440C serration partial with blade point Drop opening one-handed for Thumb-stud grip inserts sure aluminum handle with Lightweight 5 in. closed 8 in. overall hole Lanyard clip Pocket batteries CR1620 (2) two Uses lock Liner NEW LED NEW LED Technology Knife C7400 LED L • • • • • • • • • • LED in knife handle IONAL USE

ESS

PROF 82 KNIVES PROFESSIONAL USE 85

inlay handle inlay ® drop point blade blade point drop handles open-frame steel Brushed one-handed easy for Thumb stud opening 2.5 in. closed 4.38 in. overall lock Liner Titanium coated 440C stainless steel steel stainless 440C coated Titanium • • • • • • C21 SMALL Z-FRAME drop point blade blade point drop handle design Incised one-handed opening for Thumb stud 4.5 in. closed 7.75 in. overall clip Belt lock Liner blade point clip steel stainless 440C serration with partial with Kraton steel stainless Brushed Titanium coated 440C stainless steel steel stainless 440C coated Titanium Thumb stud for one-handed opening for Thumb stud 4.25 in. closed 7.25 in. overall clip Belt lock Button • • • • • • • C05 KNIFE LOCK BUTTON • • C12 FOLDER • • • • •

inlay ® Satin finished 440C stainless steel steel stainless finished Satin 440C steel stainless 440C coated Titanium blade point drop handle Open-frame one-handed opening for Thumb stud 4.25 in. closed 7 in. overall clip Belt lock Liner drop point blade Bead blasted handle blasted Bead blade point drop Kraton with Sure-grip handle inserts Sure-grip one-handed opening for Thumb stud 4.25 in. closed 7.25 in. overall clip Belt lock Liner C02 KNIFE LOCK LINER SKELETON FOLDER SKELETON • • • • • • • C07 • • • • • • • IONAL USE

ESS

PROF 84 TACTICAL USE

CUS100 RAPTOR TACTICAL/FIELD KNIFE

• Black powder coated 440C stainless steel • Rubber handle • Stainless steel finger guard • Carbide tip for breaking Plexiglas®, plastic & glass • Saw back cuts wood, PVC, nylon rope • 11 in. overall • Molded Kydek™ sheath

Tactical Use knives are built to handle the highest level of day-in, day-out use as well as providing high performance tactical styling. We use high-quality blade steels, advanced performance-enhancing coatings, and lightweight handle materials that provide a secure grip without adding KN unnecessary weight. All of these products I VES will accept a lanyard so it’s easy to keep your most important tools close at hand.

Many COAST tactical use knives have been TACTIC USE AL tested and approved for use by the U.S. Mili- tary. We are proud to produce these knives for our troops. These knives are designated with our Military Approved seal. NEW! C20136MB X-FRAME FOLDER

• Titanium coated 440C stainless steel drop point blade with partial serration • Cutout handle for lighter weight • 6 in. overall • 3.5 in. closed • Belt clip • Liner lock

86 87 KNIVES TACTICAL USE 89 FOLDER OCK KNIFE L RAME UTTON KELETON Titanium coated 440C stainless steel clip point blade with partial partial with blade point clip steel stainless 440C coated Titanium serration handle inlay Kraton® with steel stainless brushed coated Titanium one-handed opening for Thumb stud 4.25 in. closed 7.25 in. overall clip Belt lock Button partial with blade point drop steel stainless 440C coated Titanium serration handle Open-frame one-handed opening for Thumb stud 4.25 in. closed 7 in. overall clip Belt lock Liner Titanium coated 440C stainless steel drop point blade with partial partial with blade point drop steel stainless 440C coated Titanium serration handle Open-frame 3.5 in. closed 6 in. overall clip Belt • • • • • • • • • • • • • • NEW! C22B Z-FBLACK • • • • • NEW! C03B B BLACK NEW! C07B S BLACK

HANDLE HANDLE , BLACK OCKBACK

Titanium coated 440C stainless steel steel stainless 440C coated Titanium clip steel stainless 440C coated Titanium serration with blade point handle Zytel™ Textured one-handed opening for Thumb stud 4 in. closed 6.75 in. overall clip Belt Lockback clip point blade with partial serration partial with blade point clip handle Zytel™ Textured one-handed opening for Thumb stud 2.5 in. closed 4.5 in. overall Lockback Titanium coated 440C stainless steel steel stainless 440C coated Titanium serration partial with blade point clip handle Zytel™ Textured one-handed opening for Thumb stud 4 in. closed 7 in. overall clip Belt Lockback

HANDLE OCKBACK BLACK FOLDER, • • • • • • • • • • • • • CG006 FOLDER TITANIUM • • • • • • • NEW! CG004BH L CG002BH L RING KEY NEW!

88 ALUSE TACTIC KNIVES TACTICAL USE 91

inlay ® Thumb stud for one-handed opening for Thumb stud 4.75 in. closed 8.25 in. overall clip Belt lock Liner Bead blasted 440C stainless steel steel stainless 440C blasted Bead blade point tanto aluminum with Brushed Kraton

• • • • • C04 LOCK LINER TANTO • • drop point blade with partial partial with blade point drop serration handle Graphite for Thumb stud one-handed opening 4.25 in. closed 7 in. overall clip Belt lock Liner Titanium coated 440C stainless steel steel stainless 440C coated Titanium • • • • • • • C08 FOLDER TITANIUM

Titanium coated 440C stainless steel steel stainless 440C coated Titanium blade point drop weight lighter for design handle Cutout one-handed opening for Thumb stud handle liners Steel 4.125 in. closed 7.375 in. overall clip Belt lock Liner Titanium coated 440C stainless steel steel stainless 440C coated Titanium serration partial with blade point drop coating rubberized handle with Steel one-handed opening for Thumb stud 3.25 in. closed 5.75 in. overall lock Liner C19 KNIFE TACTICAL • • • • • • • • C20146 FOLDER TITANIUM • • • • • •

90 ALUSE TACTIC KNIVES OOUTDOOUTDOOR USE 93 & LED LIGHT OMPASS OOL WITH C OOL T 440C stainless steel construction steel stainless 440C in handle LED Red inlays logo COAST handle with Rubberized set mini bit 8 piece bottle bottle pliers, pliers, scissors, scissors, blade, blade, knife knife small small blade, blade, knife knife large large Includes Includes slotted slotted hook, corkscrew, hook, corkscrew, hole punch, hole punch, stripper, stripper, wire wire opener, opener, can can opener, opener, fold-out fold-out in handle, in handle, LED LED red red tip, tip, screwdriver screwdriver slotted slotted mini mini tip, tip, screwdriver screwdriver in handle compass 3.5 in. closed • • • • • • C3785 OUTDOOR MULTI-FUNCTION NEW!

Camping, hiking, climbing, biking—whatever your favorite outdoor favorite your biking—whatever climbing, hiking, Camping, you. with take to want you’ll tools handy the has COAST adventure, (as outdoor of demands the up to stand tough—to built all They’re a at always is weight and size know we indoor) use. Because as well products Use Outdoor our of many activities, outdoor during premium products. in our tools more get You capability. multi-function have handy our one of or knife Adventurer multi-function the it’s Whether tools outdoor the has COAST sets, cook camp Blade Exchange need. you

92 R USE OUTDOO KNIVES OUTDOOR USE 95 OMMANDER C Stainless steel blades and tools blades steel Stainless handle aluminum Textured blade, knife small blade, knife large Includes stripper, wire opener, can opener, bottle scissors, slotted small tip, screwdriver slotted hole punch, tip, screwdriver Phillips blade, saw tip, screwdriver ring key 3.5 in. closed 6.25 in. overall Stainless steel blade and tools and blade steel Stainless aluminum handle Textured scissors springless tip, screwdriver file, mini blade, knife Includes 2.25 in. closed 3.75 in. overall ring Key tools and blades steel Stainless aluminum handle Textured opener, bottle blade, knife small blade, knife large Includes screwdriver slotted hole punch, stripper, wire opener, can tip, screwdriver Phillips tip, screwdriver slotted small tip, ring key 3.5 in. closed 6.25 in. overall ETAL NEW! C5037 KNIFE 11-FUNCTION • • • • • NEW! C5017 M • • • • • • NEW! C5034 KNIFE 10-FUNCTION • • • • •

Satin finished 440C stainless steel steel stainless finished Satin 440C Satin finished 440C stainless steel steel stainless finished Satin 440C blade point clip handle inlaid Rubber & lining Solid bolsters 3.75 in. closed 7.25 in. overall sheath Nylon belt Lockback blade point clip handle inlayed Rubber & lining Solid bolsters 3.75 in. closed 6.75 in. overall sheath Nylon belt Lockback C2040-4 KANGAROO C2040-5 CROCODILE • • • • • • • • • • • • • •

94 R USE OUTDOO KNIVES OUTDOOR USE 97 Titanium coated 440C stainless steel steel stainless 440C coated Titanium serration partial with blade point clip handle Zytel™ Textured one-handed opening for Thumb stud 4 in. closed 6.75 in. overall clip Belt Lockback CG004 KNIFELOCKBACK • • • • • • •

Stainless steel tools steel Stainless spatula, blade, cook’s Includes fork 2 prong handles grip 2 comfort case Nylon carry C3300 KIT CUTLERY BLADE EXCHANGE 3-TOOL • • • • Titanium coated 440C stainless steel steel stainless 440C coated Titanium serration partial with blade point clip handle Zytel™ Textured one-handed opening for Thumb stud 2.5 in. closed 4.5 in. overall Lockback CG002 LOCKBACK RING KEY • • • • • •

drop point blade point drop aluminum handle Anodized one-handed opening for Thumb stud 3.75 in. closed 6.25 in. overall clip Belt on back clip Carabiner lock Liner Titanium coated 440C stainless steel steel stainless 440C coated Titanium 440C stainless steel drop point blade point drop steel stainless 440C aluminum handle Anodized one-handed opening for Thumb stud 4 in. closed 6.75 in. overall on back clip Carabiner lock Liner Titanium coated 440C stainless steel steel stainless 440C coated Titanium blade point drop handles open-frame steel Brushed 3.5 in. closed 5.875 in. overall clip Belt lock Liner • • • • • • • • C09 CARABINER WITH KNIFE FOLDING C13 CARABINER WITH KNIFE FOLDING • • • • • • • NEW! C22SG LARGE Z-FRAME • • • • • •

96 R USE OUTDOO FISHING

C849 KN 9 INCH FILLET I VES

• “Flex” 440C stainless steel fillet blade with partial serration • Kraton® handle

• 9 in. blade FISHING • 14.5 in. overall • Molded plastic sheath

COAST Fishing Knives are designed to give you top perfor- mance and value. From our Exchange Blade Fishing Set, which lets you pack more knives in less space, to a choice of fillet blades that will make quick work of your catch, you’re sure to find the perfect knife to add to your tackle box.

98 99 KNIVES FISHING 101 3 interchangeable 3 interchangeable steelstainless blades handle blade Exchange blade 6 in. fillet blade 5 in. boning bait serrated 4 in. blade cutting sheath Nylon belt C846X BLADE EXCHANGE ANGLER SET FISHING • • • • • •

handle ® FILLET

7 in. blade 12.5 in. overall sheath Molded plastic “Flex” stainless steel steel stainless “Flex” blade fillet Kraton fillet blade fillet handle Zytel™ 7.5 in. closed 13 in. overall Lock back “Flex” stainless steel steel stainless “Flex” • • • C846 7 INCH • • • • • • • C899 FILLET FOLDING

100 FISHING KNIVES GEAR 103

in an even more compact size compact more in an even Does everything the CM-1 does but but does CM-1 the everything Does Features diamond particle coated coated particle diamond Features rod sharpening tools, knives, Sharpens fish hooks even scissors, • CM-2 SHARPENER DIAMOND MEDIUM CM-1 SHARPENER DIAMOND LARGE • • -

Protect your investment in COAST quality products products quality COAST in investment your Protect and light leather traditional of selection our with of also find a choice You’ll sheaths. nylon weight Arkansas traditional the tools—from sharpening Sharpeners— Diamond pocket-sized our to stone Shears. Utility durable our plus

102 GEAR KNIVES GEAR 105

THS closing ® ON SHEA Includes belt loop and embroidered loop and embroidered belt Includes logo COAST Durable nylon construction nylon Durable secure stitching, duty Heavy Velcro • CPB-5 SHEATH NYLON FLAT closure foldover with NYL • • CPB-100 SHEATH GUSSETED and tools large for knives CPB-4 SHEATH NYLON FLAT closure foldover with THS HER SHEA THER Durable, harness leather in oxblood in oxblood leather harness Durable, stitching duty heavy with color closure Snap logo COAST Embossed LEA • • • C100 SHEATH LEATHER LARGE C300 SHEATH LEATHER SMALL C200 SHEATH LEATHER MEDIUM

nylon belt sheath belt nylon ®

stone Arkansas natural sized Pocket and easily quickly sharpens everything sharpening for Designed and craft to pocketknives from instruments hobby Includes shears, scissors, bone scissors, shears, Includes tips screwdriver lifter, cap cutter, cleaning easy for unhinge Blades Cordura Durable

SHARPENING STONE SHARPENING • • SOFT ARKANSASSOFT POCKET C14 C9550 SHEARS UTILITY/FIELD • • •

GEAR 104 PROFESSIONAL USE

TACTICAL USE

OUTDOOR USE

FISHING MULTI-TOOLS PROFESSIONAL USE 109 Second LED illuminates Pliers end Pliers LED illuminates Second Includes rigid sheath Includes loop with belt PLIERS™ One LED Illuminates knife edge knife LED Illuminates One OCKET P RO Two built-in LEDs, one at the front, one at the back, click click back, the one at front, the one at LEDs, built-in Two choose to construction steel stainless 440C head pliers Spring-loaded one-handed operation easy for serration partial with blade knife Full-sized handle inlays rubber Sure-grip and medium small lifter, cap scissors, Also includes tip screwdriver Phillips tips, screwdriver slotted batteries CR1616 2 take lights LED 10-15 hours time run LED 4 in. closed • • • • • • • • • NEW! C5899 2 LED P

COAST Professional Use tools offer modern design and design modern offer tools Use Professional COAST level highest the with combined materials high tech Our and craftsmanship. quality manufacturing of to built are tools multi-function Use Professional award-winning These standards. demanding COAST’S consumers. among choice a top become have tools IONAL USE

ESS

108 PROF MULTI-TOOLS PROFESSIONAL USE 111

Bead blasted 440C stainless steel stainless 440C blasted Bead knife opener, bottle 3 wrenches, Includes nail file blade, serration, partial with blade Action scissors, Lever Springless pick, ruler smallscrewdrivers, and large 2.5 in. closed ring Key Phillips screwdriver, saw blade, blade, saw screwdriver, Phillips C3700 TOOLBOX™ MICRO • • • •

Bead blasted 440C stainless steel stainless 440C blasted Bead opener, bottle 4 wrenches, Includes serration, partial with blade knife Lever springless nail pick, file blade, screwdriver, Phillips scissors, Action small and large blade, saw ruler screwdrivers, 3.75 in. closed ring Key 440C stainless steel construction steel stainless 440C with handle inlays grip rubber Sure logo COAST set mini bit 8 piece scissors, file blade, blade, knife Includes wire opener, can opener, bottle pliers, hook, corkscrew, hole punch, stripper, slotted tip,mini screwdriver slotted LED in handle: removable screwdriver, level light, removable 3.5 in. closed C3900 TOOLBOX™ POCKET • • • • C5089 23 FUNCTION KNIFE CARPENTER’S • • • • • PLIERS™ Built in LED light: click for constant on constant for click light: in LED Built construction steel stainless 440C handle inlays grip rubber Sure easy for head pliers loaded Spring one-handed operation in handle, light LED Includes blade, main knife cutter, pliers,wire screw- Philips ring, key blade, saw flathead with opener bottle driver, awl, stripper, and wire tip screwdriver with opener can nail pick, file with tip screwdriver smal flathead CR927 (2) two takes Light batteries hours 8-10 time run LED 3 in. closed Built in LED light: click for constant on constant for click light: in LED Built construction steel stainless 440C handle inlays grip rubber Sure easy for head pliers loaded Spring one-handed operation cut- wire handle, pliers, in light LED Includes wire with file blade blade, main knife ter, small awl, screwdriver, flathead stripper, with opener can screwdriver, flathead screwdriver, Phillips tip, screwdriver flathead with opener bottle saw stripper, and wire screwdriver scissors blade, CR1220 (2) two takes Light batteries 10-15 hours time run LED 4 in. closed • • • • • • • • c2899 LED MICRO POCKET C5799 PLIERS™ LED POCKET • • • • • • • • IONAL USE

ESS

110 PROF TACTICAL USE NEW! C2899B BLACK LED MICRO PLIERS™

• Built in LED light: click for constant on • 440C stainless steel construction • Sure grip rubber handle inlays • Spring loaded pliers head for easy one-handed operation • Includes LED light in handle, pliers, wire cutter, main knife blade, saw blade, key ring, Philips screwdriver, bottle opener with flathead screwdriver tip and wire stripper, awl, file with nail pick, can opener with small flathead screwdriver tip • Light takes two (2) CR927 batteries • LED run time 8-10 hours • 3 in. closed NEW!

C5799B MUL BLACK LED POCKET PLIERS™ TI-

• Built in LED light: click for constant on TOO • 440C stainless steel construction LS • Sure grip rubber handle inlays • Spring loaded pliers head for easy one-handed operation • Includes LED light in handle, pliers, wire TACTIC USE AL cutter, main knife blade, file blade with wire stripper, flathead screwdriver, awl, small flathead screwdriver, can opener with screwdriver tip, Phil- lips screwdriver, bottle opener with flathead screwdriver and wire stripper, saw blade, scis- sors • Light takes two (2) CR1220 batteries • LED run time10-15 hours • 4 in. closed

Includes rigid sheath with belt loop

112 113 MULTI-TOOLS OUTDOOR USE 115

PLIERS™ 440C stainless steel construction steel stainless 440C edges handle—texturized comfort layer Dual aluminium blasted bead durable into inlayed one-handed operation easy for head pliers loaded Spring screwdriver, Phillips small cutter, wire pliers, Includes slotted small scissors, Action Lever springless lifter, cap blade, saw blade, knife tip, screwdriver stripper and wire 2.75 in. closed Titanium coated 440C stainless steel steel stainless 440C coated Titanium serration partial with blade point drop handles cutout steel Brushed one-handed opening for Thumb stud mini scissors, serrated locking Includes screwdrivers and slotted head Phillips 4 in. closed 6.75 in. overall clip Belt lock Liner ICRO C2795 M • • • • • C6100 TOOL KNIFE FOLDING • • • • • • • •

When you’re engaged in outdoor activities, space is always at at always is space activities, in outdoor engaged you’re When multi-tools of selection a offers COAST why That’s a premium. Whether outdoors. the of challenges on the take to designed saw or open a can, screw, a tighten rope, cut to need you you tool the have always Multi-Tools COAST kindling, through tool. multi-function in one compact hand—all at close need COAST. with space in less tools more get You

R USE OUTDOO 114 MULTI-TOOLS OUTDOOR USE 117 Includes rigid sheath Includes loop with belt PLIERS™ Built in LED light: click for constant on constant for click light: in LED Built construction steel stainless 440C handle inlays grip rubber Sure easy for head pliers loaded Spring one-handed operation cutter, wire in handle, pliers, light LED Includes stripper, wire with file blade blade, main knife screw- flathead small awl, screwdriver, flathead Phillips tip, screwdriver with opener can driver, flathead with opener bottle screwdriver, scissors blade, saw stripper, and wire screwdriver batteries CR1220 (2) two takes Light hours 10-15 time run LED 4 in. closed NEW! C5799SG LED POCKET • • • • • • • •

PLIERS™ ICRO

Built in LED light: click for constant on constant for click light: in LED Built construction steel stainless 440C handle inlays grip rubber Sure easy for head pliers loaded Spring one-handed operation in handle, pliers, light LED Includes blade, main knife cutter, wire Philips ring, key blade, saw with opener bottle screwdriver, and tip screwdriver flathead file with awl, stripper, wire opener can nail pick, flathead small with screwdriver tip screwdriver CR927 (2) two takes Light batteries hours 8-10 time run LED 3 in. closed NEW! C2899SG LED M • • • • • • • •

116 R USE OUTDOO FISHING NEW! FT3107 FLOATING LINE CUTTER

• Steel cutting blade cuts braided line • Light weight plastic pliers • Foam handle • Includes lanyard • Floatable

FT8500 FOLDING FISH TOOL & 12-PC. BIT SET

• 440C stainless steel construction • Includes marlin spike, scissors, wire cutter, coarse and fine pliers, foreceps-nose pliers, 3 sizes of crimpers for leaders, stops, and sleeves, main blade with partial serration, Phillips-head screwdriver, bottle opener, screwdriver tip and bit socket • Locking blades for safety • 12 piece bit set; 3 slotted,

3 Phillips, 6 hex MUL

• Nylon case TI- TOO LS

Tool folds to carry in bit case

COAST Fishing tools provide a lot of function in a compact space. FISHING They are built to the highest COAST standards of manufacturing excellence and designed to provide top performance.

Bit set includes 3 slotted, 3 Phillips, 6 hex

118 119 FISHING

FT6500 MP2875 6 IN. PRO FISH PLIERS MICRO FISH TOOL • 440C stainless steel construction • 440C stainless steel construction with titanium coating for • Includes needle-nose extra durability pliers, leader cutter, saw, • Sure-grip handles main blade, lever-action • Includes spring-loaded pliers, scissors, wire stripper, 3 crimpers for weights and brass scraper, small Phillips sleeves, wire cutters, split-ring screwdriver, small slotted remover, lanyard screwdriver, file blade, fish hook eye cleaner, key ring • Retractable lanyard attaches tool to fishing vest or pants

FTP8000 9 IN. PRO FISH PLIERS

• 440C stainless steel construction with titanium Molded sheath with FT2401 belt loop and clip coating for extra durability TITANIUM SPLIT-RING PLIERS • Sure-grip handles • Includes spring-loaded pliers, • 440C stainless steel 3 crimpers for weights and brass construction with sleeves, wire cutters, split-ring titanium coating MUL remover, lanyard

for extra durability TI-

• Sure-grip TOO spring-loaded handles LS • Line cutter • Safety lock • Molded sheath FISHING

120 121 SPECIFICATIONS - LIGHTS SPECIFICATIONS - LIGHTS

BATTERY TYPE/ WORKING BATTERY TYPE/ WORKING MODEL MODEL OVERALL WEIGHT SHEATH PAGE MODEL MODEL OVERALL WEIGHT SHEATH PAGE MAX. LUMENS BATTERY PRODUCT BATTERY MAX. LUMENS BATTERY PRODUCT BATTERY NUMBER NAME SIZE (IN.) (OZ.) TYPE # NUMBER NAME SIZE (IN.) (OZ.) TYPE # NUMBER LIFE NUMBER LIFE 3 x AAA Revolution Headlamp 3 x AAA 1006 V2 6 Chip Flashlight 85 6.25 5.50 20 N/A 20 7468 110 N/A 4.20 4 2018 46 TT7721CP with VLT TT7721CP

Revolution Triplex 3 x AAA H4 3x5 mm 3 x AAA 1041 60 N/A 4.20 17 2018 47 7494 30 8.75 3.00 15 N/A 44 Headlamp with VLT TT7721CP LED Headlamp TT7721CP

V2 6 Chip 3 x AAA 3 x AAA 1106 80 6.25 6.00 20 N/A 21 7495 H5 Focusing Headlamp 26 N/A 4.20 11 2018 44 Dual Color Flashlight TT7721CP TT7721CP

V2 9 Chip 2 x C H7 Focusing Headlamp 3 x AAA 1189 59 8.75 14.00 100 N/A 19 7497 170 N/A 4.40 15 2018 45 Dual Color Flashlight TT7723CP with VLT TT7721CP H7R Rechargeable 3 x AAA 4 x AA 7040 Personal Emergency Area Light 17 5.75 9.0 30 N/A 41 7498 Focusing Headlamp 170 N/A 4.40 Ni-MH Rechargeable 3.5 2018 45 TT7720CP with VLT TT6105CP

3 x AAA H14 4 x AA 7041 6 Chip LED Headlamp 80 N/A 4.20 20 2018 46 7499 200 N/A 12.4 2.5 N/A 43 TT7721CP Headlamp TT7720CP

4 x AAA 1 x AAA 7044 Emergency Area Light 15 4.50 4.6 40 N/A 39 75331 Clip Light 10 4.10 2.20 3 N/A 25 TT7721CP TT7721CP

4 x C 5.50 in. Body 2 x AA 7050 4-C Emergency Area Light 60 5.75 16.06 50 N/A 41 7533/2 Camp Light 12 2.50 24 2007 39 TT7723CP 5.13 in. Rod TT7720CP

4 x D 7547 2 x AA 7124HGB Emergency Area Light 125 8.25 32.02 100 N/A 40 V2 Triplex 30 6.00 3.60 16 2008 22 TT7724CP 7547BL TT7720CP

3 x AG5 V8 Standard Torch 2 x AG13 7300 Laser Pointer N/A 2.30 .8 4 N/A 29 7550 1.5 2.25 1.00 7 N/A 23 TT7714CP (red beam) TT7701CP 3 x AG13 3 x AAA 2002 7553BL V8 Standard Torch 12 2.25 .50 9 N/A 23 7345S V2 6 Chip Tactical 80 4.50 3.80 20 37 TT7701CP TT7721CP 2009 2001, 2026, 4 x 20H NI-MH 3 x AAA 7575 Auto LED 13 1.90 9.40 .5 N/A 29 7438 Tactical Focus Beam 115 5.00 5.60 52 2027, 2028, 28 TT7702CP TT7721CP 2029, 5451 1 x AAA 4 x AG13 7451 Micro Headlamp 13 N/A 1.40 6.5 2019 47 7578BL Micro Flex Light 6 6.00 .80 1.3 N/A 25 TT7721CP TT7701CP

4 x AA 4 x AG13 7456 D14 Waterproof Flashlight 150 6.25 12.80 20 N/A 33 7582BL Small Flex Light 13 6.00 2.80 4 N/A 25 TT7720CP TT7701CP

1 x AAA 7583BL Medium Flex Light 13 11.00 4.20 6 N/A 25 TT7721CP

122 123 SPECIFICATIONS - LIGHTS SPECIFICATIONS - LIGHTS

BATTERY TYPE/ WORKING BATTERY TYPE/ WORKING MODEL MODEL OVERALL WEIGHT SHEATH PAGE MODEL MODEL OVERALL WEIGHT SHEATH PAGE MAX. LUMENS BATTERY PRODUCT BATTERY MAX. LUMENS BATTERY PRODUCT BATTERY NUMBER NAME SIZE (IN.) (OZ.) TYPE # NUMBER NAME SIZE (IN.) (OZ.) TYPE # NUMBER LIFE NUMBER LIFE V6 Stainless Steel 3 x AAA 3.75 1 x AAA 7730 110 4.12 7.80 37 2002 32 8403 P3 16 1.60 6.5 N/A 57 Power Chip TT7721CP (3.95 ext.) TT7721CP

V6 Stainless Steel 3 x AAA 5.50 2 x AAA 7732 135 3.62 7.20 48 2002 32 8404 P4 20 2.20 3.5 N/A 59 6 Chip TT7721CP (5.75 ext.) TT7721CP

V2 6 Chip Dual Color 3 x AAA 2002 4.50 1 x AA 7732DUV 70 3.43 6.20 52 29 8405 P5 105 3.00 3 5717 57 Ultraviolet Light TT7721CP 2009 (4.75 ext.) TT7720CP

Red: 3.8 Red: 70 6.50 2 x AA Blue: 1.2 3 x AAA Blue:360 2002 8406 P6 130 4.40 8 5714 56 77364 Signal Light Green:7.5 4.00 6.20 TT7721CP Green: 315 2009 36 (6.75 ext.) TT7720CP White: 70 White: 52 Max 200 5.25 4 x AAA High 55 V2 Tactical 3 x AAA 8407 P7 High 150 7.00 5715 53 7736 110 4.50 6.40 37 2003 36 (5.50 ext.) TT7721CP Low 64 Power Chip Torch TT7721CP Low 30 Max 210 3 x AAA 2002 8.00 4 x AA High 104 7736D V2 6 Chip Dual Color Tactical Torch 120 3.70 6.20 44 37 8414 P14 High 155 13.80 5713 53 TT7721CP 2009 Low 33 (8.50 ext.) TT7720CP Low 84 2001, 2026 Max 220 Power Chip 3 x AAA 12.50 3 x D High 385 7736TS 115 5.00 5.40 52 2027, 2028 35 8417 P17 High 190 12.40 N/A 55 Tactical Light TT7721CP Low 40 (13.00 ext.) TT7724CP Low 480 2029, 5451 Max 200 2 x AAA 5.50 4 x AAA High 55 7817 Inspection Light 9 5.50 2.00 24 2021 22 8420 T7 High 150 7.20 5715 54 TT7721CP Low 30 (5.75 ext.) TT7721CP Low 64 1 x AAA 4.50 1 x AA 7830 Mini Tac 20 3.50 .80 6 N/A 24 8421 T5 105 3.20 3 5716 54 TT7721CP (4.75 ext.) TT7720CP

1 x AAA 15.50 4 x D High 155 7831 Mini Tac 20 3.50 .80 6 N/A 24 8437 X21 High 1300 48.00 N/A 50 TT7721CP Low 230 (16.50 ext.) TT7724CP Low 244

4 x AG5 3 x AAA 7839 Nano Tac Torch 12 2.50 1.60 1 N/A 23 8604 L4 25 5.50 4.00 26 N/A 31 TT7714CP TT7721CP Digitac Rechargeable 1 x CR14500 2 7853 127 4.70 2.60 2020 27 2 x AA Focus Beam TT7792CP (Charge life) 8606 L6 105 6.25 4.50 8 N/A 31 TT7720CP Max 220 1 x ICR18650 Li-ion High 12 8307R M7R High 180 6.00 7.20 Case 51 TT6102CP Low 20.5 3 x AAA Low 30 8607 L7 105 5.50 4.50 42 N/A 30 Max 220 4 x AAA High 3.50 TT7721CP 8307T MT7 High 180 5.75 6.80 N/A 51 Low 30 TT7723CP Low 11 High 210 4.50 1 x ICR14500 High 3 2.50 4 x AG13 8705 P5R 2.60 5717 52 8313 K3 15 1.20 2 N/A 56 Low 18 (4.75 ext.) TT6103CP Low 7 (2.75 ext.) TT7701CP 4 x D Max 1500 15.75 High 5.5 3.75 1 x AAA 8737 X21R High 1250 48.00 Ni-MH Rechargeable N/A 49 8402 P2 14 1.40 6.50 N/A 59 (16.50 ext.) Low 10 (4.00 ext.) TT7721CP Low 280 TT6100CP

124 125 SPECIFICATIONS - KNIVES SPECIFICATIONS - KNIVES

MODEL BLADE HANDLE WEIGHT OVERALL LOCK BLADE HANDLE SHEATH LANYARD PAGE MODEL BLADE HANDLE WEIGHT OVERALL LOCK BLADE HANDLE SHEATH LANYARD PAGE NUMBER SIZE (IN.) SIZE (IN.) (OZ.) SIZE (IN.) SYSTEM MATERIAL MATERIAL TYPE HOLE # NUMBER SIZE (IN.) SIZE (IN.) (OZ.) SIZE (IN.) SYSTEM MATERIAL MATERIAL TYPE HOLE #

titanium coated 440C C008 3.00 4.00 1.00 7.00 liner lock 440C stainless steel rubberized N/A yes 73 C12 3.25 4.50 5.20 7.75 liner lock incised design N/A no 85 stainless steel

brushed aluminum anodized C02 3.00 4.25 4.80 7.25 liner lock D1.4 cutlery steel N/A yes 84 C13 2.75 4.00 2.80 6.75 liner lock 440C stainless steel N/A no 96 w/Kraton® inlay aluminum

titanium coated 440C 440 stainless steel titanium coated 440C C03B 3.00 4.25 3.20 7.25 button lock N/A yes 89 C19 3.25 4.13 3.00 7.38 liner lock steel handle liners N/A yes 90 stainless steel w/Kraton® inlay stainless steel

brushed aluminum C04 3.50 4.75 5.60 8.25 liner lock D1.4 cutlery steel N/A yes 91 C20136PL 2.50 3.50 3.00 6.00 liner lock 440C stainless steel aluminum N/A yes 81 w/Kraton® inlay

brushed aluminum titanium coated 440C C05 3.00 4.25 3.60 7.25 button lock 440C stainless steel N/A yes 85 C20136MB 2.50 3.50 3.00 6.00 liner lock aluminum N/A yes 87 w/Kraton® inlay stainless steel

titanium coated 440C titanium coated 440C C07 2.75 4.25 3.20 7.00 liner lock powder coated N/A yes 84 C20146 2.50 3.25 1.60 5.75 lockback rubberized coating N/A yes 90 stainless steel stainless steel

titanium coated 440C 440C satin finished C07B 2.75 4.25 3.20 7.00 liner lock powder coated N/A yes 89 C2040-4 3.00 3.75 3.00 6.75 lockback rubber inlaid nylon belt yes 94 stainless steel stainless steel

titanium coated 440C 440C satin finished C08 3.00 4.25 2.60 7.25 liner lock graphite N/A yes 91 C2040-5 3.50 3.75 3.60 7.25 lockback rubber inlaid nylon belt yes 94 stainless steel stainless steel

titanium coated 440C C09 2.50 3.75 2.80 6.25 liner lock 440C stainless steel aluminum N/A yes 96 C21 2.00 2.50 1.00 4.38 liner lock stainless steel N/A yes 85 stainless steel

textured titanium coated 440C brushed stainless steel C10 2.00 3.00 1.00 5.00 liner lock 440C stainless steel N/A yes 73 C22 2.25 3.50 3.00 6.00 liner lock N/A no 83 aluminum stainless steel open frame

leather belt titanium coated 440C brushed stainless steel C102 3.00 3.75 3.00 6.75 lockback 440C stainless steel rosewood yes 70 C22B 2.25 3.50 3.00 6.00 liner lock N/A yes 89 sheath stainless steel open frame

leather belt titanium coated 440C brushed stainless steel C103 3.50 4.50 3.80 8.00 lockback 440C stainless steel rosewood yes 70 C22SG 2.25 3.50 3.00 6.00 liner lock N/A yes 96 sheath stainless steel open frame

titanium coated 440C wood handle C1104 4.00 4.88 5.20 8.88 liner lock N/A yes 75 C36 3.00 3.50 1.50 6.50 liner lock 440C stainless steel rubberized N/A yes 73 stainless steel scales

126 127 SPECIFICATIONS - KNIVES SPECIFICATIONS - KNIVES

MODEL BLADE HANDLE WEIGHT OVERALL LOCK BLADE HANDLE SHEATH LANYARD PAGE MODEL BLADE HANDLE WEIGHT OVERALL LOCK BLADE HANDLE SHEATH LANYARD PAGE NUMBER SIZE (IN.) SIZE (IN.) (OZ.) SIZE (IN.) SYSTEM MATERIAL MATERIAL TYPE HOLE # NUMBER SIZE (IN.) SIZE (IN.) (OZ.) SIZE (IN.) SYSTEM MATERIAL MATERIAL TYPE HOLE # thuya wood C244301 3.00 3.75 3.20 6.50 liner lock damascus bead blasted N/A yes 78 C50S 2.00 1.50 1.60 3.50 lockback 440C stainless steel aluminum powder N/A yes 69 stainless steel thuya wood C53B 1.00 3.00 1.20 4.00 liner lock 440C stainless steel ZytelTM N/A yes 69 C244305 3.50 4.50 5.00 8.00 liner lock damascus bead blasted N/A yes 78 stainless steel C53R 1.00 3.00 1.20 4.00 liner lock 440C stainless steel ZytelTM N/A yes 69 C244397 6.50 4.50 11.00 11.00 N/A damascus stag leather no 79

C602 4.50 4.00 4.20 8.50 N/A 440C stainless steel hardwood leather no 77 C244398 6.50 4.50 11.00 9.50 N/A damascus stag leather no 79

thuya wood C652 4.00 3.00 3.40 7.00 N/A 440C stainless steel hardwood leather yes 77 C244501TH 3.00 4.00 3.20 7.00 liner lock damascus no no 78 anodized aluminum

nickel metal bolster C7000T 2.50 3.00 1.80 5.50 lockback 440C stainless steel mirror polished N/A yes 72 2.50 C319 2.75 1.40 5.25 N/A 440C stainless steel with brass rivets and N/A no 71 1.75 Kraton® scales C7200 2.50 3.50 2.20 6.00 lockback 440C stainless steel aircraft aluminum N/A yes 72 nickel metal bolster 2.50 C329 3.50 2.40 6.00 N/A 440C stainless steel with brass rivets and N/A no 71 1.75 lightweight ® C7400 3.25 5.00 4.50 8.25 liner lock 440C stainless steel N/A yes 82 Kraton scales aluminum nylon C3300 6.00 6.00 27.80 12.00 modular 440C stainless steel ABS no 97 carry case C827SB 8.50 4.75 12.80 13.25 N/A 440C stainless steel stag leather no 76

2.50 main C3785 3.50 5.00 6.00 N/A 440C stainless steel rubberized no yes 93 C846 7.00 5.25 5.20 12.50 N/A 440C stainless steel Kraton® molded ABS yes 100 1.50 small

6.00 fillet 12.25 nickel metal bolster 3.00 C846X 5.00 boning 4.75 11.20 11.25 interchangaeble 440C stainless steel ABS nylon no 101 C339 4.00 3.00 6.75 N/A 440C stainless steel with brass rivets and N/A no 71 2.25 4.00 serrated 10.75 Kraton® scales

C849 9.00 5.25 5.80 14.50 N/A 440C stainless steel Kraton® molded ABS yes 99 C5017 1.50 2.25 .50 3.75 N/A 440C stainless steel textured aluminum N/A yes 95

C8520SB 4.00 3.50 3.80 7.50 N/A 440C stainless steel stag leather yes 76 2.50 main C5034 3.50 2.00 6.25 N/A 440C stainless steel textured aluminum N/A yes 95 1.50 small C899 7.00 7.50 2.80 13.00 lockback 440C stainless steel ABS N/A yes 100

2.50 main ABS handle with C5037 3.50 3.50 6.25 N/A 440C stainless steel textured aluminum N/A yes 95 C9150 4.75 6.25 4.20 11.00 safety button lock 440C stainless steel nylon belt yes 75 1.50 small rubberized grip

128 129 SPECIFICATIONS - KNIVES SPECIFICATIONS - MULTI-TOOLS

MODEL BLADE HANDLE WEIGHT OVERALL LOCK BLADE HANDLE SHEATH LANYARD PAGE MODEL BLADE HANDLE WEIGHT OVERALL LOCK BLADE HANDLE SHEATH LANYARD PAGE NUMBER SIZE (IN.) SIZE (IN.) (OZ.) SIZE (IN.) SYSTEM MATERIAL MATERIAL TYPE HOLE # NUMBER SIZE (IN.) SIZE (IN.) (OZ.) SIZE (IN.) SYSTEM MATERIAL MATERIAL TYPE HOLE #

C927 8.50 4.50 17.20 14.00 N/A 440C stainless steel hardwood leather yes 77 C2795 2.00 2.75 2.00 4.50 N/A 440C stainless steel aluminum/plastic N/A no 115

C2899 2.25 3.00 4.40 4.50 N/A 440C stainless steel stainless/rubber no no 110 C9550 5.00 4.00 3.00 9.00 N/A 440C stainless steel N/A nylon belt no 104

C2899B 2.25 3.00 4.40 4.50 N/A 440C stainless steel stainless/rubber no yes 113 CG002 2.00 2.50 1.00 4.50 lockback 440C stainless steel textured ZytelTM N/A yes 97

C2899SG 2.25 3.00 4.40 4.50 N/A 440C stainless steel stainless/rubber no yes 116 titanium CG002BH 2.00 2.50 1.00 4.50 lockback textured ZytelTM N/A yes 88 440C stainless steel C3700 1.75 2.25 1.60 4.00 N/A 440C stainless steel bead blasted N/A yes 111

CG002PL 2.00 2.50 1.00 4.50 lockback 440C stainless steel textured ZytelTM N/A yes 81 C3900 2.50 3.25 3.20 6.00 N/A 440C stainless steel bead blasted N/A yes 111

TM CG004 2.75 4.00 1.80 6.75 lockback 440C stainless steel textured Zytel N/A yes 97 C5089 2.50 3.50 5.00 6.00 N/A 440C stainless steel rubberized nylon belt yes 111

titanium CG004BH 2.75 4.00 1.80 6.75 lockback textured ZytelTM N/A yes 88 C5799 2.00 4.00 11.80 6.00 N/A 440C stainless steel stainless/rubber molded EVA no 110 440C stainless steel

C5799B 2.00 4.00 11.80 6.00 N/A 440C stainless steel stainless/rubber molded EVA no 113 CG004PL 2.75 4.00 1.80 6.75 lockback 440C stainless steel textured ZytelTM N/A yes 83

C5799SG 2.00 4.00 11.80 6.00 N/A 440C stainless steel stainless/rubber molded EVA no 117 CG006 3.00 4.00 2.20 7.00 lockback 440C stainless steel textured ZytelTM N/A yes 88

C5899 3.25 4.13 9.80 7.25 liner lock 440C stainless steel stainless/rubber molded EVA no 109 CG1204 2.00 2.50 0.60 4.50 lockback 440C stainless steel ZytelTM N/A yes 69 titanium coated 400C C6100 2.75 4.00 4.25 6.75 liner lock brushed steel N/A no 115 stainless steel

® CSH-50 5.00 4.50 6.40 9.50 N/A 440C stainless steel Kraton molded nylon no 76 titanium coated 400C FT2401 N/A N/A 3.20 5.00 N/A ABS molded EVA yes 120 stainless steel 440 stainless steel CUS-100 6.00 5.00 7.40 11.00 N/A rubber molded Kydek® yes 86 black powder coating FT3107 N/A N/A 2.40 7.40 N/A N/A plastic / foam N/A yes 119

FT8500 3.25 4.75 13.60 8.00 N/A 440C stainless steel bead blasted/rubber nylon yes 119

titanium coated 440C FT6500 N/A N/A 6.20 7.00 N/A rubberized N/A yes 121 stainless steel

titanium coated 400C FTP8000 N/A N/A 7.60 8.75 N/A rubberized no yes 121 stainless steel

MP2875 1.50 2.75 2.60 4.50 N/A 440C stainless steel bead blasted/rubber no yes 120

130 131