Owner's Manual. Mini Countryman

Home , Airbag, Armrest, Collision (Lost), Glove compartment, Handle (computing), Lights Come On

LINK: CONTENT & A-Z

OWNER'S MANUAL. MINI COUNTRYMAN.

Online Edition for Part no. 01402723835 - VI/18 Online Edition for Part no. 01402723835 - VI/18 WELCOME TO MINI.

OWNER'S MANUAL. MINI COUNTRYMAN.

Thank you for choosing a MINI. The more familiar you are with your vehicle, the better control you will have on the road. We therefore strongly suggest: Read this Owner's Manual before starting off in your new MINI. Also use the Integrated Owner's Manual in your vehicle. It contains important information on vehicle operation that will help you make full use of the technical features available in your MINI. The manual also contains information designed to enhance operating reliability and road safety, and to contribute to maintaining the value of your MINI. Any updates made after the editorial deadline can be found in the appendix of the printed Owner's Manual for the vehicle. Get started now. We wish you driving fun and inspiration with your MINI.

3 Online Edition for Part no. 01402723835 - VI/18 TABLE OF CONTENTS

NOTES Information...... 8

QUICK REFERENCE Your MINI at a glance...... 20

AT A GLANCE Cockpit...... 38 Central Information Display (CID)...... 42 Voice activation system...... 51 General settings...... 54 Owner's Manual media...... 66

CONTROLS Opening and closing...... 70 Seats, mirrors, and steering wheel...... 94 Transporting children safely...... 107 Driving...... 112 Displays...... 137 Lights...... 157 Safety...... 163 Driving stability control systems...... 184 Driving comfort...... 189 Climate control...... 209 Interior equipment...... 218 Storage compartments...... 225 Cargo area...... 228

4 Online Edition for Part no. 01402723835 - VI/18 Navigation, Entertainment and Communication can be called up via the Integrated Owner's Manual in the vehicle.

DRIVING TIPS Things to remember when driving...... 238 Saving fuel...... 243

MOBILITY Refueling...... 252 Fuel...... 254 Wheels and tires...... 256 Engine compartment...... 276 Engine oil...... 279 Coolant...... 283 Maintenance...... 285 Replacing components...... 287 Breakdown assistance...... 298 Care...... 306

REFERENCE Technical data...... 314 Appendix...... 317 Everything from A to Z...... 318

© 2018 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English ID5 VI/18, 07 18 490 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.

5 Online Edition for Part no. 01402723835 - VI/18

6 Online Edition for Part no. 01402723835 - VI/18 NOTES

Information ...... 8

7 Online Edition for Part no. 01402723835 - VI/18 Seite 8

NOTES Information

Information

Using this Owner's Manual are available on the Internet: www.mini- usa.com. Orientation Integrated Owner's Manual in the The fastest way to find information on a vehicle particular topic is by using the index. The Integrated Owner's Manual specifically An initial overview of the vehicle is pro- describes features and functions found in vided in the first chapter. the vehicle. The Integrated Owner's Manual can be displayed on the Control Display. Ad- Updates made after the editorial ditional information, refer to page 66. deadline Due to updates after the editorial deadline, MINI Motorer’s Guide app differences may exist between the printed The app specifically describes features and Owner's Manual and the Integrated Owner's functions found in the vehicle. The app can Manual in the vehicle. be displayed on smartphones and tablets. Notes on updates can be found in the appendix of the printed Owner's Manual for MINI Driver’s Guide Web the vehicle. Driver’s Guide Web shows the most suitable information for the selected vehicle. If Owner's Manual for Navigation, possible, only equipment and functions that Entertainment, Communication are actually installed in the vehicle will be The Owner's Manual for Navigation, Enter- explained. Driver’s Guide Web can be dis- tainment, and Communication can be ob- played in any current browser. tained as printed book from the service center. The topics are also discussed in the Symbols and displays Integrated Owner's Manual in the vehicle. Symbols in the Owner's Manual Additional sources of informa- Symbol Meaning tion Precautions that must be followed in order to avoid the Dealer’s service center possibility of injury to yourself and to others as well as serious A dealer’s service center will be glad to an- damage to the vehicle. swer questions at any time. Measures that can be taken to Internet help protect the environment. The Owner's Manual and general Informa- tion about MINI, for example on technology,

8 Online Edition for Part no. 01402723835 - VI/18 Seite 9

Information NOTES

Symbol Meaning This also applies to safety-related functions and systems. "..." Control Display texts used to When using these functions and systems, select individual functions. the applicable laws and regulations must be ›...‹ Verbal instructions to use with observed. the voice activation system.. For any options and equipment not descri- ››...‹‹ Responses generated by the bed in this Owner's Manual, refer to the voice activation system. Supplementary Owner's Manuals. Your dealer’s service center is happy to an- Action steps swer any questions that you may have about the features and options applicable to Action steps to be carried out are presented your vehicle. as numbered list. The steps must be carried out in the defined order. 1. First action step. Status of the Owner's Manual 2. Second action step. Basic information Enumerations The manufacturer of your vehicle pursues a Enumerations without mandatory order or policy of constant development that is con- alternative possibilities are presented as list ceived to ensure that our vehicles continue with bullet points. to embody the highest quality and safety standards. In rare cases, therefore, the fea- – First possibility. tures described in this Owner's Manual may – Second possibility. differ from those in your vehicle. Symbols on vehicle components Updates made after the editorial This symbol on a vehicle component deadline indicates that further information on the Due to updates after the editorial deadline, component is available in the Owner's differences may exist between the printed Manual. Owner's Manual and the Integrated Owner's Manual in the vehicle. Notes on updates can be found in the ap- Vehicle features and options pendix of the printed Owner's Manual for the vehicle. This Owner's Manual describes all models and all standard, country-specific and optional equipment that is offered in the For Your Own Safety model series. Therefore, this Owner's Manual also describes and illustrates features and functions that are not available in Manufacturer a vehicle, for example because of the se- The manufacturer of this MINI is Bayeri- lected optional features or the country-spe- sche Motoren Werke Aktionengesellschaft, cific version. BMW AG.

9 Online Edition for Part no. 01402723835 - VI/18 Seite 10

NOTES Information

Intended use tronics, requires suitable maintenance and Follow the following when using the vehi- repair work. cle: The manufacturer of your vehicle recom- – Owner's Manual. mends that you entrust corresponding procedures to a MINI dealer’s service center. If – Information on the vehicle. Do not re- you choose to use another service facility, move stickers. the manufacturer of your vehicle recom- – Technical vehicle data. mends use of a facility that performs work, – The traffic, speed, and safety laws where for instance maintenance and repair, ac- the vehicle is driven. cording to MINI specifications with properly trained personnel, referred to in this – Vehicle documents and statutory docu- Owner's Manual as "another qualified serv- ments. ice center or repair shop". Warranty If work is performed improperly, for instance maintenance and repair, there is a Your vehicle is technically configured for risk of subsequent damage and related the operating conditions and registration safety risks. requirements applying in the country of first delivery, also known as homologation. Parts and accessories If your vehicle is to be operated in a different country it might be necessary to adapt The manufacturer of your vehicle recom- your vehicle to potentially differing operat- mends the use of parts and accessory prod- ing conditions and registration require- ucts approved by the manufacturer of the ments. If your vehicle does not comply with MINI. the homologation requirements in a certain Approved parts and accessories, and advice country you may not be able to lodge war- on their use and installation are available ranty claims for your vehicle there. Further from a MINI dealer's service center. information on warranty is available from a MINI parts and accessories were tested by dealer’s service center. the manufacturer of the MINI for their safety and suitability in MINI vehicles. Maintenance and repairs The manufacturer of your vehicle warrants genuine MINI parts and accessories. WARNING The manufacturer of your vehicle does not Improperly performed work on the vehicle evaluate whether each individual product paint can lead to a failure or malfunction from another manufacturer can be used of the radar sensors and thereby result in a with MINI vehicles without presenting a safety risk. There is a risk of accidents or safety hazard, even if a country-specific of- risk of damage to property. Have paint- ficial approval was issued. The manufac- work or paintwork repairs on bumpers of turer of your vehicle does not evaluate vehicles with radar sensors performed by a whether these products are suitable for dealer’s service center or another qualified MINI vehicles under all usage conditions. service center or repair shop only. California Proposition 65 Warning Advanced technology, e. g. the use of mod- California law requires vehicle manufactur- ern materials and high-performance elec- ers provide the following warning:

10 Online Edition for Part no. 01402723835 - VI/18 Seite 11

Information NOTES

Service and warranty WARNING We recommend that you read this publica- Engine exhaust and a wide variety of Au- tion thoroughly. Your vehicle is covered by tomobile components and parts, including the following warranties: components found in the interior furnish- – New Vehicle Limited Warranty. ings in a vehicle, contain or emit chemicals known to the State of California to – Rust Perforation Limited Warranty. cause cancer and birth defects and repro- – Federal Emissions System Defect War- ductive harm. In addition, certain fluids ranty. contained in vehicles and certain products – Federal Emissions Performance War- of component wear contain or emit chemi- ranty. cals known to the State of California to – California Emission Control System Lim- cause cancer and birth defects or other re- ited Warranty. productive harm. Battery posts, terminals and related accessories contain lead and Detailed information about these warranties lead compounds. Batteries also contain is listed in the Service and Warranty Infor- other chemicals known to the State of Cali- mation Booklet for US models or in the War- fornia to cause cancer. Wash your hands ranty and Service Guide Booklet for Cana- after handling. Used engine oil contains dian models. chemicals that have caused cancer in labo- Your vehicle has been specifically adapted ratory animals. Always protect your skin and designed to meet the particular operat- by washing thoroughly with soap and wa- ing conditions and homologation require- ter. For more information go to ments in your country and continental re- www.P65Warnings.ca.gov/passenger-ve- gion in order to deliver the full driving hicle. pleasure while the vehicle is operated under those conditions. If you wish to operate your vehicle in another country or region, WARNING you may be required to adapt your vehicle to meet different prevailing operating con- Operating, servicing and maintaining a ditions and homologation requirements. passenger vehicle or off-highway motor You should also be aware of any applicable vehicle can expose you to chemicals in- warranty limitations or exclusions for such cluding engine exhaust, carbon monoxide, country or region. In such case, please con- phthalates, and lead, which are known to tact Customer Relations for further informa- the State of California to cause cancer and tion. birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as Maintenance necessary, service your vehicle in a well- Maintain the vehicle regularly to sustain ventilated area and wear gloves or wash the road safety, operational reliability and your hands frequently when servicing the New Vehicle Limited Warranty. your vehicle. For more information go to Specifications for required maintenance www.P65Warnings.ca.gov/passenger-ve- measures: hicle. – MINI Maintenance system.

11 Online Edition for Part no. 01402723835 - VI/18 Seite 12

NOTES Information

– Service and Warranty Information Book- – Status messages for the vehicle and its let for US models. individual components, e.g., wheel rota- – Warranty and Service Guide Booklet for tional speed, wheel speed, deceleration, Canadian models. transverse acceleration, engaged safety belt indicator. If the vehicle is not maintained according to these specifications, this could result in se- – Ambient conditions, e.g., temperature, rious damage to the vehicle. Such damage is rain sensor signals. not covered by the MINI New Vehicle Lim- The processed data is only processed in the ited Warranty. vehicle itself and generally volatile. The data is not stored beyond the operating period. Data memory Electronic components, e.g. control units and ignition keys, contain components for General information storing technical information. Information about the vehicle condition, component us- Electronic control devices are installed in age, maintenance requirements or faults the vehicle. Electronic control units process can be stored temporarily or permanently. data they receive from vehicle sensors, self- generate or exchange with each other. Some This information generally records the state control units are necessary for the vehicle of a component, a module, a system, or the to function safely or provide assistance dur- environment, for instance: ing driving, for instance driver assistance – Operating states of system components, systems. Furthermore, control devices facil- e.g., fill levels, tire inflation pressure, itate comfort or infotainment functions. battery status. Information about stored or exchanged data – Malfunctions and faults in important can be requested from the manufacturer of system components, for instance lights the vehicle, in a separate booklet, for exam- and brakes. ple. – Responses by the vehicle to special situations such as airbag deployment or Personal reference engagement of the driving stability con- Each vehicle is marked with a unique vehi- trol systems. cle identification number. Depending on the – Information on vehicle-damaging country, the vehicle owner can be identified events. with the vehicle identification number, li- The data is required to perform the control cense plate and corresponding authorities. device functions. Furthermore, it also In addition, there are other options to track serves to recognize and correct malfunc- data collected in the vehicle to the driver or tions, and helps the vehicle manufacturer to vehicle owner, e.g. via utilized services. optimize vehicle functions. The majority of this data is transient and is Operating data in the vehicle only processed within the vehicle itself. Control units process data to operate the ve- Only a small share of the data is stored hicle. event-related in event or fault memories. For example, this includes: When servicing, for instance during repairs, service processes, warranty cases, and qual-

12 Online Edition for Part no. 01402723835 - VI/18 Seite 13

Information NOTES

ity assurance measures, this technical infor- This includes the following depending on mation can be read out from the vehicle to- the respective equipment: gether with the vehicle identification – Multimedia data such as music, films or number. photos for playback in an integrated A dealer’s service center or another quali- multimedia system. fied service center or repair shop can read – Address book data for use in conjunc- out the information. The socket for OBD On- tion with an integrated hands-free sys- board Diagnosis required by law in the ve- tem or an integrated navigation system. hicle is used to read out the data. – Entered navigation destinations. The data is collected, processed, and used by the relevant organizations in the service – Data on the use of Internet services. network. The data documents technical con- This data can be stored locally in the vehicle ditions of the vehicle, helps with the identi- or is found on a device that has been con- fication of the fault, compliance with war- nected to the vehicle, e.g., a smartphone, ranty obligations and quality improvement. USB stick or MP3 player. If this data is Furthermore, the manufacturer has product stored in the vehicle, it can be deleted at monitoring duties to meet in line with prod- any time. uct liability law. To fulfill these duties, the This data is only transmitted to third parties vehicle manufacturer needs technical data upon personal request as part of the use of from the vehicle. The data from the vehicle online services. This depends on the se- can also be used to check customer claims lected settings for the use of the services. for warranty and guaranty. Fault and event memories in the vehicle can Incorporation of mobile end devices be reset when a dealer’s service center or Depending on the vehicle equipment, mo- another qualified service center or repair bile devices connected to the vehicle, for in- shop performs repair or servicing work. stance smartphones, can be controlled via the vehicle control elements. Data entry and data transfer into The sound and picture from the mobile de- the vehicle vice can be played back and displayed through the multimedia system. Certain in- General information formation is transferred to the mobile device at the same time. Depending on the Depending on the vehicle equipment, com- type of incorporation, this includes, for in- fort and individual settings can be stored in stance position data and other general vehi- the vehicle and modified or reset at any cle information. This optimizes the way in time. which selected apps, for instance navigation For example, this includes: or music playback, work. – Settings for the seat and steering wheel There is no further interaction between the positions. mobile device and the vehicle, for instance – Suspension and climate control settings. active access to vehicle data. If necessary, data can be transferred to the How the data will be processed further is entertainment and communication system determined by the provider of the particular of the vehicle, e.g. via smartphone. app being used. The extent of the possible

13 Online Edition for Part no. 01402723835 - VI/18 Seite 14

NOTES Information

settings depends on the respective app and of the relevant provider and subject to their the operating system of the mobile device. data privacy conditions and terms of use. The vehicle manufacturer has no influence Services on the content exchanged during this process. Information on the way in which per- General information sonal data is collected and used in relation to services from third parties, the scope of If the vehicle has a wireless network con- such data, and its purpose, can be obtained nection, this enables data to be exchanged from the relevant service provider. between the vehicle and other systems. The wireless network connection is realized via an in-vehicle transmitter and receiver unit or via personal mobile devices brought into Event Data Recorder EDR the vehicle, for instance smartphones. This wireless network connection enables 'online This vehicle is equipped with an event data functions' to be used. These include online recorder EDR. The main purpose of an EDR services and apps supplied by the vehicle is to record, in certain crash or near crash- manufacturer or by other providers. like situations, such as an air bag deployment or hitting a road obstacle, data that Services from the vehicle will assist in understanding how a vehicle’s manufacturer systems performed. The EDR is designed to record data related to vehicle dynamics and Where online services from the vehicle safety systems for a short period of time, manufacturer are concerned, the corre- typically 30 seconds or less. sponding functions are described in the appropriate place, for instance the Owner's The EDR in this vehicle is designed to re- Manual or manufacturer's website. The rele- cord such data as: vant legal information pertaining to data – How various systems in your vehicle protection is provided there too. Personal were operating. data may be used to perform online serv- – Whether or not the driver and passen- ices. Data is exchanged over a secure con- ger safety belts were fastened. nection, for instance with the IT systems of the vehicle manufacturer intended for this – How far, if at all, the driver was depress- purpose. ing the accelerator and/or brake pedal. Any collection, processing, and use of per- – How fast the vehicle was traveling. sonal data above and beyond that needed to This data can help provide a better under- provide the services must always be based standing of the circumstances in which on a legal permission, contractual arrange- crashes and injuries occur. ment or consent. It is also possible to acti- EDR data is recorded by your vehicle only if vate or deactivate the data connection as a a nontrivial crash situation occurs; no data whole. That is, with the exception of func- is recorded by the EDR under normal driv- tions and services required by law such as ing conditions and no personal data, for in- Assist systems. stance name, gender, age, and crash location, are recorded. Services from other providers However, other parties, such as law enforce- When using online services from other pro- ment, could combine the EDR data with the viders, these services are the responsibility

14 Online Edition for Part no. 01402723835 - VI/18 Seite 15

Information NOTES

type of personally identifying data routinely Windshield acquired during a crash investigation. To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.

Vehicle identification number The vehicle identification number can also be found behind the windshield. Engine compartment Reporting safety defects

For US customers The following only applies to vehicles owned and operated in the US. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately in- The vehicle identification number can be form the National Highway Traffic Safety found in the engine compartment, on the Administration NHTSA, in addition to noti- right-hand side of the vehicle. fying MINI of North America, LLC, P.O. Box 1227, Westwood, New Jersey 07675-1227, Telephone 1-800-831-1117. Type label If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or MINI of North America, LLC. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 The vehicle identification number can be (TTY: 1-800-424-9153); go to http:// found on the type label, on the right-hand www.safercar.gov; or write to: Administra- side of the vehicle. tor, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain

15 Online Edition for Part no. 01402723835 - VI/18 Seite 16

NOTES Information

other information about motor vehicle safety from http://www.safercar.gov For Canadian customers Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may call the toll-free hotline 1-800-333-0510. You can also obtain other information about motor vehicle safety from http://www.tc.gc.ca/ roadsafety.

16 Online Edition for Part no. 01402723835 - VI/18 Seite 17

Information NOTES

17 Online Edition for Part no. 01402723835 - VI/18

18 Online Edition for Part no. 01402723835 - VI/18 QUICK REFERENCE

Your MINI at a glance ...... 20

19 Online Edition for Part no. 01402723835 - VI/18 Seite 20

QUICK REFERENCE Your MINI at a glance

Your MINI at a glance

Opening and closing Locking the vehicle Press button on the remote control. Buttons on the remote control All vehicle access points are locked. Buttons for the central locking system

Overview

1 Unlocking 2 Locking 3 Unlocking the tailgate With automatic tailgate operation: open the tailgate 4 Panic mode Buttons for the central locking system.

Unlocking the vehicle Locking Press button on the remote control. Pressing the button locks the vehicle if the front doors are closed. Depending on the settings, either only the driver's door or all vehicle access points are unlocked. Unlocking If only the driver's door is unlocked, press Pressing the button unlocks the ve- the button of the remote control again to hicle. unlock the other vehicle access points. Press and hold this button on the Panic mode remote control after unlocking. You can trigger the alarm system if you find yourself in a dangerous situation. The windows and the glass sunroof are opened, as long as the button on the remote Press button on the remote control control is pressed. and hold for at least 3 seconds. To switch off the alarm: press any button.

20 Online Edition for Part no. 01402723835 - VI/18 Seite 21

Your MINI at a glance QUICK REFERENCE

Comfort Access Opening and closing the tailgate with no-touch activation Concept The vehicle can be accessed without acti- Concept vating the remote control. The tailgate can be opened and closed with All you need to do is to have the remote no-touch activation using the remote con- control with you, such as in your pants trol you are carrying. pocket. Performing the foot movement The vehicle automatically detects the remote control when it is in close proximity 1. Stand in the middle behind the vehicle or in the car's interior. at approx. one arm's length away from the rear of the vehicle. Unlocking the vehicle 2. Wave a foot under the vehicle in the direction of travel and immediately pull it back.

On the driver's or front passenger's door handle, press the button. Tailgate Locking the vehicle Opening

On the driver's or front passenger's door handle, press the button. Unlock the vehicle and press the button on the tailgate. – Unlock the vehicle and press the button on the tailgate.

21 Online Edition for Part no. 01402723835 - VI/18 Seite 22

QUICK REFERENCE Your MINI at a glance

– If carrying the remote control, press the Seats, mirrors, and steering button on the tailgate. wheel – Press and hold button on the remote control for approx. 1 sec- Manually adjustable seats ond. Depending on the setting, the doors may also be unlocked.

Closing

1 Forward/backward 2 Thigh support 3 Height 4 Backrest tilt Press button on the inside of the tailgate. Electrically adjustable seats

– Press button, arrow 1, on the inside of the tailgate. 1 Memory function – Press button, arrow 2. 2 Lumbar support The vehicle will be locked after closing 3 Backrest tilt the tailgate. The driver's door must be 4 Forward/backward, height, seat tilt closed for this purpose and the remote control must be outside of the vehicle in the area of the tailgate.

22 Online Edition for Part no. 01402723835 - VI/18 Seite 23

Your MINI at a glance QUICK REFERENCE

Adjusting the head restraint Adjusting the steering wheel

Height In four directions

– To raise: push the head restraint up. 1. Fold the lever down. – To lower: press the button, arrow 1, and 2. Move the steering wheel to the prefer- push the head restraint down. red height and angle to suit your seating position. Adjusting the exterior mirrors 3. Fold the lever back up. Memory function

Concept The following settings can be stored and, if necessary, retrieved using the memory function: – Seat position. – Exterior mirror position. 1 Settings – Height of the Head-up Display. 2 Selecting a mirror, Automatic Curb Mon- itor Storing 3 Folding in and out 1. Switch on the ignition. 2. Set the desired position.

3. Press button. The LED in the button lights up. 4. Press the desired button 1 or 2 on the seat while the LED is illuminated. The LED goes out.

Calling up settings The stored position is called up automatically.

23 Online Edition for Part no. 01402723835 - VI/18 Seite 24

QUICK REFERENCE Your MINI at a glance

Press selected button 1 or 2. Driver's door The procedure stops when a switch for setting the seat or one of the memory buttons is pressed. While driving, the seat position adjustment on the driver's side is interrupted after a short time.

Displays and control elements 1 Safety switch In the vicinity of the steering 2 Power windows wheel 3 Exterior mirrors

All around the selector lever

1 Low beams, fog lights 2 High beams, headlight flasher, turn signal 1 Selector lever 3 Instrument cluster 2 Controller with buttons 4 Washer/wiper system 3 Parking brake Indicator/warning lights Central Information Display (CID) Instrument cluster Concept The indicator/warning lights can light up in a variety of combinations and colors. The Central Information Display (CID) combines the functions of a multitude of Several of the lights are checked for proper switches. These functions can be operated functioning and light up temporarily when via the Controller or touchscreen. the engine is started or the ignition is switched on.

24 Online Edition for Part no. 01402723835 - VI/18 Seite 25

Your MINI at a glance QUICK REFERENCE

Controller If no other commands are available, operate the function via the Central Information General information Display (CID). The buttons can be used to open the menus directly. The Controller can be used to se- Terminating the voice activation system lect menu items and enter the settings. Press the button on the steering wheel or ›Cancel‹. Buttons on the Controller

Button Function Help on the voice activation system – To have information on the operating Press once: call up main menu. principle of the voice activation system Press twice: open recently used read out loud: ›General information on menus. voice control‹. Open the Communication menu. – To have help for the current menu read out loud: ›Help‹.

Open the Media/Radio menu. Information on Emergency Requests Do not use the voice activation system to Open destination input menu for initiate an Emergency Request. In stressful navigation. situations, the voice and vocal pitch can Open navigation map. change. This can unnecessarily delay the es- tablishment of a phone connection. Open the previous display. Instead, use the SOS button close to the interior mirror. Open the Options menu. Driving Voice activation Starting and stopping the engine Using the voice activation system Ignition on/off Activating the voice activation system – On: press the Start/Stop button. 1. Press the button on the steering Most of the indicator/ wheel. warning lights light up for 2. Wait for the signal. a varied length of time. 3. Say the command. – Off: press the Start/Stop button again. This symbol in the instrument cluster All indicator lights go out. indicates that the voice activation system is – Radio-ready state: when the ignition is active. switched off, press the ON/OFF button on the radio or when the engine is running, press the Start/Stop button.

25 Online Edition for Part no. 01402723835 - VI/18 Seite 26

QUICK REFERENCE Your MINI at a glance

Some electronic systems/power con- Parking brake sumers remain ready for operation. Setting Starting/stopping the engine Pull the switch. The LED and indicator light light up. Steptronic transmission: starting 1. Depress the brake pedal. Releasing 2. Engage selector lever position P or N. Manual transmission: press the switch 3. Press the Start/Stop button. while the brake pedal is pressed. Steptronic transmission: press the switch Manual transmission: starting while the brake is pressed or selector lever position P is set. 1. Depress the brake pedal. The LED and indicator light go out. 2. Press on the clutch pedal and shift to neutral. The parking brake is released. 3. Press the Start/Stop button. Manual transmission Steptronic transmission: switching off Shifting 1. When the vehicle is stationary, apply the parking brake. When shifting into 5th or 6th gear, push the gearshift lever to the right in order to 2. Engage selector lever position P. prevent inadvertent shifting into the 3rd or 3. Press the Start/Stop button. 4th gear.

Manual transmission: switching off Reverse gear 1. With the vehicle at a standstill, press Select only when the vehicle is stationary. the Start/Stop button. To overcome the resistance push the gear- 2. Shift into first gear or reverse. shift lever dynamically to the left and engage reverse gear with a forward shifting 3. Set the parking brake. movement. Auto Start/Stop function Steptronic transmission Steptronic transmission: switches the engine off automatically while stationary to Selector lever positions save fuel. The engine starts automatically when the brake pedal is released. Parking position P. Manual transmission: switches the engine Reverse R. off automatically while stationary to save Neutral N. fuel. As soon as the clutch pedal is de- Drive mode D. pressed, the engine starts automatically. Engage selector lever position P or R only when the vehicle is stationary. To prevent the vehicle from creeping after you select a drive mode or reverse, maintain

26 Online Edition for Part no. 01402723835 - VI/18 Seite 27

Your MINI at a glance QUICK REFERENCE

pressure on the brake pedal until you are High beams, headlight flasher, turn ready to start. signal, roadside parking light

Selector lever lock High beams, headlight flasher A lock prevents an inadvertent change from selector lever position P to another selector lever position and, depending on the transmission version, inadvertent switching to selector lever position P or R. To release the lock: with the brake pedal depressed, press the button on the front or side of the selector lever. Steptronic transmission, Sport and manual mode Push the lever forward or pull it backward. – High beams on, arrow 1. The high beams light up when the low beams are switched on. – High beams off/headlight flasher, arrow 2.

Turn signal

Sport program: Press the selector lever to the left out of selector lever position D. Manual mode: – To shift down: press the selector lever forward. – To shift up: pull the selector lever rear- wards. – On: press the lever past the resistance point. – Off: lightly tap the lever to the resistance point. – Off: press the lever past the resistance point in the opposite direction. – Triple turn signal activation: lightly tap the lever up or down. – Brief signaling: press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.

27 Online Edition for Part no. 01402723835 - VI/18 Seite 28

QUICK REFERENCE Your MINI at a glance

Canada: roadside parking light Washer/wiper system

Switching the wipers on/off and brief wipe

Switching on

Illuminate the vehicle on one side. – On: with the ignition switched off, press the lever either up or down past the resistance point for approx. 2 seconds. – Off: briefly press the lever to the resistance point in the opposite direction. Press the lever up until the desired position is reached. – Resting position of the wipers: posi- Lights and lighting tion 0. Light functions – Rain sensor: position 1. – Normal wiper speed: position 2. Symbol Function – Fast wiper speed: position 3. Front fog lights. Brief wipe and switching off

Automatic headlight control.

Lights off. Daytime running lights. Parking lights.

Low beams. Press the lever down. – Switching off: press the lever down until it reaches its standard position. Instrument lighting. – Brief wipe: press the lever down from the standard position.

28 Online Edition for Part no. 01402723835 - VI/18 Seite 29

Your MINI at a glance QUICK REFERENCE

Rain sensor Canada: wiper system

Activating/deactivating Switching the wipers on/off and brief wipe

Switching on

To activate: press the lever up once from its standard position, arrow 1. To deactivate: press the lever back into the standard position. Tap up the lever or press it past the resistance point. Set interval or sensitivity of the rain – Normal wiper speed: tap up once. sensor – Fast wiper speed: tap up twice or tap once beyond the resistance point.

Brief wipe and switching off

Turn the thumbwheel on the wiper lever.

Cleaning the windshield Press the lever down. – To switch off fast wipe: press down twice. – To switch off normal wipe: press down once. – Brief wipe: press down once.

Pull the lever.

29 Online Edition for Part no. 01402723835 - VI/18 Seite 30

QUICK REFERENCE Your MINI at a glance

Rain sensor Climate control Activating/deactivating Air conditioner

Button Function Temperature.

Air conditioning. Press the button on the wiper lever. Recirculated-air mode. Set interval or sensitivity of the rain sensor Control the air flow, manual.

Control the manual air distribution.

Turn the thumbwheel on the wiper lever. Windshield defroster.

Cleaning the windshield Automatic climate control

Button Function Temperature.

Air conditioning. Pull the lever. Maximum cooling.

AUTO program.

30 Online Edition for Part no. 01402723835 - VI/18 Seite 31

Your MINI at a glance QUICK REFERENCE

Button Function 4 Change station/track Recirculated-air mode. 5 Programmable memory buttons

Automatic recirculated-air Navigation destination entry control AUC/recirculated- air mode. Entering a destination via address Control the air flow, manual. State/province 1. "Navigation" 2. "Enter address" 3. "State/Province?" Air distribution, manual. 4. Move the Controller to the right to select the state from the list. Defrost and defog the windows. Entering the address Windshield defroster. The address can be entered in any order. Example: entering the address via the town/ Rear window defroster. city 1. "City/Postal code?" 2. Enter the town/city. Infotainment The list is narrowed down further with each entry. Radio 3. Select the symbol. 4. Select a town/city from the list. Control elements 5. If necessary, enter the street. 6. Select the street as you would the town/ city. 7. If necessary, enter a house number. 8. Select the symbol. 9. Select a house number or range of house numbers from the list.

Starting destination guidance 1 Change waveband "Start guidance" 2 Changing the entertainment source If only the town/city was entered: destina- 3 Sound output on/off, volume tion guidance is started to the town/city center.

31 Online Edition for Part no. 01402723835 - VI/18 Seite 32

QUICK REFERENCE Your MINI at a glance

Pairing the mobile phone Using the phone After the mobile phone is paired once with the vehicle, the mobile phone can be oper- Accepting a call ated using the Central Information Display Incoming call can be accepted via the Cen- (CID), the steering wheel buttons and spo- tral Information Display (CID) or the button ken instructions. on the steering wheel. 1. "My MINI" Via the Central Information Display (CID) 2. "System settings" "Accept" 3. "Mobile devices" 4. "Connect new device" Via the button on the steering wheel The Bluetooth name of the vehicle is Press button. displayed on the Control Display. Via the instrument cluster 5. Select the functions for which the mobile phone is to be used. Use the OK button on the steering wheel to select: "Accept" 6. To perform additional steps on the mobile phone, refer to the mobile phone Dialing a number owner's manual: e.g., search for or connect the Bluetooth device or a new de- 1. "Communication" vice. 2. "Dial number" The Bluetooth name of the vehicle ap- 3. Select the numbers individually. pears on the mobile phone display. Se- lect the Bluetooth name of the vehicle. 4. Select the symbol. 7. Depending on the mobile device, a con- If connection is to be set up via the addi- trol number is displayed or the control tional phone: number must be entered. 1. Press button. – Compare the control number displayed on the Control Display with the control number on the display of the device. 2. "Call via" Confirm the control number on the device and on the Control Display. Apple CarPlay preparation – Enter and confirm the same control Concept number on the device and via the Central Information Display (CID). CarPlay allows certain functions of a compatible Apple iPhone to be used via Siri The device is connected and displayed voice operation and the Central Information in the device list. Display (CID). The mobile phone is connected and will appear at the top of the list of mobile phones. Functional requirements – Compatible iPhone. iPhone 5 or later with iOS 7.1 or later.

32 Online Edition for Part no. 01402723835 - VI/18 Seite 33

Your MINI at a glance QUICK REFERENCE

– Corresponding mobile wireless contract. 3. Place the fuel cap in the bracket at- – Bluetooth, WiFi, and Siri voice opera- tached to the fuel filler flap. tion are switched on on the iPhone. Gasoline Switching on Bluetooth and CarPlay For the best fuel efficiency, the gasoline Via the Central Information Display (CID): should be sulfur-free or very low in sulfur content. 1. "My MINI" Refuel only with unleaded gasoline without 2. "System settings" metallic additives. 3. "Mobile devices" Information on the recommended fuel grade 4. "Settings" can be found in the Owner's Manual. 5. Select the following settings: Wheels and tires – "Bluetooth®" – "Apple CarPlay" Tire inflation pressure specifications

Pairing iPhone with CarPlay Pair iPhone via Bluetooth with the vehicle. Select CarPlay as the function: "Apple CarPlay" The iPhone is connected to the vehicle and displayed in the device list.

Refueling The tire inflation pressure values can be found on the sign on the door pillar. Refueling Checking the tire inflation pressure Fuel cap Regularly check the tire inflation pressure and correct it as needed: 1. Press the rear edge of the fuel filler flap to open it. – At least twice a month. – Before embarking on an extended trip.

After correcting the tire inflation pressure Reinitialize the Flat Tire Monitor. Reset the Tire Pressure Monitor.

2. Turn the fuel cap counterclockwise.

33 Online Edition for Part no. 01402723835 - VI/18 Seite 34

QUICK REFERENCE Your MINI at a glance

Electronic oil measurement Providing assistance

Requirements Hazard warning flashers A current measured value is available after approx. 30 minutes of driving. During a shorter trip, the status of the last, sufficiently long trip is displayed.

Displaying the engine oil level Via the Central Information Display (CID): 1. "My MINI" 2. "Vehicle status" 3. "Engine oil level" The button is located above the Control Dis- play. The engine oil level is displayed. Adding engine oil Breakdown assistance

General information MINI Roadside Assistance Switch off the ignition and safely park the This service can be reached around the vehicle before engine oil is added. clock in many countries. 1. "MINI Connected" Adding 2. "MINI Assist" 3. "MINI Roadside Assistance" The contact to the MINI Roadside Assis- tance is established. A telephone number is displayed, if needed. Select to dial the telephone number on a connected mobile phone.

Only add engine oil when the message is displayed in the instrument cluster. Observe the quantity to be added in the message. Take care not to add too much engine oil. Observe recommended engine oil types.

34 Online Edition for Part no. 01402723835 - VI/18 Seite 35

Your MINI at a glance QUICK REFERENCE

35 Online Edition for Part no. 01402723835 - VI/18

36 Online Edition for Part no. 01402723835 - VI/18 AT A GLANCE

Cockpit ...... 38 Central Information Display (CID) ...... 42 Voice activation system ...... 51 General settings ...... 54 Owner's Manual media ...... 66

37 Online Edition for Part no. 01402723835 - VI/18 Seite 38

AT A GLANCE Cockpit

Cockpit

Vehicle features and options e. g., due to the selected options or country versions. This also applies to safety-related functions and systems. When using these This chapter describes all standard, country- functions and systems, the applicable laws specific and optional features offered with and regulations must be observed. the series. It also describes features that are not necessarily available in your vehicle,

In the vicinity of the steering wheel

1 Power windows 89 Lights off 2 Exterior mirror operation 103 Daytime running lights 159 3 Buttons of the central locking sys- Parking lights 157 tem 75 4 Lights Low beams 157 Front fog lights 160

Light switch 157

38 Online Edition for Part no. 01402723835 - VI/18 Seite 39

Cockpit AT A GLANCE

Automatic headlight con- Canada: roadside parking trol 158 light 158 Cornering light 159 Onboard Computer 147 High-beam Assistant 159 Instrument lighting 161 7 Instrument cluster 137 8 Steering column stalk, right 5 Steering wheel buttons, left Windshield wipers 123 Camera-based cruise control on/off 189 Rain sensor 124 Cruise control on/off 196

Cleaning windows 121 Cruise control: store speed

Rear window wiper 122 Pausing, continuing cruise control Clean the rear window 122 Cruise control: increase speed

9 Steering wheel buttons, right Cruise control: reduce speed Voice activation 51

Camera-based cruise control: reduce distance Telephone Camera-based cruise control: increase distance Confirm the selection 147

6 Steering column stalk, left Move selection up 147 Turn signal 119

Move selection down 147 High beams, headlight flasher 119 Increase volume High-beam Assistant 159

Reduce volume

10 Horn, entire surface

39 Online Edition for Part no. 01402723835 - VI/18 Seite 40

AT A GLANCE Cockpit

11 Adjust the steering wheel 105 13 Operate the tailgate 80 12 Unlock hood 277

In the vicinity of the center console

1 Hazard warning system 298 6 PDC Park Distance Con- trol 198 Rearview camera 201 Intelligent Safety 174 Parking assistant 204 Auto Start/Stop func- 2 Control Display 42 tion 115 3 Radio/Multimedia Start/stop the engine and 4 Glove compartment 225 switch the ignition on/ 5 Climate control 209 off 112 DSC Dynamic Stability Control 184 MINI Driving Modes switch 186

40 Online Edition for Part no. 01402723835 - VI/18 Seite 41

Cockpit AT A GLANCE

7 Steptronic transmission selector Manual transmission selector lever 128 lever 127 8 Controller with buttons 45 Controller with buttons 45 9 Parking brake 117

In the vicinity of the roofliner

1 Emergency Request, 4 Ambient light 161 SOS 299

2 Indicator light, front-seat pas- 5 Panoramic glass sunroof 91 senger airbag 166

3 Reading lights 161 6 Interior lights 161

41 Online Edition for Part no. 01402723835 - VI/18 Seite 42

AT A GLANCE Central Information Display (CID)

Central Information Display (CID)

Vehicle features and options Input and display

This chapter describes all standard, country- Letters and numbers specific and optional features offered with Depending on the menu, you can switch be- the series. It also describes features that are tween entering upper and lower case letters not necessarily available in your vehicle, and numbers: e. g., due to the selected options or country versions. This also applies to safety-related Symbol Function functions and systems. When using these or Change between capital and functions and systems, the applicable laws lower-case letters. and regulations must be observed. Insert blank space. Concept Use voice activation. Confirm entry. The Central Information Display (CID) combines the functions of a multitude of Without navigation system switches. These functions can be operated Select the symbol. via the Controller or touchscreen. Entry comparison When entering names and addresses, the Safety information choice is narrowed down with every letter entered and letters may be added automatically. WARNING Entries are continuously compared with Operating the integrated information sys- data stored in the vehicle. tems and communication devices while – Only those letters are offered during en- driving can distract from traffic. It is pos- try for which data is available. sible to lose control of the vehicle. There is a risk of an accident. Only use the systems – Destination search: place names can be or devices when the traffic situation al- entered in all languages that are availa- lows. As warranted, stop and use the sys- ble on the Control Display. tems and devices while the vehicle is stationary. Activating/deactivating the functions Several menu items are preceded by a checkbox. The checkbox indicates whether the function is activated or deactivated. Se- lecting the menu item activates or deacti- vates the function.

42 Online Edition for Part no. 01402723835 - VI/18 Seite 43

Central Information Display (CID) AT A GLANCE

Function is activated. Entertainment Function is deactivated. Symbol Meaning Status information Bluetooth audio. General information USB audio interface. The status field can be found in the upper Mobile phone audio interface. area of the Control Display. Status information is displayed in the form of symbols. Additional symbols

Radio Symbol Meaning

Symbol Meaning Check Control message. HD Radio station is being re- The sound output has been ceived. switched off. Satellite radio is switched on. Encrypted connection not active. Telephone Request for the current vehicle position. Symbol Meaning Checking the current vehicle po- Incoming or outgoing call. sition. Missed call. Split screen Signal strength of cellular network. General information Symbol flashes: network search. Additional information can be displayed on Cellular network is not available. the right side of the split screen, for instance information from the Onboard Com- Roaming is active. puter. SMS text message received. In the divided screen view, the so-called split screen, this information remains visi- Message received. ble even when switching to another menu. Reminder. Switching the split screen on/off Sending not possible. 1. Press button. 2. "Split screen"

43 Online Edition for Part no. 01402723835 - VI/18 Seite 44

AT A GLANCE Central Information Display (CID)

Selecting the display Control Display The display can be selected in menus, where the split screen is supported. General information 1. Move the Controller to the right until To clean the Control Display, follow the care the split screen is selected. instructions, refer to page 310. 2. Press the Controller. In the case of very high temperatures on the Control Display, for instance due to in- 3. Select the desired setting. tense solar radiation, the brightness may be reduced down to complete deactivation. Specifying the number of displays Once the temperature is reduced, for in- It is possible to specify the number of dis- stance through shade or air conditioning, plays. the normal functions are restored.

1. Move the Controller to the right until Safety information the split screen is selected. 2. Press the Controller. NOTICE 3. "Personalize menu" Objects in the area in the front of the Con- 4. Select the desired setting. trol Display can shift and damage the Con- 5. Move the Controller to the left. trol Display. There is a risk of damage to property. Do not place objects in the area in front of the Control Display. Control elements Switching on/off automatically Overview The Control Display is switched on automatically after unlocking. In certain situations, the Control Display is switched off automatically, for instance if no operation is performed on the vehicle for several minutes.

Switching on/off manually The Control Display can also be switched off manually. 1 Control Display with touchscreen 2 Controller with buttons and, depending 1. Press button. on the equipment version, with touch- 2. "Turn off control display" pad Press the Controller or any button on the Controller to switch it back on again.

44 Online Edition for Part no. 01402723835 - VI/18 Seite 45

Central Information Display (CID) AT A GLANCE

Controller with navigation system Buttons on the Controller

General information Button Function The buttons can be used to open the menus Press once: call up main menu. directly. The Controller can be used to select menu items and enter the settings. Press twice: open recently used Some functions of the Central Information menus. Display (CID) can be operated using the touchpad on the Controller, refer to Open the Communication menu. page 49: Open the Media/Radio menu. Operation – Turn. Open destination input menu for navigation. Open navigation map.

Open the previous display.

Open the Options menu.

– Press. Controller without navigation system

General information The buttons can be used to open the menus directly. The Controller can be used to select menu items and enter the settings. Some functions of the Central Information Display (CID) can be operated using the touchpad on the Controller, refer to – Move in four directions. page 49: Operation – Turn.

45 Online Edition for Part no. 01402723835 - VI/18 Seite 46

AT A GLANCE Central Information Display (CID)

Button Function Open the previous display.

Open the Options menu.

Operating with the Controller – Press. Opening the main menu Press the button.

– Move in two directions.

The main menu is displayed. All Central Information Display (CID) functions can be called up via the main menu. Selecting menu items Highlighted menu items can be selected. Buttons on the Controller 1. Turn the Controller until the desired menu item is highlighted. Button Function Press once: call up main menu. Press twice: open recently used menus. Open the Communication menu.

Open the Media/Radio menu.

2. Press the Controller.

46 Online Edition for Part no. 01402723835 - VI/18 Seite 47

Central Information Display (CID) AT A GLANCE

Changing between displays 5. "Brightness at night" After a menu item is selected, for instance 6. Turn the Controller until the desired set- "System settings", a new display appears. ting is displayed. – Move the Controller to the left. 7. Press the Controller. Closes the current display and shows the previous display. Entering letters and numbers

– Press button. Input The previous display opens. 1. Turn the Controller: select letters or – Move the Controller to the right. numbers. New display is opened. 2. : confirm entry. An arrow indicates that additional displays can be opened. Deleting Opening recently used menus Symbol Function The recently used menus can be displayed. Press the Controller: delete letters or number. Press button twice. or Hold the Controller down: delete all letters or numbers. Opening the Options menu Press button. Using alphabetical lists For alphabetical lists with more than 30 en- The "Options" menu is displayed. tries, the letters for which there is an entry are displayed at the left edge. The Options menu consists of various areas: – Screen settings, for instance "Split 1. Turn the Controller to the left or right screen". quickly. – Control options for the selected main All letters for which there are entries menu, for instance for "Media/Radio". are displayed on the left edge. – If applicable, further operating options 2. Select the first letter of the desired en- for the selected menu, for instance "Save try. station". The first entry of the selected letter is displayed. Changing settings Settings, such as brightness, can be entered. Operating via touchscreen 1. "My MINI" 2. "System settings" General information 3. "Displays" The Control Display is equipped with a 4. "Control display" touchscreen.

47 Online Edition for Part no. 01402723835 - VI/18 Seite 48

AT A GLANCE Central Information Display (CID)

Touch screen with your fingers. Do not use 2. Tap on symbol. any objects. Changing settings Opening the main menu Settings such as brightness can be changed Tap on symbol. via the touchscreen. 1. "My MINI" 2. "System settings" 3. "Displays" 4. "Control display" 5. "Brightness at night" 6. To create the desired setting: – Slide in the selected field to the right The main menu is displayed. or left, until the desired setting is displayed. All Central Information Display (CID) functions can be called up via the main menu. – , Tap on symbol. Selecting menu items Entering letters and numbers Tap desired menu item. Input 1. Touch the symbol on the touchscreen. A keyboard is displayed in the Control Display. 2. Enter letters and numbers.

Deleting

Symbol Function Changing between displays Tapping the symbol: delete the After a menu item is selected, a new display letter or number. opens. Tapping and holding the symbol An arrow indicates that additional displays for an extended period: delete all can be opened. letters or numbers. – Swipe to the left. – Tap arrow. Operating navigation map New display is opened. The navigation map can be moved with the touchscreen. Opening recently used menus 1. Tap on symbol.

48 Online Edition for Part no. 01402723835 - VI/18 Seite 49

Central Information Display (CID) AT A GLANCE

Function Operation sible. Where necessary, enter special characters via the Controller. Enlarge/shrink Drag in or out with the – To delete a character, swipe to the left map. fingers. on the touchpad. – To enter a blank space, swipe to the Touchpad right in the center of the touchpad. – To enter a hyphen, swipe to the right in the upper area of the touchpad. General information – To enter an underscore, swipe to the Some functions of the Central Information right in the lower area of the touchpad. Display (CID) can be operated using the touchpad on the Controller: Using the map The map in the navigation system can be Selecting functions moved via the touchpad. 1. "My MINI" Function Operation 2. "System settings" Move map. Swipe in the appropriate 3. "Touchpad" direction. 4. Select the desired function. Enlarge/ Drag in or out on the – "Speller": enter letters and numbers. shrink map. touchpad with fingers. – "Map": using the map. Display menu. Tap once. – "Search fields": write letters without selecting the list field. – "Audio feedback": pronounces en- Programmable memory but- tered letters and numbers. tons Entering letters and numbers Entering letters requires some practice at General information the beginning. When entering, pay atten- The Central Information Display (CID) function to the following: tions can be stored on the programmable – The system distinguishes between up- memory buttons and called up directly, for per and lower-case letters and numbers. instance radio stations, navigation destina- To make entries, it may be necessary to tions, phone numbers and menu entries. change between upper and lower-case Settings are stored for the driver profile letters, numbers and characters, refer to currently used. page 47. – Enter characters as they are displayed Storing a function on the Control Display. 1. Select the function via the Central Infor- – Always enter associated characters, mation Display (CID). such as accents or periods so that the letter can be clearly recognized. The set 2. Press and hold the desired but- language determines what input is pos- ton, until a signal sounds.

49 Online Edition for Part no. 01402723835 - VI/18 Seite 50

AT A GLANCE Central Information Display (CID)

Running a function Press button. The function will work immediately. This means, for instance that the number is dialed when a phone number is selected.

Displaying the key assignment Touch buttons with finger. Do not wear gloves or use objects. The button assignment is displayed at the top edge of screen. Deleting the button assignments 1. Press buttons 1 and 6 simultaneously for approx. 5 seconds. 2. "OK"

50 Online Edition for Part no. 01402723835 - VI/18 Seite 51

Voice activation system AT A GLANCE

Voice activation system

Vehicle features and options Functional requirements

This chapter describes all standard, country- Via the Control Display, set a language that specific and optional features offered with is also supported by the voice activation the series. It also describes features that are system so that the spoken commands can be not necessarily available in your vehicle, identified. e. g., due to the selected options or country To set the language, refer to page 54. versions. This also applies to safety-related functions and systems. When using these functions and systems, the applicable laws and regulations must be observed. Using the voice activation system

Concept Activating the voice activation system Most functions displayed on the Control Display can be operated by voice commands 1. Press the button on the steering via the voice activation system. The system wheel. supports you with announcements during 2. Wait for the signal. input. 3. Say the command. This symbol in the instrument cluster General information indicates that the voice activation system is active. – Functions that can only be used when No other commands may be available. In the vehicle is stationary can only be op- this case, operate the function via the Cen- erated via the voice activation system to tral Information Display (CID). a limited extent. – The system uses a special microphone Terminating the voice activation on the driver's side. system – ›...‹ in the Owner's Manual denotes ver- Press the button on the steering bal instructions to use with the voice ac- wheel or ›Cancel‹. tivation system. – Say the commands, numbers, and letters Using a smartphone via voice smoothly and with normal volume, em- activation phasis, and speed. A smartphone connected to the vehicle can – Always say commands in the language be used via voice activation. of the voice activation system.

51 Online Edition for Part no. 01402723835 - VI/18 Seite 52

AT A GLANCE Voice activation system

Activate voice command response on the Help on the voice activation system smartphone for this purpose. – To have information on the operating principle of the voice activation system 1. Press and hold the button on read out loud: ›General information on the steering wheel for approx. 3 sec- voice control‹. onds. – To have help for the current menu read Voice command response is activated on out loud: ›Help‹. the smartphone. 2. Release the button. Example: opening the tone set- If activation is successful, a confirmation appears on the Control Display. tings If it was not possible to activate voice command response, the list of Bluetooth devices The commands of the menu items are spo- appears on the Control Display. ken just as they are selected via the Con- troller. 1. Switch on the Entertainment sound out- Possible commands put, if needed.

General information 2. Press button on the steering wheel. Most menu items on the Control Display can 3. ›Media and radio‹ be voiced as commands. Commands from other menus can also be 4. ›Tone‹ spoken. You may select list entries such as phone list entries via voice activation. Read these Settings list entries out loud exactly as they are shown in the respective list. Setting the voice dialog You can set the system to use standard dia- Displaying possible commands log or a short version. The following is displayed in the top area of The short version of the voice dialog plays the Control Display: back short messages in abbreviated form. – Some possible commands for the current 1. "My MINI" menu. – Some possible commands from other 2. "System settings" menus. 3. "Language" – Status of the voice recognition. 4. "Speech mode:" – Encrypted connection is not availa- 5. Select the desired setting. ble.

52 Online Edition for Part no. 01402723835 - VI/18 Seite 53

Voice activation system AT A GLANCE

Activating voice recognition via Adjusting the volume the server The voice recognition feature via the server Turn the volume button during the spoken provides a dictation function and a natural instructions until the desired volume is set. method of entering destinations while im- – The volume remains constant even if the proving the quality of voice recognition. To volume of other audio sources is use the functions, data is transmitted to a changed. service provider via an encrypted connec- – The volume is stored for the profile cur- tion and stored locally there. rently used. 1. "My MINI" 2. "System settings" Information on Emergency 3. "Language" Requests 4. "Server speech recognition"

Speaking during voice output Do not use the voice activation system to initiate an Emergency Request. In stressful It is possible to answer during inquiries of situations, the voice and vocal pitch can the voice activation system. The function change. This can unnecessarily delay the es- can be deactivated if inquiries are often un- tablishment of a phone connection. desirably interrupted, for instance due to Instead, use the SOS button, refer to background noise or talking. page 299, close to the interior mirror. 1. "My MINI" 2. "System settings" Environmental conditions 3. "Language" 4. "Speaking during voice output" – Keep the doors, windows, and glass sunroof closed to prevent noise interference. Setting the language – Avoid making other noise in the vehicle while speaking. The language to be used for voice activation and system announcements can be set. 1. "My MINI" 2. "System settings" 3. "Language" 4. "Language:" 5. Select the desired language.

53 Online Edition for Part no. 01402723835 - VI/18 Seite 54

AT A GLANCE General settings

General settings

Vehicle features and options 3. "Date and time" 4. "Time zone:" This chapter describes all standard, country- 5. Select the desired setting. specific and optional features offered with The setting is stored for the driver profile the series. It also describes features that are currently used. not necessarily available in your vehicle, e. g., due to the selected options or country versions. This also applies to safety-related Setting the time functions and systems. When using these Via the Central Information Display (CID): functions and systems, the applicable laws 1. "My MINI" and regulations must be observed. 2. "System settings" 3. "Date and time" Language 4. "Time:" 5. Turn the Controller until the desired Setting the language hours are displayed. Via the Central Information Display (CID): 6. Press the Controller. 1. "My MINI" 7. Turn the Controller until the desired mi- 2. "System settings" nutes are displayed. 3. "Language" 8. Press the Controller. 4. "Language:" Setting the time format 5. Select the desired setting. Via the Central Information Display (CID): The setting is stored for the driver profile currently used. 1. "My MINI" 2. "System settings" Setting the voice dialog 3. "Date and time" Voice dialog for the voice activation system, 4. "Time format:" refer to page 52. 5. Select the desired setting. The setting is stored for the driver profile Time currently used.

Setting the time zone Via the Central Information Display (CID): 1. "My MINI" 2. "System settings"

54 Online Edition for Part no. 01402723835 - VI/18 Seite 55

General settings AT A GLANCE

Date 4. Select the desired menu item. 5. Select the desired setting. Setting the date The setting is stored for the driver profile Via the Central Information Display (CID): currently used. 1. "My MINI" 2. "System settings" Activating/deactivating the 3. "Date and time" display of the current vehicle 4. "Date:" position 5. Turn the Controller until the desired day is displayed. Concept 6. Press the Controller. If vehicle location has been activated, the 7. Make the settings for the month and current vehicle position can be displayed in year. the MINI Connected app. Setting the date format Activating/deactivating Via the Central Information Display (CID): Via the Central Information Display (CID): 1. "My MINI" 1. "My MINI" 2. "System settings" 2. "Vehicle settings" 3. "Date and time" 3. "Vehicle tracking" 4. "Date format:" 4. "Vehicle tracking" 5. Select the desired setting. 5. Select the desired setting. The setting is stored for the driver profile currently used. Activating/deactivating popup windows Setting the units of measurement For some functions, popup windows are displayed automatically on the Control Display. Some of these popup windows can be acti- You can set the units of measurement for vated or deactivated. some values, for example, fuel consumption, distances and temperature. Via the Central Information Display (CID): Via the Central Information Display (CID): 1. "My MINI" 1. "My MINI" 2. "System settings" 2. "System settings" 3. "Pop-ups" 3. "Units" 4. Select the desired setting. The setting is stored for the driver profile currently used.

55 Online Edition for Part no. 01402723835 - VI/18 Seite 56

AT A GLANCE General settings

Control Display Messages

Brightness Concept Via the Central Information Display (CID): The menu centrally displays all messages ar- riving in the vehicle in list form. 1. "My MINI" 2. "System settings" General information 3. "Displays" The following messages can be displayed: 4. "Control display" – Traffic messages. 5. "Brightness at night" – Check Control messages. 6. Turn the Controller until the desired – Communication messages, for example brightness is set. e-mails, SMS text messages or remind- 7. Press the Controller. ers. – Service requirements messages. The setting is stored for the driver profile currently used. Messages are additionally displayed in the status field. Depending on the light conditions, the brightness settings may not be clearly visible. Retrieving messages Via the Central Information Display (CID): Screensaver 1. "Notifications" If no entries are made via the Central Infor- 2. Select the desired message. mation Display (CID), a screensaver can be displayed after an adjustable time. The respective menu is opened, where the message is displayed. Via the Central Information Display (CID): 1. "My MINI" Deleting messages 2. "System settings" All messages, except Check Control mes- 3. "Displays" sages, can be deleted from the list. Check Control messages are displayed as long as 4. "Control display" they are relevant. 5. "Screensaver" Via the Central Information Display (CID): 6. Select the desired setting. 1. "Notifications" The setting is stored for the driver profile 2. Select the desired message. currently used. 3. Press button. 4. "Delete this notification" or "Delete all notifications" Settings The following settings can be adjusted:

56 Online Edition for Part no. 01402723835 - VI/18 Seite 57

General settings AT A GLANCE

– Select the applications, from which mes- Deleting personal data in the sages will be permitted. vehicle – Sort the messages according to date or priority. Concept Via the Central Information Display (CID): Depending on the usage, the vehicle stores 1. "My MINI" personal data, such as stored radio stations. This personal data can be permanently de- 2. "System settings" leted via the Central Information Display 3. "Notifications" (CID). 4. Select the desired setting. General information Depending on the vehicle equipment, the Data protection following data is deleted: – Driver profile settings. Data transfer – Stored radio stations. – Stored programmable memory buttons. Concept – Travel and Onboard Computer informa- The vehicle offers various functions which tion. require data to be transferred to MINI or a – Music collection. service provider. The data transfer can be – Navigation, for instance stored destina- deactivated for some functions. tions. General information – Phone book. With data transfer deactivated, the respec- – Office data, for instance voice notes. tive function cannot be used. – Login accounts. Only make these settings while stationary. Altogether, the deletion of the data can take up to 15 minutes. Activating/deactivating the data transfer Functional requirement Follow the instructions on the Control Dis- Data can only be deleted while stationary. play. Via the Central Information Display (CID): Deleting data Heed and follow the instructions on the 1. Switch on the ignition. Control Display. 2. "My MINI" Via the Central Information Display (CID): 3. "System settings" 1. Switch on the ignition. 4. "Data privacy" 2. "My MINI" 5. Select the desired setting. 3. "System settings" 4. "Data privacy" 5. "Delete personal data"

57 Online Edition for Part no. 01402723835 - VI/18 Seite 58

AT A GLANCE General settings

6. "Delete personal data" Function Connec- 7. "OK" tion type 8. Exit and lock the vehicle. Using compatible apps via Bluetooth After 15 minutes, the deletion process is the Central Information Dis- or USB. completed. play (CID). If not all of the data was deleted, repeat the USB storage device: USB. deletion. Exporting and importing driver profiles. Canceling deletion Performing software up- Start the engine to cancel deletion of the dates. data. Playing music. Playing videos from the USB. Connections smartphone or the USB storage device. Concept Using Apple CarPlay apps Bluetooth via the Central Information and WiFi. Various connection types are available for Display (CID) and voice op- using mobile devices in the vehicle. The eration. connection type to select depends on the mobile device and the desired function. The following connection types require one- General information time pairing with the vehicle: – Bluetooth. The following overview shows possible functions and the suitable connection types – Apple CarPlay for them. The scope of functions depends on Paired devices are automatically recognized the mobile device. later on and connected to the vehicle. Function Connec- tion type Safety information Making calls via the hands- Bluetooth. free system. WARNING Using phone functions via Operating the integrated information sys- the Central Information Dis- tems and communication devices while play (CID). driving can distract from traffic. It is possible to lose control of the vehicle. There is Using the smartphone Of- a risk of an accident. Only use the systems fice functions. or devices when the traffic situation al- Playing music from the Bluetooth lows. As warranted, stop and use the sys- smartphone or the audio or USB. tems and devices while the vehicle is sta- player. tionary.

58 Online Edition for Part no. 01402723835 - VI/18 Seite 59

General settings AT A GLANCE

Compatible devices Switching on Bluetooth Via the Central Information Display (CID): General information 1. "My MINI" Information on mobile devices compatible with the vehicle can be found at www.mini- 2. "System settings" usa.com/bluetooth. 3. "Mobile devices" Malfunctions may occur with devices not 4. "Settings" listed or deviating software versions. 5. "Bluetooth®" Displaying the vehicle identification number and software part number Activating/deactivating telephone functions When looking for compatible devices, you may have to state the vehicle identification To use all supported functions of a mobile number and the software part number. phone, the following functions must be acti- These numbers can be displayed in the ve- vated prior to pairing. hicle. Via the Central Information Display (CID): Via the Central Information Display (CID): 1. "My MINI" 1. "My MINI" 2. "System settings" 2. "System settings" 3. "Mobile devices" 3. "Mobile devices" 4. "Settings" 4. "Settings" 5. Select desired setting: 5. "Bluetooth® info" – "Office" 6. "System information" Activate function to transmit short messages, e-mails, calendars, tasks, A software update, refer to page 64, can notes, and reminders to the vehicle. be performed, if needed. Costs can be incurred by transmitting all data to the vehicle. Bluetooth connection – "Contact images" Functional requirements Activate function to show the contact pictures. – Compatible device, refer to page 59, with Bluetooth interface. 6. Move the Controller to the left. – The remote control is in the vehicle. Pairing the mobile device with the – The device is ready for operation. vehicle – Bluetooth is activated on the device and Via the Central Information Display (CID): in the vehicle, refer to page 59. – Bluetooth pre-settings, such as visibil- 1. "My MINI" ity, may be required on the device; refer 2. "System settings" to the owner's manual of the device. 3. "Mobile devices" 4. "Connect new device"

59 Online Edition for Part no. 01402723835 - VI/18 Seite 60

AT A GLANCE General settings

5. Select the functions for which the de- – There are too many Bluetooth devices vice will be used: connected to the mobile phone or vehi- – "Telephone" cle. – "Bluetooth® audio" In the vehicle, delete Bluetooth connections with other devices. – "Apps" Delete all known Bluetooth connections – "Apple CarPlay" from the device list on the mobile phone The Bluetooth name of the vehicle is and start a new device search. displayed on the Control Display. – The mobile phone is in power-save mode 6. Search for Bluetooth devices in the vi- or has only a limited remaining battery cinity of the mobile device. life. The Bluetooth name of the vehicle ap- Charge mobile phone. pears on the mobile device display. Why does the mobile phone no longer re- Select the Bluetooth name of the vehi- act? cle. – The applications on the mobile phone do 7. Depending on the mobile device, a con- not function anymore. trol number is displayed or the control Switch the mobile phone off and on number must be entered. again. – Compare the control number dis- – Possibly too high or too low ambient played on the Control Display with temperatures for mobile phone opera- the control number on the display of tion. the device. Do not subject the mobile phone to ex- Confirm the control number on the treme ambient temperatures. device and on the Control Display. Why can phone functions not be used via – Enter and confirm the same control the Central Information Display (CID)? number on the device and via the Central Information Display (CID). – The mobile phone may not be properly configured, for instance as Bluetooth au- The device is connected and displayed dio device. in the device list. Connect the mobile phone with the tele- If connection was not successful: Fre- phone or additional phone function. quently Asked Questions, refer to page 60. Why are no or not all phone book entries Frequently asked questions displayed or why are they incomplete? – Transmission of the phone book entries All requirements are met and all required is not yet complete. steps were completed in the specified order. Despite that, the mobile device does not – It is possible that only the phone book function as expected. entries of the mobile phone or the SIM card are transmitted. In this case, the following explanations can help: – It may not be possible to display phone book entries with special characters. Why could the mobile phone not be paired or connected? – It may not be possible to transmit contacts from social networks.

60 Online Edition for Part no. 01402723835 - VI/18 Seite 61

General settings AT A GLANCE

– The number of phone book entries to be – Playing music files via USB audio. stored is too high. – Playing videos via USB video. – Data volume of the contact too large, for – Loading of software updates, refer to instance due to stored information such page 64. as notes. Follow the following when connecting: Reduce the data volume of the contact. – Do not use force when plugging the con- – A mobile phone is only connected as an nector into the USB interface. audio source. – Use a flexible adapter cable. Reconfigure the mobile phone and connect it with the telephone or additional – Protect the USB storage device against phone function. mechanical damage. How can the phone connection quality be – Due to the large number of USB media improved? available on the market, it cannot be guaranteed that every device is operable – The strength of the Bluetooth signal on on the vehicle. the mobile phone can be adjusted, depending on the mobile phone. – Do not expose USB media to extreme environmental conditions, such as very – Insert mobile phone into the wireless high temperatures; refer to the owner's charging tray. manual of the device. – Adjust the volume of the microphone – Due to the many different compression and loudspeakers separately. techniques, proper playback of the me- If all points in this list have been checked dia stored on the USB storage device and the required function is still not availa- cannot be guaranteed in all cases. ble, contact the hotline, a dealer’s service – A connected USB storage device will be center or another qualified service center or supplied with charging current via the repair shop. USB interface if the device supports this. USB connection – To ensure proper transmission of the stored data, do not charge a USB storage General information device via the onboard socket, when it Mobile devices with a USB port are con- is connected to the USB interface. nected to the USB interface. – Depending on how the USB storage de- – Mobile phones. vice is being used, settings may be re- – Audio devices with USB port, for in- quired on the USB storage device, refer stance MP3 player. to the owner's manual of the device. – USB storage devices. Not compatible USB media: Common file systems are supported. – USB hard drives. FAT32 and exFAT are the recommended – USB hubs. formats. – USB memory card readers with multiple The following applications are possible: inserts. – Exporting and importing driver profiles, – HFS-formatted USB media. refer to page 83. – Devices such as fans or lamps.

61 Online Edition for Part no. 01402723835 - VI/18 Seite 62

AT A GLANCE General settings

Functional requirement "Apple CarPlay" Compatible device, refer to page 59, with The iPhone is connected to the vehicle and USB interface. displayed in the device list, refer to page 63. Connecting the device Connect the USB storage device using a Operation suitable adapter cable to a USB interface, For more information, refer to the refer to page 224. Integrated Owner's Manual in the vehicle or The USB storage device is connected to the the printed Owner's Manual for navigation, vehicle and displayed in the device list. entertainment, communication. Apple CarPlay preparation Frequently asked questions All requirements are met and all required Concept steps were completed in the specified order. Despite that, the mobile device does not CarPlay allows certain functions of a com- function as expected. patible Apple iPhone to be used via Siri voice operation and the Central Information In this case, the following explanations can Display (CID). help: The iPhone has already been paired with Functional requirements Apple CarPlay. When a new connection is – Compatible iPhone, refer to page 59. established, CarPlay can no longer be selected. iPhone 5 or later with iOS 7.1 or later. – Delete the iPhone concerned from the – Corresponding mobile wireless contract. device list. – Bluetooth, WiFi, and Siri voice opera- – On the iPhone, delete the vehicle con- tion are switched on on the iPhone. cerned from the list of stored vehicles under Bluetooth and under WiFi. Switching on Bluetooth and CarPlay – Pair the iPhone as a new device. Via the Central Information Display (CID): If the steps listed have been carried out and 1. "My MINI" the required function is still not available: 2. "System settings" contact the hotline, a dealer’s service center or another qualified service center or repair 3. "Mobile devices" shop. 4. "Settings" 5. Select the following settings: Managing mobile devices – "Bluetooth®" General information – "Apple CarPlay" – After one-time pairing, the devices are automatically recognized and recon- Pairing iPhone with CarPlay nected when the ignition is switched on. Pairing an iPhone with the vehicle, refer to page 59, via Bluetooth Select CarPlay as the function:

62 Online Edition for Part no. 01402723835 - VI/18 Seite 63

General settings AT A GLANCE

– The data stored on the SIM card or in Disconnecting the device the mobile phone are transferred to the The connection of the device to the vehicle vehicle after recognition. is disconnected. – For some devices, certain settings may The device remains paired and can be con- be necessary, for instance authorization, nected again, refer to page 63. see owner's manual of the device. Via the Central Information Display (CID): Displaying the device list 1. "My MINI" All devices paired and/or connected with 2. "System settings" the vehicle are displayed in the device list. 3. "Mobile devices" Via the Central Information Display (CID): 4. Select device. 1. "My MINI" 5. "Disconnect device" 2. "System settings" 3. "Mobile devices" Connecting the device A symbol indicates, for which function a de- A disconnected device can be reconnected. vice is used. Via the Central Information Display (CID): Symbol Function 1. "My MINI" "Telephone" 2. "System settings" "Additional telephone" 3. "Mobile devices" 4. Select device. "Bluetooth® audio" 5. "Connect device" "Apps" The functions that were assigned to the de- "Apple CarPlay" vice before disconnecting are assigned to the device when it is reconnected. If the de- Configuring the device vice is already connected, these functions are deactivated. Functions can be activated or deactivated for paired and connected devices. Deleting the device Via the Central Information Display (CID): Via the Central Information Display (CID): 1. "My MINI" 1. "My MINI" 2. "System settings" 2. "System settings" 3. "Mobile devices" 3. "Mobile devices" 4. Select the desired device. 4. Select device. 5. Select the desired setting. 5. "Delete device" If a function is assigned to a device, the The device is disconnected and removed function will be deactivated where appro- from the device list. priate for a device that is already connected and the device will be disconnected.

63 Online Edition for Part no. 01402723835 - VI/18 Seite 64

AT A GLANCE General settings

Swapping the telephone and additional Updating software via USB phone The software may only be updated when the If two mobile phones are connected to the vehicle is stationary. vehicle, the functions of the phone and ad- Via the Central Information Display (CID): ditional phone can be switched. 1. Store the file for the software update in Via the Central Information Display (CID): the main directory of a USB flash drive. 1. "My MINI" 2. Connect the USB data storage to a USB 2. "System settings" interface. 3. "Mobile devices" 3. "My MINI" 4. "Settings" 4. "System settings" 5. "Swap telephone/additional tel." 5. "Software update" 6. "Update software" Software update 7. "USB" General information 8. "Install software" The vehicle supports a large number of mo- 9. "OK" bile devices, for instance mobile phones and 10. Wait for the update to complete. MP3 players. Software updates are available 11. Confirm system restart. for many of the supported devices. The vehicle is maintained up-to-date via regular vehicle software updates. Restoring the software version Updates and related current information is The software version before the last soft- available on the Internet at www.mini.com/ ware update and the version before the first update. software update can be restored. The software may only be restored when Displaying the installed software the vehicle is stationary. version Via the Central Information Display (CID): The software version installed in the vehicle 1. "My MINI" is displayed. 2. "System settings" Via the Central Information Display (CID): 3. "Software update" 1. "My MINI" 4. "Restore software" 2. "System settings" 5. – "Previous version" 3. "Software update" The previous software version is re- 4. "Show current version" stored. If an update has been carried out before, se- – "Default software settings" lect the desired version to display additional The first software version is re- information. stored. 6. "Remove software" 7. "OK"

64 Online Edition for Part no. 01402723835 - VI/18 Seite 65

General settings AT A GLANCE

8. Wait for restore. 9. Confirm system restart.

65 Online Edition for Part no. 01402723835 - VI/18 Seite 66

AT A GLANCE Owner's Manual media

Owner's Manual media

Vehicle features and options Supplementary Owner's Manuals Also follow the instructions of the Supple- This chapter describes all standard, country- mentary Owner's Manuals, which are in- specific and optional features offered with cluded in addition to the onboard literature. the series. It also describes features that are not necessarily available in your vehicle, e. g., due to the selected options or country Integrated Owner's Manual in versions. This also applies to safety-related the vehicle functions and systems. When using these functions and systems, the applicable laws and regulations must be observed. Concept The Integrated Owner's Manual specifically describes features and functions found in General information the vehicle. The Integrated Owner's Manual can be displayed on the Control Display. You can use the following media formats to call up the content in the Owner's Manual: Selecting the Owner's Manual – Printed Owner's Manual, refer to 1. Press button. page 66. – Integrated Owner's Manual in the vehi- 2. "My MINI" cle, refer to page 66. 3. "Owner's Manual" 4. Select the required method of accessing the contents. Printed Owner's Manual Scrolling through the owner's Concept manual The printed Owner's Manual describes all Turn the Controller, until the next or previ- standard, country-specific, and optional fea- ous contents are displayed. tures offered with the series. Context help General information The Owner's Manual for Navigation, Enter- General information tainment, and Communication can be ob- The section of the Owner's Manual relating tained as printed book from the service cen- to the function that is currently selected ter. can be displayed directly.

66 Online Edition for Part no. 01402723835 - VI/18 Seite 67

Owner's Manual media AT A GLANCE

Opening via Central Information Programmable memory buttons Display (CID) Change directly to the Options menu from General information the function on the Control Display: The Owner's Manual can be stored on the programmable memory buttons and called 1. Press button. up directly. 2. "Owner's Manual" Storing Opening when a Check Control 1. Select the desired entry point via the message is displayed Central Information Display (CID): Directly from the Check Control message on – "Quick reference" the Control Display: – "Search by pictures" "Owner's Manual" – "Keyword search" – "Animations" Changing between a function and the Owner's Manual 2. Press and hold the desired but- To switch from a function, for instance ton, until a signal sounds. radio, to the Owner's Manual on the Control Display and to alternate between the two Executing displays: Press button. The Owner's Manual is displayed 1. Press the button. immediately. 2. "Owner's Manual" 3. Select the desired page in the Owner's Manual.

4. Press the button again to return to last displayed function.

5. Press the button to return to the page of the Owner's Manual displayed last. To alternate continuously between the last displayed function and the last displayed page of the Owner's Manual, repeat steps 4 & 5. Opens a new display every time.

67 Online Edition for Part no. 01402723835 - VI/18

68 Online Edition for Part no. 01402723835 - VI/18 CONTROLS

Opening and closing ...... 70 Seats, mirrors, and steering wheel ...... 94 Transporting children safely ...... 107 Driving ...... 112 Displays ...... 137 Lights ...... 157 Safety ...... 163 Driving stability control systems ...... 184 Driving comfort ...... 189 Climate control ...... 209 Interior equipment ...... 218 Storage compartments ...... 225 Cargo area ...... 228

69 Online Edition for Part no. 01402723835 - VI/18 Seite 70

CONTROLS Opening and closing

Opening and closing

Vehicle features and options Safety information

This chapter describes all standard, country- WARNING specific and optional features offered with People or animals in the vehicle can lock the series. It also describes features that are the doors from the inside and lock them- not necessarily available in your vehicle, selves in. In this case, the vehicle cannot e. g., due to the selected options or country be opened from the outside. There is a risk versions. This also applies to safety-related of injury. Take the remote control with functions and systems. When using these you so that the vehicle can be opened from functions and systems, the applicable laws the outside. and regulations must be observed.

Remote control WARNING Unlocking from the inside is only possible with special knowledge. General information Persons who spend a lengthy time in the The vehicle is supplied with two remote vehicle while being exposed to extreme controls with integrated key. temperatures are at risk of injury or death. Each remote control contains a replaceable Do not lock the vehicle from the outside battery. Replacing the battery, refer to when there are people in it. page 73. You may set the button functions, depending on the vehicle equipment and country WARNING version. Settings, refer to page 86. Unattended children or animals can cause The vehicle stores personal settings for ev- the vehicle to move and endanger them- ery remote control. Driver profile, refer to selves and traffic, for instance due to the page 83. following actions: The remote controls hold information about – Pressing the Start/Stop button. required maintenance. Service data in the – Releasing the parking brake. remote control, refer to page 285. – Opening and closing the doors or To prevent possible locking in of the remote windows. control, take the remote control with you when exiting the vehicle. – Engaging selector lever position N. – Using vehicle equipment. There is a risk of accidents or injuries. Do not leave children or animals unattended in the vehicle. Take the remote control with you when exiting and lock the vehicle.

70 Online Edition for Part no. 01402723835 - VI/18 Seite 71

Opening and closing CONTROLS

Overview – The interior lights, refer to page 161, and the MINI logo projection are switched on, provided that the interior lights were not switched off manually. – Depending on the settings, the welcome light and headlight courtesy delay feature, refer to page 158, are switched on. – Exterior mirrors folded through convenient closing are folded open. – The alarm system, refer to page 87, is 1 Unlocking switched off. 2 Locking The light functions may depend on the ambient brightness. 3 Unlocking the tailgate With automatic tailgate operation: open Convenient opening the tailgate Press and hold this button on the 4 Panic mode remote control after unlocking. Unlocking The windows and the glass sunroof are opened, as long as the button on the remote Press the button on the remote con- control is pressed. trol. Depending on the settings, refer to Locking page 86, the following access points are 1. Close the driver's door. unlocked. – Driver's door and fuel filler flap. 2. Press button on the remote control. Press the button on the remote control again to unlock the other vehicle access The following functions are executed: points. – All doors, the tailgate, and the fuel filler – All doors, tailgate, and fuel filler flap. flap are locked. In addition, the following functions are exe- – Locking is confirmed by the turn signals cuted: and the horn. This function must be activated in the settings, refer to – Unlocking is confirmed by the turn sig- page 86. nals and the horn. This function must be activated in the settings, refer to – The alarm system, refer to page 87, is page 86. switched on. – The settings stored in the driver profile, If the engine or ignition is still switched on refer to page 83, are applied. when you lock the vehicle, the vehicle horn honks twice. In this case, the engine or ig- – The driver's seat is set to the last posi- nition must be switched off by means of the tion saved in the driver's profile. This Start/Stop button. function must be activated in the settings, refer to page 86.

71 Online Edition for Part no. 01402723835 - VI/18 Seite 72

CONTROLS Opening and closing

With Comfort Access: convenient Depending on the vehicle equipment and closing country version, it is possible to specify whether the tailgate can be operated with Safety information the remote control and how the vehicle doors will respond to this. Adjust the settings, refer to page 86. WARNING With convenient closing, body parts can Safety information be jammed. There is a risk of injury. Make sure that the area of movement of the WARNING doors is clear during convenient closing. Body parts can be jammed when operating the tailgate. There is a risk of injury. Make Closing sure that the area of movement of the tailgate is clear during opening and closing. Press and hold this button on the remote control in the area close to the vehicle. NOTICE The windows and the glass sunroof are The tailgate swings back and up when it closed, as long as the button on the remote opens. There is a risk of damage to prop- control is pressed. erty. Make sure that the area of movement The exterior mirrors are folded in. of the tailgate is clear during opening and closing. Switch on interior lights and courtesy light NOTICE Press button on the remote control with the vehicle locked. Sharp-edged or pointed objects can hit the windows and heat conductors while driv- The MINI logo projection is also switched ing. There is a risk of damage to property. on. Cover the edges and ensure that pointed These functions are not available if the inte- objects do not hit the windows. rior lights were switched off manually. The light functions may depend on the am- Opening bient brightness. Press and hold the button on the re- After locking, wait 10 seconds before press- mote control for approx. 1 second. ing the button again. Without automatic tailgate operation: Tailgate The tailgate is unlocked and can be swung upward. General information With automatic tailgate operation: To avoid locking it in the vehicle, do not The tailgate opens automatically. place the remote control in the cargo area.

72 Online Edition for Part no. 01402723835 - VI/18 Seite 73

Opening and closing CONTROLS

Panic mode 4. Push battery in the direction of the ar- You can trigger the alarm system if you find row using a pointed object and lift it yourself in a dangerous situation. out. – Press button on the remote control and hold for at least 3 seconds. – Briefly press the button on the remote control three times in succession. To switch off the alarm: press any button. Replacing the battery 1. Remove the integrated key from the re- 5. Insert a type CR 2032 battery with the mote control, refer to page 75. positive side facing up. 2. Slide the integrated key into the open- 6. Insert lid and cover. ing and raise the cover. 7. Push the integrated key into the remote The battery compartment is accessible. control until it engages. Have old batteries disposed of by a dealer’s service center or another qualified service center or repair shop or take them to a collection point.

Additional remote controls Additional remote controls are available from a dealer’s service center or another qualified service center or repair shop. 3. Slide the integrated key in the cover of the battery compartment and raise the Loss of the remote controls cover. A lost remote control can be blocked and replaced by a dealer’s service center or another qualified service center or repair shop. Malfunction

General information A Check Control message is displayed. Remote control detection by the vehicle may malfunction under the following circumstances:

73 Online Edition for Part no. 01402723835 - VI/18 Seite 74

CONTROLS Opening and closing

– The battery of the remote control is dis- It is not possible to switch on the drive- charged. Replacing the battery, refer to ready state if the remote control has not page 73. been detected. – Interference of the radio connection Proceed as follows in this case: from transmission towers or other equipment with high transmitting 1. Hold the remote control as shown power. against the marked area on the steering column. Pay attention to the display in – Shielding of the remote control due to the instrument cluster. metal objects. 2. If the remote control is detected: Do not transport the remote control together with metal objects. Start the engine within 10 seconds. – Interference of the radio connection If the remote control is not detected, from mobile phones or other electronic slightly change the position of the remote devices in direct proximity to the re- control and repeat the procedure. mote control. Do not transport the remote control to- Frequently asked questions gether with electronic devices. What precautions can be taken to be able to – Interference of radio transmission by a open a vehicle with an accidentally locked charging process of mobile devices, for in remote control? instance charging of a mobile phone. – The options provided by the Remote – The remote control is in direct proximity Services of the MINI Connected app in- of the wireless charging tray. clude the ability to lock and unlock a vehicle. Place the remote control down at a different location. This requires an active MINI Connected contract and the MINI Connected app In the case of interference, the vehicle can must be installed on a smartphone. be unlocked and locked from the outside with the integrated key, refer to page 74. – Unlocking the vehicle can be requested via the MINI Connected Call Center. Starting the engine via emergency An active MINI Connected contract is detection of the remote control required.

Integrated key

General information The driver's door can be locked and unlocked without remote control using the integrated key.

It is not possible to start the engine if the remote control has not been detected.

74 Online Edition for Part no. 01402723835 - VI/18 Seite 75

Opening and closing CONTROLS

Safety information To do this, slide the integrated key into the opening from below and remove the lid. WARNING Unlocking from the inside is only possible with special knowledge. Persons who spend a lengthy time in the vehicle while being exposed to extreme temperatures are at risk of injury or death. Do not lock the vehicle from the outside when there are people in it.

2. Unlock or lock the door lock using the NOTICE integrated key. The door lock is permanently joined with The other doors must be unlocked or locked the door. The door handle can be moved. from the inside. When pulling the door handle with the integrated key inserted, paint or the integrated key can be damaged. There is a Alarm system risk of damage to property. Remove the The alarm system is not switched on if the integrated key before pulling the outside vehicle is locked with the integrated key. door handle. The alarm system is triggered when the door is opened, if the vehicle has been unlocked via the door lock. In order to stop Removing this alarm, unlock vehicle with the remote control or switch on the ignition, if needed, through emergency detection of the remote control, refer to page 73.

Buttons for the central locking system

General information Press the button, arrow 1, and pull out the integrated key, arrow 2. In the event of a severe accident, the vehicle is automatically unlocked. The hazard warning system and interior lights come on. Locking/unlocking via the door lock 1. Remove lid on the door lock.

75 Online Edition for Part no. 01402723835 - VI/18 Seite 76

CONTROLS Opening and closing

Overview Comfort Access

Concept The vehicle can be accessed without activating the remote control. All you need to do is to have the remote control with you, such as in your pants pocket. The vehicle automatically detects the remote control when it is in close proximity Buttons for the central locking system. or in the car's interior. Locking General information Press the button with the front Comfort Access supports the following doors closed. functions: – Unlocking and locking the vehicle. – The fuel filler flap remains unlocked. – Convenient closing. – The vehicle is not secured against theft when locking. – Open the tailgate. – Opening/closing the tailgate with no- Unlocking touch activation. Press button. This function must be activated in the settings, refer to page 86. This function is not available in vehicles Opening with a trailer hitch or with a rear luggage rack preparation. – Press button to unlock the doors together, and then pull the door handle Functional requirements above the armrest. – To lock the vehicle, the remote control – Front doors: pull the door handle on the must be located outside of the vehicle door to open the door. The other doors near the doors. remain locked. – The next unlocking and locking cycle is – Back doors: pull twice on the door han- not possible until after approx. 2 sec- dle on the door to be opened; the first onds. time unlocks the door, the second time opens it. The other doors remain locked.

76 Online Edition for Part no. 01402723835 - VI/18 Seite 77

Opening and closing CONTROLS

Unlocking Locking

On the driver's or front passenger's outer On the driver's or front passenger's outer door handle, press the button. door handle, press the button. Depending on the settings, refer to page 86, only the driver's door and the Convenient closing fuel filler flap may be unlocked. Unlike when unlocking with the remote control, Safety information pressing the button on the outer door handle again does not unlock the other vehicle WARNING access points. Rather, the vehicle is locked again. With convenient closing, body parts can be jammed. There is a risk of injury. Make If a door of a locked vehicle was opened sure that the area of movement of the from the inside via the door opener, press- doors is clear during convenient closing. ing the button on the outer door handle first locks the vehicle again. To unlock, the button on the outer door handle must be Closing pressed again. This is the case whether the vehicle was locked automatically after driving off or via the central locking system button from the inside.

Press and hold down the button on the driver's or front passenger's outer door handle. In addition to locking, the windows and glass sunroof will be closed. The exterior mirrors are folded in.

77 Online Edition for Part no. 01402723835 - VI/18 Seite 78

CONTROLS Opening and closing

Opening the tailgate Opening

General information If the tailgate is opened via Comfort Access, locked doors are not unlocked. To avoid locking it in the vehicle, do not place the remote control in the cargo area.

Safety information

WARNING Press button next on tailgate. Body parts can be jammed when operating Without automatic tailgate operation: the tailgate. There is a risk of injury. Make The tailgate is unlocked and can be swung sure that the area of movement of the tail- upward. gate is clear during opening and closing. With automatic tailgate operation: The tailgate opens automatically. NOTICE Opening and closing the split doors The tailgate swings back and up when it opens. There is a risk of damage to prop- with no-touch activation erty. Make sure that the area of movement of the tailgate is clear during opening and Concept closing. The tailgate can be opened and closed with no-touch activation using the remote control you are carrying. Two sensors detect a NOTICE forward-directed foot motion in the central rear area and the tailgate is opened or Sharp-edged or pointed objects can hit the closed. windows and heat conductors while driving. There is a risk of damage to property. This function is not available in vehicles Cover the edges and ensure that pointed with a trailer hitch or with a rear luggage objects do not hit the windows. rack preparation. General information To avoid locking it in the vehicle, do not place the remote control in the cargo area. If the remote control is in the sensor area, the tailgate can be opened or closed inad- vertently by an unconscious or alleged recognized foot movement. The sensor has an approximate range of 5 ft/1.50 m extending from the rear of the vehicle.

78 Online Edition for Part no. 01402723835 - VI/18 Seite 79

Opening and closing CONTROLS

If the tailgate is opened with no-touch acti- Contactless closing of the tailgate is vation, locked doors are not unlocked. switched on or off. Contactless opening and closing of the tailgate must be activated in the settings. Performing the foot movement 1. Stand in the middle behind the vehicle Safety information at approx. one arm's length away from the rear of the vehicle. WARNING 2. Wave a foot under the vehicle in the di- During no-touch activation, vehicle parts rection of travel and immediately pull it may be touched, such as the hot exhaust back. With this movement, the leg must gas system. There is a risk of injury. When pass through the ranges of both sensors. moving your foot, make sure you have a firm stance and do not touch the vehicle.

WARNING Body parts can be jammed when operating the tailgate. There is a risk of injury. Make sure that the area of movement of the tailgate is clear during opening and closing. Opening NOTICE Perform the foot movement described ear- lier. The tailgate swings back and up when it opens. There is a risk of damage to prop- Before the opening, the hazard warning sys- erty. Make sure that the area of movement tem flashes. of the tailgate is clear during opening and When the touchless closing is switched on: closing. moving your foot again will stop the opening motion, and moving it one more time after that will close the tailgate. Settings 1. "My MINI" Closing 2. "Vehicle settings" Perform the foot movement described ear- lier. 3. "Doors/Key" Before closing, the hazard warning system 4. "Tailgate" flashes and an acoustic signal sounds. 5. Select desired setting: When the touchless opening is switched on: – "Open by foot movement" moving your foot again will stop the closing Contactless opening of the tailgate is motion, and moving it one more time after switched on or off. that will open the tailgate. – "Close by foot movement"

79 Online Edition for Part no. 01402723835 - VI/18 Seite 80

CONTROLS Opening and closing

Malfunction Safety information Remote control detection by the vehicle may malfunction under the following cir- WARNING cumstances: Body parts can be jammed when operating – The battery of the remote control is dis- the tailgate. There is a risk of injury. Make charged. Replacing the battery, refer to sure that the area of movement of the tail- page 73. gate is clear during opening and closing. – Interference of the radio connection from transmission towers or other equipment with high transmitting NOTICE power. The tailgate swings back and up when it – Shielding of the remote control due to opens. There is a risk of damage to prop- metal objects. erty. Make sure that the area of movement Do not transport the remote control to- of the tailgate is clear during opening and gether with metal objects. closing. – Interference of the radio connection from mobile phones or other electronic devices in direct proximity to the re- NOTICE mote control. Sharp-edged or pointed objects can hit the Do not transport the remote control to- windows and heat conductors while driv- gether with electronic devices. ing. There is a risk of damage to property. Wet or snowy conditions may disrupt the Cover the edges and ensure that pointed locking request recognition function on the objects do not hit the windows. door handles. In the case of a malfunction, unlock and Without automatic tailgate lock the vehicle using the buttons of the remote control or using the integrated key, re- operation fer to page 74. Opening from the outside Tailgate

General information To avoid locking it in the vehicle, do not place the remote control in the cargo area. Depending on the vehicle equipment and country version, it is possible to specify whether the tailgate can be operated with – Without Comfort Access: unlock vehicle. the remote control and how the vehicle doors will respond to this. Adjust the set- With Comfort Access: unlock the vehi- tings, refer to page 86. cle or have the remote control with you. Press button next on tailgate.

80 Online Edition for Part no. 01402723835 - VI/18 Seite 81

Opening and closing CONTROLS

– Press and hold button on the re- With automatic tailgate operation mote control for approx. 1 second. Opening Depending on the setting, the doors may also be unlocked. Unlocking with the re- Adjusting the opening height mote control, refer to page 72. You can set how far the tailgate should The tailgate is unlocked and can be swung open. upward. When adjusting the opening height, ensure that there is a clearance of at least Opening from the inside 4 in/10 cm above the tailgate. With Steptronic transmission: Via the Central Information Display (CID): With the vehicle stationary, pull the 1. "My MINI" button in the storage compartment of the driver's door upwards. 2. "Vehicle settings" If the vehicle is locked, selector lever posi- 3. "Doors/Key" tion P must be engaged first. 4. "Tailgate" With manual transmission: 5. Monitor the tailgate and set the desired opening height. With the vehicle stationary, pull the button in the storage compartment of the From the outside driver's door upwards twice in quick succession.

Closing

– Without Comfort Access: unlock vehicle. With Comfort Access: unlock the vehicle or have the remote control with you. Press the button on tailgate's exterior. Recessed grips on the interior trim of the tailgate can be used to conveniently pull – Press and hold button on the re- down the tailgate. mote control for approx. 1 second. Depending on the setting, the doors may also be unlocked. Unlocking with the remote control, refer to page 72.

81 Online Edition for Part no. 01402723835 - VI/18 Seite 82

CONTROLS Opening and closing

If the vehicle is stationary, the tailgate From the inside opens automatically to the adjusted opening Press and hold the button in the stor- height. age compartment of the driver's door. From the inside The remote control must be located in the With Steptronic transmission: car's interior for this function. Pull button in the storage compart- An acoustic signal sounds before the tail- ment of the driver's door upward. gate is closed. If the vehicle is locked, selector lever posi- From inside the tailgate tion P must be engaged first. Without Comfort Access: With manual transmission: With the vehicle stationary, pull the button in the storage compartment of the driver's door upwards twice in quick succession. If the vehicle is stationary, the tailgate opens automatically to the adjusted opening height.

Interruption of the opening procedure Press button on the inside of the tailgate. The opening procedure is interrupted in the With Comfort Access: following situations: – When the vehicle starts moving. – By pressing the button on the outside of the tailgate. Pressing again closes the tailgate. – By pressing the button on the inside of the tailgate. Pressing again closes the tailgate. – By pressing the button on the remote control. Pressing again continues the – Press button, arrow 1, on the inside of opening motion. the tailgate. – By pressing or pulling the button in the – Press button, arrow 2. storage compartment of the driver's The vehicle will be locked after closing door. Pulling again continues the open- the tailgate. The driver's door must be ing motion. closed for this purpose and the remote control must be outside of the vehicle in Closing the area of the tailgate. From the outside Press the button on tailgate's exterior.

82 Online Edition for Part no. 01402723835 - VI/18 Seite 83

Opening and closing CONTROLS

Interruption of the closing procedure Driver profile The closing procedure is interrupted in the following situations: Concept – If the vehicle starts off with a jerky In the driver profiles, individual settings for movement. several drivers can be stored and called up – By pressing the button on the outside of again when required. the tailgate. Pressing again closes the tailgate. General information – By pressing the button on the inside of There are three driver profiles with which the tailgate. Pressing again closes the personal vehicle settings can be stored. Ev- tailgate. ery remote control has one of these driver – By releasing the button in the storage profiles assigned. compartment of the driver's door. Press- If the vehicle is unlocked using a remote ing again and holding continues the control, the assigned personal driver profile closing motion. will be activated. All settings stored in the driver profile are automatically applied. Malfunction If several drivers use their own remote con- Safety information trol, the vehicle will adjust the personal settings during unlocking. These settings are also restored, if the vehicle has been used in WARNING the meantime by a person with a different With manual operation of a blocked tail- remote control. gate, it can release itself unexpectedly Changes to the settings are automatically from the blockage. There is a risk of injury stored in the driver profile currently acti- or risk of damage to property. Do not oper- vated. ate the tailgate manually if it is blocked. If another driver profile is selected via the Have it checked by a dealer’s service cen- Central Information Display (CID), the set- ter or another qualified service center or tings stored in it will be applied automati- repair shop. cally. The new driver profile is assigned to the remote control currently used. Manual operation There is an additional guest profile available Operate the unlocked tailgate manually with that is not assigned to any remote control: it a slow and smooth motion. can be used to apply settings in the vehicle without changing the personal driver pro- To close the tailgate fully, press down files. lightly only. Closing occurs automatically. Functional requirements For the system to be able to identify the driver profile associated to a particular driver, the detected remote control must be clearly allocated to the driver. This is the case when:

83 Online Edition for Part no. 01402723835 - VI/18 Seite 84

CONTROLS Opening and closing

– The driver is only carrying his or her Via the Central Information Display (CID): own remote control. 1. "My MINI" – The driver unlocks the vehicle. 2. "Driver profiles" – The driver gets into the vehicle through the driver's door. 3. Select driver profile. 4. "OK" Settings – All settings stored in the called-up The settings for the following systems and driver profile are automatically applied. functions are stored in the active profile. – The called-up driver profile is assigned The scope of storable settings depends on to the remote control being used at the country and equipment. time. – Unlocking and locking. – If the driver profile is already assigned – Lights. to a different remote control, this driver – Radio. profile will apply to both remote controls. – Instrument cluster. – Programmable memory buttons. Using a guest profile – Volumes, tone. The guest profile is for individual settings – Control Display. that are stored in none of the three personal – Climate control. driver profiles. – Navigation. Via the Central Information Display (CID): – PDC Park Distance Control. 1. "My MINI" – Rearview camera. 2. "Driver profiles" – Head-up Display. 3. "Drive off (guest)" – MINI Driving Modes. 4. "OK" – Intelligent Safety. The guest profile cannot be renamed. It is – Driver's seat position, exterior mirror not assigned to the current remote control. position. Both the positions saved via the seat Renaming a driver profile memory and the last position set are A personal name can be assigned to the ac- saved. tive driver profile to avoid confusion between the driver profiles. Profile management Via the Central Information Display (CID): Selecting a driver profile 1. "My MINI" Regardless of the remote control in use, a 2. "Driver profiles" different driver profile may be activated. 3. Select driver profile. This allows you to call up personal vehicle The driver profile marked with this settings, even if you did not unlock the ve- symbol can be renamed. hicle with your own remote control. 4. "Change driver profile name"

84 Online Edition for Part no. 01402723835 - VI/18 Seite 85

Opening and closing CONTROLS

5. Enter profile name. Via the Central Information Display (CID): 6. Select the symbol. 1. "My MINI" 2. "Driver profiles" Resetting a driver profile 3. Select the driver profile to overwrite. The settings of the driver profile currently in use are reset to their factory settings. The driver profile marked with this symbol can be overwritten. Via the Central Information Display (CID): 4. "Import driver profile (USB)" 1. "My MINI" Select USB storage device as needed. 2. "Driver profiles" 5. Select the driver profile to be imported. 3. Select driver profile. The driver profile marked with this Displaying driver profiles during start symbol can be reset. The driver profiles can be displayed during 4. "Reset driver profile" each start to select the desired profile. 5. "OK" Via the Central Information Display (CID): 1. "My MINI" Exporting driver profiles 2. "Driver profiles" Most settings of the active driver profile can be exported. 3. "Show driver profiles at startup" Exporting is helpful when storing and retrieving personal settings, for instance be- System limits fore delivering the vehicle to a workshop. A clear assignment between the remote The stored driver profiles can be taken into control and driver may not be possible in another vehicle. the following cases, for example. Via the Central Information Display (CID): – The passenger unlocks the vehicle with his or her own remote control, but an- 1. "My MINI" other person is driving. 2. "Driver profiles" – The driver unlocks the vehicle via Com- 3. Select driver profile. fort Access and has multiple remote The driver profile marked with this controls with him or her. symbol can be exported. – The driver changes, but the vehicle is 4. "Export driver profile (USB)" not locked and unlocked. Select USB storage device as needed. – Multiple remote controls are located outside of the vehicle. Importing driver profiles Profiles stored on a USB storage device can be imported via the USB interface. The existing settings of the active driver profile are overwritten with the settings of the imported driver profile.

85 Online Edition for Part no. 01402723835 - VI/18 Seite 86

CONTROLS Opening and closing

Settings – "Tailgate and door(s)" Depending on your vehicle's optional General information features, the tailgate is either unlocked or opened and the doors un- Depending on the package and country ver- locked. sion, various settings are available for the – "Tailgate opens after unlocking" remote control functions. The vehicle must be unlocked before These settings are stored for the driver pro- the tailgate can be used with the re- file, refer to page 83, currently used. mote control. Unlocking – "Button lock" It is not possible to use the tailgate Doors via the remote control. Via the Central Information Display (CID): Depending on the vehicle equipment and country version, this setting may not be of- 1. "My MINI" fered. 2. "Vehicle settings" Adjusting the last seat and mirror 3. "Doors/Key" position 4. "Driver's door" or "All doors" Via the Central Information Display (CID): 5. Select desired setting: 1. "My MINI" – "Driver's door only" Only the driver's door and the fuel 2. "Driver profiles" filler flap are unlocked. Pressing 3. Select driver profile. again unlocks the entire vehicle. The setting can be made for the – "All doors" driver profile marked with this symbol. The entire vehicle is unlocked. 4. "Last seat position automatic" When the vehicle is unlocked, the driver's Tailgate seat and exterior mirrors resume their last Via the Central Information Display (CID): set positions. 1. "My MINI" The most recent position is independent of the positions saved via the seat memory. 2. "Vehicle settings" 3. "Doors/Key" Automatic locking 4. Via the Central Information Display (CID): The text next to the symbol indicates 1. "My MINI" the current setting. 2. "Vehicle settings" 5. Select desired setting: 3. "Doors/Key" – "Tailgate" 4. Select desired setting: Depending on your vehicle's optional features, the tailgate is either un- – "Lock automatically" locked or opened.

86 Online Edition for Part no. 01402723835 - VI/18 Seite 87

Opening and closing CONTROLS

The vehicle locks automatically after Alarm system a short period of time if no door is opened after unlocking. General information – "Lock after starting to drive" When the vehicle is locked, the vehicle The vehicle locks automatically after alarm system reacts to the following you drive off. changes: Automatic unlocking – Unauthorized opening of a door, the hood or the tailgate. Via the Central Information Display (CID): – Movements in the car's interior. 1. "My MINI" – Changes in the vehicle tilt, e. g., during 2. "Vehicle settings" attempts at stealing a wheel or when 3. "Doors/Key" towing the vehicle. – Disconnected battery voltage. 4. "Unlock at end of trip" – Improper use of the socket for Onboard After the engine is switched off by Diagnosis. pressing the Start/Stop button, the locked vehicle is automatically un- – Locking the vehicle while a device is locked. connected to the socket for the OBD On- board-Diagnosis. Socket for the OBD On- Confirmation signals from the board Diagnosis, refer to page 286. vehicle The alarm system signals these changes vis- ually and acoustically: Via the Central Information Display (CID): – Acoustic alarm: 1. "My MINI" Depending on local regulations, the 2. "Vehicle settings" acoustic alarm may be suppressed. 3. "Doors/Key" – Visual alarm: 4. Deactivate or activate the desired con- By flashing the exterior lighting. firmation signals. – "Flash for lock/unlock" Overview Unlocking is signaled by two flashes, locking by one. – With alarm system: "Acoustic signal for lock/unlock" Unlocking is signaled by one honk of the horn.

Indicator light in the roof fin.

87 Online Edition for Part no. 01402723835 - VI/18 Seite 88

CONTROLS Opening and closing

To switch off the alarm: press any button. Signals of the indicator lights – The indicator light flashes briefly every 2 seconds: The alarm system is switched on. – Indicator light flashes for approx. 10 seconds, then it flashes briefly every Indicator light on the interior mirror. 2 seconds: Interior motion sensor and tilt alarm sensor are not active, as doors, hood, or Switching on/off tailgate are not correctly closed. Cor- When you unlock and lock the vehicle, ei- rectly closed access points are secured. ther with the remote control or with Com- When the still open access points are fort Access, the alarm system is switched closed, interior motion sensor and tilt off and on at the same time. alarm sensor will be switched on. – The indicator light goes out after un- Opening the doors with the alarm locking: system switched on The vehicle has not been tampered with. The alarm system is triggered when a door – The indicator light flashes after unlock- is opened if the door was unlocked using ing until the engine ignition is switched the integrated key in the door lock. on, but no longer than approx. 5 mi- Switching off the alarm, refer to page 89. nutes: An alarm has been triggered. Opening the tailgate with the alarm system switched on Tilt alarm sensor The tailgate can be opened even when the The tilt of the vehicle is monitored. alarm system is switched on. The alarm system responds in situations After the tailgate is closed, it is locked and such as attempts to steal a wheel or when monitored again provided the doors are the vehicle is towed. locked. The hazard warning system flashes once. Interior motion sensor Panic mode The windows and the glass sunroof must be closed for the system to function properly. You can trigger the alarm system if you find yourself in a dangerous situation. Avoiding unintentional alarms – Press button on the remote control and hold for at least 3 sec- General information onds. The tilt alarm sensor and interior motion – Briefly press the button on the remote sensor can trigger an alarm, although no un- control three times in succession. authorized action occurred. Possible situations for an unwanted alarm:

88 Online Edition for Part no. 01402723835 - VI/18 Seite 89

Opening and closing CONTROLS

– In automatic vehicle washes. Safety information – In duplex garages. – During transport on trains carrying ve- WARNING hicles, at sea or on a trailer. When operating the windows, body parts – With animals in the vehicle. and objects can be jammed. There is a risk – When the vehicle is locked after start of of injury or risk of damage to property. fueling. Make sure that the area of movement of The tilt alarm sensor and the interior mo- the windows is clear during opening and tion sensor can be switched off in such sit- closing. uations.

Switching off the tilt alarm sensor and Overview interior motion sensor Press the remote control button again within 10 seconds as soon as the vehicle is locked. The indicator light lights up for approx. 2 seconds and then continues to flash. The tilt alarm sensor and interior motion sensor are switched off until the vehicle is locked again. Power windows. Switching off the alarm Safety switch. – Unlock the vehicle with the remote control or switch on the ignition, if needed through emergency detection of remote Opening control, refer to page 73. – With Comfort Access: If you have the – Press the switch to the resistance remote control with you, unlock the ve- point. hicle using the button on the driver's The window opens while the switch is side or passenger side door. being held.

– Press the switch beyond the resist- Power windows ance point. The window opens automatically. Press- General information ing the switch again stops the motion. If an accident of a certain severity occurs, Convenient opening via the remote control, the windows are automatically closed ex- refer to page 71. cept a gap.

89 Online Edition for Part no. 01402723835 - VI/18 Seite 90

CONTROLS Opening and closing

Closing The window closes with limited jam protection. If the closing force exceeds a – Pull the switch to the resistance specific threshold, closing is inter- point. rupted. The window closes while the switch is being held. 2. Pull the switch past the resistance point again within approx. 4 seconds – Pull the switch beyond the resist- and hold it there. ance point. The window closes without jam protec- The window closes automatically if the tion. door is closed. Pulling the switch again stops the motion. Safety switch Convenient closing via the remote control, refer to page 72. General information Closing via Comfort Access, refer to The safety switch in the driver's door can be page 77. used to prevent children, for instance from opening and closing the rear windows using Jam protection system the switches in the rear. If an accident of a certain severity occurs, General information the safety function is switched off automatically. If the closing force exceeds a specific value as one of the front windows closes, the clos- Switching on/off ing action is interrupted. The window opens slightly. Press button. The LED lights up if the safety func- Safety information tion is switched on.

WARNING Malfunction Accessories on the windows such as an- tennas can impact jam protection. There is General information a risk of injury. Do not install accessories In certain situations a window can only be in the area of movement of the windows. operated to a limited extent. – After a power failure during the opening or closing process, the a window can Closing without the jam protection only be operated to a limited extent. The system system must be initialized in this case. In case of danger from the outside or if ice – The power window motors are equipped might prevent normal closing, proceed as with overheating protection. If a win- follows: dow is opened and closed several times within a short period of time, the over- 1. Pull the switch past the resistance heating protection switches the motor point and hold it there. off temporarily. Depending on the degree of overheating, it may only be pos-

90 Online Edition for Part no. 01402723835 - VI/18 Seite 91

Opening and closing CONTROLS

sible to close the window or it may not Safety information be possible to operate it at all. In this case: allow the power window WARNING motor to cool down. Body parts can be jammed when operating Initializing the system the glass sunroof. There is a risk of injury. Make sure that the area of movement of The system can be initialized when the ve- the glass sunroof is clear during opening hicle is stationary and the engine is run- and closing. ning. During initialization, the affected window closes without jam protection. Overview

WARNING When operating the windows, body parts and objects can be jammed. There is a risk of injury or risk of damage to property. Make sure that the area of movement of the windows is clear during opening and closing.

1. Open the affected window completely. Tilting the glass sunroof 2. Pull the switch to the resistance Press back the switch up to or point and hold. beyond the resistance point The window closes. and release it. 3. Continue holding the switch pulled The glass sunroof is raised. to the resistance point. The window opens and closes once or Opening glass sunroof twice after approx. 15 seconds, depending on the vehicle's equipment. When the glass sunroof is closed 4. Release switch. Press the switch back beyond the resistance point and re- Panoramic glass sunroof lease it twice. The glass sunroof is opened. Pressing the switch again General information stops the motion. In the event of a severe accident, the glass sunroof is automatically closed.

91 Online Edition for Part no. 01402723835 - VI/18 Seite 92

CONTROLS Opening and closing

With the glass sunroof completely Pressing the switch again stops the mo- raised tion. – Slide switch back to the resistance point and hold. With the glass sunroof completely raised The glass sunroof is opened as long as the Press the switch forward be- switch is pressed. yond the resistance point and – Press the switch back beyond the resist- release it. ance point and release it. The glass sunroof is closed. The glass sunroof is opened. Pressing the switch again stops the mo- Jam protection system tion. General information Comfort position If the closing force exceeds a specific value In some models, the wind noises in the car's as a glass sunroof closes, the closing action interior are lowest when the glass sunroof is interrupted. is not fully open. In these models, the automatic function initially only opens the glass The glass sunroof opens slightly. sunroof up to this comfort position. Closing without the jam protection Pressing the switch again opens the glass system sunroof fully. If there is an external danger, proceed as Closing glass sunroof follows:

With the glass sunroof open – Slide switch forward to the resistance point and hold. The glass sunroof is closed as long as the switch is 1. Push the switch forward past the resist- pressed and stops in the ance point and hold it. raised position. The glass sunroof closes with limited – Press the switch forward beyond the re- jam protection. If the closing force ex- sistance point and release it. ceeds a specific threshold, closing is interrupted. The glass sunroof is closed and stops in the raised position. 2. Push the switch forward again past the resistance point and hold until the glass Pressing the switch again stops the mo- sunroof closes without jam protection. tion. Make sure that the closing area is clear. – Press the switch forward beyond the resistance point and release it twice. The glass sunroof is closed.

92 Online Edition for Part no. 01402723835 - VI/18 Seite 93

Opening and closing CONTROLS

Initializing after a power interruption After a power failure during the opening or closing process, the glass sunroof can only be operated to a limited extent. The system must be initialized in this case. MINI recommends having this work performed only by a dealer's service center or another qualified service center or repair shop.

93 Online Edition for Part no. 01402723835 - VI/18 Seite 94

CONTROLS Seats, mirrors, and steering wheel

Seats, mirrors, and steering wheel

Vehicle features and options WARNING This chapter describes all standard, country- With a backrest inclined too far to the specific and optional features offered with rear, the efficacy of the safety belt can no the series. It also describes features that are longer be ensured. There is a risk of slid- not necessarily available in your vehicle, ing under the safety belt in an accident. e. g., due to the selected options or country There is a risk of injuries or danger to life. versions. This also applies to safety-related Adjust the seat prior to starting the trip. functions and systems. When using these Adjust the backrest so that it is in the functions and systems, the applicable laws most upright position as possible and do and regulations must be observed. not adjust again while driving.

Sitting safely WARNING There is a risk of jamming when moving An ideal seating position that meets the the seats. There is a risk of injury or risk needs of the occupants can make a vital of damage to property. Make sure that the contribution to relaxed, fatigue-free driving. area of movement of the seat is clear prior to any adjustment. In the event of an accident, the correct seating position plays an important role. Follow the information in the following chapters: Manually adjustable seats – Seats, refer to page 94. – Safety belts, refer to page 98. Overview – Head restraints, refer to page 100. – Airbags, refer to page 163.

Front seats

Safety information

WARNING 1 Forward/backward Seat adjustments while driving can lead to 2 Thigh support unexpected movements of the seat. Vehi- 3 Height cle control could be lost. There is a risk of an accident. Only adjust the seat on the 4 Backrest tilt driver's side when the vehicle is stationary.

94 Online Edition for Part no. 01402723835 - VI/18 Seite 95

Seats, mirrors, and steering wheel CONTROLS

Forward/backward Lumbar support The curvature of the seat backrest can be adjusted in a way that it supports the lumbar region of the spine. The lower back and the spine are supported for upright posture.

Pull the lever and slide the seat in the desired direction. After releasing the lever, move the seat forward or back slightly making sure it engages properly. Turn the wheel in order to increase or de- crease the curvature. Height Electrically adjustable seats

General information The seat setting for the driver's seat is stored for the profile currently used. When the vehicle is unlocked via the remote control, the position is automatically retrieved if the function, refer to page 86, is activated for this purpose. Pull the lever up or press it down as often as The current seat position can be stored us- needed to reach the desired height. ing the memory function, refer to page 102. Overview Backrest tilt

1 Memory function Pull the lever, and apply your weight to the backrest or lift it off, as necessary. 2 Lumbar support

95 Online Edition for Part no. 01402723835 - VI/18 Seite 96

CONTROLS Seats, mirrors, and steering wheel

3 Backrest tilt Backrest tilt 4 Forward/backward, height, seat tilt

Forward/backward

Move switch forward or backward.

Lumbar support Push switch forward or backward. Concept The curvature of the seat backrest can be Height adjusted in a way that it supports the lumbar region of the spine. The lower back and the spine are supported for upright posture.

Settings – Press the front/rear section of the button: The curvature is increased/decreased. – Press the upper/lower sec- Push switch up or down. tion of the button: The curvature is shifted Seat tilt up/down.

Move switch up or down.

96 Online Edition for Part no. 01402723835 - VI/18 Seite 97

Seats, mirrors, and steering wheel CONTROLS

Thigh support Switching off Press and hold the button, until the LEDs go out.

Rear seats

Safety information

Pull the lever at the front of the seat and ad- WARNING just the thigh support. There is a risk of jamming when folding down the center armrest in the rear. There Front seat heating is a risk of injury. Make sure that the area of movement of the center armrest is clear Overview during folding down.

WARNING Unexpected movements of the rear seat backrest while driving may occur due to unintentional unlocking of the rear seat backrests by the straps. There is a risk of injury. Do not fasten any objects to the straps for unlocking the rear backrests.

Seat heating Forward/backward

Switching on General information Press button once for each tempera- The rear seat is divided at a ratio of 60 to ture level. 40. The left seat is connected to the center section. The maximum temperature is reached when three LEDs are lit. If the trip is continued within approx. 15 minutes after a stop, seat heating is activated automatically with the temperature selected last. When GREEN Mode is activated, refer to page 244, the heater output is reduced.

97 Online Edition for Part no. 01402723835 - VI/18 Seite 98

CONTROLS Seats, mirrors, and steering wheel

Settings The two outer safety belt buckles of the rear seat are intended for the persons sitting on the left and right. The center safety belt buckle of the rear seat is intended for the person sitting in the middle. General information Always make sure that safety belts are being worn by all occupants before driving off. Pull the lever and slide the seat in the de- Although airbags enhance safety by provid- sired direction. ing added protection, they are not a substitute for safety belts. After releasing the lever, move the seat forward or back slightly making sure it en- If needed, disengage the safety belt in the gages properly. rear from the belt buckle on the side. The upper shoulder strap's anchorage point will be correct for adult seat occupants of Backrest tilt every build if the seat is correctly adjusted. Safety information

WARNING Use of a safety belt to buckle more than one person will potentially defeat the ability of the safety belt to serve its protective function. There is a risk of injuries or danger to life. Do not allow more than one per- Pull the strap and apply your weight to the son to wear a single safety belt. Infants backrest or lift it off, as necessary. and children are not allowed on an occu- After the adjustment, move the backrest pant's lap, but must be transported and se- slightly forward or back to engage it cor- cured in designated child restraint sys- rectly. tems.

Safety belts WARNING The efficacy of safety gear, including Number of safety belts and safety safety belts, can be limited or lost when safety belts are fastened incorrectly. An belt buckles incorrectly fastened safety belt can cause The vehicle is fitted with five safety belts to additional injuries, for instance in the ensure occupant safety. However, they can event of an accident or during braking and only offer protection when adjusted cor- evasive maneuvers. There is a risk of inju- rectly. ries or danger to life. Make sure that all

98 Online Edition for Part no. 01402723835 - VI/18 Seite 99

Seats, mirrors, and steering wheel CONTROLS

occupants are wearing safety belts cor- 2. Insert the tongue plate into the safety rectly. belt buckle. The safety belt buckle must engage audibly.

WARNING The efficacy of safety gear, including safety belts, may not be fully functional or fail in the following situations: – The safety belts or safety belt buckles are damaged, soiled, or changed in any other way. – Belt tensioners or belt retractors were modified. Unbuckling the safety belt Safety belts can be imperceptibly damaged in the event of an accident. There is a risk 1. Hold the safety belt firmly. of injuries or danger to life. Do not modify 2. Press the red button in the belt buckle. safety belts, safety belt buckles, belt tensioners, belt retractors or belt anchors and 3. Guide the safety belt back into its roll- keep them clean. Have the safety belts up mechanism. checked after an accident at the dealer’s service center or another qualified service Middle safety belt in the rear center or repair shop. Buckling the safety belt Correct use of safety belts – Wear the safety belt twist-free and tight to your body over your lap and should- ers. – Wear the safety belt deep on your hips over your lap. The safety belt may not press on your stomach. – Do not rub the safety belt against sharp edges, or guide it or jam it in across 1. Pull the buckle tongues out of the hard or fragile objects. mounts in the roof. – Avoid thick clothing. 2. Insert the lower buckle tongue in the – Re-tighten the safety belt frequently up- belt buckle, arrow 1. ward around your upper body. 3. Insert the upper buckle tongue in the belt buckle, arrow 2. Buckling the safety belt Safety belt buckles must audibly click 1. Slowly guide the safety belt out of the into place. holder when fastening it.

99 Online Edition for Part no. 01402723835 - VI/18 Seite 100

CONTROLS Seats, mirrors, and steering wheel

Unbuckling the safety belt – Adjust the head restraint so its center 1. Hold the safety belt firmly. supports the back of the head at as close to eye level as possible. 2. Press the red button in the belt buckle. – Adjust the distance so that the head 3. Use the buckle tongue, arrow 1, to open restraint is as close as possible to the the second safety belt buckle, arrow 2. back of the head. Adjust the distance via the backrest tilt as needed.

WARNING Body parts can be jammed when moving the head restraint. There is a risk of injury. Make sure that the area of movement is clear when moving the head restraint.

4. Guide the safety belt to the mount in the roofliner. WARNING Objects on the head restraint reduce the Safety belt reminder for driver's protective effect in the head and neck seat and front passenger seat area. There is a risk of injury. – Do not use seat or head restraint cov- Display in the instrument cluster ers. The indicator light lights up and a – Do not hang objects, for instance signal sounds. Make sure that the clothes hangers, directly on the head safety belts are positioned correctly. restraint. The safety belt reminder can also be acti- – Only use accessories that have been vated if objects are placed on the front pas- determined to be safe for attachment senger seat. to a head restraint. – Do not use any accessories, for instance pillows, while driving. Front head restraints Adjusting the height: John Cooper Safety information Works sport seat The height of the head restraints cannot be WARNING adjusted. A missing protective effect due to removed or not correctly adjusted head restraints can cause injuries in the head and neck area. There is a risk of injury. – Before driving, install the removed head restraints on the occupied seats.

100 Online Edition for Part no. 01402723835 - VI/18 Seite 101

Seats, mirrors, and steering wheel CONTROLS

Adjusting the height Installing Proceed in the reverse order to install the head restraint.

Rear head restraints

Safety information

WARNING – To lower: press the button, arrow 1, and push the head restraint down. A missing protective effect due to removed or not correctly adjusted head re- – To raise: push the head restraint up. straints can cause injuries in the head and After setting the height, move the head re- neck area. There is a risk of injury. straint up or down slightly, making sure it – Before driving, install the removed engages properly. head restraints on the occupied seats. – Adjust the head restraint so its center Removing: John Cooper Works supports the back of the head at as sport seat close to eye level as possible. The head restraints cannot be removed. – Adjust the distance so that the head restraint is as close as possible to the Removing back of the head. Adjust the distance via the backrest tilt as needed. Only remove the head restraint if no one will be sitting in the seat in question. WARNING Body parts can be jammed when moving the head restraint. There is a risk of injury. Make sure that the area of movement is clear when moving the head restraint.

WARNING Objects on the head restraint reduce the 1. If necessary, fold the rear seat backrest protective effect in the head and neck forward. area. There is a risk of injury. 2. Pull head restraint up as far as possible. – Do not use seat or head restraint cov- 3. Press the button, arrow 1, and pull the ers. head restraint out completely. – Do not hang objects, for instance clothes hangers, directly on the head restraint.

101 Online Edition for Part no. 01402723835 - VI/18 Seite 102

CONTROLS Seats, mirrors, and steering wheel

– Only use accessories that have been Removing determined to be safe for attachment The head restraints cannot be removed. to a head restraint. – Do not use any accessories, for instance pillows, while driving. Memory function

Adjusting the height Concept The following settings can be stored and, if necessary, retrieved using the memory function: – Seat position. – Exterior mirror position. – Height of the Head-up Display. General information – To lower: press the button, arrow 1, and Different settings can be assigned to two push the head restraint down. memory locations. – To raise: push the head restraint up. The adjustment of the lumbar support is not stored. After setting the height, move the head restraint up or down slightly, making sure it engages properly. Safety information

Fold down WARNING There is a risk of jamming when moving the seats. There is a risk of injury or risk of damage to property. Make sure that the area of movement of the seat is clear prior to any adjustment.

WARNING Using the memory function while driving can lead to unexpected movements of the – To fold down: press the button, arrow 1, seat. Vehicle control could be lost. There is and press down the head restraint, ar- a risk of an accident. Only retrieve the row 2. memory function when the vehicle is sta- – Forward: fold the head restraint toward tionary. the front as far as it will go. Make sure that the head restraint engages correctly.

102 Online Edition for Part no. 01402723835 - VI/18 Seite 103

Seats, mirrors, and steering wheel CONTROLS

Overview Mirrors

Exterior mirrors

General information The mirror on the front passenger side is more curved than the driver's side mirror. The mirror setting is stored for the driver profile currently in use. When the vehicle is unlocked via the remote control, the position is automatically retrieved if the func- Storing tion, refer to page 86, is activated for this 1. Switch on the ignition. purpose. 2. Set the desired position. The current exterior mirror position can be stored using the memory function, refer to 3. Press button. The LED in the page 102. button lights up. 4. Press selected button 1 or 2 while the Safety information LED is lit. The LED goes out. WARNING Calling up settings Objects reflected in the mirror are closer The stored position is called up automati- than they appear. The distance to the traf- cally. fic behind could be incorrectly estimated, Press selected button 1 or 2. for instance while changing lanes. There is The procedure stops when a switch for set- a risk of an accident. Estimate the distance ting the seat or one of the memory buttons to the traffic behind by looking over your is pressed. shoulder. While driving, the seat position adjustment on the driver's side is interrupted after a short time. Calling up of a seat position deactivated After a brief period, calling up stored seat positions is deactivated to save battery power. To reactivate calling up of a seat position: – Open or close the door or tailgate. – Press a button on the remote control. – Press the Start/Stop button.

103 Online Edition for Part no. 01402723835 - VI/18 Seite 104

CONTROLS Seats, mirrors, and steering wheel

Overview Folding is only possible up to a speed of approx. 15 mph/20 km/h. Folding the mirrors in and out is helpful in the following situations: – In vehicle washes. – On narrow roads. Mirrors that were folded in are folded out automatically at a speed of approx. 25 mph/40 km/h.

1 Settings Automatic heating 2 Selecting a mirror, Automatic Curb Mon- Both exterior mirrors are automatically itor heated whenever the ignition is switched 3 Folding in and out on. Automatic dimming feature Selecting a mirror The exterior mirror on the driver's side is To change over to the other mirror: automatically dimmed. Photocells in the Slide the switch. car's interior mirror, refer to page 105, are used to control this. Adjusting electrically Automatic Curb Monitor, exterior Press button. mirror The mirror movement follows the button movement. Concept If reverse gear is engaged, the mirror glass Malfunction on the front passenger side is tilted down- In case of an electrical malfunction, adjust ward. This improves your view of the curb the mirror by pressing the edges of the mir- and other low-lying obstacles when parking, ror glass. for instance.

Folding in and out Activating 1. Slide the switch to the driver's NOTICE side mirror position. Depending on the vehicle width, the vehi- 2. Engage selector lever position R. cle can be damaged in vehicle washes. There is a risk of damage to property. Be- Deactivating fore washing, fold in the mirrors by hand or with the button. Slide the switch to the passenger's side mirror position. Press button.

104 Online Edition for Part no. 01402723835 - VI/18 Seite 105

Seats, mirrors, and steering wheel CONTROLS

Interior mirror, manually dimmable Interior mirror, automatic dimming feature Flip lever Overview

To reduce the blinding effect of the interior mirror, flip the lever forward. Photocells are used for control: – In the mirror glass. Turn knob – On the back of the mirror.

Functional requirements – Keep the photocells clean. – Do not cover the area between the interior mirror and the windshield.

Steering wheel Turn the knob to reduce the blinding effect by the interior mirror. Safety information

WARNING Steering wheel adjustments while driving can lead to unexpected steering wheel movements. Vehicle control could be lost. There is a risk of an accident. Adjust the steering wheel while the vehicle is stationary only.

105 Online Edition for Part no. 01402723835 - VI/18 Seite 106

CONTROLS Seats, mirrors, and steering wheel

Settings

1. Fold the lever down. 2. Move the steering wheel to the prefer- red height and angle to suit your seating position. 3. Fold the lever back up.

106 Online Edition for Part no. 01402723835 - VI/18 Seite 107

Transporting children safely CONTROLS

Transporting children safely

The right place for children Safety information designed for the age, weight and size of the child. Children 13 years of age or older must wear a safety belt as soon as a suitable child WARNING restraint system can no longer be used due Unattended children or animals can cause to their age, weight, and size. the vehicle to move and endanger themselves and traffic, for instance due to the Safety information following actions: – Pressing the Start/Stop button. WARNING – Releasing the parking brake. The safety belt cannot be fastened cor- – Opening and closing the doors or rectly on children shorter than 5 ft, windows. 150 cm without suitable additional child – Engaging selector lever position N. restraint systems. The efficacy of safety – Using vehicle equipment. gear, including safety belts, can be limited or lost when safety belts are fastened in- There is a risk of accidents or injuries. Do correctly. An incorrectly fastened safety not leave children or animals unattended belt can cause additional injuries, for in- in the vehicle. Take the remote control stance in the event of an accident or dur- with you when exiting and lock the vehi- ing braking and evasive maneuvers. There cle. is a risk of injuries or danger to life. Se- cure children shorter than 5 ft, 150 cm using suitable child restraint systems. Always transport children in the rear seat Children on the front passenger General information seat Accident research shows that the safest place for children is in the rear seat. General information Transport children younger than 13 years of Before using a child restraint system on the age or shorter than 5 ft/150 cm only in the front passenger seat, ensure that the front, rear seat in suitable child restraint systems knee, and side airbags on the front passen-

107 Online Edition for Part no. 01402723835 - VI/18 Seite 108

CONTROLS Transporting children safely

ger side are deactivated. Automatic deacti- Safety information vation of front-seat passenger airbags, refer to page 165. WARNING Safety information The protective effect of damaged child restraint systems or of child restraint systems exposed to an accident and their fas- WARNING tening systems can be limited or lost. A Active front-seat passenger airbags can in- child can e.g.,not sufficiently restrained, jure a child in a child restraint system for instance in the event of an accident or when the airbags are activated. There is a braking and evasive maneuvers. There is a risk of injury. Make sure that the front- risk of injuries or danger to life. Have dam- seat passenger airbags are deactivated and aged child restraint systems or of child re- that the PASSENGER AIRBAG OFF indica- straint systems exposed to an accident and tor light lights up. their fastening systems checked and possibly replaced by the dealer’s service center or another qualified service center or re- WARNING pair shop. The stability of the child restraint system is limited or compromised with incorrect seat adjustment or improper installation of WARNING the child seat. There is a risk of injuries or The stability of the child restraint system danger to life. Make sure that the child re- is limited or compromised with incorrect straint system fits securely against the seat adjustment or improper installation of backrest. If possible, adjust the backrest the child seat. There is a risk of injuries or tilt for all affected backrests and correctly danger to life. Make sure that the child readjust the seats. Make sure that seats and straint system fits securely against the backrests are securely engaged or locked. backrest. If possible, adjust the backrest If possible, adjust the height of the head tilt for all affected backrests and correctly restraints or remove them. adjust the seats. Make sure that seats and backrests are securely engaged or locked. If possible, adjust the height of the head restraints or remove them. Installing child restraint systems On the rear seats General information If the vehicle is equipped with a sliding rear seat row: move the seats to the rearmost po- Pay attention to the specifications of the sition before mounting a child restraint sys- child restraint system manufacturer when tem. selecting, installing, and using child restraint systems.

108 Online Edition for Part no. 01402723835 - VI/18 Seite 109

Transporting children safely CONTROLS

On the front passenger seat Child seat security

Deactivating airbags

WARNING Active front-seat passenger airbags can in- jure a child in a child restraint system when the airbags are activated. There is a risk of injury. Make sure that the front- seat passenger airbags are deactivated and that the PASSENGER AIRBAG OFF indica- The rear safety belts and the front passen- tor light lights up. ger safety belt can be permanently locked to fasten child restraint systems. After installing a child restraint system in the front passenger seat, make sure that the front, knee and side airbags on the front Locking the safety belt passenger side are deactivated. 1. Pull out the belt strap completely. Deactivate the front-seat passenger airbags 2. Secure the child restraint system with automatically, refer to page 165. the safety belt. 3. Allow the belt strap to be pulled in and Seat position and height pull it tight against the child restraint Before installing a child restraint system, system. The safety belt is locked. move the front passenger seat as far back as possible and adjust its height to the highest Unlocking the safety belt and thus best possible position for the belt 1. Unbuckle the safety belt buckle. and to offer optimal protection in the event of an accident. 2. Remove the child restraint system. If the upper anchorage of the safety belt is 3. Allow the belt strap to be pulled in com- located in front of the belt guide of the child pletely. seat, move the front passenger seat care- In some cases it may be necessary to sepa- fully forward until the best possible belt rate the lower belt attachment. Safety belts, guide position is reached. refer to page 98.

LATCH child restraint fixing system General information Mounts for the lower LATCH LATCH: Lower Anchors and Tether for Chil- anchors dren. The lower anchors may be used to attach Pay attention to the operating and safety in- the CRS to the vehicle seat up to a com- formation of the child restraint system man- bined child and CRS weight of 65 lb/30 kg ufacturer when installing and using LATCH when the child is restrained by the internal child restraint fixing systems. harnesses.

109 Online Edition for Part no. 01402723835 - VI/18 Seite 110

CONTROLS Transporting children safely

Safety information Assembly of LATCH child restraint fixing systems WARNING 1. Install child restraint system, see manu- If the LATCH child restraint fixing sys- facturer's information. tems are not correctly engaged, the protec- 2. Ensure that both LATCH anchors are tive effect of the LATCH child restraint properly connected. fixing system can be limited. There is a risk of injuries or danger to life. Make sure Child restraint systems with tether that the lower anchors are securely en- strap gaged and that the LATCH child restraint fixing system fits securely against the backrest. Safety information

WARNING Position If the upper retaining strap is incorrectly used for the child restraint system, the Symbol Meaning protective effect can be reduced. There is The corresponding symbol a risk of injury. Make sure that the upper shows the mounts for the retaining strap is not guided across sharp lower LATCH anchors. edges and without twisting to the upper Seats equipped with lower retaining strap. anchors are marked with a pair, 2, of LATCH symbols. For vehicles equipped with WARNING a middle seat: If the rear backrest is not locked, the pro- It is not recommended to tective effect of the child restraint system use the inner lower anchors is limited or there is none. In particular of standard outer LATCH situations, for instance braking maneuvers positions to fasten a child or in case of an accident, the rear backrest restraint system on the can fold forward. There is a risk of injuries middle seat. Use the vehicle or danger to life. Make sure that the rear safety belt instead for the backrests are locked. middle seat.

Before installing LATCH child NOTICE restraint fixing systems The anchors for the upper retaining straps of child restraint systems are only pro- Pull the safety belt away from the area of vided for these retaining straps. When the child restraint system. other objects are mounted, the anchors can be damaged. There is a risk of damage to property. Only mount child restraint systems to the upper retaining straps.

110 Online Edition for Part no. 01402723835 - VI/18 Seite 111

Transporting children safely CONTROLS

Anchors Locking the doors and win- The respective symbol shows the an- dows chor for the upper retaining strap. Seats with an upper top tether are marked with this symbol. It can be found on Doors the rear seat backrest or the rear window shelf.

Routing the retaining strap

Push the locking lever on the rear doors up. The door can now be opened from the outside only.

1 Direction of travel Safety switch for the rear 2 Head restraint Press button on the driver's door if 3 Hook for upper retaining strap children are being transported in 4 Anchor the rear. 5 Seat backrest This locks various functions so that they 6 Upper retaining strap cannot be operated from the rear: safety switch, refer to page 90. Attaching the upper retaining strap to the anchor 1. Raise the head restraint, if needed. 2. On the rear seat: Guide the upper retaining strap between or along both sides of the supports of the head restraint to the anchor. 3. Attach the hook of the retaining strap to the anchor on the rear seat. 4. Tighten the retaining strap by pulling it down.

111 Online Edition for Part no. 01402723835 - VI/18 Seite 112

CONTROLS Driving

Driving

Vehicle features and options To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers. This chapter describes all standard, country- specific and optional features offered with the series. It also describes features that are Ignition off not necessarily available in your vehicle, Manual transmission: press the Start/Stop e. g., due to the selected options or country button again without stepping on the clutch versions. This also applies to safety-related pedal. functions and systems. When using these Steptronic transmission: shift to selector functions and systems, the applicable laws lever position P, press the Start/Stop button and regulations must be observed. again without stepping on the brake. All indicator lights in the instrument cluster go out. Start/Stop button To save battery power when the engine is off, switch off the ignition and any unneces- Concept sary electronic systems/power consumers. Pressing the Start/Stop button switches the ignition on or off Safety measures and starts the engine. The ignition is switched off automatically in Steptronic transmission: the the following situations while the vehicle is engine starts in selector lever stationary and the engine is off: position P or N with the brake pedal pressed – When locking the vehicle, and when the when you press the Start/Stop button. low beams are switched on. Manual transmission: the engine starts with – Shortly before the battery is discharged the clutch pedal pressed when the Start/ completely, so that the engine can still Stop button is pressed. be started. This function is only available when the low beams are switched off. Ignition on – When opening or closing the driver Manual transmission: press the Start/Stop door, if the driver's safety belt is un- button without stepping on the clutch buckled and the low beams are switched pedal. off. Steptronic transmission: press the Start/ – While the driver's safety belt is unbuck- Stop button, and do not press on the brake led with driver's door open and low pedal at the same time. beams off. All vehicle systems are ready for operation. – When the front doors are opened if Most of the indicator/warning lights in the there is no other person sitting in the instrument cluster light up for a varied front seats. length of time.

112 Online Edition for Part no. 01402723835 - VI/18 Seite 113

Driving CONTROLS

– The low beams switch to parking lights – Shortly before the battery is discharged after some minutes of no use. completely, so that the engine can still Steptronic transmission with a tap-operated be started. selector lever, refer to page 128: when switching off the ignition, the selector lever position P is engaged automatically if the Starting the engine selector lever position R, D or M/S is engaged. Safety information Radio-ready state DANGER General information If the exhaust pipe is blocked or ventila- In the radio-ready state, certain power con- tion is insufficient, harmful exhaust gases sumers remain ready for operation. can enter into the vehicle. The exhaust gases contain pollutants which are color- Activating less and odorless. In enclosed areas, exhaust gases can also accumulate outside of With the engine running, press the Start/ the vehicle. There is danger to life. Keep Stop button. the exhaust pipe free and ensure sufficient If the engine is not running and the ignition ventilation. is switched on: the system automatically activates radio-ready state when the door is opened if the lights are switched off or the WARNING daytime running lights are switched on. An unsecured vehicle can begin to move The radio-ready state remains active if, for and possibly roll away. There is a risk of an instance the ignition is automatically accident. Before exiting, secure the vehi- switched off for the following reasons: cle against rolling. – Opening or closing the driver's door. In order to ensure that the vehicle is se- – Unfastening of the driver's safety belt. cured against rolling away, follow the fol- – When automatically switching from low lowing: beams to parking lights. – Set the parking brake. – On uphill grades or on a downhill Switching off automatically slope, turn the front wheels in the di- The radio-ready state is switched off auto- rection of the curb. matically in the following situations: – On uphill grades or on a downhill – If the driver's or front passenger door is slope, also secure the vehicle, for in- opened when exiting the vehicle, with stance with a wheel chock. the engine switched off manually. – If the ignition is switched off manually with the Start/Stop button. NOTICE – After approx. 8 minutes. In the case of repeated starting attempts – When the vehicle is locked using the or repeated starting in quick succession, central locking system. the fuel is not burned or is inadequately burned. The catalytic converter can over-

113 Online Edition for Part no. 01402723835 - VI/18 Seite 114

CONTROLS Driving

heat. There is a risk of damage to property. Engine stop Avoid repeated starting in quick succession. Safety information

Gasoline engine WARNING Depending on the motorization, the full Unattended children or animals can cause drive power may not be available for ap- the vehicle to move and endanger them- proximately 30 seconds after starting the selves and traffic, for instance due to the engine. In this case, the vehicle will not ac- following actions: celerate as usual. – Pressing the Start/Stop button. Steptronic transmission – Releasing the parking brake. – Opening and closing the doors or Starting the engine windows. 1. Depress the brake pedal. – Engaging selector lever position N. 2. Engage selector lever position P or N. – Using vehicle equipment. 3. Press the Start/Stop button. There is a risk of accidents or injuries. Do not leave children or animals unattended The ignition is activated automatically for a in the vehicle. Take the remote control brief time and is stopped as soon as the en- with you when exiting and lock the vehi- gine starts. cle. Manual transmission WARNING Starting the engine An unsecured vehicle can begin to move 1. Depress the brake pedal. and possibly roll away. There is a risk of an 2. Press on the clutch pedal and shift to accident. Before exiting, secure the vehi- neutral. cle against rolling. 3. Press the Start/Stop button. In order to ensure that the vehicle is se- The ignition is activated automatically for a cured against rolling away, follow the fol- brief time and is stopped as soon as the en- lowing: gine starts. – Set the parking brake. – On uphill grades or on a downhill slope, turn the front wheels in the direction of the curb. – On uphill grades or on a downhill slope, also secure the vehicle, for instance with a wheel chock.

114 Online Edition for Part no. 01402723835 - VI/18 Seite 115

Driving CONTROLS

Steptronic transmission Engine stop

Switching off the engine Functional requirements 1. When the vehicle is stationary, apply The engine is switched off automatically the parking brake. during a stop under the following condi- 2. Engage selector lever position P. tions: 3. Press the Start/Stop button. Manual transmission: The engine is switched off. – Neutral is engaged and the clutch pedal is not pressed. The radio-ready state is switched on. – The driver's safety belt is buckled or the Manual transmission driver's door is closed. Steptronic transmission: Switching off the engine – The selector lever is in selector lever position D. 1. With the vehicle at a standstill, press the Start/Stop button. – The brake pedal remains depressed while the vehicle is stopped. The engine is switched off. – The driver's safety belt is buckled or the The radio-ready state is switched on. driver's door is closed. 2. Shift into first gear or reverse. In order to be able to release the brake 3. Set the parking brake. pedal, engage the selector lever in position P. The engine remains off. To continue driving depress the brake Auto Start/Stop function pedal. When a gear is engaged, the engine starts automatically. Concept The air flow from the air conditioner is re- The Auto Start/Stop function helps save duced when the engine is switched off. fuel. The system switches off the engine during a stop, for instance in traffic conges- Displays in the instrument cluster tion or at traffic lights. The ignition remains The display indicates that the switched on. The engine starts automati- Auto Start/Stop function is cally for driving off. ready for an Automatic engine After every start of the engine using the start. Start/Stop button, the Auto Start/Stop function is in the last selected state, refer to The display indicates that the page 116. When the Auto Start/Stop func- conditions for an automatic tion is active, it is available when the vehi- engine stop have not been cle is traveling faster than about met. 3 mph/5 km/h. Depending on the selected driving mode, refer to page 186, the system is automatically activated or deactivated.

115 Online Edition for Part no. 01402723835 - VI/18 Seite 116

CONTROLS Driving

Functional limitations Some indicator lights light up for a varied The engine is not switched off automatically length of time. in the following situations: The engine can only be started via the – External temperature too low. Start/Stop button. – The external temperature is high and au- Functional limitations tomatic climate control is running. Even if driving off was not intended, the de- – The car's interior has not yet been activated engine starts up automatically in heated or cooled to the required level. the following situations: – The engine is not yet at operating tem- – Excessive warming of the car's interior perature. when the air conditioning is switched – The wheels are at a sharp angle or the on. steering wheel is being turned. – The steering wheel is turned. – After driving in reverse. – Steptronic transmission: change from – Fogging of the windows when the auto- selector lever position D to R, N or M/S. matic climate control is switched on. – Steptronic transmission: change from – The vehicle battery charge is very low. selector lever position P to R, N, D or – At higher elevations. M/S. – The hood is unlocked. – The vehicle begins rolling. – The parking assistant is activated. – Fogging of the windows when the auto- – Stop-and-go traffic. matic climate control is switched on. – Selector lever in selector lever position – The vehicle battery charge is very low. R, N or M/S. – Excessive cooling of the car's interior when the heating is switched on. Starting the engine – Manual transmission: low brake vacuum The engine starts automatically under the pressure; this can occur, for instance if following conditions: the brake pedal is depressed a number of times in succession. – Manual transmission: clutch pedal is pressed. Switching the system on/off – Steptronic transmission: by releasing the brake pedal. Using the button After the engine starts, accelerate as usual.

Safety mode After the engine switches off automatically, it will not start again automatically if any one of the following conditions are met: – The driver's safety belt is unbuckled and the driver's door is open. – The hood was unlocked.

116 Online Edition for Part no. 01402723835 - VI/18 Seite 117

Driving CONTROLS

Press button. possible to continue driving. Have the system checked by a dealer’s service center or – LED comes on: auto Start/Stop function another qualified service center or repair is deactivated. shop. The engine is started during an automatic engine stop. Parking brake The engine can only be stopped or started via the Start/Stop button. Concept – LED goes out: auto Start/Stop function is activated. The parking brake is used to prevent the vehicle from rolling when it is parked. Switching off the vehicle during an automatic engine stop Safety information During an automatic engine stop, the vehicle can be switched off permanently, for in- WARNING stance when leaving it. An unsecured vehicle can begin to move Steptronic transmission: and possibly roll away. There is a risk of an accident. Before exiting, secure the vehi- 1. Engage selector lever position P. cle against rolling. 2. Press the Start/Stop button. The ignition In order to ensure that the vehicle is se- is switched off. The Auto Start/Stop cured against rolling away, follow the fol- function is deactivated. lowing: 3. Set the parking brake. – Set the parking brake. Manual transmission: – On uphill grades or on a downhill 1. Press the Start/Stop button. The ignition slope, turn the front wheels in the di- is switched off. The Auto Start/Stop rection of the curb. function is deactivated. – On uphill grades or on a downhill 2. Shift into first gear or reverse. slope, also secure the vehicle, for instance with a wheel chock. 3. Set the parking brake. Engine start as usual via Start/Stop button. WARNING Automatic deactivation Unattended children or animals can cause In certain situations, the Auto Start/Stop the vehicle to move and endanger them- function is deactivated automatically for selves and traffic, for instance due to the safety reasons, for instance if no driver is following actions: detected. – Pressing the Start/Stop button. – Releasing the parking brake. Malfunction – Opening and closing the doors or The Auto Start/Stop function no longer windows. switches off the engine automatically. A Check Control message is displayed. It is – Engaging selector lever position N.

117 Online Edition for Part no. 01402723835 - VI/18 Seite 118

CONTROLS Driving

– Using vehicle equipment. Pull the switch and hold it. The vehicle There is a risk of accidents or injuries. Do brakes hard while the switch is being not leave children or animals unattended pulled. in the vehicle. Take the remote control The indicator light lights up red, a with you when exiting and lock the vehi- signal sounds and the brake lights cle. light up. A Check Control message is displayed. Overview If the vehicle is decelerated to a complete stop, the parking brake is engaged. Releasing

Releasing manually 1. Switch on the ignition.

2. Manual transmission: press the switch while the brake pedal is pressed. Parking brake Steptronic transmission: press the switch while the brake is pressed or selector lever position P is set. Setting The LED and indicator light go out. With a stationary vehicle The parking brake is released. Pull the switch. Automatic release in cars with The LED lights up. Steptronic transmission For automatic release, step on the accelera- The indicator light lights up red. The tor pedal. parking brake is set. The LED and indicator light go out. Depending on the stopping situation, the The parking brake is automatically released parking brake is engaged automatically. when you step on the accelerator under the Steptronic transmission: in some parking following conditions: situations, the parking brake is automati- – Engine on. cally engaged, when selector lever posi- – Drive mode engaged. tion P is engaged. In these cases, the parking brake is released automatically when – Driver buckled in and doors closed. you leave the selector lever position P. Automatic release in cars with manual While driving transmission To use as emergency brake while driving: Drive off as usual. The parking brake disen- gages when the clutch pedal is released. The LED and indicator light go out.

118 Online Edition for Part no. 01402723835 - VI/18 Seite 119

Driving CONTROLS

Under the following conditions, the parking Turn signal, high beams, head- brake is automatically released: light flasher – Engine on. – Gear engaged. Turn signal – Driver buckled in and doors closed. – Engine power is sufficient to drive off. Using turn signals Malfunction In the event of a failure or malfunction of the parking brake, secure the vehicle against rolling using a wheel chock, for instance when leaving it. After a power failure

Putting the parking brake into Press the lever past the resistance point. operation Canada: the lever returns into its starting 1. Switch on the ignition. position after actuation. To switch off manually, slightly tap the lever to the resistance 2. Press the switch while stepping on point. the brake pedal or selector lever position P is set. It may take several seconds for the brake to Triple turn signal activation be put into operation. Any sounds associ- Lightly tap the lever up or down. ated with this are normal. The triple turn signal duration can be ad- The indicator light in the instrument justed. cluster goes out as soon as the park- Via the Central Information Display (CID): ing brake is ready for operation. 1. "My MINI" 2. "Vehicle settings" 3. "Lighting" 4. "Exterior lighting" 5. "One-touch turn signal" 6. Select the desired setting. Settings are stored for the profile currently used.

Signaling briefly Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.

119 Online Edition for Part no. 01402723835 - VI/18 Seite 120

CONTROLS Driving

Malfunction Unusually rapid flashing of the indicator NOTICE light indicates that a turn signal bulb has If the wipers are frozen to the windshield, failed. the wiper blades can be torn off and the wiper motor can overheat when switching High beams, headlight flasher on. There is a risk of damage to property. Defrost the windshield prior to switching Push the lever forward or pull it backward. the wipers on.

Switching on

– High beams on, arrow 1. The high beams light up when the low beams are switched on. – High beams off/headlight flasher, ar- Press the lever up until the desired position row 2. is reached. – Resting position of the wipers, position 0. Washer/wiper system – Intermittent operation or rain sensor, position 1. General information – Normal wiper speed, position 2. Do not use the wipers if the windshield is – Fast wiper speed, position 3. dry, as this may damage the wiper blades or When travel is interrupted with the wiper cause them to become worn more quickly. system switched on: when travel continues, the wipers resume at their previous speed. Safety information Switching off and brief wipe WARNING If the wipers start moving in the folded away state, body parts can be jammed or damage may occur to parts of the vehicle. There is a risk of injury or risk of damage to property. Make sure that the vehicle is switched off when the wipers are in the folded away state and the wipers are folded in when switching on.

120 Online Edition for Part no. 01402723835 - VI/18 Seite 121

Driving CONTROLS

Press the lever down. Wiping is started. – Switching off: press the lever down until The LED in the wiper lever is illuminated. it reaches its standard position. If wipers are frozen to windshield, wiper op- – Brief wipe: press the lever down from eration is deactivated. the standard position. The lever automatically returns to its in- Deactivating itial position when released. Press the lever back into the standard posi- Interval mode or rain sensor tion. Setting the frequency or sensitivity of Concept the rain sensor The rain sensor automatically controls the time between wipes depending on the intensity of the rainfall.

General information The sensor is located on the windshield, directly in front of the interior mirror. With- out the rain sensor, the frequency of the wiper operation is preset.

Safety information Turn the thumbwheel. With deactivated rain sensor: set interval. NOTICE With activated rain sensor: set the rain sensor sensitivity. If the rain sensor is activated, the wipers can accidentally start moving in vehicle Up: short interval or high sensitivity of the washes. There is a risk of damage to prop- rain sensor. erty. Deactivate the rain sensor in vehicle Down: long interval or low sensitivity of the washes. rain sensor.

Activating Windshield washer system Safety information

121 Online Edition for Part no. 01402723835 - VI/18 Seite 122

CONTROLS Driving

– Resting position of the wiper, posi- NOTICE tion 0. When the washer fluid reservoir is empty, – Intermittent mode, arrow 1. When re- the wash pump cannot work as intended. verse gear is engaged, the system There is a risk of damage to property. Do switches to continuous operation. not use the washer system when the washer fluid reservoir is empty. Clean the rear window Turn the outer switch in the desired direction. Cleaning the windshield – In resting position: turn the switch downward, arrow 3. The switch automatically returns to its resting position when released. – In intermittent mode: turn the switch further, arrow 2. The switch automatically returns to its intermittent position when released. Fold-away position of the wipers Pull the lever. The system sprays washer fluid on the Concept windshield and activates the wipers briefly. The fold-out position enables the wipers to be folded away from the windshield. Windshield washer nozzles General information The washer jets are automatically heated whenever the ignition is switched on. Helpful when changing the wiper blades or under frosty conditions, for instance. Rear window wiper Safety information Overview WARNING If the wipers start moving in the folded away state, body parts can be jammed or damage may occur to parts of the vehicle. There is a risk of injury or risk of damage to property. Make sure that the vehicle is switched off when the wipers are in the folded away state and the wipers are folded in when switching on.

Switching on the rear window wiper Turn the outer switch upward.

122 Online Edition for Part no. 01402723835 - VI/18 Seite 123

Driving CONTROLS

3. Push wiper lever down. Wipers return NOTICE to their resting position and are ready If the wipers are frozen to the windshield, again for operation. the wiper blades can be torn off and the wiper motor can overheat when switching on. There is a risk of damage to property. Canada: wiper system Defrost the windshield prior to switching the wipers on. General information Do not use the wipers if the windshield is Folding away the wipers dry, as this may damage the wiper blades or cause them to become worn more quickly. 1. Switch the ignition on and off again. 2. Press and hold the wiper level down, un- Safety information til the wipers stop in a close to vertical position. WARNING If the wipers start moving in the folded away state, body parts can be jammed or damage may occur to parts of the vehicle. There is a risk of injury or risk of damage to property. Make sure that the vehicle is switched off when the wipers are in the folded away state and the wipers are folded in when switching on.

3. Fold the wipers all the way away from the windshield. NOTICE If the wipers are frozen to the windshield, the wiper blades can be torn off and the wiper motor can overheat when switching on. There is a risk of damage to property. Defrost the windshield prior to switching the wipers on.

Folding down the wipers After the wipers are folded back down, the wiper system must be reactivated. 1. Fold the wipers back down onto the windshield. 2. Switch on the ignition.

123 Online Edition for Part no. 01402723835 - VI/18 Seite 124

CONTROLS Driving

Switching on Interval mode or rain sensor

Concept The rain sensor automatically controls the time between wipes depending on the intensity of the rainfall.

General information The sensor is located on the windshield, directly in front of the interior mirror. With- Tap up the lever or press it past the resist- out the rain sensor, the frequency of the ance point. wiper operation is preset. – Normal wiper speed: tap up once. Safety information – Fast wiper speed: tap up twice or tap once beyond the resistance point. NOTICE The lever automatically returns to its initial position when released. If the rain sensor is activated, the wipers can accidentally start moving in vehicle Switching off and brief wipe washes. There is a risk of damage to property. Deactivate the rain sensor in vehicle washes.

Activating/deactivating

Press the lever down. – To switch off from fast wiper speed: press down twice. – To switch off from normal wiper speed: press down once. Press the button on the wiper lever. – Brief wipe: press down once. Wiping is started. The lever automatically returns to its initial The LED in the wiper lever is illuminated. position when released. If wipers are frozen to windshield, wiper operation is deactivated. During trip interruption with the rain sensor switched on: if the trip is resumed within approx. 15 minutes, the rain sensor is automatically activated again.

124 Online Edition for Part no. 01402723835 - VI/18 Seite 125

Driving CONTROLS

Setting the frequency or sensitivity of Cleaning the windshield the rain sensor

Pull the lever. Turn the thumbwheel. The system sprays washer fluid on the With deactivated rain sensor: set interval. windshield and activates the wipers briefly. With activated rain sensor: set the rain sensor sensitivity. Windshield washer nozzles Up: short interval or high sensitivity of the The washer jets are automatically heated rain sensor. whenever the ignition is switched on. Down: long interval or low sensitivity of the rain sensor. Rear window wiper

Windshield washer system Overview

Safety information

WARNING The washer fluid can freeze onto the window at low temperatures and obstruct the view. There is a risk of an accident. Only use the washer systems, if the washer fluid cannot freeze. Use washer fluid with antifreeze, if needed. Switching on the rear window wiper Turn the outer switch upward. NOTICE – Resting position of the wiper, position 0. When the washer fluid reservoir is empty, the wash pump cannot work as intended. – Intermittent mode, arrow 1. When re- There is a risk of damage to property. Do verse gear is engaged, the system not use the washer system when the switches to continuous operation. washer fluid reservoir is empty. Clean the rear window Turn the outer switch in the desired direction.

125 Online Edition for Part no. 01402723835 - VI/18 Seite 126

CONTROLS Driving

– In resting position: turn the switch 2. Press the wiper lever up beyond the downward, arrow 3. The switch auto- point of resistance and hold it for ap- matically returns to its resting position prox. 3 seconds, until the wipers remain when released. in a nearly vertical position – In intermittent mode: turn the switch further, arrow 2. The switch automatically returns to its intermittent position when released. Fold-away position of the wipers

Concept The fold-out position enables the wipers to be folded away from the windshield. 3. Fold the wipers all the way away from the windshield. General information Helpful when changing the wiper blades or under frosty conditions, for instance.

Safety information

WARNING If the wipers start moving in the folded away state, body parts can be jammed or damage may occur to parts of the vehicle. There is a risk of injury or risk of damage Folding down the wipers to property. Make sure that the vehicle is After the wipers are folded back down, the switched off when the wipers are in the wiper system must be reactivated. folded away state and the wipers are folded in when switching on. 1. Fold the wipers back down onto the windshield. 2. Switch on the ignition. NOTICE 3. Push wiper lever down. Wipers return If the wipers are frozen to the windshield, to their resting position and are ready the wiper blades can be torn off and the again for operation. wiper motor can overheat when switching on. There is a risk of damage to property. Defrost the windshield prior to switching Washer fluid the wipers on. General information Folding away the wipers All washer nozzles are supplied from one 1. Switch the ignition on and off again. reservoir.

126 Online Edition for Part no. 01402723835 - VI/18 Seite 127

Driving CONTROLS

Use a mixture of tap water and windshield property. Do not add silicon-containing ad- washer concentrate. If desired, a windshield ditives to the washer fluid. washer concentrate containing antifreeze can be used. Recommended minimum fill quantity: NOTICE 0.2 US gal/1 liter. Mixing different windshield washer concentrates or antifreeze can damage the Safety information washing system. There is a risk of damage to property. Do not mix different wind- WARNING shield washer concentrates or antifreeze. Follow the information and mixing ratios Some antifreeze agents can contain harm- provided on the containers. ful substances and are flammable. There is a risk of fire and a risk of injury. Follow the instructions on the containers. Keep Overview antifreeze away from ignition sources. Do not refill operating materials into different bottles. Store operating materials out of reach of children. United States: the washer fluid mixture ratio is regulated by the U.S. EPA and many individual states; do not exceed the allow- able washer fluid dilution ratio limits that apply. Follow the usage instructions on the washer fluid container. Use of BMW’s Windshield Washer Con- The washer fluid reservoir is located in the centrate or the equivalent is recom- engine compartment. mended. Malfunction The use of undiluted windshield washer WARNING concentrate or alcohol-based antifreeze can Washer fluid can ignite and catch fire on lead to incorrect readings at temperatures contact with hot engine parts. There is a below +5 ℉/-15 ℃. risk of injury or risk of damage to property. Only add washer fluid when the engine is cooled down. Next, fully close the Manual transmission lid of the washer fluid reservoir. Safety information

NOTICE WARNING Silicon-containing additives in the washer An unsecured vehicle can begin to move fluid for the water-repelling effect on the and possibly roll away. There is a risk of an windows can lead to damage to the wash- accident. Before exiting, secure the vehi- ing system. There is a risk of damage to cle against rolling.

127 Online Edition for Part no. 01402723835 - VI/18 Seite 128

CONTROLS Driving

In order to ensure that the vehicle is se- Reverse gear cured against rolling away, follow the fol- Select only when the vehicle is stationary. lowing: To overcome the resistance push the gear- – Set the parking brake. shift lever dynamically to the left and en- – On uphill grades or on a downhill gage reverse gear with a forward shifting slope, turn the front wheels in the di- movement. rection of the curb. – On uphill grades or on a downhill Rolling or pushing the vehicle slope, also secure the vehicle, for in- In some situations, the vehicle is to roll stance with a wheel chock. without its own power, for instance in a vehicle wash, or be pushed. NOTICE 1. Switch on the ignition. When shifting to a lower gear, excessive 2. Press on the clutch pedal and shift out speeds can damage the engine. There is a of a forward gear or reverse. risk of damage to property. When shifting 3. Release the parking brake. into 5th or 6th gear, press the gearshift lever to the right. Steptronic transmission Schematic diagram Concept The Steptronic transmission combines the functions of an automatic transmission with the possibility of manual shifting, if needed. Safety information

WARNING An unsecured vehicle can begin to move – 1 – 6: forward gears and possibly roll away. There is a risk of an – R: reverse accident. Before exiting, secure the vehicle against rolling. Shifting In order to ensure that the vehicle is secured against rolling away, follow the fol- General information lowing: Depending on the engine installation, the – Set the parking brake. engine speed during a shifting operation is – On uphill grades or on a downhill adjusted automatically as required for har- slope, turn the front wheels in the di- monious and dynamic gear shifting. rection of the curb.

128 Online Edition for Part no. 01402723835 - VI/18 Seite 129

Driving CONTROLS

– On uphill grades or on a downhill forward or back. The selector lever automat- slope, also secure the vehicle, for in- ically returns to the center position when stance with a wheel chock. released. Selector lever position P is engaged auto- Selector lever version matically, refer to page 129, in certain situations. General information Depending on the vehicle equipment, a Selector lever positions transmission with either a latching selector lever or a tap-operated selector lever is in- Drive mode D stalled. Selector lever position for normal vehicle operation. All gears for forward travel are Transmission with a latching selector activated automatically. lever Reverse R Engage selector lever position R only when the vehicle is stationary.

Neutral N The vehicle may be pushed or roll without engine power in selector lever position N, for instance in vehicle washes, refer to page 131. The selector lever positions P, R, N, and D are selected by moving the selector lever Parking position P into the respective selector lever position. The selector lever engages in the selector General information lever positions. Selector lever position, for instance for parking the vehicle. Transmission with a tap-operated The transmission blocks the drive wheels in selector lever selector lever position P. Engage selector lever position P only when the vehicle is stationary. Before exiting the vehicle, make sure that selector lever position P is set. Otherwise, the vehicle may begin to move.

Automatic parking position for a transmission with a tap-operated selector lever The selector lever positions P, R, N, and D Selector lever position P is engaged auto- are selected by tapping the selector lever matically in situations such as the following:

129 Online Edition for Part no. 01402723835 - VI/18 Seite 130

CONTROLS Driving

– After the engine is switched off when – Unintentional shifting from selector the vehicle is in the radio-ready state, lever position P into another selector refer to page 113, or when the ignition lever position. is switched off, refer to page 112, while 1. To release the selector lever lock: with selector lever position R, D or M/S is en- the brake pedal depressed, press the gaged. button on the front of the selector lever. – If the driver's safety belt is unbuckled, the driver's door is opened, and the brake pedal is not pressed while the vehicle is stationary and selector lever position D, M/S or R is engaged. – After the ignition has been switched off while selector lever position N is engaged. Engaging selector lever positions: 2. Move the selector lever into the desired with a latching selector lever position. General information To prevent the vehicle from creeping after you select a drive mode, maintain pressure on the brake pedal until you are ready to start.

Functional requirements The selector lever can only be taken out of selector lever position P if the ignition is on or the engine is running. Engaging selector lever positions: Engaging selector lever position D, N, with a tap-operated selector lever R, or P General information With the vehicle stationary, depress the brake pedal before shifting out of selector To prevent the vehicle from creeping after lever position P or N; otherwise, the shift you select a drive mode, maintain pressure block will not be deactivated and the shift on the brake pedal until you are ready to command will not be executed. start. A selector lever lock prevents the following Functional requirements faulty operation: Only when the brake pedal is depressed is it – Unintentional shifting into selector possible to change from selector lever posi- lever position P or R. tion P to another selector lever position. Depending on the transmission version, the engine may have to be running too.

130 Online Edition for Part no. 01402723835 - VI/18 Seite 131

Driving CONTROLS

The selection lever position P cannot be Engaging selector lever position P changed until all technical requirements are met.

Engaging selector lever position D, N, R A selector lever lock prevents the following faulty operation: – Unintentional shifting into selector lever position R. – Unintentional shifting from selector Press button P. lever position P into another selector lever position. Rolling or pushing the vehicle 1. Press and hold the button to release the selector lever lock. General information In some situations, the vehicle is to roll without its own power for a short distance, for instance in a vehicle wash, or be pushed.

Engaging selector lever position N: with a latching selector lever 1. Switch on the ignition. 2. If necessary, release the parking brake. 2. With the driver's safety belt fastened, 3. Depress the brake pedal. briefly push the selector lever in the de- 4. Touch the selector lever lock and en- sired direction, past a resistance point, gage selector lever position N. if needed. The selector lever automatically returns to the center position when 5. Release brake. released. The vehicle may roll. If there is a malfunction, you may not be able to change the selector lever position. Manually unlock the transmission lock, if needed, refer to page 134.

Engaging selector lever position N: with a tap-operated selector lever 1. Start the engine while pressing on the brake pedal. 2. If necessary, release the parking brake. 3. Depress the brake pedal.

131 Online Edition for Part no. 01402723835 - VI/18 Seite 132

CONTROLS Driving

4. Touch the selector lever lock and en- Activating the sport program gage selector lever position N. 5. Switch the engine off. In this way, the ignition remains switched on, and a Check-Control message is displayed. The vehicle may roll.

NOTICE Selector lever position P is automatically Press the selector lever to the left out of se- engaged when the ignition is switched off. lector lever position D. There is a risk of damage to property. Do not switch ignition off in vehicle washes. The engaged gear is displayed in the instrument cluster, for instance S1. Irrespective of the ignition, the selector The sport program of the transmission is ac- lever position P is automatically engaged af- tivated. ter approx. 15 minutes. If there is a malfunction, you may not be Ending the Sport program able to change the selector lever position. Push the selector lever to the right. Electronically unlock the transmission lock, D is displayed in the instrument cluster. if needed, refer to page 135. Manual mode M/S Kickdown Kickdown is used to achieve maximum driv- Concept ing performance. Step on the accelerator Manual gear-shifting is possible in manual pedal beyond the resistance point at the full mode. throttle position. Activating manual mode Sport program M/S 1. Press the selector lever to the left out of Concept selector lever position D, arrow 1. The shifting points and shifting times in the Sport program are designed for a sportier driving style. The transmission, for instance shifts up later and the shifting times are shorter.

2. Push the selector lever forward or pull it backward, arrows 2.

132 Online Edition for Part no. 01402723835 - VI/18 Seite 133

Driving CONTROLS

Manual mode M/S becomes active and the paddles from selector lever position D to gear is changed. manual mode M/S. The engaged gear is displayed in the instrument cluster, for instance M1. Ending the manual mode Push the selector lever to the right. Shifting D is displayed in the instrument cluster. – To shift down: press the selector lever forward. Shift paddles for Steptronic Sport – To shift up: pull the selector lever rear- transmission wards. The Steptronic transmission continues Concept shifting automatically in certain situations, The shift paddles on the steering wheel al- for instance when certain engine speed lim- low you to shift gears quickly while keeping its are reached. both hands on the steering wheel. With a tap-operated selector lever: when M2 is set manually while the vehicle is sta- General information tionary, the transmission will no longer shift back to M1. This shifting behavior is Shifting retained until you engage M1 manually or Gears will only be shifted at appropriate en- exit M. gine and road speeds, for instance downshifting is not possible if the engine speed Avoiding automatic upshifting is too high. Once a particular engine speed is attained, M/S manual mode is automatically up- Short-term manual mode shifted as needed. In selector lever position D, actuating a MINI John Cooper Works: once particular shift paddle switches into manual mode engine speeds are attained, upshifting is not temporarily. automatically performed in M/S manual After conservative driving in manual mode mode. without acceleration or shifting via the shift For vehicles with Steptronic Sport transmis- paddles for a certain amount of time, the sion, automatic shift operations are not per- transmission switches back to automatic formed if one of the following conditions is mode. met: It is possible to switch into automatic mode – DSC is deactivated. as follows: – TRACTION is activated. – Pull and hold right shift paddle. In addition, there is no downshifting for – In addition to the briefly pulled right kickdown. shift paddle, briefly pull the left shift With the appropriate transmission version, paddle. the lowest possible gear can be selected by simultaneously activating kickdown and op- Continuous manual mode erating the left shift paddles. This is not In selector lever position S, actuating a shift possible by switching briefly via the shift paddle switches into manual mode permanently.

133 Online Edition for Part no. 01402723835 - VI/18 Seite 134

CONTROLS Driving

Shifting from the center console. To do so, pull the retaining ring upward at the rear edge.

– To shift up: briefly pull right shift paddle. – To shift down: briefly pull left shift pad- 2. Lift the sleeve. Unplug the cable connec- dle. tor, if needed. – The lowest possible gear can be selected 3. Using the screwdriver from the onboard by pulling and holding the left shift pad- vehicle tool kit, refer to page 287, press dle. the yellow release lever downward, see arrow. The selected gear is briefly displayed in the instrument cluster, followed by the current gear.

Displays in the instrument cluster The selector lever position is displayed, for example P.

4. Press the button on the front of the se- Releasing the transmission lock lector lever and move the selector lever manually: with a latching selector back slightly. lever Release the release lever. If the selector lever is locked in selector 5. Bring the selector lever into the desired lever position P despite the ignition being position. switched on, the brake pedal being de- For additional information, see the chapter pressed and the button on the selector lever on tow-starting and towing. being pressed, the transmission lock can be unlocked manually: Before unlocking the transmission lock manually, set the parking brake to prevent the vehicle from rolling away. 1. Loosen the selector lever sleeve, together with the lower retaining ring,

134 Online Edition for Part no. 01402723835 - VI/18 Seite 135

Driving CONTROLS

Releasing the transmission lock Steptronic Sport transmission: electronically: with a tap-operated Launch Control selector lever Concept General information Launch Control enables optimum accelera- Electronically unlock the transmission lock tion on surfaces with good traction under to maneuver vehicle from a danger area. dry surrounding conditions. Before unlocking the transmission lock, set the parking brake to prevent the vehicle General information from rolling away. The use of Launch Control causes premature component wear since this function Engaging selector lever position N represents a very heavy load for the vehicle. Unlocking is possible, if the starter can spin Do not use Launch Control during the the engine. break-in, refer to page 238, period. To start with Launch Control do not steer 1. Press and hold down brake pedal. the steering wheel. 2. Press the Start/Stop button. The starter must audibly start. Functional requirements 3. Press the button on the selector lever, Launch Control is available as soon as the arrow 1, and press and hold the selector engine and transmission are at operating lever into selector lever position N, ar- temperature. row N, until selector lever position N is Depending on the external temperature and displayed in the instrument cluster. driving style, the engine and transmission A Check Control message is displayed. require an interrupted trip of up to 30 miles/50 km in order to reach the operating temperature needed for Launch Con- trol.

Start with launch control While the engine is running:

1. Press button and select SPORT with the MINI Driving Modes switch. 4. Release the selector lever. The instrument cluster displays TRAC- 5. Release brake, as soon as the starter TION in combination with SPORT. The stops. DSC OFF indicator light lights up. 6. Maneuver the vehicle from the danger 2. Engage selector lever position S. area and secure it against moving on its 3. With the left foot, forcefully press down own. on the brake. For additional information, see the chapter 4. Step on the accelerator pedal beyond the on tow-starting and towing. resistance point at the full throttle position, kickdown.

135 Online Edition for Part no. 01402723835 - VI/18 Seite 136

CONTROLS Driving

A flag symbol is displayed in the instrument cluster. 5. The starting engine speed adjusts. Within 3 seconds, release the brake.

Repeated use during a trip After Launch Control has been used, the transmission must cool down for approx. 5 minutes before Launch Control can be used again.

After using Launch Control To increase vehicle stability, activate DSC Dynamic Stability Control again.

System limits An experienced driver may be able to achieve better acceleration values in DSC OFF mode.

136 Online Edition for Part no. 01402723835 - VI/18 Seite 137

Displays CONTROLS

Displays

Instrument cluster

Overview

1 Tachometer 142 4 Fuel gauge 142 2 Indicator/warning lights 5 Display/reset miles 142 3 Speedometer 6 Electronic displays 138

137 Online Edition for Part no. 01402723835 - VI/18 Seite 138

CONTROLS Displays

Electronic displays

1 Driver assistance systems Onboard Computer 147 Messages, for instance Check Control 2 Selector lever position 128 Time 143 Gear shift indicator 145 External temperature 143 3 MINI Driving Modes switch sta- Selection lists 147 tus 186 Total miles/trip odometer 142

Check Control In addition, an acoustic signal may be output and a SMS text message may appear on the Control Display. Concept The Check Control system monitors func- Indicator/warning lights tions in the vehicle and notifies you of malfunctions in the monitored systems. General information The indicator/warning lights can light up in General information a variety of combinations and colors. A Check Control message is displayed as a Several of the lights are checked for proper combination of indicator or warning lights functioning and light up temporarily when and SMS text messages in the instrument the engine is started or the ignition is cluster and in the Head-up Display. switched on.

138 Online Edition for Part no. 01402723835 - VI/18 Seite 139

Displays CONTROLS

Red lights Indicator light flashes: acute warning of the imminent danger of a collision when the ve- Safety belt reminder hicle approaches another vehicle at a rela- tively high differential speed. Indicator light flashes or is illuminated: safety belt on the driver or Intervention by braking or make an evasive passenger side is not buckled. The maneuver. safety belt reminder can also be activated if objects are placed on the front passenger Person warning seat. If a collision with a person detected Make sure that the safety belts are posi- in this way is imminent, the symbol tioned correctly. lights up and a signal sounds.

Airbag system Orange lights Airbag system and belt tensioner are not working. Active Cruise Control Have the vehicle checked immedi- The number bars shows the selected ately by a dealer’s service center or another distance from the vehicle driving qualified service center or repair shop. ahead. Camera-based cruise control, refer to Parking brake page 189. The parking brake is set. Release the parking brake, refer to Vehicle detection, Active Cruise Control page 118. Indicator light illuminates: a vehicle has been detected ahead of you. Brake system Indicator light flashes: the condi- Braking system impaired. Continue tions are not adequate for the system to to drive moderately. work. Have the vehicle checked immedi- The system was deactivated but applies the ately by a dealer’s service center or brakes until you actively resume control by another qualified service center or pressing on the brake pedal or accelerator repair shop. pedal.

Approach control warning Yellow lights Indicator light illuminates: advance Anti-lock Braking System ABS warning is issued, for example when there is the impending danger of a Braking force boost may not be collision or the distance to the vehicle working. Avoid abrupt braking. Take ahead is too small. the longer braking distance into account. Increase distance. Have the system immediately checked by a dealer’s service center

139 Online Edition for Part no. 01402723835 - VI/18 Seite 140

CONTROLS Displays

or another qualified service center or repair – Interference caused by systems or devi- shop. ces with the same radio frequency: after leaving the area of the interference, the DSC Dynamic Stability Control system automatically becomes active again. The indicator light flashes: DSC con- – TPM was unable to complete the reset. trols the drive and braking forces. Reset the system again. The vehicle is stabilized. Reduce speed and modify your driving style to the – A wheel without TPM wheel electronics driving circumstances. is mounted: have it checked by a dealer’s service center or another qualified The indicator light lights up: DSC has mal- service center or repair shop as needed. functioned. – Malfunction: have the system checked Have the system checked by a dealer’s serv- by a dealer’s service center or another ice center or another qualified service cen- qualified service center or repair shop. ter or repair shop. Tire Pressure Monitor, refer to page 167. DSC, refer to page 184. Steering system DSC Dynamic Stability Control is deactivated or DTC Dynamic Traction Steering system in some cases not Control is activated working. DSC is deactivated or DTC is acti- Have the system checked by a deal- vated. er’s service center or another qualified service center or repair shop. DSC, refer to page 184, and DTC, refer to page 185. Emissions Flat Tire Monitor FTM – The warning light lights up: The Flat Tire Monitor signals a loss Emissions are deteriorating. of tire inflation pressure in a tire. Have the vehicle checked as soon as possible. Reduce your speed and stop cautiously. Avoid sudden braking and steering – The warning light flashes under certain maneuvers. circumstances: Flat Tire Monitor, refer to page 172. This indicates that there is excessive misfiring in the engine. Reduce the vehicle speed and have the Tire Pressure Monitor TPM system checked immediately; otherwise, The indicator light lights up: the Tire serious engine misfiring within a brief Pressure Monitor reports a low tire period can seriously damage emission inflation pressure or a flat tire. Fol- control components, in particular the low the information in the Check Control catalytic converter. message. Socket for Onboard Diagnosis, refer to The indicator light flashes and then contin- page 286. uously lights up: no flat tire or loss of tire inflation pressure can be detected.

140 Online Edition for Part no. 01402723835 - VI/18 Seite 141

Displays CONTROLS

Green lights Hiding Check Control messages

Turn signal Turn signal switched on. Unusually rapid flashing of the indicator light indicates that a turn signal bulb has failed. Turn signal, refer to page 119.

Parking lights, headlight Press and hold button on signal lever. Parking lights or headlights are switched on. Continuous display Parking lights/low beams, headlight control, refer to page 157. Some Check Control messages are displayed continuously and are not cleared until the malfunction is eliminated. If several mal- Front fog lights functions occur at once, the messages are Front fog lights are switched on. displayed consecutively. Front fog lights, refer to page 160. The messages can be hidden for approx. 8 seconds. After this time, they are displayed again automatically. High-beam Assistant High-beam Assistant is switched on. Temporary display High beams are switched on and off Some Check Control messages are hidden automatically depending on the traf- automatically after approx. 20 seconds. The fic situation. Check Control messages are stored and can High-beam Assistant, refer to page 159. be displayed again later. Displaying stored Check Control Cruise control messages The system is switched on. It main- Via the Central Information Display (CID): tains the speed that was set using the control elements on the steering 1. "My MINI" wheel. 2. "Vehicle status" 3. "Check Control" Blue lights 4. Select the SMS text message. High beams High beams are switched on. High beams, refer to page 120.

141 Online Edition for Part no. 01402723835 - VI/18 Seite 142

CONTROLS Displays

Display Messages after trip completion Special messages displayed while driving Check Control are displayed again after the ignition is At least one Check Control message switched off. is displayed or is stored. Fuel gauge SMS text messages SMS text messages in combination with a The arrow beside the fuel symbol in the instrument cluster explain a pump symbol shows which Check Control message and the meaning of side of the vehicle the fuel the indicator/warning lights. filler flap is on. Vehicle tilt position may cause Supplementary SMS text messages the display to vary. Additional information, such as on the Information on refueling, refer to page 252. cause of an error or the required action, can be called up via Check Control. The yellow indicator light illumi- With urgent messages the added text will nates, once the fuel reserve is be automatically displayed on the Control reached. Display.

Further help Tachometer Depending on the Check Control message, further help can be selected. Always avoid engine speeds in the red Via the Central Information Display (CID): warning field. In this range, the fuel supply 1. "My MINI" is reduced to protect the engine. 2. "Vehicle status" 3. "Check Control" Odometer and trip odometer 4. Select the desired text message. 5. Select the desired setting. Concept – "Owner's Manual" The total number of kilometers driven and Display additional information about the number of kilometers driven since the the Check Control message in the last reset are displayed in the instrument Integrated Owner's Manual. cluster. – "Service request" Reset the trip odometer Contact a dealer’s service center or another qualified service center or Press the button. repair shop. – The odometer is displayed – "MINI Roadside Assistance" when the ignition is Contact Roadside Assistance. switched off.

142 Online Edition for Part no. 01402723835 - VI/18 Seite 143

Displays CONTROLS

– When the ignition is switched on, the Date trip odometer is reset. The date is displayed in the instrument cluster. External temperature The date can be set via the Central Information Display General information (CID). If the indicator drops to +37 ℉/+3 ℃, a signal sounds. A Check Control message is displayed. Range There is an increased risk of ice on roads. General information Safety information With a low remaining range: – A Check Control message is displayed WARNING briefly. Even at temperatures above +37 ℉/+3 ℃ – The remaining range is shown on the there can be a risk of icy roads, for in- Onboard Computer. stance on bridges or shady sections of – With a dynamic driving style, for in- road. There is a risk of an accident. Modify stance taking curves aggressively, the your driving style to the weather condi- engine function is not always ensured. tions at low temperatures. The Check Control message appears continuously below a range of approx. Display 30 miles/50 km. The external temperature is Safety information displayed in the instrument cluster. NOTICE With a driving range of less than 30 miles/50 km the engine may no longer have sufficient fuel. Engine functions are Time not ensured anymore. There is a risk of damage to property. Refuel promptly. The time is displayed in the instrument cluster. Display The time can be set via the The current range is displayed Central Information Display in the instrument cluster. (CID).

143 Online Edition for Part no. 01402723835 - VI/18 Seite 144

CONTROLS Displays

Displaying the cruising range ing distance or time to the next scheduled Via the Central Information Display (CID): maintenance. A service advisor can read out the current 1. "My MINI" service requirements from your remote con- 2. "System settings" trol. 3. "Displays" Display 4. "Instrument panel" 5. "Range" Detailed information on service requirements More information on the type of service re- Current consumption quired may be displayed on the Control Dis- play. Concept Via the Central Information Display (CID): Displays the current fuel consumption. 1. "My MINI" Check whether you are currently driving in an efficient and environmentally-friendly 2. "Vehicle status" manner. 3. "Service required" Required maintenance procedures and Displaying the current fuel legally mandated inspections are dis- consumption played. Via the Central Information Display (CID): 4. Select an entry to call up detailed information. 1. "My MINI" 2. "System settings" Symbols 3. "Displays" Symbols Description 4. "Instrument panel" No service is currently re- 5. "Current consumption" quired.

The deadline for scheduled Service requirements maintenance or a legally mandated inspection is ap- Concept proaching. The function displays the service require- The service deadline has al- ments and the corresponding maintenance ready passed. scopes. General information Entering appointment dates After the ignition is switched on the instru- Enter the dates for the mandatory vehicle ment cluster briefly displays available driv- inspections.

144 Online Edition for Part no. 01402723835 - VI/18 Seite 145

Displays CONTROLS

Make sure that the vehicle's date and time Manual transmission: displaying are set correctly. Via the Central Information Display (CID): Example Description 1. "My MINI" Fuel efficient gear is set. 2. "Vehicle status" 3. "Service required" Shift into fuel efficient gear. 4. "Vehicle inspection" 5. "Date:" 6. Select the desired setting. Steptronic transmission: displaying

Automatic Service Request Example Description Data regarding the service status or legally Fuel efficient gear is set. mandated vehicle inspections is automatically transmitted to your dealer’s service center before your vehicle is due for serv- Shift into fuel efficient gear. ice. You can check when your dealer’s service center was notified. Via the Central Information Display (CID): Speed Limit Info 1. "My MINI" 2. "Vehicle status" Speed Limit Info 3. "Teleservice Call" Concept Speed Limit Info shows the current maxi- Gear shift indicator mum permitted speed in the instrument cluster.

Concept General information The system recommends the most fuel effi- The camera at the base of the interior mir- cient gear for the current driving situation. ror detects traffic signs at the edge of the road as well as variable overhead sign posts. General information Traffic signs with extra symbols for wet Depending on the vehicle equipment and road conditions, etc., are also detected and country version, the gear shift indicator is compared with the vehicle's onboard data, active in the manual mode of the Steptronic such as from the rain sensor, and will be transmission and with manual transmission. displayed depending on the situation. Suggestions to shift gear up or down are With the navigation system, the system displayed in the instrument cluster. takes into account the information stored in the navigation data and also displays speed limits present on routes without signs.

145 Online Edition for Part no. 01402723835 - VI/18 Seite 146

CONTROLS Displays

Without a navigation system, the system is subject to limitations imposed by technology. Traffic signs with speed limitations are detected and displayed only. Speed limitations due to entering or exiting towns, highway signs, etc. are not displayed. Speed limits with extra text characters are always displayed.

Safety information Press button on the turn signal lever several times, if needed. WARNING Speed Limit Info is displayed on the Info The system cannot serve as a substitute Display in the instrument cluster. for the driver’s personal judgment in as- sessing visibility and traffic situation. Speed Limit Info There is a risk of an accident. Adjust driving style to traffic conditions. Watch traf- The last speed limit detected. fic closely and actively intervene where Without a navigation system appropriate. the traffic signals are grayed out after curves or longer stretches of roadway. Overview With navigation system: Camera Speed Limit Info is not available.

Without navigation system: no speed limit or cancellation is detected.

Speed Limit Info can also be displayed in The camera is installed near the interior the Head-up Display. mirror. Keep the windshield in front of the interior System limits mirror clean and clear. The system may not be fully functional and may provide incorrect information in the Display following situations: – In heavy fog, wet conditions, or snow- Speed Limit Info is displayed via the On- fall. board Computer. – When signs are fully or partially con- cealed by objects, stickers or paint.

146 Online Edition for Part no. 01402723835 - VI/18 Seite 147

Displays CONTROLS

– When driving very close to the vehicle Activating a list and adjusting the in front of you. setting – When driving toward bright lights or strong reflections. Button on the Function – When the windshield in front of the in- steering wheel terior mirror is fogged over, dirty or cov- Move selection up. ered by a sticker, etc. – In the event of incorrect detection by Move selection the camera. down. – If the speed limits stored in the navigation system are incorrect. Confirm the selection. – In areas not covered by the navigation system. – When roads differ from the navigation, Display such as due to changes in road routing. – When passing buses or trucks with a speed sticker. – If the traffic signs are non-conforming. – When signs that are valid for a parallel road are detected. – During calibration of the camera immediately after vehicle delivery.

Selection lists Onboard Computer

General information Concept Depending on the vehicle equipment, the The Onboard Computer displays different buttons on the steering wheel and the dis- vehicle data in the instrument cluster, such play in the instrument cluster can be used as average values. to display or use the following: – Current audio source. – Redial phone feature. – Turn on voice activation system.

147 Online Edition for Part no. 01402723835 - VI/18 Seite 148

CONTROLS Displays

Calling up information on the Info When destination guidance is activated Display in the navigation system. – Speed Limit Info. – Speed. The unit of some information can be changed. Setting units, refer to page 55.

Selecting information Depending on the vehicle equipment, you Press and hold button on signal lever. can select what information from the On- board Computer can be displayed on the Information is displayed in the Info Display Info Display of the instrument cluster. of the instrument cluster. Via the Central Information Display (CID): Information at a glance 1. "My MINI" 2. "System settings" Info Display 3. "Displays" Repeatedly pressing the but- 4. "Instrument panel" ton on the turn signal lever 5. Select the desired setting. calls up the following information in the Info Display: Settings are stored for the profile currently – Range. used. – GREEN Info. Information in detail When GREEN Mode is activated. – Average consumption, fuel. Range – Current consumption, fuel. Displays the estimated cruising range avail- – Average speed. able with the remaining fuel. – Date. The range is calculated based on your driving style over the last 20 miles/30 km. – Engine temperature display. – With equipment version with Head-up GREEN info Display and navigation: The achieved range extension may be dis- Distance to destination. played as a bonus range. When destination guidance is activated in the navigation system. Average fuel consumption – With equipment version with Head-up This is calculated for the period while the Display and navigation: engine is running. Time of arrival. The average fuel consumption is calculated for the distance traveled since the last reset by the Onboard Computer.

148 Online Edition for Part no. 01402723835 - VI/18 Seite 149

Displays CONTROLS

Average speed Display Periods in which the vehicle is parked with the engine manually stopped are not in- cluded in the calculation of the average speed.

Resetting average values

With equipment version with Head-up Display and navigation: distance to destination The distance remaining to the destination is displayed if a destination is entered in the Press and hold button on turn signal lever. navigation system before the trip is started. The distance to the destination is adopted Engine temperature display automatically.

Concept With equipment version with Head-up Display and navigation: time of arrival Displays the current engine temperature, based on a combination of coolant and en- The estimated time of arrival is displayed if gine oil temperature. As soon as the opti- a destination is entered in the navigation mum operating temperature has been at- system before the trip is started. tained, the indicator is in the center The time must be correctly set. position. Speed Limit Info General information Speed Limit Info shows the current maxi- If the engine oil or coolant, and thus the en- mum permitted speed in the instrument gine, become too hot, a Check Control mes- cluster. sage is displayed too. When the engine temperature is too Onboard Computer on the Control high, a red indicator light is dis- Display played. Concept When the engine oil temperature is The Onboard Computer displays different too high, a red indicator light is dis- vehicle data on the Control Display, such as played. average values. Check the coolant level, refer to page 283.

149 Online Edition for Part no. 01402723835 - VI/18 Seite 150

CONTROLS Displays

General information Driving Excitement Two types of Onboard Computers are available on the Control Display: Concept – "Onboard info": average values, such as On the Control Display, sport instruments the fuel consumption, are displayed. The can be displayed, and the vehicle state can values can be reset individually. be checked before the use of the SPORT – "Trip computer": the values deliver an program. overview of a certain distance and can be reset as often as necessary. Sport instruments

Calling up the Onboard Computer or General information trip computer On the Control Display, values for power Via the Central Information Display (CID): and torque are displayed. 1. "My MINI" Displaying sport instruments 2. "Driving information" Via the Central Information Display (CID): 3. "Onboard info" or "Trip computer" 1. "My MINI" Resetting the Onboard Computer 2. "Technology in action" Via the Central Information Display (CID): 3. "Sport displays" 1. "My MINI" 4. "Sports instruments" 2. "Driving information" Via MINI Driving Modes switch: 3. "Onboard info" 1. Activate SPORT. 4. "Consumption" or "Speed" 2. "Sport displays" 5. "OK" 3. "Sports instruments"

Resetting the trip computer Vehicle state Via the Central Information Display (CID): The following vehicle and surrounding area 1. "My MINI" data is automatically checked and evaluated in succession: 2. "Driving information" – Range. 3. "Trip computer" – Engine temperature. 4. Move the Controller to the left, if – External temperature. needed. – SPORT program state. – "Reset": all values are reset. Finally, a total evaluation of the vehicle – "Automatic reset": all values are state is displayed. reset approx. 4 hours after the vehicle has come to a standstill. 5. If necessary, "OK"

150 Online Edition for Part no. 01402723835 - VI/18 Seite 151

Displays CONTROLS

Checking vehicle state Activating/deactivating the speed Via the Central Information Display (CID): warning 1. "My MINI" Via the Central Information Display (CID): 2. "Technology in action" 1. "My MINI" 3. "Sport displays" 2. "Vehicle settings" 4. "Vehicle and surroundings" 3. "Speed warning" Via the MINI Driving Modes switch: 4. "Speed warning" 1. Activate SPORT. Setting your current speed as the 2. "Sport displays" speed warning 3. "Vehicle and surroundings" Via the Central Information Display (CID): 1. "My MINI" Speed warning 2. "Vehicle settings" 3. "Speed warning" Concept 4. "Select current speed" A speed limit can be set that when reached will cause a warning to be issued. LED ring on the central in- General information strument cluster The warning is repeated if the vehicle speed exceeds the set speed limit again, after it has dropped below it by 3 mph/5 km/h. Concept The LED ring displays light animations to Displaying, setting or changing the represent specific functions. speed warning Basic displays Via the Central Information Display (CID): Basic functions, for instance the tachome- 1. "My MINI" ter, can be set to be displayed continually if 2. "Vehicle settings" so desired. 3. "Speed warning" Event displays 4. "Warning at:" Functions that are only displayed tempora- 5. Turn the Controller until the desired rily, for instance the volume or temperature speed is displayed. settings, can be set as event displays. 6. Press the Controller. Several vehicle assistance functions can also be displayed on the LED ring. This display corresponds with the displays of the function in the respective display.

151 Online Edition for Part no. 01402723835 - VI/18 Seite 152

CONTROLS Displays

Example: tachometer Setting the brightness Like the tachometer in the instrument clus- The brightness can be adjusted when night ter, the light animations of the tachometer's lighting is active in the instrument cluster. basic display show the current RPMs and Via the Central Information Display (CID): the respective RPM warning thresholds. 1. "My MINI" Display 2. "System settings" 3. "Displays" 4. "Center Instrument" 5. "Brightness at night" 6. Turn the Controller until the desired brightness is set. 7. Press the Controller. The setting is stored for the driver profile currently used. – Arrow 1: current RPM. – Arrow 2: prewarning field. – Arrow 3: warning field. Head-up Display

Switching on/off LED ring Concept Via the Central Information Display (CID): This system projects important information 1. "My MINI" into the driver's field of vision, for instance the speed. 2. "System settings" The driver can get information without 3. "Displays" averting his or her eyes from the road. 4. "Center Instrument" 5. "Center Instrument" General information Follow the instructions for cleaning the Adjusting the LED ring Head-up Display. For additional information, see the chapter on care. Via the Central Information Display (CID): 1. "My MINI" Safety information 2. "System settings" 3. "Displays" WARNING 4. "Center Instrument" When extending and retracting the projection screen of the Head-up Display, body 5. "Basic display" or "Event display" parts can be jammed. There is a risk of in- 6. Select the desired setting. jury. Make sure that the area of movement of the projection screen is clear during opening and closing.

152 Online Edition for Part no. 01402723835 - VI/18 Seite 153

Displays CONTROLS

– Navigation instructions. NOTICE – Check Control messages. The Head-up Display consists of sensitive – Selection list from the instrument clus- components that can easily be scraped or ter. damaged. There is a risk of damage to – Driver assistance systems. property. Do not place any objects on the Head-up Display, attach to system compo- Some of this information is only displayed nents or plug into the system. Do not briefly as needed. move the moving parts manually. Selecting displays in the Head-up Display Overview Via the Central Information Display (CID): 1. "My MINI" 2. "System settings" 3. "Displays" 4. "Head-Up Display" 5. "Displayed information" 6. Select the desired displays in the Head- up Display. Settings are stored for the driver profile Switching the Head-up Display currently used. on/off When switching on, the projection lens of Setting the brightness the Head-up Display is extended. When The brightness is automatically adjusted to switching off, the projection lens of the the ambient brightness. Head-up Display is retracted again. The basic setting can be adjusted manually. Via the Central Information Display (CID): Via the Central Information Display (CID): 1. "My MINI" 1. "My MINI" 2. "System settings" 2. "System settings" 3. "Displays" 3. "Displays" 4. "Head-Up Display" 4. "Head-Up Display" 5. "Head-Up Display" 5. "Brightness" 6. Turn the Controller until the desired Display brightness is set. Overview 7. Press the Controller. The following information is displayed on When the low beams are switched on, the the Head-up Display: brightness of the Head-up Display can be additionally influenced using the instru- – Speed. ment lighting, refer to page 161.

153 Online Edition for Part no. 01402723835 - VI/18 Seite 154

CONTROLS Displays

The setting is stored for the driver profile – Certain sitting positions. currently used. – Objects on the cover of the Head-up Dis- play. Adjusting the height – Sunglasses with certain polarization fil- Via the Central Information Display (CID): ters. 1. "My MINI" – Wet roads. 2. "System settings" – Unfavorable light conditions. 3. "Displays" 4. "Head-Up Display" John Cooper Works: sport dis- 5. "Height" plays in the Head-up Display 6. Turn the Controller until the desired height is reached. General information 7. Press the Controller. The sport displays in the Head-up Display The setting is stored for the driver profile assist with a sporty driving style. currently used. The height of the Head-up Display can also Switching on be stored using the memory function, refer Via the Central Information Display (CID): to page 102. 1. "My MINI" Setting the rotation 2. "System settings" The screen of the Head-up Display can be 3. "Displays" rotated around its own axis. 4. "Head-Up Display" Via the Central Information Display (CID): 5. "Displayed information" 1. "My MINI" 6. "Sport displays" 2. "System settings" With navigation system: if the sport dis- 3. "Displays" plays are switched on, no navigation con- 4. "Head-Up Display" tent will be displayed on the Head-up Dis- play. 5. "Rotation" 6. Turn the Controller until the desired setting is selected. 7. Press the Controller. The setting is stored for the driver profile currently used.

Display visibility The visibility of the displays in the Head-up Display is influenced by the following factors:

154 Online Edition for Part no. 01402723835 - VI/18 Seite 155

Displays CONTROLS

Display Country timer

Concept The system provides information on how long and to what degree the vehicle was driven on inclined, uneven, unpaved or snow-covered roads, for example. General information The system consists of the following two 1 Speed menus: 2 Shift point indicator – Country Timer: display of the gradient 3 Gear display and unevenness of the routes traveled. 4 Current engine speed – Country Timer Info: display of the best 5 Warning field, speed time and total time since the last reset. Follow the notes on traveling on poor roads, Shift point indicator refer to page 241.

Concept Opening the menu Via the Central Information Display (CID): Shift point indicator in the Head-up Display indicates the optimum shifting point. Thus, 1. "My MINI" with a sporty driving style, the best possible 2. "MINI Country Timer" vehicle acceleration is achieved. 3. Select the desired setting. Functional requirements – : display of the Country Timer. – Steptronic Sport transmission: – : display of the Country Timer Manual mode M/S and, if necessary, Dy- Info. namic Traction Control DTC are activated. Display of the Country Timer – Press the accelerator pedal all the way down. Overview

Display Successive gray illuminated fields indicate the upcoming shift moment. Shift up immediately when the red fields light up. When the maximum possible speed is reached, the entire display flashes. The fuel supply is reduced to protect the engine.

155 Online Edition for Part no. 01402723835 - VI/18 Seite 156

CONTROLS Displays

– Symbols for road gradient and uneven- Vehicle status ness, arrow 1. – Category, arrow 2. General information – Pulse value, arrow 3. The status can be displayed and actions performed for several systems. Symbols, pulse deflection and pulse value Opening the vehicle status When the vehicle is being driven on in- Via the Central Information Display (CID): clined or uneven roads, the corresponding symbol lights up, arrow 1. One or more 1. "My MINI" pulse deflections are displayed and the 2. "Vehicle status" pulse value increases, arrow 3.

Categories Information at a glance As the pulse value increases, the vehicle be- – "Flat Tire Monitor": Status of the Flat comes larger and reaches various levels, ar- Tire Monitor, refer to page 172. row 2. – "Tire Pressure Monitor": Status of the Tire Pressure Monitor, refer to Display of the Country Timer Info page 167. – "Engine oil level": Electronic en- Best time gine oil level check, refer to page 279. The shortest driving time necessary to – "Check Control": Check Control mes- reach the highest level. sages are stored in the background and can be displayed on the Control Display. Total time Displaying stored Check Control messages, refer to page 141. The total driving time that the vehicle was driven at the highest level. – "Service required": Displaying service requirements, refer to page 144. Resetting the Country Timer Info – "Teleservice Call": service request. Via the Central Information Display (CID): 1. "My MINI" 2. "MINI Country Timer" 3. "MINI Country Timer Info" 4. Select desired setting: – "Reset record time and display": resetting the best time. – "Reset total time": resetting the total time.

156 Online Edition for Part no. 01402723835 - VI/18 Seite 157

Lights CONTROLS

Lights

Vehicle features and options Symbol Function Lights off. This chapter describes all standard, country- Daytime running lights. specific and optional features offered with the series. It also describes features that are Parking lights. not necessarily available in your vehicle, e. g., due to the selected options or country versions. This also applies to safety-related Low beams. functions and systems. When using these functions and systems, the applicable laws and regulations must be observed. Instrument lighting.

Overview

Switches in the vehicle Parking lights, low beams and roadside parking lights

General information Position of switch: , , If the driver's door is opened when the ignition is switched off, the exterior lighting is automatically switched off. Parking lights The light switch element is located next to Position of switch: the steering wheel. The vehicle is illuminated on all sides. Symbol Function Do not use the parking lights for extended periods; otherwise, the battery may become Rear fog light. discharged and it would then be impossible to start the engine. Front fog lights. Canada: when parking, switch on the one- sided roadside parking light, refer to page 158. Automatic headlight control. Low beams Cornering light. Position of switch:

157 Online Edition for Part no. 01402723835 - VI/18 Seite 158

CONTROLS Lights

The low beams light up when the ignition is Via the Central Information Display (CID): switched on. 1. "My MINI" Canada: roadside parking light 2. "Vehicle settings" 3. "Lighting" Concept 4. "Exterior lighting" The vehicle can be illuminated on one side. 5. "Welcome lights" Switching on The setting is stored for the driver profile currently used. Headlight courtesy delay feature

General information The low beams stay illuminated for a particular time if the high beams are switched on after radio-ready state is switched off. Canada: the low beams stay illuminated for With radio-ready state switched off, press a particular time if the headlight flasher is the lever either up or down past the resist- switched on after radio-ready state is ance point for approx. 2 seconds. switched off. Setting the duration Switching off Via the Central Information Display (CID): Briefly press the lever to the resistance point in the opposite direction. 1. "My MINI" 2. "Vehicle settings" 3. "Lighting" Welcome lights and headlight 4. "Exterior lighting" courtesy delay feature 5. "Pathway lighting" Welcome lights 6. Set length of time. The setting is stored for the driver profile General information currently used. Depending on the vehicle equipment and the ambient brightness, individual light functions may be switched on briefly when Automatic headlight control the vehicle is unlocked. Concept Activating/deactivating The low beams are switched on and off au- Position of switch: , tomatically depending on the ambient brightness, for instance in tunnels, in twi- light or if there is precipitation.

158 Online Edition for Part no. 01402723835 - VI/18 Seite 159

Lights CONTROLS

General information Cornering light A blue sky with the sun low on the horizon can cause the lights to be switched on. General information Activating Position of switch: In tight curves, for instance on mountain- Position of switch: ous roads or when turning, an additional, The indicator light in the instrument cluster cornering light is switched on that lights up is illuminated when the low beams are the inside of the curve when the vehicle is switched on. moving below a certain speed. The cornering light is automatically System limits switched on depending on the steering an- The automatic headlight control cannot gle or the use of turn signals. serve as a substitute for your personal judgment of lighting conditions. For example, the sensors are unable to de- Adaptive headlight range con- tect fog or hazy weather. In these situa- trol tions, switch the light on manually. The adaptive headlight range control com- pensates for acceleration and braking oper- Daytime running lights ations in order not to blind the oncoming traffic and to achieve optimum illumination General information of the roadway. Position of switch: , , The daytime running lights light up when the ignition is switched on. After the igni- High-beam Assistant tion is switched off, the parking lights light up in position . Concept The high-beam Assistant detects other traf- Activating/deactivating fic participants early on and automatically In some countries, daytime running lights switches the high beams on or off depend- are mandatory, so it may not be possible to ing on the traffic situation. deactivate the daytime running lights. Via the Central Information Display (CID): General information The high-beam Assistant ensures that the 1. "My MINI" high beams are switched on, whenever the 2. "Vehicle settings" traffic situation allows. In the low speed 3. "Lighting" range, the high beams are not switched on by the system. 4. "Exterior lighting" The system responds to light from oncom- 5. Select the desired setting. ing traffic and traffic driving ahead of you, Settings are stored for the remote control and to ambient lighting, for instance in currently used. towns and cities.

159 Online Edition for Part no. 01402723835 - VI/18 Seite 160

CONTROLS Lights

The high beams can be switched on and off – In very unfavorable weather conditions, manually at any time. such as fog or heavy precipitation. – When detecting poorly-lit road users Activating/deactivating such as pedestrians, cyclists, horseback riders and wagons; when driving close to train or ship traffic; or at animal crossings. – In tight curves, on hilltops or in depres- sions, in cross traffic or half-obscured oncoming traffic on highways. – In poorly-lit towns and cities or in the presence of highly reflective signs. – When the windshield in front of the in- Position of switch, depending on the vehicle terior mirror is fogged over, dirty or cov- equipment: , ered with stickers, etc. Press and hold button on signal lever.

The indicator light in the instrument Fog lights cluster is illuminated when the low beams are switched on. Front fog lights The headlights are automatically switched between low beams and high beams. Concept The blue indicator light in the instru- The front fog lights work alongside the low ment cluster lights up when the sys- beams to illuminate a wider area of the tem switches on the high beams. roadway. The high-beam Assistant is deactivated Functional requirement when manually switching the high beams The low beams must be switched on before on and off, refer to page 120. switching on the front fog lights. To reactivate the high-beam Assistant, press the button on the turn signal lever. Switching on/off System limits Press button. The green indicator light lights up if The high-beam Assistant cannot serve as a the front fog lights are switched on. substitute for the driver's personal judgment of when to use the high beams. In sit- If the automatic headlight control, refer to uation that require this, therefore switch off page 158, is activated, the low beams will manually. come on automatically when you switch on The system is not fully functional in the fol- the front fog lights. lowing situations, and driver intervention When the high beams or headlight flasher may be necessary: are activated, the front fog lights are not switched on.

160 Online Edition for Part no. 01402723835 - VI/18 Seite 161

Lights CONTROLS

Instrument lighting Switching the interior lights on/off Press button. Functional requirement The parking lights or low beams must be To switch off permanently: press the button switched on to adjust the brightness. and hold for approx. 3 seconds. Settings Switching the reading lights on and Adjust the brightness with the off manually thumbwheel. Press button.

The reading lights are located in the front next to the interior light. Ambient light Interior lights General information General information Depending on the equipment version, light- Depending on the equipment, the interior ing can be adjusted for some lights in the lights, footwell lights, entry lights, and cour- car's interior. tesy lights are controlled automatically. Thumbwheel for the instrument lighting Activating/deactivating controls brightness of some of these fea- Via the Central Information Display (CID): tures. 1. "My MINI" Overview 2. "Vehicle settings" 3. "Lighting" 4. "Interior lighting" 5. "Ambient lighting" 6. Select the desired setting. Settings are stored for the profile currently used.

Changing color 1 Interior lights Push the switch forward or back: 2 Reading lights manual color change. 3 Ambient light Press the switch forward or backward and hold for approx. 3 seconds, until the ambient light illuminates

161 Online Edition for Part no. 01402723835 - VI/18 Seite 162

CONTROLS Lights

several times: automatic color change. Push the switch again to end color changes.

Setting the brightness Depending on the equipment, the brightness of the ambient light can be adjusted via the thumbwheel for the instrument lighting or on the Control Display. Via the Central Information Display (CID): 1. "My MINI" 2. "Vehicle settings" 3. "Lighting" 4. "Interior lighting" 5. "Brightness" 6. Adjust the brightness.

162 Online Edition for Part no. 01402723835 - VI/18 Seite 163

Safety CONTROLS

Safety

Airbags

1 Front airbag, driver 4 Side airbag 2 Front airbag, front passenger 5 Knee airbag 3 Head airbag

Front airbags Side airbag Front airbags help protect the driver and In a lateral impact, the side airbag supports the front passenger by responding to frontal the side of the body in the chest and lap impacts in which safety belts alone would area. not provide adequate protection.

163 Online Edition for Part no. 01402723835 - VI/18 Seite 164

CONTROLS Safety

Head airbag feet and legs in the floor area and does In a lateral impact, the head airbag supports not support them on the dashboard. the head. – Make sure that occupants keep their heads away from the side airbag. Ejection Mitigation – There should be no additional persons, The head airbag system is designed as an animals or objects between an airbag ejection mitigation countermeasure to re- and a person. duce the likelihood of ejections of vehicle – Dashboard and windshield on the front occupants through side windows during passenger side must stay clear - do not rollovers or side impact events. attach adhesive labels or coverings and do not attach brackets or cables, for in- Knee airbag stance for GPS devices or mobile The knee airbag supports the legs in a fron- phones. tal impact. – Do not apply adhesive materials to the airbag cover panels, do not cover them Protective action or modify them in any way. Airbags are not triggered in every impact – Do not use the cover of the front airbag situation, for instance in less severe acci- on the front passenger side as a storage dents or rear-end collisions. area. – Do not place slip covers, seat cushions Information on optimum effect of the or other objects on the front passenger airbags seat that are not specifically suited for seats with integrated side airbags. – Do not place seat cushions or other ob- WARNING jects on the front seats that are not spe- If the seat position is incorrect or the de- cifically suited for seats with integrated ployment area of the airbags is impaired, side airbags. the airbag system cannot provide protec- – Do not hang pieces of clothing, such as tion as intended and may cause additional jackets, over the backrests. injuries due to triggering. There is a risk of injuries or danger to life. Follow the in- – Never modify either the individual com- formation on achieving the optimum pro- ponents or the wiring in the airbag sys- tective effect of the airbag system. tem. This also applies to steering wheel covers, the dashboard, and the seats. – Keep a distance from the airbags. – Do not remove the airbag system. – Always grasp the steering wheel on the Even when you follow all instructions very steering wheel rim. Hold your hands at closely, injury from contact with the airbags the 3 o'clock and 9 o'clock positions, to cannot be fully ruled out in certain situa- keep the risk of injury to your hands or tions. arms as low as possible when the airbag The ignition and inflation noise may lead to is triggered. short-term and, in most cases, temporary – Make sure that the front passenger is hearing impairment in sensitive occupants. sitting correctly, i.e., keeps his or her Vehicle modifications for a person with dis- abilities may affect the air bag system; con-

164 Online Edition for Part no. 01402723835 - VI/18 Seite 165

Safety CONTROLS

tact MINI Customer Relations for further in- Automatic deactivation of the formation. front-seat passenger airbags Warnings and information on the airbags are also found on the sun visors. Concept The system reads if the front passenger seat Functional readiness of the airbag is occupied by measuring the human body's system resistance. Front, knee, and side airbag on the front Safety information passenger's side are activated or deactivated. WARNING Individual components can be hot after General information triggering of the airbag system. There is a Before transporting a child on the front pas- risk of injury. Do not touch individual senger seat, refer to the safety information components. and instructions for children on the front passenger seat, see Children.

WARNING Safety information Improperly executed work can lead to failure, malfunction or unintentional trigger- WARNING ing of the airbag system. In the case of a To ensure the front-seat passenger airbag malfunction, the airbag system might not function, the system must be able to de- trigger as intended despite the accident tect whether a person is sitting in the severity. There is a risk of injuries or dan- front passenger seat. The entire seat cush- ger to life. Have the airbag system ion area must be used for this purpose. checked, repaired, dismantled and scrap- There is a risk of injuries or danger to life. ped by a dealer’s service center or another Make sure that the front passenger keeps qualified service center or repair shop. his or her feet in the floor area.

Correct function Malfunction of the automatic When the ignition is switched on, deactivation system the warning light in the instrument When transporting older children and cluster lights up briefly and thereby adults, the front-seat passenger airbags may indicates the operational readiness of the be deactivated in certain sitting positions. entire airbag system and the belt tensioner. In this case, the indicator light for the front- seat passenger airbags lights up. Airbag system malfunctioning In this case, change the sitting position so that the front-seat passenger airbags are ac- – Warning light does not come on when tivated and the indicator light goes out. the ignition is switched on. If it is not possible to activate the airbags, – The warning light lights up continu- have the person sit in the rear. ously.

165 Online Edition for Part no. 01402723835 - VI/18 Seite 166

CONTROLS Safety

To enable correct recognition of the occu- Detected child restraint systems pied seat cushion. The system generally detects children – Do not attach covers, cushions, ball mats seated in a child restraint system, particu- or other items to the front passenger larly in child restraint systems required by seat unless they are specifically deter- NHTSA at the point in time when the vehi- mined to be safe for use on the front cle was manufactured. After installing a passenger seat. child restraint system, make sure that the – Do not place any electronic devices on indicator light for the front-seat passenger the front passenger seat if a child re- airbags lights up. This indicates that the straint system is to be installed on it. child restraint system has been detected – Do not place objects under the seat that and the front-seat passenger airbags are not could press against the seat from below. activated. – No moisture in or on the seat. Strength of the driver's and front- Indicator light for the front-seat seat passenger airbag passenger airbags The explosive power that activates driver's/ front-seat passenger airbags very much depends on the positions of the driver's/front passenger seat. To maintain the accuracy of this function over the long-term, calibrate the front seats as soon as a relevant Check Control message is displayed. A message also appears on the Control Display.

Calibrating the front seats The indicator light for the front-seat passenger airbags indicates the operating state of the front-seat passenger airbags. WARNING The light indicates whether the airbags are There is a risk of jamming when moving either activated or deactivated. the seats. There is a risk of injury or risk of damage to property. Make sure that the – The indicator light lights area of movement of the seat is clear prior up when a child is properly to any adjustment. seated in a child restraint system or when the seat is An appropriate Check Control message is empty. The airbags on the displayed. front passenger side are not activated. 1. Move the respective seat all the way forward. – The indicator light does not light up when, for instance a correctly seated 2. Move the respective seat forward again. person of sufficient size is detected on The seat moves forward briefly. the seat. The airbags on the front pas- 3. Readjust the seat to the desired posi- senger side are activated. tion.

166 Online Edition for Part no. 01402723835 - VI/18 Seite 167

Safety CONTROLS

The calibration procedure is completed Status display when the Check Control message disap- pears. Current status If the message continues to be displayed, The system status can be displayed on the repeat the calibration. Control Display, e.g., whether or not the sys- If the message does not disappear after a re- tem is active. peat calibration, have the system checked Via the Central Information Display (CID): as soon as possible. 1. "My MINI" 2. "Vehicle status" Tire Pressure Monitor TPM 3. "Tire Pressure Monitor" The current status is displayed. Concept The system monitors tire inflation pressure Tire conditions in the four mounted tires. The system warns you if there is a significant loss of pressure General information in one or more tires. Tire and system status are indicated by the color of the wheels and a SMS text message General information on the Control Display. Sensors in the tire valves measure the tire inflation pressure and, depending on the All wheels green model, the tire temperature. System is active and will issue a warning re- With use of the system follow further infor- lated to the tire inflation pressures stored mation found under Tire inflation pressure, during the last reset. refer to page 256. One to four yellow wheels Functional requirements A flat tire or major drop in the tire inflation The following conditions must be met for pressure has occurred in the indicated tires. the system; otherwise, reliable flagging of a loss of tire inflation pressure is not assured: Gray wheels – After a tire or wheel replacement, a re- It may not be possible to identify tire infla- set was performed with the correct tire tion pressure losses. inflation pressure. Possible causes: – After the tire inflation pressure was ad- – Malfunction. justed to a new value, a reset was performed. – The system is being reset. – Wheels with TPM wheel electronics. Additonal information The status control display additionally shows the current tire inflation pressures. It shows the actual values read; they may vary depending on driving style or weather conditions.

167 Online Edition for Part no. 01402723835 - VI/18 Seite 168

CONTROLS Safety

Resetting the system equipped with normal tires. Follow the in- Via the Central Information Display (CID): formation on run-flat tires and continued driving with these tires. 1. "My MINI" 2. "Vehicle status" If a tire inflation pressure check is 3. "Tire Pressure Monitor" required 4. Start the engine but do not drive off. Message 5. Reset the tire inflation pressure using "Perform reset". A symbol with a Check Control message appears on the Control Display. 6. Drive away. The wheels are displayed in gray and the Symbol Possible cause following is displayed "Resetting Tire The system has detected a Pressure Monitor…". wheel change, but no reset was After driving faster than 19 mph/30 km/h done. for a short period, the set tire inflation pres- No reset was performed for the sures are accepted as reference values. The system. The system issues a resetting process is completed automati- warning based on the tire infla- cally while driving. tion pressures stored during the After successful completion of the reset, the last reset. tires appear in green on the Control Display Inflation was not carried out ac- and "Tire Pressure Monitor active. See label cording to specifications. for recommended pressures." is displayed. The tire inflation pressure has You may interrupt this trip at any time. fallen below the level of the last When you continue the reset resumes auto- reset. matically. Messages Measure 1. Check the tire pressure and correct as General information needed. A low tire inflation pressure may cause the 2. Reset the system. DSC Dynamic Stability Control to be switched on. If the tire inflation pressure is too low

Safety information Message A yellow warning light is illuminated WARNING in the instrument cluster. A damaged regular tire with low or miss- In addition, a symbol with a Check Control ing tire inflation pressure impacts han- message appears on the Control Display. dling, such as steering and braking response. Run-flat tires can maintain limited stability. There is a risk of an accident. Do not continue driving if the vehicle is

168 Online Edition for Part no. 01402723835 - VI/18 Seite 169

Safety CONTROLS

Symbol Possible cause Measure There is a tire inflation pressure 1. Reduce your speed and stop cautiously. loss. Avoid sudden braking and steering maneuvers. No reset was performed for the system. The system issues a 2. Check whether the vehicle is fitted with warning based on the tire infla- normal tires or run-flat tires. tion pressures stored during the Run-flat tires, refer to page 264, are la- last reset. beled with a circular symbol containing the letters RSC marked on the tire's Measure sidewall. 1. Reduce your speed and drive moder- Actions in the event of a flat tire ately. Do not exceed a speed of 80 mph/130 km/h. Normal tires 2. At the next opportunity, for instance gas 1. Identify the damaged tire. station, check and correct the tire inflation pressure in all four tires, if neces- To do this, check the tire inflation pres- sary. sure in all four tires, for instance using the tire pressure gage of a flat tire kit. 3. Reset the system. If the tire inflation pressure in all four If there is a significant loss of tire tires is correct, the Tire Pressure Moni- inflation pressure tor may not have been reset. In this case, perform the reset. Message If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor A yellow warning light is illuminated may not have been initialized. In this in the instrument cluster. case, initialize the system. In addition, a symbol with the affected tire If identification of flat tire damage is appears in a Check Control message on the not possible, please contact a dealer’s Control Display. service center or another qualified service center or repair shop. Symbol Possible cause 2. Repair the flat tire, e.g., with a flat tire There is a flat tire or a major kit or by changing the wheel. loss in tire inflation pressure. Use of sealant, for instance from the flat tire No reset was performed for the kit, may damage the TPM wheel electronics. system. The system issues a In this case, have the electronics checked warning based on the tire infla- and replaced at the next opportunity. tion pressures stored during the last reset.

169 Online Edition for Part no. 01402723835 - VI/18 Seite 170

CONTROLS Safety

Run-flat tires the distance for which it may be safe to drive may be up to 50 miles/80 km. Safety information Vehicle handling with damaged tires WARNING Vehicles driven with a damaged tire will handle differently, potentially leading to Your vehicle handles differently with a conditions such as the following: run-flat with no or low inflation pressure; for instance, your lane stability when – Greater likelihood of swerving off braking is reduced, braking distances are course. longer and the self-steering properties will – Longer braking distances. change. There is a risk of an accident. – Changed self-steering properties. Drive moderately and do not exceed a Modify your driving style. Avoid abrupt speed of 50 mph/80 km/h. steering maneuvers or driving over obstacles, for instance curbs or potholes. Maximum speed Final tire failure You may continue driving with a damaged tire at speeds up to 50 mph/80 km/h. Vibrations or loud noises while driving can indicate the final failure of a tire. Continued driving with a flat tire Reduce speed and stop; otherwise, pieces of If continuing to drive with a damaged tire: the tire could come loose and cause an accident. 1. Avoid sudden braking and steering ma- Do not continue driving. Contact a dealer’s neuvers. service center or another qualified service 2. Do not exceed a speed of center or repair shop. 50 mph/80 km/h. 3. Check the tire inflation pressure in all System limits four tires at the next opportunity. If the tire inflation pressure in all four Temperature tires is correct, the Tire Pressure Moni- The tire inflation pressure depends on the tor may not have been reset. In this tire's temperature. case, perform the reset. Driving or exposure to the sun will increase the tire's temperature, thus increasing the Possible driving range with a tire inflation pressure. depressurized tire The tire inflation pressure is reduced when The distance for which it may be possible to the tire temperature falls again. drive safely varies depending on how the These circumstances may cause a warning vehicle is loaded and used, e.g., speed, road when temperatures fall very sharply. conditions, external temperature. The driving range may be less but may also be more if an economical driving style is used. Sudden tire pressure loss If the vehicle is loaded with an average The system cannot indicate sudden serious weight and used under favorable conditions, tire damage caused by external circumstances.

170 Online Edition for Part no. 01402723835 - VI/18 Seite 171

Safety CONTROLS

Failure to perform a reset feature, your vehicle has been equipped The system does not function properly if a with a tire pressure monitoring system reset has not been carried out, for instance (TPMS) that illuminates a low tire pressure a flat tire is reported though tire inflation telltale when one or more of your tires is pressures are correct. significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires Malfunction as soon as possible, and inflate them to the The yellow warning light flashes and proper pressure. Driving on a significantly is then illuminated continuously. A under-inflated tire causes the tire to over- Check Control message is displayed. heat and can lead to tire failure. Under-infla- It may not be possible to identify tire pres- tion also reduces fuel efficiency and tire sure losses. tread life, and may affect the vehicle's han- Examples and recommendations in the fol- dling and stopping ability. Please note that lowing situations: the TPMS is not a substitute for proper tire – A wheel without TPM wheel electronics, maintenance, and it is the driver's responsi- for instance an emergency wheel, is bility to maintain correct tire pressure, even mounted: have it checked by a dealer’s if under-inflation has not reached the level service center or another qualified serv- to trigger illumination of the TPMS low tire ice center or repair shop as needed. pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indica- – Malfunction: have system checked by a tor to indicate when the system is not oper- dealer’s service center or another quali- ating properly. The TPMS malfunction indi- fied service center or repair shop. cator is combined with the low tire pressure – The system was unable to complete the telltale. When the system detects a mal- reset. Perform a system reset again. function, the telltale will flash for approxi- – Interference caused by systems or devi- mately one minute and then remain contin- ces with the same radio frequency: after uously illuminated. This sequence will leaving the area of the interference, the continue upon subsequent vehicle start-ups system automatically becomes active as long as the malfunction exists. When the again. malfunction indicator is illuminated, the system may not be able to detect or signal Declaration according to NHTSA/ low tire pressure as intended. TPMS mal- FMVSS 138 Tire Pressure Monitoring functions may occur for a variety of rea- System sons, including the installation of replacement or alternate tires or wheels on the Each tire, including the spare (if provided) vehicle that prevent the TPMS from func- should be checked monthly when cold and tioning properly. Always check the TPMS inflated to the inflation pressure recom- malfunction telltale after replacing one or mended by the vehicle manufacturer on the more tires or wheels on your vehicle to en- vehicle placard or tire inflation pressure la- sure that the replacement or alternate tires bel. (If your vehicle has tires of a different and wheels allow the TPMS to continue to size than the size indicated on the vehicle function properly. placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety

171 Online Edition for Part no. 01402723835 - VI/18 Seite 172

CONTROLS Safety

FTM Flat Tire Monitor – After the tire inflation pressure has been adjusted. Concept – After a tire or wheel replacement. The system detects tire inflation pressure Performing initialization loss on the basis of rotation speed differences between the individual wheels while When initializing, the set tire inflation driving. pressures serve as reference values in order to detect a flat tire. Initialization is started In the event of a tire inflation pressure loss, by confirming the tire inflation pressures. the diameter and therefore the rotational speed of the corresponding wheel changes. Do not initialize the system when driving The difference will be detected and reported with snow chains. as a flat tire. Via the Central Information Display (CID): The system does not measure the actual in- 1. "My MINI" flation pressure in the tires. 2. "Vehicle status" Functional requirements 3. "Flat Tire Monitor" The following conditions must be met for 4. Start the engine but do not drive off. the system; otherwise, reliable flagging of a 5. Start the initialization with: "Perform loss of tire inflation pressure is not assured: reset". – After a tire or wheel replacement, an ini- 6. Drive away. tialization was performed with the correct tire inflation pressure. The initialization is completed while driving, which can be interrupted at any time. – After the tire inflation pressure was adjusted to a new value, an initialization The initialization automatically continues was performed. when driving resumes. Status display Messages The current status of the flat tire monitor General information can be displayed, for instance whether the RPA is active. When a flat tire is indicated, DSC Dynamic Stability Control is switched on, if needed. Via the Central Information Display (CID): 1. "My MINI" Safety information 2. "Vehicle status" 3. "Flat Tire Monitor" WARNING The status is displayed. A damaged regular tire with low or missing tire inflation pressure impacts han- Initialization required dling, such as steering and braking response. Run-flat tires can maintain limited An initialization must be performed in the stability. There is a risk of an accident. Do following situations: not continue driving if the vehicle is equipped with normal tires. Follow the in-

172 Online Edition for Part no. 01402723835 - VI/18 Seite 173

Safety CONTROLS

formation on run-flat tires and continued If identification of flat tire damage is driving with these tires. not possible, please contact a dealer’s service center or another qualified service center or repair shop. Indication of a flat tire 2. Repair the flat tire, e.g., with a flat tire A yellow warning light is illuminated kit or by changing the wheel. in the instrument cluster. Use of sealant, for instance from the flat tire kit, may damage the TPM wheel electronics. In addition, a symbol with a Check Control In this case, have the electronics checked message appears on the Control Display. and replaced at the next opportunity. Symbol Possible cause Run-flat tires There is a flat tire or a major loss in tire inflation pressure. Safety information

Measure WARNING 1. Reduce your speed and stop cautiously. Your vehicle handles differently with a Avoid sudden braking and steering ma- run-flat with no or low inflation pressure; neuvers. for instance, your lane stability when 2. Check whether the vehicle is fitted with braking is reduced, braking distances are normal tires or run-flat tires. longer and the self-steering properties will change. There is a risk of an accident. Run-flat tires, refer to page 264, are la- Drive moderately and do not exceed a beled with a circular symbol containing speed of 50 mph/80 km/h. the letters RSC marked on the tire's sidewall. Maximum speed Actions in the event of a flat tire You may continue driving with a damaged tire at speeds up to 50 mph/80 km/h. Normal tires 1. Identify the damaged tire. Continued driving with a flat tire To do this, check the tire inflation pres- If continuing to drive with a damaged tire: sure in all four tires, for instance using 1. Avoid sudden braking and steering ma- the tire pressure gage of a flat tire kit. neuvers. If the tire inflation pressure in all four 2. Do not exceed a speed of tires is correct, the Tire Pressure Moni- 50 mph/80 km/h. tor may not have been reset. In this case, perform the reset. 3. Check the tire inflation pressure in all four tires at the next opportunity. If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor If the tire inflation pressure in all four may not have been initialized. In this tires is correct, the Flat Tire Monitor case, initialize the system. may not have been initialized. In this case, initialize the system.

173 Online Edition for Part no. 01402723835 - VI/18 Seite 174

CONTROLS Safety

Possible driving range with a – Sudden serious tire damage caused by depressurized tire external circumstances cannot be recog- The distance for which it may be possible to nized in advance. drive safely varies depending on how the – When the system has not been initial- vehicle is loaded and used, e.g., speed, road ized. conditions, external temperature. The driv- – When driving on a snowy or slippery ing range may be less but may also be more road surface. if an economical driving style is used. – Sporty driving style: spinning traction If the vehicle is loaded with an average wheels, high lateral acceleration (drift- weight and used under favorable conditions, ing). the distance for which it may be safe to drive may be up to 50 miles/80 km. – When driving with snow chains.

Vehicle handling with damaged tires Vehicles driven with a damaged tire will Intelligent Safety handle differently, potentially leading to conditions such as the following: Concept – Greater likelihood of swerving off Intelligent Safety enables central operation course. of the driver assistance system. – Longer braking distances. The intelligent safety systems can help pre- – Changed self-steering properties. vent an imminent collision. Modify your driving style. Avoid abrupt – Approach control warning with City steering maneuvers or driving over obsta- light braking function, refer to cles, for instance curbs or potholes. page 175. – Person warning with City light braking Final tire failure function, refer to page 179. Vibrations or loud noises while driving can indicate the final failure of a tire. Safety information Reduce speed and stop; otherwise, pieces of the tire could come loose and cause an acci- WARNING dent. The system cannot serve as a substitute Do not continue driving. Contact a dealer’s for the driver’s personal judgment in as- service center or another qualified service sessing visibility and traffic situation. center or repair shop. There is a risk of an accident. Adjust driving style to traffic conditions. Watch traf- System limits fic closely and actively intervene where The system could be delayed or malfunction appropriate. in the following situations: – A natural, even tire inflation pressure loss in all four tires will not be recognized. Therefore, check the tire inflation pressure regularly.

174 Online Edition for Part no. 01402723835 - VI/18 Seite 175

Safety CONTROLS

Press button briefly: WARNING – The menu for the intelligent Indicators and warnings cannot serve as a safety system is displayed. The substitute for the driver’s personal judg- systems are individually ment. Due to its limits, the system might switched off according to their not output warnings or reactions or these respective settings. might be output late, incorrectly, or with- – LED lights up orange or goes out respec- out justification. There is a risk of an acci- tive to their individual settings. dent. Adjust driving style to traffic condi- Adjust as needed. The individual settings tions. Watch traffic closely and actively are stored for the driver profile currently in intervene where appropriate. use.

Press button again: WARNING – All Intelligent Safety systems Due to system limits, individual functions are switched on. can malfunction during tow-starting/ – The LED lights up green. towing with the Intelligent Safety systems activated. There is a risk of an accident. Hold down button: Switch all Intelligent Safety systems off – All Intelligent Safety systems prior to tow-starting/towing. are switched off. – The LED goes out. Overview Button in the vehicle Approach control warning with city light braking function

Concept The system can help prevent accidents. If an accident cannot be prevented, the system will help reduce the collision speed. The system sounds a warning before an im- Intelligent Safety button minent collision and activates brakes independently, if needed. The automatic braking intervention is done Switching on/off with limited force and duration. Some Intelligent Safety systems are auto- A camera at the base of the interior mirror matically active after every departure. Some controls the system. Intelligent Safety systems activate accord- The approach control warning is available ing to the last setting. even if cruise control has been deactivated.

175 Online Edition for Part no. 01402723835 - VI/18 Seite 176

CONTROLS Safety

With the vehicle approaching another vehicle intentionally, the approach control warn- WARNING ing and braking are delayed in order to Indicators and warnings cannot serve as a avoid false system reactions. substitute for the driver’s personal judgment. Due to its limits, the system might General information not output warnings or reactions or these The system warns at two levels of an immi- might be output late, incorrectly, or with- nent danger of collision at speeds from ap- out justification. There is a risk of an acci- prox. 3 mph/5 km/h. Time of warnings may dent. Adjust driving style to traffic condi- vary with the current driving situation. tions. Watch traffic closely and actively Appropriate braking kicks in at speeds of up intervene where appropriate. to 35 mph/60 km/h.

Detection range WARNING Due to system limits, individual functions can malfunction during tow-starting/ towing with the Intelligent Safety systems activated. There is a risk of an accident. Switch all Intelligent Safety systems off prior to tow-starting/towing.

Overview

Objects that the system can detect are Button in the vehicle taken into account.

Safety information

WARNING The system cannot serve as a substitute for the driver’s personal judgment in as- sessing visibility and traffic situation. There is a risk of an accident. Adjust driving style to traffic conditions. Watch traf- Intelligent Safety button fic closely and actively intervene where appropriate.

176 Online Edition for Part no. 01402723835 - VI/18 Seite 177

Safety CONTROLS

Camera – The LED goes out.

Setting the warning time The warning time can be set via the Central Information Display (CID). 1. "My MINI" 2. "Vehicle settings" 3. "Intelligent Safety" 4. "Warning time" The camera is installed near the interior mirror. 5. Select the desired setting. Keep the windshield in front of the interior The selected warning time is stored for the mirror clean and clear. driver profile currently in use.

Switching on/off Warning with braking function Display Switching on automatically A warning symbol appears in the instru- The system is automatically active after ev- ment cluster and in the Head-up Display if a ery driving off. collision with a detected vehicle is imminent. Switching on/off manually Symbol Measure Press button briefly: – The menu for the intelligent Symbol lights up red: prewarn- safety system is displayed. The ing. systems are individually Brake and increase distance. switched off according to their Symbol flashes red and an respective settings. acoustic signal sounds: acute – LED lights up orange or goes out respec- warning. tive to their individual settings. Brake and make an evasive ma- Adjust as needed. The individual settings neuver, if necessary. are stored for the driver profile currently in use. Prewarning Press button again: This warning is issued, for instance when – All Intelligent Safety systems there is the impending danger of a collision are switched on. or the distance to the vehicle ahead is too small. – The LED lights up green. The driver must intervene actively when Hold down button: there is a prewarning. – All Intelligent Safety systems are switched off.

177 Online Edition for Part no. 01402723835 - VI/18 Seite 178

CONTROLS Safety

Acute warning with braking function System limits Acute warning is displayed in case of the imminent danger of a collision when the ve- Safety information hicle approaches another object at a high differential speed. WARNING The driver must intervene actively when The system can react not at all, too late, in- there is an acute warning. If necessary, the correctly, or without justification due to driver is assisted by a minor automatic the system limits. There is a risk of acci- braking intervention in a possible risk of dents or risk of damage to property. Follow collision. the information regarding the system lim- Acute warnings can also be triggered with- its and actively intervene if needed. out previous forewarning.

Braking intervention Detection range The warning prompts the driver to react. The system's detection potential is limited. During a warning, the maximum braking Thus, a system reaction might not come or force is used. Prerequisite for the brake might come late. booster is sufficiently quick and sufficiently E.g., the following situations may not be de- hard stepping on the brake pedal. If there is tected: a risk of collision, the system may assist with braking.When the vehicle is traveling – Slow moving vehicles when you ap- at a low speed, the vehicle may come to a proach them at high speed. complete stop. – Vehicles that suddenly swerve in front Manual transmission: during a braking in- of you, or sharply decelerating vehicles. tervention up to a complete stop, the engine – Vehicles with an unusual rear appear- may be shut down. ance. The braking intervention occurs only if ve- – Two-wheeled vehicles ahead of you. hicle stability has not been restricted, for instance by deactivating the DSC Dy- Functional limitations namic Stability Control. The system may not be fully functional in The driver may cancel the braking interven- the following situations: tion by stepping on the accelerator pedal or – In heavy fog, wet conditions, or snow- by actively moving the steering wheel. fall. Object detection can be restricted. Follow – In tight curves. the limitations of the detection range and functional restrictions. – If the field of view of the camera or the windshield are dirty or covered. – If the driving stability control systems are deactivated, for instance DSC OFF. – Up to 10 seconds after the start of the engine via the Start/Stop button. – During calibration of the camera immediately after vehicle delivery.

178 Online Edition for Part no. 01402723835 - VI/18 Seite 179

Safety CONTROLS

– If there are constant blinding effects be- Detection range cause of oncoming light, for instance from the sun low in the sky.

Warning sensitivity The more sensitive the warning settings are, the more warnings are displayed. Therefore, there may also be an excess of premature or unjustified warnings and reactions. The detection area in front of the vehicle is Person warning with City divided into two areas: – Central area, arrow 1, directly in front of light braking function the vehicle. – Expanded area, arrow 2, to the right and Concept left of the central area. The system can help prevent accidents with A collision is imminent if pedestrians are lo- pedestrians. cated within the central area. A warning is When driving at city speeds, the system issued about pedestrians who are located will issue a warning if there is imminent within the extended area only if they are risk of a collision with pedestrians, and sup- moving in the direction of the central area. port this with a light braking function. The camera at the base of the interior mir- Safety information ror controls the system. General information WARNING With sufficient brightness, the system The system cannot serve as a substitute warns about possible collision danger with for the driver’s personal judgment in as- pedestrians starting at approx. sessing visibility and traffic situation. 6 mph/10 km/h to approx. 35 mph/60 km/h There is a risk of an accident. Adjust driv- and assists with braking before a collision. ing style to traffic conditions. Watch traffic closely and actively intervene where The system reacts to people who are within appropriate. the detection range of the system.

WARNING Indicators and warnings cannot serve as a substitute for the driver’s personal judgment. Due to its limits, the system might not output warnings or reactions or these might be output late, incorrectly, or without justification. There is a risk of an accident. Adjust driving style to traffic condi-

179 Online Edition for Part no. 01402723835 - VI/18 Seite 180

CONTROLS Safety

tions. Watch traffic closely and actively Switching on/off intervene where appropriate. Switching on automatically The system is automatically active after ev- WARNING ery driving off. Due to system limits, individual functions can malfunction during tow-starting/ Switching on/off manually towing with the Intelligent Safety systems Press button briefly: activated. There is a risk of an accident. Switch all Intelligent Safety systems off – The menu for the intelligent prior to tow-starting/towing. safety system is displayed. The systems are individually switched off according to their Overview respective settings. – LED lights up orange or goes out respec- Button in the vehicle tive to their individual settings. Adjust as needed. The individual settings are stored for the driver profile currently in use.

Press button again: – All Intelligent Safety systems are switched on. – The LED lights up green.

Hold down button: Intelligent Safety button – All Intelligent Safety systems are switched off. Camera – The LED goes out.

Warning with braking function

Display If a collision with a person detected in this way is imminent, a warning symbol appears on the instrument cluster and in the Head- up Display. The red symbol is displayed and a The camera is installed near the interior signal sounds. mirror. Intervene immediately by braking or Keep the windshield in front of the interior make an evasive maneuver. mirror clean and clear.

180 Online Edition for Part no. 01402723835 - VI/18 Seite 181

Safety CONTROLS

Braking intervention E.g., the following situations may not be de- The warning prompts the driver to react. tected: During a warning, the maximum braking – Partially covered pedestrians. force is used. Prerequisite for the brake – Pedestrians that are not detected as booster is sufficiently quick and sufficiently such because of the viewing angle or hard stepping on the brake pedal. If there is contour. a risk of collision, the system may assist – Pedestrians outside of the detection with braking.When the vehicle is traveling range. at a low speed, the vehicle may come to a complete stop. – Pedestrians having a body size less than 32 in/80 cm. Manual transmission: during a braking intervention up to a complete stop, the engine may be shut down. Functional limitations The braking intervention occurs only if ve- The system may not be fully functional or hicle stability has not been restricted, may not be available in the following situa- for instance by deactivating the DSC Dy- tions: namic Stability Control. – In heavy fog, wet conditions, or snow- The driver may cancel the braking interven- fall. tion by stepping on the accelerator pedal or – In tight curves. by actively moving the steering wheel. – If the field of view of the camera or the Object detection can be restricted. Follow windshield are dirty or covered. the limitations of the detection range and – If the driving stability control systems functional restrictions. are deactivated, for instance DSC OFF. – Up to 10 seconds after the start of the System limits engine via the Start/Stop button. – During calibration of the camera imme- Safety information diately after vehicle delivery. – If there are constant blinding effects be- WARNING cause of oncoming light, for instance The system can react not at all, too late, in- from the sun low in the sky. correctly, or without justification due to – When it is dark outside. the system limits. There is a risk of accidents or risk of damage to property. Follow the information regarding the system lim- Brake force display its and actively intervene if needed. Concept Detection range Additional brake lights indicate emergency The detection potential of the camera is lim- braking to the traffic behind. This can re- ited. duce the risk of a rear-end collision. Thus, a warning might not be issued or be issued late.

181 Online Edition for Part no. 01402723835 - VI/18 Seite 182

CONTROLS Safety

General information After travel has begun, the system monitors certain aspects of the driver's behavior, so that decreasing alertness or fatigue can be detected. This procedure takes the following criteria into account: – Personal driving style, for instance steering behavior. – Driving conditions, for instance length of trip. – During normal brake application, the Starting at approximately 43 mph/70 km/h, brake lights light up. the system is active and can display a rec- – During heavy brake application, the ommendation to take a break. flashers additionally light up. Break recommendation If the driver becomes less alert or fatigued, a message is displayed in the Control Dis- Alertness assistant play with the recommendation to take a break. Concept A recommendation to take a break is dis- The system can detect decreasing alertness played only once during an uninterrupted or fatigue of the driver during long, monoto- trip. nous trips, for instance on highways. In this After a break, another recommendation to situation, it is recommended that the driver take a break cannot be displayed until after takes a break. approximately 45 minutes. Safety information System limits The function may be limited in the follow- WARNING ing situations, for instance and will either The system cannot serve as a substitute output an incorrect warning or no warning for the driver’s personal judgment in as- at all: sessing one's physical state. An increasing – When the clock is set incorrectly. lack of alertness or fatigue may not be de- – When the vehicle speed is mainly below tected or not be detected in time. There is about 43 mph/70 km/h. a risk of an accident. Make sure that the – With a sporty driving style, such as dur- driver is rested and alert. Adjust driving ing rapid acceleration or when corner- style to traffic conditions. ing fast. – In active driving situations, such as Function when changing lanes frequently. The system is switched on each time the en- – When the road surface is poor. gine is started and cannot be switched off. – In the event of strong side winds.

182 Online Edition for Part no. 01402723835 - VI/18 Seite 183

Safety CONTROLS

The system is reset approx. 45 minutes after parking the vehicle, for instance in the case of a break during longer trips on highways.

PostCrash – iBrake

Concept In the event of an accident, the system can bring the vehicle to a halt automatically without intervention by the driver in certain situations. This can reduce the risk of a further collision and the consequences thereof. At standstill After coming to a halt, the brake is released automatically. Secure the vehicle against rolling. Harder vehicle braking It can be necessary to bring the vehicle in certain situations to a halt quicker. To do this, for a short time the braking pressure applied when stepping on the brake pedal must be higher than the braking pressure achieved by the automatic braking function. This interrupts automatic braking. Interrupting automatic braking It can be necessary to interrupt automatic braking in certain situations, for instance for an evasive maneuver. Interrupt automatic braking: – By pressing the brake pedal. – By pressing the accelerator pedal.

183 Online Edition for Part no. 01402723835 - VI/18 Seite 184

CONTROLS Driving stability control systems

Driving stability control systems

Vehicle features and options DSC Dynamic Stability Control

This chapter describes all standard, country- Concept specific and optional features offered with Within the physical limits, the system helps the series. It also describes features that are to keep the vehicle on a steady course by not necessarily available in your vehicle, reducing engine speed and by applying e. g., due to the selected options or country brakes to the individual wheels. versions. This also applies to safety-related functions and systems. When using these functions and systems, the applicable laws General information and regulations must be observed. DSC detects the following unstable driving conditions, for instance: – Fishtailing, which can lead to oversteer- Anti-lock Braking System ABS ing. – Loss of traction of the front wheels, ABS prevents locking of the wheels during which can lead to understeering. braking. Dynamic Traction Control DTC, refer to The vehicle maintains its steering power page 185, is a version of the DSC where for- even during full brake applications, thus in- ward momentum is optimized. creasing active safety. ABS is operational every time you start the Safety information engine. WARNING The system cannot serve as a substitute Brake assistant for the driver’s personal judgment in as- sessing the traffic situation. Based on the When you apply the brakes rapidly, this sys- limits of the system, it cannot independ- tem automatically boosts the vehicle brak- ently react to all traffic situations. There is ing capability to the furthest possible ex- a risk of an accident. Adjust driving style tent. It reduces the braking distance to a to traffic conditions. Watch traffic closely minimum during emergency stop. This sys- and actively intervene where appropriate. tem utilizes all of the capabilities provided by the Antilock Brake System ABS. Do not reduce the pressure on the brake WARNING pedal for the duration of the emergency When driving with a roof load, for in- stop. stance with roof-mounted luggage rack, the vehicle's center of gravity is higher, which increases the risk of the vehicle tip- ping in critical driving situations. There is a risk of accidents or risk of damage to

184 Online Edition for Part no. 01402723835 - VI/18 Seite 185

Driving stability control systems CONTROLS

property. Do not deactivate DSC Dynamic Automatic activation Stability Control when driving with roof When DSC is deactivated, automatic activa- load. tion occurs in the following situations: – The vehicle has a flat tire. Indicator/warning lights – When activating cruise control in The indicator light flashes: DSC con- TRACTION or DSC OFF mode. trols the drive and braking forces. The indicator light lights up: DSC has malfunctioned. DTC Dynamic Traction Con- trol Deactivating DSC: DSC OFF Concept General information DTC is a version of the DSC Dynamic Stabil- When DSC is deactivated, driving stability ity Control where forward momentum is op- is reduced during acceleration and when timized. driving in curves. The system ensures maximum headway on To increase vehicle stability, activate DSC special road conditions, for instance unp- again as soon as possible. lowed snowy roads or loose road surfaces, but with somewhat limited vehicle stability. Deactivating DSC When DTC is activated, the vehicle has maximum traction. Driving stability is lim- Press and hold this button but not ited during acceleration and when driving longer than approx. 10 seconds, un- in curves. til the indicator light for DSC OFF lights up in the instrument cluster and dis- Drive carefully. plays DSC OFF. You may find it useful to briefly activate DSC is switched off. DTC under the following special circumstances: – When driving in slush or on uncleared, Activating DSC snow-covered roads. Press button. – When driving off from deep snow or DSC OFF and the DSC OFF indicator loose ground. light go out. – When driving with snow chains.

Indicator/warning lights Deactivating/activating DTC When DSC is deactivated, DSC OFF is dis- Dynamic Traction Control played in the instrument cluster. Activating DTC The indicator light lights up: DSC is deactivated. Press button.

185 Online Edition for Part no. 01402723835 - VI/18 Seite 186

CONTROLS Driving stability control systems

TRACTION is displayed in the instrument Programs cluster and the indicator light for DSC OFF lights up. MID/GREEN Balanced tuning of the shock absorbers for Deactivating DTC more comfort. Press button again. SPORT TRACTION and the DSC OFF indicator light go out. Consistently sporty tuning of the shock absorbers for greater driving agility.

Performance Control MINI Driving Modes switch

Performance Control enhances the agility of Concept the vehicle. The MINI Driving Modes switch helps to To increase maneuverability, wheels are fine-tune the vehicle's settings and features. braked individually when a sporty driving Choose between three different programs. style is used. Pressing the MINI Driving Modes switch will activate the particular program. ALL4 Operating the programs

ALL4 is the all-wheel-drive system of your MINI Driving Modes switch Program vehicle. Concerted action by ALL4 and DSC Dynamic Stability Control further optimizes SPORT traction and driving dynamics. The ALL4 MID all-wheel-drive system variably distributes GREEN the driving forces to the front and rear axles as demanded by the driving situation and road surface. MID Adaptive chassis MID provides balanced tuning. With each starting operation, MID is activated using the Start/Stop button. Concept The tuning of the suspension can be GREEN changed with the system. The system offers several different pro- Concept grams. GREEN, refer to page 244, provides consis- The programs are selected via the MINI tent tuning to maximize range. Driving Modes switch.

186 Online Edition for Part no. 01402723835 - VI/18 Seite 187

Driving stability control systems CONTROLS

Activating GREEN Configuring SPORT Press the MINI Driving Modes switch Via the Central Information Display (CID): downward until GREEN is displayed in the instrument cluster. 1. "My MINI" 2. "Vehicle settings" Configuring GREEN 3. If necessary, "Driving mode" Via MINI Driving Modes switch 4. "Configure SPORT" 1. Activate GREEN. 5. Select the desired setting. 2. "Configure GREEN" This configuration is retrieved when SPORT is activated. 3. Configure the program. This configuration is retrieved when Configuring driving program GREEN is activated. Settings can be made for the following driving programs in Driving mode: Via the Central Information Display (CID) – GREEN, refer to page 186. 1. "My MINI" – SPORT, refer to page 187. 2. "Vehicle settings" 3. If necessary, "Driving mode" Displays 4. "Configure GREEN" Program selection 5. Select the desired setting. This configuration is retrieved when Pressing the MINI Driving GREEN is activated. Modes switch displays a list of programs, which can be se- SPORT lected.

Concept Selected program Consistently sporty tuning of the drivetrain for greater driving agility. The instrument cluster displays the selected program. Depending on the vehicle equipment, the tuning of the chassis and suspension also changes and SPORT can be individually configured. The configuration is stored for the driver profile currently in use. Drive-off assistant Activating SPORT Press the MINI Driving Modes switch up- Concept ward until SPORT is displayed in the instru- This system supports driving off on uphill ment cluster. grades. The parking brake is not required.

187 Online Edition for Part no. 01402723835 - VI/18 Seite 188

CONTROLS Driving stability control systems

Driving off with the drive-off assistant 1. Hold the vehicle in place with the foot brake. 2. Release the foot brake and drive off without delay. After the foot brake is released, the vehicle is held in place for approx. 2 seconds.

Servotronic

Servotronic is a speed-dependent power steering function. The system provides the steering force with more support at low speeds than at higher ones. This makes it easier to park, for instance, and makes steering more direct when driving at faster speeds. Furthermore, the steering force adapts according to the driving program, so that a direct, sporty feel or a comfortable steering response is conveyed.

188 Online Edition for Part no. 01402723835 - VI/18 Seite 189

Driving comfort CONTROLS

Driving comfort

Vehicle features and options General information A camera on the interior mirror is used to This chapter describes all standard, country- detect vehicles driving ahead. specific and optional features offered with Depending on the driving settings, the fea- the series. It also describes features that are tures of the cruise control can change in not necessarily available in your vehicle, certain areas. e. g., due to the selected options or country versions. This also applies to safety-related Safety information functions and systems. When using these functions and systems, the applicable laws and regulations must be observed. WARNING The system cannot serve as a substitute for the driver’s personal judgment in as- Camera-based cruise control sessing the traffic situation. Based on the limits of the system, it cannot independently react to all traffic situations. There is Concept a risk of an accident. Adjust driving style Using this system, a desired speed and a to traffic conditions. Watch traffic closely distance to a vehicle ahead can be adjusted and actively intervene where appropriate. using the buttons on the steering wheel. The system maintains the desired speed on clear roads. For this purpose, the vehicle ac- WARNING celerates or brakes automatically. The desired speed can be incorrectly ad- If a vehicle is driving ahead of you, the sys- justed or called up by mistake. There is a tem adjusts the speed of your vehicle so risk of an accident. Adjust the desired that the set distance to the vehicle ahead is speed to the traffic conditions. Watch traf- maintained. The speed is adjusted as far as fic closely and actively intervene where the given situation allows. appropriate. The distance can be adjusted in several steps. For safety reasons, it depends on the respective speed. WARNING With the Stop&Go function for Steptronic Risk of accident due to too high speed dif- transmissions: if the vehicle ahead of you ferences to other vehicles, for instance in brakes to a halt, and then proceeds to drive the following situations: again shortly thereafter, the system is able – When fast approaching a slowly mov- to detect this within the given system lim- ing vehicle. its. – Vehicle suddenly swerving into own lane. – When fast approaching standing vehicles.

189 Online Edition for Part no. 01402723835 - VI/18 Seite 190

CONTROLS Driving comfort

There is a risk of injuries or danger to life. Button Function Watch traffic closely and actively intervene where appropriate. Increase speed, refer to page 191. Reduce speed, refer to page 191. WARNING An unsecured vehicle can begin to move and possibly roll away. There is a risk of an Buttons are arranged according to vehicle's accident. Before exiting, secure the vehi- series, optional features and country speci- cle against rolling. fications. In order to ensure that the vehicle is secured against rolling away, follow the fol- Camera lowing: – Set the parking brake. – On uphill grades or on a downhill slope, turn the front wheels in the direction of the curb. – On uphill grades or on a downhill slope, also secure the vehicle, for instance with a wheel chock. The camera is installed near the interior Overview mirror. Keep the windshield in front of the interior Buttons on the steering wheel mirror clean and clear. Button Function Functional requirements Cruise control on/off, refer to page 191. Speed range Store/maintain speed, refer to The system is best used on well-constructed page 191. roads. Pause cruise control, refer to The system is functional at speeds begin- page 191. ning at approx. 20 mph/30 km/h. Continue cruise control with the With the Stop&Go function for Steptronic last setting, refer to page 192. transmissions: the system can also be activated while the vehicle is stationary. Reduce distance, refer to page 192. The max. speed that can be set is 85 mph/140 km/h. Increase distance, refer to Manual transmission: Active Cruise Control page 192. is interrupted below a speed of approx. 20 mph/30 km/h. The system does not brake to a stop.

190 Online Edition for Part no. 01402723835 - VI/18 Seite 191

Driving comfort CONTROLS

Switching on/off and interrupting – Manual transmission: when the clutch cruise control pedal is depressed for a few seconds or released while a gear is not engaged. Switching on – If selector lever position N is set. Press button on the steering wheel. – Dynamic Traction Control DTC is activated or DSC Dynamic Stability Control is deactivated. Display in the instrument cluster – If DSC Dynamic Stability Control inter- lights up. venes. – If the detection range of the camera is Display in the instrument cluster impaired, for instance by soiling, heavy lights up. The current speed is precipitation or glare effects from the adopted as desired speed and dis- sun. played with symbol. – Manual transmission: if the vehicle in Cruise control is active and maintains the front decelerates below a speed of ap- set speed. prox. 20 mph/30 km/h. DSC Dynamic Stability Control is switched – With the Stop&Go function for Step- on, if necessary. tronic transmissions: following a stationary period of approx. 3 seconds, af- Switching off ter the vehicle was braked to a stop by With the Stop&Go function for Steptronic the system. transmissions: when switching off while stationary, depress the brake pedal simulta- Setting the speed neously. Maintaining/storing the speed Press the button on the steering wheel. Press or button in the interrupted state. The displays go out. The stored desired When the system is switched on, the cur- speed is deleted. rent speed is maintained and stored as the desired speed. Interrupting manually The stored speed is displayed on the Press button on the steering wheel. symbol. With the Stop&Go function for Step- DSC Dynamic Stability Control is tronic transmissions: when interrupting switched on, if necessary. while stationary, depress the brake pedal simultaneously. The speed can also be stored as follows: Press button. Interrupting automatically The system is automatically interrupted in the following situations: Changing the speed – When the driver applies the brakes. or button: press until the desired speed is set.

191 Online Edition for Part no. 01402723835 - VI/18 Seite 192

CONTROLS Driving comfort

If active, the displayed speed is stored and The set distance is briefly displayed the vehicle reaches the stored speed when in the left part of the instrument the road is clear. cluster. – or button: each time it is pressed to the point of resistance, the desired Continuing cruise control speed increases or decreases by approx. 1 mph/1 km/h. General information – or button: each time it is pressed An interrupted cruise control can be contin- past the resistance point, the desired ued by calling up the stored speed. speed changes by a maximum of 5 mph/ 10 km/h. Make sure that the difference between current speed and stored speed is not too large or button: hold down to repeat the before calling up the stored speed. Other- action. wise, unintentional braking or accelerating may occur. Adjusting distance In the following cases, the stored speed value is deleted and cannot be called up Safety information again: – When the system is switched off. WARNING – When the ignition is switched off. The system cannot serve as a substitute for the driver’s personal judgment. Due to Calling up stored speed and distance the system limits, braking can be late. There is a risk of accidents or risk of dam- Press button with the system inter- age to property. Be aware to the traffic sit- rupted. Cruise control is continued uation at all times. Adjust the distance to with the stored values. The selected the traffic and weather conditions and distance is briefly displayed in the Info Dis- maintain the prescribed safety distance, play. possibly by braking. Switching distance control on/off Reduce distance Safety information Press button repeatedly until the desired distance is set. WARNING The set distance is briefly displayed The system does not react to traffic driv- in the left part of the instrument ing ahead of you, but instead maintains cluster. the stored speed. There is a risk of accidents or risk of damage to property. Adjust Increase distance the desired speed to the traffic conditions and brake as needed. Press button repeatedly until the desired distance is set.

192 Online Edition for Part no. 01402723835 - VI/18 Seite 193

Driving comfort CONTROLS

Switching distance control off Distance display Distance control can be switched off and on Distance 1 when driving with cruise control activated. Press and hold this button. Distance 2 Or: Press and hold this button. Distance 3

The indicator light in the instrument cluster lights up. Distance 4 This value is set automatically af- To switch distance control back on, press ter the system is switched on. one of the two buttons again briefly. After changing over distance control, a Detected vehicle Check Control message is displayed. Symbol lights up orange: Displays in the instrument cluster A vehicle has been detected ahead of you.

Desired speed and stored speed With the Stop&Go function for Step- In addition to the indicator light, the tronic transmissions: desired speed is displayed in the Info Rolling bars: the detected vehicle Display. has driven away. – Display lights up green: system is active, ACC does not accelerate. To accelerate, acti- the display indicates the desired speed. vate ACC as follows: – Display lights up orange: system is in- – By briefly pressing the accelerator terrupted, the display indicates the pedal. stored speed. – By pressing the RES CNCL button. – No display: system is switched off. – By pressing the or button. If no speed is indicated, it is possible that the conditions necessary for operation are not currently fulfilled. Indicator/warning lights Symbol flashes orange: Distance to vehicle ahead of you The conditions are not adequate for Selected distance from the vehicle driving the system to work. ahead is briefly displayed in the left hand The system was deactivated but applies the portion of the Info Display. brakes until you actively resume control by pressing on the brake pedal or accelerator pedal.

193 Online Edition for Part no. 01402723835 - VI/18 Seite 194

CONTROLS Driving comfort

Symbol flashes red and a signal – For pedestrians, cyclists or similarly sounds: slow-moving road users. Brake and make an evasive maneu- – For red traffic lights. ver, if necessary. – For cross traffic. The system has been interrupted or – For oncoming traffic. distance control is temporarily sup- – Unlit vehicles or vehicles with nonwork- pressed because the accelerator ing lighting at night. pedal is being pressed; a vehicle was not detected. Swerving vehicles

Distance control is temporarily suppressed because the accelerator pedal is being pressed; a vehicle was detected.

Displays in the Head-up Display The information from Active Cruise Control can also be displayed in the Head-up Dis- play. A vehicle driving in front of you is not detected until it is completely within the same System limits lane as your vehicle. If a vehicle driving ahead of you suddenly Detection range swerves into your lane, the system may not be able to automatically restore the selected distance. It may not be possible to restore the selected distance in certain situations, including if you are driving significantly faster than vehicles driving ahead of you, for instance when rapidly approaching a truck. When a vehicle driving ahead of you is reliably detected, the system requests that the driver intervene by braking and carrying out evasive maneuvers, if needed. The detection capacity of the system and the automatic braking capacity are limited. With the Stop&Go function for Two-wheeled vehicles for instance might not be detected. Steptronic transmissions: driving off In some situations, the vehicle cannot drive off automatically; for example: Deceleration – On steep uphill grades. The system does not decelerate in the following situations: – From bumps in the road. In these cases, press on the accelerator pedal.

194 Online Edition for Part no. 01402723835 - VI/18 Seite 195

Driving comfort CONTROLS

Cornering Examples of unfavorable weather or light conditions: – Wet conditions. – Snowfall. – Slush. – Fog. – Glare. Drive attentively, and react to the current traffic situation. If necessary, intervene ac- If the desired speed is too high for a curve, tively, for instance by braking, steering or the speed is reduced slightly, although evading. curves cannot be anticipated in advance. Therefore, drive into a curve at an appropri- Engine power ate speed. The desired speed may not be maintained The system has a limited detection range. on uphill grades if engine power is insuffi- Situations can arise in tight curves where a cient. vehicle driving ahead will not be detected or will be detected very late. Malfunction A Check Control message is displayed if the system fails or was automatically deactivated. The system may not be fully functional in the following situations: – When an object was not correctly detected. – In heavy fog, wet conditions, or snowfall. When you approach a curve the system may – In tight curves. briefly report vehicles in the next lane due – If the field of view of the camera or the to the bend of the curve. If the system de- windshield are dirty or covered. celerates you may compensate it by briefly – When driving toward bright lights. accelerating. After releasing the accelerator pedal the system is reactivated and controls – Up to 20 seconds after the start of the speed independently. engine, via the Start/Stop button. – During calibration of the camera immediately after vehicle delivery. Weather The following restrictions can occur under unfavorable weather or light conditions: – Poorer vehicle recognition. – Short-term interruptions for vehicles that are already recognized.

195 Online Edition for Part no. 01402723835 - VI/18 Seite 196

CONTROLS Driving comfort

Cruise control Overview

Concept Buttons on the steering wheel Using this system, a desired speed can be Button Function adjusted using the buttons on the steering wheel. The system maintains the desired Cruise control on/off, refer to speed. The system accelerates and brakes page 196. automatically as needed. Store speed, refer to page 197.

General information Pause cruise control, refer to The system is functional at speeds begin- page 196. ning at approx. 20 mph/30 km/h. Continue cruise control with the Depending on the driving settings, the fea- last setting, refer to page 197. tures of the cruise control can change in certain areas. Increase speed, refer to page 197. Safety information Reduce speed, refer to page 197.

WARNING The system cannot serve as a substitute Switching on/off and interrupting for the driver’s personal judgment in as- cruise control sessing the traffic situation. Based on the limits of the system, it cannot independ- Switching on ently react to all traffic situations. There is Press button on the steering wheel. a risk of an accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate. The indicator light in the instrument cluster lights up.

WARNING The current speed is adopted as the desired speed and is displayed with The use of the system can lead to an in- the symbol in the instrument cluster. creased risk of accidents in the following situations, for instance: Cruise control is active and maintains the – On winding roads. set speed. – In heavy traffic. DSC Dynamic Stability Control is switched – On slippery roads, in fog, snow, or on, if necessary. wet conditions, or on a loose road surface. Switching off There is a risk of accidents or risk of dam- Press button on the steering wheel. age to property. Only use the system if driving at constant speed is possible.

196 Online Edition for Part no. 01402723835 - VI/18 Seite 197

Driving comfort CONTROLS

The displays go out. The stored desired Changing the speed speed is deleted. or button: press until the desired speed is set. Interrupting manually If active, the displayed speed is stored and When active, press the button on the vehicle reaches the stored speed when the steering wheel. the road is clear. – or button: each time it is pressed Interrupting automatically to the point of resistance, the desired The system is automatically interrupted in speed increases or decreases by approx. the following situations: 1 mph/1 km/h. – When the driver applies the brakes. – or button: each time it is pressed past the resistance point, the desired – If the clutch pedal is depressed for a few speed changes by a maximum of 5 mph/ seconds or released while a gear is not 10 km/h. engaged. – or button: pressing it to the re- – If the gear engaged is too high for the sistance point and holding it accelerates current speed. or decelerates the vehicle without re- – If selector lever position N is set. quiring pressure on the accelerator – Dynamic Traction Control DTC is acti- pedal. After the button is released, the vated or DSC Dynamic Stability Control vehicle maintains its final speed. Press- is deactivated. ing the switch beyond the resistance point causes the vehicle to accelerate – If DSC Dynamic Stability Control inter- more rapidly. venes. Setting the speed Continuing cruise control General information Maintaining/storing the speed An interrupted cruise control can be contin- Press or button in the interrupted ued by calling up the stored speed. state. Make sure that the difference between cur- When the system is switched on, the current speed and stored speed is not too large rent speed is maintained and stored as the before calling up the stored speed. Other- desired speed. wise, unintentional braking or accelerating The stored speed is displayed in the instru- may occur. ment cluster. DSC Dynamic Stability Control is switched Calling up stored speed on, if necessary. Press button on the steering wheel. The speed can also be stored as follows: Press button. The stored speed is reached again and maintained.

197 Online Edition for Part no. 01402723835 - VI/18 Seite 198

CONTROLS Driving comfort

Displays in the instrument cluster General information The ultrasound sensors for measuring the Indicator light distances are located in the bumpers. Depending on how the vehicle is The maneuvering range, depending on ob- equipped, the indicator light in the stacles and environmental conditions, is ap- instrument cluster indicates whether prox. 6 ft/2 m. the system is switched on. An acoustic warning is first given in the following situations: Desired speed and stored speed – By the front middle sensors and the two The desired speed is displayed to- corner sensors at approx. 24 in/60 cm gether with the symbol. from the object. – Display lights up green: system is – By the rear middle sensors at ap- active, the display indicates the prox. 5 ft/1.50 m from the object. desired speed. – When a collision is imminent. – Display lights up orange: system is interrupted, the display indicates the Safety information stored speed. – No display: system is switched off. WARNING If no speed is indicated, it is possible that The system cannot serve as a substitute the conditions necessary for operation are for the driver’s personal judgment in as- not currently fulfilled. sessing the traffic situation. There is a risk of an accident. Adjust driving style to traffic conditions. Watch traffic and vehicle System limits surroundings closely and actively intervene where appropriate. Engine power The desired speed is also maintained downhill, but may not be maintained on uphill WARNING grades if engine power is insufficient. Due to high speeds when PDC Park Dis- tance Control is activated, the warning can be delayed due to physical circumstances. PDC Park Distance Control There is a risk of injury or risk of damage to property. Avoid approaching an object Concept too fast. Avoid driving off fast while PDC PDC is a support when parking. The system Park Distance Control is not yet active. detects objects behind the vehicle. If the vehicle is equipped with front PDC, objects in front of the vehicle are detected too. Ob- jects that you are approaching slowly are indicated by signal tones and a visual display.

198 Online Edition for Part no. 01402723835 - VI/18 Seite 199

Driving comfort CONTROLS

Overview With front PDC: automatic activation on obstacle detection can be switched off. Via the With front PDC: button in vehicle Central Information Display (CID): 1. "My MINI" 2. "Vehicle settings" 3. "Parking" 4. "Automatic PDC activation": depending on the vehicle equipment. 5. "Automatic PDC activation" The setting is stored for the driver profile currently used. Park assistance button Automatic deactivation during forward travel Ultrasound sensors The system switches off when a certain Ultrasound sensors of the driving distance or speed is exceeded. PDC, for instance in the bump- Switch the system back on, if needed. ers. With front PDC: switching on/off manually Press park assistance button. Functional requirements Ensure full functionality: – On: the LED lights up. – Do not cover sensors, for instance with – Off: the LED goes out. stickers, bicycle racks. The rearview camera image is displayed if – Keep the sensors clean and unob- the reverse gear is engaged when pressing structed. the park assistance button. Switching on/off WARNING

Switching on automatically Signal tones The system switches on automatically in the When approaching an object, an intermit- following situations: tent sound indicates the position of the ob- – If selector lever position R is engaged ject. E.g., if an object is detected to the left when the engine is running. rear of the vehicle, a signal tone sounds The rearview camera also switches on. from the left rear speaker. – With front PDC: when obstacles are de- The shorter the distance to the object, the tected behind or in front of the vehicle shorter the intervals. by PDC and the speed is slower than ap- If the distance to a detected object is less prox. 2.5 mph/4 km/h. than approx. 10 inches/25 cm, a continuous tone is sounded.

199 Online Edition for Part no. 01402723835 - VI/18 Seite 200

CONTROLS Driving comfort

With front PDC: if objects are simultane- System limits ously located both in front of and behind the vehicle, an alternating continuous sig- Safety information nal is sounded. The signal tone is switched off, when selec- WARNING tor lever position P is engaged on vehicles with Steptronic transmission. The system can react not at all, too late, incorrectly, or without justification due to Volume the system limits. There is a risk of accidents or risk of damage to property. Follow The ratio of the PDC signal tone volume to the information regarding the system lim- the entertainment volume can be adjusted. its and actively intervene if needed. 1. "My MINI" 2. "System settings" Limits of ultrasonic measurement 3. "Tone" Ultrasonic measuring might not function 4. "Volume settings" under the following circumstances: 5. "PDC" – For small children and animals. 6. Set the desired value. – For persons with certain clothing, for instance coats. The setting is stored for the driver profile currently used. – With external interference of the ultrasound, for instance from passing vehi- Visual warning cles or loud machines. The approach of the vehicle to an object can – When sensors are dirty, iced over, dam- be shown on the Control Display. Objects aged or out of position. that are farther away are already displayed – If cargo protrudes. on the Control Display before a signal – Under certain weather conditions such sounds. as high relative humidity, wet condi- A display appears as soon as Park Distance tions, snowfall, extreme heat, or strong Control (PDC) is activated. wind. The range of the sensors is represented in – With tow bars and trailer couplings of colors: red, green and yellow. other vehicles. When the image of the rearview camera is – With thin or wedge-shaped objects. displayed, the switch can be made to PDC: – With moving objects. "Rear view camera" – With elevated, protruding objects such as ledges or cargo. – With objects with corners and sharp edges. – With objects with a fine surface struc- ture such as fences. – For objects with porous surfaces.

200 Online Edition for Part no. 01402723835 - VI/18 Seite 201

Driving comfort CONTROLS

– Low objects already displayed, for in- PDC has failed. Have the system checked by stance curbs, can move into the blind a dealer’s service center or another quali- area of the sensors before or after a con- fied service center or repair shop. tinuous tone sounds. False warnings Rearview camera The system may issue a warning under the following conditions even though there is Concept no obstacle within the detection range: The rearview camera provides assistance in – In heavy rain. parking and maneuvering backwards. The – When sensors are very dirty or covered area behind the vehicle is shown on the with ice. Control Display. – When sensors are covered in snow. – On rough road surfaces. Safety information – On uneven surfaces, such as speed bumps. WARNING – In large buildings with right angles and The system cannot serve as a substitute smooth walls, for instance in under- for the driver’s personal judgment in as- ground garages. sessing the traffic situation. There is a risk – In automatic vehicle washes. of an accident. Adjust driving style to traffic conditions. Watch traffic and vehicle – Due to heavy exhaust. surroundings closely and actively inter- – Due to other ultrasound sources, for in- vene where appropriate. stance sweeping machines, high pressure steam cleaners or neon lights. The malfunction is signaled by a contin- Overview uous tone alternating between the front and rear speakers. As soon as the mal- Depending on the vehicle equipment: function due to other ultrasound sources button in the vehicle is no longer present, the system is again fully functional. With front PDC: to reduce false alarms, switch off automatic PDC activation on obstacle detection, for instance in vehicle washes; see Switching on/off. Malfunction A Check Control message is displayed in the instrument cluster. Park assistance button Red symbol is displayed, and the range of the sensors is dimmed on the Control Display.

201 Online Edition for Part no. 01402723835 - VI/18 Seite 202

CONTROLS Driving comfort

Camera Switching the view via the Central Information Display (CID) If the rearview camera view is not displayed, change the view via the Central In- formation Display (CID): "Rear view camera" The rearview camera image is displayed. Display on the Control Display

The camera lens is located in the handle of Functional requirement the tailgate. – The rearview camera is switched on. The image quality may be impaired by dirt. – The tailgate is fully closed. If necessary, clean the camera lens. – Keep the recording range of the camera clear. Switching on/off Protruding cargo or carrier systems and trailers that are not connected to a Switching on automatically trailer power socket can lead to malfunc- The system is switched on automatically if tions. selector lever position R is engaged when the engine is running. Activating assistance functions More than one assistance function can be Automatic deactivation during active at the same time. forward travel – Parking aid lines The system switches off when a certain "Parking aid lines" driving distance or speed is exceeded. Lanes and turning radius are indicated. Switch the system back on, if needed. – Obstacle marking Depending on the vehicle equipment: "Obstacle marking" switching on/off manually Obstacles are marked, depending on the Press park assistance button. vehicle equipment.

– On: the LED lights up. – Off: the LED goes out. The parking assistance functions are shown on the Control Display.

202 Online Edition for Part no. 01402723835 - VI/18 Seite 203

Driving comfort CONTROLS

Pathway lines Obstacle marking

Pathway lines can be superimposed on the Depending on the vehicle equipment, obsta- image of the rearview camera. cle markings can be faded into the image of Pathway lines help you to estimate the the rearview camera. space required when parking and maneu- The colored thresholds of the obstacle mark- vering on level roads. ings match the markings of the PDC Park Pathway lines depend on the current steer- Distance Control. ing angle and are continuously adjusted to the steering wheel movements. Parking using pathway and turning radius lines Turning radius lines 1. Position the vehicle so that the turning radius lines lead to within the limits of the parking space.

Turning radius lines can be superimposed on the image of the rearview camera. Turning radius lines show the course of the smallest possible turning radius on a level road. Only one turning radius line is displayed after the steering wheel is turned past a certain angle.

203 Online Edition for Part no. 01402723835 - VI/18 Seite 204

CONTROLS Driving comfort

2. Turn the steering wheel to the point fore, do not estimate the distance from the where the pathway line covers the cor- objects on the display. responding turning radius line. Parking assistant

Concept

Display settings

Brightness With the rearview camera switched on: This system assists the driver in parking 1. Select the symbol. parallel to the road. 2. Turn the Controller until the desired setting is reached and press the Controller. General information Parking assistant handling is divided into Contrast three steps: With the rearview camera switched on: – Switching on and activating. – Parking space search. 1. Select the symbol. – Parking. 2. Turn the Controller until the desired setting is reached and press the Controller. Ultrasound sensors measure parking spaces on both sides of the vehicle. System limits The parking assistant calculates the best possible parking line and takes control of Detection of objects steering during the parking procedure. Very low obstacles or high, protruding ob- System status and instructions on required jects such as ledges may not be recognized actions are displayed on the Control Dis- by the system. play. Depending on the vehicle equipment, some A component of the parking assistant is the assistance functions also consider data from PDC Park Distance Control. the PDC Park Distance Control. Follow the notes in the PDC Park Distance Control chapter. The objects displayed on the Control Dis- play may be closer than they appear. There-

204 Online Edition for Part no. 01402723835 - VI/18 Seite 205

Driving comfort CONTROLS

Safety information Ultrasound sensors

WARNING The system cannot serve as a substitute for the driver’s personal judgment in as- sessing the traffic situation. Based on the limits of the system, it cannot independently react to all traffic situations. There is a risk of an accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate. The ultrasound sensors for measuring parking spaces are located on the wheel housing. NOTICE The parking assistant can steer the vehicle Functional requirements over or onto curbs. There is a risk of damage to property. Watch traffic closely and Ultrasound sensors actively intervene where appropriate. Ensure full functionality: The safety information of the PDC Park Dis- – Do not cover sensors, for instance with tance Control applies in addition. stickers. – Keep the sensors clean and unob- Overview structed.

Button in the vehicle For measuring parking spaces – Maximum speed while driving forward approx. 22 mph/35 km/h. – Maximum distance to row of parked vehicles: 5 ft/1.5 m.

Suitable parking space – Gaps behind an object that has a min. length of 5 ft/1.5 m. – Gap between two objects with a mini- Park assistance button mum length of approx. 5 ft/1.5 m. – Min. length of gap between two objects: your vehicle's length plus approx. 3.3 ft/1.0 m. – Minimum depth: approx. 5 ft/1.5 m.

For parking – Doors and tailgate are closed.

205 Online Edition for Part no. 01402723835 - VI/18 Seite 206

CONTROLS Driving comfort

– The parking brake is released. Parking space search and system – When parking in parking spaces on the status driver's side, the corresponding turn signal must be switched on. Switching on and activating

Switching on with the button Press park assistance button. The LED lights up.

The current status of the parking space – Symbol P on the vehicle image: the park- search is indicated on the Control Display. ing assistant is activated and the park- Parking assistant is activated automati- ing space search is active. cally. – Control Display shows suitable parking spaces at the edge of the road next to Switching on with reverse gear the vehicle symbol. When the parking Shift into reverse. assistant is active, suitable parking spaces are highlighted. The current status of the parking space search is indicated on the Control Display. – The parking procedure is active. Steering control To activate: "Parking Assistant" has been taken over by system. Display on the Control Display

System activated/deactivated – Parking space search is always active whenever the vehicle is moving forward Symbol Meaning slow and straight, even if the system is deactivated. When the system is deacti- Gray: the system is not availa- vated, the displays on the Control Dis- ble. play are shown in gray. White: the system is available but not activated. Parking using the parking assistant The system is activated. Parking

1. Press the park assistance button or shift into reverse gear to switch on the parking assistant, refer to page 206. Ac- tivate the parking assistant, if needed. Parking assistant is activated. 2. Pass the row of parked vehicles at a speed of up to approx. 22 mph/35 km/h

206 Online Edition for Part no. 01402723835 - VI/18 Seite 207

Driving comfort CONTROLS

and at a distance of maximum Resuming 5 ft/1.5 m. An interrupted parking procedure can be The status of the parking space search continued, if needed. and possible parking spaces are dis- Reactivate the parking assistant, refer to played on the display, refer to page 206. page 206, and follow the instructions on the 3. Follow the instructions on the display. display. The best possible parking position will come after gear change on the station- Switching off ary vehicle - wait for the automatic The system can be switched off as follows: steering wheel move. – Press park assistance button. The end of the parking procedure is indicated on the display. – Switching off the ignition. 4. Adjust the parking position yourself, if needed. System limits

Interrupting manually Safety information The parking assistant can be interrupted at any time: WARNING – Press park assistance button. The system can react not at all, too late, incorrectly, or without justification due to – "Parking Assistant" the system limits. There is a risk of accidents or risk of damage to property. Follow Interrupting automatically the information regarding the system lim- The system is interrupted automatically in its and actively intervene if needed. the following situations: – If the driver grasps the steering wheel or takes over steering. No parking assistance – If a gear is selected that does not match The parking assistant does not offer assis- the instruction on the display. tance in the following situations: – If the vehicle speed exceeds approx. – In tight curves. 6 mph/10 km/h. Functional limitations – Possibly on snow-covered or slippery road surfaces. The system may not be fully functional in the following situations: – If a maximum number of parking attempts or the time taken for parking is – On bumpy road surfaces such as gravel exceeded. roads. – If the PDC Park Distance Control dis- – On slippery ground. plays clearances that are too small. – With accumulations of leaves/snow in – When switching into other functions of the parking space. the radio. – With a mounted emergency wheel. A Check Control message is displayed.

207 Online Edition for Part no. 01402723835 - VI/18 Seite 208

CONTROLS Driving comfort

– With ditches or edges, for instance an Malfunction edge of a port. A Check Control message is displayed. Limits of ultrasonic measurement The parking assistant failed. Have the system checked by a dealer’s service center or Ultrasonic measuring might not function another qualified service center or repair under the following circumstances: shop. – For small children and animals. – For persons with certain clothing, for instance coats. – With external interference of the ultrasound, for instance from passing vehicles or loud machines. – When sensors are dirty, iced over, damaged or out of position. – If cargo protrudes. – Under certain weather conditions such as high relative humidity, wet conditions, snowfall, extreme heat, or strong wind. – With tow bars and trailer couplings of other vehicles. – With thin or wedge-shaped objects. – With moving objects. – With elevated, protruding objects such as ledges or cargo. – With objects with corners and sharp edges. – With objects with a fine surface struc- ture such as fences. – For objects with porous surfaces. – Low objects already displayed, for instance curbs, can move into the blind area of the sensors before or after a continuous tone sounds. – The parking assistant may identify parking spaces that are not suitable for parking.

Tire size The parking position may vary depending on the tire size.

208 Online Edition for Part no. 01402723835 - VI/18 Seite 209

Climate control CONTROLS

Climate control

Vehicle features and options – Emission tested car's interior. – Microfilter. This chapter describes all standard, country- – Air conditioning system to control the specific and optional features offered with temperature, air flow and recirculated- the series. It also describes features that are air mode. not necessarily available in your vehicle, Depending on the equipment specification: e. g., due to the selected options or country – Microfilter/activated-charcoal filter. versions. This also applies to safety-related functions and systems. When using these – Automatic climate control. functions and systems, the applicable laws – Parked-car ventilation. and regulations must be observed.

Interior air quality

The air quality in the vehicle is improved by the following components:

Air conditioner

1 Air distribution settings 2 Air flow

209 Online Edition for Part no. 01402723835 - VI/18 Seite 210

CONTROLS Climate control

3 Temperature 7 Rear window defroster 4 Seat heating, right 97 8 Windshield defroster 5 Air conditioning 9 Seat heating, left 97 6 Recirculated-air mode

Climate control functions in detail Switching on/off Press button. Switching the system on/off The LED is illuminated with air conditioning switched on. Switching on Set any air flow. Depending on the weather, the windshield may fog up briefly when the engine is Switching off started. Turn the wheel for air flow all The air conditioner produces condensation the way to the left. water, refer to page 241, that will exit from below the vehicle.

Recirculated-air mode

Temperature Concept You may react to unpleasant odors or pollu- Concept tants in the immediate environment by tem- The system heats or cools, depending on the porarily suspending the supply of outside set temperature. air. The system then recirculates the air flow within the vehicle. Settings Operation Turn the ring to set the desired temperature. Press button repeatedly to select an operating mode: – LED off: outside air flows in continuously. – LED on, recirculated-air mode: the sup- Air conditioning ply of outside air into the vehicle is permanently blocked. Concept To prevent window condensation, recircu- The air in the car's interior will be cooled lated-air mode switches off automatically af- and dehumidified and, depending on the ter a certain amount of time, depending on temperature setting, warmed again. the external temperature. The car's interior can only be cooled with With constant recirculated-air mode, the air the engine running. quality in the car's interior deteriorates and the fogging of the windows increases.

210 Online Edition for Part no. 01402723835 - VI/18 Seite 211

Climate control CONTROLS

If the windows fog over, switch off recircu- Defrosting windows and removing lated-air mode and increase the air flow, if condensation needed. Make the following settings to defrost the windows and remove condensation: Controlling the air flow manually – Direct the air distribution onto the win- Concept dows. The air flow for climate control can be ad- – Increasing the air flow. justed manually. – Increase the temperature. – Switch on the air conditioning if needed. Operation Turn the ring to set the de- Windshield defroster sired air flow. Press button. The LED lights up. The higher the air flow, the The front window defroster more effective the heating or switches off automatically after a certain cooling will be. period of time. The air flow from the air conditioner may be reduced automatically to save battery Rear window defroster power. Press button. The LED lights up. Controlling the air distribution The rear window defroster switches manually off automatically after a certain period of time. Concept For permanent activation, press the button The air distribution for climate control can for longer than 3 seconds. To deactivate, be adjusted manually. press the button again. The rear window defroster can only be acti- Operation vated continuously at an external temperature below approx. 41 ℉/5 ℃. Turn the wheel to select the desired program or the desired When GREEN Mode is activated, the heater intermediate setting. output is reduced.

Microfilter – Windows. In external and recirculated-air mode the – Upper body region. microfilter filters dust and pollen from the – Floor area. air. – Windows, upper body region, and Have this filter changed during vehicle floor area. maintenance, refer to page 285.

211 Online Edition for Part no. 01402723835 - VI/18 Seite 212

CONTROLS Climate control

Automatic climate control

1 Temperature, left 9 Maximum cooling 2 Display 10 Air conditioning 3 Air flow, AUTO intensity 11 Recirculated-air mode 4 AUTO program 12 Rear window defroster 5 Air distribution, manual 13 Windshield defroster 6 Display 14 Defrosting windows and removing con- 7 Temperature, right densation 8 Seat heating, right 97 15 Seat heating, left 97

Climate control functions in detail Switching off Turn wheel for air flow to the Switching the system on/off left until the control switches off. Switching on Set any air flow.

Temperature

Concept The automatic climate control achieves the set temperature as quickly as possible, if

212 Online Edition for Part no. 01402723835 - VI/18 Seite 213

Climate control CONTROLS

necessary by using the maximum cooling or Maximum cooling heating power, and then keeps it constant. Concept Settings The system is set to the lowest temperature, Turn the ring to set the de- maximum air flow and recirculated-air sired temperature. mode.

General information The function is available with external tem- Do not rapidly switch between different peratures beyond approx. 32 ℉/0 ℃ and temperature settings. The automatic climate with the engine running. control will not have sufficient time to ad- Air flows out of the vents to the upper body just the set temperature. region. The vents need to be open for this. The air flow can be adjusted with the air Air conditioning flow active.

Concept Switching on/off The air in the car's interior will be cooled Press button. and dehumidified and, depending on the temperature setting, warmed again. The LED is illuminated with the system switched on. The car's interior can only be cooled with the engine running. The system is set to the lowest temperature, optimum air flow and air circulation mode. Switching on/off Press button. AUTO program The LED is illuminated with air con- Concept ditioning switched on. The AUTO program cools, ventilates or Depending on the weather, the windshield heats the car's interior automatically. may fog up briefly when the engine is The air distribution and temperature are started. controlled automatically depending on the The air conditioning is switched on auto- temperature in the car's interior and the de- matically with the AUTO program. sired temperature setting including the se- When using the automatic climate control, lected intensity of the air flow. condensation water, refer to page 241, develops and drains underneath the vehicle. Switching on/off This is normal. Press button. The LED is illuminated with the AUTO program switched on. Depending on the selected temperature, AUTO intensity and outside influences, the

213 Online Edition for Part no. 01402723835 - VI/18 Seite 214

CONTROLS Climate control

air is directed to the windshield, side win- Switching on/off dows, upper body, and into the floor area. Press button repeatedly to select an The following features are switched on au- operating mode: tomatically with the AUTO program: – The air conditioning, refer to page 213. – LEDs off: outside air flows in continuously. To switch off the program: press the button again or manually adjust the air distribu- – Left LED on, automatic recirculated-air tion. control: a sensor detects pollutants in the outside air and shuts off automati- Intensity cally. With the AUTO program activated, the au- – Right LED on, recirculated-air mode: the tomatic intensity control can be changed. supply of outside air into the vehicle is permanently blocked. Turn the ring to set the de- To prevent window condensation, recircu- sired intensity from soft to in- lated-air mode switches off automatically af- tensive. ter a certain amount of time, depending on the external temperature. If windows are fogged over, switch off the The set intensity is displayed via the posi- recirculating mode and press the AUTO but- tion of the illuminated LED segment. ton. Make sure that air can flow to the windshield. Automatic recirculated-air control/ recirculated-air mode Controlling the air flow manually

Concept Concept The automatic recirculated-air control AUC The air flow for climate control can be ad- recognizes odors or pollutants in the out- justed manually. side air. The outside air supply is shut off and the interior air is recirculated. General information To manually adjust air flow switch off AUTO General information program first. If the system is activated, a sensor detects pollutants in the outside air and controls the Operation shut-off automatically. Turn the ring to set the de- If the system is deactivated, outside air con- sired air flow. tinuously flows into the car's interior. With constant recirculated-air mode, the air quality in the car's interior deteriorates and the fogging of the windows increases. The manually adjusted air flow is displayed You may react to unpleasant odors or pollu- via illuminated LED segments. tants in the immediate environment by temporarily suspending the supply of outside The air flow of the automatic climate con- air. The system then recirculates the air trol may be reduced automatically to save flow within the vehicle. battery power.

214 Online Edition for Part no. 01402723835 - VI/18 Seite 215

Climate control CONTROLS

Controlling the air distribution Windshield defroster manually Press button. The LED lights up. Concept The front window defroster switches off automatically after a certain The air distribution for climate control can period of time. be adjusted manually.

Operation Rear window defroster Press button repeatedly to select a Press button. The LED lights up. program: The rear window defroster switches off automatically after a certain period of – Windows, upper body region, and floor time. area. For permanent activation, press the button – Upper body region and floor area. for longer than 3 seconds. To deactivate, – Floor area. press the button again. – Windows and floor area. The rear window defroster can only be acti- – Windows. vated continuously at an external tempera- – Windows and upper body region. ture below approx. 41 ℉/5 ℃. – Upper body region. When GREEN Mode is activated, the heater output is reduced. Defrosting windows and removing condensation Microfilter/activated-charcoal filter In external and recirculated-air mode the Concept microfilter/activated charcoal filter filters Ice and condensation are quickly removed dust, pollen, and gaseous pollutants out of from the windshield and the front side win- the air. dows. Have this filter changed during vehicle maintenance, refer to page 285. Switching on/off Press button. The LED is illuminated with the Ventilation system switched on. Ice and condensation are quickly removed Setting from the windshield and the front side win- The air flow directions can be individually dows. adjusted: The air flow can be adjusted with the air – Direct ventilation: flow active. The air flow is directly pointed onto the If there is window condensation, switch on person. The air flow heats or cools no- the air conditioning too. ticeably, depending on the adjusted temperature. – Indirect ventilation:

215 Online Edition for Part no. 01402723835 - VI/18 Seite 216

CONTROLS Climate control

If the vents are fully or partly closed, the General information air is directly routed into the car's inte- The parked-car ventilation can be switched rior. on and off directly or by using two preset activation times. The system remains Front ventilation switched on for 30 minutes. The parked-car ventilation system is operated via the Central Information Display (CID). Functional requirements – Direct operation: vehicle is in radio- ready state. – Direct operation or preset activation time: does not depend on external tem- – Turn knob for continuous opening and perature. closing of the vents. – Battery is sufficiently charged. – Swivel the vents to alter the direction of the vent flow, arrows. If parked-car ventilation is switched on, the vehicle battery will be discharged. Thus, limit the maximum activation time Ventilation in the rear to save the vehicle battery. The system will be available again after the engine is started or after a short trip. – Make sure that the vehicle's date and time are set correctly. – Open the vents to allow air to flow out. Switching on/off directly Via the Central Information Display (CID): 1. "My MINI" – Lever for changing the air flow direction, arrow 1. 2. "Vehicle settings" – Thumbwheel for variable opening and 3. If necessary, "Climate functions" closing of the vents, arrow 2. 4. "Activate comfort ventilation now" The symbol on the automatic climate control flashes if the system is switched on. Parked-car ventilation Preselecting the activation time Concept Via the Central Information Display (CID): The parked-car ventilation ventilates the 1. "My MINI" car's interior and lowers its temperature, if needed. 2. "Vehicle settings"

216 Online Edition for Part no. 01402723835 - VI/18 Seite 217

Climate control CONTROLS

3. If necessary, "Climate functions" 4. "Comfort ventilation" 5. Select the desired activation time. 6. Set the desired time.

Activating the activation time Via the Central Information Display (CID): 1. "My MINI" 2. "Vehicle settings" 3. If necessary, "Climate functions" 4. "For start time at:" Activate the desired activation time. The symbol on the automatic climate control lights up when the activation time is activated. The symbol on the automatic climate control flashes when the system has been switched on. The system will only be switched on within the next 24 hours. After that, it needs to be reactivated.

217 Online Edition for Part no. 01402723835 - VI/18 Seite 218

CONTROLS Interior equipment

Interior equipment

Vehicle features and options risk of damage to property. Make sure that the area of movement of the respective system is clear during programming and This chapter describes all standard, country- operation. Also follow the safety informa- specific and optional features offered with tion of the hand-held transmitter. the series. It also describes features that are not necessarily available in your vehicle, e. g., due to the selected options or country Compatibility versions. This also applies to safety-related functions and systems. When using these If this symbol is printed on the pack- functions and systems, the applicable laws aging or in the owner's manual of the and regulations must be observed. system to be controlled, the system is generally compatible with the integrated Universal Remote Control. Integrated Universal Remote If you have any questions, please contact: Control – A dealer’s service center or another qualified service center or repair shop. Concept – www.homelink.com on the Internet. The integrated Universal Remote Control in HomeLink is a registered trademark of Gen- the interior mirror can operate up to 3 func- tex Corporation. tions of remote-controlled systems, such as garage door drives, barriers, or lighting sys- Overview tems. The integrated Universal Remote Con- trol replaces up to 3 different hand-held transmitters. To operate the remote control, the buttons on the interior mirror must be programmed with the desired functions. The hand-held transmitter for the particular system is required in order to program the remote control. Before selling the vehicle, delete the stored functions for the sake of security. 1 LED Safety information 2 Programmable keys 3 Hand-held transmitters of the system WARNING Body parts can be jammed when operating remote-controlled systems, such as the garage door, using the integrated Universal Remote Control. There is a risk of injury or

218 Online Edition for Part no. 01402723835 - VI/18 Seite 219

Interior equipment CONTROLS

Programming Special feature of the rolling code wireless system General information If you are unable to operate the system af- 1. Switch on the ignition. ter repeated programming, please check if the system to be controlled features a roll- 2. Initial setup: ing code radio system. Press and hold the two outer buttons on Read the system's owner's manual, or press the interior mirror simultaneously for the programmed button on the interior mir- approximately 20 seconds until the LED ror longer. If the LED on the interior mirror on the interior mirror flashes. This starts flashing rapidly and then stays lit erases all programming of the buttons constantly for 2 seconds, the system fea- on the interior mirror. tures a rolling code radio system. Flashing 3. Hold the hand-held transmitter for the and continuous illumination of the LED will system to be controlled approx. 1 to repeat for approximately 20 seconds. 3 inches/2.5 to 8 cm away from the but- For systems with a rolling code radio sys- tons of the interior mirror. The required tem, the integrated Universal Remote Con- distance depends on the hand-held trol and the system also have to be transmitter. synchronized. 4. Simultaneously press and hold the but- Please read the owner's manual to find out ton of the desired function on the hand- how to synchronize the system. held transmitter and the button to be programmed on the interior mirror. The Synchronizing is easier with the aid of a LED on the interior mirror will begin second person. flashing slowly. Synchronizing the universal remote control 5. Release both buttons as soon as the LED with the system: flashes more rapidly. The LED flashing 1. Park the vehicle within range of the re- faster indicates that the button on the mote-controlled system. interior mirror has been programmed. 2. Program the relevant button on the inte- If the LED does not flash faster after at rior mirror as described. least 60 seconds, change the distance between the interior mirror and the 3. Locate and press the synchronizing but- hand-held transmitter and repeat the ton on the system being programmed. step. Several more attempts at different You have approx. 30 seconds for the distances may be necessary. Wait at next step. least 15 seconds between attempts. 4. Hold down the programmed button on Canada: if programming with the hand- the interior mirror for approximately held transmitter was interrupted, hold 3 seconds and then release it. If neces- down the interior mirror button and re- sary, repeat this step up to three times peatedly press and release the hand-held in order to finish synchronization. Once transmitter button for 2 seconds. synchronization is complete, the programmed function will be carried out. 6. To program other functions on other buttons, repeat steps 3 to 5. The systems can be controlled using the interior mirror buttons.

219 Online Edition for Part no. 01402723835 - VI/18 Seite 220

CONTROLS Interior equipment

Reprogramming individual buttons system is clear during programming and operation. Also follow the safety informa- 1. Switch on the ignition. tion of the hand-held transmitter. 2. Press and hold the interior mirror button to be programmed. The system, such as the garage door, can be 3. As soon as the interior mirror LED operated using the button on the interior starts flashing slowly, hold the hand- mirror while the engine is running or when held transmitter for the system to be the ignition is started. To do this, hold down controlled approx. 1 to 3 inches/2.5 to the button within receiving range of the 8 cm away from the buttons of the inte- system until the function is activated. The rior mirror. The required distance de- interior mirror LED stays lit while the wire- pends on the hand-held transmitter. less signal is being transmitted. 4. Likewise, press and hold the button of the desired function on the hand-held Deleting stored functions transmitter. Press and hold the two outer buttons on the 5. Release both buttons as soon as the in- interior mirror simultaneously for approxi- terior mirror LED flashes more rapidly. mately 20 seconds until the LED on the in- The LED flashing faster indicates that terior mirror flashes rapidly. All stored func- the button on the interior mirror has tions will be deleted. The functions cannot been programmed. The system can then be deleted individually. be controlled by the button on the interior mirror. If the LED does not flash faster after at Digital compass most 60 seconds, change the distance and repeat the programming starting Overview with step 4. Several more attempts at different distances may be necessary. Wait at least 15 seconds between attempts. Canada: if programming with the hand- held transmitter was interrupted, hold down the interior mirror button and repeatedly press and release the hand-held transmitter button for 2 seconds. Operation 1 Control button 2 Mirror display WARNING Body parts can be jammed when operating Mirror display remote-controlled systems, such as the ga- The point of the compass is displayed in the rage door, using the integrated Universal mirror when driving straight. Remote Control. There is a risk of injury or risk of damage to property. Make sure that the area of movement of the respective

220 Online Edition for Part no. 01402723835 - VI/18 Seite 221

Interior equipment CONTROLS

Operating concept – 6 to 9 seconds: compass calibration. Various functions can be called up by press- – 9 to 12 seconds: left/right-hand steering ing the control button with a pointed object, setting. such as the tip of a ballpoint pen or similar – 12 to 15 seconds: language setting. object. The following setting options are displayed in succession, depending on how Setting the compass zones long the control button is pressed: Sets the particular compass zones on the ve- – Pressed briefly: turns display on/off. hicle so that the compass operates correctly; – 3 to 6 seconds: compass zone setting. refer to World map with compass zones.

World map with magnetic zones

Procedure Calibrating the digital compass 1. Press and hold the control button for ap- The digital compass must be calibrated in prox. 3 to 4 seconds. The number of the the event of the following: set compass zone appears in the mirror. – The wrong compass point is displayed. 2. To change the zone setting, press the – The point of the compass displayed does control button quickly and repeatedly not change despite changing the direc- until the number of the compass zone tion of travel. that corresponds with your location appears in the mirror. – Not all points of the compass are displayed. The set zone is stored automatically. The compass is ready for use again after approximately 10 seconds.

221 Online Edition for Part no. 01402723835 - VI/18 Seite 222

CONTROLS Interior equipment

Procedure Ashtray/cigarette lighter 1. Make sure that there are no large metallic objects or overhead power lines near Overview the vehicle and that there is sufficient room to drive around in a circle. 2. Set the currently applicable compass zone. 3. Press and hold the control button for approx. 6 to 7 seconds so that "C" appears on the display. Next, drive in a complete circle at least once at a speed of no more than 4 mph/7 km/h. If calibration is successful, the "C" is replaced by the points of the compass. The ashtray is located in one of the frontal cup holders, the cigarette lighter above it in Left/right-hand steering the center console. The digital compass is already set for right or left-hand steering at the factory. Ashtray In order to empty the ashtray, remove the Setting the language ashtray from the cup holder. Press and hold the control button for approx. 12 to 13 seconds. Briefly press the Cigarette lighter control button again to switch between English "E" and German "O". Safety information Settings are stored automatically after approximately 10 seconds. WARNING Contact with the hot heating element or the hot socket of the cigarette lighter can Sun visor cause burns. Flammable materials can ignite if the cigarette lighter falls down or is Glare shield held against the respective objects. There To provide protection against glare, fold the is a risk of fire and injuries. Take hold of sun visor down or pivot it to the side. the cigarette lighter by its handle. Make sure that children do not use the cigarette Vanity mirror lighter and burn themselves. A vanity mirror is located in the sun visor behind a cover. When the cover is opened, the mirror lighting switches on.

222 Online Edition for Part no. 01402723835 - VI/18 Seite 223

Interior equipment CONTROLS

NOTICE NOTICE If metal objects fall into the socket, they Battery chargers for the vehicle battery can cause a short circuit. There is a risk of can work with high voltages and currents, damage to property. Replace the cigarette which means that the 12 volt on-board lighter or socket cover again after using network can be overloaded or damaged. the socket. There is a risk of damage to property. Only connect battery chargers for the vehicle battery to the starting aid terminals in the Operation engine compartment. Push in the cigarette lighter. The cigarette lighter can be removed as soon as it pops NOTICE back out. If metal objects fall into the socket, they can cause a short circuit. There is a risk of damage to property. Replace the cigarette lighter or socket cover again after using Sockets the socket.

Concept In the center console The lighter socket can be used as a socket for electrical equipment while the ignition is switched on or the engine is running. General information The total load of all sockets must not exceed 140 watts at 12 volts. Do not damage the socket by using non- compatible connectors. Remove the cover or cigarette lighter. Safety information

WARNING Devices and cables in the unfolding area of the airbags, such as portable navigation devices, can hinder the unfolding of the airbag or be thrown around in the car's interior during unfolding. There is a risk of injury. Make sure that devices and cables are not in the airbag's area of unfolding.

223 Online Edition for Part no. 01402723835 - VI/18 Seite 224

CONTROLS Interior equipment

In the cargo area In the rear center console

The socket is located on the right side in One USB dual charge socket is located in the cargo area. the rear center console.

Under the center armrest USB interface

Concept Mobile devices with USB port can be connected to the USB interface. General information Follow the information regarding the connection of mobile devices to the USB interface in the section on USB connections, re- The USB interface is located under the cen- fer to page 61. ter armrest. In the front center console

The USB interface is located in the front of the center console.

224 Online Edition for Part no. 01402723835 - VI/18 Seite 225

Storage compartments CONTROLS

Storage compartments

Vehicle features and options – Glove compartment on the front passenger side. This chapter describes all standard, country- – Storage compartment under the driver's specific and optional features offered with seat. the series. It also describes features that are – Compartments in the doors. not necessarily available in your vehicle, – Storage compartment in the center arm- e. g., due to the selected options or country rest. versions. This also applies to safety-related – Storage compartment in front of the cup functions and systems. When using these holders. functions and systems, the applicable laws and regulations must be observed. – Clothes hooks – Storage compartments in the cargo area. – Storage tray in the center console. Safety information – Pockets on the backrests of the front seats.

WARNING Loose objects or devices with a cable con- Glove compartment nection to the vehicle, for instance mobile phones, can be thrown into the car's inte- Safety information rior while driving, for instance in the event of an accident or during braking and evasive maneuvers. There is a risk of in- WARNING jury. Secure loose objects or devices with Folded open, the glove compartment pro- a cable connection to the vehicle in the trudes in the car's interior. Objects in the car's interior. glove compartment can be thrown into the car's interior while driving, for instance in the event of an accident or during braking NOTICE and evasive maneuvers. There is a risk of Anti-slip pads such as anti-slip mats can injury. Always close the glove compart- damage the dashboard. There is a risk of ment immediately after using it. damage to property. Do not use anti-slip pads.

Overview

The following storage compartments are available in the car's interior:

225 Online Edition for Part no. 01402723835 - VI/18 Seite 226

CONTROLS Storage compartments

Opening breakable objects in closed storage compartments.

Center armrest

General information The center armrest contains a storage compartment. Pull the handle. Opening The light in the glove compartment switches on.

Closing Fold up the cover.

Driver's seat

There is a storage compartment under the Press button, arrow 1, and open center arm- driver's seat. rest upward, arrow 2.

Compartments in the doors Set the incline The center armrest can be adjusted in several tilt settings. General information There are storage compartments in the doors. Cup holders

Safety information Safety information

WARNING NOTICE Breakable objects, such as glass bottles or Unsuitable containers in the cup holder glasses, can break in the event of an acci- and hot beverages can damage the cup dent or a braking or evasive maneuver. holder and increase the risk of injury in Broken glass can be scattered in the car's the event of an accident. There is a risk of interior. There is a risk of injury or risk of injury or risk of damage to property. Use damage to property. Do not use any break- light-weight, unbreakable, and sealable able objects while driving. Only stow containers. Do not transport hot bever-

226 Online Edition for Part no. 01402723835 - VI/18 Seite 227

Storage compartments CONTROLS

ages. Do not force objects into the cup Safety information holder. NOTICE Front With an open cup holder, the center armrest cannot be folded back up. There is a risk of damage to property. Press back the covers before the center armrest is folded up.

Clothes hooks

General information In the center console. The clothes hooks are located above the rear doors. Rear Safety information General information The cup holder is located in the center arm- WARNING rest. Clothing articles on the clothes hooks can obstruct the view while driving. There is a risk of an accident. When suspending clothing articles from the clothes hooks, ensure that they will not obstruct the driver's view.

WARNING Improper use of the clothes hooks can lead Pull the center armrest forward at the strap. to a risk of objects flying about during To open: press the button. braking and evasive maneuvers. There is a To close: push both covers back in, one after risk of injury and risk of damage to prop- the other. erty. Only hang lightweight objects, for instance clothing articles, from the clothes hooks.

227 Online Edition for Part no. 01402723835 - VI/18 Seite 228

CONTROLS Cargo area

Cargo area

Vehicle features and options a cable connection to the vehicle in the car's interior. This chapter describes all standard, country- specific and optional features offered with the series. It also describes features that are WARNING not necessarily available in your vehicle, Improperly stowed objects can shift and e. g., due to the selected options or country be thrown into the car's interior, for in- versions. This also applies to safety-related stance in the event of an accident or dur- functions and systems. When using these ing braking and evasive maneuvers. Vehi- functions and systems, the applicable laws cle occupants can be hit and injured. There and regulations must be observed. is a risk of injury. Stow and secure objects and cargo properly. Loading NOTICE Safety information Fluids in the cargo area can cause damage. There is a risk of damage to property. Make sure that no fluids leak in the cargo WARNING area. High gross weight can overheat the tires, damage them internally and cause a sudden drop in tire inflation pressure. Driving Steps for Determining Correct Load characteristics may be negatively im- Limit pacted, reducing lane stability, lengthen- 1. Locate the statement “The combined ing the braking distances and changing weight of occupants and cargo should the steering response. There is a risk of an never exceed XXX kg or XXX lbs.” on accident. Pay attention to the permitted your vehicle’s placard. load capacity of the tires and never exceed the permitted gross weight. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. WARNING 3. Subtract the combined weight of the Loose objects or devices with a cable con- driver and passengers from XXX kg or nection to the vehicle, for instance mobile XXX lbs. phones, can be thrown into the car's inte- 4. The resulting figure equals the available rior while driving, for instance in the amount of cargo and luggage load ca- event of an accident or during braking and pacity. For example, if the “XXX” evasive maneuvers. There is a risk of in- amount equals 1,400 lbs. and there will jury. Secure loose objects or devices with be five 150 lb passengers in your vehicle, the amount of available cargo and

228 Online Edition for Part no. 01402723835 - VI/18 Seite 229

Cargo area CONTROLS

luggage load capacity is 650 lbs. (1,400– – Do not stack cargo above the top edge of 750 (5 x 150) = 650 lbs.) the backrests. 5. Determine the combined weight of lug- – Small and light cargo: secure with gage and cargo being loaded on the ve- ratchet straps or draw straps. hicle. That weight may not safely exceed – Larger and heavy cargo: secure with the available cargo and luggage load ca- cargo straps. pacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred Lashing eyes in the cargo area to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Load

With storage compartment package: to secure the cargo there are four lashing eyes in the cargo area. Attach load securing aids, such as lashing straps, retaining straps, draw straps or cargo nets, to the lashing eyes in the cargo The maximum load is the sum of the weight area. of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported. Cargo cover

Stowing and securing cargo General information – Cover sharp edges and corners on the When the tailgate is opened, the cargo cargo. cover is raised. – Heavy cargo: stow as far forward as possible, directly behind and at the bottom Safety information of the rear passenger seat backrests. – Very heavy cargo: when the rear seat is WARNING not occupied, secure each of the outer safety belts in the opposite buckle. Loose objects or devices with a cable connection to the vehicle, for instance mobile – If necessary, fold down the rear back- phones, can be thrown into the car's inte- rests to stow large cargo. rior while driving, for instance in the event of an accident or during braking and

229 Online Edition for Part no. 01402723835 - VI/18 Seite 230

CONTROLS Cargo area

evasive maneuvers. There is a risk of in- Multi-function hook jury. Secure loose objects or devices with a cable connection to the vehicle in the car's interior. WARNING Improper use of the multi-function hooks can lead to a risk of objects flying about Removing during braking and evasive maneuvers, For storing bulky objects the cargo cover for example. There is a risk of injury and can be removed. risk of damage to property. Only hang lightweight objects, such as shopping 1. Detach the left and right retaining bags, from the multi-function hooks. Only straps at the tailgate. transport heavy luggage in the cargo area 2. Pull the cargo cover out of the brackets if it has been appropriately secured. on the left and right.

The cargo area contains two multi-function Installing hooks. 1. Slide the cargo cover forward horizon- tally into the two side brackets until it audibly engages. Enlarging the cargo area 2. Attach the left and right retaining straps at the tailgate. Concept Depending on the vehicle equipment, the Storage compartments in the cargo area can be enlarged as follows: – The rear seat backrests can be folded cargo area down. – The rear seat backrests can be moved Storage compartment on the side into an upright loading position using A storage compartment is located on the left the cargo setting. side. General information The rear seat backrest is divided at a ratio of 40–20–40. The side rear seat backrests and the center section can be folded down separately.

230 Online Edition for Part no. 01402723835 - VI/18 Seite 231

Cargo area CONTROLS

The rear seat backrests can be folded down backrests are securely engaged or locked. from the rear. If possible, adjust the height of the head restraints or remove them. Safety information

WARNING WARNING Danger of jamming with folding down the Body parts can be jammed when moving backrests. There is a risk of injury or risk the head restraint. There is a risk of injury. of damage to property. Make sure that the Make sure that the area of movement is area of movement of the rear backrest and clear when moving the head restraint. the of the head restraint is clear prior to folding down. Folding down the rear seat backrest from the rear WARNING If a rear seat backrest is not locked, unsecured cargo can be thrown into the car's interior; for instance, in the event of an accident, braking or an evasive maneuver. There is a risk of injury. Make sure that the rear seat backrest is locked after folding it back.

Pull the strap. The rear seat backrest folds WARNING forward. Unexpected movements of the rear seat backrest while driving may occur due to Cargo position unintentional unlocking of the rear seat backrests by the straps. There is a risk of Concept injury. Do not fasten any objects to the The rear seat backrests can be moved into straps for unlocking the rear backrests. an upright loading position individually. An adjustment in several tilt stages is possible as needed. WARNING The stability of the child restraint system is limited or compromised with incorrect seat adjustment or improper installation of the child seat. There is a risk of injuries or danger to life. Make sure that the child restraint system fits securely against the backrest. If possible, adjust the backrest tilt for all affected backrests and correctly adjust the seats. Make sure that seats and

231 Online Edition for Part no. 01402723835 - VI/18 Seite 232

CONTROLS Cargo area

Settings With a cargo position: 1. Pull the strap. 1. Pull the strap.

2. Set the loading position of the rear seat 2. Fold the rear seat backrest rearward. backrest as required. The rear seat backrest first engages in 3. Engage the rear seat backrest. the loading position. 3. Pull the strap again. Folding back the backrest 4. Return the rear seat backrest to the up- Without a cargo position: right seating position and engage it. 1. Pull the strap. Variable cargo area floor

Concept With the variable cargo area floor, the cargo area can be configured corresponding to transport requirements. General information 2. Return the rear seat backrest to the up- Follow instructions on securing cargo, refer right seating position and engage it. to page 228.

232 Online Edition for Part no. 01402723835 - VI/18 Seite 233

Cargo area CONTROLS

Removing the cargo floor panel Folded up position 1. Fold down the rear seat backrest, refer to page 230. Safety information 2. Fold the rear part of the cargo floor panel upward. WARNING Improper use of the variable cargo floor panel can lead to a danger of objects flying about during braking and evasive maneuvers. There is a risk of injury and risk of damage to property. – Do not use the variable cargo floor panel to separate the cargo area and car's interior in the sense of a parti- tion net. 3. Grasp the cargo floor panel in the rear – Only use the variable cargo floor and fold up above the locking point of panel in the folded-up position when the upper position, refer to page 233. the backrests are folded up and locked. 4. Pull the cargo floor panel backward from the brackets. – Fold down the variable cargo floor panel before driving off. Inserting the cargo floor panel – Always secure cargo against shifting, using straps, belts and lashing eyes, 1. Push the cargo area floor into the sup- for instance. ports at a shallow angle. The cargo area floor must engage noticeably. Fold up the cargo floor panel Fold the rear part of the cargo floor panel upward.

2. Fold the cargo area floor over downward.

Fold up the cargo floor panel. You've reached the maximum cargo height.

233 Online Edition for Part no. 01402723835 - VI/18 Seite 234

CONTROLS Cargo area

MINI Picnic Bench Mounting 1. Fold the rear part of the cargo floor Concept panel upward. The MINI Picnic Bench provides a comfortable seating surface on the loading lip of the vehicle. General information Only use the MINI Picnic Bench while the vehicle is parked and with the tailgate open. When the MINI Picnic Bench is not in use, fold it together to prevent soiling and damage. 2. Place the MINI Picnic Bench on the In vehicles with a no-touch opening and front part of the cargo floor panel and at- closing tailgate: tach it to the rear part of the cargo floor panel using the four snaps. If the remote control is in the sensor area, the tailgate can be opened or closed inad- vertently by an unconscious or alleged recognized foot movement. The sensor has an approximate range of 5 ft/1.50 m extending from the rear of the vehicle. Safety information

3. Fold down the MINI Picnic Bench to- WARNING ward the rear. The MINI Picnic Bench is Body parts can be jammed when operating fastened with magnets. the tailgate. There is a risk of injury. Make sure that the area of movement of the tailgate is clear during opening and closing.

Overview The MINI Picnic Bench is located on the underside of the cargo area floor.

4. Fold the rear part of the cargo area floor downward. To disassemble the MINI Picnic Bench, proceed in reverse order.

234 Online Edition for Part no. 01402723835 - VI/18 Seite 235

Cargo area CONTROLS

Folding down The MINI Picnic Bench swings against the underside of the cargo area floor and is fas- 1. Lift the rear part of the cargo area floor. tened there with magnets.

2. Grasp the MINI Picnic Bench in the middle and pull it back and up against the force of the magnets.

3. Fold the rear part of the cargo area floor downward and place the MINI Picnic Bench over the loading lip of the cargo area. Place a protective cloth over the bumper.

Folding up Fold rear part of the cargo floor panel upward.

235 Online Edition for Part no. 01402723835 - VI/18

236 Online Edition for Part no. 01402723835 - VI/18 DRIVING TIPS

Things to remember when driving ...... 238 Saving fuel ...... 243

237 Online Edition for Part no. 01402723835 - VI/18 Seite 238

DRIVING TIPS Things to remember when driving

Things to remember when driving

Vehicle features and options Engine, transmission, and axle drive This chapter describes all standard, country- specific and optional features offered with Up to 1,200 miles/2,000 km the series. It also describes features that are Do not exceed the maximum engine and not necessarily available in your vehicle, road speed: e. g., due to the selected options or country – For gasoline engine 4,500 rpm and versions. This also applies to safety-related 100 mph/160 km/h. functions and systems. When using these functions and systems, the applicable laws Avoid full load or kickdown under all cir- and regulations must be observed. cumstances. From 1,200 miles/2,000 km Breaking-in period The engine and vehicle speed can gradually be increased. General information Tires Moving parts need to begin working to- Tire traction is not optimal due to manufac- gether smoothly. turing circumstances when tires are brand- The following instructions will help you to new; they achieve their full traction poten- achieve a long vehicle life and good effi- tial after a break-in time. ciency. Drive conservatively for the first During break-in, do not use the Launch 200 miles/300 km. Control, refer to page 135. Brake system Safety information Brake discs and brake pads only reach their full effectiveness after ap- WARNING prox. 300 miles/500 km. Drive moderately Due to new parts and components, safety during this break-in period. and driver assistance systems can react with a delay. There is a risk of an accident. Clutch After installing new parts or with a new The function of the clutch reaches its opti- vehicle, drive conservatively and inter- mal level only after a distance driven of ap- vene early if necessary. Observe the break- prox. 300 miles/500 km. During this break- in procedures of the respective parts and in period, engage the clutch gently. components. Following part replacement The same break-in procedures should be observed if any of the components above-men-

238 Online Edition for Part no. 01402723835 - VI/18 Seite 239

Things to remember when driving DRIVING TIPS

tioned have to be renewed in the course of sure that no combustible materials can the vehicle's operating life. come in contact with hot vehicle parts in driving operation, idle or during parking. Do not touch the hot exhaust gas system. General driving notes Mobile communication devices in Closing the tailgate the vehicle Safety information WARNING WARNING Vehicle electronics and mobile phones can influence one another. There is radiation An open tailgate protrudes from the vehi- due to the transmission operations of mo- cle and can endanger occupants and other bile phones. There is a risk of injury or traffic participants or damage the vehicle risk of damage to property. If possible, in in the event of an accident, braking or eva- the car's interior use only mobile phones sive maneuvers. In addition, exhaust with direct connections to an exterior an- fumes may enter the car's interior. There tenna in order to exclude mutual interfer- is a risk of injury or risk of damage to ence and deflect the radiation from the property. Do not drive with the tailgate car's interior. open.

Hydroplaning Driving with the tailgate open On wet or slushy roads, a wedge of water If driving with the tailgate open cannot be can form between the tires and road sur- avoided: face. – Close all windows and the glass sunroof. This phenomenon is referred to as hydro- – Greatly increase the air flow from the planing. It is characterized by a partial or vents. complete loss of contact between the tires – Drive moderately. and the road surface, ultimately undermin- ing your ability to steer and brake the vehi- Hot exhaust gas system cle. Driving through water WARNING During driving operation, high tempera- General information tures can occur underneath the vehicle When driving through water, follow the fol- body, for instance caused by the exhaust lowing: gas system. If combustible materials, such as leaves or grass, come in contact with – Drive through calm water only. hot parts of the exhaust gas system, these – Drive through water only if it is not materials can ignite. There is a risk of in- deeper than maximum 9.8 inches/25 cm. jury or risk of damage to property. Do not – Drive through water no faster than remove the heat shields installed and walking speed, up to 3 mph/5 km/h. never apply undercoating to them. Make

239 Online Edition for Part no. 01402723835 - VI/18 Seite 240

DRIVING TIPS Things to remember when driving

Safety information securely fastened again after they were removed, for instance for cleaning. NOTICE When driving too quickly through too Driving in wet conditions deep water, water can enter into the en- When roads are wet, salted, or in heavy gine compartment, the electrical system or rain, gently press the brake pedal every few the transmission. There is a risk of damage miles. to property. When driving through water, Ensure that this action does not endanger do not exceed the maximum indicated wa- other traffic. ter level and the maximum speed for driving through water. The heat generated during braking dries brake discs and brake pads and protects them against corrosion. Braking safely In this way braking efficiency will be available when you need it. General information The vehicle is equipped with ABS as a Hills standard feature. Perform an emergency stop in situations General information that require such. Drive long or steep downhill gradients in Steering is still responsive. You can still the gear that requires least braking effort. avoid any obstacles with a minimum of Otherwise, the brakes may overheat and re- steering effort. duce brake efficiency. Pulsation of the brake pedal and sounds You can increase the engine's braking effect from the hydraulic circuits indicate that by shifting down, going all the way to first ABS is in its active mode. gear, if needed.

Objects in the area around the pedals Safety information

WARNING WARNING Light but consistent brake pressure can Objects in the driver's floor area can limit lead to high temperatures, brakes wearing the pedal distance or block a depressed out and possibly even brake failure. There pedal. There is a risk of an accident. Stow is a risk of an accident. Avoid placing ex- objects in the vehicle such that they are cessive stress on the brake system. secured and cannot enter into the driver's floor area. Use floor mats that are suitable for the vehicle and can be safely attached to the floor. Do not use loose floor mats WARNING and do not layer several floor mats. Make In idle state or with the engine switched sure that there is sufficient clearance for off, safety-relevant functions, for instance the pedals. Ensure that the floor mats are engine braking effect, braking force boost and steering assistance, are restricted or not available at all. There is a risk of an ac-

240 Online Edition for Part no. 01402723835 - VI/18 Seite 241

Things to remember when driving DRIVING TIPS

cident. Do not drive in idle state or with Roof racks are available as special accesso- the engine switched off. ries. Securing Brake disc corrosion Follow the installation instructions of the Corrosion on the brake discs and contami- roof rack. nation on the brake pads are increased by the following circumstances: Loading – Low mileage. Because roof-mounted luggage racks raise – Extended periods when the vehicle is the vehicle's center of gravity when loaded, not used at all. they have a major effect on vehicle handling – Infrequent use of the brakes. and steering response. – Aggressive, acidic, or alkaline cleaning Therefore, note the following when loading agents. and driving: Corrosion buildup on the brake discs will – Do not exceed the approved roof/axle cause a pulsating effect on the brakes in loads and the approved gross vehicle their response - generally this cannot be weight. corrected. – Be sure that adequate clearance is maintained for tilting and opening the glass Condensation water under the sunroof. parked vehicle – Distribute the roof load uniformly. When using the automatic climate control, – The roof load should not extend past the condensation water develops and collects loading area. underneath the vehicle. – Always place the heaviest pieces on the bottom. Ground clearance – Secure the roof luggage firmly, for instance using ratchet straps. NOTICE – Do not let objects project into the open- If ground clearance is insufficient, there ing path of the tailgate. might be contact with the front or rear – Drive cautiously and avoid sudden ac- spoiler, for instance when driving over celeration and braking maneuvers. Take curbs or entering into underground vehi- corners gently. cle parking garages. There is a risk of damage to property. Ensure that there is sufficient ground clearance available. Driving on poor roads

Concept Roof-mounted luggage rack Because of its greater ground clearance, the vehicle can be driven on a variety of road General information types and qualities. Installation only possible with roof rack. All-wheel drive can help improve forward momentum.

241 Online Edition for Part no. 01402723835 - VI/18 Seite 242

DRIVING TIPS Things to remember when driving

Safety information Driving on racetracks

NOTICE Higher mechanical and thermal loads during Objects in unpaved areas, for instance racetrack operation lead to increased wear. stones or branches, can damage the vehi- This wear is not covered by the warranty. cle. There is a risk of damage to property. The vehicle is not designed for use in motor Do not drive on unpaved terrain. sports competition.

When driving on poor roads For your own safety, for the safety of passengers and of the vehicle, heed the following points: – Familiarize yourself with the vehicle before driving. – Do not take risks when driving. – Adjust the speed to the road surface conditions. The steeper and more uneven the road surface, the slower the speed. – When driving on steep uphill or downhill grades: add engine oil and coolant up to near the MAX mark. – Avoid that the chassis bottom coming in contact with the ground. The ground clearance may vary depending on the vehicle load. – When wheels continue to spin, depress the accelerator so that driving stability control systems can distribute the driving force to the wheels. Activate DTC Dynamic Traction Control if available. After a trip on poor roads Note the following to maintain driving safety: – Clear heavy soiling from the body. – Keep the wheels and tires free of mud, snow, ice, etc., and check them for damage.

242 Online Edition for Part no. 01402723835 - VI/18 Seite 243

Saving fuel DRIVING TIPS

Saving fuel

Vehicle features and options Attached parts on the vehicle impair the aerodynamics and increase the fuel consumption. This chapter describes all standard, country- specific and optional features offered with the series. It also describes features that are not necessarily available in your vehicle, Close the windows and glass e. g., due to the selected options or country sunroof versions. This also applies to safety-related functions and systems. When using these Driving with the glass sunroof and windows functions and systems, the applicable laws open results in increased air resistance and and regulations must be observed. raises fuel consumption.

General information Tires

The vehicle contains advanced technologies General information for the reduction of fuel consumption and emission values. Tires can affect fuel consumption in various ways, for instance tire size may influence Fuel consumption depends on a number of fuel consumption. different factors. The implementation of certain measures, Check the tire inflation pressure driving style and regular maintenance can influence fuel consumption and environ- regularly mental impact. Check and, if needed, correct the tire inflation pressure at least twice a month and before starting on a long trip. Remove unnecessary cargo Low tire inflation pressure increases rolling resistance and thus raises fuel consumption Additional weight increases fuel consump- and tire wear. tion. Drive away without delay Remove attached parts follow- Do not wait for the engine to warm-up ing use while the vehicle remains stationary. Start driving right away, but at moderate engine Remove auxiliary mirrors, roof-mounted or speeds. rear luggage racks which are no longer re- This is the fastest way for the cold engine quired following use. to reach its operating temperature.

243 Online Edition for Part no. 01402723835 - VI/18 Seite 244

DRIVING TIPS Saving fuel

Look well ahead when driving If the engine is switched off and then re- started rather than leaving the engine running constantly, fuel consumption and emis- Driving smoothly and proactively reduces sions are reduced. Savings can begin within fuel consumption. a few seconds of switching off the engine. Avoid unnecessary acceleration and brak- In addition, fuel consumption is also deter- ing. mined by other factors, such as driving By maintaining a suitable distance to the style, road conditions, maintenance or envi- vehicle driving ahead of you. ronmental factors.

Avoid high engine speeds Switch off any functions that are not currently needed Driving at low engine speeds lowers fuel consumption and reduces wear. Functions such as seat heating and the rear If necessary, observe the vehicle's gear shift window defroster require a lot of energy indicator, refer to page 145. and consume additional fuel, especially in city and stop-and-go traffic. Switch off these functions if they are not Use coasting conditions needed.

When approaching a red light, take your foot off the accelerator and let the vehicle Have maintenance carried out coast to a halt. For going downhill take your foot off the ac- Have the vehicle maintained regularly to celerator and let the vehicle roll. achieve optimal vehicle efficiency and serv- The flow of fuel is interrupted while coast- ice life. MINI recommends that mainte- ing. nance work be performed by a MINI service center. Also note the MINI maintenance systems, Switch off the engine during refer to page 285. longer stops GREEN Mode Switching off the engine Switch off the engine during longer stops, for instance at traffic lights, railroad cross- Concept ings or in traffic congestion. GREEN Mode supports a driving style that saves on fuel consumption. For this pur- Auto Start/Stop function pose, the engine control and comfort features, for instance the climate control out- The Auto Start/Stop function of the vehicle put, are adjusted. automatically switches off the engine during a stop. For Steptronic transmission:

244 Online Edition for Part no. 01402723835 - VI/18 Seite 245

Saving fuel DRIVING TIPS

Under certain conditions the engine is auto- Via the Central Information Display matically decoupled from the transmission (CID) in the D selector lever position. The vehicle 1. "My MINI" continues traveling with the engine idling to reduce fuel consumption. The D selector 2. "Vehicle settings" lever position remains engaged. 3. "Configure GREEN" In addition, context-sensitive instructions 4. Select the desired setting. are displayed to assist with an optimized fuel consumption driving style. Activating/deactivating the functions The achieved extended range is displayed in The following functions can be activated/ the instrument cluster as bonus range. deactivated: General information – "GREEN speed warning": The system includes the following MINI- – "GREEN climate control" MALISM functions and MINIMALISM dis- Settings are stored for the driver profile plays: currently used. – GREEN bonus range, refer to page 246. GREEN Limit – GREEN tip, driving instruction, refer to page 246. – Activate the GREEN Limit: – GREEN climate control, refer to "GREEN speed warning": page 245. A GREEN tip is displayed if the speed of – MINIMALISM analyzer, refer to the set GREEN Limit is exceeded. page 248. – Setting the speed for the GREEN Limit: – Coasting driving condition, refer to "Tip at:" page 247. Select the desired speed.

Activating GREEN Mode GREEN climate control Press the MINI Driving Modes Climate control is set to be efficient. switch downward until By making a slight change to the set tem- GREEN is displayed in the in- perature, or adjusting the rate of heating or strument cluster. cooling of the car's interior consumption can be economized. The power output to the seat heater and ex- Configuring GREEN terior mirror is reduced.

Via MINI Driving Modes switch GREEN potential savings 1. Activating GREEN Mode. Shows potential savings with the current 2. "Configure GREEN" settings in percentages. 3. Select the desired setting.

245 Online Edition for Part no. 01402723835 - VI/18 Seite 246

DRIVING TIPS Saving fuel

Display in the instrument cluster GREEN tip, driving instruction

GREEN bonus range A modified driving style helps you extend your driving range. This may be displayed as the bonus range in the instrument cluster. The bonus range is shown in the range display. The GREEN tip indicates that your driving The bonus range is automatically reset ev- style can be modified to be more efficient, ery time the vehicle is refueled. for example by backing off the accelerator. – Green display: efficient driving style. – Gray display: modify driving style, for Activating/deactivating the display instance by backing off the accelerator Activate information relating to the driving pedal. style and GREEN tips in the instrument cluster using the Central Information Dis- Efficiency display play (CID): A bar display in the instru- 1. "My MINI" ment cluster indicates your current driving efficiency. 2. "System settings" Mark in the left area, arrow 1: 3. "Displays" display for energy recovered 4. "Instrument panel" by coasting or when braking. 5. "GREEN info" Mark in the right area, arrow 2: display when accelerating. GREEN tip, symbols The efficiency of your driving style is An additional symbol and text instructions shown by the position of the mark: are displayed. – Mark inside the green range: efficient driving style. Symbol Measure – Mark outside the green range: modify For an efficient driving style, driving style, for example by backing off look well ahead when driving, the accelerator. accelerate conservatively, and delay accelerating. Reduce speed to the selected GREEN speed.

Steptronic transmission: Switch from M/S to D and avoid manual shift interventions.

246 Online Edition for Part no. 01402723835 - VI/18 Seite 247

Saving fuel DRIVING TIPS

Symbol Measure Coasting

Manual transmission: Concept Follow the shift instructions. The function helps to conserve fuel. Manual transmission: To do this, under certain conditions the en- Engage neutral for an engine gine is automatically decoupled from the stop. transmission when selector lever position D is set. The vehicle continues traveling with the engine idling to reduce fuel consump- Indications on the Control Display tion. Selector lever position D remains engaged. Displaying MINIMALISM information This driving condition is referred to as The current efficiency of the functions in coasting. GREEN Mode can be displayed on the Con- As soon as you step on the brake or acceler- trol Display. ator pedal, the engine is automatically cou- Via the Central Information Display (CID): pled again. 1. "My MINI" General information 2. "Technology in action" Coasting is a component of the GREEN driv- 3. "MINIMALISM" ing mode. Information is shown on the following func- Coasting is automatically activated when tions: the GREEN driving mode is called via the – Auto Start/Stop function. MINI Driving Modes switch, refer to – Energy recovery. page 186. – Climate control output. A proactive driving style helps the driver to use the function often and supports the – Coasting. fuel-conserving effect of coasting.

Displaying the MINIMALISM analyzer Functional requirements Via the Central Information Display (CID): The function is available in the speed range 1. "My MINI" from approx. 15 mph/25 km/h up to 100 mph/160 km/h. 2. "Technology in action" – Accelerator pedal and brake pedal are 3. "MINIMALISM Analyser" not operated. Further information on the MINIMALISM – The selector lever is in selector lever po- analyzer, refer to page 248. sition D. – Engine and transmission are at operat- Open GREEN Tip display ing temperature. Via the Central Information Display (CID): – With a camera in the area of the interior 1. "My MINI" mirror: the system does not detect any vehicles ahead of you. 2. "Technology in action" 3. "GREEN tips"

247 Online Edition for Part no. 01402723835 - VI/18 Seite 248

DRIVING TIPS Saving fuel

Operation via shift paddles – If driving in the dynamic limit range. – If driving on steep uphill or downhill Concept grades. Depending on your vehicle's equipment, the – The battery charge state is temporarily coasting mode can be influenced with the too low. shift paddles. – The vehicle electrical system is drawing excessive current. Activating/deactivating coasting via shift paddles MINIMALISM analyzer 1. Shift to the highest gear by pulling the right shift paddle. Concept 2. To activate coasting mode, actuate the The function helps develop an especially ef- right shift paddle again. ficient driving style and to conserve fuel. To deactivate, actuate the left shift paddle. For this purpose, the driving style is ana- lyzed. The assessment is done in various Display categories and is displayed on the Control Display. Display in the instrument cluster This display will help you adjust your driv- The bar display below the ing style and save some fuel. tachometer is filled in green The last 15 minutes of a trip are evaluated. and the mark appears at the zero point. The tachometer The range of the vehicle can be extended by shows the idle speed. adopting an efficient driving style. This gain in range is displayed as a bonus range in the instrument cluster and on the Control Dis- Indications on the Control Display play. The coasting driving condition is displayed in the MINIMALISM Info while driving. Functional requirement The distance traveled in the coasting driv- This function is available in GREEN Mode. ing condition is indicated by a counter. Displaying the MINIMALISM analyzer Displaying MINIMALISM information Via the Central Information Display (CID): Via the Central Information Display (CID): 1. "My MINI" 1. "My MINI" 2. "Technology in action" 2. "Technology in action" 3. "MINIMALISM Analyser" 3. "MINIMALISM" Display on the Control Display System limits The display of the MINIMALISM analyzer The function is not available if one of the consists of a fish in a water glass, a table of following conditions applies: values and the display of the achieved bo- – DSC OFF and TRACTION are activated. nus range. – Cruise control is activated.

248 Online Edition for Part no. 01402723835 - VI/18 Seite 249

Saving fuel DRIVING TIPS

The fish and the movements of the water in the bowl symbolize the efficiency of the driving style. The more efficient the driving style, the less the water sloshes around in the bowl and the better is the fish's mood. If the driving style is inefficient, the water oscillates, the fish's mood worsens, and a reduced number of stars is displayed. The table of values contains stars and evalu- ates the driving style in different categories. The more efficient the driving style, the more stars are displayed in the table. The bonus range achieved by a driving style that minimizes fuel consumption is displayed below the table of values. The more efficient the driving style, the faster the bonus range increases. To assist with an efficient driving style, GREEN tips are displayed while driving. Tips for an energy-saving driving style, Sav- ing fuel, refer to page 243.

249 Online Edition for Part no. 01402723835 - VI/18

250 Online Edition for Part no. 01402723835 - VI/18 MOBILITY

Refueling ...... 252 Fuel ...... 254 Wheels and tires ...... 256 Engine compartment ...... 276 Engine oil ...... 279 Coolant ...... 283 Maintenance ...... 285 Replacing components ...... 287 Breakdown assistance ...... 298 Care ...... 306

251 Online Edition for Part no. 01402723835 - VI/18 Seite 252

MOBILITY Refueling

Refueling

Vehicle features and options Fuel cap

This chapter describes all standard, country- Opening specific and optional features offered with 1. Briefly press the rear edge of the fuel the series. It also describes features that are filler flap. not necessarily available in your vehicle, e. g., due to the selected options or country versions. This also applies to safety-related functions and systems. When using these functions and systems, the applicable laws and regulations must be observed.

General information

Follow the fuel recommendation, refer to 2. Turn the fuel cap counterclockwise. page 254, prior to refueling.

Safety information

NOTICE With a driving range of less than 30 miles/50 km the engine may no longer have sufficient fuel. Engine functions are not ensured anymore. There is a risk of 3. Place the fuel cap in the bracket at- damage to property. Refuel promptly. tached to the fuel filler flap.

252 Online Edition for Part no. 01402723835 - VI/18 Seite 253

Refueling MOBILITY

Closing Safety information

WARNING NOTICE The retaining strap of the fuel cap can be Fuels are toxic and aggressive. Overfilling jammed and crushed during closing. The of the fuel tank can damage the fuel sys- cap cannot be correctly closed. Fuel or fuel tem. Painted surfaces may be damaged by vapors can escape. There is a risk of injury contact with fuel. Escaping fuel can harm or risk of damage to property. Pay atten- the environment. There is a risk of damage tion that the retaining strap is not jammed to property. Avoid overfilling. or crushed when closing the cap.

1. Fit the cap and turn it clockwise until you clearly hear a click. 2. Close the fuel filler flap.

Manually unlocking fuel filler flap E.g., in the event of an electrical malfunction. Have fuel filler flap unlocked by a dealer’s service center or another qualified service center or repair shop.

Follow the following when refueling

General information When refueling, insert the filler nozzle completely into the filler pipe. Lifting up the fuel pump nozzle during refueling causes: – Premature switching off. – Reduced return of the fuel vapors. The fuel tank is full when the filler nozzle clicks off the first time. Make sure that the fuel cap is closed properly after refueling, otherwise the emissions warning light may light up. Follow safety regulations posted at the gas station.

253 Online Edition for Part no. 01402723835 - VI/18 Seite 254

MOBILITY Fuel

Fuel

Vehicle features and options Safety information

This chapter describes all standard, country- NOTICE specific and optional features offered with Even small quantities of the wrong fuel or the series. It also describes features that are wrong fuel additives can damage the fuel not necessarily available in your vehicle, system and engine. Furthermore, the cata- e. g., due to the selected options or country lytic converter is permanently damaged. versions. This also applies to safety-related There is a risk of damage to property. Do functions and systems. When using these not refuel or add the following in the case functions and systems, the applicable laws of gasoline engines: and regulations must be observed. – Leaded gasoline. – Metallic additives, for instance man- Fuel recommendation ganese or iron. Do not press the Start/Stop button after refueling with the wrong fuel. Contact a General information dealer’s service center or another qualified Depending on the region, many gas stations service center or repair shop. sell fuel that has been customized to winter or summer conditions. Fuel that is available in winter, for instance helps make a cold NOTICE start easier. Incorrect fuels can damage the fuel system Gasoline and the engine. There is a risk of damage to property. Do not use fuels with a higher percentage of ethanol than recommended. General information Do not refuel with fuels containing metha- For the best fuel efficiency, the gasoline nol, e.g. M5 to M100. should be sulfur-free or very low in sulfur content. Fuels that are marked on the gas pump as NOTICE containing metal must not be used. Fuel that does not comply with the mini- Fuels with a maximum ethanol content of mum quality can compromise engine func- 25 %, i. e. E10 or E25, may be used for refu- tion or cause engine damage. There is a eling. risk of damage to property. Do not fill with Ethanol should meet the following quality fuel that does not comply with the mini- standards: mum quality. US: ASTM 4806–xx CAN: CGSB-3.511–xx xx: comply with the current standard in each case.

254 Online Edition for Part no. 01402723835 - VI/18 Seite 255

Fuel MOBILITY

CAUTION The use of poor-quality fuels may result in harmful engine deposits or damage. Addi- tionally, problems relating to drivability, starting and stalling, especially under certain environmental conditions such as high ambient temperature and high alti- tude, may occur. If drivability problems are encountered, we recommend switching to a high quality gasoline brand and a higher octane grade — AKI number — for a few tank fills. To avoid harmful engine deposits, it is highly recommended to purchase gasoline from Top Tier retailers. Failure to comply with these recommendations may result in the need for unsched- uled maintenance.

Recommended fuel grade MINI recommends AKI 91. John Cooper Works: Refuel with this gasoline to achieve the rated performance and consumption values.

Minimum fuel grade MINI recommends AKI 89. John Cooper Works: If you use gasoline with this minimum AKI Rating, the engine may produce knocking sounds when starting at high external temperatures. This has no effect on the engine life.

255 Online Edition for Part no. 01402723835 - VI/18 Seite 256

MOBILITY Wheels and tires

Wheels and tires

Vehicle features and options Tire inflation pressure specifications This chapter describes all standard, country- specific and optional features offered with In the tire inflation pressure table the series. It also describes features that are The tire inflation pressure table, refer to not necessarily available in your vehicle, page 257, contains all tire inflation pres- e. g., due to the selected options or country sure specifications for the specified tire versions. This also applies to safety-related sizes at the ambient temperature. The tire functions and systems. When using these inflation pressure values apply to tire sizes functions and systems, the applicable laws approved by the manufacturer of the vehicle and regulations must be observed. for the vehicle type. To identify the correct tire inflation pressure, please note the following: Tire inflation pressure – Tire sizes of your vehicle. – Maximum permitted driving speed. General information The tire characteristics and tire inflation Checking the tire inflation pressure pressure influence the following: – The service life of the tires. General information – Road safety. Tires heat up while driving. The tire infla- – Driving comfort. tion pressure increases with the tire temperature. – Fuel consumption. Tires have a natural, consistent loss of tire Safety information inflation pressure. The displays of inflation devices may under- read by up to 0.1 bar/2 psi. WARNING A tire with too little or no tire inflation Checking using tire inflation pressure pressure may heat up significantly and specifications in the tire inflation sustain damage. This will have a negative pressure table impact on aspects of handling, such as The tire inflation pressure specifications in steering and braking response. There is a the tire inflation pressure table only relate risk of an accident. Regularly check the to cold tires or tires at the same tempera- tire inflation pressure, and correct it as ture as the ambient temperature. needed, for instance twice a month and before a long trip. Only check the tire inflation pressure levels when the tires are cold, i.e.: – Driving range of max. 1.25 miles/2 km has not been exceeded.

256 Online Edition for Part no. 01402723835 - VI/18 Seite 257

Wheels and tires MOBILITY

– If the vehicle has not moved again for at least 2 hours after a trip. 1. Determine, refer to page 256, the intended tire inflation pressure levels for the mounted tires. 2. Check the tire inflation pressure in all four tires, using a pressure gage, for example. 3. Correct the tire inflation pressure if the These pressure values can also be found on current tire inflation pressure value de- the tire inflation pressure label on the driv- viates from the specified value. er's door pillar. 4. Check whether all valve caps are screwed onto the tire valves. Do not exceed a speed of 100 mph/ 160 km/h. After correcting the tire inflation pressure Tire inflation pressure values up to For run-flat tires: reinitialize run-flat tires. 100 mph/160 km/h For the Tire Pressure Monitor TPM: reset the Tire Pressure Monitor TPM. COOPER, COOPER ALL4 Tire size Pressure specifications Checking the tire inflation pressure of in bar/PSI the emergency wheel Also check the tire inflation pressure of the Specifications emergency wheel in the cargo area regu- in bar/PSI with larly, and correct it as needed. cold tires

Tire inflation pressures up to 225/55 R 17 97 2.2 / 32 2.2 / 32 100 mph/160 km/h W Std/RSC For speeds of up to 100 mph/160 km/h and 225/55 R 17 97 for optimum driving comfort, note the pres- H M+S A/S Std sure values in the tire inflation pressure ta- 225/55 R 17 97 ble, refer to page 257, and adjust as neces- H M+S Std/RSC sary. 225/50 R 18 95 W RSC 225/50 R 18 95 H M+S RSC 225/50 R 18 95 V M+S A/S Std/RSC 225/50 R 18 99 W XL Std

257 Online Edition for Part no. 01402723835 - VI/18 Seite 258

MOBILITY Wheels and tires

Tire size Pressure specifications JOHN COOPER WORKS in bar/PSI Tire size Pressure specifications 205/60 R 17 93 2.4 / 35 2.4 / 35 in bar/PSI H M+S Std 225/45 R 19 92 Specifications W RSC in bar/PSI with cold tires Emergency Speed up to a max. of wheel 50 mph / 80 km/h T 115/95 R 17 4.2 / 60 205/60 R 17 2.4 / 35 2.4 / 35 95 M 93 H M+S Std 225/50 R 18 COOPER S, COOPER S ALL4 95 V M+S A/S Std/RSC Tire size Pressure specifications 225/50 R 18 in bar/PSI 95 W RSC Specifications 225/50 R 18 in bar/PSI 95 H M+S RSC with cold tires 225/45 R 19 2.6 / 38 2.6 / 38 92 W RSC 225/55 R 17 2.2 / 32 2.2 / 32 97 H M+S Tire inflation pressures at max. Std/RSC speeds above 100 mph/160 km/h 225/50 R 18 95 W RSC WARNING 225/50 R 18 In order to drive at maximum speeds in ex- 95 H M+S RSC cess of 100 mph/160 km/h, please ob- 225/50 R 18 serve, and, if necessary, adjust tire pres- 95 V M+S A/S sures for speeds exceeding 100 mph/ Std/RSC 160 km/h from the relevant table on the following pages. Otherwise, tire damage 205/60 R 17 2.4 / 35 2.4 / 35 and accidents could occur. 93 H M+S Std 225/45 R 19 2.5 / 36 2.5 / 36 For speeds over 100 mph/160 km/h and for 92 W RSC optimum driving comfort, note the pressure values in the tire inflation pressure table, Speed up to a max. of Emergency refer to page 259, and adjust as necessary. wheel 50 mph / 80 km/h T 115/95 R 17 4.2 / 60 95 M

258 Online Edition for Part no. 01402723835 - VI/18 Seite 259

Wheels and tires MOBILITY

Tire inflation pressure values over COOPER S, COOPER S ALL4 100 mph/160 km/h Tire size Pressure specifications COOPER, COOPER ALL4 in bar/PSI Specifications Tire size Pressure specifications in bar/PSI in bar/PSI with cold tires Specifications in bar/PSI with 205/60 R 17 2.8 / 41 2.8 / 41 cold tires 93 H M+S Std 225/50 R 18 225/50 R 18 2.4 / 35 2.4 / 35 95 W RSC 95 W RSC 225/50 R 18 225/50 R 18 95 H M+S RSC 95 H M+S RSC 225/50 R 18 225/50 R 18 95 V M+S A/S 95 V M+S A/S Std/RSC Std/RSC 225/55 R 17 2.5 / 36 2.5 / 36 225/50 R 18 97 H M+S 99 W XL Std Std/RSC 225/55 R 17 2.2 / 32 2.2 / 32 225/45 R 19 3.0 / 44 3.0 / 44 97 W Std/RSC 92 W RSC 225/55 R 17 Emergency Speed up to a max. of 97 H M+S A/S wheel 50 mph / 80 km/h Std T 115/95 R 17 4.2 / 60 225/55 R 17 95 M 97 H M+S Std/RSC 205/60 R 17 2.6 / 38 2.6 / 38 93 H M+S Std 225/45 R 19 92 W RSC Emergency Speed up to a max. of wheel 50 mph / 80 km/h T 115/95 R 17 4.2 / 60 95 M

259 Online Edition for Part no. 01402723835 - VI/18 Seite 260

MOBILITY Wheels and tires

JOHN COOPER WORKS vehicle’s Gross Axle Weight Rating – GAWR. Note, front vs. rear GAWR and tire Tire size Pressure specifications loads, respectively. in bar/PSI Specifications Speed letter in bar/PSI with Q = up to 100 mph/160 km/h cold tires R = 106 mph/170 km/h S = up to 112 mph/180 km/h 205/60 R 17 2.8 / 41 2.8 / 41 T = up to 118 mph/190 km/h 93 H M+S Std H = up to 131 mph/210 km/h 225/50 R 18 V = up to 150 mph/240 km/h 95 V M+S A/S W = up to 167 mph/270 km/h Std/RSC Y = up to 186 mph/300 km/h 225/50 R 18 95 W RSC Tire Identification Number 225/50 R 18 95 H M+S RSC DOT code: DOT xxxx xxx 2118 xxxx: manufacturer code for the tire brand 225/45 R 19 3.0 / 44 3.0 / 44 92 W RSC xxx: tire size and tire design 2118: tire age Tires with DOT codes meet the guidelines Tire identification marks of the U.S. Department of Transportation. Tire age Tire size 205/45 R 17 84 V Recommendation 205: nominal width in mm Regardless of the tire tread, replace tires at 45: aspect ratio in % least every 6 years. R: radial tire code Manufacture date 17: rim diameter in inches You can find the manufacture date of the 84: load rating, not for ZR tires tire on the tire's sidewall. V: speed rating, before the R on ZR tires Designation Manufacture date Maximum tire load DOT … 2118 21st week 2018 Maximum tire load is the maximum permissible weight for which the tire is approved. Uniform Tire Quality Grading Locate the maximum tire load on the tire Quality grades can be found where applica- sidewall and the Gross Axle Weight Rating ble on the tire sidewall between tread – GAWR – on the certification label on the shoulder and maximum section width. driver’s door pillar. Divide the tire load by 1.1. It must be greater than one-half of the

260 Online Edition for Part no. 01402723835 - VI/18 Seite 261

Wheels and tires MOBILITY

E.g.: Treadwear 200; Traction AA; Tempera- Temperature ture A The temperature grades are A, the highest, B, and C, representing the tire's resistance DOT Quality Grades to the generation of heat and its ability to Treadwear dissipate heat when tested under controlled Traction AA A B C conditions on a specified indoor laboratory test wheel. Sustained high temperature can Temperature A B C cause the material of the tire to degenerate All passenger vehicle tires must conform to and reduce tire life, and excessive tempera- Federal Safety Requirements in addition to ture can lead to sudden tire failure. The these grades. grade C corresponds to a level of performance which all passenger vehicle tires must Treadwear meet under the Federal Motor Vehicle The treadwear grade is a comparative rating Safety Standard No. 109. Grades Band A based on the wear rate of the tire when represent higher levels of performance on tested under controlled conditions on a the laboratory test wheel than the minimum specified government test course. E.g., a required by law. tire graded 150 would wear one and one- half, 1 g, times as well on the government WARNING course as a tire graded 100. The relative The temperature grade for this tire is es- performance of tires depends upon the ac- tablished for a tire that is properly inflated tual conditions of their use, however, and and not overloaded. Excessive speed, un- may depart significantly from the norm due derinflation, or excessive loading, either to variations in driving habits, service prac- separately or in combination, can cause tices and differences in road characteristics heat buildup and possible tire failure. and climate.

Traction RSC – Run-flat tires The traction grades, from highest to lowest, Run-flat tires, refer to page 264, are labeled are AA, A, B, and C. with a circular symbol containing the let- Those grades represent the tire's ability to ters RSC marked on the sidewall. stop on wet pavement as measured under controlled conditions on specified govern- M+S ment test surfaces of asphalt and concrete. Winter and all-season tires with better cold A tire marked C may have poor traction per- weather performance than summer tires. formance. The traction grade assigned to this tire is based on straight-ahead braking traction Tire tread tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. Summer tires Do not drive with a tire tread of less than 0.12 in/3 mm, otherwise there is an increased risk of hydroplaning.

261 Online Edition for Part no. 01402723835 - VI/18 Seite 262

MOBILITY Wheels and tires

Winter tires – Unusual vibrations. Do not drive with a tire tread of less than – Unusual tire or running noises. 0.16 in/4 mm, as such tires are less suitable – Unusual handling such as a strong ten- for winter operation. dency to pull to the left or right. Damage can be caused by the following sit- Minimum tread depth uations, for instance: – Driving over curbs. – Road damage. – Tire inflation pressure too low. – Vehicle overloading. – Incorrect tire storage. Safety information

Wear indicators are distributed around the WARNING tire's circumference and have the legally required minimum height of 0.063 in- Damaged tires can lose tire inflation pres- ches/1.6 mm. sure, which can lead to loss of vehicle control. There is a risk of an accident. If tire The positions of the wear indicators are damage is suspected while driving, imme- marked on the tire sidewall with TWI, Tread diately reduce speed and stop. Have Wear Indicator. wheels and tires checked. For this purpose, drive carefully to the nearest dealer’s service center or another qualified service Tire damage center or repair shop. Have vehicle towed or transported as needed. Do not repair damaged tires, but have them replaced. General information Inspect your tires regularly for damage, foreign objects lodged in the tread, and tread WARNING wear. Tires can become damaged by driving over Driving over rough or damaged road surfa- obstacles, e.g., curbs or road damage, at ces, as well as debris, curbs and other obsta- high speed. Larger wheels have a smaller cles can cause serious damage to wheels, tire cross-section. The smaller the tire tires and suspension parts. This is more cross-section, the higher the risk of tire likely to occur with low-profile tires, which damage. There is a danger of accidents and provide less cushioning between the wheel property damage. If possible, drive around and the road. Be careful to avoid road haz- obstacles, or drive over them slowly and ards and reduce your speed, especially if carefully. your vehicle is equipped with low-profile tires. Indications of tire damage or other vehicle malfunctions:

262 Online Edition for Part no. 01402723835 - VI/18 Seite 263

Wheels and tires MOBILITY

Changing wheels and tires for your vehicle type. Following tire damage, have the original wheel/tire combination remounted on the vehicle as soon as Mounting and wheel balancing possible. Have mounting and wheel balancing carried out by a dealer’s service center or another qualified service center or repair shop. Recommended tire brands Wheel and tire combination

General information You can ask the dealer’s service center or another qualified service center or repair shop about the correct wheel/tire combination and wheel rim versions for the vehicle.

Safety information For each tire size, the manufacturer of the vehicle recommends certain tire brands. WARNING The tire brands can be identified by a star on the tire sidewall. Wheels and tires which are not suitable for your vehicle can damage parts of the vehicle, for instance due to contact with New tires the body due to tolerances despite the Tire traction is not optimal due to manufac- same official size rating. There is a risk of turing circumstances when tires are brand- an accident. The manufacturer of your ve- new; they achieve their full traction poten- hicle strongly suggests that you use tial after a break-in time. wheels and tires that have been recommended by the vehicle manufacturer for Drive conservatively for the first your vehicle type. 200 miles/300 km. Retreaded tires WARNING Incorrect wheel/tire combinations will WARNING have a negative impact on the vehicle's Retreaded tires can have different tire cas- handling and on the function of a variety ing structures. With advanced age the of systems, such as the Anti-lock Brake service life can be limited. There is a risk System or Dynamic Stability Control. of an accident. The manufacturer of your There is a risk of an accident. To maintain vehicle does not recommend the use of re- good handling and vehicle response, use treaded tires. only tires with a single tread configuration from a single manufacturer. The manufac- The manufacturer of your vehicle does not turer of the vehicle recommends that you recommend the use of retreaded tires. use wheels and tires that have been recommended by the vehicle manufacturer

263 Online Edition for Part no. 01402723835 - VI/18 Seite 264

MOBILITY Wheels and tires

Winter tires Storage Winter tires are recommended for operat- Store wheels and tires in a cool, dry and ing on winter roads. dark place. Although so-called all-season M+S tires pro- Always protect tires against all contact with vide better winter traction than summer oil, grease, and solvents. tires, they usually do not provide the same Do not leave tires in plastic bags. level of performance as winter tires. Remove dirt from wheels or tires. Maximum speed of winter tires If the maximum speed of the vehicle is Run-flat tires higher than the permissible speed for the winter tires, then attach a label showing the permissible maximum speed in the field of Concept view. The label is available from a dealer’s Run-flat tires permit continued driving un- service center or another qualified service der restricted conditions even in the event center or repair shop. of a complete loss of tire inflation pressure. With winter tires mounted, observe and do not exceed the permissible maximum speed. General information The wheels are composed of tires that are Changing runflat tires self-supporting to a limited degree. For your own safety, use only runflat tires. The support of the sidewall allows the tire No spare tire is available in the case of a flat to remain drivable to a restricted degree in tire. Further information is available from a the event of a tire inflation pressure loss. dealer’s service center or another qualified Follow the instructions for continued driv- service center or repair shop. ing with a flat tire. Rotating wheels between axles Safety information Different wear patterns can occur on the front and rear axles depending on individual driving conditions. The tires can be rotated WARNING in pairs between the axles to achieve even Your vehicle handles differently with a wear. Further information is available from run-flat with no or low inflation pressure; a dealer’s service center or another quali- for instance, your lane stability when fied service center or repair shop. After ro- braking is reduced, braking distances are tating, check the tire pressure and correct, longer and the self-steering properties will if needed. change. There is a risk of an accident. Drive moderately and do not exceed a Storing tires speed of 50 mph/80 km/h.

Air pressure Do not exceed the maximum tire inflation pressure indicated on the side wall of the tire.

264 Online Edition for Part no. 01402723835 - VI/18 Seite 265

Wheels and tires MOBILITY

Label General information – Follow the instructions on using the Mobility System found on the compressor and sealant container. – Use of the Mobility System may be inef- fective if the tire puncture measures approx. 1/8 inches/4 mm or more. – Contact a dealer’s service center or another qualified service center or repair shop if the tire cannot be made drivable. The tires are marked on the tire sidewall – If possible, do not remove foreign bodies with RSC Run-flat System Component. that have penetrated the tire. Only remove foreign objects if they are visibly protruding from the tire. Repairing a flat tire – Pull the speed limit sticker off the sealant container and apply it to the steering wheel. Safety measures – The use of a sealant can damage the – Park the vehicle as far away as possible TPM wheel electronics. In this case, from passing traffic and on solid ground. have the TPM wheel electronics re- – Switch on the hazard warning system. placed at the next opportunity. – Secure the vehicle against rolling away – The compressor can be used to check by setting the parking brake. the tire inflation pressure. – Turn the steering wheel until the front wheels are in the straight-ahead posi- Overview tion and engage the steering wheel lock. – Have all vehicle occupants get out of the Storage vehicle and ensure that they remain out- The Mobility System is located in a bag on side the immediate area in a safe place, the right side trim in the cargo area. such as behind a guardrail. – If necessary, set up a warning triangle Sealant container at an appropriate distance.

Mobility System

Concept With the Mobility System, minor tire damage can be sealed temporarily to enable continued travel. To accomplish this, sealant is pumped into the tires, which seals the dam- – Sealant container, arrow 1. age from the inside. – Filling hose, arrow 2.

265 Online Edition for Part no. 01402723835 - VI/18 Seite 266

MOBILITY Wheels and tires

Observe use-by date on the sealant con- Filling the tire with sealant tainer. Safety information Compressor DANGER If the exhaust pipe is blocked or ventilation is insufficient, harmful exhaust gases can enter into the vehicle. The exhaust gases contain pollutants which are color- less and odorless. In enclosed areas, exhaust gases can also accumulate outside of the vehicle. There is danger to life. Keep the exhaust pipe free and ensure sufficient ventilation. 1 Sealant container unlocking 2 Sealant container holder 3 Tire pressure gage NOTICE 4 Reduce tire inflation pressure button The compressor can overheat during ex- 5 On/off switch tended operation. There is a risk of dam- 6 Compressor age to property. Do not run the compressor for more than 10 minutes. 7 Connector/cable for socket 8 Connection hose Filling Safety measures 1. Shake the sealant container. – Park the vehicle as far away as possible from passing traffic and on solid ground. – Switch on the hazard warning system. – Secure the vehicle against rolling away by setting the parking brake. – Turn the steering wheel until the front wheels are in the straight-ahead position and engage the steering wheel lock. – Have all vehicle occupants get out of the vehicle and ensure that they remain outside the immediate area in a safe place, such as behind a guardrail. – If necessary, set up a warning triangle at an appropriate distance.

266 Online Edition for Part no. 01402723835 - VI/18 Seite 267

Wheels and tires MOBILITY

2. Pull filling hose completely out of the 5. With the compressor switched off, in- cover of the sealant container. Do not sert the plug into the power socket in- kink the hose. side the vehicle.

3. Slide the sealant container into the 6. With the ignition switched on or the en- holder on the compressor housing, engine running, switch on the compressor. suring that it engages audibly.

Let the compressor run for max. 10 minutes 4. Screw the filling hose of the sealant con- to fill the tire with sealant and achieve a tainer onto the tire valve of the non- tire inflation pressure of approx. 2.5 bar. working wheel. While the tire is being filled with sealant, the tire inflation pressure may sporadically reach approx. 5 bar. Do not switch off the compressor at this point. Checking and adjusting the tire inflation pressure

Checking 1. Switch off the compressor. 2. Read the tire inflation pressure on the tire pressure gage. To continue the trip, a tire inflation pressure of at least 2 bar must be reached.

267 Online Edition for Part no. 01402723835 - VI/18 Seite 268

MOBILITY Wheels and tires

Removing and stowing the sealant If a tire inflation pressure of at least container 2 bar cannot be reached, contact your dealer’s service center or another quali- 1. Unscrew the filling hose of the sealant fied service center or repair shop. container from the tire valve. If a tire inflation pressure of at least 2. Press the red unlocking device. 2 bar is reached, see Minimum tire infla- 3. Remove the sealant container from the tion pressure is reached. compressor. 6. Unscrew the connection hose of the 4. Wrap and store the sealant container in compressor from the tire valve. suitable material to avoid dirtying the 7. Pull the connector out of the power cargo area. socket inside the vehicle. Minimum tire inflation pressure is not 8. Stow the Mobility System in the vehicle. reached Minimum tire inflation pressure is 1. Pull the connector out of the power reached socket inside the vehicle. 1. Unscrew the connection hose of the 2. Drive 33 ft/10 m forward and back to compressor from the tire valve. distribute the sealant in the tire. 2. Pull the connector out of the power 3. Screw the connection hose of the com- socket inside the vehicle. pressor directly onto the tire valve stem. 3. Stow the Mobility System in the vehicle. 4. Immediately drive approx. 5 miles/10 km to ensure that the sealant is evenly distributed in the tire. Do not exceed a speed of 50 mph/80 km/h. If possible, do not drive at speeds less than 12 mph/20 km/h.

4. Insert the connector into the power Adjustment socket inside the vehicle. 1. Stop at a suitable location. 2. Screw the connection hose of the compressor directly onto the tire valve stem.

5. With the ignition switched on or the engine running, switch on the compressor.

268 Online Edition for Part no. 01402723835 - VI/18 Seite 269

Wheels and tires MOBILITY

3. Insert the connector into the power Snow chains socket inside the vehicle. Safety information

WARNING With the mounting of snow chains on unsuitable tires, the snow chains can come into contact with vehicle parts. There is a risk of accidents or risk of damage to property. Only mount snow chains on tires that are designated by their manufacturer as 4. Correct the tire inflation pressure to at suitable for the use of snow chains. least 2.0 bar. – Increase tire inflation pressure: with the ignition switched on or the engine running, switch on the com- WARNING pressor. Insufficiently tight snow chains may dam- – Reduce tire inflation pressure: press age tires and vehicle components. There is the button on the compressor. a risk of accidents or risk of damage to property. Make sure that the snow chains 5. Unscrew the connection hose of the are always sufficiently tight. Re-tighten as compressor from the tire valve. needed according to the snow chain manu- 6. Pull the connector out of the power facturer's instructions. socket inside the vehicle. 7. Stow the Mobility System in the vehicle. Fine-link snow chains Continuing the trip The manufacturer of your vehicle recommends use of fine-link snow chains. Certain Do not exceed the maximum permissible types of fine-link snow chains have been speed of 50 mph/80 km/h. tested by the manufacturer of the vehicle Reinitialize the Flat Tire Monitor, refer to and recommended as road-safe and suitable. page 172. Information regarding suitable snow chains Reset the Tire Pressure Monitor, refer to is available from a dealer’s service center or page 167. another qualified service center or repair Replace the nonworking tire and the sealant shop. container of the Mobility System promptly. Use Use only in pairs on the front wheels, equipped with the tires of the following size: – 205/65 R 16. – 205/60 R 17. John Cooper Works: 205/60 R 17

269 Online Edition for Part no. 01402723835 - VI/18 Seite 270

MOBILITY Wheels and tires

Follow the snow chain manufacturer's instructions. DANGER Do not initialize the run-flat tires after Supports such as wooden blocks under the mounting snow chains, as doing so may re- vehicle jack reduce the capacity of the ve- sult in incorrect readings. hicle jack to bear weight. They have the Do not reset the Tire Pressure Monitor TPM potential to exert too much strain on the after mounting snow chains, as doing so vehicle jack, causing it to tip over and the may result in incorrect readings. vehicle to fall. There is a risk of injuries or danger to life. Do not place supports under When driving with snow chains, briefly ac- the vehicle jack. tivate Dynamic Traction Control DTC, if needed. Maximum speed with snow chains WARNING Do not exceed a speed of 30 mph/50 km/h The jack, issued by the vehicle manufac- when using snow chains. turer, is provided in order to perform a wheel change in the event of a breakdown. The jack is not designed for frequent use; for example, changing from summer to Changing wheels/tires winter tires. Using the jack frequently may cause it to become jammed or damaged. General information There is a risk of injury and risk of damage When using run-flat tires or a flat tire kit, a to property. Only use the jack to attach an wheel does not always need to be changed emergency or spare wheel in the event of immediately when there is a loss of tire in- a breakdown. flation pressure due to a flat tire. If needed, the tools for changing wheels are available as accessories from a dealer’s WARNING service center or another qualified service On soft, uneven or slippery ground, for ex- center or repair shop. ample snow, ice, tiles, etc., the vehicle jack can slip away. There is a risk of injury. If Safety information possible, change the wheel on a flat, solid, and slip-resistant surface. DANGER The vehicle jack is only provided for short- WARNING term lifting of the vehicle for wheel changes. Even if all safety measures are The vehicle jack is optimized for lifting observed, there is a risk of the raised vehi- the vehicle and for the jacking points on cle falling, if the vehicle jack tips over. the vehicle only. There is a risk of injury. There is a risk of injuries or danger to life. Do not lift any other vehicle or cargo using If the vehicle is raised, do not lie under the the vehicle jack. vehicle and do not start the engine.

270 Online Edition for Part no. 01402723835 - VI/18 Seite 271

Wheels and tires MOBILITY

On a level surface WARNING If the vehicle jack is not inserted into the jacking point provided for this purpose, the vehicle may be damaged or the vehicle jack may slip when it is being cranked up. There is a risk of injury or risk of damage to property. When cranking up the vehicle jack, ensure that it is inserted in the jacking point next to the wheel housing. Place wheel chocks or other suitable objects in front and behind the wheel that is diago- WARNING nal to the wheel to be changed. A vehicle that is raised on a vehicle jack may fall off of the jack if lateral forces are exerted on it. There is a risk of injury and On a slight downhill gradient risk of damage to property. While the vehicle is raised, do not exert lateral forces on the vehicle or pull abruptly on the vehicle. Have a stuck wheel removed by a dealer’s service center or another qualified service center or repair shop.

Securing the vehicle against rolling

General information If you need to change a wheel on a slight downhill grade, place chocks and other suit- The vehicle manufacturer recommends to able objects, for instance a rock, under the additionally secure the vehicle against roll- wheels of both the front and rear axles ing away when changing a wheel. against the rolling direction.

Lug bolt lock

Concept The wheel lug bolts have a special coding. The lug bolts can only be released with the adapter which matches the coding.

Overview The adapter of the lug bolt lock is located in the onboard vehicle tool kit, refer to page 287.

271 Online Edition for Part no. 01402723835 - VI/18 Seite 272

MOBILITY Wheels and tires

– Depending on the vehicle equipment, get wheel change tools and, if necessary, the emergency wheel from the vehicle. – If necessary, set up a warning triangle or portable hazard warning light at an appropriate distance. – Secure the vehicle additionally against rolling. – Loosen the lug bolts a half turn. – Lug bolt, arrow 1. – Adapter, arrow 2. Jacking points for the vehicle jack

Unscrewing 1. Attach the adapter to the lug bolt. 2. Unscrew the lug bolt. 3. Remove the adapter after unscrewing the lug bolt.

Screwing on 1. Attach the adapter to the lug bolt. If The jacking points for the vehicle jack are necessary, turn the adapter until it fits located at the marked positions. on the lug bolt. 2. Screw on the lug bolt. The tightening torque is 140 Nm. 3. Remove the adapter and stow it after screwing on the lug bolt. Preparing the vehicle – Park the vehicle on solid and non-slip ground at a safe distance from traffic. – Switch on the hazard warning system. – Set the parking brake. – Engage a gear or move the selector lever to position P. – As soon as permitted by the traffic flow, have all vehicle occupants get out of the vehicle and ensure that they remain outside the immediate area in a safe place, such as behind a guardrail.

272 Online Edition for Part no. 01402723835 - VI/18 Seite 273

Wheels and tires MOBILITY

Jacking up the vehicle 3. Extend the vehicle jack by turning the vehicle jack crank or lever clockwise. WARNING Hands and fingers can be jammed when using the vehicle jack. There is a risk of injury. Comply with the described hand position and do not change this position while using the vehicle jack.

1. Hold the vehicle jack with one hand, arrow 1, and grasp the vehicle jack crank or lever with your other hand, arrow 2. 4. Take your hand away from the vehicle jack as soon as the vehicle jack is under load and continue turning the vehicle jack crank or lever with one hand. 5. Make sure that the vehicle jack foot stands vertically and at a right angle beneath the jacking point.

2. Insert the vehicle jack into the rectan- gular recess of the jacking point closest to the wheel to be changed.

6. Make sure that the vehicle jack foot stands vertically and perpendicularly beneath the jacking point after extending the vehicle jack.

7. Crank up the vehicle jack until the entire surface of the jack is in contact with the ground and the wheel in question is

273 Online Edition for Part no. 01402723835 - VI/18 Seite 274

MOBILITY Wheels and tires

raised a maximum of 1.2 inches/3 cm off other qualified service center or repair the ground. shop. Mounting a wheel Mount one emergency wheel only, as re- Emergency wheel quired. 1. Unscrew the lug bolts. Concept 2. Remove the wheel. In the event of a flat tire, the emergency wheel can be used in place of the wheel 3. Put the new wheel or emergency wheel with the defective tire. The emergency on and screw in at least two lug bolts in wheel is only intended for temporary use a crosswise pattern until hand-tight. until the defective tire/wheel has been re- If non-original light-alloy wheels of the placed. vehicle manufacturer are mounted, the accompanying lug bolts may have to be General information used as well. Mount one emergency wheel only. 4. Hand-tighten the remaining lug bolts Also check the tire inflation pressure of the and tighten all lug bolts well in a cross- emergency wheel in the cargo area regu- wise pattern. larly, and correct it as needed. 5. Turn the vehicle jack crank counterclockwise to retract the vehicle jack and Safety information lower the vehicle. 6. Remove the vehicle jack and stow it se- WARNING curely. The emergency wheel has particular di- After the wheel change mensions. When driving with an emergency wheel, changed driving properties 1. Tighten the lug bolts crosswise. The may occur, for instance reduced lane sta- tightening torque is 101 lb ft/140 Nm. bility when braking, longer braking dis- 2. Stow the nonworking wheel in the cargo tance, and changed self-steering proper- area, if necessary. ties in the limit area. There is a risk of an The nonworking wheel cannot be stored accident. Drive moderately and do not ex- under the cargo floor panel because of ceed a speed of 50 mph/80 km/h. its size. 3. Check tire inflation pressure at the next opportunity and correct as needed. 4. Reinitialize the run-flat tires. Reset the Tire Pressure Monitor TPM. 5. Check to make sure the lug bolts are tight with a calibrated torque wrench. 6. Have the damaged tire replaced at the nearest dealer’s service center or an-

274 Online Edition for Part no. 01402723835 - VI/18 Seite 275

Wheels and tires MOBILITY

Overview

The emergency wheel and the wheel change tools are located in the cargo area under the cargo floor panel.

Removing the emergency wheel 1. Pull up and remove the cargo floor panel. 2. Unscrew the butterfly screw. 3. Remove the retaining plate or the cover. 4. Where applicable, remove the holder and the trailer hitch. 5. Remove the jacking point and the tool holder on the left next to the emergency wheel. 6. Slide the emergency wheel to the left and remove it. Inserting the emergency wheel 1. Insert the emergency wheel on the left and slide it to the right. 2. Where applicable, mount the holder and the trailer hitch. 3. Attach the retaining plate or the cover. 4. Screw on and tighten the butterfly screw. 5. Insert and secure the jacking point and the tool holder on the left next to the emergency wheel. 6. Insert the cargo floor panel.

275 Online Edition for Part no. 01402723835 - VI/18 Seite 276

MOBILITY Engine compartment

Engine compartment

Overview

1 Filler neck for washer fluid 4 Jump-starting, positive terminal 2 Vehicle identification number 5 Jump-starting, negative terminal 3 Oil filler neck 6 Coolant reservoir

276 Online Edition for Part no. 01402723835 - VI/18 Seite 277

Engine compartment MOBILITY

Hood WARNING Safety information Body parts can be jammed when opening and closing the hood. There is a risk of injury. Make sure that the area of movement WARNING of the hood is clear during opening and Improperly executed work in the engine closing. compartment can damage vehicle components and impair vehicle functions. There is a risk of personal and property damage. NOTICE The manufacturer of your vehicle recom- Folded-away wipers can be jammed when mends that, in the effort to avoid such the hood is opened. There is a risk of dam- risks, work in the engine compartment be age to property. Make sure that the wipers performed by a dealer’s service center or with the wiper blades mounted are folded another qualified service center or repair down onto the windshield before opening shop. the hood.

WARNING NOTICE The engine compartment accommodates When the hood is closed, it must engage moving components. Certain components on both sides. Pressing again can damage in the engine compartment can also move the hood. There is a risk of damage to with the vehicle switched off, for instance property. Open the hood again and then the radiator fan. There is a risk of injury. close it energetically. Avoid pressing Do not reach into the area of moving parts. again. Keep articles of clothing and hair away from moving parts. Opening the hood 1. Pull lever, arrow 1. WARNING Hood is unlocked. There are protruding parts, for instance locking hook, on the inside of the hood. There is a risk of injury. If the hood is open, pay attention to protruding parts and keep clear of these areas.

WARNING An incorrectly locked hood can open while driving and restrict visibility. There is a risk of an accident. Stop immediately and 2. After the lever is released, pull the lever correctly close the hood. again, arrow 2. Hood can be opened.

277 Online Edition for Part no. 01402723835 - VI/18 Seite 278

MOBILITY Engine compartment

Indicator/warning lights When the hood is opened, a Check Control message is displayed. Closing the hood

Let the hood fall from approx. 16 inches/40 cm, arrow. The hood must engage on both sides.

278 Online Edition for Part no. 01402723835 - VI/18 Seite 279

Engine oil MOBILITY

Engine oil

Vehicle features and options NOTICE This chapter describes all standard, country- Too much engine oil can damage the en- specific and optional features offered with gine or the catalytic converter. There is a the series. It also describes features that are risk of damage to property. Do not add too not necessarily available in your vehicle, much engine oil. When too much engine e. g., due to the selected options or country oil is added, have the engine oil level cor- versions. This also applies to safety-related rected by a dealer’s service center or an- functions and systems. When using these other qualified service center or repair functions and systems, the applicable laws shop. and regulations must be observed.

General information Electronic oil measurement

The engine oil consumption is dependent on General information your driving style and driving conditions. The electronic oil measurement has two Therefore, regularly check the engine oil measuring principles: level after refueling by taking a detailed – Monitoring. measurement. – Detailed measurement. The engine oil consumption can increase in When making frequent short-distance trips the following situations, for example: or using a dynamic driving style, for in- – Sporty driving style. stance when taking curves aggressively, – Break-in of the engine. regularly perform a detailed measurement. – Idling of the engine. Monitoring – With use of engine oil types that are classified as not suitable. Concept Different Check Control messages appear, The engine oil level is monitored electroni- depending on the engine oil level. cally while driving and can be shown on the Control Display. If the engine oil level is outside its permis- Safety information sible operating range, a Check Control message is displayed. A red indicator light indicates that NOTICE the engine oil pressure is too low. An engine oil level that is too low causes engine damage. There is a risk of damage to property. Immediately add engine oil.

279 Online Edition for Part no. 01402723835 - VI/18 Seite 280

MOBILITY Engine oil

Functional requirements – Engine is running and is at operating A current measured value is available after temperature. approx. 30 minutes of normal driving. Performing a detailed measurement Displaying the engine oil level Via the Central Information Display (CID): Via the Central Information Display (CID): 1. "My MINI" 1. "My MINI" 2. "Vehicle status" 2. "Vehicle status" 3. "Engine oil level" 3. "Engine oil level" 4. "Measure engine oil level" The engine oil level is displayed. 5. "Start measurement" The engine oil level is checked and dis- System limits played via a scale. When making frequent short-distance trips or using a dynamic driving style, it may not be possible to calculate a measured value. Adding engine oil In this case, the measured value for the last, sufficiently long trip is displayed. General information Detailed measurement Only add engine oil when the message is displayed in the instrument cluster. The Concept quantity to be added is indicated in the message displayed in the instrument clus- The engine oil level is checked when the ve- ter. hicle is stationary and displayed via a scale. Only add suitable types of engine oil, refer If the engine oil level is outside its permis- to page 281. sible operating range, a Check Control message is displayed. Safely park the vehicle and switch off the ignition before adding engine oil. General information Take care not to add too much engine oil. During the measurement, the idle speed is increased somewhat. Safety information

Functional requirements WARNING – Vehicle is parked in a horizontal posi- Operating materials, for instance oils, tion. greases, coolants, fuels, can contain harm- – Manual transmission: shift lever in neu- ful ingredients. There is a risk of injuries tral position, clutch and accelerator ped- or danger to life. Follow the instructions als not depressed. on the containers. Avoid the contact of ar- – Steptronic transmission: selector lever ticles of clothing, skin or eyes with operat- in selector lever position N or P and ac- ing materials. Do not refill operating mate- celerator pedal not depressed. rials into different bottles. Store operating materials out of reach of children.

280 Online Edition for Part no. 01402723835 - VI/18 Seite 281

Engine oil MOBILITY

Engine oil types to add NOTICE An engine oil level that is too low causes General information engine damage. There is a risk of damage to property. Immediately add engine oil. The engine oil quality is critical for the life of the engine. Only add the types of engine oil which are NOTICE listed. Too much engine oil can damage the engine or the catalytic converter. There is a Safety information risk of damage to property. Do not add too much engine oil. When too much engine NOTICE oil is added, have the engine oil level cor- Oil additives can damage the engine. rected by a dealer’s service center or an- There is a risk of damage to property. Do other qualified service center or repair not use oil additives. shop.

Overview NOTICE The oil filler neck is located in the engine Incorrect engine oil can cause malfunc- compartment, refer to page 276. tions in the engine or damage it. There is a risk of damage to property. When select- Adding engine oil ing an engine oil, make sure that the engine oil has the correct oil rating. 1. Open the hood, refer to page 277. 2. Open the lid counterclockwise. Suitable engine oil types Add engine oils that meet the following oil rating standards: Gasoline engine BMW Longlife-01 FE. BMW Longlife-14 FE+.

Alternative engine oil types 3. Add engine oil. If an engine oil suitable for continuous use 4. Close the cap. is not available, up to 1 US quart/liter of an engine oil with the following oil rating can be added:

281 Online Edition for Part no. 01402723835 - VI/18 Seite 282

MOBILITY Engine oil

Oil rating API SL. API SM. API SN.

Viscosity grades When selecting an engine oil, make sure that the engine oil belongs to one of the following viscosity grades: Viscosity grades SAE 0W-20. SAE 0W-30.

More information about suitable engine oil ratings and viscosities of engine oils can be requested from a dealer’s service center or another qualified service center or repair shop.

Engine oil change

NOTICE Engine oil that is not changed in timely fashion can cause increased engine wear and thus engine damage. There is a risk of damage to property. Do not exceed the service data indicated in the vehicle.

The vehicle manufacturer recommends that you have a dealer’s service center or another qualified service center or repair shop change the engine oil.

282 Online Edition for Part no. 01402723835 - VI/18 Seite 283

Coolant MOBILITY

Coolant

Vehicle features and options contact with skin, eyes or articles of clothing. Use suitable additives only. This chapter describes all standard, country- specific and optional features offered with the series. It also describes features that are Coolant level not necessarily available in your vehicle, e. g., due to the selected options or country versions. This also applies to safety-related Checking functions and systems. When using these There are yellow Min and Max marks in the functions and systems, the applicable laws coolant reservoir. and regulations must be observed. 1. Let the engine cool. 2. Open the hood. General information 3. Turn the lid of the coolant reservoir slightly counterclockwise to allow any Coolant consists of water and additives. excess pressure to dissipate, then open Not all commercially available additives are it. suitable for the vehicle. Information about suitable additives is available from a dealer’s service center or another qualified service center or repair shop.

Safety information

WARNING 4. Open the coolant reservoir lid. With the engine hot and the cooling sys- 5. The coolant level is correct if it lies be- tem open, coolant can escape and lead to tween the minimum and maximum scalding. There is a risk of injury. Only marks in the filler neck. open the cooling system with the engine cooled down.

WARNING Additives are harmful and incorrect additives can damage the engine. There is a risk of injury and risk of damage to property. Do not allow additives to come into

283 Online Edition for Part no. 01402723835 - VI/18 Seite 284

MOBILITY Coolant

Adding 1. Let the engine cool. 2. Open the hood. 3. Turn the lid of the coolant reservoir slightly counterclockwise to allow any excess pressure to dissipate, then open it.

4. If the coolant is low, slowly add coolant up to the specified level; do not overfill. 5. Close the cap. 6. Have the cause of the coolant loss eliminated as soon as possible.

Disposal

Comply with the relevant environmental protection regulations when disposing of coolant and coolant additives.

284 Online Edition for Part no. 01402723835 - VI/18 Seite 285

Maintenance MOBILITY

Maintenance

Vehicle features and options General information Information on service requirements, refer This chapter describes all standard, country- to page 144, can be displayed on the Control specific and optional features offered with Display. the series. It also describes features that are not necessarily available in your vehicle, Service data in the remote control e. g., due to the selected options or country Information on the required maintenance is versions. This also applies to safety-related continuously stored in the remote control. functions and systems. When using these The dealer’s service center can read this functions and systems, the applicable laws data out and suggest an optimized mainte- and regulations must be observed. nance scope for the vehicle. Therefore, hand the service advisor the remote control with which the vehicle was MINI maintenance system driven most recently. The maintenance system indicates required Storage periods maintenance measures, and thereby pro- Storage periods during which the vehicle vides support in maintaining road safety battery was disconnected are not taken into and the operational reliability of the vehicle. account. In some cases, scopes and intervals of the If this occurs, have a dealer's service center maintenance system may vary according to or another qualified service center or repair the country version. Replacement work, shop update the time-dependent mainte- spare parts, fuels and lubricants, and wear nance procedures, such as checking brake materials are calculated separately. Further fluid and, if necessary, changing the engine information is available from a dealer’s serv- oil and the microfilter/activated-charcoal ice center or another qualified service cen- filter. ter or repair shop.

Condition Based Service CBS Service and Warranty Infor- mation Booklet for US models Concept and Warranty and Service Sensors and special algorithms take into ac- Guide Booklet for Canadian count the driving conditions of the vehicle. models CBS uses these to calculate the need for maintenance. Please consult your Service and Warranty The system makes it possible to adapt the Information Booklet for US models and amount of maintenance corresponding to Warranty and Service Guide Booklet for your user profile. Canadian models for additional information on service requirements.

285 Online Edition for Part no. 01402723835 - VI/18 Seite 286

MOBILITY Maintenance

The manufacturer of your vehicle recom- Position mends that maintenance and repair be performed by a dealer’s service center or another qualified service center or repair shop. Records of regular maintenance and repair work should be retained.

Socket for OBD Onboard Diag- nosis There is an OBD socket on the driver's side General information for checking the primary components in the Devices connected to the OBD socket trig- vehicle's emissions. ger the alarm system when the vehicle is locked. Remove any devices connected at Emissions the OBD socket before locking the vehicle. – The warning light lights up: Safety information Emissions are deteriorating. Have the vehicle checked as soon as possible. NOTICE – The warning light flashes under certain The socket for Onboard Diagnosis is an in- circumstances: tricate component intended to be used in conjunction with specialized equipment to This indicates that there is excessive check the vehicle’s primary emissions sys- misfiring in the engine. tem. Improper use of the socket for On- Reduce the vehicle speed and have the board Diagnosis, or contact with the system checked immediately; otherwise, socket for Onboard Diagnosis for other serious engine misfiring within a brief than its intended purpose, can cause vehi- period can seriously damage emission cle malfunctions and creates risks of per- control components, in particular the sonal and property damage. Given the fore- catalytic converter. going, the manufacture of your vehicle strongly recommends that access to the socket for Onboard Diagnosis be limited to a dealer's service center or another qualified service center or repair shop or other persons that have the specialized training and equipment for purposes of properly utilizing the socket for Onboard Diagnosis.

286 Online Edition for Part no. 01402723835 - VI/18 Seite 287

Replacing components MOBILITY

Replacing components

Vehicle features and options changing the wiper blade. Do not fold or switch on the wiper without a wiper blade installed. This chapter describes all standard, country- specific and optional features offered with the series. It also describes features that are not necessarily available in your vehicle, NOTICE e. g., due to the selected options or country Folded-away wipers can be jammed when versions. This also applies to safety-related the hood is opened. There is a risk of dam- functions and systems. When using these age to property. Make sure that the wipers functions and systems, the applicable laws with the wiper blades mounted are folded and regulations must be observed. down onto the windshield before opening the hood. Onboard vehicle tool kit Replacing the front wiper blades 1. To change the wiper blades, fold up the wiper arms. 2. Fold up and hold the wiper arm firmly. 3. Press the button, arrow 1, and swing out the wiper blade, arrow 2.

The bag containing the onboard vehicle tool kit is located beneath the cargo floor panel. After use, secure the bag with the onboard vehicle tool kit on a lashing eye again.

4. Attach a new wiper blade. The wiper Wiper blades blade must engage audibly. 5. Fold down the wiper arm. Safety information

NOTICE The window may sustain damage if the wiper falls onto it without the wiper blade installed. There is a risk of damage to property. Hold the wiper firmly when

287 Online Edition for Part no. 01402723835 - VI/18 Seite 288

MOBILITY Replacing components

Rear wiper blade cially designated as Class 1 light-emitting diodes. 1. Fold up and hold the wiper arm firmly. Follow the safety information, refer to 2. Pull the wiper blade out of the wiper page 288. arm. Safety information

Lights and bulbs

WARNING Bulbs can get hot during operation. Con- tact with the bulbs can cause burns. There is a risk of injury. Only change bulbs after they have cooled off. 3. Attach a new wiper blade. The wiper blade must engage audibly. 4. Fold down the wiper arm. WARNING Work on switched-on lighting systems can cause short circuits. There is a risk of in- Light and bulb replacement jury or risk of damage to property. When working on the lighting system, switch off General information the lights in question. If necessary, heed the bulb manufacturer's instructions. Lights and bulbs Lights and bulbs make an essential contribution to vehicle safety. NOTICE The manufacturer of the vehicle recom- Dirty bulbs have a reduced service life. mends that you have appropriate work per- There is a risk of damage to property. Do formed by a dealer’s service center or an- not hold new bulbs with your bare hands. other qualified service center or repair shop Use a clean cloth or something similar, or if you are unfamiliar with it or if it has not hold the bulb by its base. been described here. A spare light box is available from a dealer’s service center or another qualified service Light-emitting diodes (LEDs) center or repair shop. Follow the safety information, refer to WARNING page 288. Intensive brightness can irritate or damage the retina of the eye. There is a risk of Light-emitting diodes (LEDs) injury. Do not look directly into the head- Some items of equipment use light-emitting lights or other light sources. Do not re- diodes installed behind a cover as a light move the LED covers. source. These light-emitting diodes are related to conventional lasers and are offi-

288 Online Edition for Part no. 01402723835 - VI/18 Seite 289

Replacing components MOBILITY

Headlight glass Bug light Condensation can form on the inside of the headlight glass in cool or humid weather. When driving with the lights switched on, the condensation evaporates after a short time. The headlight glass does not need to be changed. If despite driving with the headlights switched on, increasing humidity forms, for instance water droplets in the light, have the headlights checked. 1 Parking lights 2 Daytime running lights Headlight setting 3 Fog lights The headlight adjustments can be affected by changing lights and bulbs. After the headlight adjustment was changed, have it High beams checked and, if necessary, corrected by a Follow the general instructions on lights dealer’s service center or another qualified and bulbs, refer to page 288. service center or repair shop. Bulbs: H7 Front halogen lights, bulb 1. Open the hood, refer to page 277. replacement 2. Turn the lid counterclockwise and remove. Overview

Halogen headlights

1 High beams 2 Low beams 3 Turn signal

289 Online Edition for Part no. 01402723835 - VI/18 Seite 290

MOBILITY Replacing components

3. Tilt the bulb holder up, arrow 1, and pull – On the right facing the driving direc- it out of the headlight toward the rear, tion: turn the cover counterclock- arrow 2. wise and remove it.

4. Pull the bulb out of the bulb holder. 3. Unscrew the inner cover counterclock- 5. Install the new bulb with the bulb wise, and remove it. holder in reverse order of removal. In doing so, ensure that the bulb tab is correctly positioned in the headlight housing and the bulb holder perceptibly engages. 6. Check the position of the bulb through the headlight glass. 7. Close the headlight housing with the lid. Make sure that the lid engages. 4. Tilt the bulb holder down, arrow 1, and Low beams pull it downward out of the headlight, Follow the general instructions on lights arrow 2. and bulbs, refer to page 288. Bulbs: H7 1. Turn the steering wheel. 2. – On the left facing the driving direction: turn the cover clockwise and remove it.

5. Pull the bulb out of the bulb holder. 6. Install the new bulb with the bulb holder in reverse order of removal. In doing so, ensure that the bulb tab is correctly positioned in the headlight housing and the bulb holder perceptibly engages.

290 Online Edition for Part no. 01402723835 - VI/18 Seite 291

Replacing components MOBILITY

7. Check the position of the bulb through 4. Turn the bulb holder counterclockwise, the headlight glass. arrow 1, and remove, arrow 2. 8. Install the covers. Make sure that the covers engage.

Turn signal Follow the general instructions on lights and bulbs, refer to page 288. Bulbs: PWY24W 1. Turn the steering wheel. 2. – On the left facing the driving direc- 5. Press the bulb gently into the bulb tion: turn the cover clockwise and holder, turn counterclockwise and re- remove it. move. – On the right facing the driving direc- 6. Insert the new bulb and install the cov- tion: turn the cover counterclock- ers in the reverse order. Make sure that wise and remove it. the covers engage.

Parking lights/fog lights/daytime running lights Follow the general instructions on lights and bulbs, refer to page 288. Bulbs: – Parking lights: W5W – Daytime running light: PSX24W. 3. Unscrew the inner cover counterclock- – Fog light: H8. wise, and remove it.

291 Online Edition for Part no. 01402723835 - VI/18 Seite 292

MOBILITY Replacing components

Replacing the bulbs – Fog lights: turn the bulb, arrow 3, 1. Pull the cover forward out of the counterclockwise and remove it. bumper.

4. – Parking lights: pull the bulb out of 2. Remove the screws and take out the the fixture. front light. – Fog lights and daytime running lights: disconnect the bulb from the cable. 5. Insert the new bulb and install the cover in the reverse order. The daytime running lights bulb holder engages audibly, first below, then above. LED front lights, bulb replacement

3. Remove the bulb holder. General information – Parking lights: turn the bulb holder, The following lights feature LED technol- arrow 1, counterclockwise and re- ogy: move. – Daytime running lights – Daytime running lights: squeeze the – High beams upper and lower locks of the bulb, ar- – Low beams row 2, and remove the bulb. – Cornering light For better accessibility, remove the bulb of the fog light as needed. – Parking lights – Fog lights In the case of a malfunction, contact a dealer’s service center or another qualified service center or repair shop.

292 Online Edition for Part no. 01402723835 - VI/18 Seite 293

Replacing components MOBILITY

Overview Bulbs: PWY24W. 1. Open the hood, refer to page 277. Position of the headlights 2. Turn the lid counterclockwise and remove.

1 Turn signal 2 Daytime running lights 3. Turn the bulb holder counterclockwise, 3 Low beams/high beams arrow 1, and remove, arrow 2. 4 Cornering light

LED bug light

4. Press the bulb gently into the bulb holder, turn counterclockwise and remove. 1 Parking lights 5. Insert the new bulb and install the cover 2 Fog lights in the reverse order.

Turn signal Follow the general instructions on lights and bulbs, refer to page 288.

293 Online Edition for Part no. 01402723835 - VI/18 Seite 294

MOBILITY Replacing components

Tail lights, bulb replacement Side LED tail lights

Overview

1 Brake light 2 Tail lights 1 Side tail lights 3 Turn signal 2 Center brake light 4 Reversing lights 3 License plate light Side tail lights Side tail lights Follow the general instructions on lights and bulbs, refer to page 288. – Bulb, brake lights/rear lights, tail lights: P21W – Bulb, brake lights/LED tail lights: H21W – Bulb, turn signal: P21W – Bulb, reversing lights: P21W 1. Open the tailgate. 2. Remove left or right cover. 1 Brake lights/tail lights 2 Turn signal 3 Reversing lights

3. Through the opening, loosen the plug connector, arrow 2 on the bulb holder.

294 Online Edition for Part no. 01402723835 - VI/18 Seite 295

Replacing components MOBILITY

Press the latches together, arrows 1, and Side turn signal, bulb replacement remove the bulb holder. Follow the general instructions on lights and bulbs, refer to page 288. Bulb: WY5W 1. Push the side turn signal forward in the driving direction, arrow 1, and swing it outward, arrow 2.

4. Remove the bulb holder from the opening. 5. Press the nonworking bulb gently into the socket, turn counterclockwise and remove. – Arrow 1: brake lights/tail lights 2. – On the left facing the driving direc- – Arrow 2: turn signal tion: turn the bulb holder clockwise – Arrow 3: reversing light and remove. – On the right facing the driving direction: turn the bulb holder counterclockwise and remove. 3. Replace the bulb. 4. Insert the bulb holder. 5. Insert the rear side turn signal, arrow 1, and swing it forward, arrow 2.

6. Proceed in the reverse order to insert the new bulb and attach the bulb holder. Make sure that the bulb holder engages in all fasteners.

Central brake light and license plate lights Follow the general instructions on lights and bulbs, refer to page 288. The lights feature LED technology. In the case of a malfunction, contact a dealer’s Vehicle battery service center or another qualified service center or repair shop. Maintenance The battery is maintenance-free.

295 Online Edition for Part no. 01402723835 - VI/18 Seite 296

MOBILITY Replacing components

The added amount of acid is sufficient for The battery may need to be charged in the the service life of the battery. following cases: More information about the battery can be – When making frequent short-distance requested from a dealer’s service center or drives. another qualified service center or repair – If the vehicle is not used for more than a shop. month. – Steptronic transmission: when parked Replacing the vehicle battery for long periods of time in selector lever position D, R or N. General information The manufacturer of your vehicle recom- Safety information mends that you have a dealer’s service center or another qualified service center or repair shop register the vehicle battery to the NOTICE vehicle after the battery has been replaced. Battery chargers for the vehicle battery Once the battery has been registered again, can work with high voltages and currents, all comfort features will be available with- which means that the 12 volt on-board out restriction and any Check Control mes- network can be overloaded or damaged. sages displayed which relate to comfort fea- There is a risk of damage to property. Only tures will disappear. connect battery chargers for the vehicle battery to the starting aid terminals in the Safety information engine compartment.

NOTICE Starting aid terminals Vehicle batteries that are not compatible In the vehicle, only charge the battery via can damage vehicle systems and impair the starting aid terminals, refer to vehicle functions. There is a risk of per- page 301, in the engine compartment with sonal and property damage. Only vehicle the engine off. batteries that are compatible with your vehicle type should be installed in your vehi- Power failure cle. Information on compatible vehicle batteries is available at your dealer’s service After a power loss, some equipment needs center. to be newly initialized or individual settings updated, for example: – Time: update. Charging the battery – Date: update. – Seat and mirror memory: store the posi- General information tions again. Make sure that the battery is always suffi- – Glass sunroof: initialize the system. ciently charged to guarantee that the battery remains usable for its full service life. A discharged battery is indicated by a red indicator light.

296 Online Edition for Part no. 01402723835 - VI/18 Seite 297

Replacing components MOBILITY

Disposing of old batteries Replacing fuses Have old batteries disposed of by a The vehicle manufacturer recommends that dealer’s service center or another you have a dealer's service center or an- qualified service center or repair other qualified service center or repair shop shop or take them to a collection point. replace the fuses. Maintain the battery in an upright position for transport and storage. Secure the battery so that it does not tip over during transport.

Fuses

Safety information

WARNING Incorrect and repaired fuses can overload electrical lines and components. There is a risk of fire. Never attempt to repair a blown fuse. Do not replace a nonworking fuse with a substitute of another color or amperage rating.

Accessing the fuses The fuses are located in the glove compartment. 1. Open the glove compartment. 2. Swing the cover down, arrow.

Information on the fuse types and locations, as well as the positions of any other fuse boxes, is found on a separate sheet in the fuse box.

297 Online Edition for Part no. 01402723835 - VI/18 Seite 298

MOBILITY Breakdown assistance

Breakdown assistance

Vehicle features and options Warning triangle

This chapter describes all standard, country- specific and optional features offered with the series. It also describes features that are not necessarily available in your vehicle, e. g., due to the selected options or country versions. This also applies to safety-related functions and systems. When using these functions and systems, the applicable laws and regulations must be observed. The warning triangle is located in the tailgate. To remove, loosen the brackets. Hazard warning flashers

First-aid kit

General information Some of the articles have a limited service life. Check the expiration dates of the contents regularly and replace any expired items promptly. The button is located above the Control Dis- play. Storage The red light in the button flashes when the The first-aid kit is located in the cargo area. hazard warning flashers are activated. MINI Roadside Assistance

Concept MINI Roadside Assistance can be contacted if assistance is needed in the event of a breakdown.

298 Online Edition for Part no. 01402723835 - VI/18 Seite 299

Breakdown assistance MOBILITY

General information If this is not possible, further measures will In the event of a breakdown, data on the ve- be initiated, for instance Roadside Assis- hicle's condition is sent directly to the man- tance will be informed. ufacturer of your vehicle. Contact can also be made via a Check Con- trol message, refer to page 138. Intelligent emergency call Starting Roadside Assistance Concept If the vehicle is equipped with Teleservices, In case of an emergency, an Emergency Re- support is offered through Teleservice Diag- quest can be made through the system. nosis. Via the Central Information Display (CID): General information Only press the SOS button in an emergency. 1. "MINI Connected" For technical reasons, the Emergency Re- 2. "MINI Assist" quest cannot be guaranteed under unfavora- 3. "MINI Roadside Assistance" ble conditions. The contact to the Roadside Assistance of the manufacture is established. Overview A telephone number is displayed, if needed. Select to dial the telephone number on a connected mobile phone.

Teleservice Diagnosis Teleservice Diagnosis enables the wireless transmission of detailed vehicle data that is important for vehicle diagnosis. This data is transmitted automatically. SOS button in the roofliner Starting Teleservice Help Depending on the country, the Teleservice Functional requirements Help enables a more in-depth diagnosis of the vehicle via wireless transmission. – The ignition is switched on. You can launch Teleservice Help by re- – The Assist system is functional. questing it through the Service Specialist. – The SIM card integrated in the vehicle has been activated. 1. Park the vehicle in a safe place. 2. Set the parking brake. Initiating an Emergency Request 3. Control Display is switched on. automatically 4. "Teleservice Help" Under certain conditions, for instance if the The driving ability of the vehicle can be re- airbags trigger, an Emergency Request is stored for specific functions. automatically initiated immediately after an accident of corresponding severity. Auto-

299 Online Edition for Part no. 01402723835 - VI/18 Seite 300

MOBILITY Breakdown assistance

matic Collision Notification is not affected cle and two jumper cables. Only use jumper by pressing the SOS button. cables with fully insulated clamp handles. Initiating an Emergency Request Safety information manually 1. Press the cover briefly to open it. DANGER 2. Press the SOS button until the LED at Contact with live components can lead to the button lights up green. an electric shock. There is a risk of inju- – The LED is illuminated green when an ries or danger to life. Do not touch any Emergency Request has been initiated. components that are under voltage. If the situation allows, wait in your vehicle until the voice connection has been established. WARNING – The LED flashes green when a connec- If the jumper cables are connected in the tion to the MINI Response Center has incorrect order, sparking may occur. There been established. is a risk of injury. Pay attention to the correct order during connection. The MINI Response Center then makes contact with you and takes further steps to help you. NOTICE Even if you are unable to respond, the MINI Response Center can take further In the case of body contact between the steps to help you under certain circum- two vehicles, a short circuit can occur dur- stances. ing jump-starting. There is a risk of damage to property. Make sure that no body For this, data is transmitted to the MINI contact occurs. Response Center which serve to determine the necessary rescue measures. E.g., the current position of the vehicle, Preparation if it can be established. 1. Check whether the battery of the other If you can no longer hear the MINI Re- vehicle has a voltage of 12 volts. The sponse Center through the loudspeakers, voltage information can be found on the the hands-free system, for instance, may battery. be broken. However, the MINI Response Center may still be able to hear you. 2. Switch off the engine of the assisting The MINI Response Center ends the Emer- vehicle. gency Request. 3. Switch off any electronic systems/power consumers in both vehicles. Jump-starting

General information If the battery is discharged, the engine can be started using the battery of another vehi-

300 Online Edition for Part no. 01402723835 - VI/18 Seite 301

Breakdown assistance MOBILITY

Starting aid terminals starting aid terminal of the vehicle to be started. 4. Attach one terminal clamp of the negative jumper cable to the negative terminal of the battery, or to the corresponding engine or body ground of assisting vehicle. 5. Attach the second terminal clamp to the negative terminal of the battery, or to the corresponding engine or body ground of the vehicle to be started. The starting aid terminal in the engine compartment acts as the battery's positive terminal. Starting the engine Open the cover of the starting aid terminal. Never use spray fluids to start the engine. 1. Start the engine of the assisting vehicle and let it run for several minutes at an increased idle speed. 2. Start the engine of the vehicle that is to be started in the usual way. If the first starting attempt is not successful, wait a few minutes before making another attempt in order to allow the discharged battery to recharge. A special connection on the body acts as the 3. Let both engines run for several mi- battery negative terminal. nutes. 4. Disconnect the jumper cables in the re- Connecting the cables verse order. Check the battery and recharge, if needed. To prevent personal injury or damage to both vehicles, adhere strictly to the following procedure. Tow-starting and towing 1. Pull off the lid of the starting aid terminal. Safety information 2. Attach one terminal clamp of the positive jumper cable to the positive terminal of the battery, or to the correspond- WARNING ing starting aid terminal of the vehicle Due to system limits, individual functions providing assistance. can malfunction during tow-starting/ 3. Attach the terminal clamp on the other towing with the Intelligent Safety systems end of the cable to the positive terminal activated. There is a risk of an accident. of the battery, or to the corresponding Switch all Intelligent Safety systems off prior to tow-starting/towing.

301 Online Edition for Part no. 01402723835 - VI/18 Seite 302

MOBILITY Breakdown assistance

Steptronic transmission with – Lift the vehicle using suitable means. driven front axle: transporting the – Do not lift or secure the vehicle by its vehicle tow fitting, body parts, or suspension parts. General information The vehicle must not be towed if the front Steptronic transmission with ALL4: wheels are touching the ground. transporting the vehicle Safety information General information The vehicle is not permitted to be towed. NOTICE The vehicle can be damaged when towing Pushing the vehicle the vehicle with a lifted rear axle. There is To remove a broken-down vehicle from the a risk of damage to property. Have vehicle danger area, it can be pushed for a short transported only with lifted front axle or distance. on a loading platform. Roll or push, refer to page 131, the vehicle.

Pushing the vehicle Tow truck To remove a broken-down vehicle from the danger area, it can be pushed for a short distance. Roll or push, refer to page 131, the vehicle.

Tow truck

The vehicle should only be transported on a loading platform.

NOTICE The vehicle can become damaged when lifting and securing it. Your vehicle should be transported with a There is a risk of damage to property. tow truck with a so-called lift bar or on a flat bed. – Lift the vehicle using suitable means. – Do not lift or secure the vehicle by its tow fitting, body parts, or suspension NOTICE parts. The vehicle can become damaged when lifting and securing it. There is a risk of damage to property.

302 Online Edition for Part no. 01402723835 - VI/18 Seite 303

Breakdown assistance MOBILITY

Manual transmission Tow truck

Towing or pushing the vehicle With driven front axle A broken-down vehicle can be towed or pushed. Roll or push, refer to page 128, the vehicle.

NOTICE If manual unlocking of the parking brake is not possible, the vehicle cannot be moved or towed. There is a risk of damage to property. The vehicle should only be Have your vehicle transported with a tow transported on a loading platform. truck with a so-called lift bar or on a flat bed. Follow the following instructions: – Make sure that the ignition is switched on; otherwise, the low beams, tail lights, NOTICE turn signals, and wipers may be unavail- The vehicle can become damaged when able. lifting and securing it. – Do not tow the vehicle with the rear There is a risk of damage to property. axle tilted, as the front wheels could – Lift the vehicle using suitable means. turn. – Do not lift or secure the vehicle by its – When the engine is stopped, there is no tow fitting, body parts, or suspension power assist. Consequently, more force parts. needs to be applied when braking and steering. – Larger steering wheel movements are With ALL4 required. – The towing vehicle must not be lighter than the vehicle being towed; otherwise, it will not be possible to control the vehicle's response. – Do not exceed a towing speed of 30 mph/50 km/h. – Do not exceed a towing distance of 30 miles/50 km. Have your vehicle transported on a flatbed surface only

303 Online Edition for Part no. 01402723835 - VI/18 Seite 304

MOBILITY Breakdown assistance

NOTICE NOTICE The vehicle can be damaged when towing If the tow bar or tow rope is attached in- the vehicle with a single lifted axle. There correctly, damage to other vehicle parts is a risk of damage to property. The vehi- can occur. There is a risk of damage to cle should only be transported on a loading property. Correctly attach the tow bar or platform. tow rope to the tow fitting.

NOTICE Tow bar The vehicle can become damaged when The tow fittings used should be on the same lifting and securing it. side on both vehicles. There is a risk of damage to property. Should it prove impossible to avoid mounting the tow bar at an offset angle, please fol- – Lift the vehicle using suitable means. low the following: – Do not lift or secure the vehicle by its – Maneuvering capability is limited going tow fitting, body parts, or suspension around corners. parts. – The tow bar will generate lateral forces if it is secured with an offset. Towing other vehicles Tow rope General information When starting to tow the vehicle, make Switch on the hazard warning system, de- sure that the tow rope is taut. pending on local regulations. Use nylon ropes or straps, which will enable If the electrical system has failed, clearly the vehicle to be towed without jerking. identify the vehicle being towed by placing a sign or a warning triangle in the rear win- Tow fitting dow. General information Safety information

WARNING If the approved gross vehicle weight of the towing vehicle is lighter than the vehicle to be towed, the tow fitting can tear off or it will not be possible to control the vehicle's response. There is a risk of an accident. Make sure that the gross vehicle weight of the towing vehicle is heavier The screw-in tow fitting should always be than the vehicle to be towed. carried in the vehicle. The tow fitting can be screwed in at the front or rear of the vehicle.

304 Online Edition for Part no. 01402723835 - VI/18 Seite 305

Breakdown assistance MOBILITY

The tow fitting and the onboard vehicle tool Tow-starting kit, refer to page 287, are together in the cargo area. Steptronic transmission Use of the tow fitting: Do not tow-start the vehicle. – Use only the tow fitting provided with Tow-starting the engine is not possible due the vehicle and screw it all the way in. to the Steptronic transmission. – Use the tow fitting for towing on paved Have the reasons for the starting difficulties roads only. corrected by a dealer’s service center or an- – Avoid lateral loading of the tow fitting, other qualified service center or repair for instance do not lift the vehicle by the shop. tow fitting. Manual transmission Safety information If possible, do not tow-start the vehicle but start the engine by jump-starting, refer to page 300. If the vehicle is equipped with a NOTICE catalytic converter, only tow-start while the If the tow fitting is not used as intended, engine is cold. there may be damage to the vehicle or to the tow fitting. There is a risk of damage 1. Switch on the hazard warning system to property. Follow the notes on using the and comply with local regulations. tow fitting. 2. Switch on the ignition, refer to page 112. 3. Engage third gear. Screw thread for tow fitting 4. Have the vehicle tow-started with the clutch pedal pressed and slowly release the pedal. After the engine starts, immediately press on the clutch pedal again. 5. Stop at a suitable location, remove the tow bar or rope, and switch off the hazard warning system. 6. Have the vehicle checked by a dealer’s service center or another qualified service center or repair shop. Threaded holes for the tow fitting are located in the front and rear of the vehicle on the right side with respect to the direction of travel. Press on the mark on the edge of the cover to push it out.

305 Online Edition for Part no. 01402723835 - VI/18 Seite 306

MOBILITY Care

Care

Vehicle features and options Distances and temperature – Maximum temperature: 140 ℉/60 ℃. This chapter describes all standard, country- – Minimum distance from sensors, cam- specific and optional features offered with eras, seals: 12 inches/30 cm. the series. It also describes features that are – Minimum distance from glass sunroof: not necessarily available in your vehicle, 31.5 in/80 cm. e. g., due to the selected options or country versions. This also applies to safety-related Automatic vehicle washes functions and systems. When using these functions and systems, the applicable laws and regulations must be observed. Safety information

NOTICE Washing the vehicle Improper use of automatic vehicle washes can cause damage to the vehicle. There is General information a risk of damage to property. Follow the following instructions: Regularly remove foreign objects such as leaves in the area below the windshield – Give preference to cloth vehicle when the hood is raised. washes or those that use soft brushes in order to avoid paint damage. Wash your vehicle frequently, particularly in winter. Intense soiling and road salt can – Avoid vehicle washes with guide rails damage the vehicle. higher than 4 in/10 cm to avoid damage to the chassis. Steam jets or high-pressure – Observe the tire width of the guide washers rail to avoid damage to tires and rims. – Fold in exterior mirrors to avoid dam- Safety information age to the exterior mirrors. – With rod antenna: unscrew the rod antenna to avoid rod antenna break- NOTICE age. When cleaning with high-pressure wash- – Deactivate the wiper and, if neces- ers, components can be damaged due to sary, rain sensor to avoid damage to the pressure or temperatures being too the wiper system. high. There is a risk of damage to property. Maintain sufficient distance and do not spray too long continuously. Follow the Driving into a vehicle wash with a operating instructions for the high-pres- manual transmission sure washer. In vehicle washes, the vehicle must be able to roll freely.

306 Online Edition for Part no. 01402723835 - VI/18 Seite 307

Care MOBILITY

Rolling or pushing the vehicle, refer to Vehicle care page 128.

Driving into a vehicle wash with a Vehicle care products Steptronic transmission General information In vehicle washes, the vehicle must be able to roll freely. MINI recommends using vehicle care and cleaning products from MINI. Suitable care Rolling or pushing the vehicle, refer to products are available from a dealer’s serv- page 131. ice center or another qualified service cen- Some vehicle washes do not permit persons ter or repair shop. in the vehicle. The vehicle cannot be locked from the outside when in selector lever po- Safety information sition N. A signal is sounded when an attempt is made to lock the vehicle. WARNING Driving out of a vehicle wash Cleansers can contain substances that are Ensure that the vehicle key is in the car. dangerous and harmful to your health. There is a risk of injury. When cleaning Start the engine, refer to page 113. the interior, open the doors or windows. Only use products intended for cleaning Headlights vehicles. Follow the instructions on the Do not rub wet headlights dry and do not container. use abrasive or acidic cleaning agents. Soak areas that have been dirtied, for instance from insects, with shampoo and Vehicle paint wash off with water. General information Thaw ice with de-icing spray; do not use an ice scraper. Regular care contributes to driving safety and value retention. Environmental influen- After washing the vehicle ces in areas with elevated air pollution or natural contaminants, such as tree resin or After washing the vehicle, apply the brakes pollen can affect the vehicle's paintwork. briefly to dry them; otherwise, braking ac- Tailor the frequency and extent of your ve- tion can be reduced. The heat generated hicle care to these influences. during braking dries brake discs and brake pads and protects them against corrosion. Aggressive substances such as spilled fuel, oil, grease or bird droppings, must be re- Completely remove all residues on the win- moved immediately to prevent the finish dows, to minimize loss of visibility due to from being altered or discolored. smearing and to reduce wiper noises and wiper blade wear.

307 Online Edition for Part no. 01402723835 - VI/18 Seite 308

MOBILITY Care

Safety information Clean the upholstery down to the seams using large sweeping motions. Avoid rubbing the material vigorously. WARNING Improperly performed work on the vehicle Safety information paint can lead to a failure or malfunction of the radar sensors and thereby result in a safety risk. There is a risk of accidents or NOTICE risk of damage to property. Have paint- Open Velcro® fasteners on articles of work or paintwork repairs on bumpers of clothing can damage the seat covers. vehicles with radar sensors performed by a There is a risk of damage to property. En- dealer’s service center or another qualified sure that any Velcro® fasteners are closed. service center or repair shop only. Caring for special components Matte finish Only use cleaning and care products suita- Light-alloy wheels ble for vehicles with matte finish. When cleaning the vehicle, use only neutral wheel cleaners having a pH value from 5 to Leather care 9. Do not use abrasive cleaning agents or Remove dust from the leather regularly, us- steam jets above 140 ℉/60 ℃. Follow the ing a cloth or vacuum cleaner. manufacturer's instructions. Otherwise, particles of dust and road grime Aggressive, acidic or alkaline cleaning chafe in pores and folds, and lead to in- agents can destroy the protective layer of creased wear and premature degradation of adjacent components, such as the brake the leather surface. disc. To guard against discoloration, such as from After cleaning, apply the brakes briefly to clothing, clean leather and provide leather dry them. The heat generated during brak- care roughly every two months. ing dries brake discs and brake pads and protects them against corrosion. Clean light-colored leather more frequently because soiling on such surfaces is substan- tially more visible. Chrome surfaces Use leather care products; otherwise, dirt Carefully clean components such as the ra- and grease will gradually break down the diator grille or door handles with an ample protective layer of the leather surface. supply of water, possibly with shampoo added, particularly when they have been ex- Upholstery material care posed to road salt. Rubber components General information Environmental influences can cause surface Vacuum the upholstery regularly with a soiling of rubber parts and a loss of gloss. vacuum cleaner. Use only water and suitable cleaning agents If upholstery is very dirty, for instance with for cleaning. beverage stains, use a soft sponge or microfiber cloth with a suitable interior cleaner.

308 Online Edition for Part no. 01402723835 - VI/18 Seite 309

Care MOBILITY

Treat especially worn rubber parts with rub- Dirty belt straps impede the reeling action ber care agents at regular intervals. When and thus have a negative impact on safety. cleaning rubber seals, do not use any sili- Use only a mild soapy solution, with the con-containing vehicle care products in or- safety belts clipped into their buckles. der to avoid damage or noises. Safety belts should only be allowed to re- Fine wood parts tract if they are dry. Clean fine wood facing and fine wood com- Carpets and floor mats ponents only with a moist rag. Then dry with a soft cloth. WARNING Plastic components Objects in the driver's floor area can limit the pedal distance or block a depressed pedal. There is a risk of an accident. Stow NOTICE objects in the vehicle such that they are Cleansers that contain alcohol or solvents, secured and cannot enter into the driver's such as lacquer thinners, heavy-duty floor area. Use floor mats that are suitable grease removers, fuel, or such, can damage for the vehicle and can be safely attached plastic parts. There is a risk of damage to to the floor. Do not use loose floor mats property. Clean with a microfiber cloth. and do not layer several floor mats. Make Dampen cloth lightly with water. sure that there is sufficient clearance for the pedals. Ensure that the floor mats are Plastic components are e.g.: securely fastened again after they were re- – Imitation leather surfaces. moved, for instance for cleaning. – Roofliner. Floor mats can be removed from the car's – Light lenses. interior for cleaning. – Instrument cluster cover. If the floor carpets are very dirty, clean with – Matt black spray-coated components. a microfiber cloth and water or a textile – Painted parts in the car's interior. cleaner. To prevent matting of the carpet, Clean with a microfiber cloth. rub back and forth in the direction of travel only. Dampen cloth lightly with water. Do not soak the roofliner. Sensor/camera lenses To clean sensors and camera lenses, use a Safety belts cloth moistened with a small amount of glass detergent. WARNING Chemical cleansers can destroy the safety belt webbing. Missing protective effect of the safety belts. There is a risk of injuries or danger to life. Use only a mild soapy solution for cleaning the safety belts.

309 Online Edition for Part no. 01402723835 - VI/18 Seite 310

MOBILITY Care

Displays/Screens/Projection lenses

NOTICE Chemical cleansers, moisture or fluids of any kind can damage the surface of displays and screens. There is a risk of damage to property. Clean with a clean, antistatic microfiber cloth.

NOTICE The surface of displays can be damaged with improper cleaning. There is a risk of damage to property. Avoid pressure that is too high and do not use any scratching materials.

Clean with a clean, antistatic microfiber cloth. For stubborn soiling on the projection lens of the Head-up Display, dampen the microfiber cloth with alcohol. Projection lens, refer to page 152. Long-term vehicle storage When the vehicle is shut down for longer than three months, special measures must be taken. Further information is available from a dealer’s service center or another qualified service center or repair shop.

310 Online Edition for Part no. 01402723835 - VI/18 Seite 311

Care MOBILITY

311 Online Edition for Part no. 01402723835 - VI/18

312 Online Edition for Part no. 01402723835 - VI/18 REFERENCE

Technical data ...... 314 Appendix ...... 317 Everything from A to Z ...... 318

313 Online Edition for Part no. 01402723835 - VI/18 Seite 314

REFERENCE Technical data

Technical data

General information The technical data and specifications in this values can be found in the approval docu- Owner's Manual are used as guidance val- ments, on labels on the vehicle or can be ob- ues. The vehicle-specific data can deviate tained from a dealer’s service center or an- from this, for instance due to the selected other qualified service center or repair special equipment, country version or coun- shop. try-specific measurement method. Detailed

Dimensions The dimensions can vary depending on the tenna, roof racks or spoiler. The heights can model version, equipment or country-spe- deviate, for instance due to the selected cific measurement method. special equipment, tires, load and chassis The specified heights do not take into ac- version. count attached parts, for instance a roof an-

MINI Countryman Width with mirrors inches/mm 78.9/2,005 Width without mirrors inches/mm 71.7/1,822 Height inches/mm 61.3/1,557 Length inches/mm 169.8/4,314 Wheelbase inches/mm 105.1/2,670 Smallest turning radius diam. ft/m 37.5/11.4

314 Online Edition for Part no. 01402723835 - VI/18 Seite 315

Technical data REFERENCE

Weights

MINI Cooper Countryman Approved gross vehicle weight Manual transmission lbs/kg 4,321/1,960 Steptronic transmission lbs/kg 4,376/1,985 Load lbs/kg 860/390 Approved front axle load Manual transmission lbs/kg 2,249/1,020 Steptronic transmission lbs/kg 2,315/1,050 Approved rear axle load lbs/kg 2,183/990

MINI Cooper S Countryman Approved gross vehicle weight lbs/kg 4,542/2,060 Load lbs/kg 926/420 Approved front axle load lbs/kg 2,403/1,090 Approved rear axle load lbs/kg 2,205/1,000

MINI Cooper Countryman ALL4 Approved gross vehicle weight Manual transmission lbs/kg 4,530/2,055 Steptronic transmission lbs/kg 4,564/2,070 Load lbs/kg 860/390 Approved front axle load Manual transmission lbs/kg 2,359/1,070 Steptronic transmission lbs/kg 2,403/1,090 Approved rear axle load lbs/kg 2,293/1,040

315 Online Edition for Part no. 01402723835 - VI/18 Seite 316

REFERENCE Technical data

MINI Cooper S Countryman ALL4 Approved gross vehicle weight Manual transmission lbs/kg 4,674/2,120 Steptronic transmission lbs/kg 4,696/2,130 Load lbs/kg 926/420 Approved front axle load Manual transmission lbs/kg 2,425/1,100 Steptronic transmission lbs/kg 2,469/1,120 Approved rear axle load lbs/kg 2,315/1,050

MINI John Cooper Works Countryman ALL4 Approved gross vehicle weight Manual transmission lbs/kg 4,696/2,130 Steptronic transmission lbs/kg 4,740/2,150 Load lbs/kg 926/420 Approved front axle load Manual transmission lbs/kg 2,458/1,115 Steptronic transmission lbs/kg 2,491/1,130 Approved rear axle load lbs/kg 2,337/1,060

Capacities

MINI Countryman US gal/liters Notes Fuel tank, approx. 16.1/61.0 Fuel quality, refer to page 254.

316 Online Edition for Part no. 01402723835 - VI/18 Seite 317

Appendix REFERENCE

Appendix

Any updates to the Owner's Manual of the vehicle are listed here.

Updates made after the editorial deadline These chapters of the printed Owner's Manual contain updates made after the editorial deadline: – Information: Data storage, refer to page 12.

317 Online Edition for Part no. 01402723835 - VI/18 Seite 318

REFERENCE Everything from A to Z

Everything from A to Z

Index A Antilock Brake System, ABS 184 Anti-slip control, see DSC 184 ABS, Antilock Brake System 184 Anti-theft protection, lug bolts 271 Acceleration Assistant, see Launch Con- Approach control warning with city light trol 135 braking function 175 Accessories and parts 10 Approved axle load 315 ACC, see Camera-based cruise control 189 Apps, see Owner's Handbook for Naviga- Activated-charcoal filter 215 tion, Entertainment, Communication 8 Activation times, parked-car ventila- Arrival time 149 tion 216 Ash tray 222 Active Cruise Control, see Camera-based Assistance when driving off 187 cruise control 189 AUTO intensity 214 Active Guard, see Intelligent Safety 174 Automatic climate control 212 Adaptive brake lights, see Brake force dis- Automatic Curb Monitor 104 play 181 Automatic deactivation, front-seat passen- Adaptive chassis 186 ger airbags 165 Additives, engine oil types 281 Automatic headlight control 158 Adjustments, steering wheel 105 Automatic locking 86 After washing vehicle 307 Automatic recirculated-air control 214 Airbags 163 Automatic transmission with Step- Airbags, indicator and warning light 165 tronic 128 Air circulation, see Recirculated-air Automatic unlocking 87 mode 210, 214 Automatic vehicle wash 306 Air conditioner 209 AUTO program, automatic climate con- Air conditioning 210, 213 trol 213 Air, dehumidifying, see Air condition- AUTO program, intensity 214 ing 210, 213 Auto Start/Stop function 115 Air distribution, manual 211, 215 Auto washing 306 Air flow, air conditioner 211 Average fuel consumption 148 Air flow, automatic climate control 214 Average speed 149 Air pressure, tires 256 Axle loads, weights 315 Air vents, see Ventilation 215 Alarm system 87 B Alarm triggering 87 Alarm, unintentional 88 Backrest curvature, see Lumbar sup- Alertness assistant 182 port 95, 96 ALL4 186 Backrest, seats 94 All-season tires, see Winter tires 264 Band-aids, see First-aid kit 298 All-wheel drive, see ALL4 186 Battery replacement, vehicle battery 296 Antifreeze, washer fluid 126 Battery, vehicle 295

318 Online Edition for Part no. 01402723835 - VI/18 Seite 319

Everything from A to Z REFERENCE

Being towed, see Tow-starting and tow- Cargo area lid 80 ing 301 Cargo area, loading 229 Belts, safety belts 98 Cargo area, seating surface 234 Beverage holder, cup holder 226 Cargo area, storage compartments 230 Blocking, power window 90 Cargo cover 229 Bluetooth connection 59 Cargo position, rear seat backrest 230 Bonus range, GREEN Mode 246 Cargo, stowing and securing 229 Bottle holder, see Cup holder 226 Cargo straps 229 Brake assistant 184 Carpet, care 309 Brake discs, break-in 238 Catalytic converter, see Hot exhaust gas Brake force display 181 system 239 Brake lights, brake force display 181 CBS Condition Based Service 285 Brake pads, break-in 238 Center armrest 226 Braking, information 240 Center console 40 Breakdown assistance 298 Central Information Display (CID) 42 Break-in 238 Central Information Display (CID) operating Brightness of Control Display 56 concept 42 Bug light 289 Central instrument cluster, LED ring 151 Bulb replacement 288 Central locking system, unlocking, from in- Bulb replacement, front 289, 292 side 75 Bulb replacement, rear 294 Central screen, see Control Display 44 Bulb replacement, side 295 Changes, technical, see For Your Own Bulbs and lights 288 Safety 9 Button, SOS 299 Changing parts 287 Button, Start/Stop 112 Changing wheels 270 Bypassing, see Jump-starting 300 Changing wheels/tires 263 Chassis number, see Vehicle identification C number 15 Check Control 138 Calendar, see Owner's Handbook for Naviga- Checking the oil level electronically 279 tion, Entertainment, Communication 8 Children, seating position 107 California Proposition 65 Warning 10 Children, transporting safely 107 Calling up mirror adjustment 86 Child restraint system 107 Calling up seat adjustment 86 Child restraint system LATCH 109 Camera-based assistance systems, see Intel- Child restraint systems, mounting 108 ligent Safety 174 Child safety locks 111 Camera-based cruise control 189 Child seat, mounting 108 Camera lenses, care 309 Child seats 107 Camera, rearview camera 202 Chrome parts, care 308 Can holder, see Cup holder 226 Cigarette lighter 222 Care, displays 310 Cleaning, displays 310 Care, vehicle 307 Climate control 209, 212 Care, washing the vehicle 306 Clothes hooks 227 Cargo area 228 Coasting 247 Cargo area, adapting size 232 Coasting with engine decoupled, coast- Cargo area, enlarging 230 ing 247

319 Online Edition for Part no. 01402723835 - VI/18 Seite 320

REFERENCE Everything from A to Z

Coasting with idling engine 247 Cruise control without distance control, see Combination switch, see Turn signals 119 Cruise control 196 Combi switch, see Wiper system 120, 123 Cruising range 143 Comfort Access 76 Cup holder 226 Compartments in the doors 226 Current consumption 144 Compass 220 Compatible devices, see Suitable devi- D ces 59 Compressor 265 Damage, tires 262 Computer, see Onboard Computer 147 Data memory 12 Condensation on windows 215 Data protection, settings 57 Condensation under the vehicle 241 Data, technical 314, 316 Condition Based Service CBS 285 Date 55 Configuring driving program 187 Date display 143 Confirmation signal 87 Daytime running lights 159 Connecting device 58 DCC, see Cruise control 196 Connecting mobile phone 58 Defrosting, see Defrosting the win- Connecting smartphone 58 dows 211 Connecting telephone 58 Defrosting, see Windows, defrosting 215 Connections 58 Defrosting the windows 211 Consumption, see Current consump- Dehumidifying, air 210, 213 tion 144 Deleting personal data 57 Contacts, see Owner's Handbook for Naviga- Deletion of personal data 57 tion, Entertainment, Communication 8 Destination distance 149 Continued driving with a flat tire 170, 173 Device list 58 Control Display 44 Digital clock 143 Control Display, settings 54 Digital compass 220 Controller 45 Dimensions 314 Controller operation 46 Dimmable exterior mirrors 104 Control systems, driving stability 184 Dimmable interior mirror 105 Convenient closing 72 Direction indicator, see Turn signals 119 Convenient opening 71 Display, electronic, instrument cluster 138 Coolant 283 Display, engine temperature 149 Cooling, maximum 213 Display, GREEN Mode 244 Cooling system 283 Display lighting, see Instrument light- Cornering light 159 ing 161 Corrosion on brake discs 241 Displays 137 Cosmetic mirror 222 Displays, care 310 Country timer 155 Disposal, coolant 284 Coupling, see Pairing 58 Disposal, vehicle battery 297 Courtesy lights during unlocking 71 Distance control, see PDC 198 Courtesy lights with the vehicle locked 72 Distance to destination 149 Cruise control 196 Divided screen view, split screen 43 Cruise control, active 189 Drive-off assistant 187 Cruise control with distance control, see Drive-off assistant, see DSC 184 Camera-based cruise control 189

320 Online Edition for Part no. 01402723835 - VI/18 Seite 321

Everything from A to Z REFERENCE

Driver assistance, see Intelligent Energy control 144 Safety 174 Engine, automatic Start/Stop function 115 Driver profiles 83 Engine, automatic switch-off 115 Driver profiles, exporting profiles 85 Engine compartment 276 Driver profiles, importing profiles 85 Engine compartment, working in 277 Driving Dynamics Control, see MINI Driv- Engine coolant 283 ing Modes switch 186 Engine idling when driving, coasting 247 Driving Excitement, SPORT 150 Engine oil 279 Driving instructions, break-in 238 Engine oil, adding 280 Driving mode, GREEN 244 Engine oil change 282 Driving mode, GREEN driving style analy- Engine oil filler neck 280 sis 248 Engine oil types to add 281 Driving modes 186 Engine start, jump-starting 300 Driving notes, general 239 Engine start, see Starting the engine 113 Driving on poor roads 241 Engine stop 114 Driving on racetracks 242 Engine temperature, display 149 Driving stability control systems 184 Entering a destination, see Owner's Hand- Driving style analysis 248 book for Navigation, Entertainment, Com- Driving tip, GREEN tip 246 munication 8 Driving tips 239 Entering an address, navigation, see Own- DSC Dynamic Stability Control 184 er's Manual for Navigation, Entertainment DTC Dynamic Traction Control 185 and Communication 8 DVD, Video, see Owner's Handbook for Nav- Entering a vehicle wash 306 igation, Entertainment, Communication 8 Equipment, interior 218 Dynamic damping, see Adaptive chas- Error displays, see Check Control 138 sis 186 ESP Electronic Stability Program, see Dynamic Stability Control DSC 184 DSC 184 Dynamic Traction Control DTC 185 Exchanging wheels/tires 263 Exhaust gas system 239 E Exiting a vehicle wash 306 Exterior mirror, automatic dimming fea- Easy Opener 78 ture 104 Electronic displays, instrument cluster 138 Exterior mirrors 103 Electronic oil measurement 279 Exterior mirrors, Automatic Curb Moni- Electronic Stability Program ESP, see tor 104 DSC 184 Exterior mirrors, malfunction 104 E-mail, see Owner's Handbook for Naviga- External start 300 tion, Entertainment, Communication 8 External temperature display 143 Emergency release, fuel filler flap 253 External temperature warning 143 Emergency Request 299 Eyes for securing cargo 229 Emergency service, see Breakdown assistance 298 F Emergency unlocking, transmission lock 135 Failure message, see Check Control 138 Emergency wheel, compact wheel, see False alarm, see Unintentional alarm 88 Emergency wheel 274 Fan, see Air flow 211, 214

321 Online Edition for Part no. 01402723835 - VI/18 Seite 322

REFERENCE Everything from A to Z

Fastening safety belts, see Safety belts 98 Gasoline 254 Filler neck for engine oil 280 Gear shift indicator 145 Finding charging stations, see Charging sta- General driving notes 239 tions and points of interest, see Owner's General settings 54 Handbook for Navigation, Entertainment, Glare shield 222 Communication 8 Glass sunroof, initialize the system 93 Fine wood, care 309 Glass sunroof, see Panoramic glass sun- First-aid kit 298 roof 91 Fish, MINIMALISM display 248 Glove compartment 225 Flat tire, changing wheels 270 GPS geolocation, vehicle position 55 Flat Tire Monitor FTM 172 GPS, navigation, see Owner's Handbook for Flat tire, repairing 265 Navigation, Entertainment, Communica- Flat tire, Tire Pressure Monitor TPM 167 tion 8 Flat tire, warning light 168, 172 GREEN bonus range 246 Flooding 239 GREEN Mode 244 Floor carpet, care 309 GREEN - program, driving dynamics 186 Floor mats, care 309 GREEN tip, driving tip 246 Fogged up windows 211 Gross vehicle weight, approved 315 Fold-away position, windshield wip- Ground clearance 241 ers 122, 126 Fold back rear seat backrests 230 H Foot brake 240 For Your Own Safety 9 Halogen headlights 289 Front airbags 163 Handbrake, see Parking brake 117 Front fog lights 160 Hand-held transmitter, alternating Front-seat passenger airbags, automatic de- code 219 activation 165 Hands-free device, see Owner's Handbook Front-seat passenger airbags, indicator for Navigation, Entertainment, Communi- light 166 cation 8 Front seats 94 Hazard warning flashers 298 FTM Flat Tire Monitor 172 Head airbag 164 Fuel 254 Headlight control, automatic 158 Fuel cap 252 Headlight courtesy delay feature 158 Fuel consumption, see Average fuel con- Headlight flasher 120 sumption 148 Headlight glass 289 Fuel filler flap 252 Headlights, care 307 Fuel gauge 142 Head restraints, front 100 Fuel quality 254 Head restraints, rear 101 Fuel recommendation 254 Head-up Display 152 Fuel, tank capacity 316 Head-up Display, see Memory function 102 Fuse 297 Head-up Display, shift point indicator 155 Head-up Display, sport displays 154 G Head-up Display, standard view 153 Heavy cargo, stowing cargo 229 Garage door opener, see Integrated Univer- High-beam Assistant 159 sal Remote Control 218 High beams 120

322 Online Edition for Part no. 01402723835 - VI/18 Seite 323

Everything from A to Z REFERENCE

High beams/low beams, see High-beam As- Instrument lighting 161 sistant 159 Integrated key 74 Hills 240 Integrated Owner's Manual in the vehi- Hill start assistant, see Drive-off assis- cle 66 tant 187 Integrated Universal Remote Control 218 Holder for beverages 226 Intelligent emergency call 299 HomeLink, see Integrated Universal Remote Intelligent Safety 174 Control 218 Intended use 10 Homepage 8 Intensity, AUTO program 214 Hood 277 Interior equipment 218 Horn 38 Interior lights 161 Hot exhaust gas system 239 Interior lights during unlocking 71 Hotline, see Owner's Handbook for Naviga- Interior lights with the vehicle locked 72 tion, Entertainment, Communication 8 Interior mirror 103 HUD Head-up Display 152 Interior mirror, automatic dimming fea- Hydroplaning 239 ture 105 Interior mirror, compass 220 I Interior mirror, manually dimmable 105 Interior motion sensor 88 Ice warning, see External temperature Internet site 8 warning 143 Interval display, service requirements 144 Icy roads, see External temperature warn- Interval mode 121, 124 ing 143 In the vicinity of the center console 40 Identification marks, tires 260 In the vicinity of the roofliner 41 Identification number, see Vehicle identifi- In the vicinity of the steering wheel 38 cation number 15 IOM, see Integrated Owner's Manual in the Ignition off 112 vehicle 66 Ignition on 112 Illuminated ring, central instrument clus- J ter 151 Indication of a flat tire 168, 172 Jacking points for the vehicle jack 272 Indicator light, see Check Control 138 Jam protection system, glass sunroof 92 Individual air distribution 211, 215 Jam protection system, windows 90 Individual settings, see Driver profiles 83 Jump-starting 300 Inductive charging of a smartphone, see Wireless charging tray, see Owner's K Manual for Navigation, Entertainment, Communication 8 Keyless Go, see Comfort Access 76 Inflation pressure, tires 256 Key, see Integrated key 74 Inflation pressure warning, tires 172 Key, see Remote control 70 Info Display, see Onboard Computer 147 Kickdown, Steptronic transmission 132 Information 8 Knee airbag 164 Initialize, Tire Pressure Monitor TPM 168 Initializing, Flat Tire Monitor FTM 172 Instrument cluster 137 Instrument cluster, electronic displays 138

323 Online Edition for Part no. 01402723835 - VI/18 Seite 324

REFERENCE Everything from A to Z

L Maintenance requirements 285 Maintenance, service requirements 144 Label on recommended tires 263 Maintenance system, MINI 285 Label, runflat tires 264 Make-up mirror 222 Language, on the Control Display 54 Malfunction displays, see Check Con- Lashing eyes 229 trol 138 LATCH child restraint fixing system 109 Manual air distribution 211, 215 Launch Control 135 Manual air flow 211, 214 Leather, care 308 Manual brake, see Parking brake 117 LED ring, central instrument cluster 151 Manual mode, transmission 132 LEDs, light-emitting diodes 288 Manual operation, fuel filler flap 253 Letters and numbers, entering 47 Manual operation, PDC Park Distance Con- Light 157 trol 199 Light-alloy wheels, care 308 Manual operation, rearview camera 202 Light-emitting diodes, LEDs 288 Manual transmission 127 Lighter 222 Manufacturer of the MINI 9 Lighting 157 Map update, see Owner's Handbook for Nav- Light replacement 288 igation, Entertainment, Communication 8 Light replacement, front 289, 292 Matte finish 308 Light replacement, rear 294 Maximum cooling 213 Light replacement, side 295 Maximum speed, display 145 Lights and bulbs 288 Maximum speed, winter tires 264 Light switch 157 Measurement, units of 55 List of all messages 56 Mechanical key 74 Load 229 Medical kit 298 Loading 228 Memory function 102 Loading position 230 Menu in instrument cluster 147 Location, vehicle position 55 Menus, Central Information Display Locking, automatic 86 (CID) 46 Locking, from inside 75 Messages 56 Locking, settings 86 Messages, see Check Control 138 Low beams 157 Microfilter 211, 215 Low beams, automatic, see High-beam As- MID - program, driving dynamics 186 sistant 159 MINI Connected, see Owner's Handbook for Lower back support 96 Navigation, Entertainment, Communica- Lower back support, mechanical 95 tion 8 Lug bolt lock 271 MINI driving modes 186 Luggage rack, see Roof-mounted luggage MINI logo projection during unlocking 71 rack 241 MINI maintenance system 285 Lumbar support 96 MINIMALISM analyzer 248 Lumbar support, mechanical 95 MINIMALISM information 247 Minimum tread, tires 262 MINI Picnic Bench 234 M Mirrors 103 Mirror, see Memory function 102 Maintenance 285

324 Online Edition for Part no. 01402723835 - VI/18 Seite 325

Everything from A to Z REFERENCE

Mobile communication devices in the vehi- Oil change interval, service require- cle 239 ments 144 Mobility System 265 Oil filler neck 280 Modifications, technical, see For Your Own Oil types to add, engine 281 Safety 9 Old batteries, disposal 297 Moisture in headlight 289 Onboard Computer 147 Monitor, see Control Display 44 Onboard Diagnostics OBD 286 Mounting of child restraint systems 108 Onboard literature, printed 66 MP3 player, see Audio, see Owner's Hand- Onboard vehicle tool kit 287 book for Navigation, Entertainment, Com- On-call service, see Breakdown assis- munication 8 tance 298 Multifunction steering wheel, buttons 38 Opening and closing 70 Multimedia, see Owner's Manual for Naviga- Opening, from inside 75 tion, Entertainment and Communication 8 Operating menus, Central Information Dis- Music hard disk, see Owner's Handbook for play (CID) 42 Navigation, Entertainment, Communica- Operation via the Controller 46 tion 8 Operation via touchscreen 47 Optional equipment 9 N Outside air, see Automatic recirculated-air control 214 Navigation, see Owner's Manual for Naviga- Owner's Manual media 66 tion, Entertainment and Communication 8 Owner's Manual, printed 66 Neck restraints, front, see Head restraints 100 P Neck restraints, rear, see Head restraints 101 Paint, vehicle 307 Neutral cleaner, see Wheel cleaner 308 Panic alarm, see Panic mode 88 New wheels and tires 263 Panic mode 88 Notes, see Owner's Handbook for Naviga- Panoramic glass sunroof 91 tion, Entertainment, Communication 8 Parallel parking assistant 204 No-touch closing of the tailgate 78 Park Distance Control PDC 198 No-touch opening of the tailgate 78 Parked-car ventilation 216 Parked vehicle, condensation 241 O Parking aid, see PDC 198 Parking assistant 204 OBD Onboard Diagnostics 286 Parking brake 117 Obstacle marking, rearview camera 203 Parking lights 157 Octane rating, see Recommended fuel Parts and accessories 10 grade 255 Passenger's side mirror, tilting 104 Odometer 142 Pathway lines, rearview camera 203 Office, see Owner's Manual for Navigation, PDC Park Distance Control 198 Entertainment and Communication 8 Performance Control 186 Oil 279 Personal profile, see Driver profiles 83 Oil, adding 280 Person warning with City light braking Oil change 282 function 179 Picnic Bench 234

325 Online Edition for Part no. 01402723835 - VI/18 Seite 326

REFERENCE Everything from A to Z

Plastic, care 309 Reporting safety malfunctions 15 Poor roads, driving on 241 RES CNCL button, see Camera-based cruise PostCrash — iBrake 183 control 189 Power failure 296 RES CNCL button, see Cruise control 196 Power windows 89 Reserve warning, see Range 143 Pressure, tires 256 Reset, Tire Pressure Monitor TPM 168 Pressure warning, tires 172 Retreaded tires 263 Printed onboard literature 66 Roadside Assistance, see Breakdown assis- Profiles, see Driver profiles 83 tance 298 Programmable memory buttons, Central In- Roadside parking lights 158 formation Display (CID) 49 Rolling code hand-held transmitter 219 Protective function, glass sunroof 92 RON recommended fuel grade 255 Protective function, windows 90 Roofliner 41 Push-and-turn reel, see Controller 45 Roof load capacity 315 Roof-mounted luggage rack 241 R Route, navigation, see Owner's Handbook for Navigation, Entertainment, Communi- Racetrack operation 242 cation 8 Radiator fluid 283 RSC Runflat System Component, see Runflat Radio-operated remote control, see Remote tires 264 control 70 Rubber components, care 308 Radio-ready state 113 Runflat tires 264 Radio, see Owner's Manual for Navigation, Entertainment and Communication 8 S Rain sensor 121, 124 Ratchet straps 229 Safe braking 240 Rear lights 294 Safety belt reminder for driver's seat and Rear seats 97 front passenger seat 100 Rearview camera 201 Safety belts 98 Rear window defroster 211, 215 Safety belts, care 309 Rear window wiper, operation 122, 125 Safety locks, doors, and windows 111 Recirculated-air filter 215 Safety switch, windows 90 Recirculated-air mode 210, 214 Safety systems, airbags 163 Recommended fuel grade 255 Saving fuel 243 Recommended tire brands 263 Screen, see Control Display 44 Refueling 252 Screwdriver 287 Remaining range 143 Sealant, see Mobility System 265 Remote control, additional 73 Seat heating, front 97 Remote control, loss 73 Seating position for children 107 Remote control, malfunction 73 Seat, see Memory function 102 Remote control, opening/closing 70 Seats, front 94 Remote control, replacing the battery 73 Seats, rear 97 Remote control, universal 218 Securing cargo 229 Replacing parts 287 Selection list in instrument cluster 147 Replacing the battery, remote control 73 Sensors, care 309 Replacing wheels/tires 263 Service and warranty 11

326 Online Edition for Part no. 01402723835 - VI/18 Seite 327

Everything from A to Z REFERENCE

Service requirements, Condition Based Start/stop, automatic function 115 Service CBS 285 Start/Stop button 112 Service requirements, display 144 Starting the engine 113 Servotronic 188 Stations, AM/FM, see Owner's Handbook SET button, see Camera-based cruise con- for Navigation, Entertainment, Communi- trol 189 cation 8 SET button, see Cruise control 196 Status control display, tires 167 Settings, locking/unlocking 86 Status information, Central Information Dis- Settings, mirrors 103 play (CID) 43 Settings on the Control Display 54 Status of Owner's Manual 9 Shift gate rotary switch 186 Status, vehicle 156 Shift paddles on the steering wheel 133 Steering assistance 188 Shift point indicator, Head-up Display 155 Steering wheel, adjusting 105 Side airbag 163 Steptronic Sport transmission, see Step- Signaling, horn 38 tronic transmission 128 Signals when unlocking 87 Steptronic Sport transmission with double Sitting safely 94 clutch, see Steptronic transmission 128 Size 314 Steptronic transmission 128 Slide/tilt glass roof 91 Steptronic transmission with double clutch, SMS, see Short messages, see Owner's see Steptronic transmission 128 Handbook for Navigation, Entertainment, Stopping the engine 114 Communication 8 Storage compartments 225 SMS text messages, supplementary 142 Storage, tires 264 Snow chains 269 Storing the vehicle 310 Socket 223 Stowing and securing cargo 229 Socket, OBD Onboard Diagnostics 286 Suitable devices 59 Software update 64 Suitable mobile phones 59 SOS button 299 Summer tires, tread 261 Sound output, see Owner's Handbook for Sun visor 222 Navigation, Entertainment, Communica- Supplementary Owner's Manuals 66 tion 8 Supplementary SMS text messages 142 Spare tire, see Emergency wheel 274 Switch for driving dynamics 186 Speed, average 149 Switch, see Cockpit 38 Speed Limit Info 145 Symbols 8 Speed Limit Info, Onboard Computer 149 Speed limits, display 145 T Speed warning 151 Split screen 43 Tachometer 142 Sport displays 150 Tailgate 80 Sport displays, Head-up Display 154 Tailgate, closing with no-touch activa- SPORT program, driving dynamics 187 tion 78 Sport program, transmission 132 Tailgate, opening with no-touch activa- Stability control systems 184 tion 78 Standard equipment 9 Tailgate via remote control 72 Standard view, Head-up Display 153 Tail lights 294 Stars, MINIMALISM display 248

327 Online Edition for Part no. 01402723835 - VI/18 Seite 328

REFERENCE Everything from A to Z

Technical changes, see For Your Own Traffic bulletins, see Owner's Handbook for Safety 9 Navigation, Entertainment, Communica- Technical data 314, 316 tion 8 Telephone, see Owner's Manual for Naviga- Transmission lock, electronic unlock- tion, Entertainment and Communication 8 ing 135 Teleservices, see Owner's Handbook for Transmission lock, releasing manually 134 Navigation, Entertainment, Communica- Transmission, manual transmission 127 tion 8 Transmission, see Steptronic transmis- Temperature, air conditioner 210 sion 128 Temperature, automatic climate con- Transporting children safely 107 trol 212 Tread, tires 261 Temperature display for external tempera- Trip computer 149 ture 143 Triple turn signal activation 119 Temperature, engine 149 Trip odometer 142 Terminal, starting aid 301 Trip recorder, see Trip odometer 142 Theft alarm system, see Alarm system 87 Turning radius lines, rearview camera 203 Thigh support 97 Turn signal, front 289, 292 Tilt alarm sensor 88 Turn signal, indicator light 141 Tilting, passenger's side mirror 104 Turn signal, side 295 Time 54 Turn signals, operation 119 Time of arrival 149 Turn signals, rear, bulb replacement 294 Tire damage 262 Tire identification marks 260 U Tire inflation pressure 256 Tire inflation pressure monitor, see Unintentional alarm 88 FTM 172 Units of measurement 55 Tire pressure 256 Universal remote control 218 Tire Pressure Monitor TPM 167 Unlocking, automatic 87 Tire repair kit, see Mobility System 265 Unlocking, settings 86 Tires, changing 263 Updates made after the editorial deadline 9 Tire sealant, see Mobility System 265 Upholstery care 308 Tires, everything on wheels and tires 256 USB connection 61 Tires, runflat 264 USB interface, position in vehicle 224 Tire tread 261 USB port, see USB interface 224 Tone, see Owner's Manual for Navigation, Use, intended 10 Entertainment and Communication 8 Using a smartphone via voice activation 51 Tools 287 Total vehicle weight 315 Touchpad 49 V Touchscreen 47 Towing 301 Vanity mirror 222 Tow-starting 301 Vehicle battery 295 TPM Tire Pressure Monitor 167 Vehicle battery, replacing 296 Traction control 185 Vehicle, break-in 238 TRACTION driving mode, driving dynam- Vehicle care 307 ics 185 Vehicle care products 307

328 Online Edition for Part no. 01402723835 - VI/18 Seite 329

Everything from A to Z REFERENCE

Vehicle features and options 9 Windshield wipers, fold-away posi- Vehicle identification number 15 tion 122, 126 Vehicle jack 272 Windshield wipers, see Wiper sys- Vehicle key, see Remote control 70 tem 120, 123 Vehicle paint 307 Winter storage, care 310 Vehicle position, vehicle location 55 Winter tires, suitable tires 264 Vehicle status 156 Winter tires, tread 262 Vehicle storage 310 Wiper blades, replacing 287 Vehicle wash 306 Wiper fluid 126 Vehicle, washing 306 Wiper system 120, 123 Ventilation 215 Wireless charging of a smartphone, see Ventilation, see Parked-car ventilation 216 Wireless charging tray, see Owner's VIN, see Vehicle identification number 15 Manual for Navigation, Entertainment, Voice activation system 51 Communication 8 Voice command response, see Owner's Wireless charging tray, see Owner's Manual Handbook for Navigation, Entertainment, for Navigation, Entertainment, Communi- Communication 8 cation 8 Wood, care 309 W Word match concept, navigation 42 Wrench 287 Warning and indicator lights, see Check Control 138 Warning displays, see Check Control 138 Warning messages, see Check Control 138 Warning triangle 298 Warranty 10 Washer fluid 126 Washer nozzles, windshield 122, 125 Washing the vehicle 306 Water on roads 239 Weights 315 Welcome lights 158 Welcome lights during unlocking 71 Wheel cleaner 308 Wheels, changing 263 Wheels, everything on wheels and tires 256 Wheels, Flat Tire Monitor FTM 172 Wheels, Tire Pressure Monitor TPM 167 Window defroster, rear 211, 215 Windows, powered 89 Windshield cleaning system 120, 123 Windshield defroster 211, 215 Windshield washer fluid 126 Windshield washer nozzles 122, 125

329 Online Edition for Part no. 01402723835 - VI/18 01402723835 ue *BL272383500A* California Proposition 65 Warning

Online Version für Sach-Nr. 0140 - II/19 MINI MOTORER'S GUIDE APP.

Your customized information about the vehicle in an app. Optimized for smartphones & tablets. Can be used offline.

01402723835 ue *BL272383500A*

Online Edition for Part no. 01402723835 - VI/18