DOCSLIB.ORG

Bluetooth Connections

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Bluetooth Connections 9236240 Issue 1 EN Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation Nokia 9300 Using your device as a modem Legal Notice Under no circumstances shall Nokia be responsible for any loss of data or income or Copyright © Nokia 2004. All rights reserved. any special, incidental, consequential or indirect damages howsoever caused. Reproduction, transfer, distribution or storage of part or all of the contents in this The contents of this document are provided "as is". Except as required by applicable document in any form without the prior written permission of Nokia is prohibited. law, no warranties of any kind, either express or implied, including, but not limited Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. to, the implied warranties of merchantability and fitness for a particular purpose, are Other product and company names mentioned herein may be trademarks or trade made in relation to the accuracy, reliability or contents of this document. Nokia names of their respective owners. reserves the right to revise this document or withdraw it at any time without prior notice. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Copyright to the Windows screenshots belongs to Microsoft. Copyright © 2004 Nokia. All rights reserved. Contents Introduction............................................... 4 Contents Bluetooth connection ............................... 5 Pairing your computer and device....................................5 Installing your device as a modem using Bluetooth connectivity ........................................................6 Establishing a modem connection through Bluetooth technology...........................................................9 Data cable connection............................ 12 Installing the cable modem..............................................12 Establishing a connection with a data cable ..............12 Infrared connection ................................ 17 Activating the infrared modem.......................................17 Establishing an infrared connection ..............................17 Adjusting the connection speed ............ 22 Troubleshooting....................................... 23 Bluetooth connections.......................................................23 Data cable connections .....................................................23 Infrared connections...........................................................24 Copyright © 2004 Nokia. All rights reserved. Introduction This document shows how you can install and use your Nokia 9300 as a modem through a Bluetooth, data cable, and infrared connection. Introduction To use any of the connections described in this document, you need a valid account with a network operator or an Internet service provider. 4 Copyright © 2004 Nokia. All rights reserved. Bluetooth connection If your computer includes a compatible Bluetooth adapter, To pair your computer with your device: you can connect your Nokia 9300 to your computer 1 Activate a Bluetooth connection on your computer. For through a Bluetooth connection and use your device as a details, refer to your Bluetooth connectivity modem through the Bluetooth connection. documentation. Before you can use your device as a modem through the 2 Activate a Bluetooth connection on your Nokia 9300 Bluetooth connection, you must install the correct modem by pressing Chr+. driver (inf file) on your computer. Download the latest 3 Make sure that your Nokia 9300 is visible to all other version from the Nokia site at www.nokia.com and copy devices with Bluetooth connectivity: connection Bluetooth the file to the inf folder of your Windows installation • Press Desk, and select Tools→ Control panel→ directory (for example, C:\WINNT\inf). If you have installed Connections→ Bluetooth. Nokia PC Suite on your computer, you do not need to • On the Settings tab, check that the value of the My download the modem driver separately, as it is included in telephone’s visibility field is Shown to all. Nokia PC Suite and copied automatically to the correct folder. This document only describes one way of creating Bluetooth connections on the computer. Depending on the Bluetooth software installed on your computer, creating a Bluetooth connection from your computer to your Nokia 9300 may be different from the way described in this 4 To open the Paired devices tab, press Menu. document. 5 Press New. The device searches for all available devices with Bluetooth connectivity and displays a list of Pairing your computer and device found devices. Before your Nokia 9300 and your computer can communicate, they need to be paired with each other. Copyright © 2004 Nokia. All rights reserved. 5 6 Select your computer from the Devices found list, and Installing your device as a modem press Pair. using Bluetooth connectivity Once your computer and device have been paired, you can install your Nokia 9300 as a modem. You can do this by using the Install a New Modem wizard in your Windows. To install your device as a modem using Bluetooth connectivity: 7 Enter a passcode that is used for all connections 1 Activate a Bluetooth connection on your computer and Bluetooth connection Bluetooth between the devices, and click OK. on your Nokia 9300. 8 When prompted, enter the same passcode on your computer. 9 Your devices are now paired and can communicate with each other using the shared passcode. 6 Copyright © 2004 Nokia. All rights reserved. 2 On your computer, select Start→ Settings→ Control 4 Select the Don’t detect my modem; I will select it Panel, and double-click Phone and Modem Options. from a list option, and click Next. Bluetooth connection Bluetooth 3 To start the Windows Install New Modem wizard, click Add. Copyright © 2004 Nokia. All rights reserved. 7 5 In the Manufacturers list, select Nokia, then select 8 Select the port that you want to use for the Bluetooth Nokia 9300 Bluetooth. modem connection, and click Next. Bluetooth connection Bluetooth 6 Click Next. 7 When prompted, accept the connection on your device by pressing Accept. 8 Copyright © 2004 Nokia. All rights reserved. 9 When Windows has finished installing the modem, 10 A correctly installed modem is listed on the Windows click Finish. Phone and Modem Options, Modems tab. Bluetooth connection Bluetooth Establishing a modem connection through Bluetooth technology Once you have installed your device as a modem using Bluetooth connectivity, you can establish a modem connection through a Bluetooth connection. Copyright © 2004 Nokia. All rights reserved. 9 To establish a modem connection through a Bluetooth Tip: You can authorize connections between connection: paired devices so that you are not prompted to 1 Activate a Bluetooth connection on your computer accept a connection. Select the device from and on your Nokia 9300. You do not need to create a the Paired devices tab, press Edit, and change connection between the devices. the value of the Device authorised field to Yes. 2 On your computer, right-click the Bluetooth icon on 5 In Connect BluetoothConnection, enter your user the system tray, and select Quick Connect→ Dial-up name and password and the phone number received Networking→ Find Devices. from your network operator or Internet service 3 In Dial-Up Networking, select your device from the provider, and click Dial. list, and click Connect. Bluetooth connection Bluetooth 4 On your device, accept the connection when prompted 6 Wait for the connection to be established. Once the by pressing Accept. connection is established, you can use it as any other modem connection. For consecutive connections, you can establish the connection from the My Bluetooth Places folder or from 10 Copyright © 2004 Nokia. All rights reserved. the Bluetooth system tray icon Quick Connect→ Dial-up Networking menu. There is no need to pair the devices or install the modem again. Bluetooth connection Bluetooth Copyright © 2004 Nokia. All rights reserved. 11 Data cable connection When you connect your Nokia 9300 to a compatible PC during the process, click Yes to continue, and let with a DKU-2 data cable, you can use your device as a Windows finish the installation. modem. Before you can use the data cable, you must 2 On your computer, select Start→ Settings→ Control install the Nokia Connectivity Cable driver on your Panel→ Phone and Modem Options, and check that computer. Download the latest version from the Nokia the Modems tab includes your device (Nokia 9300 site at www.nokia.com and install the driver according to USB). the installation instructions before you connect your computer and Nokia 9300 with a data cable. Data connection cable Establishing a connection with a Note: If you have installed Nokia PC Suite 6.4 on your computer, you do not need to install data cable the Nokia Connectivity Cable driver, as it is Once you have installed your device as a cable modem, you installed with Nokia PC Suite 6.4. However, can establish a modem connection through the data cable. make sure you install Nokia PC Suite before you connect your computer and Nokia 9300 with a data cable. Installing the cable modem Once you have installed the Nokia Connectivity Cable driver, you can install your Nokia 9300 as a cable modem. To install your device as a cable modem: 1 Connect your computer and your Nokia 9300 with a DKU-2 data cable. Windows locates the data cable driver automatically. If the
Load more

Recommended publications
  • Components Selection Guide for Bluetooth® Low Energy
    Application Guide Components Selection Guide for Bluetooth® Low Energy Optimize designs, reduce time to market Ceramic Capacitors RF Inductors Power Inductors Timing Devices Bluetooth® Low Energy (BLE) is the next generation Bluetooth® release since version 4.0. Its low power consumption feature makes the BLE a popular choice across many applications. Knowledge of selecting the appropriate peripheral components greatly reduces design time and improves efficiency. System on Chip Power Inductor Battery DC/DC Antenna (Li/Coin Battery) Converter Wireless Ceramic Processor Communication Capacitor Memory (2.4GHz) RF Inductor Timing Devices Sensor Block diagram / Peripheral components Market / applications • IoT devices: Beacon, sensing device with wireless communication • Healthcare: Medical IoT devices, insulin pen, continuous glucose monitoring (CGM), medical tester, portable and personal devices • Industrial: Factory automation (FA), item tracking, monitoring Content Ceramic capacitors .................................. 3 Crystal units ............................................... 7 Ceramic capacitors .................................. 4 MEMS resonators ..................................... 8 RF inductors ............................................... 5 Design tools ................................................ 9 Power inductors ........................................ 6 Global locations ..................................... 10 2 Contents are subject to change without notice. © November 2020 Murata Manufacturing Co., Ltd. • BLE Component
    [Show full text]
  • Glossary of Terminology
    Glossary of Broadband Terminology This glossary was compiled by Ray Elseth of Broadband Development 3 (http://www.bbd3.com) and Thomas Asp of Virchow Krause (http://virchowkrause.com), and is a supplement to “Broadband Access: The Local Government Role” by Thomas Asp, Harvey L. Reiter, Jerry Schulz, and Ronald L. Vaden (IQ Report 36, no. 2 [Washington, D.C.: ICMA, 2004]). 802.11 A family of specifications covering wireless connectivity between devices normally located within 100’ to 300’ of each other. Often referred to as Wireless Local Area Network (WLAN). Most common implementation is 802.11b (see Wi- Fi), but 802.11a and 802.11g are also in active use. 802.15 A family of specifications covering wireless connectivity between devices normally located within 10’ to 30’ of each other. Often referred to as Wireless Personal Area Network (WPAN). Implemented as “Bluetooth.” 802.16 A family of specifications covering wireless connectivity between devices normally located within 1 to 30 miles of each other. Often referred to as Wireless Metropolitan Area Network (WMAN). Access Point (AP) A hardware device that acts as a connectivity hub to permit users of a wireless device to connect to a wired local area network. Provides a bridge between Ethernet wired LANs (local area networks) and the wireless network. Access points are the connectivity point between Ethernet wired networks and devices equipped with a wireless LAN adapter card. Antenna The equipment that allows the transmission or reception of radio frequency energy. Asynchronous Digital A technology that allows high-speed data to be sent over a Subscriber Line single pair of existing copper telephone lines, with data rates (ADSL) for receiving data differing from data rates for sending data.
    [Show full text]
  • QUESTION 20-1/2 Examination of Access Technologies for Broadband Communications
    International Telecommunication Union QUESTION 20-1/2 Examination of access technologies for broadband communications ITU-D STUDY GROUP 2 3rd STUDY PERIOD (2002-2006) Report on broadband access technologies eport on broadband access technologies QUESTION 20-1/2 R International Telecommunication Union ITU-D THE STUDY GROUPS OF ITU-D The ITU-D Study Groups were set up in accordance with Resolutions 2 of the World Tele- communication Development Conference (WTDC) held in Buenos Aires, Argentina, in 1994. For the period 2002-2006, Study Group 1 is entrusted with the study of seven Questions in the field of telecommunication development strategies and policies. Study Group 2 is entrusted with the study of eleven Questions in the field of development and management of telecommunication services and networks. For this period, in order to respond as quickly as possible to the concerns of developing countries, instead of being approved during the WTDC, the output of each Question is published as and when it is ready. For further information: Please contact Ms Alessandra PILERI Telecommunication Development Bureau (BDT) ITU Place des Nations CH-1211 GENEVA 20 Switzerland Telephone: +41 22 730 6698 Fax: +41 22 730 5484 E-mail: [email protected] Free download: www.itu.int/ITU-D/study_groups/index.html Electronic Bookshop of ITU: www.itu.int/publications © ITU 2006 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. International Telecommunication Union QUESTION 20-1/2 Examination of access technologies for broadband communications ITU-D STUDY GROUP 2 3rd STUDY PERIOD (2002-2006) Report on broadband access technologies DISCLAIMER This report has been prepared by many volunteers from different Administrations and companies.
    [Show full text]
  • Internet Connection Sharing Quick Setup Guide
    Internet Connection Sharing with your Pocket PC over Bluetooth, by Belkin Internet Connection Sharing Quick Setup Guide For HP IPAQ Pocket PC Models: H1940, H1945, H2210, H2215, H5450, H5455, H5550, H5555 also works with other Pocket PCs using Widcomm BTCE ver.1.3.x Use with Belkin Bluetooth PC Adapters: F8T001, F8T002 and F8T003 Internet Connection Sharing with your Pocket PC over Bluetooth, by Belkin Note: Please be sure to enable Internet Connection Sharing on your Windows PC before you begin this guide. Please refer to your Windows Help for more information on Internet Connection Sharing. SECTION 1: Pairing your Pocket PC to your Computer Step 1: Tap on the Bluetooth icon located in the lower right corner of the Today Screen. Select Bluetooth Manager. Note: Be sure that your Bluetooth Radio is turned ON. Step 2: Tap on the Tools located in the menu bar located at the bottom of your screen. Then select Paired Devices. Internet Connection Sharing with your Pocket PC over Bluetooth, by Belkin Step 3: Tap on the Add button. Step 4: Tap on Search icon located to the right of the Device text box. This will begin a search for all Bluetooth devices in your area. Internet Connection Sharing with your Pocket PC over Bluetooth, by Belkin Step 5: Tap on the devices you would like to establish a connection for your Pocket PC. Step 6: Enter a Passkey in the Passkey Text Box and tap “OK”. For example “0000” or “1234.” The passkey could be any alphanumeric number you want. Internet Connection Sharing with your Pocket PC over Bluetooth, by Belkin Step 7: Check your Computer.
    [Show full text]
  • Iot Systems Overview
    IoT systems overview CoE Training on Traffic engineering and advanced wireless network planning Sami TABBANE 30 September -03 October 2019 Bangkok, Thailand 1 Objectives •Present the different IoT systems and their classifications 2 Summary I. Introduction II. IoT Technologies A. Fixed & Short Range B. Long Range technologies 1. Non 3GPP Standards (LPWAN) 2. 3GPP Standards IoT Specificities versus Cellular IoT communications are or should be: Low cost , Low power , Long battery duration , High number of connections , Low bitrate , Long range , Low processing capacity , Low storage capacity , Small size devices , Relaxed latency , Simple network architecture and protocols . IoT Main Characteristics Low power , Low cost (network and end devices), Short range (first type of technologies) or Long range (second type of technologies), Low bit rate (≠ broadband!), Long battery duration (years), Located in any area (deep indoor, desert, urban areas, moving vehicles …) Low cost 3GPP Rel.8 Cost 75% 3GPP Rel.8 CAT-4 20% 3GPP Rel.13 CAT-1 10% 3GPP Rel.13 CAT-M1 NB IoT Complexity Extended coverage +20dB +15 dB GPRS CAT-M1 NB-IoT IoT Specificities IoT Specificities and Impacts on Network planning and design Characteristics Impact • High sensitivity (Gateways and end-devices with a typical sensitivity around -150 dBm/-125 dBm with Bluetooth/-95 dBm in 2G/3G/4G) Low power and • Low frequencies strong signal penetration Wide Range • Narrow band carriers far greater range of reception • +14 dBm (ETSI in Europe) with the exception of the G3 band with +27 dBm, +30 dBm but for most devices +20 dBm is sufficient (USA) • Low gateways cost Low deployment • Wide range Extended coverage + strong signal penetration and Operational (deep indoor, Rural) Costs • Low numbers of gateways Link budget: UL: 155 dB (or better), DL: Link budget: 153 dB (or better) • Low Power Long Battery life • Idle mode most of the time.
    [Show full text]
  • State of the Art in LP-WAN Solutions for Industrial Iot Services
    sensors Review State of the Art in LP-WAN Solutions for Industrial IoT Services Ramon Sanchez-Iborra * and Maria-Dolores Cano Departamento de Tecnologías de la Información y las Comunicaciones, Universidad Politécnica de Cartagena, Cartagena 30202, Spain; [email protected] * Correspondence: [email protected]; Tel.: +34-968-325-953 Academic Editor: Gonzalo Pajares Martinsanz Received: 25 February 2016; Accepted: 9 May 2016; Published: 17 May 2016 Abstract: The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN), is explored. By means of a cellular-type architecture, LP-WAN–based solutions aim at fulfilling the reliability and efficiency challenges posed by long-term industrial networks. Thus, the most prominent LP-WAN solutions are reviewed, identifying and discussing the pros and cons of each of them. The focus is also on examining the current deployment state of these platforms in Spain. Although LP-WAN systems are at early stages of development, they represent a promising alternative for boosting future industrial IIoT (Industrial Internet of Things) networks and services. Keywords: Low-Power Wide Area Networks (LP-WAN); Machine-to-Machine (M2M) communications; Industrial Internet of Things (IIoT); Internet of Things (IoT); wireless sensor networks 1. Introduction Machine-to-Machine (M2M) networks and Industrial Internet of Things (IIoT) services are two key enabling approaches for future industrial networking [1].
    [Show full text]
  • Long-Range Wireless Radio Technologies: a Survey
    future internet Review Long-Range Wireless Radio Technologies: A Survey Brandon Foubert * and Nathalie Mitton Inria Lille - Nord Europe, 59650 Villeneuve d’Ascq, France; [email protected] * Correspondence: [email protected] Received: 19 December 2019; Accepted: 11 January 2020; Published: 14 January 2020 Abstract: Wireless networks are now a part of the everyday life of many people and are used for many applications. Recently, new technologies that enable low-power and long-range communications have emerged. These technologies, in opposition to more traditional communication technologies rather defined as "short range", allow kilometer-wide wireless communications. Long-range technologies are used to form Low-Power Wide-Area Networks (LPWAN). Many LPWAN technologies are available, and they offer different performances, business models etc., answering different applications’ needs. This makes it hard to find the right tool for a specific use case. In this article, we present a survey about the long-range technologies available presently as well as the technical characteristics they offer. Then we propose a discussion about the energy consumption of each alternative and which one may be most adapted depending on the use case requirements and expectations, as well as guidelines to choose the best suited technology. Keywords: long-range; wireless; IoT; LPWAN; mobile; cellular; LoRa; Sigfox; LTE-M; NB-IoT 1. Introduction Wireless radio technologies, such as Wi-Fi, are used daily to enable inter-device communications. In the last few years, new kinds of wireless technologies have emerged. In opposition to standard wireless technologies referred to as “short-range”, long-range radio technologies allow devices to communicate over kilometers-wide distances at a low energy cost, but at the expense of a low data rate.
    [Show full text]
  • Comparison of the IEEE 802.11, 802.15.1, 802.15.4 and 802.15.6 Wireless Standards
    Comparison of the IEEE 802.11, 802.15.1, 802.15.4 and 802.15.6 wireless standards Jan Magne Tjensvold∗ September 18, 2007 1 Introduction This paper contains a comparison of some of the wireless standards authored by the Institute of Electrical and Electronics Engineers (IEEE) [1]. It explain some of the differences and similarities between the IEEE 802.11, 802.15.1, 802.15.4 and 802.15.6 wireless standards with an emphasis on the physical layer. 2 Wireless standards The wireless standards that we will investigate in this paper is only a selec- tion from all the standards available. These explanations are not meant to be exhaustive. 2.1 IEEE 802.11 - WLAN/Wi-Fi Wireless LAN (WLAN, also known as Wi-Fi) is a set of low tier, terrestrial, net- work technologies for data communication. The WLAN standards operates on the 2.4 GHz and 5 GHz Industrial, Science and Medical (ISM) frequency bands. It is specified by the IEEE 802.11 standard [2] and it comes in many different variations like IEEE 802.11a/b/g/n. The application of WLAN has been most visible in the consumer market where most portable computers support at least one of the variations. 2.2 IEEE 802.15.1 - Bluetooth The IEEE 802.15.1 standard [3] is the basis for the Bluetooth wireless communi- cation technology. Bluetooth is a low tier, ad hoc, terrestrial, wireless standard for short range communication. It is designed for small and low cost devices with low power consumption. The technology operates with three different classes of devices: Class 1, class 2 and class 3 where the range is about 100 meters, 10 meters and 1 meter respectively.
    [Show full text]
  • User Manual MG7315
    User Manual 8x4 Cable Modem plus N450 Wireless Router MG7315 NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. No part of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form. The manufacturer does not warrant that the hardware will work properly in all environments and applications, and makes no warranty or representation, either expressed or implied, with respect to the quality, performance, merchantability, or fitness for a particular purpose of the software or documentation. The manufacturer reserves the right to make changes to the hardware, software, and documentation without obligation to notify any person or organization of the revision or change. All brand and product names are the trademarks of their respective owners. © Copyright 2016 MTRLC LLC All rights reserved. SAFETY This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. CAUTION: • Do not put the cable modem/router in water. • Do not use the cable modem/router outdoors. • Keep the cable modem/router in an environment that is between 0°C and 40°C (between 32°F and 104°F). • Do not place any object on top of the cable modem/router since this may cause overheating.
    [Show full text]
  • Interference Evaluation of Bluetooth and IEEE 802.11B Systems
    Wireless Networks 9, 201–211, 2003 2003 Kluwer Academic Publishers. Manufactured in The Netherlands. Interference Evaluation of Bluetooth and IEEE 802.11b Systems N. GOLMIE ∗, R.E. VAN DYCK, A. SOLTANIAN, A. TONNERRE and O. RÉBALA National Institute of Standards and Technology, Gaithersburg, MD 20899, USA Abstract. The emergence of several radio technologies, such as Bluetooth and IEEE 802.11, operating in the 2.4 GHz unlicensed ISM frequency band, may lead to signal interference and result in significant performance degradation when devices are colocated in the same environment. The main goal of this paper is to evaluate the effect of mutual interference on the performance of Bluetooth and IEEE 802.11b systems. We develop a simulation framework for modeling interference based on detailed MAC and PHY models. First, we use a simple simulation scenario to highlight the effects of parameters, such as transmission power, offered load, and traffic type. We then turn to more complex scenarios involving multiple Bluetooth piconets and WLAN devices. Keywords: WPANs, Bluetooth, IEEE 802.11b, interference 1. Introduction In addition, there has been several attempts at quantifying the impact of interference on both the WLAN and Bluetooth The proliferation of mobile computing devices including lap- performance. Published results can be classified into at least tops, personal digital assistants (PDAs), and wearable com- three categories depending on whether they rely on analysis, puters has created a demand for wireless personal area net- simulation, or experimental measurements. works (WPANs). WPANs allow closely located devices to Analytical results based on probability of packet colli- share information and resources.
    [Show full text]
  • Bluetooth, WI-FI, Cellular and Wimax 1Omendri Kumari and 2Dr
    IJCSC Volume 5 • Number 2 July-Sept 2014 pp. 61-70 ISSN-0973-7391 Study of Wireless Communication Technologies: Bluetooth, WI-FI, Cellular and WiMAX 1Omendri kumari and 2Dr. Sanjay Kumar 1,2School of Engineering & Technology, Jaipur National University, Jaipur [email protected], [email protected] ABSTRACT A rush forward of research activities in wireless communication has been seen in last decade. There are new points of view on how to communicate effectively over wireless channels from this research drive. The purpose or aim of this paper is to study the basics as well as new research developments. We studied four types of wireless communication technology that are Bluetooth, Cellular, Wi-Fi and WiMAX in this paper. we have described architecture and working of these technologies to understand them easily. we have concluded which one is the best through comparative study and analysis. KEYWORDS: WIRELESS COMMUNICATION, BLUETOOTH, WI-FI, WIMAX, CELLULAR. 1. INTRODUCTION With the rapid development of communication technologies, future wireless communication systems should support voice, data, audio/video, multimedia, interactive games, and Internet traffic. A potential solution for this is to make the wireless communication network and the broadcasting network converge to form a unified convergence network. Wireless communications is, by any measure, the fastest growing segment of the communications industry. [1] As such, it has captured the attention of the media and the imagination of the public. Cellular phones have experienced exponential growth over the last decade, and this growth continues unabated worldwide, with more than a billion worldwide cell phone users projected in the near future.
    [Show full text]
  • Analysis of Bluetooth, Wi-Fi, Zigbee and VLC
    International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (IJAREEIE) | e-ISSN: 2278 – 8875, p-ISSN: 2320 – 3765| www.ijareeie.com | Impact Factor: 7.122| || Volume 9, Issue 6, June 2020 || Analysis of Bluetooth, Wi-Fi, ZigBee and VLC Ambekar Manogna1, Ankita V Bhat2, Bhavana M Patil3, K C Krithika4, H H Surendra5 UG Students, Dept. of ECE, B M S College of Engineering, Bengaluru, Karnataka, India1,2,3,4 Assistant Professor, Dept. of ECE, B M S College of Engineering, Bengaluru, Karnataka, India5 ABSTRACT: Electronic communication is defined as the type of communication which uses electronic media to transmit information or message using computers, e-mail, telephone, video calling, FAX machine, etc. The various technologies which assist in this process are wired communication, Bluetooth, Wi-Fi, ZigBee, and so on. All these technologies use electromagnetic waves which is susceptible to interference and a health hazard for all living things. Moreover, increasing usage of internet demands increase in bandwidth which is a major drawback in case of Wi-Fi. This has led to an alternate solution so called Visible Light Communication (VLC) where transmission of data is carried out using light, hence overcoming the bandwidth restriction, and more secure compared to other technologies. It can be implemented in hospitals, aircrafts, underwater and other places where line of sight communication is possible. KEYWORDS: Visible Light Communication, Bluetooth, ZigBee, Wi-Fi, Wireless communication. I. INTRODUCTION Wireless communication has made our lives easier but it comes with disadvantages as well. A major drawback is the availability of bandwidth. As the usage increases, there is a rising demand for a larger bandwidth which eventually increases traffic and compromises quality.
    [Show full text]