UFC 3-120-10 Interior Design, with Change 2
Total Page:16
File Type:pdf, Size:1020Kb
UFC 3-120-10 16 May 2018 Change 2, 15 June 2021 UNIFIED FACILITIES CRITERIA (UFC) INTERIOR DESIGN APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED UFC 3-120-10 16 May 2018 Change 2, 15 June 2021 UNIFIED FACILITIES CRITERIA (UFC) INTERIOR DESIGN Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder. U.S. ARMY CORPS OF ENGINEERS (Preparing Activity) NAVAL FACILITIES ENGINEERING COMMAND AIR FORCE CIVIL ENGINEER CENTER Record of Changes (changes are indicated by \1\ ... /1) Change No. Date Location 1 20 Apr 2021 1. Updated CAD standard information in paragraph 4-4. 2. Added reference to USACE Nomenclature document in paragraph 4-4.6. 3. Added bulleted item c, link to USACE Nomenclature document, to paragraph 5-3.1.2. 4. Added reference/link to USACE Nomenclature document in Appendix A. 2 15 Jun 2021 1. Added paragraph prohibiting the use of brand names and proprietary information; added bulleted item c; and deleted last subparagraph in paragraph 4-5.1. 2. Added reference to Pantone Color System in paragraph 4-5.1.1. 3. Deleted paragraph 4-5.1.2. 4. Deleted bulleted items d and p, requirements for manufacturer’s contact information and dealer/vendor quotes in paragraph 5-4.7. 5. Deleted paragraph 5-4.9 Manufacturers Source List. This UFC is a revision to UFC 3-120-10 dated 15 June 2006 including Change 1, July 2007. UFC 3-120-10 16 May 2018 Change 2, 15 June 2021 FOREWORD The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense Agencies, and the DoD Field Activities in accordance with USD (AT&L) Memorandum dated 29 May 2002. UFC will be used for all DoD projects and work for other customers where appropriate. All construction outside of the United States is also governed by Status of Forces Agreements (SOFA), Host Nation Funded Construction Agreements (HNFA), and in some instances, Bilateral Infrastructure Agreements (BIA). Therefore, the acquisition team must ensure compliance with the most stringent of the UFC, the SOFA, the HNFA, and the BIA, as applicable. UFC are living documents and will be periodically reviewed, updated, and made available to users as part of the Services’ responsibility for providing technical criteria for military construction. Headquarters, U.S. Army Corps of Engineers (HQUSACE), Naval Facilities Engineering Command (NAVFAC), and Air Force Civil Engineer Center (AFCEC) are responsible for administration of the UFC system. Defense agencies should contact the preparing service for document interpretation and improvements. Technical content of UFC is the responsibility of the cognizant DoD working group. Recommended changes with supporting rationale should be sent to the respective service proponent office by the following electronic form: Criteria Change Request (CCR). The form is also accessible from the Internet sites listed below. UFC are effective upon issuance and are distributed only in electronic media from the following source: • Whole Building Design Guide web site http://www.wbdg.org/. Hard copies of UFC printed from electronic media should be checked against the current electronic version prior to use to ensure that they are current. AUTHORIZED BY: LARRY D. MCCALLISTER, PHD, P.E., JOSEPH E. GOTT, P.E. PMP, SES Chief, Engineering and Construction Chief Engineer Directorate of Civil Works Naval Facilities Engineering Command U.S. Army Corps of Engineers EDWIN H. OSHIBA, SES, MICHAEL McANDREW Deputy Director of Civil Engineers Deputy Assistant Secretary of Defense DCS/Logistics, Engineering & (Facilities Investment and Management) Force Protection Office of the Assistant Secretary of Defense (Energy, Installations, and Environment) UFC 3-120-10 16 May 2018 Change 2, 15 June 2021 UNIFIED FACILITIES CRITERIA (UFC) REVISION SUMMARY SHEET Document: UFC 3-120-10, Interior Design Superseding: • UFC 3-120-10, Interior Design, dated 15 June 2006, including Change 1, July 2007 Description: This UFC is a coordinated compilation of interior design requirements, and references non-government standards to the greatest extent practicable. It provides a succinct reference for interior designers to ensure that all requirements are met. Reasons for Document: • Defines the requirements for interior design work on military construction and renovation projects. • Relies on a list of industry and government standards, codes and references; and • Provides DoD sources for standards and guidance not otherwise addressed. Impact: Cost impacts are negligible; however, design delays should decrease as all requirements for all services are now in a single, consolidated document that has been coordinated with other elements of construction and renovation projects. Unification Issues • Each agency has its own procurement process for Furniture, Fixture & Equipment, as directed by the Departments of the Air Force, Army and Navy; refer to Part 5. • Army and Navy have specific Data Sheet Templates that are required for FF&E procurement; refer to Appendix D. UFC 3-120-10 16 May 2018 Change 2, 15 June 2021 TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ....................................................................................... 1 1-1 PURPOSE AND SCOPE. .......................................................................... 1 1-2 APPLICABILITY. ....................................................................................... 1 1-2.1 Funding. ................................................................................................. 1 1-3 GENERAL BUILDING REQUIREMENTS. ................................................ 2 1-4 REFERENCES. ......................................................................................... 2 1-5 OVERVIEW OF MILITARY INTERIOR DESIGN. ...................................... 2 1-5.1 Structural Interior Design (SID). ............................................................. 2 1-5.2 Furniture, Fixtures and Equipment (FF&E) Design. ............................... 3 1-6 GLOSSARY. .............................................................................................. 3 CHAPTER 2 TECHNICAL REQUIREMENTS ................................................................ 5 2-1 DESIGN REQUIREMENTS. ...................................................................... 5 2-2 INTERIOR DESIGNER QUALIFICATIONS. .............................................. 6 2-3 DESIGN CONSIDERATIONS. ................................................................... 6 2-3.1 Cost Engineering. .................................................................................. 6 2-3.2 Life-Cycle Costs. .................................................................................... 6 2-3.3 Health and Safety Criteria. ..................................................................... 6 2-3.4 Interior Environmental Quality. ............................................................... 7 2-3.5 Wayfinding. ............................................................................................ 7 2-3.6 Sustainable Design. ............................................................................... 7 2-3.7 Overseas Projects. ................................................................................ 7 CHAPTER 3 INTERIOR DESIGN PROCESS ................................................................. 9 3-1 GENERAL. ................................................................................................ 9 3-2 PLANNING AND PROGRAMMING. ......................................................... 9 3-2.1 DD Form 1391. ...................................................................................... 9 3-3 PROJECT DELIVERY PROCESS. ........................................................... 9 3-3.1 Design-Bid-Build (DBB). ........................................................................ 9 3-3.2 Design-Build (DB). ............................................................................... 10 3-4 FURNITURE, FIXTURES AND EQUIPMENT (FF&E) ACQUISITION STRATEGY. .......................................................................................... 10 3-4.1 Contractor Furnished Contractor Installed (CFCI) FF&E Package. ..... 11 i UFC 3-120-10 16 May 2018 Change 2, 15 June 2021 3-4.2 Government Furnished Government Installed (GFGI) FF&E Package. 11 3-4.3 Government Furnished Contractor Installed (GFCI) FF&E Package. .. 12 3-5 DESIGN STAGES. .................................................................................. 12 3-5.1 Schematic Design. ............................................................................... 12 3-5.2 Design Development. .......................................................................... 12 3-5.3 Construction Documents...................................................................... 12 3-5.4 Project Review. .................................................................................... 13 3-6 CONSTRUCTION AND FF&E PACKAGE PROCUREMENT PHASES. 13 3-7 POST OCCUPANCY. .............................................................................. 14 CHAPTER 4 STRUCTURAL INTERIOR DESIGN ........................................................ 15 4-1 GENERAL. .............................................................................................. 15 4-2 SPECIFIC MATERIAL CONSIDERATIONS. .......................................... 15