Kdc-U7053bt Kdc-U7053btl

KDC-U7053BT KDC-U7053BTL

CD-RECEIVER INSTRUCTION MANUAL

12Stepup_B64-4922-00_02_M_en.indd 1 12/01/30 11:08 Contents

Before use 4 Registering a Bluetooth device 22 How to read this manual 5 About registration of a Bluetooth device Simple Bluetooth device registration Function setting procedure Registering a Bluetooth device by operating it Component names 6 Registering a Bluetooth device by operating this unit Audio adjustments 7 Registering a special Bluetooth device Audio control Simple Bluetooth device selection Audio preset memory Selecting the Bluetooth device you wish to Audio preset recall connect Deleting a registered Bluetooth device iPod control operation 9 Bluetooth device registration test Music search Operation for hands-free phoning 25 Alphabet search Related search Receiving a call Direct search Calling a number in the phone book Skip search Dialing a number Skip search ratio setting Calling a number in the call log Playback mode Speed dialing (Preset dial) During a call Music disc/Audio file (CD or USB) Registering in the preset dial number list operation 12 Call waiting Music search Clearing the disconnection message Skip search Making a call by voice dialing Playback mode Display of phone number types (categories) Direct music search Bluetooth audio device operation 28 Tuner operation 14 Before use Auto memory Basic operations Tuner setting Playback mode Direct access tuning Switching between Bluetooth devices Frequency Step Setting Bluetooth setup 29 Display settings 16 Registering the PIN code Selecting a display type Downloading the phone book Selecting a text display Displaying the firmware version Information display setting Bluetooth detail setting Illumination color selection SMS (Short Message Service) 31 Display & Illumination setting Displaying the SMS General operation 19 Downloading the SMS Adjusting the clock SMS reply setting Adjusting the date Return message setting Dual clock display Creating an original message Clock & date display type setting Basic operation of remote control 33 Auxiliary input display setting Demonstration mode setting General control Initial settings On Tuner source On CD/Audio file source On iPod source Hands-free phone control

2 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 2 12/01/30 11:08 Appendix 34 Troubleshooting guide 36 Specifications 38

English | 3

12Stepup_B64-4922-00_02_M_en.indd 3 12/01/30 11:08 Before use

Before using this unit for the first time KDC-U7053BTL When this unit is first turned on, the interactive - Arabic menu appears for setting the interface language and - Persian demonstration mode. Refer to (page 4) of Quick start guide. Refer to “TAG Language” of (page 21). 2 WARNING • The illustrations of the display and panel appearing To prevent injuries or a fire, take the in this manual are examples used to explain more following precautions: clearly how the controls are used. Therefore, what • Stop the car before operating the unit. appears on the display in the illustrations may differ • To prevent a short circuit, never put or leave any from what appears on the display on the actual metallic objects (such as coins or metal tools) inside equipment, and some of the images on the display the unit. may be inapplicable. ¤ CAUTION About the discs used with this unit • Adjust the volume so that you can hear the sound • This unit can only play the CDs with . outside the car. Driving with the volume too high • The following discs cannot be used: may cause an accident. -- A discs that is not round • Wipe off the dirt on the panel with a dry silicon or -- A discs with coloring on the recording surface or a soft cloth. disc that is dirty Failure to observe this precaution may result in -- A recordable/rewritable disc that has not been damage to the monitor or unit. finalized (For the finalization process, refer to the instruction manual that came with your disc Cleaning the connector writing software or your disc recorder.) The unit may not function properly if the connectors -- An 8 cm (3 inch) disc (An attempt to insert using between the unit and faceplate are dirty. Detach the an adapter can cause malfunction.) faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector. Handling discs Connector • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc. • Do not use any solvents to clean discs. Use a dry silicon or soft cloth. • Clean the disc by moving the cloth outward from Condensation the center of the disc. When the car is air-conditioned, moisture may collect • When removing a disc from this unit, pull it out on the laser lens. This may cause disc read errors. In horizontally. this case, remove the disc and wait for the moisture • If the center hole or outside rim of a disc has burrs, to evaporate. remove them before inserting a disc. Notes How to reset your unit • If you experience problems during installation, If the unit fails to operate properly, press the Reset consult your Kenwood dealer. button. The unit returns to factory settings when the • When you purchase optional accessories, check with Reset button is pressed. your Kenwood dealer to make sure that they can Reset button work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed. • To display characters in the following language, additional setting is required. KDC-U7053BT - Chinese Refer to “Chinese” of (page 21).

4 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 4 12/01/30 11:08 How to read this manual

Function setting procedure For the procedure for selecting a setting item in the Function setting mode, see the following example:

Example: Adjusting the contrast of the display 1 Enter the Function setting mode Press and hold the Control knob. “Function” is displayed. 2 Select the Contrast function item

Play Mode Clock&Date Settings DISP&ILLUMI Display Dimmer Initial Settings Contrast Tuner Settings DISP NEGA/POSI

Turn the Control knob to select “Settings”, and then press the Control knob. Next, turn the Control knob to select “DISP&ILLUMI”, and then press the Control knob. Finally, turn the Control knob to select “Contrast”, and then press the Control knob.

In this manual, the above operational procedure is described as follows: 2 Select the Contrast function item Select the following items using the Control knob. “Settings” > “DISP&ILLUMI” > “Contrast”

Press the [ ] button to return to the previous item. 3 Set the Contrast function Turn the Control knob to select a value (1 - 30), and then press the Control knob. The previous item is displayed. 4 Exit the Function setting mode Press and hold the [ ] button.

English | 5

12Stepup_B64-4922-00_02_M_en.indd 5 12/01/30 11:08 Component names

1 2 3 4 5 6

w q p 9 8 7

1 [ ] button 2 Release button 3 [SRC] button 4 Control knob 5 [PRESET] button

6 [0] button 7 USB terminal 8 Auxiliary input 9 [ ] [ ] button p [iPod] button q [DISP] button w [ ] button

6 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 6 12/01/30 11:08 Audio adjustments

Audio control ⁄ You can adjust the following audio control items; • You can set Bass, Middle, and Treble for each source. About Supreme Display Audio setting item Range Technology to extrapolate and supplement with proprietary “SubWoofer Level” Subwoofer level –15 — +15 (dB) algorithm, the high-frequency range that is cut off when “Bass Level” Bass level –8 — +8 (dB) encoding at low bit rate (less than 128Kbps, Sampling “Middle Level” Middle level –8 — +8 (dB) frequency is 44.1kHz). “Treble Level” Treble level –8 — +8 (dB) Supplementing is optimized by compression format (AAC, “Equalizer PRO” MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high “Bass Adjust” bit rate, variable bit rate or has minimal high frequency “Bass Center FRQ” Bass Center Frequency 60/ 80/ 100/ 200 (Hz) range. “Bass Level” Bass level –8 — +8 (dB) “Bass Q Factor” Bass Q Factor 1.00/ 1.25/ 1.50/ 2.00 1 Select the source to adjust “Bass EXT” Bass Extend OFF/ ON Press the [SRC] button. “Middle Adjust” 2 Enter the Audio control mode “Middle Center Middle Center 0.5/ 1.0/ 1.5/ 2.5 (kHz) Press the Control knob. FRQ” Frequency “Middle Level” Middle level –8 — +8 (dB) 3 Select the audio item subject to adjustment “Middle Q Factor” Middle Q Factor 0.75/ 1.00/ 1.25 Turn the Control knob to select the audio item “Treble Adjust” subject to adjustment and then press the “Treble Center Treble Center 10.0/ 12.5/ 15.0/ Control knob. FRQ” Frequency 17.5 kHz Press the [ ] button to return to the previous “Treble Level” Treble level –8 — +8 (dB) item. “Preset Equalizer” Preset Equalizer curve “Rock”/ “Pops”/ “Easy”/ “Top40”/ “Jazz”/ 4 Adjust the value set for the selected audio ”Powerful”/ “Natural”/ item “User”‡ Turn the Control knob to display the value to “Bass Boost” Bass Boost “Level1”/ “Level2”/ adjust, and then press the Control knob. ”Level3”/ “OFF” The previous item is displayed. “Loudness” Loudness “Level1”/ “Level2”/ “OFF” 5 Exit the Audio control mode “Balance” Balance Left 15 — Right 15 Press and hold the [ ] button. “Fader” Fader Rear 15 — Front 15 “SubWoofer” Subwoofer output OFF/ ON “Detailed Settings” “HPF” High Pass Filter Through/ 100/ 120/ 150 (Hz) “LPF SubWoofer” Low Pass Filter 85/ 120/ 160/ Through (Hz) “SubWoofer Subwoofer Phase Reverse (180°)/ Phase” Normal (0°) “Supreme” Supreme setting ON/ OFF “Audio Preset” Audio Preset memory† Recall/ Memory “Volume Offset” Volume offset –8 — ±0 (dB) (AUX: -8 — +8) †Refer to

English | 7

12Stepup_B64-4922-00_02_M_en.indd 7 12/01/30 11:08 Audio adjustments

Audio preset memory Audio preset recall You can register the values set the Audio control You can recall the Audio control items registered to items. the

1 Set the audio control items 1 Select a source Set up the

8 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 8 12/01/30 11:08 iPod control operation

For the basic operations to play iPod contents, refer Alphabet search to the Quick Start Guide. You can select an alphabetic character from the list in the browse item (artist, album, etc.) currently selected.

1 Enter the Music search mode Music search Press the [ ] button. “MUSICSEARCH” is displayed. You can search for the song you want to play. 2 Enter the Search select mode 1 Enter the Music search mode Press the [ ] button. Press the [ ] button. 3 Select the Alphabet search mode “MUSICSEARCH” is displayed. Turn the Control knob to select “Alphabet Search”, 2 Search for a song and then press the Control knob. Operation type Operation 4 Search for characters Movement between items Turn the Control knob. Operation type Operation Move to the Alphabet Press and hold the [ ] button. Refer to Selection of characters Turn the Control knob. search mode (page 9). Determination of the selected characters. Press the Control knob. Selection of item Press the Control knob. Return to previous item Press the [ ] button. Return to the Music search mode. Return to Top menu Push and hold the Control knob leftward. Canceling the Alphabet search mode Press and hold the [ ] button. Canceling the Music search mode ⁄ Press and hold the [ ] button. • Turning the Control knob fast in the Music search mode ⁄ allows you to enter the alphabet search mode. • If no characters included in a song name can be displayed, • The time of Alphabet search may become long depending the browse item name and digits are displayed. on the number of items (songs) in iPod. Items Display Items Display • To search for a character other than A to Z and 1, enter “*”. • If the first character string begins with an article “a”, “an”, Playlists “PLIST***” Podcasts “PDCT***” or “the” in the alphabet search mode, it is searched for in Artists “ART***” Genres “GEN***” defiance of the article. Albums “ALB***” Composers “COM***” Songs “PRGM***”

English | 9

12Stepup_B64-4922-00_02_M_en.indd 9 12/01/30 11:08 iPod control operation

Related search 4 Select a browse item Turn the Control knob to select browse item, You can browse for music of the same artist or and then press the Control knob. genre as the one being played. Display Browse item 1 Enter the Search select mode “PLAYLISTS” Playlists Press and hold the [ ] button. “ARTISTS” Artists “ALBUMS” Albums 2 Select the Related search mode “SONGS” Songs Turn the Control knob to select “Related “PODCASTS” Podcasts Search”, and then press the Control knob. “GENRES” Genres 3 Select a desired brows item “COMPOSERS” Composers Turn the Control knob to select a browse item, and then press the Control knob. 5 Select the character(s) to be searched for Turn the Control knob to select a character(s), Display Browse item and then press the Control knob. “Search Artist” Displays the album of the same artist. You can select up to three characters. “Search Album” Displays music in the album in which the one being played is included. 6 Search for music “Search Genre” Displays the artist of the same genre. Turn the Control knob to select “DONE”, and “Search Composer” Displays the album including music created by the then press the Control knob. same composer. A search result list is displayed. 4 Search for music 7 Select the music Turn the Control knob to select music, and then Operation type Operation Movement between items Turn the Control knob. press the Control knob. Selection of item Press the Control knob. Canceling the Direct search mode Return to previous item Press the [ ] button. Press and hold the [ ] button. Canceling the Related search mode Press and hold the [ ] button. ⁄ Skip search • Related search cannot be performed during Podcast You can search for a song by skipping songs at the playback. set skip search ratio (the ratio of the number of • When the music being played has no information on songs to skip to the total number of songs in the the browse item or no music was found, “Not Found” is selected list) displayed. 1 Enter the Music search mode Press the [ ] button. “MUSICSEARCH” is displayed. Direct search 2 Enter the Search select mode You can search for music by selecting a browse item Press the [ ] button. and an alphabetic character(s). 3 Select Skip search mode 1 Enter the Music search mode Turn the Control knob to select “Skip Search”, Press the [ ] button. and then press the Control knob. “MUSICSEARCH” is displayed. Search for music 2 Enter the Search select mode Operation type Operation Press the [ ] button. Movement between items Turn the Control knob. Skip Search Push the Control knob upward or 3 Select Direct search mode downward. Turn the Control knob to select “Direct Search”, Selection of item Press the Control knob. and then press the Control knob. Setting of skip search ratio Push the Control knob rightward or leftward. 10 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 10 12/01/30 11:08 Canceling the Music search mode Playback mode Press and hold the [ ] button. You can select a Play Mode, such as Random play ⁄ and Repeat play. • The skip search ratio is set to 0.5% as default. Refer to (page 11). 1 Select the iPod source • Press and hold the Control knob to skip songs at 10% Press the [SRC] button. regardless of the setting. Select the “iPod” display. 2 Enter the Function setting mode Press and hold the Control knob. Skip search ratio setting 3 Select the Play mode You can change the ratio of skip performed as Turn the Control knob to select “Play Mode”, mentioned in (page 10). and then press the Control knob.

1 Select the iPod source 4 Select a desired playback function Press the [SRC] button. Turn the Control knob to select playback Select the “iPod” display. function, and then press the Control knob. Display Description 2 Enter the Function setting mode “Play Mode” Press and hold the Control knob. “APP & iPod When set to “ON”, allows you to operate the iPod 3 Select the Skip search ratio item Mode” with the control on the iPod. Select the following items using the Control “ON” / “OFF” knob. “Folder Random” When set to “ON”, plays the songs in the folder “Settings” > “Skip Search” randomly. (Music only) “ON” / “OFF” 4 Set a Skip search ratio “All Random” When set to “ON”, plays all songs in the iPod Turn the Control knob to select a ratio (“0.5%”, randomly. (Music only) “1%”, “5%”, or “10%”), and then press the “ON” / “OFF” Control knob. “File Repeat” When set to “ON”, plays the song repeatedly. “ON” / “OFF” 5 Exit the Function setting mode ( : Factory setting) Press and hold the [ ] button. 5 Determine the selection Press the Control knob. The previous item is displayed. 6 Exit the Function setting mode Press and hold the [ ] button. ⁄ • When “APP & iPod Mode” is set to “ON”, this unit can control only the “Pause and play”, “Selecting a song”, and “Fast Forward or Fast Backward of the Song” functions.

English | 11

12Stepup_B64-4922-00_02_M_en.indd 11 12/01/30 11:08 Music disc/Audio file (CD or USB) operation

For the basic operations to play Music disc/Audio Music Editor media file contents, refer to the Quick Start Guide. Skip search You can search for a song by skipping songs at the set skip search ratio (the ratio of the number of songs to skip to the total number of songs in the Music search selected list). You can select the music you want to listen to from the device or media being played now. 1 Enter the Music search mode Press the [ ] button. 1 Enter the Music search mode “MUSICSEARCH” is displayed. Press the [ ] button. 2 Enter the Search select mode “MUSICSEARCH” is displayed. Press the [ ] button. 2 Search for music 3 Select the Skip search mode Audio file Turn the Control knob to select “Skip Search”, and then press the Control knob. Operation type Operation Movement between Turn the Control knob. 4 Search for music folders/files Operation type Operation Selection of folder/file Press the Control knob. Movement between items Turn the Control knob. Return to previous folder Press the [ ] button. Skip search Push the Control knob upward or Return to root folder Push and hold the Control knob leftward. downward. Cancellation of Music Press and hold the [ ] button. Selection of item Press the Control knob. search mode Setting of skip search ratio Push the Control knob rightward or ¡ indicator: Audio file leftward. ] indicator: Folder Canceling the Music search mode CD source Press and hold the [ ] button. Operation type Operation ⁄ Movement between track Turn the Control knob. • The ratio of the Skip Search is set to 0.5% as default. Refer to Selection of track Press the Control knob. (page 11). Return to first track Push and hold the Control knob leftward. • Press and hold the Control knob to skip songs at 10% Cancellation of Music Press the [ ] button. regardless of the setting. search mode

12 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 12 12/01/30 11:08 Playback mode Function of remote control You can select a playback mode, such as Random Direct music search play and Repeat play. You can search for music by entering the track number. 1 Select the CD/ USB source Press the [SRC] button. 1 Enter the Direct Music search mode Select the “CD” or “USB” display. Press the [DIRECT] button on the remote 2 Enter the Function setting mode control. Press and hold the Control knob. “– –” is displayed. 3 Select the Playback function mode 2 Enter the music number Turn the Control knob to select “Play Mode”, Press the number buttons on the remote and then press the Control knob. control. 4 Select a desired playback mode 3 Search for music Turn the Control knob to select playback mode, Press the [4] or [¢] button on the remote and then press the Control knob. control. Display Description Canceling the Direct music mode “Play Mode” Press the [ ] button on the remote control. “Track Scan” (CD)/ When set to “ON”, plays the intros of the songs “File Scan” (Audio in the CD/folder successively. file) “ON” / “OFF” “Disc Random” (CD)/ When set to “ON”, plays the songs in the folder “Folder Random” randomly. (Audio file) “ON” / “OFF” “All Random” (Audio When set to “ON”, plays all songs in the disc/ file) USB randomly. “ON” / “OFF” “Track Repeat” (CD)/ When set to “ON”, plays the selected song “File Repeat” (Audio repeatedly. file) “ON” / “OFF” “Folder Repeat” When set to “ON”, plays the songs in the folder (Audio file) repeatedly. “ON” / “OFF” ( : Factory setting) 5 Exit the Function setting mode Press and hold the [ ] button.

English | 13

12Stepup_B64-4922-00_02_M_en.indd 13 12/01/30 11:08 Tuner operation

For the basic operations to listen to the radio, refer Tuner setting to the Quick Start Guide. You can set up the tuner.

1 Select the Tuner source Press the [SRC] button. Auto memory Select the “TUNER” display. You can register 18 (FM)/ 6 (AM) stations with good 2 Enter the Function setting mode reception automatically. Press and hold the Control knob.

1 Select the Tuner source 3 Select the Settings item Press the [SRC] button. Turn the Control knob to select “Settings”, and Select the “TUNER” display. then press the Control knob. 2 Enter the Function setting mode 4 Select a desired Tuner setting item Press and hold the Control knob. Turn the Control knob to select Tuner setting item, and then press the Control knob. 3 Select the Auto memory function item Select the following items using the Control Display Description knob. “Settings” “Settings” > “Auto Memory” “Seek Mode” Sets the tuning mode of the Radio. Auto1: Automatic search for a station. 4 Start storing stations in the Auto memory Auto2: Search in order of the stations in the mode preset memory. Turn the Control knob to select “YES”, and then Manual: Normal manual tuning. “MONO” You can reduce the noise when stereo press the Control knob. broadcasts are received as monaural. When 18 (FM)/ 6 (AM) stations that can be received “ON” / “OFF” are stored in the memory, the process in this mode ( : Factory setting) is completed. 5 Select a setting and determine it Turn the Control knob to select a desired value, and then press the Control knob. The previous item is displayed. 6 Exit the Function setting mode Press and hold the [ ] button.

14 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 14 12/01/30 11:08 Function of remote control Frequency Step Setting Direct access tuning Changing the tuning frequency step. You can search for a station directly by entering The original setting is FM band 50 kHz, and AM frequency. band 9 kHz.

1 Enter the Direct access tuning mode 1 Turn the power OFF Press the [DIRECT] button on the remote Press and hold the [SRC] button. control. 2 Switch the frequency step “– – – –” is displayed. While pressing the [PRESET] button and [ ] 2 Enter the frequency button, press the [SRC] button. Press the number buttons on the remote Release your fingers from the button after the control. display appears. Example: The frequency step changes to FM band 200 kHz, Desired frequency Press the following buttons and AM band 10 kHz. 92.1 MHz (FM) [9], [2], [1] ⁄ 810 kHz (AM) [8], [1], [0] • When the same operation is repeated, the frequency step returns to the original setting. 3 Search for frequency • When the frequency step is changed, the frequencies in the Press the [4] or [¢] button on the remote memory are deleted. control. Canceling Direct access mode Press the [ ] button on the remote control.

English | 15

12Stepup_B64-4922-00_02_M_en.indd 15 12/01/30 11:08 Display settings

Selecting a display type On Tuner source Information Display Shown below are examples of display types. Frequency “Frequency” Display type Display information Clock “Clock” Type A Displays 3 lines of text. Date “Date” Type B Displays 2 line of text. Blank “Blank” Type C Displays the clock. Type D Displays the Motion graphics. On Bluetooth Audio source Type E Turn off the display. (5 seconds after completion of Information Display operation) Source name “Source Name” Song title* “Song Title“ 1 Enter the Function setting mode Album name* “Album Name” Press and hold the Control knob. Artist name* “Artist Name” 2 Select the Display type select item Song title and Artist name** “Title/Artist” Select the following items using the Control Album name and Artist name** “Album/Artist” Clock “Clock” knob. Date “Date” “Settings” > “DISP&ILLUMI” > “Display Select” > Blank “Blank” “Type Select” 3 Select the display type On Standby/ Auxiliary input source Turn the Control knob to select a display type, Information Display and then press the Control knob. Source name (AUX only) “Source Name” Clock “Clock” 4 Exit the Function setting mode Date “Date” Press and hold the [ ] button. Blank “Blank”

*Display type A only **Display type B only Selecting a text display 1 Enter the Function setting mode You can change the information displayed on each Press and hold the Control knob. of the following sources: 2 Select the Text select item On Audio file/ iPod source Select the following items using the Control Information Display knob. Song title* “Song Title“ “Settings” > “DISP&ILLUMI” > “Display Select” > Album name* “Album Name” “Text Select” Artist name* “Artist Name” Title and Artist name** “Title/Artist” 3 Select the text display part Album and Artist name** “Album/Artist” Push the Control knob upward or downward. Folder name “Folder Name” The selected text display part blinks. File name “File Name” 4 Determine the selection Play time “P-Time” Turn the Control knob. Clock “Clock” Date “Date” 5 Exit the Function setting mode Blank “Blank” Press and hold the [ ] button. ⁄ On CD source • If the selected display item does not have any information, Information Display alternative information is displayed. Disc title “Disc Title” • Setting is available when the display type is A or B which Track title “Track Title” allows text display. Refer to Play time “P-Time” (page 16). Clock “Clock” • Some items cannot be selected depending on the display Date “Date” type and row. Blank “Blank” • If you select “Folder name” while playing music on the 16 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 16 12/01/30 11:08 iPod, names will be displayed depending on the currently Illumination color selection selected browsing items. • If you select the APP & iPod Control mode while playing You can select the illumination color of the panel. music on the iPod, “APP & iPod Mode” is displayed. • If all characters cannot be displayed while music is played 1 Enter the Function setting mode on the iPod, the file number in the list is displayed. Press and hold the Control knob. Information Display 2 Select the Color select item Music title “TITLE***” Select the following items using the Control Folder name “FLD***” knob. File name “FILE***” “Settings” > “DISP&ILLUMI” > “Color Select” 3 Select the part for which you want to set the illumination color Information display setting Display Part You can set the side and graphic parts of the “Color Select” display. “Color SEL All” All “Color SEL Display” Display 1 Enter the Function setting mode “Color SEL Key” Button Press and hold the Control knob. “Color SEL USB&AUX” USB terminal and Auxiliary input 2 Select the Display select item Turn the Control knob to select a part, and then Select the following items using the Control press the Control knob. knob. 4 Select an illumination color “Settings” > “DISP&ILLUMI” > “Display Select” Turn the Control knob to select a color, and 3 Select a desired Information display setting then press the Control knob. item Select the color from “Variable Scan”/ “Color1” — Turn the Control knob to select a display setting “Color24”. item, and then press the Control knob. Adjusting the RGB values Display Description In this step, you can also create your original color “Display Select” during the selection from “Color1” — “Color24”. “Side Select” Sets the side part display for Type A, B, and D. The color you created can be called by selecting 1 / 2 / 3 (Type A, B only) “User”. “Graphic Select” Sets the Type C clock display. 1. Press and hold the Control knob. 1 / 2 Enter the Detail color adjustment mode. “Status” Sets the status display (ON/OFF indicator for 2. Set the color. each function) for Type A and B. “ON” / “OFF” Operation type Operation ( : Factory setting) To select the color to adjust Push the Control knob rightward or (Red, Green, or Blue) leftward. 4 Select a setting and determine it To adjust color. Turn the Control knob. Turn the Control knob to select a desired (Range: 0 – 9) setting, and then press the Control knob. 3. Press the Control knob. The previous item is displayed. Exit the detail color adjustment mode. 5 Exit the Function setting mode 5 Exit the Function setting mode Press and hold the [ ] button. Press and hold the [ ] button.

English | 17

12Stepup_B64-4922-00_02_M_en.indd 17 12/01/30 11:08 Display settings

Display & Illumination setting “ILLUMI Dimmer” Reduces the key Illumination brightness. “Auto”: Dims the illumination in conjunction You can set the display and illumination. with the Light switch of the vehicle. “Manual1”: Dims the illumination constantly. 1 Enter the Function setting mode “Manual2”: Dims the illumination darker than Press and hold the Control knob. that in the Manual1 mode. “OFF”: Does not dim the illumination. Select the Display & Illumination setting item 2 “ILLUMI Effect” Sets whether the key illumination color is Select the following items using the Control changed in conjunction with the key operation. knob. “ON” / “OFF” “Settings” > “DISP&ILLUMI” ( : Factory setting) 3 Select a desired Display & Illumination setting 4 Determine the Display & Illumination setting item Turn the Control knob to select a desired Turn the Control knob to select Display & setting, and then press the Control knob. Illumination setting item, and then press the The previous item is displayed. Control knob. 5 Exit the Function setting mode Display Description Press and hold the [ ] button. “DISP&ILLUMI” “Display Dimmer” Dims the display part in conjunction with the light switch of the vehicle. “Auto”: Dims the display in conjunction with the Light switch of the vehicle. “Manual1”: Dims the display constantly. “Manual2”: Dims the display darker than that in the Manual1 mode. “OFF”: Does not dim the display. “Contrast” Sets the display contrast. “1” – ”10” – “30” “DISP NEGA/POSI” Switches the panel display between positive and negative modes. “NEGA1”: Displays the text in the negative mode. “NEGA2”: When the interior light is off, the text is displayed in the negative mode; when the interior light is on, the text is displayed in the positive mode. “POSI1”: Displays the text in the positive mode. “POSI2”: When the interior light is off, the text is displayed in the positive mode; when the interior light is on, the text is displayed in the negative mode. “Text Scroll” Sets the method of scrolling to view hidden texts. “Auto” : Scrolls. “Once” : Scrolls once. “OFF” : Does not scroll. “BT DVC Status” You can display the connection status, signal strength, and battery level. : Battery level of cell-phone. : Signal strength of cell-phone.

18 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 18 12/01/30 11:08 General operation

Adjusting the clock Dual clock display You can set the time for two different cities. 1 Enter the Function setting mode Press and hold the Control knob. 1 Enter the Function setting mode 2 Select the Clock Adjust item Press and hold the Control knob. Select the following items using the Control 2 Select the City Select item knob. Select the following items using the Control “Settings” > “Clock&Date” > “Clock Adjust” knob. 3 Set the hour “Settings” > “Clock&Date” > “City Select” Turn the Control knob to adjust the hour, and 3 Select the clock display part then press the Control knob. Push the Control knob upward or downward. 4 Set the minute 4 Select home and sub cities Turn the Control knob to adjust the minute, and Turn the Control knob. then press the Control knob. 5 Determine the home and sub cities 5 Exit the Function setting mode Press the Control knob. Press and hold the [ ] button. 6 Exit the Function setting mode ⁄ Press and hold the [ ] button. • For adjustment during summer time, refer to “Summer Time” of (page 20). ⁄ • For adjustment of Home time, refer to (page 19). • The time of the sub city is automatically derived from the Adjusting the date home time. When the summer time system is are different between 1 Enter the Function setting mode home and sub cities, adjustment can be done by referring Press and hold the Control knob. to the description of “Sub Clock Adjust” in (page 20). 2 Select the Date Adjust item Select the following items using the Control knob. “Settings” > “Clock&Date” > “Date Adjust” 3 Set the year Turn the Control knob to adjust the year, and then press the Control knob. 4 Set the month Turn the Control knob to adjust the month, and then press the Control knob. 5 Set the day Turn the Control knob to adjust the day, and then press the Control knob. 6 Exit the Function setting mode Press and hold the [ ] button.

English | 19

12Stepup_B64-4922-00_02_M_en.indd 19 12/01/30 11:08 General operation

Clock & date display type setting Auxiliary input display setting You can set the display type of the clock and You can set the display when switched the AUX calendar. source.

1 Enter the Function setting mode 1 Select the AUX source Press and hold the Control knob. Press the [SRC] button. Select the “AUX” display. 2 Select the Clock & Date setting item Select the following items using the Control 2 Enter the Function setting mode knob. Press and hold the Control knob. “Settings” > “Clock&Date” 3 Select the AUX name set item 3 Select the desired Clock & Date setting item Select the following items using the Control Turn the Control knob to select Clock & Date knob. display setting item, and then press the Control “Settings” > “AUX Name Set” knob. 4 Select the display connected as an AUX source Display Description and determine it “Clock&Date” Turn the Control knob to select the Auxiliary “Summer Time” Advances the clock one hour when set to ON. input display, and then press the Control knob. “ON” / “OFF” Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or “Sub Clock Adjust” Adjusts the time difference caused by summer “ T V ”. time. “-1h” / “0h” / “+1h” 5 Exit the Function setting mode “Date Mode” Sets the date display mode. Press and hold the [ ] button. 7 types ( : Factory setting) 4 Select a setting and determine it Demonstration mode setting Turn the Control knob to select desired setting, and then press the Control knob. You can turn on/off the demonstration mode. The previous item is displayed. 1 Enter the Function setting mode 5 Exit the Function setting mode Press and hold the Control knob. Press and hold the [ ] button. 2 Select the Demonstration mode item Turn the Control knob to select “DEMO Mode”, and then press the Control knob. 3 Select a setting and determine it Turn the Control knob to select a desired setting (“ON” or “OFF”), and then press the Control knob. Exit the Function setting mode.

20 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 20 12/01/30 11:08 Initial settings “CD Read” Sets the method for reading CD. When unable to play a special format CD, set You can configure initial settings of this unit. this setting to “2” to force playing. Note that some music CDs may be unplayable even 1 Select the Standby when set to “2”. Press the [SRC] button. In addition, audio files cannot be played when Select the “STANDBY” display. set to “2”. Normally, keep this set to “1”. 1: Automatically distinguishes between the 2 Enter the Function setting mode audio file disc and music CD when playing Press and hold the Control knob. a disc. 2: Forces playing as a music CD. Select the Initial settings item 3 “Built-in AMP” Selecting “OFF” turns off the built-in amplifier. Turn the Control knob to select “Initial Settings”, Turning off the built-in amplifier improves the and then press the Control knob. quality of the sound from Preout. “ON” / “OFF” 4 Select a desired Initial setting item “Speaker Select” Sets the speaker type so that the System Q Turn the Control knob to select an Initial setting value is optimal. item, and then press the Control knob. “OFF”: OFF Display Description “5/4inch”: For 5 & 4 in. speaker “6x9/6inch”: For 6 & 6x9 in. speaker “Initial Settings” “O.E.M.”: For the OEM speaker “SRC Select” Select “2” to change the source selection “F/W Update” Upgrades the firmware. method. Press the [SRC] button, turn the Selecting “YES” and then pressing the Control Control knob to select the source, and then knob starts upgrading the firmware. press the Control knob to determine it. For how to update the firmware, access our 1 / 2 web site. “Key Beep” Setting the operation check sound (beep http://www.kenwood.com/cs/ce/ sound) ON/OFF. “ON” / “OFF” ( : Factory setting) “TDF Alarm” If you turn off the engine key of the vehicle 5 Select an Initial setting item without removing the panel, a beep sounds Turn the Control knob to select desired setting, for 30 seconds. and then press the Control knob. “ON” / “OFF” The previous item is displayed. “Chinese” When this is set to ON, the following character strings are displayed in Chinese: 6 Exit the Function setting mode Folder name/ File name/ Song title/ Artist Press and hold the [ ] button. name/ Album name (KDC-U7053BT only) “ON” / “OFF” “TAG Language” When this is set to “Arabic”, ”Persian”, or “Thai”, the following character strings are displayed in Arabic, Persian, or Thai: Folder name/ File name/ Song title/ Artist name/ Album name (KDC-U7053BTL only) English / Arabic / Persian / Thai “Function Language” Changes the display language of items displayed in the Function setting mode. (KDC-U7053BTL only) English / Persian “Built-in AUX” Sets whether to display AUX during source selection. “ON” / “OFF”

English | 21

12Stepup_B64-4922-00_02_M_en.indd 21 12/01/30 11:08 Registering a Bluetooth device

About registration of a Bluetooth Registering a Bluetooth device by device operating it If your Bluetooth device is not yet registered, register You can register a Bluetooth device using its (pair) it by referring to (page 22) , (page 22), or (page 22) . Press the [SRC] button. 2 Start registering a unit by operating the ⁄ Bluetooth device • For details on the Bluetooth cell-phone with the hands-free By operating the Bluetooth device, register the function, see (page 35). hands-free unit (pairing). Select “KENWOOD BT • If there are 5 Bluetooth devices registered, you cannot CD/R-6P1” from the list of connected units. register a new Bluetooth device. • When any error code is displayed while the paring is in 3 Enter the PIN code progress, refer to (page 36). Input the PIN code registered as mentioned in (page 29). Check that registration is complete on the Simple Bluetooth device registration Bluetooth device. You can register a Bluetooth device using a simple 4 By operating the Bluetooth device, start procedure. hands-free connection. 1 Enter the Bluetooth mode Press and hold the [ ] button. Registering a Bluetooth device by If your Bluetooth device is not yet registered, search for a Bluetooth device starts with “Searching” operating this unit displayed. You can register a Bluetooth device using the registration function of this unit. Pairing with a new Bluetooth device Turn the Control knob to select “Device Search”, 1 Enter the Bluetooth mode and then press the Control knob. Press the [ ] button. Search for a Bluetooth device starts with “Searching” “BT MODE” is displayed. displayed. 2 Enter the Function setting mode 2 Select the Bluetooth device you wish to Press and hold the Control knob. register Turn the Control knob to select the Bluetooth 3 Select a Bluetooth device registration item device name, and then press the Control knob. Select the following items using the Control knob. 3 Input the PIN code “Settings” > “Pairing” > “Device Registration” Operation type Operation Search for the Bluetooth device. Selection of the numbers Turn the Control knob. When search is completed, “Finished” is displayed. Movement to the next digit Push the Control knob rightward. 4 Select the Bluetooth device you wish to Deletion of the last digit Push the Control knob leftward. register Transmission of PIN code Press the Control knob. Turn the Control knob to select the Bluetooth Pairing completes with “HF Connect” or “Audio device, and then press the Control knob. Connect” displayed. 5 Input the PIN code Operation type Operation Selection of number Turn the Control knob. Movement to the next digit Push the Control knob rightward. Deletion of the last digit Push the Control knob leftward. Transmission of PIN code Press the Control knob.

22 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 22 12/01/30 11:08 If “Pairing Success” is displayed, registration is 1 Enter the Bluetooth mode complete. Press and hold the [ ] button. 6 Return to the device list 2 Select the Bluetooth device you wish to Press the Control knob. connect Turn the Control knob to select the Bluetooth 7 Exit the Bluetooth mode device name, and then press the Control knob. Press the [SRC] button. ⁄ 3 Select a connection profile Turn the Control knob to select Profile, and • This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input then press the Control knob. from the Bluetooth device. Pairing completes with “HF Connect” or “Audio • If the error message appears even though the PIN code Connect” displayed. is correct, try the procedure mentioned in (page 23). (Advanced Audio Distribution Profile) “H“: Bluetooth device registered using HFP (Hands Registering a special Bluetooth device Free Profile). You can register a special device that cannot be registered normally (pairing). Selecting the Bluetooth device you wish to connect 1 Enter the Bluetooth mode Press the [ ] button. When two or more Bluetooth devices have already “BT MODE” is displayed. been registered, you need to select the Bluetooth device you wish to use. 2 Enter the Function setting mode Press and hold the Control knob. 1 Enter the Bluetooth mode Press the [ ] button. 3 Select a Special device registration item “BT MODE” is displayed. Select the following items using the Control knob. 2 Enter the Function setting mode “Settings” > “Pairing” > “SPCL Device Select” Press and hold the Control knob. 4 Select the Bluetooth device you wish to 3 Select a Bluetooth device selection item register Select the following items using the Control Turn the Control knob to select the Bluetooth knob. device, and then press the Control knob. “Settings” > “Pairing” > “Phone Selection” (to If “Completed” is displayed, registration is select the cell-phone) or “Audio Selection” (to completed. select the audio player) “(name)” is displayed. 5 Register the selected Bluetooth device Go through the procedure mentioned in 4 Select a desired Bluetooth device (page 22) Turn the Control knob to select a Bluetooth and complete the registration (pairing). device, and then press the Control knob. ‘✱(name)’ or ‘-(name)’ is displayed. Canceling the Bluetooth mode “✱”: The selected Bluetooth device is busy. Press the [SRC] button. “-”: The selected Bluetooth device is on standby. ⁄ “ “ (blank): The Bluetooth device is deselected. • If the device name is not in the list, select “Other Phones”. 5 Exit the Bluetooth mode Press the [SRC] button. Simple Bluetooth device selection ⁄ If Bluetooth devices have been registered but none • If a cell-phone is already selected, deselect it, and then of them is connected, you can select a Bluetooth select a different one. device using a simple procedure. • If you cannot select a device using the audio player, connect the device with the audio player. English | 23

12Stepup_B64-4922-00_02_M_en.indd 23 12/01/30 11:08 Registering a Bluetooth device

Deleting a registered Bluetooth Bluetooth device registration test device You can check whether a Bluetooth device can be You can delete a registered Bluetooth device. registered by operating this unit.

1 Enter the Bluetooth mode 1 Enter the Bluetooth mode Press the [ ] button. Press and hold the [ ] button. “BT MODE” is displayed. Search for a Bluetooth device starts with “Searching” displayed. 2 Enter the Function setting mode Press and hold the Control knob. 2 Select the Bluetooth device to test Turn the Control knob to select the Bluetooth 3 Select a Bluetooth device deletion item device name. Select the following items using the Control knob. 3 Enter the Connectivity test mode “Settings” > “Pairing” > “Device Delete” Press and hold the Control knob. Device names are displayed. “BT Test Mode” is displayed. 4 Select the Bluetooth device you wish to delete 4 Input the PIN code Turn the Control knob to select a Bluetooth Input the PIN code of Bluetooth device if it has device, and then press the Control knob. been changed from default. 5 Determine the selection Operation type Operation Turn the Control knob to select “YES”, and then Selection of numbers Turn the Control knob. press the Control knob. Movement to the next digit Push the Control knob rightward. “Completed” is displayed. Delete the last digit Push the Control knob leftward. Transmit the PIN code Press the Control knob. 6 Exit the Bluetooth mode When pairing is completed successfully, a Press the [SRC] button. connection test starts automatically. ⁄ When the connection test is completed, test results • When a registered cell-phone is deleted, its phone Book, are displayed on a function basis (“OK”: Enabled; log, and SMS are also deleted. “NG”: Disabled). Display Description “Pairing” Registration in this unit “HF Connect” Hands-free phoning “AUD Connect” Audio playback “PB Download” Phone Book downloading

5 Exit the Connectivity test mode Press the Control knob.

24 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 24 12/01/30 11:08 Operation for hands-free phoning

Receiving a call Dialing a number

You can answer a phone call 1 Enter the Bluetooth mode Press the [ ] button. Press the [ ] button. ⁄ “BT MODE” is displayed. • The following operations disconnect the line: 2 Select the Number dial mode - Inserting a CD. Turn the Control knob to select “Number Dial”, - Connecting a USB device. and then press the Control knob. • The name of the calling party is displayed if it has already been registered in the phone Book. 3 Enter the phone number Turn the Control knob to select a number, and Rejecting an incoming call then push the Control knob rightward. Press the [ ] button. 4 Make a call Press the [ ] button. Calling a number in the phone book To erase the entered phone number digit by digit: 1 Enter the Bluetooth mode Push the Control knob leftward. Press the [ ] button. ⁄ “BT MODE” is displayed. • You can input a maximum of 32 digits. 2 Select the Name search mode Turn the Control knob to select “Phone Book”, and then press the Control knob. Calling a number in the call log 3 Search for a number/name in the phone book 1 Enter the Bluetooth mode Operation type Operation Press the [ ] button. Selection of phone number Turn the Control knob. “BT MODE” is displayed. Selection of name Push the Control knob rightward or leftward. 2 Select the call log mode Selection of initial Push the Control knob upward or Turn the Control knob to select “Incoming downward. Calls”, “Outgoing Calls”, or “Missed Calls”, and Determination of phone Press the Control knob. then press the Control knob. number “Incoming Calls”: Incoming calls 4 Make a call “Outgoing Calls”: Outgoing calls Press the [ ] button. “Missed Calls”: Missed calls ⁄ 3 Select a name or phone number • If the phone book has not yet been downloaded Turn the Control knob. automatically, download it according to (page 29). Press the [ ] button. • Pressing the [DISP] button each time switches between name and phone number. ⁄ • During search, a non-accent character such as “u” is • Pressing the [DISP] button each time switches between the searched for instead of an accent character such as “ü”. name and telephone number. • The outgoing call list, incoming call list, and missed call list, are the lists of calls originated from and received by this unit. They are not the ones stored in the cell-phone memory.

English | 25

12Stepup_B64-4922-00_02_M_en.indd 25 12/01/30 11:08 Operation for hands-free phoning

Speed dialing (Preset dial) Registering in the preset dial number list 1 Enter the Bluetooth mode Press the [ ] button. 1 Enter the phone number you wish to register “BT MODE” is displayed. Enter the phone number with reference to the 2 Select the Preset dial mode following: Turn the Control knob to select “Preset Call”, Dialing a number/ Calling a number in the call log/ and then press the Control knob. Calling a number in the phone book 3 Select the number you want to recall from the 2 Enter the Preset memory mode memory Press the [PRESET] button. Turn the Control knob to select recall number 3 Select a number and store it in the memory (“P1” – “P6”), and then press the Control knob. Turn the Control knob to select memory 4 Make a call number (“P1” – “P6”), and then Press and hold Press the [ ] button. the Control knob. ⁄ Canceling the Preset memory mode • You need to register the preset dial number. Refer to Press the [ ] button. (page 26).

Call waiting During a call Answering another incoming call with the Disconnecting a Call current call suspended Press the [SRC] button. Press the [ ] button. Switching to the Private mode Answering another incoming call after Push the Control knob rightward or leftward. terminating the current call Pressing this knob each time switches between the Press the [SRC] button. private talk mode (“PRIVATE”) and hands-free talk Continuing the current call mode. ⁄ 1 Press the Control knob. • Depending on the type of your cell-phone, switching 2 Turn the Control knob to select “Reject”, and to the private talk mode may select the source that was then press the Control knob. used before commencing the hands-free connection. If Answering the waiting call after terminating this happens, the source cannot be switched back to the hands-free talk mode by operating this unit. Operate your the current call cell-phone to return to the hands-free talk mode. Press the [ ] button. Adjusting the voice volume during a call Switching between the current call and waiting Turn the Control knob. call Press the Control knob. Pressing this knob each time switches between the calling parties.

26 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 26 12/01/30 11:08 Clearing the disconnection message Display of phone number types Press the [ ] button. (categories) “HF Disconnect” disappears. The category items in the phone book are displayed as follows:

Display Information Making a call by voice dialing “General” / General You can make a voice call using the voice “Home” / Home recognition function of the cell-phone. “Office” / Office 1 Enter the Bluetooth mode “Mobile” / Mobile Press the [ ] button. “BT MODE” is displayed. “Other” / Other 2 Enter the Voice tag mode Turn the Control knob to select “Voice Tag”, and then press the Control knob. 3 Have the cell-phone recognize your spoken word Pronounce the name registered in the cell- phone. The recognized phone number (name) is displayed. 4 Make a call Press the Control knob.

English | 27

12Stepup_B64-4922-00_02_M_en.indd 27 12/01/30 11:08 Bluetooth audio device operation

Before use Display Overview “Play Mode” • You need to register your Bluetooth audio player before using it with this unit. For more details, see “Random” When set to “ON”, plays the songs randomly. (page 22). “ON” / “OFF” “File Repeat” When set to “ON”, plays the select songs • You need to select the Bluetooth audio player you repeatedly. wish to connect. Refer to (page 23). ( : Factory setting) 5 Determine the selection Press the Control knob. Basic operations The previous item is displayed. Selecting Bluetooth audio source 6 Exit the Function setting mode Press the [SRC] button. Press and hold the [ ] button. Select the “BT AUDIO” display. ⁄ Pause and play • The available playback functions differ depending on the Press the [ ] button. type of the connected Bluetooth audio player. Music search Push the Control knob rightward or leftward. Fast forward or Fast backward of the song Switching between Bluetooth devices Push and hold the Control knob rightward or When two Bluetooth devices are connected, you leftward can select the Bluetooth device you want to use.

⁄ 1 Select the Bluetooth audio source • All or some of the operations above cannot be performed if Press the [SRC] button. the Bluetooth audio player is not ready for remote control. Select the “BT AUDIO” display. • Switching between Bluetooth audio sources does not start or stop playback automatically. Perform the operation for 2 Select a Bluetooth device starting or stopping playback. Press the [PRESET] button. • Some audio players cannot be controlled remotely or “Device Priority” is displayed and the currently reconnected after Bluetooth disconnection. Operate the selected device name is displayed. main unit of the audio player to connect a Bluetooth device.

Playback mode You can select a playback mode, such as Random play and Repeat play.

1 Select the Bluetooth audio source Press the [SRC] button. Select the “BT AUDIO” display. 2 Enter the Function setting mode Press and hold the Control knob. 3 Select the Play function mode Turn the Control knob to select “Play Mode”, and then press the Control knob. 4 Select a desired playback mode Turn the Control knob to select a playback mode, and then press the Control knob. 28 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 28 12/01/30 11:08 Bluetooth setup

Registering the PIN code 2 Operate the cell-phone to send the phone book data to this unit By operating the Bluetooth device, specify the PIN By operating the cell-phone, download the phone code necessary for registering this unit. book data to this unit. 1 Enter the Bluetooth mode • During downloading: Press the [ ] button. “Downloading” is displayed. “BT MODE” is displayed. • After completion of downloading: “Completed” is displayed. 2 Enter the Function setting mode Press and hold the Control knob. 3 Operate the cell-phone to start the hands-free connection. 3 Select the PIN code edit item Select the following items using the Control Clearing the downloading completion message knob. Press any button. “Settings” > “Detailed Settings” > ⁄ “PIN Code Edit” • Up to 600 phone numbers can be registered for each registered cell-phone. 4 Input the PIN code • Up to 32 digits can be registered for each phone number Operation type Operation along with up to 50* characters representing a name. Selection of numbers Turn the Control knob. (* 50: Number of alphabetical characters. Fewer characters Movement to the next digit Push the Control knob rightward. can be input depending on the type of characters.) Deletion of the last digit Push the Control knob leftward. • To cancel downloading of the phone book data, operate Transmission of PIN code Press the Control knob. the cell-phone. If “Completed” is displayed, registration is complete. 5 Exit the Bluetooth mode Press the [SRC] button. Displaying the firmware version ⁄ You can view the version of the firmware of this • By default, “0000” is specified. unit. • A PIN code can be specified with up to eight digits. 1 Enter the Bluetooth mode Press the [ ] button. “BT MODE” is displayed. Downloading the phone book 2 Enter the Function setting mode You can download the phone book data from the Press and hold the Control knob. cell-phone to this unit so that you can use the phone book of this unit. 3 Select the Bluetooth firmware update item Select the following items using the Control Downloading automatically knob. If the cell-phone supports a phone book “Settings” > “Detailed Settings” > synchronization function, the phone book is “BT F/W Update” downloaded automatically after Bluetooth The firmware version appears. connection. 4 Exit the Bluetooth mode ⁄ Press the [SRC] button. • Setting on the cell-phone may be required. ⁄ • If no phone book data is found in the unit even after • For how to update the firmware, access our web site. “Completed” is displayed, your cell-phone may not support www.kenwood.com/bt/information/ a phone book data automatic downloading function. In this case, try downloading manually. Downloading from the cell-phone manually 1 Operate the cell-phone to end the hands-free connection. English | 29

12Stepup_B64-4922-00_02_M_en.indd 29 12/01/30 11:08 Bluetooth setup

Bluetooth detail setting “Echo Cancel Level” Sets the echo cancellation level. “-1” – ”0” – “+1” You can configure the initial settings of this unit. ( : Factory setting) 1 Enter the Bluetooth mode 5 Select a Bluetooth detail setting value and Press the [ ] button. determine it “BT MODE” is displayed. Turn the Control knob to select desired setting, 2 Enter the Function setting mode and then press the Control knob. Press and hold the Control knob. The previous item is displayed. 3 Select the Detailed Settings item 6 Exit the Function setting mode Select the following items using the Control Press and hold the [ ] button. knob. “Settings” > “Detailed Settings” 4 Select the desired Bluetooth detail setting item Turn the Control knob to select a Bluetooth detail setting item, and then press the Control knob. Display Overview “Detailed Settings” “Auto Answer” Automatically answers a call after lapse of the preset time interval. “OFF”: Does not answer the phone call automatically. “0SEC”: Automatically answers the phone call at once. “1SEC” – “8SEC” – “99SEC”: Automatically answers the phone call after lapse of 1 – 99 seconds. “Auto Reconnect” When set to “ON”, starts re-pairing with the registered Bluetooth device automatically when it becomes unpaired. “ON” / “OFF” “Bluetooth HF/ Specifies the output speakers for hands-free Audio” voice communication and Bluetooth audio sound. “Front” : Outputs sound from the front speakers. “All” : Outputs sound from the front and rear speakers. “Call Beep” Sets whether to output a beep from the speaker when a call comes in. “ON” : Outputs a beep. “OFF” : Does not output a beep. “MIC Gain” Adjusts the sensitivity of the microphone for telephone call or adjusts the voice of the caller. “1” – ”20” – “30” “NR Level” Reduces the noise generated by the surrounding environment without changing the microphone volume or adjusts the voice of the caller when it is not clear. Setting to a positive (+) value enhances the noise reduction effect. “-1” – ”0” – “+1”

30 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 30 12/01/30 11:08 SMS (Short Message Service)

Displaying the SMS Downloading the SMS You can view the SMS received by the cell-phone on Download the short message (SMS) received by the the display of this unit. cell-phone so that it can be read on this unit. A newly received message is displayed. 1 Enter the Bluetooth mode ¤ Press the [ ] button. • To prevent car accidents, the driver should not read the “BT MODE” is displayed. SMS while driving. 2 Enter the Function setting mode When a new message arrives Press and hold the Control knob. “SMS Received” is displayed. Select the SMS download item The display disappears with any operation. 3 Select the following items using the Control Displaying the SMS knob. 1 Enter the Bluetooth mode “Settings” > “SMS” > “SMS Download” Press the [ ] button. 4 Start downloading “BT MODE” is displayed. Press the Control knob. 2 Select the SMS inbox display mode “Downloading” is displayed. Turn the Control knob to select “SMS Inbox”, When the downloading is completed, “Completed” and then press the Control knob. is displayed. 3 Select a message 5 Exit the Bluetooth mode Turn the Control knob. Press the [SRC] button. Pressing the [DISP] button each time switches ⁄ between the display of the telephone number or • The cell-phone must be able to transmit the SMS using name and the display of the message reception Bluetooth. Setting on the cell-phone may be required. If date. the cell-phone does not support an SMS function, the SMS download item is not displayed in the Function control 4 Display the text mode. Press the Control knob. • When the SMS is downloaded from the cell-phone, the Turn the Control knob to scroll through the unopened messages in the cell-phone are opened. message. • Up to 149 already read and unread short messages can be Press the Control knob to return to the message downloaded respectively. list screen. • “SMS” does not appear in the Function setting item when a SMS supporting device is not connected. 5 Exit the Bluetooth mode Press the [SRC] button. ⁄ • The unopened message is displayed at the beginning of the list. Other messages are displayed in the order of reception. • The SMS that is received when the cell-phone is not linked with Bluetooth cannot be displayed. You need to download it. • The short message cannot be displayed during downloading the SMS.

English | 31

12Stepup_B64-4922-00_02_M_en.indd 31 12/01/30 11:08 SMS (Short Message Service)

SMS reply setting Press and hold the Control knob. You can select a method to reply to the received 3 Select the SMS Message select item SMS. Select the following items using the Control knob. 1 Enter the Bluetooth mode “Settings” > “SMS” > “SMS Message” Press the [ ] button. 4 Select a desired message (language) “BT MODE” is displayed. Turn the Control knob to select a message 2 Enter the Function setting mode (language), and then press the Control knob. Press and hold the Control knob. 5 Exit the Function setting mode 3 Select the SMS Reply item Press and hold the [ ] button. Select the following items using the Control ⁄ knob. • If you select “User” from the message, the previously created “Settings” > “SMS” > “SMS Reply” original message will be sent. Refer to (page 32). • “SMS” does not appear in the Function setting item when a Reply setting Display Operation SMS supporting device is not connected. Auto “Auto” Replies to the received SMS automatically. Manual “Manual” Allows you to select whether to reply to the received SMS. Creating an original message OFF “OFF” Does not reply to the received SMS. You can create an original return message. Turn the Control knob to select Reply setting, and then press the Control knob. 1 Enter the Bluetooth mode Press the [ ] button. 5 Exit the Function setting mode “BT MODE” is displayed. Press and hold the [ ] button. 2 Enter the Function setting mode ⁄ Press and hold the Control knob. • Set the reply message according to (page 32). 3 Select the SMS Message select item • When “Auto” is selected, a reply is made only to the SMS Select the following items using the Control from the phone whose phone number has been registered knob in the phone book. If an SMS is received from the phone “Settings” > “SMS” > “SMS Message” whose phone number has not been registered in the phone book, you can reply to it in the same manner as you 4 Select the SMS message edit mode selected “Manual”. Turn the Control knob to select “User”, and then • When an SMS is received with “Manual” selected, “SMS press the Control knob. Reply” is displayed. Selecting “Yes” sends the reply. Selecting 5 Create a message “No” cancels the reply. Selecting “Yes” allows you to select a message (language). Operation type Operation • If sending of a reply message fails, “Send Error” is displayed. Selection of characters Turn the Control knob. While “SMS Resend” is still displayed on the display, selecting Selection of column Push the Control knob rightward or “Yes” resends the reply. Selecting “No” cancels the reply. leftward. • “SMS” does not appear in the Function setting item when a Selection of character type Press the [DISP] button. SMS supporting device is not connected. Deletion of character Press the [ ] button. Deletion of all characters. Press and hold the [ ] button Return message setting 6 Determine the selection You can select a return message (language). Press the Control knob. 1 Enter the Bluetooth mode 7 Exit the Function setting mode Press the [ ] button. Press and hold the [ ] button. “BT MODE” is displayed. ⁄ 2 Enter the Function setting mode • “SMS” does not appear in the Function setting item when a SMS supporting device is not connected. 32 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 32 12/01/30 11:08 Basic operation of remote control

On CD/Audio file source VOL SRC • Music selection: [4]/[¢] • Folder selection: [FM]/[AM] ATT • Pause/Play: [ENT] ENT • Enter the Music search mode: [5]/[∞] 5/∞ • Movement between folders/files during Music search mode: [ ]/[ ] EXIT AUD 5 ∞ • Return to previous folder: [ ] AM FM On iPod source 0 — 9 • Enter Music search mode: [5]/[∞] • Movement between items during Music search DIRECT mode: [5]/[∞] • Return to previous item: [ ] • Pause/Play: [ENT]

Hands-free phone control Preparing the remote control unit Pull the battery sheet out from the Making a call remote control unit in the direction of • Enter Bluetooth mode: [ ] the arrow. • Select a dialing method: [5]/[∞] ➜ [ENT] • Number dial input: Changing the battery of the remote control Input a digit: [0] – [9] unit Input “+”: [¢] Keep on Use a commercially available Input “#”: [FM] sliding button battery (CR2025). Input “*”: [AM] Insert the battery with the + Clear the entered phone number: [4] and – poles aligned properly, • Make a call: [DIRECT] CR2025 following the illustration Pull out (+side) inside the case. Receiving a call • Answer the call: [ ] Call waiting General control • Answer another incoming call with the current call suspended: [ ] • Volume control: [VOL] • Source selection: [SRC] During a call • Volume reduction: [ATT] • End the call: [SRC] When the button is pressed again, the volume returns to the previous level. • Return to previous item: [ ] • Exit from mode: [EXIT] ¤ CAUTION • Selection of item: [5]/[∞] • Determination: [ENT] • Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries • Enter Audio Control mode: [AUD] promptly. If swallowed contact physician immediately. • Do not leave the battery near fire or under direct On Tuner source sunlight. A fire, explosion or excessive heat generation may result. • Band selection: [FM]/[AM] • Do not set the remote control in hot places such as on • Station selection: [4]/[¢] the dashboard. • Recall preset stations: [0] – [9] ➜ [ENT] • The Lithium battery is in danger of explosion if replaced incorrectly. Replace only with the same or equivalent type. English | 33

12Stepup_B64-4922-00_02_M_en.indd 33 12/01/30 11:08 Appendix

About the Audio file About the USB device • Playable Audio files • When the USB device is connected to this unit, it is AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) charged when this unit is powered. • Playable disc media • Install the USB device in the place where it will not CD-R/RW/ROM prevent you from driving your vehicle properly. • Playable disc file formats • You cannot connect a USB device via a USB hub or ISO 9660 Level 1/2, Joliet, Romeo, Long file name. multi card reader. • Playable USB devices • Save backups of the audio files used with this unit. USB mass storage class The files can be erased depending on the operating • Playable USB device file systems condition of the USB device. FAT16, FAT32 We shall not be liable for any damage arising out of Even if the audio files comply with the standards erasure of the stored data. listed above, playback may be impossible depending • No USB device comes with this unit. You need to on the type or condition of the medium or device. purchase a commercially available USB device. • Playback order of the Audio files • When connecting the USB device, use of the In the example of folder/file tree shown below, files CA-U1EX (option) is recommended. are played in the order of number from ① to ⑩. • Normal playback is not guaranteed when a cable CD (1) ^ :Folder Folder other than the USB compatible cable is used. ¡ :Audio Audio file le Connecting a cable whose total length is longer ¡! than 4 m can result in abnormal playback. 2 3 ¡" ¡# 4 ¡$ 5 ¡% ¡P For the online manual describing audio files, visit www.kenwood.com/cs/ce/audiofile/. In this online manual, detailed information and notes which are not provided in this manual are provided. Make sure to read through the online manual as well. ⁄ • In this manual, the term “USB device” indicates a flash memory or digital audio player which has a USB terminal.

34 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 34 12/01/30 11:08 Models of iPods/iPhones that can be About “KENWOOD Music Editor” connected to this unit • This unit supports the PC application “KENWOOD Made for Music Editor Light ver1.1” or later. • iPod nano (6th generation) • iPod nano (5th generation) • When you use the audio file with database • iPod nano (4th generation) • iPod nano (3rd generation) information added by the “KENWOOD Music Editor • iPod nano (2nd generation) • iPod nano (1st generation) Light ver1.1”, you can search for a file by title, album • iPod with video • iPod classic or artist name using the function mentioned in • iPod touch (4th generation) • iPod touch (3rd generation) (page 12). • iPod touch (2nd generation) • iPod touch (1st generation) • In the Instruction manual, the term “Music Editor • iPhone 4S • iPhone 4 media” indicates the device that contains audio files • iPhone 3GS • iPhone 3G with database information added with KENWOOD • iPhone Music Editor. • “KENWOOD Music Editor Light ver1.1” is available • For information on the compatibility with iPod/ from the following web site: iPhone software, visit www.kenwood.com/cs/ce/ www.kenwood.com/cs/ce/ ipod/. • For further information on “KENWOOD Music • Types of available control vary depending Editor Light ver1.1”, refer to the site above or the on the type of connected iPod. Visit application help. www.kenwood.com/cs/ce/ipod/ for further details. • The word “iPod” appearing in this manual indicates About the Bluetooth module the iPod or the iPhone connected with the iPod This unit conforms to the following Bluetooth connection cable (optional accessory). specifications: • Refer to the web site for connectable iPods and iPod connection cables. Version Bluetooth Ver. 3.0 Certified www.kenwood.com/cs/ce/ipod/ Profile HFP (Hands Free Profile) HSP (Headset Profile) ⁄ SPP (Serial Port Profile) • If you start playback after connecting the iPod, the music A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) that was playing on the iPod is played first. PBAP (Phonebook Access Profile) In this case, “RESUMING” is displayed without displaying a OPP (Object Push Profile) folder name, etc. Changing the browse item will display a correct title, etc. For the cell-phones verified for compatibility, access • You cannot operate the iPod if “KENWOOD” or “✓” is the following URL: displayed on the iPod. http://www.kenwood.com/cs/ce/bt/ ⁄ • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG. However, it may be impossible for such units to communicate with your cell-phone depending on its type. • HFP is a profile used to make a hands-free call. • OPP is a profile used to transfer data such as a phone book between units.

English | 35

12Stepup_B64-4922-00_02_M_en.indd 35 12/01/30 11:08 Troubleshooting guide

Some functions of this unit may be disabled by What might seem to be a malfunction in your unit some settings made on this unit. may just be the result of a slight operation error or a wiring error. Before calling for service, first check the ! • Cannot set up display. following table for possible problems. ▲ The demonstration mode is not turned off as mentioned in (page General 20). ? The key beep does not sound ! • Cannot set the “Text Select”, “Side Select”, or  The Preout jack is in use. “Status” setting for the “Display Select” item.  The key beep cannot be output from the Preout ▲ A display type is not selected as mentioned in jack. (page 16). ? • Sound cannot be heard. • The unit does not turn on. ! • Cannot set up the subwoofer. • Information shown on the display is incorrect. • Cannot set up the low pass filter.  The connectors are dirty. • No output from the subwoofer.  Clean the connectors. Refer to (page 4). control> (page 7). Tuner source ! Cannot set up the subwoofer phase. ▲ “LPF SubWoofer” is set to “Through” as mentioned in ? Radio reception is poor.

36 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 36 12/01/30 11:08 The messages shown below indicates your “No Number” system condition. • The calling party does not notify a caller ID. • There is no phone number data. “TOC Error” “No Data” • The CD is quite dirty. The CD is upside-down. The CD is • There is no outgoing call list. scratched a lot. • There is no incoming call list. • The disc is unreadable. • There is no missed call list. “IN” (blink) • There is no phone book list. • The CD player section is not operating properly. “No Entry” ➪➪ Reinsert the CD. If the CD cannot be ejected or the • The cell-phone has not been registered (pairing). display continues to blink even when the CD has been properly reinserted, please switch off the power “HF Disconnect” and consult your nearest service center. • The unit cannot communicate with the cell-phone. “Protect” (blink) “AUD Disconnect” • The speaker wire has short-circuited or touched the • The unit cannot communicate with the Bluetooth audio chassis of the vehicle, and then the protection function player. has been activated. “HF Error 07” ➪➪ Lay or insulate the speaker cable properly and press • The memory cannot be accessed. the Reset button. If “Protect” does not disappear, ➪➪ Cycle the power switch. If this message still appears, consult your nearest service center. press the Reset button on the control unit. “NA File” “HF Error 68” • An Audio file is played in a format that is not supported • The unit cannot communicate with the cell-phone. by this unit. ➪➪ Cycle the power switch. If this message still appears, “Copy PRO” press the Reset button on the control unit. • A copy-protected file is played. “HF Error 89” “Read Error” • Update of the firmware has failed. • The file system of the connected USB device is broken. ➪➪ Retry update of the firmware. ➪➪ Copy the files and folders for the USB device again. If “Unknown” “Read Error” is still displayed, initialize the USB device • The Bluetooth device cannot be detected. or use another USB device. “Device Full” “No Device” • 5 Bluetooth device have already been registered. No more • A USB device is selected as a source although no USB Bluetooth devices are registered. device is connected. ➪➪ Change the source to any source other than the “PIN Code NG” USB device. Connect an USB device, and change the • The PIN code is wrong. source to the USB device again. “Connect NG” “N/A Device” • The unit cannot be connected to the device. • An unsupported USB device is connected. “Pairing Failed” • Connection to the iPod has failed. • Pairing error. ➪➪ Check that the connected iPod is supported. See “N/A Voice Tag” (page 34) for information • No voice tags are registered in your cell-phone. on supported iPods. “No Phonebook” “No Music Data” • Data is not contained in the phone book. • The connected USB device contains no playable audio file. “No Message” • A medium that does not have playable data has been • No short message in In Box. played. “Send Error” “iPod Error” • SMS could not be sent. • Connection to the iPod has failed. “No Support” ➪➪ Remove the USB device and then reconnect it. • The connected Bluetooth device does not support a ➪➪ Reset iPod/ iPhone. voice recognition function. “No Active Device” • Any Bluetooth device supporting a voice recognition function is not connected.

English | 37

12Stepup_B64-4922-00_02_M_en.indd 37 12/01/30 11:08 Specifications

FM tuner section USB interface Frequency range USB Standard 200 kHz step : 87.9 MHz – 107.9 MHz : USB1.1/ 2.0 (Full speed) 50 kHz step : 87.5 MHz – 108.0 MHz File System Usable sensitivity (S/N = 26dB) : FAT16/ 32 : 11.2dBf (1 μV/75 Ω) Maximum Supply current Quieting Sensitivity (S/N = 46dB) : DC 5 V 1 A : 19.2dBf (2.5 μV/75 Ω) MP3 decode Frequency response (±3 dB) : Compliant with MPEG-1/2 Audio Layer-3 : 30 Hz – 15 kHz WMA decode Signal to Noise ratio (MONO) : Compliant with Windows Media Audio : 63 dB AAC decode Stereo separation (1 kHz) : AAC-LC “.m4a” files : 40 dB Audio section AM tuner section Maximum output power Frequency range : 50 W x 4 10 kHz step : 530 kHz – 1700 kHz Full Bandwidth Power (at less than 1% THD) 9 kHz step : 531 kHz – 1611 kHz : 22 W x 4 Usable sensitivity (S/N = 20dB) Speaker Impedance : 31 dBµ (36 µV) : 4 – 8 Ω Tone action CD player section Bass : 100 Hz ±8 dB Middle : 1 kHz ±8 dB Laser diode Treble : 12.5 kHz ±8 dB : GaAlAs Preout level/ Load (CD) Digital filter (D/A) : 2500 mV/10 kΩ : 8 Times Over Sampling Preout impedance D/A Converter : ≤ 600 Ω : 24 Bit Spindle speed (Audio files) : 500 – 200 rpm (CLV) Bluetooth section Wow & Flutter Version : Below Measurable Limit : Bluetooth Ver. 3.0 Certified Frequency response (±1 dB) Frequency range : 10 Hz – 20 kHz : 2.402 – 2.480 GHz Total harmonic distortion (1 kHz) Output Power : 0.008 % : +4dBm (MAX), 0dBm (AVE) Power Class 2 Signal to Noise ratio (1 kHz) Maximum Communication range : 110 dB : Line of sight approx.10m Dynamic range Profiles : 93 dB : HFP (Hands Free Profile) MP3 decode : HSP (Headset Profile) : Compliant with MPEG-1/2 Audio Layer-3 : SPP (Serial Port Profile) WMA decode : A2DP (Advanced Audio Distribution Profile) : Compliant with Windows Media Audio : AVRCP (Audio/Video Remote Control Profile) AAC decode : PBAP (Phonebook Access Profile) : AAC-LC “.m4a” files : OPP (Object Push Profile)

38 | KDC-U7053BT/ KDC-U7053BTL

12Stepup_B64-4922-00_02_M_en.indd 38 12/01/30 11:08 Auxiliary input The marking of products using lasers Frequency response (±3 dB) : 20 Hz – 20 kHz CLASS 1 Input Maximum Voltage : 1200 mV LASER PRODUCT Input Impedance : 10 kΩ The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing General laser beams that are of a weaker class. There is no Operating voltage danger of hazardous radiation outside the unit. : 14.4 V (10.5 – 16V allowable) Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 160 mm Weight : 1.3 kg

• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • The “AAC” logo is a trademark of Dolby Laboratories. • iTunes is a trademark of Apple Inc. • “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. • iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Specifications subject to change without notice. English | 39

12Stepup_B64-4922-00_02_M_en.indd 39 12/01/30 11:08 12Stepup_B64-4922-00_02_M_en.indd 40 12/01/30 11:08