Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
Motorola Moto X Style (Moto X Pure Edition) Teardown
Illustration here shows how to do Motorola Moto X Style/Moto X Pure Edition complete teardown/disassembly. 作成者: Witrigs
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 1 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08 はじめに [video: https://www.youtube.com/watch?v=bCDq7q4fTt4] ツール: iFixit Opening Picks set of 6 (1) Tweezers (1) Metal Spudger (1) T3 Torx Screwdriver (1)
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 2 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
手順 1 — Motorola Moto X Style (Moto X Pure Edition) Teardown
Remove SIM card tray
手順 2
Insert eject pin to the small hole to open a gap.
You can use heat gun/hair dryer to heat up the rear cover and help adhesive melting.
Use guitar picks to cut the strong adhesive underneath this rear cover.
Remove back cover.
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 3 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
手順 3
Use T3 Torx screwdriver to twist off all 21 screws. You don't need to remove the silver screw holding the volume buttons down for most tasks, such as replacing the screen, battery, or USB port.
Remove 2 protective rubbers securing the flashlight flex and battery flex connector.
手順 4
Release the flashlight flex and battery flex connector.
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 4 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
手順 5
Remove metal bar securing side buttons, careful of the extremely tiny springs that provide pressure from the frame to the buttons, then be free to remove side buttons.
Remove middle frame bezel.
手順 6
Pull out 2 battery sticker strips.
Loosen the NFC flex connector attached to the battery.
Pry up and remove battery.
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 5 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
手順 7
There is no adhesive sticking headphone jack, just use tweezers to remove it.
Then peel off the NFC antenna.
手順 8
Release flashlight flex connector connecting side button flex.
Take away flashlight flex.
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 6 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
手順 9
Pry up and remove power&volume button flex.
手順 10
Twist off one Torx T3 screw securing motherboard.
Release the LCD screen connector here.
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 7 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
手順 11
Release this connector.
Separate motherboard assembly from LCD screen assembly.
手順 12
Release front camera flex and remove it.
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 8 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
手順 13
There is adhesive underneath. Pry up and then remove top speaker.
手順 14
Peel off protective tape on the rear camera.
Release rear camera flex and then remove the camera.
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 9 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き： 2018-10-08
手順 15
Pry up and remove loudspeaker.
Now it leaves the motherboard assembly with some parts like charing port and vibration motor.
手順 16
Remove the LCD shield easily.
Finally it leaves the LCD screen with digitizer and front housing.
It is better to replace Moto X Style LCD screen and digitizer assembly and front housing together, if you have no confidence to remove it without breaking the screen during the repair work.
㓠㮠文書㯠2020-11-20 05:12:13 PM (MST)㫠作æˆã • れ㾠㗠㟠。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã® 10