Motorola Moto X Style (Moto X Pure Edition) Teardown

Motorola Moto X Style (Moto X Pure Edition) Teardown

Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 Motorola Moto X Style (Moto X Pure Edition) Teardown Illustration here shows how to do Motorola Moto X Style/Moto X Pure Edition complete teardown/disassembly. 作成者: Witrigs ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 1 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 はじめに [video: https://www.youtube.com/watch?v=bCDq7q4fTt4] ツール: iFixit Opening Picks set of 6 (1) Tweezers (1) Metal Spudger (1) T3 Torx Screwdriver (1) ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 2 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 手順 1 — Motorola Moto X Style (Moto X Pure Edition) Teardown Remove SIM card tray 手順 2 Insert eject pin to the small hole to open a gap. You can use heat gun/hair dryer to heat up the rear cover and help adhesive melting. Use guitar picks to cut the strong adhesive underneath this rear cover. Remove back cover. ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 3 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 手順 3 Use T3 Torx screwdriver to twist off all 21 screws. You don't need to remove the silver screw holding the volume buttons down for most tasks, such as replacing the screen, battery, or USB port. Remove 2 protective rubbers securing the flashlight flex and battery flex connector. 手順 4 Release the flashlight flex and battery flex connector. ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 4 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 手順 5 Remove metal bar securing side buttons, careful of the extremely tiny springs that provide pressure from the frame to the buttons, then be free to remove side buttons. Remove middle frame bezel. 手順 6 Pull out 2 battery sticker strips. Loosen the NFC flex connector attached to the battery. Pry up and remove battery. ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 5 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 手順 7 There is no adhesive sticking headphone jack, just use tweezers to remove it. Then peel off the NFC antenna. 手順 8 Release flashlight flex connector connecting side button flex. Take away flashlight flex. ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 6 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 手順 9 Pry up and remove power&volume button flex. 手順 10 Twist off one Torx T3 screw securing motherboard. Release the LCD screen connector here. ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 7 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 手順 11 Release this connector. Separate motherboard assembly from LCD screen assembly. 手順 12 Release front camera flex and remove it. ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 8 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 手順 13 There is adhesive underneath. Pry up and then remove top speaker. 手順 14 Peel off protective tape on the rear camera. Release rear camera flex and then remove the camera. ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 9 Motorola Moto X Style (Moto X Pure Edit… ガイド ID: 54988 - 下書き: 2018-10-08 手順 15 Pry up and remove loudspeaker. Now it leaves the motherboard assembly with some parts like charing port and vibration motor. 手順 16 Remove the LCD shield easily. Finally it leaves the LCD screen with digitizer and front housing. It is better to replace Moto X Style LCD screen and digitizer assembly and front housing together, if you have no confidence to remove it without breaking the screen during the repair work. ã“​ ã®​ 文書ã¯​ 2020-11-20 05:12:13 PM (MST)ã«​ 作æˆã​ •​ ã‚Œã¾​ ã—​ ãŸ​ 。 © iFixit — CC BY-NC-SA jp.iFixit.com ページ10ã®​ 10.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    10 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us