DOCSLIB.ORG

FABRIC – TAPES DACRON TAPE / PEEL PLY FLORIAN PINKER a Layer of 2.7 Oz

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
FABRIC – TAPES DACRON TAPE / PEEL PLY FLORIAN PINKER a Layer of 2.7 Oz FABRIC – TAPES DACRON TAPE / PEEL PLY FLORIAN PINKER A layer of 2.7 oz. Dacron fabric strips or tape One continuous pinked edge while being laminated into a layup as if it were an extra ply comfortable for either right or left hand use. CM of glass. The peel coat wets out with epoxy like Light and compact for easy use and easy glass cloth and cures along with the rest of the storage. Gives that “professional look” to layup. However, the Dacron does not adhere your own creations and easily pinks the most structurally to the glass and when peeled away it leaves a surface ready intricate patterns. Made in U.S.A. for glass-to-glass bonding without sanding. P/N 09-01400 ...........$77.50 Requirements for Small Aircraft: For Experimental Aircraft. WP • 3 Rolls of 1” x 50 Yds. Tape • 2 Rolls of 2” x 50 Yds. Tape • 1 Roll of FABRIC PRO DIGITAL 3” x 50 Yds. Tape • 1 Roll of 4” x 50 Yds. Tape COVERING FABRIC IRON Width Smooth Edge Pinked • Fabric Pro Digital Iron - Perfomance and Precision • Lightweight and compact • Excellent 50 Yd./ Price/ Price/ Part No. Part No. on edges and corners • Easy to read digital ME Roll Roll Roll temperature readout • Uniform heat plate 1” 09-15000 $5.35 09-15450 $5.50 creates a perfect finish 2” 09-15100 $11.95 09-15500 $12.50 P/N 09-05728 .........$229.00 3” 09-15200 $18.80 09-15600 $17.85 4” 09-15300 $24.80 09-15700 $24.50 PANASONIC IRON MULTI 6” 09-15400 $37.75 09-15800 $36.65 DIRECTIONAL 360 DEGREE HA New Concept 360° Quick Steam/Dry Iron with Discount Schedule for Dacron Tapes: Less 10% for 12 Rolls Curved Non-Stick Coated Titanium Soleplate, (assorted) • Less 15% for 25 Rolls (assorted). Request quote on Multi-Directional Design with Added Steam larger quantities. Vents, 3-Way Auto Shut-Off, Adjustable DACRON FABRIC / FULL Steam, Dial Temperature Control, “Stay Clean” AP Steam Vents and Anti-Drip System. Maximum WIDTH PEEL PLY Temperature 392F (200C). Controls: Choose Steam Poly/Dacron blend is excellent as peel ply for or Dry Operation: 4 Button Selector. Select “Extra” Jet-of- composite lay-ups, and for covering experimental Steam: Left Pushbutton. Cool Water Spay or Mist: Right Pushbutton. aircraft. P/N 09-03785 ...........$85.75 2.97 oz. X 62” #605 ....P/N 09-00500 ....$4.35/yd. LG FLAMMABLE DACRON BIAS TAPE FAB-TAC FABRIC CEMENT FOR HOMEBUILT AIRCRAFT A superior quality cement for strong splice joints. Use to cement tapes, rings and grom- Bias-cut tapes (weave 45° to edge) are especially mets to fabric cover. EP useful for trimming compound curves on com po- This nitrocellulose type lacquer cement is nents such as wing tips and tail surfaces. Bias used to cement aircraft synthetic and cot- tape will stretch to conform to the contour without ton fabrics, tapes, and grommets to fabric, wrinkles, without heat-shrinking edges or cutting cement aircraft fabric to plywood and metal in and notching to remove excess fabric. Stretch ing airplane construction and for attaching uphol- reduces the width about 35% so 3” tape should stery and soundproofing to cabin interiors. CS be used to finish areas normally covered with 2” tape. 2” Bias tape will It is an excellent all-purpose cement for use on model airplanes. May pull to about 1-3/8” width. be added to aircraft dope to improve adhesion to synthetic fabrics (one 2” x 50 Yd . Roll ..........................................P/N 09-16300 ...........$26.75 quart of FAB-TAC to a gallon of DOPE). This smooth flowing adhesive 3” x 50 Yd. Roll............................................P/N 09-16400 ...........$58.50 dries in 15 minutes to a tough film with a high tensile strength. May be NOT FOR USE ON CERTIFIED AIRCRAFT coated over in 1 hour. Brush coating covers 110 square feet per gallon. 1 Pint ...........................................................P/N 09-17800 ...........$13.75 IN COTTON RE IN FORC ING 1 Qt ..............................................................P/N 09-17900 ...........$18.65 TAPES 1 Gal. ...........................................................P/N 09-18000 ...........$59.75 .015” thick cotton tape used mostly for inter rib bracing during the covering process. 1/2” x 36 CLOTH MASKING TAPE yds., and two rolls will generally take care of a set Has many uses in aircraft maintenance work. EL of standard size wings (ie – J3 Cub). Strip over sharp corners under fabric. Strips P/N 09-17000 ...........$14.95 on parts under doped fabric will prevent fab- ric from sticking to parts. Pressure-sensitive adhesive backing. Easily applied, easily THREADS & CORDS removed. Leaves no residue. Should not be Only synthetic threads and rib lacing cords should be applied below 32°F. used with Dacron covering to insure uniform strength. 1” x 60 yds ........P/N 09-17100 ...........$11.50 AV Waxed linen rib cord Conforms to PMA# TQ0075NM and STC# SA1008WE. SOLDERING IRON Use to melt drain holes and inspection rings Material Quantity Part No. Price in polyester fabric. 35 Watt, 900°F tip. Tip is Dacron Machine Sewing Thread 500 Yds. 09-03900 $17.50 replaceable & long life coated. P/N 09-37430 ...........$91.75 TO Dacron Hand Sewing Thread 250 Yds. 09-04000 $15.50 HEAVY-DUTY HEAT GUN SAIL FABRIC This soft air velocity of this heat gun increas- #1003 Glacier White Sail Fabric. 54” wide. 4.1 oz. Color may vary from es the surface temperature to the required sample shown. Sold by the yard. Note: This fabric is for ultralight sails, working temperature much faster than con- PS and will not shrink. ventional heat guns and maintains a higher Color Part No. Price temperature for faster completion of the 1003 Glacier White 15-04587 $10.85 application. Features double insulation, two 192 Lime Green 15-04588 $16.50 temperature selections of 570°F and 1000°F, and a unique impact resistant heating ele- 196 Deep Purple 15-04589 $14.65 ment. Operates on 120V AC at 11.6 amps. BV 197 Red 15-04590 $15.80 Air volume 14.8 cu. ft. per minute. Wt. 1-1/2 201 Jet Black 15-04591 $16.50 lbs......................P/N 09-00354 .........$132.75 232 Hot Pink 15-04592 $14.65 309 Emerald Green 15-04593 $14.65 MAULE FABRIC TESTER 310 Royal Blue 15-04595 $16.50 A fine quality tool to test fabric covered 360 Key West Blue 15-04597 $15.80 aircraft for minimum FAA requirements with- 566 West Coast Gold 15-04598 $14.60 out removing or punching holes in fabric. Also used to test struts for inside rusting as required by FAA on all Piper aircraft with struts .................P/N 09-14900 ........ $514.00 WWW.AIRCRAFTSPRUCE.COM 462 Prices Subject to Change Without Notice.
Load more

Recommended publications
  • S-6S Text Manual
    0or* -- *IF9 S-6s COYOTE II 1 16WING HAYS, KS 6760 1 (7.51 625-6346 DESIGNED BY: RANDY SCHLITTER Your manual is ready for assembly: 1. Place the technical manual in the larger 3 ring binder and the parts manual in the smaller 3 ring binder. Every page has a section number then a page number within that section. (Example: parts page 13-02) Parts pages have an exploded view and a parts listing. Text pages are assigned with the prefix "0". 2. Separate the sections with the tab inserts listed below. Follow the table of contents for the order that the manual should follow. 3. Cut out and slip in the labels to corresponding sections. -------r------ -I------- T - - 1 GENERALDATA S-1 FIREWALL DOORS -wyNi- I I I I I I I I I I I I I GENERAL DATA I S-1 FIREWALL I DOORS I WINGS I OPTIONS I -r------1 - FuLLAOE - EN; NE -wTNisiEL - TilZ I' I MOUNT I I LsGMsLY I I I I I I I I r-------r-( FUSELAGE I ENGINE------I------- MOUNT I WINDSHIELD I TRIAL ASSEMBLY I I -r------1 MAIN GEAR TAILCONE BATTERY Box - - I I I I I I I I I I I I ( MAlN GEAR 1 TAILCONE I BATTERY BOX I COVERING I I ----- l- - - - - - - l- - - - - - - -I- - - - - - - 1-------1 -NOSE GEAR, CONTROL STICK SEATISEAT BELT PAINTING I TAILWHEEL I I I I I I NOSE GEAR1 1 I 1 I I ( TAILWHEEL I CONTROL STICK I SEATISEAT BELT I PAINTING I I FLOoiBiAiD; - TNTERIO; - T--T~L-- lNZisSEMBLY -r------l I RUDDER PEDAL I I I I I I FLOORBOARD1 I I I I I ...........................I RUDDER PEDAL I INTERIOR I TAIL I FINAL ASSEMBLY--------- I I RANS, RANS, INC.
    [Show full text]
  • Poly-Fiber Aircraft Coatings
    POLY-FIBER AIRCRAFT COATINGS AIRCRAFT SPRUCE - WORLD’S LARGEST DISTRIBUTOR OF POLY-FIBER PRODUCTS This FAA approved process utilizing Poly-Fiber Dacron polyester and the unique “Poly” line of finishes assures a beautiful, durable, weather-resistant cover job every time. Documented time tested results by the pro fes sion als. The Poly-Fiber Covering Process was CM issued Supplemental Type Cer tifi cate No. SA-1008-WE in 1965 and this number will apply to all aircraft. Note: Formerly known as Stits covering process. Only Poly-Fiber materials may be used through the topcoat paint to comply with STC requirements. Poly-Fiber finishes are required for approval. Poly-Fiber is approved for use on most certified aircraft. To be sure, check the Master Eligibility List in the latest revision of Poly-Fiber Procedure Manual No. 1. WP POLY-FIBER FABRIC UNCERTIFIED LIGHT THE POLY-FIBER 1.87 oz/sq. yard. Lightweight fabric recommended for covering ultralight aircraft. This fabric will be unstamped. PRACTICE KIT It is not approved for certified aircraft except on plywood If you’re thinking of building a fab- surface. 72” Width .... P/N 09-02001 .....$9.65 /Lineal Yd. ric-covered airplane but are won- ME MEDIUM WEIGHT dering what the covering process 2.79 oz/sq. yard. Standard fabric recommended for nor- is like, this is the perfect answer. mal service on all types of aircraft regardless of speed, You get a practice frame, fabric, wing loading or horsepower. tapes, needles, rib lacing cord, P/N 09-01600 ...$13.50 /Lin eal Yd. thermometer, instructions, and all HA HEAVY DUTY the coatings you need to work through the Poly-Spray stage.
    [Show full text]
  • Eaa 430 Flyer
    Serving the Port Angeles & Sequim Area EAA 430 FLYER February 2019 Dedicated to having fun with airplanes and promoting General Aviation CHAPTER CHATTER “That's not my job!” This is a story about four individuals named: Everybody, Somebody, Anybody and Nobody. There was an important job to be done and Everybody was sure that Somebody would do it. Anybody could have done it, but Nobody did it. Somebody got angry about that because it was Everybody’s job. Everybody thought Anybody could do it, but Nobody realized that Everybody would not do it. It ended up that Everybody blamed Somebody when Nobody did what Anybody could have done. In our chapter, we are blessed with volunteers who step up. As we continue to grow, we need to expand the numbers of volunteers who pitch in and in come alongside those now serving. I would like to see a mentorship program begin to “train up” the next set of leaders. Doing this will magnify the efforts of the volunteers and spread out the task. This would definitely be a WIN WIN for the chapter. Our March meeting will be in our new home at Sequim Valley Airport. Bud Davies’ hangar #15 will be the location for the near future. Meeting dates and times have not changed … still the last Saturday of the month at 1000. A schedule for the moving day will be determined and a special email announcement will be sent to the membership. Many hands make a large task much smaller. Join us. Several members of the Board of Directors will be attending the EAA BOOT CAMP (leadership training – open to all EAA members) in Puyallup WA on Friday the 22nd.
    [Show full text]
  • MS-486 Title: the William Laufer Aviation Collection Dates
    MS-486, William Laufer Aviation Collection Collection Number: MS-486 Title: The William Laufer Aviation Collection Dates: 1919-1998 (Bulk 1940-1980) Creator: Laufer, William L., 1933-2002 Summary/Abstract: William Laufer was an aviation mechanic for the Southern Ohio Aviation Company and later, an instructor for the Miami Valley Career Technology Center teaching in their FAA Certified Aircraft Mechanic’s program. The collection contains aircraft maintenance training material, general federal aviation maintenance guidance, and a variety of aircraft maintenance manuals including manuals for Beechcraft, Cessna, Douglas, and WACO airplanes. The collection also includes parts catalogs and sales brochures for propeller-driven aircraft, including aircraft engines, propellers, and a variety of parts for aircraft including gyroscopes, radios, spark plugs, and generators. Quantity/Physical Description: 17 linear feet Language(s): English Repository: Special Collections and Archives, University Libraries, Wright State University, Dayton, OH 45435-0001, (937) 775-2092 Restrictions on Access: Parts of this collection are stored off-site. Please provide us at least two days advance notice if you would like to research this collection. Call (937) 775-2092 or e-mail us at [email protected]. Restrictions on Use: Copyright restrictions may apply. Unpublished manuscripts are protected by copyright. Permission to publish, quote or reproduce must be secured from the repository and the copyright holder. Preferred Citation: (Box # File #) MS-486, William Laufer Aviation Collection, Special Collections and Archives, University Libraries, Wright State University, Dayton, Ohio Acquisition: The William Laufer Aviation Collection was donated to Special Collections and Archives by Gail R. Laufer, William Laufer’s wife, in September 2013.
    [Show full text]
  • Covering a Lightplane Fuselage
    Covering A Lightplane Fuselage By Bob Whittier, EAA 1235 P. O. Box 543, South Duxbury, Mass. HIS ARTICLE will seem to cover details which are would be to choose a piece 20 ft. long and perhaps 48 T "old hat" to the experienced aircraft mechanic and in. wide. You would measure about 1 ft. inward from amateur aircraft builder. It has been written as a result one end, and the same amount inward from the diagon- of a growing number of requests from newcomers to our ally opposite end, and make an almost-diagonal cut to get sport and magazine for fundamental how-to-do-it infor- the two side pieces. Or one piece of cloth 36 in. wide mation on aircraft fabric work. So it is hoped that the might give enough cloth to cover one side and the bot- old-timers will indulge us this attempt to be of assistance tom. to the many enthusiastic newcomers! If one is uncertain, it is possible to use lengths of The subject in the photographs is the fuselage of a brown wrapping paper of appropriate width to make pat- 1935 model E-2 Cub, rebuilt by the author a short time terns, or to make miniature patterns to scale from the ago. Therefore the procedure to be described is applic- blueprints or model, and juggle them around on rec- able to aircraft in both the antique and amateur-built tangles drawn to scale and representing contemplated fab- classes. In the job to be described, Grade A cotton air- ric lengths and widths, to find the most economical size.
    [Show full text]
  • Dictionary of Aeronautical Terms Aeronautical of Dictionary
    ASA DICTIONARY DICTIONARY OF AERONAUTICAL TERMS DICTIONARY OF AERONAUTICAL TERMS DICTIONARY OF Dale Crane’s ultimate reference book contains more than 11,000 AERONAUTICAL accurate, aviation-specific terms and definitions, updating and gathering all the terms in Title 14 of the Code of Federal Regulations, glossaries from FAA handbooks, advisory circulars and manuals, the Aeronautical Information Manual (AIM) and Pilot/Controller Glossary, TERMS as well as definitions not found in government publications. Nearly 500 illustrations further define and aid visual recognition of the terms, and Over 11,000 entries useful tables and lists are included in appendices. In an industry of acronyms and technical language, this comprehensive Based on the original compilation by dictionary is an essential reference book for anyone involved with aviation and/or space organizations—administrators, pilots, maintenance technicians, drone operators, colleges and universities, DALE CRANE air traffic controllers, manufacturers, engineers, government agencies, airlines, and corporate flight departments, as well as newcomers to the industry, and those who speak English as a second language. SIXTH EDITION The ASA Dictionary of Aeronautical Terms, now in its Sixth Edition, is a vital reference tool that belongs on every aviation bookshelf. SIXTH EDITION Aviation Supplies & Academics, Inc. 7005 132nd Place SE Newcastle, Washington 98059 425-235-1500 www.asa2fly.com ASA-DAT-6 ASA-DAT-6 Dictionary of Aeronautical Terms, Sixth Edition Based on all previous editions by Dale Crane, and continually revised and edited by ASA Editorial Staff. Aviation Supplies & Academics, Inc. 7005 132nd Place SE Newcastle, Washington 98059-3153 Email: [email protected] Website: www.asa2fly.com Visit www.asa2fly.com/reader/dat for the “Reader Resources” page for additional information as new terms and definitions are collected.
    [Show full text]
  • Aircraft Painting and Finishing
    Chapter 8 Aircraft Painting and Finishing Introduction Paint, or more specifically its overall color and application, is usually the first impression that is transmitted to someone when they look at an aircraft for the first time. Paint makes a statement about the aircraft and the person who owns or operates it. The paint scheme may reflect the owner’s ideas and color preferences for an amateur-built aircraft project, or it may be colors and identification for the recognition of a corporate or air carrier aircraft. 8-1 Paint is more than aesthetics; it affects the weight of the Ethanol or denatured alcohol is used to thin shellac for aircraft and protects the integrity of the airframe. The spraying and as a constituent of paint and varnish remover. It topcoat finish is applied to protect the exposed surfaces from can also be used as a cleaner and degreaser prior to painting. corrosion and deterioration. Also, a properly painted aircraft is easier to clean and maintain because the exposed surfaces Isopropyl, or rubbing alcohol, can be used as a disinfectant. are more resistant to corrosion and dirt, and oil does not It is used in the formulation of oxygen system cleaning adhere as readily to the surface. solutions. It can be used to remove grease pencil and permanent marker from smooth surfaces, or to wipe hand or A wide variety of materials and finishes are used to protect fingerprint oil from a surface before painting. and provide the desired appearance of the aircraft. The term “paint” is used in a general sense and includes primers, Benzene enamels, lacquers, and the various multipart finishing Benzene is a highly flammable, colorless liquid with a formulas.
    [Show full text]
  • Fire-Resistant Doped Fabric for Aircraft
    U. S. DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS RESEARCH PAPER RP788 Part of Journal of Research of the N.ational Bureau of Standards, Volume 14, May 1935 FIRE.RESISTANT DOPED FABRIC FOR AIRCRAFT By Gordon M. Kline ABSTRACT Cellulose nitrate dope now commonly used to cover the fabric on the wings and fuselage of airplanes is very flammable and its replacement by a less-hazardous product is desirable. The development of a satisfactory nonflammable dope by the use of natural and synthetic resins or mixtures of synthetic resins with cellu­ lose nitrate and cellulose acetate has not proved to be feasible. An airplane cover­ ing with very good resistance to ignition may be obtained by the application of a 3:7 boric-acid-borax mixture to airplane cloth and subsequently doping it with cellulose acetate. Cellulose acetate dope is now only moderately more expensi ve than cellulose nitrate dope. The cost difference becomes insignificant when the lower fire hazard resulting from the use of the much less flammable cellulose acetate dope is considered. CONTENTS Page I. Introduction ______ ___ __________________________________________ 575 II. Test methods _____ ____ __________________________________________ 576 l. Tautness of doped fabl'ic __________________________________ 576 2. Weight of doped fabric _____________ __________________ ____ 577 3. Flammability of doped fabric _ _ _ _ _ _ _ _ _ _ _ __ _ __ _ _ __ _ _ _ _ _ _ _ _ _ _ 577 III. Experimental work ____________ ____ ._____________________________ 578 l. Resins, casein, and cellulose derivative;; as dope consiituents __ 578 2. Mixtures of resins and cellulose derivatives as airplane dopes __ 579 3.
    [Show full text]
  • Canadian Museum of Flight Pilot Bill Findlay High-Fives One of His
    Getting Reacquainted – Museum visitor Alice Thew was part of Canadian Museum of Flight pilot Bill Findlay high-fives one of his the Canadian sisterhood that built DeHaviland Tiger Moth trainers youngest passengers after a flight in the Waco Cabin for the British Commonwealth Training Plan 75 years ago (Aircraft dope is a plasticised lacquer that is applied to fabric-covered aircraft). Alice possessed an amazing recall for the procedures and needles that were used to prepare the Tiger Moth for service over 75 years ago. As she deftly ran her hand over the Moth’s wings and carefully examined one of our stitching needles, she My position as museum manager has given me the reiterated many opportunity to meet many wonderful people from all fond memories of ages and walks in life. It is the greatest perk of the job. the “sisterhood” as she called it; the The museum recently hosted a bus tour of seniors from women war White Rock. One of those seniors was 94 year-old workers who Alice (Higgins) Thew, who was very interested in stitched and riveted viewing the Tiger Moth. Unfortunately, the Moth was Canada’s ships and still in the repair shop, but we wheeled Alice across the airplanes. Alice street to Valley Aero Structures where its wings are looked at me with a being reconstructed. When Alice spotted those wings, twinkle in her eye she lit up like a flashlight and began to explain how the and said, “Those Tiger Moth represented a big part of her life as a young Alice Thew demonstrates the technique years were the best woman.
    [Show full text]
  • AIR-TECH Complete Manual
    FABRIC COVERING PROCEDURE MANUAL Manual AT 101 Revision 8 AIR TECH COATINGS 1759 Staton Road • Lonoke, AR 72086 501-985-1484 • www.airtechcoatings.com FAA APPROVED FABRIC COVERING PROCEDURE MANUAL MANUAL AT 101 REVISION 8 ORIGINAL ISSUE DATE: SEPT. 19, 1989 COPYRIGHT: JUNE 1, 2015 AIRTECH COATINGS 1759 Staton Road Lonoke, AR. 72086 501- 985-1484 www.airtechcoatings.com FABRIC INSTALLATION MANUAL TABLE OF CONTENTS 1. INTRODUCTION 2. STATEMENT OF WARRANTY 3. SAFETY INFORMATION 4. KIT MATERIAL QUANTITIES 5. METAL PREPARATION 6. PREPARATION OF AIRFRAME 7. FABRIC INSTALLATION 8. PROCEDURE AIR TECH ADHESIVE 9. PROCEDURE TAUTENING FABRIC 10. RIB ATTACHMENTS & ACCESSORIES 11. SURFACE TAPE INSTALLATION 12. PRIMER APPLICATION PROCEDURES 13. PAINT APPLICATION PROCEDURES 14. REPAIR PROCEDURES 15. FAA APPROVALS/COMPLIANCE INFORMATION 16. APPENDIX FABRIC COVERING TIP SHEETS TECHNICAL DATA RF 4020 REV. 3 FABRIC WASH Procedure No. AT 101 Rev.7 Original Issue Date: Sept. 19, 1989 Date: February 14, 1994 INTRODUCTION To better serve the covering and coating needs of the aircraft owner Air Tech Coatings, Inc. was created. The advances in materials technology over the last twenty years have yielded improved alternatives to the old “Grade A” and dope systems. These improvements have been the introduction of heat shrinkable polyester fabrics, new adhesives, and new coating systems. They are rapidly becoming the standard for covering and the experience of thousands of aircraft owners who have used them are a great testimony to their ease of application, durability, and finish. Recovery of any fabric covered aircraft is to be accomplished under the authority of the Federal Aviation Administration (FAA).
    [Show full text]
  • A Brief History of Flying Clothing.Pdf
    Journal of Aeronautical History Paper No. 2014/01 A BRIEF HISTORY OF FLYING CLOTHING Dr. Graham Rood Farnborough Air Sciences Trust (FAST) Formerly Head of Man Machine Integration Department, Royal Aircraft Establishment, Farnborough Summary From the earliest days of flight, the aviator has needed some form of personal protection against the elements. The earliest form was a good tweed jacket, a hat and a pair of goggles; as the technology of aviation developed - flying faster, higher and longer - better and differing levels of protection were required. Conflict invariably brings rapid technological development and during the two World Wars, and the lingering Cold War, development of aircraft required complementary development of protective flying clothing. The later advent of electronics, computing and lightweight optics provided a new and additional role for flying clothing, particularly flying helmets, to supplement the weapons systems, primarily in the form of helmet mounted sights and displays. This paper looks briefly at the role and development of flying clothing, over the last century or so, in the protection of aircrew Introduction Over the last 100 years or so, aircrew or pilots have been the been airborne to direct aircraft operations, controlling the flight and performance, managing the aircraft systems, maintaining communications and providing, in war, much of the tactical intelligence. This approach has been highly successful and development of aircraft has been rapid, particularly during the two World Wars and the Cold War, when greater levels of finance for research, experimentation and development were available than in times of peace. There is, however, a downside to using a human in the loop.
    [Show full text]
  • AVI a TION SAFETY Digeslr
    t{ . , ....... 1,<."<4-~ A. N . \~ '- '( COMMONWEALTH OF AUSTRALIA I DEPARTMENT OF CIVIL AVl1\TION AVI A TION SAFETY DIGESlr No. 7 SEPTEMBER, 1956 Prepared by the Division of Published by Authority Printed by McBean Bros., 48 Rankins Road, Kensington. Accident Investigation and Analysis of the Director-General CONTENTS Page PART I-AVIATION NEWS AND VIEWS Misreading the Altimeter . 3 PART II-OVERSEAS ACCIDENTS DC-4 Fire in Flight . 5 DC-4 Ditching between Honolulu and Wake Island 6 Approach Accident, DC-6B, San Francisco Bay, California . 8 PART Ill-AUSTRALIAN ACCIDENTS Accident to DC-3 at Bourke, N.S.W. 10 I Accident to DC-3 on Instrument Approach to Cam- bridge (Hobart) Aerodrome 15 Take-off Accident near Stannum, N.S.W. 22 Helicopter Accident near Morehead, New Guinea 23 Collision with High Tension Wires . 23 DH-82 Mid-Air Collision near Werribee, Victoria 24 Fatal Stall in DH-82 . 25 Nose Heavy Norseman, New Guinea . 26 Proctor Lost in Cloud 26 DH -82 Take-off Accident . 27 Mid-Air Collision at Narromine, N.S.W. 2 7 PART IV-INCIDENT REPORTS Near Miss during l.F.R. Descent, Rome 29 The Need for Vigi lance in the Control Zone 29 V.F.R. and "Visual" Approaches . 30 Where you can assist AT.C. 31 • PART I AVIATION NEWS AND VIEWS Quiz Session pilots and non-pilot college students in r ead­ ing the 3-pointer altimeter. These persons Take a pencil, note the time, turn to page were allowed approximately 7 seconds for 32 and underneath each dial write the alti­ each reading.
    [Show full text]