DOCSLIB.ORG

Nanos... Picos... Minis... Micros... Microsatellite Markets

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Nanos... Picos... Minis... Micros... Microsatellite Markets Worldwide Satellite Magazine January 2013 SatMagazine Nanos... Picos... Minis... Micros... Microsatellite Markets Image: UKube-1 from Clyde Space SatMagazine. January 2013, Vol. 5, #9 Publishing Operations This Issue’s Authors Silvano Payne Publisher + Writer Michael Carlowicz, NASA Hartley G. Lesser Editorial Director Chris Forrester, Senior Contributing Editor Pattie Waldt Executive Editor Patrick French, NSR Jill Durfee Sales Director, Editorial Assistant Jos Heyman, Senior Contributing Editor Donald McGee Production Manager Hartley Lesser, Editorial Director Simon Payne Development Manager Jon Manley, Winegard Company Dan Makinster Technical Advisor Kay Sears, Intelsat General Corp. Chris Forrester Senior Contributing Editor Pattie Waldt, Executive Editor Alan Gottlieb Senior Contributing Editor Mary Jo Wagner Bob Gough Senior Contributing Editor Jos Heyman Senior Contributing Editor Giles Peeters Senior Contributing Editor Mike Antonovich Contributing Editor Index To Advertisers Richard Dutchik Contributing Editor Bert Sadtler Contributing Editor 2013 International Satellite Directory ............ Page 31 Advantech Wireless ........................................ Page 11 We reserve the right to edit all submitted materials to meet Arabsat Satellite .............................................Page 05 our content guidelines, as well as for grammar and spelling consistency. Articles may be moved to an alternative issue AVL Technologies ............................................Page 29 to accommodate publication space requirements or removed Comtech EF Data ............................................. Page 17 due to space restrictions. Submission of content does not constitute acceptance of said material by SatNews Publishers. Comtech Xicom Technology, Inc. ....................Page 27 Edited materials may, or may not, be returned to author and/ CPI Satcom Products ......................................Page 25 or company for review prior to publication. The views expressed in SatNews Publishers’ various publications do not necessarily Dubai World Trade Centre (CABSAT) ..............Page 53 reflect the views or opinions of SatNews Publishers. EADS Astrium Limited .....................................Page 03 All rights reserved. Global Link Productions, Inc. ..........................Page 21 All included imagery is courtesy of, and copyright to, the MITEQ, Inc. / MCL ..........................................Page 13 respective companies or named individuals. NewSat Limited ...............................................Page 09 Published monthly by Newtec CY .......................................................Page 07 SatNews Publishers 800 Siesta Way Northern Sky Research (NSR) ........................Page 37 Sonoma, CA 95476 USA Optimal Satcom .............................................. Page 15 Phone: (707) 939-9306 Fax: (707) 838-9235 Singapore Exhibition Services ........................ Page 61 © 2012 SatNews Publishers Teledyne Paradise Datacom LLC ..................... Page 51 W.B. Walton Enterprises ................................. Page 19 InfoBeam ‘Tis Scotland’s First (Clyde Space) ......................................................... Page 06 A Roaring Conclusion To 2012 (Arianespace) ......................................... Page 07 Solid To The Core (NASA) ....................................................................... Page 08 Taking A Transponder (SES) ................................................................... Page 08 Four Down, One To Go (Ball Aerospace) ................................................ Page 10 The Dream Becoming A Reality (Sierra Nevada Corp.) ........................... Page 10 OpEd: A New Approach (Intelsat General) ............................................. Page 12 Natural Resources Resources (Intelsat) ................................................ Page 12 Component Considerations (COM DEV International) ............................ Page 12 Airborne Access Renewed (ViaSat) ........................................................ Page 13 OOS + ADRs (Secure World Foundation) ................................................ Page 13 Making A Broad Reach (Moog) ............................................................... Page 14 Change That Date (SATCON) .................................................................. Page 14 Moving On Up (ARINC) ........................................................................... Page 14 2 SatMagazine — January 2013 SatMagazine January 2013, Vol. 5, #9 Features Expanding The View On July 22, 2012, exactEarth launched the latest satellite into the Page 16 exactView™ constellation. By Mary Jo Wagner Executive Spotlight: Lisa Scalpone, ViaSat Lisa Scalpone is Vice President Sales, Marketing, and Business Development Page 20 for Services at ViaSat Inc., and also is responsible for government affairs. Truly Educational Experiences... With Nanosats With the winners of the University Nanosat Program-7 to be announced Page 24 shortly... By Jos Heyman Executive Spotlight: Chris O’Dell, Hughes Network Systems Europe Chris heads up the sales and operating organization for the European market Page 32 of Hughes Network Systems, LLC. NSR Analysis: The FSS Market Leader Board Market share in the FSS segment can be measured in any number of ways Page 36 including total revenues or fleet size. By Patrick French Out Of The Blue + Into The Black The night is nowhere near as dark as most of us think. In fact, the Earth is Page 38 never really dark. By Michael Carlowicz VSAT: Five “Must-Have” System Characteristics Satellite communications have come a long way since Russian theorist Page 46 Konstantin Tsiolkovsky first conceived... By Jon Manely SatBroadcasting™—Futuresource: 4K Channels In 2014 Page 50 Research consultancy Futuresource expects a number of broadcasters to launch 4K channels during 2014. By Chris Forrester Executive Spotlight: Jim Armor, ATK Jim Armor has been Vice President of Strategy & Business Development for Page 54 Spacecraft Systems and Engineering Services at ATK Space Systems, Inc. PIONEERING: Sustaining U.S. Leadership In Space On December 4th, the Space Foundation released PIONEERING: Sustaining Page 58 U.S. Leadership in Space... 4 SatMagazine — January 2013 InfoBeam As well as the ‘Tis Scotland’s First platform and payload elements Scotland’s first satellite The UKube-1 of the mission, will be launched from a nanosatellite has UKube-1 is being Russian Soyuz-2 rocket in been designed and supported by March of 2013. manufactured by three UK Ground UKube-1, built by Clyde Space Clyde Space at their Stations. Led in Glasgow, is now completing high-tech facility at by the STFC final testing at the company’s the West of Scotland Rutherford Appleton headquarters before making Science Park. Laboratory’s the journey to the Baikonur The satellite is one Ground Segment in Cosmodrome in Kazakhstan for of the most advanced Oxfordshire, these the launch. of its kind and the crucial elements mission is the pilot will provide the for a collaborative, link to the orbiting national CubeSat spacecraft, as well program bringing as full planning of together UK industry the operations. and academia to fly The supporting educational packages, ground stations test new technologies are provided by and carry out new Dundee and space research quickly Strathclyde and efficiently. Universities. Payloads in The university UKube-1 include of Strathclyde the first GPS device groundstation was aimed at measuring installed by Clyde plasmaspheric space Space during an weather, a camera earlier phase of that will take images the spacecraft of the Earth and test development. # Steve Greenwood of Clyde the effect of radiation Space receives the AMSAT-UK on space hardware FUNcube-2 boards that will be using a new generation incorporated into the of imaging sensor UKube-1 nanosatellite and an experiment to demonstrate the feasibility of using cosmic radiation to Confirming that agreement improve the security had been reached for the of communications Russian rocket to carry UKube-1, satellites and to Clyde Space CEO Craig Clark, flight test lower cost said: “UKube-1 aims to be the electronic systems. first of many nanosatellites It will also carry a produced at Clyde Space, and payload made up of five is a fantastic mission for us to experiments that UK demonstrate our capabilities as students and the public a spacecraft mission lead. I’m can interact with and proud of the team here at Clyde an outreach program Space in achieving such a critical that also allows school milestone in the mission.” children to interact with the spacecraft. UKube-1 is a UK Space Agency mission. The mission has been funded jointly by Clyde Space (mission prime) and a number of funding partners including the UK Space Agency, the Science and Technology Facilities Council, the Technology Strategy Board and there has also been support from Scottish Enterprise. 6 SatMagazine — January 2013 A Roaring Conclusion To 2012... Arianespace’s Ariane 5 The Arianespace launcher family flight with the Skynet 5D missions performed from French and Mexsat Bicentenario Guiana this year were composed satellite passengers has of seven heavy-lift Ariane 5 wrapped up another flights, two with the medium-lift busy year of company Soyuz, and the lightweight Vega’s launch activity. inaugural launch. During 2012, the Arianespace There was also an additional launcher family performed a Soyuz mission, performed from total of 10 missions from the the Baikonur Cosmodrome in Spaceport in French
Load more

Recommended publications
  • Rocket Propulsion Fundamentals 2
    https://ntrs.nasa.gov/search.jsp?R=20140002716 2019-08-29T14:36:45+00:00Z Liquid Propulsion Systems – Evolution & Advancements Launch Vehicle Propulsion & Systems LPTC Liquid Propulsion Technical Committee Rick Ballard Liquid Engine Systems Lead SLS Liquid Engines Office NASA / MSFC All rights reserved. No part of this publication may be reproduced, distributed, or transmitted, unless for course participation and to a paid course student, in any form or by any means, or stored in a database or retrieval system, without the prior written permission of AIAA and/or course instructor. Contact the American Institute of Aeronautics and Astronautics, Professional Development Program, Suite 500, 1801 Alexander Bell Drive, Reston, VA 20191-4344 Modules 1. Rocket Propulsion Fundamentals 2. LRE Applications 3. Liquid Propellants 4. Engine Power Cycles 5. Engine Components Module 1: Rocket Propulsion TOPICS Fundamentals • Thrust • Specific Impulse • Mixture Ratio • Isp vs. MR • Density vs. Isp • Propellant Mass vs. Volume Warning: Contents deal with math, • Area Ratio physics and thermodynamics. Be afraid…be very afraid… Terms A Area a Acceleration F Force (thrust) g Gravity constant (32.2 ft/sec2) I Impulse m Mass P Pressure Subscripts t Time a Ambient T Temperature c Chamber e Exit V Velocity o Initial state r Reaction ∆ Delta / Difference s Stagnation sp Specific ε Area Ratio t Throat or Total γ Ratio of specific heats Thrust (1/3) Rocket thrust can be explained using Newton’s 2nd and 3rd laws of motion. 2nd Law: a force applied to a body is equal to the mass of the body and its acceleration in the direction of the force.
    [Show full text]
  • L AUNCH SYSTEMS Databk7 Collected.Book Page 18 Monday, September 14, 2009 2:53 PM Databk7 Collected.Book Page 19 Monday, September 14, 2009 2:53 PM
    databk7_collected.book Page 17 Monday, September 14, 2009 2:53 PM CHAPTER TWO L AUNCH SYSTEMS databk7_collected.book Page 18 Monday, September 14, 2009 2:53 PM databk7_collected.book Page 19 Monday, September 14, 2009 2:53 PM CHAPTER TWO L AUNCH SYSTEMS Introduction Launch systems provide access to space, necessary for the majority of NASA’s activities. During the decade from 1989–1998, NASA used two types of launch systems, one consisting of several families of expendable launch vehicles (ELV) and the second consisting of the world’s only partially reusable launch system—the Space Shuttle. A significant challenge NASA faced during the decade was the development of technologies needed to design and implement a new reusable launch system that would prove less expensive than the Shuttle. Although some attempts seemed promising, none succeeded. This chapter addresses most subjects relating to access to space and space transportation. It discusses and describes ELVs, the Space Shuttle in its launch vehicle function, and NASA’s attempts to develop new launch systems. Tables relating to each launch vehicle’s characteristics are included. The other functions of the Space Shuttle—as a scientific laboratory, staging area for repair missions, and a prime element of the Space Station program—are discussed in the next chapter, Human Spaceflight. This chapter also provides a brief review of launch systems in the past decade, an overview of policy relating to launch systems, a summary of the management of NASA’s launch systems programs, and tables of funding data. The Last Decade Reviewed (1979–1988) From 1979 through 1988, NASA used families of ELVs that had seen service during the previous decade.
    [Show full text]
  • Development of a Reliable Performance Gas Generator of 75 Tonf-Class Liquid Rocket Engine for the Korea Space Launch Vehicle II
    DOI: 10.13009/EUCASS2019-521 8TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS) Development of a Reliable Performance Gas Generator of 75 tonf-class Liquid Rocket Engine for the Korea Space Launch Vehicle II Byoungjik Lim*, Munki Kim*, Donghyuk Kang*, Hyeon-Jun Kim*, Jong-Gyu Kim*, and Hwan-Seok Choi* *Korea Aerospace Research Institute 169-84, Gwahak-ro, Yuseong-Gu Daejeon, 34133, South Korea [email protected] Abstract In this paper, development history and result of a reliable performance gas generator of 75 tonf-class liquid rocket engine is described. Based on the experience acquired from the 30 tonf-class gas generator development, the almost identical concept was adopted to 75 tonf-class gas generator such as a coaxial swirl injector and a regeneratively cooled combustion chamber. During the entire development process using the full-scale and subscale technological demonstration model and development model up to now, combustion tests of over 430 times and cumulative time of over 17 700 seconds have been carried out for a 75 tonf-class gas generate. Now the 75 tonf-class fuel-rich gas generator shows very reliable and reproducible characteristics throughout the entire lifetime including the flight test which was done with the test launch vehicle in November 2018. Thus, it can be said that the development of a 75 tonf-class fuel rich gas generator which will be used in Korea first independent space launch vehicle, KSLV-II was finished successfully. 1. Introduction As a leading institute for technology which is related with space launch vehicle and a national space development agency in the Republic of KOREA, the Korea Aerospace Research Institute (KARI) has been continuously researching and developing technology related to space launch vehicles since establishment in 1989.
    [Show full text]
  • Materials for Liquid Propulsion Systems
    https://ntrs.nasa.gov/search.jsp?R=20160008869 2019-08-29T17:47:59+00:00Z CHAPTER 12 Materials for Liquid Propulsion Systems John A. Halchak Consultant, Los Angeles, California James L. Cannon NASA Marshall Space Flight Center, Huntsville, Alabama Corey Brown Aerojet-Rocketdyne, West Palm Beach, Florida 12.1 Introduction Earth to orbit launch vehicles are propelled by rocket engines and motors, both liquid and solid. This chapter will discuss liquid engines. The heart of a launch vehicle is its engine. The remainder of the vehicle (with the notable exceptions of the payload and guidance system) is an aero structure to support the propellant tanks which provide the fuel and oxidizer to feed the engine or engines. The basic principle behind a rocket engine is straightforward. The engine is a means to convert potential thermochemical energy of one or more propellants into exhaust jet kinetic energy. Fuel and oxidizer are burned in a combustion chamber where they create hot gases under high pressure. These hot gases are allowed to expand through a nozzle. The molecules of hot gas are first constricted by the throat of the nozzle (de-Laval nozzle) which forces them to accelerate; then as the nozzle flares outwards, they expand and further accelerate. It is the mass of the combustion gases times their velocity, reacting against the walls of the combustion chamber and nozzle, which produce thrust according to Newton’s third law: for every action there is an equal and opposite reaction. [1] Solid rocket motors are cheaper to manufacture and offer good values for their cost.
    [Show full text]
  • Fastrac Engine: Understanding Technical Implications of Programmatic Decisions
    Fastrac Engine: Understanding Technical Implications of Programmatic Decisions Mary Beth Koelbl Katherine Van Hooser 7/28/15 Outline I. Introduction and Objective of Presentation II. Background and Landscape A. Engine Developments B. Fastrac Origins and the Government-Led Approach C. Implementation III. Transition from Manned Space Flight to Faster Better Cheaper A. Fastrac Features B. Lessons Learned IV. Fastrac History V. Program Legacy Background and Landscape • There was significant hiring at MSFC in the late 1980’s and early 1990’s. The center was immersed in Challenger Return-to-Flight and Shuttle upgrades, but little else • By the mid 1990’s, recognizing the need to train the new generation of engineers who were lacking in development expertise, MSFC management decided to take action o Propulsion and Materials management knew that engine developments were difficult and costly o They needed to create an opportunity themselves so they focused on in-house designed component technologies o Simplex Turbopump and 40k Thrust Chamber Assembly began; focused on 15 to 40k thrust applications such as Bantam Background and Landscape • In the Mid 1990s, leveraging the component technology effort, an in- house rocket engine design and development project was initiated • The Objectives were to o Demonstrate low cost engine in a faster, better, cheaper way of doing business. Including utilizing non-traditional suppliers o Give the younger propulsion engineers real hands-on hardware and cradle-to-grave design experience. • A test-bed / prototype engine design and hardware project, conducted entirely in-house, was chosen as an effective way of accomplishing these objectives • Initially envisioned a test-bed for the Bantam Booster, low cost design with a 2 Year Development; eventually became a 60k engine design First and Only Large Rocket Engine Developed in-House at NASA 4 Background and Landscape System Req.
    [Show full text]
  • The Annual Compendium of Commercial Space Transportation: 2012
    Federal Aviation Administration The Annual Compendium of Commercial Space Transportation: 2012 February 2013 About FAA About the FAA Office of Commercial Space Transportation The Federal Aviation Administration’s Office of Commercial Space Transportation (FAA AST) licenses and regulates U.S. commercial space launch and reentry activity, as well as the operation of non-federal launch and reentry sites, as authorized by Executive Order 12465 and Title 51 United States Code, Subtitle V, Chapter 509 (formerly the Commercial Space Launch Act). FAA AST’s mission is to ensure public health and safety and the safety of property while protecting the national security and foreign policy interests of the United States during commercial launch and reentry operations. In addition, FAA AST is directed to encourage, facilitate, and promote commercial space launches and reentries. Additional information concerning commercial space transportation can be found on FAA AST’s website: http://www.faa.gov/go/ast Cover art: Phil Smith, The Tauri Group (2013) NOTICE Use of trade names or names of manufacturers in this document does not constitute an official endorsement of such products or manufacturers, either expressed or implied, by the Federal Aviation Administration. • i • Federal Aviation Administration’s Office of Commercial Space Transportation Dear Colleague, 2012 was a very active year for the entire commercial space industry. In addition to all of the dramatic space transportation events, including the first-ever commercial mission flown to and from the International Space Station, the year was also a very busy one from the government’s perspective. It is clear that the level and pace of activity is beginning to increase significantly.
    [Show full text]
  • 발사체 소형엔진용 적층제조 기술 동향 Technology Trends
    Journal of the Korean Society of Propulsion Engineers Vol. 24, No. 2, pp. 73-82, 2020 73 Technical Paper DOI: https://doi.org/10.6108/KSPE.2020.24.2.073 발사체 소형엔진용 적층제조 기술 동향 이금오 a, * ․ 임병직 a ․ 김대진 b ․ 홍문근 c ․ 이기주 a Technology Trends in Additively Manufactured Small Rocket Engines for Launcher Applications Keum-Oh Lee a, * ․ Byoungjik Lim a ․ Dae-Jin Kim b ․ Moongeun Hong c ․ Keejoo Lee a a Future Launcher R&D Program Office, Korea Aerospace Research Institute, Korea b Turbopump Team, Korea Aerospace Research Institute, Korea c Launcher Propulsion Control Team, Korea Aerospace Research Institute, Korea * Corresponding author. E-mail: [email protected] ABSTRACT Additively manufactured, small rocket engines are perhaps the focal activities of space startups that are developing low-cost launch vehicles. Rocket engine companies such as SpaceX and Rocket Lab in the United States, Ariane Group in Europe, and IHI in Japan have already adopted the additive manufacturing process in building key components of their rocket engines. In this paper on technology trends, an existing valve housing of a rocket engine is chosen as a case study to examine the feasibility of using additively manufactured parts for rocket engines. 초 록 저비용 발사체를 개발 중인 많은 스타트업들이 소형 로켓 엔진을 확보하기 위해 적층제조 기법을 개발 중이다. 또한, 미국의 SpaceX, Rocket Lab 등을 비롯하여, 유럽의 Ariane Group, 일본의 IHI와 같은 엔진 제작업체들은 로켓 엔진의 주요부품에 적층제조를 채택하여 생산하고 있다. 본 논문에서 는 적층제작기법의 타당성을 조사하기 위해서 기존 로켓 엔진의 밸브 하우징을 적층제조 하는 사례 연구 결과를 소개한다. Key Words: Additive Manufacturing(적층제조), 3D Printing(3D 프린팅), Liquid Rocket Engine(액체 로켓엔진), Thrust Chamber(연소기), Turbopump(터보펌프), Valve(밸브) 1.
    [Show full text]
  • Los Motores Aeroespaciales, A-Z
    Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 < aeroteca.com > Depósito Legal B 9066-2016 Título: Los Motores Aeroespaciales A-Z. © Parte/Vers: 1/12 Página: 1 Autor: Ricardo Miguel Vidal Edición 2018-V12 = Rev. 01 Los Motores Aeroespaciales, A-Z (The Aerospace En- gines, A-Z) Versión 12 2018 por Ricardo Miguel Vidal * * * -MOTOR: Máquina que transforma en movimiento la energía que recibe. (sea química, eléctrica, vapor...) Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 Este facsímil es < aeroteca.com > Depósito Legal B 9066-2016 ORIGINAL si la Título: Los Motores Aeroespaciales A-Z. © página anterior tiene Parte/Vers: 1/12 Página: 2 el sello con tinta Autor: Ricardo Miguel Vidal VERDE Edición: 2018-V12 = Rev. 01 Presentación de la edición 2018-V12 (Incluye todas las anteriores versiones y sus Apéndices) La edición 2003 era una publicación en partes que se archiva en Binders por el propio lector (2,3,4 anillas, etc), anchos o estrechos y del color que desease durante el acopio parcial de la edición. Se entregaba por grupos de hojas impresas a una cara (edición 2003), a incluir en los Binders (archivadores). Cada hoja era sustituíble en el futuro si aparecía una nueva misma hoja ampliada o corregida. Este sistema de anillas admitia nuevas páginas con información adicional. Una hoja con adhesivos para portada y lomo identifi caba cada volumen provisional. Las tapas defi nitivas fueron metálicas, y se entregaraban con el 4 º volumen. O con la publicación completa desde el año 2005 en adelante. -Las Publicaciones -parcial y completa- están protegidas legalmente y mediante un sello de tinta especial color VERDE se identifi can los originales.
    [Show full text]
  • On the X-34 FASTRAC – Memorandums of Misunderstanding
    https://ntrs.nasa.gov/search.jsp?R=20160005660 2019-08-31T03:30:34+00:00Z View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by NASA Technical Reports Server National Aeronautics and Space Administration NASA Case Study MSFC-CS1001-1 By Lakiesha V. Hawkins and Jim E. Turner Rev. 09/15/15 On the X-34 FASTRAC – Memorandums of Misunderstanding Engineers at MSFC designed, developed, and tested propulsion systems that helped launch Saturn I, IB, and V boosters for the Apollo missions. After the Apollo program, Marshall was responsible for the design and development of the propulsion elements for the Shuttle launch vehicle, including the solid rocket boosters, external tank and main engines. Each of these systems offered new propulsion technological challenges that pushed engineers and administrators beyond Saturn. The technical challenges presented by the development of each of these propulsion systems helped to establish and sustain a culture of engineering conservatism and was often accompanied by a deep level of penetrationi into contractors that worked on these systems. The FASTRAC Engine Project Figure 1 FASTRAC engine (NASA) In the middle of the 1990s NASA was pushing to lower the cost and development time of access to space. One of the targets to lower barriers to space access was the cost of propulsion systems. NASA sought to prove to itself and to the propulsion community that a new propulsion system could be built much cheaper and much faster than in the past. In fact, the propulsion community within NASA MSFC sought to go from a ‘clean sheet’ engine design to having the engine in a test stand in 2 years.
    [Show full text]
  • The Annual Compendium of Commercial Space Transportation: 2017
    Federal Aviation Administration The Annual Compendium of Commercial Space Transportation: 2017 January 2017 Annual Compendium of Commercial Space Transportation: 2017 i Contents About the FAA Office of Commercial Space Transportation The Federal Aviation Administration’s Office of Commercial Space Transportation (FAA AST) licenses and regulates U.S. commercial space launch and reentry activity, as well as the operation of non-federal launch and reentry sites, as authorized by Executive Order 12465 and Title 51 United States Code, Subtitle V, Chapter 509 (formerly the Commercial Space Launch Act). FAA AST’s mission is to ensure public health and safety and the safety of property while protecting the national security and foreign policy interests of the United States during commercial launch and reentry operations. In addition, FAA AST is directed to encourage, facilitate, and promote commercial space launches and reentries. Additional information concerning commercial space transportation can be found on FAA AST’s website: http://www.faa.gov/go/ast Cover art: Phil Smith, The Tauri Group (2017) Publication produced for FAA AST by The Tauri Group under contract. NOTICE Use of trade names or names of manufacturers in this document does not constitute an official endorsement of such products or manufacturers, either expressed or implied, by the Federal Aviation Administration. ii Annual Compendium of Commercial Space Transportation: 2017 GENERAL CONTENTS Executive Summary 1 Introduction 5 Launch Vehicles 9 Launch and Reentry Sites 21 Payloads 35 2016 Launch Events 39 2017 Annual Commercial Space Transportation Forecast 45 Space Transportation Law and Policy 83 Appendices 89 Orbital Launch Vehicle Fact Sheets 100 iii Contents DETAILED CONTENTS EXECUTIVE SUMMARY .
    [Show full text]
  • Prototype Design and Mission Analysis for a Small Satellite Exploiting Environmental Disturbances for Attitude Stabilization
    Calhoun: The NPS Institutional Archive Theses and Dissertations Thesis and Dissertation Collection 2016-03 Prototype design and mission analysis for a small satellite exploiting environmental disturbances for attitude stabilization Polat, Halis C. Monterey, California: Naval Postgraduate School http://hdl.handle.net/10945/48578 NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS PROTOTYPE DESIGN AND MISSION ANALYSIS FOR A SMALL SATELLITE EXPLOITING ENVIRONMENTAL DISTURBANCES FOR ATTITUDE STABILIZATION by Halis C. Polat March 2016 Thesis Advisor: Marcello Romano Co-Advisor: Stephen Tackett Approved for public release; distribution is unlimited THIS PAGE INTENTIONALLY LEFT BLANK REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704–0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instruction, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC 20503. 1. AGENCY USE ONLY 2. REPORT DATE 3. REPORT TYPE AND DATES COVERED (Leave blank) March 2016 Master’s thesis 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS PROTOTYPE DESIGN AND MISSION ANALYSIS FOR A SMALL SATELLITE EXPLOITING ENVIRONMENTAL DISTURBANCES FOR ATTITUDE STABILIZATION 6. AUTHOR(S) Halis C. Polat 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING Naval Postgraduate School ORGANIZATION REPORT Monterey, CA 93943-5000 NUMBER 9.
    [Show full text]
  • 2013 Commercial Space Transportation Forecasts
    Federal Aviation Administration 2013 Commercial Space Transportation Forecasts May 2013 FAA Commercial Space Transportation (AST) and the Commercial Space Transportation Advisory Committee (COMSTAC) • i • 2013 Commercial Space Transportation Forecasts About the FAA Office of Commercial Space Transportation The Federal Aviation Administration’s Office of Commercial Space Transportation (FAA AST) licenses and regulates U.S. commercial space launch and reentry activity, as well as the operation of non-federal launch and reentry sites, as authorized by Executive Order 12465 and Title 51 United States Code, Subtitle V, Chapter 509 (formerly the Commercial Space Launch Act). FAA AST’s mission is to ensure public health and safety and the safety of property while protecting the national security and foreign policy interests of the United States during commercial launch and reentry operations. In addition, FAA AST is directed to encourage, facilitate, and promote commercial space launches and reentries. Additional information concerning commercial space transportation can be found on FAA AST’s website: http://www.faa.gov/go/ast Cover: The Orbital Sciences Corporation’s Antares rocket is seen as it launches from Pad-0A of the Mid-Atlantic Regional Spaceport at the NASA Wallops Flight Facility in Virginia, Sunday, April 21, 2013. Image Credit: NASA/Bill Ingalls NOTICE Use of trade names or names of manufacturers in this document does not constitute an official endorsement of such products or manufacturers, either expressed or implied, by the Federal Aviation Administration. • i • Federal Aviation Administration’s Office of Commercial Space Transportation Table of Contents EXECUTIVE SUMMARY . 1 COMSTAC 2013 COMMERCIAL GEOSYNCHRONOUS ORBIT LAUNCH DEMAND FORECAST .
    [Show full text]