CURRIES Price Book

Issued May 2018

Revised October 2019

i Index General Information May, 2018

DESCRIPTION PAGE(S) Policies 1 Policies Continued 2 General Information 3 Doors 3 Frames 3 Component Parts for Frames 3 Door and Frame Order Conditions 3 Trademark Use Policy 4 Weights — Doors 5, 6 607S Series 5 707S Series 5 727S Series 5 737S Series 5 747S Series 6 757S Series 6 847S Series 6 857S Series 6 Factory Glazed Doors 7 Weights — KD Frames 8, 9 M Profile 8 C Profile 9 C-CM Profile 9 Weights — Frame Components 10, 11 M Profile 10 C Profile 11 C-CM Profile 11 Weights — CCW 12 Swift-Pac Doors and Frames 13 Notes General Information

May, 2018 1 Policies General Information May, 2018 YOUR CURRIES DISTRIBUTOR MANUAL

You will find this manual an important source of information for CURRIES products. As new information is developed, or as changes occur, the new material will be mailed directly to you. If you will insert the new pages as received, your CURRIES Manual will always be current .

POLICIES TERMS WARRANTY CURRIES reserves the right to refuse purchase orders and is not bound We warrant our products against defects in workmanship to honor them unless they have been accepted at the Mason City, and materials for a period of one year as follows: Iowa, home office. CURRIES reserves the right to sell or not to sell (a) There are no warranties, express or implied, which extend to a firm for any reason which in their sole discretion seems appropriate. beyond those described herein, and there is no implied Terms are 2% ten days and net 30 days from date of invoice. warranty or merchantability. (b) If our products should prove to be defective, our only PRICES responsibility will be to either repair or replace the defective All prices are subject to change without notice and are not guaranteed. item(s), and we will have no liability or obligation for any damages of any kind beyond such repair or replacement. QUOTATIONS (c) Our obligation to repair or replace any defective item Quotations are based on market conditions and are subject to terminates one year after the product has been delivered by acceptance within the terms stated on the quotation. Quotations are us to the customer, and also terminates at any time anyone subject to revisions or cancellations should conditions warrant. other than han our company performs any work of repair, service or replacement on the item without our prior written CHANGES OR CANCELLATIONS consent. From the time an order for manufactured products is received and (d) We assume no liability to pay any costs of labor or material through the coordination phase it may be changed or cancelled for repair, service or replacement of any CURRIES product without charge. which has been incurred by anyone other than us. (e) CURRIES is committed to providing the highest quality Once the order has been scheduled for production it cannot be products and services to its customers as possible. Errors can changed or cancelled, the product belongs to the customer. If occur on occasion . We request our distributors to act as “final” requested, we will not ship the product, however, the customer will quality control on our hollow metal. A simple double check be invoiced the full amount for the material. A Quick Ship Order, due procedure by an assembly person prior to modifying a door to the nature of the process cannot be changed or cancelled or welding a frame should be performed on every unit of after it has been scheduled, which can be a matter of hours after product that leaves a distributor’s place of business. This we receive it. simple action can prevent a considerable amount of potential field problems. MINIMUM INVOICE Purchase orders amounting to less than $50.00 net will be RETURNS subject to an additional net charge of $15.00 over No goods may be returned without written approval from the and above the net order amount. home office in Mason City, Iowa. Replacement will be made only after a thorough investigation of the product is made, CLAIMS and investigation reveals that it is defective or was shipped Claims for price adjustments must be submitted in writing to the in error. All returns must refer to the return authorization letter. Mason City, Iowa, home office within 30 days from date of invoice in question. Claims for shortages or FREIGHT incorrectly filled orders must be made in writing within All goods are shipped F .O .B . Point of Origin and become 10 days after receipt of shipment. the customer’s property when they pass into the hands of the transportation company . Prepay and add programs are available for LTL and truckload shipping from the factory locations. 2 Policies (continued) General Information May, 2018

POOL SHIPPING GLASS POCKET DIMENSIONS Freight shipments may be pool shipped together with other CURRIES standard glazing pocket dimensions for doors distributor orders to various regions of the country. and frames are detailed in our Technical Data Manual. Pool shipment program descriptions are available Unless specified otherwise we will manufacture products in from the factory. accordance with these details. We can manufacture many other variations and combinations based on detailed DELIVERY drawings which may be submitted to CURRIES prior to Scheduled shipping dates are based on our best estimate, fabrication of products. and are not guaranteed. FINISH PAINT COMPATIBILITY PENALTY CLAUSES CURRIES uses modern, high quality prime paints that comply We will not accept purchase orders with a penalty or late with many published industry standards. The primer we delivery provison. use is compatible with many of the finish paint systems used in the construction industry. MISCELLANEOUS We do not, however, make any warranty as to the The Curries Distributor Manual and price lists are the property compatibility of our primer with any finish paint due to of Curries and are issued subject to recall. variations that can occur during application of the finish paint by the painter. Questions on compatibility of our prime HARDWARE TEMPLATING paint with finish paint can be addressed by submitting CURRIES strives to update our records for manufacturing manufacturers’ specifications for the finish paint to CURRIES. products on a daily basis . We are constantly receiving template revisions and updates from the BHMA member hardware CODE SPECIFICATION COMPLIANCE manufacturers and add this information to our files when CURRIES maintains industry contacts to assure product received. We produce templated hardware preparations compliance to national building code standards, ADA within ANSI guidelines and the manufacturer’s recommendations. requirements, and fire protection codes. Our products can It is the Distributor’s responsibility to provide templates to comply with most published fire standards, performance CURRIES when the manufacturer of a piece of standards, and general construction standards when hardware has not published templates or out of date properly ordered from the factory. We can not be responsible hardware is being used. for regional variations imposed by a local authority having CURRIES cannot be responsible for non-templated or out jurisdiction or other interpretations of specifications that are of date preparations without a physical sample of unknown to us prior to furnishing materials to a job. the hardware submitted to CURRIES. GALVANIZED PRODUCTS HARDWARE LOCATIONS/OTHER MANUFACTURERS Hot dipped zinc coated products, galvannealed (A60) or CURRIES will manufacture products to other manufacturers’ galvanized (G90) are available with most CURRIES’ standard hardware locations and bottom undercuts (except products . Check with the factory for availability and lead undercut on 607 doors) according to the current issue of time of obtaining G Class zinc coated products . We comply SDI 129 and our developed list of other manufacturers with SDI 112-97 and do not imply corrosion free products locations . When you specify another manufacturer’s are available. standard locations on the order form, these are the locations we will use for manufacturing. It is the Distributor’s STORAGE AND EXPOSURE responsibility to ensure that these locations are the correct CURRIES’ prime paint complies with ANSI/SDI and other ones for the application . We do not receive notification from published industry standards for salt spray and humidity other manufacturers when they change their standard chamber testing. Proper storage of doors and frames in a locations . Special caution is recommended when warehouse or at a jobsite is essential to prevent corrosion ordering material to fit existing doors or frames because before the finish paint is applied. They must be kept dry and manufacturers do change their standards. CURRIES will protected from exposure to the elements. We recommend supply a copy of SDI 129 and our developed hardware that the finish paint coat be applied soon after installation. locations list upon request. Contact the factory for hardware CURRIES cannot be held responsible for corrosion that locations other than what CURRIES publishes as standard. occurs on prime painted doors and frames either as a result of improper storage or from prolonged periods of exposure of installed components to conditions that introduce moisture on the product.

CURRIES Division of ASSA ABLOY Door Group, LLC 3 General Information General Information May, 2018

GENERAL INFORMATION - DOORS FIRE LABEL PRODUCTS Doors are individually wrapped and prime painted, with the exception CURRIES products comply with most current fire listing test of stainless steel doors (which are unpainted), and other doors as criteria U.L. 10C. noted in this manual (which are not individually wrapped). DOOR AND FRAME ORDER CONDITIONS Doors over 4’ wide and/or 8’ high will be crated. Subject to the following requirements and exception: 1 . Must be written up as one order on CURRIES Order Forms Non-label pairs of doors consist of two single doors with standard 2 . Given one order number hardware preparations as listed. We recommend that an 3 . Shipped to one destination astragal be used with all pairs of doors with the exception of pairs 4 . One Bill of Lading with push-pull hardware. 5 . Can be billed on one invoice 6 . Type charge for “Prefinish-Paint Color” is never waived Base prices of doors include standard hardware preparations.

See individual price lists and/or the special hardware preparations section for the cost of non-standard hardware preparations. Refer to the Engineered Door and Frame Section for special or engineered doorpreparations.

GENERAL INFORMATION - FRAMES Standard frame profiles include Masonry (M), Masonry cased opening (MK), Masonry Double Egress (DEM), Drywall (C), Drywall cased opening (CK), and Drywall Masonry (CM). Available equal or unequal rabbet M, C, or CM or single rabbet G, CG, or CMG (standard profile limitations are detailed in Technical Data Manual). All standard frames are die mitered, knocked down, prime painted or as otherwise noted in the manual. Spreader bars are not included, standard jamb anchors and base anchors are included in frame base prices unless noted otherwise. Refer to Engineered Door & Frames section of this manual for special requirements. Non-Standard hardware requirements, refer to Special Hardware Preps section of this manual.

COMPONENT PARTS FOR FRAMES (CCW — Custom Profiles — Stainless Steel)

Flush stick components available cut to length per job requirements. Components are prime painted and assembled, ready for shop modification for frame fabrication. Standard and custom profiles available (see Technical Data Manual) for most assembly requirements. Contact factory for limitations on custom profiles . Profiles that require filler plate attaching member members will be assembled with the exposed edge seam. Filled profile seams are available with welded frames only when indicated. Stainless steel components and assemblies available — see special pages pertaining to stainless steel. Frame members are fabricated from cold rolled or galvanneal steel (as specified) of either 12, 14, 16, or 18 gauge steel . Stainless steel is standard 304 #4 satin finish, 14 or 16 gauge (as specified). 4 Trademark Use Policy General Information May, 2018

Trademark Use Policy ASSA ABLOY Americas ASSA ABLOY reserves the right to review Approved Reseller’s The following policy (“Policy”) of ASSA ABLOY Americas (“ASSA usage of ASSA ABLOY Marks at any time and may: ABLOY”), and all of its affiliated group companies (collectively, the “Group Companies”), applies to the use of certain intellectual property (a) require changes to the use of ASSA ABLOY Marks at any of all such Group Companies, including all trademarks, names, logos, time in its sole discretion, which changes must be implemented product images, and related information(the “ASSA ABLOY Marks”). within 30 days of written notice to Approved Reseller; ASSA ABLOY Marks are proprietary and critical to the success (b) condition the use of ASSA ABLOY Marks on ASSA ABLOY’s of ASSA ABLOY and the Group Companies, and may only be used prior approval of such use, which approval may be withheld in strict compliance with this Policy. in its sole discretion; (c) revoke permission to use ASSA ABLOY Marks at any time This Policy covers any person or entity reselling any for any or no reason upon 30 days prior written notice to product of any Group Company with the consent of such Group Approved Reseller; and Company (each, and “Approved Reseller”). Each Approved (d) revoke permission to use ASSA ABLOY Marks immediately Reseller has a non-exclusive right to use certain of the ASSA ABLOY upon notice to Approved Reseller in the event Approved Marks relating to any of the Group Companies for which it is an Reseller is in violation of this Policy, or of any other Approved Reseller, subject to the following conditions: agreement with ASSA ABLOY or any Group Company

(1) Approved Reseller’s use of ASSA ABLOY Marks must be truthful, Approved Reseller’s right to use ASSA ABLOY Marks in no way fair, and not misleading: conveys to Approved Reseller any proprietary or economic (2) Approved Reseller’s advertising must clearly indicate that it is interest in any ASSA ABLOY Marks. advertising of the Approved Reseller, and is not advertising of ASSA ABLOY; Use of ASSA ABLOY Marks in violation of this Policy may result (3) Approved Reseller may not use any ASSA ABLOY Marks in severe civil and criminal liabilities . ASSA ABLOY will vigorously as part of or in connection with a domain name; enforce this Policy by seeking all appropriate legal remedies, (4) Approved Reseller’s advertising must not imply or suggest an including, but not limited to, pecuniary damages and injunctive association between the Approved Reseller and ASSA ABLOY relief. ther than that of buyer and seller; (5) Approved Reseller’s use of ASSA ABLOY Marks must be a For trademark questions please contact: positive representation of ASSA ABLOY, the Group Companies, Trent Turner and their products; Technical Marketing Manager (6) Approved Reseller’s trade name must be more predominant on ASSA ABLOY Door Group Approved Reseller’s advertising than the ASSA ABLOY Marks; (7) Approved Reseller’s use of ASSA ABLOY Marks must include the Phone: 731 686 4289 trademark symbol ® or TM, as appropriate, along with the following E-mail: trent .turner@assaabloy .com trademark legend printed in legible text on the Web page or document containing ASSA ABLOY Marks:“[describe ASSA ABLOY Marks] are trademarks or registered trademarks of ASSA ABLOY, Inc . or one of its affiliates in the United States and other countries .”, (8) Approved Reseller must not make modifications of any ASSA ABLOY Marks; and (9) Approved Reseller may use only ASSA ABLOY Marks associated with the Group Companies for which it is an Approved Reseller (e .g ., and Approved Reseller that sells Group Company X products but not Group Company Y products may use Group Company X trademarks in connection with its sale of Group Company X products, but may not use Group Company Y trademarks) . 5 Weight - Doors General Information May, 2018

607 DOORS 707 EXTRAS 20 18 16 14 20 18 16 14 GA TYPE F F F F F F F F LBS SIZE Astragals Add 6 63 80 2468 64 81 97 118 Closer Reinforcement Add 6 70 89 2868 71 90 109 132 Rim Panic Reinforcement Add 6 78 98 3068 79 99 120 146 Vertical Rod Reinforcement Add 8 85 108 3468 86 109 132 160 Push/Pull Reinforcement Add 6 92 117 3868 93 118 143 175 Top Cap Steel Add 1 .5 99 126 4068 100 127 155 189 N or T Edge Weld Add 1 66 84 2470 67 85 102 123 74 94 2870 75 95 114 138 FV or FNV Deduct 2 81 103 3070 82 104 126 153 HG Deduct 12 89 113 3470 90 114 138 168 FG Deduct 24 96 123 3870 97 124 150 183 104 133 4070 105 134 162 198 Adds for factory glazing can be found on page 17 of General Information 93 118 3080 94 119 144 175 section 102 129 3480 103 130 157 192 109 140 3880 110 141 172 209 Weight based on average steel tolerances and and common sizes.Variations 119 151 4080 120 152 185 226 may occur up to 10%. ALL WEIGHTS ARE LISTED IN POUNDS

727DOORS 737 SPECIAL SIZE DOOR WEIGHTS 20 18 16 14 20 18 16 14 GA TYPE F F F F F F F F Can be determined by finding the weight per square foot of an existing 111 127 SIZE 145 266 weighted door (ex: 3070)and multiply that square foot weight by the number of 125 144 2868 164 187 square feet in the over size door. 139 160 3068 182 208 EXAMPLE: 154 177 3468 201 229 To calculate the weight of a 707S 16 gauge 4’6” x 10’ door, take a 168 193 3868 219 251 707S 3070 16 gauge door which is 21 square feet. Then divide the 21 182 210 4068 238 272 square feet into the weight of the door (126 lbs.) to determine the pounds 116 133 2470 153 174 per square feet. 131 151 2870 172 196 146 168 3070 191 218 126 ÷ 21 = 6 lbs./sq. ft. 161 185 3470 211 241 176 203 3870 230 263 Then calculate how many square feet in the over size door 4’6” x 10’ 191 220 4070 249 285 (4.5 x 10 = 45 sq.ft.), then multiply 45 sq. ft. by 6 pounds/sq. ft. 166 192 3080 219 250 to determine the approximate weight. 185 213 3480 240 275 204 234 3880 264 301 45 x 6 = 270 lbs. 222 256 4080 285 326 NOTE: When determining the weight of other door series and gauge, calculate from the appropriate table . For example: 747S 14 gauge 4’6” x 10’ door, take a 747S 3070 14 gauge door to find the lbs./sq. ft.

183 ÷ 21 = 8.71 lbs/sq. ft. 6 Weights - Doors General Information May, 2018

747 & 777DOORS 757 EXTRAS 20 18 16 14 20 18 16 14 GA TYPE F F F F F F F F LBS SIZE Astragals Add 6 99 115 136 2468 Closer Reinforcement Add 6 118 136 160 2868 160 Rim Panic Reinforcement Add 6 127 148 173 3068 173 Vertical Rod Reinforcement Add 8 146 169 197 3468 197 Push/Pull Reinforcement Add 6 155 180 212 3868 212 Top Cap Steel Add 1.5 174 201 235 4068 235 N or T Edge Weld Add 1 104 121 142 2470 142 124 143 167 2870 167 FV or FNV Deduct 2 133 155 182 3070 182 HG Deduct 12 153 177 207 3470 207 FG Deduct 24 163 189 222 3870 222 183 211 247 4070 247 Adds for factory glazing can be found on page 17 of General Information section. 152 177 208 3080 208 175 202 237 3480 237 Weight based on average steel tolerances and and common sizes.Variations 186 216 254 3880 254 may occur up to 10%. ALL WEIGHTS ARE LISTED IN POUNDS. 208 241 282 4080 282 847DOORS 857 20 18 16 14 20 18 16 14 GA TYPE F F F F F F F F SPECIAL SIZE DOOR WEIGHTS SIZE Can be determined by finding the weight per square foot of an existing 151 2468 196 weighted door (ex: 3070)and multiply that square foot weight by the 172 2868 223 number of square feet in the over size door. 194 3068 252 216 3468 280 237 3868 308 EXAMPLE: 258 4068 336 To calculate the weight of a 707S 16 gauge 4’6” x 10’ door, take a 159 2470 206 707S 3070 16 gauge door which is 21 square feet . Then divide the 21 181 2870 235 square feet into the weight of the door (126 lbs .) to determine the pounds 203 3070 264 per square feet . 226 3470 294 248 3870 323 126 ÷ 21 = 6 lbs ./sq . ft . 271 4070 352 232 3080 302 Then calculate how many square feet in the over size door 4’6” x 10’ 258 3480 336 (4 .5 x 10 = 45 sq .ft .), then multiply 45 sq . ft . by 6 pounds/sq . ft . 284 3880 370 to determine the approximate weight . 310 4080 403 45 x 6 = 270 lbs .

NOTE: When determining the weight of other door series and gauge, calculate from the appropriate table . For example: 747S 14 gauge 4’6” x 10’ door, take a 747S 3070 14 gauge door to find the lbs ./sq . ft .

183 ÷ 21 = 8 .71 lbs/sq . ft . 7 Weights - Factory Glazed Doors General Information May, 2018

Add per door for factory installed windows . Deduct for steel is already included in calculations.

All weights are in pounds (lbs).

KERALITE KERALITE .25” TEMPERED .25” FILMED WIRE .625” IGU 1” IGU FILMED 3/16" LAMINATED 5/16" FV 23 2 336 FV1 34 2 449 FNV 23 2 336 FNV1 67 4 7714 FNV2 89 6 10918 FNV3 9 10 7 11 11 21 FNV4 22 1 336 FNV5 23 2 337 FNV6 22 1 325 FNV7 44 3 549 FNV8 55 3 6611 FNV9 23 2 337 HG 8 20 4 13 11 30 FG 14 19 6 24 21 58 8 Weights -KD Frames General Information May, 2018

M PROFILE M 18 GAUGE 16 GAUGE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 SIZE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 33 36 39 45 51 55 3068 41 44 48 55 63 67 35 38 41 47 54 58 4068 43 47 51 58 66 71 41 45 48 55 62 66 6068 50 54 58 67 76 81 45 49 52 60 67 72 8068 54 59 64 73 82 88 34 38 41 47 53 57 3070 42 46 50 57 65 70 36 39 43 49 56 60 4070 44 48 52 60 68 73 42 46 49 57 64 68 6070 51 56 60 69 78 84 46 50 54 61 69 74 8070 56 60 65 75 85 91 39 42 46 52 59 64 3080 48 52 56 64 73 78 41 44 48 55 62 67 4080 50 54 58 67 76 82 48 52 56 63 71 76 6080 58 62 67 77 87 93 51 56 60 68 77 82 8080 62 67 72 83 93 100 46 50 54 62 70 75 30100 56 61 66 76 86 93 48 52 56 64 73 78 40100 58 63 69 79 90 96 55 59 64 73 82 88 60100 66 72 77 89 100 108 58 63 68 78 87 94 80100 70 76 83 95 107 115

M PROFILE M 14 GAUGE 12 GAUGE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 SIZE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 51 56 60 65 69 79 3068 68 75 81 94 106 114 54 59 63 68 73 83 4068 72 79 85 99 112 121 62 67 73 84 95 101 6068 82 90 97 112 127 136 67 73 79 91 103 111 8068 90 98 106 123 139 149 53 58 62 72 82 88 3070 71 78 84 97 110 119 55 61 66 76 86 92 4070 75 82 88 102 116 125 64 69 75 86 97 104 6070 85 93 100 116 131 141 69 75 81 94 106 114 8070 92 101 109 126 143 154 59 65 70 81 91 98 3080 80 87 94 109 123 133 62 68 73 84 96 103 4080 83 91 99 114 129 139 71 77 83 96 108 116 6080 95 103 111 128 145 156 77 83 90 103 117 125 8080 102 111 120 139 157 168 70 77 83 96 109 117 30100 95 103 115 130 147 158 73 80 86 100 113 122 40100 98 107 116 135 153 165 82 89 97 111 125 135 60100 110 119 129 149 169 181 88 95 103 119 134 144 80100 117 128 138 160 181 194

Curriseal Frame WM Add 2 pounds Flat Plate Closer Add 1 Pound Currisound Frame QM Add 2 pounds Reinforcement

NOTE: The weights shown may vary due to gauge tolerance . 9 Weights - KD Frames General Information May, 2018

C C-CM 18 GAUGEPROFILE 16 GAUGE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 SIZE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 36 39 42 48 53 57 3068 44 48 51 58 65 70 38 41 44 50 56 60 4068 46 50 54 61 69 73 44 48 51 58 64 69 6068 54 58 62 70 78 84 48 52 55 63 70 75 8068 58 63 67 76 85 91 38 41 43 49 55 59 3070 46 49 53 60 68 72 39 42 46 52 58 62 4070 48 52 56 63 71 76 46 49 53 59 66 71 6070 55 59 64 72 81 86 49 53 57 64 72 77 8070 60 64 69 78 88 94 42 46 51 55 62 66 3080 51 55 59 67 76 81 44 47 53 58 65 69 4080 53 58 62 71 78 84 51 55 61 66 74 79 6080 62 66 71 80 90 96 55 59 65 71 80 85 8080 66 71 76 87 97 103 50 53 57 65 73 78 30100 60 65 70 80 90 96 52 55 59 68 76 81 40100 62 68 73 83 93 100 58 63 67 76 85 91 60100 71 76 82 93 104 111 62 67 72 81 91 97 80100 75 81 87 99 111 118

C-CM PROFILE 14 GAUGE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 SIZE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 56 59 65 75 81 88 3068 59 63 69 79 86 93 4068 69 73 79 90 99 105 6068 74 79 86 98 108 115 8068 59 61 68 78 86 91 3070 61 65 71 81 91 96 4070 71 75 81 93 104 108 6070 76 81 89 100 113 118 8070 65 70 75 86 95 101 3080 68 74 79 90 100 106 4080 79 85 89 103 114 120 6080 84 91 96 110 123 130 8080 76 83 89 101 113 121 30100 79 86 93 105 118 126 40100 89 98 104 118 131 140 60100 94 104 111 125 140 150 80100

Curriseal Frame WM Add 2 pounds Flat Plate Closer Add 1 Pound Currisound Frame QMQCM Add 2 pounds Reinforcement

NOTE: The weights shown may vary due to gauge tolerance . 10 Weights - Frame Components General Information May, 2018

M PROFILE M 18 GAUGE 16 GAUGE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 SIZE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 STRIKE JAMBS 13 14 15 17 20 21 68 16 17 19 22 25 26 13 15 16 18 21 22 70 16 18 19 23 26 28 15 16 18 21 24 25 80 19 20 22 26 29 31 18 20 22 25 29 31 100 23 25 27 31 36 39 HINGE JAMBS

15 17 18 20 23 24 68 18 20 21 24 27 29 16 17 18 21 23 25 70 19 21 22 25 28 30 19 20 22 24 27 29 80 22 24 26 29 33 35 22 24 26 29 33 35 100 26 29 31 35 40 42

HEADS 6 7 7 8 9 10 30 7 8 9 10 10 11 7 8 9 10 12 13 40 9 10 11 13 15 16 11 12 13 15 18 18 60 14 15 16 19 22 23 14 16 17 20 22 24 80 18 20 22 25 28 31

M PROFILE M 14 GAUGE 12 GAUGE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 SIZE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 STRIKE JAMBS 20 22 23 27 31 33 68 27 29 32 37 42 45 21 23 25 29 32 35 70 28 31 33 39 44 48 23 26 28 32 37 40 80 32 35 38 44 50 54 29 32 34 40 45 49 100 39 43 47 54 62 67 HINGE JAMBS

22 24 26 30 34 36 68 29 32 35 40 45 48 23 25 27 31 35 38 70 31 33 36 41 47 50 27 29 32 36 41 43 80 36 39 42 48 54 58 33 35 38 43 49 53 100 43 47 51 58 66 71 HEADS

9 101113151630131415182022 12 13 15 17 19 21 40 17 18 20 23 26 28 18 19 21 25 28 30 60 24 27 29 34 38 41 23 26 28 32 37 39 80 32 35 38 44 50 54

Flat Plate Closer Reinforcement Add 1 pound NOTE: The weights shown may vary due to gauge tolerance. 11 Weights - Frame Components General Information May, 2018

C PROFILE C-CM 18 GAUGE 16 GAUGE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 SIZE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 STRIKE JAMBS 14 15 16 18 20 22 68 17 18 20 23 25 27 15 16 17 19 22 23 70 18 19 21 24 27 29 16 18 20 22 25 26 80 20 22 24 27 30 32 21 22 23 27 30 32 100 25 27 29 33 37 40 HINGE JAMBS 16 17 18 19 24 25 68 20 21 23 26 28 30 17 19 20 22 25 26 70 21 22 24 27 30 31 20 22 24 26 28 30 80 24 26 27 31 34 36 24 25 27 31 34 36 100 28 31 33 37 41 44 HEADS 6789101130 8 8 9 111213 8 9 10 11 13 13 40 10 11 12 14 16 17 12 13 14 16 18 20 60 15 16 17 20 23 24 15 17 18 21 24 26 80 19 21 23 26 30 32

C-CM PROFILE 14 GAUGE 16 GAUGE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 SIZE 4-3/4 5-3/4 6-3/4 8-3/4 10-3/4 12-3/4 STRIKE JAMBS 21 23 25 29 31 34 68 23 24 26 30 34 36 70 25 28 30 34 38 40 80 31 34 36 41 46 50 100 HINGE JAMBS 25 26 29 33 35 38 68 26 28 30 34 38 39 70 30 33 34 39 43 45 80 35 39 41 46 51 55 100 HEADS 10 10 11 14 15 16 30 13 14 15 18 20 21 40 19 20 21 25 29 30 60 24 26 29 33 38 40 80

Flat Plate Closer Reinforcement Add 1 pound NOTE: The weights shown may vary due to gauge tolerance . 12 Weights -CCW 10'6" Length, 16 and 14 Gauge General Information May, 2018

JAMB DEPTH 4-3/4" 5-3/4" 6-3/4" 8-3/4" 10-3/4" 12-3/4" GAUGE 16 14 16 14 16 14 16 14 16 14 16 14 CCW NUMBERS 21 22 28 25 30 27 34 32 39 36 44 39 48 23 32 39 34 42 36 44 40 50 44 56 47 59 115 38 47 40 50 43 53 48 60 53 67 57 71 117 45 56 48 60 51 64 57 73 64 80 68 85 40 20 25 22 28 25 30 29 37 34 42 36 45 20 24 30 26 34 30 37 35 44 40 50 43 54 26 23 28 25 32 27 35 33 40 37 45 40 49 24, 25, 39 26 32 28 35 30 37 35 43 40 48 42 51 62, 63, 119, 120 27 33 29 35 32 38 36 44 41 49 43 53 16 42 53 46 58 50 63 60 75 68 85 72 91 17 50 63 56 69 60 75 68 85 77 97 82 102 18 60 76 67 83 72 89 82 102 92 116 98 122 50 71 88 78 97 84 104 96 119 107 135 115 143 41 42 53 47 59 51 64 60 75 68 86 74 91 42, 43, 44 45 56 49 61 54 67 63 78 71 88 76 95 81, 82, 133, 134 46 57 50 62 55 68 64 79 72 89 77 96 45, 46, 47 45 56 49 61 54 67 63 78 71 88 76 95 83, 84, 135, 136 46 57 50 62 55 68 64 79 72 89 77 96 85 43 54 47 59 51 64 60 75 69 86 74 91 86, 87, 88 48 59 53 64 57 69 66 81 75 91 79 97 89, 90, 137, 138 50 61 55 66 59 71 68 83 77 93 81 99 19 11 13 13 16 15 19 19 24 23 29 26 33 27 9.5 13 13 15 15 18 19 23 23 28 26 33 22 13 15 15 18 17 21 21 26 25 32 28 35 29 15 19 17 21 19 24 23 29 28 35 30 38 91 14 18 16 20 18 23 23 28 27 34 29 38 92 16 20 18 23 21 25 25 32 29 37 33 40 28 36 44 40 50 44 56 54 66 62 78 67 83 139 43 54 47 58 51 62 61 71 69 80 75 85 140 50 64 55 68 59 72 68 82 77 90 82 96 55 48 60 53 65 57 70 65 82 75 92 79 99 48, 49 NA NA NA NA NA NA NA NA NA NA NA NA 51, 52 55 68 64 80 72 90 90 112 107 134 117 146 53, 54 57 71 66 82 75 93 92 116 109 138 119 149

12 Gauge Add 40% to 14 Gauge Weight NOTE: The weights shown may vary due to gauge tolerannce 13 "Swift Pac" Doors and Frames General Information May, 2018 "Swift Pac" DOORS AND FRAMES

JAMB/HEAD OFFERING Jamb Depths: 5-3/4” DESCRIPTION: Profile: M Series CURRIES’ “Swift-Pac” Door and Unit Quantities: 52 jambs per unit Frame Program offers the most 52 or 26 heads per unit popular sizes and face steel gauges Jamb Depths: 5-5/8” required in today’s construction Profile: C Series market nationwide. Unit Quantities: 52 jambs per unit “Swift-Pac” Doors and Frames 52 or 26 heads per unit include an additional 5% net Jamb Depths: 5-7/8” savings to you. Profile: C Series Unit Quantities: 52 jambs per unit DOORS: 52 or 26 heads per unit Palletized units are packaged with 15 identical products. Units cannot NOTE: Palletizing unit quantities is critical for maximum be broken apart for mixed gauge, size, hand, etc. These products can efficiencies in storage and shipping these unit packages. be ordered as a Service Center item or from the personalized preprinted stock order form two week manufacturing program.

607S AND 707S SERIES OFFERING • 20 gauge non handed with and without closer reinforcements, 3068 and 3070 * • 18 gauge non handed with and without closer reinforcements, 3068 and 3070 *

707S SERIES OFFERING • 20 gauge handed without closer reinforcements, 3068 and 3070 * • 18 gauge handed with and without closer reinforcements, 3068 and 3070 * *Standard Hinge Preparations • 18 gauge non-handed with closer reinforcements, 3068 & 3070 *

LOCK OPTIONS: Cylindrical Lock (G2), Lever (G2B) Mortise Lock Edge only (G3AEO) Mortise Lock Reinforce only (G3ARO) (See the last page of the “Door” section in this Price Manual)

FRAMES: Palletized units are packaged with identical products per unit. Identified Swift-Pac items are shown on the last page of the “Frame” section in this Price Manual. Units cannot be broken apart for mixed hand, size, quantity, etc .These products can be ordered as a Service Center item or from the personalized preprinted stock order form two week manufacturing program. “SWIFT - PAC” frames are available in Masonry “M” and Drywall ”C” profile frames in 16 gauge and in the following shipping unit quantities: 14 Notes General Information May, 2018 i Index Flush Door Prices May, 2018

DESCRIPTION GAUGE PAGE(S)

607S Series — Commercial Grade 1 3/4” 20,18 Standard Description 2 Extras 3

707S Series — Commercial Grade 1 3/8” and 1 3/4” 20, 18, 16, 14 Standard Description 4 Extras 5

707S Series — Embossed Panel 1 3/4” 18 Standard Description 6 Extras 7

707S 1 and 2-Panel Embossed High Definition Embossed Panel 18 8

CURRIStain 707 6 Panel 9 707 Polystyrene Core 10-11 727 Temperature Rise 12-13

727S Series — Temperature Rise Doors 1 3/4” 18,16 Standard Description 14 Extras 15

747S Series — Steel Stiffened Doors 1 3/4” 18,16,14 Standard Description 16 Extras 17

747S-TR Series — Steel Stiffened Temperature Rise Doors Standard Description 18, 16 18 Extras 19

767S Series — Stile and Rail Door 20

777S Trio Series — Steel Stiffened —Fiberglass Filled 18, 16, 14 Standard Description 22 Extras 23

777SE Trio-E Series — Steel Stiffened —Polyurethane Filled 18, 16 Standard Description 24 Extras 25

847S Series — Security 1 3/4” thick doors 14 Standard Description 26 Extras 27

857S Series — Security 2” thick doors 14 Standard Description 28 Extras 29

797S Series — Mercury Doors - Polyurethane Filled 18 Standard Description 30 Extras 31

797S Series — Mercury Doors - Embossed Panel 18 Standard Description 32 Extras 33

797S Series — Mercury Doors - 1 or 2 Panel High Definition Embossed 18 Standard Description 34 2 607S Series Doors - Polystyrene Core Flush Door Prices May, 2018

WIDTH HEIGHT 20 GA 18 ga STANDARD DESCRIPTION Cold rolled steel 20 or 18 gauge Polystyrene core, exposed seam “S” edge 20, 24, 26, 68 409 480 only . 1 3/4" thick doors. Limited hardware preparations 28 .210, 30 34, 36 68 553 614 EDGE BEVELS AVAILABLE “B” square both edges/non handed — No 38, 310, Charge 68 621 664 40 20, 24, 26, 70 425 511 28 .210, 30 34, 36 70 564 629 38, 310, 70 618 680 40 20, 24, 26, 72 477 563 28 .210, 30 OPTIONS 34, 36 72 592 654 Galvanneal steel (A60) – Not available 38, 310, Visual ID tag Add 4 72 627 686 40 30 80 560 626 LISTED FIRE LABEL DOORS 34, 36 80 695 770 Label door restrictions per gauge and size can be determined 38, 310, in the current CURRIES product brochure . Prices are without closer (CL). 80 778 841 40 LESS OVERSIZED DOOR OPTIONS – Not Available CL Underwriters Laboratories ABCG Add 47 Warnock Hersey ABCG Add 10 20 minute U .L . or W .H .I . Add 10 Label construction Add 15

NON STANDARD SIZE DOORS – Not available

(Standard sizes are published on this page) 3 607 Series Doors Flush Door Prices May, 2018

EXTRAS EXTRAS

ASTRAGALS LOCK PREPARATIONS CONTINUED Astragals must be ordered separately, loose from parts section Mortise lock 1 3/4” door escutcheon trim G3 Standard Mortise lock edge only preparation G3AE Standard CAPS — top or bottom Mortise lock reinforce only G3AR Standard Steel installed flush (with screws per cap) Add 19 Rim panic reinforce only G11 Add 31 Rim vertical rod reinforce only G11A Add 63 CLOSER Push Pull G18 Add 28 Surface mounted, reinforcement only Add 26 LOUVERS FLUSH BOLTS OR SURFACE BOLTS Preparation or installation is not available in the 607 series from the factory . Top and bottom flush bolt ANSI A115 .4 H1 Add 61 Edge prep . – hole only for use with STRIKES Z astragal with H1 prep . H1 HO Standard 4 7/8” ANSI strike 1 3/4” door E1 NL Add 43 Top and bottom surface bolt SB Add 41 Strike preps in non handed doors must have lip cut into door edge by others . reinforcement only 4 7/8” strike hole only for use with Z astragal E1HO HINGE PREPARATIONS Standard with E1 prep 4 1/2” (non handed) Standard UNDERCUTS LOCK PREPARATIONS 1 3/4" doors - 5/8" standard, 3/8" and 3/4" available Cylindrical lock 1 3/4” door 161 G2 Standard Cylindrical lock 1 3/4” door lever trim G2B Standard VISION KITS (Universal lever trim prep .) Preparation or installation is not available in the 607 series from the factory . Deadlock 1 3/4” door tubular 181 G16 Standard SWIFT PAC Preparations for 607 series doors are limited Quantity door pricing is available from the Service Centers . to the published preparations on pages 2 and 3 . Preprinted manufactured order forms are available in the CURRIES Partner Area of the website . 4 707 Series Doors - Polystyrene Core Flush Door Prices May, 2018

WIDTH HEIGHT 20 GA 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Polystyrene core with an "A" edge bevel and exposed seam "S" edge are standard 68 489 543 645 800 28 .210, 30 34, 36 68 619 680 768 915 1 3/8" and 1 3/4" thick doors 38, 310, 1 3/8" doors are availble in 18 or 20 gauge only up to 3676 maximum. 3 68 719 764 862 1007 40 1/2" hinge preparation standard 20, 24, 26, "A" bevel only on 1 3/8" doors 70 504 574 679 842 28 .210, 30 34, 36 70 643 706 783 954 EDGE BEVELS AVAILABLE 38, 310, "A" standard (1/8" in 2" lock edge-square hinge edge No Charge 70 729 793 879 1046 40 20, 24, 26, "B" specify (square both edges) No Charge 72 524 610 722 873 28 .210, 30 34, 36 72 648 723 790 982 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, NOTE: For other edge bevels refer to Engineered Door Section 72 739 810 890 1074 40 30 80 688 774 889 1110 OPTIONS 34, 36 80 847 890 957 1201 Galvanneal steel (A60) 38, 310, 20, 18, 16, and 14 gauge door Add 75 80 886 972 1034 1271 40 30 90 N/A 1127 1243 1468 Note: 20 gauge galvanneal over 30 wide - not available 34, 36 90 N/A 1227 1293 1535 38, 310, Galvanized (G90) includes epoxy primer Add 264 90 N/A 1307 1370 1602 40 30 100 N/A 1243 1361 1584 Honeycomb core construction (1 3/4" only) Add 31 34, 36 100 N/A 1345 1409 1652 Polyurethane slab core (UL label only) Add 99 38, 310, "N" seamless edge filled Add 68 100 N/A 1424 1486 1720 40 "T" Continuous wire welded Add 108 OVERSIZED DOOR OPTIONS 12 Gauge Hinge Rail No Charge Doors over 4' wide and 8' high are factory crated for protection in transit Visual ID tag Add 4

20 gauge and 1 3/8" oversized doors are not available Doors over 4' wide may be priced as follows: LISTED FIRE LABEL DOORS 16 gauge CR Steel max size 5'x10' add to next largest size $466 Label door restrictions per gauge and size can be determined 16 gauge RK Steel max size 4' 10"x10' add to next largest size $466 in the current CURRIES product brochure . Prices are without closer (CL). 14 gauge CR Steel max size 5'x10' add to next largest size $466 14 gauge RK Steel max size 4'10"'x10' add to next largest size $466 LESS Larger door sizes are available 747 series only. CL Contact Factory for quote Underwriters Laboratories ABCDE Add 47 Warnock Hersey ABCDE Add 10 20 minute U .L . or W .H .I . Add 10 Label construction Add 15

NON STANDARD SIZE DOORS Price as the next largest standard size door 5 707S Series Doors Flush Door Prices May, 2018

EXTRAS EXTRAS

ASTRAGALS LOCK PREPARATIONS CONTINUED Z type blank screw applied Z1 Add 67 Mortise lock 1 3/8" door G3A* Add 33 Z type with strike E1 screw applied Z1/E1 Add 110 Mortise lock 1 3/4" door G3 Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Mortise lock 1 3/4" door sectional G3A* Standard Flat astragal screw applied Add 65 Hotel and master ring cylinder Standard Mortise lock edge only preparation G3AEO Standard CAPS — top or bottom Mortise lock reinforce only G3ARO Standard Steel installed flush (with screws per cap) Add 19 Mortise panic exit G12* Add 56 Rim panic reinforce only G11 Add 31 CLOSER Rim panic reinforce with function holes G11* Add 31 Surface mounted, reinforcement only Add 26 Rim vertical rod reinforce only G11A Add 63 Concealed or semi-concealed Add 237 Rim vertical rod with function holes G11A* Add 63 DUTCH DOOR (SHELF EXTRA) Add 265 Concealed vertical rods G12A* Add 423 FLUSH BOLTS OR SURFACE BOLTS Low profile vertical rod G12B Add 353 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Recessed vertical rod G13C Add 387 (when used without astragal or with flat bar astragal) Mortise panic ctr & bottom latch G14C Add 89 Top and bottom surface bolt reinforced only SB Add 41 Label Fire Pin (if required) Add 14 HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard LOUVERS 5" Hinge standard or heavyweightAdd Each 4 Louver cutout only Add 59 1 1/2 pair up to and including 7'6" Standard Louver cutout surround with channel Add 100 2 pair over 7'6" to 10'0" Standard (label louver requirement) Anchor hinge set Replacement Door (e.g. McKinney TA792) No drill, no tap Add 142 3 Hinge preps Add 22 (e.g. McKinney TA793) No Add 4 Hinge preps Add 30 Continuous hinge preparation(mounting holes field drilled) STRIKES Concealed mounting No Add 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 (e.g. McKinney 11, 24) 2 3/4” ANSI lipped strike 1 3/4” or 1 3/8" door E2 Add 43 12 gauge hinge rail available (Specify) No Add 3 1/2” ANSI deadlock strike E2 Add 43 Surface mounting 2 3/4” ANSI deadlock strike E4 Add 43 (e.g. McKinney 21, 53) Add 74 Electric Strike E9* Add 80 Electric raceway Add 118 LOCK PREPARATIONS Open back strike * Add 89 Cylindrical lock 1 3/8” door 160 G1 Standard *Advise of manufacturer and function of hardware Cylindrical lock 1 3/8” door 161 1 1/8" latch G2* Add 94 Hardware function holes do not include trim mounting holes Cylindrical lock 1 3/4” door 161 G2 Standard UNDERCUTS Cylindrical lock 1 3/4” door lever trim G2B* Standard 1 3/8” doors - 3/4" standard, 3/8" available No Add (Universal lever trim prep .) 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Deadlock 1 3/8” door tubular 181 1" latchbolt G16 Standard All other undercuts per door Add 19 Deadlock 1 3/4” door tubular 181 G16 Standard VISION KITS-Type 9 Standard or Optional Type 1 Deadlock 1 3/8” door tubular 181 Vision kits installed (3/8" pocket) standard rim type kit 1 1/8" latchbolt (e.g. Sargent 480, 460) G16* Add 94 FV Add 133 For 1 3/8" doors FNV Add 159 Deadlock 1 3/4" door mortise 190 G17 Add 66 HG Add 170 Interconnected lock G25 Add 43 FG Add 241 FL cutout only Add 59 NOTE: For additional window options refer to the Engineered Door Section SWIFT PAC Quantity door pricing is available from the Service Centers . Preprinted manufactured order forms are available in the CURRIES Partner Area of the website . 6 707S Embossed Panel 18-16 Flush Door Prices May, 2018

STANDARD DESCRIPTION Cold rolled Steel (CRS) 18 gauge steel Galvanneal steel 18 or 16 gauge steel. Polystyrene core with a "B" edge bevel "S" exposed edge seam. 1 3/4" thick doors only E6 E62FNVS E6HGS Type 9 kit included on doors with lites W H 18 CRS 18 CRS 18 CRS See Engineered Door Section for other options 28, 210, 68 711 1290 1058 30 EDGE BEVELS AVAILABLE 28, 210, 70 742 1321 1089 30 "A" Standard 1/8" in 2" lock edge-square hinge edge No charge "B" (square both edges) No charge EDGE OPTIONS "N" Seamless edge filled Add 68 "T" not available

E6 E6 E62TL E62FNVS E6HGS E8 W H 18 GALV 16 GALV18 GALV 18 GALV 18 GALV 18 GALV *28, 210, 30 68 786 888 1288 1365 1133 786 34, 3668 923 NA NA 1502 1270 NA *28, 210, 3070 817 922 1319 1396 1164 817 34, 3670 1015 NA NA 1528 1296 NA

* NOT AVAILABLE ADA COMPLIANT ADA = Americans with Disabilities Act ` HALF GLASS 9 LITE CONVERSION KITS 3068 ADA Compliant door ADA Add 25 Type 9 Standard ADA compliant E8 Door provided with Polyurethane core . Cellular PVC 9 Lite kit-20-1/2xw x 34-7/16 MS102566 563 Aluminum 9 Lite – 20-1/2w x 34-7/16h MS102483 750 NOTE: 3068 ADA compliant doors manufactured offsite and Type 1 Optional separately. Call to verify lead-times, freight cost, and ship schedule Cellular PVC 9 Lite kit-20-1/2xw x 34-7/16h MS007039 563 Aluminum 9 Lite – 20-1/2w x 34-7/16h MS007013 750 LISTED FIRE LABEL DOORS (Order separately; dd to HG type door, surface mount Label door restrictions per gauge and size can be determined in the PVC is a non-fire listed product, aluminum is a fire listed product) General information Section. Prices are without closer (CL). Type 2 kit, maximum 7/8" pocket. LESS Interviewer (E6FP 1/2, E6FP 9/16) Add 19 CL Mail slot (E6MS) cutout only (std) Add 30 Underwriters Laboratories ABCDE Add 47 Vision Kits installed (3/8" pocket) Standard rim type kit Warnock Hersey ABCDE Add 10 Steel Muntin E6HG9 (add to E6HGS) Add 767 20 minute U .L . or W .H .I . Add 10 Label Construction Add 15 Verify label door limitations

NON STANDARD SIZE DOORS- contact factory OVERSIZED DOOR OPTIONS-not available 7 707S Series Doors-Embossed Panel Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS-Not available "B" Bevel LOCK PREPARATIONS CONTINUED Specify "A" bevel, you must "hand" doors Mortise lock 1 3/4" door escutcheon trim G3 Standard Z type blank screw applied Z1 Add 67 Mortise lock 1 3/4" door sectional trim G3A* Standard Z type with strike E1 screw applied Z1/E1 Add 110 Hotel and master ring cylinder functions Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Mortise lock edge only preparation G3AEO Standard Flat astragal screw applied Add 65 Mortise lock reinforce only G3ARO Standard

CAPS — top or bottom Mortise panic exit G12* Add 56 Steel installed flush (with screws per cap) Add 19 Rim panic reinforce only G11 Add 31 Rim panic reinforce with function holes G11* Add 31 CLOSER Rim vertical rod reinforce only G11A Add 63 Surface mounted, reinforcement only Add 26 Rim vertical rod with function holes G11A* Add 63 Concealed or semi-concealed Add 237 Label Fire Pin (if required) Add 14

FLUSH BOLTS LOUVERS -Preparation or installation is not available from the factory . Top and bottom flush bolt ANSI A115.4 H1 Add 61 (when used without astragal or with flat bar astragal) STRIKES Top and bottom surface bolt reinforced only SB Add 41 4 7/8” ANSI lipped strike ( A bevel) E1 Add 43 2 3/4” ANSI lipped strike (A bevel) E2 Add 43 HINGE PREPARATIONS 3 1/2” ANSI deadlock strike E3 Add 43 4 1/2" standard or heavyweight Standard 2 3/4” ANSI deadlock strike E4 Add 43 5" Hinge standard or heavyweightAdd Each 4 Electric Strike (A bevel) E9* Add 80 Electric raceway Add 118 LOCK PREPARATIONS Open back strike (A bevel) * Add 89 Cylindrical - 161 G2 Standard Cylindrical lock - lever trim holes G2B Standard *Advise of manufacturer and function of hardware (Universal lever trim prep .) Deadlock - tubular 181 G16 Standard UNDERCUTS Deadlock - mortise 190 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add (e.g. Sargent 4870) G17 Add 66 All other undercuts per door Add 19 Interconnected lock G25 Add 43 8 707S 1, 2, and 3-Panel Embossed 18 ga High Definition Embossed Panel Flush Door Prices June, 2019

FLUSH BOLTS OR SURFACE BOLTS Top and bottom flush bolt ANSI A115.4 H1 Add 61 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 ADA Compliant 1 or 2 panel - 6'8" only Add 25 HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard 3P* LOCK PREPARATIONS POLYSTYRENE CORE - STANDARD Cylindrical 161 G2 Standard 3068 786 786 786 786 Cylindrical locklever trim holes G2B Standard 3070 817 817 817 817 (Universal lever trim prep.) 3080 1017 1017 1017 1017 Deadlock tubular 181 G16 Standard Deadlock mortise 190 (e.g. Sargent 4870) G17 Add 66 POLYURETHANE CORE - OPTIONAL Interconnected lock G25 Add 43 3068 885 885 885 885 Mortise lock 1 3/4" door escutcheon trim G3 Standard 3070 916 916 916 916 Mortise lock 1 3/4" door sectional trim G3A* Standard 3080 1116 1116 1116 1116 Hotel and master ring cylinder functions Standard Mortise lock edge only preparation G3AEO Standard * Polyurethane core only Note: Mortise lock preps 30 wide door only Rim panic reinforce only G11 Add 31 STANDARD DESCRIPTION Rim panic reinforce with function holes G11* Add 31 Galvanneal (A40) steel 18 ga. Rim vertical rod reinforce only G11A Add 63 Polysyrene Core Standard Rim vertical rod with function holes G11A* Add 63 Polyurethane Core Optional Edge bevel available LOUVERS: -preparation or installation is not available from the factory "A" 1/8" in 2" lock edge - squre hinge edge "B" Square both edges STRIKES EDGE OPTIONS 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 "S" Exposed edge seam N/C 2 3/4” ANSI lipped strike 1 3/4” or 1 3/8" door E2 Add 43 Listed Fire Label Doors 3 1/2” ANSI deadlock strike E2 Add 43 Label door restrictions per gauge and size can be determined 2 3/4” ANSI deadlock strike E4 Add 43 in the current CURRIES product brochure. Prices are without closer (CL). Electric Strike (A bevel) E9* Add 80 LESS Electric raceway Add 118 CL *Advise of manufacturer and function of hardware Underwriters Laboratories ABCDE Add 47 Warnock Hersey ABCDE Add 10 UNDERCUTS 20 minute U.L. or W.H.I. Add 10 1 3/4” doors - minimum 3/4" No Add Label Construction Add 15 All other undercuts per door Add 19 Verify label door limitations ASTRAGALS - Not available "B" Bevel Specify "A" Bevel you must "hand" doors NOTE: Charges waived when quantities exceed 24 doors with any Z type blank screw applied Z1 Add 67 combination of non standard undercut. Z type with strike E1 screw applied Z1/E1 Add 110 VISION KITS-Type 9 or 10 (only available on 2 panel design Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 3/8" Pocket HG (2PHG) Add 281 Flat astragal screw applied Add 65 1/2" to 1-1/8" Pocket HG (2PHG) Add 375

CAPS — top or bottom NOTE: This product is manufactured offsite and ship separately. Steel installed flush (with screws per cap) Add 19 Call to verify lead times, freight cost, and ship schedule

CLOSER Surface mounted, reinforcement only Add 26 9 707S CURRIStain (A1) Six Panel Door 18 Ga. Flush Door Prices November, 2018

STANDARD DESCRIPTION Steel code - A1 Galvanneal (A40) steel 18 gauge steel. Polystyrene core “S” exposed edge seam 1-3/4” thick doors only E6 18 E6HGS* W H GALV. 18 GALV. EDGE BEVELS AVAILABLE 28, 210, 30 68 2088 2473 “A” Standard 28, 210, 30 70 2166 2551 1/8” in 2” lock edge-square hinge edge No charge “B” standard (square both edges/non handed) No charge

LISTED FIRE LABEL DOORS LOCK PREPARATIONS Label door restrictions per gauge and size can be determined Cylindrical - 161 G2 Standard in the current CURRIES product brochure. Prices are without closer (CL), Cylindrical lock - Lever trim holes G2B Standard (Universal lever trim prep) LESS CL Deadlock - Tubular 181 G16 Standard Underwriters Laboratories ABCG Add 47 Deadlock - Mortise 190 Warnock Hersey ABCG Add 10 (e.g. Sargent 4870) G17 Add 66 20 minute U.L. or W.H.I. Add 10 Interconnected lock G25 Add 43 Label construction Add 15 Mortise lock 1-3/4" door escutcheon trim G3 Standard Verify label door limitations Mortise lock 1-3/4" door sectional trim G2A* Standard Hotel and master ring cylinder functions Standard NON STANDARD SIZE DOORS - contact factory Mortise lock edge only preparation G3AEO Standard OVERSIZED DOOR OPTIONS - not available Mortise lock reinforce only G3ARO Standard Mortise panic exit G12* Add 56 ASTRAGALS - Not available “B” bevel Rim panic reinforce only G11 Add 31 Specify “A” bevel, you must “hand” doors Rim panic reinforce with function holes G11 Add 31 h type blank screw applied K Add 295 Rim vertical rod reinforce only G11 Add 63 h type with strike E1 screw applied K/E1 Add 336 Rim vertical Rod with function holes G11A* Add 63 h type with flush bolt screw applied K/H1 Add 354 h type with strike and flush bolt K/E1/H1 Add 397 Louvers - preparation or installation is not available from the factory screw applied CAPS - top or bottom STRIKES Steel installed flush (with screws per cap) Add 19 4-7/8” ANSI lipped strike (A bevel) E1 Add 43 CLOSER 2-3/4” ANSI lipped strike (A bevel) E2 Add 43 Surface mounted reinforcement only Add 26 3-1/2” ANSI deadlock strike E3 Add 43 Concealed or semi-concealed Add 237 2-3/4” ANSI deadlock strike E4 Add 43 Electric strike (A bevel) E9 Add 80 FLUSH BOLTS Electric raceway Add 118 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Open back strike (A bevel) * Add 89 (When used without astragal) * Advise of manufacturer and function of hardware Top and bottom surface bolt reinforce only SB Add 41 HINGE PREPARATIONS UNDERCUTS 4-1/2” standard or heavyweight Standard 1-3/4” doors - 3/4” min. standard No Add 5” Hinge standard or heavyweight Add Ea 4 All other undercuts per door Add 19 CURRIStain COLOR OPTIONS Wheat, Natural, Cashew, Cocoa, Cabernet, Java CUSTOM COLOR MATCH Custom stain color match - inhouse factory formulation Add 75 Send physical sample to be matched to your Customer Service Professional. *If we are unable to match your finish using our pre-formulated materials, additional formulation is available with extended lead time and a set up fee. 10 707S Series Doors - CURRIStain (A1) Polystyrene Core Flush Door Prices November, 2018

WIDTH HEIGHT 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Steel code - A1 68 1363 1619 28.210, 30 Polystyrene core with an "A" edge bevel and exposed 34, 36 68 1707 1928 seam "S" edge 38, 310, 1 3/8" and 1 3/4" thick doors 68 1918 2164 40 Galvanneal (A40) included in price 20, 24, 26, 70 1441 1704 28.210, 30 34, 36 70 1772 1965 EDGE BEVELS AVAILABLE 38, 310, "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge 70 1990 2206 40 20, 24, 26, "B" specify (square both edges) No Charge 72 1531 1812 28.210, 30 34, 36 72 1815 1983 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, 72 2033 2234 40 30 80 1943 2231 OPTIONS 34, 36 80 2234 2402 Polyurethane slab core (UL label only) Add 99 38, 310, Visual ID tag Add 4 80 2440 2595 40 30 90 2829 3120 Honeycomb core Add 31 34, 36 90 3080 3245 38, 310, 90 3281 3439 40 LISTED FIRE LABEL DOORS Label door restrictions per gauge and size can be determined in the current CURRIES product brochure. Prices are without closer (CL). "TOUCH UP" STAIN MARKING PENS LESS Natural MS007104 56 Ea CL Cashew MS007112 56 Ea Underwriters Laboratories ABCDE Add 47 Wheat MS007120 56 Ea Warnock Hersey ABCDE Add 10 Cocoa MS007138 56 Ea 20 minute U.L. or W.H.I. Add 10 Cabernet MS007146 56 Ea Label construction Add 15 Java MS007153 56 Ea NON STANDARD SIZE DOORS Specify stain color when ordering Price as the next largest standard size door Natural, Cashew, Wheat, Cocoa, Cabernet, Java

CUSTOM COLOR MATCH Custom stain color match - inhouse factory formulation Add 75 Send physical sample to be matched to your Customer Service Professional. *If we are unable to match your finish using our pre-formulated materials, additional formulation is available with extended lead time and a set up fee. 11 707S Series Doors - CURRIEStain (A1) Polystyrene Core Flush Door Prices May, 2018

EXTRAS EXTRAS

ASTRAGALS LOCK PREPARATIONS CONTINUED "h" Astragal installed on inactive leaf-Code K on order form Mortise lock 1 3/8" door G3A* Add 33 h blank K/1 295 Mortise lock 1 3/4" door escutcheon trim G3 Standard h w/E1 strike prep K/E1 336 Mortise lock 1 3/4" door sectional trim G3A* Standard h w/H1 F. Bolt prep K/H1 354 Hotel and master ring cylinder functions Standard h w/E1 H1 prep K/E1/H1 397 Mortise lock edge only preparation G3AEO Standard CAPS — top or bottom Mortise lock reinforce only G3ARO Standard Steel installed flush (with screws per cap) Add 19 Mortise panic exit G12* Add 56 Rim panic reinforce only G11 Add 31 CLOSER Rim panic reinforce with function holes G11* Add 31 Surface mounted, reinforcement only Add 26 Rim vertical rod reinforce only G11A Add 63 Concealed or semi-concealed Add 237 Rim vertical rod with function holes G11A* Add 63 DUTCH DOOR (SHELF EXTRA) Add 265 Concealed vertical rods G12A* Add 423 Shelf is not wood grain Low profile vertical rod G12B Add 353 FLUSH BOLTS OR SURFACE BOLTS Recessed vertical rod G13C Add 387 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Mortise panic ctr & bottom latch G14C Add 89 (when used without astragal or with flat bar astragal) Label Fire Pin (if required) Add 14 Top and bottom surface bolt reinforced only SB Add 41 HINGE PREPARATIONS LOUVERS 4 1/2" standard or heavyweightStandard Louver cutout only Add 59 5" Hinge standard or heavyweightAdd Each 4 Louver cutout surround with channel Add 100 1 1/2 pair up to and including 7'6"Standard (label louver requirement) 2 pair over 7'6" to 10'0" Standard Anchor hinge set (e.g. McKinney TA792) No drill, no tap Add 142 (e.g. McKinney TA793) No Add STRIKES Continuous hinge preparation(mounting holes field drilled) 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 Concealed mounting No Add 2 3/4” ANSI lipped strike 1 3/4” or 1 3/8" door E2 Add 43 (e.g. McKinney 11, 24) 3 1/2” ANSI deadlock strike E3 Add 43 12 gauge hinge rail available (Specify) No Add 2 3/4” ANSI deadlock strike E4 Add 43 Surface mounting Electric Strike E9* Add 80 (e.g. McKinney 21, 53) Add 74 Electric raceway Add 118 LOCK PREPARATIONS Open back strike * Add 89 Cylindrical lock 1 3/8” door 160 G1 Standard *Advise of manufacturer and function of hardware Cylindrical lock 1 3/8” door 161 1 1/8" latch G2* Add 94 Hardware function holes do not include trim mounting holes Cylindrical lock 1 3/4” door 161 G2 Standard UNDERCUTS Cylindrical lock 1 3/4” door lever trim G2B Standard 1 3/8” doors - 3/4" standard, 3/8" available No Add (Universal lever trim prep .) 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Deadlock 1 3/8” door tubular 181 1" latchbolt G16Standard All other undercuts per door Add 19 Deadlock 1 3/4” door tubular 181 G16 Standard VISION KITS-Type 1 Standard Deadlock 1 3/8” door tubular 181 Vision kits installed (3/8" pocket) standard rim type kit 1 1/8" latchbolt (e.g. Sargent 480, 460) G16* Add 94 FV Add 298 For 1 3/8" doors FNV Add 361 Deadlock 1 3/4" door mortise 190 G17 Add 66 HG Add 385 Interconnected lock G25 Add 43 FG Add 543

NOTE: For additional window options refer to the Engineered Door Section 12 727S Series Doors - CURRIStain (A1) Temp. Rise 250° & 450° Flush Door Prices November, 2018

WIDTH HEIGHT 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Steel code - A1 68 2387 2771 28.210, 30 Composite core with an "A" edge bevel and exposed 34, 36 68 2758 3198 seam "S" edge are standard 38, 310, 1 3/4" thick doors 68 2902 3363 40 250° or 450° rating available. Price is the same, specify rating when ordering 20, 24, 26, Galvanneal (A40) included in price 70 2422 2816 28.210, 30 34, 36 70 2796 3243 EDGE BEVELS AVAILABLE 38, 310, "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge 70 2944 3416 40 20, 24, 26, "B" specify (square both edges) No Charge 72 2492 2899 28.210, 30 34, 36 72 2831 3288 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, 72 2969 3446 40 30 80 3268 3815 34, 36 80 3506 4119 LISTED FIRE LABEL DOORS 38, 310, 80 3687 4285 40 Label door restrictions per gauge and size can be determined in the current CURRIES product brochure. Prices are without closer (CL). LESS CL Underwriters Laboratories ABCDE Add 47 Warnock Hersey ABCDE Add 10 "TOUCH UP" STAIN MARKING PENS Label construction Add 15 NaturalMS007104 56 Ea CashewMS007112 56 Ea NON STANDARD SIZE DOORS Wheat MS007120 56 Ea Price as the next largest standard size door Cocoa MS007138 56 Ea Cabernet MS007146 56 Ea 4080 maximum single door Java MS007153 56 Ea 8080 maximum pair door

Specify stain color when ordering Natural, Cashew, Wheat, Cocoa, Cabernet, Java

CUSTOM COLOR MATCH Custom stain color match - inhouse factory formulation Add 75 Send physical sample to be matched to your Customer Service Professional. *If we are unable to match your finish using our pre-formulated materials, additional formulation is available with extended lead time and a set up fee. 13 727S Series Doors - CURRIStain (A1) Temp Rise Flush Door Prices May, 2018

EXTRAS EXTRAS

ASTRAGALS LOCK PREPARATIONS CONTINUED "h" Astragal installed on inactive leaf-Code K on Mortise lock 1 3/8" door G3A* Add 33 h blank K/1 399 Mortise lock 1 3/4" door escutcheon trim G3 Standard h w/E1 strike prep K/E1 336 Mortise lock 1 3/4" door sectional trim G3A* Standard h w/H1 F. Bolt prep K/H1 354 Hotel and master ring cylinder functions Standard h w/E1 H1 prep K/E1/H1 397 Mortise lock edge only preparation G3AEO Standard CAPS — top or bottom Mortise lock reinforce only G3ARO Standard Steel installed flush (with screws per cap) Add 19 Mortise panic exit G12* Add 56 Rim panic reinforce only G11 Add 31 CLOSER Rim panic reinforce with function holes G11* Add 31 Surface mounted, reinforcement only Add 26 Rim vertical rod reinforce only G11A Add 63 Concealed or semi-concealed Add 237 Rim vertical rod with function holes G11A* Add 63 Concealed vertical rods G12A* Add 423 Label Fire Pin (if required) Add 14 FLUSH BOLTS OR SURFACE BOLTS Top and bottom flush bolt ANSI A115.4 H1 Add 61 STRIKES (when used without astragal or with flat bar astragal) 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 Top and bottom surface bolt reinforced only SB Add 41 2 3/4” ANSI lipped strike 1 3/4” E2 Add 43 HINGE PREPARATIONS 3 1/2” ANSI deadlock strike E3 Add 43 4 1/2" standard or heavyweight Standard 2 3/4” ANSI deadlock strike E4 Add 43 5" Hinge standard or heavyweightAdd Each 4 Electric Strike E9* Add 80 1 1/2 pair up to and including 7'6"Standard Electric raceway Add 118 2 pair over 7'6" to 10'0"Standard *Advise of manufacturer and function of hardware Anchor hinge set Hardware function holes do not include trim mounting holes (e.g. McKinney TA792) No drill, no tap Add 142 (e.g. McKinney TA793) No Add UNDERCUTS Continuous hinge preparation(mounting holes field drilled) 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Concealed mountingNo Add All other undercuts per door Add 19 (e.g. McKinney 11, 24) 12 gauge hinge rail available (Specify) No Add VISION KITS-Type 1 Standard Surface mounting Vision kits installed (3/8" pocket) standard rim type kit (e.g. McKinney 21, 53) Add 74 FV Add 298 LOCK PREPARATIONS FNV Add 360 Cylindrical lock 1 3/4” door 161 G2 Standard Cylindrical lock 1 3/4” door lever trim G2B* Standard VISION KITS-Type 2 Standard (Universal lever trim prep .) Vision kits installed-standard rim type kit Deadlock 1 3/4” door tubular 181 G16 Standard (specify 5/8", 7/8", or 1-1/8" pocket) Type 2 Deadlock 1 3/4" door mortise 190 G17 Add 66 FV Add 440 FNV Add 504 14 727S Series Doors - Temp. Rise 250° & 450° Flush Door Prices May, 2018

WIDTH HEIGHT 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Composite core with an "A" edge bevel and exposed seam "S" 68 951 1104 28 .210, 30 edge are standard 34, 36 68 1099 1274 1 3/4" thick doors 38, 310, 250° or 450° rating available. Price is the same, specify rating when ordering 68 1156 1340 40 20, 24, 26, 70 965 1122 28 .210, 30 34, 36 70 1114 1292 EDGE BEVELS AVAILABLE 38, 310, "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge 70 1173 1361 40 20, 24, 26, "B" specify (square both edges) No Charge 72 993 1155 28 .210, 30 34, 36 72 1128 1310 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, NOTE: For other edge bevels refer to Engineered Door Section 72 1183 1373 40 30 80 1302 1520 34, 36 80 1397 1641 OPTIONS 38, 310, 80 1469 1707 40 Galvanneal steel (A60) 18, 16 gauge door Add 75 Galvanized (G90) includes expoxy primer Add 264 "N" Seamless edge filled Add 68 "T" Continuous wire welded Add 108 Visual ID tag Add 4 OVERSIZED DOOR OPTIONS-AVAILABLE AS 450° ON PAGE 18 AND 19 LISTED FIRE LABEL DOORS Label door restrictions per gauge and size can be determined in the current current product brochure . Prices are without closer (CL). LESS CL Underwriters Laboratories ABCDE Add 47 Warnock Hersey ABCDE Add 10 Label construction Add 15

NON STANDARD SIZE DOORS Price as the next largest standard size door

4080 maximum single door 8080 maximum pair door 15 727S Series Doors - Temp. Rise Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Z type blank screw applied Z1 Add 67 Mortise lock 1 3/8" door G3A* Add 33 Z type with strike E1 screw applied Z1E1 Add 110 Mortise lock 1 3/4" door escutcheon G3 Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Mortise lock 1 3/4" door sectional trim G3A* Standard Flat astragal screw applied Add 65 Hotel and master ring cylinder Standard Mortise lock edge only preparation G3AEO Standard CAPS — top or bottom Mortise lock reinforce only G3ARO Standard Steel installed flush (with screws per cap) Add 19 Mortise panic exit G12* Add 56 Rim panic reinforce only G11 Add 31 CLOSER Rim panic reinforce with function holes G11* Add 31 Surface mounted, reinforcement only Add 26 Rim vertical rod reinforce only G11A Add 63 Concealed or semi-concealed Add 237 Rim vertical rod with function holes G11A* Add 63 Concealed vertical rods G12A* Add 423 Label Fire Pin (if required) Add 14 FLUSH BOLTS OR SURFACE BOLTS Top and bottom flush bolt ANSI A115.4 H1 Add 61 STRIKES (when used without astragal or with flat bar astragal) 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 Top and bottom surface bolt reinforced only SB Add 41 2 3/4” ANSI lipped strike 1 3/4” or 1 3/8" door E2 Add 43 HINGE PREPARATIONS 3 1/2” ANSI deadlock strike E3 Add 43 4 1/2" standard or heavyweight Standard 2 3/4” ANSI deadlock strike E4 Add 43 5" Hinge standard or heavyweightAdd Each 4 Electric Strike E9* Add 80 1 1/2 pair up to and including 7'6"Standard Electric raceway Add 118 2 pair over 7'6" to 10'0"Standard *Advise of manufacturer and function of hardware Anchor hinge set Hardware function holes do not include trim mounting holes (e.g. McKinney TA792) No drill, no tap Add 142 (e.g. McKinney TA793) No Add UNDERCUTS Continuous hinge preparation(mounting holes field drilled) 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Concealed mountingNo Add All other undercuts per door Add 19 (e.g. McKinney 11, 24) 12 gauge hinge rail available (Specify) No Add VISION KITS-Type 9 Standard or Optional Type 1 Surface mounting Vision kits installed (3/8" pocket) standard rim type kit (e.g. McKinney 21, 53) Add 74 FV Add 133 LOCK PREPARATIONS FNV Add 159 Cylindrical lock 1 3/4” door 161 G2 Standard Cylindrical lock 1 3/4” door lever trim G2B Standard VISION KITS-Type 10 Standard or Optional Type 2 (Universal lever trim prep .) Vision kits installed -standard rim type kit Deadlock 1 3/4” door tubular 181 G16 Standard (specify 9/16", 13/16", or 1-1/16" pocket) Type 10 Deadlock 1 3/4" door mortise 190 G17 Add 66 (specify 5/8", 7/8", or 1-1/8" pocket) Type 2 FV Add 164 FNV Add 190 16 747S Series Doors - Steel Stiffened Flush Door Prices May, 2018

WIDTH HEIGHT 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Steel stiffened core with an "A" edge bevel and exposed seam "S" 68 629 750 965 28 .210, 30 edge are standard 34, 36 68 780 875 1075 1 3/4" thick doors and 22 gauge stiffeners 38, 310, 20 gauge stiffeners Add 47 68 868 973 1172 40 20, 24, 26, 70 655 782 1001 28 .210, 30 34, 36 70 807 891 1111 EDGE BEVELS AVAILABLE 38, 310, "A" standard (1/8" in 2" lock edge-square hinge edge No Charge 70 895 990 1210 40 20, 24, 26, "B" specify (square both edges) No Charge 72 700 817 1039 28 .210, 30 34, 36 72 822 897 1139 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, NOTE: For other edge bevels refer to Engineered Door Section 72 915 998 1237 40 30 80 884 1026 1308 OPTIONS 34, 36 80 993 1083 1386 Galvanneal steel (A60) 38, 310, 18, 16, and 14 gauge door Add 75 80 1077 1160 1457 40 30 90 1241 1381 1667 Galvanized (G90) includes epoxy primer Add 264 34, 36 90 1329 1417 1719 "N" seamless edge filled Add 68 38, 310, "T" Continuous wire welded Add 108 90 1411 1494 1788 40 30 100 1357 1498 1688 Visual ID tag Add 4 34, 36 100 1445 1535 1783 Label door restrictions per gauge and size can be determined 38, 310, in the current CURRIES product brochure . Prices are without closer (CL). 100 1528 1611 1836 40

OVERSIZED DOOR OPTIONS Underwriters Laboratories ABCDE Add 47 Doors over 4' wide and 8' high are factory crated for protection in transit Warnock Hersey ABCDE Add 10 18 gauge oversized doors are not available 20 minute U .L . or W .H .I Add 10 Doors over 4' wide may be priced as follows: Label construction Add 15 16 gauge CR Steel max size 5'x10' add to next largest size 466 16 gauge RK Steel max size 4' 10"x10' add to next largest size 466 NON STANDARD SIZE DOORS 14 gauge CR Steel max size 5'x10' add to next largest size 466 Price as the next largest standard size door 14 gauge RK Steel max size 4'10"'x10' add to next largest size 466

16 gauge RK max. size 5' x 12' add to the 40 x 100 price 2330 14 gauge RK max size 5'x12' x 12' add to the 40 x 100 price 2330

NOTE: Doors greater than 10' height will be manufactured offsite and shipped separately. Call to verify lead-times, freight cost, and ship schedule 17 747S Series Doors Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Z type blank screw applied Z1 Add 67 Mortise lock 1 3/4" door escutcheon trim G3 Standard Z type with strike E1 screw applied Z1E1 Add 110 Mortise lock 1 3/4" door sectional trim G3A* Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Hotel and master ring cylinder functions Standard Flat astragal screw applied Add 65 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard CAPS — top or bottom Mortise panic exit G12* Add 56 Steel installed flush (with screws per cap) Add 19 Rim panic reinforce only G11 Add 31 Rim panic reinforce with function holes G11* Add 31 CLOSER Rim vertical rod reinforce only G11A Add 63 Surface mounted, reinforcement only Add 26 Rim vertical rod with function holes G11A* Add 63 Concealed or semi-concealed Add 237 Concealed vertical rods G12A* Add 423 DUTCH DOOR (SHELF EXTRA) Add 265 Low profile vertical rod G12B Add 353 Recessed vertical rod G13C Add 387 FLUSH BOLTS OR SURFACE BOLTS Mortise panic ctr & bottom latch G14C Add 89 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Label Fire Pin (if required) Add 14 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 LOUVERS HINGE PREPARATIONS Louver cutout only Add 59 4 1/2" standard or heavyweightStandard Louver cutout surround with channel Add 100 5" Hinge standard or heavyweightAdd Each 4 (label louver requirement) 1 1/2 pair up to and including 7'6" Standard REPLACEMENT DOOR 2 pair over 7'6" to 10'0"Standard 3 Hinge preps Add 22 Anchor hinge set 4 Hinge preps Add 30 (e.g. McKinney TA792) No drill, no tap Add 142 (e.g. McKinney TA793) No Add STRIKES Continuous hinge preparation(mounting holes field drilled) 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 Concealed mounting No Add 2 3/4” ANSI lipped strike 1 3/4” or 1 3/8" door E2 Add 43 (e.g. McKinney 11, 24) 3 1/2” ANSI deadlock strike E3 Add 43 12 gauge hinge rail available (Specify) No Add 2 3/4” ANSI deadlock strike E4 Add 43 Surface mounting Electric Strike E9* Add 80 (e.g. McKinney 21, 53) Add 74 Electric raceway Add 118 Open back strike * Add 89 LOCK PREPARATIONS *Advise of manufacturer and function of hardware Cylindrical lock 1 3/4” door 161 G2Standard Hardware function holes do not include trim mounting holes Cylindrical lock 1 3/4” door lever trim G2B* Standard UNDERCUTS (Universal lever trim prep .) 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Deadlock 1 3/4” door tubular 181 G16Standard All other undercuts per door Add 19 Deadlock 1 3/4" door mortise 190 G17 Add 66 Interconnected lock G25 Add 43 VISION KITS-Type 9 Standard or Optional Type 1 Vision kits installed (3/8" pocket) standard rim type kit FV Add 133 FNV Add 159 HG Add 170 FG Add 241 FL cutout only Add 59 NOTE: For additional window options refer to the Engineered Door Section SWIFT PAC Quantity door pricing is available from the Service Centers Preprinted manufacturered order forms are available in the CURRIES PartnerArea of the website. 18 747S - TR Series Doors - Steel Stiffened Temp. Rise 450° Flush Door Prices May, 2018

WIDTH HEIGHT 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Steel stiffened core with an "A" edge bevel and exposed seam "S" edge are standard 28 .210, 30 68 1008 1200 34, 36 68 1248 1399 1 3/4" thick doors and 22 gauge stiffeners 38, 310, 68 1388 1556 40 20, 24, 26, 70 1047 1250 28 .210, 30 34, 36 70 1289 1425 EDGE BEVELS AVAILABLE 38, 310, "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge 70 1432 1584 40 20, 24, 26, "B" specify (square both edges) No Charge 72 1121 1308 28 .210, 30 34, 36 72 1316 1434 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, NOTE: For other edge bevels refer to Engineered Door Section 72 1465 1598 40 30 80 1416 1641 OPTIONS 34, 36 80 1588 1731 Galvanneal steel (A60) 38, 310, 18, 16, gauge door Add 75 80 1723 1856 40 30 90 1984 2211 Galvanized (G90) includes epoxy primer Add 264 34, 36 90 2127 2268 "N" seamless edge filled Add 68 38, 310, "T" Continuous wire welded Add 108 90 2257 2390 40 30 100 2170 2397 Visual ID tag Add 4 34, 36 100 2313 2453 38, 310, 100 2445 2576 40 Listed Fire Label Doors Label door restrictions per gauge and size can be determined OVERSIZED DOOR OPTIONS in the current current product brochure . Prices are without closer (CL). Doors over 4' wide and 8' high are factory crated for protection in transit Less 18 gauge oversized doors are not available CL Doors over 4' wide may be priced as follows:Warnock Hersey only ABCDE Add 10 16 gauge CR Steel max size 5'x10' add to next largest size 466Label construction Add 15 16 gauge RK Steel max size 4' 10"x10' add to next largest size 466 Maximum 1-1/2 hour fire rating 5' x 10' maximum single door 10' x 10' maximum pair or double egress doors

NON STANDARD SIZE DOORS Price as the next largest standard size door 19 747S TR Series Doors - Temp. Rise Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Z type blank screw applied Z1 Add 67 Mortise lock 1 3/8" door G3A* Add 33 Z type with strike E1 screw applied Z1E1 Add 110 Mortise lock 1 3/4" door escutcheon trim G3 Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Mortise lock 1 3/4" door sectional trim G3A* Standard Flat astragal screw applied Add 65 Hotel and master ring cylinder functions Standard Mortise lock edge only preparation G3AEO Standard CAPS — top or bottom Mortise lock reinforce only G3ARO Standard Steel installed flush (with screws per cap) Add 19 Mortise panic exit G12* Add 56 Rim panic reinforce only G11 Add 31 CLOSER Rim panic reinforce with function holes G11* Add 31 Surface mounted, reinforcement only Add 26 Rim vertical rod reinforce only G11A Add 63 Concealed or semi-concealed Add 237 Rim vertical rod with function holes G11A* Add 63 Concealed vertical rods G12A* Add 423 Label Fire Pin (if required) Add 14 FLUSH BOLTS OR SURFACE BOLTS Top and bottom flush bolt ANSI A115.4 H1 Add 61 STRIKES (when used without astragal or with flat bar astragal) 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 Top and bottom surface bolt reinforced only SB Add 41 2 3/4” ANSI lipped strike 1 3/4” or 1 3/8" door E2 Add 43 HINGE PREPARATIONS 3 1/2” ANSI deadlock strike E3 Add 43 4 1/2" standard or heavyweight Standard 2 3/4” ANSI deadlock strike E4 Add 43 5" Hinge standard or heavyweightAdd Each 4 Electric Strike E9* Add 80 1 1/2 pair up to and including 7'6"Standard Electric raceway Add 118 2 pair over 7'6" to 10'0"Standard *Advise of manufacturer and function of hardware Anchor hinge set Hardware function holes do not include trim mounting holes (e.g. McKinney TA792) No drill, no tap Add 142 (e.g. McKinney TA793) No Add UNDERCUTS Continuous hinge preparation(mounting holes field drilled) 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Concealed mountingNo Add All other undercuts per door Add 19 (e.g. McKinney 11, 24) 12 gauge hinge rail available (Specify) No Add VISION KITS-Type 9 Standard or Optional Type 1 Surface mounting Vision kits installed (3/8" pocket) standard rim type kit (e.g. McKinney 21, 53) Add 74 FV Add 133 LOCK PREPARATIONS FNV Add 159 Cylindrical lock 1 3/4” door 161 G2 Standard Cylindrical lock 1 3/4” door lever trim G2B* Standard VISION KITS-Type 10 Standard or Optional Type 2 (Universal lever trim prep .) Vision kits installed -standard rim type kit Deadlock 1 3/4” door tubular 181 G16 Standard (specify 9/16", 13/16", or 1-1/16" pocket) Type 10 Deadlock 1 3/4" door mortise 190 G17 Add 66 (specify 5/8", 7/8", or 1-1/8" pocket) Type 2 FV Add 164 FNV Add 190 20 767S Stile and Rail Door - 16 Ga. Flush Door Prices May, 2018

WIDTH HEIGHT 3-5/8" Rail 5-5/8" Rail 7-5/8" Rail BOTTOM RAIL(OTHER THAN 12-5/8") 16 GA 16 GA 16 GA 10-5/8", 14-5/8" OR 16-5/8" in 2" increments 26,28, 30 68 1152 1168 1187 1-3/4" thick doors with 22 gauge BR 85 34, 36 68 1240 1258 1277 38, 40 68 1270 1288 1337 GALVANNEAL STEEL A60 26,28, 30 70 1168 1188 1207 ASTM 924 Prime Painted A60 Add 75 34, 36 70 1258 1278 1297 38, 40 70 1288 1307 1353 CENTER RAIL (add per rail) 26,28, 30 72 1232 1249 1268 Per 3-5/8" nominal CR35/8 Add 301 34, 36 72 1288 1307 1353 5-5/8" nominal CR55/8 Add 309 38, 40 72 1297 1317 1373 7-5/8" nominal CR75/8 Add 317 26,28, 30 80 1372 1394 1415 34, 36 80 1431 1449 1467 OPTIONAL GLASS POCKET WIDTH (add per lite) 38, 40 80 1460 1478 1527 1/2" glass to 1" glass - Add per lite DG 97

2'10", 3'10" wide & 6'10" and 7' 10" high CLOSER REINFORCEMENT Price next larger door size 12 GA - 20" C2 Add 29

SPECIAL SIZE Pairs of doors - take one single and multiply by 2 Price next larger size 1. Flush integral glazing standard, 3/8" pocket designed for 1/4" glass Glass not included WELDED ON PLATE ASTRAGAL 2. Head rails and jamb stiles are available in 3-5/8", 5-5/8" or Steel plate welded ot the door 1 Add 85 7-5/8" dimensions (standard is 5-5/8") Inactive leaf strike preparation E1 Add 43 3. Bottom rail is nominal size with 12-5/8" standard. Optional Inactive leaf flush bolt preparation H1 Add 61 10-5/8", 14-5/8" or 16-5/8" in 2" increments Inactive leaf open back strike prep * Add 89 4. (16 CRS) is 16 Ga. Cold roller standard. Option for 16 ga. *Advise of manufacturer and A60 galvaneel steel 5. Stiles and rails have fiberglass insulation. Concealed hardware UL OR WH FIRE LABEL in top rail not available. Prices are without closer (CL) LESS CL 6. Narrow style hardware required on 3-5/8" rails 20 or 45 minute using wire glass UL Add 47 7. Maximum door size is 4080. Only 16 ga is available Maximum 4080 single, 8080 double W Add 10 8. Raceways, electric hinges, and EPT's are not allowed. GP DESIGN (glass top, center rail) Glass top, Center rail GP Add 517 and 3/8" bottom. Steel sandwich panel price includes panel and installation)

2P DESIGN Stile and Rail Center rail, top and bottom 2PSR Add 739 3/8" steel sandwich panel (price includes panel and installation)

NOTE: This product is manufactured offsite and ship separately. Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 21 Notes Flush Door Prices May, 2018 22 777S Series Doors - Trio Steel Stiffened - Fiberglass Filled Flush Door Prices May, 2018

WIDTH HEIGHT 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Steel stiffened core filled with Fiberglass with an "A" edge bevel and 28 .210, 30 68 643 720 1041 exposed seam "S" edge are standard "T" edge is standard on 14 ga.

34, 36 68 777 854 1175 38, 310, 40 68 867 944 1265 1 3/4" thick doors with 22 gauge stiffeners welded to core plate 20, 24, 26, 70 655 732 1053 28 .210, 30 34, 36 70 804 881 1202 EDGE BEVELS AVAILABLE 38, 310, 40 70 892 969 1290 "A" standard (1/8" in 2" lock edge-square hinge edge only No Charge 20, 24, 26, 72 694 771 1092 28 .210, 30 34, 36 72 822 899 1220 38, 310, 40 72 906 983 1304 OPTIONS 20, 24, 26, Galvanneal steel (A60) 80 875 952 1273 Add 75 28 .210, 30 18, 16, and 14 gauge door 34, 36 80 983 1060 1381 Galvanized (G90) includes epoxy primer Add 264 38, 310, 40 80 1073 1150 1471 "N" seamless edge filled Add 68 30 90 1228 1305 1626 "T" Continuous wire welded - 18 & 16 ga.only Add 108 34, 36 90 1343 1420 1741 Visual ID tag Add 4 38, 310, 40 90 1411 1488 1809 LISTED FIRE LABEL DOORS Label door restrictions per gauge and size can be determined NOTE: This product is manufactured offsite and ship separately. in the current product brochure . Prices are without closer (CL). Call to verify lead-times, freight cost, and ship schedule LESS Fire Rating = 4080 max CL

Underwriters Laboratories BCDE Add 47 Underwriters Laboratories A Add 78 Warnock Hersey BCDE Add 10 Warnock Hersey A Add 41 20 minute U .L . or W .H .I . Add 10 Label construction Add 15

NON STANDARD SIZE DOORS Price as the next largest standard size door 23 777S Series Doors Flush Door Prices May, 2018

EXTRAS EXTRAS

ASTRAGALS LOCK PREPARATIONS CONTINUED Z type blank screw applied Z1 Add 67 Mortise lock 1 3/4" door escutcheon G3 Standard ti Z type with strike E1 screw applied Z1E1 Add 110 Mortise lock 1 3/4" door sectional trim G3A* Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Hotel and master ring cylinder Standard fti Flat astragal screw applied Add 65 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard CAPS — top or bottom Mortise panic exit G12* Add 56 Steel installed flush (with screws per cap) Add 19 Rim panic reinforce only G11 Add 31 Rim panic reinforce with function holes G11* Add 31 CLOSER Rim vertical rod reinforce only G11A Add 63 Surface mounted, reinforcement only Add 26 Rim vertical rod with function holes G11A* Add 63 Concealed or semi-concealed Add 237 Concealed vertical rods G12A* Add 423 DUTCH DOOR (SHELF EXTRA) Add 265 Low profile vertical rod G12B Add 353 Recessed vertical rod G13C Add 387 FLUSH BOLTS OR SURFACE BOLTS Mortise panic ctr & bottom latch G14C Add 89 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Label Fire Pin (if required) Add 14 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 LOUVERS HINGE PREPARATIONS Louver cutout only Add 59 4 1/2" standard or heavyweightStandard Louver cutout surround with channel Add 100 5" Hinge standard or heavyweightAdd Each 4 (label louver requirement) 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 10'0" Standard STRIKES Anchor hinge set 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 (e.g. McKinney TA792) No drill, no tap Add 142 2 3/4” ANSI lipped strike 1 3/4” E2 Add 43 (e.g. McKinney TA793) No Add 3 1/2” ANSI deadlock strike E3 Add 43 Continuous hinge preparation(mounting holes field drilled) 2 3/4” ANSI deadlock strike E4 Add 43 Concealed mountingNo Add Electric Strike E9* Add 80 (e.g. McKinney 11, 24) Electric raceway Add 118 Surface mounting Open back strike * Add 89 (e.g. McKinney 21, 53) Add 74 *Advise of manufacturer and function of hardware Hardware function holes do not include trim mounting holes

LOCK PREPARATIONS UNDERCUTS Cylindrical lock 1 3/4” door 161 G2 Standard 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Cylindrical lock 1 3/4” door lever trim G2B*Standard All other undercuts per door Add 19 (Universal lever trim prep .) Deadlock 1 3/4” door tubular 181 G16 Standard VISION KITS-Type 9 Standard -surround channel included Deadlock 1 3/4" door mortise 190 G17 Add 66 Vision kits installed (3/8" pocket) standard rim type kit Interconnected lock G25 Add 43 FV Add 174 FNV Add 200 HG Add 212 FG Add 241 FL cutout only Add 59 24 777SE Series Doors-Trio-E Steel Stiffened-Polyurethane Filled Flush Door Prices May, 2018

WIDTH HEIGHT 18 ga 16 ga 14 ga STANDARD DESCRIPTION Steel stiffened core filled with Polyurethane foam with an "A" edge bevel and 20, 24, 26, 68 807 884 1205 exposed seam "S" edge are standard "T" edge is standard on 14 ga. 28 .210, 30

34, 36 68 905 982 1303 1 3/4" thick doors with 22 gauge stiffeners welded to core plate 38, 310, 40 68 965 1042 1363 20, 24, 26, 70 823 900 1221 28 .210, 30 EDGE BEVELS AVAILABLE 34, 36 70 923 1000 1321 "A" standard (1/8" in 2" lock edge-square hinge edge only) No Charge 38, 310, 40 70 986 1063 1384 OPTIONS 20, 24, 26, Galvanneal steel (A60) 72 871 948 1269 Add 75 28 .210, 30 18, 16, gauge door 34, 36 72 935 1012 1333 Galvanized (G90) includes epoxy primer Add 264 38, 310, 40 72 995 1072 1393 "N" seamless edge filled Add 68 20, 24, 26, 80 1026 1103 1424 "T" Continuous wire welded - 18 & 16 ga.only Add 108 28 .210, 30 34, 36 80 1089 1166 1487 Visual ID tag Add 4 38, 310, 40 80 1153 1230 1551 30 90 1247 1324 1645 LISTED FIRE LABEL DOORS 34, 36 90 1385 1462 1783 Label door restrictions per gauge and size can be determined 38, 310, 40 90 1488 1565 1886 in the current product brochure . Prices are without closer (CL). LESS Fire Rating = 4080 max CL

NOTE: This product is manufactured offsite and ship separately. Underwriters Laboratories BCDE Add 47 Call to verify lead-times, freight cost, and ship schedule Underwriters Laboratories A Add 78 Warnock Hersey BCDE Add 10 20 minute U .L . or W .H .I . Add 10 Label construction Add 15

NON STANDARD SIZE DOORS Price as the next largest standard size door 25 777SE Series Doors Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Z type blank screw applied Z1 Add 67 Mortise lock 1 3/4" door escutcheon trim G3 Standard Z type with strike E1 screw applied Z1E1 Add 110 Mortise lock 1 3/4" door sectional trim G3A* Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Hotel and master ring cylinder functions Standard Flat astragal screw applied Add 65 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard CAPS — top or bottom Mortise panic exit G12* Add 56 Steel installed flush (with screws per cap) Add 19 Rim panic reinforce only G11 Add 31 Rim panic reinforce with function holes G11* Add 31 CLOSER Rim vertical rod reinforce only G11A Add 63 Surface mounted, reinforcement only Add 26 Rim vertical rod with function holes G11A* Add 63 Concealed or semi-concealed Add 237 Concealed vertical rods G12A* Add 423 DUTCH DOOR (SHELF EXTRA) Add 265 Low profile vertical rod G12B Add 353 Recessed vertical rod G13C Add 387 FLUSH BOLTS OR SURFACE BOLTS Mortise panic ctr & bottom latch G14C Add 89 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Label Fire Pin (if required) Add 14 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 LOUVERS HINGE PREPARATIONS Louver cutout only Add 59 4 1/2" standard or heavyweightStandard Louver cutout surround with channel Add 100 5" Hinge standard or heavyweightAdd Each 4 (label louver requirement) 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 10'0" Standard STRIKES Anchor hinge set 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 (e.g. McKinney TA792) No drill, no tap Add 142 2 3/4” ANSI lipped strike 1 3/4” E2 Add 43 (e.g. McKinney TA793) No Add 3 1/2” ANSI deadlock strike E3 Add 43 Continuous hinge preparation(mounting holes field drilled) 2 3/4” ANSI deadlock strike E4 Add 43 Concealed mountingNo Add Electric Strike E9* Add 80 (e.g. McKinney 11, 24) Electric raceway Add 118 Surface mounting Open back strike * Add 89 (e.g. McKinney 21, 53) Add 74 *Advise of manufacturer and function of hardware Hardware function holes do not include trim mounting holes

LOCK PREPARATIONS UNDERCUTS Cylindrical lock 1 3/4” door 161 G2 Standard 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Cylindrical lock 1 3/4” door lever trim G2B*Standard All other undercuts per door Add 19 (Universal lever trim prep .) Deadlock 1 3/4” door tubular 181 G16 Standard VISION KITS-Type 9 Standard -surround channel included Deadlock 1 3/4" door mortise 190 G17 Add 66 Vision kits installed (3/8" pocket) standard rim type kit Interconnected lock G25 Add 43 FV Add 174 FNV Add 200 HG Add 212 FG Add 241 FL cutout only Add 59 26 847S Series Doors Flush Door Prices May, 2018

WIDTH HEIGHT 20 GA 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Steel stiffened core with an "G" edge bevel and exposed seam "S" edge 68 1632 28 .210, 30 are standard 34, 36 68 1815 Insulated with one pound density fiberglass 38, 310, 40 68 1878 1 3/4" thick doors and 18 gauge stiffeners 20, 24, 26, Stiffeners are 4" center line with 4" weld centers on face. 70 1632 28 .210, 30 Welded flush top channel standard 34, 36 70 1815 38, 310, 40 70 1878 EDGE BEVELS AVAILABLE 20, 24, 26, "G" (1/8" in 2" bevel both edges) Standard 72 1670 28 .210, 30 34, 36 72 1838 OPTIONS 38, 310, 40 72 1898 Galvanneal steel (A60) 30 80 1756 14 gauge door Add 75 34, 36 80 1848 Galvanized (G90) includes epoxy primer Add 264 38, 310, 40 80 2008 "N" seamless edge filled Add 68 30 90 2312 "T" Continuous wire welded Add 108 34, 36 90 2405 Visual ID tag Add 4 38, 310, 40 90 2567 30 100 2493 Listed Fire Label Doors 34, 36 100 2585 Label door restrictions per gauge and size can be determined 38, 310, 40 100 2746 in the current current product brochure . Prices are without closer (CL).

OVERSIZED DOOR OPTIONS Less Doors over 4' wide and 8' high are factory crated for protection in transit CL Underwriters Laboratories ABCDE Add 47 Doors over 4' wide may be priced as follows: Warnock Hersey ABCDE Add 10 14 gauge CR Steel max size 5'x10' add to next largest size 466 20 minute U.L. or W.H.I. Add 10 14 gauge RK Steel max size 4' 10"x10' add to next largest size 466 Label construction Add 15 Larger door sizes are available 847 series. Contact Factory for quote NON STANDARD SIZE DOORS Price as the next largest standard size door 27 847S Series Doors Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Z type blank screw applied Z1 Add 67 Mortise lock 1 3/4" door escutcheon trim G3 Standard Z type with strike E1 screw applied Z1E1 Add 110 Mortise lock 1 3/4" door sectional trim G3A* Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Hotel and master ring cylinder functions Standard Flat astragal screw applied Add 65 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard CAPS — top cap welded flush Standard Mortise panic exit G12* Add 56 Bottom cap installed with screws Add 19 Rim panic reinforce only G11 Add 31 Bottom cap welded flush Add 36 Rim panic reinforce with function holes G11* Add 31 CLOSER Rim vertical rod reinforce only G11A Add 63 Surface mounted, reinforcement only Add 26 Rim vertical rod with function holes G11A* Add 63 Concealed or semi-concealed Add 237 Concealed vertical rods G12A* Add 423 DUTCH DOOR (SHELF EXTRA) Add 265 Label Fire Pin (if required) Add 14

FLUSH BOLTS OR SURFACE BOLTS Top and bottom flush bolt ANSI A115.4 H1 Add 61 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 LOUVERS HINGE PREPARATIONS Louver cutout only Add 59 4 1/2" standard or heavyweightStandard Louver cutout surround with channel Add 100 5" Hinge standard or heavyweightAdd Each 4 (label louver requirement) 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 10'0" Standard STRIKES Anchor hinge set 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 (e.g. McKinney TA792) No drill, no tap Add 142 2 3/4” ANSI lipped strike 1 3/4” E2 Add 43 (e.g. McKinney TA793) No Add 3 1/2” ANSI deadlock strike E3 Add 43 Continuous hinge preparation(mounting holes field drilled) 2 3/4” ANSI deadlock strike E4 Add 43 Concealed mountingNo Add Electric Strike E9* Add 80 (e.g. McKinney 11, 24) Electric raceway Add 118 12 gauge hinge rail standardNo Add Open back strike * Add 89 Surface mounting *Advise of manufacturer and function of hardware (e.g. McKinney 21, 53) Add 74 Hardware function holes do not include trim mounting holes

LOCK PREPARATIONS UNDERCUTS Cylindrical lock 1 3/4” door 161 G2 Standard 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add Cylindrical lock 1 3/4” door lever trim G2B*Standard All other undercuts per door Add 19 (Universal lever trim prep .) Deadlock 1 3/4” door tubular 181 G16 Standard VISION KITS-Type 9 Standard -surround channel included Deadlock 1 3/4" door mortise 190 G17 Add 66 Vision kits installed (3/8" pocket) standard rim type kit FV Add 173 FNV Add 198 HG Add 210 FG Add 238 FL cutout only Add 58 NOTE: For additional window options refer to the Engineered Door Section. 28 857S Series Doors - 2" Steel Stiffened Flush Door Prices May, 2018

WIDTH HEIGHT 14 ga STANDARD DESCRIPTION 20, 24, 26, Steel stiffened core with an "G" edge bevel and exposed seam "S" 68 1854 28 ,10, 30 edge are standard Insulated with one pound density fiberglass 34, 36 68 2044 38, 310, 40 68 2107 2" thick doos with 18 gauge stiffeners for use with 2-3/16" frame rabbet 20, 24, 26, complies with Commercial Security Hollow Metal Specification HMMA-862-87 70 1854 28, 210, 30 When supplied "T" Welded Edge.Welded Flush Top Channel Standard 34, 36 70 2044 38, 310, 40 70 2107 EDGE BEVELS AVAILABLE 20, 24, 26, 72 1898 28, 210, 30 "A standard (1/8" in 2" lock edge-square hinge edge) No Charge 34, 36 72 2064 "B" specify (Square both edges) No Charge 38, 310, 40 72 2128 NOTE: For other edge bevels refer to Engineered Door Section 30 80 1982 34, 36 80 2077 OPTIONS 38, 310, 40 80 2238 Galvanneal steel (A60) 14 gauge door Add 75 OVERSIZED DOOR OPTIONS "N" seamless edge filled Add 68 Doors over 4' wide and 8' high are factory crated for protection in transit "T" Continuous wire welded Add 108 Visual ID tag Add 4 Doors over 4' wide may be priced as follows: 14 gauge CR Steel max size 5'x10' add to next largest size 466 Listed Fire Label Doors - Singles Only 14 gauge RK Steel max size 4' 10"x10' add to next largest size 466 Label door restrictions per gauge and size can be determined Larger door sizes are available 847 series. in the current product brochure . Prices are without closer (CL). Contact Factory for quote Less CL Underwriters Laboratories ABCDE Add 47 Warnock Hersey ABCDE Add 10 20 minute U.L. or W.H.I. Add 10 Label construction Add 15

NON STANDARD SIZE DOORS Price as the next largest standard size door 29 857S Series Doors Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Z type blank screw applied Z1 Add 67 Mortise lock 2" door escutcheon trim G3 Standard Z type with strike E1 screw applied Z1E1 Add 110 Mortise lock 2" door sectional trim G3A* Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Hotel and master ring cylinder Standard Flat astragal screw applied Add 65 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard CAPS — topcap welded flush Standard Mortise panic exit G12* Add 56 Bottom cap installed with screws Add 19 Rim panic reinforce only G11 Add 31 Bottom cap welded flush Add 36 Rim panic reinforce with function holes G11* Add 31 CLOSER Rim vertical rod reinforce only G11A Add 63 Surface mounted, reinforcement only Add 26 Rim vertical rod with function holes G11A* Add 63 Concealed or semi-concealed Add 237 Concealed vertical rods G12A* Add 423 DUTCH DOOR (SHELF EXTRA) Add 265 Label Fire Pin (if required) Add 14

FLUSH BOLTS OR SURFACE BOLTS LOUVERS Top and bottom flush bolt ANSI A115.4 H1 Add 61 Louver cutout only Add 59 (when used without astragal or with flat bar astragal) Louver cutout surround with channel Add 100 Top and bottom surface bolt reinforced only SB Add 41 (label louver requirement) HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard STRIKES 5" Hinge standard or heavyweight Add Each 4 4 7/8” ANSI lipped strike 1 3/4” door E1 Add 43 1 1/2 pair up to and including 7'6" Standard 2 3/4” ANSI lipped strike 1 3/4” E2 Add 43 2 pair over 7'6" to 10'0" Standard 3 1/2” ANSI deadlock strike E3 Add 43 Anchor hinge set 2 3/4” ANSI deadlock strike E4 Add 43 (e.g. McKinney TA792) No drill, no tap Add 142 Electric Strike E9* Add 80 (e.g. McKinney TA793) No Add Electric raceway Add 118 Continuous hinge preparation(mounting holes field drilled) Open back strike * Add 89 Concealed mounting No Add *Advise of manufacturer and function of hardware (e.g. McKinney 11, 24) Hardware function holes do not include trim mounting holes 12 gauge hinge rail standard No Add Surface mounting UNDERCUTS (e.g. McKinney 21, 53) Add 74 2” doors - 5/8" standard, 3/8", 3/4" available No Add All other undercuts per door Add 19 LOCK PREPARATIONS Cylindrical lock 2” door 161 G2 Standard VISION KITS-Type 3,4, 7, or 8 Cylindrical lock 2” door lever trim G2B* Standard Vision kits installed, add per type and size (Universal lever trim prep .) Deadlock 2” door tubular 181 G16 Standard Deadlock 2" door mortise 190 G17 Add 66 TYPE 3 TYPE 4 TYPE 7 TYPE 8 Interconnected lock G25 Add 43 FV 201 291 317 317 FNV 250 369 396 396 HG 274 466 484 484 FG 432 748 790 790 30 797S Series - Mercury Steel Reinforced-Polyurethane Filled Flush Door Prices September, 2019

WIDTH HEIGHT 18 ga 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, Steel reinforced core filled with Polyurethane foam with an "A" edge bevel and exposed 28.210, 30 68 728 805 1126 seam "S" edge are standard "T" edge is standard on 14 ga. 1 3/4" thick doors. 34, 36 68 817 894 1215 38, 310, 40 68 872 949 1270 EDGE BEVELS AVAILABLE 20, 24, 26, "A" standard (1/8" in 2" lock edge-square hinge edge only) No Charge 70 743 820 1141 28.210, 30 34, 36 70 832 909 1230 OPTIONS 38, 310, 40 70 889 966 1287 Galvanneal steel (A60) 20, 24, 26, 72 785 862 1183 18, 16, and 14 gauge door Add 75 28.210, 30 34, 36 72 843 920 1241 Galvanized (G90) includes epoxy primer Add 264 38, 310, 40 72 898 975 1296 "N" seamless edge filled Add 68 20, 24, 26, 80 926 1003 1324 "T" Continuous wire welded - 18 & 16 ga.only Add 108 28.210, 30 34, 36 80 982 1059 1380 Visual ID tag Add 4 38, 310, 40 80 1040 1117 1438 30 90 1125 1202 1523 LISTED FIRE LABEL DOORS 34, 36 90 1249 1326 1647 Label door restrictions per gauge and size can be determined 38, 310, 40 90 1342 1419 1740 in the current product brochure. Prices are without closer (CL). LESS CL

NOTE: This product is manufactured offsite and ship separately. Underwriters Laboratories ABCDE Add 47 Call to verify lead-times, freight cost, and ship schedule Warnock Hersey ABCDE Add 10 20 minute U.L. or W.H.I. Add 10 Label construction Add 15 Verify label door limitations

NON STANDARD SIZE DOORS Price as the next largest standard size door 31 797S Series -Mercury Steel Reinforced-Polyurethane Filled Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS-Not available "B" Bevel LOCK PREPARATIONS CONTINUED Specify "A" bevel, you must "hand" doors Mortise lock 1 3/4" door escutcheon trim G3 Standard Z type blank screw applied Z1 Add 67 Mortise lock 1 3/4" door sectional trim G3A* Standard Z type with strike E1 screw applied Z1/E1 Add 110 Hotel and master ring cylinder functions Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Mortise lock edge only preparation G3AEO Standard Flat astragal screw applied Add 65 Mortise lock reinforce only G3ARO Standard

CAPS — top or bottom Mortise panic exit G12* Add 56 Steel installed flush (with screws per cap) Add 19 Rim panic reinforce only G11 Add 31 Rim panic reinforce with function holes G11* Add 31 CLOSER Rim vertical rod reinforce only G11A Add 63 Surface mounted, reinforcement only Add 26 Rim vertical rod with function holes G11A* Add 63 Concealed or semi-concealed Add 237 Label Fire Pin (if required) Add 14

FLUSH BOLTS LOUVERS -Preparation or installation is not available from the Top and bottom flush bolt ANSI A115.4 H1 Add 61 (when used without astragal or with flat bar astragal) STRIKES Top and bottom surface bolt reinforced only SB Add 41 4 7/8” ANSI lipped strike ( A bevel) E1 Add 43 2 3/4” ANSI lipped strike (A bevel) E2 Add 43 HINGE PREPARATIONS 3 1/2” ANSI deadlock strike E3 Add 43 4 1/2" standard or heavyweight Standard 2 3/4” ANSI deadlock strike E4 Add 43 5" Hinge standard or heavyweightAdd Each 4 Electric Strike (A bevel) E9* Add 80 Electric raceway Add 118 LOCK PREPARATIONS Open back strike (A bevel) * Add 89 Cylindrical - 161 G2 Standard Cylindrical lock - lever trim holes G2BStandard *Advise of manufacturer and function of hardware (Universal lever trim prep .) Deadlock - tubular 181 G16 Standard UNDERCUTS Deadlock - mortise 190 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add (e.g. Sargent 4870) G17 Add 66 All other undercuts per door Add 19 Interconnected lock G25 Add 43 VISION KITS-Type 9 Standard Vision kits installed (3/8" pocket) standard rim type kit FV Add 133 FNV Add 159 HG Add 170 NOTE: For additional window options refer to the Engineered Door Section 32 797S Embossed Panel 18-16-Mercury Energy Efficient Flush Door Prices September, 2019

STANDARD DESCRIPTION Galvanneal (A40) Steel 18 or 16 gauge steel Polyurethane core with a "B" edge bevel S exposed edge seam. 1 3/4" thick doors only Type 9 kit included on doors with lites See Engineered Door Section for other options

EDGE BEVELS AVAILABLE "A" Standard 1/8" in 2" lock edge-square hinge edge No charge "B" (square both edges) No charge EDGE OPTIONS "N" Seamless edge filled Add 68 "T" Continuous wire welded Add 108

E6 E6 E62TL E62FNVS E6HGS E8 W H 18 GALV 16 GALV 18 GALV. 18 GALV 18 GALV 18 GALV. 26, 28, 30 68 898 975 1246 1462 1180 898 26, 28, 30 70 913 990 1261 1477 1195 913

3068 ADA Compliant Door ADA Add 25 `

LISTED FIRE LABEL DOORS Label door restrictions per gauge and size can be determined in the General information Section. Prices are without closer (CL).

LESS CL Underwriters Laboratories ABCDE Add 47 Warnock Hersey ABCDE Add 10 20 minute U.L. or W.H.I. Add 10 Label Construction Add 15 Verify label door limitations

NON STANDARD SIZE DOORS- contact factory OVERSIZED DOOR OPTIONS-not available

NOTE: This product is manufactured offsite and ship separately. Call to verify lead-times, freight cost, and ship schedule 33 797S Embossed Panel 18-16-Mercury Energy Efficient Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS-Not available "B" Bevel LOCK PREPARATIONS CONTINUED Specify "A" bevel, you must "hand" doors Mortise lock 1 3/4" door escutcheon trim G3 Standard Z type blank screw applied Z1 Add 67 Mortise lock 1 3/4" door sectional trim G3A* Standard Z type with strike E1 screw applied Z1/E1 Add 110 Hotel and master ring cylinder functions Standard Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 Mortise lock edge only preparation G3AEO Standard Flat astragal screw applied Add 65 Mortise lock reinforce only G3ARO Standard

CAPS — top or bottom Mortise panic exit G12* Add 56 Steel installed flush (with screws per cap) Add 19 Rim panic reinforce only G11 Add 31 Rim panic reinforce with function holes G11* Add 31 CLOSER Rim vertical rod reinforce only G11A Add 63 Surface mounted, reinforcement only Add 26 Rim vertical rod with function holes G11A* Add 63 Concealed or semi-concealed Add 237 Label Fire Pin (if required) Add 14

FLUSH BOLTS LOUVERS -Preparation or installation is not available from the factory Top and bottom flush bolt ANSI A115.4 H1 Add 61 (when used without astragal or with flat bar astragal) STRIKES Top and bottom surface bolt reinforced only SB Add 41 4 7/8” ANSI lipped strike ( A bevel) E1 Add 43 2 3/4” ANSI lipped strike (A bevel) E2 Add 43 HINGE PREPARATIONS 3 1/2” ANSI deadlock strike E3 Add 43 4 1/2" standard or heavyweight Standard 2 3/4” ANSI deadlock strike E4 Add 43 5" Hinge standard or heavyweightAdd Each 4 Electric Strike (A bevel) E9* Add 80 Electric raceway Add 118 LOCK PREPARATIONS Open back strike (A bevel) * Add 89 Cylindrical - 161 G2 Standard Cylindrical lock - lever trim holes G2BStandard *Advise of manufacturer and function of hardware (Universal lever trim prep .) Deadlock - tubular 181 G16 Standard UNDERCUTS Deadlock - mortise 190 1 3/4” doors - 5/8" standard, 3/8", 3/4" available No Add (e.g. Sargent 4870) G17 Add 66 All other undercuts per door Add 19 Interconnected lock G25 Add 43 34 797S 1, 2, and 3-Panel Embossed 18 ga - Mercury Energy Efficient High Definition Embossed Panel Flush Door Prices September, 2019

FLUSH BOLTS OR SURFACE BOLTS Top and bottom flush bolt ANSI A115.4 H1 Add 61 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 ADA Compliant 1 or 2 panel - 6'8" only Add 25

HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard 3P LOCK PREPARATIONS POLYURETHANE CORE - STANDARD Cylindrical 161 G2 Standard 3068 898 898 983 983 Cylindrical lock-lever trim holes G2B Standard 3070 913 913 998 998 (Universal lever trim prep.) 3080* 1099 1099 1185 1185 Deadlock tubular 181 G16 Standard *Cannot Be Fire-Rated Deadlock mortise 190 (e.g. Sargent 4870) G17 Add 66 STANDARD DESCRIPTION Interconnected lock G25 Add 43 Galvanneal (A40) steel 18 ga. Mortise lock 1 3/4" door escutcheon trim G3 Standard Polyurethane Core Optional (cannot be fire rated over 7') Mortise lock 1 3/4" door sectional trim G3A* Standard Edge bevel available Hotel and master ring cylinder functions Standard "A" 1/8" in 2" lock edge - sqaure hinge edge Mortise lock edge only preparation G3AEO Standard "B" Square both edges Note: Mortise lock preps 30 wide door only EDGE OPTIONS Rim panic reinforce only G11 Add 31 "S" Exposed edge seam N/C Rim panic reinforce with function holes G11* Add 31 "N" Exposed seam 68 Rim vertical rod reinforce only G11A Add 63 "T" Exposed seam 108 Rim vertical rod with function holes G11A* Add 63 Listed Fire Label Doors Label Fire Pin (if required) Add 14 Label door restrictions per gauge and size can be determined LOUVERS: -preparation or installation is not available from the factory in the current CURRIES product brochure. Prices are without closer (CL). LESS STRIKES Verify label door limitations CL 4 7/8” ANSI lipped strike (A bevel) E1 Add 43 Underwriters Laboratories ABCDE Add 47 2 3/4” ANSI lipped strike (A bevel) E2 Add 43 Warnock Hersey ABCDE Add 10 3 1/2” ANSI deadlock strike E2 Add 43 20 minute U.L. or W.H.I. Add 10 2 3/4” ANSI deadlock strike E4 Add 43 Label Construction Add 15 Electric Strike (A bevel) E9* Add 80 Electric raceway Add 118 ASTRAGALS-Not available "B" Bevel *Advise of manufacturer and function of hardware Specify "A" Bevel you must "hand" doors Z type blank screw applied Z1 Add 67 UNDERCUTS Z type with strike E1 screw applied Z1/E1 Add 110 1 3/4” doors - minimum 3/4" No Add Z type with strike and flush bolt screw applied Z1/E1/H1 Add 171 All other undercuts per door Add 19 Flat astragal screw applied Add 86 NOTE: Charges waived when quantities exceed 24 doors with any CAPS — top or bottom combination of non standard undercut. Steel installed flush Add 19 VISION KITS-Type 9 (only available on 2P panel design) CLOSER 3/8" Pocket HG (2PHG) Add 282 Surface mounted, reinforcement only Add 26

NOTE: This product is manufactured offsite and ship separately. Call to verify lead-times, freight cost, and ship schedule i Index Frame Prices May, 2018

DESCRIPTION PAGE

Masonry M-18 KD — Masonry Flush Frames and Components General Informaiton & Extras 2 Extras Continued 3 M-16 KD — Masonry Flush Frames and Components General Information and Extras 4 Extras Continued 5 M-14 KD — Masonry Flush Frames and Components General Information and Extras 6 Extras Continued 7 M-12 SMO — Masonry Flush Frames and Components General Information and Extras 8 Extras Continued 9 Masonry Borrowed Lites M-16 KD 10 M-14 KD 11

Drywall C-18 KD — Drywall Frames and Components General Information and Extras 12 Extras Continued 13 C-16 KD — Drywall Frames and Components General Information and Extras 14 Extras Continued 15 C-16 KD SideLight Frames General Information and Extras 16 Extras Continued 17 C-14 KD — Drywall Frames and Components General Information and Extras 18 Extras Continued 19 Drywall Borrowed Lites C-16 KD 20 C-14 KD 21

Masonry / Drywall CM-18 KD — Drywall/Masonry Frames and Components General Information and Extras 22 Extras Continued 23 CM-16 KD — Drywall/Masonry Frames and Components General Information and Extras 24 Extras Continued 25 CM-14 KD — Drywall/Masonry Frames and Components General Information and Extras 26 Extras Continued 27

E119 Fire Resistive Frames 28-29 2 M-18 KD Frames Frame Prices May, 2018

3 6-1/8 8 GENERAL INFORMATION WIDTH HEIGHT 5-3/4 THRU THRU THRU CURRIES M series frames are available double rabbet (equal or unequal) single rabbet, cased opening, nailer frame, or double egress profile. Prices reflect 6 7-7/8 9-7/8 hardware preparations for 1 3/4" or 1 3/8" doors. Refer to CURRIES Architectural 1'6" 6'8" 157 168 175 226 Technical Data Manual for standard details and limitations. 7' 164 THRU 176 186 235 7'2" 167 179 190 253 EXPANDED KD CAPABILITIES 3'0" 8' 195 205 220 284 • 2" Face unequal rabbet profiles are standard. 6'8" 160 3' + 172 179 234 • Identical profile jambs and heads 1" face through 2" face in 1/8" increments are SINGLES 7' 167 THRU 180 190 243 now available KD, M, G, NM, and MK profile. 7'2" 170 183 194 261 4'0" 8' 198 209 224 292 • Identical profile jambs and heads are available 2-1/8" face through 4" face in 1/8" increments KD, in M, G, N, and MK profile. Add 25% to the 2" face frame base price 4' + 6'8" 202 210 218 289 7' 210 (i.e.: faces may be unequal, 1-1/2" face door side and 3-1/4" face opposite, but THRU 220 232 297 7'2" 212 222 236 315 identical profile, jambs to head). 6'0" 8' 250 258 274 355 • Returns can vary 7/16" minimum through 1" maximum. Add 15%. 6' + 6'8" 208 217 225 303 DOUBLES 7' 216 THRU 227 239 311 • Rabbets can vary 5/8" minimum and 6" maximum for the non door rabbet. 7'2" 218 229 243 329 8'0" 8' 256 265 281 369 Contact factory for bend limitations on any KD profiles with rabbets exceeding 6". A FRAME COMPONENT PART PRICES (NO ANCHORS) 15% add is applicable to frame price for returns and or rabbets. Jamb depth ranges are listed above each column. 1/8" increment jamb depths (all ranges 3" thru 9-7/8") 6'8" 54 58 61 77 are available at no extra charge. 7' 57 61 65 82 7'2" 59 63 67 91 JAMBS STRIKE 8' 66 69 76 100 6'8" 63 66 68 91 7' 67 71 75 95 7'2" 68 72 77 104 HINGE JAMBS 8' 85 88 94 122 1'6" THRU 3'0" 28 32 34 46 3'+ THRU 4'0" 31 36 38 54 ANCHORS - foot clips are welded in place. 4'+ THRU 6'0" 64 66 70 95 Standard loose jamb anchors are included in these prices; HEADS 6'+ THRU 8'0" 70 73 77 109 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor information is listed in the Engineered Frame Section. Welding charge only per anchor Add 2 (Add for appropriate anchor)

EXTRAS BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, 4F component bundling or welded frames Add 4 Visual ID tags Add 4

CASED OPENING FRAMES (4 1/2" - 9 7/8") MK Per frame Add 12 Per piece Add 4 Cased opening price includes standard mortise hardware preparations, hinges and strikes or blank.

COMMUNICATING FRAME (4 7/8" - 9 7/8") Available for 1 3/8" or 1 3/4" doors N/C 3 M-18 KD Frames Frame Prices

May, 2018

EXTRAS EXTRAS CURRISEAL FRAME (4 1/8” - 14”) Gasketed frame price includes gasket. THERMAL BREAK FRAMES - NOT AVAILABLE Available for 1 3/4” door Singles up to (including) 3072 Add 122 HARDWARE PREPARATIONS Singles up to (including) 4080 Add 128 CLOSER PREPARATIONS Pairs up to (including) 6072 Add 128 Concealed closer Add 184 Pairs up to (including) 8072 Add 131 Regular arm E10 Add 19 Additional gasket prices and stock numbers are listed in the Parallel arm E11 Add 19 Engineered Frame Section. Half sleeve E18 Add 26 Full sleeve E17 Add 33 DOUBLE EGRESS (4 3/4" - 9 7/8") FLUSH BOLTS Available for 1 3/4" doors Standard ANSI 115.4 H2 Add 40 Per frame Add 414 Reversible (strike plate included) H5 Add 40 Reinforce only Per hinge jamb Add 102 H1 Add 19 HINGE PREPARATIONS Per splice welded head Add 210 3 1/2" 1 pair or 1 1/2 pair Standard Anchors in head required for fire rating 4 1/2" standard or heavyweight Standard DUTCH DOOR FRAME N/C 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 8'0" Standard FOUR (4") INCH FACE HEADS (4-3/4" - 9-7/8") JAMB 5" standard or heavyweight Add Ea 4 Available for 1 3/8" or 1 3/4" doors Full surface mounted continuous hinge reinforcement Add 56 Single including 4'0"Add 35 High frequency reinforcement strap support Pairs over 4'0" Add 49Per hinge Ads 16

GALVANNEAL (A60) FRAME ADDS HOLDERS Price per frame piece Add 12 Overhead conceled Add 123 Price per 3-Sided frame Add 36 Overhead stop & holder surface mounted 14 ga Add 19 Double egress Add 48 PIVOTS GALVANIZED (G-90) Top & bottom set single acting Per frame Add 160 Price per frame piece Add 20 Per jamb Add 68 Price per 3 sided frame Add 60 Per head Add 92 Double egress Add 80 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING FIRE FRAME LABELS Rim Type E8 Add 13 Warnock Hersey - Specify on order Rim vertical rod surface mounted strike E5 Add 19 Embossment; no hourly or 1-1/2 hour rating Standard Vertical rod mortise strike in head - Each G20 Add 47 Metal label with hourly rating on hinge jamb Add 17 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock srike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric Strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 WELDED ASSEMBLIES (3 SIDED FRAMED) Seam Weld Die Miter (KD) SW Add 66 Full Weld Die Miter (KD) FW Add 116 4 M-16 KD Frames Frame Prices May, 2018

3 6-1/8 8 10 12 GENERAL INFORMATION CURRIES M series frames are available double rabbet (equal or WIDTH HEIGHT 5-3/4 THRU THRU THRU THRU THRU unequal) single rabbet, cased opening, nailer frame, or double egress 6 7-7/8 9-7/8 11-7/8 14 profile. Prices reflect hardware preparations for 1 3/4" or 1 3/8" doors. Refer to CURRIES Architec tural Technical Data Manual for standard 6'8" 170 181 198 228 270 312 details and limitations. 185 207 237 278 321 1'6" 7' 173 7'2" 186 197 212 241 284 326 EXPANDED KD CAPABILITIES THRU 8' 214 225 245 271 304 348 • 2" Face unequal rabbet profiles are standard. 3'0" 9' 222 234 255 284 318 361 • Identical profile jambs and heads 1" face through 2" face in 1/8" 10' 233 245 268 293 329 371 increments are now available KD, M, G, NM, and MK profile. 6'8" 179 190 205 236 276 317 SINGLES 3' + 7' 182 194 214 245 284 326 • Identical profile jambs and heads are available 2-1/8" face through 4" 7'2" 195 206 219 249 290 331 face in 1/8" increments KD, in M, G, N, and MK profile. Add 25% to the THRU 8' 223 234 252 279 310 353 2" face frame base price (i.e.: faces may be unequal, 1-1/2" face door 4'0" 9' 231 243 262 292 324 366 side and 3-1/4" face opposite, but identical profile, jambs to head). 10' 242 254 275 301 335 376 • Returns can vary 7/16" minimum through 1" maximum. Add 15%. 6'8" 219 230 250 287 340 393 4' + 7' 223 234 256 297 346 399 • Rabbets can vary 5/8" minimum and 6" maximum for the non door 7'2" 233 242 260 301 352 405 rabbet. Contact factory for bend limitations on any KD profiles with THRU 8' 271 282 308 341 384 439 rabbets exceeding 6". A 15% add is applicable to frame price for returns 6'0" 9' 279 290 318 355 398 451 and or rabbets. Jamb depth ranges are listed above each column. 1/8" increment jamb depths (all ranges 3" thru 14") are available at no extra 10' 289 302 330 363 408 461 charge. 6'8" 235 246 264 302 351 403 6' + 7' 239 250 270 312 357 409 7'2' 249 258 274 316 363 415 THRU 8' 287 298 322 356 395 449 8'0" DOUBLES 9' 295 306 332 370 409 461 10' 305 318 344 378 419 471 6'8" 257 269 287 327 371 416 ANCHORS - foot clips are welded in place. 8' + 7' 261 273 293 337 377 422 7'2' 271 281 297 341 383 428 Standard loose jamb anchors are included in these prices; THRU 8' 309 321 345 381 415 462 3 per jamb up to 7'6" and 4 per jamb over 7'6". 10'0" 9' 317 329 355 395 429 474 Complete anchor information is listed in the Engineered Frame Section. 10' 327 341 367 403 439 484 FRAME COMPONENT PART PRICES (NO ANCHORS) Welding charge only per anchor Add 2 6'8" 59 62 68 80 94 109 (Add for appropriate anchor) 7' 60 64 74 84 99 115 7'2" 68 72 77 86 102 117 EXTRAS 8' 75 78 84 94 104 120 BUNDLING AND TAGGING FRAMES 9' 79 83 89 100 111 127 Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, 4F

STRIKE JAMBS 10' 85 88 96 105 117 132 BL, and 4F component bundling or 6'8" 69 73 77 87 103 118 or welded frames Add 4 7' 71 75 80 92 106 121 Visual ID tags Add 4 7'2" 76 79 82 94 109 124 CASED OPENING FRAMES (4 1/2" - 14") 8' 93 97 104 112 123 139 Per frame Add 12 9' 97 101 109 119 130 145 Per Piece Add 4 HINGE JAMBS 10' 102 107 115 123 135 150 Cased opening price includes standard mortise hardware preparations, 1'6" THRU 3'0" 30 34 41 49 61 73 hinges and strikes or blank. 3'+ THRU 4'0" 39 43 48 57 67 78 4'+ THRU 6'0" 69 72 84 101 122 145 COMMUNICATING FRAME (4 7/8" - 14")

HEADS 6'+ THRU 8'0" 85 88 98 116 133 155 Available for 1 3/8" or 1 3/4" doors N/C 8'+ THRU 10'0" 107 111 121 141 153 168 5 M-16 KD Frames Frame Prices May, 2018 EXTRAS EXTRAS CURRISEAL FRAME (4 1/8” - 14”) MERCURY THERMAL BREAK FRAMES - (5 3/4"-14") Gasketed frame price includes gasket. Price galvanneal A60 frame TQ Add 537 Available for 1 3/4” door Per jamb A60 Add 179 Singles up to (including) 3072 Add 122 Per head A60 Add 179 Singles up to (including) 4080 Add 128 NOTE: Mercury frame is manufactured offsite and ships separately. Pairs up to (including) 6072 Add 128 Call to verify lead-times and ship schedule Pairs up to (including) 8072 Add 131 Aditional gasket prices and stock numbers are listed in the HARDWARE PREPARATIONS Engineered Frame Section. CLOSER PREPARATIONS Concealed closer Add 184 DOUBLE EGRESS (4 3/4" - 14") Regular arm E10 Add 19 Available for 1 3/4" doors Parallel arm E11 Add 19 Per frame Add 414 Half sleeve E18 Add 26 Per hinge jamb Add 102 Full sleeve E17 Add 33 Per splice welded head Add 210 FLUSH BOLTS Anchors in head required for fire rating Standard ANSI 115.4 H2 Add 40 DUTCH DOOR FRAME N/C Reversible (strike plate included) H5 Add 40 Reinforce Only H1 Add 19 FOUR (4") INCH FACE HEADS (4-3/4" - 14") JAMB DEPTH HINGE PREPARATIONS Available for 1 3/8" or 1 3/4" doors 4 1/2" standard or heavyweight Standard Single including 4'0" Add 35 1 1/2 pair up to and including 7'6" Standard Pairs over 4'0" Add 49 2 pair over 7'6" to 10'0" Standard 5" standard or heavyweight Add 4 GALVANNEAL (A60) FRAME ADDS Full surface mounted continuous hinge reinforcement Add 56 Price per frame piece Add 12 High frequency reinforcement strap support Price per 3-Sided frame Add 36 Per hinge Add 16 Double egress Add 48 HOLDERS GALVANIZED (G-90) Overhead conceAled Add 123 Price per frame piece Add 20 Overhead stop & holder surface mounted 14 ga Add 19 Price per 3 sided frame Add 60 Double egress Add 80 PIVOTS FIRE FRAME LABELS Top & bottom set single acting Per frame Add 160 Warnock Hersey - Spedify on order Per jamb Add 68 Embossment; no hourly or 1-1/2 hour rating Standard Per head Add 92 Metal label with hourly rating on hinge jamb Add 17 Intermediate pivot single acting Each Add 56 Underwriters Laboratories Prices are less closer (CL) PANIC EXIT REINFORCING LESS Rim Type E8 Add 13 CL Rim vertical rod surface mounted strike E5 Add 19 Single Frame Add 17 Vertical rod mortise strike in head - Each G20 Add 47 Double frame Add 34 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock srike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric Strike frame E9 Add 80 (Includes cover box with knockout)

SURFACE BOLTS Reinforcement only Add 19

WELDED ASSEMBLIES (3 SIDED FRAMED) Seam Weld Die Miter (KD) SW Add 66 Full Weld Die Miter (KD) FW Add 116

Swift Pac quantity frame pricing is available from the service centers 6 M-14 KD Frames Frame Prices May, 2018

3 6-1/8 8 10 12 GENERAL INFORMATION WIDTH HEIGHT 5-3/4 THRU THRU THRU THRU THRU CURRIES M series frames are available double rabbet (equal or unequal) single rabbet, cased opening, nailer frame, or double egress 6 7-7/8 9-7/8 11-7/8 14 profile. Prices reflect hardware preparations for 1 3/4" or 1 3/8" doors. 6'8" 208 219 233 277 318 358 Refer to CURRIES Architec tural Technical Data Manual for standard details and limitations. 1'6" 7' 223 233 245 289 327 370 7'2" 228 238 249 296 332 376 THRU 8' 259 272 291 331 358 405 EXPANDED KD CAPABILITIES 3'0" • 2" Face unequal rabbet profiles are standard. 9' 268 281 303 342 372 413 10' 281 296 319 356 385 428 • Identical profile jambs and heads 1" face through 2" face in 1/8" 6'8" 215 226 238 284 330 366 increments are now available KD, M, G, NM, and MK profile. SINGLES 3' + 7' 230 240 250 296 339 378 7'2" 235 245 254 303 344 384 • Identical profile jambs and heads are available 2-1/8" face THRU through 4" face in 1/8" increments KD, in M, G, N, and MK profile. 8' 266 279 296 338 370 413 4'0" Add 25% to the 2" face frame base price (i.e.: faces may be 9' 275 288 308 349 384 421 unequal, 1-1/2" face door side and 3-1/4" face opposite, but identical 10' 288 303 324 363 397 436 profile, jambs to head). 6'8" 265 274 292 356 407 453 • Returns can vary 7/16" minimum through 1" maximum. Add 15%. 4' + 7' 277 286 300 362 409 461 7'2" 283 292 306 370 415 469 THRU • Rabbets can vary 5/8" minimum and 6" maximum for the non door 8' 327 340 358 420 455 509 6'0" rabbet. Contact factory for bend limitations on any KD profiles with 9' 335 348 374 432 469 517 rabbets exceeding 6". A 15% add is applicable to frame price for 10' 349 364 388 448 485 533 returns and or rabbets. Jamb depth ranges are listed above each 6'8" 278 289 304 371 430 468 column. 1/8" increment jamb depths (all ranges 3" thru 14") are available at no extra charge. 6' + 7' 290 301 312 377 432 476 7'2' 296 307 318 385 438 484 THRU 8' 340 355 370 435 478 524 8'0" DOUBLES 9' 348 363 386 447 492 532 10' 362 379 400 463 508 548 6'8" 307 318 339 404 442 486 ANCHORS - foot clips are welded in place. 8' + 7' 319 330 347 410 444 494 7'2' 325 336 353 418 450 502 Standard loose jamb anchors are included in these prices; THRU 8' 369 384 405 468 490 542 3 per jamb up to 7'6" and 4 per jamb over 7'6". 10'0" 9' 377 392 421 480 504 550 Complete anchor information is listed in the Engineered Frame Section. 10' 391 408 435 496 520 566 FRAME COMPONENT PART PRICES (NO ANCHORS) Welding charge only per anchor Add 2 6'8" 73 77 82 95 109 125 (Add for appropriate anchor) 7' 82 85 90 104 117 133 7'2" 84 87 91 107 119 135 EXTRAS 8' 91 95 105 115 123 142 BUNDLING AND TAGGING FRAMES 9' 96 100 109 120 130 146 Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL,

STRIKE JAMBS 10' 102 107 118 126 135 153 BL, and 4F component bundling or 6'8" 84 87 93 109 124 139 or welded frames Add 4 7' 90 93 97 112 125 143 Visual ID tags Add 4 7'2" 93 96 100 116 128 147 8' 113 118 124 139 146 165 CASED OPENING FRAMES (4 1/2" - 14") 9' 117 122 132 145 153 169 Per frame Add 12 HINGE JAMBS 10' 124 130 139 153 161 177 Per piece Add 4 1'6" THRU 3'0" 39 43 46 61 73 82 Cased opening price includes standard mortise hardware preparations, 3'+ THRU 4'0" 46 50 51 68 85 90 hinges and strikes or blank. 4'+ THRU 6'0" 85 88 94 126 147 163

HEADS 6'+ THRU 8'0" 98 103 106 141 170 178 COMMUNICATING FRAME (4 7/8" - 14") 8'+ THRU 10'0" 127 132 141 174 182 196 Available for 1 3/8" or 1 3/4" doors N/C 7 M-14 KD Frames Frame Prices May, 2018 EXTRAS EXTRAS CURRISEAL FRAME (4 1/8” - 14”) MERCURY THERMAL BREAK FRAMES - (5 3/4"-14") Gasketed frame price includes gasket. Price galvanneal A60 frame TQ Add 537 Available for 1 3/4” door Per jamb A60 Add 179 Singles up to (including) 3072 Add 122 Per head A60 Add 179 Singles up to (including) 4080 Add 128 NOTE: Mercury frame is manufactured offsite and ships separately. Pairs up to (including) 6072 Add 128 Call to verify lead-times and ship schedule Pairs up to (including) 8072 Add 131 Additional gasket prices and stock numbers are listed in the Engineered HARDWARE PREPARATIONS Frame Section. CLOSER PREPARATIONS Concealed closer Add 184 DOUBLE EGRESS (4 3/4" - 14") Regular arm E10 Add 19 Available for 1 3/4" doors Parallel arm E11 Add 19 Per frame Add 414 Half sleeve E18 Add 26 Per hinge jamb Add 102 Full sleeve E17 Add 33 Per splice welded head Add 210 FLUSH BOLTS Anchors in head required for fire rating Standard ANSI 115.4 H2 Add 40 DUTCH DOOR FRAME N/C Reversible (strike plate included) H5 Add 40 Reinforce Only H1 Add 19 FOUR (4") INCH FACE HEADS (4-3/4" - 14") JAMB DEPTH HINGE PREPARATIONS Available for 1 3/8" or 1 3/4" doors 4 1/2" standard or heavyweight Standard Single including 4'0"Add 35 1 1/2 pair up to and including 7'6" Standard Pairs over 4'0" Add 49 2 pair over 7'6" to 10'0" Standard 5" standard or heavyweight Add Each 4 GALVANNEAL (A60) FRAME ADDS Full surface mounted continuous hinge reinforcement Add 56

Price per frame piece Add 12 High frequency reinforcement strap support O Price per 3-Sided frame Add 36 Per hinge Add 16 Double egress Add 48 HOLDERS GALVANIZED (G-90) Overhead concealed Add 123 Price per frame piece Add 20 Overhead stop & holder surface mounted 14 ga Add 19 Price per 3 sided frame Add 60 Double egress Add 80 PIVOTS FIRE FRAME LABELS Top & bottom set single acting Per frame Add 160 Warnock Hersey - Spedify on order Per jamb Add 68 Embossment; no hourly or 1-1/2 hour ratingStandard Per head Add 92 Metal label with hourly rating on hinge jamb Add 17 Intermediate pivot single acting Each Add 56 Underwriters Laboratories PANIC EXIT REINFORCING Prices are less closer (CL) Rim Type E8 Add 13 LESS Rim vertical rod surface mounted strike E5 Add 19 CL Vertical rod mortise strike in head - Each G20 Add 47 Single Frame Add 17 Double frame Add 34 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock srike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" doo E4 Standard Electric Strike frame E9 Add 80 (Includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 WELDED ASSEMBLIES (3 SIDED FRAMED) Seam Weld Die Miter (KD) SW Add 66 Full Weld Die Miter (KD) FW Add 116 8 M-12 SMO Frames Frame Prices May, 2018

3 6-1/8 8 10 12 GENERAL INFORMATION CURRIES M series frames are available double rabbet (equal WIDTH HEIGHT 5-3/4 THRU THRU THRU THRU THRU or unequal) single rabbet, cased opening, nailer frame, or 6 7-7/8 9-7/8 11-7/8 14 double egress profile. Prices reflect hardware preparations for 1 6'8" 449 460 477 507 549 591 3/4" or 1 3/8" doors. Refer to CURRIES Architectural Technical Data Manual for standard details and limitations. 464 486 516 557 600 1'6" 7' 452 7'2" 465 476 491 520 563 605 THRU All equal face profile corners are sw miter only. 4" face heads 8' 493 504 524 550 583 627 3'0" and 2" face jambs are SMO. Double egress and all other 9' 501 513 534 563 597 640 concern will be saw butt end. 10' 512 524 547 572 608 650 6'8" 458 469 484 515 555 596 Miter and notch charges are included with these list prices on this page. SINGLES 3' + 7' 461 473 493 524 563 605 7'2" 474 485 498 528 569 610 THRU Note: 5-3/4" jamb depth frames have 1/2" minimum back bend. 8' 502 513 531 558 589 632 7/16" N.A. 4'0" 9' 510 522 541 571 603 645 10' 521 533 554 580 614 655 2" face unequal rabbet profile frames are standard. Double rabbet 1", 1 1/4", 1 1/2" and 1 3/4" face frames re priced the 6'8" 498 509 529 566 619 672 same as 2" face at no extra charge. 4' + 7' 502 513 535 576 625 678 7'2" 512 521 539 580 631 684 THRU Jamb depth ranges are listed above each column. 1/8" 8' 550 561 587 620 663 718 increment jamb depths (all ranges 3" thru 14") are available at 6'0" 9' 558 569 597 634 677 730 no extra charge. 10' 568 581 609 642 687 740 6'8" 514 525 543 581 630 682 6' + 7' 518 529 549 591 636 688 7'2' 528 537 553 595 642 694 THRU 8' 566 577 601 635 674 728 8'0" DOUBLES 9' 574 585 611 649 688 740 10' 584 597 623 657 698 750 6'8" 536 548 566 606 650 695 ANCHORS - foot clips are welded in place. 8' + 7' 540 552 572 616 656 701 7'2' 550 560 576 620 662 707 Standard loose jamb anchors are included in these prices; THRU 8' 588 600 624 660 694 741 3 per jamb up to 7'6" and 4 per jamb over 7'6". 10'0" 9' 596 608 634 674 708 753 Complete anchor information is listed in the Engineered Frame Section. 10' 606 620 646 682 718 763 FRAME COMPONENT PART PRICES (NO ANCHORS) Welding charge only per anchor Add 2 6'8" 152 155 161 173 187 202 (Add for appropriate anchor) 7' 153 157 167 177 192 208 7'2" 161 165 170 179 195 210 EXTRAS 8' 168 171 177 187 197 213 BUNDLING AND TAGGING FRAMES 9' 172 176 182 193 204 220 Frame Order Code 3F, 3FH,

STRIKE JAMBS 10' 178 181 189 198 210 225 BL, and 4F component bundling or 6'8" 162 166 170 180 196 211 or welded frames Add 4 7' 164 168 173 185 199 214 Visual ID Add 4 7'2" 169 172 175 187 202 217 8' 186 190 197 205 216 232 CASED OPENING FRAMES (4 1/2" - 14") 9' 190 194 202 212 223 238 Per frame Add 15 HINGE JAMBS 10' 195 200 208 216 228 243 Per piece Add 5 1'6" THRU 3'0" 123 127 134 142 154 166 Cased opening price includes standard mortise hardware preparations, 3'+ THRU 4'0" 132 136 141 150 160 171 hinges and strikes or blank. 4'+ THRU 6'0" 162 165 177 194 215 238

HEADS 6'+ THRU 8'0" 178 181 191 209 226 248 COMMUNICATING FRAME (4 7/8" - 14") 8'+ THRU 10'0" 200 204 214 234 246 261 Available for 1 3/8" or 1 3/4" doors N/C 9 M-12 SMO Frames Frame Prices May, 2018

DOUBLE EGRESS (4 34" - 14") HARDWARE PREPARATIONS Available for 1-3/4" doors. See page 17 of Engineered Frames CLOSER PREPARATIONS Concealed closer Add 184 DUTCH DOOR FRAME N/C Regular arm E10 Add 19 Parallel arm E11 Add 19 FOUR (4") INCH FACE HEADS (4 3/4" - 14") JAMB DEPTH Half sleeve E18 Add 26 Available for 1 3/8" or 1 3/4" doors Full sleeve E17 Add 33 Single including 4'0" Add 35 FLUSH BOLTS Pairs over 4'0" Add 49 Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 GALVANNEAL (A60) FRAME ADDS Reinforce only H1 Add 19 Price per frame piece Add 12 HINGE PREPARATIONS Price per 3 Sided frameAdd 36 4 1/2" standard or heavyweight Standard 1 1/2 pair up to and including 7'6" Standard GALVANIZED (G-90) 2 pair over 7'6" to 10'0" Standard Price per frame piece Add 20 5" standard or heavyweight Add Each 4 Price per 3 Sided frameAdd 60 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Add FIRE FRAME LABELS Per hinge 16 15 Warnock Hersey - Specify on order HOLDERS Embossment; no hourly or 1-1/2 hour rating Standard Overhead concealed Add 123 Metal label with hourly rating on hinge jamb Add 17 Overhead stop and holder surface mounted 14 ga Add 19 Underwirters Laboratories PIVOTS Prices are less closer (CL) Top and bottom set single actingPer frame Add 160 LESS Per jamb Add 68 CL Per head Add 92 Single frame Add 17 Intermediate pivot single acting Each Add 56 Double frame Add 34 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head-Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 10 M-16 KD Borrowed Lites Frame Prices May, 2018

BORROWED LITE K.D. (KNOCKED DOWN) M SERIES FOR NEW CONSTRUCTION - NOTE: Installation is recommended as the wall is being built. Masonry M-profile 16 gauge, loose or welded in anchors, 1", 1 1/4", 1 1/2", 1 3/4", 2" face. G-profile 16 gauge 2" face only. Add $17.00 for U.L. Label. M profile 2" face vertical members are available with 4" face horizontal members. Use 4" face head add. NOTE: 4" face members should only be used when frame corners are welded. NOTE: Standard 5/8" x 5/8" glass stop is cut to length, punched, dimpled and shipped loose. Glass stop is punched 2" in from each end and 12" on center. Price glass stop at $2.86 list per foot. Self drilling #8 TEK screws for glass stop are included. Corner screws are furnished upon request at no charge.

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 WIDTH X HEIGHT CR RK CR RK CR RK CR RK CR RK 1'6" min - 3'0" x 3'0" 172 220 193 241 219 267 253 301 289 337 1'6" min - 3'0" x 4'0" 191 239 215 263 244 292 280 328 320 368 1'6" min - 3'0" x 5'0" 210 258 236 284 269 317 309 357 353 401 1'6" min - 3'0" x 6'0" 233 281 262 310 298 346 341 389 390 438 3'1" - 4'0" x 3'0" 189 237 208 256 236 284 263 311 297 345 3'1" - 4'0" x 4'0" 208 256 229 277 261 309 291 339 329 377 3'1" - 4'0" x 5'0" 227 275 251 299 286 334 319 367 361 409 3'1" - 4'0" x 6'0" 250 298 277 325 315 363 352 400 398 446 4'1" - 6'0" x 3'0" 244 292 276 324 321 369 373 421 432 480 4'1" - 6'0" x 4'0" 264 312 298 346 347 395 400 448 464 512 4'1" - 6'0" x 5'0" 283 331 319 367 371 419 429 477 496 544 4'1" - 6'0" x 6'0" 305 353 346 394 400 448 462 510 533 581

BORROWED LITE K.D. (KNOCKED DOWN) MK SERIES FOR NEW CONSTRUCTION - NOTE: Installation is recommended as the wall is being built. Masonry MK-profile 16 gauge, loose or welded in anchors, 2" face. NOTE: Standard 5/8" x 5/8" glass stop is cut to length, punched, dimpled and shipped loose. Glass stop is punched 2" in from each end and 12" on center. Price glass stop at $2.86 list per foot. Self drilling #8 TEK screws for glass stop are included. Corner screws are furnished upon request at no charge.

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 WIDTH X HEIGHT CR RK CR RK CR RK CR RK CR RK 1'6" min - 3'0" x 3'0" 189 237 210 258 236 284 270 318 305 353 1'6" min - 3'0" x 4'0" 208 256 232 280 261 309 297 345 337 385 1'6" min - 3'0" x 5'0" 227 275 253 301 286 334 325 373 370 418 1'6" min - 3'0" x 6'0" 250 298 280 328 315 363 358 406 407 455 3'1" - 4'0" x 3'0" 206 254 225 273 253 301 280 328 314 362 3'1" - 4'0" x 4'0" 225 273 247 295 278 326 308 356 345 393 3'1" - 4'0" x 5'0" 244 292 268 316 303 351 336 384 378 426 3'1" - 4'0" x 6'0" 267 315 294 342 332 380 369 417 415 463 4'1" - 6'0" x 3'0" 261 309 293 341 338 386 390 438 449 497 4'1" - 6'0" x 4'0" 281 329 315 363 364 412 417 465 481 529 4'1" - 6'0" x 5'0" 300 348 336 384 388 436 446 494 513 561 4'1" - 6'0" x 6'0" 322 370 363 411 417 465 478 526 550 598 11 M-14 KD Borrowed Lites Frame Prices

May, 2018 BORROWED LITE K.D. (KNOCKED DOWN) M SERIES FOR NEW CONSTRUCTION - NOTE: Installation is recommended as the wall is being built. Masonry M-profile 16 gauge, loose or welded in anchors, 1", 1 1/4", 1 1/2", 1 3/4", 2" face. G-profile 16 gauge 2" face only. Add $17.00 for U.L. Label. M profile 2" face vertical members are available with 4" face horizontal members. Use 4" face head add. NOTE: 4" face members should only be used when frame corners are welded. NOTE: Standard 5/8" x 5/8" glass stop is cut to length, punched, dimpled and shipped loose. Glass stop is punched 2" in from each end and 12" on center. Price glass stop at $2.86 list per foot. Self drilling #8 TEK screws for glass stop are included. Corner screws are furnished upon request at no charge.

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 WIDTH X HEIGHT CR RK CR RK CR RK CR RK CR RK 1'6" min - 3'0" x 3'0" 207 255 219 267 264 312 290 338 321 369 1'6" min - 3'0" x 4'0" 233 281 244 292 293 341 323 371 359 407 1'6" min - 3'0" x 5'0" 257 305 271 319 324 372 356 404 397 445 1'6" min - 3'0" x 6'0" 287 335 302 350 359 407 394 442 439 487 3'1" - 4'0" x 3'0" 222 270 229 277 278 326 313 361 336 384 3'1" - 4'0" x 4'0" 248 296 255 303 308 356 347 395 374 422 3'1" - 4'0" x 5'0" 272 320 282 330 339 387 379 427 412 460 3'1" - 4'0" x 6'0" 302 350 313 361 374 422 417 465 454 502 4'1" - 6'0" x 3'0" 294 342 313 361 387 435 437 485 486 534 4'1" - 6'0" x 4'0" 320 368 338 386 417 465 471 519 524 572 4'1" - 6'0" x 5'0" 344 392 365 413 448 496 504 552 562 610 4'1" - 6'0" x 6'0" 374 422 396 444 483 531 542 590 604 652

BORROWED LITE K.D. (KNOCKED DOWN) MK SERIES FOR NEW CONSTRUCTION - NOTE: Installation is recommended as the wall is being built. Masonry MK-profile 16 gauge, loose or welded in anchors, 2" face. NOTE: Standard 5/8" x 5/8" glass stop is cut to length, punched, dimpled and shipped loose. Glass stop is punched 2" in from each end and 12" on center. Price glass stop at $2.86 list per foot. Self drilling #8 TEK screws for glass stop are included. Corner screws are furnished upon request at no charge.

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 WIDTH X HEIGHT CR RK CR RK CR RK CR RK CR RK 1'6" min - 3'0" x 3'0" 224 272 236 284 281 329 306 354 338 386 1'6" min - 3'0" x 4'0" 250 298 261 309 310 358 340 388 376 424 1'6" min - 3'0" x 5'0" 274 322 288 336 341 389 373 421 414 462 1'6" min - 3'0" x 6'0" 304 352 319 367 376 424 411 459 456 504 3'1" - 4'0" x 3'0" 239 287 247 295 296 344 330 378 353 401 3'1" - 4'0" x 4'0" 265 313 272 320 325 373 363 411 391 439 3'1" - 4'0" x 5'0" 289 337 299 347 356 404 396 444 429 477 3'1" - 4'0" x 6'0" 319 367 330 378 391 439 434 482 471 519 4'1" - 6'0" x 3'0" 311 359 330 378 404 452 454 502 503 551 4'1" - 6'0" x 4'0" 337 385 355 403 434 482 488 536 541 589 4'1" - 6'0" x 5'0" 362 410 382 430 465 513 521 569 579 627 4'1" - 6'0" x 6'0" 391 439 413 461 500 548 559 607 621 669 12 C-18 KD Frames Frame Prices May, 2018

6-1/8 8 GENERAL INFORMATION 3 WIDTH HEIGHT THRU THRU CURRIES C series frames are available double rabbet (equal or unequal) THRU 6 7-7/8 9-7/8 single rabbet, cased opening. Prices reflect hardware preparations for 1 3/4" or 1 3/8" doors. Refer to CURRIES Architectural Technical Data 6'8" 191 212 248 1'6" Manual for standard details and limitations. 7' 197 218 254 THRU 7'2" 203 222 259 2" face unequal rabbet profile frames are standard. Double rabbet 1 1/2" 3'0" 8' 223 245 273 and 1 3/4" face frames re priced the same as 2" face at no extra charge. 6'8" 198 217 255 3' + Jamb depth ranges are listed above each column. 1/8" increment jamb SINGLES 7' 204 223 261 THRU depths (all ranges 3" thru 9 7/8") are available at no extra charge. 7'2" 210 227 266 4'0" 8' 230 250 280 ANCHORS 6'8" 230 252 291 Drywall C Series frames have compression bars welded in place at the 4' + 7' 238 262 299 top of each jamb and a punched base anchor hole in the frame face at THRU 7'2" 246 266 305 the bottom. 6'0" 8' 266 290 317 Optional strap type base anchors are available welded in at no charge. 6'8" 246 266 304 6' + The optional strap type base anchor is required for narrow face 1 1/2" and DOUBLES 7' 254 276 312 1 3/4" face frames. THRU 7'2' 262 280 318 8'0" 8' 282 304 330 FRAME COMPONENT PART PRICES 6'8" 73 80 95 7' 75 81 97 7'2" 77 83 99 JAMBS STRIKE 8' 87 94 107 6'8" 82 89 103 7' 86 94 107 7'2" 90 96 110 EXTRAS HINGE JAMBS 8' 100 108 116 BUNDLING AND TAGGING FRAMES 1'6" THRU 3'0" 36 43 50 Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F 3'+ THRU 4'0" 43 48 57 component bundling or 4'+ THRU 6'0" 66 74 85 or welded frames Add 4 HEADS 6'+ THRU 8'0" 82 88 98 Visual ID tags Add 4

CASED OPENING FRAMES (4 1/2" - 9 7/8") Per frame Add 12 Per piece Add 4 Cased opening price includes standard mortise hardware preparations, hinges and strikes or blank.

COMMUNICATING FRAME (4 7/8" - 9 7/8") Available for 1 3/8" or 1 3/4" doors N/C 13 C-18 KD Frames Frame Prices May, 2018

EXTRAS EXTRAS NAILER frame (3 3/4” - 13”) N Profile Add 57 THERMAL BREAK FRAMES - NOT AVAILABLE NOTE: Refer To Tech Page for maximum ratings and HARDWARE PREPARATIONS CURRISEAL FRAME (4 1/8” - 14”) CLOSER PREPARATIONS Gasketed frame price includes gasket. Concealed closer Add 184 Available for 1 3/4” door Regular arm E10 Add 19 Singles up to (including) 3072 Add 122 Parallel arm E11 Add 19 Singles up to (including) 4080 Add 128 Half sleeve E18 Add 26 Pairs up to (including) 6072 Add 128 Full sleeve E17 Add 33 Pairs up to (including) 8072 Add 131 Additional gasket prices and stock numbers are listed in the Engineered FLUSH BOLTS Frame Section. Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 DOUBLE EGRESS-NOT AVAILABLE IN KD. PRICE AS CCW Reinforce only H1 Add 19 WELDED CONSTRUCTION ONLY. HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard DUTCH DOOR FRAME N/C 1 1/2 Pair up to and including 7'6" Standard 2 pair over 7'6" to 10'0" Standard FOUR (4") INCH FACE HEADS (4 3/4" - 14") JAMB DEPTH 5" standard or heavyweightAdd Each 4 Available for 1 3/8" or 1 3/4" doors Full Surface mounted continuous hinge reinforcement Add 56 Single including 4'0" Add 35 High frequency reinforcement strap support Pairs over 4'0" Add 49 Per hinge Add 16 HOLDERS GALVANNEAL (A60) FRAME ADDS Overhead Concealed Add 123 Price per frame piece Add 12 Overhead stop and holder surface mounted 14 ga. Add 19 Price per 3 Sided frame Add 36 PIVOTS GALVANIZED (G-90) Top and bottom set single acting Per Frame Add 160 Price per frame piece Add 20 Per Jamb Add 68 Price per 3 Sided frame Add 60 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" E4 Standard Electric strike frame E9 Add 80 SURFACE BOLTS Reinforcement only Add 19 14 C-16 KD Frames Frame Prices May, 2018

GENERAL INFORMATION 3 6-1/8 8 10 12 CURRIES C series frames are available double rabbet (equal or WIDTH HEIGHT THRU THRU THRU THRU THRU unequal) single rabbet, cased opening. Prices reflect hardware 6 7-7/8 9-7/8 11-7/8 14 preparations for 1 3/4" or 1 3/8" doors. Refer to CURRIES Architectural Technical Data Manual for standard details and limitations. 6'8" 200 215 271 311 348 7' 204 228 287 325 363 Drywall frames are installed after the wall has been constructed 1'6" 7'2" 215 234 293 335 370 THRU 2" face unequal rabbet profile frames are standard. Double rabbet 1 1/2" 8' 240 260 322 357 391 3'0" and 1 3/4" face frames are priced the same as 2" face at no extra 9' 256 284 352 387 423 charge. 10' 271 306 377 417 454 6'8" 203 220 274 315 356 Jamb depth ranges are listed above each column 1/8" increment jamb SINGLES 7' depths (all ranges 3" thru 14") are available at no extra charge. 3' + 207 233 290 329 371 7'2" 218 239 296 339 378 THRU ANCHORS 8' 243 265 325 361 399 4'0" DRYWALL C Series frames have compression bars welded in place at 9' 259 289 355 391 431 the top of each jamb and a punched base anchor in the frame face at the 10' 274 311 380 421 462 bottom. 6'8" 238 256 317 358 394 7' 242 268 333 372 408 Optional strap type base anchors are available welded in at no charge. 4' + The optional strap type base anchor is required for narrow face 1 1/2" 7'2" 256 276 341 386 420 THRU and 1 3/4" face frames. 8' 284 314 383 420 452 6'0" 9' 300 346 425 464 500 10' 318 378 461 508 546 6'8" 249 267 330 372 409 7' 6' + 253 279 346 386 423 7'2' 267 287 354 400 435 THRU 8' 295 325 396 434 467 8'0" DOUBLES 9' 311 357 438 478 515 10' 329 389 474 522 561 6'8" 280 302 375 417 458 7' EXTRAS 8' + 284 314 391 431 472 7'2' 298 322 399 445 484 BUNDLING AND TAGGING FRAMES THRU 8' 326 360 441 479 516 Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, 4F 10'0" 9' 342 392 483 523 564 and 4F component bundling or 10' 360 424 519 567 610 or welded frames Add 4 FRAME COMPONENT PART PRICES (NO ANCHORS) Visual ID tags Add 4 6'8" 76 82 103 118 133 7' 78 89 111 125 141 CASED OPENING FRAMES (4 1/2" - 14") 7'2" 82 91 113 128 142 Per frame Add 12 8' 93 98 121 133 147 Per piece Add 4 9' 101 106 130 141 155 Cased opening price includes standard mortise hardware preparations,

STRIKE JAMBS 10' 107 112 137 149 163 hinges and strikes or blank. 6'8" 82 89 111 127 142 7' 84 95 119 134 149 COMMUNICATING FRAME (4 7/8" - 14") 7'2" 91 99 123 141 155 Available for 1 3/8" or 1 3/4" doors N/C 8' 105 118 144 158 171 9' 113 134 165 180 195 HINGE JAMBS 10' 122 150 183 202 218 1'6" THRU 3'0" 42 44 57 66 73 3'+ THRU 4'0" 45 49 60 70 81 4'+ THRU 6'0" 74 78 95 104 110

HEADS 6'+ THRU 8'0" 85 89 108 118 125 8'+ THRU 10'0" 116 124 153 163 174 15 C-16 KD Frames Frame Prices

May, 2018

EXTRAS EXTRAS NAILER frame (3 3/4” - 13”) N Profile Add 57 THERMAL BREAK FRAMES - NOT AVAILABLE NOTE: Refer To Tech Page for maximum ratings and sizes HARDWARE PREPARATIONS CURRISEAL FRAME (4 1/8” - 14”) CLOSER PREPARATIONS Gasketed frame price includes gasket. Concealed closer Add 184 Available for 1 3/4” door Regular arm E10 Add 19 Singles up to (including) 3072 Add 122 Parallel arm E11 Add 19 Singles up to (including) 4080 Add 128 Half sleeve E18 Add 26 Pairs up to (including) 6072 Add 128 Full sleeve E17 Add 33 Pairs up to (including) 8072 Add 131 Additional gasket prices and stock numbers are listed in the Engineered FLUSH BOLTS Frame Section. Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 DOUBLE EGRESS-NOT AVAILABLE IN KD. PRICE AS CCW Reinforce only H1 Add 19 WELDED CONSTRUCTION ONLY. HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard DUTCH DOOR FRAME N/C 1 1/2 Pair up to and including 7'6" Standard 2 pair over 7'6" to 10'0" Standard FOUR (4") INCH FACE HEADS (4 3/4" - 14") JAMB 5" standard or heavyweightAdd Each 4 Available for 1 3/8" or 1 3/4" doors Full Surface mounted continuous hinge Add 56 Single including 4'0" Add 35 High frequency reinforcement strap support Pairs over 4'0" Add 49 Per hinge Add 16 HOLDERS GALVANNEAL (A60) FRAME ADDS Overhead Concealed Add 123 Price per frame piece Add 12 Overhead stop and holder surface mounted 14 Add 19 Price per 3 Sided frame Add 36 PIVOTS GALVANIZED (G-90) Top and bottom set single acting Per Frame Add 160 Price per frame piece Add 20 Per Jamb Add 68 Price per 3 Sided frame Add 60 Per head Add 92 Intermediate pivot single acting Each Add 56 FIRE FRAME LABLES PANIC EXIT REINFORCING Warnock Hersey - Specify on order Rim type E8 Add 13 Embossment; no hourly or 1 1/2 hour rating Standard Rim vertical rod surface mounted strike E5 Add 19 Metal label with hourly rating on hinge jamb Add 17 Vertical rod mortise strike in head - Each G20 Add 47 Underwriters Laboratories STRIKES Prices are less closer (CL) 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard LESS 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" E2 Standard CL 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" E3 Standard Single Frame Add 17 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" E4 Standard Double Frame Add 34 Electric strike frame E9 Add 80 (includes cover box with knockout)

SURFACE BOLTS Reinforcement only Add 19

Swift Pac quantity frame pricing is available 16 C-16 KD Sidelight Frames Frame Prices May, 2018

6-1/8 8 GENERAL INFORMATION 4 1/2 WIDTH HEIGHT THRU THRU CURRIES C series frames are available double rabbet (equal or THRU 6 7-7/8 8 3/4" unequal) Prices reflect hardware preparations for 1 3/4" or 1 3/8" doors. Refer to CURRIES Architectural Technical Data Manual for 6'8" 203 220 274 standard details and limitations. 3' + 7' 207 233 290 THRU 7'2' 218 239 296 CURRIES Drywall KD Sidelight includes-mullion stirrup, mullion 4'0" and sill notching, and reverse welded foot clip on mullion. 8' 243 265 325 6'8" 238 256 317 4' + Drywall frames are installed after the wall has been constructed 7' 242 268 333 THRU 7'2" 256 276 341 6'0" 2" face unequal rabbet profile frames are standard. Double rabbet 8' 284 314 383 1 1/2" and 1 3/4" face frames re priced the same as 2" face at no 6'8" 249 267 330 extra charge. 6' + 7' 253 279 346 THRU Jamb depth ranges are listed above each column. 1/8" increment 7'2" 267 287 354 8'0" jamb depths (all ranges 4 1/2" thru 8 3/4") are available at no 8' 295 325 396 extra charge.

VERTICAL MULLION PRICING 2" FACE (INCLUDES TOP ANCHORS BUTT END NOTCH, STIRRUP ANCHOR, FOOTCLIP, AND Drywall C Series frames have compression bars welded in place E-1 STRIKE. PRICE WILL NEED TO BE ADJUSTED FOR at the top of each jamb and a punched base anchor hole in the HINGE PREPS). frame face at the bottom. 6'8" 205 225 238 Optional strap type base anchors are available welded in at no 7'0" 214 235 249 charge. The optional strap type base anchor is required for narrow 8'0" 241 264 280 face 1 1/2" and 1 3/4" face frames.

SILL PRICING (INCLUDES 2 BUTT END NOTCHES)

2" Face - 1' Long 35 36 39 4" Face - 1' Long 37 38 42 6" Face - 1' Long 39 41 45

2" Face - 2' Long 50 52 58 4" Face - 2' Long 54 56 63 EXTRAS 6" Face - 2' Long 58 61 69 BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, 4F 2" Face - 3' Long 65 68 77 and 4F component bundling or 4" Face - 3' Long 71 74 85 or welded frames Add 4 6" Face - 3' Long 78 82 94 Visual ID tags Add 4

2" Face - 4' Long 80 84 95 4" Face - 4' Long 88 92 106 6" Face - 4' Long 97 102 119

GLASS STOP - 5/8" X 5/8" CCW 93 Included in Price 17 C-16 KD Sidelight Frames Frame Prices

May, 2018

EXTRAS GALVANNEAL (A60) FRAME ADDS Price per frame piece Add 12

HARDWARE PREPARATIONS CLOSER PREPARATIONS Concealed closer Add 184 Regular arm E10 Add 19 Parallel arm E11 Add 19 Half sleeve E18 Add 26 Full sleeve E17 Add 33 FLUSH BOLTS Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 Reinforce only H1 Add 19 HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard 1 1/2 Pair up to and including 7'6" Standard 2 pair over 7'6" to 10'0" Standard 5" standard or heavyweightAdd Each 4 Full Surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16 HOLDERS Overhead Concealed Add 123 Overhead stop and holder surface mounted 14 ga. Add 19 PIVOTS Top and bottom set single acting Per Frame Add 160 Per Jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 18 C-14 KD Frames Frame Prices

May, 2018

GENERAL INFORMATION 3 6-1/8 8 10 12 CURRIES C series frames are available double rabbet (equal or WIDTH HEIGHT THRU THRU 7- THRU THRU THRU unequal) single rabbet (2" face x 2 5/8" face), or cased opening. 6 7/8 9-7/8 11-7/8 14 Prices reflect hardware preparations for 1 3/4" or 1 3/8" doors. 6'8" 238 254 322 354 401 Refer to CURRIES Architectural Technical Data Manual for standard details and limitations. 251 269 337 372 416 1'6" 7' 7'2" 256 276 344 379 428 THRU Drywall frames are installed after the wall has ben constructed. 8' 284 308 383 408 454 3'0" 9' 303 338 413 439 489 2" face unequal rabbet profile frames are standard. 14 ga narrow 10' 322 369 446 476 524 face is not available K.D. 6'8" 242 262 325 363 409 SINGLES 3' + 7' 255 277 340 381 424 Jamb depth ranges are listed above each column 1/8" increment 7'2" 260 284 347 388 436 THRU jamb depths (all ranges 3" thru 14") are available at no extra 8' 288 316 386 417 462 4'0" charge. 9' 307 346 416 448 497 10' 326 377 449 485 532 ANCHORS 6'8" 281 305 379 410 453 DRYWALL C Series frames have compression bars welded in place at the top of each jamb and a punched base anchor in the 4' + 7' 301 317 397 430 469 7'2" 305 327 403 440 487 frame face at the bottom. THRU 8' 335 373 459 484 523 6'0" 9' 357 413 503 532 575 Optional strap type base anchors are available welded in at no 10' 375 449 549 584 625 charge. The optional strap type base anchor is required for narrow 6'8" 294 318 396 426 470 face 1 1/2" and 1 3/4" face frames. 6' + 7' 314 330 414 446 486 7'2' 318 340 420 456 504 THRU 8' 348 386 476 500 540 8'0" DOUBLES 9' 370 426 520 548 592 10' 388 462 566 600 642 6'8" 332 359 447 480 528 EXTRAS 8' + 7' 352 371 465 500 544 7'2' 356 381 471 510 562 BUNDLING AND TAGGING FRAMES THRU 8' 386 427 527 554 598 Frame Order Code 3F, 3FH, 3FV, 10'0" 9' 408 467 571 602 650 BL, and 4F component bundling or 10' 426 503 617 654 700 or welded frames Add 4 FRAME COMPONENT PART PRICES Visual ID Add 4 6'8" 91 97 123 136 153 7' 94 106 129 144 160 CASED OPENING FRAMES (4 1/2" - 14") 7'2" 97 108 133 146 163 Per frame Add 12 8' 110 117 144 153 171 Per piece head Add 4 9' 118 127 152 160 180 Cased opening price includes standard mortise hardware preparations,

STRIKE JAMBS 10' 128 140 162 171 190 hinges and strikes or blank. 6'8" 97 106 133 145 163 7' 107 112 142 155 171 COMMUNICATING FRAME (4 7/8" - 14") 7'2" 109 117 145 160 180 Available for 1 3/8" or 1 3/4" doors N/C 8' 124 140 173 182 198 9' 135 160 195 206 224 HINGE JAMBS 10' 144 178 218 232 249 1'6" THRU 3'0" 50 51 66 73 85 3'+ THRU 4'0" 54 59 69 82 93 4'+ THRU 6'0" 87 93 113 120 127

HEADS 6'+ THRU 8'0" 100 106 130 136 144 8'+ THRU 10'0" 138 147 181 190 202 19 C-14 KD Frames Frame Prices

May, 2018

EXTRAS EXTRAS NAILER frame (3 3/4” - 13”) N Profile Add 57 THERMAL BREAK FRAMES - NOT AVAILABLE NOTE: Refer To Tech Page for maximum ratings and sizes HARDWARE PREPARATIONS CURRISEAL FRAME (4 1/8” - 14”) CLOSER PREPARATIONS Gasketed frame price includes gasket. Concealed closer Add 184 Available for 1 3/4” door Regular arm E10 Add 19 Singles up to (including) 3072 Add 122 Parallel arm E11 Add 19 Singles up to (including) 4080 Add 128 Half sleeve E18 Add 26 Pairs up to (including) 6072 Add 128 Full sleeve E17 Add 33 Pairs up to (including) 8072 Add 131 Additional gasket prices and stock numbers are listed in the Engineered FLUSH BOLTS Frame Section. Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 DOUBLE EGRESS-NOT AVAILABLE IN KD. PRICE AS CCW Reinforce only H1 Add 19 WELDED CONSTRUCTION ONLY. HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard DUTCH DOOR FRAME N/C 1 1/2 Pair up to and including 7'6" Standard 2 pair over 7'6" to 10'0" Standard FOUR (4") INCH FACE HEADS (4 3/4" - 14") JAMB DEPTH 5" standard or heavyweightAdd Each 4 Available for 1 3/8" or 1 3/4" doors Full Surface mounted continuous hinge reinforcement Add 56 Single including 4'0" Add 35 High frequency reinforcement strap support Pairs over 4'0" Add 49 Per hinge Add 16 HOLDERS GALVANNEAL (A60) FRAME ADDS Overhead Concealed Add 123 Price per frame piece Add 12 Overhead stop and holder surface mounted 14 ga. Add 19 Price per 3 Sided frame Add 36 PIVOTS GALVANIZED (G-90) Top and bottom set single acting Per Frame Add 153 160 Price per frame piece Add 20 Per Jamb Add 68 Price per 3 Sided frame Add 60 Per head Add 92 Intermediate pivot single actingEach Add 56 FIRE FRAME LABLES PANIC EXIT REINFORCING Warnock Hersey - Specify on order Rim type E8 Add 13 Embossment; no hourly or 1 1/2 hour ratingStandard Rim vertical rod surface mounted strike E5 Add 19 Metal label with hourly rating on hinge jamb Add 17 Vertical rod mortise strike in head - Each G20 Add 47 Underwriters Laboratories STRIKES Prices are less closer (CL) 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard LESS 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard CL 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard Single Frame Add 17 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Double Frame Add 34 Electric strike frame E9 Add 80 (includes cover box with knockout)

SURFACE BOLTS Reinforcement only Add 19 20 C-16 KD Borrowed Lites Frame Prices May, 2018

BORROWED LITE K.D. (KNOCKED DOWN) C SERIES FOR NEW CONSTRUCTION - NOTE: Installation is after the wall is up, rough opening size required is 2-1/2" larger than actual glass opening width and height 4" face members are not available Drywall C-profile 16 gauge, compression anchors top and bottom horizontal members, 1-1/2", 1-3/4", 2" face. CG profile is available 2" face only Add $17.00 list for U.L. Label NOTE: Standard 5/8" x 5/8" glass stop is cut to length, punched, dimpled and shipped loose. Glass stop is punched 2" in from each end and 12" on center. Price glass stop at $2.86 list per foot. Self drilling #8 TEK screws for glass stop are included. Corner screws are furnished upon request at no charge.

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 WIDTH X HEIGHT CR RK CR RK CR RK CR RK CR RK 1'6" min - 3'0" x 3'0" 186 234 200 248 248 296 270 318 298 346 1'6" min - 3'0" x 4'0" 192 240 211 259 254 302 278 326 313 361 1'6" min - 3'0" x 5'0" 248 296 266 314 320 368 345 393 372 420 1'6" min - 3'0" x 6'0" 248 296 266 314 320 368 345 393 372 420 3'1" - 4'0" x 3'0" 209 257 225 273 280 328 305 353 338 386 3'1" - 4'0" x 4'0" 216 264 236 284 286 334 314 362 353 401 3'1" - 4'0" x 5'0" 271 319 291 339 352 400 381 429 412 460 3'1" - 4'0" x 6'0" 271 319 291 339 352 400 381 429 412 460 4'1" - 6'0" x 3'0" 255 303 277 325 344 392 376 424 418 466 4'1" - 6'0" x 4'0" 261 309 288 336 351 399 385 433 433 481 4'1" - 6'0" x 5'0" 317 365 343 391 417 465 452 500 492 540 4'1" - 6'0" x 6'0" 317 365 343 391 417 465 452 500 492 540

BORROWED LITE K.D. (KNOCKED DOWN) CK SERIES FOR NEW CONSTRUCTION - NOTE: Installation is after the wall is up, rough opening size required is larger than actual glass opening width and height. Drywall CK-profile 16 gauge, compression anchors top and bottom horizontal members, 2" face NOTE: Standard 5/8" x 5/8" glass stop is cut to length, punched, dimpled and shipped loose. Glass stop is punched 2" in from each end and 12" on center. Price glass stop at $2.86 list per foot. Self drilling #8 TEK screws for glass stop are included. Corner screws are furnished upon request at no charge.

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 WIDTH X HEIGHT CR RK CR RK CR RK CR RK CR RK 1'6" min - 3'0" x 3'0" 203 251 217 265 265 313 286 334 315 363 1'6" min - 3'0" x 4'0" 209 257 227 275 271 319 295 343 330 378 1'6" min - 3'0" x 5'0" 265 313 283 331 337 385 362 410 389 437 1'6" min - 3'0" x 6'0" 265 313 283 331 337 385 362 410 389 437 3'1" - 4'0" x 3'0" 226 274 242 290 297 345 322 370 355 403 3'1" - 4'0" x 4'0" 233 281 253 301 303 351 331 379 370 418 3'1" - 4'0" x 5'0" 288 336 308 356 369 417 398 446 429 477 3'1" - 4'0" x 6'0" 288 336 308 356 369 417 398 446 429 477 4'1" - 6'0" x 3'0" 272 320 294 342 362 410 393 441 435 483 4'1" - 6'0" x 4'0" 278 326 305 353 368 416 401 449 450 498 4'1" - 6'0" x 5'0" 334 382 360 408 434 482 469 517 509 557 4'1" - 6'0" x 6'0" 334 382 360 408 434 482 469 517 509 557 21 C-14 KD Borrowed Lites Frame Prices May, 2018 BORROWED LITE K.D. (KNOCKED DOWN) C SERIES FOR NEW CONSTRUCTION - NOTE: Installation is after the wall is up, rough opening size required is 2-1/2" larger than actual glass opening width and height. 4" face members are not available. Drywall C-profile 14 gauge, compression anchors top and bottom horizontal members, 2" face only. Add $17.00 list for U.L. Label. NOTE: Standard 5/8" x 5/8" glass stop is cut to length, punched, dimpled and shipped loose. Glass stop is punched 2" in from each end and 12" on center. Price glass stop at $2.86 list per foot. Self drilling #8 TEK screws for glass stop are included. Corner screws are furnished upon request at no charge.

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 WIDTH X HEIGHT CR RK CR RK CR RK CR RK CR RK 1'6" min - 3'0" x 3'0" 218 266 229 277 283 331 301 349 337 385 1'6" min - 3'0" x 4'0" 226 274 247 295 289 337 318 366 354 402 1'6" min - 3'0" x 5'0" 288 336 310 358 372 420 394 442 419 467 1'6" min - 3'0" x 6'0" 288 336 310 358 372 420 394 442 419 467 3'1" - 4'0" x 3'0" 245 293 261 309 321 369 341 389 383 431 3'1" - 4'0" x 4'0" 254 302 278 326 327 375 358 406 400 448 3'1" - 4'0" x 5'0" 316 364 342 390 411 459 434 482 465 513 3'1" - 4'0" x 6'0" 316 364 342 390 411 459 434 482 465 513 4'1" - 6'0" x 3'0" 301 349 323 371 397 445 424 472 474 522 4'1" - 6'0" x 4'0" 309 357 340 388 403 451 441 489 491 539 4'1" - 6'0" x 5'0" 371 419 404 452 486 534 516 564 556 604 4'1" - 6'0" x 6'0" 371 419 404 452 486 534 516 564 556 604

BORROWED LITE K.D. (KNOCKED DOWN) CK SERIES FOR NEW CONSTRUCTION - NOTE: Installation is after the wall is up, rough opening size required is larger than actual glass opening width and height Drywall CK-profile 14 gauge, compression anchors top and bottom horizontal members, 2" face NOTE: Standard 5/8" x 5/8" glass stop is cut to length, punched, dimpled and shipped loose. Glass stop is punched 2" in from each end and 12" on center. Price glass stop at $2.86 list per foot. Self drilling #8 TEK screws are included. Corner screws for glass stop are furnished upon request at no charge.

WIDTH X HEIGHT 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 CR RK CR RK CR RK CR RK CR RK 1'6" min - 3'0" x 3'0" 235 283 247 295 300 348 318 366 354 402 1'6" min - 3'0" x 4'0" 243 291 264 312 306 354 335 383 368 416 1'6" min - 3'0" x 5'0" 305 353 327 375 389 437 411 459 436 484 1'6" min - 3'0" x 6'0" 305 353 327 375 389 437 411 459 436 484 3'1" - 4'0" x 3'0" 262 310 278 326 338 386 358 406 400 448 3'1" - 4'0" x 4'0" 271 319 296 344 344 392 375 423 417 465 3'1" - 4'0" x 5'0" 333 381 359 407 428 476 451 499 483 531 3'1" - 4'0" x 6'0" 333 381 359 407 428 476 451 499 483 531 4'1" - 6'0" x 3'0" 318 366 340 388 414 462 440 488 491 539 4'1" - 6'0" x 4'0" 326 374 357 405 420 468 457 505 508 556 4'1" - 6'0" x 5'0" 388 436 421 469 503 551 533 581 573 621 4'1" - 6'0" x 6'0" 388 436 421 469 503 551 533 581 573 621 22 CM-18 KD Frames Frame Prices

May, 2018

ENERAL INFORMATION 3 6-1/8 8 G WIDTH HEIGHT THRU THRU THRU CURRIES CM series frames are available double rabbet (equal or unequal), 6 7-7/8 9-7/8 single rabbet or cased opening profile. Prices reflect hardware preparations for 1 3/4" or 1 3/8" doors. Refer to CURRIES Architectural Technical Data Manual 6'8" 182 195 226 for standard details and limitations.These frames are intended to be welded 7' 187 203 236 1'6" and installed prior to wall construction. This is a drywall profile frame without 7'2" 194 206 240 THRU the compression anchor system. Wall anchors must be used. 8' 223 238 266 3'0" All hinge jambs are available with Warnock Hersey Label embossment at no charge when specified on the order. 6'8" 185 199 231 SINGLES 7' 190 207 241 2" face unequal rabbet profile frames are standard. Double rabbet 1 1/2" and 1 3'+ 7'2" 197 210 245 3/4" face frames are priced the same as 2" face at no extra charge. THRU 8' 226 242 271 4'0" EXPANDED KD CAPABILITIES Returns can vary 7/16" min. through 1" max (add 15%) Rabbets can vary 5/8" min. and 6" max. for the non door rabbet. 6'8" 231 245 290 Contact factory for bend limitations on any KD profiles with rabbets exceeding 7' 237 251 300 4'+ 6". A 15% add is applicable to frame price for returns and or rabbets. 7'2" 245 253 304 THRU 8' 281 297 342 6'0" Jamb depth ranges are listed above each column 1/8" increment jamb depths (all ranges 3" thru 14") are available at no extra charge.

6'8" 237 255 299

DOUBLES 7' 243 261 309 6'+ 7'2" 251 263 313 THRU 8' 8'0" 287 307 351 ANCHORS - footclips are welded in place. Standard loose jamb anchors are included in these prices. 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor FRAME COMPONENT PART PRICES (NO ANCHORS) information is listed in the Engineered Frame Section. 6'8" 61 67 77 7' 63 72 82 Welding charge only per anchor Add 2 7'2" 66 74 84 (Add for appropriate anchor) 8' 75 82 89 EXTRAS

STRIKE JAMBS BUNDLING AND TAGGING FRAMES 6'8" 69 74 86 Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, 4F 7' 72 77 91 component bundling or welded frames Add 4 7'2" 76 78 93 Visual ID tag Add 4 8' 92 98 110 CASED OPENING FRAMES (4 1/2" - 14") HINGE JAMBS Per frame Add 12 1'6" THRU 3'0" 40 42 51 Per piece Add 4 3'+ THRU 4'0" 43 46 56 Cased opening price includes standard mortise hardware preparations, 4'+ THRU 6'0" 81 85 106 hinges and strikes or blank. HEADS 6'+ THRU 8'0" 87 95 115 COMMUNICATING FRAME (4 7/8" - 14") Available for 1 3/8" or 1 3/4" doors N/C 23 CM-18 KD Frames Frame Prices May, 2018 EXTRAS EXTRAS CURRISEAL FRAME (4 1/8” - 14”) THERMAL BREAK FRAMES - NOT AVAILABLE Gasketed frame price includes Available for 1 3/4” door HARDWARE PREPARATIONS Singles up to (including) 3072 Add 122 CLOSER PREPARATIONS Singles up to (including) 4080 Add 128 Concealed closer Add 184 Pairs up to (including) 6072 Add 128 Regular arm E10 Add 19 Pairs up to (including) 8072 Add 131 Parallel arm E11 Add 19 Additional gasket prices and stock numbers are listed in the Half sleeve E18 Add 26 Engineered Frame Section. Full sleeve E17 Add 33

DOUBLE EGRESS - NOT AVAILABLE IN KD. PRICE FLUSH BOLTS WELDED CONSTRUCTION ONLY Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 DUTCH DOOR FRAME N/C Reinforce Only H1 Add 19

FOUR (4") INCH FACE HEADS (4-3/4" - 14") HINGE PREPARATIONS Available for 1 3/8" or 1 3/4" doors 4 1/2" standard or heavyweight Standard Single including 4'0" Add 35 1 1/2 pair up to and including 7'6" Standard Pairs over 4'0" Add 49 2 pair over 7'6" to 10'0" Standard 5" standard or heavyweight Add Each 4 GALVANNEAL (A60) FRAME ADDS Full surface mounted continuous hinge reinforcement Add 56 Price per frame piece Add 12 High frequency reinforcement strap support Price per 3-Sided frame Add 36 Per hinge Add 16

GALVANIZED (G-90) HOLDERS Price per frame piece Add 20 Overhead concealed Add 123 Price per 3 sided frame Add 60 Overhead stop & holder surface mounted 14 ga Add 19 PIVOTS FIRE FRAME LABELS Top & bottom set single acting Per frame Add 160 Warnock Hersey - Spedify on order Per jamb Add 68 Embossment; no hourly or 1-1/2 hour ratingStandard Per head Add 92 Metal label with hourly rating on hinge jamb Add 17 Intermediate pivot single acting Each Add 56

Underwriters Laboratories PANIC EXIT REINFORCING Prices are less closer (CL) Rim Type E8 Add 13 LESS Rim vertical rod surface mounted strike E5 Add 19 CL Vertical rod mortise strike in head - Each G20 Add 47 Single Frame Add 17 Double frame Add 34 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock srike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric Strike frame E9 Add 80 (Includes cover box with knockout)

SURFACE BOLTS Reinforcement only Add 19 24 CM-16 KD Frames Frame Prices

May, 2018

3 6-1/8 8 10 12 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU CURRIES CM series frames are available double rabbet (equal or 6 7-7/8 9-7/8 11-7/8 14 unequal), single rabbet or cased opening profile. Prices reflect hardware preparations for 1 3/4" or 1 3/8" doors. 6'8" 194 209 246 285 321 7' 198 215 255 293 331 1'6" Refer to CURRIES Architectural Technical Data Manual for standard details 7'2" 208 219 261 298 335 THRU and limitations. These frames are intended to be welded and installed prior 8' 240 253 289 321 357 3'0" to wall construction. This is a drywall profile frame without the compression 9' 248 264 300 332 369 anchor system. Wall anchors must be used. All hinge jambs are available 10' 261 276 311 344 380 with Warnock Hersey Label embossment at no charge when specified on 6'8" 197 214 249 289 329 the order. 2" face unequal rabbet profile frames are standard. Double rabbet SINGLES 7' 1 1/2" and 1 3/4" face frames are priced the same as 2" face at no extra 3' + 201 220 258 297 339 7'2" 211 224 264 302 343 charge. THRU 8' 243 258 292 325 365 4'0" 9' 251 269 303 336 377 EXPANDED KD CAPABILITIES 10' 264 281 314 348 388 Returns can vary 7/16" min. through 1" max (add 15%) 6'8" 247 262 316 360 407 Rabbets can vary 5/8" min. and 6" max. for the non door rabbet. 7' 251 266 326 366 415 Contact factory for bend limitations on any KD profiles with rabbets 4' + exceeding 6". A 15% add is applicable to frame price for returns and or 7'2" 259 270 330 372 419 THRU rabbets. 8' 301 318 370 406 453 6'0" 9' 311 330 378 416 463 Jamb depth ranges are listed above each column 1/8" increment jamb 10' 321 342 392 430 475 depths (all ranges 3" thru 14") are available at no extra charge. 6'8" 256 273 322 369 420 7' 6' + 260 277 332 375 428 7'2' 268 281 336 381 432 THRU 8' 310 329 376 415 466 8'0" DOUBLES 9' 320 341 384 425 476 ANCHORS - footclips are welded in place. Standard loose jamb anchors are 10' 330 353 398 439 488 included in these prices. 3 per jamb up to 7'6" and 4 per jamb over 7'6". 6'8" 275 295 353 393 434 Complete anchor information is listed in the Engineered Frame Section. 7' 8' + 279 299 363 399 442 7'2' 287 303 367 405 446 Welding charge only per anchor Add 2 THRU 8' 329 351 407 439 480 (Add for appropriate anchor) 10'0" 9' 339 363 415 449 490 10' 349 375 429 463 502 EXTRAS FRAME COMPONENT PART PRICES (NO ANCHORS) BUNDLING AND TAGGING FRAMES 6'8" 65 73 83 98 112 Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, 4F 7' 67 77 87 103 118 component bundling or welded frames Add 4 7'2" 73 79 91 105 120 Visual ID tag Add 4 8' 82 87 97 109 123 9' 85 92 104 115 130 CASED OPENING FRAMES (4 1/2" - 14")

STRIKE JAMBS 10' 93 98 108 120 135 Per frame Add 12 6'8" 75 80 94 109 124 Per piece Add 4 7' 77 82 99 112 128 Cased opening price includes standard mortise hardware preparations, 7'2" 81 84 101 115 130 hinges and strikes or blank. 8' 100 106 119 130 145 9' 105 112 123 135 150 COMMUNICATING FRAME (4 7/8" - 14") HINGE JAMBS 10' 110 118 130 142 156 Available for 1 3/8" or 1 3/4" doors N/C 1'6" THRU 3'0" 42 44 57 66 73 3'+ THRU 4'0" 45 49 60 70 81 4'+ THRU 6'0" 85 90 116 130 147

HEADS 6'+ THRU 8'0" 94 101 122 139 160 8'+ THRU 10'0" 113 123 153 163 174 25 CM-16 KD Frames Frame Prices May, 2018 EXTRAS EXTRAS CURRISEAL FRAME (4 1/8” - 14”) THERMAL BREAK FRAMES - NOT AVAILABLE Gasketed frame price includes gasket. Available for 1 3/4” door HARDWARE PREPARATIONS Singles up to (including) 3072 Add 122 CLOSER PREPARATIONS Singles up to (including) 4080 Add 128 Concealed closer Add 184 Pairs up to (including) 6072 Add 128 Regular arm E10 Add 19 Pairs up to (including) 8072 Add 131 Parallel arm E11 Add 19 Additional gasket prices and stock numbers are listed in the Half sleeve E18 Add 26 Engineered Frame Section. Full sleeve E17 Add 33

DOUBLE EGRESS - NOT AVAILABLE IN KD. PRICE AS CCW FLUSH BOLTS WELDED CONSTRUCTION ONLY Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 DUTCH DOOR FRAME N/C Reinforce Only H1 Add 19

FOUR (4") INCH FACE HEADS (4-3/4" - 14") JAMB HINGE PREPARATIONS Available for 1 3/8" or 1 3/4" doors 4 1/2" standard or heavyweight Standard Single including 4'0" Add 35 1 1/2 pair up to and including 7'6" Standard Pairs over 4'0" Add 49 2 pair over 7'6" to 10'0" Standard 5" standard or heavyweight Add Each 4 GALVANNEAL (A60) FRAME ADDS Full surface mounted continuous hinge reinforcement Add 56 Price per frame piece Add 12 High frequency reinforcement strap support Price per 3-Sided frame Add 36 Per hinge Add 16

GALVANIZED (G-90) HOLDERS Price per frame piece Add 20 Overhead concealed Add 123 Price per 3 sided frame Add 60 Overhead stop & holder surface mounted 14 ga Add 19 PIVOTS FIRE FRAME LABELS Top & bottom set single acting Per frame Add 160 Warnock Hersey - Spedify on order Per jamb Add 68 Embossment; no hourly or 1-1/2 hour ratingStandard Per head Add 92 Metal label with hourly rating on hinge jamb Add 17 Intermediate pivot single acting Each Add 56

Underwriters Laboratories PANIC EXIT REINFORCING Prices are less closer (CL) Rim Type E8 Add 13 LESS Rim vertical rod surface mounted strike E-5 Add 19 CL Vertical rod mortise strike in head - Each G20 Add 47 Single Frame Add 17 Double frame Add 34 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock srike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric Strike frame E9 Add 80 (Includes cover box with knockout)

SURFACE BOLTS Reinforcement only Add 19 26 CM-14 KD Frames Frame Prices

May, 2018

3 6-1/8 8 10 12 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU CURRIES CM series frames are available double rabbet (equal or unequal), single rabbet (2" face X 2 5/8" face ),or cased opening 6 7-7/8 9-7/8 11-7/8 14 profile. Prices reflect hardware preparations for 1 3/4" or 1 3/8" doors. 6'8" 230 244 289 322 369 Refer to CURRIES Arch. Technical Data Manual for standard details 7' 242 254 300 334 380 1'6" and limitations.These frames are intended to be welded and installed 7'2" 247 259 306 338 386 THRU prior to wall construction. This is a drywall profile frame without the 8' 280 301 339 366 412 compression anchor system. Wall anchors must be used. 3'0" 9' 296 311 352 378 423 10' 308 323 367 391 437 All hinge jambs are available with Warnock Hersey Label embossment 6'8" 234 252 292 331 377 at no charge when specified on the order. SINGLES 7' 3' + 246 262 303 343 388 7'2" 251 267 309 347 394 2" face unequal rabbet profile frames are standard. 14 ga. narrow THRU 8' 284 309 342 375 420 face is not available K.D. 4'0" 9' 300 319 355 387 431 EXPANDED KD CAPABILITIES 10' 312 331 370 400 445 Returns can vary 1/2" min. through 1" max (add 15%) 6'8" 295 306 373 409 468 Rabbets can vary 5/8" min. and 6" max. for the non door rabbet. 7' 4' + 305 318 381 417 476 Contact factory for bend limitations on any KD profiles with rabbets 7'2" 311 322 387 423 482 THRU exceeding 6". A 15% add is applicable to frame price for returns and or 8' 355 378 435 463 522 6'0" rabbets. 9' 371 392 447 475 530 10' 383 402 463 489 546 Jamb dept.h ranges are listed above each column 1/8" increment jamb 6'8" 302 321 379 425 482 depths (all ranges 3" thru 14") are available at no extra charge. 7' 6' + 312 333 387 433 490 7'2' 318 337 393 439 496 THRU 8' 362 393 441 479 536 8'0" DOUBLES 9' 378 407 453 491 544 ANCHORS - footclips are welded in place. Standard loose jamb anchors 10' 390 417 469 505 560 are included in these prices. 3 per jamb up to 7'6" and 4 per jamb over 7'6". 6'8" 330 347 417 452 500 Complete anchor information is listed in the Engineered Frame Section. 7' 8' + 340 359 425 460 508 7'2' 346 363 431 466 514 Welding charge only per anchor Add 2 THRU 8' 390 419 479 506 554 (Add for appropriate anchor) 10'0" 9' 406 433 491 518 562 10' 418 443 507 532 578 EXTRAS FRAME COMPONENT PART PRICES (NO ANCHORS) BUNDLING AND TAGGING FRAMES 6'8" 78 87 99 112 129 Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, 4F 7' 85 91 106 120 136 component bundling or welded frames Add 4 7'2" 87 94 109 121 139 Visual ID tag Add 4 8' 96 106 116 127 143 9' 104 109 123 133 150 CASED OPENING FRAMES (4 1/2" - 14")

STRIKE JAMBS 10' 110 116 130 139 156 Per frame Add 12 6'8" 90 94 112 125 143 Per piece Add 4 7' 95 100 116 129 147 Cased opening price includes standard mortise hardware preparations, 7'2" 98 102 119 132 150 hinges and strikes or blank. 8' 118 128 141 150 168 9' 126 135 147 156 172 COMMUNICATING FRAME (4 7/8" - 14") HINGE JAMBS 10' 132 140 155 163 180 Available for 1 3/8" or 1 3/4" doors N/C 1'6" THRU 3'0" 50 51 66 73 85 3'+ THRU 4'0" 54 59 69 82 93 4'+ THRU 6'0" 103 106 137 147 170

HEADS 6'+ THRU 8'0" 110 121 143 163 184 8'+ THRU 10'0" 138 147 181 190 202 27 CM-14 KD Frames Frame Prices May, 2018 EXTRAS EXTRAS CURRISEAL FRAME (4 1/8” - 14”) THERMAL BREAK FRAMES - NOT AVAILABLE Gasketed frame price includes gasket. Available for 1 3/4” door HARDWARE PREPARATIONS Singles up to (including) 3072 Add 122 CLOSER PREPARATIONS Singles up to (including) 4080 Add 128 Concealed closer Add 184 Pairs up to (including) 6072 Add 128 Regular arm E10 Add 19 Pairs up to (including) 8072 Add 131 Parallel arm E11 Add 19 Additional gasket prices and stock numbers are listed in the Half sleeve E18 Add 26 Engineered Frame Section. Full sleeve E17 Add 33

DOUBLE EGRESS - NOT AVAILABLE IN KD. PRICE AS CCW FLUSH BOLTS WELDED CONSTRUCTION ONLY Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 DUTCH DOOR FRAME N/C Reinforce Only H1 Add 19

FOUR (4") INCH FACE HEADS (4-3/4" - 14") JAMB DEPTH HINGE PREPARATIONS Available for 1 3/8" or 1 3/4" doors 4 1/2" standard or heavyweight Standard Single including 4'0" Add 35 1 1/2 pair up to and including 7'6" Standard Pairs over 4'0" Add 49 2 pair over 7'6" to 10'0" Standard 5" standard or heavyweight Add Each 4 GALVANNEAL (A60) FRAME ADDS Full surface mounted continuous hinge reinforcement Add 56 Price per frame piece Add 12 High frequency reinforcement strap support Price per 3-Sided frame Add 36 Per hinge Add 16

GALVANIZED (G-90) HOLDERS Price per frame piece Add 20 Overhead concealed Add 123 Price per 3 sided frame Add 60 Overhead stop & holder surface mounted 14 ga Add 19 PIVOTS FIRE FRAME LABELS Top & bottom set single acting Per frame Add 160 Warnock Hersey - Specify on order Per jamb Add 68 Embossment; no hourly or 1-1/2 hour ratingStandard Per head Add 92 Metal label with hourly rating on hinge jamb Add 17 Intermediate pivot single acting Each Add 56

Underwriters Laboratories PANIC EXIT REINFORCING Prices are less closer (CL) Rim Type E8 Add 13 LESS Rim vertical rod surface mounted strike E5 Add 19 CL Vertical rod mortise strike in head - Each G20 Add 47 Single Frame Add 17 Double frame Add 34 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock srike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric Strike frame E9 Add 80 (Includes cover box with knockout)

SURFACE BOLTS Reinforcement only Add 19 28 E119 Fire Resistive Frames Frame Prices May, 2018

E119 Fire Resistive Glazing Maximum Sizes*

Glass Type UL Fire Visible Glass Max sq. Glass Rating Width x Height inch Thickness Contraflam 60 60 Minute 94-13/16” x 94-13/16” 3283 1-1/8” Contraflam Structure 60 60 Minute 138-1/2” x 138-1/2” 7574 1-1/4” Contraflam 90 90 Minute 94-13/16” x 94-13/16” 4435 1-7/16” Contraflam 120 2 Hour 94-5/8” x 94-5/8” 4435 1-9/16” Contraflam Structure 2 Hour 126” x 126” 4536 2-1/16” Contraflam 180 3 hour 48” x 48” 2304 3-1/2” *No maximum overall unit size. Units are tested as walls. Transoms and sidelights also available.

CONTRAFLAM 180

PLEASE USE THE E119 QUOTE FORM TO REQUEST A QUOTE. 29 E119 Fire Resistive Frames Frame Prices

March, 2019

Date: Distributor Location/Branch Job Name: Requested By: Requested Ship Date: Ship To:

Product Type Product Information Attachments Item Description 60 Min 90 Min. Frame Architectural Elevations With Glass* With Glass* 120 Min. 180 Min. Frame Architectural Detail Drawings With Glass** with Glass** Interior Curtain 60 Min. 120 Min. Architectural Floor Plans Wall With Glass with Glass** 60 Min. 90 Min. Door Specifications: Glass and Frames With Glass* With Glass* Structure Door Schedule

Bullet

Finish Type Enamel Prime Only Hardware schedule

PPG Color # TBD Hardware Templates

Phased Shipping Yes No Phased jobs require breakdown at time of quote.

* Glass to be Contraflam by Vetrotech ** 120/180 Min. frames - required glass ships loose with frame Notes: 30 Notes Frame Prices i Index CCW Flush Stick Prices

May, 2018

DESCRIPTION PAGE PAGE M-16 CCW Flush Sticks 10'6-5/8" Lengths - Stock Only 2-3 M-16 CCW Flush Sticks Per Foot Pricing 4-5 M-14 CCW Flush Sticks 10’6-5/8” Lengths - Stock Only 6-7 M-14 CCW Flush Sticks Per Foot Pricing 8-9 M-12 CCW Flush Sticks 10’6-5/8” Lengths - Stock Only 10-11 M-12 CCW Flush Sticks Per Foot Pricing 12-13 Estimating CCW per Foot M-16 gauge 14 M-14 gauge 15 Glass Stops 18 and 16 gauge 16 12 gauge 17 Cut and Notch Descriptions 18 Pricing Examples of Factory Cut and Notch Frames 19-22 Welded Assemblies 23-25 Closed Profile Seam Pricing 26 2 M-16 CCW Flush Sticks-2" Face, & 1-3/4" Door, 10'6-5/8" Lengths – Stock Only CCW Flush Stick Prices

May, 2018

CCW M 5-3/4 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK CRS RK 21 Plain Rail 90 102 98 110 108 120 138 150 167 179 198 210 23 Plain Rail 4" Face 108 120 118 130 130 142 166 178 201 213 238 250 115 Plain Rail 6" Face 130 142 142 154 156 168 199 211 241 253 286 298 117 Plain Rail 8" Face 130 142 142 154 156 168 199 211 241 253 286 298 40 Cased Open 122 134 132 144 142 154 161 173 192 204 229 241 20 Cased Open 4" Face 147 159 159 171 171 183 193 205 231 243 275 287 26 Strike Jamb All 102 114 110 122 120 132 150 162 179 191 210 222 24 Hinge Jamb 6'8" 25 Hinge Jamb 7'0" 126 138 134 146 144 156 174 186 203 215 234 246 OPEN SECTION 39 Hinge Jamb 7'2" 62 Hinge Jamb 7'10" 63 Hinge Jamb 8'0" 138 150 146 158 156 168 186 198 215 227 246 258 119 Hinge Jamb 9'0" 120 Hinge Jamb 10'0"

CCW DIMENSION 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME NO. CRS RK CRS RK CRS RK CRS RK CRS RK 19 Cover Plate (Flat Corner) 81 93 82 94 86 98 102 114 122 134 27 Filler Plate w/out Stop 108 120 114 126 132 144 158 170 190 202 22 Filler Plate with Stop 114 126 122 134 139 151 167 179 199 211 29 Head Cap 132 144 142 154 161 173 192 204 229 241 91 Channel Head Reinf . 132 144 142 154 161 173 192 204 229 241 92 Full Width Head Reinf . 98 110 108 120 138 150 167 179 198 210 28 Full Jamb Depth 4" Face 325 337 331 343 360 372 431 443 517 529 139 Full Jamb Depth 6" Face 390 402 397 409 432 444 517 529 620 632 140 Full Jamb Depth 8" Face MISCELLANEOUS 51 2-Way Corner 1-9/16" O.S. 357 369 381 393 441 453 528 540 633 645 52 2-Way Corner 1-15/16" O.S. 53 3-Way Corner 1-9/16" O.S . 428 440 456 468 494 506 592 604 711 723 54 3-Way Corner 1-15/16" O.S .

1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . 18 gauge CCW price is - 10% deduct from 16 gauge price . NOTE: Faces over 7”, maximum rail length is 120” 3 M-16 CCW Flush Sticks-2" Face, 1-3/8" & 1-3/4" Door, 10'6-5/8" Lengths – Stock Only CCW Flush Stick Prices

May, 2018

CCW 3 THRU 66-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 MULLION TYPE DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK 16 Plain 218 230 249 261 270 282 324 336 386 398 17 Plain 4" Face 262 274 299 311 324 336 389 401 463 475 18 Plain 6" Face 315 327 359 371 389 401 467 479 556 568 50 Plain 8" Face 315 327 359 371 389 401 467 479 556 568 41 Strike All 230 242 261 273 282 294 336 348 398 410 42 Single Hinge 6'8" 43 Single Hinge 7'0" 254 266 285 297 306 318 360 372 422 434 44 Single Hinge 7'2" 81 Single Hinge 7'10" 82 Single Hinge 8'0" 266 278 297 309 318 330 372 384 434 446 133 Single Hinge 9'0" 134 Single Hinge 10'0" 45 Hinge & Strike 6'8" 46 Hinge & Strike 7'0" 266 278 297 309 318 330 372 384 434 446 47 Hinge & Strike 7'2" 83 Hinge & Strike 7'10" 84 Hinge & Strike 8'0" 278 290 309 321 330 342 384 396 446 458

CLOSED SECTION MULLION 135 Hinge & Strike 9'0" 136 Hinge & Strike 10'0" 85 Double Strike All 242 254 273 285 294 306 348 360 410 422 86 Double Hinge 6'8" 87 Double Hinge 7'0" 290 302 321 333 342 354 396 408 458 470 88 Double Hinge 7'2" 89 Double Hinge 7'10" 90 Double Hinge 8'0" 314 326 345 357 366 378 420 432 482 494 137 Double Hinge 9'0" 138 Double Hinge 10'0"

1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . 18 gauge price is - 10% deduct from 16 gauge price . NOTE: Faces over 7”, maximum rail length is 120” 4 M-16 CCW Flush Stick - 2" Face, 1-3/8" & 1-3/4" Door CCW Flush Stick Prices May, 2018

PER FOOT PRICING - "ESTIMATING"

CCW M 5-3/4 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK CRS RK 21 Plain Rail 8.57 9.71 9.33 10.48 10.29 11.43 13.14 14.29 15.90 17.05 18.86 20.00 23 Plain Rail 4" Face 10.29 11.43 11.24 12.38 12.38 13.52 15.81 16.95 19.14 20.29 22.67 23.81 115 Plain Rail 6" Face 12.38 13.52 13.52 14.67 14.86 16.00 18.95 20.10 22.95 24.10 27.24 28.38 117 Plain Rail 8" Face 12.38 13.52 13.52 14.67 14.86 16.00 18.95 20.10 22.95 24.10 27.24 28.38 40 Cased Open 11.62 12.76 12.57 13.71 13.52 14.67 15.33 16.48 18.29 19.43 21.81 22.95 OPEN SECTION 20 Cased Open 4" Face 14.00 15.14 15.14 16.29 16.29 17.43 18.38 19.52 22.00 23.14 26.19 27.33

CCW 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK Cover Plate (Flat 19 7.71 8.86 7.81 8.95 8.19 9.33 9.71 10.86 11.62 12.76 Corner) 27 Filler Plate w/out Stop 10.29 11.43 10.86 12.00 12.57 13.71 15.05 16.19 18.10 19.24 22 Filler Plate with Stop 10.86 12.00 11.62 12.76 13.24 14.38 15.90 17.05 18.95 20.10 29 Head Cap 12.57 13.71 13.52 14.67 15.33 16.48 18.29 19.43 21.81 22.95 91 Channel Head Reinf. 12.57 13.71 13.52 14.67 15.33 16.48 18.29 19.43 21.81 22.95 92 Full Width Head Reinf . 9.33 10.48 10.29 11.43 13.14 14.29 15.90 17.05 18.86 20.00 28 Full Jamb Depth 4" Face 30.95 32.10 31.52 32.67 34.29 35.43 41.05 42.19 49.24 50.38 139 Full Jamb Depth 6" Face 37.14 38.29 37.81 38.95 41.14 42.29 49.24 50.38 59.05 60.19

MISCELLANEOUS 140 Full Jamb Depth 8" Face 51 2-Way Corner 1-9/16" O.S. 34.00 35.14 36.29 37.43 42.00 43.14 50.29 51.43 60.29 61.43 52 2-Way Corner 1-15/16" O.S. 53 3-Way Corner 1-9/16" O S. 40.76 41.90 43.43 44.57 47.05 48.19 56.38 57.52 67.71 68.86 54 3-Way Corner 1-15/16" O.S.

Additional standard 4-1/2" hinge or standard (E1, E2, E3, E4) strike preparations can be added to these stick prices for $12.00 list per each preparation . 1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . 18 gauge CCW price is - 10% deduct from 16 gauge price . 5 M-16 CCW Flush Sticks - 2" Face, 1-3/8" & 1-3/4" Door CCW Flush Stick Prices May, 2018

PER FOOT PRICING - "ESTIMATING"

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 CCW NO. MULLION TYPE DIMENSION CRS RK CRS RK CRS RK CRS RK CRS RK 16 Plain 20.76 21.90 23.71 24.86 25.71 26.86 30.86 32.00 36.76 37.90 17 Plain 4" Face 24.95 26.10 28.48 29.62 30.86 32.00 37.05 38.19 44.10 45.24 18 Plain 6" Face 30.00 31.14 34.19 35.33 37.05 38.19 44.48 45.62 52.95 54.10 CLOSED SECTION MULLION 50 Plain 8" Face 30.00 31.14 34.19 35.33 37.05 38.19 44.48 45.62 52.95 54.10

Additional standard 4-1/2" hinge or standard (E1, E2, E3, E4) strike preparations can be added to these stick prices for $12.00 list per each preparation . 1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . 18 gauge price is - 10% deduct from 16 gauge price .

ESTIMATING COST PER INCH CCW ONLY Multiply the cost per foot by the following conversion factor:

1"= .083 2"= .167 3"= .250 4"= .333 5"= .417 6"= .50 7"= .583 8"= .667 9"= .750 10"= .834 11"= .917 6 M-14 CCW Flush Sticks-2" Face, 1-3/8" & 1-3/4" Door, 10'6-5/8" Lengths – Stock Only CCW Flush Stick Prices May, 2018

CCW M 5-3/4 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK CRS RK 21 Plain Rail 107 119 116 128 128 140 163 175 192 204 228 240 23 Plain Rail 4" Face 129 141 139 151 154 166 196 208 231 243 274 286 115 Plain Rail 6" Face 155 167 167 179 185 197 235 247 277 289 329 341 117 Plain Rail 8" Face 155 167 167 179 185 197 235 247 277 289 329 341 40 Cased Open 145 157 157 169 167 179 190 202 221 233 265 277 20 Cased Open 4" Face 174 186 189 201 201 213 228 240 265 277 318 330 26 Strike Jamb All 119 131 128 140 140 152 175 187 204 216 240 252 24 Hinge Jamb 6'8" 25 Hinge Jamb 7'0" 143 155 152 164 164 176 199 211 228 240 264 276 OPEN SECTION 39 Hinge Jamb 7'2" 62 Hinge Jamb 7'10" 63 Hinge Jamb 8'0" 155 167 164 176 176 188 211 223 240 252 276 288 119 Hinge Jamb 9'0" 120 Hinge Jamb 10'0"

CCW 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK

19 Cover Plate (Flat Corner) 96 108 98 110 102 114 118 130 140 152

27 Filler Plate w/out Stop 127 139 136 148 157 169 183 195 220 232 22 Filler Plate with Stop 136 148 142 154 165 177 192 204 229 241 29 Head Cap 157 169 167 179 190 202 221 233 265 277 91 Channel Head Reinf. 157 169 167 179 190 202 221 233 265 277 92 Full Width Head Reinf . 116 128 128 140 163 175 192 204 228 240 28 Full Jamb Depth 4" Face 386 398 393 405 427 439 496 508 595 607 139 Full Jamb Depth 6" Face 476 488 486 498 527 539 614 626 735 747

MISCELLANEOUS 140 Full Jamb Depth 8" Face 51 2-Way Corner 1-9/16" O.S. 422 434 453 465 522 534 607 619 726 738 52 2-Way Corner 1-15/16" O.S. 53 3-Way Corner 1-9/16" O.S. 506 518 540 552 585 597 681 693 817 829 54 3-Way Corner 1-15/16" O.S.

1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . 18 gauge CCW price is - 10% deduct from 16 gauge price . NOTE: Faces over 7”, maximum rail length is 120” 7 M-14 CCW Flush Sticks 2" Face, 1-3/8" & 1-3/4" Door, 10'6-5/8" Lengths – Stock Only CCW Flush Stick Prices May, 2018

CCW 3 THRU 66-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 MULLION TYPE DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK 16 Plain 258 270 296 308 320 332 371 383 444 456 17 Plain 4" Face 310 322 355 367 384 396 445 457 533 545 18 Plain 6" Face 372 384 426 438 461 473 534 546 640 652 50 Plain 8" Face 372 384 426 438 461 473 534 546 640 652 41 Strike All 270 282 308 320 332 344 383 395 456 468 42 Single Hinge 6'8" 43 Single Hinge 7'0" 294 306 332 344 356 368 407 419 480 492 44 Single Hinge 7'2" 81 Single Hinge 7'10" 82 Single Hinge 8'0" 133 Single Hinge 9'0" 306 318 344 356 368 380 419 431 492 504 134 Single Hinge 10'0" 45 Hinge & Strike 6'8" 46 Hinge & Strike 7'0" 306 318 344 356 368 380 419 431 492 504 47 Hinge & Strike 7'2" 83 Hinge & Strike 7'10"

CLOSED SECTION MULLION 84 Hinge & Strike 8'0" 135 Hinge & Strike 9'0" 318 330 356 368 380 392 431 443 504 516 136 Hinge & Strike 10'0" 85 Double Strike All 282 294 320 332 344 356 395 407 468 480 86 Double Hinge 6'8" 87 Double Hinge 7'0" 330 342 368 380 392 404 443 455 516 528 88 Double Hinge 7'2" 89 Double Hinge 7'10" 90 Double Hinge 8'0" 137 Double Hinge 9'0" 354 366 392 404 416 428 467 479 540 552 138 Double Hinge 10'0"

1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . NOTE: Faces over 7”, maximum rail length is 120” 8 M-14 CCW Flush Sticks-2" Face, 1-3/8" & 1-3/4" Door CCW Flush Stick Prices May, 2018

PER FOOT PRICING - "ESTIMATING"

CCW M 5-3/4 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK CRS RK 21 Plain Rail 10.19 11.33 11.05 12.19 12.19 13.33 15.52 16.67 18.29 19.43 21.71 22.86 23 Plain Rail 4" Face 12.29 13.43 13.24 14.38 14.67 15.81 18.67 19.81 22.00 23.14 26.10 27.24 115 Plain Rail 6" Face 14.76 15.90 15.90 17.05 17.62 18.76 22.38 23.52 26.38 27.52 31.33 32.48 117 Plain Rail 8" Face 14.76 15.90 15.90 17.05 17.62 18.76 22.38 23.52 26.38 27.52 31.33 32.48 40 Cased Open 13.81 14.95 14.95 16.10 15.90 17.05 18.10 19.24 21.05 22.19 25.24 26.38 OPEN SECTION 20 Cased Open 4" Face 16.57 17.71 18.00 19.14 19.14 20.29 21.71 22.86 25.24 26.38 30.29 31.43

CCW 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK 19 Cover Plate (Flat Corner) 9.14 10.29 9.33 10.48 9.71 10.86 11.24 12.38 13.33 14.48 27 Filler Plate w/out Stop 12.10 13.24 12.95 14.10 14.95 16.10 17.43 18.57 20.95 22.10 22 Filler Plate with Stop 12.95 14.10 13.52 14.67 15.71 16.86 18.29 19.43 21.81 22.95 29 Head Cap 14.95 16.10 15.90 17.05 18.10 19.24 21.05 22.19 25.24 26.38 91 Channel Head Reinf . 14.95 16.10 15.90 17.05 18.10 19.24 21.05 22.19 25.24 26.38 92 Full Width Head Reinf. 11.05 12.19 12.19 13.33 15.52 16.67 18.29 19.43 21.71 22.86 28 Full Jamb Depth 4" Face 36.76 37.90 37.43 38.57 40.67 41.81 47.24 48.38 56.67 57.81 139 Full Jamb Depth 6" Face 45.33 46.48 46.29 47.43 50.19 51.33 58.48 59.62 70.00 71.14 140 Full Jamb Depth 8" Face MISCELLANEOUS 51 2-Way Corner 1-9/16" O.S. 40.19 41.33 43.14 44.29 49.71 50.86 57.81 58.95 69.14 70.29 52 2-Way Corner 1-15/16" O.S. 53 3-Way Corner 1-9/16" O.S. 48.19 49.33 51.43 52.57 55.71 56.86 64.86 66.00 77.81 78.95 54 3-Way Corner 1-15/16" O.S.

Additional standard 4-1/2" hinge or standard (E1, E2, E3, E4) strike preparations can be added to these stick prices for $12.00 list per each preparation . 1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . 9 M-14 CCW Flush Sticks - 2" Face, 1-3/8" & 1-3/4" Door CCW Flush Stick Prices May, 2018

PER FOOT PRICING - "ESTIMATING" CCW 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK 16 Plain 24.57 25.71 28.19 29.33 30.48 31.62 35.33 36.48 42.29 43.43 17 Plain 4" Face 29.52 30.67 33.81 34.95 36.57 37.71 42.38 43.52 50.76 51.90 18 Plain 6" Face 35.43 36.57 40.57 41.71 43.90 45.05 50.86 52.00 60.95 62.10 CLOSED SECTION MULLION 50 Plain 8" Face 35.43 36.57 40.57 41.71 43.90 45.05 50.86 52.00 60.95 62.10

Additional standard 4-1/2" hinge or standard (E1, E2, E3, E4) strike preparations can be added to these stick prices for $12.00 list per each preparation . 1", 1-1/4", 1-1/2", 1-3/4" face available — no charge .

ESTIMATING COST PER INCH CCW ONLY Multiply the cost per foot by the following conversion factor:

1"= .083 2"= .167 3"= .250 4"= .333 5"= .417 6"= .50 7"= .583 8"= .667 9"= .750 10"= .834 11"= .917 10 M-12 CCW Flush Sticks 2" Face, 1-3/8" & 1-3/4" Door, 10'6-5/8" Lengths CCW Flush Stick Prices May, 2018 1/2" MINIMUM BACKBEND (INCLUDING 5-3/4)

CCW M 5-3/4 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK CRS RK 21 Plain Rail 180 192 196 208 216 228 276 288 334 346 396 408 23 Plain Rail 4" Face 216 228 235 247 259 271 331 343 401 413 475 487 115 Plain Rail 6" Face 259 271 282 294 311 323 397 409 481 493 570 582 117 Plain Rail 8" Face 259 271 282 294 311 323 397 409 481 493 570 582 40 Cased Open 244 256 264 276 284 296 322 334 384 396 458 470 20 Cased Open 4" Face 293 305 317 329 341 353 387 399 461 473 550 562 26 Strike Jamb All 192 204 208 220 228 240 288 300 346 358 408 420 24 Hinge Jamb 6'8" 25 Hinge Jamb 7'0" 216 228 232 244 252 264 312 324 370 382 432 444 OPEN SECTION 39 Hinge Jamb 7'2" 62 Hinge Jamb 7'10" 63 Hinge Jamb 8'0" 119 Hinge Jamb 9'0" 228 240 244 256 264 276 324 336 382 394 444 456 120 Hinge Jamb 10'0"

CCW 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK 19 Cover Plate (Flat Corner) 162 179 164 181 172 190 204 222 244 264 27 Filler Plate w/out Stop 216 235 228 247 264 284 316 338 380 404 22 Filler Plate with Stop 228 247 244 264 278 299 334 356 398 422 29 Head Cap 264 284 284 305 322 344 384 408 458 484 91 Channel Head Reinf . 264 284 284 305 322 344 384 408 458 484 92 Full Width Head Reinf . 196 214 216 235 276 297 334 356 396 420 28 Full Jamb Depth 4" Face 650 682 662 694 720 754 862 900 1034 1077 139 Full Jamb Depth 6" Face 780 816 794 830 864 902 1034 1077 1240 1290 140 Full Jamb Depth 8" Face MISCELLANEOUS 51 2-Way Corner 1-9/16" O.S. 714 748 762 797 882 921 1056 1100 1266 1316 52 2-Way Corner 1-15/16" O.S. 53 3-Way Corner 1-9/16" O.S. 856 894 912 952 988 1030 1184 1232 1422 1477 54 3-Way Corner 1-15/16" O.S.

1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . NOTE: Faces over 7”, maximum rail length is 120” 11 M-12 CCW Flush Sticks 2" Face, 1-3/8" & 1-3/4" Door, 10'6-5/8" Lengths CCW Flush Stick Prices May, 2018

CCW 3 THRU 66-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 MULLION TYPE DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK 16 Plain 436 448 498 510 540 552 648 660 772 784 17 Plain 4" Face 523 535 598 610 648 660 778 790 927 939 18 Plain 6" Face 628 640 718 730 778 790 934 946 1113 1125 50 Plain 8" Face 628 640 718 730 778 790 934 946 1113 1125 41 Strike All 448 460 510 522 552 564 660 672 784 796 42 Single Hinge 6'8" 43 Single Hinge 7'0" 472 484 534 546 576 588 684 696 808 820 44 Single Hinge 7'2" 81 Single Hinge 7'10" 82 Single Hinge 8'0" 133 Single Hinge 9'0" 484 496 546 558 588 600 696 708 820 832 134 Single Hinge 10'0" 45 Hinge & Strike 6'8" 46 Hinge & Strike 7'0" 484 496 546 558 588 600 696 708 820 832 47 Hinge & Strike 7'2" 83 Hinge & Strike 7'10"

CLOSED SECTION MULLION 84 Hinge & Strike 8'0" 135 Hinge & Strike 9'0" 496 508 558 570 600 612 708 720 832 844 136 Hinge & Strike 10'0" 85 Double Strike All 460 472 522 534 564 576 672 684 796 808 86 Double Hinge 6'8" 87 Double Hinge 7'0" 508 520 570 582 612 624 720 732 844 856 88 Double Hinge 7'2" 89 Double Hinge 7'10" 90 Double Hinge 8'0" 137 Double Hinge 9'0" 532 544 594 606 636 648 744 756 868 880 138 Double Hinge 10'0"

1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . NOTE: Faces over 7”, maximum rail length is 120” 12 M-12 CCW Flush Sticks 2" Face, 1-3/8" & 1-3/4" Door CCW Flush Stick Prices May, 2018

1/2" MINIMUM BACKBEND (INCLUDING 5-3/4)

CCW M 5-3/4 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK CRS RK 21 Plain Rail 17.14 18.29 18.67 19.81 20.57 21.71 26.29 27.43 31.81 32.95 37.71 38.86 23 Plain Rail 4" Face 20.57 21.71 22.38 23.52 24.67 25.81 31.52 32.67 38.19 39.33 45.24 46.38 115 Plain Rail 6" Face 24.67 25.81 26.86 28.00 29.62 30.76 37.81 38.95 45.81 46.95 54.29 55.43 117 Plain Rail 8" Face 24.67 25.81 26.86 28.00 29.62 30.76 37.81 38.95 45.81 46.95 54.29 55.43 40 Cased Open 23.24 24.38 25.14 26.29 27.05 28.19 30.67 31.81 36.57 37.71 43.62 44.76 OPEN SECTION 20 Cased Open 4" Face 27.90 29.05 30.19 31.33 32.48 33.62 36.86 38.00 43.90 45.05 52.38 53.52

CCW 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 ITEM NAME DIMENSION NO. CRS RK CRS RK CRS RK CRS RK CRS RK 19 Cover Plate (Flat Corner) 15.43 17.07 15.62 17.26 16.38 18.05 19.43 21.19 23.24 25.11 27 Filler Plate w/out Stop 20.57 22.37 21.71 23.54 25.14 27.07 30.10 32.18 36.19 38.45 22 Filler Plate with Stop 21.71 23.54 23.24 25.11 26.48 28.45 31.81 33.94 37.90 40.22 29 Head Cap 25.14 27.07 27.05 29.04 30.67 32.76 36.57 38.85 43.62 46.10 91 Channel Head Reinf . 25.14 27.07 27.05 29.04 30.67 32.76 36.57 38.85 43.62 46.10 92 Full Width Head Reinf . 18.67 20.40 20.57 22.37 26.29 28.25 31.81 33.94 37.71 40.02 28 Full Jamb Depth 4" Face 61.90 64.94 63.05 66.12 68.57 71.81 82.10 85.74 98.48 102.61 139 Full Jamb Depth 6" Face 74.29 77.69 75.62 79.06 82.29 85.93 98.48 102.61 118.10 122.82 140 Full Jamb Depth 8" Face MISCELLANEOUS 51 2-Way Corner 1-9/16" O.S. 68.00 71.22 72.57 75.93 84.00 87.70 100.57 104.77 120.57 125.37 52 2-Way Corner 1-15/16" O.S. 53 3-Way Corner 1-9/16" O.S. 81.52 85.15 86.86 90.64 94.10 98.10 112.76 117.32 135.43 140.67 54 3-Way Corner 1-15/16" O.S.

Additional standard 4-1/2" hinge or standard (E1, E2, E3, E4) strike preparations can be added to these stick prices for $12.00 list per each preparation . 1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . NOTE: Faces over 7”, maximum rail length is 120” 13 M-12 CCW Flush Sticks 2" Face, 1-3/8" & 1-3/4" Door CCW Flush Stick Prices May, 2018

3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 CCW NO. MULLION TYPE DIMENSION CRS RK CRS RK CRS RK CRS RK CRS RK 16 Plain 41.52 42.67 47.43 48.57 51.43 52.57 61.71 62.86 73.52 74.67 17 Plain 4" Face 49.81 50.95 56.95 58.10 61.71 62.86 74.10 75.24 88.29 89.43 18 Plain 6" Face 59.81 60.95 68.38 69.52 74.10 75.24 88.95 90.10 106.00 107.14 CLOSED SECTION MULLION 50 Plain 8" Face 59.81 60.95 68.38 69.52 74.10 75.24 88.95 90.10 106.00 107.14

Additional standard 4-1/2" hinge or standard (E1, E2, E3, E4) strike preparations can be added to these stick prices for $12.00 list per each preparation . 1", 1-1/4", 1-1/2", 1-3/4" face available — no charge . NOTE: Faces over 7”, maximum rail length is 120” 14 Estimating CCW Per Foot M-16 Ga. CCW Flush Stick Prices August, 2018

PRICE PER FOOT ESTIMATED JAMB DEPTH 5-3/4 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 STEEL TYPE CRS RK CRS RK CRS RK CRS RK CRS RK CRS RK Open Section 2" Face 8.57 9.71 9.33 10.48 10.29 11.43 13.14 14.29 15.90 17.05 18.86 20.00 Open Section 4" Face 10.29 11.43 11.24 12.38 12.38 13.52 15.81 16.95 19.14 20.29 22.67 23.81 Mullion 2" Face 20.76 21.90 23.71 24.86 25.71 26.86 30.86 32.00 36.76 37.90 Mullion 4" Face 24.95 26.10 28.48 29.62 30.86 32.00 37.05 38.19 44.10 45.24

Glass Stop 5/8 x 5/8 2.86

Glass Stop 5/8 x 1 3.14

This per foot estimating formula includes foot clips and mullion stirrup anchors. All other anchor types are extra. Anchors must be ordered separately and will be invoiced accordingly . Other CCW component prices will work in this formula by using a per foot price of the published 10 foot, 6 inch price . Single door opening 1 1/2 pair hinge preparations and strike Add 48 (4-1/2” hinge) 2 pair hinge preparations and strike Add 60 Double Door Opening 3 pair hinge preparations Add 72 (4-1/2” hinge) 4 pair hinge preparations Add 96 Additional hinge or strike preparations (Per Preparation) Add 12 Saw miter (SMO) per cut Add 13 Butt end notch (SBE) per notch Add 10 Welded miter corner Add 64 Welded butt end corner less than 3” face Add 55 Welded butt end corner 3” face or larger Add 84 ESTIMATING COST PER INCH CCW ONLY Multiply the cost per foot by the following conversion factor:

1"=.083 2"=.167 3"=.250 4"=.333 5"=.417 6"=.50 7"=.583 8"=.667 9"=.750 10"=.834 11"=.917 15 Estimating CCW Per Foot M-14 Ga. CCW Flush Stick Prices August, 2018

x

x

x

x

x

PRICE PER FOOT ESTIMATED JAMB DEPTH 5-3/4 3 THRU 6 6-1/8 THRU 7-7/8 8 THRU 9-7/8 10 THRU 11-7/8 12 THRU 14 STEEL TYPE CRS RK CRS RK CRS RK CRS RK CRS RK CRS RK Open Section 2" Face 10.19 11.33 11.05 12.19 12.19 13.33 15.52 16.67 18.29 19.43 21.71 22.86 Open Section 4" Face 12.29 13.43 13.24 14.38 14.67 15.81 18.67 19.81 22.00 23.14 26.10 27.24 Mullion 2" Face 24.57 25.71 28.19 29.33 30.48 31.62 35.33 36.48 42.29 43.43 Mullion 4" Face 29.52 30.67 33.81 34.95 36.57 37.71 42.38 43.52 50.76 51.90

Glass Stop 5/8 x 5/8 2.86

Glass Stop 5/8 x 1 3.14

This per foot estimating formula includes foot clips and mullion stirrup anchors. All other anchor types are extra. Anchors must be ordered separately and will be invoiced accordingly. Other CCW component prices will work in this formula by using a per foot price of the published 10 foot, 6 inch price. Single door opening 1 1/2 pair hinge preparations and strike Add 48 (4-1/2” hinge) 2 pair hinge preparations and strike Add 60 Double Door Opening 3 pair hinge preparations Add 72 (4-1/2” hinge) 4 pair hinge preparations Add 96 Additional hinge or strike preparations (Per Preparation) Add 12 Saw miter (SMO) per cut Add 13 Butt end notch (SBE) per notch Add 10 Welded miter corner Add 64 Welded butt end corner less than 3” face Add 55 Welded butt end corner 3” face or larger Add 84 (Factory weld charges do not include the cut charges) ESTIMATING COST PER INCH CCW ONLY Multiply the cost per foot by the following conversion factor:

1"=.083 2"=.167 3"=.250 4"=.333 5"=.417 6"=.50 7"=.583 8"=.667 9"=.750 10"=.834 11"=.917 16 Glass Stop - 18 Ga. and 16 Ga. CCW Flush Stick Prices May, 2018

STAINLESS ITEMCCW DESCRIPTION 18 GAUGE GALV. STEEL 16 GA. 93 Glass Stop 10' 6-5/8"5/8" Ht x 5/8" — Painted/Punched * 30 NA 97 Glass Stop 10' 6-5/8"5/8" Ht x 5/8" — Painted/Not Punched 30 NA 101 Glass Stop 10' 6-5/8"5/8" Ht x 5/8" — Unpainted/Not Punched 20 181 105 Glass Stop 10' 6-5/8"5/8" Ht x 5/8" — Unpainted/Punched * 25 236 94 Glass Stop 10' 6-5/8"5/8" Ht x 1" — Painted/Punched * 33 NA 98 Glass Stop 10' 6-5/8"5/8" Ht x 1" — Painted/Not Punched 27 NA 102 Glass Stop 10' 6-5/8"5/8" Ht x 1" — Unpainted/Not Punched 21 188 106 Glass Stop 10' 6-5/8"5/8" Ht x 1" — Unpainted/Punched * 28 266

STAINLESS ITEMCCW DESCRIPTION 16 GAUGE GALV. STEEL 16 GA. 95 Glass Stop 10' 6-5/8"3/4" Ht x 5/8" — Painted/Punched * 31 NA 99 Glass Stop 10' 6-5/8"3/4" Ht x 5/8" — Painted/Not Punched 27 NA 103 Glass Stop 10' 6-5/8"3/4" Ht x 5/8"— Unpainted/Not Punched 21 188 107 Glass Stop 10' 6-5/8"3/4" Ht x 5/8" — Unpainted/Punched * 28 266 96 Glass Stop 10' 6-5/8"3/4" Ht x 1" — Painted/Punched * 37 NA 100 Glass Stop 10' 6-5/8"3/4" Ht x 1" — Painted/Not Punched 30 NA 104 Glass Stop 10' 6-5/8"3/4" Ht x 1" — Unpainted/Not Punched 25 236 108 Glass Stop 10' 6-5/8"3/4" Ht x 1" — Unpainted/Punched * 31 297

111 Spreader Bar 10'6-5/8" (Shipping)Unpainted /Not Punched - 16 Ga . 3/8” x 1” 14 127

5/8" x 1" 37 NA 175 ** Glass Stop 10'6-1/2" Painted/Punched * 3/4" x 1" 33 NA 1" x 1" 33 NA 5/8" x 1" 72 NA 177 Glass Stop 10’6-1/2” Painted/Punched * 3/4" x 1" 74 NA 1" x 1" 75 NA

* Punched glass stop include #8 Tek self drilling and tapping screws . Hole punching on glass stop is standard 12 inch on center for oval head screw size #8 . ** 10 ga . available for Bullet Resistant windows . Contact factory . 17 Glass Stop - 12 Ga. CCW Flush Stick Prices May, 2018

ITEM CCW DESCRIPTION 12 GAUGE GALV.

151 Glass Stop 10'6-1/2" 3/4" Ht x 3/4" 12 ga . – Painted/Punched * 92

153 Glass Stop 10'6-1/2" 1" Ht . x 3/4" 12 ga . – Painted/Punched * 96

155 Glass Stop 10'6-1/2" 1-1/4" Ht x 3/4" 12 ga .–Painted/Punched * 100

201 Glass Stop 10'6-5/8" 5/8" H x 3/4" 12 ga . – Painted/Punched * 89

* Screw holes are 1/4" ovals punched 1-1/2" from each end and on 6" center lines for 1/4-28 UNC screws. Note: 1/4-28 UNC screws are not provided with punched glass stops this page . Factory welded frames using these stops will have glass stops installed with Torx head screws. 1/4-28 UNC screws are stock #MS004507 @ $176.75 per 100 ea . 22 screws per 10'6" length required Glass stops set in place with spacing for glazing as specified on an elevation . Add $9 per foot for installation . Customer must note which rabbet and the pocket size. 5/8” x 5/8” glass stop standard unless indicated otherwise. 18 Cut and Notch Descriptions CCW Flush Stick Prices May, 2018

S.M.O. (Saw Miter Only) Per cut $13.00

45° angle cut 2 cuts required per frame corner

S.B.E. (Saw Butt End) Per joint $10.00

Notch stop to butt adjoin- ing member . Used to join two jamb members with different face dimensions or profiles in the case of Double Egress.

Typical elevation sample saw miter

S.B.E. (Saw Butt End) Per joint $10.00

Notch both stops on mullion to butt adjoining member.

OPTION B OPTION C No Charge Price open Price vertical section member OPTION A mullion full and filler plate $66.00 height. Cut and with stop. remove stop, Required for leaving M-type some profiles. Full splice joint . Closed section to open return. section . Required when open section See page 26 for has drywall return. Recommended details.

Not Recommended 19 Pricing Examples of Factory Cut and Notch Frames CCW Flush Stick Prices May, 2018

CCW PRICING KD PERIMETER ITEM SIZE (QTY) COST TOTALITEM SIZE (QTY) COST TOTAL B and C 21' x 9.33 = 195.93 B and C 3090 frame x 234 = 234.00 A 2'8" = 2 .667 x 23.71 = 63.23 A 2'8" = 2 .667 x 23.71 = 63.23 Single Door (3 hinges, 1 strike) 12.00 = 48.00 Glass Stop 10' x 2.86 = 28.60 Glass Stop 10' x 2.86 = 28.60 WEWA (10) x 6.00 = 60.00 WEWA 10 x 6 .00 = 60 .00 Saw Butt Cuts (2) x 10.00 = 20.00 Saw Miter Cuts (4) x 13.00 = 52.00 Frame Bundle Charge (1) x 4.00 = 4.00 Saw Butt Cuts (2) x 10.00 = 20.00TOTAL 409.83 Frame Bundle Charge (1) x 4.00 = 4.00 TOTAL 411.76 20 Pricing Examples of Factory Cut and Notch Frames CCW Flush Stick Prices May, 2018

CCW PRICING KD PERIMETER ITEM SIZE (QTY)COST TOTAL ITEM SIZE (QTY) COST TOTAL A and C 18'10"=18.834 x 9.33 = 175.72 ①Hinge jamb 7'(1) x = 72.00 B mullion full height* 7' x 23.71 = 165.97 ②Head 5'8" (1) x = 71.00 Single Door (3 hinges, 1 strike) 12.00 = 48.00 ③Blank jamb 3' x 9.33 = 27.99 Glass Stop 10' x 2.86 = 28.60 ④Jamb mitre x = 13.00 MW anchors (6) x 2.00 = 12.00 ⑤Head 2'6" (1) x =34 Saw Miter Cuts (6) x 13.00 = 78.00 ⑥Stop notch (2) x 10.00 = 20.00 Saw Butt Cuts (2) x 10.00 = 20.00 B mullion full height 7' x 23.71 = 165.97 Frame Bundle Charge (1) x 4.00 = 4.00 Stirke in mullion (1) x 12.00 = 12.00 TOTAL 532.29 Glass stop 10' x 2.86 = 28.60 * Mullion is priced full height and bottom half stop is cut out; MW anchors (6) x 2.00 = 12.00 not charge to wrap wall. Frame bundle charge (1) x 4.00 = 4.00 TOTAL 165.97 * $ is per foot 7' blank strike jamb price. 21 Pricing Examples of Factory Cut and Notch Frames CCW Flush Stick Prices May, 2018

CCW PRICING KD PERIMETER ITEM SIZE (QTY)COST TOTAL ITEM SIZE (QTY) COST TOTAL E and F 21'4"=21.33x 10.29 = 219.49 E and F 5080 Frame x=308.00 A and B 9'2"=9.167 x 23.71 = 217.35 A and B 9'2"=9.167 x 23.71 = 217.35 C 1'4"=1.33x 14.86 = 19.76 C 1'4"=1.33 x 14.86 = 19.76 Single Door (4 hinges, 1 strike) 12.00 = 60.00 Glass Stop 19' x 2.86 = 54.34 Glass Stop 19'x 2.86 = 54.34 WWS Anchors (8) x 4.00 = 32.00 WWS anchors (8) x 4.00 = 32.00 Saw Butt Cuts (5) x 10.00 = 50.00 Saw Miter Cuts (4)x 13.00 = 52.00 Frame Bundle Charge (1) x 4.00 = 4.00 Saw Butt Cuts (5) x 10.00 = 50.00TOTAL 685.45 Frame Bundle Charge (1) x 4.00 = 4.00 Note: E and F consist of HJ, BJ and head price. TOTAL 708.94 22 Pricing Examples of Factory Cut and Notch Frames CCW Flush Stick Prices May, 2018

CCW PRICING KD PERIMETER ITEM SIZE (QTY)COST TOTAL ITEM SIZE (QTY) COST TOTAL C and D 15'x 14.29 = 214.35 C and D 7'2" Strike Jamb (2) x 98 = 196 A and B 21'10"=21.834x 16.95 = 370.09 A 10', 4" Face Head (1) x 201 = 201 E and F 20'10"=20.83426.86 = 559.60 3', 4" Face Head (1) x 96 =96 Single Door (3 hinges, 1 strike)x 12.00 = 48.00 B 9'4"=9.33 x 16.95 = 158.14 Glass Stop 59'x 2.86 = 168.74 E and F 20'10"=20.834 x 26.86 = 559.60 MW Anchors Extra 6'x 2.00 = 12.00 Single Door (3 hinges) x 12.00 = 36.00 Saw Butt Cuts (9) x 10.00 = 90.00 Glass stop 59' x 2.86 = 168.74 Frame Bundle Charge (1) x 4.00 = 4.00 MW Anchors (6) x 2.00 = 12.00 TOTAL 1466.78 Saw Butt Cuts (7) x 10.00 = 70.00 Frame bundle charge (1) x 4.00 = 4.00 TOTAL 1501.48 23 Welded Assemblies CCW Flush Stick Prices May, 2018

DESCRIPTION CODE PRICE NOTE: Weld prices include shipping spreader bars welded in place .

Glass stops will be attached to window elevations cut to length and pushed tight to the 1-15/16" rabbet with one screw when indicated on the elevation . Price glass stop separately, this installation is no charge . Additional screws are furnished separately . 5/8 x 5/8 glass stop standard unless indicated otherwise .

Glass stops "set" in place with spacing for glazing as specified on frame elevation for an additional $9.00 list per foot installed when indicated on each elevation ordered . Customer must note which rabbet and pocket size . 5/8 x 5/8 glass stop standard unless indicated otherwise .

Frames will be manufactured standard unequal rabbet unless complete section details accompany each elevation .

Indicate weld code per joint on all welded frame elevations .

Continuous welds are not water tight . Exterior windows must be properly glazed with joints sealed at installation by the glazing contractor .

CURRIES' reserves the option to face weld or back weld seams and finish face imperfections . Face welds over 4" will be intermittent welded to prevent distortion .

Stainless Steel frames are not available in all welded corner configurations . Please consult the factory on stainless steel welded frame corners .

PER CORNER Seam Weld Die Miter (KD) SW 33 (Factory Weld Discount)

PER CORNER Full Weld Die Miter (KD) FW 58 (Factory Weld Discount) 24 Welded Assemblies CCW Flush Stick Prices May, 2018

DESCRIPTION CODE PRICE

PER CORNER Saw Miter - Continuous Weld 64 (Factory Weld Discount) + SMW + 2 S.M.O. Cuts @ 26 (Factory Material Discount)

Saw miter - Continuous Weld 2" face jamb to PER CORNER 64 4" face head (Factory Weld Discount) SMW + + 26 2 S.M.O. Cuts @ (Factory Material Discount)

Saw Miter - Weld Seam Tackweld Rabbet & PER CORNER 55 Soffit (Factory Weld Discount) SMT + + 26 2 S.M.O. Cuts @ (Factory Material Discount)

Saw Miter - Weld Seam Tackweld Rabbet & PER CORNER Soffit 55 (Factory Weld Discount) 2" face jamb to 4" face head SMT + + 26 (Factory Material Discount) 2 S.M.O. Cuts @

Saw Butt End - Weld Seam Rabbet & Soffit PER CORNER 67 Continuous Less than 3" face (Factory Weld Discount) BEW + + 10 1 Stop Notch @ (Factory Material Discount)

Saw Butt End - Weld Seam Tackweld PER CORNER 55 Rabbet & Soffit Less than 3" face (Factory Weld Discount) BET + + 10 1 Stop Notch @ (Factory Material Discount) 25 Welded Assemblies CCW Flush Stick Prices May, 2018

DESCRIPTION CODE PRICE

Saw Butt - Weld Seam Rabbet & Soffit PER CORNER 93 Continuous Greater than 3" face (Factory Weld Discount) SBW + + 10 1 Stop Notch @ (Factory Material Discount)

Saw Butt End - Weld Seam Tackweld PER CORNER 84 Rabbet & Soffit Greater than 3" face (Factory Weld Discount) SBT + + 10 1 Stop Notch @ (Factory Material Discount)

PER CORNER Butt End - Face Weld Seam 76 (Factory Weld Discount) + BEF + 1 Stop Notch @ 10 (Factory Material Discount)

Field Splice - Weld Attaching Bracket - PER SPLICE 91 Notch to fit (Factory Weld Discount) FSP + + 10 1 Stop Notch @ (Factory Material Discount)

Weld Cap on Jamb and Finish P115 PER CAP 102

PER SPLICE Weld Splice - Continuous Weld WSP 88 (Factory Weld Discount)

REVERSE PER HEAD Double Egress Head Splice Weld 110 WLD (Factory Material Discount) 26 Closed Profile Seam Pricing CCW Flush Stick Prices May, 2018

Certain custom mullion (closed) frofiles require seam breaks during the manufacturing process on the face or rabbet. These seams will be filled at the factory before shipment at a cost of $6.00/foot per seam. Examples of profiles that will require this additional charge are listed below. This is not an inclusive list, but a representative sample.

Examples given are for 14 & 16 gauge material.

Closed Mullion - All sizes require two seams. Single Rabbet Mullion - Uf tge face (F1) is less than 1" or The charge is $6.00/foot per seam or $12.00/foot. greater than 2" or the rabbet (D1 or D2) is less than 5/8" or Both seams. greater than 6", this profile will require one seam at $6.00/foot.

D1

F1

Single Rabbet / Cased Mullion - All sizes require Double Rabbet Mullion - I fthe face (F1) is any dimension other one seam. The charge is $6.00/foot. than 2" or the rabbet (R1 or R2) is less than 2:, this profile will require one seam at $6.00/foot.

D1 D 1

F1 F2

D2 D

Double Rabbet / Cased Mullion - All sizes require one seam. The charge is $6.00/foot. i Index Quick Ship Program May, 2018

DESCRIPTION PAGE Door Quick Ship Program 1 Frame Quick Ship Program 2 Notes Quick Ship Program

May, 2018 1 Door Quick Ship Program Quick Ship Program May, 2018

GENERAL GUIDELINES

CURRIES Quick Ship Program is a 3, 5 or 10 working day program designed to fulfill your customers’ needs as quickly as possible . All orders that qualify for this program are subject to applicable Quick Ship pricing structures as set forth on your current discount schedule current discount schedule .

The Quick Ship lead time starts on the next business day after the order is received . If engineering drawings are required to be made at CURRIES the 3 day lead time will be extended. If a Quick Ship order is requested to be Pool Shipped or shipped with other goods the 3 day lead time is extended accordingly . Order must have all questions answered and all elevation drawings completed if required prior to being entered into production

SCHEDULE CHART (SIZE, GAUGE, STEEL TYPE) 607, 707, 707 Urethane, 727, 747

SIZE GAUGE STEEL TYPE Any size (1’3” min .) through 40100 14 ga . CR or RK Any size (1’3” min .) through 410100 16 ga . CR Any size (1’3” min .) through 410100 16 ga . RK Any size (1’3” min .) through 40100 18 ga . CR Any size (1’3” min .) through 4080 18 ga . RK Any size (1’3” min .) through 4080 20 ga . CR Any size (1’3” min .) through 3080 20 ga . RK E6 Doors 2868 through 3070 18 and 20 ga . RK

EXCLUSIONS FROM DOOR QUICK SHIP

Low Profile Exit Device 757 STC Doors Watertight Doors Rabbeted doors and panels FRP Doors Bi-fold doors Panels with strike preparations Behavioral Healthcare Doors 2-1/4” thick doors Radius doors & windows Prefinish (Adds an additional 749/750 RF Shielded Doors Doors over 4’10” x 10’0” week to lead times) 859 Forced Entry Bullet Resistant Pocket Pivots Factory Installed Glass Attack Resistant Doors w/Glass CURRIESTAIN 748 Lead Lined Doors Wicket Doors Storm Pro Stainless Steel Doors Doors with Steel Muntin Lite Kits Stile & Rail doors 737 Bullet Doors E6 Honeycomb Core Doors Blast Doors

Check Factory for Availability: 2P Doors

ORDERING 1. Use the standard order form 2. Mark on the order form “Quick Ship”

FREIGHT 1. All material is F .O .B ., Mason City, IA . 2. Quick Ship Doors may be held to ship with other goods .

PACKAGING No Extra Charge — Included in Door Price All doors will be either crated or palletized (with additional protection) based upon door sizes and/or quantity 2 Frame Quick Ship Program Quick Ship Program May, 2018

GENERAL GUIDELINES CURRIES Quick Ship Program is a 3, 5 or 10 working day program designed to fulfill your customers’ needs as quickly as possible . All orders that qualify for this program are subject to applicable Quick Ship pricing structures as set forth on your current discount schedule .

The Quick Ship lead time starts on the next business day after the order is received . If engineering drawings are required to be made at CURRIES the 3 day lead time will be extended . If a Quick Ship order is requested to be Pool Shipped or shipped with other goods the 3 day lead time is extended accordingly . Order must have all questions answered and all elevation drawings completed if required prior to being entered into production.

Quick Ship Frame Program availability: Standard KD or stick profile (non-welded elevations) (Equal Rabbet Allowed) Any jamb depth 3” through 14” Cold Rolled or RK (A60) steel 18, 16 or 14 gauge UL or WH Label Hardware preps listed in the price book Any anchors listed in the price book Standard grey primer

EXCLUSIONS FROM FRAME QUICK SHIP Radius face profiles (MH, 275,etc .) Bituminous Coating Bullet Resistant Frames Jamb mounted locks requiring a face Thermal Break Frames RF Shielded Frames greater than 2” Prefinished Frames STC Frames Arch tops frames 12 gauge steel Stainless steel frames Blast Frames Lead Lined frames Radius frame elevations StormPro frames Special profile frames G90 Galvanized Steel CURRIESeal

Check Factory for Availability: Thermal Break Frames

ORDERING 1 . Use the standard order form 2 . Mark on the order form “Quick Ship”

FREIGHT 1 . All material is F .O .B ., Mason City, IA . 2 . Quick Ship Frames may be held to ship with other goods .

PACKAGING 1. Cardboard Wrap — No Charge . One (1) to three (3) pieces . This wrap designed for U .P .S . shipment or with other goods shipments 2. Cardboard Box (double walled) 8” x 12” — No Charge . One or two boxes per order holding three (3) to nine (9) pieces per box 3. Pallets — No Charge . Larger orders will be palletized . 4. Wood Crating — Must be specified by your company . The costs for crating frame pieces are listed below . Contact the factory or Service Center for the cost of crating welded frames .

Frame crating charges for frame pieces with 1 to 3 pieces in the same crate: A. 3” thru 7 3/4” jamb depth 18.00 net per frame B. Over 7 3/4” thru 14” jamb depth 21.00 net per frame i Index Special Hardware Preps May, 2018

DESCRIPTION PAGE

Closers 2 Co-ordinating Device 2 Door Bottom 2 Dummy Trim 3 Exit Alarm (surface mounted) 4 Flush Bolts 4 Flush Pull, Mortise 3 Floor Closers 3 Floor Closers (Door Bevel Add) 3 Hinges 4-6 Holders 7 Interviewers 7 Light Switch 7 Locks 7-10 Locks (Deadlocks) 10 Magnetic Switch and Locks 10 Mail Slot 10 Panic Exit Devices 11 Pivots 12 Power Transfer 12 Push and Pull Reinforcement 12 Push Pull Bar Reinforcement 12 Removable Mullion Prep 12 Rescue Hardware 13 Roller Latch 13 Robe Hook Reinforcement 13 Sliding Door (Pocket) Hardware Reinforcement 13 Strikes 13-14 Surface Bolts 14 2 Non-Standard or Special Special Hardware Preps May, 2018

DOOR FRAME DOOR LIST FRAME LIST PRICE CODE NO. PRICE CODE NO. ADD ADD CLOSERS Concealed closer in frame track in door (e.g., Sargent 260) CC** 237 CC** 184 Concealed — closer in frame, surface on door CL 26 CC** 184 (e.g., Sargent 270) 0 Semi concealed — closer in frame concealed mounting in door (e.g.,LCN 330) CC** 237 CC** 184

Surface mounted 14 ga. CL 26 E10 19 12 ga. C2 30 Regular arm 12 ga. E10 24 10 ga. E10 28 7 ga. E10 44 14 ga. E11 19 Parallel arm or surface holder 12 ga. E11 24 10 ga. E11 28 7 ga. E11 44 Top jamb mounted E12 20 Corner bracket 14 ga. E13 33 Combination: E15 33 Closer/Holder/Detector Electric access hole for above *14 Double Parallel Arm 14 ga. E16 33 Full sleeve reinforcement 14 ga. E17 33 Half sleeve reinforcement 14 ga. E18 26 CO-ORDINATING DEVICE (SURFACE MOUNTED) ADVISE TYPE G24 20 2 1. Face mounted type (e.g.,Ives 469)

1 2. Soffit mounted type (e.g.,Ives 900) G23 33 DOOR BOTTOM 1 2 1. Mortise type (e.g.,Pemko 411A ) DB** 142

2. Semi mortise (e.g.,Pemko 4131) DB** 142

3. Special depth bottom channel DB** 55

DUMMY TRIM 1. Std G2 or G3 prep & reinforcing DTA N/C 2. Non std. G2 or G3 prep & DT 30 reinforcing **MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 3 Non-Standard or Special Special Hardware Preps May, 2018

FRAME DOOR DOOR LIST FRAME LIST PRICE CODE NO. PRICE ADD CODE NO. ADD

EXIT ALARM (SURFACE MOUNTED) ADVISE TYPE (E.G. SARGENT 5100/5800 SERIES)

1. No face prep door, reinforce frame (Rim Strike) EXAL 29 E8 13

2. Function prep door, reinforce frame (Rim Strike) G11** 31 E8 13

3. Label fire pin if required (Check template) 14

FLOOR CLOSERS - ADD SPECIAL BEVEL CHARGES PER HARDWARE TEMPLATE

Single acting (ANSI A 115.9)* (e.g., Rixson 20-25 type) (top CF** 398 CF** 92 and bottom prep)

Non ANSI type single acting* (top and bottom prep) CF** 398 CF** 92

Double acting (ANSI A 115.7 or .8)* (e.g., Rixson - 10, 15, 30 type) CF** 398 CF** 92 (top and bottom prep)

Non ANSI type double acting* (top and bottom prep) CF** 398 CF** 92

SPECIAL BEVELS

"D" Bevel Hinge Lock ➀ 1/8" in 2" ➁ 1/8" in 2" "D" Bevel * 335 ➀➁1/8" in 2" bevel hinge and lock rail, 1/4" radius low side hinge edge only (required for some pivot hardware) Hinge Lock "E" Bevel - ➀ 2 5/8" radius ➀➁ "E" Bevel * 537 ➁ 2 5/8" radius Bull Nose both Edges Hinge Lock "F" Bevel ➀➁➀ 2 5/8" radius "F" Bevel * 271 ➁ Square Bull Nose one Edge Hinge Lock "G" Bevel ➀➁➀ 1/8" in 2" "G" Bevel * 12 ➁ 1/8" in 2" * ADD PER DOOR CONTINUED ON NEXT PAGE

FLOOR CLOSER ALERT *THE USE OF INTERMEDIATE PIVOTS WITH FLOOR CLOSERS IS EXTRA. PRICE PIVOTS SEPARATELY FROM PIVOT SECTION. ALSO, MOST FLOOR CLOSERS REQUIRE A SPECIAL BEVEL OR RADIUS DOOR EDGE, WHICH IS NOT INCLUDED IN THESE PRICES. DOOR BEVEL PRICES FOLLOW.

**MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 4 Non-Standard or Special Special Hardware Preps May, 2018

DOOR LIST FRAME FRAME DOOR CODE PRICE CODE LIST PRICE NO. ADD NO. ADD

FLUSH BOLTS Standard ANSI 115.4 manual or automatic H1HO NC (e.g.,Ives 458-559) Per Pair H1 61 H2 40 Special self latching with/lip strike ANSI 115.4 Per Pair H1 61 H4 49 Non-ANSI manual or automatic (e.g.,Ives 457) Per Pair FB** 273 FB** 40 Required for some automatic, reinforce only- (frame no hole) H1 19 Reversible frame flush bolt strike (includes strike plate installed) H5 40 Reversible door (panel) flush bolt strike H5 44 FLUSH PULL, MORTISE One side (14 ga. reinf.) FP** 73 (7 ga. reinf.) FP** 98 Two sides (14 ga. reinf.) FP** 80 (7 ga. reinf.) FP** 107 Edge pull ** 65 NOTE: Some pulls will not fit back to back (1 3/4" door), prep must be offset on door, use one side price for each pull. HINGES 3-1/2" Hinge standard 1-3/8" door only Per Hinge 352 No Charge 352* 12 Per Hinge 353 No Charge 353* 12 1-3/8" or 1-3/4" door 4" x 4" .130 standard weight Per Hinge 403 16 403* 12 4 1/2" x 4 1/2" .134 standard weight or .180 heavy 1 3/4" door 453 + 454 No Charge 453 + 454* 12 weight: H453 + Up to 7'6" standard Per Hinge H453 + H454 No Charge 12 H454* U453 + Per Hinge U453 + U454 No Charge 12 U454* 5" x 4 1/2" standard or heavy weight: 1 3/4 door (cam * lift also) Per Hinge 416 Hinge requiring 1/4" 20 tap per hole 4 4 Double mortise hinge, standard or heavy weight hinge SDM 16 in the door edge Per Hinge HDM 16 Over mortise hinge in door, heavy weight hinge Per Hinge HOM 16 Per hinge

Non-standard ANSI size/non-template & 6" hinges

(height/hole pattern/drill - tap size) Per Hinge HG 59 HG 37 Per hinge Not Radius corner hinge preparation Not Available Available * Add to stick material Continued on next page

**MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 5 Non-Standard or Special Special Hardware Preps July, 2018

DOOR DOOR LIST FRAME FRAME LIST CODE NO. PRICE CODE NO. PRICE ADD ADD HINGES (CONTINUED) Full surface mounted continuous hinge (reinforcement only) Edge mounted door (e.g., McKinney 12 ,14, 25) G19 N/C Face mounted door (e.g., McKinney 58 Series) HGC 74 Frame reinforced Rabbet Mount HGCR 56 Face Mount HGCF 56 Full jamb width hinge reinforcing 7 gauge x 10" high 3" - 8 7/8" jamb width Per Hinge FW 30 9" - 20" jamb width Per Hinge FW 50 3/8" x 10" high 3" - 8 7/8" jamb width Per Hinge FW 73 9" - 20" jamb width Per Hinge FW 96 1/4" X 20" drill and tap Per Hinge 9 High frequency frame hinge reinforcement strap support across Per Hinge HFG 16 face, rabbet and stop 3/16" flat plate reinforcement - full height of door Per Foot 27 (inside door hinge channel) Per Foot Full 3/16" angle iron frame hinge face and rabbbet reinforcement 33 Height 12 gauge "Eliason" (Easy Swing) (full jamb width frame Frrame Add HGD 65 reinforcing 12 gauge at mounting location) Per Door Anchor hinge set (see note below) (includes intermediate 5" hinges) Prep 5" - No drill, no tap Per Set HGA** 142 FACTORY drill & tap (e.g. McKinney, TA 792) HGA** 301 HGA** WELDED FRAME 300

LOOSE PARTS 214 (e.g.,McKinney TA 793) No Charge HGA** WELDED 300 LOOSE 214 CONTINUED ON NEXT PAGE ANCHOR HINGE ALERT NOTE: FACTORY WELDED FRAMES RECEIVE PREP FULLY REINFORCED WHEN PHYSICAL SAMPLES ARE PROVIDED (DRILLED AND TAPPED). ALL KD OR CUT AND NOTCH FRAMES ARE FULLY MORTISED, REINFORCEMENTS ARE SHIPPED LOOSE AND BLANK. DOORS ARE FULLY REINFORCED. DOORS ARE DRILLED AND TAPPED ONLY WHEN PHYSICAL SAMPLE PROVIDED.

**MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 6 Non-Standard or Special Special Hardware Preps May, 2018

FRAME DOOR DOOR LIST FRAME LIST CODE PRICE CODE PRICE NO. ADD NO. ADD HINGES (CONTINUED) Pocket pivots (Pocket Hinge) (e.g., McKinney PH-3) Per Hinge PTP** 145 PTP** 85 NOTE: Most pocket hinges require a frame face larger than 2";

therefore, this preparation is not available on KD frames. Spring type hinges/Single Acting (e.g., McKinney # 1502) 4 1/2" templated standard or heavy weight Per Hinge U453 No Charge U453 12 5" templated standard or heavy weight Per Hinge 503 4 503 16 H503 4 H503 16 Non-standard size mortise (non template) 59 37 Add special door size or bevel changes Per Hinge ** ** per door per template Spring type /Double Acting (e.g.,McKinney 1001) 4-1/2" Per Hinge HGD** No Charge HGD** 19 5" Per Hinge HGD** 4 HGD** 19 Non-standard size spring type hinge Per Hinge HGD** 132 HGD** 19 Add special door size or bevel changes per door per template

Spring type trucking & bumper set - special reinforcement only

(e.g., McKinney CS1 x 35 buffer) Per Door 391 104 NOTE: Special door size or bevel may be required by the hardware

manufacturer Electric hinge preparation — hole only (e.g., McKinney ES, CC, CS, MM) Each HGE** 14 EH** 14 Hole and coverbox with knockouts Each EH** 49 Security hinge preparation/Institutional (e.g., McKinney HTB786 X HTB386 X PSF) Security stud holes only Add Per HInge HGS** 14 HGS** 14 Security stud holes with special mortar box Add Per HInge HGS** 49 1/4 x 20 Screw preparation Add Per HInge 99 SOSS invisible hinge preparation Add Per HInge HGH 185 HGH 179 Stanley Invisible Hinge (CB1989) Add Per HInge 19 19 **MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 7 Non-Standard or Special Special Hardware Preps May, 2018

DOOR LIST FRAME DOOR FRAME PRICE LIST PRICE CODE NO. CODE NO. ADD ADD

HOLDERS

Overhead concealed application (e.g.,Sargent 690/1530) NOTE: Per template CH** 227 CH** 123 Overhead stop and holder surface mounted (e.g.,Sargent 590/1540) NOTE: Per template

2'4" wide and less 14 ga. SH** 27 Over 2'4" wide 14 ga. SH** 44 SH** 19 Over 2'4" wide 12 ga. SH** 47 SH** 24 Over 2'4" wide 7 ga. SH 93 SH** 44 INTERVIEWERS (DOOR PEEP) Hole only, 1/2" or 9/16" ** 20 All other per template ** 20 Chime/knocker/viewer ** 38 LIGHT SWITCH

Cutout and cover box with knockout ** 88

LOCKS Cylindrical 1 3/8 door (ANSI A 115.2) G1 N/C E2 12 (Gov't 160 - 2 3/4 B.S.) (e.g., Sargent 6 Line) Cylindrical 1 3/8 door (ANSI A 115.2 ) (Gov't 161 - 2 3/4 B.S., 1 1/8" wide latch bolt) G2 94 E2 12 (e.g., Sargent 24 - 6 Line) Cylindrical 1 3/4 door (ANSI A 115.2 ) G1 N/C E1 12 (Gov't 160 - 2 3/4 B.S. ) E2 12 Cylindrical 1 3/4 door (ANSI A 115.2) G2 N/C E1 12 (Gov't 161 - 2 3/4 B.S. ) E2 12 Cylindrical 1-3/4 door - lever trim per template (2-3/4 B.S.) G2A** N/C E1 12 Cylindrical lever thru bolted trim-Universal lever G2B N/C E1 12 (2 3/4 B.S.) E2 12 Cylindrical - 3" - 5" knob backset 30 (Specify special backset dimension)

Mortise Gov't 86 escutcheon plate trim Edge prep - internal lock case Reinforcement - full face ANSI mortise (e.g., Sargent 7700 and 8100 Series) G3 N/C E1 12 NOTE: Some plate trim will not cover ANSI standard face preparation. Lever handle trim may also conflict. Verify before ordering or use G3A.

Mortise Gov't 86 edge prep only Blank face G3E0 N/C E1 12 Internal lock case reinforcement (e.g., Sargent 7700 and 8100 Series) CONTINUED ON NEXT PAGE **MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 8 Non-Standard or Special Special Hardware Preps May, 2018

DOOR LIST DOOR CODE FRAME FRAME LIST PRICE NO. CODE NO. PRICE ADD ADD

LOCKS (CONTINUED)

Mortise Gov't 86 - sectional trim (bevel lock edge only doors) (e.g., Sargent 7700 - 8100 Series) NOTE: The following list is a manufacturer's lock series which qualify as no charge (N/C) sectional trim preparation: e.g., Arrow - A & B Series **G3A No Charge E1 * 12 Best 30 H Series Corbin/Russwin M2200 Series Falcon M Series Schlage 9000 Series Sargent 7700, 8100 Series Yale 8000 Series.

Military lock MILL 85 e.g. Kaba Lockmaster

Mortise Gov't 86 reinforced blank face, edge only G3AEO No Charge E1 * 12

Functions requiring master ring cylinders or hotel indicators **G3A 58 E1 * 12

Reinforcement only, blank face, blank edge G3ARO No Charge E1 * 12

Mortise 1 3/8 door (ANSI 115.11 ) **G3A 33 E1 18

Uni-rigid-mono 1 3/4 door (e.g.,Corbin/Russwin UT 5200) G6 25 E1 * 12

Multipoint Lock (e.g., Sargent triad) MPL** 265 MPL** 51

Rim lock - surface mounted door and frame ** 58 ** 17

Hospital Push Pull Latch (e.g., Sargent 114/116 ) HSP** 37 HSP** 12 Special backset included - NOTE HEIGHT

Lever Trak ** 56

CONTINUED ON NEXT PAGE * Add to stick material **MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 9 Non-Standard or Special Special Hardware Preps May, 2018

FRAME DOOR LIST DOOR FRAME LIST PRICE CODE NO. CODE NO. PRICE ADD ADD LOCKS (CONTINUED) Coded access locks 30 CODE** E1 * 12 Simplex, Vingcard, Tessa-LD, Unican-ILCO, Saflok Classic

Electric raceway only 118

*Any lock preparation, for example deadlocks or panic devices, that requires an electric raceway, add raceway price to lock preparation price. 2 & 3 Point Locks (e.g., Perkinson) 2094 PERK PERK 186 NOTE: Hardware must be factory installed; Cremone bolt 712 75 Security type Jamb lock 2" face frames EJ2** 44 EJ2** 73 F.A. NS 400 Series Brinks 3526 Jamb lock 8" face frames F.A. 120 SeriesEJ8** 95 EJ8** 580 Airteq 9700 Flush mount electrical Junction Box 4" Face Only 529

Junction Box 12" Face Only 581

Jamb lock 12" face frames F.A. 51 Series EJ12** 89 EJ12** 649

Door pocket lock (surface mounting plate) 360 57 G30** E30** F.A. 60, 60K, 70, 10, 80 Door non-standard mortise lock 85 47 G35** E35** F.A. 125, 110 Door non-standard lock Strike preparation STR** 58 STR** 58

Securitron - sheer aligning Magna lock 89 89

CONTINUED ON NEXT PAGE * Add to stick material

**MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 10 Non-Standard or Special Special Hardware Preps May, 2018

FRAME DOOR LIST DOOR FRAME LIST PRICE CODE NO. CODE NO. PRICE ADD ADD LOCKS (DEADLOCKS) Tubular Gov't 181 (ANSI 115.13) 1 1/2" face hole G16 12 E4 * 12 1-1/8" wide latchbolt 1-3/4" door 1-3/8 door - 1" wide latchbolt G16 12 E4 * 12 1-3/8 deadlock door - 1-1/8" wide latch bolt ** 94 E4 * 12 Mortise Gov't 190 (ANSI 115.5) **G17 66 E3 * 12 E4 *12 Deadlock with threshold bolt **G17 136 Tubular or mortise — Non-ANSI ** 85 ** 58 If Electric Raceway required 118 Lock-deadlock combined — interconnected G25 43 ** 43 (e.g., Schlage H) MAGNETIC LOCK Full Mortise MAG** 89 MAG** 89 Reinf and holes MAG** 49 DOOR POSITION SWITCH MAGNETIC SWITCH Door position switch DP10** 88 DP10** 88 Reed switch-magnetic (e.g., Air Teq 6200) (e.g., Adtec 5003) Mechanical Actuated type (door position) F.A. 524 DP15** 28 DP15** 31 Surface frame & door Mortise door DP15** 56 DP15** 31 Concealed position switch type F.A. 523 DP20** 86 DP20** 125 Door position switch - hole only DP25** 14 (contact type) reinf. and hole DP25** 20 Hole w/elec. C box DP25** 49 Full mortise magnetic switch MAG** 89 MAG** 89 MAIL SLOT (DOOR FACE TYPE FMS) Mail slot (Door type FMS) Cut out only FMS 30 Cut out with channel FMS 71 * Add to stick material

**MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 11 Non-Standard or Special Special Hardware Preps May, 2018

FRAME DOOR LIST DOOR FRAME LIST PRICE CODE NO. CODE NO. PRICE ADD ADD PANIC EXIT DEVICES Rim type — reinforcement only (e.g.,Sargent 8800 Series) G11 31 E8 13 Surface mounted strike (pairs) Rim type — Reinforce and fully mortise for function holes (e.g., Sargent 8800 Series) **G11 31 E8 13 Surface mounted strike (pairs) Rim vertical rod — reinforcement only **G11A 63 E5 19 (e.g., Sargent 8710) 3 pt. **G11B 63 E8, E5 32 Surface mounted strike (pairs) **G11C 63 E5 19 Rim vertical rod — fully mortise for function holes (e.g., Sargent 8700) **G11A 63 E5 19 Surface mounted strike 3 pt. **G11B 63 E8, E5 32 Optional - mortise strike in frame **G11C 63 **G20 47 Label fire pin if required (check template) 14 Mortise panic exit Reinforced and fully mortise for function holes **G12 56 E1 * 12 (e.g.,Sargent 8900 Series) Reinforced only — no function holes or edge G12RO 56 Reinforced only — edge preparation only G12EO 56 Reinforced only — Non standard edge prep G14 211 Vert. Rod Exit (surface) edge prep 3 pt G14B 143 Vert. Rod Exit (surface) edge prep 2 pt G14C 89 (Sargent PP/PR 8700 Series) less bottom rod 0 Concealed vertical rod Reinforced and fully mortise for function 423 47 holes **G12A **G20 (e.g., Sargent 8600 Series) Concealed vertical surface applied stk. **G20 20 Concealed vert. rod — latch top & mortise lock less bottom rod **G12B 353 **G20 47 Concealed vert. rod — latch top only less bottom rod **G12C 353 **G20 47 CVR operated by lever **G15A 423 **G20 47 CVR & mortise deadlock operated by lever **G15B 423 **G20 47 CVR LBR operated by lever **G15C 423 **G20 47 Recessed mounted bar, latch center may be mortise lock **G13 387 E1 * 12 Recessed mounted bar latch top & bottom **G13A 387 **G20 47

Recessed mounted bar — latch top & mortise lock less bottom rod 387 12 **G13B E1 * (Sargent LP/LR 8600) Recessed mounted bar latch top only **G13C 387 **G20 47 * Add to stick material **MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 12 Non-Standard or Special Special Hardware Preps May, 2018

FRAME DOOR LIST DOOR CODE FRAME LIST PRICE NO. CODE NO. PRICE ADD ADD

Top and bottom pivot set — single acting (e.g., Rixon 117) 398 PTS** 160 Top pivot — frame only preparation PTT** 92 Top pivot — door only preparation PTT** 199 Intermediate pivot — single acting (e.g., Rixon M19) Each PTM** 108 PTM** 56 Bottom Pivot (only) PTB** 199 PTB** 68 Bottom Pivot — floor mount frame PTB** 199 (e.g., Rixon 117-1/4) Double acting pivot set (e.g., Rixon 127-3/4) PTS** 398 PTS** 160

NOTE: see "Floor Closer" also, check hardware requirements for special door bevels. Std. bevel to use with Rixson. Pivot sets are "G" bevel. Other pivot sets require "D" bevel.

POWER TRANSFER Raceway not included; frame preparation EPT** 95 EPT** 95 includes coverbox with electric knockouts If raceway required (door) RW 118 Raceway required on frame mullion RW-3 77 1/2" EMT conduit connector and cover box PUSH AND PULL REINFORCEMENT (no preparation in frame) (14 ga std) G18 28 7 gauge reinf. 80 PUSH AND PULL BAR REINFORCEMENT

(no preparation in frame ) **G18A 56

(14 ga. std) contact factory for spec. size and gauge requirements REMOVABLE MULLION PREP

Hardware mullion (e.g., Sargent 980) — reinforcement plate only G21 45

Frame soffit width 3" or greater

NOTE: Smaller jamb depth frames (soffit less than 3") require a G22** 65 filler block to receive mounting bracket screw hole pattern.

Verify hardware template with soffit width.

* Add to stick material

**MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 13 Non-Standard or Special Special Hardware Preps May, 2018

DOOR LIST FRAME DOOR FRAME PRICE LIST PRICE CODE NO. CODE NO. ADD ADD

RESCUE HARDWARE - EMERGENCY STOP Pivots and emergency stop (e.g., McKinney pivots EP5/DS6 stop) pivots-top and bottom PTS** 398.00 PTS** 160.00 Emergency stop ES** 53.00 Double lip latch strike (e.g., McKinney DL5-8) SDL** 120.00 Strikes must be ordered the same jamb depth of each frame ROLLER LATCH Non-ANSI A115.1 or 2 (Advise location) (e.g., Glynn Johnson 30/32) RL** 56.00 RL** 27.00 Door edge mount or top mount ROBE HOOK REINFORCEMENT ** 24.00 SLIDING DOOR (POCKET) HARDWARE REINFORCEMENT NOTE: Reinforce for surface mounted track hardware SLID 44 STRIKES ANSI prep hole only E1HO NC Inactive door, ANSI standard 4 7/8 E1 43 E1 * 12 ANSI standard 4-7/8 no lip E1B 43 E1B * 12 ANSI standard 4-7/8 extended lip E1* 32 4-7/8 strike 7 ga. tabs with cover box E1* 32 Non-ANSI ** 58 ** 58 ANSI Standard 2 3/4 E2 43 E2 * 12 Deadlock strike 3-1/2 no lip E3 43 E3 * 12 Deadlock strike 2-3/4 no lip E4 43 E4 * 12 ANSI standard 4 7/8 on 1 9/16 frame rabbet E1* 12 ANSI standard 4-7/8 on 1-3/8 door E1 127 CONTINUED ON NEXT PAGE * Add to stick material

**MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING 14 Non-Standard or Special Special Hardware Preps May, 2018

FRAME DOOR LIST DOOR FRAME LIST PRICE CODE NO. CODE NO. PRICE ADD ADD STRIKES (CONTINUED) Open back strike (e.g., Sargent 815) SOB** 89 Rim type — surface mount and reinforce only ** 28 ** 13 Electric strike frame (includes coverbox with knockouts) **E9 80 Raceway required on frame mullion 77 RW-3 1/2" steel flex connector and coverbox (Vertical location of electric strike will vary with hardware. Frames are prepared to match lock used on door at standard location.) Advise lock type when ordering. Electric strike door E9 80 Electric raceway (Advise routing of raceway) Add RW 118 SURFACE BOLTS

Per door SB 41

Frame - face reinforcing door side H3-A 19

Frame - stop reinforcing H3-B 19

**MAKE NOTE OF HARDWARE MANUFACTURER AND HARDWARE NUMBERS. SUPPLY TEMPLATE INFORMATION WHEN ORDERING i Index Engineered Section May, 2018

DESCRIPTION Page DOORS Astragals 1 Behavioral Healthcare Patient Room Access Doors 1 Bifold Doors 1 Caps — Flush 1 Channel — End Closure 1 CURRIStain Window Molding Options 2 Door Edge Bevels 2-3 Doors (special Width/Height) 3 Door Face Types 3-5 Door Special Width 5 Dutch Door 5 Galvanized Steel — G90 Coating 5 Glass - Factory Installed in Doors 6 Hardware Location (Special) 6 Label Fire Doors 7 Lock Rail 7 Mono Rail Preparation 7 Non Handed Door (B-Bevel) 7 Paint 7 Pocket Door 8 QC Cable 8 Rabbeted Door or Panel Edge 8 Replacement Door 8 2 1/4" (Two and one quarter inch) Thick 747 Door 8 Transom Panels Standard Loose 9 Undercut Door 10 Urethane Core, Slab Type — 707 Door 10 Vertical Stiffeners (Ribs), 18 Gauge — 747 Door 10 Vertical Stiffeners (Ribs), 16 Gauge — 747 Door 10 Vertical Stiffeners (Ribs), 14 Gauge — 747 Door 10 Wicket Door 10 Window Molding Options 11 Window Screens 12

FRAMES

Anchors 13-14 Bituminous Back-Coating 14 Cabinet Jamb Frame 14 Communicating Frame 15 Curriseal Frame 15 Custom Profiles (CCW Material Only) 15-16 Dimensions — Non Standard Profile (CCW only) 16 ii Index Engineered Section May, 2018

DESCRIPTION Page

FRAMES (continued)

Double Egress 17 Drip Cap 17 Electrolynx Frame 17 Galvanized Steel — G90 Coating 18 Grout Holes in Frame 18 Hardware Location (Special) 18 Hospital Stop (Sanitary Base) 18 Knockdown KD Jamb Miter 18 Labeled Frames 18 Lead-Lined 19 Paint — Prefinish Colors 19 Pocket Door Frame 19 Power Transfer 19 Removable Mullion Prep — Hollow Metal Mullion 19 Rough Buck Frame 20 Silencers 20 Spats Stainless Steel 20 Mercury Thermal Break Frames — 16 or 14 gauge 20 Transom Panel Preparation in Frame 20 1 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD ASTRAGALS Flat — surface applied with screws (standard) Add Per Door 65 Surface applied tack -welded Add Per Door 85 Flat Offset—Surface applied with screws 67 Surface applied tack - welded 87 Z - Type — Surface applied with screws: (standard) Blank Add Per Door 67 With Strike prep (E1) Add Per Door 110 With Flush Bolt Prep (H1) Add Per Door 128 With Strike and Flush Bolt Prep (E1/H1) Add Per Door 171 Z - Type — surface applied tack-welded Blank Add Per Door 87 With Strike Prep (E1) Add Per Door 131

With Flush Bolt Prep (H1) Add Per Door 148 With Strike and Flush Bolt Prep (E1/H1) Add Per Door 190 See Door Parts Price List for "Loose" Astragals . BEHAVIORAL HEALTHCARE PATIENT ROOM ACCESS DOORS

Price includes wicket door prep, easing of door edges, astragal on face of door, factory install continuous hinge on access door and cap on patient room door . Type 11 or type 4 (thicker glass) kits required for doors with windows .

Step Through Design Add to Base Door Standard configuration* 2402 Price Add to Base Door Custom configuration (non standard dimensions or sizes) 2849 Price BIFOLD DOORS Standard hinge preparation on both vertical edges of door . Square edges - No "Bevel" . Check hardware adaptability before ordering . Add Per Door 107 CAPS-FLUSH Steel - 1 3/8" or 1 3/4" door: Std Options

20 Ga 16 Ga . 14 Ga 12 Ga

Top or bottom installed with screws Per Cap 19 21 24 30

Top or bottom installed tack-welded Per Cap 37 39 41 47

Top or bottom installed with screws-seams filled flush Per Cap 56 57 58 66

Top or bottom installed tack-welded-seams filled flush Per Cap 73 74 75 82

CHANNEL - END CLOSURE (OPTIONAL GAUGES) Top and bottom - 14 gauge Each Cap 55 (Standard size or special size) - 12 gauge Each Cap 55 2 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD CURRISTAIN WINDOW MOLDING

TYPE 1 (3/8" POCKET) FV Add to F Door Price 298 FNV Add to F Door Price 361 HG Add to F Door Price 385 FG Add to F Door Price 543 FG2 Add to F Door Price 937 FG3 Add to F Door Price 896 FG4 Add to F Door Price 1125 2FNV Add to F Door Price 596 3FNV Add to F Door Price 892 TYPE II (5/8", 7/8", 1-1/8" POCKET) FV Add to F Door Price 441 FNV Add to F Door Price 504 HG Add to F Door Price 528 FG Add to F Door Price 683 FG2 Add to F Door Price 1223 FG3 Add to F Door Price 1678 FG4 Add to F Door Price 2144 DOOR EDGE BEVELS - SEE TECHNICAL DATA MANUAL 1/8" in 2" "A" Bevel square HINGE LOCK Add Per Door No Charge Standard Door Bevel

Square Edge Door "B" Bevel-square HINGE LOCK Add Per Door No Charge Non bevel square edges

"D" Bevel 1/8" in 2" HINGE LOCK 1/8" in 2" Add Per Door * 335

1/8" in 2" bevel hinge, 1/4" radius low side, 1/8" in 2" bevel lock rail (required for some pivot hardware)

"E" Bevel - 2 5/8" radius HINGE LOCK 2 5/8" radius Add Per Door * 537

Bull Nose both Edges

"F" Bevel - 2 5/8" radius HINGE LOCK square Add Per Door * 271

Bull Nose one Edge 3 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD DOOR EDGE BEVELS - SEE TECHNICAL DATA MANUAL (continued)

"G" Bevel - 1/8" in 2" HINGE LOCK 1/8" in 2" Add Per Door * 12

"P" Bevel Recessed 1/8" in 2" Add Per Door Included in Pocket Pivot Prep Hinge Edge HINGE LOCK

For Pocket Pivots

"Q" Bevel Recessed HINGE LOCK square Add Per Door Included in Pocket Pivot Prep Hinge Edge

For Pocket Pivots NOTE: D, E, F, and G bevels are required with some pivots, floor closers and double acting door hardware. Check hardware templates for bevel requirements. * Price adds do not include pivots, floor closer, etc . . . See Hardware Section . DOOR FACES Common sizes and locations are published in the Technical Data Manual . Non standard sizes and locations are no charge . Prices include standard rim-type window molding, type 9 standard or optional type 1, prepared to receive 1/4" glass, (3/8" pocket) only unless noted cutout only.". Please note exact cutout size required if different than CURRIES standard. Louvers are priced in door parts section . "Cutout" only 707 doors that exceed 36" in height of the cutout require surround channel reinforcing . Cutouts less than 36" in height do not require the channel unless the kit or louver manufacturer's procedure states this requirement for fire listed products . Please specify when ordering cutout only .

F Flush See Price Page FV Vision 3/8" pocket Add to F Door Price 133 (up to 50" perimeter visible glass) FV - cutout only Add to F Door Price 59 FV - cutout and Add to F Door Price 100 surround with 20 ga . channel 18 or 16 ga . channel Add to F Door Price 109 14 ga . channel Add to F Door Price 118 12 ga . channel Add to F Door Price 135 FNV Narrow vision 3/8" pocket Add to F Door Price 159 (over 50"; to 86" perimeter visible FNV - cutout only Add to F Door Price 59 glass including 6 x 54) FNV - cutout and surround with 20 ga . channel Add to F Door Price 100 (Channel surround used on label doors with windows exceeding 36” inheight or 707 doors where window is greater than 50% of area of door face) 18 or 16 ga . Channel Add to F Door Price 109 14 ga . channel Add to F Door Price 118 12 ga . channel Add to F Door Price 135 CONTINUED ON NEXT PAGE 4 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD

DOOR FACES (continued) HG Half glass 3/8" pocket Add to F Door Price 170 (over 86"; to 144" perimeter HG - cutout only Add to F Door Price 59 visible glass) HG - cutout and surround with 20 ga . channel Add to F Door Price 100 (Channel surround used on label doors with windows exceeding 36" in height or 707 doors where window is greater than 50% of area of door face) 18 or 16 ga . Channel Add to F Door Price 109 14 ga . channel Add to F Door Price 118 12 ga . channel Add to F Door Price 135 HG2 Half glass 2 lite 3/8" pocket (steel muntin) Add to F Door Price 246 HG3 Half glass 3 lite 3/8" pocket (steel muntin) Add to F Door Price 321 HG4 Half glass 4 lite 3/8" pocket (steel muntin) Add to F Door Price 394 HG6 Half glass 6 lite 3/8" pocket (steel muntin) Add to F Door Price 542 HG9 Half glass 9 lite 3/8" pocket (steel muntin) Add to F Door Price 768 FG Full Glass 3/8" pocket Add to F Door Price 241 (over 144" perimeter visible glass)

NOTE: 5 1/2” minimum stile and rail with standard rim-type window molding . Smaller stile and rail dimensions can be achieved using concealed molding - priced later in this section . Contact factory for minimum stile and rail .

FG Full Glass - cutout and surround with 20 ga . channel Add to F Door Price 159 FL Flush Louver - cutout only Add to F Door Price 59 F2L Flush 2 Louver - top and bottom - cutout only Add to F Door Price 118 NOTE: 1) Label doors with louvers (price louvers separate) require perimeter 20 ga . channel reinforcement Add to F Door Price 100 NOTE: 2) All vision-type doors - FV, FNV, HG with louver cutout Add to Vision Door Price 59 also . Full louver - cutout and surround with 20 ga . channel Add to F Door Price 159 FGL NOTE: price louvers separate Full glass 2 lite 3/8" pocket Add to F Door Price 415 FG2 (type 9 standard or optional type 1*) Full glass 3 lite 3/8" pocket Add to F Door Price 555 FG3 (type 9 standard or optional type 1*) Full glass 4 lite 3/8" pocket Add to F Door Price 696 FG4 (type 9 standard or optional type 1*) Full glass 9 lite 3/8" pocket steel muntin Add to F Door Price 862 FG9 (type 9 standard or optional type 1*) Full glass 12 lite 3/8" pocket steel muntin Add to F Door Price 1179 FG12 (type 9 standard or optional type 1*) Full glass 15 lite 3/8" pocket steel muntin Add to F Door Price 1500 FG15 (type 9 standard or optional type 1*) Full glass 18 lite 3/8" pocket steel muntin Add to F Door Price 1818 FG18 (type 9 standard or optional type 1*) FD Dutch door flush Add to F Door Price 265 * Includes 20 ga . surround channel NOTE: For dutch doors with vision lights or louvers, use the dutch door flush price and add to the appropriate face-type door price . CONTINUED ON NEXT PAGE 5 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD DOOR FACES (continued) Viewer, 1/2" or 9/16" hole only Add to F Door Price 20 FP All others prepared per template - hole only Add to F Door Price 20 Mail slot - prep only (see std . sizes) FMS Cutout only (standard) Add to F Door Price 30 Cutout with channel reinf .(upon request) Add to F Door Price 71 FRV Round vision 12" pocket (10" diameter visible) Add to F Door Price 880 FRV1 Round vision 18" pocket (16" diameter visible) Add to F Door Price 1056 FRV2 Round vision 24" pocket (22" diameter visible) Add to F Door Price 1096 FRV Cutout only - specify size Add to F Door Price 114 2FNV 2 narrow lites Add to F Door Price 319 3FNV 3 narrow lites Add to F Door Price 475 DUTCH DOOR NOTE: Labeled Dutch Door — use label door price and add Dutch Door Add 265 Flush bolt strike in Shelf H2 31 Hole only in shelf or top cap 14 1 Flush bolt in Top Leaf Edge 44 Lock Prep to Bottom Leaf 189 in Bottom Leaf or Shelf (shelf price in parts section) 116 DOORS (SPECIAL WIDTH) See each price page for oversize capabilities . No Add for Special Price the next standard size of door . Widths GALVANIZED STEEL - G90 COATING NOTE: Steel stiffened door faces with G90 may not be Add to Door Price 264 aesthetically eye pleasing - price includes epoxy primer 6 Engineered Doors Engineered Section May, 2018

GLASS - FACTORY INSTALLED

Price includes glass installed in doors with glazing tape as required . Prices below reflect glass and installation only . Price does not include cutout or lite kit . Exterior doors include cap beads on both sides . Use appropriate order code for exterior doors . Sizes other than listed must be quoted through the factory .

KERALITE® DOOR FACE TYPES .25" TEMPERED .25" FILMED WIRE KERALITE® FILMED 5/8" IGU 1" IGU LAMINATED ORDER CODES INTERIOR (FIG01) (FIG01E) * (FIG02) (FIG02E) * (FIG03) (FIG03E) * (FIG04) (FIG04E) * N/A (FIG07E) N/A (FIG08E) EXTERIOR FV 153 353 408 549 431 435 FV1 153 353 529 722 431 435 FNV 153 353 409 549 431 435 FNV1 153 353 774 1073 431 435 FNV2 153 353 989 1381 431 435 FNV3 153 353 1099 1540 431 435 FNV4 153 353 411 552 431 435 FNV5 153 353 438 594 431 435 FNV6 153 353 409 550 431 435 FNV7 153 353 556 759 431 435 FNV8 153 353 663 915 431 435 FNV9 153 353 439 594 431 435 HG 3068 195 1293 1838 2603 577 581 HG 3070 209 1369 2072 2938 623 629 FG 3068 299 1342 3708 5289 944 949 FG 3070 315 1420 3941 5623 990 994

Notes: Rectangular/square glass only Contact factory for availability of glazing not listed above All insulated/exterior glass will be installed with cap bead Fire rating limitations on glazing may limit availability on some doors FireLite® NT Standard and FireLite Plus also available - factory quote only Detail for each glass type available in Tech Manual Installed glass will not be available with 607, 737, 757, 777 or Stile and Rail series doors . Also not available on StormPro products Divided lites are not available * D & E label, exterior, and insulated glass doors will all include cap bead on both sides - Add $155 to installed glass price HARDWARE LOCATION (SPECIAL) Doors to other than CURRIES standard hardware location No Charge 7 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD LABEL FIRE DOORS U .L . - A, B, C, D Code L Add Per Door 47 U .L . - Transom panel add Code OTP Add Per Door 47 U .L . - 20 minute Code U20 Add Per Door 10 W .H .I . - A, B, C, D Code W Add Per Door 10 W .H .I . - 20 minute Code W20L Add Per Door 10 Curries Construction Label Doors or panels Code LC Add Per Door 15 NOTE: "Label" doors for further processing are available to CURRIES licensed second location manufacturers . Price standard stock door. Add closer reinforcement if required. Code FP No Charge

LOCK RAIL 12 GA . (707-747) 108 MONO RAIL PREPARATION

Advise size required, furnished with rubber gasket seal to be field fit . Add Per Leaf 306

NON-HANDED DOOR Square edges - no bevel, hinges cut through both faces . No Charge NOTE: Specify N .H . for hand, 4 1/2" hinge only . Ultima preparation for use with standard weight .134 or No Charge

heavy weight .180 hinge, 4-1/2" PAINT Steel Composite Core Stiffened 607,707 747,757,777 Pre-finish Colors 727,737 847,857 Standard Color & Finish 1-10 Doors Add Per Door 139 226 11+ Doors Add Per Door 108 190 Non-standard color or finish, or color match of existing paint sample 1-10 Doors Add Per Door 200 287 11+ Doors Add Per Door 165 251 NOTE: Standard delivery time not guaranteed due to paint curing time requirements . Extended delivery is common . (For non-standard colors - allow for extended delivery schedule contact factory) Red Oxide prime paint in lieu of standard gray prime Add Per Door 68 2 Coats Standard Gray Prime Add Per Door 68 2 Coats White Primer (for light colored top coats) Add Per Door 68 Zinc Rich Primer (heavy zinc solid content paint) Add Per Door 248 Quantity over 50 - contact factory 0 2 Component Epoxy prime paint Add Per Door 68 8 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD POCKET DOOR (SEE TECHNICAL DATA MANUAL FOR DETAILS)

Reinforce for surface mounted track hardware Add Per Door 44

Edge Pull preparation Add Per Door 65

QC CABLE (ELECROLYNX HARNESS) POWER OVER ETHERNET (PoE) AVAILABLE 1st Harness Add Per Door 118 2nd Harness Add Per Door 118 RABBETED DOOR OR PANEL EDGE (SEE TECHNICAL DATA MANUAL FOR DETAIL)

Top or bottom edge Add Per Door 329

REPLACEMENT DOOR - BLANK EDGES AND FACE - SQUARE (NO BEVELS)

Available 707 and 747 only - 1 3/4", any width, any height

3 hinge prep up to 7'6" Add Per Door 22

4 hinge prep over 7'6" and up to 10' Add Per Door 30

2" (TWO INCH) THICK DOOR - SEE 857 SERIES 2 1/4" (TWO AND ONE QUARTER INCH) THICK 747 DOOR Add to 747 Door Price 1316 WINDOW OPTIONS—Type 3 or Type 4 only for door thickness listed above 9 Engineered Doors Engineered Section January, 2019

TRANSOM PANELS STANDARD LOOSE (See Technical Manual for size and edge limitations) Transom Panels (loose)

Height of Panel

Width of Panel Example: 1/2" Thick Panel. 20 gauge steel. Width of panel is 2’1". Height of Panel is 11". Round up to the nearest foot for both Width and Height. That will give the total square feet of the Panel. Square feet of panel times price per square feet.

3 (2'1" rounded up to 3') Width X 1 (11" rounded up to 1') = 3 square feet. 3 X $34 (price per square foot for 20 gauge 1/2" panel) = $102 list.

Indicate “B” bevel panel, for use in three sided or four sided frames. Refer to Technical Manual for maximum capabilities and uses.

MINIMUM PRICE OF 3 SQUARE FEET

PANEL THICKNESS STEEL GAUGE CONSTRUCTION FIRE RATED CR PER SQ FT PRICE

3/8", 1/2”, 5/8" 3/4", 7/8", or 1" 20 Composite N/A 37 3/8”, 1/2”, 5/8” 3/4”, 7/8”, or 1” 18 Composite Yes** 38 3/8”, 1/2”, 5/8” 3/4”, 7/8”, or 1” 16 Composite Yes** 75 3/8", 1/2" 5/8” 3/4”, 7/8”, or 1” 14 Composite N/A 77 1-3/8" or 1-3/4" 20 707S Styrene N/A 60 1-3/8" or 1-3/4" 18 707S Styrene No 65 1-3/8" or 1-3/4" 16 707S Styrene No 69 1-3/8" or 1-3/4" 14 707S Styrene No 75 1-3/8" or 1-3/4" 18 707S Honey*** Yes* 65 1-3/8" or 1-3/4" 16 707S Honey*** Yes* 69 1-3/8" or 1-3/4" 14 707S Honey*** Yes* 75 1-3/4" 18 747S* Yes* 80 1-3/4" 16 747S* Yes* 85 1-3/4" 14 747S* Yes* 92

*For UL Label 1-3/4" Add 47 **For UL Label 1/2" panel only. 18 ga only if panel to be installed in a door. 18 or 16 ga if installed in a frame Add 47

Panel installation charge – welded into frame Add Per Panel Fixed= 143 Removable = 101 or installed with screws or removable

3/8" or 1/2" panel installed in normal glass Add Per Panel Fixed= 111 pocket in door window kit

Galvanneal (A60) Panel Add 75

747 Panels *Add 12 ga. Rails 108 ***Add honeycomb core 31 10 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD UNDERCUT DOOR 5/8" BOTTOM STANDARD 1-3/4" DOOR - 3/8" & 3/4" AVAILABLE No Charge all other undercuts Add Per Door 19 3/4" BOTTOM STANDARD 1-3/8" DOOR - 3/8" AVAILABLE No Charge All other undercuts Add Per Door 19 URETHANE CORE - SLAB TYPE - 707 DOOR (Label approved, UL only) Add Per Door 99 VERTICAL STIFFENERS (RIBS) 20 Gauge - 747 Door Add To 747 Door Price 48 18 Gauge - 747 Door Add To 747 Door Price 73 16 Gauge - 747 Door Add To 747 Door Price 131 14 Gauge - 747 Door Add To 747 Door Price 177 WICKET DOOR Add Per Door 1263 11 Engineered Doors Engineered Section May, 2018

WINDOW MOLDING TYPES (ADD TO FLUSH DOOR PRICE)

* POCKET SIZE * POCKET SIZE * POCKET SIZE * POCKET SIZE * POCKET SIZE 3/8" ONLY 5/8", 7/8" AND 1-1/8" 3/8", 1/2" AND 5/8" 3/8" THRU 1-1/8" 3/8", 1/2" AND 5/8" FOR 1-3/8" OR 1-3/4" DOORS FOR 1-3/4" DOORS ONLY FOR 1-3/4", 2" OR 2-1/4" DOORS FOR 1-3/4", 2" OR 2-1/4" DOORS FOR 1-3/4" DOORS, 2" DOORS FV 133 FV 164 FV 201 FV 291 FV 318 FNV 159 FNV 190 FNV 251 FNV 369 FNV 396 HG 170 HG 201 HG 274 HG 467 HG 484 FG 241 FG 272 FG 433 FG 749 FG 790 FG2 415 FG2 476 FG2 624 FG2 1010 FG2 1043 FG3 555 FG3 648 FG3 866 FG3 1444 FG3 1494 FG4 695 FG4 821 FG4 1117 FG4 1886 FG4 1951 #6 SCREW #6 SCREW #6 SCREW #6 SCREW #6 X 3/4 SCREW REFER TO CURRIES TECHNICAL DATA MANUAL FOR WINDOW LOCATION, REINF . GAUGES, SCREW PLACEMENT AND POSSIBLE HARDWARE INTERFERENCE .

* POCKET SIZE * POCKET SIZE * POCKET SIZE * POCKET SIZE

3/8" THRU 1-5/8" 3/8" ONLY FOR 1-3/4" DOORS ONLY 3/8", 1/2" AND 5/8"

FOR 1-3/4" DOORS, 2" DOORS FOR 1-3/4" DOORS ONLY 9/16", 13/16" and 1-1/16" FOR 1-3/4", 2" OR 2-1/4" DOORS FV 318 FV 133 FV 164 FV 201 FNV 396 FNV 159 FNV 190 FNV 251 HG 484 HG 170 HG 201 HG 274 FG 790 FG 241 FG 272 FG 433 FG2 1043 FG2 415 FG2 476 FG2 624 FG3 1494 FG3 555 FG3 648 FG3 866 FG4 1951 FG4 695 FG4 821 FG4 1117 #6 X 3/4 SCREW #8 SCREW #8 SCREW #6 SCREW 12 Engineered Doors Engineered Section May, 2018

UNIT LIST PRICE ADD WINDOW SCREENS For HG-type doors, aluminum screen, and perimeter frame Add To HG Door 221 to fit pocket in standard HG door . NOTE: Glass glazing is not possible when using screens, specialty and/or security screens available - contact factory . 13 Engineered Frames Engineered Section December, 2018

ANCHORS ANCHORS FOR M AND CM FRAMES (WITH KD FRAME) Six anchors standard up to 7'6" per frame Eight anchors per frame over 7'6" to 10'0" All prices listed as each CODE FRAME FACE 3 - 4 5/8 4 3/4 - 9 3/4 9 7/8 - 14 Profile MP 2" only NA Std NA M or CM Loose AMP 2" only 33NA M or CM Loose M ALL Std Std Std M only Loose MW ALL Std Std Std 12" max. M or CM Loose SC* ALL Std Std Std M or CM Loose WS ALL 111M only Loose WML ALL 4 4 4 M or CM Welded WSC ALL 2 2 2 M or CM Welded WWS ALL 3 3 3 M or CM Welded WESC ALL 2 2 2 M or CM Welded

* 5-3/4 SC/Steel Channel is no charge for 2" face frame only (PO149).

ANCHORS - LOOSE Standard jamb anchors are included in the KD frame MP Each 2.00 SC Each 2.00 price for M-series and CM-series frames. AMP Each 5.00 WS Each 3.00 These standard anchors are MW/Masonry wire, M Each 2.00 ML Each 4.00 M/Masonry T, SC/Steel channel, and MW Each 2.00 MP/multi-purpose type anchors.

ANCHORS - WELDED IN ML/ Masonry label, SC/Steel channel, WS/ Wood stud anchors are available welded in place by prefixing the anchor code with a W. The cost of the welding must be added to the KD frame price. Welding = 2.00 Each Standard loose anchor price is included in these per jamb price. SC WS ML 3 per jamb Add per jamb for welded anchors 6.00 9.00 12.00 4 per jamb Add per jamb for welded anchors 8.00 12.00 16.00

6 per frame Add per jamb for welded anchors 12.00 18.00 24.00 8 per frame Add per jamb for welded anchors 16.00 24.00 32.00

All KD Double Egress (DEM), and single rabbet G and CG profile KD frames are supplied with loose anchors as specified, included in the base price or welded in for $2.00 extra per anchor, except existing wall type anchors that are priced separately. Add per anchor $.2.00

CONTACT FACTORY FOR OTHER TYPES OF ANCHORS TO BE WELDED IN. CONTINUED ON NEXT PAGE 14 Engineered Frames Engineered Section May, 2018

UNIT LIST PRICE ADD ANCHORS (CONTINUED) EXISTING WALL TYPE ANCHORS FOR M AND CM FRAMES EWA/existing wall type anchor, SB/Spacing bracket anchor, and PS/pipe spacer anchors Available for M and CM series frames Chart below based on these prices EWA Anchors 3.00 ea. loose PS Anchors 4.00 ea. loose SB Anchors 2.00 ea. loose (Holes required to install 1/4" or 3/8" bolt in frame stop-Specify bolt size) Welding in per anchor, add to the anchor cost Bolts with expansion shield (Specify bolt size)

HOLES, ANCHORS, 1/4" OR 3/8" HOLES ONLY HOLES AND ANCHORS 1/4" OR 3/8" BOLTS ONLY BOLTS

ANCHOR/QUANTITY 6 8 10 6 8 10 6 8 10 6 8 10

LOOSE EWA 1/4" or 3/8" * 18 .00 24 .00 30 .00 36 .00 48 .00 60 .00 84 .00 112.00 140 .00 48 .00 64 .00 80 .00 PS 1/4" or 3/8" 18 .00 24 .00 30 .00 42 .00 56 .00 70 .00 90 .00 120.00 150 .00 48 .00 64 .00 80 .00 SB 1/4" or 3/8" 18 .00 24 .00 30 .00 30 .00 40 .00 50 .00 78 .00 104 .00 130 .00 48 .00 64 .00 80 .00 WELDED WEWA 1/4" or 3/8" N/A N/A N/A 60 .00 80 .00 100 .00 108 .00 144 .00 180 .00 48 .00 64 .00 80 .00 WPS 1/4" or 3/8" N/A N/A N/A 66 .00 88 .00 110 .00 114 .00 154 .00 190 .00 48 .00 64 .00 80 .00 WSB 1/4" or 3/8" N/A N/A N/A 54 .00 72 .00 90 .00 102 .00 136 .00 170 .00 48 .00 64 .00 80 .00

* EWA - 2" face maximum, and 8 3/4" jamb depth maximum . PS anchors must be used on larger face dimensions and jamb depths. Specify bolt length 4" or 6", and quantity per frame, if bolts are required. 6 or 8 anchors standard up to 7'6" frame height . Over 7'6" to 10'0" receive 10 anchors.

C FRAME ANCHORS - Drywall frames include one compression bar anchor per jamb located near the top, and punch and dimple base anchor preparations on each face at the bottom . An optional welded in strap type anchor is available at no charge, when specifying OB/optional base anchor in the anchor column.

C.C.W. MATERIAL - Open section profile stick prices do not include anchors . Loose or weld in type anchors can be estimated from tables on the preceding page.

Closed mullion section prices, prepared for hinge or strike, include a mullion stirrup anchor loose for the bottom.

BITUMINOUS BACK-COATING 3-Sided Frames Add Per Frame 108 Individual Frame Pieces - Open Profile Add Per Frame Piece 36 Individual Frame Pieces-Closed Profile (Mullion) Add Per Frame Piece 52 CABINET JAMB FRAME Cabinet jamb frame (see Technical Data Manual for details) Price door frame from CCW material . Add perimeter footage of buck being used . 16 Gauge Buck Add Per Lineal Foot 20 14 Gauge Buck Add Per Lineal Foot 25 12 Gauge Buck Add Per Lineal Foot 33 Add for Welded 3 Sided Frame 164 NOTE: Available saw mitre only (S.M.O.) jambs and heads or saw mitre welded (S.M.W.) jambs and heads . Bucks furnished loose to dimensions of rough opening specified 15 Engineered Frames Engineered Section May, 2018

UNIT LIST PRICE ADD COMMUNICATING FRAME

See Technical Data Manual for profiles

(Standard KD profile only) Add Per Frame No Charge

CURRISEAL FRAME Integral kerf frame to receive gasket for air infiltration, smoke and draft control, and weather seal . The gasket sets are Architectural bronze color only and must be priced separately below . Add per frame plus the gasket set listed below 90

CCW lengths per kerf per foot 9

GASKET SETS STOCK NUMBER SIZE MS004028 3072 33 MS004036 4080 39 MS004044 6072 39 MS004051 8072 42 MS004069 6080 42 MS004077 10' length 50 pcs 799 MS007070 10' length 1 pc 18 NOTE: Communicating frames require two sets of gaskets Double the Frame Add CUSTOM PROFILES (CCW MATERIAL ONLY) SAW MITRE ONLY

Cut to length, butt end, notched, or saw mitre only - available in most jamb depths, faces, stop height, and gauges as shown below . (See Technical Data Manual for limitations on each profile . Contact factory for availability and on label capabilities) .

Profile A (Plaster Return) Add Per Frame Component 19 Profile B (Nailing Flange) Add Per Frame Component 19 CONTINUED ON NEXT PAGE 16 Engineered Frames Engineered Section May, 2018

UNIT LIST PRICE ADD CUSTOM PROFILES (Continued) - CCW material only (SAW MITRE ONLY)

Profile 275 and 355 Add Per Frame Component 70

NOTE: Available 16 gauge only, 3F only * Jamb Depth

Price as 4” face CCW 23 Add Per Frame Component 70

Profile H Add Per Frame Component 49 (Radius Face) NOTE: Available 16 gauge only, 3F only

Profile I Add Per Frame Component 19 (Flush Hemmed Face Edge) NOTE: Available 18, 16, and 14 gauge only Profile L Add Per Frame Component 19 (Shadow Box, Flush Face)

DIMENSIONS - NON STANDARD PROFILE (CCW only. For KD pricing see frame section) - DOES NOT APPLY TO 12 GA., THERMAL BREAK, OR STAINLESS STEEL

1) Non standard stop height 3/4", 1", or 1 1/4" Add Per Frame Component 15% 2) Non standard rabbet dimension Add Per Frame Component 15% 3) Non standard face dimension (less than 2") Add Per Frame Component 15% (1", 1 1/4", 1 1/2", 1 3/4" are standard) 4) For face dimension larger than standard Add Per Frame Component (e .g ., 2" face up to 4" face add 25% to 2" price 25% 4" face up to 8" add 25% to 4" price 8" face up to 16" add 25% to 8" price 5) Non standard returns (backbend) Add Per Frame Component NOTE: standard return is 1/2" - except 5 3/4 has 7/16" return, all M series . 1/2" is the minimum return on 15% 12 gauge material 6) Drywall return (backbend) Add Per Foot - Both Returns $ 0.80 Add Per Foot - One Return $ 0.40 17 Engineered Frames Engineered Section July, 2018

UNIT LIST PRICE ADD DOUBLE EGRESS Knocked down KD - M series 4 3/4" thru 14", 1/8" increments, 16 or 14 gauge steel . Price standard W .H .I . or U .L . frames or parts as follows: Add Per Hinge Jamb 102 Add Per Splice/Welded, Head 210 Add Per Complete Frame 414 NOTE: Vertical Rod devices required for fire label openings .

CCW stick length - Double egress hinge jambs Add Per Foot 18

CCW stick length - double egress, single rabbet head Add Per Foot 18

CCW stick length - double egress double rabbet head Add Per Foot 18

(Add cut and notch charges and weld charges as required) DRIP CAP Installed per frame — welded frames only 38

Drip Cap 10'6-5/8" – painted 16 ga . Loose - priced per foot 4 ELECTROLYNX FRAME OPTIONS AND LIST PRICING Electric Hinge - ElectroLynx Cables (Loose) MA1951 LX1 Code-List 118 Electric Hinge - ElectroLynx Cables (Loose) with PoE List 118 NOTE: Some Electrified Exit Devices will require two electric hinges . An example of this application is the SARGENT 12-55-8875 Exit Device . Door hardware specifications should be provided with the frame order for verification of this requirement .

Neither cable will fit our raceway . Raceway is intended for pulling nonjacketed Individual conductors." 18 Engineered Frames Engineered Section May, 2018

UNIT LIST PRICE ADD GALVANIZED STEEL - G90 COATING Add to 3F KD Frame 60 Add Per KD Frame Piece Each 20 CCW - price per foot 4 GROUT HOLES IN FRAME 1 3/8” hole for grouting (backfill) installed frame Each 16 Foam Grout Guard Each 13 HARDWARE LOCATION (Special) Frame to other than CURRIES standard hardware location . No Charge HOSPITAL STOP (Sanitary Base) Specify Height 45°cut above finish floor is standard — 90° cut available at the same price . Factory fabricated and finished Add Per Frame 142 Factory fabricated and finished Add Per Jamb 71 NOTE: W.H.I./U.L. frames with hospital stops must be factory finish or done by 50 frames or more - contact W.H.I./U.L. second location license shop . 6" maximum height on factory for pricing. W.H.I./U.L. frames .

KNOCKDOWN - KD JAMB MITER Additional jamb miter for KD borrow lite or Add Per KD Jamb 13 four sided frames Used in perimeter pricing LABELED FRAMES U.L. FRAMES - METAL LABEL KD hinge jamb Code L 17 KD per single frame Code L 17 KD per double frame (pairs require additional positive latch in Code L 34 head) KD or welded borrowed lite Code L 17 20 min . KD per hinge jamb Code 20 17

W.H.I. FRAMES KD hinge jamb embossed label (no hourly rating or 1 1/2 hr) Code W No Charge KD hinge jamb - metal label with rating 3 Hr . Code W-180 17 1 1/2 hr Code W-90 17 1 hr Code W-60 17 3/4 hr Code W-45 17 20 min . Code W-20 17 CURRIES Construction Label KD Frames Code CON 17 Add to Hinge Jamb 19 Engineered Frames Engineered Section May, 2018

UNIT LIST PRICE ADD LEAD LINED FRAME PREPARATION

Lead retaining clips installed per frame (20 std . per frame) Add Per Clip 6

Lead retaining clips installed per frame member Add Per Clip 6

(8 per jamb member and 4 per head) PAINT - PREFINISH COLORS KD Frames Standard Custom 1-30 Pieces Add Per Piece 39 55 31+ Pieces Add Per Piece 29 44 Welded Frames 1-30 Pieces Add Per Piece 48 67 31+ Pieces Add Per Piece 35 53 Each welded order will be shipped with a gallon of touch-up paint. Add to each order. Not included 198 198 in above pricing. All welded prefinish frames will be crated . Up to five 3-sided frames in a crate (maximum 6’0” x 7’0” frames) Add Per Crate 116 All 3-sided frames above 6’0” x 7’0” and other elevations will ship one frame per crate . NOTE: (Non standard colors, allow for extended delivery schedule contact factory.) Red Oxide Prime Paint, in lieu of standard gray prime Add Per Piece 26 2 Coats Standard Gray Prime Add Per Piece 26 Zinc Rich Prime (heavy zinc solid content paint) Add Per Piece 26 2 Coats white primer (for light colored topcoats) Add Per Piece 26 POCKET DOOR FRAME See Technical Data Manual for details NOTE: Available saw mitred only (S .M .O .) or saw mitre welded (S .M .W .) Price as CCW material per lineal perimeter foot of plain rail (CCW21) and add Per Perimeter Foot 24 * Glass stop for head rail (CCW 177 PM) 5/8” x 5/8” Add Per Foot 6.87 POWER TRANSFER - MULLION PREP 1/2" Steel conduit and connector, and cover box (RW-3) Add Per Mullion 78 REMOVABLE MULLION PREP - HOLLOW METAL MULLION Vertical or horizontal mounting Preparation includes: 2 removable mullion bracket anchors, 65 and both ends of mullion notched Price mullion separately Notches in adjoining frame sections Add Per Mullion 10 (See Technical Data Manual for details) 20 Engineered Frames Engineered Section October, 2018

UNIT LIST PRICE ADD ROUGH BUCK FRAME Rough Buck Frame (See Technical Data Manual for details) NOTE: Available saw butt end (S.B.E.) only W.H.I./U.L. Rough Buck Frame NOTE: Available Saw Butt End (S.B.E.) only. Price rough buck frame. Add for Label Per Hinge Jamb U.L. Metal 17 (not including sub buck) WHI Metal 17 Price door frame from CCW material. Add perimeter footage of buck being used. 16 gauge Buck Add Per Lineal Foot 16 14 gauge Buck Add Per Lineal Foot 24 12 gauge Buck Add Per Lineal Foot 27 SILENCERS

All frames, strike jambs, and double heads may be ordered punched for silencers at no charge when indicated on the frame order form. Hole punching is three per single frame or strike jamb and two per double frame or double opening head. Silencers are not furnished Refer to "Frame Parts" and must be ordered separately from the Frame Parts Section of this catalog. Frames, strike jambs and double heads may also be section for pricing silencers. ordered blank for use with adhesive silencers or weather strip. All Service Center inventory frames are punched for silencers.

SPATS STAINLESS STEEL Slip in sleeve type (See Technical Data Manual for details) Applied - cased opening - Hospital stop Add Per Spat 184 Applied - full profile (rabbet and stop) Add Per Spat 242 Loose - See Parts Section 4" - 8" max. MERCURY THERMAL BREAK FRAMES - 16 GAUGE OR 14 GAUGE - MANUFACTURED OFFSITE AND SHIPS SEPARATELY Must be RK (A60) steel KD M or G type only Add to KD Galvanneal Frame Price 537 FW Welded Mercury frames are face and rabbet welded only (soffit is not welded) CCW Pricing Thermal Break - 16 gauge or 14 gauge Must be RK (A60) steel Add to Galvanneal Open sections 33 Foot Price Add to Galvanneal Closed sections 51 Foot Price TQU, TRU Stucco frame profile Add to 3F Mercury frame price 66 3-7/8" minimum depth TRANSOM PANEL PREPARATION IN FRAME Prep for transom panel with springbolts Per frame 107 Prep for removable transom panel Single opening 107 Prep for removable transom panel Paired opening 116 i Index Parts May, 2018

DESCRIPTION PAGE

DOOR PARTS Astragal 1 Cylindrical Lock Cover Plate 1 Dutch Door Shelf 1 End Channel 1 Glass - Lite Kits Stock Item - Type 9 2 Standard Size Available - Type 9 2 Non Standard Sizes Made to Order - Type 9 2 Non Standard Sizes Made to Order - Type 10 3 Standard Size Available - Type 1 3 Non Standard Sizes Made to Order - Type 1 4 Non Standard Sizes Made to Order - Type 2 4 Glass Muntin Bar 5 Hardware Reinforcements 5 Hinge Filler Plates 5 Lock and Flush Bolt Filler Plates 5 Louvers Stock Item 6 Special Sizes 6 Stock Item 6 Molding Stick Molding Parts - Type 9 and 10 6 Glass Molding Parts - Type 1 and 2 7 Top and Bottom Caps — Steel 7 Window Cut-out Channel Reinforcing 7

FRAME PARTS Closer Reinforcement 8 Coordinator Reinforcement 8 Continuous Drip Cap 8 Continuous Header Reinforcement 8 Corner Clip Reinforcements 8 Corner Return Filler 9 Door Silencer 9 Flush Bolt Reinforcement 9 Hinge Filler Plates 9 Hinge Shims 9 Hinge Reinforcements 9 Lead Lined Frames 10 Lock Strike/Filler Plates 10 Lock Strike Reinforcements 10 Mud Cover Hinge or Strike Reinforcement 10 Panic Exit Device Reinforcement 10 Splicing Reinforcements 10 Spats — Stainless Steel 11 Spreader Bar Reinforcement Channel 11 Stop Filler Head 11 Throat Filler 11 ii Index Parts May, 2018

DESCRIPTION PAGE

FRAME PARTS (continued) "C" Drywall Frames Cased Opening — Compression Anchor 12 Drywall Frames — Compression Anchor 12 Adjustable Multi-Purpose Anchor 12 Multi-Purpose — Slip - In 12

"M" Masonry Frames Adjustable Ceiling Strut 13 Double Egress (2) Piece Foot Clip 13 Steel Stud, Channel Type, Slip-In 13 Steel Stud, Channel Type, Weld-In 13 Wood Stud, Slip-In 13 Wood Stud, Weld-In 13 EWA Anchor 13 Existing Opening Spacing Bracket 14 3/8" Diameter, Pipe Spacer Only 14 Concealed with Plastic Cap 14 Foot Clip, Standard 14 Foot Clip, Adjustable 14 Masonry "T" 14 Multi-Purpose — Slip-In 14 Removable Mullion Bracket 14 Spline Anchor 15 Steel Stud Channel Type, Slip-In 15 Stirrup Anchors Mullion 15 Weld-In — Masonry 15 Wire Masonry Anchor 16 Wood Stud Slip-In 16 Weld-In 16

MISCELLANEOUS PARTS Bituminous Back-Coating 17 Dies — Frame Cutouts 17 Primer (Field Touch-ups) 17 Punch Sets for Roper Whitney Hand Press 17 Screws and Bolts 18 Touch-Up Paint (Pre-finished Colors) 18 iii Index Parts May, 2018

DESCRIPTION PAGE TEMPLATES

Door Hardware Cut-Out Templates Hinge Drill Fixture 19 Latch Bolt 19 Latch Front 19 Dead Lock Strike 19 Mortise Strike 19 Cylinder Lock Strike 19

Frame Hardware Cut-Out Templates Hinge 20 Mortise Strike 20 Cylinder Lock Strike 20 Strike 20 Notes Parts May, 2018 1 Door Parts Parts May, 2018

LIST PART NO. PRICE ASTRAGALS (Specify Height & Hand) Flat (1-1/2" x 12 gauge) F1 42 Flat Offset part #163 44 Z, Blank Z1 44 Z, ANSI 4-7/8" Strike Preparation Z1E1 86 Z, Blank Strike, ANSI Flush Bolt Preparation Z1H1 104 Z, ANSI 4-7/8" Strike, ANSI Flush Bolt Preparation Z1E1H1 147 Z, ANSI 4-7/8" Strike, ANSI Flush Bolt Preparation, Non-Beveled Z1E1H1NB 147 Z, ANSI 4-7/8" Strike, Non-Beveled Z1E1NB 86 CYLINDRICAL LOCK COVER PLATE/FILLER

Cylindrical lock cover plate - ANSI 115 .2 & 3 CD000182 17

Cylindrical lock filler - #161 Lock, Face Punchout CD000262 3

DUTCH DOOR SHELF - 16 GAUGE (Specify Door Width & Door Thickness) 2'0" through 4'0" - single shelf (one side) 8" wide shelf SHF1 265 2'-0" through 4'0" Double Shelf (both sides) 8" wide shelf SHL2 369 2'0" throgh 4'0" single sheet (one side) greater than 8" wide SHFD 334 2'0" through 4'0" double shelf (both sides) greater than 8" wide SHFD 443

RK Add Per Shelf 75 *Use part no . for all widths - specify shelf width if other than 8" standard required . END CHANNEL Top Channel–2' min . - 4' max . 24 EC01T* (Specify Door Width & Door Thickness) 8'-0" Lengths 44 EC02B* Bottom Channel–2' min . - 4' max . (Specify Door *Use Part No . 24 Width & Door Thickness) for all widths as indicated . 2 Door Parts Parts January, 2019

PART NO. LIST PRICE GLASS - LITE KITS TYPE 9 (STANDARD KIT) STANDARD SIZES AVAILABLE (Preassembled & Prime Painted, screws included, 1-3/4" door only — 1/4" thick glass, 3/8" pocket) FV 10 x 10 WN1ASST 80 FV1 12 x 12 WN1ASST 80 FNV 6 x 16 WN2ASST 103 FNV1 6 x 36 WN2ASST 103 FNV2 6 x 48 WN2ASST 103 FNV3 6 x 54 WN2ASST 103 FNV4 3 x 33 WN2ASST 103 FNV5 4 x 24 WN2ASST 103 FNV6 5 x 20 WN2ASST 103 FNV7 6 x 24 WN2ASST 103 FNV8 6 X 30 WN2ASST 103 FNV9 4 X 25 WN2ASST 103 HG 23-5/16 x 27-1/4" (3068 door) WN3ASST 146 HG 23-5/16 x 31-1/4" (3070 door) WN3ASST 146 HG 23-5/16 x 33-1/4" (3072 door) WN3ASST 146 FG 23-5/16 x 59-3/8" (3068 door) WN4ASST 217 FG 23-5/16 x 63-3/8" (3070 door) WN4ASST 217 FG 23-5/16 x 65-3/8" (3072 door) WN4ASST 217 GLASS - LITE KITS TYPE 9 (STANDARD KIT) NON STANDARD SIZES MADE TO ORDER (Preassemble & Prime Painted, screws included, 1-3/4” only - 1/4” glass, 3/8” pocket FV Specify "visible" width x height WN6ASSP FNV Specify "visible" width x height WN7ASSP HG Specify "visible" width x height WN8ASSP FG Specify "visible" width x height WN9ASSP Non standard visible glass size kits are priced per perimeter inch of visible glass Per Inch $2 opening. 3 Door Parts Parts January, 2019

PART NO. LIST PRICE GLASS - LITE KITS TYPE 10 (STANDARD KIT) Non standard pocket size made to order FV 10 x 10 WN1AS1S 164 FV1 12 x 12 WN1AS1S 164 FNV 6 x 16 WN2AS1S 190 FNV1 6 x 36 WN2AS1S 190 FNV2 6 x 48 WN2AS1S 190 FNV3 6 x 54 WN2AS1S 190 FNV4 3 x 33 WN2AS1S 190 FNV5 4 x 24 WN2AS1S 190 FNV6 5 x 20 WN2AS1S 190 FNV7 6 X 24 WN2AS1S 190 FNV8 6 X 30 WN2AS1S 190 FNV9 4 X 25 WN2AS1S 190 HG 23-5/16 x 27-1/4 (3068 door) WN3AS1S 201 HG 23-5/16 x 31-1/4 (3070 door) WN3AS1S 201 HG 23-5/16 x 33-1/4 (3072 door) WN3AS1S 201 FG 23-5/16 x 59-3/8 (3068 door) WN4AS1S 272 FG 23-5/16 x 63-3/8 (3070 door) WN4AS1S 272 FG 23-5/16 x 65-3/8 (3072 door) WN4AS1S 272 GLASS - LITE KITS TYPE 10 (STANDARD KIT) NON STANDARD SIZES MADE TO ORDER

(Preassemble & Prime Painted, screws included, 1-3/4” only - 1/4” glass, 3/8” pocket

FV Specify "visible" width x height WN6AS1P FNV Specify "visible" width x height WN7AS1P HG Specify "visible" width x height WN8AS1P

FG Specify "visible" width x height WN9AS1P

Non standard visible glass size kits are priced per perimeter inch of visible glass opening Per Inch 3.50 GLASS - LITE KITS TYPE 1 (OPTIONAL KIT) STANDARD SIZES AVAILABLE (Preassembled & Prime Painted, screws included, 1-3/4" door only — 1/4" thick glass, 3/8" pocket) Specify 1-3/4" or 1-3/8" door when ordering. FV 10 x 10 WN1KTST 80 FV1 12 x 12 WN1KTST 80 FNV 6 x 16 WN2KTST 103 FNV1 6 x 36 WN2KTST 103 FNV2 6 x 48 WN2KTST 103 FNV3 6 x 54 WN2KTST 103 FNV4 3 x 33 WN2KTST 103 FNV5 4 x 24 WN2KTST 103 FNV6 5 x 20 WN2KTST 103 FNV7 6 X 24 WN2KTST 103 FNV8 6 X 30 WN2KTST 103 FNV9 4 X 25 WN2KTST 103 HG 23-13/16 x 28 (3068 door) WN3KTST 146 HG 23-13/16 x 32 (3070 door) WN3KTST 146 HG 23-13/16 x 34 (3072 door) WN3KTST 146 FG 23-13/16 x 60-1/8 (3068 door) WN4KTST 217 FG 23-13/16 x 64-1/8 (3070 door) WN4KTST 217 FG 23-13/16 x 66-1/8 (3072 door) WN4KTST 217 4 Door Parts Parts January, 2019

PART NO. LIST PRICE

GLASS - LITE KITS TYPE 1 (OPTIONAL KIT) NON STANDARD SIZES MADE TO ORDER (Preassemble & Prime Painted, screws included) Specify 1-3/8" or 1-3/4" door when ordering — 1/4" glass , 3/8" pocket FV Specify "visible" width x height WN6KTSP FNV Specify "visible" width x height WN7KTSP HG Specify "visible" width x height WN8KTSP FG Specify "visible" width x height WN9KTSP

Non standard visible glass size kits are priced per perimeter inch of visible glass opening. Per Inch 2 GLASS - LITE KITS TYPE 2 (OPTIONAL KIT) Non standard pocket size made to order, 1-3/4" only FV 10 x 10 WN1KT1S 164 FV1 12 x 12 WN1KT1S 164 FNV 6 x 16 WN2KT1S 190 FNV1 6 x 36 WN2KT1S 190 FNV2 6 x 48 WN2KT1S 190 FNV3 6 x 54 WN2KT1S 190 FNV4 3 x 33 WN2KT1S 190 FNV5 4 x 24 WN2KT1S 190 FNV6 5 x 20 WN2KT1S 190 FNV7 6 x 24 WN2KT1S 190 FNV8 6 X 30 WN2KT1S 190 FNV9 4 X 25 WN2KT1S 190 HG 23-13/16 x 28 (3068 door) WN3KT1S 201 HG 23-13/16 x 32 (3070 door) WN3KT1S 201 HG 23-13/16 x 34 (3072 door) WN3KT1S 201 FG 23-13/16 x 60-1/8 (3068 door) WN4KT1S 272 FG 23-13/16 x 64-1/8 (3070 door) WN4KT1S 272 FG 23-13/16 x 66-1/8 (3072 door) WN4KT1S 272 GLASS - LITE KITS TYPE 2 (STANDARD KIT) NON STANDARD SIZES MADE TO ORDER (Preassemble & Prime Painted, screws included, 1-3/4” only FV Specify "visible" width x height WN6KT1P FNV Specify "visible" width x height WN7KT1P HG Specify "visible" width x height WN8KT1P FG Specify "visible" width x height WN9KT1P Non standard visible glass size kits are priced per perimeter inch of visible Per Inch 3.5 glass opening 5 Door Parts Parts May, 2018

PART NO. LIST PRICE GLASS MUNTIN BAR - FOR TYPE 9 STANDARD OR TYPE 1 OPTIONAL KITS Steel Muntin (10'6" Long) - 1/4" glass only primed CD002402 98 This product is not listed for use in fire doors . HARDWARE REINFORCEMENTS Astragal Flush-Bolt Tab, .036 Offset, 8-32 Tap DE0032 5 Astragal Strike Tab, .036 Offset, 12-24 Tap DE0031 5 Flush-Bolt Guide Reinforcement — top or bottom, 8-32 DE0024 9 Door Flush-Bolt Tab, No offset, 8-32 Tap DE0025 5 Mortise Deadlock Tab, No Offset, 10-24 Tap DE0014 5 Mortise Lock Tab, .100 Offset, 12-24 Tap DE0007 5 Door Strike Tab, No Offset, 12-24 Tap DE0022 5 Strike Tab, No Offset, 8-32 Tap DE0023 5 4-1/2" Hinge Reinforced Plate, 1-1/4 x 10 x 7 gauge Flat DH0006 9 5" Hinge Reinforced Plate, 1-1/4 x 10 x 7 gauge Flat DH0007 9 1-3/4" Blank Hinge Rail 8'-0", 14 gauge DH0023 31 1-3/8" Blank Hinge Rail 8'-0", 14 gauge DH0057 31 1-3/4" Blank Lock Rail 8'-0", 14 gauge DE0062 31 1-3/8" Blank Lock Rail 8'-0", 14 gauge DE0067 31 Latch Bolt Guide, 161 Preparation CD010162 5 Latch Bolt Reinforcement Plate, 161 Preparation DE0003 11 HINGE FILLER PLATES / HINGE SHIMS 4-1/2” x 1-1/2” x .134 CD002572 13 3-1/2" x 1-1/8" x .123 CD002652 13 HINGE SHIMS 4-1/2" Hinge Ultima - non handed shim filler ( .0478 thick) CD008852 4 4-1/2" Hinge Filler Replacement Door ( .0478 thick) CD016772 4 4-1/2" Hinge Ultima - Handed Door ( .0478 thick) CD025502 4 Hinge Shim Retainer Clip CD008772 3 4-1/2" Metal Shim ( .0478 thick) CF003157 4 4-1/2" Cardboard Shim (500 qty .) MS004010 106 LOCK AND FLUSH BOLT FILLER PLATES 8" x 1-1/4" x .219 (ANSI 115 .1), 86 Lock Edge Filler CD002732 13 2-1/4" x 1-1/8" x .134 (ANSI 115 .2), 161 Lock Edge Filler CD002812 10 2-1/4" x 1" x .134 (ANSI 115 .3), 160 Lock Edge Filler CD002992 10 6-3/4" x 1" x .1875 (ANSI 115 .4), Flush Bolt Edge Filler CD003072 13 6 Door Parts Parts May, 2018

PART NO. LIST PRICE LOUVERS - STOCK ITEM (UL) FUSIBLE LINK — 1-3/4 DOORS ONLY) 12" W x 12" H (FL) Galvannealed CD004062 640 18" W x 12" H (FL2) Galvannealed CD004142 640 20" W x 12" H (FL3) Galvannealed CD004222 640 24" W x 12" H (FL 4) Galvannealed CD004302 640 24" W x 24" H Galvannealed CD004482 640 LOUVERS - SPECIAL SIZES (UL) Fusible Link LV01FL Contact Factory

(Standard Type — 2 piece Z blade) V02 Contact Factory

NOTE: Non Stock Direct Ship Louvers are priced at factory — plus freight cost, from louver factory . LOUVERS - STOCK ITEM (1 piece inverted "Y" Louver — Standard Type, 1-3/4 Doors) 12" W x 12" H (FL) Galvannealed CD005132 170 18" W x 12" H (FL2) Galvannealed CD005472 198 20" W x 12" H (FL3) Galvannealed CD005622 265 24" W x 12" H (FL4) Galvannealed CD005962 237 24" W x 18" H Galvannealed CD006042 276 24" W x 24" H Galvannealed CD006122 336 24" W x 60" H (FGL) Galvannealed CD006202 723 24" W x 64" H (FGL) Galvannealed CD006382 824 MOLDING - STICK MOLDING PARTS FOR TYPE 9 AND 10 (STANDARD KITS) (Galvannealed - Unpainted - Butt End) (Non-Punched and Non-Dimpled) Type 9 for 3/8 Pocket Long Leg Piece (95 .0" long) WM09 38 Type 10 Profile A Long leg Piece (95 .0" long) WM010A 56 Type 10 Profile B Long Leg Piece (95 .0" long) WM010B 56 Corner Clip Type 9 Long Leg Piece (3/8 Pocket) WM09C 3 Corner Clip Type 10 Long Leg Piece (9/16, 13/16, 1-1/16 Pockets) WM10C 3 UL Sub Channel Clip - Spec Door Thickness WM04 3 3/8 pockt requires a WM09 on both inside and outside pieces 9/16 pocket requires a WM10A on both inside and outside pieces 13/16 pocket requires a WM10A on one side and a WM10B on the opposite side 1-1/16 pocket requires a WM10B on both inside and outside pieces 7 Door Parts Parts May, 2018

PART NO. LIST PRICE MOLDING - GLASS MOLDING PARTS TYPE 1 AND 2 (OPTIONAL KITS) (Galvannealed - Unpainted - Butt End) 3/8 pocket Long Leg Piece (8'0" Long - Part A) fixed WM03A 38 3/8 pocket Short Leg Piece (8'0" Long - Part B) removable WM03B 38 5/8 pocket long Leg Piece (6'0" Long - Part A) fixed WM08A 56 5/8 pocket Short Leg Piece (6'0" Long - Part B) removable WM08B 56 7/8 pocket long Leg Piece (6'0" Long - Part A) fixed WM06A 56 7/8 pocket Short Leg Piece (6'0" Long - Part B) removable WM06B 56 1-1/8 pocket Long Leg Piece (6'0" Long - Part A) fixed WM07A 56 1-1/8 pocket Short Leg Piece (6'0" Long - Part B) removable WM07B 56 UL Sub Channel Clip - Spec Door Thickness WM04 3 Corner Clip WM05 3 TOP AND BOTTOM CAPS - 20 GAUGE STEEL (Specify Width of Steel Door Cap & Door Thickness) Galvanneal Cap, A60 TCO1* 16 (Note on order if to be used for 727 or 857 doors) *Use Part No . Length 8'0" for all widths as 44 indicated TOP AND BOTTOM CAPS - 24 GAUGE STEEL

See Service Snap in type Per 20 Center parts 265 inventory

WINDOW CUT-OUT CHANNEL SURROUND REINFORCING

20 gauge, 7 foot lengths DW0019 33 8 Frame Parts Parts May, 2018

PART NO. LIST PRICE CLOSER REINFORCEMENTS Full Profile Slip-In (16" long x 12 gauge) FL0009 30 (Specify Jamb Depth) Half Profile Slip-In (16" Long x 12 gauge) 1-15/16" Rabbet x 3/4" Soffit Leg FL0011 24 1-15/16" Rabbet x 1-3/8" Soffit Leg FL0010 24 1-9/16" Rabbet x 3/4" Soffit Leg FL0011 24 1-9/16" x 1-3/8" Soffit Leg FL0010 24 Strip Type Reinforcement 10" x 1-3/4" Strip, 14 gauge (regular arm) FL0857 6 16" x 1-3/4" Strip, 14 gauge FL0863 6 24" x 1-3/4" Strip, 14 gauge FL0861 9 20" x 1-1/4" Strip (Parallel Arm), 14 gauge FL0814 9 5" x 5/8" Parallel Arm Block - 1-15/16" Rabbet FL0028 9 5" x 5/8" Parallel Arm Block - 1-9/16" Rabbet FL0029 9 COORDINATOR REINFORCEMENT

1-3/8" x 15-1/2" x 12 gauge G23CR 5

1-3/8" x 10" x 12 gauge G24CR 5

CONTINUOUS DRIP CAP

Installed per frame - welded frames only 38

Drip cap 10’6-5/8" - painted 16 ga . Per Foot 4

CONTINUOUS HEADER REINFORCEMENT

Refer to Flush Stick (CCW-92) Section of the Catalog for ordering and See CCW-92 pricing information

CORNER CLIP REINFORCEMENTS 1" Face Masonry Jamb (per pair) P0031 4 1-1/4" Face Masonry Jamb (per pair) P0032 4 1-1/2" Face Masonry Jamb (per pair) P0033 4 1-3/4" Face Masonry Jamb (per pair) P0034 4 2" Face Masonry Jamb (per pair) P0035 4 4" Face Masonry Head (per pair) P0037 4 1-1/2" Face Drywall Jamb (per pair) P0017 4 1-3/4" Face Drywall Jamb (per pair) P0016 4 2" Face Drywall Jamb (per pair) P0036 4 2" Face Drywall Jamb, 14 gauge frame (per pair) P0046 4 4" Face Drywall Head, 16 gauge frame (per pair) P0071 4 4" Face Drywall Head, 14 gauge frame (per pair) P0047 4 Corner Clip, break-off tool MS004119 41 9 Frame Parts Parts May, 2018

PART NO. LIST PRICE CORNER RETURN FILLER (Specify Frame Profile, Gauge, Face & Return Dimension) P0084 4 Corner Filler (per pair) DOOR SILENCER 3M Adhesive Pkge of 1000 CF000187 159 Push-In Type #650 Pkge of 1000 CF000267 432 Push-In Type Pkge of 50 CF018007 25 Plastic Silencer Hole Plugs List Each CF000347 2 FLUSH BOLT REINFORCEMENT H1 Reinforcement only, 1-1/4" x 8" x 12 gauge H1FBR 6 (No hole, No Mortise) H3 Bolt Reinforcement, 1-3/8" x 10" x 12 gauge H3ASBR 6 H2, H4 Tab, .031 Offset, 8-32 Tap FL0033 4 H5 Non-Handed Flush Bolt, 8-32 Tap CF003727 11 HINGE FILLER PLATES / HINGE SHIMS 4-1/2" x 1-5/8" x .134 Filler CF000677 13 3-1/2" x 1-1/4" x .123 Filler CF000757 13 HINGE SHIMS 4-1/2" Hinge Shim ( .0478 thick) CF003157 4 5" Hinge Shim ( .0478 thick) CF003237 4 4-1/2" Cardboard Shim (500) MS004010 108 HINGE REINFORCEMENTS 3-1/2" x .123 x 12 gauge x .063 Offset with Mud Cover 351SCND 11 3-1/2" x .123 x 12 gauge x .063 Offset 351NCND 9 4" x .130 x 7 gauge x .065 Offset with Mud Cover 401SCND 11 4" x .130 x 7 gauge x .065 Offset 401SNCND 9 4-1/2" x .134 x 7 gauge x .075 Offset with Mud Cover 451SCND 11 4-1/2" x .134 x 7 gauge x .075 Offset 451SNCND 9 4-1/2" x .134 x 7 gauge x .060 Offset with Mud Cover 451SCND4 11 4-1/2" x .134 x 7 gauge x .060 Offset 451SNCND4 9 4-1/2" x .180 x 7 gauge x .113 Offset with Mud Cover 451HCND 11 4-1/2" x .180 x 7 gauge x .113 Offset 451HNCND 9 4-1/2" x .180 plus shim x 7 Ga . x .113 Offset with Mud Cover U451HCND 11 4-1/2" x .180 plus shim x 7 gauge x .113 Offset U451HNCND 9 5" x .146 x 7 gauge x .079 Offset with Mud Cover 501SCND 11 5" x .146 x 7 gauge x .079 Offset 501SNCND 9 5" x .190 x 7 gauge x .123 Offset with Mud Cover 501HCND 11 5" x .190 x 7 gauge x .123 Offset 501HNCND 9 Anchor Hinge — 7 gauge, 2 pieces (no drill or tap) FH0030 24 10 Frame Parts Parts May, 2018 PART NO. LIST PRICE LEAD-LINED FRAMES

Frame Clips P0109 $4

LOCK STRIKE/FILLER PLATES 4-7/8" x 1-1/4" x .093 (ANSI 115 .1 & 2) CF000837 13 2-3/4" x 1-1/8" x .062 (ANSI 115 .3) CF000917 11 2-3/4" x 1-1/8" x .093 (Fed #161) CF001097 11 2-1/4" x 15/16" x .062 (ANSI 115 .4 Flush Bolt) CF001177 11 H5 - Strike with Screws - 50 per package CF001257 339 H5 - Filler with Screws - 50 per package CF004637 194 LOCK STRKE REINFORCEMENTS E1 Universal (ANSI 115 .1 & 2), Box E1NDCBUS CF004307 9 E1 Tab, .036 Offset, 12-24 Tap E1SNDT CF124436 4 E2 Universal (ANSI 115 .3), Box E2NDCBUS CF004067 9 E3 Deadlock Tab, .060 Offset, 8-32 Tap E3SNDT CF006957 4 (ANSI 115 .5) E4 Tab (ANSI 115 .3) - Same as E3 CF006957 4 E4 Universal E4NDSCBS CF004067 9 MUD COVER FOR HINGE OR STRIKE REINFORCEMENT E1 Universal without Tap Holes (ANSI 115 .1 or 2) E1NDCBUSNT 6 3-1/2" Hinge, 20 gauge FH0002 4 4-1/2" x 5" Hinges, 20 gauge FH0005 4 Universal Cover Box 1-15/16" x 10-1/2" x 1" Deep FS0003 20 Universal Cover Box 1-7/8" x 13" x 1-7/8" Deep with knockouts FS0020 28 PANIC EXIT DEVICE REINFORCEMENT

E5 Rim Vertical Rod — 1-3/4" x 10" x 12 gauge E5VREDR 9

E8 Rim Exit — 1-1/4" x 8" x 12 gauge E8REDR 9

SPLICING REINFORCEMENTS Standard Frame (8" x 12 gauge [Sleeve]) P0155 25 Specify Jamb Depth Field Splice Bracket (3" x 12 gauge) P0156 11 Specify Jamb Depth 11 Frame Parts Parts May, 2018

PART NO. LIST PRICE SPATS - STAINLESS STEEL Hospital Type (Specify Jamb Depth) Jamb Depth, 3" through 7" (6" High) Each P0157 143 Jamb Depth, 7-1/8" through 12" (6" High) Each 184

Wrap-Around (Specify Jamb Depth) Jamb Depth, 3" through 7" (6" High) Each P0158 194 Jamb Depth 7-1/8" through 12" (6" High) Each 242 SPREADER BAR REINFORCEMENT CHANNEL

Refer to Flush Stick (CCW 111) section of the catalog for ordering and pricing See CCW 111 information .

THROAT FILLER

PVC Plastic/Self-Adhesive for Drywall Frames

50 pieces, 7'3" length Per Carton CF000427 755

STOP FILLER HEAD

D .E . G Profile P0154 6

(advise jamb depth) 12 Frame Parts Parts May, 2018

PART NO. LIST PRICE "C" DRYWALL FRAMES CASED OPENING - COMPRESSION ACHOR Compression anchor, 2" Face Jambs P0095 14

"L" Type Stiffener - required with Compression Anchor on cased opening P0093 4

(Specify Jamb Depth)

DRYWALL FRAMES - COMPRESSION ANCHOR Compression Anchor, 2" Face Jambs P0026 14 Compression Anchor, 1-1/2" - 1-3/4" Face Jambs P0018 14 Base Anchor, Weld-In Type (Specify Jamb Depth) P0087 4

ADJUSTABLE MULTIPURPOSE ANCHOR 2" Face Flush or Drywall Profile P0027 6 Jamb Depths 4-3/8" to 6-3/4" (1/8" increments)

MULTIPURPOSE - SLIP-IN (SPECIFY JAMB DEPTH) 2" Face Flush or Drywall Profile P0045 2 Jamb Depth 4-3/4" through 9 3/4" (1/8" increments) 13 Frame Parts Parts May, 2018

PART NO. LIST PRICE "M" MASONRY FRAMES ADJUSTABLE CEILING STRUT Adjustable Ceiling Strut, 1/4" x 1" x 36" Bar Each 41 Adjustable Ceiling Strut, Socket Reinforced Each 6 Adjustable Ceiling Strut, Wedges Each 3 Adjustable Ceiling Strut, Set Per Set P0159 59 (Set consists of 1 Bar, 2 Sockets, 2 Wedges)

DOUBLE EGRESS (2) PIECES FOOT CLIP

P0081 4

DOUBLE EGRESS, STEEL STUD, CHANNEL TYPE, SLIP-IN (Specify Jamb Depth and Face Dimension) P0149 3

DOUBLE EGRESS, STEEL STUD, CHANNEL TYPE, WELD-IN (Specify Jamb Depth and Face Dimension) P0053 3

Specify for jamb or head

DOUBLE EGRESS, WOOD STUD, SLIP-IN (Specify Jamb Depth, Face Dimension & Stud Size) P0152 3 (3-1/2" Stud) (3-5/8" Stud) (5-1/2" Stud) (5-5/8" Stud) DOUBLE EGRESS, WOOD STUD, WELD-IN (Specify Jamb Depth, Face Dimension & Stud Size) P0148 3 (3-1/2" Stud) Specify for (3-5/8" Stud) jamb or head (5-1/2" Stud) (5-5/8" Stud) EWA ANCHOR - SPECIFY SIZE Jamb Depth up to 5-3/4" (P0070) CF005476 3 Jamb Depth up to 8-3/4" (P0070) CF004896 3 Bolts not included . 14 Frame Parts Parts May, 2018 PART NO. LIST PRICE EXISTING OPENING SPACING BRACKET ONLY 1/2" Diameter Hole P0146 2 (Specify Jamb Dimension)

EXISTING OPENING 3/8" DIAMETER, PIPE SPACER ONLY (Specify Jamb Dimension and Face Dimension) P0044 4 Bolts not included .

EXISTING OPENING ANCHOR - CONCEALED WITH PLASTIC CAP 5-3/4" Jamb Depth 2" Face Only Quantity 100 CF004557 242 (Includes Caps, Bolt not included) Plastic Cap Plug Quantity 100 MS002600 31

FOOT CLIP, STANDARD Standard P0030 2 Variable P0171 2 Mullion P0261 2 Double Egress P0081 2 (Specify Jamb Depth and Face Dimension) FOOT CLIP, ADJUSTABLE

(Specify Jamb Dimension) P0078 9

MASONRY "T"

(Specify Jamb Depth and Face Dimension) P0069 2

REMOVABLE MULLION BRACKET

(Specify Mullion Profile, Jamb Depth and Face) P0090 18 15 Frame Parts Parts June, 2018

PART NO. LIST PRICE SPLINE ANCHOR

(Specify Jamb Depth) P0200 10

STEEL STUD, CHANNEL TYPE, SLIP-IN, FLUSH TO RETURN

(Specify Jamb Depth and Face Dimension)

Flush to Frame Return P92 2

STEEL STUD, CHANNEL TYPE, WELD-IN

1/2" recess for stud P29 2 (specify jamb depth and face dimension)

STEEL STUD, CHANNEL TYPE, WELD-IN, FLUSH TO RETURN

Flush to Frame Return 2 P405 (specify jamb depth and face dimension)

STIRRUP ANCHORS MULLION Mullion Stirrup P0089 4

(Specify Jamb Depth and Face Dimension)

WELD-IN TYPE - MASONRY

Minimum stop width 1" for Stop Height 5/8" and less . P0002 4

Minimum stop width 2-1/8" for Stop Height greater than 5/8" . 16 Frame Parts Parts May, 2018

PART NO. LIST PRICE WIRE MASONRY ANCHOR P0098 2

WOOD STUD, SLIP-IN (Specify Jamb Depth, Face Dimension & Stud Size) P0152 3 (3-1/2" Stud) (3-5/8" Stud) (5-1/2" Stud) (5-5/8" Stud)

WOOD STUD, WELD-IN (Specify Jamb Depth, Face Dimension & Stud Size) P0148 3 (3-1/2") (3-5/8") (5-1/2") (5-5/8") 17 Miscellaneous Parts Parts May, 2018

PART NO. LIST PRICE BITUMINOUS BACK-COATING Aerosol Spray Can Per Can MS112326 51 Aerosol Spray Can 12 Cans Per Case MS112409 605 5 Gallon Can Per Can MS112565 270 DIES - FRAME CUTOUTS Existing Wall Anchor Punch MS000067 570 * Hinge Cutout Die (4-1/8" Hinge Cutout) MS000075 * * Mullion Notch Die (for 5/8" High Stops) MS000083 * * E1 Universal Cutout Die (ANSI 115 .1 & 2) MS000091 *

* For use with 30 ton minimum punch press . * Factory Quote PRIMER (FIELD TOUCH-UPS) Gray Aerosol Spray Primer (Air Dry) Per Can MS002428 29 Gray Aerosol Spray Primer (AirDry) 12 Per Case MS002436 329 Water Base Primer Gallon MS004127 84 Standard Gray Primer (Air Dry) Gallon Can MS002444 100 NOTE: Paint is shipped UPS or Federal Express only .

PUNCH SETS FOR ROPER WHITNEY HAND PRESS Hole and countersink 3/8" — E .W .A . bolt MS004358 Contact Factory Hole and countersink #8 screw — Glass stop MS004176 Contact Factory Roper Whitney Hand Press MS000182 Contact Factory 18 Miscellaneous Parts Parts May, 2018

PART NO. LIST PRICE SCREWS AND BOLTS No . 8 x 1/2" Pan Head Per 100 MS002485 34 No . 10 x 2-1/2" Pan Head Per 100 MS002493 49 No . 6 — 20 x 1-1/4" Oval Head Phillips "Teks" Self-Drilling, Tapping Zinc-Plated Per 1000 MS002501 254 (Door Window Kit #1-4, std . Screw) No . 6 — 20 x 1-1/4" Oval Head Torx Security "Teks Screw", Zinc-Plated Per 100 MS004291 143 (Door Window Kit #1-4, Security Screw) #8 x 1-1/2" type AB Pin-in-head Torx security screw, oval coutersunk head, tapping screw, steel, zinc plated Each MA0886 4 for Type 9 window kit (3/8", 9/16", and 13/16" pocket) #8 X 1-1/2" Oval Head Phillips "Teks" Self-drilling, Tapping Zinc-Plated for Type 9 and 10 Window Kit Each MA0784 4 (3/8", 9/16", 13/16" pockets) #8 x 1-3/4" type AB Pin-in-head Torx security screw, oval coutersunk head, tapping screw, steel, zinc plated Each MA0887 4 for Type 10 window kit (1-1/16" pocket) #8 X 1-3/4" Oval Head Phillips "Teks" Self-Drilling, Tapping Zinc Plated Each MA0785 4 for Type 10 Window Kit (1-1/16" pocket) No . 8 — 18 x 1-1/2" Oval Head Phillips "Teks" Self-Drilling, Tapping Zinc-Plated Per (1000) MS002584 373 (Frame Glass Stop Screw) No . 8 — 32 x 5/8" Machine Screw Per (100) MS002519 30 No . 8 – 32 x 1-1/4" Oval Head Torx, self drilling Per (100) MS006569 191 Self DrillingTorx Driver (T-20 Bit) Each MS006627 33 No . 10 — 24 x 1/2" Machine Screw Per (100) MS002527 30 No . 12 — 24 Machine Screw Per (100) MS002535 30 No . 1/4 Sex Bolts Each MS002550 7 Flat-Head 3/8" x 6" Sleeved Wall Anchor Bolt Each MS002568 8 (For UL Pipe Spacer Anchor) Flat-Head 3/8" x 4" Sleeved Wall Anchor Bolt Each MS002576 8 Door Label Drive Screws Per (1000) MS000232 108 1/4 - 20 x 3/4" Flathead Torx machine screws Per (100) MS004135 133 1/4 - 20 x 1/2" Button head Torx machine screws Per (100) MS004184 116 No . 6-20 x 3/4" button pin-in-head torx black oxide screw Each MS052548 4 TOUCH-UP PAINT (PRE-FINISH COLORS) (Air Dry) Specify Color Number (Door) Per Gallon MS004002 198 (Frame) Per Gallon MS003004 198 19 Frame Parts Parts May, 2018

PART NO. LIST PRICE DOOR HARDWARE CUT-OUT TEMPLATES HINGE DRILL FIXTURE 4-1/2" Hinge Drill Fixture — Replacement Door, TD 928 — 1/4" Backset CD008932 408

4-1/2" Hinge Drill Fixture — Replacement Door, TD 943 — 3/16" Backset CD009192 408

5" Hinge Drill Fixture — Replacement Door, TD 956 — 1/4" Backset CD009272 408

LATCH BOLT 1-3/4 G2 - Latch Bolt Tab Weld Fixture CD009012 567

LATCH FRONT G1 - Gov't 160, Lock Front 1-3/8 Doors (2-1/4") CD007112 58 G2 - Gov't 161, Lock Front 1-3/8 Doors (2-1/4") CD007292 58 G2 - Gov't 161, Lock Front 1-3/4 Doors (2-1/4") CD007372 58 G3 - Mortise, Lock Front 1-3/4 Doors (8") CD007452 58 G1 - G2 Cylindrical Lock Face 1-3/8 (2-1/8" diameter) CD008442 58 G1 - G2 Cylindrical Lock Face 1-3/4 (2-1/8" diameter) CD008512 58 H1 - Flush Bolt Lock Front 1-3/8 Doors (6-3/4") CD007522 58 H1 - Flush Bolt Lock Front 1-3/4 Doors (6-3/4") CD007602 58 DEAD LOCK STRIKE E1 - Dead Lock Strike (No Lip), 1-3/8 Doors (3-1/2") CD007782 58 E3 - Dead Lock Strike (No Lip), 1-3/4 Doors (3-1/2") CD007862 58 E4 - Dead Lock Strike (No Lip), 1-3/8 Doors (2-3/4") CD007942 58 E4 - Dead Lock Strike (No Lip), 1-3/4 Doors (2-3/4") CD008022 58 MORTISE STRIKE E1 - Mortise Strike, 1-3/4 Doors (4-7/8") CD008102 58 CYLINDER LOCK STRIKE E2 - Cylinder Lock Strike, 1-3/8 Doors (2-3/4") CD008282 58 E2 - Cylinder Lock Strike, 1-3/4 Doors (2-3/4") CD008362 58 20 Template Parts May, 2018

PART NO. LIST PRICE FRAME HARDWARE CUT-OUT TEMPLATES HINGE 352 Hinge (3-1/2") 1 3/8" door frame CF002817 58 453 Hinge (4-1/2") 1 3/4" door frame CF002997 58 503 Hinge (5") 1 3/4" door frame CF003077 58

MORTISE STRIKE E1 — Mortise Strike, 1-3/4 Doors (4-7/8") CF001907 58 CYLINDER LOCK STRIKE E2 — Cylinder Lock Strike, 1-3/8 Doors (2-3/4") CF002087 58 E2 — Cylinder Lock Strike, 1-3/4 Doors (2-3/4") CF003987 58

STRIKE E3 — Dead Lock Strike (No Lip), 1-3/8 Doors (3-1/2") CF002247 58 E3 — Dead Lock Strike (No Lip), 1-3/4 Doors (3-1/2") CF002327 58 E4 — Dead Lock Strike (No Lip), 1-3/8 Doors (2-3/4") CF002407 58 E4 — Dead Lock Strike (No Lip), 1-3/4 Doors (2-3/4") CF002577 58 H2 — Flush Bolt Strike, 1-3/8 Doors (2-1/4") CF002657 58 H2 — Flush Bolt Strike, 1-3/4 Doors (2-1/4") CF002737 58 H5 — Reversible Flush Bolt, 1-3/4 Doors (3-7/8") CF004717 58 i Index Specialty Prices January, 2019 DESCRIPTION PAGE(S) Bullet Resistant 737S Series Doors Level 1-2 Doors 2-3 Level 3 Doors 4-5 Level 1-3 Frames 6-7 Level 4-8 Doors 8-9 Level 4-8 Frames 10-11 FRP - DISCONTINUED

Lead Lined 748 Series Doors 12-13 LLM Series Frames 16 ga. 14-15 14 ga. 16-17 12 ga. 18-19 RF Shielding 749 Series Doors 20-21 750 Series Doors 22-23 RM Series Frames 16 ga. 24-25 14 ga. 26-27 12 ga. 28-29 Stainless Steel 707 Series Doors 30-31 747 Series Doors 32-33 SMM Series Frames 16 ga. 34-35 14 ga. 36-37 12 ga. 38-39 STC 757 Series Doors 40-41 ADJ Series Frames 14 ga. 42-43 Water Resistant 780 Series Doors 44-45 787 Series Doors 46-47 WRM Series Frames 16 ga. 48-49 14 ga. 50-51 12 ga. 52-53 Attack Resistant with Glass 707 Series Doors 54-55 Attack Resistant Retrofit Kit and Glazing 56 Fire Rated 58-59 Forced Entry Bullet Resistant Opening 859 Series Door 60 Frames 61 Flood Resistant Opening 789 Series Door 62-63 14 ga. 64-65 12 ga. 66-67 2 737S Series Doors-Bullet Resistant Level 1-2 Bullet Resistant Door Prices May, 2018

WIDTH HEIGHT 16 ga 14 ga STANDARD DESCRIPTION 20, 24, 26, 68 1525 1632 Proprietary bullet resistant core with an "A" edge bevel and 28, 210, 30 exposed seam "S" edge are standard. 34, 36 68 1685 1792 1 7/8" thickness for 1 15/16" frame rabbet U.L. 752 bullet resistant label level 1 and level 2 doors must be ordered as 38, 310, 40 68 1735 1842 an assembly with factory welded M12 series frame. 20, 24, 26, 28, 210, 30 70 1538 1645 34, 36 70 1666 1773 EDGE BEVELS AVAILABLE 38, 310, 40 70 1750 1857 A standard (1/8" in 2" lock edge-square hinge edge)No Charge 20, 24, 26, 28, 210, 30 72 1565 1672 "B" specify (square both edges) No Charge 34, 36 72 1681 1788 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, 40 72 1767 1874 30 80 1718 1825 OPTIONS 34, 36 80 1839 1946 Galvanneal steel (A60) 38, 310, 40 80 1917 2024 16 and 14 gauge door Add 75 30 90 2065 2172 Galvanized (G90) includes epoxy primer Add 264 34, 36 90 2153 2260 Polyurethane slab core Add 99 38, 310, 40 90 2249 2356 "N" seamless edge filled Add 68 30 100 2176 2283 "T" Continuous wire welded Add 108 34, 36 100 2253 2360 Visual ID tag Add 4 38, 310, 40 100 2353 2460 NON STANDARD SIZE DOORS OVERSIZED DOOR OPTIONS Price as the next largest standard size door Doors over 8' high are factory crated for protection in transit NOTE: Doors over 4' 10" not available. Only bullet resistant hardware may be used. Contact factory for complete list of approved hardware. Crating is included in the price of doors over 8' high. 3 737S Series Doors -Bullet Resistant Level 1-2 Bullet Resistant Door Prices May, 2018

EXTRAS EXTRAS CAPS — top or bottom LOCK PREPARATIONS CONTINUED Steel installed flush (with screws per cap) Add 19 Mortise lock 1 3/4" door escutcheon trim G3 Standard

Mortise lock 1 3/4" door sectional trim G3A* Standard CLOSER Hotel and master ring cylinder functions Add 58

Surface mounted, reinforcement only Add 26 Mortise lock edge only preparation G3AEO Standard

Mortise lock reinforce only G3ARO Standard

HINGE PREPARATIONS Mortise panic exit G12* Add 56 4 1/2" standard or heavyweight Standard Rim panic reinforce only G11 Add 31 5" Hinge standard or heavyweightAdd Each 4 Rim panic reinforce with function holes G11* Add 31 1 1/2 pair up to and including 7'6"Standard Rim vertical rod reinforce only G11A Add 63 2 pair over 7'6" to 10'0" Standard Rim vertical rod with function holes G11A* Add 63 Anchor hinge set Concealed vertical rods G12A* Add 423 (e.g. McKinney TA792) No drill, no tap Add 142 Label Fire Pin (if required) Add 14 (e.g. McKinney TA793) No Add Continuous hinge No Add LOUVERS - Not Available

FLUSH BOLTS OR SURFACE BOLTS STRIKES Top and bottom flush bolt ANSI A115.4 H1 Add 61 Electric Strike E9* Add 80 (when used without astragal or with flat bar astragal) Electric raceway Add 118 Top and bottom surface bolt reinforced only SB Add 41 *Advise of manufacturer and function of hardware. Hardware function holes do not include trim mounting holes. ASTRAGAL - NOT AVAILABLE UNDERCUTS LOCK PREPARATIONS 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add

Cylindrical lock 1-3/4"” door 161 G2Standard All other undercuts per door Add 19 Cylindrical lock 1-3/4” door lever trim G2B* Standard (Universal lever trim prep.) VISION KITS Deadlock 1 3/4” door tubular 181 G16Standard Vision kits installed-standard rim type kit Deadlock 1 3/4" door mortise 190 G17 Add 66 FV (10-13/16" x 10-13/16: visible) Add 204 HG Add 243 FG Add 272

NOTE: U.L. Listed bullet resistant glass only Minimum glass size for vision lite is 12" x 12" Advise specific glass size when ordering doors. Factory installed glass available. Contact factory for pricing. 4 737 Series Doors-Bullet Resistant Level 3 Bullet Resistant Door Prices May, 2018

WIDTH HEIGHT 12 ga STANDARD DESCRIPTION 20, 24, 26, Proprietary core with an "A" edge bevel and continuous welded "T" edge are 68 1739 28, 210, 30 standard 34, 36 68 1867 1 3/4" thickness for 1 15/16" frame rabbet U.L. 752 bullet resistant doors must be ordered as an assembly with factory 38, 310, 40 68 1949 welded Level 3 series frame required. 20, 24, 26, 70 1752 28, 210, 30 34, 36 70 1880 EDGE BEVELS AVAILABLE 38, 310, 40 70 1964 A standard (1/8" in 2" lock edge-square hinge edge) No Charge 20, 24, 26, 28, 210, 30 72 1779 "B" specify (square both edges) No Charge

34, 36 72 1895 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, 40 72 1981 NOTE: For other edge bevels refere to Engineered Door Section 30 80 1932 34, 36 80 2053 OPTIONS 38, 310, 40 80 2131 Galvanneal steel (A60) Add 75 30 90 2279 Galvanized (G90) Add 264 34, 36 90 2367 38, 310, 40 90 2463 NON STANDARD SIZE DOORS 30 100 2390 Price as the next largest standard size door 34, 36 100 2467 38, 310, 40 100 2567 NOTE: Only bullet resistant hardware may be used. Contact factory for complete list of approved hardware. Crating is included in the price of doors over 8' high.

LISTED FIRE LABEL DOORS Label door restrictions per gauge and size can be determined in the current CURRIES product brochure. Prices are without closer (CL).

NOTE: This product is manufactured offsite and ships separately LESS Call to verify lead-times, freight cost, and ship schedule CL Underwriters Laboratories B and C Add 205 20 minute U.L. Add 168

Mortise lock or mortise exit device Refer to the Tech data manual for limitations

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 5 737 Series Doors -Bullet Resistant Level 3 Bullet Resistant Door Prices May, 2018

EXTRAS EXTRAS CAPS — top or bottom LOCK PREPARATIONS CONTINUED Steel installed flush (with screws per cap) Add 19 Mortise lock 1 3/4" door escutcheon trim G3 Standard

Mortise lock 1 3/4" door sectional trim G3A* Standard CLOSER Hotel and master ring cylinder functions Add 58 Surface mounted, reinforcement only Add 26 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard HINGE PREPARATIONS Mortise panic exit G12* Add 56 4 1/2" standard or heavyweightStandard Rim panic reinforce only G11 Add 31 5" Hinge standard or heavyweightAdd Each 4 Rim panic reinforce with function holes G11* Add 31 1 1/2 pair up to and including 7'6"Standard Rim vertical rod reinforce only G11A Add 63 2 pair over 7'6" to 10'0" Standard Rim vertical rod with function holes G11A* Add 63 Anchor hinge set (e.g. McKinney TA792) No drill, no tap Add 142 LOUVERS - Not Available (e.g. McKinney TA793) No Add Continuous hinge No Add STRIKES Electric Strike E9* Add 80 FLUSH BOLTS OR SURFACE BOLTS Electric raceway Add 118 Top and bottom flush bolt ANSI A115.4 H1 Add 61 *Advise of manufacturer and function of hardware. Hardware function holes do not (when used without astragal or with flat bar astragal) include trim mounting holes Top and bottom surface bolt reinforced only SB Add 41 UNDERCUTS ASTRAGAL 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add Flat astrgal Add 237 All other undercuts per door Add 19 Alternate to astragal; removable mullion by frame manufacturer required-see frames VISION KITS - NON FIRE RATED Vision kits installed-includes glass LOCK PREPARATIONS FV Add 1686 Cylindrical lock 1-3/4"” door 161 G2Standard FNV Add 1686 Cylindrical lock 1-3/4” door lever trim G2B*Standard HG Add 2108 (Universal lever trim prep.) FG Add 3162 Deadlock 1 3/4” door tubular 181 G16 Standard Deadlock 1 3/4" door mortise 190 G17 Add 66 6 BR3 level 1-3 12 Gauge Bullet Resistant Frames Bullet Resistant Frame Prices May, 2018

6-1/8 8 10 12 GENERAL INFORMATION 3 5/8 CURRIES BR3 series frames are available double rabbet (equal or WIDTH HEIGHT THRU THRU THRU THRU THRU 6 unequal) or BG3 single rabbet profile. Prices reflect hardware 7-7/8 9-7/8 11-7/8 14 preparations for 1 3/4" doors. Refer to CURRIES Architectural Technical Data Manual for standard details 6'8" 563 581 611 649 689 and limitations. 7' 568 588 621 657 698 1'6" 7'2" 580 592 626 662 702 Miter, corner reinforcing, and SMW welding charges are included with THRU these list prices on this page. 8' 3'0" 602 617 644 683 723 9' 608 630 659 693 736 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back bend. 7/16" 10' 622 639 670 705 745 N.A. 6'8" 571 585 618 655 694 2" face frames are standard. 1", 1 1/4" and 1 1/2", & 1 3/4" face SINGLES 7' 576 592 627 663 703 3' + frames are priced the same as 2" face at no extra charge. 7'2" 588 596 632 668 707 THRU 8' 610 621 650 689 728 Jamb depth ranges are listed above each column. 4'0" 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are available at 9' 616 634 665 699 741 no extra charge. 10' 630 643 676 711 750 6'8" 608 624 658 696 733 ANCHORS - foot clips are welded in place Standard loose jamb anchors are included in these prices 7' 613 630 664 702 743 4' + 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete 7'2" 623 634 670 706 745 THRU anchor information is listed in the Engineered Frame Section. 6'0" 8' 657 672 700 738 779 9' 661 684 716 748 791 10' 675 692 726 762 801 6'8" 620 634 674 711 747 Welding charge only per anchor Add 2

DOUBLES 7' 624 640 680 717 757 (Add for appropriate anchor) 6' + 7'2' 634 644 686 721 759 THRU 8' 668 682 716 753 793 EXTRAS 8'0" 9' 672 694 732 763 805 BUNDLING AND TAGGING FRAMES 10' 686 702 742 777 815 Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4 7 BR3 Level 1-3 12 Gauge Bullet Resistant Frames Bullet Resistant Frame Prices May, 2018

EXTRAS EXTRAS HARDWARE PREPARATIONS DUTCH DOOR FRAME N/C CLOSER PREPARATIONS Regular arm E10 Add 19 Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Parallel arm E11 Add 19 Single including 4'0" Add 35 Half Sleeve E18 Add 26 Pairs over 4'0" Add 49 Full Sleeve E17 Add 33 FLUSH BOLTS GALVANNEAL (A60) FRAME ADDS Standard ANSI 115.4 H2 Add 40 Price per 3 sided frame Add 36 Reversible (strike plate included) H5 Add 40 Reinforce only H1 Add 19 GALVANIZED (G-90) HINGE PREPARATIONS Price per 3 Sided frame Add 60 3 1/2" 1 pair or 1 1/2 pair Standard 4 1/2" standard or heavyweight Standard FIRE FRAME LABELS 1 1/2 pair up to and including 7'6" Standard UNDERWRITERS LABORATORIES 2 pair over 7'6" to 8'0" Standard Prices are less closer (CL) 5" standard or heavyweight Add Each 4 Less Full surface mounted continuous hinge reinforcement Add 56 CL High frequency reinforcement strap support Single Frame Add 17 Per hinge Add 16 Double frame Add 34 HOLDERS Overhead concealed Add 123 PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 REMOVABLE MULLION For pairs of doors; alternate to astragal on doors Add 426 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 8 737 Series Doors-Bullet Resistant Level 4-8 Bullet Resistant Door Prices May, 2018

WIDTH HEIGHT 14 ga STANDARD DESCRIPTION 20, 24, 26, Proprietary core with an "A" edge bevel and continuous welded "T" edge 68 4239 28, 210, 30 are standard. 34, 36 68 4366 1 3/4" thick door 38, 310, 40 68 4448 20, 24, 26, 70 4252 28, 210, 30 34, 36 70 4380 EDGE BEVELS AVAILABLE 38, 310, 40 70 4463 A standard (1/8" in 2" lock edge-square hinge edge) No Charge 20, 24, 26, 72 4278 "B" specify (square both edges) No Charge 28, 210, 30 34, 36 72 4395 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, 40 72 4481 30 80 4431 OPTIONS 34, 36 80 4552 Galvanneal steel (A60) Add 75 38, 310, 40 80 4630 Galvanized (G90) Add 264 30 90 4778 34, 36 90 4867 NON STANDARD SIZE DOORS 38, 310, 40 90 4962 Price as the next largest standard size door 30 100 4889 34, 36 100 4966 LISTED FIRE LABEL DOORS-Call for availability 38, 310, 40 100 5067

NOTE: This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 9 737 Series Doors - Bullet Resistant Level 4-8 Bullet Resistant Door Prices May, 2018

EXTRAS EXTRAS CAPS — top or bottom LOCK PREPARATIONS CONTINUED Steel installed flush (with screws per cap) Add 19 Mortise lock 1 3/4" door escutcheon trim G3 Standard Mortise lock 1 3/4" door sectional trim G3A* Standard CLOSER Hotel and master ring cylinder functions Standard Surface mounted, reinforcement only Add 26 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard FLUSH BOLTS OR SURFACE BOLTS Mortise panic exit G12* Add 56 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Rim panic reinforce only G11 Add 31 (when used without astragal or with flat bar astragal) Rim panic reinforce with function holes G11* Add 31 Top and bottom surface bolt reinforced only SB Add 41 Rim vertical rod reinforce only G11A Add 63 Rim vertical rod with function holes G11A* Add 63 HINGE PREPARATIONS Continuous hinge preparation (mounting holes field drilled) STRIKES Concealed mounting No Add 4 7/8" ANSI lipped strike 1 3/4" door E1 Add 43 Surface mounting Add 74 2 3/4" ANSI lipped strike 1 3/4" E2 Add 43 3 1/2" ANSI deadlock strike E3 Add 43 ASTRAGAL -NOT AVAILABLE 2 3/4" ANSI deadlock strike E4 Add 43 Pair of doors requires removable mullion by frame manufacturer Electric strike E9 Add 80 see frames Electric raceway Add 118 Open back strike non label door * Add 89 LOCK PREPARATIONS *Advise of manufacturer and function of hardware. Cylindrical lock 1-3/4"” door 161 G2Standard Hardware function holes do not include trim mounting holes. Cylindrical lock 1-3/4” door lever trim G2B* Standard (Universal lever trim prep ) UNDERCUTS Deadlock 1 3/4” door tubular 181 G16 Standard 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add Deadlock 1 3/4" door mortise 190 G17 Add 66 All other undercuts per door Add 19 Interconnected lock G25 Add 43 VISION KITS Vision kits installed- glass included FV Add 3541 FNV Add 3541 HG Add 4721 FG Add 9441 10 BR4 level 4-8 14 Gauge Bullet Resistant Frames Bullet Resistant Frame Prices May, 2018

6-1/8 8 10 12 GENERAL INFORMATION 3 5/8 WIDTH HEIGHT THRU THRU THRU THRU CURRIES BR4 series frames are available double rabbet THRU 6 7-7/8 9-7/8 11-7/8 14 (equal or unequal) or BG4 single rabbet profile. Prices reflect hardware preparations for 1 3/4" doors. Refer to CURRIES 6'8" 1772 1791 1822 1859 1898 Architectural Technical Data Manual for standard details 7' 1778 1798 1830 1868 1908 1'6" and limitations. 7'2" 1790 1802 1836 1872 1911 THRU 8' MIter, notch, and FW welding charges are included with these 3'0" 1812 1827 1853 1893 1932 9' 1819 1839 1869 1904 1947 list prices on this page. 10' 1831 1849 1879 1916 1955 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back 6'8" 1780 1796 1828 1864 1904 bend. 7/16" N.A. SINGLES 7' 1786 1803 1836 1873 1914 3' + 7'2" 1798 1807 1842 1877 1917 2" face frames are standard. 1", 1 1/4" and 1 1/2", & 1 3/4" face THRU 8' 1820 1832 1859 1898 1938 frames are priced the same as 2" face at no extra charge. 4'0" 9' 1827 1844 1875 1909 1953 Jamb depth ranges are listed above each column. 10' 1839 1854 1885 1921 1961 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 6'8" 1818 1836 1867 1905 1943 available at no extra charge. 7' 1822 1842 1873 1911 1953 4' + 7'2" 1834 1846 1881 1915 1955 THRU ANCHORS - foot clips are welded in place Standard loose jamb anchors are included in these prices 6'0" 8' 1868 1882 1909 1947 1989 9' 1872 1894 1925 1959 2003 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete 10' 1884 1904 1935 1971 2011 anchor information is listed in the Engineered Frame Section. 6'8" 1829 1845 1883 1920 1957

DOUBLES 7' 1833 1851 1889 1926 1967 6' + 7'2' 1845 1855 1897 1930 1969 THRU 8' 1879 1891 1925 1962 2003 Welding charge only per anchor Add 2 8'0" 9' 1883 1903 1941 1974 2017 (Add for appropriate anchor) 10' 1895 1913 1951 1986 2025 EXTRAS BUNDLING AND TAGGING FRAMES NOTE: This product is manufactured offsite and ships separately Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Call to verify lead-times, freight cost, and ship schedule Welded Frames Add 4

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 11 BR4 Level 4-8 14 Gauge Bullet Resistant Frames Bullet Resistant Frame Prices May, 2018

EXTRAS EXTRAS HARDWARE PREPARATIONS DUTCH DOOR FRAME N/C CLOSER PREPARATIONS Regular arm E10 Add 19 Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Parallel arm E11 Add 19 Single including 4'0" Add 35 Half Sleeve E18 Add 26 Pairs over 4'0" Add 49 Full Sleeve E17 Add 33 FLUSH BOLTS GALVANNEAL (A60) FRAME ADDS Standard ANSI 115.4 H2 Add 40 Price per 3 sided frame Add 36 Reversible (strike plate included) H5 Add 40 Reinforce only H1 Add 19 GALVANIZED (G-90) HINGE PREPARATIONS Price per 3 Sided frame Add 60 Full surface mounted continuous hinge reinforcement Add 56 HOLDERS FIRE FRAME LABELS - Call for availability Overhead concealed Add 123 PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 REMOVABLE MULLION For pairs of doors; alternate to astragal on doors Add 941 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 12 748 Series Doors-Lead Lined Lead Lined Door Prices May, 2018

PRICE INCLUDES 1/32" LEAD WIDTH HEIGHT 18 GA 16 GA 14 GA 12 GA STANDARD DESCRIPTION 20, 24, 26, Vertically welded steel stiffened lead lined core with an "A" bevel 68 2537 2614 2935 3124 28, 210, 30 and continuous welded "T" edge is standard 34, 36 68 2665 2742 3063 3252 1 3/4" thick door 38, 310, 40 68 2747 2824 3145 3334 4'0" x 10'0" maximum size door leaf 20, 24, 26, 70 2550 2627 2948 3137 28, 210, 30 34, 36 70 2679 2756 3077 3266 EDGE BEVELS AVAILABLE 38, 310, 40 70 2762 2839 3160 3349 A standard (1/8" in 2" lock edge-square hinge edge) No Charge 20, 24, 26, 72 2577 2654 2975 3164 "B" specify (square both edges) No Charge 28, 210, 30 34, 36 72 2694 2771 3092 3281 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, 40 72 2779 2856 3177 3366 30 80 2730 2807 3128 3317 OPTIONS 34, 36 80 2851 2928 3249 3438 Galvanneal steel (A60) 38, 310, 40 80 2929 3006 3327 3516 18, 16, 14 and 12 gauge door Add 75 30 90 3077 3154 3475 3664 Galvanized (G90) Add 264 34, 36 90 3166 3243 3564 3753 38, 310, 40 90 3261 3338 3659 3848 NON STANDARD SIZE DOORS 30 100 3188 3265 3586 3775 Price as the next largest standard size door 34, 36 100 3265 3342 3663 3852 38, 310, 40 100 3366 3443 3764 3953 LISTED FIRE LABEL DOORS Label door restrictions per gauge and size can be determined in the current CURRIES product brochure. Prices are wihtout closer (CL). NOTE: This product is manufactured offsite and ships separately LESS Call to verify lead-times, freight cost, and ship schedule CL Underwirters Laboratories B and C Add 47 20 minute U.L. Add 10

LEAD THICKNESS 1/16" Lead Add 423 1/8" Lead Add 1265 3/16" Lead Add 2108 1/4" Lead Add 2951 For alternate thicknesses, contact manufacturer

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 13 748 Series Doors -Lead Lined Lead Lined Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Flat astragal shipped loose (pair only) Add 212 Mortise lock 1 3/4" door escutcheon trimG3 Standard Mortise lock 1 3/4" door sectional trim G3A* Standard CAPS — top or bottom Hotel and master ring cylinder functions Standard Steel installed flush (with screws per cap) Add 19 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard CLOSER Mortise panic exit G12* Add 56 Surface mounted, reinforcement only Add 26 Rim panic reinforce only G11 Add 31 Concealed or semi-concealed Add 237 Rim panic reinforce with function holes G11* Add 31 Rim vertical rod reinforce only G11A Add 63 FLUSH BOLTS OR SURFACE BOLTS Rim vertical rod with function holes G11A* Add 63 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Concealed vertical rods G12A* Add 423 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Add 43 HINGE PREPARATIONS 2 3/4" ANSI lipped strike 1 3/4" E2 Add 43 4 1/2" standard or heavyweight Standard 3 1/2" ANSI deadlock strike E3 Add 43 5" Hinge standard or heavyweightAdd Each 4 2 3/4" ANSI deadlock strike E4 Add 43 1 1/2 pair up to and including 7'6" Standard Electric strike E9* Add 79 2 pair over 7'6" to 10'0" Standard Electric raceway Add 118 Anchor hinge set Open back strike non label door * Add 88 (e.g. McKinney TA792) No drill, no tap Add 142 (e.g. McKinney TA793) No Add *Advise of manufacturer and function of hardware. Continuous hinge preparation (mounting holes field drilled) Hardware function holes do not include trim mounting holes. Concealed mounting No Add (e.g. McKinney - 11, 24) UNDERCUTS Surface mounting 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add (e.g. McKinney-21, 53) Add 74 All other undercuts per door Add 19

LOCK PREPARATIONS VISION KITS Cylindrical lock 1-3/4"” door 161 G2Standard Vision kits installed- glass by others (specify glass thickness) Cylindrical lock 1-3/4” door lever trim G2B*Standard 1/4" thick glass standard (Universal lever trim prep ) FV Add 219 Deadlock 1 3/4” door tubular 181 G16Standard FNV Add 254 Deadlock 1 3/4" door mortise 190 G17 Add 66 HG Add 292 Interconnected lock G25 Add 43 FG Add 483 Add for other glass thickness up to 1" Add 97 14 LLM Series Frames - 16 Ga. Lead Lined 1/32" Lead Lined Frame Prices May, 2018

6-1/8 8 10 12 GENERAL INFORMATION 3 1/2 WIDTH HEIGHT THRU THRU THRU THRU CURRIES LLM series frames are available double rabbet equal THRU 6 7-7/8 9-7/8 11-7/8 14 or unequal, or single rabbet profile. Prices reflect hardware preparations for 1 3/4" doors. Refer to CURRIES Architectural 6'8" 1018 1037 1067 1105 1145 Technical Data Manual for standard details and limitations. 7' 1023 1044 1076 1113 1154 1'6" 7'2" 1035 1048 1081 1117 1157 Miter, notch, and FW welding charges are included with these list THRU 8' prices on this page. 3'0" 1057 1072 1099 1139 1179 9' 1063 1086 1114 1149 1192 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back bend. 10' 1077 1095 1125 1161 1201 7/16" N.A. 6'8" 1027 1041 1074 1111 1150 SINGLES 7' 1032 1048 1082 1119 1159 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face 3' + 7'2" 1044 1052 1088 1123 1162 frames are priced the same as 2" face at no extra charge. THRU 8' 1066 1076 1106 1145 1184 4'0" Jamb depth ranges are listed above each column. 9' 1072 1090 1121 1155 1197 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 10' 1086 1099 1132 1167 1206 available at no extra charge. 6'8" 1065 1080 1114 1152 1189 7' 1069 1086 1120 1158 1199 ANCHORS - foot clips are welded in place 4' + 7'2" 1079 1090 1126 1162 1201 Standard loose jamb anchors are included in these prices; 3 per THRU jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 6'0" 8' 1113 1126 1156 1194 1235 9' 1117 1140 1172 1204 1247 information is listed in the Engineered Frame Section. 10' 1131 1148 1182 1218 1257 6'8" 1075 1090 1130 1167 1203

DOUBLES 7' 1079 1096 1136 1173 1213 6' + 7'2' 1089 1100 1142 1177 1215 THRU 8' 1123 1136 1172 1209 1249 8'0" 9' 1127 1150 1188 1219 1261 Welding charge only per anchor Add 2 10' 1141 1158 1198 1233 1271 (Add for appropriate anchor)

NOTE: This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule EXTRAS BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4

LEAD THICKNESS 1/16" Lead Add 213 1/8" Lead Add 634 3/16" Lead Add 1055 1/4" Lead Add 1476 For alternate thicknesses, contact manufacturer

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 15 LLM Series Frames-16 Ga Lead Lines 1/32" Lead LIned Frame Prices May, 2018

EXTRAS EXTRAS HARDWARE PREPARATIONS DUTCH DOOR FRAME N/C CLOSER PREPARATIONS Concealed closer Add 184 Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Regular arm E10 Add 19 Single including 4'0" Add 35 Parallel arm E11 Add 19 Pairs over 4'0" Add 49 Half Sleeve E18 Add 26 Full Sleeve E17 Add 33 GALVANNEAL (A60) FRAME ADDS FLUSH BOLTS Price per 3 sided frame Add 36 Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 GALVANIZED (G-90) Reinforce only H1 Add 19 Price per 3 Sided frame Add 60 HINGE PREPARATIONS 3 1/2" 1 pair or 1 1/2 pair Standard FIRE FRAME LABELS 4 1/2" standard or heavyweight Standard UNDERWRITERS LABORATORIES 1 1/2 pair up to and including 7'6" Standard Prices are less closer (CL) 2 pair over 7'6" to 8'0" Standard Less 5" standard or heavyweightAdd Each 4 CL Full surface mounted continuous hinge reinforcement Add 56 Single Frame Add 17 High frequency reinforcement strap support Double frame Add 34 Per hinge Add 29 HOLDERS Overhead concealed Add 123 Overhead stop and holder surface mounted 14 ga Add 19 PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" doorE3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" doorE4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 16 LLM Series Frames - 14 Ga. Lead Lined 1/32" Lead Lined Frame Prices May, 2018

6-1/8 8 10 12 3 1/2 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU 6 CURRIES LLM series frames are available double rabbet equal 7-7/8 9-7/8 11-7/8 14 or unequal, or single rabbet profile. Prices reflect hardware 6'8" 1066 1085 1115 1153 1193 preparations for 1 3/4" doors. Refer to CURRIES 7' 1071 1092 1124 1161 1202 Architectural Technical Data Manual for standard details 1'6" 7'2" 1083 1096 1129 1165 1205 and limitations. THRU 8' 3'0" 1105 1120 1147 1187 1227 Miter, notch, and FW welding charges are included with these 9' 1111 1134 1162 1197 1240 list prices on this page. 10' 1125 1143 1173 1209 1249 6'8" 1075 1089 1122 1159 1198 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back SINGLES 7' 1080 1096 1130 1167 1207 bend. 7/16" N.A. 3' + 7'2" 1092 1100 1136 1171 1210 THRU 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face 8' 1114 1124 1154 1193 1232 4'0" frames are priced the same as 2" face at no extra charge. 9' 1120 1138 1169 1203 1245 10' 1134 1147 1180 1215 1254 Jamb depth ranges are listed above each column. 6'8" 1113 1128 1162 1200 1237 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 7' 1117 1134 1168 1206 1247 available at no extra charge. 4' + 7'2" 1127 1138 1174 1210 1249 THRU ANCHORS - foot clips are welded in place 8' 1161 1174 1204 1242 1283 6'0" Standard loose jamb anchors are included in these prices; 3 per 9' 1165 1188 1220 1252 1295 jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 10' 1179 1196 1230 1266 1305 information is listed in the Engineered Frame Section. 6'8" 1123 1138 1178 1215 1251

DOUBLES 7' 1127 1144 1184 1221 1261 6' + 7'2' 1137 1148 1190 1225 1263 THRU 8' 1171 1184 1220 1257 1297 8'0" 9' 1175 1198 1236 1267 1309 10' 1189 1206 1246 1281 1319 Welding charge only per anchor Add 2 (Add for appropriate anchor)

NOTE: This product is manufactured offsite and ships separately EXTRAS Call to verify lead-times, freight cost, and ship schedule BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4

LEAD THICKNESS 1/16" Lead Add 213 1/8" Lead Add 634 3/16" Lead Add 1055 1/4" Lead Add 1476 For alternate thicknesses, contact manufacturer

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 17 LLM Series Frames-14 Ga Lead Lines 1/32" Lead LIned Frame Prices May, 2018

EXTRAS EXTRAS HARDWARE PREPARATIONS DUTCH DOOR FRAME N/C CLOSER PREPARATIONS Concealed closer Add 184 Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Regular arm E10 Add 19 Single including 4'0" Add 35 Parallel arm E11 Add 19 Pairs over 4'0" Add 49 Half Sleeve E18 Add 26 Full Sleeve E17 Add 33 GALVANNEAL (A60) FRAME ADDS FLUSH BOLTS Price per 3 sided frame Add 35 Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 GALVANIZED (G-90) Reinforce only H1 Add 19 Price per 3 Sided frame Add 60 HINGE PREPARATIONS 3 1/2" 1 pair or 1 1/2 pair Standard FIRE FRAME LABELS 4 1/2" standard or heavyweight Standard UNDERWRITERS LABORATORIES 1 1/2 pair up to and including 7'6" Standard Prices are less closer (CL) 2 pair over 7'6" to 8'0" Standard Less 5" standard or heavyweight Add Each 4 CL Full surface mounted continuous hinge reinforcement Add 56 Single Frame Add 17 High frequency reinforcement strap support Double frame Add 34 Per hinge Add 16 HOLDERS Overhead concealed Add 123 Overhead stop and holder surface mounted 14 ga Add 19 PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 18 LLM Series Frames - 12 Ga. Lead Lined 1/32" Lead Lined Frame Prices May, 2018

6-1/8 8 10 12 3 1/2 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU 6 CURRIES LLM series frames are available double rabbet equal 7-7/8 9-7/8 11-7/8 14 or unequal, or single rabbet profile. Prices reflect hardware 6'8" 1297 1316 1346 1384 1424 preparations for 1 3/4" doors. Refer to CURRIES Architectural 7' 1302 1323 1355 1392 1433 Technical Data Manual for standard details and limitations. 1'6" 7'2" 1314 1327 1360 1396 1436 THRU Miter, notch, and FW welding charges are included with these 8' 3'0" 1336 1351 1378 1418 1458 list prices on this page. 9' 1342 1365 1393 1428 1471 10' 1356 1374 1404 1440 1480 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back 6'8" 1306 1320 1353 1390 1429 bend. 7/16" N.A. SINGLES 7' 1311 1327 1361 1398 1438 3' + 7'2" 1323 1331 1367 1402 1441 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face THRU frames are priced the same as 2" face at no extra charge. 8' 1345 1355 1385 1424 1463 4'0" 9' 1351 1369 1400 1434 1476 Jamb depth ranges are listed above each column. 10' 1365 1378 1411 1446 1485 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 6'8" 1344 1359 1393 1431 1468 available at no extra charge. 7' 1348 1365 1399 1437 1478 4' + 7'2" 1358 1369 1405 1441 1480 ANCHORS - foot clips are welded in place THRU Standard loose jamb anchors are included in these prices; 3 per 8' 1392 1405 1435 1473 1514 6'0" jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 9' 1396 1419 1451 1483 1526 information is listed in the Engineered Frame Section. 10' 1410 1427 1461 1497 1536 6'8" 1354 1369 1409 1446 1482

DOUBLES 7' 1358 1375 1415 1452 1492 6' + 7'2' 1368 1379 1421 1456 1494 THRU 8' 1402 1415 1451 1488 1528 8'0" 9' 1406 1429 1467 1498 1540 Welding charge only per anchor Add 2 10' 1420 1437 1477 1512 1550 (Add for appropriate anchor)

NOTE: This product is manufactured offsite and ships separately EXTRAS Call to verify lead-times, freight cost, and ship schedule BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4

LEAD THICKNESS 1/16" Lead Add 213 1/8" Lead Add 634 3/16" Lead Add 1055 1/4" Lead Add 1476 For alternate thicknesses, contact manufacturer

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 19 LLM Series Frames - 12 Ga Lead Lines 1/32" Lead LIned Frame Prices May, 2018

EXTRAS EXTRAS HARDWARE PREPARATIONS DUTCH DOOR FRAME N/C CLOSER PREPARATIONS Concealed closer Add 184 Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Regular arm E10 Add 19 Single including 4'0" Add 35 Parallel arm E11 Add 19 Pairs over 4'0" Add 49 Half Sleeve E18 Add 26 Full Sleeve E17 Add 33 GALVANNEAL (A60) FRAME ADDS FLUSH BOLTS Price per 3 sided frame Add 36 Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 GALVANIZED (G-90) Reinforce only H1 Add 19 Price per 3 Sided frame Add 60 HINGE PREPARATIONS 3 1/2" 1 pair or 1 1/2 pair Standard FIRE FRAME LABELS 4 1/2" standard or heavyweight Standard UNDERWRITERS LABORATORIES 1 1/2 pair up to and including 7'6" Standard Prices are less closer (CL) 2 pair over 7'6" to 8'0" Standard Less 5" standard or heavyweight Add Each 4 CL Full surface mounted continuous hinge reinforcement Add 56 Single Frame Add 17 High frequency reinforcement strap support Double frame Add 34 Per hinge Add 16 HOLDERS Overhead concealed Add 123 Overhead stop and holder surface mounted 14 ga Add 19 PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 20 749 Series Doors - RF Shielding RF Shielding Flush Door Prices May, 2018

WIDTH HEIGHT 16 GA 14 GA 12 GA STANDARD DESCRIPTION 20, 24, 26, Polystyrene core with an "A" bevel and continuous welded "T" edge is 68 6058 6379 6568 28, 210, 30 standard. 34, 36 68 6185 6506 6695 1 3/4" thick door. 38, 310, 40 68 6267 6588 6777 Doors 40db@10khz per mil-std-285. Includes conductive prime paint, seal, 20, 24, 26, threshold and tube of conductive caulk 70 6071 6392 6581 28, 210, 30 34, 36 70 6199 6520 6709 EDGE BEVELS AVAILABLE 38, 310, 40 70 6282 6603 6792 A standard (1/8" in 2" lock edge-square hinge edge) No Charge 20, 24, 26, 72 6097 6418 6607 "B" specify (square both edges) No Charge 28, 210, 30 34, 36 72 6214 6535 6724 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, 40 72 6300 6621 6810 30 80 6250 6571 6760 OPTIONS 34, 36 80 6371 6692 6881 Galvanneal steel (A60) 38, 310, 40 80 6449 6770 6959 16, 14 and 12 gauge door Add 75 30 90 6597 6918 7107 Galvanized (G90) Add 264 34, 36 90 6686 7007 7196 38, 310, 40 90 6781 7102 7291 NON STANDARD SIZE DOORS 30 100 6708 7029 7218 Price as the next largest standard size door 34, 36 100 6785 7106 7295 38, 310, 40 100 6886 7207 7396 CORES Polyurethane Add 99

NOTE: This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 21 749 Series Doors - RF Shielding RF Shielding Flush Door Prices May, 2018

EXTRAS EXTRAS CAPS — top or bottom LOCK PREPARATIONS CONTINUED Steel installed flush (with screws per cap) Add 19 Mortise lock 1 3/4" door escutcheon trim G3 Standard Welded top or bottom Add 72 Mortise lock 1 3/4" door sectional trim G3A* Standard CLOSER Hotel and master ring cylinder functions Standard Surface mounted, reinforcement only Add 26 Mortise lock edge only preparation G3AEO Standard Concealed or semi-concealed Add 226 Mortise lock reinforce only G3ARO Standard Mortise panic exit G12* Add 56 FLUSH BOLTS OR SURFACE BOLTS Rim panic reinforce only G11 Add 31 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Rim panic reinforce with function holes G11* Add 31 (when used without astragal or with flat bar astragal) Rim vertical rod reinforce only G11A Add 63 Top and bottom surface bolt reinforced only SB Add 41 Rim vertical rod with function holes G11A* Add 63 Concealed vertical rods G12A* Add 423 HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard STRIKES 5" Hinge standard or heavyweightAdd Each 4 4 7/8" ANSI lipped strike 1 3/4" door E1 Add 43 1 1/2 pair up to and including 7'6" Standard 2 3/4" ANSI lipped strike 1 3/4" E2 Add 43 2 pair over 7'6" to 10'0" Standard 3 1/2" ANSI deadlock strike E3 Add 43 Anchor hinge set 2 3/4" ANSI deadlock strike E4 Add 43 (e.g. McKinney TA792) No drill, no tap Add 142 Electric Strike E9* Add 80 (e.g. McKinney TA793) No Add Electric raceway Add 118 Continuous hinge preparation (mounting holes field drilled) Open back strike non label door * Add 89 Concealed mounting No Add *Advise of manufacturer and function of hardware. (e.g. McKinney 11, 24) Hardware function holes do not include trim mounting holes Surface mounting (e.g. McKinney 21, 53) Add 74 UNDERCUTS 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add LOCK PREPARATIONS All other undercuts per door Add 19 Cylindrical lock 1-3/4"” door 161 G2 Standard Cylindrical lock 1-3/4” door lever trim G2B* Standard (Universal lever trim prep.) Deadlock 1 3/4” door tubular 181 G16 Standard Deadlock 1 3/4" door mortise 190 G17 Add 66 Interconnected lock G25 Add 43 22 750 Series Doors - Steel Stiffened RF Shielding RF Shielding Flush Door Prices May, 2018

WIDTH HEIGHT 16 GA 14 GA 12 GA STANDARD DESCRIPTION 20, 24, 26, Steel Stiffened core with an "A" bevel and continuous welded "T" edge is 68 6157 6474 6661 28, 210, 30 standard 34, 36 68 6284 6601 6788 1 3/4" thick door 38, 310, 40 68 6366 6683 6870 Doors 40db@10khz per mil-std-285. Includes conductive prime paint, seal, 20, 24, 26, threshold and tube of conductive caulk. 70 6170 6487 6674 28, 210, 30 34, 36 70 6298 6615 6802 EDGE BEVELS AVAILABLE 38, 310, 40 70 6381 6698 6885 A standard (1/8" in 2" lock edge-square hinge edge) No Charge 20, 24, 26, 72 6196 6513 6700 "B" specify (square both edges) No Charge 28, 210, 30 34, 36 72 6313 6630 6817 "G" specify (1/8" in 2" bevel both edges) Add 12 38, 310, 40 72 6399 6716 6903 30 80 6349 6666 6853 OPTIONS 34, 36 80 6470 6787 6974 Galvanneal steel (A60) 38, 310, 40 80 6548 6865 7052 16, 14 and 12 gauge door Add 75 30 90 6696 7013 7200 Galvanized (G90) Add 264 34, 36 90 6785 7102 7289 38, 310, 40 90 6880 7197 7384 NON STANDARD SIZE DOORS 30 100 6807 7124 7311 Price as the next largest standard size door 34, 36 100 6884 7201 7388 38, 310, 40 100 6985 7302 7489

NOTE: This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 23 750 Series Doors - Steel Stiffened RF Shielding RF Shielding Flush Door Prices May, 2018

EXTRAS EXTRAS CAPS — top or bottom LOCK PREPARATIONS CONTINUED Steel installed flush (with screws per cap) Add 19 Mortise lock 1 3/4" door escutcheon trim G3 Standard Welded top or bottom Add 72 Mortise lock 1 3/4" door sectional trim G3A* Standard

Hotel and master ring cylinder functions Standard CLOSER Surface mounted, reinforcement only Add 26 Mortise lock edge only preparation G3AEO Standard Concealed or semi-concealed Add 226 Mortise lock reinforce only G3ARO Standard Mortise panic exit G12* Add 56 FLUSH BOLTS OR SURFACE BOLTS Rim panic reinforce only G11 Add 31 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Rim panic reinforce with function holes G11* Add 31 (when used without astragal or with flat bar astragal) Rim vertical rod reinforce only G11A Add 63 Top and bottom surface bolt reinforced only SB Add 41 Rim vertical rod with function holes G11A* Add 63 Concealed vertical rods G12A* Add 423 HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard STRIKES 5" Hinge standard or heavyweightAdd Each 4 4 7/8" ANSI lipped strike 1 3/4" door E1 Add 43 1 1/2 pair up to and including 7'6" Standard 2 3/4" ANSI lipped strike 1 3/4" E2 Add 43 2 pair over 7'6" to 10'0" Standard 3 1/2" ANSI deadlock strike E3 Add 43 Anchor hinge set 2 3/4" ANSI deadlock strike E4 Add 43 (e.g. McKinney TA792) No drill, no tap Add 142 Electric Strike E9* Add 80 (e.g. McKinney TA793) No Add Electric raceway Add 118 Continuous hinge preparation (mounting holes field drilled) Open back strike non label door * Add 89 Concealed mounting No Add *Advise of manufacturer and function of hardware. (e.g. McKinney 11, 24) Hardware function holes do not include trim mounting holes Surface mounting (e.g. McKinney 21, 53) Add 74 UNDERCUTS 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add LOCK PREPARATIONS All other undercuts per door Add 19 Cylindrical lock 1-3/4"” door 161 G2 Standard Cylindrical lock 1-3/4” door lever trim G2B* Standard (Universal lever trim prep.) Deadlock 1 3/4” door tubular 181 G16 Standard Deadlock 1 3/4" door mortise 190 G17 Add 66 Interconnected lock G25 Add 43 24 RM Series Frames - 16 Ga. RF Shielded Frame RF Shielded Frame Prices May, 2018

3 1/2 6-1/8 8 10 12 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU CURRIES RM series frames are available double rabbet equal or 6 7-7/8 9-7/8 11-7/8 14 unequal, or single rabbet profile. Prices reflect hardware preparations for 1 3/4" doors. Refer to CURRIES Architectural 6'8" 2986 3005 3036 3073 3113 Technical Data Manual for standard detailsand limitations. 7' 2992 3013 3044 3082 3123 1'6" 7'2" 3004 3017 3050 3086 3126 Miter, notch, and SW welding charges are included with these list THRU 8' prices on this page. 3'0" 3026 3042 3067 3107 3147 9' 3033 3054 3083 3118 3161 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back 10' 3045 3064 3093 3130 3170 bend. 7/16" N.A. 6'8" 2995 3009 3043 3079 3118 SINGLES 7' 3001 3017 3051 3088 3128 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face 3' + 7'2" 3013 3021 3057 3092 3131 frames are priced the same as 2" face at no extra charge. THRU 8' 3035 3046 3074 3113 3152 4'0" 9' 3042 3058 3090 3124 3166 Jamb depth ranges are listed above each column. 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 10' 3054 3068 3100 3136 3175 available at no extra charge. 6'8" 3033 3048 3082 3120 3157 7' 3037 3056 3088 3126 3167 4' + ANCHORS - foot clips are welded in place 7'2" 3049 3060 3096 3130 3169 Standard loose jamb anchors are included in these prices; 3 per THRU jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 6'0" 8' 3083 3096 3124 3162 3203 9' 3087 3108 3140 3174 3217 information is listed in the Engineered Frame Section. 10' 3099 3118 3150 3186 3225 6'8" 3043 3058 3098 3134 3171

DOUBLES 7' 3047 3066 3104 3140 3181 6' + 7'2' 3059 3070 3112 3144 3183 THRU 8' 3093 3106 3140 3176 3217 8'0" 9' 3097 3118 3156 3188 3231 Welding charge only per anchor Add 2 10' 3109 3128 3166 3200 3239 (Add for appropriate anchor)

NOTE: This product is manufactured offsite and ships separately EXTRAS Call to verify lead-times, freight cost, and ship schedule BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 25 RM Series Frames - 16Ga RF Shielded Frame RF Shielded Frame Prices May, 2018

EXTRAS EXTRAS HARDWARE PREPARATIONS Dutch Door Frame N/C CLOSER PREPARATIONS Concealed closer Add 184 Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Regular arm E10 Add 19

Single including 4'0" Add 35 Parallel arm E11 Add 19

Pairs over 4'0" Add 49 Half Sleeve E18 Add 26

Full Sleeve E17 Add 33

GALVANNEAL (A60) FRAME ADDS FLUSH BOLTS Price per 3 sided frame Add 36 Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 GALVANIZED (G-90) Reinforce only H1 Add 19 Price per 3 Sided frame Add 60 HINGE PREPARATIONS 3 1/2" 1 pair or 1 1/2 pair Standard 4 1/2" standard or heavyweight Standard 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 8'0" Standard 5" standard or heavyweightAdd Each 4 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16 HOLDERS Overhead concealed Add 123 Overhead stop and holder surface mounted 14 ga Add 19 PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" doorE3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" doorE4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 26 RM Series Frames - 14 Ga. RF Shielded Frame RF Shielded Frame Prices May, 2018

3 1/2 6-1/8 8 10 12 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU CURRIES RM series frames are available double rabbet equal or 6 7-7/8 9-7/8 11-7/8 14 unequal, or single rabbet profile. Prices reflect hardware preparations for 1 3/4" doors. Refer to CURRIES 6'8" 3034 3053 3084 3121 3161 Architectural Technical Data Manual for standard details 7' 3040 3061 3092 3130 3171 1'6" and limitations. 7'2" 3052 3065 3098 3134 3174 THRU 8' 3'0" 3074 3090 3115 3155 3195 Miter, notch, and SW welding charges are included with these list 9' 3081 3102 3131 3166 3209 prices on this page. 10' 3093 3112 3141 3178 3218 6'8" 3043 3057 3091 3127 3166 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back bend.

SINGLES 7/16" N.A. 7' 3049 3065 3099 3136 3176 3' + 7'2" 3061 3069 3105 3140 3179 THRU 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face 8' 3083 3094 3122 3161 3200 4'0" frames are priced the same as 2" face at no extra charge. 9' 3090 3106 3138 3172 3214 10' 3102 3116 3148 3184 3223 Jamb depth ranges are listed above each column. 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 6'8" 3081 3096 3130 3168 3205 available at no extra charge. 7' 3085 3104 3136 3174 3215 4' + 7'2" 3097 3108 3144 3178 3217 THRU ANCHORS - foot clips are welded in place 6'0" 8' 3131 3144 3172 3210 3251 Standard loose jamb anchors are included in these prices; 3 per 9' 3135 3156 3188 3222 3265 jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 10' 3147 3166 3198 3234 3273 information is listed in the Engineered Frame Section. 6'8" 3091 3106 3146 3182 3219

DOUBLES 7' 3095 3114 3152 3188 3229 6' + 7'2' 3107 3118 3160 3192 3231 THRU 8' 3141 3154 3188 3224 3265 8'0" 9' 3145 3166 3204 3236 3279 Welding charge only per anchor Add 2 10' 3157 3176 3214 3248 3287 (Add for appropriate anchor)

NOTE: This product is manufactured offsite and ships separately EXTRAS Call to verify lead-times, freight cost, and ship schedule BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 27 RM Series Frames-14 Ga RF Shielded Frame RF Shielded Frame Prices May, 2018

EXTRAS EXTRAS HARDWARE PREPARATIONS DUTCH DOOR FRAME N/C CLOSER PREPARATIONS Concealed closer Add 184 Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Regular arm E10 Add 19 Single including 4'0" Add 35 Parallel arm E11 Add 19 Pairs over 4'0" Add 49 Half Sleeve E18 Add 26 Full Sleeve E17 Add 33 GALVANNEAL (A60) FRAME ADDS FLUSH BOLTS Price per 3 sided frame Add 36 Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 GALVANIZED (G-90) Reinforce only H1 Add 19 Price per 3 Sided frame Add 60 HINGE PREPARATIONS 3 1/2" 1 pair or 1 1/2 pair Standard 4 1/2" standard or heavyweight Standard 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 8'0" Standard 5" standard or heavyweight Add Each 4 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16 HOLDERS Overhead concealed Add 123 Overhead stop and holder surface mounted 14 ga Add 19 PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 28 RM Series Frames - 12 Ga. RF Shielded Frame RF Shielded Frame Prices May, 2018

3 1/2 6-1/8 8 10 12 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU CURRIES RM series frames are available double rabbet equal or 6 7-7/8 9-7/8 11-7/8 14 unequal, or single rabbet profile. Prices reflect hardware preparations for 1 3/4" doors. Refer to CURRIES 6'8" 3265 3284 3315 3352 3392 Architectural Technical Data Manual for standard details 7' 3271 3292 3323 3361 3402 and limitations. 1'6" 7'2" 3283 3296 3329 3365 3405 THRU 8' Miter, notch, and SW welding charges are included with these list 3'0" 3305 3321 3346 3386 3426 9' 3312 3333 3362 3397 3440 prices on this page. 10' 3324 3343 3372 3409 3449 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back bend. 6'8" 3274 3288 3322 3358 3397 7/16" N.A. SINGLES 7' 3280 3296 3330 3367 3407 3' + 7'2" 3292 3300 3336 3371 3410 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face THRU 8' 3314 3325 3353 3392 3431 frames are priced the same as 2" face at no extra charge. 4'0" 9' 3321 3337 3369 3403 3445 Jamb depth ranges are listed above each column. 10' 3333 3347 3379 3415 3454 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 6'8" 3312 3327 3361 3399 3436 available at no extra charge. 7' 3316 3335 3367 3405 3446 4' + 7'2" 3328 3339 3375 3409 3448 ANCHORS - foot clips are welded in place THRU Standard loose jamb anchors are included in these prices; 3 per 6'0" 8' 3362 3375 3403 3441 3482 9' 3366 3387 3419 3453 3496 jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 10' 3378 3397 3429 3465 3504 information is listed in the Engineered Frame Section. 6'8" 3322 3337 3377 3413 3450

DOUBLES 7' 3326 3345 3383 3419 3460 6' + 7'2' 3338 3349 3391 3423 3462 THRU 8' 3372 3385 3419 3455 3496 8'0" 9' 3376 3397 3435 3467 3510 Welding charge only per anchor Add 2 10' 3388 3407 3445 3479 3518 (Add for appropriate anchor)

NOTE: This product is manufactured offsite and ships separately EXTRAS Call to verify lead-times, freight cost, and ship schedule BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4

In order for this product to meet Buy American-type regulations, orders must reflect that they must meet “Buy American Act" or "Buy America Act”, as applicable. 29 RM Series Frames - 12 Ga RF Shielded Frame RF Shielded Frame Prices May, 2018

EXTRAS EXTRAS HARDWARE PREPARATIONS Dutch Door Frame N/C CLOSER PREPARATIONS Concealed closer Add 184 Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Regular arm E10 Add 19 Single including 4'0" Add 35 Parallel arm E11 Add 19 Pairs over 4'0" Add 49 Half Sleeve E18 Add 26 Full Sleeve E17 Add 33 GALVANNEAL (A60) FRAME ADDS FLUSH BOLTS Price per 3 sided frame Add 36 Standard ANSI 115.4 H2 Add 40 Reversible (strike plate included) H5 Add 40 GALVANIZED (G-90) Reinforce only H1 Add 19 Price per 3 Sided frame Add 60 HINGE PREPARATIONS 3 1/2" 1 pair or 1 1/2 pair Standard 4 1/2" standard or heavyweight Standard 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 8'0" Standard 5" standard or heavyweight Add Each 4 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16 HOLDERS Overhead concealed Add 123 Overhead stop and holder surface mounted 14 ga Add 19 PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 30 - 33 Stainless Steel Flush Door Prices 707 Series and 747 Series October, 2019

WIDTH HEIGHT 18 GA 16 GA 14 GA 12 GA STANDARD DESCRIPTION 20, 24, 26, 68 28, 210, 30 Polystyrene core with an "A" bevel 34, 36 68 Exposed seam "S" edge is standard on 18 ga. doors up to 9'0" 38, 310, 40 68 "T" edge standard on 10'0" 20, 24, 26, Welded "T" edge is standard on 16, 14, 12 ga. Doors 70 28, 210, 30 34, 36 70 EDGE BEVELS AVAILABLE 38, 310, 40 70 A standard (1/8" in 2" lock edge-square hinge edge)No Charge 20, 24, 26, 72 "B" specify (square both edges) No Charge 28, 210, 30 34, 36 72 FACTORY QUOTE ONLY "G" specify (1/8" in 2" bevel both edges) contact 38, 310, 40 72 Bull nose-one edge [email protected] 30 80 34, 36 80 OPTIONS 38, 310, 40 80 "T" continuous wire welded option-18 ga only up to 9'0" 30 90 34, 36 90 FINISH 38, 310, 40 90 Code 30 100 304-4 Brush finish SS STD 34, 36 100 304-6 Satin finish 46 38, 310, 40 100 304-8 Mirror finish 48 304-2B Paint grade finish 4M 304-XLB XL blend 4X NOTE: This product is manufactured offsite and ships separately 316-4 Brush finish 64 Call to verify lead-times, freight cost, and ship schedule 316-6 Satin finish 66 316-8 Mirror finish 68 316-2B Paint grade 6M 316-XLB XL blend 6X

NON STANDARD SIZE DOORS Price as the next largest standard size door

LISTED FIRE LABEL DOORS Label door restrictions per gauge and size can be determined in the current CURRIES product brochure. Prices are wihtout closer (CL). CL Underwirters Laboratories B and C 20 minute U.L. CORES Honeycomb Polyurethane 34 - 39 Stainless Steel Frames SSM Series Frames - 16, 14, and 12 Gauge October, 2019

3 1/2 6-1/8 8 10 12 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU CURRIES SSM series frame available in double 6 7-7/8 9-7/8 11-7/8 14 rabbet in single rabbet or cased opening. Prices reflect hardware preparations for 1 3/4" doors. Refer 6'8" to CURRIES Architectural Technical Data Manual 7' 1'6" for standard details and limitations. 7'2" THRU Miter, notch, and SW welding charges are included 3'0" 8' 9' with these list prices on this page. 10' NOTE: 5-3/4" jamb depth frames have 1/2" 6'8" minimum back bend. 7/16" N.A. SINGLES 7' 3' + 7'2" 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 THRU 8' 3/4" face 4'0" frames are priced the same as 2" face at no extra 9' FACTORY QUOTE ONLY charge. 10' contact 6'8" [email protected] Jamb depth ranges are listed above each column. 7' 1/8" increment jamb depths (all ranges 3 1/2" thru 4' + 7'2" THRU 8' Code 6'0" 9' 304-4 Brush finish SS STD 10' 304-6 Satin finish 46 6'8" 304-8 Mirror finish 48

DOUBLES 7' 304-2B Paint grade finish 4M 6' + 7'2' 304-XLB XL blend 4X THRU 8' 316-4 Brush finish 64 8'0" 9' 316-6 Satin finish 66 10' 316-8 Mirror finish 68 316-2B Paint grade 6M 316-XLB XL blend 6X NOTE:This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule ANCHORS - foot clips are welded in place Standard loose jamb anchors are included in these prices. 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor information is listed in the Engineered Frame Section Welding charge only per anchor (Add for appropriate anchor)

EXTRAS BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames LISTED FIRE LABELS 3-sided frames only (consult factory for details) reinforcement) Single frame Double frame NON STANDARD SIZE FRAMES Price as the next largest standard size frame 40 757 Series Doors-Steel Sound Retardant (STC) STC Flush Door Prices May, 2018 UP TO STC 41 WIDTH HEIGHT 18 GA 16 GA 14 GA STANDARD DESCRIPTION 20, 24, 26, 68 1596 1673 1994 28, 210, 30 Proprietary core with an "A" edge bevel and exposed 34, 36 68 1719 1796 2117 seam "S" edge is standard. 3/8" bottom undercut required. 38, 310, 40 68 1798 1875 2196 1 3/4" thick doors. Frames priced separately 20, 24, 26, STC label applied to door only 70 1608 1685 2006 28, 210, 30 34, 36 70 1732 1809 2130 Threshold and seal package included in door price and drop shipped 38, 310, 40 70 1812 1889 2210 diret from vendor. STC label included with door. 20, 24, 26, 72 1634 1711 2032 28, 210, 30 EDGE BEVELS AVAILABLE 34, 36 72 1746 1823 2144 A standard (1/8" in 2" lock edge-square hinge edge) No Charge 38, 310, 40 72 1829 1906 2227 OPTIONS 30 80 1781 1858 2179 Galvanneal steel (A60) Add 75 34, 36 80 1898 1975 2296 Galvanized (G90) Add 264 38, 310, 40 80 1973 2050 2371 "N" Seamless edge filled Add 68 30 90 2115 2192 2513 "T" Continuous wire welded Add 108 34, 36 90 2201 2278 2599 LISTED FIRE LABEL DOORS 38, 310, 40 90 2292 2369 2690 Label door restructions per gauge and size can be determined in the current product brochure

NOTES: LESS CL STC 55 maximum 80 height. 18 and 16 ga only Underwriters Laboratories A,B, C Add 47 STC 56-66 includes two doors. 16 ga only 20 minute W.H.I. Add 10 GLASS LITES - Refer to the Tech Data Manual for glass lite availability per rating NON STANDARD SIZE DOORS Prices are per door. For pairs, price two doors and add Price as the next largest standard size door accordingly for hardware preps EMBOSSED DOORS (M frame not included) Doors are crated for shipment. Larger orders are normally 6 Panel - 18, 16 ga. A40-2868 to 3070-up to STC 48 E6 Add 371 shipped 10 doors per crate 2 Panel-18 ga. A40-2868 to 3080-up to STC 47 2P, 2PA, 2PAP Add 371 STC RATINGS Up to STC41 All embossed doors, doors over STC 49 Pemko seal system included. M frame not inclued No Add and all doors with glass lites greater than 180 sq in. are manufactured offsite. STC42-46 Pemko seal system included. M frame not inclued Add 452 STC47-49 Pemko seal system included. M frame not inclued Add 1084 STC50-52 Pemko seal system included. M frame not inclued Add 1338 STC53-54 CAM seal system /cam hinges included. ADJ frame not included. Add 3242 STC55 (14 ga not available) Pemko seal system continuous hinge included-ST frame not included Add 4245 STC56-66 (14 ga not available) CAM Seal system/cam hinges included. CSM frame not included Add 7828 In order for this product to meet Buy American-type regulations, Per opening orders must reflect that they meet "Buy American CAM SEAL SYSTEM IN LIEU OF PEMKO SEAL SYSTEM (up to STC52) Act" or "Buy America Act”, as applicable. Required ADJ frame profile; CAM hinges included CAM Add 860 41 757S Series Doors -Sound Retardan (STC) STC Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Flat astragal screw (pair only) Add 65 Mortise lock 1 3/4" door escutcheon trimG3 Standard Mortise lock 1 3/4" door sectional trim G3A* Standard CLOSER Hotel and master ring cylinder functions Standard Surface mounted, reinforcement only Add 26 Mortise lock edge only preparation G3AEO Standard

Mortise lock reinforce only G3ARO Standard

FLUSH BOLTS OR SURFACE BOLTS Mortise panic exit G12* Add 56 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Rim panic reinforce only G11 Add 31 (when used without astragal or with flat bar astragal) Rim panic reinforce with function holes G11* Add 31 Top and bottom surface bolt reinforced only SB Add 41 Rim vertical rod reinforce only G11A Add 63 Rim vertical rod with function holes G11A* Add 63 HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard STRIKES 5" Hinge standard or heavyweightAdd Each 4 4 7/8" ANSI lipped strike 1 3/4" door E1 Add 43 1 1/2 pair up to and including 7'6" Standard 2 3/4" ANSI lipped strike 1 3/4" E2 Add 43 2 pair over 7'6" to 10'0" Standard 3 1/2" ANSI deadlock strike E3 Add 43 Anchor hinge set 2 3/4" ANSI deadlock strike E4 Add 43 (e.g. McKinney TA792) No drill, no tap Add 142 Electric strike E9* Add 80 (e.g. McKinney TA793) No Add Electric raceway Add 118 Continuous hinge preparation (mounting holes field drilled) Open back strike non label door * Add 89 Concealed mounting No Add *Advise of manufacturer and function of hardware. (e.g. McKinney - 11, 24) Hardware function holes do not include trim mounting holes 12 gauge hinge rail available (Specify) No Add Surface mounting UNDERCUTS (e.g. McKinney-21, 53) Add 74 1 3/4" doors-3/8" standard, 5/8", 3/4" available. No Add STC56-66 - 7/8" standard No Add LOCK PREPARATIONS All other undercuts per door Add 19 Cylindrical lock 1-3/4"” door 161 G2 Standard Cylindrical lock 1-3/4” door lever trim G2B* Standard VISION KITS - NON RATED (Universal lever trim prep ) Vision kits installed- glass included Deadlock 1 3/4” door tubular 181 G16Standard FV Add 1181 Deadlock 1 3/4" door mortise 190 G17 Add 66 FNV Add 1181 HG Add 1475 FG Add 2214 Not available on embossed doors

VISION KITS-FIRE RATED Vision kits installed- glass included FV Add 2951 FNV Add 2951 HG Add 3815 FG Add 5606 Not available on embossed doors 42 ADJ Series Frames - 14 Ga. STC Frame STC Frame Prices May, 2018

GENERAL INFORMATION 3 1/2 6-1/8 8 10 12 ADJ series frames are available in cased opening. Prices reflect WIDTH HEIGHT THRU THRU THRU THRU THRU hardware preparations for 1 3/4" doors. Refer to CURRIES 6 7-7/8 9-7/8 11-7/8 14 Architectural Technical Data Manual for standard details and limitations. 6'8" 669 686 716 752 790 Miter, notch, and FW welding charges are included with these list 7' 674 693 724 761 799 1'6" prices on this page. THRU 7'2" 685 697 729 765 802 3'0" NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back bend. 8' 706 721 747 785 823 7/16" N.A. 9' 713 733 762 795 836 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face SINGLES 6'8" 677 690 722 757 795 frames are priced the same as 2" face at no extra charge. 3' + 7' 682 697 730 766 804 THRU 7'2" 693 701 735 770 807 Jamb depth ranges are listed above each column. 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 4'0" 8' 714 725 753 790 828 available at no extra charge. 9' 721 737 768 800 841 6'8" 713 728 760 797 832 4' + 7' 717 734 766 803 842 ANCHORS - foot clips are welded in place THRU 7'2" 727 738 772 807 844 Standard loose jamb anchors are included in these prices. 6'0" 8' 759 774 802 837 878 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 9' 765 786 816 847 890 information is listed in the Engineered Frame Section 6'8" 723 738 775 811 846

DOUBLES 6' + 7' 727 744 781 817 856 Welding charge only per anchor Add 2 THRU 7'2' 737 748 787 821 858 (Add for appropriate anchor) 8'0" 8' 769 784 817 851 892 9' 775 796 831 861 904 EXTRAS BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F NOTE:This product is manufactured offsite and ships separately Welded Frames Add 4 Call to verify lead-times, freight cost, and ship schedule NON STANDARD SIZE FRAMES Price as the next largest standard size frame

For M frame pricing, refer to M frame section Up to STC 52

ST FRAME STC55Add to ADJ frame ST 198 6-3/4" min. jamb depth

CSM FRAME STC56-66Add to ADJ frame CS 240 11" min jamb depth

In order for this product to meet Buy American-type regulations, orders must reflect that they meet "Buy American Act" or "Buy America Act”, as applicable. 43 ADJ Series Frames - 14Ga STC Frame STC Frame Prices May, 2018

EXTRAS EXTRAS FOUR (4") INCH FACE HEADS HARDWARE PREPARATIONS Available for 1 3/4" door CLOSER PREPARATIONS Single including 4'0" Add 35 Regular arm E10 Add 19 Pairs over 4'0" Add 49 Parallel arm E11 Add 19 Half Sleeve E18 Add 26 GALVANNEAL (A60) FAME ADDS Full Sleeve E17 Add 33 Price per 3 sided frame Add 35 FLUSH BOLTS Standard ANSI 115.4 H2 Add 40 GALVANIZED (G-90) Reversible (strike plate included) H5 Add 40 Price per 3 Sided frame Add 60 Reinforce only H1 Add 19

FIRE FRAME LABBELS HINGE PREPARATIONS UNDERWRITERS LABORATORIES 3 1/2" 1 pair or 1 1/2 pair Standard Prices are less closer (CL) 4 1/2" standard or heavyweight Standard LESS 1 1/2 pair up to and including 7'6" Standard CL 2 pair over 7'6" to 8'0" Standard Single frame Add 17 5" standard or heavyweight Add Each 4 Double frame Add 34 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16 HOLDERS Overhead stop and holder surface mounted 14 ga Add 19

PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 44 780 Series Doors - Water Resistant Water Resistant Flush Door Prices May, 2018

WIDTH HEIGHT 16 GA 14 GA 12 GA STANDARD DESCRIPTION 20, 24, 26, 68 1156 1477 1666 28, 210, 30 Polystyrene core with an "A" bevel and continuous welded "T" edge is standard 34, 36 68 1283 1604 1793 1-3/4" Thick Door. A60 steel is standard 38, 310, 40 68 1366 1687 1876 20, 24, 26, 70 1169 1490 1679 28, 210, 30 EDGE BEVELS AVAILABLE 34, 36 70 1297 1618 1807 A standard (1/8" in 2" lock edge-square hinge edge) No Charge 38, 310, 40 70 1381 1702 1891 "B" specify (square both edges) No Charge 20, 24, 26, "G" specify (1/8" in 2" bevel both edges) Add 12 72 1196 1517 1706 28, 210, 30 34, 36 72 1312 1633 1822 OPTIONS 38, 310, 40 72 1398 1719 1908 Galvanized (G90) Add 189 30 80 1349 1670 1859 34, 36 80 1470 1791 1980 NON STANDARD SIZE DOORS 38, 310, 40 80 1548 1869 2058 Price as the next largest standard size door 30 90 1695 2016 2205 34, 36 90 1784 2105 2294 LISTED FIRE LABEL DOORS - NA 38, 310, 40 90 1879 2200 2389 30 100 1807 2128 2317 FITTED SEALS AND O-RINGS-BY OTHERS 34, 36 100 1884 2205 2394 38, 310, 40 100 1984 2305 2494 CORES Polyurethane Add 99

NOTE: This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they meet "Buy American Act" or "Buy America Act”, as applicable. 45 780 Series Doors - Water Resistant Water Resistant Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Flat astragal shipped loose (pair only) Add 39 Mortise lock 1 3/4" door escutcheon trimG3 Standard Mortise lock 1 3/4" door sectional trim G3A* Standard CAPS — top or bottom Hotel and master ring cylinder functions Standard

Steel installed flush (sealed) No Add Mortise lock edge only preparation G3AEO Standard Top or bottom cap welded Add 72 Mortise lock reinforce only G3ARO Standard Mortise panic exit G12* Add 56 CLOSER Rim panic reinforce only G11 Add 31 Surface mounted, reinforcement only Add 26 Rim panic reinforce with function holes G11* Add 31 Rim vertical rod reinforce only G11A Add 63 FLUSH BOLTS OR SURFACE BOLTS Rim vertical rod with function holes G11A* Add 63 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Concealed vertical rods G12A* Add 423 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Add 43 HINGE PREPARATIONS 2 3/4" ANSI lipped strike 1 3/4" E2 Add 43 4 1/2" standard or heavyweight Standard 3 1/2" ANSI deadlock strike E3 Add 43 5" Hinge standard or heavyweightAdd Each 4 2 3/4" ANSI deadlock strike E4 Add 43 1 1/2 pair up to and including 7'6"Standard Electric strike E9* Add 80 2 pair over 7'6" to 10'0" Standard Electric raceway Add 118 Anchor hinge set Open back strike non label door * Add 85 (e.g. McKinney TA792) No drill, no tap Add 142 *Advise of manufacturer and function of hardware. (e.g. McKinney TA793) No Add Hardware function holes do not include trim mounting holes Continuous hinge preparation (mounting holes field drilled) Concealed mounting No Add UNDERCUTS (e.g. McKinney - 11, 24) 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add 12 gauge hinge rail available (Specify)No Add All other undercuts per door Add 19 Surface mounting (e.g. McKinney-21, 53) Add 74 VISION KITS Vision kits installed- glass by others (specify glass thickness) LOCK PREPARATIONS 1/4" thick glass standard Cylindrical lock 1-3/4"” door 161 G2Standard FV Add 844 Cylindrical lock 1-3/4” door lever trim G2B*Standard FNV Add 844 (Universal lever trim prep ) HG Add 844 Deadlock 1 3/4” door tubular 181 G16Standard FG Add 1265 Deadlock 1 3/4" door mortise 190 G17 Add 66 Add for other glass thickness up to 1" Add 97 Interconnected lock G25 Add 43 46 787 Series Doors - Steel Stiffened Water Resistant Water Resistant Flush Door Prices

May, 2018

WIDTH HEIGHT 16 GA 14 GA 12 GA STANDARD DESCRIPTION 20, 24, 26, Steel Stiffened core with an "A" bevel and continuous welded "T" edge is 68 1255 1576 1765 28, 210, 30 standard 34, 36 68 1382 1703 1892 A60 steel is standard 38, 310, 40 68 1465 1786 1975 1-3/4" Thick Door 20, 24, 26, 70 1268 1589 1778 28, 210, 30 EDGE BEVELS AVAILABLE 34, 36 70 1396 1717 1906 "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge 38, 310, 40 70 1480 1801 1990 "B" specify (square both edges) No Charge 20, 24, 26, "G" specify (1/8" in 2" bevel both edges) Add 12 72 1295 1616 1805 28, 210, 30 34, 36 72 1411 1732 1921 OPTIONS 38, 310, 40 72 1497 1818 2007 Galvanized (G90) Add 189 30 80 1448 1769 1958 34, 36 80 1569 1890 2079 NON STANDARD SIZE DOORS 38, 310, 40 80 1647 1968 2157 Price as the next largest standard size door 30 90 1794 2115 2304 34, 36 90 1883 2204 2393 LISTED FIRE LABEL DOORS - NA 38, 310, 40 90 1978 2299 2488 30 100 1906 2227 2416 FITTED SEALS AND O-RINGS-BY OTHERS 34, 36 100 1983 2304 2493 38, 310, 40 100 2083 2404 2593

NOTE: This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they meet "Buy American Act" or "Buy America Act”, as applicable. 47 787 Series Doors - Steel Stiffened Water Resistant Water Resistant Flush Door Prices May, 2018

EXTRAS EXTRAS ASTRAGALS LOCK PREPARATIONS CONTINUED Flat astragal shipped loose (pair only) Add 39 Mortise lock 1 3/4" door escutcheon trimG3 Standard Mortise lock 1 3/4" door sectional trim G3A* Standard CAPS — top or bottom Hotel and master ring cylinder functions Standard Steel installed flush (sealed) No Add Mortise lock edge only preparation G3AEO Standard Top or bottom cap welded Add 72 Mortise lock reinforce only G3ARO Standard Mortise panic exit G12* Add 56 CLOSER Rim panic reinforce only G11 Add 31 Surface mounted, reinforcement only Add 26 Rim panic reinforce with function holes G11* Add 31 Rim vertical rod reinforce only G11A Add 63 FLUSH BOLTS OR SURFACE BOLTS Rim vertical rod with function holes G11A* Add 63 Top and bottom flush bolt ANSI A115.4 H1 Add 61 Concealed vertical rods G12A* Add 423 (when used without astragal or with flat bar astragal) Top and bottom surface bolt reinforced only SB Add 41 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Add 43 HINGE PREPARATIONS 2 3/4" ANSI lipped strike 1 3/4" E2 Add 43 4 1/2" standard or heavyweight Standard 3 1/2" ANSI deadlock strike E3 Add 43 5" Hinge standard or heavyweightAdd Each 4 2 3/4" ANSI deadlock strike E4 Add 43 1 1/2 pair up to and including 7'6" Standard Electric strike E9* Add 80 2 pair over 7'6" to 10'0" Standard Electric raceway Add 118 Anchor hinge set Open back strike non label door * Add 89 (e.g. McKinney TA792) No drill, no tap Add 142 *Advise of manufacturer and function of hardware. (e.g. McKinney TA793) No Add Hardware function holes do not include trim mounting holes Continuous hinge preparation (mounting holes field drilled) Concealed mounting No Add UNDERCUTS (e.g. McKinney - 11, 24) 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add 12 gauge hinge rail available (Specify)No Add All other undercuts per door Add 19 Surface mounting (e.g. McKinney-21, 53) Add 74 VISION KITS Vision kits installed- glass by others (specify glass thickness) LOCK PREPARATIONS 1/4" thick glass standard Cylindrical lock 1-3/4"” door 161 G2Standard FV Add 844 Cylindrical lock 1-3/4” door lever trim G2B*Standard FNV Add 844 (Universal lever trim prep ) HG Add 844 Deadlock 1 3/4” door tubular 181 G16Standard FG Add 1265 Deadlock 1 3/4" door mortise 190 G17 Add 66 Add for other glass thickness up to 1" Add 97 Interconnected lock G25 Add 43 48 WRM Series Frames - 16 Ga. Water Resistant Water Resistant Frame Prices May, 2018

6-1/8 8 10 12 GENERAL INFORMATION 3 1/2 CURRIES WRM series frames are available double rabbet, equal or WIDTH HEIGHT THRU THRU THRU THRU THRU 6 unequal, single rabbet profile or cased opening. Prices reflect 7-7/8 9-7/8 11-7/8 14 hardware preparations for 1 3/4" doors. Refer to CURRIES 6'8" 816 834 865 903 943 Architectural Technical Data Manual for standard details and limitations. 7' 821 841 874 911 952 1'6" 7'2" 833 846 879 916 956 THRU Miter, notch, and FW welding charges are included with these list 8' prices on this page. 3'0" 855 870 897 937 977 9' 862 882 912 948 991 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back bend. 10' 874 893 922 959 999 7/16" N.A. 6'8" 825 839 871 908 948 SINGLES 7' 830 846 880 916 957 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face 3' + frames are priced the same as 2" face at no extra charge. 7'2" 842 851 885 921 961 THRU 8' 864 875 903 942 982 4'0" Jamb depth ranges are listed above each column. 9' 871 887 918 953 996 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are available at no extra charge. 10' 883 898 928 964 1004 6'8" 861 879 911 948 986 7' 865 885 919 954 996 4' + 7'2" 877 889 925 960 1000 ANCHORS - foot clips are welded in place THRU 8' 911 925 955 992 1034 Standard loose jamb anchors are included in these prices. 6'0" 9' 915 937 969 1002 1046 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 10' 927 947 979 1014 1054 information is listed in the Engineered Frame Section 6'8" 872 888 927 963 1000

DOUBLES 7' 876 894 935 969 1010 Welding charge only per anchor Add 2 6' + 7'2' 888 898 941 975 1014 (Add for appropriate anchor) THRU 8' 922 834 971 1007 1048 8'0" 9' 926 946 985 1017 1060 EXTRAS 10' 938 956 995 1029 1068 BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4 NOTE:This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they meet "Buy American Act" or "Buy America Act”, as applicable. 49 WRM Series Frames - 16 Ga Water Resistant Water Resistant Frame Prices May, 2018

EXTRAS EXTRAS DUTCH DOOR FRAME N/C HARDWARE PREPARATIONS CLOSER PREPARATIONS Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB Regular arm E10 Add 19 DEPTH Single including 4'0" Add 35 Parallel arm E11 Add 19 Pairs over 4'0" Add 49 Half Sleeve E18 Add 26 Full Sleeve E17 Add 33 GALVANNEAL (A60) NO ADDStandard FLUSH BOLTS Standard ANSI 115.4 H2 Add 40 GALVANIZED (G-90) Reversible (strike plate included) H5 Add 40 Price per 3 Sided frame Add 24 Reinforce only H1 Add 19

CASED OPENING FRAMES HINGE PREPARATIONS Price per frame Add 12 3 1/2" 1 pair or 1 1/2 pair Standard 4 1/2" standard or heavyweight Standard 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 8'0" Standard 5" standard or heavyweightAdd Each 4 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16 HOLDERS Overhead stop and holder surface mounted 14 ga Add 19

PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 50 WRM Series Frames - 14 Ga. Water Resistant Water Resistant Frame Prices May, 2018

GENERAL INFORMATION 1 6-1/8 8 10 12 3 1/2 CURRIES WRM series frames are available double rabbet, equal WIDTH HEIGHT THRU THRU THRU THRU THRU 6 or unequal, single rabbet profile or cased opening. Prices reflect 7-7/8 9-7/8 11-7/8 14 hardware preparations for 1 3/4" doors. Refer to CURRIES 6'8" 864 882 913 951 991 Architectural Technical Data Manual for standard details and limitations. 7' 869 889 922 959 1000 1'6" 7'2" 881 894 927 964 1004 THRU Miter, notch, and FW welding charges are included with these list 8' 3'0" 903 918 945 985 1025 prices on this page. 9' 910 930 960 996 1039 10' 922 941 970 1007 1047 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back bend. 6'8" 873 887 919 956 996 7/16" N.A. SINGLES 7' 878 894 928 964 1005 3' + 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face 7'2" 890 899 933 969 1009 THRU frames are priced the same as 2" face at no extra charge. 8' 912 923 951 990 1030 4'0" 9' 919 935 966 1001 1044 Jamb depth ranges are listed above each column. 10' 931 946 976 1012 1052 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 6'8" 909 927 959 996 1034 available at no extra charge. 7' 913 933 967 1002 1044 4' + 7'2" 925 937 973 1008 1048 ANCHORS - foot clips are welded in place THRU 8' 6'0" 959 973 1003 1040 1082 Standard loose jamb anchors are included in these prices. 9' 963 985 1017 1050 1094 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 10' 975 995 1027 1062 1102 information is listed in the Engineered Frame Section 6'8" 920 936 975 1011 1048

DOUBLES 7' 924 942 983 1017 1058 Welding charge only per anchor Add 2 6' + 7'2' 936 946 989 1023 1062 (Add for appropriate anchor) THRU 8' 970 882 1019 1055 1096 8'0" 9' 974 994 1033 1065 1108 EXTRAS 10' 986 1004 1043 1077 1116 BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4 NOTE:This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they meet "Buy American Act" or "Buy America Act”, as applicable. 51 WRM Series Frames - 14Ga Water Resistant Water Resistant Frame Prices May, 2018

EXTRAS EXTRAS DUTCH DOOR FRAME N/C HARDWARE PREPARATIONS CLOSER PREPARATIONS Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Regular arm E10 Add 19 Single including 4'0" Add 35 Parallel arm E11 Add 19 Pairs over 4'0" Add 49 Half Sleeve E18 Add 26 Full Sleeve E17 Add 33 GALVANNEAL (A60) NO ADD Standard FLUSH BOLTS Standard ANSI 115.4 H2 Add 40 GALVANIZED (G-90) Reversible (strike plate included) H5 Add 40 Price per 3 Sided frame Add 24 Reinforce only H1 Add 19

CASED OPENING FRAMES HINGE PREPARATIONS Price per frame Add 12 3 1/2" 1 pair or 1 1/2 pair Standard 4 1/2" standard or heavyweight Standard 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 8'0" Standard 5" standard or heavyweight Add Each 4 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16 HOLDERS Overhead stop and holder surface mounted 14 ga Add 19

PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 52 WRM Series Frames - 12 Ga. Water Resistant Water Resistant Frame Prices May, 2018

GENERAL INFORMATION 6-1/8 8 10 12 3 1/2 CURRIES WRM series frames are available double rabbet, equal WIDTH HEIGHT THRU THRU THRU THRU THRU 6 or unequal, single rabbet profile or cased opening. Prices reflect 7-7/8 9-7/8 11-7/8 14 hardware preparations for 1 3/4" doors. Refer to CURRIES 6'8" 1095 1113 1144 1182 1222 Architectural Technical Data Manual for standard details and limitations. 7' 1100 1120 1153 1190 1231 1'6" 7'2" 1112 1125 1158 1195 1235 THRU Miter, notch, and FW welding charges are included with these list 8' 3'0" 1134 1149 1176 1216 1256 prices on this page. 9' 1141 1161 1191 1227 1270 10' 1153 1172 1201 1238 1278 NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back bend. 6'8" 1104 1118 1150 1187 1227 7/16" N.A. SINGLES 7' 1109 1125 1159 1195 1236 3' + 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face 7'2" 1121 1130 1164 1200 1240 THRU frames are priced the same as 2" face at no extra charge. 8' 1143 1154 1182 1221 1261 4'0" 9' 1150 1166 1197 1232 1275 Jamb depth ranges are listed above each column. 10' 1162 1177 1207 1243 1283 1/8" increment jamb depths (all ranges 3 1/2" thru 14") are 6'8" 1140 1158 1190 1227 1265 available at no extra charge. 7' 1144 1164 1198 1233 1275 4' + 7'2" 1156 1168 1204 1239 1279 ANCHORS - foot clips are welded in place THRU 8' 6'0" 1190 1204 1234 1271 1313 Standard loose jamb anchors are included in these prices. 9' 1194 1216 1248 1281 1325 3 per jamb up to 7'6" and 4 per jamb over 7'6". Complete anchor 10' 1206 1226 1258 1293 1333 information is listed in the Engineered Frame Section 6'8" 1151 1167 1206 1242 1279

DOUBLES 7' 1155 1173 1214 1248 1289 Welding charge only per anchor Add 2 6' + 7'2' 1167 1177 1220 1254 1293 (Add for appropriate anchor) THRU 8' 1201 1113 1250 1286 1327 8'0" 9' 1205 1225 1264 1296 1339 EXTRAS 10' 1217 1235 1274 1308 1347 BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames Add 4 NOTE:This product is manufactured offsite and ships separately Call to verify lead-times, freight cost, and ship schedule

In order for this product to meet Buy American-type regulations, orders must reflect that they meet "Buy American Act" or "Buy America Act”, as applicable. 53 WRM Series Frames - 12 Ga Water Resistant Water Resistant Frame Prices May, 2018

EXTRAS EXTRAS DUTCH DOOR FRAME HARDWARE PREPARATIONS N/C

CLOSER PREPARATIONS Four (4") INCH FACE HEADS (4-5/8" MIN) JAMB DEPTH Regular arm E10 Add 19 Single including 4'0" Add 35 Parallel arm E11 Add 19 Pairs over 4'0" Add 49 Half Sleeve E18 Add 26 Full Sleeve E17 Add 33 GALVANNEAL (A60) NO ADD Standard FLUSH BOLTS Standard ANSI 115.4 H2 Add 40 GALVANIZED (G-90) Reversible (strike plate included) H5 Add 40 Price per 3 Sided frame Add 24 Reinforce only H1 Add 19

CASED OPENING FRAMES HINGE PREPARATIONS Price per frame Add 12 3 1/2" 1 pair or 1 1/2 pair Standard 4 1/2" standard or heavyweight Standard 1 1/2 pair up to and including 7'6" Standard 2 pair over 7'6" to 8'0" Standard 5" standard or heavyweight Add Each 4 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16 HOLDERS Overhead stop and holder surface mounted 14 ga Add 19

PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56 PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47 STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) SURFACE BOLTS Reinforcement only Add 19 54 707 Series Doors-Attack Resistant Door with Glass - Non Rated Attack Resistant Door Prices April, 2019

WIDTH HEIGHT 16 GA 14 GA STANDARD DESCRIPTION Polystyrene core core with an "A" edge bevel and exposed seam "S" 28, 210, 30 68 645 800 edge are standard 34, 36 68 768 915 1-3/4" Thick Door 38, 310, 40 68 862 1007 28, 210, 30 70 679 842 EDGE BEVELS AVAILABLE 34, 36 70 783 954 "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge 38, 310, 40 70 879 1046 28, 210, 30 72 722 873 OPTIONS 34, 36 72 790 982 Galvanized (A60) Add 68 38, 310, 40 72 890 1074 Galvanized (G90) includes epoxy primer Add 264 30 80 889 1110 "N" Seamless edge filled Add 68 34, 36 80 957 1201 "T" Continuous Wire Welded Add 108 38, 310, 40 80 1034 1271 12 Gauge Hinge Rail No Charge Visual ID tag Add 4 NOTE: Honeycomb core Add 31 Door tested to 5aa 10 test method. Single doors only. Polyurethane core Add 99 Lock type (lock by others): Equivilant hardware not test. Sargent 8200 mortise lock with latch bolt, dead bolt function and LS escutcheon LISTED FIRE LABEL DOORS - Not Available Corbin Russwin ML2000 series mortise lock with deadbolt, VR escutcheon and lever trim NON STANDARD SIZE DOORS Yale SL8800 series mortise lock with deadbolt, SL escutcheon and lever trim Price as the next largest standard size door

Door glass size (visible): width 3" minimum; 35-13/16" maximum - VISION KITS-TYPE 2 STANDARD WITH SURROUND CHANNEL height 10" minimum; 44" maximum. FV Add 205 FNV Add 231 Sidelight glass size (visible): 12" x 12" - 47" x 92-3/4" HG Add 242 Attack resistant glass must be factory installed Borrowed light glass size (visible): 12" x 12" - 95" x 47" horizontal oriented or 12" x 12" - 95" x 47" vertical oreiented. VISION KITS-TYPE 10 WITH SURROUND CHANNEL FV Add 205 For 3F frames: Refer to the M or CM sesries frame section - KD or welded FNV Add 231 Jambs 2" face, Head 2" - 4" face. HG Add 242 For sidelite/borrowed lite frame: Refer to the CCW section for Attack resistant glass must be factory installed elevations. Jambs 2" face, mullion 2" face, sill 2" - 10" face GLASS - FACTORY INSTALLED IN DOORS FV ARG Add 747 FNV ARG Add 747 HG ARG Add 1330 Attack resistant glass Min. visible glass width 3"; Max. width 35--13/16" Min. visible glass height 10"; Max. height 44"

FRAMES - GLASS ATTACK RESISTANT Attack resistant glass for sidelight/borrowed lights (minimum 3 sq. ft) ships looseAdd per sq. ft 146 NOTE: Call for glass lead time. Sidelight and borrowed light glass is included but shipped loose for field installation by others per installation instructions provided with the SG5™ glass 55 707 Series Doors -Attack Resistant Door with Glass Non Rated Attack Resistant Door Prices May, 2018

EXTRAS EXTRAS CAPS — top or bottom LOCK PREPARATIONS CONTINUED Steel installed flush (with screws per cap) Add 19 Mortise lock 1 3/4" door sectional trim G3A* Standard

CLOSER UNDERCUTS Surface mounted, reinforcement only Add 26 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add Concealed or semi-concealed Add 237 All other undercuts up to 3/4" Add 19

HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard Continuous hinge preparation (mounting holes field drilled) Concealed mounting No Add 56 Attack Resistant Retro-Fit Kits Attack Resistant Prices April, 2019

Retro-Fit Kit includes: Attack Resistant glass kit, SG5 glass, tape and glazing compound for installation into existing metal or wood doors. Kit and glass shipped loose and installed by others.

TYPE 2 HM Door Visible Glass Size Cutout Size Part Number Unit List ARKMV 10 X 10 11-3/4 x 11-3/4 CD149692 $580 ARKMV1212 12 X 12 13-3/4 x 13-3/4 CD150402 $580 ARKMNV616 6 X 16 7-3/4 x 17-3/4 CD151232 $580 ARKMNV636 6 X 36 7-3/4 x 37-3/4 CD152062 $580 ARKMNV333 3 X 33 4-3/4 x 34-3/4 CD154462 $580 ARKMNV424 4 X 24 5-3/4 x 25-3/4 CD155292 $580 ARKMNV520 5 X 20 6-3/4 x 21-3/4 CD156022 $580 ARKMNV624 6 X 24 7-3/4 x 25-3/4 CD156852 $580 ARKMNV630 6 X 30 7-3/4 x 31-3/4 CD157682 $580 ARKMNV425 4 X 25 5-3/4 x 26-3/4 CD158422 $580 ARKMHG (3068) 23-13/16 X 28 25-9/16 x 29-3/4 CD159252 $969 ARKMHG (3070) 23-13/16 X 32 25-9/16 X 33-3/4 CD160062 $969 ARKMHG (3072) 23-13/16 X 34 25-9/16 X 35-3/4 CD160892 $969 ARKMC Custom Size Retro-Fit kits are priced per Sq. Ft. of visible glass ( 3 sq ft min.) $201

TYPE 10 Wood Door Visible Glass Size Cutout Size Part Number Unit List ARKWV 10 X 10 12-1/8 x 12-1/8 CD137632 $580 ARKWV1212 12 X 12 14-1/8 x 14-1/8 CD138472 $580 ARKWNV616 6 X 16 8-1/8 x 18-1/8 CD139202 $580 ARKWNV636 6 X 36 8-1/8 x 38-1/8 CD140012 $580 ARKWNV333 3 X 33 5-1/8 x 35-1/8 CD142412 $580 ARKWNV424 4 X 24 6-1/8 x 26-1/8 CD143242 $580 ARKWNV520 5 X 20 7-1/8 x 22-1/8 CD144072 $580 ARKWNV624 6 X 24 8-1/8 x 26-1/8 CD144802 $580 ARKWNV630 6 X 30 8-1/8 x 32-1/8 CD145632 $580 ARKWNV425 4 X 25 6-1/8 x 27-1/8 CD146472 $580 ARKWHG (3068) 23-5/16 X 27-1/4 25-7/16 x 29-3/8 CD147202 $969 ARKWHG (3070) 23-5/16 X 31-1/4 25-7/16 x 33-3/8 CD148032 $969 ARKWHG (3072) 23-5/16 X 33-1/4 25-7/16 x 35-3/8 CD148862 $969 ARKWC Custom Size Retro-Fit kits are priced per Sq. Ft. of visible glass ( 3 sq ft min.) $201

Attack Resistant Retro-fit Kits must be used with the Attack Resistant component materials as supplied: AADG Kits, SGG5 Glass, approved and tested installation components only - NO SUBSTITUTIONS.

Curries and School Guard Glass are committed to providing the safest and most robust means and methods for attachment into complete factory installed OEM Attack Resistant assemblies as well as the repair, partial replacement or enhancement of existing doors and frames. We have independent testing parties regularly test our installation procedures and products as well as the frames and glass it is installed into. However, please be advised that it is possible that not all existing doors, frames, or hardware on your project have been tested to our standards. Furthermore, if doors, windows or hardware are old, of inferior quality, broken or partially broken, then they may not meet the testing outcomes that new materials meet. Our products will not cause your existing products to be less secure, but existing products that are defective may reduce the ability of our products to meet their full potential.

NOTE: Call for glass lead time. 57 Notes

August, 2018 58 707 Series Doors-Attack Resistant Door with Glass - Fire Rated Attack Resistant Door Prices April, 2019

WIDTH HEIGHT 16 GA 14 GA STANDARD DESCRIPTION Polystyrene core core with an "A" edge bevel and exposed seam "S" 28, 210, 30 68 645 800 edge are standard 34, 36 68 768 915 1-3/4" Thick Door 38, 310, 40 68 862 1007 28, 210, 30 70 679 842 EDGE BEVELS AVAILABLE 34, 36 70 783 954 "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge 38, 310, 40 70 879 1046 28, 210, 30 72 722 873 OPTIONS 34, 36 72 790 982 Galvanized (A60) Add 68 38, 310, 40 72 890 1074 Galvanized (G90) includes epoxy primer Add 264 30 80 889 1110 "N" Seamless edge filled Add 68 34, 36 80 957 1201 "T" Continuous Wire Welded Add 108 38, 310, 40 80 1034 1271 12 Gauge Hinge Rail No Charge Visual ID tag Add 4 NOTE: Honeycomb core Add 31 Door tested to 5aa 10 test method. Single doors only. Polyurethane core Add 99 Lock type (lock by others): Equivilant hardware not test. Sargent 8200 mortise lock with latch bolt, dead bolt function and LS escutcheon Warnock Hersey B, C, 20 min Add 10 Corbin Russwin ML2000 series mortise lock with deadbolt, VR escutcheon and lever trim NON STANDARD SIZE DOORS Yale SL8800 series mortise lock with deadbolt, SL escutcheon and lever trim Price as the next largest standard size door

Door glass size (visible): width 3" - 35-13/16" x height 10" - 44" VISION KIT-TYPE 8 FV Add 318 Multiple sidelight and borrowed light sizes available. FNV Add 396 HG Add 484 For 3F frames: Refer to the M or CM sesries frame section - KD or welded Attack resistant glass must be factory installed, see options below Jambs 2" face, Head 2" - 4" face. For sidelite/borrowed lite frame: Refer to the CCW section for GLASS ATTACK RESISTANT Installed 20 min rated elevations. Jambs 2" face, mullion 2" face, sill 2" - 10" face FV ARG20 Add 2328 FNV ARG20 Add 2373 HG ARG20 Add 4880 FRAMES - GLASS ATTACK RESISTANT Attack resistant glass for sidelight/borrowed lights (minimum 3 sq. ft) GLASS ATTACK RESISTANT Installed 45 min rated ships loose Add per sq ft FV ARG45 Add 2328 20 575 FNV ARG45 Add 2373 45 575 HG ARG45 Add 4880 60 741 90 951 GLASS ATTACK RESISTANT Installed 60 min rated Sidelight and borrowed light glass is included but shipped loose for FV ARG60 Add 2838 field installed by others per installation instructions provided with FNV ARG60 Add 2997 the SG5™ glass. HG ARG60 Add 5802

GLASS ATTACK RESISTANT Installed 90 min rated FV ARG90 Add 2906 NOTE: Call for glass lead time. FNV ARG90 Add 5238 HG ARG90 Add 8269 59 707 Series Doors -Attack Resistant Door with Glass Fire Rated Attack Resistant Door Prices January,2019

EXTRAS EXTRAS CAPS — top or bottom LOCK PREPARATIONS CONTINUED Steel installed flush (with screws per cap) Add 19 Mortise lock 1 3/4" door sectional trim G3A* Standard

CLOSER UNDERCUTS Surface mounted, reinforcement only Add 26 1 3/4" doors-5/8" standard, 3/8", 3/4" available. No Add Concealed or semi-concealed Add 237 All other undercuts up to 3/4" Add 19

HINGE PREPARATIONS 4 1/2" standard or heavyweight Standard Continuous hinge preparation (mounting holes field drilled) Concealed mounting No Add 60 859 Series Doors-Forced Entry Level 8 Bullet Resistant Door Forced Entry Door Prices May, 2018

WIDTH HEIGHT 12 GA STANDARD DESCRIPTION

30 70 Factory Quoted Proprietary core construction. Continuous welded "T" edge is standard 1-3/4" Thick Doors Submit quote to - [email protected]

Door tested per DoS ST-STD.01.01 EDGE BEVELS AVAILABLE Single and pairs available. "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge Available in 5 minute, 15 minute and 60 minute assemblies. OPTIONS Galvanneal steel (A60) Galvanized (G90) includes epoxy primer

LISTED FIRE LABEL DOORS - Not Available

VISION KITS - Not Available

NOTE: This product is manufactured offsite and ships separately EXTRAS Call to verify lead-times, freight cost, and ship schedule CAPS - top and bottom Standard

CLOSER Surface mounted, reinforcement only

UNDERCUTS 1 3/4" doors-3/4" standard 61 FEM Series 12 ga - Forced Entry Level 8 Bullet Resistant Frame Forced Entry Frame Prices May, 2018

5 3/4 6-1/8 8 10 12 GENERAL INFORMATION WIDTH HEIGHT THRU THRU THRU THRU THRU CURRIES FEM series frames are available double rabbet, equal or unequal, Prices reflect hardware preparations for 6 7-7/8 9-7/8 11-7/8 14 Forced Entry Bullet Resistant door and frame assembly. Refer to CURRIES Architectural Technical Data Manual for standard details and limitations. 30 7' Factory Quoted Miter, notch, and FW welding charges are included with these list prices on this page. SINGLES

NOTE: 5-3/4 " jamb depth frames have 1/2" minimum back Submit Quote to: [email protected] bend. 7/16" N.A.

2" face frames are standard. NOTE:This product is manufactured offsite and ships separately 1" stop height standard Call to verify lead-times, freight cost, and ship schedule Jamb depth ranges are listed above each column. 1/8" increment jamb depths (all ranges 5 3/4" thru 14") are available at no extra charge.

ANCHORS - existing opening

OPTIONS Galvanneal steel (A60) per 3 sided frame Galvanized (G90) per 3 sided frame

EXTRAS BUNDLING AND TAGGING FRAMES Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F Welded Frames

CLOSER REINFORCEMENT - Not available FOUR (4") INCH FACE HEAD - Not Available FIRE RATING - Not Available 62 789 Series Doors - Steel Stiffened Flood Resistant Flood Resistant Flush Door Prices May, 2018

WIDTH HEIGHT 16 GA 14 GA 12 GA STANDARD DESCRIPTION 20, 24, 26, 68 2698 3019 3208 Steel stiffened core core with an "A" bevel and continuous "T" edge is 28, 210, 30 standard. A60 steel is standard 20, 24, 26, 1-3/4" Thick Door 70 2710 3031 3220 28, 210, 30

Available in seated position only (water pressure on pull side of door). EDGE BEVELS AVAILABLE "A" standard (1/8" in 2" lock edge-square hinge edge) No Charge "B" specify (square both edges) No Charge NOTE: This product is manufactured offsite and ships separately "G" specify (1/8" in 2" bevel both edges) Add 12 Call to verify lead-times, freight cost, and ship schedule OPTIONS Galvanized (G90) Add 189

NON STANDARD SIZE DOORS Price as the next largest standard size door

LISTED FIRE LABEL DOORS - NA 63 789 Series Doors - Steel Stiffened Flood Resistant Flood Resistant Flush Door Prices May, 2018

EXTRAS EXTRAS CAPS — top or bottom LOCK PREPARATIONS CONTINUED Top and bottom cap welded No Add Mortise lock 1 3/4" door escutcheon trimG3 Standard Mortise lock 1 3/4" door sectional trim G3A* Standard

CLOSER Hotel and master ring cylinder functions Standard

Surface mounted, reinforcement only Add 26 Mortise lock edge only preparation G3AEO Standard Mortise lock reinforce only G3ARO Standard HINGE PREPARATIONS Mortise panic exit G12* Add 56 4 1/2" standard or heavyweight Standard Rim panic reinforce only G11 Add 31 5" Hinge standard or heavyweightAdd Each 4 Rim panic reinforce with function holes G11* Add 31 1 1/2 pair up to and including 7'6" Standard Rim vertical rod reinforce only G11A Add 63 Anchor hinge set Rim vertical rod with function holes G11A* Add 63 (e.g. McKinney TA792) No drill, no tap Add 142 Concealed vertical rods G12A* Add 423 (e.g. McKinney TA793) No Add Continuous hinge preparation (mounting holes field drilled) UNDERCUTS Concealed mounting No Add 1 3/4" doors-1/8" standard No Add (e.g. McKinney - 11, 24) 12 gauge hinge rail available (Specify) No Add Surface mounting VISION KITS (e.g. McKinney-21, 53) Add 74 Vision kits installed- glass by others (specify glass thickness) 1/4" thick glass standard LOCK PREPARATIONS FV Add 844 Cylindrical lock 1-3/4"” door 161 G2Standard Add for other glass thickness up to 1" Add 97 Cylindrical lock 1-3/4” door lever trim G2B* Standard (Universal lever trim prep ) Deadlock 1 3/4” door tubular 181 G16 Standard Deadlock 1 3/4" door mortise 190 G17 Add 66 Interconnected lock G25 Add 43 64 FRM Series Frames - 14 Ga. Flood Resistant Flood Resistant Frame Prices May, 2018

GENERAL INFORMATION 5 7/8 6-1/8 8 10 12 CURRIES FRM series frames are available double rabbet. WIDTH HEIGHT THRU THRU THRU THRU THRU Prices reflect hardware preparations for 1 3/4" doors. Refer to 6 7-7/8 9-7/8 11-7/8 14 CURRIES Architectural Technical Data Manual for standard details and limitations.

6'8" 1358 1380 1418 1464 1511 2'0" Miter, notch, and FW welding charges are included with these list prices on this page. THRU 3'0" SINGLES 7' 1363 1387 1426 1472 1520 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face frames are priced the same as 2" face at no extra charge.

Jamb depth ranges are listed above each column. 1/8" increment jamb depths (all ranges 5 7/8" thru 14") are NOTE:This product is manufactured offsite and ships separately available at no extra charge. Call to verify lead-times, freight cost, and ship schedule

ANCHORS - foot clips are welded in place Standard loose jamb anchors are included in these prices. 3 per jamb up to 7'6". Complete anchor information is listed in the Engineered Frame Section

Welding charge only per anchor Add 2 (Add for appropriate anchor)

EXTRAS BUNDLING AND TAGGING FRAMES Frame Order Code 4F Welded Frames Add 4

In order for this product to meet Buy American-type regulations, orders must reflect that they meet "Buy American Act" or "Buy America Act”, as applicable. 65 FRM Series Frames - 14 Ga Flood Resistant Flood Resistant Frame Prices May, 2018

EXTRAS EXTRAS FOUR (4") INCH FACE HEADS JAMB DEPTH CLOSER PREPARATIONS Single including 4'0" Add 35 Regular arm E10 Add 19 Parallel arm E11 Add 19 GALVANNEAL (A60) NO ADD Standard HINGE PREPARATIONS GALVANIZED (G-90) 3 1/2" 1 pair or 1 1/2 pair Standard Price per 4 Sided frame Add 24 4 1/2" standard or heavyweight Standard Per member Add 8 1 1/2 pair up to and including 7'6" Standard 5" standard or heavyweight Add Each 4 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16

HOLDERS Overhead stop and holder surface mounted 14 ga Add 19

PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56

PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47

STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout) 66 FRM Series Frames - 12 Ga. Flood Resistant Flood Resistant Frame Prices May, 2018

GENERAL INFORMATION 5 7/8 6-1/8 8 10 12 CURRIES FRM series frames are available double rabbet. Prices WIDTH HEIGHT THRU THRU THRU THRU THRU reflect hardware preparations for 1 3/4" doors. Refer to CURRIES 6 7-7/8 9-7/8 11-7/8 14 Architectural Technical Data Manual for standard details and limitations. 6'8" 1666 1688 1726 1772 1819 2'0" Miter, notch, and FW welding charges are included with these list THRU prices on this page. 3'0" SINGLES 7' 1671 1695 1734 1780 1828 2" face frames are standard. 1", 1 1/4", 1 1/2", & 1 3/4" face frames are priced the same as 2" face at no extra charge.

Jamb depth ranges are listed above each column. NOTE:This product is manufactured offsite and ships separately 1/8" increment jamb depths (all ranges 5 7/8" thru 14") are available at no extra charge. Call to verify lead-times, freight cost, and ship schedule

ANCHORS - foot clips are welded in place Standard loose jamb anchors are included in these prices. 3 per jamb up to 7'6". Complete anchor information is listed in the Engineered Frame Section

Welding charge only per anchor Add 2 (Add for appropriate anchor)

EXTRAS BUNDLING AND TAGGING FRAMES Frame Order Code 4F Welded Frames Add 4

In order for this product to meet Buy American-type regulations, orders must reflect that they meet "Buy American Act" or "Buy America Act”, as applicable. 67 FRM Series Frames - 12 Ga Flood Resistant Flood Resistant Frame Prices May, 2018

EXTRAS EXTRAS Four (4") INCH FACE HEADS JAMB DEPTH CLOSER PREPARATIONS Single including 4'0" Add 35 Regular arm E10 Add 19 Parallel arm E11 Add 19 GALVANNEAL (A60) NO ADD Standard HINGE PREPARATIONS GALVANIZED (G-90) 3 1/2" 1 pair or 1 1/2 pair Standard Price per 4 Sided frame Add 32 4 1/2" standard or heavyweight Standard Per member Add 8 1 1/2 pair up to and including 7'6" Standard 5" standard or heavyweight Add Each 4 Full surface mounted continuous hinge reinforcement Add 56 High frequency reinforcement strap support Per hinge Add 16

HOLDERS Overhead stop and holder surface mounted 14 ga Add 19

PIVOTS Top and bottom set single acting Per frame Add 160 Per jamb Add 68 Per head Add 92 Intermediate pivot single acting Each Add 56

PANIC EXIT REINFORCING Rim type E8 Add 13 Rim vertical rod surface mounted strike E5 Add 19 Vertical rod mortise strike in head - Each G20 Add 47

STRIKES 4 7/8" ANSI lipped strike 1 3/4" door E1 Standard 2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door E2 Standard 3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3 Standard 2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4 Standard Electric strike frame E9 Add 80 (includes cover box with knockout)