DOCSLIB.ORG

NCC Automotive Technology Tool List by Type- Fall 2018 Wrenches Metric

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
NCC Automotive Technology Tool List by Type- Fall 2018 Wrenches Metric NCC Automotive Technology Tool list by type- Fall 2018 Pliers Wrenches Needle-nose pliers Metric combination wrench set, long handle, Diagonal pliers (wire cutters) 12 point, none ratcheting (8 – 24mm) Combination pliers, kit Standard combo wrench set ¼ to 1 inch, long handle, Channel-lock pliers 12 point, none ratcheting (5/16-1) 16" adjustable joint pliers 3/8” click type torque wrench 5-75 ft-lbs Wire crimper/stripper pliers 1/2'” drive click type torque wrench 50-250ft -lbs Vise grip plier set (needle nose, small and large sizes) 8” adjustable wrench SAE flare nut wrench set (¼” –13/16”) Hammers Metric flare nut wrench set (9 –21mm) Ball-peen hammer, 24 oz Plastic hammer /soft face Ratchets and Sockets Rubber mallet soft face ¼” drive ratchet and extensions 2", 4" ¼” drive metric socket set (shallow) (5.5, 6-14mm) 6 point Test equipment ¼” drive metric socket set (deep) (5.5, 6-14mm) 6 point Fluke 115 multimeter, minimum ¼” driver handle Fluke 88 with automotive accessory kit, suggested ¼” drive swivel adapter 12 volt test light 3/8” drive ratchet and extensions (3”, 6”, 12”) Ignition spark tester (able to test coil over ignition 3/8” drive metric socket set (shallow) 6 point (8-19mm) systems) 3/8” drive metric socket set, (deep) 6 point (8 –19mm) Other 3/8” drive SAE (chrome) socket set 6 point (shallow) 10” mill file with handle 3/8” drive SAE (chrome) socket set 6 point (deep) 10" round file, rough, 3/8 3/8” drive swivel adapter Wire brush, rough, 12- 15-inch handle Spark plug socket 13/16” Fender cover Spark plug socket 5/8" Feeler gauge set, angled standard/metric .0015-.030 Torx bit set for ¼” and 3/8” drive (10t to 55t) Feeler gauge set, strait standard/metric .0015-.030 3/8 drive metric hex key set 2-10mm Spark plug gap tool/s ½” drive ratchet and extensions (5”, 10” suggested) 9/16 spark plug socket ½” to 3/8” adapter, impact 5/8 spark plug socket ½” drive swivel adapter, impact 11/16 spark plug socket ½” drive metric impact socket set, shallow, 6 point Tire valve core tool handle type 12-24mm Tire air inflation chuck combo chuck and gauge ½” drive metric impact socket set, deep, 6 point Blow gun (OSHA approved) 12-24mm 6 point Gasket scraper ½” drive metric, chrome, shallow, socket set, Oil filter wrench/s. must be able to remove various size oil 12–24mm, 6 point, optional due in impact set filters ½” drive metric, chrome, deep, socket set, Oil filter wrench/s. must be able to remove various size oil 12-24mm, 6 point, optional due to impact set filters ½” drive breaker bar Magnetic pick-up tool LED shop light, rechargeable, 200Lums min Screw Drivers set Hearing protection, ear muff style Philips, common sizes Safety glasses Blade, common sizes Leather welding gloves Pry Bar, 18 inch Oxy/acetylene welding glasses Hose removal pick NCC auto t-shirts, uniform Drum brake shoe hold-down spring tool Drum brake shoe return spring tool Punch and Chicle set Small roll cabinet–not to exceed 34” in length .
Load more

Recommended publications
  • National Warehouse Retailer Tools - MODESTO - July 11Th
    10/01/21 02:25:32 National Warehouse Retailer Tools - MODESTO - July 11th Auction Opens: Fri, Jul 6 11:37am PT Auction Closes: Wed, Jul 11 6:30pm PT Lot Title Lot Title MW7000 DeWalt Jump Starter & Digital Air Compressor MW7030 Stanley Riveter MW7001 Husky Gravity Feed Spray Gun Kit MW7031 Stanley Box Cutter MW7002 Husky 8 in 1 Portable Jump Start with Hand MW7032 Husky Reactionless Ratchet H4120 Generator MW7033 Stud Finder MW7003 Ryobi Cordless Hand Vac MW7034 25' Measuring Tapes MW7004 Husky 60-Piece 1/4 in and 3/8 in. Drive MW7035 Speed Out Titanium Damaged Screw Extractor Universal Mechanics Tool Set MW7036 Husky 3/8 in. Compressor Shut-Off Kit MW7005 Anvil 2 Gal. Pancake Air Compressor and Accessory Kit MW7037 Stud Sensor HD35 MW7006 Husky 6-Piece 100 Position Double Ratcheting MW7038 25' Stanley Measuring Tape Wrench Set MW7039 35' and 16' Measuring Tape MW7007 Husky Impact Sockets MW7040 DeWalt Hammer MW7008 Universal Line for Trimming Grass MW7041 Utility Knives MW7009 Universal Line for Trimming Grass MW7042 25'and16' Measuring Tapes MW7010 Bosch Hole Saw MW7043 DeWalt Wood Chisel MW7011 HDX 14 in. Tile Cutter MW7044 Wiss Snipps MW7012 Tungsten Carbide Router Bits MW7045 Stanley Surform MW7013 Milwaukee Hole Saw MW7046 Rubbermaid 48" Wall Panel MW7014 Stanley 16' Tape Measure MW7047 Rubbermaid 48" Wall Panel MW7015 DeWalt Staple Gun MW7048 Rubbermaid 48" Wall Panel MW7016 Husky Siphon Feed Spray Gun MW7049 Rubbermaid 48" Wall Panel MW7017 Stanley Saw MW7050 Facet Supply Line MW7018 Universal Line for Trimming Grass MW7051 Ryobi
    [Show full text]
  • 2020 Welding Tool List
    2020 Welding Tool List Master Tool List Highlighted section is required for the first week of school! QTY Unit Cost Total Welding Hood 1 $300.00 $300.00 Grinder – 4 ½” 1 $75.00 $75.00 Grinding disks- 4 1/2 x 1/4 x 7/8 5 $5.00 $25.00 Grinding disks- 4 1/2 x 1/8 x 7/8 5 $5.00 $25.00 Sanding disks- 4/ 12x60 grit x 7/8 5 $5.00 $25.00 Oxy-Acteylene Striker w/Extra Flints 1 $50.00 $50.00 Chipping Hammer 1 $10.00 $10.00 Pliers 1 $10.00 $10.00 C Grips 2 $25.00 $50.00 Channel locks 1 $15.00 $15.00 Side Cutters - Cutting MIG Wire 1 $15.00 $15.00 Safety Glasses 1 $5.00 $5.00 Full Face Shield/Clear 1 $10.00 $10.00 Welding Gloves 4 $10.00 $40.00 Welding Leathers 1 $35.00 $35.00 Handheld Wire Brush 1 $5.00 $5.00 12” Combination Square 1 $15.00 $15.00 Tape Measure 1 $15.00 $15.00 Protractor (Metal Working) 1 $6.00 $6.00 Oxy-Acteylene Cleaning Tip Kit 1 $5.00 $5.00 3 piece square set 1 $35.00 $35.00 Angle Finder 1 $30.00 $30.00 Wire brush for your grinder 2 $15.00 $30.00 Fillet Weld gauge 1 $20.00 $20.00 Sheet metal gauge 1 $5.00 $5.00 Welders calculator - paper slider 1 $5.00 $5.00 Sharpie markers Black & silver 10 $1.00 $10.00 Metal pencil - SILVER 2 $1.00 $2.00 Soap Stone holder round 1 $5.00 $5.00 soap stone 10 $5.00 $50.00 Paint markers - red, yellow, silver 3 $10.00 $30.00 Pipe wrap (roll) 1 $10.00 $10.00 Scaled Ruler 1 $5.00 $5.00 Updated: 07/2020 Pg 1 of 2 2020 Welding Tool List Drafting pencil 1 $10.00 $10.00 Graphing Paper 1 $10.00 $10.00 Extra Large Compass (10"-15") 1 $20.00 $20.00 Scribe 1 $50.00 $50.00 Needle nose plyers/3 pc kit 1 $25.00
    [Show full text]
  • BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP
    2005 BUGLER SALES CORP. Phone: 516 223-3868 • Fax: 516 868-6998 • E-Mail: [email protected] 969 CHURCH STREET • BALDWIN, NY 11510 PAGE BUGLER SALES CORP. 2 Phone: 516 223-3868 • Fax: 516 868-6998 969 CHURCH STREET • BALDWIN, NY 11510 LISTING BY MANUFACTURER • AEARO • CELLO • GT WATER PRODUCTS PAGE 48 PAGE 61 PAGE 44 • ALL CRAFTS • CHANNELLOCK TOOLS • GENERAL TOOLS PAGE 57 PAGE 119 PAGE 133 • ALLWAY TOOLS • COLCO HVAC • GENERAL WIRE PAGE 111 FURNACE CEMENT PAGEW 45, 133 • AMERICAN SAW PAGE 77 • GILMOUR PAGE 140-145 • COLEMAN CABLE PAGE 64 • AMERICAN STONE MIX DROPLIGHTS/ • GLOWMASTER PAGES 44, 58, 60, 61 EXTENSIONS PAGE 133 • AMES PAGE 47 • GOJO PAGES 119 • CRESCENT PAGE 61 • ANSELL EDMONT PAGES 39, 137 • GREAT NECK PAGES 57 • DAP PAGES 109/113/121/129 • ARROW PAGES 32/33/54/55/59/109 135-139 PAGE 123 • DASCO • HAGSTROM MAPS • BACHARACH PAGES 14/40/42/44 PAGE 95 PAGES 66-69 • DIAMOND • HANSON • BAG SUPPLY INC. PAGE 43 PAGE 47 PAGES 85-87 • DIXON • HEXCRAFT • BALTIMORE TOOL PAGES 45, 95 PAGES 11, 13 PAGE 42,43 • DURACELL • HK PORTER • BAYCO PAGES 54, 55 PAGE 23 PAGES 44-47 • DURABOND • HUOT • BERKLEY TOOL PAGE 59 PAGE 19, 129 PAGES 15-17, 123, 139 • EKLIND • ICE MELT INC. • BERNZOMATIC PAGE 11 PAGE 121 PAGE 131 • ENDERES • IDEAL • BETA PAGE 119 PAGES 63, 65 PAGES 66-68, 70+71, 78-85 • ENERGIZER • IRWIN • BLACKJACK PAGES 55 PAGES 17/19/21/23/38 PAGE 39 • EVERHARD 43/135 • BLITZ PAGE 121 • ITW BUILDEX PAGE 55 • FAST ORANGE PAGE 119 • BONDHUS PAGE 61 • JAMERCO DRIVE PINS PAGE 11 • FIRE POWER PAGE 111 • BOSCH PAGE 131 • JANITORIAL INC.
    [Show full text]
  • Power Brush Catalog.Pdf
    POWER BRUSHES POWER BRUSHES CHOOSE QUALITY Superior construction, the highest quality materials, state of the art manufacturing, and exacting quality standards WHY WEILER deliver the most consistent brush performance. Each Weiler brush is designed to provide the best performance at the lowest cost-of-use. That's why we re-engineered our 4" stringer bead brush to deliver MAXimum impact, letting the wire do the work. Our beefed up Roughneck® Max brush delivers up to BONDED ABRASIVES twice the life. Combine that with the hardest, strongest wire and an improved knot design to MAXimize cleaning power and you have a brush that you can trust when your name is on the line. Technical Information .................................................... 48-56 Knot Wire Wheels ........................................................... 57-63 Weld Cleaning Brushes ................................................. 62-63 Crimped Wire Wheels .................................................... 64-71 COATED ABRASIVES Nylon & Tampico Wheels ...................................................72 Cup Brushes .................................................................... 73-75 Stem-Mounted End Brushes ......................................... 76-79 Crosshole Deburring Brushes ............................................80 Power & Hand Tube Brushes ....................................... 81-85 Crossflex Honing Brushes ............................................. 86-89 Miniature Brushes .......................................................... 90-91 Non-Sparking
    [Show full text]
  • Torque Wrench Manual English
    Digital Electronic Torque Wrench Operating Manual Model 60648 This manual will help you to use the many MAINTENANCE AND STORAGE features of your new digital torque wrench. Before operating the torque wrench, please read ATTENTION: this manual completely, and keep it nearby for To maintain accuracy, a one-year future reference. periodic recalibration is recommended. Please contact your local dealer for FEATURES calibration details. CAUTION: ● Interchangeable head 1. Over-torque (110% of Max. torque range) ● Digital torque value readout could cause breakage ● +/- 2% accuracy or loss of accuracy. ● CW and CCW operation 2. Do not shake violently ● Peak hold and track mode selectable or drop wrench. ● Buzzer and LED indicator for the 9 pre-set 3. Do not use the wrench target torques as a hammer. ● Water contact indicator 4. Do not leave the wrench in any place exposed to ● Engineering units (ft-lb, in-lb, N-m, kg-cm) excessive heat, humidity, or direct sunlight. 5. Do not use the wrench in water (not waterproof). selectable 6. If the wrench gets wet, wipe it with a dry towel ● Stores up to 50 data files for recall and joint as soon as possible. The salt in seawater can be torque auditing especially damaging. ● Auto Sleep after about five minutes idle 7. Do not use organic solvents, such as alcohol or ● (2) AAA Batteries included paint thinner when cleaning the wrench. 8. Keep the wrench away from magnets. 9. Do not expose the wrench to dust or sand as this could cause serious damage. 10. Do not apply excessive force to the LCD panel.
    [Show full text]
  • 05/29/18 Tools & Home Improvement Auction
    09/27/21 12:18:09 05/29/18 Tools & Home Improvement Auction Auction Opens: Wed, May 23 3:30pm PT Auction Closes: Tue, May 29 5:30pm PT Lot Title Lot Title 0001 Husky 25 Gallon Mobile Toolbox 0029 Wiss Multi-Purpose Wire Cutters Model 0002 Husky 37" 50 Gallon Mobile Toolbox PWC9W 0003 2-Pack Window Insulation Shrink Kit 0030 Wiss Spring Assisted Folding Pocket Knife 0004 2-Pack Window Insulation Shrink Kit 0031 Wiss Quick Change Folding Utility Knife 0005 Frost King 9-Pack Window Insulation Shrink 0032 Wiss Auto Retracting Safety Utility Knife Kit 0033 Crescent Permabond 20oz. Rip Claw Hammer 0006 Bosch Self Leveling 30 ft Cross Line Laser 0034 Crescent 8" Pass Through Adjustable Wrench 0007 (2) Lengths of Frost King Door & Weather Seal Set 0008 (2) Lengths of Frost King Weather Stripping 0035 Crescent 7pc. SAE+MM Combo Nut Driver Socket Set 0009 (2) 10 ft Rubber Foam Self Stick Weather Seal 0036 Husky 6pc. Diamond Tip Magnetic Screwdriver 0010 Zircon HD25 Stud Sensor Set 0011 Zircon HD70 Stud Sensor 0037 Husky Gravity Feed HVLP Spray Gun 0012 Stanley Dual Melt Glue Gun GR25 0038 Husky High-Low Torque 1/2" Impact Wrench 0013 Stanley 10" Medium Duty Riveter Model MR33 0039 Husky Digital Sliding T-Bevel 0014 Ryobi Smart Works Moisture Meter for 0040 Husky 46pc. Stubby Wrench & Socket Set Smartphone 0041 Husky 23pc. Precision Screwdriver Set 0015 Stanley Powerlock 16 ft & Fatmax 25 ft Tape Measures 0042 Husky 2pc. Quad Drive Ratcheting Wrench Set 0016 (2) Stanley Utility Knives w/10 Spare Blades 0043 Husky 2" O.D.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • United Rentals Tool Solutions Catalog
    United Rentals Tool Solutions Catalog UnitedRentals.com | 800.UR.RENTS © 2017 United Rentals, Inc. 38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM Tool Solutions Products 38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM TABLE OF CONTENTS Cooling, Ventilation & Vacuum ........... 2-3 Piping................................................. 21-25 Sanders & Grinders................................42 Air Horns .....................................................2 Flange Spreaders......................................24 Angle Grinders & Sanders ........................42 Blowers ................................................... 2-3 Hydrostatic Test Pump Air........................21 Hand Sanders ...........................................42 Cooling Fans...............................................2 Geared Threader.......................................21 Belt Sanders..............................................42 Cooling Trailers ...........................................2 Threading Machines..................................21 Saws .................................................. 43-44 Vacuums .....................................................3 Pit Bull.......................................................22 Reciprocating Saws ..................................43 Rolling Unit................................................22 Air Tools ................................................ 4-7 Band Saws................................................43 Track Unit..................................................22 Texas Pneumatic Ventilation
    [Show full text]
  • Cutting & Welding Products
    WELDING PLASMA OXYFUEL ACCESSORIES Cutting & Welding Products FirepowerOnline.com Advantage Firepower® Products Performance, Value and Ease of Use Firepower, a leader in metal cutting, gas control and specialty welding solutions, is meeting the needs of people who demand professional-quality results, through a refined portfolio of Firepower branded products. These products represent the leading edge in design, performance, quality and safety, backed by 100 years of proven innovation. The Firepower lineup offers superior performance, excellent value and ease-of-use that helps the craftsman to get the job done right the first time. Firepower OxyFuel, incorporating the authentic Victor® torch and regulator range, is the heart of the Firepower family, with system solutions and components designed for individual needs. The OxyFuel range will perform a wide spectrum of tasks, from brazing sheet metal to cutting up to six-inch thick steel. Firepower Plasma offers a broad range of Manual Plasma Cutters capable of slicing up to 1-1/2 inches in multiple metals. These machines are easy to use and can cut a variety of metals, including steel, aluminum, galvanized and more. Firepower MST, with its new line up, comprises the core of the Firepower Welding range. Its technology has changed the game, setting a new standard for portable welding equipment. The 3-in-1 power supplies provide MIG, Stick and TIG capabilities in one integrated system. Firepower Velocity™ consumables allow for easy tip changes (no tip threads, no tools) while delivering longer life. Our consumables are designed for total welding flexibility and optimized welding performance with each process. Firepower draws from the heritage and quality of Victor and Tweco equipment, with the added advantage of utilizing our excellence in product support, service and application know-how.
    [Show full text]
  • Parr Service Clamps, Fixtures, and Tools
    Bulletin No. 307 Parr Service Clamps, List of tools for Parr product lines. Fixtures, and Tools Acid Digestion Vessels Part No. Description For Use with Models 264AC2 Hook Spanner Wrench 4744, 4749, & 4749A A285AC Holding Fixture 4744, 4749, & 4749A A263AC Spanner Jack Assembly with 264AC Face Spanner 4746 & 4747 264AC Face Spanner only 4746 & 4747 2583HC Service Fixture 4748 & 4748A Calorimeters Part No. Description For Use with Models 475A Service Clamp Head 1108 Series 568A Service Clamp Head 1110 A536A Service Clamp 1136 & 1138 534A Service Fixture 1107, 1109, 1109A, 1109X 700DD Tool, O-Ring Installation 1271 551A Tool, O-Ring Installation - 1109 110 9 585DD Tool, Pin Extraction All Calorimeters (except 1341) 322HW Tool, Quick Release 6510, 6520A TX03SKMM Metric Hex Wrench .89mm 6100, 6200, 6300, & 6400 TX03SK 1/32 Socket Screw Key 6100, 6200, 6300, & 6400 (pre 2009) 421A Bomb Lifter 1341, 6050, 6100, & 6200 TX14SK 9/64 Socket Screw Key 1281, 6300, & 6400 A38A Head Support Stand 1341, 6100, 6200, 6300, & 6400 A39A Head Support and Stand 1110 1005DD Forceps 6300 & 6400 876DD Cutter, Plastic Tubing 1281, 1271, 6200, 6300, & 6400 356HCW Pliers for Snap Ring 1281, 6050, 6300, & 6400 Tech Note 307 06/03/16 Page 1 Magnetic Drives Part No. Description For Use with Mag Drives 1947HC Bushing (1133HC) Installation Tool A1120HC_, A2140HC_, and A2150HC_ Series 1948HC Bushing (1133HC) Removal Tool A1120HC_, A2140HC_, A2150HC_, and A3040HC Series 1947HC2 Bushing (1133HC) Installation Tool A3040HC_ Series 1950HC Bushing (1166HC) Installation Tool A1180HC and A1750HC Series 1951HC Bushing (1166HC) Removal Tool A1180HC and A1750HC Series 2177HC Bushing (2162HC) Installation Tool A2160HC and A2170HC Series 2178HC Bushing (2162HC) Removal Tool A2160HC and A2170HC Series 2086HC Bearing Installation Tool All Magnetic Drives (manual) (A1120HC/A1180HC/A1750HC) 264AC3 Pin Spanner Wrench, 2” A1180HC, A1750HC, A2160HC and A2170HC Series 264AC4 Pin Spanner Wrench, 1½” A1120HC, A2140HC, A2150HC, and A3040HC Series 264AC5 Face Spanner Wrench, Adj.
    [Show full text]
  • Bay Country Rentalsbaybay Countrycountry Rentals 410-437-5660410-437-5660410-437-5660BAY410-437-5660410-437-5660 COUNTRY
    BayBay CountryCountry RentalsBay Country RentalsBayBay CountryCountry Rentals 410-437-5660410-437-5660410-437-5660BAY410-437-5660410-437-5660 COUNTRY OF PASADENA, INC. 410-437-5660 www.baycountryrentalsofpasadena.com 8017 Ft. Smallwood Road Baltimore, Maryland 21226 8017 Ft. Smallwood Rd. Bay Country Rentals of Pasadena, Inc. (Next to 84 Lumber Co.) Bay Country Rentals Bay Country Rentals 410-437-5660 410-437-5660 Terms and Conditions Ready Mixed Concrete Job Too Small? Rental Period We sell as little as 1/4 yard at a time Minimum: Any 4 hour period during business hours, except where a shorter minimum is indicated. Job Too Big? Overnight: Any weekday after 4 p.m. until 8 a.m. the fol- Take only the amount you can handle at one time lowing morning is considered a 4 hour minimum. Day: Any weekday, 24 hours from the time the item is Hard To Get At? rented. Our special trailer can get into that tight spot. Weekend: Friday – after 4 p.m. until 8 a.m. Monday morning is Ready To Pour? considered a 2 day rate. No mixing -- No messing. Saturday – 7:30 opening until 5:30 p.m. is consid- ered 1 day rate. How Much Do I Need? Saturday – noon until 8 a.m. Monday morning is Call for free estimate 1 considered 1 /2 day rate. Just drive in. Haul it away. We provide a self-dumping Saturday – after 4 p.m. until 8 a.m. Monday morning trailer with manually operated dump system 1-2 yard is considered a 1 day rate. capacity.
    [Show full text]
  • Janitorial 326-348
    BACK OF HOUSE Clean & Organize www.wincous.com/product-category/back-of-house JA CARPET ENTRYWAY FLOOR MATS ENTRYWAY FLoor MATS ♦♦Vinyl backing prevents curling/ripping and stays flat ♦♦Carts roll easily over the tapered rubber edge NIT ITEM DESCRIPTION COLOR UOM CASE FMC-310C 3' x 10' Charcoal Each 1 FMC-310U 3' x 10' Burgundy Each 1 FMC-35C 3' x 5' Charcoal Each 1 OR FMC-35U 3' x 5' Burgundy Each 1 BACK OF HOUSE FMC-46C 4' x 6' Charcoal Each 1 FMC-46U 4' x 6' Burgundy Each 1 fmC-310C I Clean & Organize A Tapered, fmC-310U weighted, durable L Lays flat & does not curl/rip Tapered, weighted, with constant foot traffic durable edge ANTI-FATIGUE RUBBERIZED GEL FOAM FLOOR MAT ANTI-SLIP & ANTI-FATIGUE ♦♦Ideal for standing-in-place jobs ♦♦Beveled edges reduce tripping FLoor MATS ♦♦Comfortable and supportive closed-cell foam ♦♦Grease-resistant and waterproof ♦♦1/2" thick ITEM DESCRIPTION COLOR UOM CASE FMG-23K 2' x 3' Black Each 24 Beveled edge FMG-23K 1/2" thick STRAIGHT EdGE NATURAL RUBBER FLOOR MATS ♦♦Anti-slip & anti-fatigue top-grade natural rubber ♦♦Excellent drainage in wet areas ♦♦All straight-edge mats are grease-resistant - use in grease-prone areas to prevent slipping ♦♦Trim to customize size for best fit 3/4" thick ♦♦3/4" thick ITEM DESCRIPTION COLOR UOM CASE Grease-resistant RBMH-35K 3' x 5' Black Each 1 RBMH-35R RBMH-35K RBMH-35R 3' x 5' Red Each 1 RBMH-35K-R 3' x 5', Rolled Black Each 1 RBMH-35R-R 3' x 5', Rolled Red Each 1 Available flat BEVELED EDGE FLOOR MATS or rolled ♦♦Anti-slip & anti-fatigue top-grade natural rubber Red
    [Show full text]