8 Nickel-Cadmium Batteries 9 – 10 Vrla

Total Page:16

File Type:pdf, Size:1020Kb

8 Nickel-Cadmium Batteries 9 – 10 Vrla CHAPTER PAGE LITHIUM-ION BATTERIES 2 – 5 NICKEL-METAL-HYDRIDE BATTERIES 6 – 8 NICKEL-CADMIUM BATTERIES 9 – 10 VRLA BATTERIES 10 – 14 LITHIUM BATTERIES 14 – 19 DRY CELL (ALKALINE AND ZINC-CARBON BATTERIES) 20 – 21 1 LITHIUM-ION LITHIUM-ION EXCELLENT MODEL NUMBER (EXAMPLE) NCR-18650A Appendix stands for battery performance characteristics BATTERY SAFETY Divide this by 10 to obtain the approx. battery height (in mm) Stands for approx. diameter (in mm) of the battery Round AND SUPERIOR Lithium-Ion battery UR-18650ZT Appendix stands for battery PERFORMANCE performance characteristics Divide this by 10 to obtain the approx. battery height (in mm) Stands for approx. diameter (in mm) of the battery Lithium-Ion battery, round Model Technology*1 Nominal Typical*2 Dimensions (mm) Approx. voltage (V) capacity (mAh) Diameter Height weight (g) UR-14430P Li-Ion Standard Type 3.7 700 13.9 42.9 17.5 UR-14500Y Li-Ion Standard Type 3.7 710 13.9 49.2 19.4 VIDEO UR-14500P Li-Ion Standard Type 3.7 840 13.9 49.2 20.0 UR-14650P Li-Ion Standard Type 3.7 980 13.9 64.7 26.0 UR-14650R Li-Ion High Power Type 3.6 1,050 13.9 64.8 26.6 UR-16650ZT High Voltage Charge System 3.7 2,200*3 16.4 64.9 40.0 UR-18500Y Li-Ion Standard Type 3.7 1,400 18.1 49.3 31.9 UR-18500F Li-Ion Standard Type 3.7 1,700 18.1 49.3 33.5 UR-18650SA Li-Ion High Power Type 3.7 1,300 18.1 64.8 44.2 UR-18650W Li-Ion High Power Type 3.7 1,600 18.1 64.8 46.1 Scan QR code UR-18650WX Li-Ion High Power Type 3.7 1,600 18.1 64.8 45.9 to view product UR-18650Y Li-Ion Standard Type 3.7 2,000 18.1 64.8 43.3 series video. UR-18650E Li-Ion High Power Type 3.6 2,150 18.1 64.8 44.5 UR-18650A Li-Ion Standard Type 3.6 2,250 18.1 64.8 43.0 CYLINDRICAL SINGLE CELL UR-18650AA Li-Ion High Power Type 3.6 2,250 18.1 64.8 42.1 UR-18650F Li-Ion Standard Type 3.7 2,600 18.1 64.8 47.0 A perfect combination of high energy density (NNP technology), safety (PSS techno- NCR-18500 NNP, HRL 3.6 2,000 18.2 49.4 34.0 logy) and long life shows what is possible with Lithium-Ion battery technology from UR-18650ZY Li-Ion Standard Type 3.7 2,600 18.2 64.8 47.0 Panasonic. Excellent battery safety on one hand, and superior battery performance UR-18650RX Li-Ion High Power Type 3.6 2,050 18.2 65.1 46.5 on the other: this is what Panasonic stands for. NCR-18650E NNP, HRL, Li-Ion High Power Type 3.6 2,250 18.2 65.1 44.0 UR-18650EA Li-Ion High Power Type 3.6 2,350 18.2 65.1 46.0 UR-18650NSX FEATURES APPLICATIONS Li-Ion High Power Type 3.6 2,600 18.3 65.1 46.4 UR-18650ZT High Voltage Charge System 3.7 2,800*3 18.2 65.1 48.0 High energy density and high voltage ensure small Power tool battery dimensions Garden tool NCR-18650 NNP, HRL 3.6 2,900 18.2 65.1 45.5 Long-life, stable power supply with flat discharge voltage Emergency lighting NCR-18650F NNP, HRL 3.6 2,900 18.2 65.1 45.0 Use of Lithium-Ion batteries requires a safety unit UPS system NCR-18650PF NNP, HRL, Li-Ion High Power Type 3.6 2,900 18.2 65.1 47.0 Safety technologies such as HRL available Portable POS terminal NCR-18650A NNP, HRL 3.6 3,070 18.2 65.1 46.0 GPS device NCR-18650BF NNP, HRL 3.6 3,350 18.2 65.1 46.5 Shaver UR-16650ZTA 4 E-bike High Voltage Charge System 3.7 2,500* 16.4 64.9 39.6 Pedelec, other UR-18650ZTA High Voltage Charge System 3.7 3,000 18.2 65.1 48.0 2 *1 Please find the explanations of our technologies on the following pages. *2 4.2V charge *3 4.3V charge *4 4.35V charge LITHIUM-ION LITHIUM-ION FEATURES APPLICATIONS 3D ILLUSTRATION*1 8 High energy density and high voltage ensure small Power tool 1 9 battery dimensions Garden tool 1 Exhaust gas hole 2 10 Long-life, stable power supply with flat discharge voltage Emergency lighting 3 2 CID (Current 11 Use of Lithium-Ion batteries requires a safety unit UPS system Interrupt Device) Safety technologies such as PSS and HRL available Portable POS terminal 3 Insulator GPS device 4 Separator Shaver 5 Cathode E-bike VIDEO 6 Anode MODEL NUMBER (EXAMPLE) Pedelec, other 7 Negative pole (cell can) NCA-752836A 8 Positive pole Appendix stands for battery 9 PTC (Positive performance characteristics Temperature 4 Battery height (in mm) Coefficient Device) Width of the battery (in mm) 5 10 Gasket Thickness of the battery (in mm) 11 Collector 6 Prismatic Lithium-Ion battery Scan QR code to 7 view 3D animated UF-103450P video. 3 Appendix stands for battery performance characteristics Battery height (in mm) Width of the battery (in mm) Thickness of the battery (in mm) Lithium-Ion battery, prismatic NOTICE TO READERS Model Technology*1 Nominal Typical*2 Dimensions (mm) Approx. voltage (V) capacity (mAh) Diameter Thickness Height weight (g) We are unable to support single cell business or accept orders from consumers. We design Lithium-Ion battery packs including a suitable safety unit device based UF-553436G LCO-System 3.7 830 35.60 5.50 33.85 15.6 on the technical specification of the customer. Due to the need for careful review UF-653436SU LCO-System 3.7 930 35.70 6.30 33.85 17.8 when selecting Lithium-Ion battery solutions please contact your local Panasonic UF-503436F LCO-System 3.7 700 35.80 4.90 33.95 13.8 sales office. In order to avoid a lack of supply please check the battery availability UF-593536F LCO-System 3.7 920 35.95 5.74 34.45 16.9 with your Panasonic sales team before design-in. Moreover this all Panasonic cells must always be equipped with a safety unit. UF-673438F LCO-System 3.7 1,100 38.00 6.70 33.50 20.8 UF-653039SU LCO-System 3.7 960 38.75 6.40 29.95 17.5 UF-533640S LCO-System 3.7 950 39.80 5.20 35.90 17.6 UF-703141FU LCO-System 3.7 1,090 40.70 7.05 30.50 20.9 UF-634042F LCO-System 337.7 1,270 41.70 6620.20 39.85 24.6 UF-423643F LCO-System 3.7 730 42.40 4.10 35.95 14.8 UF-383543F LCO-System 3.7 680 42.55 3.80 34.95 13.6 UF-463443GU LCO-System 3.7 850 42.60 4.55 33.85 16.0 UF-553443ZU LCO-System 3.7 1,040 42.80 5.55 33.80 18.7 PRISMATIC SINGLE CELL UF-653445ST High Voltage Charge System 3.8 1,260*3 44.50 6.30 33.80 22.3 UF-463446S LCO-System 3.7 870 45.80 4.45 33.86 17.2 A perfect combination of high energy density (NNP technology), safety (PSS techno- UF-533446Z LCO-System 3.7 1,080 45.80 5.35 33.86 20.4 logy) and long life shows what is possible with Lithium-Ion battery technology from UF-504547F LCO-System 3.7 1,290 46.60 5.00 44.90 25.0 Panasonic. Excellent battery safety on one hand, and superior battery performance UF-564447F on the other: this is what Panasonic stands for. LCO-System 3.7 1,420 46.60 5.55 43.90 27.0 UF-624447F LCO-System 3.7 1,580 46.60 6.15 43.90 29.9 UF-515148SX High Voltage Charge System 3.8 1,710*3 47.50 5.05 50.90 28.7 *1 Some batteries are not equipped with a PTC. Please consult Panasonic for further information. The illustration shows only one example of a Li-Ion 3 battery structure. *1 Please find the explanations of our technologies on the following pages. *2 4.2V charge *3 4.35V charge LITHIUM-ION LITHIUM-ION Model Technology*1 Nominal Typical*2 Dimensions (mm) Approx. Model Technology*1 Nominal Typical*2 Dimensions (mm) Approx. voltage (V) capacity (mAh) Diameter Thickness Height weight (g) voltage (V) capacity (mAh) Diameter Thickness Height weight (g) UF-555148SX High Voltage Charge System 3.8 1,870*3 47.50 5.45 50.90 31.2 UF-575673SX High Voltage Charge System 3.8 3,200*3 72.50 5.65 55.40 53.7 UF-463048F LCO-System 3.7 750 47.80 4.45 29.65 15.0 UF-475678SX High Voltage Charge System 3.8 2,720*3 78.00 4.65 55.40 47.4 UF-553048F LCO-System 3.7 930 47.80 5.40 29.65 17.9 UF-426080SX High Voltage Charge System 3.8 2,640*3 80.00 4.20 60.00 47.8 UF-103450P LCO-System 3.7 2,000 48.80 10.50 33.80 38.5 UF-496080SX High Voltage Charge System 3.8 3,160*3 80.00 4.85 60.00 55.4 UF-514050F LCO-System 3.7 1,260 49.50 5.00 39.80 23.7 NCA-623535 NNP, HRL 3.6 1,080 35.10 6.30 35.20 17.7 UF-463450F LCO-System 3.7 960 49.60 4.45 33.85 18.5 NCA-473136 NNP, HRL 3.6 650 35.45 4.70 30.90 11.7 UF-553450Z LCO-System 3.7 1,200 49.80 5.55 33.85 22.3 NCA-752836A NNP, HRL 3.6 1,010 35.95 7.80 27.90 16.7 UF-653450S LCO-System 3.7 1,300 49.80 6.35 33.85 25.1 NCA-793540 NNP, HRL 3.6 1,570 40.50 7.90 35.10 25.8 UF-703450F LCO-System 3.7 1,480 49.80 7.00 33.85 28.1 CGA-504042 PSS 3.7 980 41.35 5.00 39.80 19.8 UF-383551FU LCO-System 3.7 850 50.55 3.85 34.95 16.3 CGA-543442 PSS 3.7 900 41.55 5.40 33.80 17.6 UF-404251S LCO-System 3.7 1,060 50.80 3.90 41.90 20.3 NCA-593446 NNP, HRL 3.6 1,300 45.75 5.90 33.80 20.6 UF-495252ST High Voltage Charge System 3.8 1,720*3 51.50 4.90 51.90 30.3 NCA-103450 NNP, HRL 3.6 2,350 48.80 10.50 33.80 38.4 UF-534553F LCO-System 3.7 1,580 52.50 5.25 44.85 29.9 NCA-523450 NNP, HRL 3.6 1,150 49.55 5.30 33.76 19.7 UF-644553F LCO-System 3.7 1,960 52.50 6.40 44.85 36.6 NCA-903864A NNP, HRL 3.6 3,220 63.80 9.00 38.00 50.7 UF-644553FT High Voltage Charge System 3.8 2,060*3 52.50 6.40 44.85 35.2 NCA-653864 NNP, HRL 3.6 2,200 64.35 6.50 38.10 36.4 UF-485155S LCO-System 3.7 1,710 55.00 4.80 50.90 31.9 NCA-596080 NNP, HRL 3.6 4,170 80.00 5.85 60.00 67.0 UF-495255ST High Voltage Charge System 3.8 1,870*3 55.00 4.90 51.90 32.3 UF-515155SX High Voltage Charge System 3.8 2,040*3 55.00 5.05 50.90 33.6 UF-555155SX High Voltage Charge System 3.8 2,140*3 55.00 5.45 50.90 36.5 4 UF-575555SX High Voltage Charge System 3.8 2,370*3 55.00 5.70 54.90 40.3 3D ILLUSTRATION* UF-613756F LCO-System 3.7 1,450 55.40 5.80 36.65 28.6 UF-465156SX High Voltage Charge System 3.8 1,790*3 55.50 4.55 50.90 30.5 1 Anti-explosion valve UF-625556SX High Voltage Charge System 3.8 2,690*3 55.50 6.20 54.95 44.6 2 Anode cap 3 Terminal 1 UF-493856S LCO-System 3.7 1,290 55.55 4.77 37.85 24.6 4 Internal terminal 2 UF-514657FX
Recommended publications
  • Dual Battery Control System of Lead Acid and Lithium Ferro Phosphate with Switching Technique
    Article Dual Battery Control System of Lead Acid and Lithium Ferro Phosphate with Switching Technique Muhammad Nizam 1,2, Hari Maghfiroh 1,* , Fuad Nur Kuncoro 1 and Feri Adriyanto 1 1 Electrical Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36A, Surakarta 57126, Indonesia; [email protected] (M.N.); [email protected] (F.N.K.); [email protected] (F.A.) 2 Centre of Excellence for Electrical Energy Storage Technology, Universitas Sebelas Maret, Jl. Slamet Riyadi 435, Surakarta, Central Java 57146, Indonesia * Correspondence: hari.maghfi[email protected] Abstract: The increase in electric vehicles needs to be supported by the existence of reliable energy storage devices. The battery, as an energy storage system, has its advantages and disadvantages. The combination of different battery types is chosen since the battery is one of the energy storage systems with mature technology and low life cycle cost. A solution that can be proposed to cover the weakness of each battery is the use of the Dual Battery System (DBS). In this project, a dual battery control system with a combination of Valve Regulated Lead Acid (VRLA) and Lithium Ferro Phosphate (LFP) batteries was developed using the switching method. Battery selection switching is determined by the specification and operational set point of the battery used. The experimental testing was carried out. The result of the research conducted showed that the current sensor accuracy was 83.75% and the voltage sensor accuracy was 94.25% while the current sensor precision value was 64.91% and the voltage sensor precision was 99.74%.
    [Show full text]
  • Battery Technology for Single Phase UPS Systems: VRLA Vs. Li-Ion
    Battery Technology for Single Phase UPS Systems: VRLA vs. Li-ion White Paper 266 Revision 1 by Victor Avelar Martin Zacho Executive summary Lithium-ion battery prices have decreased over the years and are now becoming a via- ble option for UPS applications. This paper provides a brief overview of li-ion batteries in comparison to VRLA batteries for single- phase UPS applications. A 10-year total cost of ownership (TCO) analysis is also provided showing li-ion is 53% less than VRLA despite their capital cost premium. A sensitivity analysis reveals the TCO drivers. Schneider Electric – Data Center Science Center White Paper 266 Rev 1 2 Lithium-ion (li-ion) batteries have been used commercially for over 20 years in vari- Introduction ous applications1. Why then have they not been commonly adopted as batteries for single-phase UPSs? The answer lies in the fact that, like all other applications, li-ion cells2 weren’t available that provided UPS vendors with the right balance of price, energy density, power, safety, and reliability for single-phase UPS applications. However, advancements in li-ion chemistries and technologies over the last 10 years have provided UPS vendors with realistic options. These advancements have largely been due to requirements set forth by the electric vehicle industry. Figure 1 shows an example of a li-ion battery for a single-phase UPS application. The UPS Module is shown above its Li-Ion battery module. Figure 1 Li-ion battery module (at bottom) for 1-phase UPS (on top) applica- tions Li-ion batteries do offer legitimate benefits over VRLA (valve-regulated lead-acid) including: 3 • Fewer battery replacements (perhaps none) required over the life of the UPS eliminates the risk of downtime posed by battery replacement • About three times less weight for the same amount of energy • Up to ten times more discharge cycles depending on chemistry, technology, temperature, and depth of discharge • About four times less self-discharge (i.e.
    [Show full text]
  • Battery Technologies for Small Scale Embeded Generation
    Battery Technologies for Small Scale Embedded Generation. by Norman Jackson, South African Energy Storage Association (SAESA) Content Provider – Wikipedia et al Small Scale Embedded Generation - SSEG • SSEG is very much a local South African term for Distributed Generation under 10 Mega Watt. Internationally they refer to: Distributed generation, also distributed energy, on-site generation (OSG) or district/decentralized energy It is electrical generation and storage performed by a variety of small, grid- connected devices referred to as distributed energy resources (DER) Types of Energy storage: • Fossil fuel storage • Thermal • Electrochemical • Mechanical • Brick storage heater • Compressed air energy storage • Cryogenic energy storage (Battery Energy • Fireless locomotive • Liquid nitrogen engine Storage System, • Flywheel energy storage • Eutectic system BESS) • Gravitational potential energy • Ice storage air conditioning • Hydraulic accumulator • Molten salt storage • Flow battery • Pumped-storage • Phase-change material • Rechargeable hydroelectricity • Seasonal thermal energy battery • Electrical, electromagnetic storage • Capacitor • Solar pond • UltraBattery • Supercapacitor • Steam accumulator • Superconducting magnetic • Thermal energy energy storage (SMES, also storage (general) superconducting storage coil) • Chemical • Biological • Biofuels • Glycogen • Hydrated salts • Starch • Hydrogen storage • Hydrogen peroxide • Power to gas • Vanadium pentoxide History of the battery This was a stack of copper and zinc Italian plates,
    [Show full text]
  • Charging Valve Regulated Lead Acid Batteries
    TECHNICAL BULLETIN 41-2128 Charging Valve Regulated Lead Acid Batteries Please Note: The information in this technical bulletin was developed for C&D Dynasty 12 Volt VRLA products. While much of the information herein is general, larger 2 Volt VRLA products are not within the intended scope. 41-2128/0212/CD www.cdtechno.com Table of Contents CHARGING VALVE REGULATED LEAD ACID BATTERIES 1 Valve Regulated Lead Acid Batteries 20 to 200 Ampere Hours 3 Lead Acid Battery Theory of Operation 3 Discharge and Charging Reactions 3 Overcharging 3 Vented Lead Acid Cells: Overcharging and Gassing 4 Valve Regulated Lead Acid (VRLA) Cells: Overcharging and Gassing 5 Lead Acid Batteries and Undercharging 6 Charging the Valve Regulated Lead Acid (VRLA) Battery 6 Constant Current Charging 7 Single Rate Constant Current Charging 8 Multi-Rate Constant Current Charging 9 Taper Current Charging 11 Constant Voltage - Unlimited Current Charging 12 Modified Constant Voltage-Limited Current Charging 14 Charging Voltages vs. Electrolyte Specific Gravity (SG) 15 Recharging Time vs. Charging Voltage and Depth of Discharge (DOD) 15 Temperature Rise vs. Charging Voltage and Depth of Discharge 17 Current Limit and Depth of Discharge (DOD) vs. Recharge Time and Temperature 18 Charging Voltage vs. Gassing 20 Charging Voltage vs. Current Acceptance 21 Current Acceptance vs. Battery Temperature 22 VRLA Battery Float Voltage and Temperature Compensation 22 Charger DC Output and AC Ripple Voltage and Current 23 Thermal Runaway and VRLA Battery Charging 24 Charging Parallel
    [Show full text]
  • INVESTIGATION of the TEMPERATURE EFFECT on ELECTROCHEMICAL BEHAVIORS of Tio2 for GEL TYPE VALVE REGULATED LEAD-ACID BATTERIES
    Anadolu Üniversitesi Bilim ve Teknoloji Dergisi A- Uygulamalı Bilimler ve Mühendislik Anadolu University Journal of Science and Technology A- Applied Sciences and Engineering 2016 - Volume: 17 Number: 5 Page: 882 - 894 DOI: 10.18038/aubtda.279856 Received: 28 June 2016 Revised: 15 July 2016 Accepted: 24 November 2016 INVESTIGATION OF THE TEMPERATURE EFFECT ON ELECTROCHEMICAL BEHAVIORS OF TiO2 FOR GEL TYPE VALVE REGULATED LEAD-ACID BATTERIES Metin GENÇTEN 1, 2, Koray B. DÖNMEZ 3, Yücel ŞAHİN 3, * 1 Faculty of Science, Department of Chemistry, Anadolu University, 26470, Eskişehir, Turkey 2 Faculty of Arts and Science, Department of Chemistry, Ordu University, 52200, Ordu, Turkey 3 Faculty of Arts and Science, Department of Chemistry, Yıldız Technical University, 34210 İstanbul, Turkey ABSTRACT In this study, the effect of temperature on the electrochemical behaviors of gel electrolyte systems was investigated for valve o regulated lead-acid battery at 0≤ T ≤50 C. Fumed silica and mixture of fumed silica and TiO2 were used as gel electrolytes. TiO2 has a good combination with fumed silica. They were characterized by cyclic voltammetry, electrochemical impedance spectroscopy and battery tests. The anodic peak currents and redox capacities of the gel electrolytes increased with increasing of temperature. The highest anodic peak current and redox capacity were observed at 30 oC in fumed silica and at o 40 C in fumed silica: TiO2 based gel systems. The solution and charge transfer resistance values decreased in fumed silica:TiO2 gel system by increasing temperature. In battery tests, discharge curves were obtained for each gel system at 0, 25 and 50 oC.
    [Show full text]
  • Battery Spill Containment Is NOT Required for VRLA Batteries
    EAGLE EYE TECHNICAL NOTE Battery Spill Containment is NOT Title required for VRLA Batteries Document No. TN-020112-1 Revision History Date Revision Change Description Author(s) 2/1/12 0 Original document JAB 2/11/17 1 Updated codes JAB 5/18/20 2 Updated references JAB Disclaimer: The contents of this document are the opinions and work of the author(s) and may not necessarily represent the views and opinions of others, or Eagle Eye Power Solutions. The contents may be subject to changing codes, standards and practices and may be subject to change without notice. Battery Spill Containment is NOT required for VRLA Batteries Overview. Almost all non-Institute of Electrical and Electronics Engineers (IEEE) battery related codes were written with the Vented Lead-Acid (VLA) in mind. VLA is the correct IEEE term for a battery that has free-flowing, liquid, dilute sulfuric acid electrolyte that allows gases generated during charging to be vented out of the battery. Because of this design, precautions were put in place to both protect against electrolyte spills and the effects of gas evolution from the battery. Spill containment is not required for Valve-Regulated Lead-Acid (VRLA) batteries. These batteries are sometimes referred to as “sealed” or “maintenance free” batteries. In short, there is nothing to spill as the electrolyte is completely absorbed in the micro- porous plate separators or is gelled. New VRLA cells sometimes have a very small amount of free electrolyte but this is usually less than a few drops. With battery aging, the cells lose electrolyte which is known as “dry-out.” Indeed, dry-out is one of the main failure mechanisms of VRLA batteries.
    [Show full text]
  • Battery Technology for Data Centers and Network Rooms: Ventilation of Lead-Acid Batteries
    Battery Technology for Data Centers and Network Rooms: Ventilation of Lead-Acid Batteries White Paper 34 Revision 3 by Stephen McCluer Contents > Executive summary Click on a section to jump to it Introduction 2 Lead-acid batteries are the most widely used method of energy reserve. Ventilation systems must address Terminology 2 health and safety as well as performance of the battery and other equipment in a room. Valve regulated lead Environmental design 4 acid (VRLA) batteries and modular battery cartridges considerations (MBC) do not require special battery rooms and are Conclusion 7 suitable for use in an office environment. Air changes designed for human occupancy normally exceed the Resources 8 requirements for VRLA and MBC ventilation. Vented (flooded) batteries, which release hydrogen gas continuously, require a dedicated battery room with ventilation separate from the rest of the building. This paper summarizes some of the factors and U.S. codes to consider when selecting and sizing a ventilation system for a facility in which stationary batteries are installed. by Schneider Electric White Papers are now part of the Schneider Electric white paper library produced by Schneider Electric’s Data Center Science Center [email protected] Battery Technology for Data Centers and Network Rooms: Ventilation of Lead-Acid Batteries Introduction The main objectives of any ventilation system are management of environmental air tempera- ture, humidity and air quality. In a data center, or any facility in which electrical equipment and battery systems are installed, the ventilation system must address: • Health safety - the air must be free of pollutants that could be toxic, corrosive, poison- ous, or carcinogenic • Fire safety - the system must prevent and safely remove the accumulation of gasses or aerosols that could be flammable or explosive.
    [Show full text]
  • Faqs for Using Lithium-Ion Batteries with a UPS
    FAQs for Using Lithium-ion Batteries with a UPS White Paper 231 Revision 1 by Patrick Donovan Martin Zacho Executive summary Lithium-ion batteries offer several ad- vantages over traditional lead acid batteries. Despite the benefits, the use of lithium-ion batteries in uninterruptable power supplies (UPSs or battery backups) is relatively new with valve-regulated lead acid batteries still the dominant energy storage technology used today. This will likely change as Li-ion costs continue to decrease, the benefits be- come more widely known, and manufactur- ers make their UPSs compatible. This paper serves to answer common questions about Li-ion batteries and their use in UPSs. Schneider Electric – Data Center Science Center White Paper 231 Rev 1 2 Lithium-ion batteries offer several advantages over traditional valve-regulated, lead Introduction acid batteries commonly used in UPSs today. A much longer life span, smaller size and weight, faster recharge times, and declining prices have made lithium-ion bat- teries an appealing energy storage technology. This paper serves to briefly answer common questions about lithium-ion batteries and their use in UPS applications to aid the user in making a decision as to which battery technology is best for their bat- tery backup needs. FAQs What is a lithium-ion battery and how does it differ from a lead- acid battery? In the simplest of terms, a battery is an electro-chemical device that stores energy and releases it as electricity. Batteries are typically organized in strings and can be connected in series, in parallel, or a combination of both to achieve whatever volt- age and current is required for a given application.
    [Show full text]
  • Performance of Valve-Regulated Lead-Acid Batteries in Real-World Stationary
    sand2001-1110j Performance of valve-regulated lead-acid batteries in real-world stationary applications - Utility installations Paul Butler, Jennifer Dunleaveyb, Mindi Farber-DeAndab, Patrick MoseleyC a Sandia National Laboratories, MSO613, P.O. Box 5800, Albuquerque, NM 87185-0613 b Energetics. Inc., 501 School St. SW, Suite 500, Washington, DC 20024 ’ International Lead Zinc Research Organization, P.O. Box 12036, Research Triangle Park, NC 27709 Abstract A multi-phase project to investigate the reliability of valve-regulated lead-acid (VRLA) batteries in the field has been conducted by U.S. industry and government research organizations. The focus of the study has been to characterize the relationships between VRLA technologies, service conditions, performance, and field failures. Two surveys were conducted: one of VRLA end users, and the other of VRLA manufacturers. Data from end users were obtained for over 56,000 telecom and utility installations representing over 740,000 cells. Seven manufacturers participated in the study. Preliminary correlations between utility end-user data, manufacturer information, and battery reliability have been developed and will be reported. Data for telecommunications installations will be reported in a separate publication when completed. ’ Corresponding author: email [email protected]; phone (505)&M-7874 1 1. Introduction Valve regulated lead-acid (VRLA) batteries have been commercially available for more than 20 years and have been enthusiastically embraced by users of uninterruptible power supplies (UPS) because of the anticipated reduction in installation and operating costs, smaller footprint, lighter weight, and fewer environmental concerns. However, as with any evolving technology, users have encountered varying degrees of performance reliability. Manufacturers and end users pc$late that the premature failures experienced at some field installations may be due to temperature and charging sensitivities, manufacturing quality control, or compatibility issues with particular applications.
    [Show full text]
  • Battery Technologies for Unattended Monitoring Systems
    ANL/CSE-17/1 Battery Technologies for Unattended Monitoring Systems Recommendations for current and future systems Chemical Sciences and Engineering Division About Argonne National Laboratory Argonne is a U.S. Department of Energy laboratory managed by UChicago Argonne, LLC under contract DE-AC02-06CH11357. The Laboratory’s main facility is outside Chicago, at 9700 South Cass Avenue, Argonne, Illinois 60439. For information about Argonne and its pioneering science and technology programs, see www.anl.gov. DOCUMENT AVAILABILITY Online Access: U.S. Department of Energy (DOE) reports produced after 1991 and a growing number of pre-1991 documents are available free via DOE's SciTech Connect (http://www.osti.gov/scitech/) Reports not in digital format may be purchased by the public from the National Technical Information Service (NTIS): U.S. Department of Commerce National Technical Information Service 5301 Shawnee Rd Alexandra, VA 22312 www.ntis.gov Phone: (800) 553-NTIS (6847) or (703) 605-6000 Fax: (703) 605-6900 Email: [email protected] Reports not in digital format are available to DOE and DOE contractors from the Office of Scientific and Technical Information (OSTI): U.S. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062 www.osti.gov Phone: (865) 576-8401 Fax: (865) 576-5728 Email: [email protected] Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor UChicago Argonne, LLC, nor any of their employees or officers, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.
    [Show full text]
  • Selecting the Proper Lead-Acid Technology WHITE PAPER
    WHITE PAPER Selecting the Proper Lead-Acid Technology Introduction With so many different battery technologies on the market today, it can be difficult to make sure you’re selecting the right battery for your application. This document will describe the basic types of lead-acid batteries available, and help you understand which one will provide the best performance and value for your needs. Basic Battery Types Flooded (Wet) The flooded lead-acid (FLA) battery, invented in 1859, was the first Figure 1: Construction of a Flooded Battery rechargeable battery. After decades of refinement, it remains the primary choice for many applications. The battery plates are immersed in an electrolyte Built-in lifting brackets Anti-flame propagation of dilute sulfuric acid, and removable caps in the lid allow replacement of vent caps lost water. FLA batteries are cost effective, rugged, and provide reliable Low profile terminals performance when properly maintained. True deep-cycle construction Because FLA batteries are not sealed, they must be kept in the proper Proprietary Maxguard® orientation (upright) to avoid spilling of electrolyte. Due to the risk of spills, advanced design separator they cannot be shipped by air. Robust plate design During the charging process, FLA batteries consume water and release Trademarked maroon case hydrogen gas, which must be properly vented to avoid potential fire hazards. Trojan’s unique The water consumed during charging must periodically be replaced at a Alpha Plus™ Paste frequency that varies with the usage profile. Although the introduction of single-point watering systems has reduced the overall effort to water FLA batteries, this periodic requirement means that these batteries are appropriate only in situations where regular maintenance can be assured.
    [Show full text]
  • Lead Acid Vs. Lithium-Ion Battery Comparison
    Lead acid vs. lithium-ion battery comparison This is merely a compilation of useful research and is not original information developed by Michael Mobbs Sustainable Projects. The sources used are listed at the end of this document. LEAD ACID BASICS Lead acid has been around for over 100 years and will be a market force for the foreseeable future due to its low cost and established manufacturing base. The two types are identical in their internal chemistry. The most significant differences between the two types are the system level design considerations. Flooded lead acid batteries require three things that VRLA don’t: upright orientation to prevent electrolyte leakage, ventilated environment to diffuse gases created during cycling, routine maintenance of electrolyte. Due to these differences, the lower cost of flooded lead acid must be balanced against the added complexity and secondary costs. “Deep cycle” and “shallow cycle” lead acid batteries can be found in both the VRLA and flooded classes. Shallow cycle VRLA batteries are commonly used for automotive start, light, ignition (“SLI”) batteries that must deliver high power pulses for short durations. The stationary power market uses deep cycle since the batteries will often discharge at a low rate over the course of multiple hours. LITHIUM ION BASICS The concept of a lithium-ion battery was initially conceived in the 1970’s and began to see widespread adoption by the 1990’s. All lithium-ion cells are “deep cycle” meaning that they have the ability to be fully charged and discharged. The life of the battery will significantly increase if the depth of each discharge is limited to 80% of the rated capacity.
    [Show full text]