FAST® Supercharger & Cam Power Packages for GM Gen III/IV LS Engines

Memphis, TN – An Edelbrock® Supercharger Kit and COMP Cams® Cam Kit is the perfect pairing for performance enthusiasts looking for 850+ HP potential from their GM LS engines.

The ultimate solution for engine swaps and serious performance applications, FAST® has put together the first ever supercharger and valve train packages from two of the automotive aftermarket’s biggest brands – Edelbrock® and COMP Cams®. The FAST® engineering team extensively dyno tested various combinations of camshaft specs, valve springs and supercharger pulleys to optimize the power and efficiency of the Edelbrock® superchargers. Dyno testing on a stock head 6.2L LS3 engine produced over 850 HP when running with E85 fuel.

The FAST® Supercharger & Cam Power Packages include a pump gas friendly supercharger pulley for engine break-in, initial tuning and general performance driving, while a smaller pulley is also included when maximum power is desired on race fuel or E85. For those wishing to further fine tune boost levels, additional pulley sizes are available. Packages include the basics required to install the supercharger, but necessary accessory items such as fuel injectors, air intakes and heat exchanger pumps are left up to the installer, providing total flexibility for custom installations.

The Edelbrock® Supercharger Kits include a 2300 TVS supercharger w/ integrated intercooler. The intercooler is a high capacity, dual bar and plate design that enables major power gains through lower inlet air charge temps.

Also included are COMP Cams® application specific cam kits that contain state of the art Low Shock Technology™ Camshafts designed specifically for supercharger applications, along with perfectly matched pushrods, valve springs, retainers, locks, seats and seals. Available for GM Gen III/IV LS1/LS2/LS3 applications – see the application chart on the following page for specific kit contents.

Quick Facts

Product: FAST® Supercharger & Cam Power Packages for GM Gen III/IV LS Engines Part Number: #303011 (LS1/LS2); 303012 (LS3) Street Price: $5995.00

Social Media Pitch: FAST introduces first ever 850+ HP Supercharger & Cam Power Packages, combining an Edelbrock Supercharger Kit & COMP Cams Cam Kit for GM LS engines.

Features & Benefits: • Packages contain an Edelbrock® supercharger and COMP Cams® valve train set-up to create 850+ HP in GM LS1/LS2/LS3 performance applications • Packages include a supercharger, two different size pulleys, drive accessory pulleys, fuel lines & rails, camshaft, pushrods, valve springs, retainers, locks, seals and seats • Customize with your own injectors, air intake and heat exchanger pump • Application specific kits for GM Gen III/IV LS1/LS2/LS3 applications

Part #303011

Kits Include:

Part #303011 – GM LS1/LS2 Cathedral Port 4.8L/6.0L 1998-2007 Edelbrock Supercharger Kit #CK54-337-17 – Valve Train Package Price 2300 TVS Supercharger w/ Integrated Camshaft – Part #54-337-11 Intercooler Pushrods - #7639-16 Dual Valve Springs – #26926-16 3.875” SC Pulley Tool Steel Retainers – #1779-16 $5995.00 Valve Locks – #623-16 High Boost SC Pulley Valve Seals – #511-16 Accessory Drive Pulleys Spring Seats – #4695-16 Fuel Lines & Rails Installation Hardware

Part #303012 – GM LS3 Rectangle Port 6.2L 2007-2014 Edelbrock Supercharger Kit #CK54-337-17 – Valve Train Package Price 2300 TVS Supercharger w/ Integrated Camshaft – Part #54-337-11 Intercooler Pushrods - #7639-16 Dual Valve Springs – #26926-16 3.500” SC Pulley Tool Steel Retainers – #1779-16 $5995.00 Valve Locks – #623-16 2.750” SC Pulley Valve Seals – #511-16 Accessory Drive Pulleys Spring Seats – #4695-16 Fuel Lines & Rails Installation Hardware

Media Contact: Trent Goodwin, [email protected], 901.795.2400