T2 Terminator Die

FEATURES AND SPECIFICATIONS T2 Terminator Die

The Molex T2 Terminator Die is an easy to use tool for the termination of a variety of Molex crimp terminals. Production ﬂexibility is obtained through the use of simple interchangeable tooling. The tooling is inexpensive, and unlike a modular applicator, all crimp height and terminal feed adjustments are located in the press. The terminator die can be installed in the TM-42, TM-40 presses or Base Unit adaptor for use in a 3BF press, and is ideally suited for mid-volume bench operations. The Molex T2 Terminator Die is a newer version tool that allows for track adjustment. The Molex T2 Terminator Die will be replacing the Molex Terminator where possible. Most 14 AWG and smaller (16, 18, 20 ...) will eventually be designed into the T2 Terminator Die.

Features and Beneﬁts Mechanical Track adjustment capabilities in the T2 Terminators for Dimensions: Width—127.00mm (5.000") improved control of the bellmouth size and cutoff tab Depth—44.00mm (1.800") length Height—25.00mm (1.000") T2 Terminator has standardized tooling with the Molex Weight—1.4kg (3.0 lb) FineAdjust Applicator which will reduce your inventory requirements Quick release punches that will reduce set-up time and increase productivity Flexible and inexpensive tooling which will reduce overall cost

Insulation Punch

Striker Conductor Punch

Track Adjustment Back

Track Adjustment Rear Cover Front Wire Stop

Drag Frame Front Cover

Terminal Track Anvil Mount Cut Off Plunger Anvils and Retainer

Application Tooling Division Far East North Headquarters Far East South Headquarters European Headquarters Corporate Headquarters 1150 E. Diehl Road Yamato, Kanagawa, Japan Jurong, Singapore Munich, Germany 2222 Wellington Ct. Naperville, Illinois 60563 Tel: 81-462-65-2324 Tel: 65-268-6868 Tel: 49-89-413092-0 Lisle, IL 60532 U.S.A. Tel: 630-969-4550 Fax: 81-462-65-2366 Fax: 65-265-6044 Fax: 49-89-401527 Tel: 630-969-4550 Fax: 630-969-1352 Visit our Web site at http: //www.molex.com