DOCSLIB.ORG

Additional Specs, Equipment and Information

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Additional Specs, Equipment and Information http://sailnorthwest.com Bob Ross Toll-free 877-213-7441 7001 Seaview Ave NW, ste 140 Tel 206 286 1004 Tel 206 286 1004 Seattle, WA 98117 United States Fax 206 286 1353 Email [email protected] 29' C&C 29 Year: 1983 Last Listed Price: US$ 19,900 (12/14) Sold: US$ 17,750 (01/15) Located in Seattle, WA Hull Material: Fiberglass Engine/Fuel Type: Single diesel YW# 22784-2793845 Sold Antsea Quality, clean, reliable and fun C&C. Renowned for being well built and a great performer, the C&C 29 Mk2 is a great boat for Pacific Northwest PHRF racing, day sailing, fishing and weekend or extended cruising for families. She moves well in light air, cruises at 6 knots, is lively and fun to sail and is able to explore most anywhere with her 4' 3" shoal draft keel. She is ready for your next journey. Additional Specs, Equipment and Information: Dimensions LOA: 28.42 feet LWL: 24.75 feet Beam: 9.42 feet Displacement: 6700 pound Ballast: 2700 pound Cruising Speed: 6 knots Max Speed: 6.5 knots General Description On deck a large cockpit and wheel steering provides ample room for crew and fold out table for eating outside on warm days, but protected with a dodger when the weather turns, which can also fold down for racing. All lines lead back to the cockpit, which is great for single-handing. At 29 feet she is also very easy to maneuver in the marina. Under power, a super reliable fresh water-cooled Yanmar Diesel moves her easily through the water. For sailing, she is setup with newer main and roller furling 130% Genoa, but also comes with a cruising spinnaker, 120% genoa, a 100% jib and a storm jib. She strikes a great balance of simplicity and performance - simple to sail but has enough controls for those who like tweaking. All lines lead to the cockpit for easy solo sailing. She also has many amenities for extended cruising that you don't often get on a boat of this size. Down below is well lit with 2 big side windows, forward hatch and 3 portlights, the headroom is standing through out and sleeps 5-6 people in V berth, side berths and port quarter berth. She has a galley with sink, hot and cold water, propane stove, icebox, and plenty of storage areas. Forward, she has a full head, locker and comfortable v-berth. The main salon has a drop down table which folds away to make room for a fold out double to port and single to starboard. At last survey in 2012, her estimated value was $26,000. She has been well cared for with regular maintenance. Here are some recent items: Dripless Prop Shaft New Spinnaker Pole New exhaust muffler New prop shaft bracket New GFCI outlets New Bluetooth stereo and cockpit speakers New V berth hatch cover Replaced engine and holding tank hoses Recent engine oil/filter and fuel filter change New spinnaker halyards Newer (2012) main/Genoa sails and sheets All lines lead to cabin top Hot water from engine or shorepower Wheel steering with auto pilot Roller furling Hydraulic vang holds up boom Multiple headsails Shower Fold out settee into double berth Propane stove transom mounted Propane Grill Galley Two Burner Hillrange Propane Stove Hot/Cold Pressure Water Manual Freshwater Pump Deep Stainless Sink Large Ice Box Electronics & Electrical VHF Radio Ritchie Compass Raymarine Autopilot Raymarine Depthsounder Raymarine Speed indicator Battery Banks Two six volt and one group 24 battery 110V Systems from Shorepower Guest® Charge Pro portable charger Navigation Lights Anchor Light Interior Lights 30 Amp Shorepower Cord 10V GFCI outlets Automatic bilge pump Sails and Rigging Roller Furler on Headstay Hydraulic Boom Vang Whisker Pole Mainsail (Great Condition) 1 30 Genoa (Great Condition) Newer sheets 120/100/storm sails Spinnaker Dodger Other 10 kg Bruce Anchor, 25 feet chain and 120 Feet Rope Small Danforth Anchor Folding ladder on transom Manual bilge pump Lifelines, can be opened from cockpit for easy entry/exit Inclinometer Transom vents Disclaimer The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Last Revised: Apr 11, 2015 > In the Sling > At the mooring > Cockpit > Underway > Cockpit > Helm > Newer RayMarine instuments > Auxilary Controls > Salon > Salon Starboard > Salon Port > Galley & Quarter Berth > Galley > Galley > Full Salon Table > Salon Table Stored > Quarterberth > Companion Way > Looking Forward > Forepeak > Head > Head > Head > Hanging Locker > Cabin Top > Chain Locker > Cabin Top Starboard > Cabin Top Port > At the Dock > Beam on at the dock > Transom at the dock > Starboard Side > Starboard Side > Starboard Side > Clean Bilge > Large Lazerette > Batteries > Controls & Hour meter > Engine > Engine > Sailing > Line Drawing.
Load more

Recommended publications
  • Mainsail Trim Pointers, Reefing and Sail Care for the Beneteau Oceanis Series
    Neil Pryde Sails International 1681 Barnum Avenue Stratford, CT 06614 203-375-2626 [email protected] INTERNATIONAL DESIGN AND TECHNICAL OFFICE Mainsail Trim Pointers, Reefing and Sail Care for the Beneteau Oceanis Series The following points on mainsail trim apply both to the Furling and Classic mainsails we produce for Beneteau USA and the Oceanis Line of boats. In sailing the boats we can offer these general ideas and observations that will apply to the 311’s through to the newest B49. Mainsail trim falls into two categories, upwind and downwind. MAINSAIL TRIM: The following points on mainsail trim apply both to the Furling and Classic mainsail, as the concepts are the same. Mainsail trim falls into two categories, upwind and downwind. Upwind 1. Upwind in up to about 8 knots true wind the traveler can be brought to weather of centerline. This ensures that the boom will be close centerline and the leech of the sail in a powerful upwind mode. 2. The outhaul should be eased 2” / 50mm at the stopper, easing the foot of the mainsail away from the boom about 8”/200mm 3. Mainsheet tension should be tight enough to have the uppermost tell tail on the leech streaming aft about 50% of the time in the 7- 12 true wind range. For those with furling mainsails the action of furling and unfurling the sail can play havoc with keeping the telltales on the sail and you may need to replace them from time to time. Mainsail outhaul eased for light air upwind trim You will find that the upper tell tail will stall and fold over to the weather side of the sail about 50% of the time in 7-12 knots.
    [Show full text]
  • Are We Having Fun Yet! Created by John Barnett
    Are we having fun Yet! created by John Barnett { Rule 1, Never go down below specially with the engine running packing food, that should have been done at the dock. If you feel it coming on, do something active like steering. If you are prone to sea sickness take the proper drugs, before leaving the dock, better at night before to start. If sick, keep warm, try to drink, stay on deck, small bucket can be your friend. I have small buckets on my boat. No Cotton underwear will keep you cold. No! you can’t swim with the dolphins. Follow what the doc told you today. If wind is coming in the Galveston channel and against the current. Leave the channel going close to the east jetty, sail out until the waves calm down, then turn to the start. This can be the worst part of the race. Seasickness is the major problem! Understand the clouds and winds Watch the barometer, if it starts dropping shorten sail. If you smell ozone that fresh lighting smell, all hell is about to happen sails should have been reefed. Which way is the wind blowing? If the wind is blowing from the aft and the big clouds are coming from forward. Shorten sail. Make sure someone go down close and lock everything early. Fronts: Time to change sails or prepare for a wind shift. Do you have your harness on with life jacket? Jib should be rolled up, main ready to be reefed or done, look at the waves up there for a shift looking at white caps, flying spray starts at 27kts in salt water Shortening Sails First of all, does everyone in the crew know how? Skipper maybe sea sick down below.
    [Show full text]
  • What's in a Name?
    Neil Pryde Sails International 354 Woodmont Road #18 Milford, CT 06460 203-874-6984 [email protected] Adjusting and Trimming Your Roller Furling Headsail A layman’s guide to getting the most from your headsail By Bob Pattison Most contemporary mid-size sailboats built in North America over the last twenty years have been, by and large, masthead sloops with one or two sets of spreaders and fly a headsail that is between 140% and 155% in size. Generally these headsails are set flying on roller furling gear. With this in mind, here’s an easy and straightforward approach to trimming roller furling headsails and setting them up for quick and precise reefing. )LUVW7KLQJV)LUVW+DO\DUG7HQVLRQ)LUVW7KLQJV)LUVW+DO\DUG7HQVLRQ Luff tension is used to remove wrinkles from the luff of the genoa, so that the sail is smooth from to tack to head along the luff. Increasing the What’s in a Name? luff tension beyond this amount will affect the overall shape of the sail Headsail size percentages refer to length of by inducing stretch along the luff, which will pull the draft (shape) of the the “luff perpendicular’ or L.P. This is an imaginary line that runs from the clew of the sail forward for a better shape in heavier wind conditions. Don’t do it (!), sail and intersects the luff at a right angle, as you will more than likely, furl the sail as the wind strength increases the length of which is relative to the “J” negating the need for additional luff tension.
    [Show full text]
  • 2020 CMSR Monohull
    2020 Chicago Mackinac Safety Requirements - Monohulls Effective Date: February 1, 2020 US Sailing Section SER # Name Reference Requirement The Safety Equipment Requirements establish uniform minimum equipment and training standards for a variety of boats racing in differing conditions. These Overall 1.1 regulations do not replace, but rather supplement, the requirements of applicable local or national authorities for boating, the Racing Rules of Sailing, the rules of Class Associations and any applicable rating rules. The safety of a boat and her crew is the sole and inescapable responsibility of the "Person‐In‐Charge", as per RRS 46, who shall ensure that the boat is seaworthy and manned by an experienced crew with sufficient ability and experience to face Overall: 1.2 bad weather. S/he shall be satisfied as to the soundness of hull, spars, rigging, sails Responsibility and all gear. S/he shall ensure that all safety equipment is at all times properly maintained and safely stowed and that the crew knows where it is kept and how it is to be used. All equipment required shall function properly, be regularly checked, cleaned and serviced, and be of a type, size and capacity suitable for the intended use and size Overall: Equipment 1.4 of the boat and the size of the crew. This equipment shall be readily accessible and Knowledge while underway and, when not in use, stored in such a way that deterioration is minimized. Overall: Secure A boat's heavy items such as batteries, stoves, toolboxes, anchors, chain and 1.5 Storage internal ballast shall be secured.
    [Show full text]
  • Leopard 58' Catamaran – RABBLE ROUSER
    Leopard 58' Catamaran – RABBLE ROUSER Make: Leopard Boat Name: RABBLE ROUSER Model: 58' Catamaran Hull Material: Fiberglass Length: 58 ft Draft: 5 ft 7 in Price: $ 1,550,000 Builder: Robertson & Caine Year: 2014 Designer: Simonis Voogd Location: Ft. Lauderdale, FL, United States RABBLE ROUSER RABBLE ROUSER is an exceptional Owner’s version of the Leopard 58 with 4 cabin layout. Built and launched as a Leopard 58 but that’s where it starts and ends. In the hands of her current and original owner she was transformed into one of the most customized, highly detailed, well equipped and unique Leopard 58’s in existence. From her Carbon fiber roller furling boom to make sailing easy, to the custom cabinetry to enhance the already generous storage space, and a custom electrical system, where there was an opportunity to improve or make better, it was done. With low hours on both her engines and generators, this boat has East Coast Yacht Sales - Allen Schiller, CPYB at Dion's Yacht Yard, 23 Glendale Street, Salem, MA 01970, United States Tel: 617-529-5553 cell Tel: 707-414-0414 Fax: 978-744-7071 [email protected] seen very light use. You owe it to yourself to at least get onboard and see if RABBLE ROUSER is the boat for you. An Addendum section captures many of the changes and the thought process behind them. Measurements Cruising Speed: 9.5 kn Displacement: 61730 Cruising Speed RPM: 2200 lb LOA: 57 ft 7 in Fuel Tanks #: 4 LWL: 54 ft 2 in Fuel Tanks Capacity: 394 gal Beam: 27 ft 9 in Fresh Water Tanks #: 2 Max Bridge Clearance: 90 ft 3 in Fresh Water
    [Show full text]
  • STANDARD SAIL and EQUIPMENT SPECIFICATIONS (Updated October, 2016)
    STANDARD SAIL AND EQUIPMENT SPECIFICATIONS (Updated October, 2016) 1. Headsails, distinctions between jibs and spinnakers A. A headsail is defined as a sail in the fore triangle. It can be either a spinnaker, asymmetrical spinnaker or a jib. B. Distinction between spinnakers and jibs. A sail shall not be measured as a spinnaker unless the midgirth is 75% or more of the foot length and the sail is symmetrical about a line joining the head to the center of the foot. No jib may have a midgirth measured between the midpoints of luff and leech more than 50% of the foot length. Headsails with mid-girths, as cut, between 50% and 75% shall be handicapped on an individual basis. C. Asymmetrical spinnakers shall conform to the requirements of these specifications. 2. Definitions of jibs A. A jib is defined as any sail, other than a spinnaker that is to be set in the fore triangle. In any jib the midgirth, measured between the midpoints of the luff and leech shall not exceed 50% of the foot length nor shall the length of any intermediate girth exceed a value similarly proportionate to its distance from the head of the sail. B. A sailboat may use a luff groove device provided that such luff groove device is of constant section throughout its length and is either essentially circular in section or is free to rotate without restraint. C. Jibs may be sheeted from only one point on the sail except in the process of reefing. Thus quadrilateral or similar sails in which the sailcloth does not extend to the cringle at each corner are excluded.
    [Show full text]
  • Handicapped Accessible Barque Crosses Atlantic
    Volume XIX No. 4 May 2008 Handicapped Accessible Barque Crosses Atlantic FireFire DamagedDamaged BeneteauBeneteau RestoredRestored SummerSummer SailsticeSailstice Sailfest:Sailfest: AA FunFun PursuitPursuit Over 500 New and Used Boats p02.qxd 5/15/2008 11:32 AM Page 1 Seawear tm www.seawear.com Nautical Jewelry They lookook the ssame because they are the same. With a Yacht from BoatU.S., new boats suffering a total loss are Before and After ed with new boats! If your new boat suffers a total loss e it’s two and a half years old, you now have the option to a Total Loss the policy pay to replace the boat with the most current /model available. And, with most total losses, there’s no deductible or depreciation—which means you’re back on the water with little or no out-of-pocket expense. t Expert Claims Management and Emergency Dispatch - 24/7 t Full Salvage Assistance and $800,000 Fuel Spill Liability t Consequential Damage Coverage t Uninsured Boater Coverage Get the best protection available for your new Before After (or used) boat with a policy from BoatU.S. us for a fast, free quote ThanksT to NEW Replacementntt 1-800-283-28831 0000 28383 28832 3 BoatU.S. or apply online at BoatUS.com/insurance Simply Smart™ ROW SAIL MOTOR Get more fun from your tender. Row, motor or sail, Walker Bay’s Rigid Dinghy injects fun and versatility into a lightweight, low maintenance boat. Teach the kids to sail, row for exercise, or load it up to go from ship to shore, the Rigid Dinghy is the ideal, all around tender.
    [Show full text]
  • Ideal 18 Tuning Guide 1
    IDEAL 18 TUNING GUIDE 1 PHOTO BY CHRIS HOWELL TABLE OF CONTENTS 3 IDEAL 18 OVERVIEW 4 HULL, RIG & SAILS 6 UPWIND SAILING It is a ¾ fractional sloop rig, with swept spreaders 7 MAIN TRIM THE IDEAL 18 KEELBOAT WAS DESIGNED and no permanent or running backstays. No hiking BY BRUCE KIRBY AS A STRICT ONE-DESIGN, straps are provided or allowed; in fact, sailors are required to keep their legs inside the boat. Because ACCESSIBLE TO SAILORS OF ALL AGES, WEIGHTS, of the no-hiking rule and the heavy keel, a larger 8 JIB TRIM range of crew weights is competitive than in most SKILL LEVELS, AND COMPETITIVE BACKGROUNDS. one-designs. In 5-15 knots, any weight combination is competitive. 10 DOWNWIND SAILING THE EMPHASIS IS ON STRATEGY, TACTICAL SKILLS, AND BOATHANDLING, RATHER THAN The keel and rudder are identical from boat to boat, with no fairing allowed. The mast step and partner TUNING, HULL FAIRING, OR SPECIAL RIGGING. locations are fixed and the headstay length is fixed 12 TRIM CHART as well. 2 3 SAILS MAINSAIL – The main is a 2 + 2 batten setup: 2 full length upper battens and 2 shorter lower battens. Full RIG battens support the sail across it, preventing flogging and The 3/4 fractional sloop rig has NO permanent or running backstays; increasing the life of the sail. Most One Design boats do not instead, rig stability is generated by 15 degree swept spreaders and a allow full battens and so their mainsail leech breaks down large cross-section mast. Rig tuning is controlled by the upper and lower much faster.
    [Show full text]
  • The Beneteau 343 Grid/Hull Liner of Directional Fiberglass/GRP for a Sheet Winches (1) 75 Amp Service Battery Strong, Stiff, Light Composite
    62155 8/14/07 4:18 PM Page 65 CONSTRUCTION WINCHES ELECTRICAL Hull of hand-laid solid GRP bonded to a structural (2) Lewmar® 40 chrome self tailing genoa 14-function 12 Volt electrical panel The Beneteau 343 grid/hull liner of directional fiberglass/GRP for a sheet winches (1) 75 Amp service battery strong, stiff, light composite. Vinylester hull barrier (1) Lewmar® 30 chrome self tailing winch on coach roof (1) 75 Amp engine battery Standard Equipment and Options coat to resist osmotic blistering and zone-specific to port (for mainsail handling). Second winch to Coupling relay stitchmat laminates for specific increased strength starboard is offered as an option for spinnaker gear Electric fuel gauge optimization. (2) winch handles Lights: There are 7 reading lights, 2 halogen strip Cored GRP sandwich construction for stiffness, thermal (1) winch handle pocket in cockpit lights, and 11 ceiling lights. and acoustic insulation and lighter weight. Solid (5) 110 Volt outlets fiberglass reinforcements in high load areas. Integral SALON 20 Amp battery charger unidirectional GRP deck beams for added strength. Salon with two fore-and-aft settees Main bulkheads bonded 360° to the hull and deck for Center table to salon: inlaid wood table with bottle ENGINE EQUIPMENT rigid torsional and compressive strength. rack and drop leaves with molded wood fiddles. The Yanmar 3YM30-291 – 29 hp table is fixed to the mast support post. Engine compartment sound proofed with ON DECK Wood/stainless steel shelving to port and starboard insulating foam Welded stainless
    [Show full text]
  • Glossary of Terms for Cruising and Cruise
    GLOSSARY OF TERMS FOR CRUISING AND CRUISE PLANNING USPS Marine Environment Committee TERM / WORD = DEFINITION / EXPLANATION AIS = Automatic Indentification System (transponders / receivers) ‐ An automatic tracking system used by vessels for exchanging identifying information. Anchor = A heavy metal device fastened to a chain or line to hold a vessel in position, partly because of its weight but chiefly because the design shape digs into the bottom. Parts consist of: Flute, Shank, Crown, Ring, etc. (see Appendix C) Anchor set and hold = How easily an anchor will properly orient itself to penetrate the bottom and how much effort it will take to break the anchor free. Bare Boat = A type of chartering in which the person chartering a boat assumes responsibility and provides their own crew. Barometer = An instrument for measuring atmospheric pressure. Beam = The width of a boat from gunwale to gunwale at the widest point. Biocide = A chemical substance or microorganism which can deter, render harmless, or exert a controlling effect on any harmful organism. Biocides can be added to other materials (such as diesel fuel) to protect them against biological infestation and growth. Boat Survey = An inspection of a boat by a marine surveyor for insurance purposes or prior to the purchase of the boat. 1 Boom Vang = A system of fittings to hold the boom down under some sailing conditions. Bosun Chair = A chair used to hoist a crew member to the top of a mast or rigging, usually for making repairs. Broker Firm = A company which will help you find a suitable boat to charter. Bulwarks = The extension of the ship’s side above the main deck or walkway fore and aft to protect it against heavy weather.
    [Show full text]
  • Tips for Using IYC's Typhoon Keelboat, S/V Peter Lent
    Tips for Using IYC’s Typhoon Keelboat, s/v Peter Lent The Tender This is a small white plastic boat located on the tender rack at the south end of the club. “IYC” is stenciled on each side. Oars for the tender are stored in the shed at the south end of the club. Launch the empty tender using the roller and secure it to the cleat just north of the ladder. When returning the tender, be sure to lean it up against the rack and tie it to the rack and return the oars to the shed. (There is an identical dinghy but with fenders along both sides which could also be used once longer oars have been located for it). Once on Board s/v Peter Lent… 1. Securing the tender and preparing for leaving the mooring • Move one of the mooring lines so that both are on the same side of the forestay. • Secure the painter from the tender to the mooring lines (use a “round turn and two half hitches” knot for this connection). • The dinghy painter should be run through the loops of BOTH mooring lines and all three lines should be through the SAME opening on the bow. • It is easier to cast off if you have these lines and the dinghy on the shore side of the boat. • -Since the dinghy painter is long, you may want to double it up to prevent the tender from floating too far from the mooring. 2. Rigging the mainsail • Remove the sail cover. • Attach the mainsail halyard to the head of the mainsail (if not already attached).
    [Show full text]
  • Measuring for a Roller Furling Headsail
    hasse & Company Port Townsend Sails ROLLER FURLING HEADSAIL: SELF MEASURE FORM About You and Your Boat About Your Roller Furling System Name: ________________________________ Brand and model: ___________________________ Address: ________________________________ Roller furling luff tape size: ___________________ ________________________________ Side of sail for sacrificial sun cover: _____________ (Port if furler turns clockwise when sail gets furled in) Phone: ________________________________ Color of sacrificial sun cover: __________________ (Attach a sample if possible) Fax: ________________________________ Headstay sag at 15 knots: _____________ (inches) Email: ________________________________ Is your mast fit with a halyard restrainer? Yes / No (A halyard restrainer is a fair lead or sheave through Type of Boat: _____________________________ which the halyard is led in order to widen the angle between the headstay and the halyard and to avoid Name of Boat: _____________________________ “halyard wrap.”) LOA: ___________ Displacement: _____________ Thank you for your careful measuring! Measuring From Aloft (with headsail halyard) Attach a 50’-100’ steel measuring tape to the shackle that will be secured to the head of your sail when the sail is hoisted aloft. It is prudent to tie a downhaul line to the shackle for retrieving your halyard and measuring tape. Use the halyard to raise the shackle to the manufacturer’s ideal position for your roller furling system. Cleat off the halyard. Please measure and note the following in feet and
    [Show full text]