EJOT Building Fasteners
Total Page:16
File Type:pdf, Size:1020Kb
EJOT Building Fasteners Your strong partner for fastening solutions in the building and construction industry EJOT Building Fasteners Your strong partner for fastening solutions in the building and construction industry EJOT Building Fasteners Your strong partner for fastening solutions in the building and construction industry Expertise and experience With over 30 years of experience and development knowhow “Made in Germany“, we are familiar with all the needs concerning fastening tasks on building envelopes. This expertise is the source for our products and problem solutions which offer real benefits to our customers. Quality and efficient assembly The quality of our products surpasses planning laws and legal requirements. Our aim is to ensure quick and easy assembly. Customer friendly service We make a point of building friendly and trustful relationships with our customers. Our technical consultants offer 24hour customer service. If required our employees go directly to the building site. We also share our knowhow in training seminars. There for you worldwide Our Europewide sales and service network of subsidiaries as well as a worldwide project support team is glad to help our customers at any time. Over 30 years of building envelope expertise 1. Industrial Lightweight Construction 4. Flat Roofing Highquality fasteners for fixing profiled sheets and sandwich Fasteners, and installation tools for the efficient installation of panels in the industrial light weight construction insulation and waterproofing membrane to flat roofs and low pitch roofs. 2. External Thermal Insulation Composite Systems (ETICS) 5. Industrial Window and Facade Technology Special anchors for fixing insulation on external wall systems High quality fasteners for the window and door production and the use in aluminium/glass facade systems. 3. Rear Ventilated Facades Fasteners and anchors for fixing substructures and facade 6. Fastening Systems for Solar Installations fascias of rear ventilated systems For fastening of mounting systems for solar and photovoltaic installations. BMW World Munich Industrial Lightweight Construction BMW World Munich The BMW World Munich, an architectural master piece made of 4000 tons of steel, is a combination of exhibition, dispatch, adventure, museum and event place by the German automotive manufacturer BMW. The striking, 28 meter high double cone structure, built from individually manufactured steel profiles, is the most important carrier for the 16.000m² roof structure and together with the 12 additional pillars it creates the image of a floating cloud. The extraordinary architecture and the glass facade are not only functional but they make it possible to experience BMW with all senses. Plan start: November 2001 Start of construction: August 2003 Opening: 20./21. October 2007 Customer: BMW AG, Munich, Germany Architect: COOP HIMMELB(L)AU Wolf D. Prix / W. Dreibholz & Partner ZT GmbH Floor space: 73.000 m² Award: World Architecture Festival Award: Production, Barcelona, Spain 2008 Preis des Deutschen Stahlbaus 2008, Mainz, Germany 2008 RIBA European Award 2008, London, UK 2008 Detail Prize 2009 – Innovation Steel, Munich, Germany 2009 Wallpaper Design Award 2009: Best new Public Building, London, UK 2009 EJOT Product: EJOT® SUPERSAPHIR JT3 EJOT® SUPER-SAPHIR JT3 Stainless steel screw for the secure fastening of sheet metal onto steel substrate or of sheet metal onto sheet joints in side Technical advantages: lap stitching • available in different threadforms optimised for the individual application • proven bimet technology (point Csteel, A2 thread) • free spin zone for controlled stripping to counter the "locking" of the sheets to be installed in the side lap stitch • high pullout values due to optimum thread engagement and adapted thread pitch • ideal ratio between external thread diameter and drilling point diameter for the best possible fastening characteristics and high pullout strength • optimised drill point geometry for quick and easy fastening Palace Arkaden, Braunschweig External Thermal Insulation Composite Systems (ETICS) Palace Arkaden, Braunschweig Within only 20 months one of the most spectacular renovation projects in Europe has been carried out. On approximately 30.000 m² the castle arcades in Braunschweig offer a modern shopping world and through the combination of renovated, lateclassicist castle facades and the modern glass and render facades a unique appearance is created. In order to create uptodate surrounding conditions ecological aspects have also been considered in the course of the renovations. An area of 6.600 m² has been equipped with 80mm thick mineral wool insulation sheets. Energy costs are kept as low as possible with this ETIC system. Start of construction: 13. July 2005 Opening: 29. March 2007 Owner: Credit Suisse Asset Management Immobilien KAG mbH Project development and general planning: ECE Projektmanagement GmbH & Co. KG Architects: Jost Hering, Gisela Simon, Lorenz Riethmüller, Henning Schröter, Anna Dolezalova, Claudia Felis, Stephanie Raatz (ECE) in cooperation wth Grazioli + Muthesius Architects, Berlin EJOT Product: ejotherm STR U ejotherm STR U Cap anchor for concrete and masonry Technical advantages: The EJOT STR Principle • approved for all building material classes Your guarantee our STR principle • the EJOT STR principle with STR caps for a homogeneous surface and even render quick and easy, no milling dust For lasting and beautiful facades • optional flushmounted with the STR cap With the STR principle EJOT developed a unique fastening system. • shortest embedment depths, highest loads for maximum The anchor plates are installed into the insulation and then covered safety and a minimum number of anchors with a cap. This creates a homogeneous surface and even • durable contact pressure rendering. • optimised thermal bridges • preassembled screw for quick installation Quality and reliability in XXXL The EJOT STR principle is available for insulation • 100% functional control: the selfembedding of the anchor thicknesses of up to 400 mm the perfect fastener washer signals secure installation for low and zero energy buildings. Arche Nebra, Wangen Rear Ventilated Facade Arche Nebra, Wangen History and design melt together in the architecture of the vistors centre "Arche Nebra". In addition to a planetarium on 2.100 m² floor space the story of the over 3600 year old "Nebra Sky Disc" is also told and this way a connection between archaeology and astronoy is made. The seemingly floating building looks like a motive on the sky disc from the Bronze Age and it points like an over dimensional hand to the find spot. The golden facade and the glass front mirror the earth and sky in a mystical way, depending on the location of the sun. Year of construction: 2007 Owner: Credit Suisse Asset Management Immobilien KAG mbH Architect: HOLZER KOBLER ARCHITEKTUREN EJOT products: EJOT facade anchor, EJOT anchor bolt BZ plus EJOT® facade anchor EJOT® anchor bolt BZ plus Embedment of metal and timber substructures Embedment in cracked concrete and chlorinated in perforated brick, solid brick masonry and concrete atmospheres Technical advantages: Technical advantages: • tested and with German approval • tested and with European Technical Approval • 50 years service life • can also be used in concrete if concrete cracks are a • special anchors for various building material possibility • anchor diameter 8, 10 and 14 mm • 50 years service life • zincplated steel screws and stainless steel screws • anchor diameter 8, 10, 12, 16 and 20 mm • optimum design of the head geometry: suitable for metal • available in zincplated steel and A4 stainless steel and wood parts • broad length range in all diameters • use of a highgrade plastic material: Polyamide • easy installation and high assembly safety • broad length range for all anchor types • very high load bearing capacity even at the concrete edge area or • easy installation and high assembly safety with small distance between centers • very high load bearing capacity due to optimised expansion geometry New Exhibition Stuttgart Flat Roofing New Exhibition Stuttgart The new Messe Stuttgart is one of the largest and most modern trade fair centres in Germany. With 105.200 m² exhibition space and a conference centre with 3.500 seats and 4.000 parking spaces in the car park it is one of the most successful locations in the heart of Europe. Because of the unique transparent glass architecture all rooms of the building are Day Light flooded. Together with the infrastructure, the outstanding prerequisites for up to 10.000 seats are created. The eyecatching roof form of the Messe are the highlight of the building design. Start of construction: August/2004 Completion: September/2007 Owner: Projektgesellschaft Neue Messe Stuttgart GmbH Floor space: 130.000 m² Award: European Award of Steel Structure 2007 EJOT Products: EJOT® HTKM / TKR12095/50 EJOT® HTK EJOT® Dabo® Telescope stress plate Screw TKR with bugle head Technical advantages: Technical advantages: • made of highgrade polyamide • casehardened steel • collated • Climadur coated Particularly suitable: Particularly suitable: • for new construction • for sheet steel substructures • support thread designed to engage in the stress plate ≥ 0,75 mm ≤ 1 mm for resistance to imposed loads • in combination with HTK 50 • to reduce thermal bridges • secure mechanical fixing of insulation onto profiled steel sheet or roof boarding • stress plate made of highgrade polyamide (longterm resistant) • no loosening •