705i(G) cover_cover.qxp 2010-11-25 오후 4:20 페이지 1
OPERATING INSTRUCTIONS
RD-705i NETWORK AV RECEIVER
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 2 ENGLISh Introduction AUSTRALIA • • • • ■Notes ontheACpowercordandwalloutlet. • • Donotletinsecticides,benzene,andthinnercomeincontact • • • • • • • • • READ THISBEFOREOPERATING YOUR UNIT CAUTION FOR YOURSAFETY CAUTION WARNING EUROPE Note : Caution regardinginstallation Do notblockventilationopeningsorstackotherequipmentonthetop. for longperiodsoftime. Disconnect theplugfromwalloutlet whennotusingtheunit are usingiseasilyaccessible. When settingupthisproduct,makesure thattheACoutletyou disconnect theplugfromwallsocketoutlet. To completelydisconnectthisproductfromthemains, been turnedoff. as longitisconnectedtothewalloutlet,evenifunithas The unitisnotdisconnectedfromtheACpowersource(mains) Never disassembleormodifytheunitinanyway. the unit. No objectsfilledwithliquids,suchasvases,shallbeplacedon The unitshallnotbeexposedtodrippingorsplashingforuse. Please becaretheenvironmentalaspectsofbatterydisposal. placed ontheunit. No nakedflamesources,suchaslightedcandles,shouldbe etc. openings withitems,suchasnewspapers,table-cloths,curtains, The ventilationshouldnotbeimpededbycoveringthe Do notletforeignobjectsintheunit. Keep theunitfreefrommoisture,water,anddust. that isexposedtodirectsunlightorheatingequipment. Avoid installationinextremelyhotorcoldlocations,anarea Leave aspacearoundtheunitforsufficientventilation. with theset For heat dispersal, do not install this unit in a confined space such as a bookcase or similar enclosure. . : TO REDUCE ThE RISk OF FIRE OR ELECTRIC ShOCk, DO NOT ExPOSE ThIS APPLIANCE TO RAIN OR mOISTURE. : TO REDUCETHERISK OFELECTRICSHOCK, PERSONNEL. REFER SERVICINGTOQUALIFIEDSERVICE NO USER-SERVICEABLEPARTSINSIDE. DO NOTREMOVECOVER(ORBACK). 240 V 220 V - All unitsaresuitableforuseonsupplies220-240VAC. PAN-EUROPEAN UNIFIEDVOLTAGE in anydoubtabouttheeffectiveearthingofpowerpoint,consultaqualifiedelectrician. does notimplythatthepowerpointisearthedandinstallationcompletelysafe.Foryoursafety,if Improper extensioncordsareamajorcauseoffatalities.Thefactthattheequipmentoperatessatisfactorily be three-core and be correctly wired to provide connectionwhich is effectively to earth. earthed through the normal householdTo ensure wiring.safe operation, Extension the cords three-pin used with plug the supplied equipmentUnits mustshipped must be insertedto Australia only areinto designed a standard for three-pinoperation poweron 230 point V AC only. STANDBY POWER PHONES NOFF ON EU I F.AUX SETUP MIC
NETWORK AV RECEIVER
RD - 705i
SPEAKER ON / OFF
AUDIO ASSIGN RETURN ON / STANDBY
TONE AUTO /MANUAL CH.LEVEL
MAIN MENU EU ENTER / MEMO SETUP SURROUND
SOUND STEREO TUNE VIDEO INPUT PRESET AUDIO BAND
V/1A / 5V USB
MASTER VOLUME
IE L AUDIO R L VIDEO VIDEO 4 2 a riskofelectricshocktopersons. enclosure thatmaybeofsufficientmagnitudetoconstitute uninsulated "dangerousvoltage"withintheproduct's This symbolisintendedtoalerttheuserpresenceof instructions intheliteratureaccompanyingappliance. important operatingandmaintenance(servicing) This symbolisintendedtoalerttheuserpresenceof that thisbatteriescontainslead. The signPbbelowthesymbolforbatteries indicates Note for the battery symbol (bottom two symbol examples): method ofdiposal. local authoritiesordealerandaskforthecorrect you wishtodiscardtheseitems,pleasecontactyour These symbolsareonlyvalidintheEuropeanUnion.If European Union] [Information onDisposalinotherCountriesoutsidethe sale whereyoupurchasedtheitems. municipality, yourwastediposalserviceorthepointof old productsandbatteries,pleasecontactyourlocal For moreinformationaboutcollectionandrecyclingof inappropriate wastehandling. environment whichcouldotherwisearisefrom any potentialnegativeeffectsonhumanhealthandthe you willhelptosavevaluableresourcesandprevent By disposingoftheseproductsandbatteriescorrectly, legislation. collection points,inaccordancewithyournational used batteries,pleasetakethemtoapplicable treatment, recoveryandrecyclingofoldproducts mixed withgeneralhouseholdwaste.Forproper and electronicproductsbatteriesshouldnotbe accompanying documentsmeanthatusedelectrical These symbolsontheproducts,packaging,and/or Old EquipmentandusedBatteries Information forUsersonCollectionandDisposalof RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 3 ytmStp|41 System Setup Operations |13 Remote Controls |11 Front PanelControls |4 System Connections Introduction pcfctos|61 |60 Specifications Troubleshooting Guide CONTENTS • SETTINGTHESYSTEMSETUP • CONFIRMINGTHEHDMIFUNCTION • OTHERFUNCTIONS • RECORDING • LISTENINGTOINTERNETRADIOBROADCASTS,MUSICFILES • LISTENINGTORDSBROADCASTS(FMONLY) • LISTENINGTORADIOBROADCASTS • ENJOYINGSURROUNDSOUND • SURROUNDSOUND • LISTENINGTOAPROGRAMSOURCE • LOADINGBATTERIES • REMOTECONTROLOPERATIONRANGE • READTHISBEFOREOPERATINGYOURUNIT • SETTINGTHESPEAKER/ROOMEQSETUP • SETTINGTHEINPUTSETUP • SETTINGTHEPARAMETERSETUP • SETTINGTHEMULTIROOMSETUP • SETTINGTHECHLEVELSETUP ETN H DISETUP • SETTINGTHEHDMI (RDS Tuner(RegionalOptionforsomecountriesinEurope,etc.)) | 38 | 39 | 17 | 14 | 58 | 45 | 43 | 19 | 53 | 56 | 55 | 40 | 24 | 15 | 14 | 47 | 26 | 2 3 | 28
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 4 ENGLISh • Make connectionsfirmlyandcorrectly.Ifnot,itcancauselossofsound,noiseordamagetothereceiver. • Be suretoobservethecolorcodingwhenconnectingaudio,videoandspeakercords. • Since differentcomponentsoftenhaveterminalnames,carefullyreadtheoperatinginstructionsofcomponent • Please becertainthatthisunitisunpluggedfromtheACoutletbeforemakinganyconnections. System Connections 1. connected. • If the reception is poor with the AM loop antenna, an AM outdoor antenna can be used in place of place in used be can antenna outdoor AM an antenna, loop AM the with poor is reception the • If • Place the AM loop antenna as far as possible from the receiver, TV set, speaker cords and the AC the and cords speaker set, TV receiver, the from possible as far as antenna loop AM the • Place • Change the position of the FM indoor antenna until you get CONNECTING ANTENNAS the AMloopantenna. input cordandsetittoadirection forthebestreception. the bestreceptionofyourfavoriteFMstations. 11 2 H 11 DMI V VIDEO 2 V IDEO 1 IDEO 3 OUT MONIT O IN UT OR ASSIGNAB DI GITAL IN 3 7 6 2 1 432 ( OPT 1 (CD) OPT 2 (V2) COAX 1 (AUX) COAX 2 V1) LE 2 OUT IE AU VIDEO 1 DVIDEO 1 CD RL ROOM 2 8 OUT XV
SUBWOOFER AU VIDEO 2 (iPod) PRE IDEO 3 LO 5 GND DIO AM OUT ANTENNA OP IN IN R R L L FM 75
LO G AM ANTENNA ND OP FM 75 3 VIDEO 2 VIDEO (i Pod) IN N18041 VIDEO 9 1VI 5V / 1A MONITOR OUT OUT (WiFi) DEO 1 USB DI GILINK-i R FRONT 4 (6 ) LRL symbol ar Manufactured under li Manufactured u 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwi patents iss are trad • A 75Ω outdoor FM antenna may be used to further SURR emarks of DTS, Inc. © DTS, (6 ) e tradem mrv te eeto. icnet h indoor the Disconnect antenna beforereplacingitwiththeoutdoorone. reception. the improve ued & p OUND SPEA nder license ending. arks of Dolby L cense from Dolby Laboratories. Dol KERS DTS and the Symbol are registe under U.S. aboratori CENTER Inc. All (6 ) Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; es. Rights Rese LO GND AM ANTENNA F .HEI OP SURROUND rved. FM 75 RL GHT / ROOM 2 / BiA by red trademarks & the DTS logos , Pro Logic, and th 7, 8 (6 ) BAC K / e do MP uble-D
de
AVIS : RISQUE DE CHOC SN. WAR POWER CONSUM NETWORK AV RE P OWER SOU NING
: SHO RCE CK HAZARD-DO NOT ASSEMBLED INCHINA LO GND CEIV ELECTRIQUE-NE PTION AM ANTENNA DESIGNED INUSA 10 OP 230V 50Hz FM 75 ER RD -
705i 230W OPEN. PAS OUVRIR. RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 5 • You canconnectAppleiPodtothisreceiverviaSherwooddock.IfdockisconnectedDIGILINK-ijack • When recordingvideoprogramsourcesthroughthe(composite)VIDEO1OUTjackorviewing ■Notes : • For yourreference,theexcellenceinpicturequalityisasfollows:"HDMI”>"(composite)VIDEO". • There are(composite)VIDEOjacksforanalogvideoconnectionsandtheHDMIconnectorsdigitalaudio • Connect thejacksofVIDEO3tovideocomponentinsameway. • The jacksofVIDEO2/VIDEO3canalsobeconnectedtoanadditionalvideocomponentsuchasacableTVtunerorsatellite • The jacksofVIDEO1mayalsobeconnectedtoaDVDrecorderorotherdigitalvideorecordingcomponent. 2 The VIDEO3INscanbeconnenctedtoanadditionalvideocomponentwithout(composite)connection. corresponding operationisperformed. control youriPodwiththeunit’sremotecontrol,VIDEO2/iPodisautomaticallyselectedasaninputsourceand for systemcontrol,youshouldconnectitsvideoandaudiojackstothe“VIDEO2”ofthisreceiver.Because,when components suchasBDplayer,DVDetc. through the(composite)MONITOROUTjack,youmustconnectVIDEOINjacktovideoplayback connections. system. For details,refertotheoperatinginstructionsofcomponentbeconnected. . CONNECTING VIDEOCOmPONENTS HDMI VIDEO 1 V IDEO 2 OUT MONIT IN OUT OR 5 O UT IE AU VIDEO 1 DVIDEO 1 CD XV AU VIDEO 2 (iPod) IDEO 3 DIO IN IN R R L L VI VI (i DEO 2 DEO Pod) IN VIDEO VIDEO 1VI MONITOR MONITOR OUT VI OUT DEO 1 OUT OUT DEO 1
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 6 ENGLISh • When recordingaudiosignals,connecttheAUDIOIN/OUTjacksof“VIDEO1”toequipmentsuchasatape • The AUXINscanbeconnectedtoanadditionalaudiocomponentsuchasatapedeck,MDplayer,etc. 3. • When youwanttoenjoyonlythepictureonyourTV,notsound,shouldsetHDMIAUDIOOUTAMP • If theresolutionsofvideosignalswhichareoutputfromMONITOROUTsandyourmonitorTVnotmatched, • The videosignalswillnotbeoutputproperlyifacomponentincompatiblewithHDCPisconnected. • The audiosignalsfromtheHDMIconnector(includingsamplingfrequencyandbitlength)maybelimitedby • Among thecomponentsthatsupportHDMI,somecancontrolotherviaHDMIconnector. • For stablesignaltransfer,werecommendusingHDMIcablesthatareamaximumof5metersinlength. ■Notes : • HDMI, theHDMIlogoandHigh-DefinitionMultimediaInterfacearetrademarksorregisteredoflicensing • This unitsupportsHDCP(High-bandwidthDigitalContentsProtection),technologytoprotectcopyrightofdigitalvideosignals ■Copyright protectionsystem • The HDMIvideostreamsignals(videosignals)aretheoreticallycompatiblewithDVI-D.WhenconnectingtoaTVmonitor, • The HDMIconnectioncancarryuncompresseddigitalvideosignalsandaudiosignals. • You canconnectthesourcecomponent(DVDplayer,etc.)todisplay(TV,projector,throughthisreceiver ■hDmI (highDefinitionmultimediaInterface)connection:(*) Continued SETUP” onpage58. For detailsontheHDMIfunction,referto“CONFIRMINGTHEFUNCTION”page40and“SETTING deck, anMDrecorder,etc. AUDIO OUT"onpage58.) output thedigitalaudiosignalfromHDMIMONITOROUTofthisreceiver.(Fordetails,referto"Whenselecting player, etc.)toonewhichthemonitorTVcanhandle.(Fordetails,referoperatinginstructionsofsourcecomponent.) picture isnotclear,naturalordisplayed.Inthiscase,changethesettingofresolutiononsourcecomponent(BD component thatisconnected. LLC. against illegalduplication.HDCPmustalsobesupportedonthecomponentsconnectedtothisunit. etc., equippedwithDVI-Dconnector,itispossibletoconnectusingacommerciallyavailableHDMI-DVIconvertercord. with usingacommerciallyavailableHDMIcord. audio signalsonthisreceiver.(Fordetails,referto"WhenselectingtheHDMIAUDIOOUT"page58.) Since theHDMI-to-DVIconnectioncannotcarryanyaudiosignals,setHDMIAUDIOOUTtoAMPheardigital CONNECTING AUDIOCOmPONENTS CD player OUT IE AUX VIDEO 1 DVIDEO 1 CD 6 AUX Tape deck, MDplayer, etc. RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 7 • Thedefaultsettingsareasfollows: • If yourDIGITALconnectionsaredifferentfromdefaultsettings,youshouldassigntheINsusedwith“When • If youconnecttheDIGITALINstoyourcomponents,itiseasierdosofollowingdefaultsettings. ■Digital inputdefaultsettings • Be suretomakeeitheraOPTICALorCOAXIALDIGITAL ■Note : • Some ofthecommerciallyavailableopticalfibercordscannotbe • When makingtheCOAXIALDIGITALconnection,besuretousea • For details,refertotheoperatinginstructionsofcomponent • A digitalinputshouldbeconnectedtothecomponentssuchasa • The OPTICALandtheCOAXIALDIGITALOUTsofcomponents 4. • Connect thisjacktotheDIGILINK-iofSherwood 6. • To emphasizethedeepbasssounds,connectapowered 5. OPTICAL IN1:VIDEO1,IN2CD,COAXIALIN12/iPod,2AUX subwoofer. selecting theDIGITALIN”procedureonpage46. connection oneachcomponent.(Youdon’tneedtodoboth.) service organization. be connectedtoyourequipment,consultdealerornearest used fortheequipment.Ifthereisanopticalfibercordwhichcannot 75Ω COAXIALcord,notaconventionalAUDIOcord. connected. Surround, DolbyDigitalorPCMformatdigitalsignals,etc. CD player,DVDetc.capableofoutputtingDTSDigital INs. that areconnectedtothisunitcanbetheseDIGITAL unit’s remotecontrol. iPod dockthatallowsyoutocontrolthewith CONNECTING FORSYSTEmCONTROL CONNECTING SUBWOOFERPREOUT CONNECTING DIGITALINS 7 SUBWOOFER DI PRE GILINK-i OUT ASSIGNAB DI GITAL IN (V1) OP ( OPT 2 ( COAX 1 (A COAX 2 CD) V2) UX) T 1 LE
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 8 ENGLISh • Never touchthespeakerterminalswhileACinput • Do notletthebarespeakerwirestoucheachotheror • Be suretousethespeakerswithimpedanceof6 Caution : • Before makingbi-ampconnections,removetheshort- ■Note : • Connect theFRONTandSURROUNDBACK • Some speakersareequippedwithtwosetsofinput ■Front Bi-AmpConnections. • For ROOM2playback,connectthe ■ROOm 2speakers • When listeninginDolbyProLogicIIzmode,connect ■Front heightspeakers • When usingonlyonesurroundbackspeaker,you ■Surround backspeakers • Depending onhowtousethespeakers,youshould ※ • After installingthespeakers,firstadjustspeaker • For installingthespeakers,referto"Speaker • Be suretoconnectspeakersfirmlyandcorrectly 7. EQ SETUP"onpage47.) (For details,referto"SETTINGTHESPEAKER/ROOM result inelectricshocks. cord isconnectedtothewallACoutlet.Doingsocould and/or thespeakers. any metalpartofthisunit.Thiscoulddamageunit ohms orabove. circuiting barsfromtheterminalsofyourspeakers. capable speakers.) refer totheoperatinginstructionsofyourbi-amp- channels tothebi-amp-capablespeakers.(Fordetails, terminals, forbi-amplification. on page10.) 2 OUTJACKSORROOMSPEAKERTERMINALS” speakers. (Fordetails,referto“CONNECTINGROOM the frontheightspeakers. should connectittoSURROUNDBACKLEFTchannel. to “WhenselectingtheAMPASSIGN”onpage43.) assign thepoweramplifiercorrectly.(Fordetails,refer layout. settings accordingtoyourenvironmentandspeaker placement" onpage9. unnatural andlackbass. the speakerconnectionisincorrect,soundwillbe will beheardfromthespeakers,andifpolarityof polarity(+ and-).Iftheconnectionsarefaulty,nosound according tothechannel(leftandright) follows. ROOM 2speakersorbi-ampcapableas to surroundbackspeakers,frontheight The SURROUNDBACKchannelscanbeconnected CONNECTING SPEAkERS 8 RLRL RLRL FRONT FRONT (6 ) (6 ) SURR SURR (6 ) (6 ) OUND OUND SP SP EA EA KERS KERS CENTER CENTER Surround back/ (6 ) (6 ) ROOM 2right Front height/ F.H F.H EI SURROUND RL EI SURROUND RL GHT /ROOM 2 / BiA GHT /ROOM 2 / BiA (6 ) (6 ) ROOM 2left Front height/ Surround back/ BACK / BACK / MP MP RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 9 ■Notes : • Place thefrontheightspeakersatleast1meter(3.3feet) • • ■ • The subwooferreproducespowerfuldeepbasssounds. ■ • We recommendinstallingthesurroundbackspeaker(s)at • When usingasinglesurroundbackspeaker,placeitat • Place thesurroundbackspeakersatfacing ■ • Place thesurroundspeakersapproximately60to90cm(2 ■ • Place eachspeakersothatsoundisaimedatthelocation • Place thecenterspeakerbetweenfrontleftandright • Place thefrontspeakerswiththeirsurfacesasflush ■ of speakerplacementandrecommendationsareasfollows: your roomandthewallcoverings,etc.Thetypicalexample Ideal speakerplacementvariesdependingonthesizeof ■ Continued 1. Stripawayapprox.10mm Place asubwooferanywhereinthefrontasdesired. directly abovethefrontspeakers. back lesssharp. and makingthesenseofmovementfromfrontto TV orscreenatthefrontcenter,resultingininterference the surroundbackchannelsignalsfromreflectingoff a slightlydownwardfacingangle.Thiseffectivelyprevents (0 to20cm)thanthesurroundspeakers. the rearcenterfacingfrontataslightlyhigherposition front atanarrowerdistancethanspeakers. direct leftandrightofthemorslightlybehind. to 3feet)abovetheearlevelofaseatedlisteneron of thelistener’searswhenatmainlisteningposition. the frontspeakers. speakers andnofurtherfromthelisteningpositionthan with TVormonitorscreenaspossible. Speaker placement left andrightcenterspeakers. Dolby ProLogicIIzplayback) the subwoofershouldbefullrangespeakers. the TVpicture,useonlymagneticallyshieldedfront Connecting speakerwire To obtainthebestsurroundeffects,speakersexcept When usingaconventionalTV,toavoidinterferencewith Front heightleftandrightspeakers(Recomendedfor Subwoofer Surround backleftandrightspeakers Surround leftandrightspeakers Front leftandrightspeakerscenterspeaker tight. then twistthewireends (3/8 inch)ofwireinsulation, 2. Loosenbyturningthe clockwise. speaker terminalcounter- 9 downward Point slightly 7. Surroundrightspeaker 6. Surroundleftspeaker 5. Frontrightspeaker 4. Centerspeaker 3. Subwoofer 2. Frontleftspeaker 1. TVorScreen • 7.1channelspeakersystem(forDolbyProLogicIIz • 7.1channelspeakersystem: • 6.1channelspeakersystem: • 5.1channelspeakersystem: - 5.1channelspeakersystem+surroundback(8,9) - 5.1channelspeakersystem+surroundcenter(10) - front(2,5),center(4),surround(6,7),subwoofer(3) 3. Insertthebarepartof - 5.1channelspeakersystem+frontheight(11,12) playback) : wire. 11 At least1m Front heightspeaker 13. Listeningposition 12. Frontheightrightspeaker 11. Frontheightleftspeaker 10. Surroundcenterspeaker 9. Surroundbackrightspeaker 8. Surroundbackleftspeaker 13 4. Tightenbyturningit clockwise. 12
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 10
8. CONNECTING ROOm 2 OUT JACkS OR ROOm 2 SPEAkER TERmINALS
• ROOM 2 playback feature allows you to play a Another room(Room 2) different program source in another room as well as one source in the main room at the same time.
• For ROOM 2 playback, connect the ROOM 2 OUT OUT jacks to the amplifier installed in another room, or RLROOM 2 connect the ROOM 2 speaker terminals to the speakers. ENGLISh • To drive the speakers connected to the ROOM 2 speaker terminals, you should assign the power amplifier to “ROOM 2”. (For details, refer to “When selecting the AMP ASSIGN” on page 43.) SURROUND BACK / F.HEIGHT / ROOM 2 / BiAMP ■Note : (6 ) • To minimize hum or noise, use high quality RL connection cords.
9. CONNECTING TO NETWORk
• To connect this unit to a broadband home network wirelessly to listen to internet radio broadcast, connect the supplied 11N Wireless USB adapter to the USB connector either on the rear panel or on the front panel. • This unit is equipped with an IEEE802.11n(2.4 GHz band only) wireless module, which also supports the 802.11 b/g standards. ■Notes : • For safe opertaion, turn the power off before connecting or disconnecting the supplied 11N Wireless USB adapter. • After making a broadband internet connection, you should set the communication settings. (For details, see “When selecting “Network”” on page 36.) • When using a broadband internet connection, a contract with an internet service provider is required. For more information, contact your nearest internet service provider. • Refer to the operating instructions of the equipment because the connected equipment and connection method may differ depending on your internet environment.
USB (WiFi)
5V / 1A
Router with access point * An access point is a device that allows you to connect your home network wirelessly.
10. AC INPUT CORD
• Plug the cord into a wall AC outlet.
11. TERmINALS FOR UPGRADES
• These terminals may be used in the future to update the operating software so that it will be able to support new digital audio formats, etc. ■Note : • Programming for upgrades requires specialized programming knowledge and for that reason we recommend that it only be done by qualified installers.
10 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 11
Front Panel Controls
1 2 3 4 12 5 7 68
NETWORK AV RECEIVER RD-705i
MASTER VOLUME STANDBY ENGLISh
SOUND INPUT POWER ON / STANDBY AUTO / MANUAL SURROUND STEREO VIDEO AUDIO
ON OFF USB VIDEO 4 5V / 1A VIDEO L AUDIO R PHONES SETUP MIC F.AUX SPEAKER AUDIO ASSIGN TONE CH.LEVEL SETUP ENTER / MEMO TUNE PRESET BAND
ON / OFF RETURN MAIN MENU
9 10 11 13 1514 16 17 18 19 20 21 22 23 24 25
1. POWER switch 14. STEREO button 2. STANDBY indicator 15. SPEAKER button 3. POWER ON/STANDBY button 16. AUDIO ASSIGN button 4. REMOTE SENSOR 17. TONE MODE button 5. FLUORESCENT DISPLAY 18. CHANNEL LEVEL button For details, see below. 19. SETUP button 6. VIDEO INPUT SELECTOR button 20. ENTER/MEMORY button 7. AUDIO INPUT SELECTOR button 21. TUNING UP/DOWN(+/-), 8. MASTER VOLUME knob CURSOR LEFT/RIGHT(◀/▶) buttons 9. HEADPHONE jack 22. PRESET UP/DOWN(+/-), 10. SETUP MIC jack CURSOR UP/DOWN(▲/▼) buttons For details, see next page. 23. BAND button 11. FRONT AUX IN jack 24. USB connector For details, see next page. For details, see next page. 12. AUTO/MANUAL button 25. VIDEO 4 IN jacks 13. SURROUND MODE UP/DOWN(▶/◀) buttons For details, see next page. ■FLUORESCENT DISPLAY
12 345678910 11 12
1. Input, frequency, volume level, surround 7. ROOM 2 indicator mode, operating information, etc. 8. REPEAT indicator 2. Surround mode indicators 9. SHUFFLE indicator 3. AUTO indicator 10. FAVORITE indicator 4. DIGITAL INPUT indicator 11. SIGNAL STRENGTH OF INTENET RADIO indicator 5. HDMI indicator 12. SLEEP indicator 6. DIRECT indicator
11 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 12 ENGLISh ■ ■USB CONNETOR ■FRONT AUxINJACk ■SETUP mICJACk • The VIDEO4INjacksmaybealsoconnectedtoanadditionalvideo VIDEO 4INJACkS component suchasacamcorder,videogameplayer,etc. • After USBplayback,removethememorydeviceinstopmode ■ • An USBmemorydevicecanbeconnectedtotheconnectoreither • When connectingthisjacktoanMP3player,etc.,youshouldusethestereominicord,notamonocord. ■ • The FRONTAUXINjackcanbeconnectedtoadditionalaudiocomponentssuchasanMP3player,etc. • After youhavecompletedtheautosetupprocedure,disconnectmicrophone. • Because themicrophoneforAutoSetupisdesignedusewiththisreceiver,donotaotherthan ■Notes: • To useAutoSetupfunction,connectthesuppliedmicrophonetoSETUPMICjack.(Fordetails,refer"When or thestandbymode. “music library””onpage32.) stored onitthroughthisunit.(Fordetails,referto“Whenselecting on thefrontpanelorreartolistenMP3WMAfiles the onesuppliedwiththisreceiver. selecting theAUTOSETUP"onpage47.) Note : Note : F.AUX SETUP MIC 12 Microphone V/1A / 5V USB V/1A / 5V USB IE L AUDIOR L VIDEO IE L AUDIOR L VIDEO USB memorydevice VIDEO 4 VIDEO 4 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 13 Remote Controls 13 ENTER buttons CURSOR CONTROL( ,), FORWARD SKIP())buttons BACKWARD SKIP(), REPEAT( ),SHUFFLE( ), PAUSE( ),PLAY( ),STOP( ), (NETWORK, RATING (), NETWORK CONTROL ROOM 2button
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 14 ENGLISh 1. LOADING BATTERIES REMOTE CONTROL OPERATION RANGE Remove thecover. STANDBY POWER PHONES NOFF ON EU I F.AUX SETUP MIC NETWORK AVRECEIVER RD - 705i SPEAKER ON /OFF AUDIO ASSIGN RETURN ON /STANDBY TONE AUTO /MANUAL CH.LEVEL MAIN MENU EU ENTER /MEMO SETUP SURROUND SOUND STEREO TUNE VIDEO INPUT PRESET AUDIO BAND • Use theremotecontrolunitwithinarangeofabout7meters(23 V/1A / 5V USB feet) andanglesofupto30degreesaimingattheremotesensor. MASTER VOLUME VIDEO L AUDIO AUDIO R L VIDEO VIDEO 4 14 2. • Do notusetherechargeablebatteries(Ni-Cdtype). • Remove thebatterieswhentheyarenotusedfora long time. the polarity. Load twobatteries("AAA"size,1.5V)matching RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 15 • Then thepoweriscutoffandSTANDBY • To switch the power off, push the POWER • The STANDBYindicatorlightsup. • Enter thestandbymode. Operations Before operation • When usingtheheadphonesforprivatelistening,press • Then “SPEAKERON”isdisplayedandthesoundcanbe • On theremotecontrol,pressPOWERONbuttonto • Each time the POWER ON/STANDBY button on the front 3. 2. 1. ■Note : operation readiness. amount ofcurrentisretainedtosupportthe disconnected fromtheACmainsandasmall This meansthatthereceiverisnot indicator goesoff. switch again. ON /STANDBY (“SPEAKER OFF”isdisplayed). SPEAKER buttonagaintoswitchthespeakersoff terminals. heard fromthespeakersconnectedtospeaker enter thestandbymode. enter theoperatingmodeorpressSTANDBYbuttonto operating mode or off to enter the standby mode. panel is pressed, the receiver is turned on to enter the LISTENING TO A PROGRAM SOURCE VIDEO In thestandbymode,turnpoweron. Select thedesiredinputsource. Switch thespeakerson. INPUT procedures. (Fordetails,referto"SystemSetup"onpage41.) Before operatingthisreceiver,firstsetunitasdesiredforoptimumperformance,doingthesystemsetup AUDIO BAND POWER NOFF ON 15 * :OnlywhentheHDMICONTROLissettoON,youcan • Each timethe“VIDEO”buttononfrontpanelis * If it is set to “DIGITAL” or “HDMI”, “OPTI.1”, etc or “HDMI1”, etc * If the AUDIO MODE is set to “AUTO”, the “D” or “HDMI” flickers • When the selected digital input is not connected, this unit • The sound from the component connected to the selected digital • The selected digital input or analog input is automatically • When TV, NET/USB or tuner is selected as an input source, the • When VIDEO 1 ~ 3 is selected and the corresponding HDMI IN ■ • Each timethisbuttonispressed,thecorrespondinginput • Each timethe“AUDIO”buttononfrontpanelis • When selectingNET/USB,referto“LISTENINGTO • Each timetheBANDbutton(orTUNERbuttonon → is selected When an input source other than TV, NET/USB, tuner • To hearthesoundfromselecteddigitalinput,you 4. input can be heard regardless of the selected input source. page 45.) menu. (For details, refer to “SETTING THE INPUT SETUP” on assigned to the corresponding input source on the INPUT setup → → operates as follows depending on the AUDIO MODE setting. digital input cannot be selected. the AUDIO MODE setting (“AUTO”, “HDMI”). is connected, the digital input cannot be selected depending on flickers, meaning no sound is heard. and the analog input is automatically selected. pressed, theinputsourcechangesasfollows: is selectedasfollows: pressed, theinputsourcechangesasfollows: FM MONO→ FM STEREO→ → Notes : remote control)ispressed,thebandchangesasfollows: page 28. INTERNET RADIOBROADCASTS,MUSICFILES”on INPUT SETUP”onpage45.) SETUP menu.(Fordetails,referto“SETTINGTHE should settheAUDIOMODEcorrectlyonINPUT (For details,referto“WhenselectingtheHDMI hear thedigitalaudiosignalsfromTVviaaHDMIcable. OPTI.1 → CD → CONTROL” onpage58.) VIDEO 1→ Select the digital or the analog input connected as desired. AUDIO ASSIGN F.AUX→ TV*→ AUX→ RETURN OPTI.2 → V2/iPOD → COAX.1 → VIDEO 3→ NET/USB → COAX.2 → AM (Frequency display) VIDEO 4 Tuner ANALOG
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 16 ENGLISh • To resumetheprevioussoundlevel,pressitagain. • “MUTING” isdisplayed. • When playing back the program sources with surround 8. 7. 6. 5. • Be carefulnottosetthevolumetoohighwhenusing ■Note: • When listeningtoaDTSorDolbyDigitalprogramsource, • Be suretoswitchthespeakersoff. ONUP DOWN page 19. sound, refer to “ENJOYING SURROUND SOUND” on headphones. mode”on page20.) automatically. (Fordetails,referto“2CHdownmix button issettooff,itentersthe2CHdownmixmode if theheadphonesarepluggedinandSPEAKER MASTER VOLUME To mutethesound. Operate theselectedcomponentforplayback. To listenwiththeheadphones. Adjust the(overall)volume. PHONES MUTE 16 • If the tone display disappears, start from the step 9 again. • Extreme settingsathighvolumemay damageyour • In general,werecommendthebass andtrebletobe • The tonelevelcanbeadjustedwithintherangeof-10~ ■ • Each timethesebuttonsarepressed,thetonemodeis → • Each time these buttons are pressed, the tone is selected as 10. 9. 12. 11. • The tonemodeis OFF :Tolistentoaprogramsourcewithoutthe speakers. adjusted to0dB(flatlevel). +10 dB. selected asfollows: follows: seconds. displayed forseveral Adjusting thetone(bassandtreble) ON :Toadjustthetoneforyourtaste.("DIR"goesoff.) ↕ (bass and treble). When the TONE is set to ON to adjust the tone BASS Enter the tone mode. to selectthedesiredtone. Press theCURSORUP(▲)/DOWN(▼)buttons buttons toselectthedesiredtonemode. Press theCURSORLEFT(◀)/RIGHT(▶) buttons toadjusttheselectedtoneasdesired. Press theCURSORLEFT(◀)/RIGHT(▶) TUNE PRESET tone effect.("DIR"lightsup.) TONE ↔ TREBLE ↔ OO TO MM 1 0 P MH FM TONE: ON← E: NE 87 FF 50 z. -30 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 17 and signal resolution. uncompressed digital audio with 96 kHz/24 bit sampling rate this new DTS format offers up to 7.1 discrete channels of space offered by the new Blu-ray and HD DVD disc formats, DTS logo. fidelity reproduction. Use it with DVDs and CDs bearing the 5.1 discrete channels and uses less compression for high DTS Digital Surround(also called simply DTS) supports up to ■ ⓒ and DTS-HD Master Audio are trademarks of DTS, Inc. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD issued & pending. 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; Manufactured under license under U.S. Patent #'s: 5,451,942; Designed to take full advantage of the additional storage ■ 96 kHz/24 bit sampling rate and signal resolution. audio format from DTS. It supports up to 7.1 channels with formats Blu-ray and HD DVD, this is the latest multi-channel Developed for use with HDTV, including the new video disc ■ bearing the DTS 96/24 logo. 24 bit resolution, providing superior fidelity. Use it with DVDs This is high resolution DTS with a 96 kHz sampling rate and ■ "DTS Neo : 6 Music" suited for playing music. includes "DTS Neo : 6 Cinema" suited for playing movies and 7.1 channel surround playback with 2 channel sources. It DTS Neo : 6 is a matrix decoding technology for achieving ■ ES logo. through matrix encoding. Use it with DVDs bearing surroundthe DTS- back channel to the DTS digital surround Thissound is a 6.1 channel discrete digital audio format■ inserting a ES Discrete sound track. DVDs bearing the DTS-ES logo, especially those withsounds a DTS- that pan across the surround channels. Use imagingit with and 360 degrees sound localization, perfectseven for totally separate audio channels provide bettersurround spatial back channel to the DTS digital surround Thissound. is Thea 6.1 channel discrete digital audio format■ adding a • This receiverincorporatesasophisticatedDigitalSignalProcessorthatallowsyoutocreateoptimumsoundqualityand Surround modes atmosphere inyourpersonalHomeTheater. SURROUND SOUND DTS DigitalSurround DTS-hD master Audio DTS-hD high Resolution Audio DTS 96/24 DTS Neo : 6™ surround DTS -ES™Matrix6.1 DTS-ES™ Discrete6.1 1996-2008 DTS, Inc. All Rights Reserved. 17 trademarks ofDolbyLaboratories. Dolby, ProLogic,andthedouble-D symbolareregistered Manufactured under license from Dolby Laboratories. speakers. channel is monaural, but is played through both surround provide the theater-like surround sound. The surround right and surround). Sources bearing the “ format ” which consists of four channels (front left, center, front Dolby Pro Logic is a specially encoded two channel surround ■Dolby ProLogic Logic IIx surround. Logic II Music and Dolby Pro Logic II Game like Dolby Pro surround. It incudes Dolby Pro Logic II Movie, Dolby Pro Logic II surround will be used instead of Dolby Pro Logic IIx If you are not using any surround back speakers, Dolby Pro ■Dolby ProLogicII Logic IIx Game" suited for playing games. Logic IIx Music" suited for playing music and "Dolby Pro Pro Logic IIx Movie" suited for playing movies, "Dolby Pro dramatic spatial effects and vivid imaging. It includes "Dolby music and movies,video games can also benefit from the sound experience that fully envelopes the listener. As well as playback. It provides a very natural and seamless surround This mode expands any 2-channel source for 7.1-channel ■Dolby ProLogicIIx added depth, and an overall airiness to listening experience. games. Dolby Pro Logic IIz brings enhanced spatial effects, creating a 7.1 channel palyback for music, movies and video This mode adds front height channels to surround sound, ■Dolby ProLogicIIz and signal resolution. lossless audio performance with 96 kHz/24 bit sampling rate this new Dolby format offers up to 7.1 discrete channels of space offered by the new Blu-ray and HD DVD disc formats, Designed to take full advantage of the additional storage ■Dolby TruehD 48 kHz/24-bit sampling rate and signal resolution. audio format from Dolby. It supports up to 7.1 channels with formats Blu-ray and HD DVD, this is the latest multichannel Developed for use with HDTV, including the new video disc ■Dolby DigitalPlus perfect for rotating and fly-by sound effects. and provides an enveloping surround sound experience, channel. The additional channel adds an extra dimension soundtracks that include a matrix-encoded surround back playback. It's especially suited to Dolby Digital EX This mode expands 5.1-channel sources for 6.1/7.1 channel ■Dolby DigitalEx action, just like being in a movie theater or concert hall. digital signals. This will put you right in the middle of the Digital logo includes the recording of up to 5.1 channels of developed by Dolby Laboratories. Discs bearing the Dolby Dolby Digital is the multi-channel digital signal format ■Dolby Digital
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 18
• The following modes apply conventional 2-channel signals ■Classic such as digital PCM or analog stereo signals to high This mode provides the acoustic effects of a large concert performance Digital Signal Processor to recreate sound hall for classical music. fields artificially. Select one of the 11 provided surround modes according to the program source you want to play. ■Rock This mode provides the ambience of a live concert for rock or ■Theater pop music. This mode provides the effect of being in a theater when watching a play. ■Acoustic ENGLISh This mode suitable for acoustic music sources. ■movie This mode provides the effect of being in a movie theater ■Auto Volume Level Control when watching a movie. This mode automatically equalizes playback sound levels if each sound level varies with the music source recorded in a ■hall portable audio player. This mode provides the ambience of a concert hall for classical music sources such as orchestral, chamber music ■Virtual or an instrumental solo. This mode creates a virtual surround sound field through two front speakers. ■Game This mode is suitable for video games. ■multi Ch Stereo This mode is designed for playing background music. The ■Stadium front, surround and surround back channels create a stereo This mode provides the expansive sound field to achieve the image that encompasses the entire area. true stadium effect when watching baseball or soccer games.
For your reference, the sound from each channel can be reproduced according to the surround modes as follows:
Modes Channels FRONT L/R CENTER SURROUND L/R SURROUND BACK/ SUBWOOFER FRONT HEIGHT L/R DTS-HD HIGH RESOLUTION AUDIO/MASTER AUDIO OO O O/— O DTS, DTS 96/24 OO O — O DTS ES DISCRETE/MATRIX OO O O O DTS NEO: 6 CINEMA/MUSIC OO O O —(*) DOLBY DIGITAL PLUS / DOLBY TRUEHD OO O O/— O DOLBY DIGITAL OO O — O DOLBY DIGITAL EX OO O O O DOLBY PRO LOGIC IIz OO O O O DOLBY PRO LOGIC IIx MOVIE/MUSIC/GAME OO O O O DOLBY PRO LOGIC II MOVIE/MUSIC/GAME OO O — O (MULTI) PCM OO O O/— O AUTO VOLUME LEVEL CONTROL/VIRTUAL O —— — —(*) DOLBY PRO LOGIC OO O ——(*) Other Surrounds OO O O —(*) STEREO O —— — —(*)
(*): Depending on the subwoofer setting, the sound from the subwoofer channel may be reproduced.
• Depending on the speaker settings and the number of the encoded channels, etc., the sound from the corresponding channels cannot be reproduced.(For details, refer to "SETTING THE SPEAKER / ROOM EQ SETUP" on page 47.)
18 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 19
ENJOYING SURROUND SOUND
■Note: Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance. (For details, refer to "SETTING THE SPEAKER / ROOM EQ SETUP" on page 47.)
Depending on how to select a surround mode, select the auto surround mode or the manual surround mode.
AUTO/MANUAL • Each time this button is pressed, the mode changes as follows : Auto surround mode : The optimum surround mode will be ("AT" lights up.) automatically selected depending on the signal
format being input. ENGLISh
Manual surround mode : You can select the desired of different ("AT" goes off.) surround modes selectable for the signal being input with using the SURROUND MODE UP/DOWN (>/<) buttons. ■Notes : • Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum surround mode may vary depending on whether the speaker type is set to "NO" or not. • When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.
■When selecting the manual surround mode with pressing the AUTO/mANUAL button on the front panel Select the desired surround mode.
SOUND SURROUND • Each time the SURROUND MODE UP/ DOWN (>/<) buttons are pressed, the surround mode changes depending on the input signal format as follows :
Selectable surround mode Signal format being input “SURR B” : “L2”, “S2”, “L1”, “S1” “SURR B”/”F.HEIGHT” “NO” or “F.HEIGHT”:“LARGE”/”SMALL” Dolby Digital Plus 5.1 ch*1 (DOLBY D+ +PLIIx MOVIE), DOLBY DIGITAL +, DOLBY D++ EX, DOLBY DIGITAL+, DOLBY D+ +PLIIx MUSIC, DSP Surround modes*2 [DOLBY D++PLIIz HEIGHT] Dolby Digital Plus 7.1 ch DOLBY DIGITAL+ Dolby TrueHD 5.1 ch*1 (DOLBY HD+PLIIx MOVIE), DOLBY TrueHD, DOLBY HD+ EX, DOLBY TrueHD, DOLBY HD+ PLIIx MUSIC, DSP Surround modes*2 [DOLBY HD+PLIIz HEIGHT] Dolby TrueHD 7.1 ch DOLBY TrueHD Dolby Digital 5.1 ch, (DOLBY D+PLIIx MOVIE), DOLBY DIGITAL, DOLBY DIGITAL EX, DOLBY DIGITAL, Dolby Digital EX 6.1 ch DOLBY D+PLIIx MUSIC, DSP Surround Modes*2 [DOLBY D+PLIIz HEIGHT] DTS-HD Master Audio 5.1 ch*1, (DTS-HD+PLIIx MOVIE), DTS-HD MASTER or DTS-HD HI RES, DTS-HD MASTER or DTS-HD HI RES, DTS-HD High Resolution Audio 5.1 ch*1 DTS-HD+NEO:6, DTS-HD+PLIIx MUSIC, DSP Surround modes*2 [DTS-HD+ PLIIz HEIGHT] DTS-HD Master Audio 7.1 ch, DTS-HD MASTER or DTS-HD HI RES DTS-HD High Resolution Audio 7.1 ch DTS ES Discrete 6.1 ch (DTS+PLIIx MOVIE), DTS ES DISCRETE, DTS+PLIIx MUSIC DTS, [DTS+PLIIz HEIGHT] DTS ES Matrix 6.1 ch (DTS+PLIIx MOVIE), DTS, DTS ES MATRIX, DTS+PLIIx MUSIC, DSP Surround modes*2 DTS 5.1 ch, (DTS+PLIIx MOVIE), DTS or DTS 96/24, DTS+NEO:6, DTS+PLIIx DTS or DTS 96/24, [DTS+PLIIz HEIGHT] DTS 96/24 5.1 ch MUSIC, DSP Surround modes*2 PCM 7.1 ch PCM PCM, [PCM+PLIIz HEIGHT] PCM 5.1 ch*1 (PCM+PLIIx MOVIE), PCM, PCM+EX, PCM+PLIIx MUSIC, DSP Surround modes*2 Dolby Digital 2 ch, DOLBY PRO LOGIC, DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC, DOLBY PRO LOGIC, DOLBY PLII MOVIE, PCM 2 ch , DOLBY PLIIx GAME, NEO:6 CINEMA, NEO:6 MUSIC, DSP DOLBY PLII MUSIC, DOLBY PLII GAME, NEO:6 CINEMA, NEO:6 MUSIC, DSP Analog 2 ch Surround modes*2 Surround modes*2,
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 22 ENGLISh • When theSPEAKERbuttonissettooff,onlyFront
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 24 ENGLISh • Weak stationsareskippedduringautotuning. • If thestationfoundisnotdesiredone,simplyrepeat • The tunerwillnowsearchuntilastationofsufficient • When FMstereobroadcastsarepoorbecauseofweak • Each timethisbuttonispressed,thebandchangesas 2. 1. this operation. frequency. strength hasbeenfound.Thedisplayshowsthetuned monaural sound. the noise,thenFMbroadcastsarereproducedin broadcast signals,selecttheFMmonomodetoreduce follows ; Auto tuning → (" "lightsup) LISTENING TO RADIOBROADCASTS Select thedesiredband. FM STEREO→ more than0.5second. Press theTUNINGUP(+)/DOWN(-)buttonsfor TUNE BAND US AU Band Frequency MMH FM TO 8 FM MONO→ 7 URR .50 AT zP AM -26 01 24 • After selectingthedesiredband,pressTUNINGUP(+) • Manual tuningisusefulwhenyoualreadyknowthe • To memorizeAMstationsorweakstations,preform • FM stationsofweakstrengthcannotbememorized. ■Notes: • Up to30FMstationscanbestored. • To stopautopresetting,pressthisbuttonagain. • Then "AUTOMEM"flickersandthisreceiverstartsauto • While listeningtoFMradiobroadcasts,pressandhold • Auto presettingfunctionautomaticallysearchesforFM been reached. / DOWN(-)buttonsrepeatedlyuntiltherightfrequencyhas frequency ofthedesiredstation. operation. "Manual presetting"procedurewithusingtuning" presetting. seconds. down theENTER(/MEMORY)buttonformorethan2 stations onlyandstoretheminthememory. manual tuning Auto presetting TUNE ENTER/MEMO RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 25
manual presetting Tuning to preset stations
• You can store up to 30 preferred stations in the memory. • After selecting the tuner as an input source, select the desired preset number.
1. Tune in the desired station with auto or manual tuning. PRESET
Press the ENTER(/MEMORY) button.
2. ENGLISh
ENTER/MEMO
• When using the NUMERIC buttons on the remote control. Examples: For “3” : AT AUTO SURR 26 For “15” : FM8 9.10 MH zP0 For “30” :
• The preset number flickers.
3. Select the desired preset number (1~30) and press the ENTER(/MEMORY) button.
TUNE
ENTER/MEMO
PRESET
• When using the NUMERIC buttons on the remote control.
Examples : For “3” :
For “15” :
For “30” :
• The station has now been stored in the memory. • When specifying a two digit number with using the NUMERIC buttons, the station is stored automatically without pressing the ENTER(/MEMORY) button. • A stored frequency is erased from the memory by storing another frequency in its place.
4. Repeat the above steps1 to 3 to memorize other stations.
■mEmORY BACkUP FUNCTION The following items, set before the receiver is turned off, are memorized. • INPUT SELECTOR settings • Surround mode settings • Preset stations,etc.
25 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 26 ENGLISh • RDS searchesforthepresetstationsonly.Ifnohavebeenstoredinmemory,orifprogramtypecouldnotbe • RDS isonlypossibleintheFMband. • In theothercountries,RDStunerfunctioncannotbeavailable. ■Notes : Program Servicename(PS),AlistofTypes(PTY),RadioText(RT). capable oftranslatingthesesignalsandputtingtheinformationondisplay.Thesecodescontainfollowinginformation. RDS(Radio DataSystem)isamethodforsendinginformationsignalstogetherwiththetransmittersignals.Yourtuner 2. 1. RDS Tuner (Regional Optionfor somecountries inEurope, etc.) Searching forstationsbyprogramtype Therefore, presettheradiostationsbeforesearchingforRDSstations. found amongthepresetstations,“NOPTY”isdisplayed. • If "SEARCH"disappears,pressthe SEARCH MODE • Each timethesebuttonsarepressed,oneofdifferent • “PTY SEARCH”isdisplayedforseveralseconds. • You cansearchforstationsbyprogramtype. LISTENING TO RDSBROADCASTS(FM ONLY) button again. types ofprogramsisselected. Nation M,Oldies,FolkDocument) Religion, PhoneIn,Travel,Leisure,Jazz,Country, Classics, OtherM,Weather,Finance,Children,Social, Science, Varied,PopM,RockEasyLight (News, Affairs,Info,Sport,Educate,Drama,Culture, In theFMmode,pressSEARCHMODE button. program type. While displaying"SEARCH",selectthedesired PT MMH FM Y: 8 9.10 New s AT zP 26 26 3. 4. • If you don’t press the ENTER button, searching resumes. • If no station is found, “NO PTY” is displayed. • When astationisfound,thesearchstopsand • The tunerstartssearchingthroughthepresetstationfor station playsforfiveseconds. a match. the ENTER button. While displaying the selected program type, press the ENTER button within the five seconds. If you want to keep listening to the station, press RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 27 Displaying RDSinformation • If thesignalsaretooweakornoRDSserviceis * Radio Text(RT)-Messagessentbytheradiostation.For * Program Type(PTY)-Thisindicatesthekindofprogram * Program ServiceName(PS)-Thenameoftheradio • Each timethisbuttonispressed,thedisplaymode In theFMmode, displayed. available, "NONAME",PTY"orTEXT"willbe changes asfollows: →→→ number asRT. example, atalkradiostationmayprovidephone currently beingbroadcast. station. Surround mode Text (RT) Radio ←← Signal input Program (PTY) Type Service name Program (PS) 27
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 28
LISTENING TO INTERNET RADIO BROADCASTS, MUSIC FILES
• You can listen to Internet radio broadcasts or music files stored on a USB memory device or a computer (media server).
■Internet Radio ■USB memory Devices • Internet radio refers to radio broadcasts distributed over • A USB memory device can be connected to the USB the internet. Internet radio stations from around the world connetor either on the front panel or on the rear panel to can be tuned in by accessing Internet radio websites like play music files stored on it. Pandora, Reciva, Shoutcast and Aupeo. • Only USB memory devices conforming to mass storage ENGLISh class and MTP(Media Transfer Protocol) standards can be ◆Pandora (http://www.pandora.com) played on this unit. Pandora is a paid music broadcast service provided by • This unit supports FAT16 or FAT32 file format system for Pandora. Before using Pandora, you will need to visit the USB memory device. Pandora website on your computer to create an account and to register as a member. ■media Player ◆Reciva (http://www.reciva.com) • This function lets you play music files stored on a Reciva is a free internet radio broadcast service provided by computer (media server) connected to this unit via a Reciva. Before using Reciva, you will need to visit the wireless network. You can share the music files easily by Reciva website on your computer to create an account and using Windows Media Player ver 11. to register as a member. ■Note : ◆Shoutcast (http://www.shoutcast.com) • You should connect the computer (media server) to the Shoutcast is a free internet radio broadcast service same local network with this unit. provided by Shoutcast. You can use Shoutcast without registration. ■Compatible Audio File Formats • For Internet radio, USB memory device and media server ◆Aupeo (http://www.aupeo.com) playback, this unit supports the following music file Aupeo is a free internet radio broadcast service provided by formats. Aupeo. Before using Aupeo, you will need to visit the Aupeo website on your computer to create an account and to Sampling File format Bit rate Extension register as a member. frequency
■Note : MP3 32/44.1/48 kHz 32 ~ 320 .mp3, .MP3 • There are many Internet radio stations on the Internet, and (MPEG-1 kbps the quality of the programs they broadcast as well as the Audio bit rate of the tracks varies widely. Generally, the higher Layer-3) the bit rate, the higher the sound quality, but depending on the communication lines and server traffic, the music or WMA 32/44.1/48 kHz 32 ~ 320 .wma, .WMA audio signals being streamed may be interrupted. (Windows kbps Inversely, lower bit rates mean a lower sound quality but Media less tendency for the sound to be interrupted. Audio)
• Variable bit-rate files are supported. • MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. • Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
28 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 29
Basic Operation 4. Select the desired item, then press the ENTER button. 1. Make the necessary preparations. PRESET ENTER/MEMO
① Check the network environment, then turn on this unit. (See “CONNECTING TO NETWORK” on page 10.) ② If settings are required, register your accounts and make the network settings, etc. (See “When selecting ENGLISh “settings”” on page 35.) ③ If the computer is used as a media server, prepare the or computer. Install Windows Media Player ver 11. (See “Configuring the Windows Media Player ver 11.” on page 34.)
2. Select the “NET/USB” as an input source.
AUDIO • When selecting “now playing” , see page 31. • When selecting “music services” , see page 31. • When selecting “internet radio” , see page 33. • When selecting “music library” , see page 33. • When selecting “dmc” , see page 34. • When selecting “favorites” , see page 35. • When selecting “settings” , see page 35. AT • For details on setup menu flow, see page 30. AUTO SURR NT/USBE 5. Repeat the above step 4 until the desired station, music file or setting option, etc. is selected.
AT Shout cas t • Then the selected is played or set to. 1Ra dio Swing • When the AUDIO ASSIGN(/RETURN) button is pressed on a sub-menu, it will return to the previous status. • The “NET/USB” is selected and then the status memorized • When the SETUP(/MAIN MENU) button is pressed on a last will be resumed. sub-menu, it will return to the main menu. • When the power is turned on and then “NET/USB” is selected, the main menu is displayed (see the step 3 ■Playback operations below). • During playback of internet radio broadcasts or music files, you can play them in different playback modes. 3. To select an item on the main menu, press the SETUP(/MAIN MENU) button. ◆To stop playback During playback, press the Stop(■) button.
SETUP
MAIN MENU
Main menu • Then the playback will be stopped. AT Main Menu • To start playback, press the PLAY(▶) button. 1no wpl aying
• Then the main menu is displayed.
29 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 30
◆To pause playback ◆To play repeatedly During playback, press the PAUSE( ) button. During playback of the desired music file, press the REPEAT( ) button. ENGLISh • Then “ ” lights up and the music files on the folder are • Then the playback will be stopped at the point where this played repeatedly. button is pressed. • To cancel the repeat playback, press this button again. • To resume playback from this point, press the PLAY(▶) button. ◆To play in random order During playback of music files, press the SHUFFLE( ) ◆To skip ahead or back button. During playback of music file.
To skip back To skip ahead
• Then “ ” lights up and the music files on the folder are played in random order. • To cancel the random playback, press this button again. • Each time the button is pressed, a music file is skipped. ■Note : • The skip mode, repeat mode and random mode can be used when playing only music files stored on a USB memory device. • For your reference, setup menu flow is as follows :
Setup menu flow Main Menu 1 now playing 2 music services 1 Pandora 3 internet radio 1 Reciva Countries 2 Shoutcast 4 music library 1 Local Drive My Radios My Aupeo! 5 dmc 1
6 favorites 7 settings 1 Accounts 1 Reciva Settings 1 Register key 2 Playback 1 Repeat 2 Shuffle 3 Network 1 Wireless 1 WPS 2 AP List 2 Status 1 SSID 2 IP 3 GW 4 DNS 4 General 1 Factory Settings 2 About 1 Type of this unit 2 Version 3 WPS PIN 4 MAC
30 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 31
When selecting “now playing” ENTER/MEMO • You can display the information on the Internet radio broadcast or music file being played. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired display mode.
Example: When playing an Internet radio broadcast • Then a music broadcast is played. AT ENGLISh • When you select the Padora for the first time or the “Sign Shout cas t Out” on the Pandora menu, register your account first. (For 1Ra dio Swing details, see “Registering your account” on page 32.)
PRESET 2. While playing a music broadcast, press the AUDIO ASSIGN(/RETURN) button.
AUDIO ASSIGN
RETURN • Each time the button is pressed, the mode changes as follows → station or device name ↔ song title ← →Add to favorites* ↔artist name ↔album name ← * : Available only while playing music files or Internet radio broadcasts provided by Shoutcast. ■Notes : • Characers except “A~Z”, “a~z”, “0~9”, “-” may not be Pandora broadcast list displayed. • If the information on station name, song title or artist AT name, etc. is not available, it will not be displayed Pando r a Ra di o correctly. 1CreateaS tit • Then the Pandora broadcast list is displayed. ■When selecting the “add to favorites” • Each time this button is pressed, the previous status is ① Press the ENTER button. returned to.
ENTER/MEMO 3. Select the desired music broadcast, then press the ENTER button.
PRESET ENTER/MEMO
• Then “OK” is displayed. or ② Press the ENTER button to confirm your selection. • Then the station or music file is registered in the favorite list. (For details on the favorite operation, see “When selecting “favorites”” on page 35.)
When selecting “music services”
• To listen to music broadcasts by accessing Pandora website on this unit, first you should enter the same email address and password that you registered on its website (http://www.padora.com) on the computer. (For details,
see the Pandora homepage.) AT Pando r a 1. Press the ENTER button. 1M&MRad i o • Each time the CURSOR UP(▲) or DOWN(▼) button is
AT pressed, the music broadcasts are selected. Mu sic Ser v i ces • When you want to search for a music broadcast by name 1Pandora (or a keyword from within its title), select “Create Station”.
31 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 32
◆When selecting “Create Station” ① While playing a song to be rated, press the • Then the name entry menu is displayed. RATING( ) button.
AT Type ‘ s o ng’ o r
① Press the CURSOR UP(▲)/DOWN(▼) buttons to enter the desired character. • You can enter the desired among A~Z, a~z, 0~9, • Then “Thumbs up/down” is displayed for 5 seconds.
ENGLISh symbols (@, ., ----, blank). ② Press the CURSOR RIGHT(▶) button to move to next ② While displaying “Thumbs up/down”, press the digit. CURSOR UP(▲)/ DOWN(▼) buttons to rate • To delete a character, press the CURSOR LEFT(◀) a song up or down. button. Each time this button is pressed, characters To rate up To rate up are deleted one by one in the opposite sequence. ③ Repeat the above steps ① and ② to complete the PRESET entry. ④ Press the ENTER button to confirm your entry. • Then the “Search Results” is displayed. • Depending on the name you entered, it may take times to search for music broadcasts. ⑤ Press the CURSOR UP(▲)/DOWN(▼) buttons to select To rate down the desired music broadcast, then press the ENTER To rate down button. • Then the song is rated as desired.
• Then the selected broadcast is played. ■Registering your account • While playing a music broadcast, each time the CURSOR • When you select the Pandora for the first time or the “Sign Out” on the Pandora menu, you should register your UP(▲) or DOWN(▼) button is pressed, the display mode account. changes as follows : AT →station name ↔song title↔album name ↔artist name ← Doyo u h ave a P 1Back ① Press the CURSOR UP(▲)/ DOWN(▼) buttons to ■Adding or deleting a music broadcast select the desired item, then press the ENTER button. • Each time the CURSOR UP(▲) or DOWN(▼) button ① While playing the desired music broadcast, press the is pressed, the item is changed as follows. ENTER button. →Back : Select this to return to the previous status AT ↕ Pando r a Menu No : Select this when you don’t have a Pandora account 1Bookmarki th ↕ Yes : Select this when you have it. • Then the Pandora menu is displayed. → When selecting “Yes” ② Press the CURSOR UP(▲)/DOWN(▼) buttons to select ◆ the desired item, then press the ENTER button. Then email entry menu is displayed. AT En ter yo ur emai • To add the music broadcast to the Pandora broadcast list, select “Bookmark this song” or “Bookmark this artist”. Press the CURSOR UP( )/DOWN( ) buttons to enter • To rate a song up or down, select “Why this song?” or “I ② ▲ ▼ the desired character. am tired of this song”. • You can enter the desired among A~Z, a~z, 0~9, • To rename the station, select “Rename current station”. symbols (@, ., ----, blank). • To delete the music broadcast in the Padora broadcast Press the CURSOR RIGHT( ) button to move to next list, select “Delete current station”. ③ ▶ digit. • To sign out from the Pandora website, select “Sign Out”. • To delete a character, press the CURSOR LEFT(◀) button. Each time this button is pressed, characters ③ Perform the setting operations required. are deleted one by one in the opposite suquence. ④ Repeat the above steps ② and ③ to complete the • When entering a new name, perform the steps ① ~ ④ in entry. “When selecting “Create Station”” procedure above. ⑤ Press the ENTER button to confirm your entry. • Then password entry menu is displayed. ■Rating a song up or down Repeat the above steps ~ to enter the password. • If you rate a song up or down, Pandora will play more ⑥ ② ⑤ music like this song or will not play. • Then it will automatically access the Pandora website and play a music broadcast. • If the email address and password are not input correctly, this unit cannot access its website. 32 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 33
When selecting “internet radio” • While playing a broadcast, each time the CURSOR UP(▲) or DOWN(▼) button is pressed, the display mode • You can listen to Internet radio broadcasts provided by changes as follows. Reciva, Shoutcast or Aupeo. → station name ↔ song title ↔ album name ← 1 2 • To listen to Internet radio broadcasts provided by Reciva → Add to favorites* /Reply* ↔ artist name ← 1 or Aupeo on this unit, first you should access its website * : Available only while playing a broadcast provided by (http://www.reciva.com or http://www. aupeo.com) on the Shoutcast. computer and program the desired Internet radio • For details on display mode, see “When selecting “now broadcasts respectively by various categories. (“My playing”” on page 31. Stations”, “My Streams”, “My Podcasts”, etc.). (For details, *2 : Available only while playing a broadcast provided by ENGLISh see the Reciva or the Aupeo homepage.) Reciva or Aupeo. • When “Reply” is selected, perform the setting operations 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to required. select “Reciva” or “Shoutcast”, then press the ENTER button. When selecting “music library” AT Inter net Radio 1Reciva • You can listen to music files stored on a USB memory device. PRESET ENTER/MEMO 1. Connect the USB memory device to the USB connector either on the front panel or on the rear panel.
AT Mu sic Library or 1LocalDrive
2. Press the ENTER button twice to select “USB”.
ENTER/MEMO
Example: When selecting Reciva
AT Re c i v a AT /mnt / ubs 1Countries 1Melon 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired category (or item), then press 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to the ENTER button. select the desired folder (or music files), then press the ENTER button.
ENTER/MEMO 3. Repeat the above step 2 until the desired PRESET broadcast is listened to.
Example: When playing a broadcast provided by Reciva
AT or Re c i v a 1RadioJazz • To listen to Internet radio broadcast provided by Aupeo, select it on “Reciva” menu. • When “Search” is selected on “Reciva” menu, see “When selecting “Create Station”” on page 32 for details on the setting operation.
33 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 34
4. Repeat the above step 3 until the desired music 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to file is selected. select the desired category, then press the ENTER button. Example: When playing a music file
AT Loca l Drive 4. Repeat the above step 3 until the desired music 1USB file is selected. • While playing a music file, each time the CURSOR UP(▲) Example: When playing a music file ENGLISh or DOWN(▼) button is pressed, the display mode AT changes as follows. DLNA Serv e rs → device name ↔ song title ← 1Sherwood Pr o → Add to favorites ↔ artist name ↔ album name ← • For details on display mode, see “When selecting “now • While playing a music file, each time the CURSOR UP(▲) playing”” on page 31. or DOWN(▼) button is pressed, the display mode changes as follows. → server name ↔ song title ← When selecting “dmc” → Add to favorites ↔ artist name ↔ album name ← • For details on display mode, see “When selecting “now • You can listen to music files stored on a computer (media playing”” on page 31. server) connected to this unit via a wireless network. ■Note : • To play music files stored on your computer, you should configure the Windows Media Player ver 11. first. (For ■Configuring the Windows media Player ver. 11. details, see “Configuring the Windows Media Player ver. 11” below.) 1. Run the Windows Media Player ver. 11 on your 1. Start your computer (media server). computer.
AT DLNA Serv e rs 2. Select “Library” tab in the menu bar, and then 1RescanDevi select “Media Sharing”.
2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select your computer as a media server, then 3. In the “Media Sharing” dialog box, select the press the ENTER button. “Share my media” check box, and then click “OK”.
PRESET ENTER/MEMO
4. In the list of devices, select this unit, and then click “Allow”.
or 5. Click “OK” to close the dialog box.
• Then the Windows Media Player ver. 11 configuration has been completed. • You can play the music files in your Windows Media Player ver. 11 library through this unit.
■Notes : • The Windows Media Player ver. 11 can be downloaded for free from the Microsoft Web site. AT She r wood P r oudm • If the fire wall resctricts access, the Windows Media Player 1Music ver. 11 cannot be configured. • When your computer is not displayed in the list, select “
34 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 35
When selecting “favorites” When selecting “settings”
• You can listen to Internet radio stations (only provided by • When listening to Internet radio broadcasts or music files Shoutcast) or music files registered in the “favorites” list or for the first time, first make settings for accounts, playback, delete them. network, etc. for optimum performance. ■Note : • When the USB memory device is disconnected or your Select the desired item, then press the ENTER computer (media server) is turned off, the music files 1. button.
stored on them cannot be played. ENGLISh
AT 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to Se t t i ngs select the desired station or file, then press the 1Accounts
ENTER button. PRESET ENTER/MEMO
AT Favor i t es 1nA imal Ds on t PRESET ENTER/MEMO
or
or
• Each time the CURSOR UP(▲) or DOWN(▼) button is pressed, the setting mode changes as follows. → Accounts ↔ Playback ↔ Network ↔ General ←
■When selecting “Accounts” AT • In order to access the additional features provided by Play or D ete?el Reciva, you will need to visit the Reciva website on your 1LP AY computer to create an account and to register your radio. ■Note : 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to • You cannot check the access code if you have not listened to Internet radio broadcasts provided by Reciva yet select “PLAY” or “DELETE”, then press the through this receiver. ENTER button. AT Account Se t t ing Example: When playing a music file 1Reciv a Se t t i
AT Favor i t es 1SUB 2. Press the ENTER button twice to check the • When “PLAY” is selected, the selected station or music file access code. will be played. • When “DELETE” is selected, the selected station or music file will be deleted in the “favorites” list. AT • While playing a station or music file, each time the 3023d3e CURSOR UP(▲) or DOWN(▼) button is pressed, the 1OK display mode changes as follows. • Then, write down the access code to register your radio. → station/device name ↔ song title ← → artist name ↔ album name ←
35 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 36
3. Press the ENTER button. 5. Press the CURSOR UP(▲)/DOWN(▼) buttons to select “OK” or “CANCEL”, then press the ENTER button. • Then the previous status is returned to.
4. Visit the Reciva website at www.reciva.com on • When the “OK” is selected, the playback settings are your computer. stored and the previous status is returned to. • When the “CANCEL” is selected, the playback settings are
ENGLISh not stored and the previous status is returned to.
5. Create an account and register your radio. ■When selecting “Network” • To listen to Internet radio stations, music broadcasts or • When you have registered your radio, you can take music files stored on your computer via a wireless advantage of various additional features and services that network, you should configure network settings first. it provides. AT ■When selecting “Playback” Ne twor ktingSet • You can play music files stored on a USB memory device 1Wireless in the desired playback mode. During playback of music files, select the desired playback mode. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to AT select “Wireless” or “Status”, then press the Playback ENTER button. 1Repea t Example: When selecting “Wireless” 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select “Repeat” or “Shuffle”, then press the AT ENTER button. Wi rele ssSet t in 1WPS
• When “Wireless” is selected, you can configure network 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to settings simply and easily. select “off” or “on”, then press the ENTER button. • When “Status” is selected, you can check the information on network settings.
• Then the selected playback mode is set as desired and the previous status is returned to. * off : To deactivate the selected playback mode ◆When selecting “Wireless” * on : To activate it. • For details on playback modes, see “To play repeatedly” 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to and “To play in random order” on page 30. select “WPS” or “AP List”, then press the ENTER button. 4. Press the AUDIO ASSIGN(/RETURN) button to return to previous status. • If your wireless router with access point supports WPS function, you can select “WPS”. AUDIO ASSIGN • If not, select “AP List”.
* In case of selecting “WPS” RETURN AT Press WPttoS bu /
• Press the WPS button on your wireless router. Then the network settings are automatically configured and the “Status” menu will be displayed to check the information on network settings. AT Save Se t t i ngs? 1OK
36 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 37
* In case of selecting “AP List” ■When selecting “General” • This unit searches for all available wireless routers. AT AT Gener al Se ttin g AP List 1 Factor y Set t 1link sy s / NONE
• Depending on whether security code is required or not 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to while configuring network settings, “WEP”(“WPA”, select “Factory Settings” or “About”, then press “WPA2”, etc.) or “NONE” is displayed beside the name. the ENTER button. ① Press the CURSOR UP(▲)/DOWN(▼) buttons to select ENGLISh the desired of all available wireless routers, then press the ENTER button. Example : When selecting “Factory Settings”
• In case that security code is not required, the network AT settings are automatically configured and the “Status” Wa r n i ng : A lls e menu will be displayed. 1 OK ② In case that security code is required, perform the steps ②~⑤ in “Registering your account” procedure on page • When “Factory Settings” is selected, you can reset the 32 to enter the sucurity code. “Playback” settings, “Network” settings and stations or • If the security code is correct, the network settings are music files registered in the “favorites” list to the factory automatically configured and the “Status” menu will be default. displayed. • When “About” is selected, you can check the general • It it is not correct, press the ENTER button and enter it information such as type of this unit, software version, again. WPS PIN and MAC address.
◆When selecting “Status” ◆When selecting “Factory Settings” 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to check the desired information. 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to select “OK” or “CANCEL”, then press the ENTER button. AT Status 1SSID: l i nksy s • When “OK” is selected, they are reset to the factory default. • Each time the CURSOR UP(▲) or DOWN(▼) button is • When “CANCEL” is selected, then the previous status is pressed, the information changes as follows. returned to without resetting. → SSID ↔ IP address ← → DNS server ↔ GW(Gateway) ← ◆When selecting “About”
AT About 1Interne tAdu
3. Press the CURSOR UP(▲)/DOWN(▼) buttons to check the desired information.
• Each time the CURSOR UP(▲) or DOWN(▼) button is pressed, the information changes as follows. → Type of this unit ↔ Software Version ← → MAC address ↔ WPS PIN ←
37 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 38
RECORDING
• The digital signals from the coaxial, optical digital input or HDMI IN can be heard but cannot be recorded. • When recording the analog signals from CD, AUX, F.AUX, VIDEO 2~4, be sure to select the analog input. (For details, refer to "When an input source other than TV, NET/USB, tuner is selected" on page 15.) • The volume and tone (bass, treble) settings have no effect on the recording signals.
ENGLISh Dubbing from video components onto VIDEO 1
1. Select the desired of VIDEO 2 and VIDEO 4 as a recording source except VIDEO 1.
VIDEO
■Recording audio signals(, not video signals) • When an audio recording equipment is connected to the AUDIO IN/OUT jacks of “VIDEO 1”, select the desired of CD, AUX, F.AUX, TUNER, VIDEO 2~4.
2. Start recording on the VIDEO 1.
3. Start play on the desired input.
• The audio and video signals from the desired input will be dubbed onto the VIDEO 1 and you can enjoy them on the TV set and from the speakers.
38 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 39
OTHER FUNCTIONS
Operating the sleep timer
• The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time. ENGLISh
• Each time this button is pressed, the sleep time changes as follows: → 10 → 20 → 30 → --- → 90 → OFF Unit : minutes
• While operating the sleep timer, " " lights up. • When the sleep time is selected, the fluorescent display is dimly lit.
Adjusting the brightness of the fluorescent display
• Each time this button is pressed, the brightness of the fluorescent display changes as follows: → ON → dimmer → OFF
• In the display OFF mode, pressing some buttons cancel the display OFF mode to display the operation status.
Displaying the operation status
During playback, • Each time this button is pressed, the display mode changes as follows:
Signal OFF input ↔ (Normal display)
• When the RDS tuner function is available in your country, for details on the FM mode information, see “Displaying RDS information” on page 27.
Playing ROOm 2 source
• Each time this button is pressed, the ROOM 2 MODE • The ROOM 2 function alllows enjoying one source in the changes as follows: main room and playing another in a different room at the ON : To turn on the ROOM 2 function.(“R2” lights up.) same time. ↕ OFF : To turn it off. (“R2” goes off.) For details on ROOM 2 playback, refer to “SETTING THE MULTI ROOM SETUP” on page 55.
■Notes : • Even when this receiver enters the standby mode, in such a case that “R2” lights up still, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently. • When you do not use the ROOM 2 function, turn off the ROOM 2 function to save electricity.
39 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 40 ENGLISh • Confirm thatallthecomponentsareturnedoff. • Confirm thatallthecomponentsareturnedonandinputsofthisunit andTVareswitchedautomatically. 3. 2. 1. • Confirm thatitspictureisdisplayedandthesoundheardfromspeakersproperly. • Set theHDMICONTROLandPOWERCONROLtoONenablecontrolofthisreceiver. • Check thattheHDMIcontrolofTVandHDMI-connectableplayerareenabled. • Check thatthisreceiver,TVandplayer,etcareconnectedbyHDMIcabels. • Some HDMIcontrolfunctionsmaynotworkwithcertaincomponentsandTVthatarecompatiblethem. ■Note : connected componentbyperformingthefollowingoperations. To usetheHDMIcontrolfunctionsproperly,itisrecommendtoconfirmusablewitheach 3. 2. 1. Confirming thehDmIcontrolfunctions Confirming thebasichDmIoperations Before operation (For details,referto“SETTINGTHEHDMISETUP”onpage58.) (For detailsonthesetupsofTVandplayer,refertotheiroperatinginstructions.) CONFIRMING THEHDMIFUNCTION Turn the power on for all the components connected by HDMI cables. Turn the power on for all the components connected by HDMI cables. With all the components off, start playback on a player (connected by HDMI cable). Turn the TV off to enter the standby mode. Switch this unit input to the HDMI input source. Switch the TV input to the HDMI input connected to this receiver. 40 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 41 System Setup
• The setupmenuisdisplayedonthefluorescentdisplayandallowsyoutoperformprocedureseasily.Inmost
■Note : • Only whenaninputsourceotherthanNET/USBisselected,youcanperformthesystemsetupprocedures. ■Navigating throughthesetupmenu • The explanationshereassumeyouareusingthebuttonsonremotecontrolwhenperformingsetupmenuoperation. 2. 1. • Toturnthemenuoff,pressthisbuttonagain. • Thesetupmenuwillbeshown.
The setupmenuconsistsof7mainmenus;system,input,speaker/roomEQ,CHlevel,multiroom,parameterandHDMI. These menusarethendividedupintovarioussub-menus.
The buttonsonthefrontpanelcorrespondtothoseremotecontrolasshownbelow.
situations, youwillonlyneedtosetthisonceduringtheinstallationandlayoutofyourhometheater,itrarelyneedsbe changed later.
However, youcanusethebuttonsonfrontpanelaswell. Turn thesetupmenuon. UP(▲)/ DOWN(▼)buttons. Select thedesiredmenuusingCURSOR AM MA SS YET IN T MS EM ENU MAIN MENU AT SETUP UP 26 ENTER /MEMO 41 • When selecting"EXIT",thesetupmenuwillbeturnedoff. • When selecting"HDMISETUP",see"SETTINGTHE • When selecting"PARAMTERSETUP",see"SETTING • When selecting"MULTIROOMSET",see"SETTING • When selecting"CHLVLSETUP",see"SETTINGTHE • When selecting"SPK/EQSETUP",see"SETTINGTHE • When selecting"INPUTSETUP",see"SETTINGTHE • When selecting"SYSTEMSETUP",see"SETTINGTHE 3. HDMI SETUP"onpage58. THE PARAMETERSETUP"onpage56. THE MULTIROOMSETUP"onpage55. CH LEVELSETUP"onpage53. SPEAKER/ROOM EQSETUP"onpage47. INPUT SETUP"onpage45. SYSTEM SETUP"onpage43. Confirm yourselection. TUNE PRESET
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 42 ENGLISh • The setupmenuflowisasfollows: ■Setup menuflow • When theAUDIOASSIGN(/RETURN) buttonispressedonasub-menu,itwillreturntothepreviousmenu, too. ■Note : • When "RETURN"isselectedonasub-menu, itwillreturntothepreviousmenu. SPK /EQSETUP INPUT SETUP SYSTEM SETUP EXIT HDMI SETUP PARAMTER SETUP MULTI ROOM SET CH LVL SETUP will function. During settupmenuoperation,only the(POWERON/)STANDBYbuttonandbuttonsrequiredfor systemsetup RETURN F.AUX CONFIG AUX CONFIG CD CONFIG VIDEO 4CONFIG VIDEO 3CONFIG V2/iPOD CONFIG VIDEO 1CONFIG RETURN POWER : OFF/ON CEC : OFF/ON HDMI : AMP / THROUGH RETURN DTS : 0 dB /-10 ~0 DD : 0dB /-10 ~0 SUBW : 0dB/-15 ~+15 SURR L: 0dB/-15 ~+15 SBACK L: 0dB/-15 ~+15 SBACK R: 0dB/-15 ~+15 SURR R: 0dB/-15 ~+15 RIGHT : 0dB/-15 ~+15 CENTER : 0dB/-15 ~+15 :LEFT 0dB/-15 ~+15 MODE : CAL /REF12 RETURN SPK DISTANCE CROSSOVER SPK CONFIG ROOM EQ AUTO SETUP RETURN ROOM 2: OFF/ON RETURN TONE : OFF/ON SW MODE: NORM/SW+ AMP : SURR.BACK /FRONT HEIGHT/ROOM 2/BI AMP H.GAIN : LOW /MIDHIGH DRC THD DRC DD DIMENSION : 0/-3~+3 C.WIDTH : 3/0~7 PANORAMA : OFF/ON RETURN TREBLE : 0dB/-10 ~+10 BASS : 0dB/-10 ~+10 UNIT : METERS RETURN Fc : 30 / 5080100 /150 /200 RETURN SUB-W : YES /NO SURR B: L2/L1S2S1NO SURR : LARGE/SMALLNO CENTER : LARGE/SMALLNO FRONT : LARGE/SMALL RETURN MODE : OFF/ON RETURN DRC : AUTO /OFFMIDMAX RETURN DRC : OFF/MIDMAX RETURN VOL : 30/MIN(0)~MAX(80) IN : MAIN/ TUNER /CD AUX /F.AUX / VIDEO 1/ V2/iPOD / VIDEO 3/ VIDEO 4 RETURN SYNC : 0/~200 AUTO : ON/OFF D.IN* : OPT1/OPT2COX 1/COX 2/- A.MODE : AUTO /HDMIDIGITAL / ANALOG RETURN SUBW : 3.0m/0.1~9.0 SURR L: 3.0m/0.1~9.0 SBACK L: 3.0m/0.1~9.0 SBACK R: 3.0m/0.1~9.0 SURR R: 3.0m/0.1~9.0 RIGHT : 3.0m/0.1~9.0 CENTER : 3.0m/0.1~9.0 :LEFT 3.0m/0.1~9.0 42 / FEET * :DefaultsettingforAUDIOASSIGN varies dependingontheinputsource. RETURN SUBW : 10.0 ft /0.5~30.0 SURR L: 10.0 ft /0.5~30.0 SBACK L: 10.0 ft /0.5~30.0 SBACK R: 10.0 ft /0.5~30.0 SURR R: 10.0 ft /0.5~30.0 RIGHT : 10.0 ft /0.5~30.0 CENTER : 10.0 ft /0.5~30.0 :LEFT 10.0 ft /0.5~30.0 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 43 SW ＋: When thelowfrequency signalsofchannelssetto"LARGE"arereproducedsimultaneously fromthosechannelsand NORM :Whenthelowfrequencysignalsofchannelssetto"LARGE" arereproducedfromthosechannelsonly. → • "SW ＋"modeiseffectiveonlywhen“FRONT”and"CENTER"aresetto "LARGE" and"SUB-W"(Subwoofer)issetto"YES" → • The SURROUNDBACKchannels’poweramplifiercandrivesurroundbackspeakers,frontheightROOM2 1. on theSPEAKER/ROOMEQSETUPmenu.(Fordetails,referto"SETTING THESPEAKER/ROOMEQSETUP"onpage47.) 2 SPEAKERTERMINALS”onpage10.) correctly. (Fordetails,referto“CONNECTINGSPEAKERS”onpage8andROOM2OUTJACKSOR speakers orbi-ampcapablespeakers.Dependingonhowtousethespeakers,youshouldassignpoweramplifier When selectingtheSUBWOOFERmODE When selectingtheAmPASSIGN BI AMP:Todrivethebi-ampcapablespeakersforbi-amplification. SURR .BACK(SURROUNDBACK):TodrivethesurroundbackspeakerswhenconnectingSURROUNDBACK SETTING THESYSTEM SETUP ↕ • RETURN:Toreturntothepreviousmenu. • TONE:Toadjustthetone(bassandtreble)asdesired. • SW(SUBWOOFER) MODE:Toselectthedesiredsubwoofermode. • AMPASSIGN:Toassignthepoweramplifiercorrectlydependingonhowtousespeakers. ROOM 2:Todrivethespeakersforplayback. FRONT HEIGHT:TodrivethefrontheightspeakersforDolbyProLogicIIzplayback. to selectthedesireditem. Press theCURSORUP(▲)/DOWN(▼)buttons ↕ ↕ ↕ SYSTEM SETUP of theroom,interferencemayresult inadecreaseoftheactualvolumelowfrequencyrange. In thismode,thelowfrequencyrange expandsmoreuniformlythroughtheroom,butdependingon thesizeandshape the subwooferchannel. channel) andthechannelssetto"SMALL". signals ofLFE(fromthemulti-channelsourcesthatcontains(Low FrequencyEffects)channel,alsocalledthe".1"
In thismode,thelowfrequencysignalsthatarereproducedfrom subwooferchannelisonlythelowfrequency
RETURN TONE : OFF/ON SW MODE: NORM/SW+ AMP : SURR.BACK /FRONT HEIGHT/ROOM 2/BI AMP channels tothem.
TREBLE : 0dB/-10 ~+10 BASS : 0dB/-10 ~+10 43
2.
buttons tosettheselecteditemasdesired Press theCURSORLEFT(◀)/RIGHT(▶)
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 44 ENGLISh ① ■When theTONEissettoONadjusttone(bassandtreble) ② ③ ON :Toadjustthetoneforyourtaste.("DIR"goesoff.) OFF :Tolistentoaprogramsourcewithoutthetoneeffect.("DIR"lightsup.) When selectingtheTONE ↕ Press theENTERbuttontoentertonesettingmode. Press theCURSORUP(▲)/DOWN(▼)buttonstoselectdesiredtone. Press theCURSORLEFT(◀)/RIGHT(▶)buttonstoadjustselectedtoneasdesired. 44 When selectingtheBASS TONE • Extreme settingsathighvolumemaydamageyour • In general,werecommendthebassandtrebletobe • The tonelevelcanbeadjustedwithintherangeof-10~ speakers. adjusted to0dB(flatlevel). +10 dB. BS A00 : S AT dB 30 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 45 1. • RETURN:Toreturntothepreviousmenu. • SYNC (AVSYNC)Toadjustthetimedelaybetweenvideoandaudiosignals. • AUTO(AUTOSURROUND):Toselecttheautosurroundmodeormanualmode. • D.IN(DIGITAL IN):ToassigntheconnectedDIGITALINstodesiredinput. • A.MODE (AUDIOMODE):Toselecttheaudioinputsignaltobeplayed. SETTING THEINPUTSETUP ENTER button. select thedesiredinputsource,thenpress Press theCURSORUP(▲)/DOWN(▼)buttonsto INPUT SETUP VI AM DEO1 .AU O E: DE CFG RETURN F.AUX CONFIG AUX CONFIG CD CONFIG VIDEO 4CONFIG VIDEO 3CONFIG V2/iPOD CONFIG VIDEO 1CONFIG AT TO 30 RETURN AUTO : ON/OFF D.IN : OPT1/OPT2 /COX 1/COX 2/- A.MODE : AUTO /DIGITAL / ANALOG RETURN SYNC : 0/~200 AUTO : ON/OFF D.IN : OPT1/OPT2COX 1/COX 2/ - A.MODE : AUTO /HDMIDIGITAL / ANALOG RETURN SYNC : 0/~200 AUTO : ON/OFF D.IN : OPT1/OPT2COX 1/COX 2/ - A.MODE : AUTO /HDMIDIGITAL / ANALOG RETURN SYNC : 0/~200 AUTO : ON/OFF D.IN : OPT1/OPT2COX 1/COX 2/ - A.MODE : AUTO /HDMIDIGITAL / ANALOG RETURN AUTO : ON/OFF D.IN : OPT1/OPT2 /COX 1/COX 2/- A.MODE : AUTO /DIGITAL / ANALOG RETURN AUTO : ON/OFF D.IN : OPT1/OPT 2 /COX 1/COX 2/- A.MODE : AUTO /DIGITAL / ANALOG RETURN SYNC : 0/~200 AUTO : ON/OFF D.IN : OPT1/OPT2COX 1/COX 2/ - A.MODE : AUTO /DIGITAL / ANALOG 45 3. 2. buttons tosettheselecteditemasdesired. Press theCURSORLEFT(◀)/RIGHT(▶) to selectthedesireditem. Press theCURSORUP(▲)/DOWN(▼)buttons
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 46 ENGLISh • The “SYNC”(AV SYNC) cannot be selected on “CD CONFIG”, “AUX CONFIG” and “F.AUX CONFIG” menus. • The timedelaycanbeadjustedwithintherangeof0~200msec. • When theautosurroundmodeisselected,modesother thantheoptimumsurroundmodecannotbeselected. • There maybeaslighttimedelaybetweenthevideoandaudiosignals incasethatsomevideoplaybackequipmentsmay • Depending onhowtoselectasurroundmode,youcantheautomodeormanualmode. → → • When the AUDIO MODE is set to “DIGITAL”, you should connect the DIGITAL IN and set the DIGITAL IN correctly. If not, the • When the AUDIO MODE is set to “HDMI”, you should connect the HDMI IN corresponding to the video input source • (VIDEO“HDMI” 1,cannot be selected on the “VIDEO 4 CONFIG”, “CD CONFIG”, “AUX CONFIG” and “F.AUX CONFIG” menus. • When the HDMI AUDIO OUT is set to THROUGH, no sound will be heard from the speakers connected to this receiver• Be (except sure to set the AUDIO MODE to the audio input which is connected and assigned to the selected input source.■ • You canselecttheaudioinputsignaltobeplayed. • When theHDMIINconnectorisconnectedtoyourvideocomponentandAUDIOMODEset“AUTO”or“HDMI”, • In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected,■ the digital • You canselectthedesiredofOPT1(optical1),2(optical2),COX1(coaxial2(coaxial2)and-(analog). • You shouldassigntheconnectedDIGITALINtodesiredinputsource. • Even whentheautosurroundmodeisselectedandsametypeof digitalsignalformatisbeinginput,theoptimumsurround ■ ■ When selectingtheAVSYNC When selectingtheAUTOSURROUND When selectingtheDIGITALIN When selectingtheAUDIOmODE ON OFF adjust thetimedelayofaudiosignalstosynchronizesoundwith thepicture. process thevideosignalslaterthanaudioduetosignal processingprocedure,etc..Shouldthishappen,youcan mode mayvarydependingonwhetherthespeakertypeissetto"NO" ornot. “OPTI1”(, “OPTI2”, “COAX1” or “COAX2”) flickers and no sound will be heard. VIDEO 2/iPod, VIDEO 3). If not, the “HDMI1”(, “HDMI2” or “HDMI3”) flickers and no sound will be heard. ROOM 2 speakers). (For details, refer to “When selecting the HDMI AUDIO OUT” on page 58.) DIGITAL INsettingisinvalid. audio signals can be heard from the same DIGITAL IN. (For details,referto"CONNECTINGDIGITALINS"onpage7.) Notes : Notes : DIGITAL : The signal that is input into the OPTICAL or the COAXIAL DIGITAL IN is always played. HDMI : The signals that is input into the HDMI IN is always played. ↕ ANALOG : The signal that is input into the analog AUDIO INs is always played. Note : Notes : AUTO : When there are multiple audio input signals, the audio input signals are detected and the audio input signal to be played (Auto surroundmode) ↕ ↕ ↕ (Manual surroundmode) is selected automatically in the priority order of them : HDMI audio > DIGITAL audio > ANALOG audio : The optimum surround mode will be automatically selected depending on the signal format being input. : You can select the desired of different surround modes selectable for the signal being input with using surround mode with pressing the AUTO/MANUAL button on thethe frontSURROUND panel" MODE on UP/DOWN page 19.) ( > / <) buttons. (For details, refer to "When selecting the manual 46 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 47
SETTING THE SPEAKER / ROOM EQ SETUP
• After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the
speaker settings, too. • When performing the AUTO SETUP procedure, you need not perform the SPEAKER CONFIGURATION, SPEAKER DISTANCE and CH LEVEL SETUP procedures. However, you should set the CROSSOVER manually when speakers are set to “SMALL”.
SPK / EQ SETUP AUTO SETUP ENGLISh ROOM EQ MODE : OFF / ON RETURN SPK CONFIG FRONT : LARGE / SMALL CENTER : LARGE / SMALL / NO SURR : LARGE / SMALL / NO SURR B : L2 / L1 / S2 / S1 / NO SUB-W : YES / NO RETURN CROSSOVER Fc : 30 / 50 / 80 / 100 / 150 / 200 RETURN SPK DISTANCE UNIT : METERS / FEET RETURN LEFT : 3.0 m / 0.1 ~ 9.0 LEFT : 10.0 ft / 0.5 ~ 30.0 CENTER : 3.0 m / 0.1 ~ 9.0 CENTER : 10.0 ft / 0.5 ~ 30.0 RIGHT : 3.0 m / 0.1 ~ 9.0 RIGHT : 10.0 ft / 0.5 ~ 30.0 SURR R : 3.0 m / 0.1 ~ 9.0 SURR R : 10.0 ft / 0.5 ~ 30.0 SBACK R : 3.0 m / 0.1 ~ 9.0 SBACK R : 10.0 ft / 0.5 ~ 30.0 SBACK L : 3.0 m / 0.1 ~ 9.0 SBACK L : 10.0 ft / 0.5 ~ 30.0 SURR L : 3.0 m / 0.1 ~ 9.0 SURR L : 10.0 ft / 0.5 ~ 30.0 SUBW : 3.0 m / 0.1 ~ 9.0 SUBW : 10.0 ft / 0.5 ~ 30.0 RETURN RETURN
• AUTO SETUP : To set the speaker setup and channel level setup automatically. • ROOM EQ : To turn on or off the room EQ. • SPK(SPEAKER) CONFIGURATION : To select the sizes of the speakers that are connected. • CROSSOVER : To select the desired crossover frequency. • SPK(SPEAKER) DISTANCE: To enter the distance between the listening position and each speaker to set the delay time automatically for optimum surround playback. • RETURN : To return to the previous menu.
When selecting the AUTO SETUP
• Auto Setup lets you avoid troublesome listening-based speaker setup and achieve good surround sound. Auto Setup has the feature that provides the optimum listening environment at the listening position in your room. You should connect the supplied microphone to the SETUP MIC jack so that this receiver can analyze the information from a series of test tones emitted from speakers at main listening position and can adjust the configuration, distance, sound level and frequency response of each speaker automatically. • If you want to personalize your speaker setup and channel level setup by making the settings manually, perform the "When selecting the SPEAKER CONFIGURATION" on page 50, "When selecting the CROSSOVER" on page 51, "When selecting the SPEAKER DISTANCE" on page 52 and "SETTING THE CH LEVEL SETUP" on page 53. • After the auto setup has been completed, set the room EQ as desired. (For details, refer to "When selecting the ROOM EQ" on page 49.) ■Preparations ①. Check that the speakers are securely connected to this receiver. • If your subwoofer has adjustable volume and crossover frequency, set the volume halfway and set the crossover frequency to the maximum or the low pass filter off. ②. Connect the supplied microphone to the SETUP MIC jack on the front panel.(For details, refer to "SETUP MIC JACK" on page 12.) ■Notes : • Because the microphone for Auto Setup is designed for use with this receiver, to use the auto setup function, do not use a microphone other than the one supplied with this receiver. • After you have completed the auto setup procedure, disconnect the microphone.
47 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 48 ENGLISh 2. 1. Continued • For best results, ensure the room is as quiet as possible during the auto setup procedure. setup auto the during possible as quiet as is room the ensure results, best • For room. the in children small or infants no there ensure loud, are tones test the • Because ■ channel and setup speaker your personalize or procedure setup auto the retry can you satisfactory, not are results the • If CONFIGURATION (SPEAKER menu menusetup on each page on 50, results SPEAKER the • DISTANCECheck menu on • If there may be a problem with front speakers or microphone connection, error message will be displayed. In this case, turn off (/MAIN SETUP the or button ASSIGN(/RETURN) AUDIO the pess it, performing while procedure setup auto the stop • To are results the completed, been has procedure setup auto of series a if then and successively output are tones test • Loud • Ensure there are no obstacles between the speakers and the microphone. • If possible, use a tripod, etc. to attach the microphone at the same height as your ears would be when you are seated in your If there is too much ambient noise, the results may not be satisfactory. be not may results the noise, ambient much too is there If the power, check the connection and then retry the auto setup procedure. listening position. "Adjusting each channel level with test tone" on page 21 and "Adjusting the current channel level" on page 22.) page 50, "When selecting the CROSSOVER" on page 51, "When selecting the SPEAKER DISTANCE" on page 52, "When to selectingrefer details, the (For SPEAKER manually. CONFIGURATION" settings the on making by setup level page 52 and CH LEVEL SETUP menu for “CAL” mode on page 53). button. MENU) displayed. is menu previous the and memorized Place themicrophoneonaflatlevelsurfaceatlisteningposition. Notes : Press theCURSORUP(▲)/DOWN(▼)buttonstoselect“AUTOSETUP”,thenpressENTERbutton. 48 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 49 2. 1. When selectingtheROOmEQ • To usetheroomEQ,firstyoushouldfinishmeasuringacousticcharacteristicsofyourperformingautosetup. ■Note : • If youusedifferentbrandsorsizesofspeakersforsomechannelshavearoomwithuniqueacousticcharacteristics, • The roomEQisakindofequalizerforyourspeakers.Accordingtotheacousticcharacteristics (For details,referto"WhenselectingtheAUTOSETUP"onpage47.) such aswalls,furniture,andthedimensionsorshapeofroom,werecommendusingroomEQ. measured bytheautosetup,roomEQautomaticallyadjustsfrequencyresponseofyourspeakers. Press theCURSORUP(▲)/DOWN(▼)buttonstoselect“ROOMEQ”,thenpressENTERbutton. Press theCURSORLEFT(◀)/RIGHT(▶)buttonstoselectdesiredroomEQmode. 49 OFF :ToturnofftheroomEQ. ON :Toadjustthefrequencyresponseofallspeakersto ↕ the flattestresponse. RO MOF ME OM O DE: Q F AT 30
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 50 ENGLISh • When the"SURR"(Surround)issetto"SMALL","SURRB"(Surround Back)cannotbesetto"L"(Large). • When the"FRONT"issetto"SMALL",“CENTER”,“SURR”(Surround) and"SURRB"(SurroundBack)(or“F.HEIGHT”(Front • When speakersaresetto"SMALL",youshouldtheircrossoverfrequency correctlyaccordingtotheirfrequency ■Notes : • If youdonotknow,trycomparingthe soundatbothsettings(settingthevolumetoalevellowenough soasnottodamage • Subwoofer :
• Select "LARGE"or"SMALL"notaccording totheactualsizeofspeakerbutaccordingspeaker's capacityforplaying ■About thespeakersize 4. • Surround Backspeakers: • Front, Center,SurroundandBack(orFrontHeight)speakers: • Depending onyourspeakertype,youcanselectoneofthesefollowingtypes. 3. 1. 2. NO : Select thiswhenthesubwooferisnotconnected.Thebassfrequenciesareoutputfromotherspeakers. YES :SelectthistooutputLFEsignalsandbassfrequenciesofchannels setto“SMALL”formthesubwoofer. 2/1 :Selectthedesireddependingonnumberofspeakersconnected toSURROUNDBACKterminals. ( ):SelectableforSurroundBackspeakers. NO : Select thiswhennospeakersareconnected.Whenisselected,soundssenttothewhichnotset SMALL(or S): Select thiswhenconnectingspeakersthatcannotfullyreproducesoundsbelowcrossoverfrequency. LARGE(or L): Select thiswhenconnectingspeakersthatcanfullyreproducesoundsbelowcrossoverfrequency. Height)) cannotbesetto"LARGE"andthe"SUB-W"(Subwoofer) besetto“NO”. characteristics. (Fordetails,referto"WhenselectingtheCROSSOVER" onpage51.) the speakers)todetermineproper setting. low frequency(basssoundbelow frequencysetonthe"CROSSOVER"menu)signals. When selectingtheSPEAkERCONFIGURATION Press theCURSORUP(▲)/DOWN(▼)buttonstoselect"SPKCONFIG",thenpressENTERbutton.
Press theCURSORLEFT(◀)/RIGHT(▶)buttonstosetselectedspeakerasdesired.
▼ ▲ ) buttons to select the desired speaker. speaker. desired the select to buttons ) )/DOWN( UP( CURSOR the Press Repeat theabovesteps2and3untilspeakersareallset tothedesiredmode. "NO". to "LARGE"(whennotusingasubwoofer). When thisisselected,soundsbelowcrossoverfrequencyaresenttothesubwooferorspeakerswhichset 50 SP FLA KC R N : ONT O N F I G AT RGE 30 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 51 1. • Even thoughperformingtheAUTOSETUPprocedure,youshouldsetCROSSOVERmanuallywhenspeakersareto ■Note : • When speakersaresetto"SMALL",besuretheircrossoverfrequencycorrectlyaccording • Refer totheoperatinginstructionsofspeakersbeconnected.Iffrequencyrangeyourspeakeris100Hz~20kHz, • When speakersaresetto"SMALL",lowfrequenciesinthosechannelsthatbelowthecrossoverfrequencyoutput ■About thecrossoverfrequency • You canselectthecrossoverfrequencyamong30,50,80,100,150and200Hz. 2. “SMALL”. characteristics. the crossoverfrequencyshouldbesetto100Hz(orslightlyhigher). from subwooferorfrontspeakerswhicharesetto"LARGE"(whennotusingasubwoofer). When selectingtheCROSSOVER Press theCURSORUP(▲)/DOWN(▼)buttonstoselect"CROSSOVER",thenpressENTERbutton. Press theCURSORLEFT(◀)/RIGHT(▶)buttonstosetcrossoverfrequencyasdesired. 51 CR F80 OSS c: O VR E AT 30
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 52 ENGLISh ■About thespeakerdistance 4. 3. 2. 1. speakers, etc. were at their ideal locations respectively. are automatically adjusted to create an ideal listening environment virtually as if the center, surround and surround back distance between the listening position and each speaker, the delay times of center, surround and surround back speakers, etc. surround back speakers, etc. should be the same distance from the main listening position as the front speakers. By entering the When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center, surround and When selectingtheSPEAkERDISTANCE button. Press theCURSORUP(▲)/DOWN(▼)buttonstoselect“SPKDISTANCE”,thenpressENTER Repeat theabovesteps2and3untildistancesareallsetasdesired. Press theCURSORLEFT(◀)/RIGHT(▶)buttonstosetselecteditemasdesired. Press theCURSORUP(▲)/DOWN(▼)buttonstoselectdesireditem. 52 • You cannot select the speakers set to "NO". ■Note : • You cansetthedistancewithinrangeof0.1~9.0 ■When settingthedistance • Once aunitisselected,thedistancesareautomatically • You canselecteither"METERS"or"FEET". ■When selectingthedesiredunit intervals). meters in0.1meterintervals(or0.5~30.0feet changed intheselectedunit. SP UM KD N T: IT I S T A N EERS AT CE T 30 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 53 1. • After adjustingeachchannellevelwithtesttone,adjustthelevelseitheraccordingtoprogramsourcesorsuit • You canadjustthecurrentchannellevelsasdesired.Theseadjustedarejustmemorizedintouser’smemory("CAL"), ■Note : Adjusting thecurrentchannellevel your tastes.(Fordetails,referto"Adjustingeachchannellevelwithtesttone"onpage21.) not intopresetmemory("REF1","REF2") SETTING THECHLEVELSETUP to selectthedesiredchannel. Press theCURSORUP(▲)/DOWN(▼)buttons Example: WhenselectingDolbyDigitalsource'sLFE CH LVL SETUP
Depending onthespeakersettings("NO",etc),somechannelscannotbeselected.
CH
D0 D LV L ST RETURN DTS : 0dB/-10 ~0 DD : 0dB/-10 ~0 SUBW : 0dB/-15 ~+15 SURR L: 0dB/-15 ~+15 SBACK L: 0dB/-15 ~+15 SBACK R: 0dB/-15 ~+15 SURR R: 0dB/-15 ~+15 RIGHT : 0dB/-15 ~+15 CENTER : 0dB/-15 ~+15 :LEFT 0dB/-15 ~+15 MODE : CAL /REF12 E
AT
UP
:
dB 30
53
• In general,werecommendtheLFEleveltobeadjusted • The LFE level can be adjusted within the range of -10 ~ 0
2. 3.
dB and other channel levels within the range of -15 ~ +15 dB seem toohigh,lowersettingasnecessary. early DTSsoftwareis-10dB.)Iftherecommendedlevels 0 dB.(However,therecommendedLFElevelforsome
channel orprogramsource'sLFEasdesired. buttons toadjustthelevelofselected Press theCURSORLEFT(◀)/RIGHT(▶) channel level. Repeat theabovesteps1and2toadjusteach
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 54 ENGLISh • The adjustedchannellevelshavenowbeenmemorized • Each timetheCURSORLEFT(◀)orRIGHT(▶buttonis • You canmemorizetheadjustedchannellevelsintopreset 1. • Then"1"of"REF1"indicationflickers. 2. memorizing theadjustedchannellevels into theselectedmemory. pressed, "REF1"or2"isselected. whenever youwant. memory("REF 1","REF2")andrecallthememorized press theENTERbutton. current channellevel"procedureonpage53, After performingthesteps1~3in"Adjusting then presstheENTERbutton. buttons toselectthedesiredpresetmemory, Press theCURSORLEFT(◀)/RIGHT(▶) CH MR O DE LV L ST E : AT UP EF1 30 54 • Then thechannellevelsmemorizedintoselected 1. 2. • "CAL" may be displayed instead of "REF 1" or "REF 2". Recalling thememorizedchannellevels preset memoryarerecalled. to selectthe"MODE~". Press theCURSORUP(▲)/DOWN(▼)buttons REF 2. buttons toselectthedesiredoneofREF1and Press theCURSORLEFT(◀)/RIGHT(▶) CH MC O DE LV L ST E : AT UP AL 30 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 55 • Only theanaloginputsignalfromROOM2sourcecanbeheard.So,suretomakeaudioconnection(andselect • When thespeakersareconnectedtoROOM2speakerterminals,besureset“AMP”“ROOM2”.(Fordetails,refer ■Notes: • RETURN :Toreturntothepreviousmenu. • VOL(ROOM 2VOLUME)Toadjustthevolumeonpoweramplifierassignedto“ROOM2”. • IN(ROOM 2INPUT):ToselectthedesiredROOMsource. • ROOM 2(ROOM2MODE):Toturnonoroffthefunction. • The ROOM2functionallowsenjoyingonesourceinthemainroomandplayinganotheradifferentat ■When theROOm2mODEissettoON. • When youdonotusetheROOM2function,turnoff • Even whenthisreceiverentersthestandbymode,insuch • When theROOM2modeissettoOFF,youcannotselect ■Notes: OFF :Toturnitoff.(“R2”goesoff) ON :ToturnontheROOM2function.(“R2”lightsup) 2. 1. analog inputforROOM2sourceifneeded). to “WhenselectingtheAMPASSIGN”onpage43.) same time. ROOM 2functiontosaveelectricity. independently. circuitry operates,theROOM2sourcecanbeplayed a casethat“R2”lightsupstill,meaningonlytheROOM2 the ROOM2INPUTandVOLUME. ↕ SETTING THEMULTI ROOM SETUP MULTI ROOM SET to settheROOM2MODEasdesired. Press theCURSOR to selectthedesireditem. Press theCURSORUP(▲)/DOWN(▼)buttons
LEFT(◀)/RIGHT(▶)
RETURN ROOM 2: OFF/ON
buttons RETURN VOL : 30/MIN(0)~MAX(80) IN : MAIN/ TUNER /CD AUX /F.AUX / VIDEO 1/ V2/iPOD / VIDEO 3/ VIDEO 4
55
• You canadjustthevolumeonpoweramplifier ■When selectingtheROOm2VOLUmE • You canselectthedesiredamongMAINsource,TUNER, ■When selectingtheROOm2INPUT 3.
room. terminals areconnectedtothespeakersinadifferent assigned to“ROOM2”whentheROOM2speaker VIDEO 4. CD, AUX,F.AUX,VIDEO1,V2/iPOD,3and to settheselecteditemasdesired. Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 56 ENGLISh • The parametersettingsarevalidonlywhenlisteninginDolbyProLogicII/DolbyIIxMusicmode. ■Note: • You canadjustthevariousDolbyProLogicII/DolbyIIxMusicparametersforoptimumsurroundeffect. +3 (defaultvalue:0). image, orfromallthreefrontspeakerstovaryingdegrees.Thecontrol canbesetin8stepsfrom0to7(defaultvalue:3). imaging. Select"OFF"or"ON"(defaultvalue:OFF). 3. This graduallyadjuststhesoundfield eithertowardsthefrontorrear.Thecontrolcanbe setin7stepsfrom-3to ■When selectingthe"DImENSION" control This adjuststhecenterimagesoitmaybeheardonlyfrom speaker,onlyfromtheleft/rightspeakersasaphantom ■When selectingthe"C.WIDTh"(CENTERWIDTh)control This modeextendsthefrontstereoimagetoincludesurround speakers foranexciting"wraparound"effectwithsidewall 2. 1. ■When selectingthe"PANORAmA"mode • RETURN:Toreturntothepreviousmenu. • H.GAIN(HEIGHTGAIN):Toadjustthefrontheightchannellevel. • DRCDD/THD(DYNAMICRANGECOMPRESSION:Toadjustthedynamicrangecompressionthatmakesfaintsoundeasier • DOLBY PROLOGICIIMUSICPARAMETERS: To adjustthevariousDolbyProLogicII/DolbyIIxMusic (PANORAMA, C.WIDTH(CENTERWIDTH), When selecting“PANORAmA”,“C.WIDTh”,“DImENSION” DOLBY DIGITAL/DOLBYTRUEHD) DIMENSION) SETTING THEPARAMETER SETUP Press theCURSORUP(▲)/DOWN(▼)buttonstoselectdesiredparameter. PARAMTER SETUP Press theCURSORLEFT(◀)/RIGHT(▶)buttonstoadjustselectedparameterasdesired. Repeat theabovesteps1and 2toadjustotherparameters.
RETURN H.GAIN : LOW /MIDHIGH DRC THD DRC DD DIMENSION : 0/-3~+3 C.WIDTH : 3/0~7 PANORAMA : OFF/ON
parameters foroptimumsurroundeffect.
to hearatlowvolumelevels. RETURN DRC : AUTO /OFFMIDMAX RETURN DRC : OFF/MIDMAX
56
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 57
When selecting “DRC DD”, “DRC ThD” When selecting “h.GAIN”
• This function compresses the dynamic range of previously • You can adjust the front height channel level as desired. specified parts of the Dolby Digital or Dolby TrueHD sound ■Note: track (with extremely high volume) to minimize the • This setting is valid only when listening in Dolby Pro Logic difference in volume between the specified and non- IIz mode. specified parts. This makes it easy to hear all of the sound track when Press the CURSOR UP(▲)/DOWN(▼) buttons
watching movies at night at low levels. 1. ENGLISh ■Notes: to select the “H.GAIN”. • These settings are valid only when the digital signals from the Dolby Digital or Dolby TrueHD program source are being input. • In some Dolby Digital softwares, these settings may not be valid.
1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired “DRC” mode, then press the ENTER button.
2. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the front height channel level as desired.
2. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the dynamic range compression as desired.
→ LOW : To decrease the front height channel level. ↕ MID : To output the front height channel sound with ↕ standard sound volume level. ■When selecting the "DRC DD"(DYNAmIC → HIGH : To increase the front height channel level. RANGE COmPRESSION DOLBY DIGITAL)
→ OFF : To turn off the DRC function ↕ MID ↕ Higher compression → MAX
■When selecting the "DRC ThD"(DYNAmIC RANGE COmPRESSION DOLBY TRUEhD)
→ AUTO : To adjust the dynamic range compression ↕ automatically. OFF : To turn off the DRC function ↕ MID ↕ Higher compression → MAX
57 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 58 ENGLISh 2. 1. • RETURN:Toreturntothepreviousmenu. • POWER(POWERCONTROL): To linkthepowerON/OFFstatusofthisunittocomponents. • CEC(HDMI CONTROL): To linkoperationswithcomponentsconnectedtoHDMIconnectors and compatiblewithHDMI • HDMI(HDMI AUDIOOUT): To outputthedigitalaudiosignalsfromHDMIMONITOROUTconnector. SETTING THEHDMISETUP to selectthedesireditem. Press theCURSORUP(▲)/DOWN(▼)buttons HDMI SETUP buttons tosettheselecteditemasdesired. Press theCURSORLEFT(◀)/RIGHT(▶)
control. RETURN POWER : OFF/ON CEC : OFF/ON HDMI : AMP / THROUGH
58
• Depending onwhetherthedigitalaudiosignalsinputinto • The HDMIconnectioncancarryuncompresseddigital • For detailsonHDMICONTROLand POWERCONTROL, • To usetheARCfunction,TVthatsupports • The HDMIcontrolfunctionmaynotworkdependingonthe ■Notes: • When theHDMICONTROLissettoON,youcanalsouse • The HDMIcontrolfunctionallowsinputselectionofthis • When theHDMIAUDIOOUTissettoTHROUGH,no ■Note:
THROUGH : To outputtheHDMIdigitalaudiosignalsfrom AMP : Not tooutputtheHDMIdigitalaudiosignalsfrom ON : To usetheHDMICONTROLfunction. OFF : Not tousetheHDMICONTROLfunction. correctly. this receiverornot,youshouldsettheHDMIAUDIOOUT the HDMIINareoutputfromMONITOROUTof video signalsanddigitalaudiosignals. 40. refer to“CONFIRMINGTHEHDMI FUNCTION”onpage function oftheHDMI1.4standardsisrequired. connected componentanditssettings. cable. to sendtheaudiosignalsthisreceiverviaaHDMI the ARC(AudioReturnChannel)function,enablingTV components. unit tobeinterlockedwiththeoperationofconnected this unit(exceptROOM2speakers). sound willnotbeheardfromthespeakersconnectedto When selectingthehDmIAUDIOOUT When selectingthehDmICONTROL ↕
↕
connected tothisreceiver. these signalsareheardfromthespeakers the HDMIMONITOROUTofthisreceiver,meaning
TV. signals areheardfromthespeakersofyour the HDMIMONITOROUT,meaningthese
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 59 • The POWERCONTROLcanbesetonlywhentheHDMIistoON. ■Note: • The powercontrolfunctionallowsthestatusofthisunittobeinterlockedwithON/OFFandstartplayback ON : To usethePOWERCONTROLfunction. OFF : Not tousethePOWERCONTROLfunction. of theconnectedcomponents. When selectingthePOWERCONTROL ↕ 59
ENGLISh RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 60
Troubleshooting Guide
If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty.
PROBLEm POSSIBLE CAUSE REmEDY No power • The AC input cord is disconnected. • Connect cord securely. • Poor connection at AC wall outlet or the outlet is • Check the outlet using a lamp or another dead or off. appliance. ENGLISh No sound • The speaker wires are disconnected. • Check the speaker connections. • The master volume is adjusted too low. • Adjust the master volume. • The MUTE button is pressed to ON. • Press the MUTE button to cancel the muting effect. • Incorrect selection of input source. • Select the desired input source correctly. • Incorrect connections between the components. • Make connections correctly. • The HDMI AUDIO OUT is set to THROUGH. • Set it to AMP. (For details, refer to "When selecting the HDMI AUDIO OUT" on page 58.) • The settings related to audio are set incorrectly. • Set the settings correctly. (For details, refer to "SETTING THE INPUT SETUP" on page 45.)
No sound from the surround • Surround mode is switched off(stereo mode). • Select a surround mode. speakers • Master volume and surround level are too low. • Adjust master volume and surround level. • Monaural source is used. • Select a stereo or surround source. • Surround speaker setting is "NO". • Select the desired surround speaker setting.
No sound from the center • Stereo mode, etc is selected. • Select the desired surround mode. speaker • Center speaker setting is "NO". • Select the desired center speaker setting. • Master volume and center level are too low. • Adjust master volume and center level.
No sound from the surround back • The input signal format or the current surround • Under the proper situations, perform the 7.1(or (or front height) speakers mode cannot support the 7.1(or 6.1) surround. 6.1) surround playback.(For details, refer to "ENJOYING SURROUND SOUND" on page 19.) • The surround back channels' power amplifier is • Assign the power amplifier to the surround back assigned to "BIAMP" or "ROOM 2". (or front height) channels.(For details, refer to "When selecting the AMP ASSIGN"on page 43.) • Master volume and surround back (or front height) • Adjust master volume and surround back (or front level are too low. height) level. • Surround back(or front height) speaker setting is • Select the desired surround back (or front height) "NO". speaker setting.
No picture • Video connections between this unit and the • Make proper video connections. monitor TV are not made correctly. • Incorrect selection of input source on the monitor • Select the input source correctly. TV. • The settings related to video are set incorrectly. • Set the settings correctly. (For details, refer to "SETTING THE INPUT SETUP" on page 45.)
No picture with an HDMI • HDMI connection between this unit and the • Make proper HDMI connection. connection monitor TV are not made correctly. • The monitor TV or other equipments do not • This unit will not output video signal unless the support HDCP. connected equipments supports HDCP.
Noise or distorted picture • Video format of your monitor TV, DVD player, etc. • Change the video format to PAL. is different from PAL.
Stations cannot be received • No antenna is connected. • Connect an antenna. • The desired station frequency is not tuned in. • Tune in the desired station frequency. • Antenna is in wrong position. • Move antenna and retry tuning.
Preset stations cannot be • An incorrect station frequency has been memorized. • Memorize the correct station frequency. received • The memorized stations are cleared. • Memorize the stations again.
Poor FM reception • No antenna is connected. • Connect an antenna. • The antenna is not positioned for the best reception. • Change the position of the antenna. • Weak signals. • Install an outdoor FM antenna.
Continuous or intermittent hissing • Noise is caused by motors, fluorescent lamps or • Keep the receiver away from noise sources. noise during AM reception, lightning, etc. especially at night. • Install an outdoor AM antenna.
Cannot connect to network. • Network down. • Check that network is working. • Insufficient signal strength. • Shorten the distance from the wireless LAN’s access point or remote any obstacles.
Internet radio broadcast cannot • Network is disconnected. • Check the connection status. be played. • Program is broadcasting in non-compatible • Only internet radio programs in MP3 and WMA format. formats can be played in this unit. • Internet radio station is not currently • Tune in a radio station that is currently broadcasting. broadcasting.
Remote control unit does not • Batteries are not loaded or exhausted. • Replace the batteries. operate. • The remote sensor is obstructed. • Remove the obstacle.
60 RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 61
Specifications
■AmPLIFIER SECTION • Power output, stereo mode, 6 Ω, THD 0.1 %, 40 Hz~20 kHz | 2× 80 W • Total harmonic distortion at -3 dB, 6 Ω, 1 kHz | 0.02% • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 80 W | 0.05% • Input sensitivity/impedance Line (CD, AUX, VIDEO) | 250 mV/47kΩ • Signal to noise ratio, IHF "A" weighted ENGLISh Line (CD, AUX, VIDEO) | 95 dB • Frequency response Line (CD, AUX, VIDEO), 10 Hz ~ 90 kHz | +0, -3 dB • Output level ROOM 2 OUT, 2.2 kΩ | 250 mV • Bass/Treble control, 100 Hz/10 kHz | ±10 dB • Surround mode, only channel driven Front power output, 6 Ω, 1 kHz, THD 1.0 % | 80 W / 80 W Center power output, 6 Ω, 1 kHz, THD 1.0 % | 80 W Surround power output, 6 Ω, 1 kHz, THD 1.0 % | 80 W / 80 W Surround back /Front height / ROOM 2 power output, 6 Ω, 1 kHz, THD 1.0 % | 80 W / 80 W
■DIGITAL AUDIO SECTION • Sampling frequency | 32, 44.1, 48, 96, 192 khz • Digital input level Coaxial, 75 Ω | 0.5 Vp-p Optical, 660 nm | -15 ~ -21 dBm
■VIDEO SECTION • Video format | PAL • Input sensitivity(=Output level), 75 Ω Video (Composite(normal)) | 1 Vp-p • HDMI connector | 19 pin
■Fm TUNER SECTION • Tuning frequency range | 87.5~108 mhz • Usable sensitivity, S/N 26 dB | - 4 dBu • Signal to noise ratio, mono/stereo | 70 / 60 dB • Total harmonic distortion, 1 kHz, mono/stereo | 0.05 / 1.4 % • Frequency response, 17 Hz~12 kHz | ±3 dB • Stereo separation, 1 kHz | 40 dB • IF rejection ratio | 130 dB
■Am TUNER SECTION • Tuning frequency range | 522~1611 khz • Usable sensitivity, S/N = 20 dB | 54 dBu/m • Signal to noise ratio | 40 dB • Selectivity | 50 dB
■WIRELESS LAN SECTION • Network type (wireless LAN standards) | Confirming to IEEE 802.11 b/g/n • Used frequency range | 2.412 ~ 2.472 mhz
■GENERAL • Power supply | 230 V ~ 50 hz • Power consumption | 230 W • Dimensions (WxHxD, including protruding parts) | 435x143x371 mm(17-3/8x5-5/8x14-5/8 inches) • Weight (Net) | 9.1 kg (20.1 Ibs)
Note: Design and specifications are subject to change without notice for improvements.
61 705i(G) cover_cover.qxp 2010-11-25 오후 4:20 페이지 2
RD-705i NETWORK AV RECEIVER
5707-00000-481-0S