DOCSLIB.ORG

Materials Science and Engineering (MAT SCI) 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Materials Science and Engineering (MAT SCI) 1 Materials Science and Engineering (MAT SCI) 1 MAT SCI 45L Properties of Materials Materials Science and Laboratory 1 Unit Terms offered: Spring 2022, Fall 2021, Spring 2021 Engineering (MAT SCI) This course presents laboratory applications of the basic principles introduced in the lecture-based course MSE45 – Properties of Materials. Courses Properties of Materials Laboratory: Read More [+] Rules & Requirements Expand all course descriptions [+]Collapse all course descriptions [-] MAT SCI 24 Freshman Seminar 1 Unit Credit Restrictions: Students will receive no credit for MSE 45L after Terms offered: Spring 2022, Spring 2020, Spring 2019 taking E45L The Freshman Seminar Program has been designed to provide new Hours & Format students with the opportunity to explore an intellectual topic with a faculty member in a small seminar setting. Freshman seminars are offered in Fall and/or spring: 15 weeks - 3 hours of laboratory per week all campus departments, and topics vary from department to department and semester to semester. Enrollment limited to 20 freshmen. Additional Details Freshman Seminar: Read More [+] Subject/Course Level: Materials Science and Engineering/ Hours & Format Undergraduate Fall and/or spring: 15 weeks - 1 hour of lecture per week Grading/Final exam status: Letter grade. Final exam not required. Additional Details Instructors: Martin, Messersmith Subject/Course Level: Materials Science and Engineering/ Properties of Materials Laboratory: Read Less [-] Undergraduate Grading/Final exam status: Offered for pass/not pass grade only. Final MAT SCI 102 Bonding, Crystallography, and exam required. Crystal Defects 3 Units Terms offered: Fall 2021, Fall 2020, Fall 2019 Freshman Seminar: Read Less [-] Bonding in solids; classification of metals, semiconductors, and MAT SCI 45 Properties of Materials 3 Units insulators; crystal systems; point, line, and planar defects in crystals; examples of crystallographic and defect analysis in engineering materials; Terms offered: Spring 2022, Fall 2021, Spring 2021 relationship to physical and mechanical properties. Application of basic principles of physics and chemistry to the engineering Bonding, Crystallography, and Crystal Defects: Read More [+] properties of materials. Emphasis on establishing structure, property, Rules & Requirements processing, and performance interrelationships in metals, ceramics, and polymers. While core concepts are fully covered each semester, Prerequisites: MAT SCI 45 examples and contextualization in Fall editions focuses on metals, ceramics, and functional/electronic properties and in Spring editions on Hours & Format polymers and soft-materials. Fall and/or spring: 15 weeks - 3 hours of lecture per week Properties of Materials: Read More [+] Rules & Requirements Additional Details Prerequisites: Students should have completed high school AP or Subject/Course Level: Materials Science and Engineering/ honors chemistry and physics Undergraduate Hours & Format Grading/Final exam status: Letter grade. Final exam required. Fall and/or spring: 15 weeks - 3 hours of lecture per week Instructor: Chrzan Additional Details Bonding, Crystallography, and Crystal Defects: Read Less [-] Subject/Course Level: Materials Science and Engineering/ Undergraduate Grading/Final exam status: Letter grade. Final exam required. Instructors: Martin, Messersmith Properties of Materials: Read Less [-] 2 Materials Science and Engineering (MAT SCI) MAT SCI 103 Phase Transformations and MAT SCI 104 Materials Characterization 3 Kinetics 3 Units Units Terms offered: Spring 2022, Spring 2021, Spring 2020 Terms offered: Spring 2022, Spring 2021, Spring 2020 The nature, mechanisms, and kinetics of phase transformations and This 3-unit course will cover basic principles and techniques used for microstructural changes in the solid state. Atom diffusion in solids. Phase the characterization of engineering materials. The course is designed to transformations through the nucleation and growth of new matrix or introduce undergraduate students to the basic principles of structural, precipitate phases. Martensitic transformations, spinodal decomposition. chemical and property characterization techniques. The course is The use of phase transformations to control microstructure. grounded in modern x-ray diffraction and electron microscopy techniques Phase Transformations and Kinetics: Read More [+] for characterization of the chemical and structural properties of a material. Rules & Requirements The course introduces the fundamental theoretical framework for diffraction, spectrometry and imaging methods. Prerequisites: MAT SCI 102 and ENGIN 40 Materials Characterization: Read More [+] Objectives & Outcomes Hours & Format Course Objectives: Materials characterization lies at the heart of Fall and/or spring: 15 weeks - 3 hours of lecture per week understanding the property-structure-processing relationships of Additional Details materials. The goal of the course is to prepare undergraduate students from materials science to understand the basic principles behind Subject/Course Level: Materials Science and Engineering/ material characterization tools and techniques. More specifically, this Undergraduate class will provide students (1) a thorough introduction to the principles and practice of diffraction, (2) introductory exposure to a range of Grading/Final exam status: Letter grade. Final exam required. common characterization methods for the determination of structure and Phase Transformations and Kinetics: Read Less [-] composition of solids. A successful student will learn (1) the theory of x- ray and electron diffraction, (2) basic elements of electron microscopy, (3) basic aspects of optical and scanning probe techniques. Rules & Requirements Prerequisites: MAT SCI 102. A basic knowledge of structure, bonding and crystallography will be assumed Hours & Format Fall and/or spring: 15 weeks - 3 hours of lecture per week Additional Details Subject/Course Level: Materials Science and Engineering/ Undergraduate Grading/Final exam status: Letter grade. Final exam required. Instructors: Scott, Minor Materials Characterization: Read Less [-] Materials Science and Engineering (MAT SCI) 3 MAT SCI 104L Materials Characterization MAT SCI 111 Properties of Electronic Laboratory 1 Unit Materials 4 Units Terms offered: Spring 2022, Spring 2021, Spring 2020 Terms offered: Spring 2022, Spring 2021, Spring 2020 This 1-unit laboratory course covers X-ray diffraction (XRD), scanning Introduction to the physical principles underlying the electric properties of electron microscopy (SEM), and transmission electron microscopy (TEM), modern solids with emphasis on semiconductors; control of defects and as well as lab writeup protocols and academic integrity. Students will impurities through physical purification, bulk and thin film crystal growth get hands-on experience using the XRD, SEM and TEM equipment to and doping processes, materials basis of electronic and optoelectronic perform microstructural characterization of materials. Students will also devices (diodes, transistors, semiconductor lasers) and optical fibers; design and run their own project on a topic of their choosing. properties of metal and oxide superconductors and their applications. Materials Characterization Laboratory: Read More [+] Properties of Electronic Materials: Read More [+] Objectives & Outcomes Rules & Requirements Course Objectives: Practical experience on the most common materials Prerequisites: PHYSICS 7A, PHYSICS 7B, and PHYSICS 7C; or characterization equipment for structural and chemical analysis of PHYSICS 7A, PHYSICS 7B and consent of instructor materials. Introduction to laboratory procedures and independent projects. Hours & Format Rules & Requirements Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week Prerequisites: MAT SCI 102; and MAT SCI 104 must be taken concurrently. A basic knowledge of structure, bonding and Additional Details crystallography will be assumed. Undergraduate student in engineering, Subject/Course Level: Materials Science and Engineering/ physics or chemistry Undergraduate Hours & Format Grading/Final exam status: Letter grade. Final exam required. Fall and/or spring: 15 weeks - 1.5 hours of laboratory and 1 hour of Instructors: Dubon, Wu, Yao discussion per week Properties of Electronic Materials: Read Less [-] Additional Details Subject/Course Level: Materials Science and Engineering/ MAT SCI 112 Corrosion (Chemical Properties) Undergraduate 3 Units Terms offered: Spring 2022, Spring 2021, Spring 2020 Grading/Final exam status: Letter grade. Final exam not required. Electrochemical theory of corrosion. Mechanisms and rates in relation to physiochemical and metallurgical factors. Stress corrosion and Instructors: Scott, Minor mechanical influences on corrosion. Corrosion protection by design, Materials Characterization Laboratory: Read Less [-] inhibition, cathodic protection, and coatings. Corrosion (Chemical Properties): Read More [+] Rules & Requirements Prerequisites: MAT SCI 45 and ENGIN 40 Hours & Format Fall and/or spring: 15 weeks - 3 hours of lecture per week Additional Details Subject/Course Level: Materials Science and Engineering/ Undergraduate Grading/Final exam status: Letter grade. Final exam required. Instructor: Devine Corrosion (Chemical Properties): Read Less [-] 4 Materials Science and Engineering (MAT SCI) MAT SCI 113 Mechanical Behavior of MAT SCI 117 Properties of Dielectric and Engineering Materials 3 Units Magnetic Materials 3 Units Terms
Load more

Recommended publications
  • Engineering Physics
    COLLEGE OF ENGINEERING Engineering Physics WHY ENGINEERING PHYSICS? graduates have gone on to become the CEO Engineering is about the way things work. of Eastman Kodak Co., work as acoustical Physics is about why things work the way engineers for Disney, work for the CIA, thrive they do. By combining the two, engineering in the financial sector, work in nuclear physics students are able to satisfy their engineering at Seabrook Nuclear Power Plant, curiosity and ultimately gain a deeper manage the power flow for northern New understanding of the engineering problems England, work as radiation physicists at medical centers, and become high-level UM aine’s ADVANTAGE they are working to solve. executives at SanDisk and Avis. • Professors with Ph.D. degrees, not graduate WHY STUDY ENGINEERING PHYSICS AT UMAINE? RESEARCH OPPORTUNITIES students, teach classes UMaine engineering physics was the first UMaine engineering physics students are able • State-of-the-art teaching and accredited engineering physics program in to take advantage of a myriad of research research facilities the world. Currently, it is one of only 20 programs in the U.S. and the only opportunities as undergraduates — some as • Small, student-centered accredited one in New England. e early as their freshman year. Many work classes Department of Physics and Astronomy in closely with scientists in UMaine’s Laboratory for Surface Science and Technology, which is • Opportunities to do conjunction with the College of Engineering undergraduate research offers bachelor’s and master’s degrees in internationally known for cutting-edge alongside faculty engineering physics. e curriculum research with sensors.
    [Show full text]
  • B.Sc. Mechatronics Specialization: Photonic Engineering
    Study plan for: B.Sc. Mechatronics Specialization: Photonic Engineering Faculty of Mechatronics Study plan for reference only; may be subject to change. Semester 1 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 Patents and Intelectual Property 30 2 Optics and Photonics Applications 30 15 3 Calculus I 30 45 7 Algebra and Geometry 15 30 4 Engineering Graphics 15 30 2 Materials 30 2 Computer Science I 30 30 6 Engineering Physics 30 30 4 Total ECTS 30 Semester 2 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 Economics 30 2 Elective Lecture 1/Virtual and 30 3 Augmented Reality Calculus II 30 30 5 Engineering Graphics ‐ CAD 30 2 Computer Science II 15 15 5 Mechanics I i II 45 45 6 Mechanics of Structures I 30 15 4 Electric Circuits I 30 15 3 Total ECTS 30 1 Study Plan for B.Sc. Mechatronics (Spec. Photonic Engineering) Semester 3 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 0 Foreign Language 60 4 Elective Lecture 2/Introduction to 30 3 MEMS Calculus III 15 30 6 Mechanics of Structures II 15 15 4 Manufacturing Technology I 30 4 Fine Machine Design I 15 30 3 Electric Circuits II 30 3 Basics of Automation and Control I 30 15 4 Total ECTS 31 Semester 4 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 Foreign Language 60 4 Elective Lecture 3/Photographic 30 3 techniques in image acqusition Elective Lecture 4 30 3 /Enterpreneurship Optomechatronics 30 30 5 Electronics I 15 15 2 Electronics II 15 1 Fine Machine Design II 15 15 3 Manufacturing Technology 30 2 Metrology 30 30 4 Total ECTS 27 Semester 5 Course Lecture Tutorial Labs Pojects ECTS (hours) (hours) (hours) (hours) Physical Education and Sports 30 0 Foreign Language 60 4 Marketing 30 2 Elective Lecture 5/ Electric 30 2 2 Study Plan for B.Sc.
    [Show full text]
  • Engineering Physics I Syllabus COURSE IDENTIFICATION Course
    Engineering Physics I Syllabus COURSE IDENTIFICATION Course Prefix/Number PHYS 104 Course Title Engineering Physics I Division Applied Science Division Program Physics Credit Hours 4 credit hours Revision Date Fall 2010 Assessment Goal per Outcome(s) 70% INSTRUCTION CLASSIFICATION Academic COURSE DESCRIPTION This course is the first semester of a calculus-based physics course primarily intended for engineering and science majors. Course work includes studying forces and motion, and the properties of matter and heat. Topics will include motion in one, two, and three dimensions, mechanical equilibrium, momentum, energy, rotational motion and dynamics, periodic motion, and conservation laws. The laboratory (taken concurrently) presents exercises that are designed to reinforce the concepts presented and discussed during the lectures. PREREQUISITES AND/OR CO-RECQUISITES MATH 150 Analytic Geometry and Calculus I The engineering student should also be proficient in algebra and trigonometry. Concurrent with Phys. 140 Engineering Physics I Laboratory COURSE TEXT *The official list of textbooks and materials for this course are found on Inside NC. • COLLEGE PHYSICS, 2nd Ed. By Giambattista, Richardson, and Richardson, McGraw-Hill, 2007. • Additionally, the student must have a scientific calculator with trigonometric functions. COURSE OUTCOMES • To understand and be able to apply the principles of classical Newtonian mechanics. • To effectively communicate classical mechanics concepts and solutions to problems, both in written English and through mathematics. • To be able to apply critical thinking and problem solving skills in the application of classical mechanics. To demonstrate successfully accomplishing the course outcomes, the student should be able to: 1) Demonstrate knowledge of physical concepts by their application in problem solving.
    [Show full text]
  • Engineering Physics I & Ii
    ENGINEERING PHYSICS I & II DIPLOMA COURSE IN ENGINEERING FIRST AND SECOND SEMESTER A Publication under Government of Tamilnadu Distribution of Free Textbook Programme (NOT FOR SALE) Untouchability is a sin Untouchability is a crime Untouchability is a inhuman DIRECTORATE OF TECHNICAL EDUCATION GOVERNMENT OF TAMILNADU Government of Tamilnadu First Edition – 2015 THIRU. PRAVEEN KUMAR I.A.S Principal Secretary / Commissioner of Technical Education Directorate of Technical Education Guindy, Chennai- 600025 Dr. K.SUNDARAMOORTHY, M.E., Phd., Additional Director of Technical Education (Polytechnics) Directorate of Technical Education Guindy, Chennai- 600025 Co-ordinator Convener Er. R.SORNAKUMAR M.E., THIRU. K.SELVARAJAN M.Sc., Principal HOD (UG) / Physics Dr. Dharmambal Government Institute of Chemical Technology Polytechnic College for Women Tharamani, Chennai—113 Tharamani, Chennai—113 Reviewer Dr.K.SIVAKUMAR, M.Sc., Phd., Professor of Physics and Dean, Regional office Anna University, Madurai—7. Authors Dr.K.RAJESEKAR, M.Sc., Phd., Lecturer (UG)/ Physics Government Polytechnic College Nagercoil THIRU.G.MOHANA SUNDARAM, M.Sc.,M.Phil.,M.Ed., THIRU S.NAGARAJAN, M.Sc., HOD(UG)/Physics HOD(UG)/ Physics Central Polytechnic College Government Polytechnic College, Taramani, Chennai-113. Purasaiwakkam, Chennai –12 THIRU.N.SARAVANAN, M.Sc.,M.Phil,M.Ed., TMT.G.INDIRA, M.Sc.,M.Phil., HOD(UG)/Physics Lecturer/Physics Meenakshi Krishnan Polytechnic College Dr. Dharmambal Government Pammal, Chennai—75 Polytechnic College for Women Tharamani, Chennai—113 This book has been prepared by the Directorate of Technical Education This book has been printed on 60 G.S.M Paper Through the Tamil Nadu Text book and Educational Services Corporation ii FOREWORD With the concept of Global Village after liberalisation and globalisation, our country India has become one of the most sought after destinations by many Multi National Companies for investment.
    [Show full text]
  • Tennis Court Cleaner
    Robotics Overview: The purpose of this session is to learn some basics about autonomous robots. What is a robot? A robot is a specialized kind of intelligent agent. Intelligent agents represent any kind of active decision-making behavior based on achieving some goal. Robots usually mean intelligent agents that are specifically designed to sense and adjust the “real world.” A good example of an intelligent agent that is not a robot would be a smart “physicians assistant” which helps diagnose patients and keeps track of multiple drug interactions. A good example of an intelligent agent that is a robot is the Martian explorer Opportunity. Figure 1: How robots, a type of intelligent agent, typically interact with the world. Figure 1 shows how most robots are designed to interact with the world, known as the feedback control loop. The field of robotics spans many disciplines essentially because of this diagram: sensors and actuators are built using knowledge of chemistry, physics, engineering, medicine and biology. Controls are built using knowledge of computer science, mathematics, and psychology. We will mostly worry about control, or the mind here. A primitive way to implement the idea of memory is to use a state machine. If you think about how you think (a subject of psychology and artificial intelligence) your mind often has these states: when hungry seek pizza, when sleepy seek bedroom, when board call friends, etc. A state diagram formalizes this kind of state-of-mind kind of thinking which helps to design robots to behave “intelligently.” State diagrams can have many states and ways to transition from one state to another.
    [Show full text]
  • Engineering Physics Dept: Engineering and Physics Major: Electrical Engineering College: Mathematics and Science Degree: Master of Science (M.S.) Major Code: 6633
    University of Central Oklahoma Graduate Catalog 2021-2022 Program: Engineering Physics Dept: Engineering and Physics Major: Electrical Engineering College: Mathematics and Science Degree: Master of Science (M.S.) Major Code: 6633 Engineering Physics - Electrical Engineering, M.S. This major is designed so that its graduates can enter industry/government as practicing engineers or pursue research and teaching careers with government and/or academic institutions. The major also provides advanced study in electrical engineering, with emphasis in communications and signal processing, for students who intend to pursue a Ph.D. degree in Electrical Engineering or related fields. Graduate Advisor: Dr. Yuhao Jiang Graduate Studies. Email: [email protected] Students applying for a Master Degree through the Accelerated Office: STEM 242 BS/MS Degree Program must submit the following items to the Phone: 405 - 974 - 5472 Engineering Physics Department Accelerated Program Admissions Committee: Admission Requirements • Application for admission received by March 5 in the spring semester of the junior year. Submit the following items to: • Official copies of transcripts from each institution attended. Jackson College of Graduate Studies Transcripts must show: 100 N. University Drive, NUC 404 ◦ The applicant is a UCO Electrical Engineering major; Edmond, OK 73034 ◦ A minimum overall GPA of 3.00; • Online application for admission (www.uco.edu/graduate/). ◦ A minimum GPA of 3.00 in all Engineering and Physics • Official copies of undergraduate and graduate transcripts from courses specified in the junior year for their major. Grades each institution attended with all degrees posted. All transcripts for engineering courses taken in the spring semester of the must be from accredited institutions.
    [Show full text]
  • 2008 NSF-Sponsored Report: the Future of Materials Science And
    THE FUTURE OF MATERIALS SCIENCE AND MATERIALS ENGINEERING EDUCATION A report from the Workshop on Materials Science and Materials Engineering Education sponsored by the National Science Foundation September 18-19, 2008 in Arlington, VA TABLE OF CONTENTS Summary . 5. Summary of the Recommendations . 9. Public Education and Outreach Recommendations . 9. Kindergarten through 12th Grade (K-12) Education Recommendations . 9. Undergraduate Education Recommendations . 10. Graduate Education Recommendations . 10. 1. Public Education and Outreach . 13. 1 .1 Introduction . 13. 1 .2 What Does the Public Know? . 13. 1 .3 What Should the Public Know? . 14. 1 .4 How Does the Public Learn About Materials Science and Materials Engineering? . 17. 1 5. How Can the Materials Community Promote Learning Using Informal Science Education? . 20. 1 .6 What is the Impact of Outreach Activities on the Career Development of Faculty? . 21. 1 .7 Recommendations . 22. 2. Kindergarten Through 12th Grade (K-12) Education . 23. 2 .1 Introduction . 23. 2 .2 Materials Education Standards and Curricula for K-12 Students . 24. 2 .3 Professional Development of K-12 Teachers . 27. 2 .4 Career Awareness for K-12 Students . 28. 2 .5 Recommendations . 29. 3. Undergraduate Education . 31. 3 .1 Introduction . 31. 3 .2 Curriculum Development . 32. 3 .3 Recruiting and Retaining Students in MSME . 34. 3 .4 Recommendations . 35. 4. Graduate Education . 37. 4 .1 Introduction . 37. 4 .2 Course Curriculum . 39. 4 .3 Interdisciplinary Training . 41. 4 .4 Career Preparation . 43. 4 .5 Recommendations . 44. 5. Cross-Cutting Theme: Use of Information Technology in MSME Education and Research . 45. 6. Workshop Program . 47. 7.
    [Show full text]
  • Engineering Physics a Guide for Undergraduate Majors
    Engineering Physics A Guide for Undergraduate Majors Last modified Fall 2015 This guide applies to students entering the program after August 2015. Students admitted prior to this should continue to follow the Undergraduate Student guide in effect when they entered the program. They may petition the department to select features of the new curriculum. Administered by the Department of Engineering Physics 153 Engineering Research Building, 1500 Engineering Drive, Madison, WI 53706-1609 Phone: (608) 263-1646, Fax: (608) 263-7451, Internet: www.engr.wisc.edu/ep/ Introduction The Engineering Physics Undergraduate Program (EP) is administered by the Department of Engineering Physics. The Department Office is room 153 Engineering Research Building (ERB). The Department Chair’s office is also in room 153 ERB. The department also administers the Engineering Mechanics undergraduate and graduate programs (EM) as well as the Nuclear Engineering undergraduate (NE) and the Nuclear Engineering and Engineering Physics graduate programs (NEEP). This guide is intended to provide Engineering Physics undergraduate students with information that will facilitate their studies at the University of Wisconsin-Madison. In addition to this guide, you should consult the Undergraduate Catalog (www.pubs.wisc.edu/ug/engr_engphys.htm) for requirements, objectives, and course descriptions. You may also find the resources page at the UW website helpful https://www.admissions.wisc.edu/ The Engineering Physics Department web site is www.engr.wisc.edu/ep.html. There are links to the Engineering Physics, Engineering Mechanics, and Nuclear Engineering programs. Updated curriculum and course information is included on the department website. The College of Engineering website (www.engr.wisc.edu/ep.html) also provides information for engineering students.
    [Show full text]
  • Curriculum for Engineering Physics with Concentration in Electrical and Computer Engineering
    CURRICULUM FOR ENGINEERING PHYSICS WITH CONCENTRATION IN ELECTRICAL ENGINEERING (126-128 Credits) PROFESSIONAL ORIENTATION (1 Cr. Required) Selected from the following Introduction to AE & ME AENG/MENG 1001 1 Biomedical Engineering Orientation BME 1000 1 Introduction to ECE ECE 1001 1 Introduction to Physics PHYS 1110 1 BASIC SCIENCE & MATHEMATICS (46 Cr.) (ABET Minimum = 32 Cr.) General Chemistry I/Lab CHEM 1110/1115 4 Calculus I MATH 1510 4 Calculus II MATH 1520 4 Calculus III MATH 2530 4 Differential Equations I MATH 3550 3 Advanced Mathematics for Engineers MATH 3270 3 Numerical Analysis MATH 3240 3 Foundations of Statistics MATH 3850 3 Engineering Physics I/Lab PHYS 1610/1620 4 Engineering Physics II/Lab PHYS 1630/1640 4 Modern Physics/Lab PHYS 2610/2620 4 Classical Mechanics PHYS 3110 3 Quantum Mechanics PHYS 4610 _3 46 ENGINEERING PHYSICS & ENGINEERING TOPICS (50-51 Cr.) (ABET Minimum = 48 Cr.) Intro. to CS: Scientific Programming CSCI 1060 3 Engineering Circuits I ECE 2101 3 Engineering Circuits II ECE 2102 3 Electrical Science Lab ECE 2103 1 Semiconductor Devices ECE 3130 3 Electromagnetic Fields ECE 3140 3 ECE Design I, II (Senior Project) ECE 4800, 4810 6 Optics/Lab PHYS 3310/3320 4 Thermodynamics & Statistical Mechanics PHYS 3410 3 2 Engineering Physics Electives PHYS 4XXX _6 35 Track 1 Electromagnetic Fields and Waves Electric Energy Conversion ECE 3110 3 Communication Systems ECE 4160 3 Electromagnetic Waves ECE 4140 3 2 Engineering Electives Selected in consultation with advisor 6 15 Track 2 Analog Electronics Linear Systems
    [Show full text]
  • Engineering Physics 1
    Engineering Physics 1 PHYS 1020 (4) Physics of Everyday Life 2 ENGINEERING PHYSICS Intended primarily for nonscientists, this course is a continuation of PHYS 1010. Includes electrical power generation and distribution, Engineering physics provides students with a broad exposure to the basic electrical motors, radio, television, computers, copiers, lasers, fluorescent physical theories and mathematical techniques underlying engineering. lights, cameras, and medical imaging. Department enforced prereq., high The program may be specialized to meet the student's interests through school algebra. engineering electives. Most students become involved in laboratory Requisites: Requires prerequisite course of PHYS 1010 (minimum grade research, and graduates find opportunities in optics, electronics, C-). magnetics, and other hardware-based job markets. The program also Additional Information: GT Pathways: GT-SC1 - Natural Physcal Sci:Lec provides excellent preparation for graduate study in physics, applied Crse w/ Req Lab physics, and other areas of the natural sciences and engineering. Arts Sci Core Curr: Quant Reasn Mathmat Skills Arts Sci Core Curr: Natural Science Sequence The engineering physics program focuses on the foundations of Arts Sci Core Curr: Natural Science Lab modern technology. The program prepares students for research, Arts Sci Gen Ed: Distribution-Natural Sciences development, and entrepreneurial careers in many frontier areas of Arts Sci Gen Ed: Quantitative Reasoning Math engineering, including quantum devices, ultra fast lasers, adaptive optics, Arts Sci Gen Ed: Distribution-Natural Sci Lab cryogenic electronics, computer simulation of physical systems, solar cells, magnetic storage technology, micro-mechanical systems, and PHYS 1110 (4) General Physics 1 molecular electronics. All students study the core theoretical subjects Three lect., one rec.
    [Show full text]
  • Engineering Physics Advising Guide
    Undergraduate Advising Guide Academic Year 2019-2020 Duane Physics, E1B32 390 UCB Boulder, CO 80309-0390 www.colorado.edu/physics Table of Contents Introduction .................................................................................................................................................. 1 Engineering Physics Mission Statement ....................................................................................................... 1 Engineering Physics Overview ...................................................................................................................... 1 Employment Opportunities for Engineering Physics Graduates .................................................................. 2 Engineering Physics Curriculum .................................................................................................................... 2 Academic Advising Policy .............................................................................................................................. 3 Advising Required Every Semester ........................................................................................................... 3 Student E-mail Policy ................................................................................................................................ 3 Questions .................................................................................................................................................. 3 Additional Advising Resources .....................................................................................................................
    [Show full text]
  • BS in Electrical Engineering & Physics (Dual Degree) Academic Plan of Study
    B.S. in Electrical Engineering & Physics (dual degree) Academic Plan of Study William States Lee College of Engineering + College of Liberal Arts & Sciences Dept. of Electrical and Computer Engineering + Dept. of Physics & Optical Science ece.uncc.edu & physics.uncc.edu PROGRAM SUMMARY • Credit Hours: 133 hours • Concentrations: No • Declaring the Major: Students should declare a dual degree in Physics and Engineering by their sophomore or junior year. • Advising (For the Major): (Engineering) Ms. Jerena McNeil, [email protected] or another Engineering advisor; (Physics) Dr. Tom Suleski, [email protected] • Advising (For General Education): Engineering Advisor • Minimum Grades/GPA: Students must have a 2.0 or higher average in Physics courses to graduate. A “C” or better is required in most PHYS classes before students can progress to the next PHYS course. Students must have a 2.0 overall GPA as well as in engineering courses. • Teacher Licensure: No • Evening Classes Available: Some but need to take day classes to complete requirements. • Weekend Classes Available: No • Other Information: College Internships, Co-ops, Leadership Academy, Freshmen Learning Community. • Contact(s): (Engineering) Ms. Jerena McNeil Undergraduate Student Services Specialist ([email protected], 704-687-8445, EPIC 2242); (Physics) Dr. Tom Suleski, [email protected] PROGRAM REQUIREMENTS To obtain a dual B.S. degree in Electrical Engineering and Physics, an undergraduate student must complete all requirements for the B.S.E.E. degree as established by the Department of Electrical and Computer Engineering. In addition, the student must complete 12 hours of upper division physics courses specified by the Department of Physics and Optical Science with an average grade of C or above.
    [Show full text]