040-00078-01 REV5 King Kong of Skull Island™ Operator’s Manual
Skull Island, Kong: King of Skull Island, King Kong of Skull Island © DeVito ArtWorks, LLC, 1997, 2004, 2017 Software™ & © 2020 Raw Thrills, Inc. All Rights Reserved.
This Page Left Blank Intentionally
King Kong of Skull Island™
Table of Contents Safety ...... 5 Operation ...... 5 Transporting ...... 5 Handling Components ...... 5 Disconnect Power ...... 5 Grounding ...... 5 Electrical Shocks ...... 5 Monitor ...... 5 Power Selector ...... 5 Power Cord ...... 5 Surge Suppressor ...... 6 Water and Other Liquid Sources ...... 6 Connectors ...... 6 Computer ...... 6 Tempered Glass Warning ...... 6 Ventilation ...... 6 Hazard to Epileptics ...... 6 Manual ...... 6 Specifications ...... 7 Product Specifications ...... 8 Electrical Power ...... 8 Temperature ...... 8 Humidity ...... 8 Dimensions ...... 8 Fuse Replacement Guide ...... 8 12V Power Distribution ...... 8 Setup ...... 9 Safety Notice ...... 9 Unpack Materials ...... 9 Required Tools ...... 9 Cabinet Assembly ...... 10
3 | P a g e
King Kong of Skull Island™
Upper Monitor Installation ...... 10 Headset Arm Setup ...... 12 Positioning Cabinets for Harness and Air Line Connections ...... 13 Joining the Four Cabinets Together ...... 14 Card Reader Installation and Setup ...... 15 Check Electrical Settings ...... 16 Startup Game ...... 16 Headset Calibration Guide ...... 17 Diagnostics and Adjustments ...... 22 Basic Functional Test on Initial Power Up ...... 23 Test Menus ...... 24 Main Menu ...... 24 Diagnostics ...... 25 Pricing and Payout Adjustments (Cash) ...... 26 Pricing and Payout Adjustments (Tokens) ...... 27 Pricing and Payout Adjustments (Swipes) ...... 28 Game Settings ...... 29 System Settings ...... 30 Audits ...... 31 Resets ...... 32 Volume ...... 33 Calibration ...... 34 Utilities ...... 35 System Information...... 36 Choosing the Right Pricing Adjustments for Your Location ...... 37 PC Hardware ...... 38 PC Hard Drive Recovery ...... 39 Troubleshooting ...... 40 Electrical and Mechanical Illustrations ...... 46
4 | P a g e
King Kong of Skull Island™
Safety Operation Before operating game, read this manual. Failure to properly install and operate this game could result in malfunction or accident. Operate the game in accordance with the manual. Transporting The upper monitor assembly weighs approximately 95 lbs. and the installation requires a minimum of three people, using two 6-foot step ladders (minimum height). It is preferred that the main cabinet be moved to or very near its desired operational location before beginning any of the set-up tasks. It is also strongly recommended that the game NOT be moved with the monitor installed in the upright position. It contains fragile glass and electronic components. Avoid rough handling.
Handling Components Many components are extremely sensitive to handling, environmental and Electrostatic Discharge (ESD) events— especially the computer. Do not handle it roughly. Before servicing, contact your distributor and inquire about the PC warranty. Use proper ESD procedures when servicing. Protect components from harmful environmental conditions, such as extreme temperatures, excessive moisture, or other damaging effects. Disconnect Power Always turn the power off and unplug the unit before servicing or making adjustments unless otherwise instructed. Installing or repairing components while power is on can damage the components and void the warranty. Grounding Avoid electrical shock. Do not plug in AC power until you have inspected and properly grounded the unit. Only plug into a grounded, three-wire outlet. Do not use a “cheater” plug or cut off the ground pin on the line cord. Electrical Shocks There is no isolation transformer in the cabinet. Disconnect AC power before servicing. However, be aware that lethal voltages can remain in the electronic components even when AC power is disconnected. Use extreme caution when servicing. Verify that there is a working ground connection. If the unit sustains water damage, cease using it immediately and unplug AC power. Monitor The monitors contain no user serviceable parts. Do not attempt to service the monitors. Power Selector Before installing game, ensure the voltage on the PC and power supply is set properly. There is a 120/230 VAC selector switch that must be set for the correct voltage for your site. The setting must match the line voltage at the installation site. Power Cord If the power cord is damaged or lost, replace it with an identical cord as supplied by the manufacturer or an authorized service agent.
5 | P a g e
King Kong of Skull Island™
Surge Suppressor It is recommended that you plug your game’s power cord into a surge suppressor to help protect from power surges that may damage sensitive electronic components. Water and Other Liquid Sources Do not install game near sprinkler or other water jet sources. Do not use water jet to clean game. Keep minimum clearance behind game and wall for proper ventilation but also prevent access of liquid from spills and sprays from entering ventilation holes. Connectors When servicing machine, ensure all connectors mate properly. If connectors do not slip in easily, do not force them. Connectors are often keyed and only connect one way. Check for correct orientation. Computer The computers contain sensitive components, including a hard drive. Do not handle it roughly. Contact your distributor before servicing its internal components. Ask about warranty information as it relates to the PC. Cycle AC power on or off with the cabinet power switch. A dongle has been inserted into one of the USB ports. This is required for game play. Do not remove the dongle except for troubleshooting purposes. Tempered Glass Warning When handling the LCD display glass cover take special care and set the glass down softly on a flat surface free of debris. The edge of the glass is sensitive to hard impact. Shattered glass from the monitor can travel long distances and cause bodily injury. Use proper procedures when handling broken materials. Ventilation It is critical that the game is installed in a manner that allows for proper ventilation and air flow. Game must be installed so that there is a minimum amount of clearance between the wall or another game to allow good air circulation through the game cooling fan and vents. Hazard to Epileptics A small portion of the population has an epileptic condition that may cause seizures. Affected persons experience seizure while watching some television pictures or playing certain video games. People who have not had seizures may still have an undetected epileptic condition. If anyone in your family has experienced epilepsy symptoms (seizures or loss of awareness), consult your physical before using video games. While children play video games, a parent should observe. Be alert to the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions. If you or your child experiences these symptoms, discontinue use immediately and consult your physician. Manual Keep this manual available and ready for use. If the game fails to function properly, turn off the machine and unplug the AC line cord. Contact your local distributor. You may not reproduce this document or any of its contents without written authorization from Raw Thrills, Inc.
6 | P a g e
King Kong of Skull Island™
Specifications For reasons such as performance, this product’s specifications may change without notice. Federal patent, copyright and other intellectual property laws protect the content, devices and design of the game and its equipment. CAUTION
• This machine features moving parts and should only be serviced by a trained and experienced technician. • Turn off all power and air supply before servicing the machine. • Keep area around the machine clear and free of objects that present a trip hazard. Allow for plenty of room for players to safely enter and exit the machine. • Observe ALL of the following guidelines to prevent injury, accident, or damage. o Maximum of two persons on the machine at any time. o If a player fatigues or experiences motion sickness or is unable to continue the game for any reason, stop the game motion immediately by pressing the MOTION STOP button. Allow the person to rest and exit the game with assistance if needed. o Remain seated for the entire duration of the game. Do not stand or exit while the game is moving. Press the MOTION STOP button before exiting the game. o Keep hands and legs inside the game at all times while in motion. Remain in the game until game comes to a complete stop. o Do not attempt to reach for objects on the floor or near the game when it is moving. Stay clear and stand at a safe distance while game is in motion. o Small children should always be accompanied by a parent or guardian. • The machine is equipped with safety features which the operator and the player need to be familiar with: o MOTION STOP button is located between player 1 and 2 seats. Additionally, there are MOTION STOP buttons located in front of player 1 and 2. These buttons will stop the motion feature once pressed. o Bellows around the moving part of the machine prevent access between the base and the moving part. Make sure that the bellows are not damaged or showing signs of excessive wear that could lead to failure. Replace the bellows when this occurs. Use only tamper proof screw fasteners as specified. o The machine is designed so that there is no unintended movement in the absence of a logic signal as might be experienced during a power outage. Make sure that the machine is safe to operate before turning power back ON. • Critical parts should be maintained and inspected regularly for safe operation. If those critical parts are damaged, broken, or installed incorrectly, replace them, or install correctly. Use only manufacturer’s specified parts for continued safety and reliability. Contact your distributor to order replacement parts.
7 | P a g e
King Kong of Skull Island™
Product Specifications Electrical Power MULTIPLE POWER SUPPLY ENTRIES Warning: Before obtaining access to terminals, all supply circuits must be disconnected. Attention: Avant d’accéder aux bornes, tous les circuits d’alimentation doivent être déconnectés.
United States, Canada (ETL) Voltage: 120VAC / 60 Hz Operating AC Current: 20 Amps (10 Amps per entry)
International (CE) Voltage: 230VAC / 50Hz Operating AC Current: 10 Amps (5 Amps per entry)
Temperature 50° F to 104° F (10° C to 40° C)
Humidity Must not exceed 95% relative humidity
Dimensions 114.17”H x 49.5”W x 122.34”D (2.90m H x 1.26m W x 3.11m D) Approximate weight 1500lbs. (~650kg) Recommended minimum floor space requirement: 120.00”H x 97.50”W x 134.27”D (3.05m H x 2.48m W x 3.41m D) ***see pg. 47 for diagram***
Fuse Replacement Guide NOTE: FOR CONTINUED PROTECTION AGAINST FIRE AND ELECTRICAL DAMAGE, USE ONLY SPECIFIED FUSE TYPE AND VALUE.
12V Power Distribution Please see unit for specified fuse labeling. Abbreviations: 5A 250V 5A, 250VAC Fast Acting 3AG Fuse Littlefuse 0312005.MXP (or equivalent)
8 | P a g e
King Kong of Skull Island™
Setup Safety Notice Installing this product requires three individuals able to lift heavy objects safely. Two 6-foot step ladders (minimum height) are required as part of the installation process. Make sure that you are familiar with the manual contents, game setup, and operations before you begin the installation process. Do not push or pull on the decorative items such as the monitor bracket or red vacuum formed nose cover to move the game. Doing so can damage the decorative items. Be aware of your surroundings and individuals around you during the installation process for your safety and the safety of others. Work only in an area with sufficient lighting and a clean level surface. Unpack Materials 1. Place the shipping crate(s) on a flat, stable surface. 2. Cut the banding straps and remove the cardboard lids. 3. Lift off the large cardboard containers surrounding the cabinet assembly and remove any shipping cleats. 4. Remove the keys from the front dash. 5. Check for shipping damage to the following: • Monitor(s) • Monitor bracket • Headset arm(s) • Headset(s) • Cabinet decals 6. Check the AC line cords for visible signs of damage. Pay particular attention to the plug and line cord insulation.
Required Tools 1. (2) 6-foot step ladders 2. Drill/driver with bit holder 3. T-27 tamper resistant Torx bit 4. T-25 tamper resistant Torx bit 5. T-20 tamper resistant Torx bit 6. 3/8” ratchet wrench 7. 3/4” socket 8. 10mm socket
Check the King Kong of Skull Island™ game page for the most up to date info!
rawthrills.com/king-kong-of-skull-island/
9 | P a g e
King Kong of Skull Island™
Cabinet Assembly CAUTION
UNDER NO CIRCUMSTANCES SHOULD THIS GAME BE OPERATED UNLESS ALL INSTALLATION PROCEDURES HAVE BEEN COMPLETED AND ALL SAFETY FEATURES HAVE BEEN POSITIVELY TESTED AND ARE FULLY FUNCTIONAL! Upper Monitor Installation The upper monitor assembly weighs approximately 95 lbs. and the installation requires a minimum of three people, using two 6-foot step ladders (minimum height). It is recommended that the main cabinet be moved to or very near its desired operational location before beginning any of the setup tasks (see pg. 47 for footprint measurements). It is also strongly recommended that the game NOT be moved with the monitor installed in the operational (upright) position.
1. Rotate the monitor bracket up into the operational (upright) position (fig. a below) and install the four 1/4-20 x 1" screws to secure the bracket to the top of the main cabinet (fig. b below).
fig. a fig. b
2. Place two ladders next to the cabinet and remove the monitor assembly from the packaging. 3. With the main cabinet standing alone and both headset arms in the down position, walk the monitor assembly up the ladders and hook onto top of the monitor bracket.
10 | P a g e
King Kong of Skull Island™
4. Make sure the brackets are mated properly and install two bottom 6MM x 20MM VESA mount screws and washers (fig. c items A, below) in the lower back mounting brackets and then install remaining six 1/4-20 x 3/4' perimeter screws and washers (fig. c items B, below). 5. Install the three-piece graphic bezel to the flanges on the monitor bracket, along with the two mending plates, using the #10-32 x 1/2" screws provided (fig. d below). 6. Hook up the AC and DVI cord connections and secure to the wire looms provided (fig. d item A, below).
fig. c fig. d
7. Install back monitor cover panel with eight 1/4-20 x 3/4” screws and flat washers after AC and DVI cables are connected (fig. e, below).
fig. e
11 | P a g e
King Kong of Skull Island™
Headset Arm Setup 1. Remove the right cover plate (fig. f item C, below). Remove the 1/2-13 x 7" bolt from the slotted hole of the bracket arm with a 3/4" socket (fig. f item A, below). 2. Rotate the arm up 90 degrees and replace the 7" bolt into the higher slotted position (make sure the bolt is snug but do not over tighten, otherwise the under-arm brackets will not fit. The arms should feel loose from side/side and up/down and not be rigid...this is a safety feature). 3. Perform the same procedure for the opposing side making sure not to over-tighten the arm pivot screws. 4. Install the under-arm brackets using the 1/4-20 x 1" screws (fig. f item B, below). 5. Install the corner cover plates on the upper left and right sides to finish off the installation of the arms (fig. f item C, below). (fig. g installation complete)
fig. f fig. g
12 | P a g e
King Kong of Skull Island™
Positioning Cabinets for Harness and Air Line Connections 1. Align the cabinets for harness and air line connections (fig. h below).
fig. h
2. From the spacer cabinet, lift up the door and prop open with the attached prop bar. 3. Route the single air line from the main cabinet thru the slot in the spacer cabinet and hook up the air line to the manifold inside the spacer cabinet (fig. i, below). 4. From the motion cabinet, pull the four air hoses and wire harness through the openings in the cabinet walls and hook up as labelled (fig. i, below).
fig. i
5. Pull out and pass the USB from the front cabinet through the motion base, spacer cabinet and plug into the front of the SERVER/Player 1 PC in the main cabinet and connect the harnessing into the appropriate mating connectors on the motion cabinet (fig. j, below).
fig. j
13 | P a g e
King Kong of Skull Island™
6. Lower the door on the spacer cabinet and install the spacer screws through the mating holes in the top of the door and tighten.
Joining the Four Cabinets Together 1. Make sure all cables, harnesses, and air lines are connected, and push the cabinets together so there is minimal space between each one. Take care to ensure that all cables, harnesses, and air lines are not pinched between the cabinets when joining. 2. Lay the right joiner beam down on the floor next to the game assembly and plug the LED light connector into the mating connector on the lower side of the front cabinet. 3. Hang the joiner beam onto the top edge of the cabinets and begin starting to thread the screws into the aligning holes and slots in the sides of all four cabinets (fig. k, below). It is recommended that you start at the motion base and work your way outwards. The cabinets should begin to straighten and align as you tighten the screws, but do not begin the final tightening of the screws until all beam screws are threaded. 4. Repeat steps 2-3 for the left joiner beam. 5. Once all of the beam screws are tightened, position the game in the desired location and lower the leg levelers to lock the game into position (fig. l, below). Be sure the jam nuts are screwed upward and tightened up to the leveler plate weld nut to prevent the leveler from disengaging the floor.
fig. k fig. l
NOTE: If the cabinet ever needs to be moved, please follow the above assembly steps in reverse order.
14 | P a g e
King Kong of Skull Island™
Card Reader Installation and Setup Due to the rising popularity of aftermarket debit card systems for cashless or coinless operation of amusement machines (i.e., Embed, Intercard, Semnox), this King Kong of Skull Island™ cabinet is equipped with UCL compatible harnessing to ensure that the installation process is easier and less prone to miswiring.
UCL, or Universal Card Link, is a debit card standard established by the American Amusement Machine Association. Visit https://coin-op.org/standardization/ for the latest UCL standard and manual information.
The UCL connections on the game use pins 1, 2, 6, 8, and 9. The other pins are unused. Each UCL connector can supply up to 1A at 12VDC.
You can choose to use 1 or 2 card readers in the pricing adjustments section of the test menu. It is recommended to use 2 card readers for best results and player access.
There are (2) supplied connections, each located under the control panel of the Front Cabinet assembly. There is enough slack to accommodate mounting (2) card readers on the front panels, as each operator desires.
If only (1) card reader will be used, it is recommended that the card reader be mounted to the center dash door, any UCL connection can be used for games equipped with only (1) card reader.
15 | P a g e
King Kong of Skull Island™
Check Electrical Settings 1. Verify the voltage in the nearest AC outlet. 2. Verify the AC outlet ground connection is present and working. Startup Game 1. Plug the two line cords into an AC outlet (Recommended: plug the line cords into separate breakers to prevent capacity overload). 2. Turn the main cabinet power switches on (there are two switches, GAME and COMPRESSOR). 3. Calibrate the headsets (pgs. 17-21) ***MACHINE IS NOT OPERATIONAL WITHOUT FIRST CALIBRATING THE HARDWARE*** 4. Verify the game and all components are operating normally. See Basic Functional Test on Initial Power Up in the Diagnostics and Adjustments section for the recommended procedure.
16 | P a g e
King Kong of Skull Island™
Headset Calibration Guide ***MACHINE IS NOT OPERATIONAL WITHOUT FIRST CALIBRATING THE HARDWARE***
1. In the test menu, select the “Calibration” menu item. (see below)
2. In the Calibration menu, select “Headset Calibration”. (see below)
17 | P a g e
King Kong of Skull Island™
3. Press Test to begin calibration. (see below)
4. Hold Player 1 headset in the player head position. (see below)
18 | P a g e
King Kong of Skull Island™
5. Press Test again to start Player 1 calibration. (see below) (IMPORTANT: MAKE SURE THE HEADSET CAMERAS ARE NOT COVERED, images a (front) & b (left and right sides) BELOW)
image a
image b
19 | P a g e
King Kong of Skull Island™
6. Then wait 20 seconds for the calibration process to initialize, during that time please make sure player 1 headset is held in player 1 head position and the headset cameras are not blocked. (see below)
7. The wizard will then instruct you to keep the headset in Player 1 head position while pressing the Test key again. (see below)
20 | P a g e
King Kong of Skull Island™
8. After pressing Test again, the wizard will instruct you to perform the same steps however this time with the player 2 headset. Hold the player 2 headset in player head position and press test, wait 20 seconds and press test again. Perform steps 5-7 with Player 2 headset.
9. Move the headsets around, to fill the bars (as seen on screen, see below). During this time, the headset calibration process captures and maps the environment using the headset cameras. The more the surrounded environment is recorded by the headset the more consistent the calibration will be. The bars fill up based on both time elapsed since calibration started and the size of the calibration file which grows depending on how much of the environment was captured. (see below)
10. Once the bars are filled, sit in the players position, and test the calibration. The headset should display a jeep and the position of the cameras for both player 1 and player 2 will show the driver side. When done, press service to exit the wizard. (see below)
21 | P a g e
King Kong of Skull Island™
Diagnostics and Adjustments
The Service Button Panel has four buttons, three of which can navigate the menu system.
Navigating the Test Menu
Button Action TEST (Not in Test Menu) Enters Test Menu TEST (In Test Menu) Selects Highlighted Option SERVICE (On Main Menu) Exits Test Menu SERVICE (Not on Main Menu) Cancels Selection VOLUME UP Move Up VOLUME DOWN Move Down Start Buttons Selects Highlighted Option
An on-screen message acknowledges changes or when you exit a selection without making a change.
22 | P a g e
King Kong of Skull Island™
Basic Functional Test on Initial Power Up 1. Enter the Input Test and verify all switch inputs are working. 2. Enter the Video Test and verify the monitors are working properly. 3. Enter the Audio Test and verify the audio works and is not distorted. 4. Enter the Cabinet Light Test and verify that all the lights are working properly. 5. Enter the Meter Test and verify the coin meter is working properly. 6. Enter the Motion Test and verify the motion platform is working properly. a. Enter the Motion Stress Test to perform a stress test of the motion platform. 7. Enter the Blower Test and verify that both air blowers are working properly. 8. Enter the Leap Motion Test and verify that the Leap Motion sensors on the headsets are working properly. 9. Enter the Watchdog Test and verify the game reboots. 10. Upon a successful reboot, you are ready to adjust pricing, volume, and other functions.
23 | P a g e
King Kong of Skull Island™
Test Menus Main Menu Choose from all available operator settings and menus here. You can use the test menu bracket and volume buttons to navigate.
MAIN MENU
DIAGNOSTICS PRICING ADJUSTMENTS GAME SETTINGS SYSTEM SETTINGS AUDITS RESETS VOLUME CALIBRATION UTILITIES SYSTEM INFORMATION
EXIT
24 | P a g e
King Kong of Skull Island™
Diagnostics Verify or diagnose the operations of all game functions. DIAGNOSTICS
INPUT TEST VIDEO TEST AUDIO TEST CABINET LIGHTS TEST METER TEST WATCHDOG TEST MOTION TEST MOTION STRESS TEST BLOWER TEST LEAP MOTION TEST WATCHDOG TEST
EXIT
• Input Test: Test input hardware such as switches. • Video Test: Checks color pattern of monitors. • Audio Test: Test audio using 100Hz and 1000Hz. • Cabinet Lights Test: Tests all LED cabinet lighting together and individually. • Meter Test: Test the functionality of the mechanical coin meter on the service button panel inside the cabinet. • Watchdog Test: Test the functionality of the watchdog reset. • Motion Test: Test the functionality of the motion platform. • Motion Stress Test: Perform a stress test of the motion platform. • Blower Test: Test the functionality of the two air blowers. • Leap Motion Test: Test the functionality of the Leap Motion controllers (mounted on headsets). • Watchdog Test: Test the functionality of the Watchdog (if successful the cabinet will power off and reboot).
25 | P a g e
King Kong of Skull Island™
Pricing and Payout Adjustments (Cash) Set pricing and payout adjustments for game operation. PRICING AND PAYOUT ADJUSTMENTS (CASH) CURRENCY INPUT CURRENCY TYPE COIN VALUE COINS TO PLAY
MAX CREDITS FREE PLAY
EXIT
• Currency Input: Change the currency input. • Currency Type: Change the currency type. • Coin Value: Change the money value of the coin. • Coins to Play: Adjust the amount of coins to start a game. • Max Credits: Adjust the maximum number of credits. • Free Play: Turn free play mode on or off.
26 | P a g e
King Kong of Skull Island™
Pricing and Payout Adjustments (Tokens) Set pricing and payout adjustments for game operation. PRICING AND PAYOUT ADJUSTMENTS (TOKENS) CURRENCY INPUT CURRENCY TYPE TOKEN VALUE TOKENS TO PLAY
MAX CREDITS FREE PLAY
EXIT
• Currency Input: Change the currency input. • Currency Type: Change the currency type. • Token Value: Change the money value of the token. • Tokens to Play: Adjust the number of tokens to start a game. • Max Credits: Adjust the maximum number of credits. • Free Play: Turn free play mode on or off.
27 | P a g e
King Kong of Skull Island™
Pricing and Payout Adjustments (Swipes) Set pricing and payout adjustments for game operation. PRICING AND PAYOUT ADJUSTMENTS (SWIPES) CURRENCY INPUT CURRENCY TYPE SWIPE VALUE (IMPORTANT SETTINGS) NUMBER OF CARD READERS
MAX CREDITS FREE PLAY
EXIT
• Currency Input: Change the currency input. • Currency Type: Change the currency type. • Swipe Value (IMPORTANT SETTING): Money value of the swipe. • Number of Card Readers: Whether players share a cashbox, or each have their own. (DBV input is disabled when set to 2.) • Max Credits: Adjust the maximum number of credits. • Free Play: Turn free play mode on or off.
28 | P a g e
King Kong of Skull Island™
Game Settings Adjust game settings for operation. GAME SETTINGS
INTERACTIVITY ENABLED CHAPTER 1 ENABLED CHAPTER 2 ENABLED CHAPTER 3 ENABLED
ATTRACT MUSIC FREQUENCY
EXIT
• Interactivity Enabled/Disabled: Enable interactive sequences and Leap Motion hands for a fully interactive experience. Disabling interactivity will allow the game to function as a “ride only” in the event of a Leap Motion failure or if the operator simply wishes to have the gameplay features turned off. • Chapter 1 Enabled: Allow the Chapter 1 level to be enabled and played. • Chapter 2 Enabled: Allow the Chapter 2 level to be enabled and played. • Chapter 3 Enabled: Allow the Chapter 3 level to be enabled and played. • Attract Music Frequency: Set how often music should be played in attract mode. (Attract mode is a pre-recorded demonstration of the gameplay that is displayed when the game is not being played. Additionally, the attract mode cycles through the title screen, epilepsy warning screen, and various hint screens).
29 | P a g e
King Kong of Skull Island™
System Settings Adjust system settings for operation. SYSTEM SETTINGS
SHOW COMPRESSOR WARNINGS SHOW LEAP MOTIONS ERRORS CABINET LED BRIGHTNESS TRADESHOW MODE DATE & TIME LANGUAGE
EXIT
• Show Compressor Warnings: Toggle whether compressor related errors will be displayed on monitors. • Show Leap Motion Errors: Toggle whether Leap Motion related errors will be displayed on monitors. • Cabinet LED Brightness: Adjust the brightness of the cabinet lighting. • Tradeshow Mode: Turn this mode on when operating on a trade show, sales, or demo floor. The game runs on free play in this mode. • Date & Time: Set date & time. • Language: Set game language (default: English).
30 | P a g e
King Kong of Skull Island™
Audits View machine statistics such as games played, money earned, etc. AUDITS
SYSTEM AUDITS COIN AUDITS GAME AUDITS
EXIT
• System Audits: Tracks system information including boots, resets, game times, and more. • Coin Audits: Tracks income related information. • Game Audits: Tracks the gameplay habits of your customers.
***Changes to pricing adjustments will reset any existing audits back to zero***
31 | P a g e
King Kong of Skull Island™
Resets Reset various machine settings and audits. RESETS
RESET CREDITS RESET PRICING ADJUSTMENTS RESET GAME ADJUSTMENTS RESET GAME AUDITS RESET SYSTEM AUDITS RESET COIN AUDITS RESET ALL AUDITS FACTORY RESTORE
EXIT
• Reset Credits: Reset credits to zero (0). • Reset Pricing Adjustments: Resets pricing to default settings. • Reset Game Adjustments: Resets game adjustments to default settings. • Reset Game Audits: Clears the game audits log file. • Reset System Audits: Clears the system audits log file. • Reset Coin Audits: Clears the coin audits log file. • Reset All Audits: Clears all audits log files. • Factory Restore: Resets system to original factory settings and defaults.
***HEADSET CALIBRATION AND PRICING ADJUSTMENTS MUST BE PERFORMED AGAIN IF THE GAME HAS BEEN RESTORED TO FACTORY SETTINGS***
32 | P a g e
King Kong of Skull Island™
Volume Adjust all volume settings. VOLUME
GAME VOLUME ATTRACT VOLUME CREDIT VOLUME MINIMUM VOLUME
EXIT
• Game Volume: Adjusts the volume level during gameplay. • Attract Volume: Adjusts the volume level during the attract mode sequences. • Credit Volume: Adjusts the volume level of the credit chime only (independent setting of game and attract volume). • Minimum Volume: Adjusts the minimum floor the volume can be lowered to.
33 | P a g e
King Kong of Skull Island™
Calibration Calibrate the VR headsets and cabinet motion.
***MACHINE IS NOT OPERATIONAL WITHOUT FIRST CALIBRATING THE HARDWARE*** CALIBRATION
HEADSET CALIBRATION HEIGHT SENSOR CALIBRATION
SERVER - MIXED REALITY CALIBRATION SIZE CLIENT - MIXED REALITY CALIBRATION SIZE
EXIT
• Headset Calibration: Calibrate tracking of both headsets.1 • Height Sensor Calibration: Calibrate the height sensors for the motion platform. • Server - Mixed Reality Calibration Size: Displays the file size of the calibration data for the Player 1 position. • Client - Mixed Reality Calibration Size: Displays the file size of the calibration data for the Player 2 position. 1 See Headset Calibration Guide, pgs. 17-21
34 | P a g e
King Kong of Skull Island™
Utilities Miscellaneous operator tools. UTILITIES
COPY AUDITS, LOGS, & SCORES TO USB VIEW GAME LOG VIEW ERROR LOG VIEW UNITY LOG TEST COINUP CONNECTION
EXIT
• Copy Audits, Logs, & Scores to USB: Copy all audits and diagnostics to USB drive. • View Game Log: Allows you to view the game log without having to save them to a USB. • View Error Log: Allows you to view the error log without having to save them to a USB. • View Unity Log: Allows you to view the Unity log without having to save them to a USB. • Test CoinUp Connection: Test connectivity between cabinet and CoinUp servers.
35 | P a g e
King Kong of Skull Island™
System Information View hardware and software information
• Serial Number • Software Rev • Build Date • RIO2 A Serial Number • RIO2 A Firmware Version • RIO2 A Primary MCU Version • RIO2 B Serial Number • RIO2 B Firmware Version • RIO2 B Primary MCU Version • P1 Dongle Version • P2 Dongle Version • Cabinet Type • Game Template There are no special menu options for this test menu entry.
36 | P a g e
King Kong of Skull Island™
Choosing the Right Pricing Adjustments for Your Location Card Swipe Locations • Make Sure Your Game is Set to Swipes Mode: 1. Hold the Test Button for 2 seconds to enter the Test Menu. 2. Select “Pricing Adjustments” from the menu. 3. Select “Currency Input” from the menu. 4. Select “Card Swipes” from the menu. 5. Exit out of “Currency Input” menu. 6. While back in “Pricing Adjustments” menu, set “Swipe Value” to the currency equivalent of your swipe, or the coin audits bookkeeping will be incorrect. THIS SETTING IS EXTREMELY IMPORTANT! (Example: If the card swipe is worth $1.50 in your card system, set the swipe value to $1.50 as well). Coin Locations • Make Sure Your Pricing & Coin Value are Correct: 1. Hold the Test Button for 2 seconds to enter the Test Menu. 2. Select “Pricing Adjustments” from the menu. 3. Select “Currency Input” from the menu. 4. Select “Cash” or “Tokens” from the menu. 5. Exit out of “Currency Input” menu. 6. While back in “Pricing Adjustments” menu a. Select “Coins to Play” and set the desired amount of coins per game of King Kong of Skull Island™. b. After setting the coins per play, set “Coin Value” to the currency equivalent of your coin, or the coin audits bookkeeping will be incorrect. THIS SETTING IS EXTREMELY IMPORTANT! (Example: If your coin is worth $0.25, set “Coin Value” to $0.25 as well).
37 | P a g e
King Kong of Skull Island™
PC Hardware
Your King Kong of Skull Island™ game uses two HP Z1G5TWR Desktop PC computers. One is the SERVER (Player 1 PC) and the other is the CLIENT (Player 2 PC).
(above: HP Z1G5TWR Desktop PC)
NOTICE WARNING: DO NOT ENTER THE BIOS SETTINGS MENU! Modifying the BIOS settings will cause your game to stop functioning. In order to boot, new security features verify the BIOS settings against factory settings, including timestamp.
38 | P a g e
King Kong of Skull Island™
PC Hard Drive Recovery Symptoms requiring a PC hard drive recovery include:
• File test reports bad or missing files. • Game fails to finish loading during setup. • After resetting the AC power, an error is reported. • Erratic Game or Attract Mode behavior. The only way to repair corrupt files is to reinstall the software as described below:
Computer
The computer contains sensitive components. Do not handle roughly. Contact your distributor before servicing its internal components. Ask about warranty information as it relates to the PC.
Do not use the PC on/off switch. Turn AC power on or off with the cabinet power switch.
Steps to Re-Install the software (the game ships with (2) USB drives, either drive can be used in the steps below):
(NO DVD Restoration. USB Thumb Drive is used on the HP Z1G5TWR)
1. With game and PC’s on, verify that both RIO2 boards has power. If not, see Troubleshooting. 2. Open the lower back door of the cabinet. 3. Insert the recovery USB thumb drive (included in your game) into an open USB port on the “SERVER PC”. 4. Plug in a USB keyboard to “SERVER PC”. 5. Turn cabinet power switch to OFF. Wait 30 seconds. 6. Turn cabinet power switch to ON, and HOLD F9 on the keyboard until the Boot Menu screen appears. 7. Use the Up and Down arrow keys to highlight “Legacy – JetFlash Mass Storage Device” and press enter. 8. Follow on screen instructions to begin recovery. 9. If recovery does not begin, check to ensure USB Drive is inserted correctly and is not damaged. 10. Initial software loading may take several minutes. Check progress periodically. Do not interrupt power or reset the game during recovery. 11. When software has been loaded, a message indicates that restore is complete. When instructed to remove USB Drive, wait 15 seconds to remove the drive from the PC. 12. Turn cabinet power switch off. 13. Repeat steps 3-12 for the “CLIENT PC”. 14. Turn the cabinet on again. 15. Your game will now be restored.
39 | P a g e
King Kong of Skull Island™
Troubleshooting Warning: Review the Safety section before making any adjustments to the game.
Problem Possible Cause Solution
Game not plugged in. Plug game into AC outlet.
Game not turned on. Turn on main power switch.
Check and replace fuse. See Specification section for Game fuse is blown. fuse values. Game will not power up. No power to receptacle. Test AC outlet and plug game into powered outlet.
PC BIOS set incorrectly. Contact your distributor.
Flash Drive Installer is left Disconnect Flash Drive Installer and power cycle the connected to PC. game.
Replace the micro switch on the button and re-test. Faulty micro switch. Verify that the wires are connected to the correct spades on the micro switch.
Disconnect the cabinet from AC power. Verify that Buttons do not work. all wires are firmly connected to each button and the PCB. Verify that no wires are frayed or Faulty wiring. improperly shorting to ground. Verify that wires are connected to the correct spades on the micro switches.
Ensure all connections to PCB are secure. Replace Faulty PCB. PCB if faulty.
To test a USB port, turn off the game, disconnect the PCB connected to faulty device from the port, and then connect the game Neither buttons nor USB port (boot message dongle to the port. Reboot the game. A No Dongle audio work. may indicate not message indicates the port is bad. If the game starts, detected) the port is working. After the test, reconnect all devices to the correct USB ports and reboot.
40 | P a g e
King Kong of Skull Island™
Problem Possible Cause Solution Bad connection. Check connection to speakers.
Volume set too low. Use VOL UP button on Test panel to raise volume
Verify all wires are firmly connected to the speakers Faulty wiring. and the audio PCB. Verify that audio PCB is connected to the computer via USB cable.
Remove the grill and inspect each speaker for visible No sound or bad damage. Run the Sound Test from System Tests in Blown speakers. sound. the Operator Menu to verify each speaker is working.
A weak or low muffled sound is a sign of reversed Reversed wires. speaker wires. Check for reversed wires on each speaker.
To verify audio is working at the computer, disconnect the USB cable coming from the audio PCB Faulty PCB. and connect stereo headphones to the green computer audio port.
Faulty power supply. Check external DC supply and the PC supply. Constant low audio hum. Check all ground wires in cabinet. Ensure AC wall Open ground. outlet is properly grounded.
USB cable disconnected. Check USB connection from PC to RIO2 board. RIO2 A or B disconnected Check for proper voltage (+5V, +12V) at RIO2 P1 No power to RIO2 board. connector. Make sure both PC’s are on and are connected to Not connected to other headsets and displays. Make sure the game runs on Game is not running on PC. both displays. both PC’s. Ethernet cable is not Connect the ethernet cable between the two connected. computers.
Compressor height No motion during Calibrate the motion platform height sensors (see sensors are not gameplay. Calibration in the Test Menu section). calibrated.
41 | P a g e
King Kong of Skull Island™
Problem Possible Cause Solution Message on screen: Disconnect and reconnect the USB cable from the Headset USB Loose or disconnected headset to the PC (must be plugged into a USB 3.0 connection not USB cable. detected. port), then reboot the cabinet.
Message on screen: Headset Display Port not detected. Loose or disconnected Disconnect and reconnect the display port cable Reconnect headset via display port cable. from the headset to the PC, then reboot the cabinet. Display Port.
Dongle missing or Message on screen: Find the dongle cable and reseat in USB port. Game dongle not disconnected. found. Please RECONNECT the game Faulty USB port. Insert dongle cable in different USB port. dongle.
Loose or disconnected Contact your distributor for service. Message on screen: RAM stick. Insufficient RAM, 16GB required. Faulty RAM stick. Contact your distributor for service.
Loose or disconnected Contact your distributor for service. Message on screen: GFX graphics card. card missing. Please RECONNECT the GFX card. Faulty graphics card. Contact your distributor for service.
Game does not load. PC Drive test reports “bad” or “missing” files. Game fails to finish loading. After resetting, game Recover hard drive. still reports an error. PC hard drive failure. See Flash Installer Document or contact your Erratic game mode or distributor for the latest software revision. attract mode. WARNING! Data files Corrupted. (Game Operation May Become Unstable.) Game Resets Bad file. Run Flash Installer.
42 | P a g e
King Kong of Skull Island™
Problem Possible Cause Solution
Turn PC power switch on. Ensure IEC cable tightly PC not turned on. plugged in. Trace cable back to source to ensure continuity.
Check and secure DVI or HDMI connector to Video cable not secure. Monitor. Check and secure DVI or HDMI connector No Video to PC.
Cabinet was powered on too quickly after a Shut off cabinet via both switches at rear of cabinet. manual shutdown/power Leave off for 30 seconds, then power back on. loss
No pulse to meter. Check wiring from meter to PCB board. Coin meter does not click during test. Faulty meter. Replace coin meter. Blown fuse(s) on PCB Replace 12vdc 5A fuse(s) on PCB. Exits Test Mode every 3 Test button stuck in ON Slide or toggle button off after Test Menu appears seconds. position. Incorrect setting in Adjust pricing settings. Pricing Adjustments.
Improper number of Disconnect cabinet from AC power. Verify wires are credits given when bills firmly connected to bill validator and ground wires are inserted. Faulty wiring. are properly connected. Verify no wires are frayed or shorting to ground.
Compressor does not turn on/low humming Compressor power cut Shut off cabinet via both switches at rear of cabinet. noise coming from the off while it was running. Leave off for 3 minutes, then power back on. compressor
43 | P a g e
King Kong of Skull Island™
Problem Possible Cause Solution
Leap is sensitive to infrared light, including sunlight, Camera captures please make sure the game is not positioned in the interferences from way of direct or reflected sunlight, and any other external sources. infrared light source. Leap Motion does not recognize fingers properly Smudge on the Leap screen is blocking the Use an alcohol-based wipe to clean the Leap front view of the Leap camera glass. cameras.
There is no positional (X,Y,Z) tracking of head movements.
Headset needs to be Please see Headset Calibration Guide, pgs. 17-21 calibrated.
The view within the headset is disoriented.
44 | P a g e
King Kong of Skull Island™
Technical Support
For an authorized distributor near you, check the Raw Thrills website at www.rawthrills.com
Betson’s Raw Thrills Technical Support Hotline Phone: 1-800-753-2513 FAX: 1-201-438-5019 Email: [email protected]
All Raw Thrills assembly and service videos:
rawthrills.com/assembly-and-service-videos/
45 | P a g e
King Kong of Skull Island™
Electrical and Mechanical Illustrations
46 | P a g e
68in 1.73m KING KONG OF SKULL ISLAND VR 12.00in RECOMMENDED 0.30m CLEARANCE AREA FOOT PRINT, SPACE AND POWER CLEARANCE FOR ENTRY AND EXIT AREA FOR REQUIREMENTS. GAME MINIMUM 10 FOOT (3 M) CEILING RECOMMENDED VENTILATION!! AND 1 FOOT (.3 M) REAR WALL CLEARANCE REQUIRED. 24.00in 0.61m
120.00in CLEARANCE MONITOR BEZEL 3.05m WITHOUT CLEARANCE 5.69in FLOOR TO MONITOR BEZEL CEILING 8.42in 0.14m HEIGHT 0.21m 60.00in 49.5in 1.52m 1.26m 97.5in 2.48m
24.00in AIR RECOMMENDED 0.61m OUT SANITARY WIPE AND WASTE BASKET LOCATION 114.17in 134.27in 2.90m 3.41m
AIR POWER REQUIREMENTS OUT
120VAC : 20A (10A per AC inlet) 230VAC : 10A (5A per AC inlet)
AIR DO NOT OVERLOAD AC MAINS IN Provide independent 20A breaker @ 120VAC Provide independent 10A breaker @ 230VAC
12.00in If a higher amperage AC circuit is provided, verify 0.30m 122.34in total load does not exceed breaker rating. REAR 3.11m VENTILATION CLEARANCE If power issues are observed (ex: spontaneous power cycle), split the two line cords between two different circuits. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
ALTERNATE TRANSFORMER 43" LCD Monitor 809-00004-01 NEMA 5-15R Female [811-00088-01] A 16W-1007-BLK #064 A AC LINE CORD 16W-1007-GRN #049 16W-1007-WHT #074
#290 14W-1015-WHT #291 PC 1 DISPLAY NEMA 5-15R Female 14W-1015-GRY AC #292 VIDEO 16W-1007-BLK #063 14W-1015-BLU 1 AC LINE CORD 16W-1007-GRN #048 #293 2 16W-1007-WHT #073 14W-1015-BRN 3 /4.F7 HDMI-DVI #898 #294 14W-1015-PUR 4 To: PC (PAGE - 4) 5 [PC 1] #295 14W-1015-WHT 6 B NEMA 5-15R Female B 14W-1015-WHT #296 7 To: HEADSET (PAGE - 4) 8 55" LCD Monitor [HEADSET 1] 16W-1007-BLK #062 #301 9 809-00012-01 /4.J5 16W-1007-GRN #047 18W-1015-GRN-YEL #297 10 16W-1007-WHT #072 11 VPM240-10400 #298 14W-1015-BLK 12 #299 14W-1015-RED 1-480708-0
ISOLATION TRANSFORMER ISOLATION NEMA 5-15R Female #300 To: HEADSET (PAGE - 4) 14W-1015-ORG [HEADSET 2] 16W-1007-BLK #061 14W-1015-YEL /4.L5 16W-1007-GRN #046 PC 2 DISPLAY 16W-1007-WHT #071 AC VIDEO C C To: PC Compartment (PAGE-2) [PSU 1] 18W-1007-BLK #105 1 1 16W-1007-BLK #060 /2.D20 18W-1007-GRN #104 2 2 16W-1007-GRN #045 18W-1007-WHT #103 3 3 16W-1007-WHT #070 /4.D7 HDMI-DVI #897 19-09-2039 19-09-1039 To: PC (PAGE - 4) [810-00304-01] [PC 2] To: PC Compartment (PAGE-2) 1 [PSU 2] 18W-1007-BLK #106 1 16W-1007-BLK #059 /2.F20 18W-1007-GRN #108 2 2 16W-1007-GRN #044 18W-1007-WHT #110 3 3 16W-1007-WHT #069 [810-00304-01] 19-09-2039 19-09-1039
D To: PC Compartment (PAGE-2) D 1 [PSU 3] 18W-1007-BLK #107 1 16W-1007-BLK #058 /2.I20 18W-1007-GRN #109 2 2 16W-1007-GRN #043 18W-1007-WHT #111 3 3 16W-1007-WHT #068 [811-00169-01] 19-09-2039 19-09-1039 DPST 16A SWITCH SWITCHED 3-350819-2 16W-1007-BLK #093 1 1 18W-1007-BLK #100 MARQUARDT AC_N 1 16W-1007-WHT #091 16W-1007-GRN #092 2 2 18W-1007-GRN #101 16W-1007-BLK #056 16W-1007-WHT #091 3 3 18W-1007-WHT #102 16W-1007-GRN #051 2 AC_N 1-480701-0 1-480700-0 16W-1007-WHT #076 UNSWITCHED 3-350819-2 1832.3312 SWITCHED 3-350819-2 IEC320 C-13 AC_L 3 16W-1007-BLK #093 E To PCs E AC_L 4 #049 16W-1007-BLK #055 #058 #059 #060 #061 #062 #063 #064 #043 #044 #045 #046 #047 #048 #068 #069 #070 #071 #072 #073 #074 UNSWITCHED 3-350819-2
[811-00154-01] 5-15R Female NEMA 16W-1007-GRN #050
#094 16W-1007-WHT #075 #055 #056 #050 #051 #075 #076 16W-1007-GRN 16W-1007-BLK 16W-1007-BLK 16W-1007-BLK 16W-1007-BLK 16W-1007-BLK 16W-1007-BLK 16W-1007-BLK 16W-1007-GRN 16W-1007-GRN 16W-1007-GRN 16W-1007-GRN 16W-1007-GRN 16W-1007-GRN 16W-1007-WHT 16W-1007-WHT 16W-1007-WHT 16W-1007-WHT 16W-1007-WHT 16W-1007-WHT 16W-1007-WHT 15A BREAKER [811-00153-01] 52949-1 52949-1 FUSED #090 #092 SCHURTER 16W-1007-BLK AC_L 1 3 4 16W-1007-BLK 16W-1007-BLK 16W-1007-GRN 16W-1007-GRN F T9-611P-15 3-350819-2 16W-1007-WHT 16W-1007-WHT F 2 AC_L AC_L AC_L 2 3 4 2 3 4 2 3 4 UNFUSED 3-350819-2 1 1 1 1 AC LINE CORD
#095 773-164 773-164 773-164 773-108 773-108 773-108 16W-1007-GRN 16W-1007-WHT AC_L AC_EARTH AC_N AC_L AC_EARTH AC_N MAC210Q COMPRESSOR #054 AC Relay 25A 6225AXXZSZ-DC3 10A/250VAC 16W-1007-WHT #066 AC_RELAY_LO AC_RELAY_HI C14 RECEPTACLE 16W-1007-BLK 1 2 QUALTEK AC_L 1 AC Relay 25A 2-32952-1 #057 #042 3-350819-2 From: PC Compartment (PAGE-2) 6225AXXZSZ-DC3 #067
703W-00/08 16W-1007-BLK [AC RELAY] 16W-1007-GRN #041 G AC_N 2 52949-1 52949-1 G 1 3 3-350819-2 /2.I13 22W-1007-GRN-PUR #211 AC_RELAY_LO AC_L 52949-1 52949-1
AC_EARTH 3 16W-1007-GRN #089 #389 #388 2-32952-1 22W-1007-GRN-RED #210 2 AC_RELAY_HI AC_L 4 16W-1007-BLK #053 3-350819-2 52949-1 52949-1 16W-1007-WHT 16W-1007-BLK
AC_EARTH 16W-1007-GRN GROUNDING STUD [811-00091-01] 2 3 4 2 3 4 2 3 4 1 1 1
773-164 773-164 773-164 AC_L AC_EARTH AC_N #052 #040 #065 22W-1061-GRN-RED 22W-1061-GRN-PUR H From: Compressor Compartment (PAGE-3) H [Compressor AC Relay] /3.H20 [811-00162-01] 16W-1007-BLK 16W-1007-GRN 16W-1007-WHT
[811-00087-01] [811-00089-01] [811-00155-01] I I #052 #040 #065
DPST 16A SWITCH SWITCHED 3-350819-2 16W-1007-BLK #005 1 1 16W-1007-BLK #030 16W-1007-BLK #031 1 1 16W-1007-BLK #035 MARQUARDT AC_N 1 16W-1007-WHT #002 16W-1007-GRN #007 2 2 16W-1007-GRN #032 16W-1007-GRN #033 2 2 16W-1007-GRN #034 16W-1007-WHT #002 3 3 16W-1007-WHT #028 16W-1007-WHT #029 3 3 16W-1007-WHT #036 2 AC_N 1-480701-0 1-480700-0 1-480701-0 1-480700-0
UNSWITCHED 16W-1007-BLK 16W-1007-GRN
3-350819-2 16W-1007-WHT 1832.3312
SWITCHED 3-350819-2 #030 #028 #032 #033 #029 #031 1 2 3
1-480700-0 [811-00086-01] AC_L 3 16W-1007-BLK #005 1 AC_L 4 [811-00156-01] 2 3 UNSWITCHED J 3-350819-2 J #003 [811-00152-01] 1-480701-0 16W-1007-BLK 16W-1007-BLK 16W-1007-GRN 16W-1007-GRN 16W-1007-WHT 16W-1007-WHT #038 #039 #037
773-164 773-164 773-164 773-164
15A BREAKER 773-164 AC LINE FILTER FUSED #001 #007 SCHURTER 16W-1007-BLK 1 CORCOM 16W-1007-BLK
AC_L 16W-1007-GRN 15EMC1 16W-1007-WHT T9-611P-15 3-350819-2 #019 #022 #020 #021 #023 #024 #026 #025 #027 AC_L 2 16W-1007-BLK #035 1 4 AC_L AC_L 1 1 16W-1007-BLK #038 UNFUSED 3-350819-2 1 3-350819-2 3-350819-2
K #004 #008 K
16W-1007-GRN 2 16W-1007-WHT 14W-1015-WHT 16W-1007-WHT #036 1 5 AC_N AC_N 2 1 16W-1007-WHT #037 #009 14W-1015-BLU 3-350819-2 3-350819-2 3 1 #010 1 16W-1007-WHT #019 14W-1015-YEL 2 2 16W-1007-YEL
4 16W-1007-BLU 6 3
16W-1007-BLK AC_EARTH 16W-1007-BRN 16W-1007-RED AC_EARTH 16W-1007-PUR 1
16W-1007-ORG 16W-1007-GRN #034 16W-1007-GRN #039 #011 14W-1015-ORG 3 3 16W-1007-BLU #020 16W-1007-WHT 3-350819-2 2-32952-1 5 4 4 16W-1007-BRN #022 10A/250VAC #012 14W-1015-BLK 5 5 16W-1007-PUR #021 16W-1007-GRN-YEL C14 RECEPTACLE 6 16W-1007-BLK #013 14W-1015-RED 6 6 QUALTEK AC_L 1
2-32952-1 7 7 3-350819-2 703W-00/08 #014 8 8 16W-1007-GRN-YEL #023 7 14W-1015-PUR 9 9 16W-1007-BLK #024 AC_N 2 #015 F Designed: Date: REV 8 14W-1015-BRN 10 10 16W-1007-RED #025 ANSI D 3-350819-2 920.1202 TOROID JTN 2020.12.30 A #016 11 11 16W-1007-ORG #026 E 9 14W-1015-RED #017 3 12 12 16W-1007-YEL #027 TITLE L AC_EARTH 16W-1007-GRN #006 ISOLATION TRANSFORMER D L 2-32952-1 14W-1015-ORG #018 1-480708-0 1-480709-0 Raw Thrills, Inc. VR System Diagram 3-350819-2 10 C AC_EARTH 14W-1015-YEL 5441 Fargo Ave. rawthrills.com AC 11 GROUNDING STUD B Skokie, IL 60077 tel: 847.679.8373 DWG USA fax: 847.679.8538 INITIAL JTN 2020.12.30 A SHEET SHEETS DESCRIPTION BY DATE REV 1 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 , 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
[500-00205-01] /3.M8 2-520181-2 /4.H19 Main Harness: 22W-1061-BLK-BLU #218 1 1 22W-1007-BLK-BLU #284 22W-1007-BLK-BLU #284 1 1 TEST 2 2 [811-00091-01] A 22W-1007-BLK #288 1 2 GND A 22W-1007-BLK, #213,#214 3 3 22W-1007-BLK #288 18W-1007-ORG-RED #198 1 1 22W-1007-RED #085 22W-1007-RED #085 1 12V_F8 22W-1061-PUR-WHT #219 4 4 22W-1007-PUR-WHT #285 22W-1007-PUR-WHT #285 1 3 SERVICE 22W-1007-YEL-RED #270 2 2 22W-1007-WHT #086 22W-1007-WHT #086 2 T-MOLD RIGHT - RED 22W-1007-BLK #214 5 5 22W-1007-BLK #289 2-520181-2 03-06-2023 03-06-1023 22W-1061-RED-PNK #220 6 6 22W-1007-ORG-GRN #286 22W-1007-ORG-GRN #286 1 4 VOLUME UP 22W-1061-RED-PUR #221 7 7 22W-1007-ORG-RED #287 500-00205-01
8 8 22W-1007-BLK #289 1 5 GND WHITE PUCKLIGHT To: Monitor Cabinet Top (4) Monitor Cabinet Top To: 9 9 Monitor Cabinet Mid (3) To: [Monitor Cab Top Connections] [Monitor Cab Top 22W-1007-ORG-RED #287 1 6 VOLUME DOWN [Monitor Cab Mid Connections]
03-09-1094 03-09-2094 2-520181-2 AS-1870 7 TEST BRACKET
8
B 9 B [810-00015-01] [811-00105-01] 12V_F1 18W-1007-ORG-BLK #186 1 1 12V_F1 12VDC 2 1 18W-1007-ORG #136 5A/250V,3AG,FAST 2-520181-2 0312005.MXP 2-520181-2 12V_F2 600W 12VDC PSU 1 2 1 4 18W-1007-ORG-BLU, #187,#188 1 12V_F2 12VDC 1 18W-1007-ORG #137 18W-1007-ORG, #136,#137 1 18W-1007-ORG, #122,#128 18W-1007-ORG #122 12VDC 5A/250V,3AG,FAST 52949-1 MEANWELL 3-520150-2 0312005.MXP 2-520181-2 18W-1007-ORG, #138,#139 2 2 18W-1007-ORG #128 12V_F3 18W-1007-ORG, #140,#141 3 3 18W-1007-ORG, #123,#129 18W-1007-ORG #123 5 12VDC 1 2 HRP-600-12 18W-1007-ORG-BRN, #189,#191 1 12V_F3 12VDC 1 18W-1007-ORG #138 52949-1 5A/250V,3AG,FAST 18W-1007-ORG, #142,#143 4 4 18W-1007-ORG #129 3-520150-2 0312005.MXP 2-520181-2 12V_F4 18W-1007-ORG, #144,#145 5 5 18W-1007-ORG #124 18W-1007-ORG #124 6 12VDC
1 2 52949-1 18W-1007-ORG-GRN, #192,#193 1 12V_F4 12VDC 1 18W-1007-ORG #139 18W-1007-BLK, #156,#157 6 6 18W-1007-BLK, #119,#134 5A/250V,3AG,FAST From: AC (1) 3-520150-2 0312005.MXP 2-520181-2 18W-1007-BLK, #158,#159 7 7 18W-1007-BLK #134 18W-1007-BLK #119 7 GND AC_L 1 18W-1007-BLK #105 12V_F5 #274 18W-1007-BLK, #160,#161 8 8 18W-1007-BLK, #120,#135 52949-1 52949-1 [PSU 1] C 18W-1007-ORG-GRY #194 1 1 12V_F5 12VDC 2 1 18W-1007-ORG #140 C #231 #232 #233 #234 #235 #236 #237 #238 #239 #240 #241 #242 #244 #245 #246 #247 #248 #249 #250 #225 #226 #227 #228 #229 #230 5A/250V,3AG,FAST 18W-1007-BLK, #162,#163 9 9 18W-1007-BLK #135 18W-1007-BLK #120 8 GND AC_N 2 18W-1007-WHT #103 /1.D12 2-520181-2 0312005.MXP 2-520181-2 12V_F6 18W-1007-BLK, #164,#165 10 10 18W-1007-BLK #121 52949-1 52949-1 18W-1007-ORG-PNK #195 1 1 12V_F6 12VDC 2 1 18W-1007-ORG #141 9 GND AC_EARTH 3 5A/250V,3AG,FAST 39-01-3103 39-01-2100 18W-1007-BLK #121 18W-1007-GRN #104 2-520181-2 0312005.MXP 2-520181-2 52949-1 52949-1 12V_F7 [810-00304-01] 18W-1007-ORG-PUR #196 1 1 12V_F7 12VDC 2 1 18W-1007-ORG #142 5A/250V,3AG,FAST 2-520181-2 0312005.MXP 2-520181-2 12V_F8 18W-1007-ORG-RED, #198,#197 1 1 12V_F8 12VDC 2 1 18W-1007-ORG #143 5A/250V,3AG,FAST 0312005.MXP
18W-1007-GRN-YEL 3-520150-2 2-520181-2 12V_F9 22W-1007-PNK-BLU 22W-1007-BLK-BRN 22W-1007-BRN-BLU 22W-1007-BLK-PNK 22W-1007-BLK-PUR 22W-1007-BLU-PNK 22W-1007-BLU-PUR 22W-1007-PNK-BLK 22W-1007-GRY-BLU 22W-1007-PNK-RED 22W-1007-PUR-RED 22W-1007-BLK-GRN 22W-1007-BRN-RED 18W-1007-GRN-BLU 22W-1007-BLK-GRY 22W-1007-BLK-ORG 22W-1007-BLU-WHT 22W-1007-GRY-RED 22W-1007-PNK-GRN
22W-1007-BRN-GRN 22W-1007-PNK-ORG 22W-1007-PNK-GRY 1 2
22W-1007-GRY-GRN 12V_F9 12VDC 18W-1007-GRN-ORG 18W-1007-GRN-GRY
2-32952-1 18W-1007-ORG-WHT #199 1 1 18W-1007-ORG #144 5A/250V,3AG,FAST 2-520181-2 0312005.MXP 2-520181-2 12V_F10
1 2 1 1
2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 12V_F10 12VDC 21 11 20 22 10 12 13 14 15 16 17 18 19 10 22W-1007-ORG-YEL, #200,#201 1 1 18W-1007-ORG #145 39-01-2220 39-01-2100 5A/250V,3AG,FAST 2-520181-2 0312005.MXP 2-520181-2 -P8 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9
D 22 D 10 21 11 20 10 12 13 14 15 16 17 18 19 -P7 22W-1007-PUR-GRN #251 1 1 ARM RIGHT - GRN -P2 22W-1007-PUR-BLU #252 2 2 ARM RIGHT - BLU 22W-1007-WHT-RED #253 3 3 T-MOLD LEFT - RED 12V_F11 [811-00105-01] 22W-1007-WHT-GRN #254 4 4 T-MOLD LEFT - GRN 18W-1007-ORG-BLK #176 1 1 12V_F11 12VDC 2 1 18W-1007-ORG #146 22W-1007-WHT-BLU #255 5 5 5A/250V,3AG,FAST T-MOLD LEFT - BLU 2-520181-2 0312005.MXP 2-520181-2 22W-1007-YEL-RED #256 6 6 T-MOLD RIGHT - RED 12V_F12 1 12V_F12 12VDC 2
RESERVED-1 1 1 RESERVED-2 RESERVED-3 18W-1007-ORG-BLU #177 18W-1007-ORG #147 22W-1007-YEL-GRN #258 7 7 T-MOLD RIGHT - GRN 5A/250V,3AG,FAST 600W 12VDC PSU 0312005.MXP 18W-1007-ORG, #146,#147 1 1 18W-1007-ORG, #125,#130 18W-1007-ORG #125 4 12VDC
8 1 SOLENOID UP 2-520181-2 2-520181-2 22W-1007-YEL-BLU #259 8 T-MOLD RIGHT - BLU 0 SOLENOID UP 2 SOLENOID UP 3 SOLENOID UP MID RGBS - BLU ARM LEFT - BLU 12V_F13 52949-1 MID RGBS - RED
ARM LEFT - RED MEANWELL MID RGBS - GRN ARM LEFT - GRN 18W-1007-ORG, #148,#149 2 2 18W-1007-ORG #130 -P1 1 2 22W-1007-BLU-RED #260 9 9 ARM RIGHT - RED 12V_F13 12VDC UPPER SHAPE LEFT - RED 18W-1007-ORG-BRN #178 1 1 18W-1007-ORG #148 5 SOLENOID DOWN 1 5A/250V,3AG,FAST 3 3 12VDC SOLENOID DOWN 0 SOLENOID DOWN 2 SOLENOID DOWN 3 SUBWOOFER - BLU 18W-1007-ORG, #150,#151 18W-1007-ORG, #126,#131 18W-1007-ORG #126 UPPER RGBS - BLU SUBWOOFER - RED UPPER RGBS - RED SUBWOOFER - GRN 22W-1007-BLU-GRN #261 10 10 UPPER SHAPE LEFT - GRN UPPER RGBS - GRN 1 1 0312005.MXP HRP-600-12 12V_F7 18W-1007-ORG-PUR #196 2-520181-2 2-520181-2 4 4 52949-1 COMPRESSOR DRAIN 12V_F14 18W-1007-ORG, #152,#153 18W-1007-ORG #131 22W-1007-BLU-BRN #263 11 11 UPPER SHAPE LEFT - BLU 2 2 22W-1007-RED #209 5V 18W-1007-ORG-GRN #179 1 1 12V_F14 12VDC 2 1 18W-1007-ORG #149 18W-1007-ORG, #154,#155 5 5 18W-1007-ORG #127 18W-1007-ORG #127 6 12VDC 22W-1007-RED-ORG #264 12 12 UPPER SHAPE RIGHT - RED 3 3 5A/250V,3AG,FAST 52949-1 2-520181-2 0312005.MXP 2-520181-2 18W-1007-BLK, #166,#167 6 6 18W-1007-BLK, #116,#132 22W-1007-RED-GRN #265 13 13 UPPER SHAPE RIGHT - GRN 4 22W-1007-GRN-RED #210 12V_F15 From: AC (1) AC_RELAY_HI 4 18W-1007-BLK, #168,#169 7 7 18W-1007-BLK #132 18W-1007-BLK #116 7 GND AC_L 1 18W-1007-BLK #106 E 22W-1007-RED-BLU #266 14 14 UPPER SHAPE RIGHT - BLU 5 5 22W-1007-GRN-PUR #211 18W-1007-ORG-GRY #180 1 1 12V_F15 12VDC 2 1 18W-1007-ORG #150 E AC_RELAY_LO 5A/250V,3AG,FAST 18W-1007-BLK, #170,#171 8 8 18W-1007-BLK, #117,#133 52949-1 52949-1 [PSU 2] 22W-1007-BLU-ORG #267 15 15 LOWER SHAPE LEFT - RED 6 18W-1007-BLK #156 2-520181-2 0312005.MXP 2-520181-2 GND 6 12V_F16 18W-1007-BLK, #172,#173 9 9 18W-1007-BLK #133 18W-1007-BLK #117 8 GND AC_N 2 18W-1007-WHT #110 22W-1007-BLU-GRY #268 16 16 /1.E12 LOWER SHAPE LEFT - GRN GND 7 7 18W-1007-BLK #157 18W-1007-ORG-PNK #181 1 1 12V_F16 12VDC 2 1 18W-1007-ORG #151 52949-1 52949-1 5A/250V,3AG,FAST 18W-1007-BLK, #174,#175 10 10 18W-1007-BLK #118 22W-1007-BLU-BLK #269 17 17 LOWER SHAPE LEFT - BLU 0312005.MXP GND 8 8 18W-1007-BLK #158 2-520181-2 2-520181-2 9 3 12V_F17 39-01-3103 39-01-2100 18W-1007-BLK #118 GND AC_EARTH 18W-1007-GRN #108 22W-1007-BRN-ORG #271 18 18 LOWER SHAPE RIGHT - RED GND 9 9 18W-1007-BLK #159 52949-1 52949-1 19 18W-1007-ORG-PUR #182 1 1 12V_F17 12VDC 2 1 18W-1007-ORG #152 22W-1007-BRN-GRY #272 19 LOWER SHAPE RIGHT - GRN GND 10 10 18W-1007-BLK #160 5A/250V,3AG,FAST [810-00304-01] 2-520181-2 0312005.MXP 2-520181-2 22W-1007-BRN-BLK #273 20 20 LOWER SHAPE RIGHT - BLU GND 11 11 18W-1007-BLK #161 12V_F18 39-01-2200 GND 12 12 18W-1007-BLK #162 18W-1007-ORG-RED #183 1 1 12V_F18 12VDC 2 1 18W-1007-ORG #153 -P6 500-00199-05 5A/250V,3AG,FAST 13 13 2-520181-2 0312005.MXP 2-520181-2 12V_F19 1 14 14 [RIO2] 18W-1007-ORG-WHT #184 1 1 12V_F19 12VDC 2 1 18W-1007-ORG #154 2 15 15 5A/250V,3AG,FAST 2-520181-2 0312005.MXP 2-520181-2 3 GND 16 16 18W-1007-BLK #163 12V_F20 4 18W-1007-ORG-YEL #185 1 1 12V_F20 12VDC 2 1 18W-1007-ORG #155 GND 17 17 22W-1007-BLK #212 5A/250V,3AG,FAST 0312005.MXP 5 GND 18 18 22W-1007-BLK #213 2-520181-2 2-520181-2 F 6 GND 19 19 18W-1007-BLK #215 F 7 GND 20 20 22W-1007-BLK #216 8 GND 21 21 22W-1061-BLK #217 9 22 22 10 23 23 [811-00158-01] 11 24 24 12 39-01-2240 13 52949-1 320W 15VDC PSU 14 [811-00159-01] 18W-1007-PUR #112 1 12VDC 15 MEAN WELL 2 1 18W-1007-PUR #113 12VDC 16 15V_F1 18W-1007-YEL #202 1 18W-1007-PUR #112 52949-1 3 RSP-320-15 18W-1007-YEL #204 1 1 15V_F1 12VDC 2 1 18W-1007-YEL #202 18W-1007-YEL #203 2 2 18W-1007-PUR #113 12VDC 5A/250V,3AG,FAST 52949-1 2-520181-2 0312005.MXP 2-520181-2 18W-1007-BLK-YEL #206 3 3 18W-1007-BLK #114 18W-1007-BLK #114 4 GND 15V_F2 CAN - LO VOLUME DOWN VOLUME UP TEST SERVICE SWITCH 1 SAFETY SWITCH 2 SAFTEY GND CAN - HI PRESSURE SENSOR 18W-1007-BLK-YEL #207 4 4 18W-1007-BLK #115 5 USB 8 18W-1007-YEL #205 1 1 15V_f2 12VDC 2 1 18W-1007-YEL #203 18W-1007-BLK #115 GND REAR RIO2 5A/250V,3AG,FAST 52949-1 0312005.MXP 2 3 4 5 6 7 8 9 6 G 1 39-01-3043 39-01-2040 G 21 31 11 20 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37
10 12 13 14 15 16 17 18 19 GND
38 2-520181-2 2-520181-2 -P4 52949-1 18W-1007-GRN #109 7 AC_EARTH 1 2 3 4 5 6 7 8 9 21 31 11 20 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 10 12 13 14 15 16 17 18 19 18W-1007-WHT #111 8 AC_N 18W-1007-BLK #107 9 AC_L 52949-1 51353-3800 RED BLK #218 #219 #221 #220 #222 #223 #224 #217 CBL1 CBL1
H H /1.E12 22W-1061-BLK From: AC (1) [PSU 3] 22W-1061-BLK-BLU 22W-1061-BLK-RED 22W-1061-RED-PUR 22W-1061-RED-PNK 22W-1061-BLK-WHT 22W-1061-PUR-WHT 22W-1061-PNK-WHT To: AC (PAGE-1) [AC RELAY] [811-00169-01] /1.H10
I I /3.I18
#204 #205 #206 #207 To: Mid Monitor Cab (PAGE-3) [811-00120-01] [Compressor Monitor] RED RED RED BLK BLK BLK RED RED RED RED BLK BLK BLK BLK
RGB LED Strip 1 1 22W-1007-WHT #276 + 12VDC [500-00131-01]
CBL2 CBL3 CBL4 CBL2 CBL3 CBL4 CBL5 CBL6 CBL7 CBL8 CBL5 CBL6 CBL7 CBL8 18W-1007-ORG-BRN #191 22W-1007-WHT #276 22W-1007-WHT-RED #253 2 2 22W-1007-RED #278 22W-1007-RED #278 R T-MOLD LEFT - RED 18W-1007-YEL 18W-1007-YEL 22W-1007-WHT-GRN #254 3 3 22W-1007-GRN #280 22W-1007-GRN #280 G T-MOLD LEFT - GRN 22W-1007-WHT-BLU #255 4 4 22W-1007-BLU #282 22W-1007-BLU #282 B T-MOLD LEFT - BLU 18W-1007-BLK-YEL 18W-1007-BLK-YEL 03-06-1042 03-06-2042 1 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 2 3 4 11 11 10 12 13 14 10 12 13 14
J 39-01-2140 39-01-2140 39-01-2040 J 1 1 1 4 4 4 2 3 5 6 7 8 9 2 3 5 6 7 8 9 2 3 14 14 11 11 10 12 13 10 12 13 RGB LED Strip 18W-1007-ORG-GRY #194 1 1 22W-1007-WHT #277 22W-1007-WHT #277 + 12VDC [500-00131-01] GND GND 22W-1007-BLU-ORG #267 2 2 22W-1007-RED #279 22W-1007-RED #279 R LOWER SHAPE LEFT - RED 15V_f2 15V_F1 22W-1007-BLU-GRY #268 3 3 22W-1007-GRN #281 22W-1007-GRN #281 G LOWER SHAPE LEFT - GRN 22W-1007-BLU-BLK #269 4 4 22W-1007-BLU #283 22W-1007-BLU #283 B LOWER SHAPE LEFT - BLU FRONT LT - FRONT LT FRONT RT - FRONT LT + FRONT LT FRONT RT + 03-06-1042 03-06-2042 P1 SEAT SUB - P1 SEAT SUB - P2 SEAT SUBWOOFER - P1 SEAT SUB + P1 SEAT SUB + P2 SEAT SUBWOOFER + SEAT SPEAKER LT - SPEAKER LT SEAT SEAT SPEAKER RT - SEAT SEAT SPEAKER LT + SPEAKER LT SEAT SEAT SPEAKER RT + SEAT [811-00110-01] K K
[380-00010-01] AUDIO 5.1 Audio Amp
[Front Power] F Designed: Date: REV [Audio & Earth] 2020.12.30 ANSI D [Spacer Pedestal] E JTN A
/6.I20 TITLE /5.L19
L /6.G20 D L
To: Space Pedestal (PAGE-6) To: Raw Thrills, Inc. VR System Diagram USB 7
To: Front Lower Cabnet (PAGE-7) To: C From: PC (PAGE-4) Front Lower Cabinet (PAGE-7) To: 5441 Fargo Ave. rawthrills.com PC Compartment B Skokie, IL 60077 tel: 847.679.8373 [MONITOR CAB I/O] DWG USA fax: 847.679.8538 /4.F1 INITIAL JTN 2020.12.30 A SHEET SHEETS DESCRIPTION BY DATE REV 2 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
[811-00163-01] [811-00163-01]
22W-1007-YEL #391 1 1 22W-1061-ORG-WHT #373 22W-1061-ORG-WHT #374 1 1 22W-1007-YEL #392 22W-1007-BLK #397 2 2 22W-1061-BLK #377 22W-1061-BLK #378 2 2 22W-1007-BLK #395 A 22W-1007-GRN #399 3 3 22W-1061-BLU-WHT #382 22W-1061-BRN-WHT #386 3 3 22W-1007-GRN #400 A 22W-1007-BLU #539 4 4 22W-1061-BLU-YEL #383 22W-1061-BRN-YEL #387 4 4 22W-1007-BLU #402 39-01-2040 39-01-3043 39-01-3043 39-01-2040 #391 #397 #399 #539 #392 #395 #400 #402 #306 #320 #321 #322 #308 #326 #304 #323 #324 #325 #307 #327 #303 #312 #314 #316 22W-1007-YEL 22W-1007-YEL 22W-1007-BLU 22W-1007-BLU 22W-1007-BLK 22W-1007-BLK B 22W-1007-GRN 22W-1007-GRN B 1 2 3 4 1 2 3 4 22W-1007-YEL-BLU 22W-1007-YEL-RED 22W-1007-YEL-RED 22W-1007-BLK-BRN 22W-1007-BRN-BLU 22W-1007-YEL-GRN 22W-1007-BRN-BLK 22W-1007-ORG-YEL 22W-1007-BRN-RED 22W-1007-BRN-GRN 22W-1007-BRN-ORG 22W-1007-BRN-GRY 22W-1007-ORG-BRN 22W-1007-ORG-RED 22W-1007-ORG-BRN 18W-1007-ORG-PNK 03-06-2042 39-01-3023 1 1 1 1 1 2 3 4 2 2 3 4 2 2 3 4 03-06-1042 03-06-2023 03-06-1042 12VDC FAN 12VDC FAN AUB1212H-CK15 AUB1212H-CK15 1 1 1 1 1 2 3 4 2 2 3 4 2 2 3 4 [811-00164-01] [811-00163-01] 39-01-2020 03-06-2042 03-06-1023 03-06-2042
C 03-06-1042 C #360 #361 #333 #338 #349 #354 #331 #339 #347 #355
#334,#335 #336,#337 #350,#351 #352,#353 22W-1007-YEL #390 1 1 22W-1061-ORG-WHT #372 22W-1061-ORG-WHT #375 1 1 22W-1007-YEL #393 22W-1007-BLK #396 2 2 22W-1061-BLK #376 22W-1061-BLK #379 2 2 22W-1007-BLK #394 22W-1007-GRN #398 3 3 22W-1061-BLU-PNK #380 22W-1061-BRN-PNK #384 3 3 22W-1007-GRN #401 4 4 4 4 22W-1007-RED 22W-1007-WHT 22W-1007-BLU #404 22W-1061-BLU-PUR #381 22W-1061-BRN-PUR #385 22W-1007-BLU #403 [811-00110-01] [810-00480-01]
[811-00114-01] [500-00205-01] 39-01-2040 39-01-3043 39-01-3043 39-01-2040 #087 #088 22W-1007-BLU 22W-1007-BLU 22W-1007-BLK 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-GRN 22W-1007-GRN 22W-1007-WHT 22W-1007-WHT 22W-1007-BLU, 22W-1007-RED, 22W-1007-GRN, 22W-1007-WHT,
RGB LED Strip #390 #396 #398 #404 #393 #394 #401 #403 22W-1007-WHT #331 + 12V_F3 + 22W-1007-WHT #332 22W-1007-RED #339 R MID RGBS - RED R 22W-1007-RED #340 D 22W-1007-GRN #347 G MID RGBS - GRN G 22W-1007-GRN #348 D 22W-1007-BLU #355 B MID RGBS - BLU B 22W-1007-BLU #356 #334 #336 #350 #352 #335 #337 #351 #353 22W-1007-YEL 22W-1007-YEL 22W-1007-BLU 22W-1007-BLU 22W-1007-BLK 22W-1007-BLK 22W-1007-GRN 22W-1007-GRN 1 2 3 4 1 2 3 4 #360 #361 #333 #338 #349 #354 RGB LED Strip [811-00162-01] 12V_F3 + 22W-1007-WHT #332 22W-1007-BLU 22W-1007-BLU 22W-1007-RED 22W-1007-RED
22W-1007-GRN 22W-1007-GRN MID RGBS - RED R 22W-1007-RED #340 22W-1007-WHT 22W-1007-WHT
22W-1007-RED 22W-1007-WHT MID RGBS - GRN G 22W-1007-GRN #348 + + G G R B R B MID RGBS - BLU B 22W-1007-BLU #356 12VDC FAN 12VDC FAN
#087 AUB1212H-CK15 AUB1212H-CK15 #088 22W-1007-BLU 22W-1007-BLK 22W-1007-RED 22W-1007-RED 22W-1007-GRN 22W-1007-WHT E [811-00163-01] E 12V_F6 12V_F6 + 1 2 1 2 G R B 12V_F3 12V_F8 12V_F10
12V_F9 1 22W-1061-ORG-WHT #372 12V_F9 2 22W-1061-ORG-WHT #373 12V_F9 3 22W-1061-ORG-WHT #374 LOWER SHAPE RIGHT - BLU LOWER SHAPE RIGHT - BLU LOWER SHAPE RIGHT - RED LOWER SHAPE RIGHT - RED LOWER SHAPE RIGHT - GRN LOWER SHAPE RIGHT - GRN 12V_F9 4 22W-1061-ORG-WHT #375 T-MOLD RIGHT - BLU T-MOLD T-MOLD RIGHT - RED T-MOLD T-MOLD RIGHT - GRN T-MOLD
T-MOLD RIGHT - RED T-MOLD 5 COMPRESSOR DRAIN GND 22W-1061-BLK #376 RGB LED Strip RGB LED Strip
Segments: GND 6 22W-1061-BLK #377 F 1 GND 7 22W-1061-BLK #378 F GND 8 22W-1061-BLK #379 AB21-02-2-DC12V 500-00205-01 FAN0_TACH 9 22W-1061-BLU-PNK #380
Drain Valve RGB LED Strip WHITE PUCKLIGHT FAN0_PWM 10 22W-1061-BLU-PUR #381 1 FAN1_TACH 11 22W-1061-BLU-WHT #382 22W-1007-ORG-WHT #368 2 12V_F9 FAN1_PWM 12 22W-1061-BLU-YEL #383 3 FAN2_TACH 13 22W-1061-BRN-PNK #384 22W-1007-ORG-WHT #369 4 12V_F9 FAN2_PWM 14 22W-1061-BRN-PUR #385 5 FAN3_TACH 15 22W-1061-BRN-WHT #386 22W-1007-BLK #370 6 GND FAN3_PWM 16 22W-1061-BRN-YEL #387 CBL11 BLK 7 CAN - LO 17 22W-1007-BLK #371 8 GND 18 CBL11 RED 9 CAN - HI 19 10 20 G 21 G [811-00092-01] 51353-1000 22 23 24 25 AC_RELAY_HI 26 22W-1061-GRN-RED #388 AC_RELAY_LO 27 22W-1061-GRN-PUR #389 28 29
30 /1.I6 To: AC (PAGE-1) To: 31
[500-00253-01 32 AC Relay] [Compressor Compressor Monitor 51353-3200 H RGB LED Strip H 22W-1007-WHT #329 + 12V_F3 + 22W-1007-WHT #330 22W-1007-RED #341 R MID RGBS - RED R 22W-1007-RED #342 22W-1007-GRN #345 G MID RGBS - GRN G 22W-1007-GRN #346 [811-00091-01] 22W-1007-BLU #357 B MID RGBS - BLU B 22W-1007-BLU #358 22W-1007-ORG-WHT, #368,#369 1 1 18W-1007-ORG-WHT #199 22W-1007-BLK, #370,#371 2 2 18W-1007-BLK #215 /2.J11 CBL11 RED 3 3 CBL1 RED From: PC Compartment (PAGE-2) CBL11 BLK 4 4 CBL1 BLK [Compressor Monitor] 39-01-2040 39-01-3043 #329 #341 #345 #357 [811-00157-01] RGB LED Strip 12V_F3 + 22W-1007-WHT #330 RED BLK RED BLK #305 #317 #318 #319 #302,#303 #304 #305 #306 #307,#362 #308 #309 #311,#312 #313,#314 #316,#315 #317 #318 #319 #320 #321 #322 #323 #324 #325 #326 #327 MID RGBS - RED R 22W-1007-RED #342 SPEAKER I MID RGBS - GRN G 22W-1007-GRN #346 I CBL9 CBL9 CBL9 CBL9 MID RGBS - BLU B 22W-1007-BLU #358 [810-00046-01] 22W-1007-BLU 22W-1007-RED 22W-1007-GRN 22W-1007-WHT 22W-1007-BLK
03-06-2042 1 1 2 3 4 [811-00164-01] 22W-1007-RED #364 12V_F8 22W-1007-ORG-RED #363 1 1 22W-1007-RED #364 22W-1007-YEL-BLU 22W-1007-YEL-RED 22W-1007-YEL-RED 22W-1007-BLK-BRN 22W-1007-PNK-BLK 22W-1007-PNK-BLK 22W-1007-YEL-GRN 22W-1007-BRN-BLK 22W-1007-ORG-YEL 22W-1007-PNK-ORG 22W-1007-PNK-GRY 22W-1007-PNK-ORG 22W-1007-PNK-GRY 22W-1007-ORG-BRN 22W-1007-BRN-ORG 22W-1007-BRN-GRY 18W-1007-ORG-PNK 22W-1007-BRN-BLU, 1 2 3 4 18W-1007-ORG-GRN 18W-1007-ORG-GRN 22W-1007-BRN-RED, 22W-1007-ORG-RED, 22W-1007-BRN-GRN, 22W-1007-ORG-BRN, 22W-1007-BLK #310 2 2 22W-1007-BLK #366 22W-1007-BLK #366 2 GND 2-1-18-00-00-000 CA-3277 SUBWOOFER - SUBWOOFER +
39-01-3023 39-01-2020 12VDC FAN 39-01-3023 1 1 1 1 2 3 4 2 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 03-06-1042 39-01-2180 39-01-2100 - 11 + 10 12 13 14 15 16 17 18 10 03-06-1042 1 1 1 1 1 1 2 3 4 2 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 11 10 12 13 14 15 16 17 18 10
J #302 #311 #313 #315 J 2-520181-2 2-520181-2 RED BLK BLK RED 39-01-2020 39-01-2181 03-06-2042 39-01-3103 #328 #343 #344 #359 CBL10 CBL10 CBL10 CBL10 RGB LED Strip #190 #189,#190 #192 #195 #197,#243 #200 #165 #240 #241 #242 #228 #229 #230 #271 #272 #273 #256,#257 #258 #259 #231 #257,#270 RED BLK
CBL2 CBL2 [810-00046-01] 22W-1007-BLU 22W-1007-BRN-BLU 22W-1007-RED 22W-1007-BRN-RED 22W-1007-GRN 22W-1007-WHT 22W-1007-BRN-GRN 22W-1007-ORG-BRN 22W-1007-RED #365 1 12V_F8 18W-1007-BLK 22W-1007-ORG-RED, #362,#363 1 1 22W-1007-RED #365 22W-1007-BLK, #309,#310 2 2 22W-1007-BLK #367 22W-1007-BLK #367 2 GND 22W-1007-YEL-BLU SUBWOOFER - RED SUBWOOFER - GRN SUBWOOFER - BLU 22W-1007-BRN-BLU 22W-1007-BLK-BRN 12V_F4 22W-1007-PNK-BLK 22W-1007-YEL-GRN 22W-1007-BRN-BLK 22W-1007-ORG-YEL 22W-1007-BRN-RED 22W-1007-YEL-RED, 22W-1007-YEL-RED, CA-3277 22W-1007-BRN-GRN 22W-1007-PNK-ORG 22W-1007-PNK-GRY 18W-1007-ORG-BRN 22W-1007-BRN-ORG 22W-1007-BRN-GRY 18W-1007-ORG-PNK 18W-1007-ORG-GRN 18W-1007-ORG-RED, 18W-1007-ORG-BRN,
39-01-3023 39-01-2020 12VDC FAN + G K R B K #328 #343 #344 #359 22W-1007-BLU
22W-1007-RED Designed: Date: 22W-1007-GRN REV
22W-1007-WHT F 2020.12.30 ANSI D E JTN A L D TITLE L From: PC Compartment (2) Raw Thrills, Inc. VR System Diagram C [Monitor Cab Mid] 5441 Fargo Ave. rawthrills.com Montior Cabinet Mid / Compressor Compartment
[811-00119-01] /2.B7 B Skokie, IL 60077 tel: 847.679.8373 [810-00405-01] DWG
[811-00091-01] USA fax: 847.679.8538 INITIAL JTN 2020.12.30 A SHEET SHEETS DESCRIPTION BY DATE REV 3 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
[811-00093-01] [811-00111-01] RGB LED Strip A 12V_F2 + 22W-1007-WHT #441 A UPPER SHAPE LEFT - RED R 22W-1007-RED #454 UPPER SHAPE LEFT - GRN G 22W-1007-GRN #469 UPPER SHAPE LEFT - BLU B 22W-1007-BLU #482 22W-1007-WHT, #441,#442 1 1 22W-1007-ORG-BLU #409 22W-1007-RED, #454,#455 2 2 22W-1007-BLU-RED #420 22W-1007-GRN, #469,#470 3 3 22W-1007-BLU-GRN #421 22W-1007-BLU, #482,#483 4 4 22W-1007-BLU-BRN #422
RGB LED Strip 03-06-1042 03-06-2042 12V_F2 + 22W-1007-WHT #442 UPPER SHAPE LEFT - RED R 22W-1007-RED #455 HP Z1 Entry Tower G5 UPPER SHAPE LEFT - GRN G 22W-1007-GRN #470 B 850-00031-01 UPPER SHAPE LEFT - BLU B 22W-1007-BLU #483 B AUDIO 7 USB AUDIO SEC DONGLE WORKER 8 USB 5 1 SEC DONGLE WORKER 1 9 [811-00167-01] USB ETH RGB LED Strip 10 USB DONGLE 12V_F2 + 22W-1007-WHT #443 2 PC LINK ETHERNET 22W-1007-WHT #443 1 1 22W-1007-ORG-BLU, #410,#411 USB 3 UPPER RGBS - RED R 22W-1007-RED #456 22W-1007-RED #456 2 2 22W-1007-GRY-RED, #423,#424 P2 REVERB USB 11 USB 4 4 UPPER RGBS - GRN G 22W-1007-GRN #471 22W-1007-GRN #471 3 3 22W-1007-GRY-GRN, #426,#427 P2 LEAP MOTION 12 USB 3 22W-1007-BLU #484 4 4 22W-1007-GRY-BLU, #429,#430 5 UPPER RGBS - BLU B 22W-1007-BLU #484 13 03-06-2042 03-06-1042 USB-C 14 [810-00046-01] 6 DP C From: AC (PAGE - 1) C P2 REVERB DP 15 DISPLAY PORT 2 22W-1007-ORG-RED, #416,#417 1 1 22W-1007-RED #467 HDMI [PC 2] 22W-1007-BLK, #418,#419 2 2 22W-1007-BLK #496 PC 2 DISPLAY 16 HDMI-DVI #897 /1.D7 39-01-3023 39-01-2020 #405 #409 #410,#412 #415 #416 #418 #420 #421 #422 #423 #426 #429 #432 #433 #434 #435 #436 #437 #438 #439 #440 #406 #407 #408 AC 17 [811-00117-01] RGB LED Strip 12V_F2 + 22W-1007-WHT #444 #467 #496 ARM LEFT - RED R 22W-1007-RED #457 ARM LEFT - GRN G 22W-1007-GRN #472
ARM LEFT - BLU B 22W-1007-BLU #485 22W-1007-BLK 22W-1007-WHT, #444,#445 1 1 22W-1007-ORG-BLU, #411,#414 22W-1007-PNK-BLU 22W-1007-PUR-BLU 22W-1007-RED-BLU 22W-1007-BLU-RED 22W-1007-BLU-BRN 22W-1007-GRY-BLU 22W-1007-PNK-RED 22W-1007-PUR-RED 22W-1007-BLU-GRN 22W-1007-GRN-BLU 22W-1007-ORG-BLU 22W-1007-GRY-RED 22W-1007-PNK-GRN 22W-1007-PUR-GRN 22W-1007-RED-GRN 18W-1007-ORG-BLK 22W-1007-RED-ORG 22W-1007-ORG-RED 22W-1007-GRY-GRN
22W-1007-RED, #457,#458 2 2 22W-1007-PNK-RED #432 22W-1007-ORG-GRN 22W-1007-GRN-ORG 22W-1007-GRN-GRY 22W-1007-ORG-BLU, 22W-1007-GRN, #472,#473 3 3 22W-1007-PNK-GRN #433 22W-1007-BLK 22W-1007-RED
D 22W-1007-BLU, #485,#486 4 4 22W-1007-PNK-BLU #434 39-01-2080 D 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 39-01-2160 11 10 12 13 14 15 16
RGB LED Strip 03-06-1042 03-06-2042 1 2 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 11 HP Z1 Entry Tower G5 12V_F2 + 22W-1007-WHT #445 10 12 13 14 15 16 850-00031-01 ARM LEFT - RED R 22W-1007-RED #458 AUDIO ARM LEFT - GRN G 22W-1007-GRN #473 GND
7 ARM LEFT - BLU B 22W-1007-BLU #486 12V_F8 39-01-2161 USB 39-01-3083 AUDIO SEC DONGLE BOSS 8 USB 6 1 SEC DONGLE BOSS To: PC COMPARTMENT (PAGE-2) 1
9 #186 #187 #188 #193 #243 #164 #260 #261 #263 #244 #245 #246 #247 #248 #249 #250 #251 #252 #264 #265 #266 #225 #226 #227
[MONITOR CAB I/O] USB ETH USB DONGLE /2.M7 USB 7 2 AUDIO PC LINK 10 ETHERNET USB CA-3277 USB 8 3 REAR RIO2 12VDC FAN P1 REVERB USB 11 USB 2 4 E P1 LEAP MOTION 12 USB 1 E /7.G11 5 FRONT RIO2 RGB LED Strip USB 9 13 18W-1007-BLK USB-C To: FRONT MAIN (PAGE-7) 14 22W-1007-WHT #447 + 12V_F2 + 22W-1007-WHT #446 22W-1007-WHT #446 1 1 22W-1007-ORG-BLU #414 6 DP R UPPER RGBS - RED R 2 2
22W-1007-RED #462 22W-1007-RED #461 22W-1007-RED #461 22W-1007-GRY-RED, #424,#425 22W-1007-PNK-BLU 22W-1007-PUR-BLU 22W-1007-RED-BLU [Front I/O] 22W-1007-BLU-RED 22W-1007-BLU-BRN 22W-1007-GRY-BLU 22W-1007-PNK-RED 22W-1007-PUR-RED 22W-1007-BLU-GRN 18W-1007-GRN-BLU 18W-1007-ORG-BLU 18W-1007-ORG-BLU 22W-1007-GRY-RED 22W-1007-PNK-GRN 22W-1007-PUR-GRN 22W-1007-RED-GRN 18W-1007-ORG-BLK 22W-1007-RED-ORG 18W-1007-ORG-RED 22W-1007-GRY-GRN From: AC (PAGE - 1) 18W-1007-ORG-GRN 18W-1007-GRN-ORG 18W-1007-GRN-GRY P1 REVERB DP 15 DISPLAY PORT 1 22W-1007-GRN #475 G UPPER RGBS - GRN G 22W-1007-GRN #474 22W-1007-GRN #474 3 3 22W-1007-GRY-GRN, #427,#428 HDMI [PC 1] 22W-1007-BLU #487 4 4 22W-1007-GRY-BLU, #430,#431 22W-1007-BLU #488 B UPPER RGBS - BLU B 22W-1007-BLU #487 16 PC 1 DISPLAY HDMI-DVI #898 /1.C7 03-06-2042 03-06-1042 AC 17 RGB LED Strip
22W-1007-WHT #447 + 12V_F2 + 22W-1007-WHT #448 22W-1007-RED #462 R UPPER RGBS - RED R 22W-1007-RED #463 22W-1007-GRN #475 G UPPER RGBS - GRN G 22W-1007-GRN #476 F 22W-1007-BLU #488 B UPPER RGBS - BLU B 22W-1007-BLU #489 F
RGB LED Strip 12V_F2 + 22W-1007-WHT #448
UPPER RGBS - RED R 22W-1007-RED #463 #405 #406 #407 #408 UPPER RGBS - GRN G 22W-1007-GRN #476 UPPER RGBS - BLU B 22W-1007-BLU #489 [811-00109-01]
G G 22W-1007-GRN-BLU 18W-1007-ORG-BLK 22W-1007-GRN-ORG 22W-1007-GRN-GRY 12VDC FAN 39-01-3043 1 RGB LED Strip [811-00168-01] 2 3 4 CA-3277 12V_F2 + 22W-1007-WHT #449 ARM RIGHT - RED R 22W-1007-RED #459 Reserved For Future Use ARM RIGHT - GRN G 22W-1007-GRN #480 ARM RIGHT - BLU B 22W-1007-BLU #490 22W-1007-WHT, #449,#450 1 1 22W-1007-ORG-BLU #413 /2.B8 22W-1007-RED, #459,#460 2 2 22W-1007-PUR-RED #435 3 3
22W-1007-GRN, #480,#481 22W-1007-PUR-GRN #436 Connections] [Main Top GND 12V_F8
22W-1007-BLU, #490,#491 4 4 22W-1007-PUR-BLU #437 From: PC Compartment (2) 1 2 90-0002 Leap Motion RGB LED Strip 03-06-1042 03-06-2042 [811-00091-01] H 12V_F2 + 22W-1007-WHT #450 H P1 LEAP MOTION 1 USB 1 ARM RIGHT - RED R 22W-1007-RED #460 ARM RIGHT - GRN G 22W-1007-GRN #481 #468 #495 ARM RIGHT - BLU B 22W-1007-BLU #491 REVERB 2 JUNCTION BOX USB 2 1 P1 REVERB DISPLAY PORT 1 22W-1007-BLK [810-00046-01] 22W-1007-RED HP REVERB 2 1N0T4AA#ABA
22W-1007-ORG-RED #417 1 1 22W-1007-RED #468 I [811-00167-01] 22W-1007-BLK #419 2 2 22W-1007-BLK #495 I 39-01-3023 39-01-2020 From: AC (PAGE - 1) RGB LED Strip 12V_F2 + 22W-1007-WHT #451 [HEADSET 1] 22W-1007-WHT #451 1 1 22W-1007-ORG-BLU, #412,#413 POWER /1.C12 UPPER RGBS - RED R 22W-1007-RED #464 22W-1007-RED #464 2 2 22W-1007-GRY-RED #425 UPPER RGBS - GRN G 22W-1007-GRN #477 22W-1007-GRN #477 3 3 22W-1007-GRY-GRN #428 90-0002 Leap Motion UPPER RGBS - BLU B 22W-1007-BLU #492 22W-1007-BLU #492 4 4 22W-1007-GRY-BLU #431 03-06-2042 03-06-1042 P2 LEAP MOTION 1 USB 3
REVERB 2 JUNCTION BOX J USB 4 [811-00111-01] J P2 REVERB 1 DISPLAY PORT 2 RGB LED Strip 12V_F4 + 22W-1007-WHT #452 UPPER SHAPE RIGHT - RED R 22W-1007-RED #465 HP REVERB 2 1N0T4AA#ABA UPPER SHAPE RIGHT - GRN G 22W-1007-GRN #478 UPPER SHAPE RIGHT - BLU B 22W-1007-BLU #493 22W-1007-WHT, #452,#453 1 1 22W-1007-ORG-GRN #415 22W-1007-RED, #465,#466 2 2 22W-1007-RED-ORG #438 From: AC (PAGE - 1) 22W-1007-GRN, #478,#479 3 3 22W-1007-RED-GRN #439 [HEADSET 2] 22W-1007-BLU, #493,#494 4 4 22W-1007-RED-BLU #440 POWER /1.D12 RGB LED Strip 03-06-1042 03-06-2042 12V_F4 + 22W-1007-WHT #453 UPPER SHAPE RIGHT - RED R 22W-1007-RED #466 K UPPER SHAPE RIGHT - GRN G 22W-1007-GRN #479 K UPPER SHAPE RIGHT - BLU B 22W-1007-BLU #494
F Designed: Date: REV 2020.12.30 ANSI D E JTN A TITLE L D Raw Thrills, Inc. VR System Diagram L C 5441 Fargo Ave. rawthrills.com Monitor Cabinet Top / PCs & Headsets B Skokie, IL 60077 tel: 847.679.8373 DWG USA fax: 847.679.8538 INITIAL JTN 2020.12.30 A SHEET SHEETS DESCRIPTION BY DATE REV 4 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
M4KB330-08N-4-DC12V
DISTANCE SENSOR DISTANCE SENSOR GP2Y0A41SK0F GP2Y0A41SK0F
F-RT DIST SENS 1 1 CBL50 WHT CBL51 WHT 1 1 R-RT DIST SENS A A GND 2 2 CBL50 BLK CBL51 BLK 2 2 GND [811-00107-01] TC9FD-18-08 5V 3 3 5V 3 CBL50 RED CBL51 RED 3 2-520181-2 PHR-3 PHR-3 CBL41 RED 1 + SEAT SPEAKER LT + CBL37 RED 1 1 CBL41 RED CBL37 BLK 2 2 CBL41 BLK CBL41 BLK 1 - SEAT SPEAKER LT - 39-01-3023 39-01-2020 GND 5V PRESSURE SENSOR 2-520181-2 SPEAKER VALVE 1 VALVE 2 VALVE 3
Pressure Sensor VALVE 0 1(A) 2(B) 3(C) M7139-200PG-500000 A A A A B B B B 1 2 3 + - + - + - + - + - + - + - + - WHT BLK RED [811-00108-01] TC9FD-18-08 WHT BLK RED 2-520181-2 B B 1211-0192 CBL50 CBL50 CBL50 CBL42 RED 1 + SEAT SPEAKER RT + CBL39 RED 1 1 CBL42 RED CBL51 CBL51 CBL51 CBL39 BLK 2 2 CBL42 BLK
CBL42 BLK 1 - SEAT SPEAKER RT - #538 #528 #529 #521 #531 #525 #535 #520 #530 #524 #534 #522 #532 #526 #536 #523 #533 #527 #537
39-01-2020 39-01-3023 SPEAKER 1 1 2 3 2 3 39-01-4030 39-01-4030
[810-00479-01] [810-00479-01] 2-520181-2 1 1 2 3 2 3
[811-00100-01] [500-00065-01] 500-00065-01 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED
39-01-4036 39-01-4036 22W-1007-RED #710 + 12V_F16 22W-1007-ORG-PNK #687 1 1 22W-1007-RED #710 22W-1007-PNK-WHT
#649,#650 #644,#645 #655 #650 #645 #657 22W-1007-BLU-PUR #704 2 2 22W-1007-BLK #716 22W-1007-BLK #716 - SEAT PUCKS 03-06-2023 03-06-1023 C RED PUCK C
2-1-10-00-00-000 2-520181-2 22W-1007-BLK 22W-1007-RED CBL46 RED 1 + 22W-1007-BLK, P2 SEAT SUB + 22W-1007-RED, 22W-1007-BLK-YEL 22W-1007-BLK-PUR CBL46 BLK 1 - P2 SEAT SUB - 2-520181-2 SPEAKER [810-00315-01] White LED Strip Segments:1 22W-1007-ORG-PNK #689 1 1 22W-1007-RED #711 22W-1007-RED #711 + 12V_F16 22W-1007-ORG-PNK, #668,#669 1 1 22W-1007-ORG-PNK, #687,#688 22W-1007-BLU-BLK #706 2 2 22W-1007-BLK #717 D 22W-1007-ORG-PNK #669 2 2 22W-1007-ORG-PNK #689 22W-1007-BLK #717 - P2 SEAT BACK D 22W-1007-BLU-PUR #680 3 3 22W-1007-BLU-PUR, #704,#705 39-01-3023 39-01-2020 22W-1007-BLU-GRY #679 4 4 22W-1007-BLU-BLK #706 CBL36 RED 5 5 CBL46 RED DISTANCE SENSOR CBL36 BLK 6 6 CBL46 BLK [811-00165-01] GP2Y0A41SK0F 22W-1007-RED #672 7 7 22W-1007-RED #707
22W-1007-BLK #675 8 8 22W-1007-BLK #708 CBL47 WHT 1 1 P2 DIST SENS #520 #521 #522 #523 #524 #525 #526 #527 #528 #529 #530 #531 #532 #533 #534 #535 #536 #537 #538 22W-1007-BRN-PUR #686 9 9 22W-1007-BRN-PNK #709 22W-1007-BLK #708 1 1 CBL47 BLK 2 18W-1007-GRN-YEL #684 10 10 18W-1007-GRN-YEL #700 CBL47 BLK 2 GND 22W-1007-RED #707 2 2 CBL47 RED 39-01-2100 3 39-01-3103 22W-1007-BRN-PNK #709 3 3 CBL47 WHT CBL47 RED 3 5V 18W-1007-GRN-YEL #700 4 4 18W-1007-GRN-YEL #701 PHR-3 03-06-2042 03-06-1042 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK 2-32952-1 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-RED E 18W-1007-GRN-YEL #701 E 22W-1007-PNK-WHT
[500-00065-01] 500-00065-01 [811-00161-01] 1 2 3 4 5 6 7 8 9 39-01-2200 11 20 10 12 13 14 15 16 17 18 19
22W-1007-RED #712 + 12V_F16 1 1 2 3 4 5 6 7 8 9 2 11 20 22W-1007-ORG-PNK #688 1 1 22W-1007-RED #712 10 12 13 14 15 16 17 18 19 22W-1007-BLU-PUR #705 2 2 22W-1007-BLK #718 [811-00099-01] 22W-1007-BLK #718 - SEAT PUCKS 03-06-2023 03-06-1023 RED PUCK 39-01-3023 39-01-2201
[811-00101-01] LED(+) #497,#498 #498 #499,#500 #500 #501,#502 #502 #503,#504 #504 #518 #517 #509 #510 #511 #512 #513 #514 #515 #516 #519 #508 #505 22W-1007-RED #723 1 4 5V F 2-520183-4LED(-) F 18W-1007-ORG-PNK #641 1 1 22W-1007-ORG-PNK, #666,#668 22W-1007-BRN-BLK #724 1 3 MOTION STOP LAMP 22W-1007-RED #646 2 2 22W-1007-RED, #670,#671 1 22W-1007-RED, #670,#672 1 22W-1007-RED #723 2-520183-4 22W-1007-BLK #651 3 3 22W-1007-BLK, #673,#674 22W-1007-BLK, #673,#675 2 2 22W-1007-BLK #722 22W-1007-BLK-ORG #652 4 4 22W-1007-BLK-ORG #676 22W-1007-BLK 22W-1007-BLK 22W-1007-BLK-ORG #676 3 3 22W-1007-BLK-ORG #725 22W-1007-RED 22W-1007-BLK-ORG #725 1 2 MOTION STOP 22W-1007-BRN-BLK #653 5 5 22W-1007-BRN-BLK #677 22W-1007-BRN-BLK #677 4 4 22W-1007-BRN-BLK #724 2-520181-2 SW-NO 22W-1007-BLU-BLK #658 6 6 22W-1007-BLU-BLK #678 18W-1007-GRN-YEL, #682,#684 5 5 18W-1007-GRN-YEL #702 22W-1007-BLK-PNK 22W-1007-BLK-PUR 22W-1007-BLU-PNK 22W-1007-BLU-PUR 22W-1007-ORG-YEL 22W-1007-ORG-YEL 22W-1007-ORG-YEL 22W-1007-ORG-YEL 22W-1007-BLK-GRN 22W-1007-BLK-GRY 22W-1007-BLK-ORG 22W-1007-BLU-WHT 22W-1007-BLK-WHT 22W-1007-PNK-WHT 22W-1007-BLU-GRY #659 7 7 22W-1007-BLU-GRY #679 6 6 22W-1007-BLK #722 1 1 GND 22W-1007-ORG-YEL, 22W-1007-ORG-YEL, 22W-1007-ORG-YEL, 22W-1007-ORG-YEL, 22W-1007-BLU-PUR #660 8 8 22W-1007-BLU-PUR, #680,#681 39-01-3063 39-01-2060 2-520181-2 SW-COM CBL31 RED 9 9 CBL37,CBL38 RED,RED CBL31 BLK 10 10 CBL37,CBL38 BLK,BLK CBL32 RED 11 11 CBL39,CBL40 RED,RED CBL32 BLK 12 12 CBL39,CBL40 BLK,BLK 18W-1007-GRN-YEL #702 CBL33 RED 13 13 CBL35 RED 2-32952-1 G CBL33 BLK 14 14 CBL35 BLK G CBL34 RED 15 15 CBL36 RED CBL34 BLK 16 16 CBL36 BLK 18W-1007-GRN-YEL #661 17 17 18W-1007-GRN-YEL, #682,#683 [500-00065-01] 500-00065-01 22W-1007-BRN-PNK #664 18 18 22W-1007-BRN-PNK #685 [811-00100-01] 22W-1007-BRN-PUR #665 19 19 22W-1007-BRN-PUR #686 22W-1007-RED #713 + 12V_F16 [811-00098-01] 20 20 22W-1007-ORG-PNK #690 1 1 22W-1007-RED #713 39-01-2201 39-01-2200 22W-1007-BLU-PUR #693 2 2 22W-1007-BLK #719 22W-1007-BLK #719 - SEAT PUCKS 03-06-2023 03-06-1023 RED PUCK 2-1-10-00-00-000 2-520181-2
CBL45 RED 1 + P1 SEAT SUB + #497,#499 #501,#503 #505,#506 #507 #508 #509 #510 #511 #512 #513 #514 #515 #516 #517 #518 #519 #507 #506 H From: Front Lower (PAGE-6) H CBL45 BLK 1 - P1 SEAT SUB -
[Seat Connections] SPEAKER 2-520181-2 /6.C14 [810-00315-01] White LED Strip Segments:1 22W-1007-BLK 22W-1007-BLK 22W-1007-RED 22W-1007-ORG-PNK #692 1 1 22W-1007-RED #714 22W-1007-RED #714 + 12V_F16 22W-1007-BLK, 22W-1007-ORG-PNK, #666,#667 1 1 22W-1007-ORG-PNK, #690,#691 22W-1007-BLU-BLK #695 2 2 22W-1007-BLK #720 22W-1007-ORG-PNK #667 2 2 22W-1007-ORG-PNK #692 22W-1007-BLK #720 - P2 SEAT BACK 22W-1007-BLK-RED 22W-1007-BLK-RED 22W-1007-BLK-PNK 22W-1007-BLK-PUR 22W-1007-BLU-PNK 22W-1007-BLU-PUR 22W-1007-BLK-GRN 22W-1007-BLK-GRY 22W-1007-BLK-ORG 22W-1007-BLK-WHT 22W-1007-BLU-WHT 22W-1007-PNK-WHT 22W-1007-BLU-PUR #681 3 3 22W-1007-BLU-PUR, #693,#694 39-01-3023 39-01-2020 22W-1007-ORG-YEL, 22W-1007-ORG-YEL, 22W-1007-BLU-BLK #678 4 4 22W-1007-BLU-BLK #695 39-01-3023 1 1 2 3 4 5 6 7 8 9 2 39-01-2160 11 CBL35 RED 5 5 CBL45 RED 10 12 13 14 15 16 DISTANCE SENSOR [811-00095-01] CBL35 BLK 6 6 CBL45 BLK [811-00165-01] GP2Y0A41SK0F 1 2 3 4 5 6 7 8 9 11 22W-1007-RED #671 7 7 22W-1007-RED #697 10 12 13 14 15 16 22W-1007-BLK #674 8 8 22W-1007-BLK #696 CBL48 WHT 1 1 P1 DIST SENS I 22W-1007-BRN-PNK #685 9 9 22W-1007-BRN-PNK #698 I 22W-1007-BLK #696 1 1 CBL48 BLK 2 18W-1007-GRN-YEL #683 10 10 18W-1007-GRN-YEL #699 CBL48 BLK 2 GND 22W-1007-RED #697 2 2 CBL48 RED 39-01-2100 3 39-01-2161 39-01-3103 22W-1007-BRN-PNK #698 3 3 CBL48 WHT CBL48 RED 3 5V 18W-1007-GRN-YEL #699 4 4 18W-1007-GRN-YEL #703 PHR-3 #201,#208 #208 #212 #222 #223 #232 #233 #234 #235 #236 #237 #238 #239 #224 #209 #216 03-06-2042 03-06-1042 2-32952-1 18W-1007-GRN-YEL #703
500-00065-01 #647,#648 #642,#643 #654 #648 #643 #656 22W-1007-BLK 22W-1007-BLK 22W-1007-RED 22W-1007-RED #715 + 12V_F16 22W-1007-ORG-PNK #691 1 1 22W-1007-RED #715 22W-1061-BLK-RED 22W-1007-BLK-PNK 22W-1007-BLK-PUR 22W-1007-BLU-PNK 22W-1007-BLU-PUR 22W-1007-ORG-YEL 22W-1007-BLK-GRN 22W-1007-BLK-GRY 22W-1007-BLK-ORG 22W-1061-BLK-WHT 22W-1007-BLU-WHT 22W-1061-PNK-WHT 22W-1007-BLU-PUR #694 2 2 22W-1007-BLK #721 22W-1007-ORG-YEL, J 22W-1007-BLK #721 - SEAT PUCKS J 03-06-2023 03-06-1023 RED PUCK 22W-1007-BLK 22W-1007-RED 22W-1007-BLK, 22W-1007-RED, [500-00065-01] 22W-1007-BLK-PNK 22W-1007-BLK-WHT [811-00107-01] TC9FD-18-08 2-520181-2 1 1 2 3 2 3 39-01-4036 39-01-4036 CBL43 RED 1 + SEAT SPEAKER LT + CBL38 RED 1 1 CBL43 RED 1 1 2 3 2 3 CBL38 BLK 2 2 CBL43 BLK CBL43 BLK 1 - SEAT SPEAKER LT - 39-01-3023 39-01-2020 2-520181-2 SPEAKER
K 39-01-4030 39-01-4030 K WHT WHT BLK RED BLK RED
[811-00108-01] TC9FD-18-08 2-520181-2 CBL52 CBL52 CBL52 CBL49 CBL49 CBL49
[810-00479-01] [810-00479-01] + CBL44 RED 1 SEAT SPEAKER RT + [Spacer Pedestal] CBL40 RED 1 1 CBL44 RED CBL40 BLK 2 2 CBL44 BLK CBL44 BLK 1 - SEAT SPEAKER RT -
DISTANCE SENSOR DISTANCE SENSOR 39-01-2020 39-01-3023 SPEAKER /2.M10 [811-00091-01] 2-520181-2 From: PC Compartment (PAGE-2) GP2Y0A41SK0F GP2Y0A41SK0F
F-LT DIST SENS 1 1 CBL52 WHT CBL49 WHT 1 1 R-LT DIST SENS F Designed: Date: REV JTN 2020.12.30 A ANSI D GND 2 2 CBL52 BLK CBL49 BLK 2 2 GND E L D TITLE L 5V 3 3 CBL52 RED CBL49 RED 3 3 5V Raw Thrills, Inc. VR System Diagram C PHR-3 PHR-3 5441 Fargo Ave. rawthrills.com Seat Pedestal & Spacer Pedestal B Skokie, IL 60077 tel: 847.679.8373 DWG USA fax: 847.679.8538 INITIAL JTN 2020.12.30 A SHEET SHEETS DESCRIPTION BY DATE REV 5 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
A RGB LED Strip RGB LED Strip RGB LED Strip A
RGB LED Strip 22W-1007-WHT #613 + 12V_F11 [811-00098-01] /5.I1 22W-1007-BLK-RED #615 R RT FLOOR UP - RED 22W-1007-BLK-GRN #616 G RT FLOOR UP - GRN
12V_F14 RT FRONT SHAPE - RED RT FRONT SHAPE - GRN RT FRONT SHAPE - BLU 12V_F14 RT FRONT SHAPE - RED RT FRONT SHAPE - GRN RT FRONT SHAPE - BLU 12V_F14 - RED RT FRONT T-MOLD - GRN RT FRONT T-MOLD - BLU RT FRONT T-MOLD 22W-1007-BLK-BLU #617 B RT FLOOR UP - BLU + + + G G G R B R B R B
B B [Seat Connections] #601 #603 #605 #607 #602 #604 #606 #608 #609 #610 #611 #612
RGB LED Strip 22W-1007-WHT #614 + 12V_F11 Seat Pedestal (PAGE-5) To: 22W-1007-BRN-RED #618 R RT FLOOR DOWN - RED 22W-1007-BRN-GRN #619 G RT FLOOR DOWN - GRN 22W-1007-BRN-BLU #620 B RT FLOOR DOWN - BLU 22W-1007-BLU 22W-1007-BLU 22W-1007-BLU 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-GRN 22W-1007-GRN 22W-1007-GRN 22W-1007-WHT 22W-1007-WHT 22W-1007-WHT
C C #613,#614 #615 #616 #617 #618 #619 #620 #641 #642,#644 #646 #647,#649 #651 #652 #653 #654 #655 #656 #657 #658 #659 #660 #661 #664 #665 #609 #610 #611 #612 #601,#602 #603,#604 #605,#606 #607,#608 22W-1007-BLK 22W-1007-RED 22W-1007-BLK, 22W-1007-WHT, 22W-1007-RED, 22W-1007-BLU 22W-1007-RED 22W-1007-BLK-BLU 22W-1007-GRN 22W-1007-WHT 22W-1007-BLK-RED 22W-1007-BRN-BLU 22W-1007-BLK-YEL 22W-1007-BLK-GRN 22W-1007-BRN-RED 22W-1007-BLU-BLK 22W-1007-BRN-GRN 22W-1007-BLK-PNK 22W-1007-BLK-PUR 22W-1007-BLU-PUR 22W-1007-BRN-BLK 18W-1007-GRN-YEL 22W-1007-BLK-ORG 22W-1007-BLU-GRY 22W-1007-BRN-PNK 22W-1007-BRN-PUR 22W-1007-BLK-WHT 18W-1007-ORG-PNK 22W-1007-BLU, 22W-1007-RED, 22W-1007-GRN, 22W-1007-WHT, 03-06-1042 39-01-2180 1 1 1 1 2 3 4 2 3 4 2 3 4 5 6 7 8 2 3 4 5 6 7 8 9 03-06-1042 39-01-3083 [811-00114-01] 11 10 12 13 14 15 16 17 18 [811-00109-01] [811-00104-01] 1 1 1 1 2 3 4 2 3 4 2 3 4 5 6 7 8 2 3 4 5 6 7 8 9 11 D [811-00097-01] 10 12 13 14 15 16 17 18 D RED BLK RED BLK RED BLK RED BLK 39-01-2181 03-06-2042 03-06-2042 39-01-2080 CBL31 CBL31 CBL32 CBL32 CBL33 CBL33 CBL34 CBL34 #546 #580 #581 #582 #545 #583 #584 #585 #540 #595 #596 #597 #598 #599 #600 #549 #566 #567 #568 #569 #754 #755 #570 #571 #572 #573 #574 #575 #576 #565 #662 #663 39-01-2080 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 [811-00102-01] 22W-1007-BLK 22W-1007-BLK E 22W-1007-RED 22W-1007-RED E 39-01-3083 22W-1007-PUR-BLU 22W-1007-BLU-RED 22W-1007-BLU-BRN 22W-1007-PUR-RED 22W-1007-GRY-BLU 22W-1007-BLU-GRN 22W-1007-WHT-BLU 22W-1007-PUR-GRN 22W-1007-GRY-RED 22W-1007-BLK-YEL 18W-1007-ORG-BLK 22W-1007-WHT-RED 22W-1007-GRY-GRN 22W-1007-BLU-BLK 18W-1007-ORG-GRN 18W-1007-ORG-GRN 22W-1007-WHT-GRN 22W-1007-BLK-PNK 22W-1007-BLK-PUR 22W-1007-BRN-BLK 18W-1007-GRN-YEL 22W-1007-BLK-ORG 22W-1007-BLU-GRY 22W-1007-BRN-PNK 22W-1007-BRN-PUR 22W-1007-BLK-WHT 22W-1007-BLU-WHT 18W-1007-ORG-PNK RED BLK RED BLK RED BLK RED BLK CBL23 CBL23 CBL24 CBL24 CBL27 CBL27 CBL28 CBL28
[811-00091-01] F CBL23 RED 1 1 CBL5 RED F CBL23 BLK 2 2 CBL5 BLK CBL24 RED 3 3 CBL6 RED CBL24 BLK 4 4 CBL6 BLK To: Front Main (PAGE-7) CBL25 RED 5 5 CBL3 RED [Front Main Connections] CBL25 BLK 6 6 CBL3 BLK /2.M10 CBL26 RED 7 7 CBL4 RED From: PC Compartment (PAGE-2) /7.K1 CBL26 BLK 8 8 CBL4 BLK CBL27 RED 9 9 CBL7 RED [Audio & Earth] CBL29 RED 1 1 CBL25 RED CBL27 BLK 10 10 CBL7 BLK CBL29 BLK 2 2 CBL25 BLK CBL28 RED 11 11 CBL8 RED CBL30 RED 3 3 CBL26 RED CBL28 BLK 12 12 CBL8 BLK CBL30 BLK 4 4 CBL26 BLK 39-01-2040 39-01-3043 39-01-2120 39-01-3123 G G [811-00116-01]
18W-1007-GRN-YEL #564 1 1 CBL22 RED CBL22 RED 1 1 18W-1007-GRN-YEL, #274,#275 18W-1007-GRN-YEL #565 2 2 CBL22 BLK CBL22 BLK 2 2 18W-1007-GRN-YEL #275 39-01-2020 39-01-3023 39-01-2020 39-01-3023
[811-00103-01] [811-00158-01]
18W-1007-ORG-BLK #540 1 1 CBL12 RED CBL12 RED 1 1 18W-1007-ORG-BLK #176 18W-1007-ORG-BLU #541 2 2 CBL13 RED CBL13 RED 2 2 18W-1007-ORG-BLU #177 H 18W-1007-ORG-BRN, #542,#543 3 3 CBL14 RED CBL14 RED 3 3 18W-1007-ORG-BRN #178 H 18W-1007-ORG-GRN, #544,#545 4 4 CBL15 RED CBL15 RED 4 4 18W-1007-ORG-GRN #179 18W-1007-ORG-GRY, #547,#548 5 5 CBL16 RED CBL16 RED 5 5 18W-1007-ORG-GRY #180 #542 #577 #578 #579 #543 #586 #587 #588 #541 #589 #590 #591 #592 #593 #594 18W-1007-ORG-PNK #549 6 6 CBL17 RED CBL17 RED 6 6 18W-1007-ORG-PNK #181 18W-1007-ORG-PUR #550 7 7 CBL18 RED CBL18 RED 7 7 18W-1007-ORG-PUR #182 /2.M9 18W-1007-ORG-RED #551 8 8 CBL19 RED CBL19 RED 8 8 18W-1007-ORG-RED #183 From: PC Compartment (PAGE-2) 18W-1007-ORG-WHT #552 9 9 CBL20 RED CBL20 RED 9 9 18W-1007-ORG-WHT #184 [Front Power] 18W-1007-ORG-YEL #553 10 10 CBL21 RED CBL21 RED 10 10 18W-1007-ORG-YEL #185 18W-1007-BLK #554 11 11 CBL12 BLK CBL12 BLK 11 11 18W-1007-BLK #166 18W-1007-BLK #555 12 12 CBL13 BLK CBL13 BLK 12 12 18W-1007-BLK #167 18W-1007-BLK #556 13 13 CBL14 BLK CBL14 BLK 13 13 18W-1007-BLK #168 18W-1007-BLK #557 14 14 CBL15 BLK CBL15 BLK 14 14 18W-1007-BLK #169 22W-1007-BLK-BLU 22W-1007-PNK-BLU 22W-1007-RED-BLU 22W-1007-BLK-RED 22W-1007-BRN-BLU 22W-1007-PNK-RED 22W-1007-BLK-GRN 22W-1007-BRN-RED 18W-1007-ORG-BLU 22W-1007-PNK-GRN 22W-1007-RED-GRN 22W-1007-RED-ORG 22W-1007-BRN-GRN 18W-1007-ORG-BRN 18W-1007-ORG-BRN 18W-1007-BLK #558 15 15 CBL16 BLK CBL16 BLK 15 15 18W-1007-BLK #170 18W-1007-BLK #559 16 16 CBL17 BLK CBL17 BLK 16 16 18W-1007-BLK #171 03-06-2042 39-01-2080 1 1 1 2 3 4 2 3 4 2 3 4 5 6 7 8 I 03-06-1042 18W-1007-BLK #560 17 17 CBL18 BLK CBL18 BLK 17 17 18W-1007-BLK #172 I 18W-1007-BLK #561 18 18 CBL19 BLK CBL19 BLK 18 18 18W-1007-BLK #173 1 1 1 2 3 4 2 3 4 2 3 4 5 6 7 8 18W-1007-BLK #562 19 19 CBL20 BLK CBL20 BLK 19 19 18W-1007-BLK #174 18W-1007-BLK #563 20 20 CBL21 BLK CBL21 BLK 20 20 18W-1007-BLK #175 39-01-2200 39-01-2201 39-01-2200 39-01-2201 03-06-1042 39-01-3083 #629 #634 #637 #640 03-06-2042 #630,#631 #632,#633 #635,#636 #638,#639 #621,#622 #623 #624 #625 #626 #627 #628 [811-00104-01] [811-00114-01] [811-00109-01] 22W-1007-BLU 22W-1007-RED 22W-1007-GRN 22W-1007-WHT 22W-1007-BLU, 22W-1007-RED,
J 22W-1007-GRN, J 22W-1007-WHT, 22W-1007-WHT, 22W-1007-BLK-BLU 22W-1007-BLK-RED 22W-1007-BRN-BLU 22W-1007-BLK-GRN 22W-1007-BRN-RED 22W-1007-BRN-GRN
RGB LED Strip 22W-1007-WHT #621 + 12V_F12 #630 #632 #635 #638 #631 #633 #636 #639 #629 #634 #637 #640 22W-1007-BLK-RED #623 R LT FLOOR UP - RED 22W-1007-BLK-GRN #624 G LT FLOOR UP - GRN 22W-1007-BLK-BLU #625 B LT FLOOR UP - BLU
K K 22W-1007-BLU 22W-1007-BLU 22W-1007-BLU 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-GRN 22W-1007-GRN 22W-1007-GRN 22W-1007-WHT 22W-1007-WHT 22W-1007-WHT + + + G G G R B R B R B RGB LED Strip 22W-1007-WHT #622 + 12V_F12 22W-1007-BRN-RED #626 R LT FLOOR DOWN - RED 22W-1007-BRN-GRN #627 G LT FLOOR DOWN - GRN 12V_F13 12V_F13 12V_F13 22W-1007-BRN-BLU #628 B LT FLOOR DOWN - BLU
F Designed: Date: REV 2020.12.30 ANSI D E JTN A L D TITLE L LT FRONT SHAPE - BLU LT FRONT SHAPE - BLU LT LT FRONT SHAPE - RED LT FRONT SHAPE - RED LT LT FRONT SHAPE - GRN LT FRONT SHAPE - GRN LT VR System Diagram
LT FRONT T-MOLD - BLU FRONT T-MOLD LT Raw Thrills, Inc. LT FRONT T-MOLD - RED FRONT T-MOLD LT LT FRONT T-MOLD - GRN FRONT T-MOLD LT C 5441 Fargo Ave. rawthrills.com Front Lower B Skokie, IL 60077 tel: 847.679.8373 DWG USA fax: 847.679.8538 RGB LED Strip RGB LED Strip RGB LED Strip INITIAL 2020.12.30 A SHEET SHEETS DESCRIPTION BY DATE REV 6 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 NOTE: ORG-GRN and ORG-GRY wire colors may have been A flipped on cabinets 1005 - 1075 A on harness 811-00096-01 #790 #836 #837 #756 #778 #779 #780 #784 #785 #786 #781 #782 #783 #787 #828,#831 #829,#830 #832,#833 #834 #835 #765 22W-1007-BRN 22W-1007-GRN-YEL 22W-1007-BLU-YEL 22W-1007-BLK-BLU 22W-1007-BLK-RED 22W-1007-BLU-RED 22W-1007-BLU-BRN 22W-1007-BRN-BLU 18W-1007-BLU-PNK 18W-1007-BLU-PUR 22W-1007-BRN-BLK 22W-1007-BLK-GRN 22W-1007-BLU-GRN 22W-1007-BRN-RED 22W-1007-YEL-BLK, 22W-1007-GRY-RED 22W-1007-BLU-WHT 22W-1007-BRN-GRN 22W-1007-YEL-GRY, B 22W-1007-YEL-ORG, B 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 39-01-2220 39-01-2100 21 11 20 22 10 12 13 14 15 16 17 18 19 10
39-01-2200 -P8 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 9 22 10 21 11 20 10 12 13 14 15 16 17 18 19 -P7 22W-1007-GRY-GRN #788 1 1 RT FLOOR DOWN - GRN -P2 22W-1007-GRY-BLU #789 2 2 RT FLOOR DOWN - BLU 22W-1007-BLU-BLK #763 3 3 P2 SEAT BACK
22W-1007-BLU-GRY #764 4 4 P2 SEAT BACK 2-32952-1 22W-1007-PNK-RED #766 5 5 LT FRONT SHAPE - RED 22W-1007-PNK-GRN #767 6 6 LT FRONT SHAPE - GRN P1 BLOWER P2 BLOWER
22W-1007-PNK-BLU #768 7 7 LT FRONT SHAPE - BLU PUCKS SEAT 22W-1007-PUR-RED #769 8 8 RT FRONT SHAPE - RED 22W-1007-PUR-GRN #770 9 9 RT FRONT SHAPE - GRN -P1 LT FLOOR UP - BLU FLOOR UP LT LT FLOOR UP - RED FLOOR UP LT - BLU RT FLOOR UP
10 - GRN FLOOR UP LT - RED RT FLOOR UP 22W-1007-PUR-BLU #771 10 RT FRONT SHAPE - BLU - GRN RT FLOOR UP C LAMP MOTION STOP 12V_F20 1 1 18W-1007-ORG-YEL #731 C 22W-1007-RED-ORG #772 11 11 LT FRONT T-MOLD - RED 5V 2 2 22W-1007-RED #826 LT FLOOR DOWN - BLU LT LT FLOOR DOWN - RED LT LT FLOOR DOWN - GRN LT RT FLOOR DOWN - RED MOTION STOP LT LAMP LT MOTION STOP MOTION STOP RT LAMP MOTION STOP
22W-1007-RED-GRN #773 12 12 FRONT SPEAKERS - BLU LT FRONT T-MOLD - GRN FRONT SPEAKERS - RED FRONT SPEAKERS - GRN 5V 3 3 22W-1007-RED #827 22W-1007-RED-BLU #774 13 13 LT FRONT T-MOLD - BLU To: Front Main Left (PAGE-8) 4 4 22W-1007-WHT-RED #775 14 14 RT FRONT T-MOLD - RED 5 5 [Front Main Left] 22W-1007-WHT-GRN #776 15 15 RT FRONT T-MOLD - GRN GND 6 6 18W-1007-BLK #733 /8.G8 22W-1007-WHT-BLU #777 16 16 RT FRONT T-MOLD - BLU GND 7 7 18W-1007-BLK #734 22W-1007-YEL-RED, #791,#793 17 17 FRONT INTERIOR - RED GND 8 8 18W-1007-BLK #735 22W-1007-YEL-GRN, #795,#797 18 18 FRONT INTERIOR - GRN GND 9 9 18W-1007-BLK #736 22W-1007-YEL-BLU, #799,#801 19 19 FRONT INTERIOR - BLU GND 10 10 18W-1007-BLK #737 22W-1007-BLU-ORG #809 20 20 FRONT TRANSLITE GND 11 11 18W-1007-BLK #738 GND 12 12 18W-1007-BLK #739 -P6 500-00199-05 13 13 1 [RIO2] 5V 14 14 22W-1007-RED #732 D 2 15 15 D 3 GND 16 16 18W-1007-BLK #740 4 GND 17 17 18W-1007-BLK #741 5 GND 18 18 18W-1007-BLK #742 6 GND 19 19 18W-1007-BLK #743 7 GND 20 20 18W-1007-BLK #810 8 GND 21 21 22W-1007-BLK #812 [811-00106-01] 9 GND 22 22 22W-1007-BLK #813 12V_F19 1 22W-1007-ORG-WHT #852 10 GND 23 23 22W-1007-BLK #814 DBV 1 2 22W-1007-GRY-BRN #856 11 GND 24 24 22W-1061-BLK #815 GND 3 22W-1007-BLK #854 12 13 39-01-2240 22W-1007-ORG-WHT, #852,#853 1 1 18W-1007-ORG-WHT, #728,#729 03-09-1032 14 22W-1007-BLK, #854,#855 2 2 18W-1007-BLK, #810,#811 15 3 3 22W-1007-GRY-BRN #856 22W-1061-GRY-BRN #818 16 E 22W-1007-GRY-ORG #857 4 4 22W-1061-GRY-ORG #819 E 39-01-2040 12V_F19 1 22W-1007-ORG-WHT #853 39-01-3043 COIN 1 COIN 2 GND DBV 1 DBV 2 LT MOTION STOP RT MOTION STOP P1 E-TICKET DRIVE P1 E-TICKET NOTCH P2 E-TICKET DRIVE P2 E-TICKET NOTCH MOTION STOP DIST SENS F-LT F-RT DIST SENS DIST SENS R-LT R-RT DIST SENS P1 DIST SENS P2 DIST SENS DBV 2 2 22W-1007-GRY-ORG #857 USB 9 FRONT RIO2 2 3 4 5 6 7 8 9 1 21 31 11 20 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 3 22W-1007-BLK #855 10 12 13 14 15 16 17 18 19 38
GND -P4 03-09-1032 1 2 3 4 5 6 7 8 9 21 31 11 20 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 10 12 13 14 15 16 17 18 19 From: PC (PAGE-4) [Front I/O]
/4.F1 51353-3800 #816 #817 #818 #819 #820 #821 #822 #823 #824 #825 #753 #757 #758 #759 #760 #761 #762 #815 F F [811-00097-01] [811-00096-01] 22W-1061-BLK 22W-1061-BLK-YEL 22W-1061-BLK-BRN 22W-1061-BLK-PNK 22W-1061-BLK-PUR 22W-1061-GRN-BLU 22W-1061-BLK-GRY 22W-1061-BLK-ORG 22W-1061-BRN-PNK 22W-1061-BRN-PUR 22W-1061-GRY-BRN 22W-1061-GRN-BLK 22W-1061-BLK-WHT 22W-1061-GRY-PNK 22W-1061-GRY-PUR 22W-1061-GRN-BRN 22W-1061-GRY-ORG White LED Strip 22W-1061-GRN-GRY 22W-1007-RED #840 + 12V_F14
22W-1007-BLK #843 - FRONT TRANSLITE 18W-1007-ORG-GRN, #544,#546 1 1 22W-1007-ORG-GRN #744 18W-1007-ORG-GRY #547 2 2 22W-1007-ORG-GRY, #745,#746 White LED Strip G 18W-1007-ORG-GRY #548 3 3 22W-1007-ORG-GRY, #748,#749 G 18W-1007-ORG-PUR #550 4 4 18W-1007-ORG-PUR #726 22W-1007-RED #840 + 12V_F14 + 22W-1007-RED #839 18W-1007-ORG-RED #551 5 5 18W-1007-ORG-RED #727 22W-1007-BLK #843 - - 22W-1007-BLK #842 18W-1007-ORG-WHT #552 6 6 18W-1007-ORG-WHT, #728,#730 FRONT TRANSLITE 18W-1007-ORG-YEL #553 7 7 18W-1007-ORG-YEL #731 22W-1007-RED, #566,#567 8 8 22W-1007-RED #732 White LED Strip 18W-1007-BLK #554 9 9 18W-1007-BLK #733 18W-1007-BLK #555 10 10 18W-1007-BLK #734 22W-1007-RED #838 + 12V_F14 + 22W-1007-RED #839 18W-1007-BLK #556 11 11 18W-1007-BLK #735 22W-1007-BLK #841 - - 22W-1007-BLK #842 18W-1007-BLK #557 12 12 18W-1007-BLK #736 FRONT TRANSLITE 18W-1007-BLK #558 13 13 18W-1007-BLK #737 18W-1007-BLK #559 14 14 18W-1007-BLK #738 18W-1007-BLK #560 15 15 18W-1007-BLK #739 [811-00166-01] 18W-1007-BLK #561 16 16 18W-1007-BLK #740 H 18W-1007-BLK #562 17 17 18W-1007-BLK #741 H 18W-1007-BLK #563 18 18 18W-1007-BLK #742 RGB LED Strip
#838 #841 22W-1007-WHT #844 + 12V_F15 22W-1007-BLK, #568,#569 19 19 18W-1007-BLK #743 22W-1007-ORG-GRY, #749,#750 1 1 22W-1007-WHT #844 22W-1007-BLK-ORG #754 20 20 22W-1061-BLK-ORG #753 22W-1007-YEL-RED, #805,#806 2 2 22W-1007-RED #846 22W-1007-RED #846 R FRONT INTERIOR - RED 22W-1007-BRN-BLK #755 21 21 22W-1007-BRN-BLK #756 22W-1007-YEL-GRN, #807,#808 3 3 22W-1007-GRN #848 22W-1007-GRN #848 G FRONT INTERIOR - GRN 22W-1007-BLK-PNK #570 22 22 22W-1061-BLK-PNK #757 22W-1007-YEL-BLU, #803,#804 4 4 22W-1007-BLU #850 22W-1007-BLU #850 B FRONT INTERIOR - BLU 22W-1007-BLK-PUR #571 23 23 22W-1061-BLK-PUR #758 22W-1007-BLK-WHT #572 24 24 22W-1061-BLK-WHT #759 03-06-1042 03-06-2042
39-01-2241 39-01-2240 22W-1007-BLK 22W-1007-RED [Front Main Right] /8.G13 22W-1007-BLK-YEL #573 1 1 22W-1061-BLK-YEL #760 [811-00115-01] 1 2 39-01-2020 [811-00166-01] 22W-1007-BLU-BLK #574 2 2 22W-1007-BLU-BLK #763
22W-1007-BLU-GRY #575 3 3 22W-1007-BLU-GRY #764 Front Main Right (PAGE-8) To: 1 22W-1007-BLU-WHT #576 4 4 22W-1007-BLU-WHT #765 2 RGB LED Strip I 22W-1007-PNK-RED #577 5 5 22W-1007-PNK-RED #766 22W-1007-WHT #845 + 12V_F15 I 22W-1007-ORG-GRY, #750,#751 1 1 22W-1007-WHT #845 22W-1007-PNK-GRN #578 6 6 22W-1007-PNK-GRN #767 22W-1007-YEL-RED #806 2 2 22W-1007-RED #847 22W-1007-RED #847 R FRONT INTERIOR - RED 22W-1007-PNK-BLU #579 7 7 22W-1007-PNK-BLU #768 22W-1007-YEL-GRN #808 3 3 22W-1007-GRN #849 22W-1007-GRN #849 G FRONT INTERIOR - GRN 22W-1007-PUR-RED #580 8 8 22W-1007-PUR-RED #769 39-01-3023 22W-1007-YEL-BLU #804 4 4 22W-1007-BLU #851 22W-1007-PUR-GRN #581 9 9 22W-1007-PUR-GRN #770 22W-1007-BLU #851 B FRONT INTERIOR - BLU 22W-1007-PUR-BLU #582 10 10 22W-1007-PUR-BLU #771 03-06-1042 03-06-2042 #744 #809 22W-1007-RED-ORG #586 11 11 22W-1007-RED-ORG #772 22W-1007-RED-GRN #587 12 12 22W-1007-RED-GRN #773 22W-1007-RED-BLU #588 13 13 22W-1007-RED-BLU #774 22W-1007-WHT-RED #583 14 14 22W-1007-WHT-RED #775 22W-1007-WHT-GRN #584 15 15 22W-1007-WHT-GRN #776 22W-1007-WHT-BLU #585 16 16 22W-1007-WHT-BLU #777 22W-1007-BLK-RED #589 17 17 22W-1007-BLK-RED #778 22W-1007-BLK-GRN #590 18 18 22W-1007-BLK-GRN #779 J J
39-01-2181 39-01-2180 22W-1007-BLU-ORG 22W-1007-ORG-GRN
22W-1007-BLK-BLU #591 1 1 22W-1007-BLK-BLU #780 22W-1007-BRN-RED #592 2 2 22W-1007-BRN-RED #781 22W-1007-BRN-GRN #593 3 3 22W-1007-BRN-GRN #782 22W-1007-BRN-BLU #594 4 4 22W-1007-BRN-BLU #783 22W-1007-BLU-RED #595 5 5 22W-1007-BLU-RED #784 22W-1007-BLU-GRN #596 6 6 22W-1007-BLU-GRN #785 22W-1007-BLU-BRN #597 7 7 22W-1007-BLU-BRN #786 22W-1007-GRY-RED #598 8 8 22W-1007-GRY-RED #787 /6.G1 22W-1007-GRY-GRN #599 9 9 22W-1007-GRY-GRN #788
From: Front Lower (7) 22W-1007-GRY-BLU #600 10 10 22W-1007-GRY-BLU #789 K [Front Main Connections] 18W-1007-GRN-YEL #564 11 11 22W-1007-GRN-YEL #790 K 22W-1007-BRN-PNK #662 12 12 22W-1061-BRN-PNK #761 22W-1007-BRN-PUR #663 13 13 22W-1061-BRN-PUR #762 14 14 39-01-3143 39-01-2140
CBL29 RED 1 1 CBL53 RED CBL29 BLK 2 2 CBL53 BLK CBL30 RED 3 3 CBL54 RED CBL30 BLK 4 4 CBL54 BLK F Designed: Date: REV JTN 2020.12.30 A ANSI D 39-01-3043 39-01-2040 E TITLE L D Raw Thrills, Inc. VR System Diagram L C 5441 Fargo Ave. rawthrills.com Front Main B Skokie, IL 60077 tel: 847.679.8373 DWG USA fax: 847.679.8538 INITIAL JTN 2020.12.30 A SHEET SHEETS DESCRIPTION BY DATE REV 7 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
A A
SPEAKER SPEAKER RGB LED Strip RGB LED Strip RGB LED Strip RGB LED Strip RGB LED Strip RGB LED Strip 2-1-10-00-00-000 2-1-10-00-00-000 FRONT LT + FRONT LT - FRONT LT FRONT RT + FRONT RT - 12V_F15 FRONT SPEAKERS - RED FRONT SPEAKERS - GRN FRONT SPEAKERS - BLU 12V_F15 FRONT INTERIOR - RED FRONT INTERIOR - GRN FRONT INTERIOR - BLU 12V_F15 FRONT INTERIOR - RED FRONT INTERIOR - GRN FRONT INTERIOR - BLU 12V_F15 FRONT INTERIOR - RED FRONT INTERIOR - GRN FRONT INTERIOR - BLU 12V_F15 FRONT INTERIOR - RED FRONT INTERIOR - GRN FRONT INTERIOR - BLU 12V_F15 FRONT SPEAKERS - RED FRONT SPEAKERS - GRN FRONT SPEAKERS - BLU - + - + + + + G G G R B R B R B + + + G G G B R B R B R B B 1 1 1 1 #862 #865 #868 #871 #863 #866 #869 #872 #864 #867 #870 #873 #885 #882 #879 #876 #884 #881 #878 #875 #883 #880 #877 #874 2-520181-2 2-520181-2 2-520181-2 2-520181-2 RED BLK RED BLK CBL55 CBL55 CBL56 CBL56 22W-1007-BLU 22W-1007-BLU 22W-1007-BLU 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-GRN 22W-1007-GRN 22W-1007-GRN 22W-1007-BLU 22W-1007-BLU 22W-1007-BLU 22W-1007-WHT 22W-1007-WHT 22W-1007-WHT 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-GRN 22W-1007-GRN 22W-1007-GRN 22W-1007-WHT 22W-1007-WHT 22W-1007-WHT
C C RED BLK #862 #865 #868 #871 #863 #866 #869 #872 #864 #867 #870 #873 #885 #882 #879 #876 #884 #881 #878 #875 #883 #880 #877 #874 RED BLK CBL55 CBL55 CBL56 CBL56 22W-1007-BLU 22W-1007-BLU 22W-1007-BLU 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-GRN 22W-1007-GRN 22W-1007-GRN 22W-1007-BLU 22W-1007-BLU 22W-1007-BLU 22W-1007-WHT 22W-1007-WHT 22W-1007-WHT 22W-1007-RED 22W-1007-RED 22W-1007-RED 22W-1007-GRN 22W-1007-GRN 22W-1007-GRN 22W-1007-WHT 22W-1007-WHT 22W-1007-WHT D D 03-06-2042 03-06-2042 03-06-2042 1 1 1 1 2 2 3 4 2 3 4 2 3 4 39-01-2020 03-06-2042 03-06-2042 03-06-2042 1 1 1 1 2 3 4 2 3 4 2 3 4 2 39-01-2020 [810-00405-01] [810-00405-01] [810-00402-01] [811-00166-01] [811-00166-01] [811-00166-01] [811-00166-01] [810-00402-01] 1 1 1 1 2 2 3 4 2 3 4 2 3 4 1 1 1 1 [811-00166-01] [811-00166-01] 2 3 4 2 3 4 2 3 4 2 RED BLK 39-01-3023 03-06-1042 03-06-1042 03-06-1042 03-06-1042 03-06-1042 03-06-1042 39-01-3023 RED BLK #745 #831 #830 #832 #747 #792 #798 #800 #746,#747 #791,#792 #797,#798 #799,#800 #752 #794,#805 #796,#807 #802,#803 #751,#752 #793,#794 #795,#796 #801,#802 #748 #828 #829 #833 CBL53 CBL53 CBL54 CBL54
E E 22W-1007-YEL-BLU 22W-1007-YEL-BLK 22W-1007-YEL-RED 22W-1007-YEL-GRN 22W-1007-YEL-ORG 22W-1007-YEL-GRY 22W-1007-YEL-BLU, 22W-1007-YEL-BLK 22W-1007-YEL-RED, 22W-1007-YEL-ORG 22W-1007-YEL-GRY 22W-1007-YEL-GRN, 22W-1007-YEL-BLU, 22W-1007-YEL-BLU, 22W-1007-ORG-GRY 22W-1007-ORG-GRY 22W-1007-YEL-RED, 22W-1007-YEL-RED, 22W-1007-YEL-GRN, 22W-1007-YEL-GRN, 22W-1007-ORG-GRY, 22W-1007-ORG-GRY 22W-1007-ORG-GRY 22W-1007-ORG-GRY,
From: Front Cabinet (PAGE-7) From: Front Main Cabinet (PAGE-7) [Front Main Left] [Front Main Right] F /7.D4 /7.I20 F
G G #812 #820 #836 #826 #726 #834 #827 #837 #821 #813 #727 #835 H H 22W-1007-BLK 22W-1007-RED 22W-1007-BLK 22W-1007-RED 22W-1007-BRN #729 #816 #823 #822 #811 #730 #817 #825 #824 #814 22W-1007-BLU-YEL 22W-1061-BLK-BRN 18W-1007-BLU-PNK 18W-1007-ORG-PUR 22W-1061-BLK-GRY 18W-1007-BLU-PUR 18W-1007-ORG-RED 39-01-3023 1 1 1 1 1 2 1 1 1 1 39-01-3023 1 2 2-520181-2 2-520181-2 2-520183-4 2-520183-4 2-520183-4 2-520183-4 2-520181-2 2-520181-2 1 2 3 4 4 3 2 1 1 2 1 [810-00396-01] 2 18W-1007-BLK [810-00396-01] 22W-1007-BLK SW-NO SW-NO 5V LED(-) LED(+) 5V LED(-) SW-COM LED(+) I SW-COM I GND GND 22W-1061-GRN-BLU 22W-1061-GRN-BLK 22W-1061-GRY-PNK 18W-1007-ORG-WHT 22W-1061-GRY-PUR 22W-1061-GRN-BRN 22W-1061-GRN-GRY 18W-1007-ORG-WHT 39-01-2020 #858 #861 39-01-2020 #859 #860 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 MOTION STOP LT MOTION STOP MOTION STOP RT MOTION STOP GND GND MOTION STOP LT LAMP LT MOTION STOP COIN 1 MOTION STOP RT LAMP MOTION STOP COIN 2 03-09-1094 03-09-1094 12V_F19 12V_F19 18W-1007-YEL 18W-1007-BRN 18W-1007-YEL 18W-1007-BRN P1 UCL P2 UCL 604-00022-01 604-00022-01 P1 E-TICKET DRIVE + 12V_F17 P2 E-TICKET DRIVE J P1 E-TICKET NOTCH 18W-1007-YEL #858 12V_F18 + J 18W-1007-YEL #859 P2 E-TICKET NOTCH
18W-1007-BRN #861 - P1 BLOWER P2 BLOWER - 18W-1007-BRN #860 BLOWER BLOWER
K K
F Designed: Date: REV 2020.12.30 ANSI D E JTN A TITLE L D Raw Thrills, Inc. VR System Diagram L C 5441 Fargo Ave. rawthrills.com Front Main Left / Right B Skokie, IL 60077 tel: 847.679.8373 DWG USA fax: 847.679.8538 INITIAL JTN 2020.12.30 A SHEET SHEETS DESCRIPTION BY DATE REV 8 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 KING KONG OF SKULL ISLAND VR CABINET ASSEMBLY
MAIN CAB UPPER RIGHT FRAME/601-00902-01 DECAL/606-01845-01 MOTION BASE CABINET (SEE MOTION BASE EXPLODED VIEWS FOR DETAILS) MAIN CABINET/601-00872-01 MAIN CAB UPPER LEFT RIGHT DECAL/606-01736-01 FRAME/601-00903-01 (SEE MAIN CAB EXPLODED DECAL/606-01846-01 VIEWS FOR DETAILS)
MAIN CAB WOOFER PANEL MAIN CABINET (SEE VIEW FOR DETAILS) LEFT DECAL/ 606-01737-01
MAIN CAB LOWER RIGHT FRAME/601-00889-01 DECAL/606-01847-01 MAIN CABINET FRONT DECAL/ 606-01738-01 SPACER CABINET 601-00893-01 (SEE SPACER CAB EXPLODED VIEW FOR DETAILS) MAIN CAB LOWER LEFT FRAME/601-00890-01 DECAL/606-01848-01 CABINET JOINER RIGHT BEAM ASSEMBLY WOOD BEAM/601-00898-01 STEEL BRACKET/600-02500-01 CABINET JOINER RIGHT BEAM DECAL/606-01943-01 LEFT BEAM ASSEMBLY ***ALL SCREWS MUST BE WOOD BEAM/601-00899-01 SECURELY TIGHTENED TO STEEL BRACKET/600-02501-01 ALL FOUR CABINETS FRONT CABINET/ RIGHT BEAM DECAL/606-01944-01 PRIOR TO OPERATION!!*** 601-00873-01 ***ALL SCREWS MUST BE SECURELY TIGHTENED TO FRONT CAB RIGHT (SEE FRONT CAB EXPLODED FRAME/601-00891-01 VIEWS FOR DETAILS) ALL FOUR CABINETS PRIOR TO OPERATION!!*** DECAL/606-01849-01 FRONT CAB LEFT FRAME/ 601-00892-01 DECAL/606-01850-01 55" UPPER LCD KING KONG OF RIGHT UPPER LED PLATE UPPER MID DISPLAY ASSEMBLY UPPER 55"MONITOR ILLUMINATION 600-02634-01 SEE EXPLODED VIEW BRACKET ASSEMBLY PANEL/603-01014-01 SKULL ISLAND VR SEE EXPLODED VIEW GRILL/600-02486-01 LEFT UPPER ILLUMINATION -MAIN CABINET- LED PLATE UPPER R&L (2) PANEL/603-01014-01 GRILL/600-02488-01 AIRFLOW OUT (4) 600-02633-01 GENERAL ASSEMBLY 12VDC 120MM FAN/820-00012-00 CENTER UPPER ILLUMINATION 43" LOWER LCD GUARD (8) PANEL/603-01013-01 UPPER BACK 800-00001-00 DISPLAY ASSEMBLY GRILL/600-02487-01 SEE EXPLODED VIEW DOOR DECAL/ 606-01894-01 2 OF EACH UPPER REAR ACCESS DOOR/ UNDER ARM 601-00885-01 CUSHION/ 600-02825-01 LEFT HEADSET ARM UNDER ARM ASSEMBLY/SEE EXPLODED VIEW SECURING NYLON INSERT ROD/ STRAP PLATE (4)/ 600-02826-01 600-00891-01 UNDER ARM RIGHT HEADSET ARM COVER PLATE/ ASSEMBLY/ SEE 600-02520-01 EXPLODED VIEW NO FANS-VENT ONLY 800-00001-00 FAN GUARD (2) DOOR LOCK/ LED LOWER PLATE R/ ILLUMINATION PANEL/ 150-00001-01 600-02635-01 603-01015-01 (3) TOTAL LED LOWER PLATE L/ ILLUMINATION GRILL/ RETAINER PLATE/ 600-02636-01 600-02503-01 LOWER BACK 600-00043-01 DOOR DECAL/ (2) TOTAL VR HEADSET/ 606-01898-01 AIR COMPRESSOR 809-00020-01 LOWER REAR A CONDENSATION TRAY MOTION SENSOR/ ACCESS DOOR/ 600-01437-01 820-00026-01 601-00885-01 TRAY SPONGE HARDWARE PCB ASSY- 603-01007-01 (2) DESKTOP PC RIO PLATE/600-02604-01 850-00031-01 RIO2/500-00199-05 AC AND COMPRESSOR 340-00001-01 AUDIO AMP/380-00010-01 DRIP TRAY PC HARDWARE ON/OFF SWITCH PLATE ACCESS DOOR/ 12VDC 120MM FAN TEST BRACKET/810-00053-01 ACCESS PLATE/ 600-01384-01 340-00001-01 AIRFLOW IN (2) 600-02499-01 601-00887-01 CAUTION DECAL/ 12VDC 120MM FAN 800-00001-00 606-01945-01 AIRFLOW OUT (2) FAN GUARD (4) 800-00001-00 ILLUMINATION PANEL DOOR HINGE/ AND GRILL 600-02496-01 FAN GUARD (4) (2) 12V/600W, AUTOSWITCHING, AIR COMPRESSOR AIR REGULATOR, AIR COMPRESSOR PFC, LOW LEAKAGE PSU ACCESS DOOR/ 330-00003-01 WATER FILTER / ILLUMINATION PANEL/ MOUNTING BRACKET (2) 601-00887-01 604-00046-01 600-02621-01 COMPRESSOR THERMAL 603-01015-01 CAUTION DECAL/ MONITOR PCB/500-00253-01 L BRACKET/ ILLUMINATION GRILL/ 606-01945-01 604-00046-01 COMPRESSOR THERMAL PCB 600-02502-01 AIR COMPRESSOR DOOR HINGE/ 15V/320W, AUTOSWITCHING MOUNTING PLATE/600-02789-01 604-00066-01 600-02496-01 LOW LEAKAGE PSU 330-00007-01 PC SHELF-REMOVABLE/ 8" WOOFER PANEL ASSEMBLY (2) SOLID STATE RELAY 601-00927-01 800-00040-01 4 ITEM NO. PART NUMBER DESCRIPTION QTY. 5 COMPRESSOR SHELF- 6 1 601-00901-01 VRK-MainCab-Woof Bezel 1 3 REMOVABLE/ 2 603-00718-01- LED Tmold Woofer 1 TOROIDAL 601-00936-01 TRANSFORMER 3 600-02578-01 VRK - LED Corner Bracket 4 2500VA 115/230VAC 8 4 606-01851-01 VR-Main Cab Addon Center 1 808-00002-01 5 603-00961-01 8 inch Woofer Ring-IM 1 2 6 2-1-18-00-00-000 8” Woofer, 4 Ohm 1 9 15 AMP POWER LINE FILTER/ 7 90631A009 NYLON-INSERT LOCKNUT 4 442-00003-01 1 8 92356A261 #8x1_CARRIAGE BOLT 4 LINE FILTER MOUNTING PLATE/ DETAIL A 600-02799-01 SCALE 1 : 12 9 96075A147 #8-32x1in Tamper Torx 4 ITEM NO. PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY. 1 600-02480-01 Upper LCD Bracket Assy 1 NO. NO. 55" LCD Monitor MT55W-887F3- 1 809-00004-01- 43" LCD Display- 1 2 600-02481-01 Monitor Pivot Bracket 1 1 809-00012-01 B-2017.03.22 (90-AP-413) 1 3 VR-55-LCD-ASSY ASSY-55-LCD-ALIENS 1 JP-55-LCD-FRAME 2 LCD Foam Tape 1/16"T X 3/4"W X 120"Total Length- 1 M6x25MM With Flat & 2 ASSY JP-55-LCD-FRAME ASSY 1 Black Foam Tape 4 M6x25MM Assy Lock/For 2 Lower Rear 2 Washer-Spacer- 3 600-00073-01 42" Tempered Glass Panel 1 Monitor Mounts Only 3 1/2 ID X 1 1/4 OD Washer 2 Monitor Bracket 42- 1_4-20x75-1_4 1_4-20x75-1_4 Nylok Nut- 4 608-00156-01 Monitor_Frame_Assy_Weldement 1 5 Nylok Nut-Washer Washer Assy 2 4 600-02796-01 55 LCD Hanger Bracket 1 M6x25MM With Flat & Lock/For 125blackfoamtape- 1/8" X 3/8"W X 2"L Black Foam Tape 1_4-20 x75 Screw w Lock 5 small Section 2 6 1_4-20 x75-Assy and Flat Washers 18 5 M6x25MM Assy 2 Lower Rear Monitor Mounts 2 Only 7 9600K52 1-1/2"_SBR RUBBER PUSH-IN 1 GROMMET 6 600-02797-01 55 LCD Rear Cover Bracket 1 8 Wire Strap 1" Wire Strap 2 43" LOWER MONITOR ASSEMBLY 7 #8-32 X 1_2 Assy #8-32 X 1_2 W FLAT WASHER 20 9 90631A009 NYLON-INSERT LOCKNUT 2 1_4-20 x75 Screw w Lock and 8 1_4-20 x75-Assy Flat Washers 4 LCD Bezel Assy- 10 55LCD LCD Bezel Assy For 55" LCD 1 90576A115_ZINC-PLATED CLASS 9 90576A115 8 STL NYLON-INSERT LOCKNUT 2 11 Edge Guard Rubber Edge Guard 2 1 10 600-01205-01 VERT FRAME RAIL 2 2 12 600-02804-01 Rear Monitor Panel Cover 1 3 11 600-01206-01 HORIZ FRAME RAIL 2 1_4-20 x75-Washer 13 Assy 1" x 1_4-20 x75-Washer Assy 8 14 606-01934-01 Caution-Operation Decal 1 55" UPPER MONITOR ASSEMBLY 15 606-01895-01 Monitor Bezel Printed -Rght 1 16 606-01896-01 Monitor Bezel Printed -Cent 1 17 606-01897-01 Monitor Bezel Printed -Left 1 2 11 18 600-02798-01 Monitor Bezel Mend Plate 2 3 4 55" UPPER MONITOR ASSEMBLY 5 1 WITH PIVOT BRACKET AND BEZEL
6 10 18 10 16 5 9 17 10
10 18 4 13 8
11
2 10 7 8 10 15 4 KING KONG OF
7 SKULL ISLAND VR 8 -MONITOR ASSEMBLY DIAGRAMS- NOTE-DO NOT ATTEMPT TO MOVE GAME OR PIVOT THE MONITOR 7 9 3 ASSEMBLY INTO THE DOWN POSITION WITH 55"MONITOR INSTALLED! 12 5 1 7 REMOVE 55" MONITOR AND BEZEL ASSEMBLY PRIOR TO TRANSPORTING! 6 600-01206-01 14 2 KING KONG OF * NOTE: 600-2485-01-A,-B,-C WELDED TOGETHER TO CREATE ONE PART. SKULL ISLAND VR ITEM NO. PART NUMBER DESCRIPTION QTY. -HEADSET ARM ASSEMBLY- 14 1 600-02485-01-A WELDED ASSEMBLY 1 (SHOWING RIGHT ARM) * * 2 600-02485-01-B WELDED ASSEMBLY 1 * 3 600-02485-01-C WELDED ASSEMBLY 1 RIGHT ARM BRACKET/ 6 7 600-02485-01 4 93560A180 93560A180_MCMASTER 3 (SHOWN HERE) 5 91236A738 91236A738_LOW-STRENGTH 2 LEFT ARM BRACKET/ 1 600-02540-01 8 (NOT SHOWN) 6 603-00974-01 Roto-molded Headset Arm 1 7 600-02598-01 Roto Arm LED Bracket (2) 1 8 500-00131-14in35cm 35cm LED Strip RGB 2 11 9 600-02535-01 Under Arm Access Plate 1 1/4-20_ZINC-PLATED GRADE 5 STL 13 10 95615A120 NYLON-INSERT LOCKNUT (2) 1 11 600-02624-01 Arm Illumination panel 2
5 12 600-02625-01 Arm Perforated plate (R2) 1 13 600-02626-01 Arm Perforated plate (L2) 1 21 11 PIN-IN-TORX BUTTON SOCKET CAP 14 91900A845 SCREW 12 10 24 15 1_4 LOCK WASHER 1/4" LOCK WASHER 12 90925A196_PAN HEAD TORX DRIVE 16 90925A196 SCREW FOR SHEET METAL 16 17 92105A100 1/4-20 TAPPING INSERTS 8 18 92105A002 #8-32 TAPPING INSERTS 4 19 97217A393 1/4-20 STEEL RIVET NUT FOR PLASTICS 4 14 12 20 809-00020-01-VR Virtual Reality Headset 1 15 27 29 9 28 30 21 600-02807-01 Arm Extension Bracket 1 16 26 VR Headset Cable 23 22 Assy See Cable Assembly Detail 1 1/4-20_BLACK-OXIDE ALLOY STEEL 22 23 91251A546 SOCKET HEAD SCREW 1 24 603-01051-01 Arm Extension Cap 1 25 96075A139 #8-32 x 1_2 TORX DRIVE SCREW 4 26 #8 FLAT WASHER #10 FLAT WASHER 4 20 27 606-01937-01 Arm Cap- P2 Left Decal 1 28 606-01938-01 Arm Cap- P2 Right Decal 1 Arm Cap- P1 Left Decal (not 29 606-01935-01 shown) 1 Arm Cap- P1 Right Decal (not 30 606-01936-01 shown) 1 KING KONG OF SECURE DOOR PANEL WITH 1/4-20 x 1 -1/2" SCREWS SKULL ISLAND VR LOCK AND FLAT WASHERS -SPACER CABINET- HOUSES MANIFOLD, AIR LINES AND WIRE HARNESS CONNECTIONS. 22.25in 56.51cm 8.25"H X 48"W X 24"D DOOR DIM DETAIL B SCALE 1 : 5
SPACER DOOR PANEL DECAL 606-01741-01 B SPACER DOOR PANEL HINGE 600-02497-01 46.38in 117.79cm DOOR DIM PRESSURE SENSOR SPACER DOOR PANEL- 500-00195-01 601-00894-01
SPACER DOOR PROP BAR BRACKET/ 600-02525-01 4 STATION AIR MANIFOLD/ 604-00045-01
SPACER DOOR PROP BAR/ 601-00900-01
8.25in 20.95cm CORNER REINFORCING BRACKETS/600-02498-01 4 REQUIRED
48.00in 24.00in 121.92cm 60.96cm
SPACER CABINET/ 2 1/2" CASTER 601-00893-01 800-00007-01 4 REQUIRED
4" LEG LEVELER 800-00004-01 4 REQUIRED SEAT ASSEMBLY NO STEP CAUTION DECAL/ (SEE EXPLODED VIEW) 606-01909-01 KING KONG OF MOTION STOP BUTTON ASSEMBLY SKULL ISLAND VR (SEE EXPLODED VIEW) HEALTH CAUTION DECAL/ 606-01908-01 -MOTION CABINET-
52"H X 49.5"W X 32.5"D STEEL HANDLE BAR (SEE EXPLODED VIEW)
Skirt Angle Bracket-B 600-02573-01 UPPER SHEET METAL 2 REQUIRED MOTION BASE BRACKET 608-00237-01 Skirt Long Side Hem Bracket 600-02569-01 8 REQUIRED NEOPRENE RUBBER SKIRT AND BRACKET Skirt Angle Bracket-Side ASSEMBLY 600-02574-01 2 REQUIRED Skirt Short Side Upper Hem Bracket-(White) 600-02571-01 LEFT SIDE RIGHT SIDE 2 REQUIRED SEAT SEAT 32in 81.50cm Skirt Short Side Hem Bracket 600-02570-01 2 REQUIRED
CABLE PASSAGE REIFORCED NEOPRENE Skirt Long Side RUBBER SAFETY SKIRTING LOWER MOTION 52.7in 600-02577-01 Hem Bracket Skirt Angle Bracket-A BASE ASSEMBLY 2 REQUIRED 600-02569-01 600-02572-01 133.75cm 8 REQUIRED 2 REQUIRED SHOWN IN MAXIMUM EXTENDED POSITION Distance Measuring 1.5X.75H RUBBER BUMPER AIR SPRING Sensor Unit/ W UNTHREADED HOLE MOUNTING PLATE 500-00175-01 MMC 9540K360/ 600-02575-01 4 REQUIRED 600-02837-01 2 REQUIRED 14 REQUIRED AIR SPRING 800-00074-01 4 REQUIRED 48in 24.00in 121.89cm 60.96cm LEG LEVELER BRACKET 600-01633-01 27in 4 REQUIRED 50.8in 68.14cm 129.10cm BRACKET-DISTANCE FLEXIBLE- SENSOR/600-01217-01 4" LEG LEVELER FLEXIBLE- VARIABLE 4 REQUIRED 800-00004-01 VARIABLE DIMENSION 4 REQUIRED DIMENSION DISTANCE SENSOR C ASSEMBLY 2 1/2" CASTER 4 REQUIRED 800-00007-01 LOWER SHEET METAL 4 REQUIRED DETAIL C MOTION BASE BRACKET SCALE 1 : 2 608-00236-01 ITEM NO. PART NUMBER DESCRIPTION QTY. ITEM NO. PART NUMBER DESCRIPTION QTY. 1 603-00523-01 ROTO MOLDED SEAT-RED 1 1 600-02593-01-ASSM TBar Support Weldment 1 2 600-02521-01 VR-Seat Box 1 Motion Stop Button 2 Assy SEE EXPLODED VIEW 1 3 807-00003-00 6 1/2" WOOFER SPEAKER 1 3 600-02609-01- EDGE MOLDING 2 4 600-00106-01- REAR SEAT WOOFER GRILL 1 4 92949A591 5/16-18 BUTTON HEAD HEX DRIVE 2 5 600-01840-01- CLEAR PETG OVERLAY 1 SCREW 6 606-01745-01 Seatback Translight 1 10-32-X3/4 PIN-IN-TORX BUTTON 5 91900A829 SOCKET CAP SCREW 4 7 500-00162-01-86CM WHITE LED STRIP-SEAT ILLUMINATION 1 RUBBER BUMPER WITH UNTHREADED 6 9540K36 HOLE 2 8 807-00010-00 3-1/2" Full Range Speaker 2 7 600-02596-01 AP-732_LEAP BAR 1 8 600-02752-01 T-Bar Grip (2) Req'd 2 9 807-00014-00 3 1/2" Speaker Grille 2 9 TORX 1-1_4 TORX 1-1/4 INCH, LOCK AND FLAT 2 10 500-00204-01 RED SUPERPUCK LED LIGHT 2 WASHER 11 603-00047-01 LED Spotlight Lens 2 90925A196_PAN HEAD TORX DRIVE 12 90925A196 SCREW FOR SHEET METAL 2 KING KONG OF 13 600-01886-01 Seat Blockout Plate 1 SKULL ISLAND VR 8 -HANDLEBAR ASSEMBLY-
5 6 7 KING KONG OF 9 8
SKULL ISLAND VR 6 3 -SEAT ASSEMBLY- 9 3 (2) REQUIRED 7
4 MOTION STOP BUTTON 6 12 4 ASSEMBLY 4
9 13 MOTION STOP 3 BUTTON 5 702-00071-01 8
D 1 11 2
10 MOTION STOP BUTTON PLATE 1 600-02603-01 MOTION STOP DECAL 2 606-01788-01 DETAIL D SCALE 1 : 6 Hood - Stand Back Decal Small DASH TOP DECAL Rectangle (2)/ DO NOT CLIMB TRAPAZOID/ 606-01940-01 BACKLIT ILLUMINATED 606-01939-01 Front Vac Form WHITE PANELS Upper Bracket 603-01010-01 DASH TOP/ 600-02510-01 603-01011-01 (2) BACKLIT ILLUMINATED 600-02509-01 603-01012-01 (2) GRILL PANELS 600-02512-01 BLOWER MOTOR (2)/ 600-02513-01 604-00022-01 600-02515-01 MOUNTING BRACKET (2)/ 600-02516-01 600-02536-01 600-02517-01
5 1/4" SPEAKER (2)/ 2-1-10-00-00-000
MOTION STOP BUTTON (2)/ 702-00071-01
RGB LED LIGHTED SPEAKER BEZEL ASSEMBLY (2)/ BEZEL/603-00890-01 RGB LED (2)/500-00245-01 SPEAKER GRILL (2)/ 600-02154-01 CLEAR PLASTIC LENS COVERING 600-02514-01 LOCKING VAULT DOOR LED T-MOLD AND HOUSING ASSEMBLY END BRACKET/ (DBV'S NOT INCLUDED)/ 600-02537-01 600-02508-01 BACKLIT GRAPHIC DBV BLANKING PLATE/ ILLUMINATED ART 600-02829-01 606-01750-01
RIO MINI PLATE/ VACUUM FORMED 600-02620-01 NOSE COVER RIO PCB/ FRONT VAC FORM 603-00972-01 500-00199-01 SIDE BRACKET/ 600-02511-01 P1DBV DECAL/ ALUMINUM 606-01910-01 TREADPLATE/ (INCLUDED IN PARTS BAG) 600-02505-01 GRILL/ HEADSET ADJUST DECAL/ 600-02512-01 LED T-MOLD 606-01907-01 21DBV DECAL/ BRACKET/ 606-01911-01 WHITE PANEL/ GRILL/ 600-02578-01 (INCLUDED IN PARTS BAG) 603-01010-01 600-02515-01 FLOOR DECAL/ WHITE PANEL/ 606-01942-01 BLOWER GRILL (2)/ 603-01011-01 LED T-MOLD 600-02605-01 END BRACKET/ DASH DECAL/ GRILL/ SUBFLOOR DECAL PLATE/ 606-01749-01 600-02828-01 600-02538-01 600-02513-01 WHITE PANEL/ DOOR LOCK 603-01011-01 HEADSET FACE MASK 150-00001-01 DISPENSER ASSEMBLY CARD READER MOUNTING LOCATION (3) TOTAL FACE PLATE/600-02622-01 REMOVE HOOD AND CHECK FOR INTERFERENCE FACE DESPENSER/600-02631-01 WITH ADJOINING PANELS, BRACKETS AND CABLES. DISPENSER TRAY/603-01017-01 DRILL THROUGH PANEL AS PER MANUFACTURERS SPECIFICATIONS.
(CARD READERS NOT INCLUDED). GRILL/ 600-02516-01 WHITE PANEL/ 603-01012-01
42.59in CLEAR LENS/ GRILL / KING KONG OF SKULL ISLAND VR 49.5in 108.17cm 600-02514-01 600-02517-01 125.76cm ILLUMINATED ART/ WHITE PANEL/ FRONT CABINET 606-01750-01 603-01012-01 43"H X 49.5"W X 42.5"D LEFT SIDE KING KONG OF SKULL ISLAND VR WEIGHTS AND DIMENSIONS REAR FRONT 114.25" H x 58.25" W x 122.25" D 58.38in Approximate Assembled Weight 148.28cm 55" LCD 1500 lbs MONITOR REMOVE UPPER MONITOR WITH AND ROTATE BRACKET RIGHT SIDE BEZEL BACKWARDS FOR MOVING AND SHIPPING
55" UPPER MONITOR
FOLD ARMS DOWN FOR 114.14in SHIPPING 43" LOWER MONITOR 289.91cm OPERATING POSITION 32.1in VR-KONG FULLY 81.42cm ASSEMBLED 79.75in 202.56cm SHIPPING / 52.19in MOVING 132.57cm DIMENSION MONITOR CABINET- (REMOVE 100LB TOP MONITOR ASSY 42.97in BEFORE MOVING OR SHIPPING)! 109.15cm 79.75"H X 49.5"W X 32.25"D 800 LBS (FULLY ASSEMBLED AFTER UPPER MONITOR INSTALLED).
SPACER CABINET- 49.56in 32.25in 42.49in HOUSES AIR MONIFOLD 125.88cm 81.92cm 107.91cm AND ALL AIR LINE CABINET MONITOR FRONT CONNECTIONS. WIDTH CABINET 24.00in 23.94in CABINET 60.96cm 60.80cm 8"H X 48"W X 24"D SPACER MOTION 100 LBS EST CABINET BASE
MOTION BASE CABINET 52"H X 49.5"W X 32.5"D 49.56in 300 LBS EST 125.88cm
FRONT CABINET 43"H X 49.5"W X 42.5"D 300 LBS EST CABINET JOINER 122.26in BEAMS- RIGHT (NEAR) 310.55cm AND LEFT (FAR) OVERALL 20 LBS EACH ASSEMBLED