9th EASN International Conference on Innovation in & Space

Preliminary Programme • Detailed sessions & abstracts

DAY 1|03.09.2019 Main author / coordinator Abstract Title Abstract ID ROOM 1 10:45 Industry 4.0 in Aeronautics Part I 15:00 Industry 4.0 in Aeronautics Part II Chair: Dr. R. Reis, Embraer, Portugal Robert Goraj Digital Twin Of The Rotor-Shaft Of A Light Weight Electric Motor During Aerobatics Loads 13 Sascha Gierlings Next Generation Product(Ion)..!? Manufacturing Turbomachinery Components In A Digital Environment 84 Maurice Pelt Data Analytics Case Studies In The Maintenance, Repair And Overhaul (Mro) Industry 230 Miguel Angel Castillo Energy efficiency in aeronautic production through industry 4.0 implementation 325 Ricardo J.N. dos Reis FASTEN: EU-Brazil cooperation in IoT for manufacturing. Embraer use case 363 Rafael Arrais On the application of a Cyber-Physical Systems framework for Industry 4.0 in Aerospace and Automotive Industries 366 Michele Sesana Collaborative Augmented worker and Artificial Intelligence in Zero defect Manufacturing environment 367 João Basto An IIoT-based architecture for decision support in the aeronautic industry 382 Fenareti Lampathaki Digital Transformation in Aeronautics through the ICARUS Aviation Data and Intelligence Marketplace 389 Sergio Gusmeroli Industry 4.0 in Aeronautics: challenges and experiences in EU-funded projects 407 Adrian Singer Linked Data Architecture for Assistance and Traceability in Smart Manufacturing 409 ROOM 2 10:45 Support Actions for coordinating Research in the field of Aviation Chair: Dr. M. Kyriakopoulos and Dr. D. Violato European Commission / INEA Reiner Suicat RINGO: Research Infrastructures Needs, Gaps and Overlaps - I n/a Reiner Suicat RINGO: Research Infrastructures Needs, Gaps and Overlaps - II n/a Reiner Suicat RINGO: Research Infrastructures Needs, Gaps and Overlaps - III n/a Gerhard Pauly RADIAN: Facilitating Collaboration in ReseArch and Development to Foster Further Innovation in European AeroNautics n/a Guy Gallic ICARE: International Cooperation in Aviation Research n/a Luiz Manuel Braga da Costa Campos PARE: Perspectives for the Aeronautical Research in Europe 425 Giles Brandon AERO-UA: Strategic and Targeted Support for Europe-Ukraine Collaboration in Aviation Research n/a 15:00 Support Actions for coordinating Research in the field of Aviation Chair: Dr. M. Kyriakopoulos and Dr. D. Violato European Commission / INEA George Smyrnakis TRA Visions: Transport Research Arena 2020 381 Gerhard Pauly OSCAR: Open ScienCe Aeronautic and Air Transport Research n/a Martin Spieck Open Science in Aeronautic and Air Transport Research: Why Bother? 415 Afroditi Anagnostopoulou Be Open: Open Science in transport research 404 Afroditi Anagnostopoulou Be Open: Open Science in transport research II n/a ROOM 3 10:45 R&D Research in the Field of Aeronautics and Air Transport - STRATOFLY Session Chair: Dr. N. Viola, Politecnico di Torino, Italy Volker Grewe The Climate Impact Of Hypersonic Transport 100 Marco Marini Aero-Propulsive And Flight Control System Analysis Of The Stratofly Hypersonic Cruiser 268 Roberta Fusaro Analysis Of The Thermal And Energy Management System For Stratofly Mr3 Vehicle 288 Roberta Fusaro Stratofly Mr3 Vehicle Design And Subsystems Integration 289 Nicole Viola Main Challenges And Goals Of The H2020 Stratofly Project 290 Ali Can Ispir Analysis Of Combined Cycle Propulsion System For Stratofly Hypersonic Vehicle Over An Extended Trajectory 304 Roberta Fusaro High speed air travel: safety and legal challenges of future spaceports and aerodromes 394 15:00 STRATOFLY Academy Chair: Dr. N. Viola, Politecnico di Torino, Italy ROOM 4 10:45 Hybrid-Electric Flight Part I 15:00 Hybrid-Electric Flight Part II Chair: Prof. A. Strohmayer, University of Stuttgart, Germany Alessandro Sgueglia Exploration And Optimization Of A Blended Wing-Body Concept Featuring Distributed Electric Propulsion With Gradient Optimization Techniques 33 Jos Vankan Parallel Hybrid Electric Propulsion Architecture For Single Aisle - Powertrain Investigation 96 Richard Glassock Electric Skydiving Aircraft 162 Richard Glassock Air Race E: Electric Racing Aircraft 163 Nikola Žižkovský Design Of Distributed Propulsion System For General Aviation Airplane 164 Piotr Czarnocki Electric Motor-Glider Powered By A Hydrogen Fuel Cell Stack 223 Nikola Žižkovský Wing-Propeller Interaction 308 Teresa Donateo An application of ECMS strategy to a Wankel Hybrid Electric UAV 410 Semyon Mikhalyov The Effect Of The Propellers Slipstream Of Distributed Electric Propulsion On The Wing- System 26 Dominique Paul Bergmann Propeller-Technology Testing With Uas - Concept Of Pod And In-Flight Measurement System 49 Hagen Kellermann Assessment Of Aircraft Surface Heat Exchanger Potential 149 Emma Frosina Design and Development of Hybrid-Electric Propulsion Model for Aeronautics Ext19 ROOM 5 10:45 Advanced Forming and Machining for Aeronautics Part I 15:00 Advanced Forming and Machining for Aeronautics Part II Chair: Prof. Y. Qin and Dr. Q. Zeng, University of Strathclyde, UK Kunlan Huang Effect Of Heating Rate On Micro-Formability Of Ti6al4v Alloy Under An Electrical Field 103 Felusiak Agata Cutting Force Prediction In Orthogonal Turn-Milling Of Inconel 718 129 Xiaoyu Liu Springback Prediction Of Micro W-Bending Using Support Vector Machine And Bp Neural Network 206 Jie Zhao Critical Cooling Of Aluminium Blanks For Hot Stamping 291 Quanren Zeng Laser Metal Deposition Additive Manufacturing For High-Value Components In Aerospace 298 Wenlong Chang Development Of Anti-Icing Micro Texturing Structures On Titanium Alloy By A Nanosecond Laser 306 Chao Zhang Research on Titanium Alloy Material-TC4 Grinding Technology in Aeroengine 344 Yao Sun Experimental research on machining micro holes of DD5 nickel-based single crystal superalloy by spiral microelectrode 351 Tao Yu Material removal mechanism of three-dimensional ultrasonic vibration assisted polishing 380 Quanren Zeng Experiences with a systematic framework for simulating laser-assisted manufacturing process Ext4 Eleni Andreou Electroforming of large-scale nickel structures for leading-edge energy, aerospace and marine applications Ext15 Sara Bagherifard Additive Manufacturing of Heterogeneous Structures by Cold Spray Deposition Ext18 ROOM 6 10:45 R&D Research in the Field of Aeronautics and Air Transport - SMS Session Chair: Dr. M. Braza, CNR, Italy P. Flaszynski Aerodynamic performance through morphing and vibrating trailing-edge of the A320 wing in transonic speeds n/a M. Carvalho Electroactive morphing effects in the aerodynamic performance of a cambered A320 wing by means of time-resolved PIV n/a N. Simiriotis High-Fidelity Numerical simulation of a morphing A320 wing in subsonic speeds and sensitivity evaluation n/a A. Marouf Aerodynamic performance increase of a morphing A320 wing with high-lift flap by means of Hi-Fi CFD approaches n/a A. Giraud Large-scale high-lift morphing flap by means of electromechanical actuators for take-off/landing n/a J.B. Paris Multi-point sensing by dynamic pressure measurements through Bragg grating applied in the SMS project n/a 15:00 R&D Research in the Field of Aeronautics and Air Transport - FLEXOP Session Chair: Dr. B. Vanek, Hungarian Academy of Sciences, Hungary Bálint Vanek Overview Of The Flexop H2020 Project 63 Sendner, Franz-Michael Flexop Work Package 1 - Aeroelastic Tailoring Methods For Wing Design And Preliminary Design Of A Subscale Flying Demonstrator 102 Sebastien Blanc Assessment, Validation, and Scale-Up Issues related to the FLEXOP 416 Sebastian Koeberle Building And Testing A Flutter Management Demonstrator Within The Flexop H2020 203 Andres Marcos Flutter Prediction and Control Design Methods within the FLEXOP H2020 Project 412 ROOM 7 10:45 Space Launchers and Space Navigation Part I 15:00 Space Launchers and Space Navigation Part II Chair: Prof. O. Pleter, Politehnica University of Bucharest, Romania Ainslie D. French Comparison Of Reactive Flow Simulations For A Lox/Ch4 Multi-Element Rocket Engine 188 Adrian-Mihail Stoica A Discrete-Time Kalman Filtering Method For Launch Vehicle Under Parametric Modelling Uncertainty 209 Octavian Thor Pleter Cold Start Xnav Feasibility For Deep Space Navigation 221 Constantinescu Cristian Emil A Reactive Control System For A Partially Guided Small Sounding Rocket 222 Alexandru Pandele Cots Based Gnss Receiver With Precise Point Positioning For Cubesats 239 Sterian Danaila A Reduced Order Model Based On Large Eddy Simulation Of Turbulent Combustion In The Hybrid Rocket Engine 250 Florin Mingireanu Versatile Microlauncher Using Solid Propulsion And Minimal Guidance Scheme 252 Ene Costin Robust Control Design For Micro Launcher Nonlinear Dynamics 262 Sergiu-Stefan Mihai Improving Gnss Positioning Of Satellites Using Artificial Neural Networks 273 Laurentiu Moraru Notes Regarding The Modeling Of The Angle Of Attack 301 Marius Stoia-Djeska Sensitivity Analysis On The Aeroelastic Static And Dynamic Stability Of Slender Launchers And Missiles Using A Reduced Order Model 303 Teodor-Viorel Chelaru Flexible Model for Miro-launcher Dynamics 335 Teodor-Viorel Chelaru Wind Influence on Miro-launcher Dynamics Model 336 Valentin Pana ADCS design for CubeSat satellites 390 ROOM 8 10:45 - 17:00 AIRPOXY project internal meeting

DAY 2|04.09.2019 Main author / coordinator Abstract Title Abstract ID ROOM 1+117:117:205 11:00 The regional dimension of Clean Sky: Innovation and Technologies created in the European aeronautics regions 14:30 The regional dimension of Clean Sky: Innovation and Technologies created in the European aeronautics regions 16:45 The regional dimension of Clean Sky: Innovation and Technologies created in the European aeronautics regions Chair: Dr. C. Vasilakos, Clean Sky JU, Belgium J. Zurbitu CJSU 2 project | TEST-inn: Test-Innovative Load Application Monitoring Systems 51 A. Tripitsidis CSJU 2 Project | ASCENT: Active Simulator Cockpit Enhancement n/a Tomáš Kratochvíla CSJU 2 Project | Automation of formal verification 130 Calum Scullion CSJU 2 Project | DEPART2050: Environmental And Mobility Benefits Of Coaxial Compound Rotorcraft Configurations 141 Enrique Aymerich CSJU 2 Project | DIGESTAIR: Chemical composition and potential biomethane production of waste generated on board 418 Marco Cappella CSJU 2 Project | Door to Door (DoDo) 292 bogdan gherman, CSJU 2 Project | DORIC: Development Of Research Infrastructure For Combustors 27 Miguel Angel Castillo CSJU 2 Project | GRECO: Manufacturing technology and tooling development for continuous manufacturing preform cutting and compaction with dry fiber composite material 321 Urko Esnaola CSJU 2 Project | GRECO: Drilling and Sanding With A m ultipupose Mobile Dual-Arm Robot 379 Georgios Bolanakis CSJU 2 Project | INTELLICONT: Automating Loading and Locking of New Generation Air-Cargo Containers 365 S. Corcione CSJU 2 Project | IRON: Feasibility Study Of Innovative Regional Turboprop 229 Danilo Ciliberti CSJU 2 Project | IRON: Powered Wind Tunnel Tests Setup Of The Iron Innovative Turboprop Aircraft 264 Mr. Mauro Borrelli CSJU 2 Project | MIB: Modular Iron Bird Abstract - Equipment Test Lab 101 Miguel Angel Castillo CSJU 2 Project | MULTIDRILL: New Multi-Material Drilling Conditions 322 Raquel Rodriguez CSJU 2 Project | MULTIDRILL: Two-Component Epoxy sel-Healing Adhesive throught The Incorporation of “All In One” Microcapsules 326 Filomena Piscitelli CSJU 2 Project | SAT-AM: Superhydrophobic coatings as anti-icing systems for small aircrafts 354 Massimo Viscardi CSJU 2 Project | SPAIN: A New Concept Of Insulation Package For A Small Turboprop Aircraft 225 Dr. Alexandra Karanika CSJU 2 project | DECOA: New Effective And Environmentally Friendly Technologies For Metallic Aircraft Parts 91 ROOM 2 11:00 Support Actions for coordinating Research in the field of Aviation - RADIAN Final event Part I 14:30 Support Actions for coordinating Research in the field of Aviation - RADIAN Final event Part II Chair: Mr. G. Pauly, Fraunhofer IFAM 16:45 Sustainable Development Opportunities Chair: Mr. A. Koetter, ALTRAN Adrian Singer Linked Data Architecture for Assistance and Traceability in Smart Manufacturing n/a Mara Fuchs A multi-disciplinary design optimization of the passenger service unit in the 324 Christine Thiede Sustainability Driven Product Development in Aviation 343 Vincent Ackenhausen Blockchain as a smart bridge between disconnected IT systems 362 tba n/a ROOM 3 11:00 R&D Research in the Field of Aeronautics and Air Transport - FUTURE Sky Session Chair: Mr. M. Piers, NLR Bruno Sainjon / M. Lesturgie An Introduction To The Future Sky Program 213 Marcello Kivel Mazuy An Introduction to the Future Sky Energy Initiative n/a Laurent Leylekian Renewed Prospects For Research On Quiet Air Transport In Erea’s Future Sky 243 Michel Piers/Lennaert Speijker Future Sky Safety Ext2 Ligeia Paletti EREA Future Sky Circular Aviation Workshop Ext12 Christian Eschmann Future Sky Urban Air Mobility (FS UAM) Ext17 14:30 RUMBLE session Chair: Mr. J-F Perelgritz, Airbus Group Innovations, France Finn Løvholt Low Frequency Sound Transmission Into Buildings And Induced Vibration Due To Sonic Boom 106 Roman LECONTE Sensitivity Of Sonic Booms To Parameters Of Atmospheric Turbulence 107 Andrey Kazhan To The Issue Of Evaluating Sonic Boom Overpressure And Loudness 112 Léo CRETAGNE Design Of Sonic Boom Simulators For Low Boom Perception Studies 233 16:45 RUMBLE Open Workshop Chair: Mr. J-F Perelgritz, Airbus Group Innovations, France ROOM 4 11:00 Civil Supersonic Transport Chair: Dr. C. Nae, EREA/INCAS, Romania Stefan Kazula Evaluation Of Variable Pitot Inlet Concepts For Transonic And Supersonic Civil Aviation 39 Stefan Kazula Parametric Design Study On Aerodynamic Characteristics Of Variable Pitot Inlets For Transonic And Supersonic Civil Aviation 40 Catalin Nae Tailless Configuration For A New Generation Sst 228 12:00 Aerodynamic Analysis and Design Part I 14:30 Aerodynamic Analysis and Design Part II 16:45 Aerodynamic Analysis and Design Part III Chair: Prof. J. Zoltak, ILOT, Poland Chun-Chi, LI Study Of Aero-Thermal Effects Of Different Heat Boundary Conditions On Optical Side Window In Hpersonic Flow 20 Cezary Galinski Design And Optimisation Of Flat-Upper-Surface Airfoil 65 Wojciech Grendysa Optimization Of The Three-Segment Aerofoil Arrangement Based On Wind Tunnel Tests And Numerical Analysis. 99 MARCIN FIGAT Numerical Investigation Of Mutual Interaction Between A Pusher Propeller And A Fuselage 119 Adam Sieradzki Design Method Of A Distortion Gauze For Testing The Boundary Layer Ingesting Fan 120 Pavel Hospodář Comparison Of Aerodynamic Characteristics Provided By Wing With Bell Shaped Lift Distribution And Generalized Wings 144 Hasier Goitia Nonlinear Vortex Lattice Method For Stall Prediction 165 Nuno Vinha Evaluation Of Vortex-Blade Interaction Utilizing Flow Feature Detection Techniques 187 Mitridis D. On A Novel Technique For Hypersonic Vehicle Control 218 Przemyslaw Drezek Multi-Objective Surrogate Model Based Optimization Of The Small Aircraft Engine Air-Intake Duct 277 Pawel Ruchala Scaling Of Helicopter Rotor Slipstream In The Ground Effect 286 Aleksander Olejnik The Concept And Methodical Assumptions For The Development Of A Dynamically Scaled Aircraft Model (Unmanned Or Passenger Aircraft) 315 WIENCZYSLAW STALEWSKI Investigations of the Vortex Ring State on a Helicopter Main Rotor Based on Computational Methodology Using an URANS Solver 361 Maria Grazia De Giorgi Comparison of numerical predictions of the supersonic expansion inside micronozzles of micro-resistojets, using different propellants 428 Jacques Periaux Advanced Multi-Level Hybridized Optimization Methods coupling Local Search and Global search Evolutionary Algorithms. Applications to the design of a hypersonic air breathing vehicle Ext14 ROOM 5 11:00 Aircraft Trajectory Control and Management Part I 14:30 Aircraft Trajectory Control and Management Part II 16:45 Aircraft Trajectory Control and Management Part III Chair: Prof. T. Rogalski, Rzeszow University of Technology, Poland D. Rzonca Computational Complexity Of Flight Planning Algorithm For Free Routing Airspace 60 Tomasz Rogalski Trajectory Control During Aerobatic Flight 98 Leszek Rolka Multi-Criteria Decision-Making In Planning Aircraft Trajectory In Free Route Airspace 116 Sebastian Delgadillo Pulse Calibrator Device Of The Encoder For Radars 117 PhD, Eng. Piotr Ciecinski Landing Control Verification Using Airplane Simulation Model 121 Piotr Grzybowski Route Difficulty And Estimated Length Assessment Used For Emergency Destination Evaluation 155 Piotr Grzybowski Flight Reconfiguration System - Emergency System Of Future 167 Javier A. Pérez-Castán How Many Rpas Can Be Safely Integrated In Non-Segregated Airspace? 185 Alvaro Rodríguez-Sanz Air Traffic Management Based On 4d-Trajectories: Requirements And Practical Implementation 202 Marc Lesturgie Gics , A New Concept To Enhance In-Flight Safety And Security Of Commercial Aviation 214 Andrzej Majka An Efficient Aircraft Path Planning Method At Free Route Airspace 238 Andrzej Majka A Multi-Dimension Weighted Graph-Based Aircraft Path Planning At Free Route Airspace 241 Michał Kuźniar Determination Of The Flight Trajectory In Terms Of Emission And Fuel Consumtion Minimisation. 246 Daniel Lichoń The Performance Model Of The Light Unmanned Aircraft For The Purpose Of Simulations Of The Departure And Arrival Procedures Execution In Controlled Air Traffic 272 Daniel Lichoń Modeling And Validation Of The Reference Departure And Arrival Procedures In The Context Of Integration Of The Unmanned Aircraft In Controlled Air Traffic 275 ROOM 6 11:00 Non-destructive Testing and Structural Health Monitoring of Aircraft structures Part I 14:30 Non-destructive Testing and Structural Health Monitoring of Aircraft structures Part II Chair: Prof. E. Jasiuniene, Kaunas University of Technology, Lithuania Lina L.Sartinska Formation Of New Architecture Of Boron Based Composite Powders Under Effect Of Concentrated Light For Nano-Enabled Composites 52 Smagulova Damira Disbond Detection Of Adhesively Bonded Metal To Composite Joints Using Different Ultrasonic Techniques 53 Krzysztof Dragan Techniques For Pzt Transducers Integration With Composite Structures For Enhanced Structural Health Monitoring Capabilities 118 Sergey Gartsev Possible Application Of Rayleigh Wave Scattering For The Surface-Treated Structural Elements Characterization 184 Helge Pfeiffer Reducing Complexity In Structural Health Monitoring By Percolation Threshold Sensors 191 Sevilia Sunetchiieva Structural Health Monitoring System For Moisture Ingress Detection In Sandwich Composite Structures 192 Neha Chandarana Active And Passive Damage Monitoring In Composites Using Embedded Piezoelectric Sensors 259 Jaishree Vyas Non-Destructive Testing And Evaluation For Carbon Fibre Epoxy Bonded Laminates Using Ultrasonic Measurement Techniques 278 Michael Stamm The Detection Of Melting Ice In Fuel Tanks By Acoustic Emission 310 Michael Stamm Towards Ultrasonic Stimulated Thermography As A Standard Aircraft Maintenance Tool 311 Tetiana Maslak New Criterion for Aircraft Multiaxial Fatigue Analysis 346 Konstantinos Gryllias Advanced signal processing tools for helicopters’ future Health and Usage Monitoring Systems (HUMS) 356 16:45 Impact of Composite Structures Chair: Prof. D. Saravanos, University of Patras, Greece and Prof. A. Christoforou, Kuwait University, Kuwait Andreas P. Christoforou Dynamic Response And Damage Characterization Of Impact In Composite Structures Through Non-Dimensional Parameters 50 Vasilis Votsios Development Of Composite Propeller Blade Model For High Velocity Impacts On Aircraft Fuselage Using Finite Element Analysis 87 Dimitris K. Siorikis A Strain-Rate Dependant Micromechanical Finite Element Model For High-Velocity Impacts On Laminated Composite Plates 253 Efthimios Giannaros The Road Map For Analysis Of Composite Helicopter Engine Cowl Against Bird Strike 281 M.A. Gomes Impact Damage On Al-Alloys And Composite Materials For Aircraft Fuselage Usage 312 Natalia Smetankina Simulating of Bird Strike on Aircraft Laminated Glazing 357 Farid Abed Dynamic Response of Basalt Fiber-Reinforced Polymer (BFRP) Composites under Drop-Hammer Tests 360 11:00 Innovative Manufacturing Techniques for Aircraft Component Part I Chair: Mr. J. Medina Gonzalez, Airbus Group, Spain C. Pirozzi Mechanical Characterization Of Ti6al4v Processed By Ebm 11 Dr. Federico Martin de la Escalera Residual Stresses And Springback Predictive Model 14 Federico Martin de la Escalera Hail Impact Model For Hybrid Laminar Flow Control (Hlfc) Structure 15 Federico Martin de la Escalera Numerical Modelling Of Aerospace Structure Subjected To Lightning Strike Phenomenon 17 Jordi Brufau Redondo A+ Glide Forming: A New Automated Process For Stringer Manufacturing 143 Shichao Xiu Mechanism Study Of Dynamic Hardening Process On Ground Aerostructure Workpiece’s Surface Topography 313 Liaoyuan Chen Research on circular thin-walled parts fabricated in additive manufacturing using laser engineered net shaping 341 14:30 R&D Research in the Field of Aeronautics and Air Transport - SARAH Session 17:00 R&D Research in the Field of Aeronautics and Air Transport - SARAH Session and NHYTE Session Chair: Dr.-Ing. S. Adden, IBK, Germany / Dr. M. Barile, Novotech, Italy Emanuele Spinosa Scaled Model Experiments Of The Ditching Phase 270 Alessandro Del Buono A Fully-Nonlinear Potential Flow Model For Aircraft Ditching Applications 300 Thomas Rung Aircraft Ditching Simulation With Ditch 316 Maximilian Müller Prerequisites for the accurate prediction of hydrodynamic impact loads in mesh-based ditching simulations 384 Jendrik Seiler Novel energy absorbing concepts for ditching scenarios 392 Stephan Adden SARAH: INCREASED SAFETY AND ROBUST CERTIFICATION FOR DITCHING OF AIRCRAFTS AND HELICOPTERS 395 Malte Woidt Development of structural fuselage models for numerical analysis of aircraft ditching events 413 Séverin HALBOUT SARAH - Some outcomes Contributing to Helicopter ditching 419 Jeremy Ohana Experimental testing of helicopter ditching in waves, from specifications to tests Ext13 Marco Barile Development Of A Novel Thermoplastic Based Composite Material By In-Situ Consolidation Automated Fiber Placement Process 127 Ch.V.Katsiropoulos A New Objective Function For The Optimization Of An Aeronautic Structure With Regard To The Component Quality, The Life Cycle Costs And Environmental Performance 204 Panagiota Polydoropoulou Induction welding process simulation of thermoplastic materials 391 ROOM 8 11:00 AIRPOXY project internal meeting 14:30 R&D Research in the Field of Aeronautics and Air Transport - AIRPOXY Session Chair: Ms N. Markaide, CIDETEC, Spain and Dr. T. Flanagan, EIRE COMPOSITES, Ireland Jose Espí and Abderrahmen Aridhi Supporting Tools To Technical Advance In The Early Stages Of Design. 123 Nerea Markaide Airpoxy: Thermoformable, Repairable And Bondable Smart Epoxy Based Composites For Aero Structures 140 Alaitz Ruiz de Luzuriaga Bonding Strategies For Dynamic 3r-Composites 153 Stefan Weidmann1 Semi-Finished 3r Material Manufacturing And Thermoforming Of 3r-Composites 161 Alkiviadis S. Paipetis Implementation Of Structural Health Monitoring (Shm) Techniques For The Evaluation Of Repairing On 3r Polymers and Composites 249 16:05 R&D Research in the Field of Aeronautics and Air Transport - HARVEST Session Chair: Prof. A. S. Paipetis, University of Ioannina, Greece Arrate Huegun Reshapeable, Repairable And Recyclable Thermally Conductive Epoxy Resin 231 Martin Gurka Advanced Monitoring Techniques For Mechanical Testing Of Cfrp 235 Paipetis S. Alkiviadis Harvest: Hierarchical Multifunctional Composites With Thermoelectrically Powered Autonomous Structural Health Monitoring For The Aviation Industry 244 Michele Zappalorto Damage monitoring of composite structures via electrical measurements: recent activities and open issues 266 Lazaros Tzounis Advanced Thermoelectric Concepts For The Aviation Industry 302 DAY 3|05.09.2019 Main author / coordinator Abstract Title Abstract ID ROOM 1 10:00 Aerostructures: Surfaces and Interfaces Part I 14:00 Aerostructures: Surfaces and Interfaces Part II Chair: Prof. H. Dong and Dr. X. Li, University of Birmingham, UK LIAN Yong Investigation and Characterization of Electrospark Deposited FeCoCrNiNb0.5 High Entropy Alloy coatings on AZ31B magnesium alloy 154 Kaijie Lin Multifunctional Bio-inspired Integrated Thermal Protection Structures: Design, Numerical Simulation and Selective Laser Melting Fabrication 158 Jin Zhang The State Of The Art On The Coatings Prepared By Cathode Plasma Electrolytic Deposition 160 Andreia Araujo Challenges And Opportunities On Nano-Enabled Multifunctional Composites For Aerostructures 190 jingao The Effect Of Corrosion Micro-Environment On Deadhesion And Electrochemical Behavior Of Coated Metal 207 Nicolas Laugel Electrolytic Plasma Polishing On Light Alloys And Additively Manufactured Surfaces 296 Elias P. Koumoulos Assessing The Reinforcement Mechanism Through Nanoindentation Mapping Data Of Nanoenhanced Composites 319 Iryna Husarova Application Of Modified Carbon Plastics In Advanced Units Of Aviation And Aerospace Structures 320 Xiaoying LI Improved IFSS of active screen plasma treated CFR composites 383 Hanshan Dong Towards High-Performance Carbon Fibre Reinforced Composites - A Novel Plasma Surface Engineering Approach 385 Alberto Tagliaferro Improving carbon fibers / epoxy resin composite for Aerospace structural applications by functionalization 401 16:05 R&D Research in Space - SpaceCarbon Session Chair: Dr. N. Rocha, INEGI n/a SpaceCarbon Project overview n/a n/a CFRP materials for Space applications (overview of current market and on-going innovations) n/a n/a CFRP in satellites (overview and recent trends) n/a n/a Importance of CFRP in launcher systems (overview and implementation of in-house process) n/a n/a Carbon fibres manufacturing (global overview and implementation of high modulus pilot plant implementation) n/a n/a Testing of CFRP materials in space relevant conditions n/a n/a Life Cycle Assessment and possible impacts n/a ROOM 2 10:00 R&D Research in the Field of Aeronautics and Air Transport - ENABLEH2 Session Chair: Dr. V. Sethi, Cranfield University, UK Vishal Sethi Enableh2 - overview presentation 151 CM Benson Hydrogen – Enabling A Safe Fuel: “Safety Challenges And Opportunities For Lh2-Fuelled Aircraft And Supporting Infrastructure” 93 Askin T. ISIKVEREN Hydrogen – A Technically Feasible And Sustainable Fuel: “Technology Evaluation Of Lh2-Fuelled Aircraft” 110 Isak Jonsson Integration Of Cryogenic Hydrogen Fuel And Propulsion Systems For Commercial Aviation 257 Xiaoxiao Sun Hydrogen – A Clean Fuel: “Ultra-Low Nox Hydrogen Micromix Combustion Systems For Lh2-Fuelled Aircraft” 265 Dr. Pierre Q. Gauthier Benefits Of Enableh2 Numerical And Experimental Hydrogen Micromix Combustion Research For The Gas Turbine Industry. 297 14:00 R&D Research in the Field of Aeronautics and Air Transport - SUCOHS Session Chair: Dr.-Ing. T. Wille, DLR, Germany Martin Liebisch Robustness Analysis Of Cfrp Structures Under Thermomechanical Loading Including Manufacturing Defects 64 Tobias Wille Sucohs Project – Sustainable Cost Efficient High Performance Composite Structures Demanding Temperature Or Fire Resistance 69 Lyaysan Amirova Properties And Structure Of Cyanate Ester/Polyethersulfone Composites 82 Nikos Pantelelis Cure Monitoring Of High-Temperature Resins For Enhancing The Manufacturing Of Advanced Composites 85 F. Schadt Thermoplastic Particle Toughening Of Carbon Fiber / Cyanate Ester Composites 94 16:05 Aeroelasticity and Morphing Aerospace Structures Chair: Prof. Y. Yaman, METU, Turkey Michał Szcześniak Technology Of Ground Vibration Testing And Its Application In Light Aircraft Prototyping 181 Burak Erturk Assessment Of The Performance Of A Cruise Missile Wing Depending On Design Parameters At Various Flight Conditions 220 Spyridon Kilimtzidis Design And Optimization Of A Scaled Down Composite Wing Model For Aeroelastic Wind Tunnel Testing 282 Antonio Suma Dielectric Barrier Discharge Plasma Actuator for Load Alleviation and Instability Control in a Compressor Cascade 423 ROOM 3 10:00 Environmental, Recycling and Disposal Strategies Chair: Mr. T. Moll, Fraunhofer-Gesellschaft, Germany S. Dmytriyev Evaluation Of Research Initiatives On The Problem Of Reducing The Air Transport Noise Rate In Accordance With The Tasks Of Flightpath 2050 Goal 9 54 Claudia Aguilar New Tailor-Made Sizing Strategies For Recycled Carbon Fibres To Improve The Mechanical Properties Of Polymeric And Cementitious Composites. 75 Ivo Jebacek Global Trends In Aeronautical Environmental Field And Their Real Impact 128 Fabian Albrecht Vliesrtm – Reuse Of Carbon Fiber Waste In Composite Structures 135 Mario Malinconico Airscraft Composites Recycling: Turning Waste Into Products 195 Lazaros Tzounis Advanced Thermoelectric Concepts For The Aviation Industry 302 14:00 Systems/Prognostics/Safety Part I 16:05 Systems/Prognostics/Safety Part II Chair: Prof. M. Dalla Vedova, Politecnico di Torino, Italy Paweł Głowacki Operations Reliability Study Of The Large Aircraft 16 Vangelis Kollias (TELETEL SA) Spacefibre Implementation Performance Assessment: Simulation and Traffic Generation At Full Network Load 48 Marcel Mischke Preliminary Safety Assessment On System Design Level For Broadband Acoustic Liners 109 Andrea De Martin Preliminary Analysis On An Ivhm Approach For Prognosis Of High-Pressure Filters For Hydraulic Power Control Modules Of Helicopters 142 Andrzej Gębura Capabilities Of Diagnosis Of Helicopter Mi24 From The Perspective Of Hums System 152 Matteo Davide Lorenzo Dalla Vedova A New Active Asymmetry Monitoring And Control Technique Applied To Critical Aircraft Flap Control System Failures 198 Pier Carlo Berri Experimental Comparison Of Fiber Bragg Grating Installation Techniques For Aerospace Systems 199 Pier Carlo Berri A Simplified Monitoring Model For Pmsm Servoactuator Prognostics 200 Matteo Davide Lorenzo Dalla Vedova Proposal Of A New Simplified Fluid Dynamic Model For Aerospace Servovalves 201 Anna Chiara Uggenti Hydrogen Leakages In A Congested Aircraft Environment: A Cfd Simulation Method 279 Andrea De Martin Design Of A Phm System For Electro-Mechanical Flight Controls: A Roadmap From Preliminary Analyses To Iron-Bird Validation 294 Luboš Janhuba Interactive Flight Crew Manual Procedures based on Failure Scenarios Observed in System Behaviour Simulations 350 Roman Savelev Methodology for analyzing competing options for air managment systems at the stage of conceptual design of civil aircraft’s complex of onboard systems 403 Anatoliy Satin Application SimInTech software for optimization fuel sys- tem parameters of the perspective helicopter 417 ROOM 4 10:00 Unconventional Airplane Configurations Chair: Prof. C. Galinski, Warsaw University of Technology Alessandro Sgueglia Multidisciplinary And Multifidelity Exploration Of A Medium Range Blended Wing-Body Transport Aircraft 34 TOMASZ GOETZENDORF-GRABOWSKI Lightweight Uav For Emergency Medical Service – Synthesis Of The Layout 105 Jacek Mieloszyk Numerical Multidisciplinary Optimization Of Aircraft With Flight Dynamic Stability Constraints 122 Theiner Robert Ul-39 Albi Ii – A New Generation Development 280 Klimczyk Witold CFD Analysis of Selected Distributed Propulsion Concepts for an Inverted Joined Wing Airplane 371 14:00 Innovative Space Developments Part I 16:05 Innovative Space Developments Part II Chair: Prof. C. Stavrinidis, ESA, ESTEC, The Netherlands Konstantinos Kontis Test Facility To Investigate Plume-Regolith Interactions 44 Capovilla G. Design Of A Multifunctional Composite Structure For Modular Cubesat Applications 211 Martin Schubert Multifunctional Load-Bearing Aerostructures With Integrated Space Debris Protection 227 Spiridon Savvas Ppu For A Small, Low Power And Low Cost Eps 248 Iosif S. Paraskevas Space Robotics Technologies For On-Orbit Servicing Missions 251 George Avdikos Spacelidar: Redesigning A Successful Ground-Based System For Space Applications 276 Iryna Husarova Tharmal Protection Structures of Reusable Spacecraft, Made of Composite Materials, Based on Ceramic Matrix 330 Peter Spanoudakis Corner Cube Mechanism (CCM) for MTG: Qualification and Acceptance Test campaign results and lessons learned 339 Peter Spanoudakis Large Angle Flexure Pivot development for future science payloads for space applications 340 Lionel Kiener Innovative concept of compliant mechanisms made by additive manufacturing 353 Jaroslav Kovacik Titanium solar metallurgy - Earth and Space 405 Stelios Bollanos OP3C – On board Processing for Compression and Clouds Classification in hyperspectral satellite data Ext10 Dimitrios Soudris High-Performance DSP in Space: R&D with FPGA and DSP Platforms Ext11 ROOM 5 10:00 Challenges in UAS Operations / New trends in UAVs Chair: Prof. F. Quagliotti, Politecnico di Torino, Italy and Dr. K.Valavanis, University of Denver, USA Chair: Prof. I. Jebacek, Brno University of Technology, Czech Republic Jan Denzel Identification Of The Flight Performance Of The E-Genius-Mod 108 Mirosław Nowakowski Study Of Unmanned Aerial Vehicles’ Flight Capabilities In The Aspect Of Minimising The Threat To Civil Aviation 136 Jan-Niclas Walther Towards Surrogate-Based Aero-Structural Design Optimization Of An Unmanned Aerial Vehicle 175 Thomas Dimopoulos Stability Study And Flight Simulation Of A Blended Wing Body Unmanned Aerial Vehicle 212 Papadopoulos Charalampos Numerical 3d Study On The Influence Of Spanwise Distribution Of Tubercles On Wings For Uav Applications 215 Miroslav Červenka Ogn Trackers As Open Alternative To Ads-B And Tcas For Small Airplanes And Autonomous Uavs 299 Illia S. Kryvokhatko Aerodynamic moment characteristics of tandem-scheme aircraft 358 14:00 R&D Research in the Field of Aeronautics and Air Transport - CENTRELINE Session Chair: Dipl.-Ing. F. Peter, Bauhaus Luftfahrt e. V., Germany Arne Seitz Recent Advances In Fuselage Wake-Filling Propulsion Integration 77 Arne Seitz Optimality Considerations For Propulsive Fuselage Power Savings 78 Fabian Peter Specification of the CENTRELINE reference aircraft and power plant systems 334 Biagio Della Corte Experimental and Computational Analysis of Model Support Interference in Low Speed Wind Tunnel Testing of Fuselage Boundary Layer Ingestion 387 Stefan Bizer Sizing of hybrid-electric propulsion systems Ext8 16:05 R&D Research in the Field of Aeronautics and Air Transport - ACASIAS Session Chair: Dr. H. Schippers, NLR, The Netherlands J. Verpoorte ACASIAS overview 370 Y. Konter Integration of VHF and GNSS antennas in a Fibre Metal Laminate fuselage panel 374 Victor Lung'aho Towards application of flexible printed circuit boards into aircraft structures 377 Malte Misol Remote Sensing for a Lining Integrated Active Structural Acoustic Control System 397 Stephan Algermissen Towards a Lining Integrated Active Structural Acoustic Control System 398 J. Verpoorte Integration of a Ku-band satcom antenna array in a composite fuselage panel 373 ROOM 6 10:00 Surface Engineering for Aeronautics and Space Chair: Prof. M. Sebastiani, University "Roma Tre" Di Kang Research On Ultrasonic Vibration Assisted Laser Polishing n/a Xiaohua Zhang Effects Of Combined Plasma Zr Alloying And Shot Peening On The Fatigue Behaviors Of Ti6al4v Alloy n/a D. Sioulas Wear and Corrosion Resistance of WC-Co-Cr nanostructured and conventional coatings HVOF sprayed on Al7075 n/a Marco Sebastiani EFFECTS OF THERMAL CYCLING ON NANO-SCALE ELASTIC MODULUS AND FRACTURE TOUGHNESS OF THERMAL BARRIER COATINGS n/a Marco Sebastiani H2020 OYSTER - OPEN CHARACTERISATION AND MODELLING ENVIRONMENT IN NANOARCHITECTURED HARD/SOFT INTERFACES n/a Ennio Capria Non destructive Measurement of Residual Strain using synchrotron X-rays n/a Spyros Diplas The importance of advanced characterisation in various stages of modern manufacturing n/a 14:00 Design Challenges for Future Aero-Engines - Part I 16:05 Design Challenges for Future Aero-Engines - Part II Chair: Prof. C. Galiński , Institute of Aviation, Poland Juan David Pava Adaptation Of A Test Bank A / M37t-21a Motor Pt6-60 For Bio-Fuel Testing In Aviation 148 Svatomir Slavik Optimal Propeller Selection By Means Of Pareto Sets 157 Kyrylo Savchenko An Influence Of Shroud Design Parameters On Static Stress State Of Blade Assemblies 170 Ioannis Templalexis F100-Pw-229 Engine Fault Detection Based On Real Time Data 196 D.A. Dolmatov High Temperature Combustion Oxidation Mechanisms Control And Refinement 205 Radoslaw Przysowa Estimation Of Performance Parameters Of Turbine Engine Components Using Experimental Data In Parametric Uncertainty Conditions 237 Yaroslav Dvirnyk Determination Of Serviceability Limits Of A Turboshaft Engine By The Criterion Of Blade Natural Frequency And Stall Margin 274 Maria grazia de giorgi Dynamic performance simulation and control of an aeroengine by using NARX models 411 ROOM 7 10:00 Advanced Composites for Aerospace Applications: Modeling - Testing - Validation Part I 14:00 Advanced Composites for Aerospace Applications: Modeling - Testing - Validation Part II 16:05 Advanced Composites for Aerospace Applications: Modeling - Testing - Validation Part III Chair: Prof. G. Lampeas, University of Patras, Greece Antonios G. Stamopoulos Assessment Of The Shear Properties Of Thermoplastic Composites Using The ±45 And The V-Notched Rail Shear Method 28 Dimitris Zacharopoulos Arrestment Of Cracks In Plane Extension By Local Rectangular And Semi-Annular Patches 29 Konstantinos Tserpes Numerical Evaluation Of Crack Stopping Mechanisms In Composite Bonded Joints Due To The Presence Of Corrugation And Bolts 37 T. S. Plagianakos Mechanical Characterization Of Woven Thermoplastic Polymers For Aerospace Applications 90 Evgenios Louizos Green Regional Aircraft, Structural Design And Manufacturing Of Composite Spars For Ground Demonstrator 97 E. Karachalios Design, Analysis, Manufacturing And Ground Demonstrator Testing Of Pressure Bulkheads 104 José Humberto Almeida Jr Enhancing The Translaminar Fracture Toughness With Variable-Axial Composites 126 D. G. Stamatelos Buckling Solutions Of Stiffened Panels With Varying Degree Of Anisotropy Using The Rayleigh-Ritz Method 194 P. Czarnocki Development Of A Field Repair Procedure For Light Composite Aircrafts. 224 Volodymyr Symonov Dimensionally Stable Laminates Under Thermal Loading And Their Applications 254 Hugo Tavares Lightning And Emc Testing Of A Full Scale Aircraft Cockpit 258 Panayiotis Tsokanas Mode II Fracture Toughness Of Asymmetric Metal-Composite Adhesive Joints 284 Bharath Ravindran Optimization of split Hopkinson pressure bar and experimental characterization of 3d woven composite at high strain rate 378 George Lampeas Uncertainty quantification of Digital Image Correlation measurements based on projected speckle patterns 393 Kafkas Angelos Numerical Procedure for the Estimation of the Aeroelastic Divergence Limit of a Composite Aircraft Wing using Higher Order Aerodynamics 396 P. Papanikos Finite element-based design of neutral inhomogeneities 420 ROOM 8 10:00 HARVEST project internal meeting 14:00 HARVEST project internal meeting DAY 4|06.09.2019 Main author / coordinator Abstract Title Abstract ID ROOM 1 9:00 Human Factors Part I 11:30 Human Factors Part II Chair: Dr. M. Spieck, Thelsys GmbH, Germany Nicole Dias Aircraft Maintenance Professionals: Stress, Pressure And Fatigue 19 Barry Kirwan Towards The Harmonisation Of Just Culture Across Organisations At A Single Airport 25 Volker Settgast New Representations Of The Air Situation Picture - Subejective Feelings Vs. Test Data 80 Barry Kirwan Charting The Edges Of Pilot Performance 92 Nelson Matos Implementation Of Advanced Technologies Into Aeronautic Integrated Maintenance Concept - Use Of Virtual Reality In Ground-Floor Training Maintenance Execution 115 Jim Nixon Pragmatic Science? Reflections On The Academic- Industry Interactions In A European Aviation Research Programme. 146 T. Sommer The Pilot Influence On The Flutter Velocity Of The Lightweight Plane 182 Pavel Zikmund Flight Test Of Pilot-Aircraft Haptic Feedback System 247 Martin Spieck Human Factors of Collaborative Engineering Ext3 ROOM 2 9:00 Small Air Transport (SAT) Challenges Chair: Dr. A. Iwaniuk and Dr. K. Piwek, Institute of Aviation, Poland Dawid Ulma The Use Of Affordable Technologies In Manufacturing Of Aircraft Structures For Small Air Transport On The Example Of Cabin Structure In The Sat-Am Project 58 Jacek Dudziak The Use Of Affordable Technologies In Manufacturing Of Aircraft Structures For Small Air Transport On The Example Of Composite In The Sat-Am Project 59 Bartosz Dziugiel Sats - Small Aircraft Commercial Operation Safety – Distributed Probability Model. 72 Bartosz Dziugiel Sats - Small Aircraft Commercial Operation Safety – Distributed Accident Risk Modelling 73 Iwaniuk, Andrzej; Barriers To Development And Challenges For Small Air Transport - Assessment Of The Potential For Change 125 Pawel Balon The Application Of Thin-Wall Integral Constructions In Aviation In Example Of The Sat-Am Project 309 11:30 Modeling and Characterization of Nano-enabled Multifunctional Materials Chair: Prof. K. Tserpes, University of Patras, Greece Bezsmertna V. Multifunctional Polymer-Based Composite Materials With Weft-Knitted Carbon Fibrous Fillers 35 Konstantinos Tserpes Computation Of Mechanical, Thermal And Electrical Properties Of Cnt/Polymer Multifunctional Nanocomposites Using Numerical And Analytical Models 38 Elli Moutsompegka Tensile strength of pre-bond contaminated scarf composite bonded repairs by thermal degradation and de-icing fluid 364 P. Papanikos Mechanical behavior of multiphase composites with randomly located particles 421 Konstantinos Tserpes Production and mechanical characterization of a novel bio-based structural adhesive Ext6 ROOM 3 9:00 Design of sensors and their integrated systems Chair: Dr. C. Szczepanski, Institute of Aviation, Poland Sławomir MICHALAK Operational Readiness Management Of The Integrated Communication System On Board A Military Aircraft 134 George-Konstantinos Gaitanakis On The Use Of Aesa (Active Electronically Scanned Array) Radar And Irst (Infrared SearchandTrack) System To Detect And Track Low Observable Threats 171 Cezary Szczepański How To Choose The Right Sensors For Uav Flight Control And Navigation 219 Jerzy Graffstein Selected Aspects Of Mems Technology Implementation Into Flight Control Systems 240 Ewelina Szpakowska-Peas Crw 13 – The New Generation Radio : The Concept, Design, And Tests 242 Mariusz Krawczyk THE AIRPLANE TRIM SYSTEM - NEW FUNCTIONALITIES 349 11:30 Nano-/micro-composites by design: methodologies and tools for enhanced properties against performance/reliability failure Chair: Prof. K. Charitidis, National Technical University of Athens, Greece Fedir Gagauz Characterisation Of Cfrp-Titanium Local Reinforcement 189 S. Termine Novel Carbon Nanotube grafting on Carbon Fibres through Chemical Vapor Deposition: Investigation of epoxy matrix/fibre interface via nanoindentation test 355 Panagiotis Maroulas Thermal conductive polymers targeting heat sink applications: Development of polymer / CNT / graphene Oxide nanocomposites 368 Tatjana Kosanovic Milickovic 3D printed CFRPs and micro-composite products by design from recycled resources 408 ROOM 4 9:00 Sustainable Aviation Chair: Prof. T. Panidis, ECATS, Belgium Hans Schlager Effects Of Alternative Fuel On Aircraft Emissions: Results From Recent Flight Experiments 133 Grewe, V. How Large Is The Icao’s “Carbon Offsetting And Reduction Scheme For International Aviation” Reducing The Climate Impact Of Aviation? – An Ecats Perspective 150 Simon Christie Estimating Fuel-Water Dissolution In Conventional And Alternative Fuels 159 A. Alexiou Multidisciplinary Preliminary Aero-Engine Design For More Sustainable Flight Missions 285 D. Katsikogiannis Reducing Environmental Footprint Of Civil Aircraft Missions Exploiting Free Routing Possibilities 287 Víctor Archilla AVIATOR - Assessing aViation emission Impact on local Air quality at airports: TOwards Regulation Ext7 11:30 R&D Research in the Field of Aeronautics and Air Transport - AMOS Session Chair: Dr. U. Woy, University of Sheffield AMRC, UK Adrien Doux Thermo-mechanical Modelling for Directed Energy Deposition 88 Adrien Doux Ded Topology Optimisation Study 89 Jinghao Li A Quantitative Model Of Competitive Grain Growth Behaviour In Direct Energy Deposition Fabricated Ti6al4v 95 Ole Krarup Measuring Extreme Temperatures In Sand-Grain-Sized Droplets Of Liquid Titanium At Sub-Ms Speed 131 Wei Guo A State-Of-The-Art Review On Additive Manufacturing Of Inconel Alloy 718. 197 ROOM 5 9:00 Integration of self-responsive functions in Aeronautical Nanocomposites Chair: Prof. L. Guadagno and Prof. V. Tucci, University of Salerno, Italy S. Orfanidis Study Of Repair Efficiency Of A Self-Repaired Microcapsule Based Composites Via 1h Nmr Spectroscopy. 71 Elisa Calabrese Design Of Supramolecular Carbon Based Self-Healing Systems For Structural Application 210 Marialuigia Raimondo Detection Of Electrically Conductive Paths By Tunneling Atomic Force Microscopy (Tuna) In Self-Healing Aeronautical Resins 256 Giuseppina Barra Damping Assessment Of New Multifunctional Epoxy Resin For Adaptive Structures 269 Athanasios Kotrotsos1 Self-healing and Electrospinning. An Innovative Synergy for Composite Aerostructures 327 Patrizia Lamberti Design of strain sensors for damage monitoring based on different epoxy systems loaded with carbon nanotubes Ext9 11:30 R&D Research in the Field of Aeronautics and Air Transport - AERIALIST Session Chair: Prof. U. Iemma, Roma Tre University Imran Bashir Development Of 3d Boundary Element Method For The Simulation Of Acoustic Metamaterials/ Metasurfaces In Aero-Acoustic Environment (In Flow) For Next Generation Aero-Engine Applications 263 Umberto Iemma AERIALIST: an integrated toolchain for the design of metamaterial-based devices in aeronautics 337 Huina Mao An inverse method for design and characterisation of acoustic materials 347 J. Kennedy The influence of additive manufacturing strategies on the performance of acoustic metamaterials 376 ROOM 6 9:00 Recent Advances in Light Alloys for Aerospace Applications Part I 11:30 Recent Advances in Light Alloys for Aerospace Applications Part II Chair: Prof. G. Haidemenopoulos and Prof. A. Kermanidis, University of Thessaly Gregory N. Haidemenopoulos Effect Of Aging Condition And Precipitate Coherency State On Corrosion Of Al-Alloy 2024 42 Osama Alyousif Stress Corrosion Cracking Of Commercially Pure Titanium In Hydrochloric Acid Using A Constant Load Method 86 Ioannis D Pantelis Microstructural And Mechanical Behavior Of Friction Stir Welded Aa5083-H111 Plates Reinforced With Two Different Ceramic And Carbon Nanotubes Particle Mixtures 169 Ioannis D Pantelis Study Of Friction Stir Dissimilar Butt Welding Between Thin Plates Of The Aa5754 And The Aa5083 Aluminum Alloys 174 Vadim Kruts Adhesive Strength Characterisation Of Titanium-Composite Joints 186 Saeed Tamimi Texture And Microstructure Evolution Of An Aa-7075 Alloy During Cold Radial Forging 295 Christina Margarita Charalampidou The Effect Of Adhesive Bonding On The Corrosion Behavior Of Aa2024 Fswed Single Lap Joints 307 Liaoyuan Chen Influence of rare earth CeO2 on microstructure and mechanical properties of Ni718 coating containing Ti(C,N) reinforcing phase 342 Farid Abed Thermomechanical Response of Mg AZ31 at Different Levels of Temperatures and Strain Rates 359 Nikolaos Alexopoulos Corrosion resistance of Al-Cu-Li (2198) alloy for different ageing tempers 422 Shai Essel Recent advancements in Magnesium technologies for further weight reduction in aerospace applications n/a ROOM 7 16:45 New generation of hybrid Chair: Dr. A. Shanygin, TsAGI, Russian Federation Aleš Kratochvíl A New Approach Of Creating A Finite Element Stick Model For Flutter Analysis 166 Vedernikov Dmitrii Investigation Of Weight Efficiency Of Implementation Of Composite Materials For Alternative Configurations Of Wing Of Domestic-Airlines Aircraft 177 Mirgorodskiy Yuriy Numerical And Experimental Investigation Of Strength Of Composite Unidirectional Layouts Based On Automated Fem Integrated With Module, Supported By Method Of Digital Image Correlation 255 Ivan Kondakov Experimental Study Of Impact-Protective Elements For Unidirectional Ribs Of Lattice Composite Aircraft Structures 260 Evgeny Dubovikov Numerical Investigation Of Initial Crack Growth In Composite Laminates Under Tension 261 Lada Aleksandrovna Zudova Hybrid Structural Layout Of The Wing Box For Small Aeroplane 267 А. Shanygin, М. Levchenkov Novel method for strength analysis of damaged high-loaded composite panel Ext16 11:30 R&D Research in the Field of Aeronautics and Air Transport - Overview project presentations Chair: TBA Karsten Knobloch ARTEM: Aircraft noise Reduction Technologies and related Environmental iMpact 76 Damien Desgaches DEFACTO: Disruptive Fuselage Study By Topological Optimization and Additive Manufacturing 22 Quanren Zeng MMTech: Multiscale and multiphysics numerical modelling for Laser Engineering Net-Shaping process Ext5 FREDIANI Aldo PARSIFAL: Prandtlplane architecture for the Sustainable Improvement of Future Airplanes 399 ROOM 8 9:00 HARVEST project internal meeting