AIMTECH WEIGAND COMBAT LSP HIGH STANDARD Lightweight, No-Drill, No-Tap HANDGUN SCOPEMOUNTS® REDHAWK/BLACKHAWK HUNTER - SCOPE BASE Pistol Mount System No-drill, no-tap mount fits Redhawk and TAURUS DRILL & TAP SCOPEMOUNT - Blackhawk Hunter with integral ring Contoured For Bull Barrels ri

Installs quickly to let you add Mounts to the top strap on all Taurus, large cuts on the barrel. Double recoil lugs hold n Thirteen cross-slots pro- scope capabilities to pistols. Issue and medium frames equipped with factory, tight under heaviest recoil. g vide a wide range of mounting positions; cantilever design cen- sights remain fully functional. adjustable rear sights. Requires drilling SPECS: Extruded aluminum, black or silver, anodized, matte fin- s

1 7 ters the weight over the grip. Contoured for factory bull barrels & Accepts Weaver-style rings. ab and tapping two, 6-40 holes in top strap. Accepts Weaver-style ish. 5 ⁄8" (13cm) long, ⁄8" (22mm) wide, 2.6 oz. (74 g) wt. Includes rings. Models available for guns made pre-1/01 and post-1/01 (drill and tap). Accepts Weaver-style rings. ab SPECS: Machined 6061 T6 alumi- mounting screws. 1 num, black anodized finish. 5" long (12.7cm), 1" wide (2.5cm), 4 oz. guns. ab #957-000-045AK Silver Redhawk Mount 7E39C96. . $ 49.95 SPECS: Aluminum, anodized, matte black finish. 5 ⁄4" (13.3cm) b 1 7 a (113 g) wt. Loctite®, screws and wrench included. w/Acc SPECS: Aluminum, black or silver matte finish. 4 ⁄2" (11cm) long, ⁄8" long. Fits LSP Match barrels, factory bull barrels require drilling and

#957-000-044AK Black Redhawk Mount 7E39C96. . . . 49.95 ses Rail fits 9mm/.40 models only. HK USP fits 9mm/.40 only. (22mm) wide, 1.7 oz. (48 g) wt. Includes mounting screws. tapping. Includes instructions and screws. SUPER REDHAWK® - Aluminum mount #530-500-001AK High Standard Scope Base, # FITS PRICE #957-100-180AK Blk D/T Mount, pre 1/01, 7E23B96...... $ 29.95 attaches to the Ruger factory ring cuts 3E25X56...... $ 29.95 #017-192-001AK /Taurus 99 7A50V41 $ 59.99 #957-100-181AK Silver D/T Mount, pre 1/01, and requires no drilling and tapping. Uses #017-117-001AK Glock 17/17 L, 19, 22, 23 7A50V41 $ 59.99 7E23B96...... 29.95 three, steel, recoil pins to prevent “scope LSP S&W 41 #017-000-005AK Glock w/Acc Rail 7A56H18 $ 78.99 #957-000-059AK Silver D/T Mount, post 1/01, flyoff,” and accepts Weaver-style rings or mount systems such as used on Tasco 40mm red dot optics. Su- #017-000-006AK HK USP full size 7A56H18 $ 78.99 7E23U96...... 29.95 LONG SCOPE BASE #957-000-060AK Blk D/T Mount, post 1/01, per Redhawk .44 Mag fits only the .44 Magnum and can be ® #017-103-001AK Ruger Mk I & Mk II 7A42V96 $ 48.99 7E23U96...... 29.95 installed without removing the front and rear sights. Features a Extra Long For Precise matte, silver, anodized finish. Super Redhawk Casull is simi- Eye Relief TAURUS TRACKER SCOPE MOUNT - lar in design, but uses the rear sight notch as a recoil lug to allow ALLCHIN rUGER .22 RIMFIRE HANDGUN Precision-machined, aluminum scope the frame and mount to take maximum recoil. Fits .44 Magnum, Six inch long rail lets mount accepts Weaver-style rings to .454 Casull, and Ruger .480 models with removal of the rear you precisely tailor eye relief for each shooter. Fits factory drilled C-MORE MOUNT let you mount a scope on your Taurus sight. Available with black, anodized finish. and tapped barrels; drill and tap older barrels for custom mounting Tracker. Also great for red-dot optics. Integral recoil lug fits applications. Accepts all Weaver-style rings. ab No Gunsmithing Mount Gets SPECS: .44 Mag - Aluminum, silver, matte, anodized finish. 5" into rear sight notch for a rock solid hold that prevents scope (12.7cm) long. Fits .44 Magnum only. 2.6 oz (73g) wt. Casull - SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate Sight As Close To movement. Requires removing rear sight. No drilling or tapping Aluminum, black, matte, anodized finish. 5½" (14cm) long. Fits .44 models for 7" Long or 5½" Long Heavy barrel. Includes screws, As Possible required. ab Magnum, .454 Casull, and .480 Ruger models. Includes mounting instructions. 5 SPECS: Aluminum, silver, matte finish. 4½" (11.4cm) long, ⁄16" #530-041-007AK 7" S&W M-41 Mount 3E25X56 . . . $ 31.95 Lightweight, machined alumi- screws. (7.8mm) high from bottom to top of mount. 1.3 oz. (36.8g) weight. #957-000-036AK Super Redhawk .44 Mag Mount, #530-041-055AK 5½" S&W M-41 Mount, num mount allows you to install a Includes mounting screws. Fits .22 LR, .22 Mag,, .17 HMR. 3E25X56...... 31.95 C-More on any factory 7E39C96...... $ 49.95 #957-000-076AK Tracker Scope Mount, #957-000-050AK Super Redhawk Casull Mount, drilled and tapped Ruger .22 rimfire handgun. No gunsmithing 7E24X28...... $ 29.99 required; simply attach the mount to the gun and screw the C- 7E47U96...... 59.95 ANACONDA/PYTHON/KING COBRA DRILL & TAP MOUNT - More to the mount. Low profile, only ¼" high, positions the sight RUGER SINGLE SIX - No-drill, no-tap RUGER MARK I/II/III DRILL & TAP - Designed to fit factory Large, contoured lug fits in place of the as close to the receiver and bore axis as possible. ab mount attaches to frame at the rear sight drilled and tapped receivers for rear sight and prevents base movement SPECS: Aluminum, natural matte finish. 4" (10.2cm) long, 1¼" screw. Contoured recoil lug fits in rear sight fast, easy, no-gunsmithing in- under recoil. Fits factory drilled and (3.2cm) wide, ¼" (6.4mm) high. Fits all factory drilled and tapped slot to prevent movement. Accepts Weaver- stallation. Fully contoured to fit tapped (three hole) Anacondas and cur- Ruger .22LR . style rings. Use on .22 LR only, not for use on .32 Magnum guns. flush on top of the receiver or #005-000-001AK C-More Mount For Ruger, rent Pythons. Accepts Weaver-style rings. ab SPECS: Extruded aluminum, black or silver, anodized, matte fin- 1 barrel without unsightly gaps. ⁄2 1 7 5K31B00...... $ 40.00 SPECS: Aluminum, anodized, natural silver finish. 4 " (11cm) long, ish. 4 ⁄2" (11cm) long, ⁄8" (22mm) wide, 1.3 oz. (38 g) wt. Includes 7 Extra-strong, lightweight alu- ⁄8" (22mm) wide, 1.7 oz. (48 g) wt. Installation requires drilling and mounting screws. minum; accepts Weaver-style rings. Can be easily installed on tapping of frame. Includes screws and instructions. B-SQUARE S&W #957-000-043AK Silver Single Six Mount 7E23C96. $ 29.95 non-factory drilled and tapped pistols. #957-107-101AK Silver Anaconda Mount, #957-000-042AK Black Single Six Mount 7E23C96. . 29.95 3 7E27D99...... $ 34.99 SPECS: Extruded aluminum, anodized, black or silver. 4 ⁄4" (12cm) REVOLVER MOUNT S&W REVOLVER - Low profile and light- long,Includes mounting screws. Fits Mark I, II, III, and 22/45™. REDHAWK 6" & 7½" BARREL - #957-108-022AK Black Mark I/II/III Scopemount, No-Drill, Scope/Aimpoint weight. Fits newer, factory drilled and Strong, lightweight mounts tapped K, L and N frame ; no 7E15D96...... $ 19.95 Base Takes Magnum Recoil available for Ruger Redhawk models with 6" or 7½" barrels. Re- gunsmithing required. Older revolvers require drilling and tap- #957-108-002AK Silver Mark I/II/III Scopemount, move rear sight for installation, no drilling or tapping required. Quickly converts popular, ping. 7E15D96...... 19.95 Uses a front sight replacement block for attachment at the adjustable-sight revolvers SPECS: Extruded aluminum, black or silver, anodized, matte fin- muzzle end and the rear sight elevation hole for attachment at 1 7 DAN WESSON LARGE FRAME REVOLVER MOUNT - Rugged, to accept compact scopes ish. 4 ⁄2“ (11cm) long, ⁄8“ (22mm) wide, 1.3 oz. (38 g) wt. Includes the back of the top strap. Rear sight notch becomes a rock-solid yet lightweight, aluminum (using Weaver-style rings) mounting screws. recoil lug for consistent accuracy. Eight cross-slots allow you to scope mount attaches to or Aimpoint. Attaches using a special “nut” installed into the #957-113-100AK Black S&W Mount 7E23D96 . . . $ 29.95 position your optics for optimum eye relief. Accepts Weaver-style the shroud and features rear sight recess. #957-113-101AK Silver S&W Mount 7E23D96. . . . 29.95 1 rings or mounting systems. ab six slots for Weaver-style SPECS: Aluminum, anodized black or silver. Steel nut. 5 ⁄4" (13.3cm) SPECS: 6063-T6 aluminum, silver or black, matte, anodized finish. BUCKMARK - Convert open sight, rings that let you easily position the scope for correct eye relief. long. Fits K/L/N models originally equipped with adjustable sights, 15 13 Requires drilling and tapping three 6-48 holes. Fits all large 1 6" Bbl. - 7 ⁄16" (20.1cm) long x ⁄16" (2cm) wide. 3.1 oz. (87g) wt. Browning Buckmark for scope use; and barrels 5 ⁄2" long or longer. Rings not included. 13 7½" Bbl. - 10" (25.4cm) long x ⁄16" wide. 4 oz. (113g) wt. Includes no gunsmithing required. Accepts all frame Dan Wesson Revolvers. Screws, hole location drawing, and #122-200-010AK S&W Mount, Black 6K42A10. . . . $ 44.99 mounting screws. Weaver-style rings. instructions supplied. #122-200-110AK S&W Mount, Silver 6K35A29. . . . .43.99 3 #957-000-071AK Redhawk 6" Bbl. Mount, Silver, SPECS: Aluminum, black or silver, matte SPECS: Aluminum, anodized, matte black finish. 5 ⁄4" (14.6cm) 1 7E47U96...... $ 59.95 finish. 6 ⁄4" (15cm) long, 1.7 oz. (54 g) wt. Fits Browning Buckmark, long. Requires drilling and tapping of shroud. Gunsmith installa- EGW REVOLVER #957-000-072AK Redhawk 6" Bbl. Mount, Black, Standard model only. Includes mounting screws. tion recommended. Includes mounting screws. SCOPE MOUNT 7E47U96...... 59.95 #957-100-200AK Black Buckmark Mount, #957-000-065AK Large Frame Revolver Mount, Black, Fits Ruger & S&W #957-000-073AK Redhawk 7½" Barrel Mount, Silver, 7E24B12...... $ 29.99 7E27U96...... $ 34.95 Revolvers 7E51U96...... 64.95 #957-000-034AK Silver Buckmark Mount 7E23C96. .29.95 #957-000-074AK Redhawk 7½" Barrel Mount, Black, X-FRAME SCOPE MOUNT - Low Ruger - Mounts the 7E51U96...... 64.95 RUGER MARK I/II/III NO-GUNSMITHING - Install conventional profile with the strength of stain- scope low on all single or red dot optics on your pistol in only less steel, this new S &W scope and double action re- REDHAWK/BLACKHAWK - Drill minutes. Lightweight, aluminum mount mount accepts Weaver-style volvers. Requires drill- and tap mount attaches the scope to attaches to a pre-drilled and tapped, rings and accessories. Installa- ing and tapping two holes. Smith & Wesson - Remove the rear your Ruger’s top strap. Fits Ruger® dovetail-filler block. Simply remove your tion is easy, simply remove the rear sight and install this versa- sight and quickly install on newer revolvers drilled and tapped at Redhawk®, Blackhawk® and Super rear sight, install filler-block, screw on tile base in just minutes. Oversize recoil lug prevents the scope the factory. Locates the scope on the top strap, over the top of the Blackhawk®. Accepts Weaver-style rings. ab mount and attach scope and rings. Accepts Weaver-style rings. mount from shifting even when shooting full-house, magnum 1 grip for better balance. Accepts Weaver-style rings. ab SPECS: Extruded aluminum, silver or black, anodized, matte fin- SPECS: Aluminum, black or silver, matte finish. 5 ⁄4" (14cm) long, loads. Fits all newer K, L, N and X-frame revolvers that come 1 7 1 SPECS: Aluminum, anodized finish, black or silver. 4" (10cm) long, ish. 4 ⁄2" (11cm) long, ⁄8" (22mm) wide, 1.3 oz. (38 g) wt. Includes ⁄2" (12.7mm) wide, 2.5 oz. (71 g) wt. Fits Mark I, II, and III. Includes drilled and tapped from the factory. Revolvers manufactured includes mounting screws. S&W fits K, L and N frame. mounting screws. Requires drilling and tapping. filler block, mounting screws and instructions. before 1992 require drilling and tapping. 1 7 #296-302-100AK Black Ruger Mount 6B24X00 . . . $ 30.00 #957-124-100AK Black Ruger Mount, #957-000-035AK Black Mark I/II/III Scopemount, SPECS: Stainless steel, natural finish. 4 ⁄2" (11.4cm) long, ⁄8" #296-302-101AK Silver Ruger Mount 6B24X00. . . .30.00 7E27T99...... $ 34.99 7E31C96...... $ 39.95 (22mm) wide. 1.3 oz. (38 g) wt. 6-48 mounting screws included. #296-301-100AK Black S&W Mount 6B24X00. . . . .30.00 #957-124-101AK Silver Ruger Mount, #957-201-100AK Silver Mark I/II/III Scopemount, #957-000-068AK Silver S&W X-Frame Scope Mount, #296-301-101AK Silver S&W Mount 6B24X00 . . . . 30.00 7E27T99...... 34.99 7E31T96...... 39.95 7E56U25...... $ 63.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 245 HIGH STANDARD TAURUS TRACKER VOLQUARTSEN RUGER® MARK II/III MESA TACTICAL rEMINGTON 870 UNIVERSAL SCOPE MOUNT FOACT RY SCOPE SCOPE MOUNT SADDLE RAIL Factory Part Ensures A MOUNT Fast, Easy, Secure Easy-Install Mount For Perfect Fit Mounting Of Scopes & Red Scopes, Red Dots & Other Genuine Factory Mount Dot Sights Tactical Sights Lightweight aluminum For A Precise Fit mount with multiple Lightweight, one-piece Weaver-style rail allows easy mount- One-piece saddle mount cross-slots for Weaver- Precision-machined, aluminum scope mount accepts Weav- ing of a red dot optic or reflex scope on your pistol. Seven cross- has a Picatinny rail that style rings allows proper scope eye relief. Weighs only 2 oz., er-style rings to let you mount a scope on your Taurus Tracker. slots provide plenty of flexibility in positioning a variety of lets you attach a scope, red won’t affect balance. TORX screws resist stripping. Requires no Also great for red-dot optics. Clamp system attaches to the different-style optics. Secures to factory pre-drilled receiver dot reflex sight, or other tactical sighting device to your Reming- gunsmithing. ab gun’s vent rib; no drilling or tapping required. holes with three, steel Allen head screws for a solid installation ton 870 shotgun. Low profile 8¼" rail also offers plenty of room to 1 3⁄ 1⁄ SPECS: Aluminum, Hard Anodized Finish. 6" (15.2cm) x ⁄2" SPECS: Aluminum, silver, matte finish. 6 4" (17.1cm) long, 2" unaffected by recoil. ab mount a night vision device or long eye relief scope. Four, steel, (13mm) high from bottom to top of mount. Fits .22 LR, .22 Mag,, rings & bases (12.7mm). Wt = 2 oz, Black. Fits: Olympic OM, M Grip, .22 Short; SPECS: Aluminum, hardcoat anodized, matte black or matte silver. Allen head cross-bolts replace the factory trigger pins to create a 5 7 5 Supermatic Citation SC-M, M Grip, .22; Supermatic Tournament .17 HMR. 4 ⁄8" (24cm) long, ⁄8" (2.2cm) wide, ⁄16" (7.8mm) high. 1.8 oz. (51g) rock solid grip between the saddle mount and receiver. Precision SK-M, M Grip, .22; Supermatic Trophy STR-M, M Grip, .22; Victor #872-000-001AK Tracker Scope Mount 2G39B19 . . $ 45.99 weight. Mounting screws included. Fits factory pre-drilled receiv- machined aluminum with cutouts that reduce weight without VCT-M, M Grip, .22 ers on Ruger Mark II and III pistols. sacrificing strength. #430-000-122AK Universal Scope Mount, VOLQUARTSEN RUGER® MARK II & III #930-000-066AK Scope Mount, Black 3Z25A09. . . $ 29.99 SPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, 3D51C96...... $ 64.95 #930-000-065AK Scope Mount, Silver 3Z25A09. . . . 29.99 matte black. 10¼" (26cm) OAL, 8¼" (21cm) long rail. 4.6 oz. (130g) PICATINNY RAIL MOUNTING SYSTEM weight. Includes mounting cross-bolts. #100-005-800AK Rem 870 Saddle Rail 5A74T48 . . $ 89.99 ST RATTON CUSTOM THOMPSON CENTER Lightweight, AIMTECH SHOTGUN SCOPE MOUNT One-Piece SCOPE BASE Construction With No-Drill, No-Tap Scope REMINGTON 870/1100/11-87 Strong Enough To Withstand Plenty Of Mounts Are Easy To Install The Sharpest Recoil Rail Space Lightweight mounts fit over and SHOTGUN SCOPE MOUNT attach to both sides of the receiver to Factory Mount For Weaver-style bases have CNC machined aluminum chassis with two integral, MIL- STD 1913 Picatinny rails lets you attach accessories such as give balanced support for any scope. Secure, Easy cross slots for two or three Built to withstand even hard-hitting rings; provide extra strength lights, lasers, and other tactical equipment to your pistol. Fea- Installation Of Optics tures a 41/8" long, 10-slot bottom rail and a 47/8" long, 12-slot top slug recoil. Installs in minutes; just to withstand the recoil of the Easy-to-install, alu- rail for a variety of options. Installs on the slide without modifi- remove the trigger group pins and re- hardest kicking calibers. Gives added flexibility when mounting place with bolts included. Accepts Weaver-style rings. ab minum scope mount pro- long or short scopes. Two styles: four-screw factory and six-screw cations to the gun, and secures with three Allen head screws for a ® ® SPECS: Aluminum, black, anodized finish. Approx. 6" (15.2cm) vides eight Weaver-type custom, to fit Encore and Contender barrels. Six-screw also rock-solid installation. Includes removable front and rear sights 1 ⁄2 cross-slots for mounting a scope or red dot sight on a Remington for use as back-up in case your optics fail. Rear sight is CNC long, 2 " (6.3cm) high. Includes bolts, wrenches, instructions. matches four-hole, factory spacing. Four screw Magnum Encore 12 gauge shotgun. Rail is raised nearly ½" for a comfortable, milled from a solid steel billet for long service life; front sight STOCK # FITS GA PRICE base eliminates the undercut in front for extra stiffness and heads-up cheekweld, with a forward cantilever for mounting the is machined from aluminum for reduced weight. Serrated rear strength when shooting heavy recoil magnum chamberings in #017-200-008AK Benelli M1 Super 90 12 7A36V39 $ 39.99 optic with plenty of eye-relief. To install, simply remove trigger sight features a slight reverse angle to reduce glare and improve your TC Encore. ab #017-200-013AK Benelli Super Blk Eagle 12 7A36V39 $ 42.99 group pins, position the mount over pin holes, and secure using sight picture. Adjustment screws ensure accurate, repeatable SPECS: Carbon steel, matte blue, or stainless steel (SS), matte the included replacement pins. click adjustments for windage and elevation. Fits all Mark II #017-200-009AK Browning Auto-5 12 7A30V12 $ 34.99 finish. 5" (12.7cm) long. SPECS: Aluminum, matte black. 7¼" (18.4cm) OAL, 6" (15.2cm) #100-002-188AK Contender Base, 4-screw, Blue, and Mark III pistols with 5½" bull barrel. ab #017-200-006AK Ithaca 37/87 12 7A31V68 $ 36.99 7 long rail, 1 ⁄8" (4.8cm) wide, 2½" (6.4cm) high. 4 oz. (113g) weight. 5K43Y86...... $ 47.99 SPECS: Aluminum, hardcoat anodized, matte black. 9½" (24cm) #017-200-001AK Rem. 1100/11-87 12 7A30V12 $ 35.99 1 Accepts Weaver-style rings only; 8 cross-slots. Fits right or left- long, 2¼" (5.7cm) high, 1 ⁄8" (2.8cm) wide, 11 oz. (312g) weight. #100-002-190AK Encore Base, 4-screw, Blue, #017-200-011AK Rem. 1100/11-87 Lt. 20 7A31V37 $ 36.99 handed 12 gauge Remington 870, 1100, or 11-87. Includes mounting Includes front & rear sights and instructions. Sights - Steel, blue, 5K43Y86...... 47.99 hardware, and instructions. matte finish. Rear Blade - .767" (19.5mm) wide .402" (10mm) high. #017-200-012AK Rem. 870, Lt. 20 7A31V37 $ 36.99 #100-000-520AK Encore Base, 4-screw, SS 5K52T14. . 56.99 #768-000-016AK Shotgun Scope Mount 8F41H31. . $ 44.99 #100-002-191AK Encore Base, 6-screw, Blue, Rear Notch - .11" (2.8mm) wide, .095" (1.8mm) deep. Front Blade - #017-200-002AK Rem. 870 12 7A30V12 $ 35.99 5K43Y86...... 47.99 .5" (12.7mm) long, .125" (3.2mm) wide, .44 (11.2mm) high. Fits all #017-200-003AK 12 7A30V12 $ 35.99 #100-004-966AK Magnum Encore Base, 4-screw, Blue, Ruger Mark II & Mark III pistols with 5½" bull barrel. #017-200-004AK Win. 1300 12 7A31V68 $ 36.99 WEAVEr rEMINGTON/MOSSBERG SHOTGUN 5K45V72...... 49.99 #930-000-052AK Picatinny Rail Mounting System, #100-004-965AK Magnum Encore Base, 4-screw, SS, 3Z263U33...... $ 299.99 NO-GUNSMITHING OPTIC MOUNT 5K53V79...... 59.99 B-SQUARE WARNE S&W REVOLVER SHOTGUN SADDLE MOUNTS Easy-To-Install, Low-Profile Sight Mount No Gunsmithing, Easy-to- TACTICAL SOLUTIONS BROWNING BUCK MARK MAXIMA MULTI SIGHT BASE Contoured To Fit Receiver install mount Use Scope Or lets you attach PICATINNY SCOPE MOUNT Firmly attaches to both sides of re- an optic or laser sight to your shotgun Heat-treated, CNC-ma- ceiver using existing screw/pin holes, without drilling, tapping, or making per- chined, steel scope mount and won’t obstruct operation. Re- manent alterations to the gun. Remove lets you install optics coil transfers to receiver for greater the two trigger group pins (Rem.), or the without sacrificing your strength. Weaver-style rail with mul- ejector screw and trigger pin (Moss.), slide on the mount, line iron sights. Includes a re- tiple slots provides plenty of eye relief up the holes, and secure it with the included replacement pins. Mount A Scope & Retain Iron Sights movable front sight and a Scope rings not included adjustment for scopes and electronic Low-profile, form-fitting design looks like part of the receiver sights. Open sight channel under the Lightweight, aluminum Picatinny rail replaces factory rib/ machined, rear sight re- and positions the sight close to the bore axis. Seven cross-slots rail allows continued use of iron sights. rear sight and lets you mount an optic while retaining the benefit cess that accepts the new-style, round-front, factory rear sight. in the 5" rail let you install an optic, Weaver top-mount rings, SPECS: Aluminum, anodized, black. Approx. 6" (15cm) long. Two of backup “iron” sights. Eight cross-slots let you position the optic Milled area on the underside of the base acts as a recoil lug. or other accessory, with plenty of flexibility in setting eye relief. 1" Weaver-style rings included. Rem 870/1100/11-87 fits 2¾" and for best eye relief. Integral open rear sight adjusts for windage Drilled holes make mounting easy on factory drilled and tapped Lightweight, yet rugged, reinforced molded polymer stands up 3" 12 gauge models. Rem 870 Magnum fits 3½" Magnum 870 12 and elevation. Drilled to fit the factory hole spacing and use the guns. Accepts Weaver-style rings. Standard Maxima fits K, L, to extreme weather conditions ranging from -40°F to 150°F. gauge shotguns only. original factory rib/rear sight screws. ab N and X frame revolvers. Maxima X Frame has extra metal up SPECS: Reinforced, injection-molded polymer composite, Black SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Ap- front and longer screws for improved recoil protection; fits X STOCK # FITS GAUGEPRICE or Realtree Hardwoods HD Camo. Includes mount, button head 13 15 proximately 5" (12.7cm) long, ⁄16" (21mm) wide, ⁄32" (12mm) high frame only. ab #122-000-009AK Benelli Super ejector screw, trigger group bolt, knurled nut, threaded insert, 3 1 from top of receiver. SPECS: CNC-machined steel, powder coat matte black or silver Black Eagle 12 Ga 6K49P99 $ 61.99 nylon-tipped set screw, ⁄32" and ⁄8" hex head wrenches, and instruc- 3⁄ #100-005-205AK Picatinny Scope Mount 8K00TPU. $ 74.99 finish. Approx. 5 4" (14.6cm) long. Maxima fits Smith & Wesson #122-000-001AK Benelli Nova 12 Ga. 6K81P56 $ 95.99 tions. Remington fits 870, 1100, 11-87; 12 and 20 gauge; right or K, L, N, and X frame revolvers. Maxima X Frame fits X frame only. left handed models. Mossberg fits 500, 835; 12 gauge only; right #947-000-100AK Maxima Base, Black 7D74P24 . . . $ 91.99 #122-460-005AK Browning A-5 12 Ga. 6K50H16 $ 70.23 handed models only. #947-000-101AK Maxima Base, Silver, #122-460-500AK Mossberg 500 12 Ga. 6K50H16 $ 70.23 #955-000-141AK Rem. Mount, Black 5E26A50. . . . $ 30.99 PAY ANY WAY 7D74P41...... 91.99 #122-460-870AK Rem 870/1100/11-87 12 Ga. 6K49H99 $ 72.99 #955-000-143AK Rem. Mount, Realtree Camo, #947-000-246AK Maxima X Frame Base, Black, 5E45A90...... 53.99 #122-000-047AK Rem 870 Magnum 12 Ga. 6K50P16 $ 70.23 7D74U24...... 91.99 #955-000-142AK Moss. Mount, Black 5E26A50. . . . 30.99 #947-000-247AK Maxima X Frame Base, Silver, #122-460-120AK Win. 1200/1300/ #955-000-144AK Moss. Mount, Reatree Camo, 7D74U41...... 91.99 1400/1500 12 Ga 6K50H16 $ 70.23 5E36A51...... 42.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 246 SINCE 1939 Office/Tech: 641-623-5401 B-SQUARE HAHN PRECISION MOSSBERG 500/590 RBC SHOTGUN Brownells UNIVERSAL CANTILEVER RIB MOUNT SHOTGUN ACCESSORY RAIL CANTILEVER SCOPE MOUNTING BASE DELRIN® RING REDUCERS Increases Accuracy Scope rings Rigid Mounting Increased Accuracy rings & bases not included Make Big Rings Accept Small Scopes For Slug Shooting Platform For For Slug-Shooting Mount the scope on the Hunting Or Shotguns Non-marring, Delrin sleeves surround scopes to adapt them to barrel. No gunsmithing; fits ribs Tactical Shotguns fit bigger-diameter rings. Black, matte finish won’t clash with 1 1 Attaches to the barrel your scope or gun. Reducers are sliced in half for easy, drop-on up to .380" with ⁄2" wide vents on 1 ⁄2" Precision-machined accessory rail lets and positions the scope installation onto virtually any brand of rings in the sizes listed c-to-c spacing. you mount optics, ghost-ring sights, lasers, back, over the receiver. Solders to non- SPECS: Aluminum, black, anodized finish. 11" (28cm) below. Sold as front-and-rear-ring sets. ab lights, night vision gear, and other tactical accessories on your ribbed barrels. MTF Base - Holes drilled, ra- SPECS: Kit includes front and rear reducer sets. Delrin, matte, long, 7.2 oz. (205 g) wt. Mossberg 500/590. Cut to true MIL-STD 1913 Picatinny specs dius left blank for custom applications. ab #122-161-750AK Cantilever Rib Mount 6K65H10. . $ 82.99 black finish. from 6061-T651 billet aluminum. Attaches to factory drilled and SPECS: Base - steel, blued. Rail - aluminum, #084-000-091AK 30mm To 1" Ring Rdcrs 4H14D71. $ 19.99 3 tapped receivers using the provided mounting screws. Low-pro- black. 5 ⁄4" (12cm) long, 3.8 oz. (109 g) wt. In- #084-000-092AK 1" To 7⁄8" Ring Reducers 4H16D03. . 19.99 BADGER ORDNANCE rEMINGTON 870/1100/11-87 file design with integral sight channel allows use of front sight structions included. Gunsmith installation recommended. Moss- #084-000-093AK 1" To ¾" Ring Reducers 4H14D70. . 19.99 when optics/accessories are removed. Extends forward over bar- berg 500 also fits M9200 and M5500 with plain barrels. Ithaca #084-000-094AK 30mm To 26mm Reducers 4H14D95. 19.95 TACTICAL SHOTGUN ACCESSORY RAIL rel for maximum mounting flexibility. Skeletonized underside 37/87 fits quarter rib or Deerslayer only. reduces weight without compromising rigidity or strength. Du- STOCK # FITS PRICE Expands Sighting Options rable, MIL-A-8625 “F” Type III Class 2 hardcoat anodized fin- For Tactical Shotguns ish for additional strength and superb wear-resistance. Safety #752-100-037AK Ithaca 37/87 12 & 20 Ga. 2E36X70 $ 49.05 Brownells SCOPE SHIM KIT #752-100-500AK Mossberg 500 12 Ga. 2E36X70 $ 49.05 Rigid accessory mounting Rail includes an integrated, oversized, ambidextrous tang safety Have The Right Shim, platform lets you install optics, ghost- that can be activated quickly and easily in high stress situa- #752-100-870AK Rem. 870 12 Ga. 2E36X70 $ 49.05 Right At Your Fingertips rings, red dot sights, and other accessories on tions. Safety design reduces stress on factory safety screw for #752-100-110AK 1100/1187 12 Ga. 2E36X70 $ 49.05 enhanced reliability. Standard Rail can also be adapted to other An economical and practical kit that your Remington tactical shotgun. Precision milled #752-100-000AK MTF Base 2E36X70 $ 49.05 from pre-hardened 4142 ordnance steel (Rc 28-32) to a true shotgun makes/models. ab provides a complete selection of scope MIL-STD 1913 Picatinny cut with a rugged mil-spec manganese SPECS: Aluminum, matte black hardcoat anodized finish. Requires shims. When “just a little more” height is drilling and tapping on early model Mossberg 500. Safety Rail - needed for perfect scope base and ring align- phosphate parkerized finish. Radiused underside fits contour of 11 13 3 9 ⁄16" (24.7cm) long, ⁄16" (2.1cm) wide, ⁄8" (9.2mm) tall. Standard WEAVER BENELLI TOP MOUNT BASE ment. ab receiver for positive engagement along the entire length of the 1 13 3 rail. Hole spacing matches pre-drilled receiver holes on factory Rail - 7 ⁄4" (18.4cm) long, ⁄16" wide, ⁄8" tall. One-Piece Base Increases SPECS: Steel, blued. Kit contains 10 of each hole spacing and thick- Tactical models; other models may require drilling and tapping. #100-002-506AK Mossberg 500/590 Standard Rail, Sight Options ness (80 total). Available in .600" (15.2mm) and .860" (21.8mm) c-to- Mounts securely to receiver with the hardened steel #8-40 Torx® 6K36C00...... $ 45.00 c hole spacing and .006" (.152mm), .008" (.203mm), .010" (.254mm), screws included in kit. ab #100-002-421AK Mossberg 500/590 Safety Rail, One-piece, precision machined Weaver rail lets you mount a .012" (.304mm) thickness. Refills sold 10 per pak. SPECS: Steel, parkerized finish, matte black. 5½" (14cm) long, .835" 6K68Z00...... 85.00 variety of optics on your Benelli shotgun. Two cross-slots provide STOCK # SIZE STOCK # SIZE 5 optimal ring spacing on a wide range of scopes, including ad- (21.2mm) wide, ⁄16" (7.8mm) high. Fits Remington 870, 1100, and vanced red dot optics. Low profile allows use of front sight, how- #080-814-606AK .600" x .006" #080-814-806AK .860" x .006" 11-87. Hole-spacing fits factory Tactical models; other models may MESA TACTICAL #080-814-608AK .600" x .008" #080-814-808AK .860" x .008" require drilling and tapping of receiver. ever optics may have to be removed. Lightweight aluminum is #093-000-030AK Rem 870/1100/11-87 Accessory Rail, SHOTGUN RECEIVER MOUNT hardcoat anodized for durability. Attaches to factory drilled and #080-814-610AK .600" x .010" #080-814-810AK .860" x .010" 3K100Z00...... $ 109.99 tapped receivers using the included steel mounting screws. ab #080-814-612AK .600" x .012" #080-814-812AK .860" x .012" PICATINNY RAIL SPECS: Aluminum, anodized, matte black. Steel mounting — Advise # — Shim Refill Pak 8K07C03. . . . . $ 9.99 7⁄ Mount Optics Or screws. 4 16" (15.8cm) long. Fits Benelli Super Black Eagle, Su- #080-814-000AK Scope Shim Kit 8K44C80 ...... 59.95 “DA-MAR” SHOTGUN SCOPE MOUNT per Black Eagle II, M1/M2 Field Guns, and Super Nova. Accepts Tactical Sights Weaver-style rings. Secure, Extra-Strong One-piece, MIL-STD #955-000-135AK Benelli Top Mount Base 5E07A12 . $ 8.99 EGW PICATINNY EXTRUSION Scope Mounting 1913 Picatinny rail al- Even On Thin, Semi-Auto lows mounting a variety of optics and tactical sights on popular Build Custom Scope Bases; Receivers Mossberg, Remington, and Benelli shotguns. Streamlined, low Brownells STEEL SHIM STOCK Saves Time & Money Wrap-around sub-base puts profile design installs to the top of the receiver for a smooth Picatinny cross-section alu- “built-in” appearance. Four steel, Allen head screws secure rail Solves Most “Need A Little the mounting screws into the More Metal” Problems minum rail stock gives you a receiver’s thicker sidewalls for rock-solid, no-fail scope mount- to receiver for exceptional holding power. Precision machined head start on building custom ing even on thin, semi-auto receivers. Drill and tap six, 6-48 from 6061-T6 aluminum, then mil-spec Type III hardcoat anod- For scope base adjustment, sight ad- scope bases. Pre-contoured, so holes, then cinch down the lightweight, aluminum, sub-base ized for added strength. Fits shotguns with factory drilled and justment, head-space adjustment and you need only cut to required length, mill cross-slots, radius the plate over the top radius. Aluminum top rail accepts all Weaver- tapped receivers or receivers custom drilled and tapped for 8-40 checking, restoration of misaligned parts underside (if needed), and drill mounting holes. Much easier style rings. ba threads. Not recommended for mounting optics on guns with soldering on for buildup, inletting tem- than machining from scratch from bar stock. Perfect for instal- ab SPECS: Aluminum, black anodized. Approx. 5" (12.7cm) long. 2.3 high-mounted telescoping stocks. plates, spacers. You name it, and some- lations that require special ring positioning. Place cross-slots oz. (64 g) approximate wt. Includes screws and instructions. SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte where along the line a shim can be used only where you need them; dovetail contour accepts Picatinny black. Fits factory drilled and tapped receivers. Includes mounting for everything from shimming, to measuring, to fixing! ab or Weaver-style rings. Channel down the center keeps weight to STOCK # BASE# FITS hardware and instructions. Mossberg – 5½" (13.9cm) long. Fits 3 1 a minimum without compromising rigidity. ab #483-100-001AK #1 Rem. 870/1100/11-87/58/11-48. 12 Ga. (2 ⁄4"), Ithaca 1997 and later-mfr shotguns; can be installed on 930 KIT No. AC-24 consists of one piece, each, steel shim stock, 2 ⁄2" SPECS: 6061 T6 aluminum. 24" (61cm) long, .655" height. 51, SKB 20 Ga. S&W 1000, Brwning 2000, Franchi semi-auto with additional fitting. Remington 870 – Available in 5½" x 6" in the following thicknesses: #296-000-098AK Picatinny Extrusion 6B16Z49. . . $ 19.95 20 Ga. (receiver length) and extended 9" (22.8cm) lengths. Drop-in fit to .001" .002" .003" .005" .010" .015" #483-100-002AK #2 Rem. 870/1100 LT 20, 11-87 20 Ga. 870; can be installed on 1100 or 11-87 semi-auto with additional fit- #080-544-024AK AC-24 Steel Shim Stk Kit 8K13B39.$ 19.99 #483-100-007AK #7 Browning B-80 12 Ga., Beretta 302/390/1200, SKB, ting. Benelli M2 - 4½" (11.4cm) long. Drop-in fit on M2 Tactical; can ATLAS METAL PRODUCTS Weatherby 82/92,.Charles Daly, Win. 1200/1400, also be installed on round-top M1 after drilling and tapping receiver. KIT No. AF-12 consists of one piece, each, steel shim stock, 6" x #100-004-034AK Mossberg Receiver Rail, PICATINNY BASE STOCK Browning Gold 12, Franchi 12 ga., Mossberg 12" in the following thicknesses: 5A33P49...... $ 39.99 9200/835, Benelli Super 90, Win. Super X2. Create Custom Accessory & Optics Bases #100-005-801AK Rem 870 Receiver Rail, 5½", .001" .0015" .002" .003" .004" .005" — Advise # — Shotgun Mount 3H41P21...... $ 54.95 For Tactical & Sporting Applications 5A33T49...... 39.99 .006" .007" .008" .010" .012" .015" #100-005-802AK Rem 870 Receiver Rail, 9", #080-544-012AK AF-12 Steel Shim Stk Kit 5A50B38.$ 62.99 Six inch and twelve inch 5A41T96...... 49.99 HAVLIN MOSSBERG 500/590/835 long, aluminum stock has #100-005-803AK Benelli M2 Receiver Rail, WEAVER a wide, flat base that lets SCOPE RAIL 5A36T00...... 39.99 PARTS KIT you create unique mounts All The Parts You Need to fit any application. Precision machined cross slots accept Solid & Lightweight For Mounting Picatinny-spec optical sights, night vision devices and other ac- Scopes & Other Optics Handy collection of replacement cessories, plus Picatinny and separate, Weaver-style rings for to match the anodized or black painted Mossberg receivers. Ac- parts and screws for all Weaver scope mounting. ab Weaver-style scope mounting rail matches the cepts all Weaver-style scope mounts and accessories. ab Scopes and Mounts. Inc­ ludes top SPECS: 6061 aluminum, black anodized. .394" (10mm) slot spac- 5 top contour on all Mossberg 500/590 and 835 models for SPECS: Aluminum, black, anodized finish. 5" (12.7cm) long. 2 oz. straps, saddles, thumb screws, mount ing. 5.7" (14.2cm) or 12" (30.4cm) long. 1" (2.5cm) wide, ⁄8" (16mm) a durable, no-gap installation. Held by four, 8-40 tpi machine (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation re- clamps and various screws. ab high base. screws that stand up to recoil without deformation or stripping. quires drilling and tapping on early model Mossberg 500. SPECS: 320 pieces in 12 compartment bench box. #100-000-682AK 5.7" Picatinny Base Stk 7K21H12. $ 28.16 Machined from lightweight, extruded aluminum, and anodized #100-002-901AK Mossberg Scope Rail 6A14T00 . . $ 16.95 #955-200-250AK Weaver Parts Kit 5E42Z71. . . . $ 62.99 #100-000-804AK 12" Picatinny Base Stock 7K44Y34 . 56.42 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 247 EGW PICATINNY B ASE STOCK POWER CUSTOM CALCULATING REQUIRED SCOPE RING HEIGHT Build A Custom Base In BLANK SCOPE RING BASE STOCK The following formula provides a quick and effective way to determine proper scope ring height for Steel Or Aluminum; Weaver-Style Or Picatinny Profile; the majority of scope mounting applications.There are a few applications where the barrel contour Pre-Cut Slots Speed The Job Ready To Machine For Custom Installations will allow the scope to be mounted slightly lower than the calculated measurement, and other instances Scope base stock is ma- Blank aluminum stock has a milled center chan- where a heavy barrel equipped with a rear sight may require a slightly higher scope ring height than chined to MIL STD 1913 Weaver nel for lighter weight without reducing strength. Picatinny dimensions for fab- calculated. An alternative to using the formula provided here is available in the Determining Scope Just cut to required length, mill the cross slots, ra- ricating custom rifle or handgun optic bases. Pre-cut cross-slots Ring Height video at brownells.com. dius the underside (if needed) and drill the mount- speed the job and allow use of any Picatinny scope rings. Ideal ing holes. Plenty of thickness allows machining to for quickly building a versatile base for a gun with non-stan- fit most revolver top straps and receivers. Avail- dard hole spacing, rather than drilling new holes in the receiver. Picatinny able in Weaver or Picatinny profiles. ab Available in pre-hardened steel or aluminum, both with a matte

rings & bases SPECS: 6061 T6 aluminum, unfinished. Available in black finish. Bottom of the base is flat, so it can be radius cut to 9 9" (22.8cm), or 18" (45.7cm) lengths. Weaver - ⁄16" (14.3mm) thick, fit any receiver contour. ab 5 6.1 oz. (173g) or 12.3 oz. (348g) weight. Picatinny - ⁄8" (1.59cm) A SPECS: 4140 pre-hardened steel, blued, or 7075 T6 aluminum, thick. 6.5 oz. (184g) or 13 oz. (368g) weight. hardcoat anodized, matte black. 7¾" (19.7cm) long, 1" (2.5cm) wide #713-065-009AK 9" Weaver Scope Ring Base Stock, base, ¾" (1.9cm) high. 3A10H42...... $ 11.99 D B #296-000-144AK Steel Picatinny Rail Stk 6B59X79. $ 69.99 #713-065-018AK 18" Weaver Scope Ring Base Stock, C #296-000-145AK Alum. Picatinny Rail Stk 6B51X43 . 59.99 3A19H44...... 21.99 #713-000-113AK 9" Picatinny Scope Ring Base, 3A11Y11...... 12.99 Brownells DOVETAIL SCOPE BASE #713-000-112AK 18" Picatinny Scope Ring Base, Fits All Ungrooved .22s; 3A19Y44...... 21.99 Available In Two Diameters A = Outside diameter C = Base Height: *NOTE: Subtract known height of the front base from Brownells Dovetail A.R.M.S., INC. M14/M1A Scope Base gives you of scope objective end. Distance from top of Dimension B in table to determine the actual ring height. receiver to top of front the ability to update M21 SCOPE MOUNT OBJECTIVE *1" SCOPE *30mm SCOPE scope base. any of those millions of DIAMETER TUBE TUBE older .22 to accept Solid, Low-Profile Picatinny modern rimfire optics. Mount; Easy To Install B = Distance between D = Ring Height: DIMENSION A DIMENSION B DIMENSION B Made of tough, durable, aluminum; black anodized to compli- top of receiver (where Identical to the scope mount Distance from top .984" (25mm) 0" (0mm) --- ment blued . Solid, rigid support. Accepts all tip-off rings shown) and bottom of 3 used on U.S. Military M21 Sniper of base to bottom of 1.023" (26mm) .011" (.27mm) --- designed for ⁄8" nominal dovetailed receivers. Pre-drilled and Rifles, this low-profile mount pro- scope tube. scope tube. countersunk to accept three 8-40 screws (included). Drill and 1.062" (27mm) .031" (.78mm) --- vides a solid, secure 9-slot, MIL- tap receiver to mount. See our 12" long base stock below for all 1.102" (28mm) .051" (1.29mm) --- STD 1913 Picatinny rail for plenty of options in scope instal- those special applications. ab 1.141" (29mm) .071" (1.80mm) --- lation. No gunsmithing to install; clamps to grooves already in SPECS: Aluminum, black, anodized. 840‑4 - .840" (21.3mm) dia. the receiver, with a third contact point for additional stability Scope Ring Height Formula: B – C = D 1.181" (30mm) .091" (2.31mm) --- fits all small ring .22s with receiver dia. less than 1" (2.5cm). 100‑4 to ensure this mount will not move under hard recoil. Receiver 1.220" (31mm) .111" (2.81mm) --- - 1" dia. fits the larger receivers of 1" and 1.05" (2.7cm). Both are plate screw and barrel ring stop are retained with C‑clips to 1.259" (32mm) .130" (3.30mm) --- 4" (10.2mm) long. prevent loss. Won’t interfere with your rifle’s iron sights. NSN 1.299" (33mm) .150" (3.81mm) --- #080-029-844AK 840-4 Dovetail Base 8K04D86 . . . $ 8.99 #1240-01-316-0055. ab PROCEDURE 1.388" (34mm) .169" (4.29mm) --- #080-030-104AK 100-4 Dovetail Base 8K03D81 . . . . 5.99 3 SPECS: 8620 steel, Parkerized, matte black. 4 ⁄8" long. 6.5 oz. 1.377" (35mm) .189" (4.80mm) --- dovetail SCOPE BASE stock - 12" lengths of blank Dovetail (184g) weight. Fits M14-type rifles and clones with mil-spec re- 1) Measure the outside diameter of the scope 1.417" (36mm) .209" (5.30mm) --- Scope Base Stock—just the ticket for all those strange and chal- ceivers. Installation instructions included. objective (A). If using scope covers, make this lenging scope mounting jobs your customers just keep bringing #100-004-842AK M21 Scope Mount 3A159V99. . . $ 169.99 1.456" (37mm) .228" (5.79mm) --- in. Simply cut to length, drill and countersink, then refinish ex- measurement with the front scope cover in place 1.496" (38mm) .248" (6.29mm) --- posed ends with our Aluma-Hyde™ or Baking Lacquer. Accepts to ensure proper clearance. 1.535" (39mm) .268" (6.80mm) --- 3 rings that fit a ⁄8" nominal dovetail. Contoured stock (same base A.R.M.S. FAL/L1A1 NOTE: Not all scope objectives measure exactly 1.574" (40mm) .287" (7.28mm) .197" (5.00mm) diameters as our 4" Base) for the more conventional rifles; Flat 1.614" (41mm) .307" (7.79mm) .217" (5.51mm) stock can be shaped, milled, shortened and adapted to even the PICATINNY SCOPE MOUNT as advertised by the manufacturer, so we recom- 1.653" (42mm) .327" (8.30mm) .237" (6.01mm) most exotic application. Integral Rail Mounts mend measuring with a precision caliper. SPECS: All are 12" (30.48cm) long, Contoured - 840-12, .840" 1.692" (43mm) .346" (8.78mm) .257" (6.52mm) 1 Optics Or Tactical Sights (21.3mm), or 100-12, 1" dia. base contour. Flat - ⁄2" (12.7mm) wide. 1.732" (44mm) .366" (9.29mm) .276" (7.01mm) #080-031-841AK 840-12 Contoured Stock 8K08D03 . $ 9.99 Heavy duty, one-piece 2) Find the objective diameter (A) for your scope 1.771" (45mm) .386" (9.80mm) .296" (7.51mm) #080-032-101AK 100-12 Contoured Stock 1B08D03 . . 9.99 dust cover with integral in the table to the right. 1.811" (46mm) .406" (10.31mm) .316" (8.02mm) #080-032-120AK Flat Stock 1B08D03...... 9.99 Picatinny rail provides a rock-solid platform and optimum 1.850" (47mm) .425" (10.79mm) .335" (8.50mm) mounting flexibility for scopes or tactical sights. MIL-STD 1913 rail accepts both Picatinny and Weaver-style mounting com- 1.889" (48mm) .445" (11.30mm) .355" (9.01mm) MOUNTING SOLUTIONS PICATINNY RAIL ponents. Over 8½" long to provide plenty of mounting space, 3) Find the corresponding scope clearance di- 1.929" (49mm) .465" (11.81mm) .375" (9.52mm) BLANK even for long body scopes. Rigid, extruded aluminum body with mension (B) in the table for the tube diameter 1.968" (50mm) .484" (12.29mm) .394" (10.00mm) riveted, internal steel frame rails for extra support. Hardcoat (1" or 30mm) of your scope. 2.000" (51mm) .500" (12.70mm) .414" (10.51mm) For Custom Mounting Of Accessories & Optics anodized for durability. Models available for standard and para- 2.047" (52mm) .524" (13.30mm) .434" (11.02mm) trooper actions. Paratrooper features a steel, recoil spring rod 2.086" (53mm) .543" (13.79mm) .454" (11.53mm) CNC machined to true Picatinny dimensions, these cut-to- riveted in place for use with folding stocks only. Fits inch and 2.125" (54mm) .563" (14.30mm) .473" (12.01 mm) length blanks provide unlimited accessory or scope mounting metric pattern FAL/L1A1 and clones. ab 4) Measure the front base height (C) with a cali- options for custom applications. Bases are left undrilled for SPECS: Extruded aluminum, hardcoat anodized, matte black with per or find this dimension in the manufacturer's 2.165" (55mm) .583" (14.80mm) .493" (12.52 mm) fitting to guns with non-standard hole spacing or those need- 5 7 2.204" (56mm) .602" (15.29mm) .513" (13.03mm) steel rails. 8 ⁄8" (21.8cm) long x 1 ⁄16" (3.6cm) wide. Standard - 7 oz. literature. ing special ring positioning. Precision crossslots easily accept (198g) weight. Paratrooper - 7.4 oz. (210g) weight. Fits FAL/L1A1 2.244" (57mm) .622" (15.79mm) .532" (13.51mm) Picatinny or Weaver-style accessories and scope rings. Open top and clones with inch or metric pattern receivers. 2.283" (58mm) .642" (16.30mm) .552" (14.02mm) design reduces weight without sacrificing strength. Available in #100-004-124AK Standard FAL Scope Mount, 5) Subtract the known front base height (C) from 2.322" (59mm) .661" (16.78mm) .572" (14.52mm) 55/8", 9", and 18" lengths. ab 1K106X76...... $ 134.99 5 2.362" (60mm) .681" (17.29mm) .591" (15.01mm) SPECS: 6061 T6 aluminum, natural, matte finish. 5 ⁄8" (14.3cm), #100-004-125AK Paratrooper FAL Scope Mount, dimension (B) to determine the required ring 5 2.401" (61mm) .701" (17.80mm) .611" (15.51mm) 9" (22.8cm), or 18" (45.7cm) long, .206" (10mm) slot width, ⁄8" 1K119X49...... 149.99 height (D). (1.59cm) high from top of receiver to bottom of dovetail. Mounting 2.440" (62mm) .720" (18.28mm) .631" (16.02mm) holes not drilled. For more choices of A.R.M.S. MOUNTS 2.480" (63mm) .740" (18.79mm) .651" (16.53mm) #100-003-790AK 55/8" Rail Blank 1K22A49. . . . . $ 29.95 2.519" (64mm) .760" (19.30mm) .670" (17.01mm) #100-003-789AK 9" Rail Blank 1K34A95...... 49.95 Instructional video available at brownells.com visit brownells.com 2.559" (65mm) .780" (19.81mm) .690" (17.52mm) #100-003-788AK 18" Rail Blank 1K60A45...... 79.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 248 SINCE 1939 Office/Tech: 641-623-5401 ® ADVANCED TECHNOLOGY MOSIN NAGANT AMEGA RANGES Brownells BURRIS RUGER SCOPE MOUNTING SYSTEM MINI-SCOUT-MOUNT PICATINNY SCOPE BASE WEAVER ADAPTER Convert Nagants Into Allows Forward Lets You Use Weaver-Style Rings rings & bases Practical Hunting Rifles Mounting Of Optics & Cross-Slot System Provides On Ruger Rifles & Revolvers Accessories; Helps Solid, Versatile Mounting On Everything you need to Tactical & Sporting Rifles Gives you a wider selection of mount a scope on the split Control Barrel Vibration available rings. Extra slots expand receiver of Mosin Nagant Rock-solid, precision Rugged, one piece design mounting options. Securely clamps to rifles and handguns; ma- rifles and carbines. Instruc- machined, aluminum provides a rock-solid base for chined for Ruger factory rings. ® tions explain all the how-to steps. Includes base, bolt handle and mount provides plenty of top rail space for secure attachment scope rings with greater flexibility than traditional ring-and- SPECS: Steel, polished blue finish. M77 fits M77 rifles, Super ® drills and taps. Accepts Weaver-style rings. of forward-mounted optics. Directly replaces the factory hand- base systems. Slots cut to true MIL-STD 1913 specs accept both Redhawk . Set of two bases, 1.375" (35.9mm) long and 1.980" ® ® ® SPECS: Bolt Handle: Stainless steel, polished finish. Scope Base: guard/dust cover on Ruger® Mini-14®/Mini-Thirty®, M14, M1A, Picatinny and many Weaver-style rings to increase your scope- (50.3mm) long. 77/22 fits Redhawk Hunter, Blackhawk Hunter, ® ® ® ® ® T-6 Aluminum, black anodized. 6" (15.2cm) long. 2.9 oz. (82g) wt. and M1 Garand with no permanent alterations to gun. Attaches mounting options on both tactical and sporting rifles. Easily 77/22 , 77/44 , 77/50 , Model 96™ (.44 Mag), 10/22 Mag, Mini-14 , Gunsmith installation recommended. directly to barrel above the forearm on Ruger 10/22®. Under- alter the spacing between the rings to accommodate different- Deerfield, and No. 1. Set of two 1.980" long bases. #019-100-010AK Mosin Nagant Mount 9A49H51. . $ 54.99 barrel clamp mounts tight to barrel to improve barrel rigidity length scope bodies, and adjust eye relief to fit the specific needs #118-410-990AK M77 Weaver Adapter 8A28H00. . . $ 40.00 and harmonics, so you gain optimal accuracy from your . of each shooter. Installs quickly using factory drilled scope base #118-410-991AK 77/22 Weaver Adapter 8A28H00 . . . . 40.00 Rail accepts Picatinny or Weaver-style rings and features a full- holes and screws—no drilling and tapping on most guns. Under- AIMTECH MINI-14 & 30 SCOUT RAIL length sight channel that allows use of iron sights when optics side of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision ma- CNC SPECIALTIES Very Fast Sighting are removed. Mini-14 fits pre-580 series rifles with straight taper barrel and Mini-14/Thirty fits all 580 Series rifles with chined from 4140 billet steel for superb strength and stability, or MAUSER 98 SCOPE MOUNT For Close Range heavy flanged barrel, including NRA model, Target, 6.8 SPC, aluminum models machined from 6061 T6 billet for maximum Varmint Hunting and Mini-Thirty® (7.62 x 39). Other models available for 10/22 weight reduction. Matte, black, anodized finish blends with most Low Profile, carbine; M14/M1A with U.S. mil-spec, standard contour barrel factory finishes. Models available for Remington, Winchester, No Gunsmithing Replaces the and Savage short action (SA), long action (LA), and Winchester with a Picatinny-style rail or Springfield Armory standard weight barrel only; M1 Garand Design For L.E.R. with USGI military spec barrel, including Tanker model and Short Magnum (WSM) receivers, plus military Mauser 98 rifles. Scopes & Red Dots that securely clamps to the barrel. Iron sights remain usable; 20 MOA models have built-in 20 MOA elevation to help you get no modifications to rifle. ab BM-59; and U.S. mil-spec M1 Carbine, including recent models manufactured by Kahr Arms. ab enough elevation for accurate long-range targeting without ex- Attractive scope base blends beautifully with the lines of a SPECS: 6000 series, aluminum, black anodized. 9" (22.7cm) long. ab SPECS: Aluminum, hardcoat anodized finish, matte black. Mini-14 ceeding the elevation adjustment of your scope. Mauser 98 and provides a super strong platform to install your 14.3 oz, (405 g). Accepts Weaver-style rings. 7 SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat optics firmly with no alterations to your rifle. Replaces the rear #017-300-014AK Mini-14 Scout Rail Mount, - 10" (25cm) long, 1¾" (4cm) wide, ⁄8" (2cm) high. 9.3 oz. (264g) weight. Fits early model Ruger Mini-14 with 180 to 198 serial num- anodized matte black. Steel Models - 4140 billet steel, matte black sight slide and gives you a solid base with five milled slots to 7A67V72...... $ 79.99 ™ ber prefix and non-flanged, straight taper barrel, including Ranch oxide finish. Savage fits models with AccuTrigger . Mauser 98 fits securely mount and position long eye relief handgun or scout #017-300-001AK Mini-30 Scout Rail Mount, ® Rifles. Mini-14/Thirty fits 580 series Ruger Mini-14/Mini-Thirty military rifles; requires drilling and tapping of receiver; four (4) Torx scopes, plus red dot optics. Accepts Weaver-style rings and no 7A67V72...... 79.99 head screws included. Winchester models fit post-’64 rifles. gunsmithing required. ba with heavy flanged barrel, chambered in .223, 6.8 SPC, or 7.62 x 13 SPECS: Anodized aluminum. Matte black. 4" (10.2cm) long, ⁄16" 39mm. 10/22 carbine with .22 LR, factory barrel. M14/M1A - 12¾" STANDARD PICATINNY BASES 3 7 3 ⁄16 (32.4cm) long, 1 ⁄8" (4.8cm) wide, 1 ⁄16" (3cm) high. 15.3 oz. (434g) (20.6mm) wide. " (4.7mm) tall. (2) mounting screws and (2) roll B-SQUARE FITS STK # ALUMINUM STK # STEEL weight. Fits M14/M1A rifles with U.S. Mil-Std contour barrel and pins included. 3 #100-002-420AK Mauser Scope Mount 4A29Z95. . $ 39.95 /8" DOVETAIL-TO-WEAVER ADAPTER Springfield Armory STANDARD weight barrels only. WILL NOT fit Mauser 98 #080-000-393AK #080-000-402AK heavier Springfield Armory SOCOM type barrels or any Chinese Rem 700 SA #080-000-391AK #080-000-399AK Allows Mounting Weaver-Style Rings manufactured barrels. M1 Garand fits USGI military spec barrels, Rem 700 LA #080-000-392AK #080-000-400AK D.S. ARMS FN-FAL On Dovetailed Receivers SA-58 SCOPE MOUNT including Tanker models and BM-59. M1 Carbine - 8" (20.3cm) long, Savage Model 10 SA #080-000-394AK #080-000-403AK 1¾" (4.4cm) wide, ¾" (1.9cm) high. 8.4 oz. (238g). Fits all U.S. mil- No Gunsmithing, Lets you choose from a wide selection Savage Model 110 LA #080-000-395AK #080-000-401AK of Weaver-style rings for receivers with spec M1 carbines, including those manufactured by Kahr Arms. Sturdy Base 3 #100-003-202AK Mini-14 1B114C51...... $ 139.95 Winchester 70 SA #080-000-398AK #080-000-405AK nominal ⁄8" dovetail. Secure, single-slot, For Optical Sights #100-004-361AK Mini-14/Thirty 1B124X97 . . . . . 149.95 two-piece design allows perfect ring spac- Winchester 70 LA #080-000-397AK #080-000-404AK #100-004-403AK Ruger 10/22 1B99Y97...... 119.95 It takes only a few ing every time and easy access to chamber. Winchester 70 WSM #080-000-396AK #080-000-406AK minutes to replace the dust cover with this solid aluminum 1 #100-003-203AK M14/M1A 1B197C75 ...... 239.95 SPECS: Aluminum, black matte finish. Each base measures 1 ⁄2" #100-004-404AK M1 Garand 1B133Y25 ...... 159.95 – Advise # – Picatinny Base, Aluminum 8K39Z97. . $ 49.97 mount. Clamps to frame with five, internal steel rails; provides (3.81cm) long. a rock solid base for mounting even the largest scopes. Picatin- 3 #100-004-465AK M1 Carbine 1B126P88...... 149.95 – Advise # – Picatinny Scope Base, Steel 8K79Z97. . . 99.97 #122-000-011AK ⁄8" Dovetail to Weaver Adapter, ny-style rail provides optimum mounting flexibility for scopes 6K27P10...... $ 29.99 20 MOA PICATINNY BASES or electronic sights. Drilled to accept Brass-Savr Bag. Made in BADGER ORDNANCE FITS STK # ALUMINUM STK # STEEL the U.S.A. Fits inch- and metric-pattern receivers. Paratrooper Rem 700 SA #080-000-763AK #080-000-765AK mount features a removable recoil spring guide rod for use with BENCH-SOURCE SAVAGE SCOPE BASES MAXIMIZED SCOPE RAIL folding stock rifles only. Lets you remove the bolt and carrier Rem 700 LA/Howa #080-000-764AK #080-000-766AK without removing the mount and risking loss of zero. ab Standard Or 20 MOA Forward Cant Lets You 1500/Wby Vanguard Zero At Extended Range SPECS: 6061-T6 Aluminum, matte black finish. Accepts Weaver- Elevation For Short & – Advise # – 20 MOA Picatinny Scope Base, Aluminum, style rings. 8.5" (21.5cm) long. 11 oz. (313 g) weight. Long Range Competition Heavy steel base with 8K50Y72 ...... $ 59.99 #274-100-058AK SA-58 Scope Mount 4G72C31. . . $ 89.99 – Advise # – 20 MOA Picatinny Scope Base, Steel, Lightweight, one-piece 20 M.O.A. forward angle #274-000-014AK SA-58 Paratrooper Mnt 4G97C95. . . 124.85 8K92Y54 ...... 109.99 base with integral Pica- increases maximum scope elevation for long range shooting. Machined after hardening to maintain dimensions. Integral re- tinny rail fits Savage short REMINGTON 700 HEAVY DUTY PICATINNY BASE - Same one- ® ® coil lug withstands the hardest kicking calibers. Uses MIL-STD DLASK ARMS rUGER 10/22 action benchrest rifles. Standard model is intended for ranges piece, aluminum design as our standard Picatinny scope bases, 1913 Picatinny slot pattern for maximum sight mounting pos- from 50 to 300 yards, 20 MOA model provides an additional 20 with oversized, 8‑40 tpi mounting screws for greater gripping sibilities. Remington Zero Cant does not have 20 M.O.A. forward PICATINNY SCOPE MOUNTS minutes-of-angle in elevation for hitting targets beyond 400 that’s ideal for heavy, long-range scopes. Requires drilling and angle. For use where extra elevation is not required. Fits 700 Picatinny Rails For yards. Precision machined from 7075 T6 aluminum for strength tapping factory receiver holes to accept larger screws. Models to short action only. ab Ruger® 10/22® Rifles and durability. Length and width tolerances vary less than .002" 1 fit short and long action 700s, in standard or extended height with SPECS: 4142 steel, black, matte finish. 7 ⁄8" (18.1cm) long, 5.6 oz. to help center the scope to the bore and minimize initial adjust- an extra 20 MOA elevation for those extremely long range shots. (158 g) wt. Rem Zero Cant - 6¼" (15.9cm) long. 4.9 oz. (138g) wt. Tough, lightweight ments. Four, steel Allen head screws secure the base to the re- SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. In- #093-306-070AK Rem 700 Long Action 3K132A88. $ 150.50 aluminum rails feature ceiver and provide exceptional holding power. Fits Savage round cludes four steel, 8‑40 tpi Torx® mounting screws. Requires drilling #093-306-060AK Rem 700 Short Action 3K139A99. .149.99 Picatinny slot spacing for fast, simple changes to eye relief, top, short action receivers using factory pre-drilled scope base and tapping of receiver to accept 8‑40 tpi screws. Standard and #093-000-012AK Rem. 700 SA Zero Cant 3K132Z67 . 150.00 plus greater flexibility in scope choice. Three height choices fit holes. Accepts Picatinny and Weaver-style rings. ab extended 20 MOA heights to fit Remington 700 short action (SA) various objective sizes, or improve cheek weld. Extends over the 3 #093-000-018AK Savage 10 Accu-Trigger, SPECS: 7075 T6 aluminum, silver. Steel, 6-48 tpi x ⁄8" mounting or long action (LA). barrel, or can be reversed to better position optics with shorter 13 3K133Z35...... 157.00 screws. 6" (15cm) long x ⁄16" (2.1cm) wide. 1.9 oz. wt. Standard - #093-000-005AK Win 70 Long Action 3K133Z35 . . .157.00 #080-000-759AK Rem. 700 SA HD Base, Standard, eye-relief. .750" model has an open sight channel that lets you .41" (10.4mm) high. 20 MOA - .38 -.41" (9.6-10.4mm) high, tapered. #093-000-006AK Win 70 Short Action 3K133Z35. . .157.00 8K38Y54...... $ 49.99 use the factory sights. Uses the factory-drilled scope base holes, Fits Savage round top, short action receivers using factory pre- #080-000-760AK Rem. 700 LA HD Base, Standard, with no permanent alteration to your rifle. 5 drilled scope base holes. 8K38Y54...... 49.99 SPECS: Aluminum, hardcoat anodized, black. 6 ⁄8" (16.2cm) long; #100-004-446AK Picatinny Scope Base, Standard, SINCLAIR = PRECISION #080-000-761AK Rem. 700 SA HD Base, 20 MOA, .375" (.95cm), .500" (1.3cm), or .750" (1.9cm) tall. 4Z68Y00...... $ 84.99 8K52Y04...... 65.99 #253-000-003AK Scope Mount Rail, .375" 3E27P69. $ 35.99 #100-004-447AK Picatinny Scope Base, 20 MOA, Shop online at sinclairintl.com #080-000-762AK Rem. 700 LA HD Base, 20 MOA, #253-000-004AK Scope Mount Rail, .500" 3E27P69. . 35.99 4Z68Y00...... 84.99 8K52Y04...... 65.99 #253-000-005AK Scope Mount Rail, .750" 3E27P69. . 35.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 249 EGW ONE-PIECE SCOPE MOUNT FARREL INDUSTRIES SCOPE BASES FULTON ARMORY M14/M1A KWIK-SITE KWIK-MOUNT® ADAPTER BASE Models No Frills Accuracy Enhancement For Precision-Machined PICATINNY SCOPE MOUNT Lets You Use Weaver-Style 3 Rifles & Shotguns Rings On Any ⁄8" Quality & Secure, Stable, No-Gunsmithing Dovetailed Receiver Add the versatility of Innovative Design Scope Attachment a one-piece Picatinny Weaver-style conversion Scope bases precision One piece, steel mount provides scope rail to your rifle or bases let you mount optics CNC-machined from a secure, stable scope base that shotgun with no drilling or tapping. Precision machined from ex- solid bar stock are held on any .22 caliber rifle with a won’t shift between shots. Rock- 3 truded aluminum or hardened steel with Picatinny slot-and-rail ⁄8" dovetailed receiver. One- to .002" tolerances to create an exceptionally flat, straight, solid solid, three-point mounting sys- spacing that allows fast and simple changes to eye relief, plus piece model has eight slots platform for optics. Accepts Picatinny and Weaver-style rings. tem attaches to the factory scope great flexibility in scope choice. Some models available with 20 that allow you to vary the Bedding-compound groove helps you get an exact, base-to-re- mount screw hole in the receiver or 30 MOA built-in elevation to aid in long-range shooting with- ® ring spacing and mount a variety of different eye-relief scopes. ceiver fit. Self-centering Torx head screws and chamfered screw and the charger guide dovetail, while the setscrew at the front out maxing out scope elevation adjustment. Fits factory scope holes help prevent slippage under recoil. Available in one-piece Two-piece model, with a single slot on each base, ensures the cor-

rings & bases uses the receiver ring as a stop to prevent forward movement. mount holes on receiver. Accepts Picatinny or Weaver scope rings. rect ring spacing, while preserving easy access to the chamber. Standard or one- and two-piece 20 MOA (20 minutes built-in No drilling or tapping required; mounting hardware included. Lightweight Tactical mounts have a milled center channel for Made of aluminum to keep additional weight to a minimum with elevation) models. ab Machined from the same type of steel as the M14 receiver, so weight reduction; hex-head mounting screws and Allen wrench 7 steel cross-bolt and clamping bar for a tight hold. ab SPECS: Steel, black oxide finish. ⁄16" (11mm) high from bottom mount and receiver expand at the same rate as the gun heats included. Heavy Duty mounts are .100" lower than the Light- 7⁄ SPECS: Aluminum with steel hardware, matte black finish. to top of base. Remington 700 Short 1-Piece - 5 16" (13.8cm) up to help keep your optic zeroed during prolonged fire. Thirteen weight mounts to minimize weight and keep your optic closer 13⁄ 1-Piece - 4.3" (10.9cm) long. 2-Piece - .8" (2.1cm) long, each. long, 16" (21mm) wide; others will vary. Savage RT fits round MIL-STD 1913 Picatinny cross-slots offer plenty of versatility in to the barrel centerline for improved accuracy. Full-width cross- #100-005-941AK 1-Piece Adapter Base 8B23X17. . .$ 27.99 top receiver of Savage AccuTrigger models. Savage 10 and 110, setting eye relief. Sight channel allows use of iron sights without slots are gauged to MIL-STD 1913 specs to +/-.002". Machined #100-005-940AK 2-Piece Adapter Base 8B09X31. . . 10.99 both old models and RT, also fit corresponding Savage models from removing the scope. Cutout above ejection port helps prevent from ultra-rigid, extruded 7075 T6 aluminum or 4140 chrome- 10/110-16/116 series. moly steel. Includes socket head Torx® screws and wrench. ab case hangups. SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, 1-PIECE STANDARD BASES SPECS: 8620 steel, Parkerized, matte black finish. 5½" (14cm) long, NIGHTFORCE matte black finish. Includes socket head Allen screws and wrench. STK # FITS STK # FITS 1½" (3.8cm) wide, 2" (5.1cm) tall. 11.6 oz. (329g) weight. All mount- ing hardware included. Minor fitting required. Heavy Duty - 7075 T6 aluminum, mil-spec hardcoat anodized, or #100-001-056AK Win. 70 Long #100-001-064AK Sav. 10 Short TAPERED PICATINNY BASES 4140 chrome-moly steel pre-hardened to Rc 32-35, mil-spec Parker- #100-005-275AK Scope Mount 3K217H54 . . . . . $ 225.99 #100-001-060AK Rem. 700 Short #100-001-066AK Sav. 110 Long ized, matte black. Includes Torx screws and wrench. Provides Extra #100-001-062AK Rem. 700 Long #100-001-020AK Sav. 10 Short RT Elevation For ® ® LIGHTWEIGHT TACTICAL SCOPE MOUNTS #100-001-144AK Mauser 98 #100-001-142AK Sav. 110 Long RT GG&G RUGER MINI-14 Long-Range Shooting; STOCK # FITS ACTION MOA LENGTH PRICE — Advise # — One-Piece Standrd Base 8K108V99.$ 126.99 Meets 1913 1 RANCH RIFLE OPTIC MOUNTS #296-000-099AK Browning A-Bolt SA 0 6 ⁄8" (15.6cm) 6B34Z95 $ 39.95 20 MOA BASES Picatinny Specs #296-000-100AK Browning A-Bolt LA 0 7" (17.8cm) 6B34Z95 $ 39.95 For Secure Installation STK # 1-PIECE STK # 2-PIECE FITS Of Scope Or Mini Red Dot Rugged, tactical bases #296-000-096AK Mossberg 500/590/835 '96 & earlier 0 5¾" (14.6cm) 6B24Z00 $ 29.99 #100-001-070AK NA Win. 70 Long provide rock-solid mount- With Plenty Of Eye Relief ing and give you 20 MOA #296-000-102AK Mossberg 500/590/835 '97 & later 0 5¾" 6B24Z00 $ 29.99 #100-001-074AK #100-001-075AK Rem. 700 Short 1 No-gunsmithing alumi- elevation adjustment for long-range shots. CNC machined from #296-000-089AK Rem. 700 SA 0 6 ⁄8" (15.6cm) 6B32Z00 $ 39.99 #100-001-076AK #100-001-077AK Rem. 700 Long steel billet for extreme strength and recoil resistance. One piece 15 num mount clamps to the #296-000-088AK Rem. 700 LA 0 6 ⁄16" 6B32Z00 $ 39.99 #100-001-078AK NA Sav. 10 Short receiver notches for the bases allow forward scope mounting. ab #296-000-095AK Rem. 760/740/742* — 0 5¼" (13.3cm) 6B24Z00 $ 29.99 factory scope rings to let SPECS: Steel, black, matte finish. Includes torx screws. One-Piece #100-001-080AK NA Sav. 110 Long 3 11 you install the latest tac- - Approximately 6 ⁄4" (17.1cm) long. Two-Piece - 1 ⁄32" (3.4cm) long, #296-000-097AK Ruger 10/22 — 0 6½" (16.5cm) 6B32Z00 $ 39.99 #100-001-145AK #100-001-146AK Sav. 10 Short RT tical optics on your Ranch sold in pairs. All One-Piece Bases include an integral recoil lug that 296-000-187AK Ruger 10/22 — 20 6¼" (15.9cm) 6B34Z29 $ 39.99 #100-001-149AK NA Mauser 98 contacts the front of the ejection port. 7 Rifle. Almost 6" long to #296-000-173AK Sako TRG — 20 5 ⁄8" (14.9cm) 6B42Z85 $ 49.99 — Advise # — One-Piece 20 MOA Base, provide plenty of versatil- STOCK # FITS STYLE PRICE #296-000-090AK Savage w/RegTrigger SA 0 6" (15.2cm) 6B32Z00 $ 39.99 8K103V99...... $ 111.99 ity to position the optic #524-000-006AK Win 70 Long Action One-Piece 4B00HDZ $ 130.00 #296-000-091AK Savage w/AccuTrigger SA 0 6½" 6B32Z00 $ 39.99 — Advise # — Two-Piece 20 MOA Base 8K95V99. . . 118.99 forward for long eye relief #524-000-007AK Rem 700 Short Action One-Piece 4B00YTP $ 114.00 7 and quick target acquisition, while you maintain a comfortable 296-000-186AK Savage Edge/Axis — 0 7 ⁄16" (18.9cm) 6B34Z29 $ 39.99 #524-000-008AK Rem 700 Long Action One-Piece 4B00AVB $ 114.00 7 cheekweld. Machined relief cuts on the underside ensure un- #296-000-175AK Savage Edge/Axis — 20 7 ⁄16" 6B33Z10 $ 39.99 FARRELL INDUSTRIES impeded cartridge ejection. Mini Red Dot model accepts mini #524-000-011AK Rem 700 Short Action Two-Piece 4B00YTP $ 87.00 7 #296-000-176AK Savage Mark II** — 0 5 ⁄8" 6B33Z10 $ 39.99 red dot holographic sights from Burris, Docter, JP, and Trijicon. #524-000-012AK Rem 700 Long Action Two-Piece 4B00AVB $ 87.00 7 #296-000-180AK Savage Mark II** — 20 5 ⁄8" 6B33Z10 $ 39.99 FG-FORCE SCOPE MOUNT Picatinny has a standard MIL-STD-1913 rail with 14 slots to 7 accept conventional Picatinny scope rings. 40 MOA REMINGTON 700 BASE - One-piece base provides #296-000-177AK Savage 93*** — 0 5 ⁄8" 6B33Z10 $ 39.99 Extra “Lug” Adds rock-solid mounting and has 7 SPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, #296-000-179AK Savage 93*** — 20 5 ⁄8" 6B33Z10 $ 39.99 Recoil Resistance matte black. Fits Ruger Mini-14 Ranch Rifle. Mounting screws, 40 MOA of elevation built-in 3 #296-000-101AK Tikka T3 — 0 7 ⁄8" (18.7cm) 6B34Z95 $ 39.95 CNC-machined base adapter plate (Red Dot model only), and instructions included. to save your scope adjustments for long-range shots. CNC ma- *Also fits Ithaca 37 and 38 shotguns (12 gauge only), S&W Model 41 pistol with 7½" spreads recoil to help keep #336-000-035AK Mini Red Dot Mount 6C43A48 . . $ 49.99 barrel, and most guns drilled to accept a Weaver #62 base. scopes, even heavy ones, on #336-000-036AK Picatinny Rail Mount 6C43A48 . . .49.99 chined from steel billet for ex- 3 5 treme strength and. ** 1 ⁄8" ejection port. *** 1 ⁄8" ejection port. the gun and precisely zeroed from shot-to-shot. Angled SPECS: Steel, black, matte finish. Includes 6-48 torx screws. Ap- HEAVY DUTY SCOPE MOUNTS 3⁄ screw wedges against the re- HAVLIN MOSSBERG .22 RIMFIRE proximately 6 4" (17.1cm) long. For long (LA) or short actions (SA). #524-000-015AK Rem 700 LA Base 4B00TPU. . . .$ 114.00 STOCK # FITS ACTION MATERIAL MOA LENGTH ceiver opening to provide another recoil lug to divert recoil away #524-000-016AK Rem 700 SA Base 4B00VBX. . . . 114.00 #296-000-149AK Rem. 700 SA Aluminum 0 6¼" (15.9cm) from the base and mounting screws. Tolerances for straightness M22 SUPER SIDE SCOPE MOUNT and flatness are held within .002". Bedding-compound inletting Update Your Vintage Rimfire With #296-000-156AK Rem. 700/722/40X SA Steel 0 6¼" on mount bottom helps you get a perfect base-to-receiver fit. Self- #296-000-150AK Rem. 700 SA Aluminum 20 6¼" centering Torx® screws help prevent slipping during use. Accepts Your Choice Of Optics MAKO SKS SEE-THRU SCOPE BASE #296-000-157AK Rem. 700/722/40X SA Steel 20 6¼" Picatinny and Weaver-style rings. Available with or without 20 Weaver-style rail conforms to re- Mount A Scope & Still Use minutes of elevation (MOA). ab #296-000-151AK Rem. 700 SA Aluminum 30 6¼" ceiver curvature and attaches to Factory Iron Sights 1 SPECS: Steel, blue finish. Length approximately equal to action existing mounting holes, centering #296-000-146AK Rem. 700 LA Aluminum 0 7 ⁄8" (18.1cm) 9 length, ⁄16" (1.4mm) high. Savage Round Top fits models with Ac- any diameter scope directly over Heavy-duty steel “see-thru” 1 1 #296-000-158AK Rem. 700/721/40X LA Steel 0 7 ⁄8" cuTrigger. Recoil lug screw is ⁄4"-28, mounting screws are 6-48. the barrel. Lets you mount full-size style scope base replaces the 1 #296-000-147AK Rem. 700 LA Aluminum 20 7 ⁄8" STOCK # STD. STOCK # MOA FITS scopes and red-dot optics. Provides rear receiver cover and lets you 1 instantly transition back to the #296-000-159AK Rem. 700/721/40X LA Steel 20 7 ⁄8" #100-001-367AK #100-001-368AK Rem. 700 Short enough clearance to keep original rear sights in place. Easy in- 1 stallation: remove bolt cover, if present, add rings and scope of factory iron sights if your primary #296-000-148AK Rem. 700 LA Aluminum 30 7 ⁄8" #100-001-365AK #100-001-366AK Rem. 700 Long choice. ab optic fails. Features two Weaver-style slots, 2½" apart for an easy #296-000-152AK Savage Rnd Back SA Aluminum 0 6¾" (17.1cm) 7 #100-001-369AK #100-001-370AK Sav. 110-116 Long SPECS: Aluminum, black anodized finish. Rail measures 4 ⁄16" fit to a variety of different-length scopes including short, com- 9 #296-000-153AK Savage Rnd Back SA Aluminum 20 6½" (16.5cm) #100-001-375AK #100-001-376AK Sav. 10-16 Short Rd Top (11.3cm) long, ⁄16" (1.4cm) high. Fits following models with side- pact tactical scopes. High-profile provides clearance and support 7 #296-000-154AK Rem. 870/100/1187 — Aluminum 0 5 ⁄8" (15cm) NA #100-001-374AK Sav. 110-116 Lng Rd Top tapped receiver: 26B, 26C, 42A, 42B, 42C, 42M (all variants), 43, for large objective scopes and night vision devices, too. Drop-in 7⁄ 44B, 44US (all variants), 46A, 46B (all variants), 46M (all variants), fit, no drilling or tapping required. #296-000-155AK Mossberg 500/590/835 1997 & later Aluminum 0 5 8" #100-001-377AK #100-001-378AK Win. 70 Long 7 and most Wards-Westernfield rifles (made by Mossberg) with side- SPECS: Steel, blued, matte finish. 4 ⁄8" (12.4cm) long. 10.4 oz. - Advise # - Aluminum HD Mount 6B59X79. . . . $ 69.99 5 —Advise #— Standard Mount 8K106Y99. . . . . $ 133.99 tapped holes measuring 1 ⁄8" (4.1cm) center-to-center. (295g) weight. - Advise # - Steel HD Mount 6B102X86 ...... 119.99 —Advise #— MOA Mount 8K109Y99 ...... 133.99 #100-001-258AK M22 Scope Mount 6A20H00. . . . $ 25.45 #100-004-606AK See-Thru Scope Base 7C18U48. . $ 24.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 250 SINCE 1939 Office/Tech: 641-623-5401 POWER CUSTOM rUGER® 10/22® PRO MAG M14/M1A SAMSON AK-47 SOUTH SHORE TGAR ET SCOPE BASE RECEIVER MOUNT TACTICAL SCOPE MOUNT REAR SIGHT RAIL Mount Target Sights Or Versatile Mount Easy-To-Install, Rock Solid; rings & bases No-Gunsmithing Optic External For Compact No Permanent Mount With Backup Adjustment Scopes & Sights Alterations To Rifle Rear "Iron" Sight Scopes Quickly attaches to fac- All-steel, bolt-on mount pro- An easy way to add a On Long Range tory drilled and tapped vides a rock solid platform for tactical optic to your Ka- Rifles 10/22 receivers. Six, cross a scope, red dot, or other holo- lashnikov, this steel mount replaces the rear sight on any AK- slots provide the versatility graphic sighting device on an pattern rifle to enable mounting of a red dot or holographic sight. Versatile, steel to mount full size scopes, plus red dot sights or compact scopes M14-type rifle. 13-slot rail accepts Picatinny or Weaver -style bases accept target front sights and external adjustment scopes MIL-STD 1913 Picatinny slots provide a rock-solid attachment 3 using Weaver-style rings. Silver anodized or hard coat, black rings. Three anchor points on receiver make sure the mount point for the optic that won’t shift during extended-fire sessions. from Lyman, Unertl and others that require a ⁄8" dovetail base. finish matches factory receiver. ab won’t shift under recoil, so there’s no loss of zero. Sight channel Easy to install - requires no permanent modification to the rifle. Contoured bottom radius provides a tight fit to barrel, prevents SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. allows use of the original iron sights without removing scope. Channel through the length of the mount has a built-in rear side movement. Does not fit Redfield external adjustment 4.75" (12cm) long. Includes screws and Allen wrench. Requires removal of stripper clip guide. No permanent modi- scopes. ba sight that works with factory front sight for iron sight backup in 5 9 #713-122-101AK Silver 10/22 Receiver Mount, fication required. Installation instructions and tools included. the event of optic damage, failure, or battery run-down. SPECS: 1018 steel, blue, matte finish. 1 ⁄16" (3.5cm) long. ⁄16" bot- 3A12H78...... $ 14.99 Minor fitting may be required. SPECS: Machined steel, black oxide finish. 3½" (8.9cm) long. 3.5 tom radius. .860" and .562" hole spacings. Includes 6-48 screws. #713-122-100AK Black 10/22 Receiver Mount, SPECS: Machined 4150 chrome-moly steel, heat treated to Rc oz. (99g) wt. Rail fits all AK-pattern rifles with a rear leaf sight. All STOCK # HEIGHT PRICE 3 3 3A13H54...... 14.99 55, phosphate coated, matte black finish. 5 ⁄8" (13.6cm) long, 1 ⁄8" mounting hardware included. 7 #841-105-175AK .175" Base 1D12V23 $ 14.95 (3.5cm) wide, 1 ⁄8" (4.7cm) high. 11.9 oz. (337g) weight. #100-006-266AK AK-47 Rear Sight Rail 1B96Y55. .$ 114.99 #687-000-035AK M14/M1A Scope Mnt 7H101T15. . $ 131.25 #841-105-225AK .225" Base 1D12V23 $ 14.95 PRECISION ARMAMENT SMITH ENTERPRISE M14/M1A #841-105-275AK .275" Base 1D12V23 $ 14.95 REMINGTON 700 S&K INSTA SCOUT MOUNTS #841-105-325AK .325" Base 1D12V23 $ 14.95 PICATINNY SCOPE MOUNT #841-105-425AK .425" Base 1D12V23 $ 14.95 PICATINNY SCOPE RAIL Fast To Install; All Steel, Solid, No Permanent Three-Point Attachment Alterations SWISS PRODUCTS SCHMIDT-RUBIN K31 Fully-machined hardened Lightweight, machined steel Picatinny mount with SCOPE MOUNT aluminum mounts deliver three-point mounting, pro- Helps Achieve Lightweight Mount With The Strength Of the increased accuracy of vides a stable, secure base Scout Rifle optical sighting without changing or altering the orig- The Accuracy These Steel & Only ¹∕³ The Weight for mounting large objec- inal configuration of your prized military rifle. All models replace tive scopes. Easily clamps to Rifles Are Famous For Picatinny rail is machined from lightweight Tennalum® 7068 the standard issue rear sight assembly, so you can mount inter- the charger guide dovetail alloy that gives the same strength as steel with only ¹∕ the Sturdy, machined aluminum ³ mediate eye relief scopes over the handguard for fast, both-eyes- and receiver mount lug without modifications to rifle. Heavy, weight. All contact surfaces are stress relieved and pre-ground mounts let you improve sight- open aiming. Requires no drilling, tapping or permanent altera- forward locking screw gives rock solid stability at the receiver before final machining to exact MIL-STD 1913 dimensions. In- ing and accuracy. Compact and tions to the rifle. Accepts Weaver-style rings and accessories. ab ring. Sight channel allows back-up use of iron sights without re- tegral recoil lug and elongated mounting screws let you posi- 3 lightweight, with a full-length SPECS: Aluminum, anodized, black, matte finish. May not fit all moving scope. Available in Standard 5 ⁄8" or Extended 7" length tion the rail so the lug will bear properly against the receiver rail that accepts 3/8" scope rings. Clamp-On mount positions the variants of models listed. Includes instructions. for added sight mounting options. Tactical model features a to prevent the rail from moving even under aggressive recoil. scope along the right side of the receiver. Does not interfere with #794-000-008AK Schmidt Rubin K31 Mount, Picatinny rail but without the open sight channel. Absolutely Built in 20 MOA of elevation for extended long-range shooting. bolt operation and requires no modifications to rifle. Permanent 4G48Z30...... $ 69.00 can’t give under the tightest clamping torque. All model accept All surfaces are fully chamfered, with extra clearance over the Mount positions scope to the left side of the receiver. Requires #794-000-009AK Mauser 98 K Mount 4G48Z78 . . . .69.99 Weaver-style rings. ba ejection port. ab #794-000-010AK Yugo 48 4G48Z30...... 69.00 drilling and tapping for three, 10-32 screws. ab ® SPECS: 4140 steel, nitride finish, black. Hardened to Rc 60-62. SPECS: Tennalum 7068 alloy, hardcoat anodized, matte black fin- 3 SPECS: Aluminum, anodized, black or steel, blued finish. Clamp- Standard - 5 ⁄8" (13.6cm) long. 1.875" (4.7cm) high. 10.9 oz (310 g) 3 1 ish. Instructions and 6-48 mounting screws included. Short Action On - 5 ⁄8" (13.7cm) long, 1" (2.5cm) high. Permanent Mount - 3 ⁄2" 5 wt. Extended - 7" (17.7cm) long, 1.85" (4.7cm) tall. 15.3 oz. (435g) ⁄8 (SA) – 6½" (16.5 cm) long, .380" (9.4 mm) high at front ring, 2.3 oz. SADLAK INDUSTRIES M14/M1A 3 (8.9cm) long, " (15.8mm) high. wt. Tactical - 5 ⁄8" long, 1.875" high. 13.3 oz. (378g) wt. (.65g) wt. Long Action (LA) – 7" (17.7 cm) long, .380" (9.4 mm) high #100-002-998AK Steel K31 Clamp-On Mount, #851-000-001AK Std. M14/M1A Picatinny Mount, at front ring, 2.5 (70g) wt. TACTICAL SCOPE MOUNT 7K99V99...... $ 119.99 1E300A00...... $ 322.46 #100-011-239AK Rem 700 Picatinny Scope Rail, SA, #100-000-725AK Aluminum K31 Clamp-On Mount, Maximum #851-000-061AK Ext. M14/M1A Picatinny Mount, 2D96P00...... $ 119.99 7K68H00...... 73.99 Support, Superior 1E402A67...... 503.35 #100-011-240AK Rem 700 Picatinny Scope Rail, LA, #100-000-726AK Aluminum K31 Permanent Mount, Strength-To-Weight #851-000-033AK Tactical M14/M1A Picatinny Mount, 2D96P00...... 119.99 7K45H00...... 49.99 Ratio 1E525A99...... 575.95 Standard Helps keep the weight TACTICAL SOLUTIONS rUGER® 10/22® PRECISION REFLEX rEMINGTON 7615 down when adding heavy tactical optics to your PICATINNY SCOPE MOUNT PICATINNY RAIL SCOPE BASE M14/M1A. Three-point Standard & Mounts Tactical design clamps down sol- idly, without alteration, SAVE MONEY - 15 MOA Models Sights & Airborne to the side receiver ring, Precision CNC ma- Optics For Maximum charger guide dovetail CHECK FOR A REBATE !! Accuracy chined from lightweight, and receiver mount lug. Precision-cut rail includes 5º angle Visit www.brownells.com/rebates 6061 T6 aluminum with Precision machined, milled on the underside for easy case ejection without hang-ups; to find out about the great deals MIL-STD 1913 Pica- MIL-STD 1913 Pica- accepts Picatinny and Weaver-style rings. Open sight channel tinny rail pattern allows tinny rail allows gives unobstructed view of back-up iron sights. Standard model our manufacturers are offering mounting a variety of mounting optics and tactical sights for maximum accuracy. Low is available in three strength-to-weight combinations. Steel sights. Easily accommodates different-length scope bodies and profile design features fourteen cross-slots for easy ring spacing model is fully machined from stress-relieved 4142 chrome-moly provides generous adjustment for eye relief. Drilled to fit the adjustments to accommodate different-length scope tubes. Four, steel barstock, hardened to Rc 28-32 for maximum strength. factory hole spacing and includes mounting screws. Accepts both steel, 8-40 Allen head screws secure rail to receiver for exception- Aluminum model is machined from 7075 bar stock aluminum Picatinny and Weaver-style rings. Hardcoat anodized for dura- al holding power. Precision machined from 6061-T6 aluminum, and hardcoat anodized matte black for durability. Airborne bility. Available with 0 MOA base, or 15 MOA base to help main- then hardcoat anodized for added strength. Easy installation us- model features a lightweight skeletonized frame with seven, mil-spec manganese phosphate Parkerized, matte black. 11.8 oz. tain your scope’s full elevation adjustment range when shooting 3/8 ing factory pre-drilled scope base holes, requires no alterations " diameter CNC machined lightening holes in the top of the (334g) wt. Titanium - Titanium, black, nitride finish. Base hardness at long range. ba to rifle. Accepts both Picatinny and Weaver-style rings. rail for reduced weight without sacrificing strength. Machined Rc 34, surface hardness Rc 85. 7.3 oz. (207g) wt. Aluminum - 7075 SPECS: 6061 T6 aluminum, hardcoat anodized, black, matte finish. from chrome-moly steel bar stock and heat-treated to Rc 50 for 5 13 11 SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 6" aircraft aluminum bar stock, hard coat anodized, black, matte finish. 4 ⁄8" (11.7cm) long, ⁄16" (2.1cm) wide, ⁄32" (8.7mm) high from top (15cm) long. 1.4 oz. (40g) weight. Includes steel mounting screws. superior strength. Mil-Spec Parkerized finish resists abrasion 4.3 oz. (123g) wt. Airborne - Steel, chrome-moly, Parkerized, black, of receiver. and corrosion. Adopted by the 101st Airborne. ab Fits all Remington 7615 pump action rifles with factory drilled and 7 matte finish. 9.4oz. (266g) wt. #100-003-819AK 0 MOA Scope Mount, tapped receivers. SPECS: 5 ⁄16" (13.8cm) long, 2" (5.1cm) wide, 1¾" (4.4cm) high. #100-005-434AK Steel Scope Mount 6A218V57 . . $ 254.99 8K31H51...... $ 36.99 #714-000-009AK Rem 7615 Pictanny Base, Includes mounting hardware, Allen wrenches, and complete in- #100-002-407AK Aluminum Mount 6A118P45 . . . .145.99 #100-003-820AK 15 MOA Scope Mount, 4A50V68...... $ 62.99 structions. Steel - 4142 chrome-moly steel, hardened to Rc 28-32, #100-003-841AK Airborne Mount 6A249H99 . . . . 289.99 8K29H39...... 33.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 251 ULTIMAK AK-47 SCOPE MOUNT VOLQUARTSEN RUGER® 10/22® VOLQUARTSEN XS SIGHT SYSTEMS MARLIN LEVER ACTION Low Mount Lets BARREL & RECEIVER SCOPE BASE 10/22® EXTENDED LEVER RAIL You Use Optics Or Cantilever Or Receiver Provides Flexible Iron Sights PICATINNY SCOPE MOUNT Mount Design Gives Mounting Of Optics & Sights Lightweight, aluminum mount replaces Maximum Versatility Stability & Accuracy Gain increased sighting options for the gas tube to maintain scope alignment and For Mounting Bigger your Marlin centerfire lever rifle by prevent shifting zero. Weaver-style base sets below the line of Two, highly functional Optics installing this lightweight, aluminum sight, no need to remove mount to use iron sights. Issue sights designs for the Ruger CNC machined, alumi- scope rail. Accepts Picatinny or Weaver-style rings, plus is can be viewed directly through the red dot and reflex scopes. ab 10/22. Barrel Mount - At- 7 taches to the barrel; cantilevers rearward, over the top of the num alloy mount installs specially milled on back end to accept the XS Sight Systems SPECS: 6061-T6 Aluminum, black, matte finish. 6 ⁄8" (17.5cm) long. easily on 10/22 receivers, is Lever Rail Ghost Ring Sight for Marlin 1894, 1895 and Marlin 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles. Installation may receiver. Scope stays aligned with the bore, diminishes the effect made to Picatinny specifications and gives you a rugged, stable 336/308MX (found elsewhere in catalog). Extra-long rail gives require minor inletting to handguard. of tolerance stacking between the receiver and slip-in barrel.

rings & bases platform for your optics. .480" tall, versatile, extended length of plenty of versatility in mounting scope directly over the receiver #100-000-497AK AK-47 Scope Mount 5K88T47 . . . $ 94.99 Installation requires drilling and tapping of barrel. Receiver Mount - For tightly fitted or threaded barrels. Raised design 7" allows plenty of mounting space for your choice of accessories, or forward over the barrel for intermediate eye relief optics or provides the proper height and eye relief for stocks equipped especially scopes with large objective lenses. Extends 2" forward red dot sights. Requires removal of factory rear sight. Gunsmith ULTIMAK M14/M1A/M1 GARAND with Monte Carlo combs or raised cheekpieces. Same hole pat- of the receiver with 17 cross slots to choose from. Four mounting installation recommended. ba tern as factory mount. ab screws included. Available in black, or silver. No gunsmithing SPECS: Aluminum, matte finish, black. 11" (27cm) long, .830" FORWARD OPTIC MOUNT SPECS: Aluminum, anodized, matte black (MB) or matte silver required. ab (21mm) wide. 3 oz.(85g) weight. Includes mounting hardware. 1 (MS) finish. Barrel Mount - 8" (20cm) long, 2 ⁄2" oz. (70g) wt. Re- SPECS: CNC machined aluminum, black and silver. 7" (17.8cm) long, #006-000-170AK Marlin 1894 Lever Rail 6K45P00. $ 54.00 For Easy Forward 3 7 ceiver Mount - 4 ⁄4" (12cm) long, 2 oz. (56 g) wt. Accepts Weaver- ⁄8" (2.2cm) wide, .480" (1.2cm) tall. #006-000-151AK Marlin 1895 Guide Gun Lever Rail, Mounting Of Optics style rings. #930-000-044AK Extended Mount, Silver, 6K45T00...... 54.00 One-piece aluminum #930-122-300AK MS 10/22 Barrel Mount 3Z27A25 . $ 34.99 3Z45U00...... $ 56.30 #006-000-165AK Marlin 336/308MX Lever Rail, Picatinny rail mount #930-122-302AK MB 10/22 Barrel Mount 3Z27A25. . 34.99 #930-000-045AK Extended Mount, Black 3Z45U00. . 56.30 6K45T00...... 54.00 replaces the handguard - no gunsmithing! - to give your rifle a #930-000-035AK MB 10/22 Receiver Mnt 3Z25U00. . 31.30 MARLIN 1894/1895/336/308MX LEVER RAIL SIGHT SYSTEM - mounting platform for an intermediate eye relief scope, red dot, WEAVEr rEMINGTON 700 Lightweight scope rail with holographic or reflex sight. Low profile enables co-witnessing WEIGAND COMBAT rUGER® RIFLE backup iron sights mounts of the factory sights with red dot sights. Recoil lug, plus dual TACTICAL MULTI-SLOT SCOPE BASE to Marlin lever rifles without clamps attach quickly to any standard weight barrel without ONE PIECE SCOPE MOUNT drilling and trapping. Fea- modifications. Mount remains in place during field stripping. ba Increases Mounting Lots Of Slots For Flexible Ring tures a large light-gathering SPECS: Aluminum, hardcoat anodized, matte black. Mounting Options For Hunting Or rear ghost ring and high- 9 Spacing; Drop-On Installation hardware and instructions included. M14/M1A - 12 ⁄16" (31.9cm) Tactical Rifles visibility front post sight for long. 12.4 oz. (352 g) wt. Fits M14/M1A family of rifles. M1 Ga- Provides flexibility when mount- fast sight acquisition during day or low-light conditions. Rear 3 One-piece, precision ma- rand - 9 ⁄8" (23cm) long. 6.5 oz.(184g) wt. ing shorter scopes or electronic chined Weaver rail lets you ghost ring is fully adjustable for windage and elevation, and #100-002-948AK M14/M1A Forward Optic Mount, sights. Requires no modifications to gun; quickly attaches to mount scopes, red-dot sights, ghost-ring sights, and other optics includes interchangeable .191" and .230" diameter apertures 5K179H99...... $ 199.99 Mini-14® Ranch Rifle, Mini Thirty®, PC9, PC40, and 10/22® using Weaver-style rings. Plenty of cross-slots allow optimal ring for fine-tuning accuracy. One-piece front sight has easy-to-use #100-007-347AK M1 Garand Forward Optic Mount, Magnum. Positions the scope low over the receiver for improved spacing for a wide range of scopes including compact, full-size, .100" wide, white-line post. Rail accepts Picatinny or Weaver- 5K171Y79...... 185.00 balance and better eye alignment. Lightweight aluminum keeps and extra-long scope tubes. Low-profile, open center design al- style rings. Extra-long rail gives plenty of versatility in mount- weight to a minimum. Available in Weaver-style or Picatinny; lows use of front sight when optics are removed. Lightweight ing scope directly over the receiver or forward over the barrel for ULTIMAK MINI-14®/MINI THIRTY® Weaver-style accepts all Weaver-style rings, plus Pro-Point and aluminum reduces weight without compromising strength. intermediate eye relief optics or red dot sights. Requires removal scopes with built-in Weaver-style ring clamps. ab Hardcoat anodized for additional strength and wear resistance. of factory rear sight. Gunsmith installation recommended. SCOUT SCOPE MOUNT SPECS: Aluminum, black or silver, anodized finish; Picatinny only Attaches to factory drilled and tapped receivers using the in- SPECS: Lever Rail - Aluminum, matte black. 11" (27cm) long, .830" available in black. 5" (12.7cm) long. 2.6 oz. (74 g) weight. cluded steel mounting screws. ab (21mm) wide. 3 oz. (85g) weight. Includes mounting hardware. #957-000-032AK Weaver Rifle Mount, Blk 7E39C96. $ 49.95 SPECS: Aluminum, anodized finish, matte black. Steel mounting Sights - Steel, black, matte finish. Ghost Ring Apertures - .191" 7 #957-095-014AK Weaver Rifle Mount, Silver, screws. Short Action (SA) - 5 ⁄8" (14.9cm) long. Long Action (LA) - (4.8mm) and .230" (5.8mm) I.D. Front Post - .100" (2.5mm) wide 7E39Z96...... 49.95 6¼" (15.8cm) long. Fits Rem 700, 78, 40X-L, 721, and 725. Accepts white line. 1895 fits Marlin 1895 with .700" (17.8mm) and 1" (2.5cm) Use Iron & Optic Sights Without Reconfiguration #957-000-053AK Picatinny Rifle Mount, Black, Weaver-style rings. c-to-c front ramp screws. 336 fits round barrel Model 336 rifles only. 7E40U23...... 49.99 #955-000-137AK Rem. 700 SA Base 5E18A93. . . . $ 21.99 #006-000-167AK Marlin 1894 Lever Rail Sight System, 6K107P14...... $ 135.00 Low profile mount clamps directly to the barrel for added sta- ® #955-000-136AK Rem. 700 LA Base 5E18A93. . . . .21.99 bility. Positioned below the line of sight - no need to use a raised 10/22 SCOPE MOUNT - Fast, simple, #006-000-166AK Marlin 1895 Lever Rail Sight System, cheekpiece for proper hold. MIL STD 1913 Picatinny rail. No installation for any factory drilled Ruger 6K108P05...... 135.99 gunsmithing, drop-in installation. ab 10/22. Lightweight, aluminum scope base XS SIGHT SYSTEMS #006-000-168AK Marlin 336 Lever Rail Sight System, SPECS: 7075-T6 aluminum, Mil-Spec hardcoat anodized, matte matches the factory hole pattern and accepts Weaver-style rings. 6K107P14...... 135.00 Black anodized finish complements the factory finish. SCOUT SCOPE MOUNT black finish. Includes mounting screws and illustrated instructions. 3 7 #006-000-169AK Marlin 308MX Lever Rail Sight System, 3 SPECS: Aluminum, black anodized. 4 ⁄4" (12cm) long, ⁄8" (22mm) Mini-14 - 10 ⁄8" (26.4cm) long. Fits Standard and Ranch rifles. Fits Allows Fast Sighting 6K119P29...... 150.99 rifles with pre-580 serial number prefix. Mini Thirty - Fits all Mini wide, .8 oz. (24g) wt. Screws included. Thirty rifles manufactured before 2008 with factory original barrel. #957-106-010AK 10/22 Base, Black 7E15D96. . . . $ 19.95 Puts a long eye relief scope #100-000-960AK Mini-14 Scout Mount 5K132X52. $ 145.99 10/22 & 77/22® PICATINNY SCOPE MOUNT - Machined alumi- just ahead of the receiver. XS SIGHT SYSTEMS LEVER ACTION Attaches with two screws #100-002-790AK Mini Thirty Scout Mnt 5K132D52 . 145.99 num mount installs easily on your rifle’s ™ receiver. Made to Picatinny specifications and accepts Weaver-style rings. Models 097 and 099 fit large LEVER SCOUT MOUNT ring Mauser 98 military barrels and require Acraglas® for instal- to give you a rugged, stable platform for Mounts Scope Over Barrel ULTIMAK M1 CARBINE lation (included). 106 fits commercial bolt action, tapered sporter your optics. Eleven cross slots ensure optimum scope placement For Fast Sighting for perfect eye relief. Screw holes line up precisely with factory barrels. No. 1 Mk III fits SMLE models No. 1 Mk III, 2A, 2A1, No. M6-B FORWARD OPTIC MOUNT receiver scope base hole pattern for quick, simple installation. 7. No. 4 Mk I fits SMLE Models No. 4 Mk I, No. 4 Mk 1/2, No. 4 Lightweight, Weaver-style ab Cantilever Design Mounts Accepts Picatinny or Weaver-style rings. Mk 2, No. 5 Mk I. mount positions an extended eye re- 3 SPECS: 6063 T6 Aluminum, black, anodized finish. 6" (15.2cm) lief scope forward of the receiver for quick, Scopes & Optics To Your SPECS: Aluminum, black, matte, anodized finish. 10/22 - 4 ⁄4" 1 1 long, 3.2 oz. (90 g) weight. Includes instructions. Measure barrel both-eyes-open sighting. Weaver-style base fea- .30 Carbine (12.07cm) long, ⁄2" (12.7mm) tall from top of receiver. 77/22 - 5 ⁄8" just forward of receiver: for .960" order 097 mount and for .980" tures multiple cross slots for attaching a wide range of electronic (13cm) long, ½" tall from top of receiver. Screws included. 1 Get the full accuracy potential #957-000-067AK 10/22 Pic Scope Base 7E15U96. . $ 19.95 barrel order 099 mount (both come with ⁄2 oz. Acraglas). For bolt and optical sights. Mounts to existing holes and rear sight dove- from your M1 Carbine by replacing its action sporter barrels, order 106 mount; requires turning barrel to tail. Sets low to allow use of iron sights without removing mount. #957-000-077AK 77/22 Pic Scope Base 7E49X99 . . . 59.99 3 handguard with a Picatinny rail mount for ex- 1.05" dia. for a minimum length of 1 ⁄4" forward of the receiver. No. Requires no modifications to rifle. Marlin models available for tended eye relief scopes, red dot, reflex, and laser sights, or tacti- 77/22® & 77/44® SCOPE MOUNT - Clamps to fac- 1 Mk III and No. 4 Mk I require removing front and rear sights and 1895 Guide Gun, 1894 and 336 rifles. Winchester fits Model 94’s cal accessories. Dual, high-strength, steel clamps secure mount tory ring cuts; keeps mounting height low and inletting of forearm. with rear sight dovetail 4" forward of receiver. ab to barrel, forward of the gas block. No need to remove standard over the receiver. Lots of slots for Weaver- #006-109-097AK 097 Military Mount 6K50B90. . . $ 68.99 SPECS: Aluminum, black, matte finish. 8" (20.3cm) long. Includes issue iron sights and will not interfere with case ejection. ab style rings. 77/22 fits .22 LR and .22 Mag- #006-109-099AK 099 Military Mount 6K53D71. . . . 72.99 instructions, plastic punch, hex wrench and Loctite®. Winchester SPECS: 6061-T6 aluminum, hard anodized, with 4140 steel clamps, num. 77/44 also fits 77/22 Hornet. #006-109-106AK 106 Sporter Mount 6K53T71. . . . 72.99 also includes bedding compound. 1 matte black. 8 ⁄6" (20.5cm) long. Fits standard, G.I. pattern, M1 SPECS: Aluminum, black or silver, matte finish. 5" (12.7cm) long. #006-000-027AK No. 1 Mk III Scout Mount, #006-000-020AK Marlin 1895 Scout Mnt 6K34B00 . $ 50.00 carbines without alteration. May require minor stock inletting on #957-000-046AK 77/22 Scope Mount, Black 7E39C99.$ 49.99 6K51B52...... 68.70 #006-000-031AK Marlin 1894 Scout Mount 6K34T00. 50.00 synthetic and I.A.I. stocks. Will not fit Universal brand carbines. #957-000-047AK 77/22 Scope Mount, Silver 7E39C99. 49.99 #006-000-028AK No. 4 Mk I Scout Mount, #006-000-032AK Marlin 336 Scout Mount 6K34T00. .50.00 #100-001-780AK M6-B Optic Mount 5K82B09 . . . . $ 99.99 #957-000-056AK 77/44 Scope Mount, Black 7E39U99 . 49.99 6K51B52...... 68.70 #006-000-035AK Win. 94 Scout Mount 6K36T67 . . . 55.00 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 252 SINCE 1939 Office/Tech: 641-623-5401 Brownells RIMFIRE/AIRGUN BADGER ORDNANCE 34mm TACTICAL BURRIS SIGNATURE RINGS BURRIS DELUXE .22 TIP-OFF RINGS RINGS POS-ALIGN Pivoting Synthetic All Steel For Full Size Deluxe DOVETAIL SCOPE MOUNT Inserts End Scope Misalignment Rimfire & Airgun Scopes Easy Installation & Removal; rings & bases Integral Offset Rings Heavy Duty To Stand Up Unique system puts an end to Gracefully contoured, precision-ma- For Rock-Solid Mounting To Powerful Recoil dinged, damaged, and misaligned chined, premium steel rings mount 1" One-piece mount with integral scope tubes, plus holds scopes firmly scopes on airguns or .22 caliber rimfires Precision-machined, tactical ring against recoil. Steel outer rings with with grooved ­receivers. Blued finish. rings is precision machined for solid 3 Pos-Align mounting on receivers with nominal sets provide strong, rigid mounting to securely hold large diam- self-centering, synthetic inner rings, adjust to slight mounting Fits nominal ⁄8" dovetail. 3 eter, 34mm scope tubes, like Schmidt & Bender, on hard-recoil- variations so any 1" or 30mm scope is perfectly aligned. On ⁄8" dovetails. Clamps tight with two, high-strength steel cross- ing guns. Robust, hex clamping nuts and Weaver-style clamps bases without windage adjustment you get maximum usage of DELUXE RINGS - Graceful style and superior strength. Highly bolts for zero movement. Ring height and forward offset are ideal polished blued finish. for use with long-body scopes. Two steel Allen head screws secure lock rings tightly on Weaver and Picatinny mounts. Ring cap is the scopes’ internal windage/elevation adjustment, closer lens secured with Torx screws. Each set is serial-numbered to guar- alignment, and clear, sharp images. ab SPECS: Height measured from top of base to bottom of scope each top ring strap to the lower ring and hold the scope in stress- tube. Medium - .310" (7.9mm) high. High - .455" (11.6mm) high. free alignment for consistent accuracy. Machined from 6061 alu- antee a precision-matched pair. Available in 1", 1.125 and 1.275" SPECS: Rings - Steel, 1" (2.5cm) and 30mm I.D. Available in pol- ring heights, steel or aluminum depending on model. ab ished blue (PB), matte blue (MB), or satin nickel (SIL) silver. Rings #118-420-072AK Med. .22 Rings 8A29H00. . . . . $ 42.00 minum billet, then deep hardcoat anodized for added strength #118-420-073AK High .22 Rings 8A29H00...... 42.00 and wear resistance. Accepts 1" diameter scope tubes. SPECS: 1" & 1.125" – Steel, matte black oxide finish. 1.275" - sold in pairs and include­ 1 pair concentric inner rings (inserts). Pos- SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 4" MAX-Alloy aluminum, black, matte, anodized finish. Ring heights Align Standard (STD) Rings fit Burris/Leupold/Millett rotary dovetail SIGNATURE POS-ALIGN RIMFIRE/AIRGUN RINGS - 1" rings (10.2cm) long, 1" (2.5cm) I.D. Ring height - .45" (11.4mm) mea- measured from top of base to inside center of rings. Available in 1" systems. Pos-Align Zee Rings (ZEE) fit Weaver-style bases. Height with self-aligning, synthetic inserts that prevent scope damage 3 (25.4mm), 1.25" (2.9cm) and 1.275" (31.9cm) ring heights. shown is from top of base to bottom of ring. 1" Standard Rings: sured from top of dovetail to inside bottom of ring. Fits ⁄8" (9.5mm) from misaligned rings. grooved receivers. Accepts scope with 1" O.D. tube. #093-000-028AK 34mm Rings, 1" 3K166Z67. . . . $ 199.95 Med - .270" (6.8mm); High - .390" (9.9mm). 1" Zee Rings: Med. - SPECS: Steel, polished (PB) or matte blue (MB). High .793" 3 #080-000-673AK Dovetail Scope Mount 8K54Z49. . $ 59.99 #093-000-035AK 34mm Rings, 1.125" 3K166Z67. . . 199.95 .270" (6.9mm); High - .420" (10.7mm). 30mm Standard Rings - Med. (20.1mm). Fits both nominal ⁄8", .22 and 11mm airgun dovetails. #093-000-017AK 34mm Rings, 1.275" 3K179Z99. . . 199.99 - .180" (4.6mm); High - .300" (7.6mm); Extra High - .420" (10.7mm). #118-420-555AK PB RF/Airgun Rings 8A45V39. . . $ 53.99 Inserts - Synthetic material, black. 30mm Zee Rings - Med. - .200" #118-420-556AK MB RF/Airgun Rings 8A45V39. . . 53.99 B-SQUARE SPORT UTILITY RINGS (5.1mm); High - .325" (8.3mm); Extra High - .580" (14.7mm) BADGER ORDNANCE Economical Rings For Mounting Scopes MAXIMIZED STOCK # FINISH MODEL HEIGHT PRICE BURRIS WEAVER-STYLE “ZEE” RINGS #118-420-400AK PB 1" STD Med. 8A34V00 $ 35.99 Strong, lightweight aluminum rings secure scope SCOPE RINGS Made Of Steel #118-420-401AK MB 1" STD Med. 8A35V99 $ 37.99 to any Weaver-style or similar dovetail base. Extra Extra Strong Precision machined STEEL, streamlined rings length maximizes contact surface between scope #118-420-578AK MB 30mm STD Med. 8A55V00 $ 61.99 to fit Weaver style bases. Gives that “custom” look. and rings for exceptional gripping force to prevent To Withstand Heavy Recoil #118-420-410AK PB 1" STD High 8A34V00 $ 35.99 Elegant, rounded contours. scope movement under recoil. Four, steel, hex-head screws se- Heavy duty 30mm steel rings, #118-420-411AK MB 1" STD High 8A34V00 $ 36.99 SPECS: Steel; polished blued (Pol. Blue), matte cure the ring halves, while a cross-bolt locks the clamping block machined in pairs, serial numbered, #118-420-581AK MB 30mm STD High 8A55V00 $ 61.99 blued (Safari) or satin, nickel-plated (Silver). 3 oz. securely to the base. Hex wrench included. Models available for Ultra-High Max-50 and designed specifically to securely (85 g) pair.Height shown is from top of base to inside bottom of ring. 1" and 30mm scope bodies. Sold in pairs. hold large, heavy scopes on hard-re- #118-420-582AK MB 30mm STD Ex High 8A55V00 $ 61.99 1 1" (2.5cm) dia.: Low - .135" (3.4mm), Med. - .245" (6.2mm), High - SPECS: Aluminum, anodized, matte black. Fits Weaver-style bases. ⁄2 #118-420-420AK PB 1" ZEE Med. 8A36V15 $ 39.99 coiling guns. Weaver-style clamp with big " nut really snugs 450" (11.4mm), 30mm (1.1") dia.: High - .460" (11.6mm). Height measured from top of base to inside bottom of ring. 1" ring to the mount. Ultra-High provides optimum height for AR- #118-420-421AK MB 1" ZEE Med. 8A36V49 $ 39.99 Low - .165" (4.2mm). 1" Medium - .335" (8.5mm). 1" High - .695" STOCK # HEIGHT SIZE FINISH PRICE 15, AR-10 and SR-25 rifles. MAX-50 is 1" (2.5cm) wide with six #118-420-422AK SIL 1" ZEE Med. 8A43V00 $ 45.99 (17.7mm). 30mm Low – .175" (4.5mm). 30mm Medium – .330" clamping screws. Gives 60% more holding power to keep scopes #118-420-079AK Low 1" Silver 8A31H00 $ 44.00 #118-420-430AK PB 1" ZEE High 8A39V99 $ 45.99 (8.4mm). 30mm High – .585" (14.9mm). on .50 BMG rifles. Ring reducers convert 30mm to 1". ab #118-420-080AK Low 1" Pol. Blue 8A25H00 $ 35.00 #100-003-586AK Low 1" Rings 6K08H99 ...... $ 11.99 #118-420-431AK MB 1" ZEE High 8A39V99 $ 45.99 SPECS: Steel, black,matte finish. Ring height measured from top #118-420-083AK Low 1" Safari 8A25H00 $ 35.00 #100-003-587AK Medium 1" Rings 6K08H99. . . . . 11.99 of mount to center of ring; Standard - .823" (2cm), Medium - .885" #118-420-432AK SIL 1" ZEE High 8A43V00 $ 45.99 #100-003-588AK High 1" Rings 6K08H16...... 10.99 (22.5mm), Medium High - 1.0" (2.5cm), High - 1.125" (2.8cm), Ultra #118-420-085AK Med. 1" Silver 8A31H00 $ 44.00 #118-000-018AK MB 30mm ZEE Med. 8A58H00 $ 61.99 #100-003-481AK Low 30mm Rings 6K08Y16. . . . . 10.99 High - 1.378" (3.5cm). Max-50 - .823" (2cm), Max-50 High - 1.125". #118-420-081AK Med. 1" Pol. Blue 8A25H00 $ 35.00 29 #118-000-017AK MB 30mm ZEE High 8A52H00 $ 69.99 #100-003-553AK Medium 30mm Rings 6K09H99. . . 12.99 Max-50 Ultra-High - 1 ⁄64" (3.7cm). Weights; Standard - 6.6 oz #118-420-084AK Med. 1" Safari 8A25H00 $ 35.00 #100-003-482AK High 30mm Rings 6K09Y99. . . . .12.99 #118-000-004AK MB 30mm ZEE Ex High 8A57H00 $ 61.99 (187 g), High - 9 oz. (255 g), Ultra High - 10 oz. (284 g), Max-50 - #118-420-082AK High 1" Pol. Blue 8A25H00 $ 35.00 10.4 oz, (294 g). SIGNATURE OFFSET RING INSERTS - Pos- #118-420-077AK High 30mm Safari ® ® #093-306-080AK Standard Ring 3K145A49. . . . $ 159.99 8A42H00 $ 60.00 Align®, synthetic inserts optically center B-SQUARE RUGER MINI-14 #093-306-001AK Medium Scope Ring, the internal lenses of your scope for optimal *See Burris Pos-Align ZEE rings (with the inserts) under Signature Rings. 3K149C99...... 169.99 brightness and clarity. Offset design helps SCOPE MOUNT #093-306-002AK Medium High Scope Ring, correct for slightly misaligned rings caused by off-center re- 3K149C99...... 174.99 DAI MANAGEMENT ENFIELD No. 4 & 5 Multi-Slotted For Perfect Ring Spacing ceiver holes, bases, or rings. Relieves stress on the scope tube #093-306-090AK High Ring 3K155A00...... 165.00 and allows maximum usage of your scope’s internal windage/ For Series 181 and newer with remov- #093-306-100AK Ultra High Ring 3K156A49. . . . .169.99 SCOPE MOUNT elevation adjustments. Delivers excellent scope-to-ring contact able bolt stop covers. Attaches to side of #093-306-110AK Max-50 Ring 3K162A61...... 179.99 Quick Detachable, without lapping; plus, prevents dings and marks on the scope receiver; replaces the bolt stop cover #093-000-001AK Max-50 High Ring 3K165Z00. . . .175.00 tube. Available in pairs or kits. Basic Kit includes one pair each Positive Return To Zero plate. Locks in place with two brass- #093-000-013AK Pair Ultra-High Rings, of +/- .005", +/- .010" and +/- .020" inserts; Gunsmith Kit includes tipped setscrews. Comes with 1" Weav- 3K160Z10...... 179.99 No gunsmithing required to put a 10 pairs of each. er-style scope rings; Black model also available without rings. #093-306-120AK 1" Standard Reducers 3K29A35 . . .36.95 scope on that old Enfield No. 4 or 5. SPECS: Synthetic, black. For 1" rings only. SPECS: Aluminum, anodized black or silver. Screws and recoil #093-000-002AK 1" Max-50 Reducers 3K41Z34. . . . 45.00 Quick detachable, Weaver-style base is machined to extremely keys are steel. #118-626-019AK Basic Offset Insert Kit 8A13Y00. . $ 16.99 close tolerances for precise return to zero. Attaches solidly to #122-450-014AK Mini-14 Mnt, Blk w/Rings 6K72H10.$ 72.99 #118-626-024AK G’smith Offset Insert Kit 8A77Y00. .89.99 the receiver using the ejector and safety screws. Installation #122-450-114AK Mini-14 Mount, Silver w/Rings, BURRIS #118-626-017AK +/-.010" Offset Inserts, 1 pair, requires no bolt modification or rear sight removal. Leveling 6K89Y99...... 103.99 DOUBLE 8A07Y00...... 9.99 adjustments adapt mount to a wide range of receivers; wind- #122-445-020AK Mini-14 Mnt, Blk w/o Rings 6K49H99. 63.99 DOVETAIL 1" RINGS #118-626-018AK +/-.020" Offset Inserts, 1 pair, age adjustments help keep your scope reticle in the center of its 8A07Y00...... 9.99 range. Does not impair access to safety. Solid Mounting With A Clean Look SPECS: Aluminum, matte black. Savage-built rifles and others us- B-SQUARE MAUSER 98 CLASSIC Two-piece mounting system uses BURRIS ing a flat ejector spring require block-style spring. 3.9" (10cm) long. QUICK DETACH ZEE RINGS #100-000-319AK Enfield Scope Mount 4K60C81. . $ 75.99 MILITARY MOUNT Signature Pos-Align rings to prevent any possible scope damage from mis- Quickly Removable, Super Stable No Gunsmithing To Mount aligned bases. Double dovetail rings must be used with double Nothing is more frustrating than breaking a scope. Available in Low, Medium, and High. Long Eye Relief Scout Scopes dovetail bases (available separately). scope on the hunt with no way to remove it from SPECS: Steel, blued, matte finish. Accepts 1" O.D. scope tubes. SPECS: Hardened steel. Matte black. Height from top of base to Enjoy accurate shooting without the rifle. Weaver-style, 1" quick detach rings give bottom of ring. Low .2" (5.1mm). Medium .32" (8.1mm). High .48" Heights measured from top of base to inside bottom of ring: Med. you a rock solid mounting system for optics that can reducing the collector value of classic - .270" (6.8mm); High - .390" (9.9mm). (12.2mm). Sold per set. military rifles. Gives improved sighting without permanent modi- be removed from the base quickly and easily with #118-000-005AK Quick Detach Zee Ring, Low, fications to the rifle. Weaver-style base includes 1" rings, replaces DOUBLE DOVETAIL RING PAIRS QD levers. Instead of walking back to camp empty 8A48H36...... $ 68.99 handed, you can simply remove the scope and use the iron sights. rear sight; use with long eye relief handgun or Scout scopes. STOCK # FITS/FINISH PRICE #118-000-006AK Quick Detach Zee Ring, Med, 1 Immediate return to zero means that you won’t spend precious SPECS: Aluminum, black, matte finish. 4 ⁄2" (11.4cm) lg. Includes #118-420-561AK 1" Med./Matte 8A34V00 $ 49.00 8A47H00...... 67.00 1" rings, instructions. daylight sighting back in if you’ve taken the scope off for dense #118-000-007AK Quick Detach Zee Ring, High, #122-185-610AK M98 Classic Mil. Mount 6K26H50. . 33.99 #118-420-571AK 1" High/Matte 8A34V00 $ 49.00 woods hunting. Two, Torx head screws fasten rings securely to 8A47H00...... 67.00 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 253 Brownells PICATINNY EGW TACTICAL LEUPOLD LEUPOLD SCOPE RINGS SCOPE RINGS ONE-PIECE BASE “STD” RINGS Machined As A Matched, Carefully machined from cold- Classic steel, holds scope tight- Robust, Versatile, Affordable Rings Serial-Numbered Pair rolled, steel bar stock, featuring ly. Fits Leupold STD, one- and For Tactical & Sporting Rifles For Precise Alignment generous windage adjustments two-piece bases, plus bases from These rings are precision ma- for rear ring and precision fitted rotary dovetail for front ring. Burris, Millett and Redfield. chined to true MIL-STD 1913 specs Heavy duty Picatinny rings are precision machined from solid Note: “STD” Mount Bases accept Burris, Millett and Redfield SPECS: Steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") I.D. Gloss, to fit Picatinny-type bases such as aluminum billet as matched pairs to aid in obtaining the best rotary dovetail rings. polished blue. Matte, matte blue. Silver, satin nickel. Height mea- Brownells Modular Flattop Riser Mount and Picatinny Scope possible alignment. Each pair is clamped together and the center SPECS: 12L14 cold rolled steel. Polished Blue (PB), Matte blue surements are from top of base to center of ring: 1", 26mm and Bases. No special wrenches needed for installation. Underside holes bored to 30mm to tolerances of +/-.0014", then engraved (MB), Satin nickel (SIL) finish. Long Range (LR) gives additional 30mm: Super Low, .550" (13.9mm). Low, .650" (16.5mm). Me- of ring is undercut with a rounded radius that offers extra clear- with matching serial number. In addition, the lower halves are elevation. All include TORX mounting screws. dium, .770" (19.55mm). High, .900" (22.86mm). Super High, 1" marked to prevent separation from their matched ring caps. All (25.4mm). Extension Ring Set (Extension) contains one standard ance for finger tightening the nut and for final tightening with a riFLE MODEL ACTION FINISH STOCK # rings & bases standard socket or flat-blade screwdriver. Extra-strong U.S.-size edges are beveled or radiused, including both sides of the steel ring, and one front extension ring that offsets ring spacing .650" Browning FN Action Long PB #526-261-620AK hex nuts have a deep slot that provides maximum engagement ring nut, to minimize potential for snagging on other gear. Sur- (16.5mm). of screwdriver blade to help prevent slippage and slot dam- faces are blasted to ensure an even, matte finish, then hard an- A-Bolt Short MB #526-000-034AK STOCK # SIZE FINISH/STYLE HEIGHT odized with a durable black finish for added strength and wear age—you can even use a U.S. quarter in a pinch. Crossbolt has a A-Bolt Long MB #526-000-035AK #526-261-590AK 1" Gloss Low square shank that serves as a recoil lug to solidly engage scope resistance. Crossbolt and nut are machined from chrome-moly steel, heat treated for exceptional strength, and blued. Steel, BAR semi auto PB #526-261-630AK #526-261-600AK 1" Gloss Medium base when properly installed to ensure rings won’t shift forward ® under recoil. Four, strong 6-40 x ¼" T-15 Torx® head screws se- Torx screws, four per ring, have matching finish. Separately BLR lever action pre-’96 PB #526-261-640AK #526-261-610AK 1" Gloss High curely anchor the ring halves, and large contact area with scope available, precision-machined polymer inserts allow use of these #526-463-970AK 1" Gloss Super High rings with 1" diameter scope tubes. ab BSA Monarch right hand Short PB #526-261-670AK helps prevent slippage even on heavy-recoiling, magnum rifles. #526-408-270AK 1" Matte Super Low Available in 4140 billet steel for superb strength and stability, SPECS: Rings – Body: Aluminum, hardcoat anodized, matte black. Monarch right hand Long PB #526-261-660AK Crossbolts/Nuts/Cap Screws – Chrome-moly steel, blued. Height #526-404-790AK 1" Matte Low or aluminum models machined from 6061 T6 billet for reduced Harrington & Richardson Long PB #526-261-620AK weight. Matte black finish blends with most factory rifle and from top of base to inside bottom of ring: .400" (10.1mm). Fits #526-404-800AK 1" Matte Medium scope finishes. Replacement nut, crossbolt, and aluminum or scopes with 30mm O.D. tubes. Mounts to MIL-STD 1913 Picatinny Howa 1500 Long PB #526-261-660AK #526-461-340AK 1" Matte High steel side locking bars available separately. ab bases. Inserts – Machined polymer, black. Husqvarna Crown Grade & Carl Gustaf PB #526-261-720AK #526-463-980AK 1" Matte Super High #296-000-109AK 30mm Tactical Scope Rings, 1 Pair, SPECS: Rings sold in pairs. Models available to fit 1" and 30mm JC Higgins Model 51 PB #526-261-720AK #526-452-690AK 1" Silver Low scope bodies. Steel - 4140 billet steel, black, matte, oxide finish. 6B104Z49...... $ 124.99 #526-453-380AK 1" Silver Medium Aluminum - 6061 T6 aluminum billet, hardcoat anodized black, #296-000-110AK Inserts For 1" Scopes, 1 Pair, Model 53 Long PB #526-261-620AK 6B13Z49...... 14.99 matte. Heights measured from top of base to center of ring: Low - Marlin 36 / 336 PB #526-261-650AK #526-470-680AK 1" Silver High .825" (2.1cm); Med. - 1" (2.5cm); High - 1.125" (2.9cm); Extra-High #526-499-080AK 1" Gloss, Extension Low Model 455 Long PB #526-261-620AK - 1.375" (3.5cm). FARRELL INDUSTRIES #526-499-100AK 1" Matte, Extension Low #080-000-436AK Low 1" Picatinny Rings, Steel, Model 7 Long PB #526-261-700AK #526-294-250AK 1" Gloss, Extension Medium 9A89V12...... $ 109.99 PICATINNY SCOPE RINGS Mauser FN & Mk X, Parker Hale PB #526-261-620AK #080-000-437AK Med. 1" Picatinny Rings, Steel, #526-499-110AK 1" Matte, Extension Medium 9A87V74...... 100.00 Unique Clamping System Ensures Unaltered Large Ring 98 PB #526-261-730AK #526-478-820AK 1" Gloss, Extension High #080-000-438AK High 1" Picatinny Rings, Steel, The Maximum Amount of Torque Mossberg 1500 / 1700 Long PB #526-261-660AK #526-478-830AK 1" Matte, Extension High 9A80V00...... 100.00 100% machined, solid steel, scope rings use Model 1500 / 1700 Short PB #526-261-670AK #526-517-180AK 30mm Matte Low #080-000-433AK Low 1" Picatinny Rings, Alum., an innovative, built-in, radius clamp that gives outstanding Remington #526-499-600AK 30mm Gloss Medium 9A48V00...... 60.00 torque and a solid fit. When you tighten the large Torx screw, a #080-000-434AK Med. 1" Picatinny Rings, Alum., convex extension on the moveable jaw is forced into a matching, Model 4, 6, 7400, 7600 PB #526-349-200AK #526-455-840AK 30mm Matte Medium 9A48V00...... 60.00 concave recess on the ring for exceptional clamping power. Rings MB #526-000-001AK #526-510-340AK 30mm Matte, Extension Medium #080-000-435AK High 1" Picatinny Ring, Alum., in each set are simultaneously machined and uniquely num- #526-524-940AK 30mm Silver Medium 9A48V00...... 60.00 700, 721, 725, 40-X right hand Long PB #526-261-660AK bered for ultimate consistency between the pair. Skeletonized #526-470-050AK 30mm Gloss High #080-000-811AK Med. 30mm Picatinny Rings, Steel, caps reduce weight, not overall strength. Fits Picatinny rails. ba Long MB #526-000-036AK 8K94B99...... 119.99 #526-499-590AK 30mm Matte High SPECS: Steel barstock, blued, matte finish. Height measured from 700 left hand Long PB #526-263-160AK #080-000-740AK High 30mm Picatinny Rings, Steel, top of base to inside bottom of ring. 1" (25.4mm) Standard - .335" #526-510-350AK 30mm Matte, Extension High 9A94Y99...... 119.99 (8.5mm); 1" High - .535" (13.6mm); 30mm (1.18") Standard - .243" 700 matte LR long range Long MB #526-517-320AK #526-524-950AK 30mm Silver High #080-000-741AK Ex-High 30mm Picatinny Rings, Steel, (6.2mm); 30mm High - .443" (11.3mm). 700 silver LR long range Long SIL #526-517-330AK #526-524-001AK 30mm Matte Super High 8K94Y99...... 119.99 #100-000-893AK 1" Standard Rings 8K142C99. . . . $ 178.99 #080-000-810AK Med. 30mm Picatinny Rings, Alum., #100-000-894AK 1" High Rings 8K142C99...... 178.99 7, 700, 721, 725, 40-X right hand Short PB #526-261-670AK #526-524-960AK 30mm Silver Super High 8K69B99...... 89.99 #100-000-895AK 30mm Standard Rings 8K149C99. . . 173.99 700 matte Short MB #526-500-060AK — Advise # — 1" Gloss & Matte Rings 6B24H00. . $ 27.99 #080-000-738AK High 30mm Picatinny Rings, Alum., #100-000-896AK 30mm High Rings 8K142C99. . . . . 178.99 — Advise # — 1" Silver Rings 6B31Y25...... 35.99 9A69Y99...... 89.99 700 silver Short SIL #526-501-610AK — Advise # — 1" Extension Rings 6B32H26. . . . . 37.99 #080-000-739AK Ex-High 30mm Picatinny Rings, Alum., 700 matte LR long range Short MB #526-517-340AK — Advise # — 26mm & 30mm Rings 6B36Y03. . . . 41.99 8K69Y99...... 89.99 LEUPOLD PRW RINGS 600, 660, XP-100 single shot Short PB #526-261-670AK — Advise # — 30mm Extension Rings 6B49Y95. . . 57.99 #080-000-708AK Replacement Hex Nut 8K05Z33. . . 7.99 #080-000-709AK Replacement Crossbolt 8K04Z25. . .5.99 Weaver-Style, All-Steel, 740, 742, 760 PB #526-261-680AK #080-000-706AK Rpl Locking Bar, Steel 8K04Z98. . . 6.99 For Rock-Solid Mounting Ruger 10/22 PB #526-322-620AK ASK ABOUT OVERNIGHT DELIVERY! #080-000-707AK Rpl Locking Bar, Alum. 8K04Z25. . .5.99 Machined from steel barstock with MB #526-517-230AK the strength and accuracy necessary to SIL #526-517-240AK EGW PRACTICAL ALUMINUM RINGS hold large objective scopes securely against recoil. Solid steel Springfield ‘03-A3 PB #526-261-750AK clamp uses two TORX screws to firmly lock rings to base while M-77 round action Long PB #526-261-660AK Thompson Center .22 Classic PB #526-000-063AK Low Profile & High Strength the square steel recoil lug holds tightly against movement. Split Sako round action PB #526-261-620AK below the centerline, each ring features four screws that let you Weatherby FN action PB #526-261-620AK Vertically split, low-profile rings tighten the cap with-out rotating the scope. Savage 110 thru 116 right hand Long PB #526-290-980AK clamp to MIL-STD 1913 Picatinny rails Vanguard right hand Long PB #526-261-660AK SPECS: Steel, powder-coat finish. Available in Gloss Black, and or Weaver-style bases and provide an 10 thru 16, Striker right hand Short PB #526-523-160AK Matte Black. Rings sold in pairs. Height measured from base to Western Field Model 740 PB #526-261-650AK eye-pleasing, streamlined look without 110 thru 116 left hand Long PB #526-502-190AK center of ring. Low - .730" (18.5mm); Medium - .850" (21.5mm); compromising strength. Ring halves Winchester Model 70 Long PB #526-261-700AK High - .980" (24.8mm). 110 thru 116,right hand w/AccuTrigger Long PB #526-000-065AK clamp together with four, steel Allen head screws for a tight Long MB #526-000-037AK STOCK # 1" STOCK # 30mm HEIGHT FINISH 10 thru 16,right hand w/AccuTrigger Short PB #526-000-068AK hold on optic and rail. Steel cross-bar locks in the rail slot or Model 70 LR long range Long MB #526-517-360AK base to prevent slippage under recoil. Available for 1" and 30mm #526-541-440AKNA Low Matte Black Short MB #526-000-069AK diameter scope tubes. ab Model 70 LR long range Short MB #526-517-380AK #526-541-470AKNA Med Gloss Black Short SIL #526-000-070AK SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbar. #526-541-490AK #526-541-670AK Med Matte Black Post ‘64 Mod. 70, 70A, 670, 770, and Pre ‘64 Win. Mod 70, Sold in pairs. Height measured from top of base to center of ring. Model 99 Lever Action PB #526-261-690AK #526-541-500AK #526-541-770AK High Matte Black Ser. # higher than 66,350 —not including Express H&H magnums— 1" – .750" high. 30mm – .840" high. S&W 1500 early model PB #526-261-720AK #296-000-161AK 1" Practical Rings 6B51X43. . . . $ 59.99 — Advise # — 1" PRW Rings 6B43A00...... $ 45.00 — Advise # — One-Piece Base 6B19H00...... $ 21.99 #296-000-160AK 30mm Practical Rings 6B51X43. . .59.99 — Advise # — 30mm PRW Rings 6B49A99...... 53.00 1500 right hand Long PB #526-261-660AK — Advise # — Long Range Base 6B22Y77...... 26.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 254 SINCE 1939 Office/Tech: 641-623-5401 LEUPOLD LEUPOLD LEUPOLD MARK 4 RINGS LEUPOLD DUAL DOVETAIL SCOPE TWO-PIECE RIFLE Rock-Solid, Heavy-Duty Mounts RIMFIRE RINGS For Extreme Field & Tactical Use MOUNTS & RINGS BASE SETS No-Drill, No-Tap Design rings & bases Heavy-duty rings are built to For ³⁄8" & 13mm Dovetails Absolutely The Strongest Two-piece base sets, CNC ma- withstand extreme service without Ring & Base System chined to exacting tolerances, provide rock solid scope mount- movement or loss of zero. Larger All-steel rings mount 1" scopes on ing. Reversible and long rear bases make it easy to use standard rimfire rifles and handguns with integral 3/8" or 13mm receiver Available contact area between the scope/ ® rings to mount scopes, from extra long varmint and target mod- rings and base/receiver for less chance of movement. Large hex dovetails. Torx screw mounting system guarantees these rings Leupold’s famous rotary els to small compacts on any length action. Front bases accept nuts on rings allow fast torquing of cross bolts for easy adjust- stay put! dovetail rings in BOTH Leupold’s (and Burris/Redfield/Millett) rotary dovetail ring. ment. Non reflective, matte finish. Mounting screws and Torx® SPECS: Steel, high-polish blue. Torx head wrench included. Height front AND rear bases; The rear base uses standard Leupold/Burris/Redfield windage, head wrench included. Steel Rings - CNC machined from solid measured from top of base to center of ring. there’s no way a ring can screw-secured ring. 11L17 cold-rolled bar stock, then blued. Aluminum Rings – CNC STOCK # FITS DOVETAIL HEIGHT shoot off its base. Ideal for large caliber, heavy kicking rifles SPECS: 12L14 Cold Rolled Steel. Polished blue (PB), Matte blue machined from 7075 T651 aluminum alloy and hardcoat anod- 3 that can throw a scope off easily, plus light caliber varmint rifles #526-000-049AK ⁄8" Med. - .875" (22.2mm) (MB), or Satin nickel (SIL) finish. Includes 2 bases with TORX ized for maximum strength and wear resistance. 3 #526-000-050AK ⁄8" High - 1" (25.4mm) that need an absolutely rigid scope mount to make full use of the screws. (RF) Reversible front base. (RR) Reversible rear base. SPECS: Steel or aluminum, matte black finish 1" (2.5cm) or 30mm gun’s accuracy potential. Dual Dovetail Bases and Rings must RIFLE MODEL STK # SIL STK # MB STK # PB (1.18in) inside diameter. Height from top of base to center of ring – Advise # – 1" Rimfire Scope Rings 6B42H99. . . $ 49.99 be used together; will not interchange with other Leupold rings Austin & Halleck NA NA #526-500-320AK for both 1" and 30mm: Med. - .84" (2.1cm); High - 1.06" (2.7cm); and bases. Rings and bases sold separately; select the correct Super High - 1.4" (3.5cm). LEUPOLD base set for your rifle, then choose rings. Browning FN action NA #526-462-900AK #526-370-070AK #526-000-085AK 1" Med. Alum. Rings 6B141Y67. . $ 163.99 ™ DUAL DOVETAIL RIFLE BASE SETS - Those marked “Rev. Frt.” FN action RF NA NA #526-370-080AK #526-502-220AK 1" Super High Steel Rings, QUICK-RELEASE MOUNT SYSTEM have reversible front base to help get correct ring spacing. A-Bolt long rear base #526-451-570AK #526-462-970AK #526-417-770AK 6B141Y67...... 163.99 Remove Scope In #526-000-086AK 1" Super High Aluminum Rings, SPECS: Steel. Finish: Standard Std. and PB, polished, blue; Matte, A-Bolt Std. rear base NA NA #526-492-250AK Seconds; matte, blue; Silver, matte. 6B141Y67...... 163.99 A-Bolt WSSM NA #526-000-076AKNA #526-000-082AK 30mm Med. Aluminum Rings, Positive Return To Zero STOCK # MODEL/FINISH FITS X-Bolt #526-000-104AK #526-000-102AK #526-000-103AK 6B141Y67...... 163.99 Remove the scope with #526-405-080AK 700 PB Rem. 700 Short & Long BLR Lightning NA #526-502-380AK #526-502-370AK #526-000-053AK 30mm High Steel Rings 6B141H67. 163.99 just a twist of the levers #526-463-100AK 700 Matte 721/722/725/40X; Ruger 77 BR 1885 Low-Wall (Will not fit #526-000-083AK 30mm High Aluminum Rings, and reinstall it in only sec- #526-000-088AK 700 Silver (round receiver only); BPCR, Traditional) NA NA #526-512-600AK 6B141Y67...... 163.99 onds with no loss of zero. #526-520-830AK 30mm Super High Steel Rings, Double-lever, dual locking #526-463-140AK 700 Rev. Frt/Matte BSA Monarch; S&W 1500 BR 1885 Hi-Wall (Will not fit 6B141A67...... 163.99 BPCR, Traditional) NA NA #526-492-220AK cam system withstands #526-405-050AK 70 PB Win. 70 Short & Long #526-000-084AK 30mm Super High Aluminum Rings, the recoil from any rifle cartridge without shooting loose or ac- #526-463-170AK 70 Matte Win 70 Short & Long BSA Monarch NA #526-476-640AK #526-370-030AK 6B141Y67...... 163.99 cidentally unlocking. #526-000-057AK 70 Rev. Frt/Matte Win 70 Short & Long Monarch RF #526-463-010AKNA #526-370-040AK SPECS: Steel. Polished blue (PB) or matte blue (MB) finish. 1-piece #526-000-058AK 70 Rev. Frt/Matte Win 70 Express w/.330" Harrington & Richardson 300, LEUPOLD RUGER®, SAKO & CZ RINGS bases fit right-hand actions only. 2-piece bases sold per pair to rear hole spacing 301, 330, 370 (FN Mauser) NA #526-462-900AK #526-370-070AK fit RH, and LH actions. Rings, sold in pairs, 1" (2.5cm) or 30mm Ringmounts Fit Directly (1.18") dia. Ring heights measured from top of base to center of #526-501-590AK A-Bolt Rev. Frt/ Matte Browning A-Bolt H&R (FN Mauser) RF #526-370-080AK Onto Factory Integral Bases ring. Low; .650" (16.5mm). Medium; .770" (19.5mm). High .900" #526-000-105AK X-Bolt/Matte Browning X-Bolt JC Higgins Model 51 NA #526-462-900AK #526-370-070AK (22.8mm), Super High; 1.0" (2.5cm). Extension Rings include one 5 #526-000-106AK X-Bolt/PB Browning X-Bolt Model 51 RF NA NA #526-370-080AK Famous Leupold styling and qual- standard ring and one that is extended ⁄8" to allow mounting a wide ity in rings that mount directly to the variety of scopes. #526-517-050AK Mark V Std. Wthby Mark V Kimber 84 NA #526-000-108AKNA integral dovetails on Ruger, Sako, and QUICK-RELEASE TWO-PIECE BASES - BLUE #526-517-060AK Mark V Matte Wthby Mark V 8400 NA #526-000-109AKNA Ruger CZ rifles. #526-517-070AK Mark V Rev. Frt/Matte Wthby Mark V Knight Disk, Wolverine NA NA #526-000-029AK SPECS: Steel, high-polish blue (PB) or STOCK # PB STOCK # MB FITS #526-000-059AK Encore/Matte/One-piece Thompson Center Encore Marlin 455 NA #526-462-900AK #526-370-070AK matte blue (MB) finish. Ring heights are from top of base to center #526-471-840AK#526-471-850AK BSA Monarch, Rem. 40X, 700,721, 722, 725, of ring. #526-000-060AK Encore/Silver/One-pieceThompson Center Encore 455 RF NA NA #526-370-080AK S&W 1500, Weatherby Mk V, Vanguard #526-500-550AK #526-500-560AK Mark X (Mauser) — Advise # — Dual Dovetail Rifle Base, Model 7 NA #526-462-800AK #526-370-050AK STOCK # DIA./HT. FITS FINISH ® 6B19A00...... $ 21.99 Model 7 RF/RR NA NA #526-370-060AK #526-423-460AK 1"/Low .734" Ruger No.1 & 77/22 PB NA #526-471-890AK Win. 70 Mauser FN, Mark X, Parker Hale NA #526-462-900AK #526-370-070AK #526-502-170AK 1"/Hi 1.150" Ruger No.1 & 77/22 MB NA #526-500-620AK Win. 70 Express, Pre ’64 DUAL DOVETAIL MOUNT RINGS - Heights from Low for small w/.435" rear hole spacing scopes to Super High for giant objective bells. Sold in Pairs. Mauser RF NA NA #526-370-080AK #526-499-520AK 1"/Hi 1.025" Ruger M77® MB NA #526-500-630AK Win. 70 Express, Post ’64 SPECS: Steel. Finish: PB, polished, blue; Matte, matte, blue; Sil- #526-463-950AK 1"/S.Hi 1.125" Ruger M77 PB Swedish M-96 NA #526-512-630AKNA w/.330" rear hole spacing ver, matte. Height is from top of base to center of rings. Mauser ’98 NA #526-000-075AKNA #526-499-440AK 1"/S.Hi 1.125" Ruger M77 MB #526-500-650AK Gunmaker’s Bases, bottom not contoured STOCK # DIA./DESCRIPTION/FINISH HEIGHT Remington Model 7 NA NA #526-512-560AK #526-510-410AK 30mm/Med .895" Ruger M77 MB — Advise — Q-R 2-Pc Bases, PB or MB, #526-408-250AK 1"/Low/PB .650" 700, 721, 725, 40-X, 700BP NA #526-476-640AK #526-370-030AK #526-510-420AK 30mm/Hi 1.025" Ruger M77 MB 6B51A84 ...... $ 59.99 #526-462-220AK 1"/Low/Matte .650" 700 RF #526-463-010AK #526-000-030AK #526-370-040AK #526-510-430AK 30mm/S.Hi 1.125" Ruger M77 MB QUICK-RELEASE ONE-PIECE BASES - BLUE #526-523-130AK 1"/Low/Silver .650" 710 NA #526-541-000AKNA #526-423-420AK 1"/Low .734" Sako PB STK # PB STK # MB FITS #526-444-240AK 1"/Medium/PB .770" 541 NA NA #526-000-029AK #526-423-430AK 1"/Med .859" Sako PB #526-462-250AK 1"/Medium/Matte .770" NA #526-000-055AK Marlin 336/1895 Ruger M-77 round action NA #526-476-640AK #526-370-030AK #526-461-900AK 1"/Hi 1.05" Sako PB #526-523-230AK 1"/Medium/Silver .770" NA #526-512-470AK Rem. 7, 700 Model 77 RF #526-463-010AKNA #526-370-040AK #526-510-360AK 30mm/Med .859" Sako MB #526-470-540AK 1"/High/PB .900" NA #526-000-005AK Thompson Center Encore Sako round action NA #526-462-900AK #526-370-070AK #526-510-370AK 30mm/Hi 1.05" Sako MB — Advise # — Q-R 1-Piece Base 6B51H84. . . . $ 59.99 #526-470-570AK 1"/High/Matte .900" Sako RF NA NA #526-370-080AK #526-000-051AK 1"/Med 1" CZ 550 MB #526-000-061AK 1"/High/Matte/Ext. .900" QUICK-RELEASE RINGS - MATTE BLUE Savage 10/110, 16/116 w/Accu- #526-000-052AK 1"/Med 1" CZ 527 MB #526-470-640AK 1"/Super High/Matte 1" Trigger; also fits Edge #526-000-074AK #526-000-073AK #526-000-072AK STOCK # DIAMETER/HEIGHT #526-522-420AK 30mm/Low/Matte .650" — Advise # — 1" Ringmounts 6B56H91...... $ 65.99 #526-471-796AK 1"/Low S&W 1500 NA #526-476-640AK #526-370-030AK — Advise # — 30mm Ringmounts 6B69Y53. . . . . 80.99 #526-499-570AK 30mm/Medium/Matte .770" 1500 RF #526-463-010AKNA #526-370-040AK #526-471-810AK 1"/Medium #526-499-580AK 30mm/High/Matte .900" Tikka Whitetail Hunter NA NA #526-000-056AK #526-499-760AK 1"/Medium Extended #526-000-062AK 30mm/High/Matte/Ext. .900" Weatherby FN action NA #526-462-900AK #526-370-070AK #526-471-816AK 1"/High Win. 70 RF / RR Post ‘64 Model 70, 70A, 670, 770 and Pre-’64 Model #526-522-340AK 30mm/Super High/Matte 1" #526-517-150AK 1"/Super High FN action RF NA NA #526-370-080AK 70 Serial# above 66, 360—except 70 Express, #526-499-310AK 30mm/Medium — Advise # — 1" Dual Dovetail Rings 6B24H00. . $ 27.99 Vanguard NA #526-476-640AK #526-370-030AK H&H magnum actions NA #526-000-031AK #526-370-060AK — Advise # — 30mm Dual Dovetail Rings, #526-499-330AK 30mm/High Vanguard RF #526-463-010AKNA #526-370-040AK 70 Express H&H magnum action 6B36A03 ...... 41.99 Mk V NA #526-517-010AK #526-517-000AK #526-517-160AK 30mm/Super High — Advise # — 1" Extension Rings, High 6B32H26 . . 37.99 .330" hole space RF NA #526-503-780AKNA Mk V RF NA #526-517-030AKNA — Advise # — 1" Q-R Rings 6B25A30...... $ 29.99 — Advise # — 30mm Extension Rings, High, 94 Angle Eject NA NA #526-000-032AK — Advise # — 30mm Q-R Rings 6B37H92. . . . . 43.99 6B49H95 ...... 57.99 Winchester 70 RR NA #526-462-800AK #526-370-050AK —Advise #— Two-Piece Base Set 6B19A00. . . . $ 21.99 #526-499-760AK 1" Med. Q-R Ext Rings 6B32H92. . . 37.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 255 LEUPOLD MILLETT ANGLE-LOC® SCOPE RINGS MILLETT ANGLE-LOC™ REDFIELD JR 1-PIECE BASE QRW RING & BASE SYSTEM Windage Adjustable, Mount Directly .22 SCOPE RINGS Precision craft- To Weaver, European Dovetail & Ruger® ed of the finest All-Steel, Weaver-Style Windage Adjustable; The Strength Of Steel tool steel. Built Components Weaver-style rings with individual, right- Precisely align crosshairs to bore without us- to take heaviest With Quick Release Levers; and left-hand locking clamps provide exter- recoil without shooting loose. Streamlined for good looks, rug- nal windage changes to conserve your scope’s ing up your scope’s internal adjustments just Start Fresh Or Retrofit 3 ged for dependability. Available for popular shotguns and rifles. internal windage adjustment. Heat-treated, getting sighted in. ⁄8" dovetail rings have dual To Existing Bases opposed locking screws for additional windage adjustment. In- SPECS: Steel. Polished Blue (PB) or Matte Blue (MB). Long Action nickel steel gives strength and durability. (LA), Short Action (SA). The strength of cross-slot mount- Internal surfaces are splined to help grip the dividual steel clamps give a secure fit to all dovetail receivers. ing combined with Leupold quality, scope body and prevent movement or loss of zero caused by re- Interlocking alignment guides ensure ring caps are correctly po- JR 1-PIECE BASES plus the added convenience of quick coil. Fit all Weaver-style bases. Extension (Ext.) rings add .500" sitioned, while splined internal surfaces provide a secure grip. ba release levers. With the rings split at an angle, below the center- forward or rearward for easier mounting of long target or mini- SPECS: Steel, blued, polished or matte finish. 1" (2.5cm) or 30mm STOCK # FINISH (MODEL) FITS 3⁄ rings & bases line, it’s easy to tighten the TORX head screws evenly without scopes. BRNO CZ rings fit the unique dovetail found on ZKK 600, (1.18") to fit 8" dovetail receivers. Sold in pairs only. Ring heights #750-511-138AK PB (JR-MK) BRNO 757 Small Ring measured from top of base to inside bottom of ring: 1" Low - .275" causing the scope to “roll” in the rings. Spring-loaded, adjust- 601, 602 and 550 rifles. CZ 527 rings fit CZ527 receivers only. ab #750-511-134AK PB (JR-FN) Browning FN Action (6.9mm); 1" Med. - .395" (10mm); 1" High - .525" (13mm); 30mm able levers can be moved so both rest at the same angle after SPECS: Steel. Polished blue (Smooth), matte blue (Matte), or #750-511-126AK PB (JR-700LA) BSA Monarch LA, Round Receiver tightening. matte silver, nickel-plated finish (Nickel) in 1" (2.5mm) or 30mm Med. - .477" (12mm). #750-511-227AK PB (JR-700SA) BSA Monarch SA, Round Receiver SPECS: Steel, powder-coated finish. Available in Gloss Black (GB), diameter to fit Weaver-style bases. Sold in pairs only. Ring heights STOCK # DIA./HEIGHT FINISH PRICE Matte Black (MB) and Silver (SIL). Rings and bases sold in pairs. measured from top of base to inside bottom of ring. Heights for #601-000-001AK 1" Low Polish 1K20Y24 $ 22.49 #750-511-134AK PB (JR-FN) Colt 57 30-06 & FN Mauser all except CZ 527 and Ruger®: 1" Low, .275" (6.9mm); 1" Med., Ring heights measured from top of base to center of ring: 1" Low #601-000-002AK 1" Medium Polish 1K20Y24 $ 22.49 #750-511-126AK PB (JR-700LA) Howa 1500 - .750" (19.1mm); 1" Medium - .880" (22.4mm); 1" High - 1.000" .395" (10mm); 1" High, .525" (13mm); 1" Ex High, 1.025" (2.6cm); #601-000-003AK 1" High Polish 1K20Y24 $ 22.49 #750-511-134AK PB (JR-FN) H & R 300, 301, 330, 370 (25.4mm); 30mm Low - .840" (21.3mm); 30mm Medium - .970"; 30mm Low, .210" (5.3mm); 30mm Med., .477" (12mm); 30mm prior to 1973 (24.6mm); 30mm High - 1.090" (27.7mm). High, .622" (15.7mm). CZ527 heights: 1" Low, .470" (11.9mm); 1" #601-000-004AK 1" Low Matte 1K20Y24 $ 22.49 Med., .590" (14.9mm); 1" High, .725 (18.4mm). Ruger heights: 1" #750-511-134AK PB (JR-FN) Interarms Mark X QRW RINGS #601-000-005AK 1" Medium Matte 1K20Y24 $ 22.49 Med.; .586" (14.9mm), 1" High, .710" (18mm); 30mm Med., .397" #750-511-134AK PB (JR-FN) Marlin 455 #601-000-006AK 1" High Matte 1K20Y24 $ 22.49 STOCK # 1" STOCK # 30mm HEIGHT FINISH (10mm); 30mm High, .510" (13mm). #750-511-137AK PB (JR-M) Mauser 98 #601-000-011AK 30mm Medium Matte 1K23Y39 $ 25.99 #526-498-001AK NA Low Gloss Black STOCK # DIA./HEIGHT FINISH PRICE #750-511-134AK PB (JR-FN) Mauser FN, Mark 10, #526-498-530AK #526-498-610AK Low Matte Black #601-902-101AK 1" Low Smooth 1K24V29 $ 26.99 11mm DOVETAIL ANGLE-LOC .22 CAL. RINGS - Steel rings fit Parker Hale 1100 European, grooved receivers with an 11mm dovetail. #750-511-138AK PB (JR-MK) Mauser ‘96 Swedish #526-498-540AK NA Low Silver #601-902-102AK 1" Medium Smooth 1K24V29 $ 26.99 SPECS: Steel, blue, matte finish. 1" (2.5cm) diameter. Medium #526-498-550AK NA Med. Gloss Black #601-902-103AK 1" High Smooth 1K24V29 $ 26.99 height;.60" (15.2mm) high. Ring heights measured from top of base plus other Small Ring #526-498-560AK #526-498-630AK Med. Matte Black #601-902-201AK 1" Low Matte 1K24V29 $ 26.99 to inside bottom of ring. #750-511-126AK PB (JR-700LA) Mossberg 1500, 1700 LA/SA #601-000-045AK 11mm Dovetail Rings 1K24Y29. . . $ 26.99 #526-498-670AK NA Med. Silver #601-902-202AK 1" Medium Matte 1K24V29 $ 26.99 #750-511-227AK PB (JR-700SA) Rem. 7 Lightweight, XP-100 #750-511-227AK PB (JR700SA) Rem. 600, 660 SA #526-498-580AK #526-498-650AK High Matte Black #601-902-203AK 1" High Matte 1K24V29 $ 26.99 #601-000-013AK 1" Ex High Matte 1K26Y99 $ 29.99 MILLETT #750-511-227AK PB (JR700SA) Rem. 700 SA, (RH) — Advise # — 1" QRW Rings 6B55H68 ...... $ 64.99 ANGLE LOC DETACHABLE 40X, 78, 722, 725 #601-903-201AK 30mm Low Matte 1K26V99 $ 29.99 — Advise # — 30mm QRW Rings 6B68H30 . . . . . 78.99 #750-532-227AK MB (JR700SA) Rem. 700 SA, (RH) #601-903-202AK 30mm Medium Matte 1K26V99 $ 29.99 ALUMINUM RINGS QRW BASES #750-511-126AK PB (JR-700LA) Rem. 700 LA, (RH) #601-903-203AK 30mm High Matte 1K26V99 $ 29.99 Aluminum Alloy For Less Weight STOCK # MODEL # FINISH FITS 40X, 78, 721, 725 EXTENSION RINGS #526-498-410AK QRW 700 MB Rem. 700/721/722/725, Horizontally split and made from heat- #750-532-126AK MB (JR-700LA) Rem. 700 LA, (RH) treated aluminum alloy to dramatically 40X, short & long, #601-904-213AK 1" High (1 ext/1 std) Smooth 1K29V69 $ 32.99 #750-511-228AK PB (JR-760) Rem. 740 742, 760 right- and left-hand #601-905-213AK 1" High (2 ext) Smooth 1K33V29 $ 36.99 cut weight without compromising strength. Allen-head cross bolts make them easy to re- #750-511-159AK PB (JR-788LA) Rem. 788 LA .222 Mag, #526-498-380AK QRW 70 MB Win. 70, short & long BRNO CZ RINGS move and replace. Fit Weaver-style bases. 22-250, 30-30 #526-498-360AK QRW 70 Exp Pre-64 MB Win. 70 Exprs, Pre-’64 #601-000-020AK 1" Medium Matte 1K36Y89 $ 40.99 SPECS: Aluminum, black or silver matte finish. Fits 1" (2.5cm) dia. #750-511-161AK PB (JR-788XL) Rem. 788 X LA .243, .308, .358 w/.435" rear hole RUGER 77/22®, No. 1, No. 3 & RANCH RIFLE scope bodies. Height from top of base to inside bottom of ring: Low #750-511-126AK PB (JR-700LA) Ruger 77 Round Receiver, LA space - .150" (3.8mm); Medium - .285" (7.2mm); High - .560" (14.2mm). #601-906-310AK 1" High Smooth 1K22V49 $ 24.99 #750-511-134AK PB (JR-FN) Sako, Mauser Actions #526-498-350AK QRW 70 Exp Post-64 MB Win. 70 Exprs, Post-’64 ® RUGER M77 , SUPER REDHAWK® STOCK # DIA/HEIGHT/COLOR PRICE #750-511-134AK PB (JR-FN) Sears (J.C. Higgins) 50, 51, w/.330" rear hole space #601-000-030AK 1" Low, Black 1K11Y96 $ 13.49 #601-908-130AK 30mm Medium Smooth 1K30V14 $ 33.49 Mauser Action — Advise # — QRW Bases 6B30H38...... $ 34.99 #601-000-032AK 1" Medium, Black 1K11Y96 $ 13.49 #750-511-227AK PB (JR-700SA) Smith & Wesson #601-000-033AK 1" Medium, Silver 1K11Y96 $ 13.49 1500 & 1600, .243 Cal. NIGHTFORCE MOUNTING SOLUTIONS #601-000-034AK 1" High, Black 1K11Y96 $ 13.49 #750-511-126AK PB (JR-700LA) S&W 1500, 1600 & 1700 SAVAGE/REMINGTON #750-511-142AK PB (JR-S) Springfield '03 30mm TACTICAL RINGS TACTICAL RINGS #750-511-141AK PB (JR-S Spec) Springfield '03-A3, A4 MILLETT Extra Strong For Police & BASES Solid Steel Bases VERTICAL SPLIT RINGS #750-511-250AK PB (JR-TC Encore Rifle) & Military Applications & Rings Aluminum Alloy For Less Weight TC Encore Rifle, Single Dovetail Rings feature four, high- Withstand Heavy Milled from barstock, these rings strength socket screws on the #750-511-126AK PB (JR700-LA) Weatherby Mark V, Vanguard Use Vertically split scope rings made Right Hand provide the solid strength required caps plus, hex-head, Weaver- from aluminum alloy dramatically cut for harsh field and tactical use. With style locking nuts and maxi- weight without compromising strength. #750-532-126AK MB (JR700-LA) Weatherby Vanguard four TORX screws per cap, the scope mum-size cross bolts to stand Tempered, Allen-head cross bolts and #750-511-134AK PB (JR-FN) Weatherby FN action is securely locked into the ring to up to the most severe recoil one clamp make it easy to remove and 1 #750-511-134AK PB (JR-FN) Western Field 30-06 prevent recoil movement. Large, ⁄2" hex nut lets you torque ring without shifting or loss of zero. replace these rings. Models for 1" and 3 #750-511-223AK PB (JR-336R) Western Field 740 securely to any MIL-STD 1913 Picatinny base, and helps achieve Rings fit 30mm scope bodies. 30mm scopes. Rimfire fits nominal ⁄8" .22 rimfire receiver dove- a consistent return to zero. Steel cross lug provides additional Solid steel bases have slots tails. Weaver fits Weaver-style bases. #750-511-114AK PB (JR-70AM) Win. 70 Target strength, prevents shifting caused by recoil. ab that accept both Picatinny SPECS: Aluminum, black, Matte (MB) or Gloss (GB) finish. Height #750-511-114AK PB (JR-70AM) Win. 70 Belted Magnum 5 SPECS: Steel, parkerized, matte finish. 30mm I.D. ⁄8" (15.9mm) rings and many Weaver-style rings for easy scope mounting. from top of base to inside bottom of ring: Rimfire (RF) - Medium between #66,350 & 700,000 wide. Height measured from top of base to bottom of scope body: Models available for Remington 700 long action (LA) and short .220" (5.6mm); Weaver - Medium .285" (7.2mm). — Advise # — JR PB Base 5E17C43 ...... $ 24.99 action (SA), plus Savage short action. AccuTrigger model fits Low - .300" (7.6mm), Medium - .400" (10.2mm), High - .535" STOCK # MODEL FINISH PRICE — Advise # — JR MB Base 5E25B45...... 29.99 (13.6mm). Extra High - .782" (19.9mm). Fits Picatinny bases. short action Savage 10 rifles with AccuTrigger. ab #601-910-122AK Rimfire 1" MB 1K08A46 $ 9.99 #524-000-001AK Low Tactical Rings 4B00AVB . . $ 165.00 SPECS: 4140 steel, blued, matte finish. Bases include attachment #524-000-002AK Medium Tactical Rings, screws. 30mm Rings sold in pairs only. Heights measured from #601-910-322AK Rimfire 30mm MB 1K08A46 $ 9.99 4B00HDZ...... 165.00 top of base to inside bottom of ring: .395" (10mm). #601-910-100AK Weaver 1" GB 1K08A46 $ 9.99 GunsmithSupplies.com #524-000-003AK High Tactical Rings, #100-001-318AK AccuTrigger SA Base 1K83Y00. . $ 109.00 #601-000-047AK Weaver 1" MB 1K08A46 $ 9.99 4B00YTP...... 165.00 #556-110-700AK Rem. 700 LA Base 1K76C91. . . . 101.51 Create personalized printed business #601-910-300AK Weaver 30mm GB 1K08A46 $ 9.99 #524-000-017AK Extra High Tactical Rings, #556-110-701AK Rem. 700 SA Base 1K76C40. . . . 101.45 materials with your business or shop name 4B00HDZ...... 165.00 #556-130-302AK 30mm Standard Rings 1K101A05. .134.75 #601-000-046AK Weaver 30mm MB 1K08A46 $ 9.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 256 SINCE 1939 Office/Tech: 641-623-5401 REDFIELD SPLIT RINGS REDFIELD S&K NO-DRILL, NO-TAP SCOPE MOUNT Proven Strength, EXTENSION RING SET Easily Add A Scope To Bolt & Gracefully Scupltured Accepts scopes with 1" (2.5cm) O.D. tubes. Heights shown are Semi-Auto, Military & Sporters Cures Mounting Problems from top of base to inside bottom of ring: Med. - .272" (6.9mm). rings & bases For Great Looks High - .402" (10.2mm). Direct, bolt-on installation; no To take care of the scope drilling and tapping required. Beautiful, Streamlined Split mounting problems with short STOCK # EXTENSION/HEIGHT PRICE Rings, precision-made of hard- Replace the original, open sights or long stocks. Gives .660" #750-522-608AK 1" Std. Rear, Ext. Frt/Med. 5E42P22 $ 48.99 with the S&K Mount; install your ened steel. Rotary dovetail engineering to .0004", guaranteed (16.8mm) greater forward or not to shoot loose on any rifle fired from the shoulder. #750-522-613AK 1" Std. Rear, Ext. Frt/High 5E42P22 $ 48.99 favorite scope with a set of Weav- rearward ring placement. er-style rings and go shooting. SPECS: Sold in pairs. Available Polished Blue (PB), Matte Blue (MB) SPECS: Steel, polished blue. #750-522-618AK 1" Ext. Rear, Ext. Frt/Med. 5E54P62 $ 63.99 or Matte Nickel (MN). Heights measured from top of base to inside This is the easiest, quickest way bottom of ring. METRIC: 1" (2.54cm). we’ve seen to get smaller groups from these guns without mak- ® ing modifications that could hurt the resale or collector value. STOCK # DIA./HEIGHT FINISH PRICE RUGER FACTORY SCOPE RINGS Precision-machined and finished in a matte black that doesn’t #750-522-630AK 1" Low .150" PB 5E28P67 $ 33.99 For Precise, Solid Scope Mounting On Ruger Rifles & Handguns reflect light. Blends in well with the original military finishes. #750-522-415AK 1" Low .150" MB 5E30P78 $ 35.99 The only way to go when scoping those extra-hard, stainless High-quality Ruger factory rings install easily and provide solid, zero-movement scope attachment to Ruger #750-522-635AK 1" Medium .270" PB 5E28P67 $ 33.99 Mini-14s. Models with No rings feature a Weaver-style base; rifles and handguns with integral bases, No. 1 rifles with factory base, and No. 3 rifles with special factory bases supplied without rings. ab #750-522-688AK 1" Medium .270" MB 5E30B78 $ 35.99 available below. Low, Medium, High, and Extra-High heights in blued carbon steel, natural stainless steel, or SPECS: Base - Aluminum, black, matte, anodized or powder coat- ® #750-522-639AK 1" High .400" PB 5E28P67 $ 33.99 stainless with Ruger’s proprietary matte Target Grey finish. ed. Sizes vary. S&K 1" Rings - Steel, black, matte finish. Height: .140" ® #750-522-648AK 1" High .400" MB 5E30P78 $ 35.99 SPECS: Carbon steel, polished blue finish (BL), stainless steel, natural (SS), or Target Grey (TG) finish. Ring heights (3.6mm) top of base to bottom of ring. Fits - No. 1 Mk III Lee Enfield, measured from top of base to bottom of scope tube. Low - .325". Medium (Med.) - .435". High - .565". Extra-High #750-522-700AK 1" Super-Hi .500" PB 5E30B78 $ 35.99 also includes instructions to fit Ishapore, .308 cal. rifles. Mini-14 will (X-High) - .680". Offset Ring available in Medium height only. Use two to move scope eye relief back 1". To move the scope ½" to the not fit Ranch or Mini-30. Mosin Nagant M44 and Schmidt-Rubin #750-522-708AK 1" Super-Hi .500" MB 5E32B90 $ 38.99 rear, use one Offset ring and one #834-000-003 Medium height ring. K31 replace rear sight, use long eye relief pistol or scout scopes, #750-523-700AK 30mm/Med. .312" MB 5E48B57 $ 56.99 RINGS FOR: No. 1, No. 3, Mark II Pistol, 77/22®, 77/22® Mag., Mini-14® Ranch Rifle, Mini-Thirty®, Redhawk® or dot sights. #750-523-702AK 30mm/High .490" PB 5E46B43 $ 53.99 Available as single rings only. Order two (2) of the same ring for these firearm models. STOCK# FITS RINGS PRICE #750-523-722AK 30mm/High .490" MB 5E47B71 $ 55.99 1" RINGS 30mm RINGS #794-001-014AK Mini-14 181 Series No 4G66Z69 $ 95.99 STOCK # (order TWO) RUGER PART# HEIGHT FINISH STOCK # (order TWO) RUGER PART# HEIGHT FINISH #794-000-002AK Mini-14 180 Series No 4G48Z09 $ 69.99 REDFIELD SR 2-PIECE BASE SET #834-000-002AK 3B Low BL #834-008-001AK 4B30 Med. BL #794-001-114AK M1A/M14 No 4G57Z54 $ 82.20 #834-000-005AK 3K Low SS #780-001-253AK 4K30 Med. SS #794-001-130AK M1 Carbine No 4G43Z12 $ 61.99 Two-piece steel for less weight, easier access to load- #780-001-250AK 3KTG Low TG #834-008-002AK 5B30 High BL #794-001-100AK M1 Garand No 4G70Z70 $ 101.00 ing port. Available for popu- #834-000-003AK 4B Med. BL #834-008-007AK 6B30 X-High BL #794-000-011AK Mosin Nagant M44 No 4G48Z30 $ 69.00 lar rifles. #834-000-006AK 4K Med. SS — Adivse # — Blue Scope Ring, each, #794-001-111AK No. 1 Mk III Lee Enf. No 4G55Z30 $ 79.00 SPECS: Steel. Polished Blue #834-003-001AK 4KHM Med. Matte SS 8G25Y84...... $ 34.00 #794-001-045AK 4 and 5 Lee Enfield No 4G45Z97 $ 66.99 (PB) or Matte Blue (MB). Long #780-001-248AK 4KTG Med. TG — Adivse # — SS & Target Grey Scope Ring, each, #794-001-017AK 1917 Enfield No 4G43Z83 $ 62.99 Action (LA), Short Action (SA). 8G30Y78...... 40.50 #794-000-007AK Schmidt Rubin K 31 S&K STOCK # FINISH (MODEL) FITS #834-000-072AK 4BO Med. Offset BL #834-004-124AK SC-24 Scope Bases for No. 3 Rifle, Blued, 4G55Z30 $ 79.00 #750-512-018AK PB (SR-153) Anschutz 54, 64, 153, 1400, 1600 #834-000-004AK 5B High BL 8G15Y18...... 18.98 03A3 MOUNT - No need to drill #780-004-125AK SC-24VA-A Scope Bases for No. 1V Rifle, and tap a rock-hard Springfield #750-512-203AK PB (SR-70A) Browning BBR #834-000-007AK 5K High SS #780-001-249AK 5KTG High TG Blued 8G30P13...... 37.66 with this No-Drill, No-Tap #750-512-209AK PB (SR-700) BSA Monarch LA/SA Mount. No need to bend the Round Receiver #834-003-002AK 6B X-High BL bolt, a simple grinding of the #750-512-209AK PB (SR-700) Churchill LA/SA #834-000-008AK 6K X-High SS Selection • Service • Satisfaction bolt handle for clearance is all #750-512-203AK PB (SR-70A) Sears, J.C. Higgins 53 #780-001-251AK 6KTG X-High TG that’s needed. Blends in well with original finish. SPECS: Alum., black, anodized. Uses standard Weaver-style 1" #750-512-011AK PB (SR-FN) Mauser FN 5 RINGS FOR: M77®, M77 Mark II & Super Redhawk® (2.5cm) rings, not supplied. Wt. 3 oz. (85 g). 5 ⁄16" (13.5cm) long. #750-512-209AK PB (SR-700) Mossberg 1500, 1700 LA/SA #794-001-033AK S&K 03A3 Springfield Mount, #750-512-209AK PB (SR-700) Rem. 700 LA/SA These models require front and rear scope rings of different heights. On M77/M77 Mark II, the shorter ring always mounts at the 4G55Z34...... $ 79.99 40X ,78, 722, 725 front of the receiver and the higher ring at the rear. On the Super Redhawk, the higher ring is always at the front of the frame and the lower ring at the rear. U.S. KRAG MOUNT - Easily in- #750-532-209AK MB (SR-700) Rem. 700 LA/SA stalled with no drilling or tapping 40X ,78, 722, 725 Available as single rings only. Order one (1) FRONT and one (1) REAR ring from table below. required. High tensile strength al- #750-512-209AK PB (SR-700) Ruger® M77® Round Receiver, LA 1" RINGS loy base furnished with streamlined, #750-512-216AK PB (SR-SDT) Sako Tapered Dovetail STOCK # FRONT RUGER PART# FRONT STOCK # REAR RUGER PART # REAR HEIGHT FINISH S&K horizontally split rings. #750-512-209AK PB (SR-700) S&W 1500, 1600 & 1700 SPECS: Aluminum base, anodized black, matte. Steel rings, blue #834-000-002AK 3B #834-000-003AK 4B Low/Med. BL matte finish. Steel clamp screws. #750-512-209AK PB (SR-700) Weatherby Vanguard #834-000-005AK 3K #834-000-006AK 4K Low/Med. SS #794-001-098AK S&K Krag Base 4G77Z25 . . . . .$ 110.99 #750-512-203AK PB (SR-70A) Win. 70, 70XTR, 670, 770, Ranger #780-001-250AK 3KTG #780-001-248AK 4KTG Low/Med. TG MOSIN NAGANT MOUNT - No drilling, tapping — Advise # — PB SR Bases, pair 5E27Z07 . . . . $ 31.99 #834-000-003AK 4B #834-000-004AK 5B Med./High BL or bolt modifications. Aluminum base replaces — Advise # — MB SR Bases, pair 5E25B45. . . . .29.99 #834-000-006AK 4K #834-000-007AK 5K Med./High SS the rear sight, and accepts a long eye relief, scout #780-001-248AK 4KTG #780-001-249AK 5KTG Med./High TG or handgun scope. Includes S&K, horizontally ® split steel rings. REDFIELD STEEL RUGER RINGS #834-000-072AK 4BO #834-000-004AK 5B Med. Offset/High BL SPECS: Mount - Aluminum, anodized, black, matte Smooth Contours For Great Looks #834-000-004AK 5B #834-003-002AK 6B High/X-High BL finish. 1" Rings - Steel, blue, matte finish. M91 fits M91/30 and Windage adjustable rings to fit directly onto #834-000-007AK 5K #834-000-008AK 6K High/X-High SS M91/59. M44 fits M44 Carbine. Ruger integral bases. #780-001-249AK 5KTG #780-001-251AK 6KTG High/X-High TG #794-000-004AK M91 Mosin Nagant Mnt 4G55Z86. . $ 79.99 SPECS: Available Polished (PB), or Matte (MB) Blue #794-000-005AK M44 Mosin Nagant Mnt 4G55Z30. . . . 79.00 30mm RINGS or Matte Nickel (MN). S&K 96 & 98 MAUSER - Tough, light alumi- STOCK # SIZE/FIN./HGHT. FITS STOCK # FRONT RUGER PART# FRONT STOCK # REAR RUGER PART # REAR HEIGHT FINISH num mount clamps securely to receiver; no #750-522-805AK 1", PB, med. M77® - 1.9" to 2.2" dia. objective #834-008-001AK 4B30 #834-008-002AK 5B30 Med./High BL drilling or tapping required. Fits bent bolt models only, others will require bolt modifi- #750-522-810AK 1", PB, high M77 - 2.2" to 2.5" dia. objective — Advise # — Blue Scope Ring, each 8G25Y84...... $ 34.00 — Advise # — SS & Target Grey Scope Ring, each 8G30Y78...... 40.50 cation. Includes S&K rings. Requires minor #750-522-809AK 1", MB, high M77 - 2.2" to 2.5" dia. objective stock modification. 98 Mauser ® #750-522-820AK 30mm, MB, high M77 - up to 56mm objective RUGER 10/22 SCOPE BASE ADAPTER - Mounts to the top of the 10/22 receiver and allows the 10/22 to accept SPECS: Mount - Aluminum, anodized, black, any ring designed for .22 rifles with dovetailed receivers. 1 — Advise # — 1" PB Ruger Rings 5E42B19. . . . $ 48.99 matte finish. 5 ⁄4" (13.3cm) long. 1" Rings - Steel, blue, matte finish. — Advise # — 1" MB Ruger Rings 5E46B43. . . . . 53.99 #780-004-222AK 10/22 Scope Base Adapter, #794-000-003AK S&K 98 Mauser Mount 4G83Z85. $ 119.99 — Advise # — 30mm MB Ruger Rings 5E54B91. . . 63.99 8G08P72...... $ 10.99 #794-000-006AK S&K 96 Mauser Mount 4G83Z02. . . 118.60 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 257 S&K SCULPTURED MOUNTS & REMINGTON REM 700 INTEGRAL SCOPE TACTICAL PRECISION TALLEY THOMPSON CENTER KONTOURED RINGS MOUNT HRT™ RINGS ENCORE RINGS & Almost-Invisible Rings, Fast, Easy, Custom-Fit Superior Scope-To-Ring Contact BASE Plus Light, Cutaway Bases Scope Mounting; With A Slim-Line Look Lightweight, Durable & Practical One of the slickest, smooth- No Drilling Or Tapping Precision, CNC-machined, tactical rings offer One-piece ring and base elimi- est ring/base combinations ever. superior holding power in a smooth, contoured Lightweight 1" rings with in- nates the joint between the ring and base to provide a rigid The ring is split, vertically, at the design for light weight and minimum bulk. Made from 7075 tegral bases are custom made for mounting platform that reduces ring alignment problems and mounting post with absolutely no aluminum billet or extra strong, 1215 steel alloy. Guaranteed, Remington 700 rifles to provide prevents kinking a scope. Surprisingly lightweight yet durable, screws or even any “lumps,” just .0002" cylindrical roundness between ring base and top strap en- fast, easy scope mounting with precise centering and error- machined from high-grade aluminum, these rings won’t add a wrap it around the scope, squeeze sures excellent tube-to-ring contact; prevents scope tube “pinch” free alignment. Made of advanced Z2 alloy, similar in weight to lot of extra weight that can bog you down at the range or in the together and slip the post into the S&K base. Dual opposed, coni- ® and eliminates the need to lap prior to scope mounting. Steel aluminum but 50% stronger. Hardened steel Torx head screws field. Accepts 1" diameter scope tubes. ab rings & bases cal screws serve as ring clamp screws, and also provide windage retain top ring half and clamp base to factory receiver holes. alloy, cross-bolt and hex nut gives positive locking on Picatinny ® SPECS: Extruded, CNC machined 7000 series aluminum, black. and alignment adjustments. Sculptured bases give a “finished” and Weaver-style bases. Four, Torx head screws prevent scope Reversible to allow different ring spacing for mounting anything Fits scopes with 1" diameter tubes. Low - fits scopes up to 44 mm look and save weight. ab shift under the heaviest recoil. Sold in pairs. ab from extra long varmint/target scopes to short, compact optics. objective with standard barrel contour. Medium - fits scopes up to SPECS: Steel, blue, matte finish. Bases (Rem 700) weigh 2.1 oz SPECS: 1215 steel alloy or 7075-T651 aluminum, matte black. Base provides 100% metal-to-metal contact with the receiver for 50 mm objective with standard barrel contour. High - fits scopes (59.5 g), Rings, 1" or 30mm, 1.1 oz (31 g). Approximate ring height Height measured from top of base to center of ring. 1" - Medi- recoil-proof holding power with no loss of zero. with a 56 mm objective with standard barrel contour. Ex-High - fits from top of base to center of ring. 1" Low - .642" (16.3mm). 1" High um: .985" (25mm). High: 1.185" (30mm). 30mm - Medium: 1.075" SPECS: Z2 alloy, powdercoat finish, matte black. Accepts 1" dia. large objective scopes with heavy contour barrels and single shot - .778" (19.7mm). 30mm Low - .732" (18.6mm), 30mm High - .950" (27.3mm). High: 1.225" (31.1mm). Fits Picatinny and Weaver-style scopes. Height measured from top of receiver to bottom of scope rifles. Four mounting screws and Allen wrench included. (24.1mm). Rings and bases available in pairs only. mounts. - .70" (1.7cm). Fits long and short action Remington 700. #874-000-089AK TC Encore Rings & Base, Low, STOCK # FITS #768-194-250AK Integral Scope Mount 8F25A26 . . $ 31.99 STOCK # SIZE MATERIAL HGT PRICE 4G48Y57...... $ 57.95 #794-525-098AK Mauser 98, military & comm., 1.4" dia. #100-001-474AK 1" Steel Medium 9K72T00 $ 79.99 #874-000-090AK TC Encore Rings & Base, Medium, #794-525-096AK Mauser 96, small ring, 1.2" dia. #100-001-475AK 1" Steel High 9K72T00 $ 79.99 4G48Y57...... 57.95 TACTICAL PRECISION #874-000-091AK TC Encore Rings & Base, High, #794-525-700AK Remington 700/721/722/725 long & short #100-001-476AK 1" Alum Medium 9K63T00 $ 69.99 ™ 4G48Y57...... 57.95 #794-525-070AK Winchester 70 std, 670, 770 TSR & TSR "W" RINGS #100-001-477AK 1" Alum High 9K72T00 $ 79.99 #874-000-092AK TC Encore Rings & Base, Extra High, — Advise # — Sculptured Mount Base, Super Holding Power, #100-001-478AK 30mm Steel Medium 9K83T05 $ 89.99 4G48Y57...... 57.95 4G32X55...... $ 46.50 Precision Alignment #100-001-479AK 30mm Steel High 9K79T99 $ 89.99 #794-500-100AK Low 1" Kontoured Rings, #100-001-480AK 30mm Alum Medium 9K71T31 $ 76.99 /WARNE 4G40Z46...... 57.99 Rugged tactical rings are precision ma- Brownells #794-500-102AK High 1" Kontoured Rings, chined to tolerances of .0002" for maxi- #100-001-481AK 30mm Alum High 9K72T00 $ 79.99 7.3 SERIES RINGS & BASES 4G44Z66...... 63.80 mum scope/ring contact to hold scope se- #794-000-001AK Low 30mm Kontoured Rings, curely against recoil. Four-screw cap lets Smooth Profile, Horizontal Split; 4G55Z30...... 79.00 you align the reticle, tighten the left side TALLEY TACTICAL SCOPE RINGS For Centerfire & Rimfire of the cap, then the right side without the #794-500-030AK High 30mm Kontoured Rings, Billet Machined For Strength; 4G55Z30...... 79.00 scope rotating. Large clamp-nut lets you torque ring to base. Unique, double-duty 1" rings feature a remov- Radiused edges and corners help prevent snagging while provid- Dual Recoil Lugs Stay Put able recoil lug that lets them fit Warne Premier bases and .22 rimfire rifles. Four screws evenly draw the cap onto the base and ing attractive appearance. TSR - 7075-T6 aluminum, fits MIL- Heavy-duty scope rings are precision- SMITH ENTERPRISE keep the scope from rotating as you tighten the cap. Reversible STD 1913 Picatinny base. TSR "W" Series - 1215 alloy steel, fits machined from solid billet aluminum Weaver bases. 34mm - Accepts Schmidt & Bender-type 34mm clamp, with 60° dovetail, provides optimum fit to base or nominal with dual recoil lugs to ensure your tacti- 3 TACTICAL RINGS scope tubes. ab ⁄8" dovetail. ab 5 cal scope won’t budge under the heaviest Rugged, High-Strength Steel; SPECS: ⁄8" (15.8mm) wide. Heights measured from top of base to recoil. Full-width ring caps are cut from SPECS: Steel, powder coated, black, gloss or matte finish. Height center of ring. TSR - 7075-T6 Aluminum black, hard anodized to Mil- measured from top of base to inside, bottom of ring. 1" - Low: Securely Holds the same billet as the bottom half of the 3 .325" (8.2mm). Fits ⁄8" dovetail only; must be modified to fit 11mm Heavy Tactical Scopes A-8625 standards. TSR "W" Series - 1215 alloy steel, Mil-C-13924 ring for precise fit and held in place with four stainless steel oxide finish, matte black. 1" - Low: .785" (19.9mm). Medium: .985" Allen head screws that won’t work loose when properly tight- dovetail. Med: .425" (10.8mm). High: .550" (14mm). Ex. High: .715" Extra-strong, machined from solid bar stock; keeps the heavi- (25mm). High: 1.185" (30mm). 30mm - Low: .925" (23.5mm). Me- ened. Matching serial numbers ensure you always mate the cap (18mm). est 30mm scopes from moving under recoil. Heavy-duty, U.S.- dium: 1.075" (27.3mm). High: 1.225" (31.1mm). 34mm - Medium: with the bottom it came with. Locking bar, heavy-duty crossbolt STOCK# DIA/HEIGHT FINISH PRICE size hex nuts allow you to correctly torque rings to base. Uses 1.185" (30.1mm). and oversized, ½" hex nut locks the ring to any MIL-STD 1913 #947-000-076AK 1"/Low Matte 7D32P56 $ 39.99 oversized, square cross lugs for increased contact on Picatinny TSR ALUMINUM RINGS Picatinny rail. Hard-anodized for extra surface strength, with a #947-000-077AK 1"/Low Gloss 7D32P56 $ 39.99 bases; provides additional security against ring slippage and non-reflective matte black finish. Engraved front and back with wear caused by recoil battering. Each cap features four, socket- STOCK # HEIGHT SIZE PRICE the distinctive Talley cross-bones logo. #947-000-078AK 1"/Med Matte 7D32P56 $ 39.99 head screws that positively lock scope into rings. ab #100-000-951AK Low 1" 9K63X51 $ 74.99 SPECS: 7075 T6 aluminum, hardcoat anodized, matte black, with #947-000-079AK 1"/Med Gloss 7D32P56 $ 39.99 SPECS: 4140 steel billet, Parkerized, matte finish. Rc 35. Fits 30mm #100-000-952AK Med 1" 9K63X51 $ 74.99 303 stainless steel screws, black finish. 1.9" (5cm) wide, .665" #947-000-080AK 1"/High Matte 7D32P56 $ 39.99 dia. scope tubes. .500" (12.7mm) high from top of base to inside #100-000-953AK High 1" 9K67X51 $ 78.99 (16.8mm) thick. Models available for 1" (2.5cm) or 30mm O.D. #947-000-081AK 1"/High Gloss 7D32P56 $ 39.99 bottom of ring. scope tubes. Heights measured from top of base to center of ring: ##851-000-054AK 7018 Tactical Rings 1E120A00. . 150.00 #100-000-957AK Low 30mm 9K69X99 $ 81.99 Low - 1" (2.5cm); Medium - 1.125" (2.8cm); High - 1.275 (3.2cm). #947-000-082AK 1"/Ex High Matte 7D32P56 $ 39.99 #100-000-958AK Med 30mm 7003 BMG RINGS - Six cap screws 9K68X51 $ 79.99 7. 3 SERIES BASES - Heavy-duty ma- 1 STOCK# 1" STOCK# 30mm HEIGHT and double clamp bolts with ⁄2" #100-000-959AK High 30mm 9K71X51 $ 79.99 chined steel bases feature a heavy recoil #874-000-112AK #874-000-115AK Low shoulder to provide a solid, low-profile, ze- nuts, solidly lock scope, rings and TSR “W” SERIES STEEL RINGS base into one unit. Prevents large #874-000-113AK #874-000-116AK Medium ro-movement mount for Brownells/Warne objective 30mm scopes from slip- STOCK # HEIGHT SIZE PRICE #874-000-114AK #874-000-117AK High 7.3 Series Rings. Low profile has minimal ping under recoil on .50 BMG rifles. #100-001-403AK Low 1" 9K71T51 $ 79.99 bulk and maintains a sleek appearance. – Advise # – Tactical Scope Rings 4G176Y80. . . $ 210.95 Fast, easy installation; mounting instructions included. Povides clearance for 56mm objec- #100-001-404AK Med 1" 9K72T51 $ 79.99 tive scopes. Square cross bolts provide secure, ring-to-base con- SPECS: Steel, blued, matte finish. Includes mounting screws. #100-001-405AK High 1" 9K75T00 $ 79.99 tact with excellent return to zero. Wire EDM cut from bar stock Accepts Brownells/Warne 7.3 rings, or any rings designed to fit TALLEY 3 and stress relieved. Fits Picatinny rails only. #100-001-409AK Low 30mm 9K79T99 $ 89.99 nominal ⁄8" (11mm) dovetail. SPECS: 4140 steel, parkerized, matte finish. Rc 35. Fits 30mm #100-001-410AK Med 30mm 9K79T99 $ 89.99 #947-000-254AK 7.3 Base, Mauser 98 7D18U57. . . $ t21.99 RIMFIRE SCOPE RINGS #947-000-248AK 7.3 Base, Rem. 700 7D18U57. . . . .21.99 dia. scope tubes. .685" (17.4mm) high from top of base to inside #100-001-411AK High 30mm 9K83T49 $ 94.99 bottom of ring. Provide Precise Fit To Receiver #947-000-249AK 7.3 Base, Win. 70 7D18U57...... 21.99 #100-003-300AK Med 34mm 9K109A99 $ 126.99 #851-000-034AK 7003 BMG Rings 1E206A66 . . . $ 258.99 Machined from steel bar stock to provide a strong mounting system with a smooth profile. Precision cut STOCK # FITS PRICE dovetails have the correct angle for an #874-000-008AK Anschutz rings, Low 4G44T38 $ 52.95 WOULD YOU LIKE TO MEET LEGENDS IN THE FIREARMS INDUSTRY? exact fit. Torx® clamp screws snug down tightly for maximum #874-000-084AK Anschutz rings, High 4G44Y38 $ 52.95 Learn more about our annual Gunsmith Conference and Career Fair at holding power. ab #874-000-009AK CZ .22 Rimfire rings, Low 4G44T38 $ 52.95 SPECS: Steel, blue, satin finish. Accept 1" scopes. Height from top www.gunsmithcareerfair.com to find out about the networking opportunities! of base to bottom of ring: Low - 313" (8mm). High - .600" (15.2mm). #874-000-109AK CZ .22 Rimfire rings, High 4G44Y38 $ 52.95 Sold in pairs. #874-000-010AK CZ .22 Hornet rings, Low 4G69T52 $ 82.95 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 258 SINCE 1939 Office/Tech: 641-623-5401 TALLEY WARNE MAXIMA 2-PIECE BASE SETS SCOPE RINGS & BASES Weaver-Style In Steel

Fixed Or Quick Detach Models Anchor Solidly To Shouldered Bases; Provides A Clean, Uniform Look Smooth, solid steel two-piece bases provide an extra strong mount system. Accept Warne Maxima rings rings & bases or any Weaver-style ring. Three finishes. ab Beautifully machined from solid, steel or stainless steel bar stock to form a rock-solid scope SPECS: 12L14 steel. Available in polished blue, matte blue, or silver. Two-piece only, Includes mounting mounting system that looks as good as it functions. Vertically-split ring design with dual screws screws. Do not mix Maxima bases with other brands of Weaver-style base, the heights are often different. provides maximum holding power for scopes with 1" or 30mm diameter tubes. Rings lock securely RHS = Rear Hole Spacing. into unique, dovetail bases featuring a double shoulder that completely prevents any movement, and counters the heaviest recoil. Together, they create a clean, contoured appearance on any STK # POLISHED STK# MATTE STK# SILVER FITS sporting rifle. ba #947-000-153AK #947-000-154AK NA Anschutz (All); Marlin A1, 50 QUICK DETACH RINGS - Include precision machined, QD levers for fast, easy scope installation #947-000-155AK #947-000-156AK #947-000-209AK Browning A-Bolt .22, Micro-Medallion; Steyr SBS and removal, plus button-head screws for optional fixed ring application if desired. #947-000-159AK #947-000-160AK #947-000-211AK Browning BAR, BAR II, Mark II, BLR Lightning, BPR, T-Bolt; Colt Coltsman, SPECS: Steel, blue, satin finish or stainless steel (SS), natural finish. Models available for 1" or 30mm 264 & 30-06 Round Top (Enfield/Rem 30 style); Marlin Camp 9 & 45; Rem 30 diameter scope tubes. Ring heights measured from top of base to bottom of ring. Low - .300" (7.62mm). Medium - .400" (10.16mm). & 720; Sav 40 & 45; Win SXR High - .500" (12.7mm). X High - .600" (15.2mm). Fit Talley bases only. Available in pairs. #947-000-161AK #947-000-162AK NA Browning BLR (steel receiver); Colt 223, 243 & 308 Round Top; Sauer SHR STOCK # SIZE HEIGHT FINISH PRICE Pro Hunter #874-025-101AK 1" Low Blue 4G96T34 $ 115.99 NA #947-000-244AK NA Kimber 84 #874-000-104AK 1" Low SS 4G98Y86 $ 117.95 NA #947-000-245AK NA Kimber 8400 #874-025-102AK 1" Medium Blue 4G96T34 $ 118.99 #947-000-165AK #947-000-166AK NA Knight Disc/Revolution; Mossberg 680, 695, 800, 50, 51, 151, 350, 351, 352; #874-025-103AK 1" High Blue 4G94T66 $ 115.95 Rem 541-T, 541-S; Western Field 775, 780 #874-025-104AK 1" X High Blue 4G98T86 $ 117.95 #947-000-167AK #947-000-168AK #947-000-215AK Marlin 9, 45, 30AS, 36, 62, 93, 336, 336C, 375, 1893, 1894 Cowboy, 1895, 444; Glenfield 30, Zane Grey, 989, 22 Auto (.500” hole spacing) #874-025-301AK 30mm Low Blue 4G98T86 $ 117.95 #947-000-169AK #947-000-170AK NA Mauser 98 altered; Mauser FN (military model); Charles Daly; CIL 972; #874-025-302AK 30mm Medium Blue 4G98T86 $ 117.95 Colt 57; H&R (pre 1973) 300, 301, 330, 370; Interarms Mark X & Viscount; #874-025-303AK 30mm High Blue 4G98T86 $ 117.95 Marlin 455; Musgrave MK III & IV; Parker Hale 1000, 1000C, 1100, 1200, 1700; #874-000-080AK 30mm X High Blue 4G98Y86 $ 117.95 Rem 798; Voere 2150, 2165-1, 2165-2, 2165-3, 2165-4 #947-000-171AK #947-000-172AK NA Mauser 98 unaltered FIXED SCOPE RINGS - include low-profile, button-head Torx® screws for mounting applications where #947-000-173AK #947-000-174AK NA Mauser Small Ring 96 altered; High Standard High Power; Herters J-9; permanent scope mounting is preferred. Husqvarna HVA Small Ring; HVA 1600 & 1900; Mauser Small Ring G33-40; (SS) SPECS: Steel, blue, satin finish or stainless steel , natural finish. Models available for 1" or 30mm diameter Sears 511 scope tubes. Ring heights measured from top of base to bottom of ring. Low - .300" (7.62mm). Medium - .400" (10.16mm). High - .500" (12.7mm). X High - .600" (15.2mm). Fit Talley bases only. Available in pairs. #947-000-175AK #947-000-176AK NA Mauser Small Ring 96 unaltered #947-000-177AK #947-000-178AK #947-000-220AK Rem 700, 78, 721, 722, 725, 700 Muzzle Loader; BSA Monarch; Churchill Highlander; Herters U-9 Round Top; Howa 1500 & 1700; Mossberg 1500 & 1700; Raptor Arms long action; S&W 1500, 1600, 1700; Weatherby Vanguard STOCK # SIZE HEIGHT FINISH PRICE #947-000-179AK #947-000-180AK NA Rem New Mdl Seven, 600, 660, 670, 673, XP-100 #874-000-001AK 1" Low Blue 4G61T14 $ 72.95 NA #947-000-182AK NA Benelli Black Eagle, Super Black Eagle Shotgun; Rem 7400, 7600, 76, 74, #874-000-106AK 1" Low SS 4G98Y02 $ 116.95 FOUR, SIX, New 750 #874-000-002AK 1" Medium Blue 4G61T14 $ 72.95 #947-000-183AK #947-000-151AK NA Charles Daly Mini Mauser; Interarms Mk X Mini Mauser, Rem 799 #874-000-107AK 1" Medium SS 4G98Y02 $ 116.95 NA #947-000-185AK NA Ruger® 10/22® .22LR #874-000-003AK 1" High Blue 4G61T14 $ 72.95 #947-000-186AK NA NA Sauer 90, 200 #874-000-005AK 30mm Low Blue 4G61T14 $ 72.95 #947-000-188AK #947-000-189AK NA Sauer 202 #874-000-006AK 30mm Medium Blue 4G61T14 $ 72.95 NA #947-000-191AK NA Savage pre-2003 bolt action flat receiver #874-000-007AK 30mm High Blue 4G61T14 $ 72.95 #947-000-192AK #947-000-193AK #947-000-227AK Savage Accu-Trigger; Carl Gustav 2000; Navy Arms Country Boy Muzzle #874-000-081AK 30mm X High Blue 4G61Y14 $ 72.95 Loader; All Center Fire; Shilen Round Receiver; Stevens 200; Win 88 & 100 #947-000-194AK NA NA Steyr Mannlicher L & LS SCOPE RING BASES - Feature Talley’s proven, machined saddle design with double recoil shoulders to completely immobilize the rings under heavy recoil. Bases accept both Fixed and QD Talley rings. #947-000-196AK #947-000-197AK NA Steyr Mannlicher M & MS SPECS: Steel, blue, satin finish or stainless steel (SS), natural finish. Available in pairs. Accept Talley Fixed NA #947-000-199AK NA Weatherby Mark V Standard & .240WM or QD rings only. #947-000-200AK #947-000-201AK NA Weatherby Mark V Magnum #947-000-202AK #947-000-203AK #947-000-232AK Win 670, 770, Win 70 Std. Pre & Post 64 with .860 RHS, WSM; STOCK # FITS HOLE SPACING FINISH PRICE Enfield Win 70-style; Kimber M89 BGR; Montana #874-000-017AK Browning A-Bolt (except Titanium model) - Blue 4G25T10 $ 29.95 NA #947-000-205AK #947-000-233AK Win 70 Post 64 Magnum .330 RHS #874-026-098AK Mauser 98 - Blue 4G25T10 $ 29.95 NA #947-000-207AK NA Win 70 WSSM #874-026-701AK Rem. 700, 721, 722, 725, 40X/Howa - Blue 4G25T10 $ 29.95 — Advise # — Maxima Base Set, Polished Blue or Matte Blue 7D18U57...... $ 21.99 #874-000-105AK Rem. 700, 721, 722, 725, 40X/Howa - SS 4G37Y67 $ 44.95 — Advise # — Maxima Base Set, Silver 7D20U83...... 24.99 #874-000-021AK Rem. 700 Extension front/std rear - Blue 4G37V67 $ 44.95 #874-000-075AK Sako Long, L61R, L691, M995, IV, V - Blue 4G37Y67 $ 44.95 WARNE MAGNUM SPECIAL #874-000-077AK Sako Short, L461, L579, S491, M591, I, II, III - Blue 4G37Y67 $ 44.95 correct height for flattop AR‑15 and H&K SL7 rifle. ab #874-000-097AK Savage Accutrigger Std. - Blue 4G25Y10 $ 29.95 APPLICATION MAXIMA RINGS SPECS: Steel, matte blue. Height measured from top of base to #874-000-079AK Thompson Center Encore - Blue 4G37Y67 $ 44.95 Rugged Steel, Close-Tolerance bottom of ring saddle. QD: 1" (2.5cm): X-High - .650" (16.5mm) and #874-026-010AK Weatherby Mk V 9-lug bolt - Blue 4G24T26 $ 26.99 Dovetails For Secure Mounting Ultra-High - .935" (23.7mm); 30mm (1.18"): X-High -.650" and Ultra- High - .850" (21.6mm). Perm: 1" X-High - .650" and 30mm X-High #874-026-070AK Win. 70, all except Magnums .860" Blue 4G25T10 $ 29.95 Vertically split rings, precision- - .650". All models fit Warne Maxima, Weaver, and Picatinny bases. #874-026-071AK Win. 70, Pre ‘64 .300 & .375 Mag. .435" Blue 4G25T10 $ 29.95 machined from steel barstock, hold STOCK # DIA/HEIGHT HEIGHT PRICE #874-026-072AK Win. 70, Post ‘64 .300 & .375 Mag. .330" Blue 4G25T10 $ 29.95 large objective, heavy scopes firmly #947-000-003AK 1"/X-High Perm 7D46P19 $ 57.99 against recoil. Finished to exacting tolerances so the scope returns to zero, #947-000-004AK 1"/X-High QD 7D67P17 $ 83.99 Stock numbers shown in red indicate the product is made in the U.S.A. even after repeated dismounting and remounting. Permanent #947-000-005AK 1"/Ultra High QD 7D67P17 $ 83.99 mount (Perm) uses two socket screws to solidly lock rings to #947-000-008AK 30mm/X-High Perm 7D46P19 $ 55.99 This information is not available for all products at time of catalog production, but will be regularly base. Quick detach (QD), double lever rings clamp quickly and #947-000-009AK 30mm/X-High QD ab updated on our website. tightly; dismount instantly when you lift the lever. Levers can be 7D79P04 $ 95.99 repositioned so both rest at the same angle. Ultra High rings give #947-000-010AK 30mm/Ultra High QD 7D78P94 $ 95.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 259 TALLEY WARNE WARNE WARNE LIGHTWEIGHT SCOPE MOUNT 7.3/.22 RINGS MAXIMA RINGS MAXIMA TPA RINGS When Every Smooth Profile, Horizontal Split; Strong, All-Steel With Adjustable Levers; Rock Solid Mounting; Ounce Counts; Fit A Wide Variety Of Rimfire Rifles Fit Weaver-Style Bases Smooth, Snag-Free Style

The Strength Of Steel 3 Rugged, all-steel rings fit rifles with ⁄8" or 11mm Give any gun equipped with Weaver-style Two, socket head cap screws positively clamp Without The Weight dovetail grooves. Reversible clamp flips to give bases the good looks and quick-detach/re- these steel rings to any Weaver-style base. Gives One-piece construction blends you .010" nominal adjustment to ensure tight turn-to-zero advantages of Warne rings. Just two turns let you a nicely finished look. Steel recoil lug prevents the ring and base into a single clamping. Ring straps secured with two screws each. Available tip the ring off the base. Levers can be easily repositioned so both shifting and loss of zero. ab unit. Eliminating the ring/base in Matte and Gloss Black. ab rest at the same angle. ab SPECS: Steel, powder coated Black (Reg.), Matte blue (Matte), or joint not only keeps weight to a minimum, it provides a stronger SPECS: Steel, powder coated, black, matte or gloss finish. Height SPECS: Steel, powder-coated black or nickel plated. Available in pol- Silver Alloy in matte Silver (Silver) finish. Height measured from top 5 mount. Each ring cap is ⁄8" wide, with four TORX screws to keep measured from top of base to inside, bottom of ring. Medium – ished black (Reg.), Matte black, or matte Silver finish. Height mea- of base to inside bottom of ring. Available in Low, .250" (6.35mm); rings & bases large scopes from slipping or shifting. Designed by Mel Forbes of .406" (10.3mm) nominal high. High - .525" (13.3mm) nominal high. sured from top of base to inside bottom of ring. Available in Low, Medium, .375" (9.5mm); High, .525" (13.3mm). New Ultralight Arms. ab STOCK # DIA./HEIGHT FINISH PRICE .250" (6.35mm), Medium, .375" (9.5mm), or High, .525" (13.3mm). 1" MAXIMA TPA RINGS SPECS: 7000 series aluminum, black, anodized, matte finish. #947-000-096AK 1"/Med. Grooved Matte 7D21P08 $ 26.99 1" MAXIMA STEEL ADJUSTABLE LEVER RINGS STK # LOW STK # MEDIUM STK # HIGH FINISH Accepts 1" dia. scopes, unless otherwise listed in fits column #947-000-097AK 1"/Med. Grooved Gloss 7D21P08 $ 26.99 for 30mm dia. scopes. Height from bottom of ring to top of re- STOCK # LOW STOCK # MED STOCK # HIGH FINISH #947-005-111AK #947-005-121AK #947-005-131AK Reg. ceiver: Low - .400" (10.1mm), Med - .500" (12.7mm). High - .640" #947-000-098AK 1"/High Grooved Matte 7D21P08 $ 26.99 #947-523-000AK #947-523-100AK #947-523-200AK Reg. #947-005-112AK #947-005-122AK #947-005-132AK Matte (16.3mm), X‑High - .740" (18.8mm). Approx. weight 2.1 oz. (59 g). #947-000-099AK 1"/High Grooved Gloss 7D21P08 $ 26.99 #947-623-000AK #947-623-100AK #947-623-200AK Matte #947-005-113AK #947-005-123AK #947-005-133AK Silver Some heights vary, see chart below. Rem. 700 also fits 721/722/725 #947-523-001AK #947-523-101AK NA Silver — Advise # — 1" Maxima TPA Rings, Reg, Matte, and 40X models. Rem. Model Seven fits receivers with four screw — Advise # — 1" Steel, Lever, Reg. or Matte, 7D25C10 ...... $ 31.99 holes. Savage AccuTrigger fits round top centerfire receivers with WARNE — Advise # — 1" Maxima TPA Rings, Silver, AccuTrigger. Win. 70 fits .860" rear hole spacing only. 7D44H79 ...... $ 53.99 — Advise # — 1" Steel, Lever, Silver 7D49H50. . . . 61.99 7D30C73 ...... 37.99 STOCK# FITS HEIGHT PRICE EUROPEAN DOVETAIL 30mm MAXIMA TPA RINGS #874-000-026AK Anschutz 54 Med 4G40V19 $ 47.95 MAXIMA RINGS 30mm MAXIMA STEEL ADJUSTABLE LEVER RINGS STOCK # LOW STOCK # MED STOCK # HIGH FINISH STK # LOW STK # MEDIUM STK # HIGH FINISH #874-000-027AK Browning A Bolt Low 4G40V19 $ 47.95 Fits Tikka, BRNO/CZ 527 & NA #947-530-100AK NA Reg. #947-005-311AK NA NA Reg. #874-000-028AK Browning A Bolt Med 4G40V19 $ 47.95 BRNO Integral Bases #874-000-041AK Howa Low 4G40Y19 $ 47.95 #947-630-000AK #947-630-100AK #947-630-200AK Matte #947-005-312AK #947-005-322AK #947-005-332AK Matte Vertically split, rings attach di- NA #947-530-101AK NA Silver NA NA #947-005-333AK Silver #874-000-042AK Howa Med 4G40Y19 $ 47.95 rectly to the factory integral dovetails on Tikka, BRNO/CZ 527 #874-000-037AK 98 Mauser Lg Ring Low 4G40Y19 $ 47.95 and BRNO rifles. TORX screws lock scope, rings and rifle into — Advise # — 30mm Steel, Lever, Reg. or Matte, — Advise # — 30mm Maxima TPA Rings, Reg, Matte, 7D56H55 ...... $ 68.99 7D33C79 ...... $ 40.99 #874-000-039AK Marlin 336/1895 one solid unit. ab — Advise # — 30mm Maxima TPA Rings, Silver, (.500") Low 4G40Y19 $ 47.95 SPECS: MIM Steel, powder coated black, matte. Height measured — Advise # — 30mm Steel, Lever, Silver 7D57H34. . 62.49 7D37C13 ...... 44.99 from top of base to inside bottom of ring: Medium - .425" (8.9mm), #874-000-040AK Marlin 336/1895 34mm MAXIMA STEEL ADJUSTABLE LEVER RINGS (.600") Med 4G40Y19 $ 47.95 High - .535 (13.6mm). 34mm MAXIMA TPA RINGS STOCK # LOW STOCK # MED STOCK # HIGH FINISH #874-000-041AK Rem. 700 Low 4G40Y19 $ 47.95 STK # LOW STK # MEDIUM STK # HIGH FINISH TIKKA-BASE PERMANENT RINGS #947-000-256AK #947-000-257AK #947-000-258AK Matte #874-000-042AK Rem. 700 Med 4G40Y19 $ 47.95 #947-000-259AK #947-000-260AK #947-000-261AK Matte STOCK # DIA/HEIGHT FINISH PRICE — Advise # — 34mm Steel, Lever, Matte, #874-000-110AK Rem. 700 30mm Low 4G41Y03 $ 48.95 — Advise # — 34mm Maxima Steel Rings, Matte, #947-000-035AK 1"/Med Matte 7D37P16 $ 44.99 7D67U43 ...... $ 81.99 #874-000-111AK Rem. 700 30mm Med 4G41Y03 $ 48.95 7D44A52...... $ 53.99 #947-000-036AK 1"/High Matte 7D37P16 $ 44.99 #874-000-043AK Rem. 700 Ext. Low 4G40Y19 $ 47.95 #947-000-038AK 30mm/High Matte 7D35P92 $ 40.99 #874-000-044AK Rem. 700 Ext. Med 4G40Y19 $ 47.95 WARNE #874-000-047AK Rem. Model Seven Low 4G40Y19 $ 47.95 16mm BRNO/CZ-BASE PERMANENT RINGS MAXIMA EXTENSION BASE #874-000-048AK Rem. Model Seven Med 4G40Y19 $ 47.95 STOCK # DIA/HEIGHT FINISH PRICE #874-000-049AK Ruger® 10/22® Low 4G40Y19 $ 47.95 #947-000-114AK 1"/Med Matte 7D37U16 $ 44.99 Simplifies Mounting Of Compact Scopes, Accepts Weaver-Style Rings #874-000-050AK Ruger 10/22 Med 4G40Y19 $ 47.95 #947-000-115AK 1"/High Matte 7D37U16 $ 44.99 #874-000-093AK Sav. AccuTrigger Low 4G40Y19 $ 47.95 Designed to help correctly position compact scopes, or make adjustments to eye relief on standard #947-000-117AK 30mm/Med Matte 7D35U92 $ 40.99 scopes. Accepts Weaver-style and Warne Maxima Rings. Measurement shown indicates additional #874-000-094AK Sav. AccuTrigger Low Ext. 4G40Y19 $ 47.95 #947-000-118AK 30mm/High Matte 7D35U92 $ 40.99 ring groove spacing over standard Warne Maxima base groove spacing. Note: front extension bases can be used as rear extension #874-000-096AK Sav. AccuTrigger Med Ext. 4G40Y19 $ 47.95 bases on some rifles. ab #874-000-102AK Sav. AccuTrigger High 4G40Y19 $ 47.95 19mm BRNO-BASE PERMANENT RINGS SPECS: Steel, blue polished finish (Reg) or blue matte finish (Matte). Three models to add an additional .554", .700", or .854" to ring #874-000-103AK Sav. AccuTrigger X-High 4G40Y19 $ 47.95 STOCK # DIA/HEIGHT FINISH PRICE groove spacing. Accepts Weaver-style and Warne Maxima rings. Can be combined with a standard Warne base to achieve proper ring spacing. Measurements shown are added ring groove spacing. #874-000-055AK Tikka (.500" high) Low 4G40Y19 $ 47.95 #947-000-040AK 1"/Med Matte 7D37P16 $ 44.99 #874-000-056AK Tikka (.600" high) Med 4G40Y19 $ 47.95 #947-000-041AK 1"/High Matte 7D37P16 $ 44.99 BASE STK # REG STK# MATTE FITS #874-000-060AK Wthby Mark V Med 4G40Y19 $ 47.95 MAXIMA TIKKA & BRNO QD RINGS - True, Front Ext. #947-000-236AK #947-629-040AK BSA Monarch; Carl Gustav 2000; Charles Daly; Churchill Highlander; CIL 972C; Colt 57; #874-000-063AK Win. 70 .860" Rear Low 4G40Y19 $ 47.95 QD rings mount directly to the factory integral Base .554" Enfield Win 70 Style; H&R (Pre-1973) 300, 301, 330, 370; Herters U-9 Round Top; Howa #874-000-064AK Win. 70 .860" Rear Med 4G40Y19 $ 47.95 bases. Levers can be easily repositioned so both 1500, 1700; Interarms Mark X, Viscount; Kimber M89 BGR; Marlin 455; Mauser 98; Mauser rest at the same angle. #874-000-065AK Win. 70 .860" FN (Military Model); Montana; Mossberg 1500, 1700; Musgrave MK III & MK IV; Navy Arms SPECS: MIM Steel, powder coated black, matte. Rear F/Ext. Low 4G40Y19 $ 47.95 Height measured from top of base to inside bot- Country Boy Muzzleloader; Parker Hale 1000, 1000C, 1100, 1200, 1700; Raptor Arms Long tom of ring: Medium - .425" (8.9mm), High - .535" Action; Rem 21, 78, 600, 660, 670, 673, 700, 700ML, 722, 725, 798, Seven, New Model 7, (13.6mm). XP100; S&W 1500, 1600, 1700; Sauer 90, 200, 202; Sav Pre-2003 bolt action flat receiver, all WARNE Front Ext. #947-000-237AK #947-629-050AK TIKKA-BASE QD RINGS centerfire Accu-Trigger; Shilen Round Receiver; Stevens 200; Voere 2150, 2165-1, 2165-2, RUGER® CARBINE BASE Base .854" STOCK # DIA/HEIGHT FINISH PRICE 2165-3, 2165-4; Weatherby Mark V Magnum; Vanguard; Win 88, 100, 70 Std. Pre- & Post-64 Easily Mount Electronic Sights #947-000-066AK 1"/Med Matte 7D64P63 $ 79.99 .860 RHS, 70 Pre-64 Magnum .440 RHS, 70 Post-64 Magnum .330 RHS, 70 WSM, 70 WSSM, On Ruger Carbines #947-000-069AK 30mm/High Matte 7D71P45 $ 84.99 670, 770 Convert Ruger PC9, PC40, Ranch Rear Ext. #947-000-236AK #947-629-040AK Carl Gustav 2000; Navy Arms Country Boy Muzzleloader; Sav Pre-2000 bolt action flat 19mm BRNO-BASE QD RINGS Rifle and Mini-30 to Weaver- Base .554" receiver, Accu-Trigger all centerfire; Shilen Round Receiver; Stevens 200; Win 88, 100 style mount. Provides mounting STOCK # DIA/HEIGHT FINISH PRICE ® Rear Ext. #947-000-237AK #947-629-050AK for Holosight , Dot sights and scopes. Attaches directly to the #947-000-071AK 1"/Med Matte 7D64P63 $ 79.99 Ruger ring cuts in the receiver, no gunsmithing required. ab Base .854" #947-000-072AK 1"/High Matte 7D72P09 $ 89.99 SPECS: Aluminum, matte black. 4.75" (12cm) long. — Advise # — Maxima Extension Base, #947-010-000AK Carbine Base 7D28C87...... $ 33.99 #947-000-074AK 30mm/High Matte 7D71P45 $ 84.99 7D11U39 ...... $ 13.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 260 SINCE 1939 Office/Tech: 641-623-5401 WARNE WARNE WEAVER GRAND SLAM BASES WEAVER ® MAXIMA TACTICAL RINGS & BASES MAXIMA RUGER -BASE RINGS Solid Steel, Two-Piece Bases QUAD LOCK RINGS For Rifles, Hunting Handguns Rigid, Steel Construction Permanent Mount, Smooth Profile Four Caps Give Double rings & bases For Maximum Strength Or Quickly Removable QD High-strength, steel bases to fit a The Holding Power wide range of modern and older rifles, For Ultra-Secure Grip Picatinny tactical rings and Vertically split rings mount directly to the plus some long range handguns. Sold each; order front and rear bases, precision-machined factory integral bases on Ruger revolvers, bolt base. (F) front, (R) rear EXTENSION BASES provide added flex- Two caps per base pro- from steel for maximum actions, single shots and the Mini’s. Four TORX ibility for mounting all types of scopes. ab vide twice the clamping strength and reliability. Rug- head screws solidly lock rings to scope and base. SPECS: Steel, blue, matte finish. Fits Weaver Grand Slam, Top power. 210° coverage pro- ged, 1" and 30mm Tactical Solid stainless steel lug provides improved Mount, Tip-Off and See-Thru Mount Rings. Includes screws. vides even clamping pres- Standard Rings feature a robust, stain- strength; won’t deform under heavy recoil. ab sure that pulls scope into RIFLE MODEL REAR FRONT Extension less steel crosslug that will not swage, peen or deform under SPECS: MIM Steel. Powder coat, Gloss black (Reg) or Matte black base, prevents scope from heavy recoil. Ensures consistent return-to-zero for optics that (Mat) in 1" (25.4mm) dia. only. Heights measured from top of base ANSCHUTZ rotating when tightening are removed and re-attached. Three, torx-style fasteners secure to inside bottom of ring. Medium: .460" (11.7mm). High: .585" 54, 54MS, 64, 64MS, 164, 1413, 1422, 1424, 1430, 1432, 1433, caps. All-aluminum construction keeps weight to a minimum the vertically split ring halves at the top to prevent scope shift. (14.9mm). Sold per set (front and rear) only. 1434, 1522, 1530, 1532, 1534 #955-000-040AK (S91) #955-000-040AK (S91) while still providing superb strength. Large, clamping nut at bottom provides exceptional holding 1568 #955-000-033AK (S61) #955-000-026AK (S46) SPECS: Aluminum, gloss black, matte black, or natural silver fin- RUGER-BASE PERMANENT RINGS power. One-piece, Tactical Bases are made from solid bar stock ® ® ® ® BROWNING ish. Height from top of base to bottom of ring: Medium - .160" No.1, No.3, 77/22 , Mini-14 & Mini-Thirty , Redhawk of cold drawn alloy steel, stress relieved for extra strength and A-Bolt, A-Bolt 22 #955-000-027AK (S47) #955-000-027AK (S47) (4mm). High - .328" (8.3mm). Standard and Extension (Ext) rings fit uniformity. Available for standard elevation adjustment or with STOCK # DIA/HEIGHT FINISH PRICE BAR, BAR II, Mark II, semi-auto #955-000-029AK (S54) #955-000-029AK (S54) Weaver-style bases. Extension sets include one standard ring and 20 MOA forward angle for extra long range shooting. ab BBR long & short action #955-000-027AK (S47) #955-000-026AK (S46) one extension ring. Others have two standard rings. Tip-Off rings #947-000-018AK 1"/Med Reg 7D33P79 $ 40.99 3 SPECS: Rings: Steel, matte black, powder coat finish. Medium - BSA Monarch med./L action #955-000-024AK (S36) #955-000-023AK (S35) fit ⁄8" grooved .22 rimfire receivers. .375" (9.5mm) high. High - .525" (13.3mm) high. Extra-High - .650" #947-000-019AK 1"/Med Mat 7D33P79 $ 40.99 Monarch med./L action F/ext. #955-000-024AK (S36) #955-000-042AK (S40A) STOCK # STYLE FINISH PRICE (16.5mm) high. Ultra-High - .935" (23.7mm) high. Bases: 12L14 #947-000-021AK 1"/High Mat 7D37P16 $ 44.99 carbon steel, powder coated, matte black. Available in standard or CHURCHILL Highlander #955-000-024AK (S36) #955-000-023AK (S35) #955-000-001AK 1" Medium Gloss 5E12U98 $ 15.99 RUGER-BASE PERMANENT RINGS Highlander F/ext. #955-000-024AK (S36) #955-000-042AK (S40A) 20 MOA. Savage bases available for models with and without Accu- ® ® ® #955-000-002AK 1" High Gloss 5E12U98 $ 15.99 ™ M77 & M77 Mark II, Blackhawk Hunter, Super Redhawk Trigger (Accu). Winchester bases fit current production Model 70. CIL 950, 950C #955-000-033AK (S61) #955-000-026AK (S46) #955-000-003AK 1" High Ext. Gloss 5E14U71 $ 17.99 TACTICAL RINGS 950, 950C F/extension #955-000-033AK (S61) #955-000-081AK (S402) STOCK # DIA/HEIGHT FINISH PRICE #955-000-004AK 1" Medium Matte 5E12U98 $ 15.99 972-C #955-000-025AK (S45) #955-000-026AK (S46) STOCK # DIA./HEIGHT PRICE #947-000-024AK 1"/Med Reg 7D33P79 $ 40.99 972-C F/extension #955-000-025AK (S45) #955-000-081AK (S402) #955-000-005AK 1" High Matte 5E12U98 $ 15.99 #947-000-113AK 1"/Medium 7D78U97 $ 98.99 #947-000-025AK 1"/Med Mat 7D33P79 $ 40.99 COLT Coltsman LA round receiver #955-000-006AK 1" High Ext. Matte 5E14U71 $ 17.99 #947-000-121AK 1"/High 7D78U97 $ 98.99 #947-000-027AK 1"/High Mat 7D37P16 $ 44.99 #955-000-029AK (S54) #955-000-029AK (S54) #955-000-104AK 1" Medium Silver 5E12U98 $ 15.99 #947-000-122AK 1"/Extra-High 7D78U97 $ 98.99 MAXIMA RUGER-BASE QD RINGS - Adjust- Sauer #955-000-023AK (S35) #955-000-023AK (S35) #955-000-105AK 1" High Silver 5E12U98 $ 15.99 #947-000-123AK 1"/Ultra-High 7D78U97 $ 98.99 able lever rings mount to factory integral bases. Sauer F/R/extension #955-000-042AK (S40A) #955-000-042AK (S40A) #955-000-106AK 1" High Ext. Silver 5E14U71 $ 17.99 Provides true, quick-detach capability. Levers 57 #955-000-025AK (S45) #955-000-026AK (S46) #947-000-112AK 30mm/Medium 7D84U30 $ 104.99 #955-000-102AK 1" Tip Off Matte 5E15U60 $ 18.99 may be aligned after tightening. Four, TORX 57 F/extension #955-000-025AK (S45) #955-000-081AK (S402) #947-000-125AK 30mm/High 7D84U30 $ 104.99 head screws solidly lock rings to scope. COOEY 71 #955-000-027AK (S47) #955-000-026AK (S46) #947-000-126AK 30mm/Extra-High 7D84U30 $ 104.99 SPECS: MIM Steel. Powder coat, Gloss black ENFIELD receiver cut down like: (Reg) or Matte black (Mat) in 1" (25.4mm) dia. Remington 721 #955-000-024AK (S36) #955-000-023AK (S35) RIFLE MODEL REAR FRONT #947-000-127AK 30mm/Ultra-High 7D84U30 $ 104.99 only. Heights measured from top of base to inside Remington 721, F/extension #955-000-024AK (S36) #955-000-042AK (S40A) REMINGTON 700 long action, TACTICAL BASES bottom of ring. Medium: .460" (11.7mm). High: .585" (14.9mm). Winchester 70 #955-000-027AK (S47) #955-000-026AK (S46) Sold per set (front and rear) only. 78, 40-XL, 721, 725 #955-000-024AK (S36) #955-000-023AK (S35) STOCK # HEIGHT/FITS PRICE H&R 300, 301, 330, 370 pre-1973 #955-000-025AK (S45) #955-000-026AK (S46) 700 short action, 700 ML #955-000-024AK (S36) #955-000-023AK (S35) #947-000-128AK Std/Rem 700 SA 7D72U77 $ 82.99 RUGER-BASE QD RINGS 300, 301 LA pre-1973 F/ext. #955-000-025AK (S45) #955-000-081AK (S402) 700 LA/SA, 700 ML F/ext. #955-000-024AK (S36) #955-000-042AK (S40A) No.1, No.3, 77/22, Mini-14 & Mini-Thirty, Redhawk 300, 301 long action post-1973 #955-000-029AK (S54) #955-000-026AK (S46) SAKO Whitetail Hunter #955-000-033AK (S61) #955-000-033AK (S61) #947-000-129AK Std/Rem 700 LA 7D72U77 $ 82.99 300, 301 LA post-1973 F/ext. #955-000-029AK (S54) #955-000-081AK (S402) STOCK # DIA/HEIGHT FINISH PRICE SAUER 200 #955-000-023AK (S35) #955-000-023AK (S35) #947-000-262AK Std/Rem 870/1100 7D72A77 $ 82.99 HERTER'S U-9 round receiver #955-000-024AK (S36) #955-000-023AK (S35) #947-000-049AK 1"/Med Reg 7D64P63 $ 79.99 200, F/R/extension #955-000-042AK (S40A) #955-000-042AK (S40A) #947-000-130AK Std/Sako TRG 7D72U77 $ 82.99 U-9 round receiver, F/ext. #955-000-024AK (S36) #955-000-042AK (S40A) SAVAGE 110, 116, 10, 11, 12 #955-000-033AK (S61) #955-000-026AK (S46) #947-000-050AK 1"/Med Mat 7D64P63 $ 79.99 #947-000-131AK Std/Savage SA 7D72U77 $ 82.99 J-9 & FN action #955-000-025AK (S45) #955-000-026AK (S46) 10 & 110 series F/extension #955-000-033AK (S61) #955-000-081AK (S402) #947-000-052AK 1"/High Mat 7D72P09 $ 89.99 J-9 & FN action, F/extension #955-000-025AK (S45) #955-000-081AK (S402) SEARS 50, 51 FN action #955-000-025AK (S45) #955-000-026AK (S46) #947-000-132AK Std/Savage LA 7D72U77 $ 82.99 HIGH STANDARD Hi-Power #955-000-030AK (S55) #955-000-026AK (S46) RUGER-BASE QD RINGS 51L #955-000-030AK (S55) #955-000-026AK (S46) #947-000-133AK Std/Savage SA, Accu 7D72U77 $ 82.99 HOWA 1500 #955-000-024AK (S36) #955-000-023AK (S35) For M77 & M77 Mark II, Super Redhawk 53 #955-000-027AK (S47) #955-000-026AK (S46) #947-000-134AK Std/Savage LA, Accu 7D72U77 $ 82.99 1500, F/extension #955-000-024AK (S36) #955-000-042AK (S40A) SHILEN flat top receiver #955-000-033AK (S61) #955-000-033AK (S61) STOCK # DIA/HEIGHT FINISH PRICE #947-000-135AK Std/Win 70 SA 7D72U77 $ 82.99 ITHACA LSA-55, LSA-65 #955-000-033AK (S61) #955-000-033AK (S61) round receiver #955-000-023AK (S35) #955-000-023AK (S35) #947-000-055AK 1"/Med Reg 7D64P63 $ 78.99 KNIGHT MK 85 , BK-92, T-Bolt #955-000-033AK (S61) #955-000-033AK (S61) #947-000-136AK Std/Win 70 LA 7D72U77 $ 82.99 round receiver F/R/extension #955-000-042AK (S40A) #955-000-042AK (S40A) #947-000-056AK 1"/Med Mat 7D64P63 $ 78.99 LK-93, Wolverine, Legend, Disc #955-000-025AK (S45) #955-000-025AK (S45) SMITH & WESSON #955-000-030AK (S55) #955-000-026AK (S46) #947-000-138AK 20MOA/Rem700 SA 7D86U35 $ 97.99 MARLIN 9, 36, 45, 62, 93, 336, 375, 444, 1893, 1894, 1895, Camp Carbine, Mauser action 1500, 1600, #955-000-024AK (S36) #955-000-023AK (S35) #947-000-139AK 20MOA/Rem 700 LA 7D86U35 $ 97.99 922M, 989, Glenfield 30 #955-000-072AK (S466) #955-000-072AK (S466) 1700, 1500, 1600, 1700 F/ext. #955-000-024AK (S36) #955-000-042AK (S40A) #947-000-140AK 20MOA/Sako TRG 7D86U35 $ 97.99 WEAVER .22 RIMFIRE / AIRGUN MR7 #955-000-027AK (S47) #955-000-026AK (S46) SPRINGFIELD ‘03 #955-000-029AK (S54) #955-000-030AK (S55) ® 455 #955-000-025AK (S45) #955-000-026AK (S46) #947-000-141AK 20MOA/Savage SA 7D86U35 $ 97.99 TIP-OFF MOUNT STEVENS 110 E #955-000-033AK (S61) #955-000-026AK (S46) MAUSER TIKKA flat receiver #955-000-033AK (S61) #955-000-033AK (S61) #947-000-143AK 20MOA/Savage SA, Accu 7D86U35 $ 97.99 No Bases Required FN, HVA, Model 98 large ring #955-000-025AK (S45) #955-000-026AK (S46) VOERE 2150, 2165, Model 98 F/ext. #955-000-025AK (S45) #955-000-081AK (S402) #947-000-144AK 20MOA/Savage LA, Accu 7D86U35 $ 97.99 1" rings with integral bas- Mauser action #955-000-025AK (S45) #955-000-026AK (S46) #947-000-146AK 20MOA/Win 70 LA 7D86U35 $ 97.99 es for .22 rimfire rifles and HVA, Swedish 96 small ring #955-000-030AK (S55) #955-000-026AK (S46) Mauser action F/extension #955-000-025AK (S45) #955-000-081AK (S402) 3 Model 95, 96 F/ext. #955-000-030AK (S55) #955-000-081AK (S402) airguns with ⁄8" (9.5mm) WEATHERBY Mark V, Vanguard #955-000-024AK (S36) #955-000-023AK (S35) dovetail receiver grooves. No MOSSBERG 680, 695, 800 #955-000-030AK (S55) #955-000-030AK (S55) Mark V, Vanguard F/ext #955-000-024AK (S36) #955-000-042AK (S40A) bases required. 2-Hole has caps that hook under the base on 1500, 1550, 1700 #955-000-024AK (S36) #955-000-023AK (S35) Mark V 22-250, 224, 30-06 #955-000-024AK (S36) #955-000-026AK (S46) WEAVER PARTS KIT one side and secure with two screws on the other. Pro-View has 1500, 1550, 1700 F/ext. #955-000-024AK (S36) #955-000-042AK (S40A) WESTERNFIELD 770, 775, 780 #955-000-030AK (S55) #955-000-030AK (S55) symmetrical caps with two screws on each side. See-Thru model All The Parts You Need MUSGRAVE Mark I, Mark II #955-000-029AK (S54) #955-000-026AK (S46) WINCHESTER is a raised version of the 2-Hole design that allows instant use Mark I, II F/extension #955-000-029AK (S54) #955-000-081AK (S402) 70 long and short action, H&H mags above #1,896,476 of scope or iron sights when sighting. ab Handy collection of replacement Mark III, Mark IV #955-000-025AK (S45) #955-000-026AK (S46) #955-000-027AK (S47) #955-000-026AK (S46) parts and screws for all Weaver SPECS: Base - Aluminum, anodized, black. Cap - Steel, black finish. Mark III, IV F/extension #955-000-025AK (S45) #955-000-081AK (S402) 70 long and short action, H&H mags above #1,896,476 Scopes and Mounts. Inc­ ludes top Accepts 1" (2.5cm) scopes. Sold in pairs. NAVY ARMS Country Boy #955-000-026AK (S46) #955-000-026AK (S46) 70 Target, H&H mags up to straps, saddles, thumb screws, mount #955-494-100AK 2-Hole Tip-Off Mount 5E19B41. . $ 28.99 PARKER HALE 1000, 1000C, ab #1,896,476 #955-000-049(S434) #955-000-026AK (S46) clamps and various screws. #955-494-101AK Pro-View Tip-Off Mount, 1100, 1200, 1700 #955-000-025AK (S45) #955-000-026AK (S46) SPECS: 320 pieces in 12 compartment bench box. 5E14B28...... 16.99 52 hole spacing same #955-000-026AK (S46) #955-000-026AK (S46) #955-200-250AK Weaver Parts Kit, #955-495-010AK See-Thru Tip-Off Mount, RAPTOR ARMS 700 action #955-000-024AK (S36) #955-000-023AK (S35) 670, 770 #955-000-027AK (S47) #955-000-026AK (S46) 5E42Z71...... $ 62.99 5E18B55...... 25.99 700 action F/ext. #955-000-024AK (S36) #955-000-042AK (S40A) — Advise # — Grand Slam Base 5E11U02. . . . . $ 12.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 261 WEAVER TOP MOUNT BASES RIFLE MODEL REAR 1-PC/SET FRONT RIFLE MODEL REAR 1-PC/SET FRONT RIFLE MODEL REAR 1-PC/SET FRONT One- & Two-Piece Bases Colt continued Marlin continued Remington continued For Rifles, Shotguns, Handguns #955-010-041AK (40A-M) #955-010-041AK (40A-M) MR-7 F/extension #955-010-047AK (47) #955-010-402AK (402) 25 #955-010-018AK (18) #955-010-021AK (21) #955-010-147AK (47M) #955-010-401AK (402M) 30, 720 #955-010-011AK (11) #955-010-011AK (11) Lightweight aluminum bases fit 57 #955-010-045AK (45) #955-010-046AK (46) 39A #955-010-090AK (90) 33 #955-010-017AK (17) #955-010-013AK (13) a wide range of modern and older #955-000-121AK (45M, 46M)* rifles, plus shotguns and long range handguns. Sold each; order COOEY 71 #955-010-047AK (47) #955-010-046AK (46) 39A #955-010-029AK (29) #955-010-016AK (16) 41 #955-010-017AK (17) #955-010-017AK (17) front and rear base. One piece bases and base pair sets available #955-010-147AK (47M) #955-010-146AK (46M) 455 #955-010-045AK (45) #955-010-046AK (46) 513S, 513T #955-010-043AK (43) #955-010-044AK (44) #955-000-121AK (45M, 46M)* 514 #955-010-016AK (16) #955-010-021AK (21) for some models. Base pair sets are marked with * or **. ab #955-000-125AK (47M, 46M)* 455, F/extension #955-010-045AK (45) #955-010-402AK (402) 514 if not drilled & tapped, 550 #955-010-012AK (12) #955-010-012AK (12) SPECS: Aluminum, polished blue finish except Matte (M), Silver CVA Round Receiver #955-010-418AK (418M) #955-010-418AK (418M) 57 Magnum #955-010-058AK (58) 541S, 541T #955-010-015AK (15) #955-010-015AK (15) (S). Extension bases: Front (F), Rear (R). Fits Top Mount and See- ENFIELD receiver cut down like: 88, 89, 98, 917 #955-010-018AK (18) #955-010-018AK (18) 597 #955-010-414AK (414M) Thru Mount Rings. Remington 30 #955-010-011AK (11) #955-010-011AK (11) 80, 81, 980 #955-010-012AK (12) #955-010-012AK (12) #955-010-424AK (414S) RIFLE MODEL REAR 1-PC/SET FRONT Remington 721 #955-010-036AK (36) #955-010-035AK (35) rings & bases MAUSER Bauer 3000, 4000 #955-010-068AK (68) #955-010-046AK (46) Shotgun (all drilled & tapped models) #955-000-133AK (429M) ANSCHUTZ Mark 12 #955-010-016AK (16) #955-010-016AK (16) #955-010-136AK (36M) #955-010-135AK (35M) Bauer F/ext #955-010-068AK (68) #955-010-402AK (402) ROSSI Single Shot Firearms #955-010-092AK (92A) 54, 54MS, 64, 64ms, 164, 1413, 1422, 1424, 1430, 1432, 1433, Remington 721 F/ext. #955-010-036AK (36) #955-010-040AK (40A) FN, HVA, Model 95, 98 large ring #955-010-045AK (45) #955-010-046AK (46) RUGER® 10/22® #955-000-130AK (504M, 503M)* #955-010-136AK (36M) #955-010-041AK (40A-M) 1434, 1522, 1530, 1532, 1534 #955-010-091AK (91) #955-010-091AK (91) #955-000-121AK (45M, 46M)* No. 3 #955-010-085AK (85) #955-010-086AK (86) Winchester 70 #955-010-047AK (47) #955-010-046AK (46) 153 Deluxe #955-010-019AK (19) #955-010-019AK (19) FN, HVA, 95, 98 large ring F/ext #955-010-045AK (45) #955-010-402AK (402) 77 round top #955-010-079AK (79) #955-010-035AK (35) 1568 #955-010-061AK (61) #955-010-046AK (46) #955-010-147AK (47M) #955-010-146AK (46M) Swedish 96, HVA, small ring #955-010-055AK (55) #955-010-046AK (46) 44 Magnum Deer Stalker #955-010-047AK (47) #955-010-068AK (68) #955-000-125AK (47M, 46M)* Swede 96, HVA small ring F/ext #955-010-055AK (55) #955-010-402AK (402) SAKO Finnwolf #955-010-053AK (53) #955-010-161AK (61M) #955-010-146AK (46M) Winchester 70 F/ext. #955-010-047AK (47) #955-010-402AK (402) Mark X #955-010-055AK (55) #955-010-020AK (20A) Whitetail Hunter #955-010-061AK (61) #955-010-061AK (61) AUSTIN & HALLECK #955-010-147AK (47M) #955-010-401AK (402M) Mini-Mark X #955-010-023AK (23) #955-011-071AK (71A) #955-010-161AK (61M) #955-010-161AK (61M) 420 (inline M/L) #955-010-085AK (85) #955-010-085AK (85) GARCIA 73 #955-010-053AK (53) MOSSBERG 25, 26, 42, 46M, 140, 142, 146, 72, 75, 78 #955-010-085AK (85) #955-010-085AK (85) BENELLI Super Blk Eagle, S. Blk Eagle II #955-010-093AK (93) 3 H&R 65, 165, 150, 151 semi-auto #955-010-018AK (18) #955-010-018AK (18) also 45, 46 w/ ⁄4" dia. bbls. #955-010-012AK (12) #955-010-013AK (13) SAUER 200 #955-010-035AK (35) #955-010-035AK (35) Nova #955-010-004AK (423M) 176 #955-010-083AK (83) 40 #955-010-016AK (16) #955-010-021AK (21) #955-010-135AK (35M) #955-010-135AK (35M) BROWNIING A-Bolt after 1996, #955-010-047AK(47) #955-010-084AK (84) 250, 251, 264, 265, 365, 450, 550 #955-010-018AK (18) #955-010-016AK (16) 43, 44, 144, 468T, 35. Also models 45, 46, 200 F/R/Extension #955-010-040AK (40A) #955-010-040AK (40A) 13 except WSSM 300, 301, 330, 370 before 1973 #955-010-045AK (45) #955-010-046AK (46) 46A, 46B w/ ⁄16" dia. bbls. #955-010-012AK (12) #955-010-016AK (16) #955-010-041AK (40A-M) #955-010-041AK (40A-M) A-Bolt, A-Bolt 22 before 1996 #955-010-047AK (47) #955-010-047AK (47) #955-000-121AK (45M, 46M)* 50, 51, 151, 152, 350, 352 #955-010-012AK (12) #955-010-012AK (12) SHR 970 #955-010-025AK (25) #955-010-025AK (25) #955-010-147AK (47M) #955-010-147AK (47M) 300, 301 pre 1973, F/extension #955-010-045AK (45) #955-010-402AK (402 400 #955-010-020AK (20A) #955-010-042AK (42) SAVAGE 99, 1895, 1899 #955-010-014AK (14) #955-010-019AK (19) A-Bolt WSSM, .204 & .223 #955-000-092AK (427)# #955-010-047AK (47) 500A, 600 shotguns before 1997 #955-010-088AK (88) 110 through 116 #955-010-413AK (413) 300, 301 short action post 1973 #955-010-083AK (83) #955-010-084AK (84) A-Bolt European model #955-010-085AK (85) #955-010-085AK (85) 500 after 1997, 835 shotguns #955-000-084AK (417M) 110, 111, 116, 10, 11, 16 #955-010-061AK (61) #955-010-046AK (46) 300, 301 long action post 1973 #955-010-054AK (54) #955-010-046AK (46) A-Bolt Shotgun #955-010-147AK (47M) #955-010-419AK (419M) #955-000-132AK (500M, 500M)** #955-010-161AK (61M) #955-010-146AK (46M) 300, 301 post 1973, F/extension #955-010-054AK (54) #955-010-402AK (402) BBR FN Mauser action #955-010-045AK (45) #955-010-046AK (46) 640 #955-010-063AK (63B) #955-000-122AK (61M, 46M)* 317, 322 #955-010-011AK (11) #955-010-035AK (35) #955-000-121AK (45M, 46M)* #955-000-091AK (63B-S) 110, 116, 10, 16 F/Ext. #955-010-061AK (61) #955-010-402AK (402) 317, 322, F/extension #955-010-011AK (11) #955-010-040AK (40A) BBR F/extension #955-010-045AK (45) #955-010-402AK (402) 680, 695, 800 #955-010-055AK (55) #955-010-055AK (55) #955-010-161AK (61M) #955-010-401AK (402M) 360, 361 #955-010-081AK (81) BBR long & short action #955-010-047AK (47) #955-010-046AK (46) 810, RM7 #955-010-025AK (25) #955-010-011AK (11) 10-16, 110-116, Topper 30, 22 Jet, 158 before 1973 #955-010-060AK (60A) #955-010-147AK (47M) #955-010-146AK (46M) 1500, 1550, 1700 #955-010-036AK (36) #955-010-035AK (35) w/AccuTrigger, Stevens 200 #955-010-046AK (46) #955-010-046AK (46) Topper 155, 157, 158C after 1973 #955-010-082AK (82) #955-000-125AK (47M, 46M)* #955-010-136AK (36M) #955-010-135AK (35M) #955-010-146AK (46M) #955-010-146AK (46M) 700 #955-010-087AK (87) BBR F/extension #955-010-047AK (47) #955-010-402AK (402) #955-000-117AK (36M, 35M)* #955-012-046AK (46S) #955-012-046AK (46S) 755, 765, 852, 865 #955-010-017AK (17) #955-010-021AK (21) #955-000-123AK (46M, 46M)* #955-010-147AK (47M) #955-010-401AK (402M) #955-000-118AK (36S, 35S)* 800 #955-010-012AK (12) #955-010-012AK (12) #955-000-124AK (46S, 46S)* BAR, BAR II, Mark II, semi-auto #955-010-054AK(54) #955-010-054AK (54) 1500, 1550, 1700, F/extension #955-010-036AK (36) #955-010-040AK (40A) 980 Ultra, 232C 10 Gauge #955-010-019AK (19) #955-010-019AK (19) #955-010-136AK (36M) #955-010-041AK (40A-M) 3 #955-010-016AK (16) #955-010-021AK (21) #955-000-127AK (54M, 54M)* HERTERS U9 BSA dovetail action #955-010-028AK (28) #955-010-028AK (28) MUSGRAVE Mark I, Mark II #955-010-054AK (54) #955-010-046AK (46) 4, 5 #955-010-012AK (12) #955-010-013AK (13) BLR #955-010-025AK (25) #955-010-025AK (25) U-9 round receiver #955-010-036AK (36) #955-010-035AK (35) Mark I, II F/extension #955-010-054AK (54) #955-010-402AK (402) 6, 7 #955-010-012AK (12) #955-010-012AK (12) BLR flat top receiver #955-010-028AK (28) #955-010-028AK (28) #955-010-136AK (36M) #955-010-135AK (35M) Mark III, Mark IV #955-010-045AK (45) #955-010-046AK (46) 19, 23 #955-010-015AK (15) #955-010-016AK (16) T-Bolt (new model) #955-010-015AK (15) #955-010-015AK (15) J-9 FN action #955-010-045AK (45) #955-010-046AK (46) #955-000-121AK (45M, 46M)* 24, 24V #955-010-074AK (74) 1885 Hi Wall octagon barrel #955-010-011AK (11) #955-010-029AK (29) #955-000-121AK (45M, 46M)* Mark III, IV, F/extension #955-010-045AK (45) #955-010-402AK (402) 29 round barrel #955-010-011AK (11) #955-010-022AK (22) 22 Auto base attaches to barrel extends over receiver. Norinco clones. J-9 FN Action, F/extension #955-010-045AK (45) #955-010-402AK (402) NEW ENGLAND FIREARMS Handy Rifle #955-010-082AK (82) 40, 45 #955-010-011AK (11) #955-010-011AK (11) #955-010-060AK (60A) HIGH STANDARD High-Power #955-010-055AK (55) #955-010-046AK (46) 10 gauge shotgun #955-010-019AK (19) #955-010-019AK (19) 67 #955-010-093AK (93) 52 #955-010-085AK (85) #955-010-085AK (85) High-Power F/extension #955-010-055AK (55) #955-010-040AK (40A) PARKER HALE 1000, 1000C, 1100, 1200, 1700 93 #955-010-016AK (16) #955-010-016AK (16) 170 #955-010-062AK (62) BSA Monarch med./L action, F/ext. #955-010-036AK (36) #955-010-040AK (40A) HOWA 1500 #955-010-036AK (36) #955-010-035AK (35) #955-010-045AK (45) #955-010-046AK (46) #955-000-121AK (45M, 46M)* 219 #955-010-012AK (12) #955-010-030AK (30) #955-010-136AK (36M) #955-010-041AK (40A-M) #955-010-136AK (36M) #955-010-135AK (35M) 1000, 1100, 1200, 1700, F/ext #955-010-045AK (45) #955-010-402AK (402) SCHULTZ & LARSEN #955-010-054AK (54) #955-010-046AK (46) Monarch, CF2 long action #955-010-036AK (36) #955-010-035AK (35) #955-000-117AK (36M, 35M)* REMINGTON 700, 78, 40-XL, 721, SEARS 50, 51 FN Action #955-010-045AK (45) #955-010-046AK (46) #955-010-136AK (36M) #955-010-135AK (35M) #955-000-118AK (36S, 35S)* 722, 725, 700ML, LA/SA #955-010-036AK (36) #955-010-035AK (35) #955-000-121AK (45M, 46M)* #955-000-117AK (36M, 35M)* 1500, F/extension #955-010-036AK (36) #955-010-040AK (40A) #955-000-118AK (36S, 35S)* #955-010-136AK (36M) #955-010-135AK (35M) 50, 51 F/Extension #955-010-045AK (45) #955-010-402AK (402) #955-010-136AK (36M) #955-010-041AK (40A-M) #955-000-117AK (36M, 35M)* 51L #955-010-055AK (55) #955-010-046AK (46) Medium action one-piece base #955-010-097AK (97) ITHACA LSA-55, LSA-65 #955-010-061AK (61) #955-010-061AK (61) Long action one-piece base #955-010-098AK (98) #955-000-118AK (36S, 35S)* 53 #955-010-047AK (47) #955-010-046AK (46) #955-010-161AK (61M) #955-010-161AK (61M) #955-010-147AK (47M) #955-010-146AK (46M) Other high powers #955-010-028AK (28) #955-010-028AK (28) 700, 78, 40-XL, 721, 722, 725, JAPANESE Arisaka 6.5mm, 7.7mm #955-010-070AK (70) 700ML, LA/SA, F/extension #955-010-036AK (36) #955-010-040AK (40A) #955-000-125AK (47M, 46M)* CHARLES DALY Mini Mauser #955-010-023AK (23) #955-011-071AK (71A) KIMBER Win 70 style #955-010-049AK (49A) #955-010-046AK (46) #955-010-136AK (36M) #955-010-041AK (40A-M) 53 F/Extension #955-010-047AK (47) #955-010-402AK (402) 98 #955-010-055AK (55) #955-010-035AK (35) 82 #955-010-083AK (83) 700, 78, 40-XL long action one-piece #955-010-098AK (98) #955-010-147AK (47M) #955-010-401AK (402M) CIL 871 #955-010-062AK (62) 82C #955-010-054AK (54) #955-010-054AK (54) 700, 78, 40-XS short action one-piece #955-010-097AK (97) SHILEN Flat top receiver #955-010-061AK (61) #955-010-061AK (61) 900 #955-010-019AK (19) #955-010-019AK (19) KNIGHT MK 85 Muzzleloader #955-010-061AK (61) #955-010-061AK (61) 788 #955-010-076AK (76) #955-010-075AK (75) #955-010-161AK (61M) #955-010-161AK (61M) 950, 950C #955-010-061AK (61) #955-010-046AK (46) #955-010-161AK (61M) #955-010-161AK (61M) 7 new model w/4-hole receiver #955-010-006AK (421M) #955-010-135AK (35M) Round receiver #955-010-035AK (35) #955-010-035AK (35) #955-010-161AK (61M) #955-010-146AK (46M) LK-93, Wolverine, Legend #955-010-045AK (45) #955-010-045AK (45) 7 new model F/ext., 673 #955-010-006AK (421M) #955-010-041AK (40A-M) #955-010-135AK (35M) #955-010-135AK (35M) #955-000-122AK (61M, 46M)* LONE EAGLE SSP 91 pistol #955-010-016AK (16) #955-010-016AK (16) 7, 600, 660, XP-100 single shot (3-hole) #955-010-070AK (70) SHOTGUNS Double & single barrel 972-C #955-010-045AK (45) #955-010-046AK (46) MARLIN 9, 36, 45, 62, 93, 336, 375, 444, 1893, 1894, 1895, 4, 6, 74, 76, 7400, 7600, 7615 #955-010-093AK (93) w/rib thick enough for base screws #955-010-050AK (50) #955-000-121AK (45M, 46M)* Camp 9 Carbine, 922M, 989, Glenfield 30 #955-010-063AK (63B) 740, 742, 760 #955-010-062AK (62) SMITH & WESSON Mauser Action#955-010-055AK (55) #955-010-046AK (46) COLT Coltsman SA round receiver #955-010-025AK (25) #955-010-025AK (25) #955-000-091AK (63B-S) #955-000-129AK (602M, 601M)* 1500, 1600, 1700 #955-010-036AK (36) #955-010-035AK (35) Coltsman LA round receiver #955-010-054AK (54) #955-010-054AK (54) 10, 11, 12, 34, 341, 510, 512, 521T #955-010-043AK (43) #955-010-042AK (42) #955-010-136AK (36M) #955-010-135AK (35M) #955-000-128AK (336M, 336M)* 3 #955-000-127AK (54M, 54M)* 12A, 121 w/ ⁄4" dia. barrels #955-010-018AK (18) #955-010-013AK (13) #955-000-117AK (36M, 35M)* A-1, 50 #955-010-015AK (15) #955-010-015AK (15) Sauer #955-010-035AK (35) #955-010-035AK (35) Genesis Muzzleloader #955-010-418AK (418M) #955-010-418AK (418M) #955-000-118AK (36S, 35S)* MR7 #955-010-047AK (47) #955-010-046AK (46) 13 #955-010-135AK (35M) #955-010-135AK (35M) 121 w/ ⁄16" dia. barrel #955-010-018AK (18) #955-010-017AK (17) 1500, 1600, 1700 F/Ext. #955-010-036AK (36) #955-010-040AK (40A) Sauer, F/R/extension #955-010-040AK (40A) #955-010-040AK (40A) #955-010-147AK (47M) #955-010-146AK (46M) 14, 141 #955-010-020AK (20A) #955-010-027AK (27) #955-010-136AK (36M) #955-010-041AK (40A-M) #955-000-125AK (47M, 46M)* 24, 241 #955-010-060AK (60A) Colt Top Mount Bases continued in next column Marlin Top Bases continued in next column Remington Top Mount Bases continued in next column Top Mount Bases continued on next page ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 262 SINCE 1939 Office/Tech: 641-623-5401 WEAVER WEAVER RIFLE MODEL REAR 1-PC/SET FRONT RIFLE MODEL REAR 1-PC/SET FRONT Short Shown SPRINGFIELD ‘03 #955-010-054AK (54) #955-010-055AK (55) Wichester continued SURE-GRIP RINGS SIDE MOUNT 1" RINGS 03-A3 #955-010-059AK (59) #955-010-045AK (45) 61 octagon barrel #955-010-025AK (25) #955-010-032AK (32) Give Uniform High-Strength rings & bases STEVENS 26 #955-010-022AK (22) #955-010-022AK (22) 74 #955-010-012AK (12) #955-010-012AK (12) & BASE Clamping Power 53 #955-010-016AK (16) #955-010-021AK (21) 75 Sporter #955-010-015AK (15) #955-010-030AK (30) For Bolt & Ejection Clearance 56, 66 #955-010-012AK (12) #955-010-013AK (13) 75 Target #955-010-015AK (15) #955-010-016AK (16) Steel caps with two screws 1 One-piece rings and sub-base mount 57, 76, 417- ⁄2, 762 #955-010-012AK (12) #955-010-012AK (12) 77 #955-010-015AK (15) #955-010-032AK (32) per side provide extra strong, scope to side of receiver to provide 110 E #955-010-061AK (61) #955-010-046AK (46) 88, 100 #955-010-053AK (53) 4-screw, clamping power. Helps ensure that reticle stays square 94 Big Bore Angle Eject #955-010-095AK (95) #955-010-403AK (403) while tightening top screws. Large clamp nut locks rings to base, clearance for bolt handles, easier load- #955-010-161AK (61M) #955-010-146AK (46M) ing and ejection. Long and Short ring 416 #955-010-018AK (18) #955-010-017AK (17) 94 Angle Eject except earliest #955-010-095AK (95) #955-010-094AK (94) provides easy scope installation, removal; and accurate return to ab mounts give correct spacing for compact or large scopes. Use 417 #955-010-015AK (15) #955-010-015AK (15) #955-000-131AK (95M, 94M)* zero after re-installation. SPECS: Aluminum lower; steel cap, screws, crossbolt and nut. Weaver Side Mount rings only. ab 418, 418-½ #955-010-016AK (16) #955-010-016AK (16) 670, 770 #955-010-047AK (47) #955-010-046AK (46) Black, gloss or matte finish. Heights (above base): 1" (2.5cm) dia- SPECS: Rings: Sub-base, aluminum, anodized, black; steel ring STEVENS-SPRINGFIELD 83 #955-010-016AK (16) #955-010-021AK (21) #955-010-147AK (47M) #955-010-146AK (46M) cap, black. Distance between rings - Long 3.7" (9.3cm), Short #955-000-125AK (47M, 46M)* meter - Med., .164" (4.16mm); High, .332" (8.43mm); X-High, .560" 85, 87, 872 #955-010-012AK (12) #955-010-012AK (12) (14.2mm). 1.8" (4.7cm). Base: Aluminum, black, anodized finish. THOMPSON CENTER TCR rifle #955-010-405AK (405) 670, 770 F/ext. #955-010-047AK (47) #955-010-402AK (402) #955-493-103AK 1" Short Side Mnt Ring 5E31P02. $ 35.99 STOCK # HEIGHT SIZE FINISH PRICE Contender handgun & carbine #955-010-092AK (92A) #955-010-147AK (47M) #955-010-401AK (402M) #955-493-303AK 1" Long Side Mnt Ring 5E36B59. . .42.99 1300 Shotgun #955-010-425AK (416M)(54) #955-000-090AK (92A-S) #955-000-007AK Med. 1" Gloss 5E24U14 $ 28.00 Super X Rifle #955-010-054 AK(54) #955-010-054AK (54) SIDE MOUNT BASES Encore handgun & carbine #955-010-410AK (410) #955-000-008AK Med. 1" Matte 5E24U14 $ 28.00 #955-000-127AK (54M, 54M)* RIFLE MODEL STOCK # Omega Muzzleloader #955-010-410AK (410) #955-000-009AK High 1" Gloss 5E24U14 $ 27.99 ZB Small ring Mauser action #955-010-055AK (55) #955-010-046AK (46) ANSCHUTZ 1568 #955-010-001AK (1) Scout rifle & pistol #955-010-404AK (404) #955-000-010AK High 1" Matte 5E24U14 $ 28.00 22 #955-010-028AK (28) #955-010-024AK (24) CARCANO military action #955-010-001AK (1) System 1 & Blk Diamond 2 per package #955-010-411AK (411) #955-000-011AK X-High 1" Gloss 5E24U14 $ 28.00 Thunderhawk, Firehawk 2 per package #955-010-406AK (406) CIL 830 & 950, 950C #955-010-001AK (1) WEAVER TOP MOUNT BASE PRICES #955-000-012AK X-High 1" Matte 5E24U14 $ 28.00 TIKKA flat reciever #955-010-061AK (61) #955-010-061AK (61) — Advise # — 11, 12, 13, 17, 21, 22, 23, 24, 28, 29, 30, 42, COOEY 60, 600 #955-010-002AK (2) TRADITIONS Whitetail Hunter #955-010-161AK (61M) #955-010-161AK (61M) 43, 44, 71A, 84, 91, 402, 402M Model 71 #955-010-001AK (1) In-Line Buck Hunter #955-010-075AK (75) #955-010-075AK (75) Base 5E03A13...... $ 4.99 ENFIELD P 14/17 receiver cut like Remington 30 #955-010-001AK (1) VOERE 2150, 2165, Mauser action #955-010-045AK (45) #955-010-046AK (46) — Advise # — 14, 27, 32 Base 5E05A33...... 6.99 WEAVER H&R Models 65, 165, 150, 151, 250, 251, 264, 265, 365, 450, 550, #955-000-121AK (45M, 46M)* — Advise # — 15, 16, 18, 19, 20A, 25, 35, 35M, 35S, 36, WINDAGE ADJUSTABLE 755, 765, 852 #955-010-002AK (2) 2130 #955-010-028AK (28) #955-010-028AK (28) 36M, 40A, 40A-M, 45, 46, 46M, 46S, 47, HIGH STANDARD Mauser action #955-010-001AK (1) WEATHERBY Mark V Magnum #955-010-033AK (424) #955-010-035AK (35) 47M, 54, 55, 61, 61M, 68, 75, 76, 79, 83, SURE-GRIP RINGS JAPANESE Arisaka 6.5mm & 7.7mm #955-010-001AK (1) #955-010-034AK (424M) #955-010-135AK (35M) 85, 419M, 421M, 424, 424M, 427, 428 Vanguard 22-250, 224, 30-06 #955-010-036AK (36) #955-010-035AK (35) Base 5E03A57...... 4.99 Completely Adjustable, KRAG #955-010-002AK (2) #955-010-136AK (36M) #955-010-135AK (35M) — Advise # — 49A, 50, 53, 57, 58, 59, 62, 63B 74, 86, 87, 88, High-Strength Clamping Power MARLIN A1, 50, 39A round barrel, 80, 81, 88, 89, 98 #955-010-002AK (2) 93, 94, 95, 403, 414S Base 5E07A12. . . 8.99 Model 512 Slugmaster, 590 #955-010-010AK (10M) #955-000-117AK (36M, 35M)* High-quality, windage adjust- #955-000-118AK (36S, 35S)* — Advise # — 60A Base 5E10A62...... 12.99 MAUSER Models ZB, HVA Husqvarna w/rec. ring 1.3" dia. #955-010-001AK (1) — Advise # — 70, 92A Base 5E09C07...... 10.99 able rings feature steel caps with Vanguard F/extension #955-010-036AK (36) #955-010-040AK (40A) — Advise # — 81, 82, 90, Base 5E08U50...... 9.99 two hardened screws per side al- MOSSBERG 25, 26, 35, 40, 42, 43, 44, 45, 46, 46A, 46B, #955-010-002AK (2) #955-010-136AK (36M) #955-010-041AK (40A-M) — Advise # — 96, 97, 98, 413 Base 5E18X34. . . . . 21.99 low super strong clamping power 46M, 140, 142, 144, 146, 468T Others with FN Mauser actions #955-010-045AK (45) #955-010-046AK (46) — Advise # — 63B-S , 404, 405 Base 5E09Z43. . . . .10.99 and positive grip on your scopes. Both front and rear rings come REMINGTON 7, 30, 700 , 40-X, 600, 660, 721, 722 700ML LA/SA #955-010-001AK (1) #955-000-121AK (45M, 46M)* — Advise # — 406, 411, 418M Base 5E06Z48 . . . . . 7.99 with two fully adjustable base clamps that mount securely to Mod. 10, 11, 12, 12A, 25, 33, 34, 41, 121, 341, 513S, 513T, 514 #955-010-002AK (2) Lightweight U.S. made actions #955-010-036AK (36) #955-010-415AK (415) — Advise # — 410 Base 5E09Z32...... 13.99 Weaver-style rails with a unique, one-piece lug milled into the SAVAGE 20, 110, 111, 112, 116, 340, 342, 840, 842 #955-010-001AK (1) #955-010-136AK (36M) #955-010-416AK (415M) — Advise # — 414M Base 5E06Z64...... 7.99 base of each ring. Clamps can be tightened or loosened for both Models 3, 4, 5, 6, 7, 19, 23, 40, 45 , 219 #955-010-002AK (2) front and rear alignment so you can line your scope up perfectly WESTERNFIELD 730 #955-010-025AK (25) #955-010-011AK (11) — Advise # — 415, 415M Base 5E09Z43...... 10.99 SCHULTZ & LARSEN #955-010-001AK (1) 740 #955-010-063AK (63B) — Advise # — 416M, 417M, 423M Base 5E06Z91. . . .8.99 with the end of the barrel leaving the windage adjustment in ab SEARS Models 51L, 53 #955-010-001AK (1) #955-000-091AK (63B-S) — Advise # — 429M Base 5E07A60...... 8.99 your scope for precise sighting-in. SPECS: Aluminum lower; steel cap, 4 screws, windage adjust- Models 54, 100 #955-010-103AK (3B) 770 #955-010-055AK (55) #955-010-020AK (20A) — Advise # — *2-Piece Base Set 5E06A60...... 7.99 ment clamps. Allen wrench included. Black, gloss or matte finish. 1" SMITH & WESSON Mauser actions #955-010-001AK (1) 775, 780 #955-010-055AK (55) #955-010-055AK (55) — Advise # — **2-Piece Base Set 5E06A60 ...... 7.99 (2.5cm) diameter. Heights measured from top of base to bottom of SPRINGFIELD ‘03 #955-010-001AK (1) WINCHESTER ring. Med., .180" (.5cm); High, .350" (.8cm); X-High, .575" (1.5cm). 70 long and short action, H&H WEAVER STEVENS 110E, 325, 322 #955-010-001AK (1) mags above #1,896,476 #955-010-047AK (47) #955-010-046AK (46) NO-DRILL, NO-TAP MOUNT STOCK # HEIGHT SIZE FINISH PRICE Models 26, 53, 56, 57, 66, 76, 85, 416, 417, 418, 762, 872 #955-010-002AK (2) #955-010-147AK (47M) #955-010-146AK (46M) SYSTEM #955-000-111AK Med. 1" Gloss Blk 5E26A31 $ 30.99 STEVENS-SPRINGFIELD 840 #955-010-001AK (1) #955-000-125AK (47M, 46M)* #955-000-112AK Med. 1" Matte 5E26A31 $ 30.99 Models 83, 872 #955-010-002AK (2) 70 LA/SA above #1,896,476 F/ext #955-010-047AK (47) #955-010-402AK (402) Ready-To-Install Base & #955-000-113AK High 1" Gloss Blk 5E26A31 $ 30.99 WINCHESTER 54, 70 LA/SA, 670, 770 #955-010-001AK (1) 70 long action and H&H mags Ring System #955-000-114AK High 1" Matte 5E26A31 $ 30.99 Model 94 pre-’64 #955-010-303AK (3D) Model 94 post-‘64 #955-010-103AK (3B) above #1,896,426 #955-010-096AK (96) Compact, lightweight #955-000-115AK X-High 1" Gloss Blk 5E26A31 $ 30.99 70 Target, H&H mags Models 03, 47, 52, 57, 61, 63, 69, 69A, 72, 74, 75, 77 #955-010-002AK (2) mounts use existing holes #955-000-116AK X-High 1" Matte 5E26A31 $ 30.99 up to #1,896,476 #955-010-049AK (49A) #955-010-046AK (46) for simple, do-it-yourself Model 42 pump shotgun #955-010-002AK (2) 70 Target up to #1,896,476 F/ext #955-010-049AK (49A) #955-010-402AK (402) scope mounting. Every- WINDAGE ADJUSTABLE GRAND SLAM RINGS - Strong, all- ZB 22 #955-010-002AK (2) 70 WSSM #955-000-094AK (428) #955-010-046AK (46) thing needed is supplied; steel rings clamp securely to Weaver-style rails and two Torx — Advise # — 1, 2, 10M Base 5E15A05...... $ 17.99 03, 63 #955-010-019AK (19) #955-010-022AK (22) just add your scope. ab screws hold your scope rigidly in place. Windage adjustable ring #955-010-303AK 3D Side Mount Base 5E19Z40. . . .22.99 05, 07, 10, 95 #955-010-020AK (20A) #955-010-017AK (17) SPECS: Aluminum base, bases allow for increased left to right positioning on front and #955-010-103AK 3B Side Mount Base 5E16X03. . . .18.99 06, 62, 62A, 90 Octagon barrel #955-010-032AK (32) #955-010-032AK (32) steel rings; black or stainless rear alignment of rings and scopes while leaving the windage 3 5 adjustment on the scope for accurate fine-tuning at the range. 43 #955-010-018AK (18) #955-010-018AK (18) steel finish. Revolver System - Approx. 3 ⁄4" (9.5cm) long, ⁄8" (15.9 Rings also allow for perfect return to zero when remounting 47, 69A, 72 #955-010-012AK (12) #955-010-017AK (17) mm) thick, weighs 5 oz. (142 g) w/rings. Ruger Mini-14 System - 5" 5 1 (12.7cm) long, ⁄8" (15.87mm) thick, weighs 5 ⁄2 oz. (156g) w/rings. scopes. 52 hole spacing different #955-010-025AK (25) #955-010-057AK (57) SPECS: Steel. Black, gloss or matte finish. 1" (2.5cm) diameter. 52 hole spacing same #955-010-046AK (46) #955-010-046AK (46) BLACK STAINLESS Heights measured from top of base to bottom of ring. Med., .180" #955-010-146AK (46M) #955-010-146AK (46M) STOCK # STOCK # MODEL FITS (.5cm); High, .350" (.8cm); X-High, .575" (1.5cm). Torx wrench in- #955-012-046AK (46S) #955-012-046AK (46S) #955-300-001AK NA 301/301S Ruger® B’hawk®, Super B’hawk® cluded. #955-000-123AK (46M, 46M)* NA #955-300-012AK 302/302S Ruger Mini-14® Series 181-182 #955-000-096AK Rings, Medium, 1", Black 5E30U45. $ 35.99 #955-000-124AK (46S, 46S)* #955-300-004AK NA 304/304S Colt Python, Trooper, MK III #955-000-097AK Rings, High, 1", Black 5E30U45. . . .35.99 #955-000-098AK Rings, X-High, 1", Black 5E30U45. . .35.99 52C #955-010-085AK (85) #955-010-085AK (85) NA NA 307/307S S&W L & K w/adj. sights We've got a panel of experienced 57, 69 #955-010-012AK (12) #955-010-013AK (13) #955-000-099AK Rings, Medium, 1", Matte Blue, #955-300-013AK NA 314 Ruger Single-Six® gun techs to help answer all of your 60, 67, 68 #955-010-021AK (21) #955-010-021AK (21) 5E30U45...... 35.99 61 round barrel #955-010-019AK (19) #955-010-013AK (13) — Advise # — Black No-Drill Mount System, #955-000-100AK Rings, High, 1", Matte Blue, firearm related questions. 5E77Z00...... $ 89.99 5E30U45...... 35.99 — Advise # — SS No-Drill Mount System, #955-000-101AK Rings, X-High, 1", Matte Blue, Call us today - we are here to help! Winchester Top Mount Bases continued in next column 5E83P71...... 97.99 5E30U45...... 35.99 order on the web ROWNELLS Orders/Tech: 800-741-0015 www.brownells.com B . . . ONLY THE BEST . . . PAGE 263 WILLIAMS SIDE MOUNT & RINGS WEAVER WEAVER ADAPTER BASE WILCOX INDUSTRIES Solve Difficult TACTICAL SCOPE RINGS For Enfield, 10/22® & Grooved COMP-M MOUNT Scope Mounting Problems Receiver .22’s For Ultra-Secure Mounting Strong, Lightweight, Adjustable mounts attach Of Large-Objective Scopes One-piece mount allows use of Weaver Tactical Mount For Secure ba to the side of the receiver. rings on these guns. Attachment Of Comp Series Sights Exclusive, eccentric base Oversized rings provide extra SPECS: Aluminum, Blue. TO-10 Positions 1 7 bushing allows the rear ring contact area for ultra-secure scope further forward and ⁄4" (6.3mm) higher. Uses ⁄8"/1" Tip-Off Compact tactical mount securely positions 7 to be centered for maximum mounting of large optics on Mounts or ⁄8"/1" Top Mount Rings. TO-1 requires drilling and tap- an Aimpoint red dot optic the correct height 7 windage adjustment. ab hard-recoiling, long-range rifles ping of receiver. Note: ⁄8"= 22.2mm, 1"= 2.5cm. above a flattop receiver rail. Fits Aimpoint SPECS: Aluminum, black, anodized, bright finish. Bases - SM-70 such as sniper rifles. Fits all Weaver-style bases. Six no-strip, no- STOCK # FITS PRICE CompC3/M2/ML2/M3/ML3 series, 3XMAG slip Torx® screws hold down the ring cap to ensure the scope keeps magnifier, and other optics with 30mm tube that require single- fits centerfire rifles with left-hand receiver wall radius. SM-71 fits #955-200-001AK TO-1 Lee-Enfield 1, 4 or 5 5E15Z90 $ 18.99 most lever and bolt action rifles with a flat, left-hand receiver wall. its position even under heavy recoil. Oversize hex nuts allow ring mounting. Skeletonized construction provides full support ab #955-200-009AK TO-9 Blue Ruger® 10/22 5E04Z19 $ 6.99 rings & bases Lee Enfield Mount Plate for use with SM-70 base on round re- quick removal or attachment of optics in dynamic situations. without the weight of excess metal for an exceptionally strong, ceiver SMLE No.1 rifles. QC Split Rings - 1" (2.5cm) dia. Positions SPECS: Aluminum, hardcoat anodized, matte black. Height mea- #955-200-119AK TO-9-M Matte Ruger 10/22 5E04Z72 $ 5.99 solid, yet lightweight mount. Four, steel, hex-head cap screws scope to the left of the centerline of the bore. QC HCO Rings - 1" sured from top of base to underside of scope body. 1" High - .400" #955-200-010AK TO-10 .22 cal. rifles anchor the top ring half to the mount to ensure full contact with dia. High HCO and High Split rings have longer stud and .200" thick high. Accepts scopes with objectives up to 44mm dia. 1" Extra with grooved receivers 5E05Z00 $ 7.99 sight body to prevent slippage. Rail Grabber clamping system sub-ring base to accommodate large objective scopes. Positions High - .525" high. Accepts objectives up to 50mm dia. 30mm High secures the mount to receiver and maintains sight alignment the scope directly over the centerline of the bore. - .495" high. Accepts objectives up to 44mm dia. even under the battering of sustained rapid fire. Unique, captive #955-000-138AK 1" Tactical Rings, High 5E37A10. . $ 43.99 SAMSON MANUFACTURING CORP. cross-bolt is divided lengthwise; one side provides a slop-free fit MODEL FITS #955-000-139AK 1" Tactical Rings, Extra-High, in a MIL-STD 1913 Picatinny slot, while rotating the bolt a half SM-70 Mauser 91, 93, 94, 95, 96, 98**; Rem. 600, 660, 5E37A10...... 43.99 QUICK-FLIP MOUNT turn exposes the side that snugs into the narrower Weaver-type 700, 721, 722, 7; Savage 110, 111; Win. 54, 70, 670, 770; Wthby #955-000-140AK 30mm Tactical Rings, High, slot. An oversized thumb nut with deep grasping grooves lets the MK-V, Vanguard, British SMLE #1 (Round Receiver)*; BSA Majestic, 5E37A10...... 43.99 FOR AIMPOINT 3XMAG operator tighten the mount with hand pressure only; coin slot in Monarch, CF-2; Husqvarna Crown Grade; Interarms Mark X, Howa the head lets you apply additional tightening force with a U.S. 1500 ,1700; Japanese M38 (6.5), M99 (7.7)**; Mossberg 800, 3000; Flips Magnifier Aside For Instant nickel or quarter. ab P14/17 Enfield**; Swiss 1911 (7.5); U.S. Military 1903/1903A3. WEAVER SEE-THRU MOUNT RINGS Transition From Long-Range SPECS: Aluminum, hardcoat anodized, matte black finish. Height SM-71 Marlin 30AS, 36, 336, 93, 44, 444, 1895; British SMLE #4, For Weaver Bases To Close-Range Targeting measured from top of rail to bottom of scope tube: 1.120" (2.84cm). 5 (Flat Receiver); Remington 14, 141; Russian 1891 (7.62); Winchester 3.1 oz. (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3, 71, 86, 92, 94 (with FP or 5D sight), 95. Extra wide, oval design for instant Quick-transition mount combines secure, correct-height attachment of 3XMAG magnifier, and other optics that require a single 30mm * Must use Lee-Enfield #1 Mounting Plate with mount. use of either iron sights or scope. an Aimpoint 3XMag behind a com- ring mount. ** Must use Shim Pack with mount. Standard See-Thru or Extension #100-004-257AK Comp-M Mount 4B128X42. . . . $ 164.99 3 patible red dot sight with a spring- #962-070-070AK SM-70 Side Mount Base 2F40H02. $ 46.99 style that adds approx­imately ⁄4" #962-070-071AK SM-71 Side Mount Base 2F40H02. . . 46.99 (19mm) eye relief adjustment. Fit loaded mechanism that flips the #962-070-100AK Shim Pack 2F05H45...... 6.99 Weaver Top Mount Bases. Excel- magnifier aside for instant return to unmagnified operation of Extension Standard #962-000-003AK Lee-Enfield Mount Plate 2F13D73. .15.99 lent for mounting large objective sight. Lets you shift from long-range to short-range targeting #962-070-101AK QC Split Rings 2F22H01...... 25.99 diameter scopes, too. ab almost instantly. Securely installed to any MIL-STD 1913 Pica- Brownells /EOTECH #962-070-102AK QC HCO Rings 2F27H17...... 31.99 SPECS: Steel, satin blue (SB) or matte blue (MB) finish. For 1" tinny receiver rail with a robust locking bar and bolt system, so #962-070-103AK QC High Split Rings 2F22H95. . . .26.99 (2.5cm) scopes. Sold in pairs. the magnifier stays correctly positioned behind the sight. Mount CQB T -DOT HOLOGRAPHIC SIGHT bolts directly to the factory holes in the bottom of the 3XMag #962-070-104AK QC High HCO Rings 2F31H11...... 36.99 #955-495-100AK See-Thru Rings (SB) 5E24B45. . . $ 28.99 “T” Aiming Point #955-495-230AK See-Thru Rings (MB) 5E24B86. . . 28.99 (machine screws included)—no gunsmithing required. Ambi design allows installation with lever and flip path on the left Calibrated To Eliminate #955-495-500AK Ext. See-Thru Rings (SB), Guesswork In Close-Range WEAVER TOP MOUNT RINGS 5E28B48...... 33.99 or right side. Quick-flip tab has deep grooves for easy activation with a flick of your thumb. ab Targeting Now In Stainless Finish #955-495-101AK Ext. See-Thru Rings (MB), SPECS: Aluminum, hardcoat anodized, matte black. 5E30B74...... 36.00 The Brownells CQB T-Dot Heights: Low and Me- #100-004-239AK Quick-Flip Mount w/Bolt-On Base, #955-495-250AK Dual Extension See-Thru Rings (MB), Sight is designed for com- dium for scopes w/objective 1B146P94...... $ 195.99 5E33B64...... 39.99 bat and competition shoot- diameters to approximately ers who frequently address 1.75"(44.45mm). High for For more choices of SAMSON MFG. targets at close quarters. It objectives­ above 1.75". Ex- WEAVER SEE-THRU MOUNTS corrects a common problem tra High for scopes with MOUNTS visit brownells.com Integral Mount Lets You Use with combat-zeroed optics objectives up to 60mm. ab Both Iron Sight & Scope mounted on an AR-type SPECS: Aluminum lower; steel cap, screws, crossbolt and nut. rifle: the point of impact is Satin Blue, Matte Blue or brushed Stainless finish. Height (above SOG ARMORY Wide oval opening below the scope significantly lower than the Reticle accessories base): 1" diameter - Low, .090" (2.28mm); Med., .164" (4.16mm); allows fast, unrestricted use of iron point of aim at close quarters High, .332" (8.43mm); X-High, .560" (14.2mm). 30mm diameter - sights when you’re too close to use a AIMPOINT distances. Built by EOTech exclusively for Brownells and based & Low, .290" (7.3mm); High, .485" (12mm). 2 oz. (56 g). scope. All-steel, four screw top strap MOUNT on the popular EOTech EXPS2, the CQB T-Dot eliminates the STOCK # HEIGHT SIZE FINISH PRICE gives 210° surface contact for recoil- “guesstimating” when aiming at these targets. It retains the par- #955-490-001AK Low 1" Satin 5E24Z14 $ 28.00 proof strength. Integral aluminum base means lighter weight. Strong, Lightweight; ent design’s 65 MOA circle illuminated reticle with two aiming #955-490-003AK Low 1" Matte 5E24Z14 $ 27.99 Front and rear mounts interchange for greater eye relief. ab Standard & Offset Models points calibrated for 50-200 yards and 500 yards. The bottom optics SPECS: Aluminum lower half, steel top straps and screws. Satin of the T-Dot’s circle is left open, with a “T” indicating a precise #955-490-002AK Low 1" Stainless 5E36Z90 $ 42.99 blue finish. 1" (2.5cm) I.D. Overall height approx. 2" (5.1cm). 3 oz. Single-ring mounts of aiming reference zeroed for about 7 yards. All aiming points are #955-490-201AK Med. 1" Satin 5E24Z14 $ 27.99 (85 g) wt. per pair. strong, lightweight aluminum secure your Aimpoint or similar calibrated for 5.56mm NATO ammunition. Windage and eleva- aiming device to any Picatinny or Weaver-style rail. Extra-large #955-490-203AK Med. 1" Matte tion are adjustable in ½ MOA increments. 5E24Z14 $ 28.00 STOCK # FITS PRICE ring surface area ensures zero scope movement under recoil, #955-490-111AK Med. 1" Stainless 5E36Z90 $ 42.99 #955-401-713AK Marlin 336 5E12A97 $ 15.99 with six Torx T-15 screws (wrench included) securing the ring The CQB T-Dot clamps directly to a MIL-STD 1913 Picatinny #955-490-301AK High 1" Satin 5E24Z14 $ 28.00 #955-401-712AK Rem. 700 5E12A97 $ 15.99 halves. A cross-bolt with integral recoil lug and .510" diameter rail (only 2 ¾" rail space required) with a built-in quick-detach hex nut anchor mount to the rail. Standard model elevates the throw-lever mount. A built-in riser enables lower one-third co- #955-490-303AK High 1" Matte 5E24Z14 $ 28.00 #955-401-714AK Rem. 4, 6, 7400, 7600 5E12A97 $ 15.99 sight to the correct height to co-witness with a back-up iron witness with A2-type iron sights. The reticle has 20 brightness #955-490-302AK High 1" Stainless 5E36Z90 $ 42.99 #955-401-715AK Rem. 742, 740, 760 5E12A97 $ 15.99 sight. Cut-out in the base reduces weight without sacrificing settings selected using the control buttons on the left side and #955-490-401AK X-High 1" Satin 5E24Z14 $ 27.99 #955-401-723AK Ruger 77/22® & Ranch 5E33A64 $ 39.99 strength. Cantilever-style Offset model provides co-witness el- is powered by one CR-123 lithium battery (included), easily ac- #955-490-403AK X-High 1" Matte 5E24Z14 $ 28.00 evation and positions sight 1¼" forward to make room for a rear- cessed through the side cap. Sealed, non-magnifying optics are #955-491-210AK Low 30mm Matte 5E24Z86 $ 28.99 mount night vision device. Both models accept 30mm diameter fogproof, shatter-resistant, and anti-glare coated. scope tubes; aluminum reducer included for mounting a 1" tube. SPECS: Aluminum housing, hardcoat anodized, matte black. 3.5" #955-491-200AK High 30mm Matte 5E24Z86 $ 28.99 SPECS: Aluminum, hardcoat anodized, matte black. Steel Torx long x 2.4" wide x 2.8" high. 11.2 oz. (317g) wt. Windage and eleva- TOP MOUNT EXTENSION RINGS - #955-490-500AK High 1" Satin 5E28Z93 $ 33.99 screws cross-bolt, oxide finish, black. Fits 30mm and 1" diameter tion adjustment range +/- 40 MOA in ½ MOA clicks (½" at 100 yards). Extension Top Mount Rings, 1" and #955-490-503AK High 1" Matte 5E28Z93 $ 33.99 sights. Standard – 1" (2.5cm) long, 1" high from top of base to Brightness adjustment range: 146,000:1, brightest to lowest. 20 3 3 30mm diameter. Moves eye relief ⁄4", #955-490-610AK Hi-Dual 1" Satin 5E31Z03 $ 36.00 bottom of ring. Offset – 3 ⁄8" (8.6cm) long, 1" high from top of base brightness settings. Uses one (1) CR-123A lithium battery; approx. forward or backward. Sold by the pair, 1 #955-490-450AK Hi-Dual 1" Matte 5E31Z03 $ 35.99 to bottom of ring. 600 hour battery life. Operating temperature range -40° to +150° F. standard and 1 extension ring or “Dual” #100-003-048AK Standard Mount 9A47Y95 . . . . $ 59.95 Submersible to 10 ft depth. style with two extension rings. #955-000-079AK High 30mm Matte 5E35U10 $ 40.99 #100-003-047AK Offset Mount 9A63Y95...... 79.95 #080-000-971AK CQB T-Dot Sight 9K00HDZ . . . $ 549.99 ROWNELLS SATISFACTION GUARANTEED B . . . ONLY THE BEST . . . PAGE 264 SINCE 1939 Office/Tech: 641-623-5401