Versa-Pod® target=_blank

http://www.acp-waffen.de/frameset.php?site_id=1 Keng's Specialty, Inc. © 2010 www.versa-pod.com Versa-Pod® is Quality and Innovation QUALITY means superior materials are used throughout Quality means that there are 18 TIG welds in every Versa-Pod . Un- like our competition, we don't simply make idle claims about being durable - we give you proof. The proof is in the way we build our .

target=_blank

304 STAINLESS STEEL - Solid There are 5 welds on each lower leg Each leg section is press-fit 304 stainless castings are used band, ensuring it will never separate into the upper leg housing and at critical stress points like the from the bipod leg then permanently secured by 4 knuckle joint. TIG welds Our competitors use fabricated sheetmetal construction.

SOLID LEGS - POSITIVE LOCKING - On our bipods, the legs are Our designs all use positive machined from solid metal locking notches. The load that (aluminum or steel), not the leg is able to sustain is 15 hollow, bent sheetmetal times greater than that of de- like on our competitor's signs which use a friction-type bipods. You won't locking mechanism. get that "springy" feel when you take your shot.

SUPERIOR DIE CASTINGS - Compare and see the difference Aluminum alloy parts are yourself - when our competitors die-cast of AL14130 using make bipods which they claim to pressures upwards of 30,000 have "positive locking" legs, the PSI. This ensures parts that SOLID STEEL LATCHES - legs have radial grooves which are essentially porosity-free The locking latches are wire-EDM cut are lathe turned, simple and yet lightweight. cheap - but weakens the entire from solid blocks of 4140 chrome- leg. Our locking notches are indi- moly steel. Our latches are un- vidually machined ONLY where matched for strength and precision. the latch locks the leg - more expensive, but much stronger. NYLON 66 - We don't cut corners and neither Reinforced Nylon 66 is extremely tough, should you. able to withstand temperatures ranging from -13° F (- 25° C) to 302° F (140° C). Reinforced fibers mean parts that are nearly impossible to break. All Versa-Pod products are covered by our Limited Lifetime Warranty against defects in materials and workmanship.http://www.acp-waffen.de/frameset.php?site_id=1 See packaging for warranty detail  www.versa-pod.com Keng's Firearms Specialty, Inc. © 2010 INNOVATION means new features never before offered on one bipod

TILT AND PAN CONTROL All Versa-Pod® bipods have built-in tilt and pan movements - essential for making shots on real-world targets under actual conditions. The all-new 50-Series Versa-Pod® bipods have an additional friction lock feature (patent pending) that enables the user to limit the amount of tilt/pan movement desired, or to lock down the movements altogether. target=_blank

AXIAL ROTATION (CANT) CONTROL The ability to quickly correct for uneven ground is crucial for making a first-shot hit - yet most bipods don't offer this important feature. All Versa-Pod® bipods have built-in cant correction. The all-new 50-Series Versa-Pod® bipods feature a new friction lock mechanism (patent pending) operated by the shooter's non-shooting hand, so it's now possible to limit the degree of cant rotation, or to lock it down completely.

SPRING-POWERED LEGS When you're in the prone or sitting position, raising your even an inch SET-UP ON ANY SURFACE, INSTANTLY or two is often difficult. Some bipods make All Versa-Pod® bipods have built-in cant correction, coupled this task even harder by making the shooter with one-touch operation leg latches for extremely fast shot pull out the legs against spring tension. The set-up on just about any surface, under any conditions. all-new Versa-Pod® 50-Series bipods all come with spring-powered legs that make it easier to elevatehttp://www.acp-waffen.de/frameset.php?site_id=1 your rifle when you are prone or sitting. Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com  ALL NEW! Versa-Pod® 50-Series Bipods with Friction Lock Controls Prone Models

(150-100)

Versa-Pod® Model 52 Bipod Patent Pending Elevates centerline of bore from 9target=_blank inches fully retracted Standard Prone Bipod with Pan/Tilt and Cant to 12 inches fully extended. Weight: 1.28 lbs (0.54 Kg) / Friction Lock Model 150-052 1.68 lbs (0.76 Kg) with Universal Mounting Adapter The classic prone-length Versa-Pod®, now with added friction lock control for the tilt/pan and cant rotation. Now you can use the built-in movements to follow targets in motion or tighten down for sighting in at the range all with the same bipod. Also featuring spring-powered legs for quicker, easier adjustments. Adjusts from 9 inches to 12 inches in six increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).

(150-100)

Versa-Pod® Model 51 Bipod Patent Pending Elevates centerline of bore from 7 inches fully retracted Short Prone Bipod with Pan/Tilt and Cant to 9 inches fully extended. Weight: 1.18 lbs (0.54 Kg) / Friction Lock Model 150-051 1.58 lbs (0.72 Kg) with Universal Mounting Adapter A never-before offered short prone bipod from Versa-Pod®. For shooters who prefer to be a little lower to the ground when shooting from the prone position. Also the ideal length when shooting from a bench or the hood of a vehicle. Same friction lock controls and spring-powered legs as 150-052. Adjusts from 7 inches to 9 inches in five increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).

(150-100)

Versa-Pod® Model 50 Bipod Patent Pending Elevates centerline of bore from 5 inches fully retracted Super Short Prone Bipod with Pan/Tilt and Cant to 7 inches fully extended. Weight: 1.10 lbs (0.5 Kg) / Friction Lock Model 150-050 1.50 lbs (0.68 Kg) with Universal Mounting Adapter The specialist's bipod - one of shortest bipods on the market. Developed at the request of professional snipers who need to be as close to the ground as possible. Extremely quick to use and easy to carry, yet utilizing the same rugged construction as all Versa-Pod bipods. Same friction lock controls and spring-powered legs as 150-052. Adjusts from 5 incheshttp://www.acp-waffen.de/frameset.php?site_id=1 to 7 inches in three increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100).  www.versa-pod.com Keng's Firearms Specialty, Inc. © 2010 ALL NEW! Versa-Pod® 50-Series Bipods with Friction Lock Controls Sitting Models

(150-100)

target=_blank

Versa-Pod® Model 53 Patent Pending Elevates centerline of bore from 15 1/2 inches fully retracted to 23 3/4 inches fully extended Standard Sitting Position Bipod with Pan/Tilt Weight: 1.58 lbs (0.72 Kg) / 1.96 lbs (0.89 Kg) with and Cant Friction Lock Model 150-053 Universal Mounting Adapter Like the Model 3 in every way, but with newly added friction lock controls for the tilt/pan movement and axial rota- tion. Both controls are operated by the off hand, so there is no interference with the actual firing of the rifle. Spring- powered legs need only 1/3 the amount of time that traditional gravity pull legs to deploy to proper height. Adjusts from 15 1/2 inches to 23 3/4 inches in twelve increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100)

(150-100)

Versa-Pod® Model 54 Patent Pending Elevates centerline of bore from 20 inches fully Extended Length Sitting Position Bipod with retracted to 31 inches fully extended Weight: 2.0 lbs (0.91 Kg) / 2.38 lbs (1.08 Kg) with Pan/Tilt and Cant Friction Lock Model 150-054 Universal Mounting Adapter Another never-before offered length from Versa-Pod®. A bipod for use while sitting in a folding chair or hunting stool. Has the same friction lock controls for the tilt/pan movement and axial rotation as other 50-Series bipods. Spring-powered legs take less than a second to deploy to their maximum length. Adjusts from 20 inches to 31 inches in sixteenhttp://www.acp-waffen.de/frameset.php?site_id=1 increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100). Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com  Classic Versa-Pod® Models Elevates centerline of bore from 9 inches fully retracted to 12 inches (150-100) fully extended

Versa-Pod® Model 2 Bipod Standard Prone Bipod / Non-Marring Rubber Feet Model 150-002 Steel/Aluminum Alloy Weight: 1.04 lbs (0.47 Kg) / 1.44 lbs (0.65 Kg) with Universaltarget=_blank Mounting Adapter Model 160-002 All-Steel Construction Weight: 1.48 lbs (0.68 Kg) / 1.90 lbs (0.86 Kg) with Universal Mounting Adapter The foundation of the Versa-Pod® line since its introduction in 1995. Has built-in pan and tilt movements to enable tracking of targets moving simultaneously in two planes. Also has built-in axial rotation for quick corrections on uneven ground. One-touch operation to extend legs, adjusts from 9 inches to 12 inches in six increments. Non-mar- ring rubber feet. Includes one Universal Mounting Adapter (150-100). Elevates centerline of bore from 9 inches fully retracted to 12 (150-100) inches fully extended

Versa-Pod® Model 150-001 bipod shown on Colt® AR-15® Model SP1 Rifle with optonal 150-101 adapter Versa-Pod® Model 1 Bipod Standard Prone Bipod / Ridged Metal Feet Model 150-001 Steel/Aluminum Alloy Weight: 1.04 lbs (0.47 Kg) / 1.44 lbs (0.65 Kg) with Universal Mounting Adapter Model 160-001 All-Steel Construction Weight: 1.58 lbs (0.72 Kg) / 2.0 lbs (0.91 Kg) with Universal Mounting Adapter Same as Model 2 in all respects, except ridge metal feet work better in sand or on wet ground. Ideal for tactical used in non-urban environments. All-steel model (160-001) is recommended on rifles chambered for .300 Winchester Magnum and larger. Adjusts from 9 inches to 12 inches in six increments. Includes one Universal Mounting Adapter (150-100).

Elevates centerline of (150-100) bore from 15 1/2 inches fully retracted to 23 3/4 inches fully extended

Versa-Pod® Model 3 Bipod Standard Sitting Position Bipod / Non Marring Rubber Feet Model 150-003 Weight: 1.40 lbs (0.64 Kg) / 1.80 lbs (0.82 Kg) with Universal Mounting Adapter The classic sitting position bipod. One of the best-selling sitting position bipods on the market today. The built-in pan and tilt movements allow the shooter to track small game moving simultaneously in two planes. The axial rotation feature allows for quick corrections when setting up on uneven ground - no need to fiddle with the length of each leg. One touch operation to extend legs into position. Adjusts from 15 1/2 inches to 23 3/4 inches in twelve increments. Non-marringhttp://www.acp-waffen.de/frameset.php?site_id=1 rubber feet. Includes one Universal Mounting Adapter (150-100).  www.versa-pod.com Keng's Firearms Specialty, Inc. © 2010 PRONE POSITION BIPODS / SPECIAL MODELS

Versa-Pod® Model 2 with UIT Rail Adapter Model 150-032 Versa-Pod® Model 2 supplied with UIT Rail Adapter (150-601) Weight: 1.48 lbs (0.67 Kg) All other specifications same as 150-002.

Versa-Pod® Model 1 with UIT Rail Adaptertarget=_blank Model 150-031 Versa-Pod® Model 1 supplied with UIT Rail Adapter (150-601) Weight: 1.48 lbs (0.67 Kg) All other specifications same as 150-001

Versa-Pod® Model 2 with M16A2 Adapter Model 150-013 Versa-Pod® Model 2 supplied with M16A2 Handguard Adapter (150-116) Weight: 1.48 lbs (0.67 Kg) All other specifications same as 150-002 (150-200) Versa-Pod® Model 20 Bipod / Tactical Model Short Prone Bipod / Ridged Metal Feet / Spring-Powered Legs Model 150-020 Steel/Aluminum Alloy Construction Weight: 1.0 lb (0.46 Kg) / 1.40 lbs (0.64 Kg) with Universal Mounting Adapter Shorter than the Model 1 Bipod, adjusts from 7 inches to 9 inches in four incre- ments. Addition of internal springs makes deployment of the legs much faster than gravity pull on standard bipods. Also makes height adjustments much easier when Elevates centerline of bore in prone position. Includes one Universal Mounting Adapter (150-200) from 7 inches fully retracted to 9 inches fully extended

Versa-Pod® Model 49 Bipod Patent Pending Super Short Prone Bipod with Pan/Tilt and Cant Friction Lock, Tactical Model (150-200) Model 150-049 ALL NEW! Weight: 1.10 lbs (0.5 Kg) / 1.56 lbs (0.71 Kg) with Universal Mounting Adapter. A tactical version of our super-short Model 50 bipod. Developed at the request of pro- fessional snipers who need to keep as close to the ground as possible. New 50-series head offers full friction lock control of pan, tilt and axial rotation. Amazingly compact and easy to carry, yet has all of the features and rugged construction of our standard- length bipods. The rugged ridged aluminum foot is die-cast around the bipod leg, with concentric grooves designed to “grip” the foot onto the leg, making it almost impos- sible to break off. Suitable for a wide variety of terrain under all conditions. Adjusts from 5 inches to 7 inches in three increments. Includes one http://www.acp-waffen.de/frameset.php?site_id=1Tactical Universal Mounting Adapter (150-200) Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com  The Versa-Pod® system has many adaptersMOUNTING that enhance the ADAPTERSVersa-Pod® adapters are designed to look and feel like they are an utility of your bipod. All adapters are designed to be easy-to-install original part of your rifle, not an add-on. The same superior mate- and do not require any modification to the basic . rials and attention to detail goes into each adapter as on our bipods.

Universal Mounting Adapter Model 150-100 Weight: 0.38 lbs. (0.17 kgs) Fits all standard rifle stocks fitted with Uncle Mike's®-type Q.D. stud. A freely-rotating Q.D. stud is mounted on the bottom of knurled nut for sling mounting target=_blank Universal Mounting Adapter, Installs in seconds without tools. No Tactical Model modifications to necessary. Model 150-200 Weight: 0.44 lbs. (0.20 kgs) Same as 150-100 except equipped with push-button release 1 5/8" sling loop for use with 1 1/4" and 1 1/2" slings.

UIT Rail Adapter Model 150-601 Weight: 0.4 lbs. (0.20 kgs) Fits rifles equipped with UIT rail (also referred to as Anschutz® rail) in forend. Common examples: Steyr® SSG PII, Savage® Model 12 VSS, Blaser® R 93 LRS 2.

Freeland Rail Adapter Model 150-602 Weight: 0.45 lbs. (0.20 kgs) Fits American-made rifles using the Freeland™ pattern rail. ® Common example: McMillan Note: 150-601 adapter shown on stock Fiberglass stocks. with factory-fitted UIT rail, 150-602 Freeland@ rail adapter installs in the same manner but is not interchangeable Accessory 1 5/8" Sling Loop Model 150-701 Weight: 0.06 lbs. (0.03 kgs) Fits different brands of stocks and other accessories equipped with flush-cap mountings. Secure push-button release.

Stud for Embedding into Gunstock Model 150-108 Weight: 0.26 lbs. (0.12 kgs) 4 1/2 inch length with concentric http://www.acp-waffen.de/frameset.php?site_id=1grooves for epoxying into stock.  www.versa-pod.com Keng's Firearms Specialty, Inc. © 2010 GUN-SPECIFIC ADAPTERS Accuracy International® Adapter Model 150-808 Weight: 0.38 lbs. (0.17 kgs) Fits all Accuracy International® rifles and chassis-type stocks. Precisely engineered rear view for a flawless fit. Allows any bipod from the Versa-Pod® system to be used, also com- front view patible with Parker-Hale® bipods.

Clip-on Adapter for M16A1/A2 Bayonet Lug Model 150-101 150-101 Adapter shown on Weight: 0.18 lbs. (0.08 kgs) Colt® AR-15® Model SP1 Fits all M16-type rifles with bayonet lug. Attaches in place of M7 or M9 bayonet. Will also fit other riflestarget=_blank that use the standard M16 bayonet like the Ruger® Mini-14 GB

150-101 Adapter shown on Springfield Armory® M1A Adapter Ruger® Mini-14 GB Model Model 150-102 Weight: 0.10 lbs. (0.05 kgs) Fits Springfield Armory® M1A rifles and other U.S.-made M14-type rifles with U.S.- thread gas block. Will not fit M14 rifles with metric-thread gas blocks. 150-102 Adapter shown on Springfield® M1A® Ruger® Mini-14® Adapter Model 150-103 Weight: 0.20 lbs. (0.17 kgs) Fits Ruger® Mini-14® (not GB Model) and Mini-30® rifles. Longer 8-36 hex head screws (included) replace the two rearmost gas block screws. 150-103 Adapter shown mounted on Ruger® Mini-14 Heckler & Koch® Model 91/93 Adapter Model 150-105 Weight: 0.24 lbs. (0.09 kgs) Fits the factory-supplied wide forend with bipod attachment slot on Heckler & Koch® Models 91 and 93. Will not fit slimline G3-type forends.

150-105 Adapter shown mounted on Heckler & Koch® Model 93 Remington® 870 Adapter Model 150-106 Weight: 0.30 lbs. (0.14 kgs) Replaces the magazine cap on tubular magazine of Remington® Model 870 and Model 1100 shotguns. Note: should not be used in conjunction with extended magazines.

M16A2 Handguard Adapter Model 150-116 Weight: 0.44 lbs. (0.20 kgs) Fits the A2-style lower handguard through rearmost ventilation hole. Will not damage 150-116 Adapter shown mounted heat shield. Note: will not work with M4-spec http://www.acp-waffen.de/frameset.php?site_id=1on Colt® AR-15A2® Sporter II with double heat shields. Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com  ADAPTERS All Versa-Pod Picatinny rail adapters are designed specifically to fit the U.S. Military's MIL-STD-1913 pattern rail. The steel dovetail blocks are wire-EDM cut for a precise fit.

target=_blank Model 150-618 Model 150-658 Model 150-698 Standard Version Limited Axial Rotation Version Vertical Foregrip Only Weight: 0.88 lbs. (0.40 kgs) Weight: 0.88 lbs. (0.40 kgs) Weight: 0.82 lbs. (0.37 kgs) New, reduced-size vertical foregrip adapter Like 150-618 adapter, but with larger By popular demand, uses the same for the RAS forend-equipped and 9.4mm stud that eliminates the axial sturdy attachment mechanism as on other weapons equipped with MIL-STD-1913 rotation feature on all Versa-Pods. our 150-618 and 150-658 adapters, rail forends. Standard 6.3mm stud allows for Also features embedded flush-caps but without the Versa-Pod bipod spigot. full range of axial rotation on all Versa-Pod on both sides. Made of PA66 mate- Features embedded flush-caps on both bipods. New feature: embedded flush-caps rial, which is heat-resistant to more sides. Made of PA66 material, which is on both sides provide additional attachment than 300° F and is super-tough (30% heat-resistant to more than 300° F and is points for slings. Made of PA66 material, which glass fiber reinforced) super-tough (30% glass fiber reinforced) is heat-resistant to more than 300° F and is super-tough (30% glass fiber reinforced)

MIL-STD-1913 (Picatinny) Rail Adapter, Handrest Type Model 150-603 Weight: 0.54 lbs. (0.24 kgs) A smaller adapter for those who don't need a full vertical foregrip. New feature: embedded flush-caps on both sides to provide additional attachment points for slings.

MIL-STD-1913 (Picatinny) Rail Adapter, Clip-On Type Dovetail block slides onto standard MIL- Model 150-611 Weight: 0.30 lbs. (0.14 kgs) STD-1913 rail and is retained with solid Even more compact than the 150-603, totally elimi- steel square pin. No tools required for nates the Nylon 66 hardware. Tightens onto Picatinny installation or removal. Can be easily rail using 1/2" hex head nut. Nut is non-removable to re-positioned anywhere along the length prevent loss. of rail.

MIL-STD-1913 (Picatinny) Rail Adapter, Vertical Grip Type Model 150-616 Standard Version Weight: 0.86 lbs. (0.39 kgs) Model 150-656 Limited Axial Rotation Version (not pictured) Weight: 0.86 lbs. (0.39 kgs) http://www.acp-waffen.de/frameset.php?site_id=1 10 www.versa-pod.com Keng's Firearms Specialty, Inc. © 2010 PICATINNY RAIL BIPODS Versa-Pod® Model 2 with MIL-STD-1913 Rail Adapter Model 150-462 Versa-Pod® Model 2 supplied with MIL-STD-1913 (Picatinny) Rail Adapter (150-603) Weight: 1.5 lbs (0.68 Kg) All other specifications same as 150-002 Versa-Pod® Model 2 with MIL-STD-1913 Rail Vertical Grip Adapter Model 150-480 target=_blank Versa-Pod® Model 2 supplied with MIL-STD-1913 (Picatinny) Rail Vertical Grip Adapter (150-616) Weight: 1.9 lbs (0.86 Kg) All other specifications same as 150-002

Lightweight Picatinny Rail Bipod with Lightweight Picatinny Rail Bipod with Rubber Feet Raptor Feet Model 150-925 ALL NEW! Model 150-923 ALL NEW! Weight: 0.98 lbs. (0.45 kgs) Elevates center- Weight: 1.02 lbs. (0.46 kgs) Elevates line of bore from 7 inches fully retracted to 9 centerline of bore from 7 inches fully inches fully extended. Same as the 150-923 retracted to 9 inches fully extended. bipod, except with non-skid, no-marring Exactly like the RD-923 bipod that rubber feet. Spring-powered legs. we supplied to the U.S. military, except that the legs on this ver- sion are not spring-powered. Raptor Heavy-Duty Picatinny Rail Bipod with Rubber Feet feet function superbly under all types of condi- tions and in different terrain. Model 180-MZ-251 ALL NEW! Weight:1.46 lbs. (0.66 kgs) Elevates cen- terline of bore from 7 inches fully retracted Heavy-Duty Picatinny Rail Bipod with Raptor to 9 inches fully extended. Same as the Restricted Military Sales Only Feet 180-MZ-091 bipod except with non-skid, Model 180-MZ-091 ALL NEW! no-marring rubber feet. Spring-powered Weight: 1.96 lbs. (0.89 kgs) Elevates legs. Large knurled tensioning knob to centerline of bore from 9 inches fully control tilt and pan movements. retracted to 12 inches fully extended. Designed for full-time use on the RAS forend equipped M249 SAW. All steel construction. Non quick-detachable mechanism. Attaches to MIL-STD- 1913 rail with two 10-32 machine Large, easy-to-use knurled knob screws. Spring-loaded legs. Large knurled ten- allows for total control of pan and sioning knob to control tilt and pan movements. tilt movements with off hand.

Versa-Pod® 150-923 bipod shown mounted on Springfield Armory® Forward-Mounted MIL-STD-1913 M1A® with 150-807 rail installed (Picatinny) Rail for M14/M1A® Versa-Pod® Model 51 bipod shown mounted on http://www.acp-waffen.de/frameset.php?site_id=1Model 150-807 Springfield Armory® M1A ® using 150-603 Adapter with 150-807 rail. 150-611 adapter can also be used Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com 11 Versa-Pod®

target=_blank

Versa-Pod Model 150-052 bipod shown on Accuracy International® Model AW-308 rifle with 150-808 Versa-Pod® to Accuracy International adapter.

OEM INQUIRIES WELCOME We are suppliers of high-quality bipods to various military forces, government agencies and companies throughout the gun industry. Contact us with your requirements and we will work with Versa-Pod® Model 150-052 bipod you to design and build the perfect shown on Rock River Arms® DEA bipod for your company's needs. Carbine with 150-603 adapter.

® Versa-Pod is manufactured by: Keng's Firearms Specialty, Inc. 875 Wharton Drive, SW Tel. (404) 691-7611 P.O. Box 44405 FAX (404) 505-8445 Atlanta, GA 30336-1405 E-mail: [email protected] U.S.A. www.versa-pod.com Versa-Podhttp://www.acp-waffen.de/frameset.php?site_id=1 and the Versa-Pod logo are registered trademarks of Keng's Firearms Specialty, Inc. All other trademarks used in this catalog belong to their respective owners. Specifications and availability are subject to change without prior notice. Not responsible for typographical errors. Versa-Pod products are manufactured under one or more of the following U.S. patents: 5,711,103 5,815,974 Other patents pending Printed in U.S.A.