Versa-Pod® target=_blank http://www.acp-waffen.de/frameset.php?site_id=1 Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com Versa-Pod® is Quality and Innovation QUALITY means superior materials are used throughout Quality means that there are 18 TIG welds in every Versa-Pod bipod. Un- like our competition, we don't simply make idle claims about being durable - we give you proof. The proof is in the way we build our bipods. target=_blank 304 STAINLESS STEEL - Solid There are 5 welds on each lower leg Each leg section is press-fit 304 stainless castings are used band, ensuring it will never separate into the upper leg housing and at critical stress points like the from the bipod leg then permanently secured by 4 knuckle joint. TIG welds Our competitors use fabricated sheetmetal construction. SOLID LEGS - POSITIVE LOCKING - On our bipods, the legs are Our designs all use positive machined from solid metal locking notches. The load that (aluminum or steel), not the leg is able to sustain is 15 hollow, bent sheetmetal times greater than that of de- like on our competitor's signs which use a friction-type bipods. You won't locking mechanism. get that "springy" feel when you take your shot. SUPERIOR DIE CASTINGS - Compare and see the difference Aluminum alloy parts are yourself - when our competitors die-cast of AL14130 using make bipods which they claim to pressures upwards of 30,000 have "positive locking" legs, the PSI. This ensures parts that SOLID STEEL LATCHES - legs have radial grooves which are essentially porosity-free The locking latches are wire-EDM cut are lathe turned, simple and yet lightweight. cheap - but weakens the entire from solid blocks of 4140 chrome- leg. Our locking notches are indi- moly steel. Our latches are un- vidually machined ONLY where matched for strength and precision. the latch locks the leg - more expensive, but much stronger. NYLON 66 - We don't cut corners and neither Reinforced Nylon 66 is extremely tough, should you. able to withstand temperatures ranging from -13° F (- 25° C) to 302° F (140° C). Reinforced fibers mean parts that are nearly impossible to break. All Versa-Pod products are covered by our Limited Lifetime Warranty against defects in materials and workmanship.http://www.acp-waffen.de/frameset.php?site_id=1 See packaging for warranty detail 2 www.versa-pod.com Keng's Firearms Specialty, Inc. © 2010 INNOVATION means new features never before offered on one bipod TILT AND PAN CONTROL All Versa-Pod® bipods have built-in tilt and pan movements - essential for making shots on real-world targets under actual conditions. The all-new 50-Series Versa-Pod® bipods have an additional friction lock feature (patent pending) that enables the user to limit the amount of tilt/pan movement desired, or to lock down the movements altogether. target=_blank AXIAL ROTATION (CANT) CONTROL The ability to quickly correct for uneven ground is crucial for making a first-shot hit - yet most bipods don't offer this important feature. All Versa-Pod® bipods have built-in cant correction. The all-new 50-Series Versa-Pod® bipods feature a new friction lock mechanism (patent pending) operated by the shooter's non-shooting hand, so it's now possible to limit the degree of cant rotation, or to lock it down completely. SPRING-POWERED LEGS When you're in the prone or sitting position, raising your rifle even an inch SET-UP ON ANY SURFACE, INSTANTLY or two is often difficult. Some bipods make All Versa-Pod® bipods have built-in cant correction, coupled this task even harder by making the shooter with one-touch operation leg latches for extremely fast shot pull out the legs against spring tension. The set-up on just about any surface, under any conditions. all-new Versa-Pod® 50-Series bipods all come with spring-powered legs that make it easier to elevatehttp://www.acp-waffen.de/frameset.php?site_id=1 your rifle when you are prone or sitting. Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com 3 ALL NEW! Versa-Pod® 50-Series Bipods with Friction Lock Controls Prone Models (150-100) Versa-Pod® Model 52 Bipod Patent Pending Elevates centerline of bore from 9target=_blank inches fully retracted Standard Prone Bipod with Pan/Tilt and Cant to 12 inches fully extended. Weight: 1.28 lbs (0.54 Kg) / Friction Lock Model 150-052 1.68 lbs (0.76 Kg) with Universal Mounting Adapter The classic prone-length Versa-Pod®, now with added friction lock control for the tilt/pan and cant rotation. Now you can use the built-in movements to follow targets in motion or tighten down for sighting in at the range all with the same bipod. Also featuring spring-powered legs for quicker, easier adjustments. Adjusts from 9 inches to 12 inches in six increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100). (150-100) Versa-Pod® Model 51 Bipod Patent Pending Elevates centerline of bore from 7 inches fully retracted Short Prone Bipod with Pan/Tilt and Cant to 9 inches fully extended. Weight: 1.18 lbs (0.54 Kg) / Friction Lock Model 150-051 1.58 lbs (0.72 Kg) with Universal Mounting Adapter A never-before offered short prone bipod from Versa-Pod®. For shooters who prefer to be a little lower to the ground when shooting from the prone position. Also the ideal length when shooting from a bench or the hood of a vehicle. Same friction lock controls and spring-powered legs as 150-052. Adjusts from 7 inches to 9 inches in five increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100). (150-100) Versa-Pod® Model 50 Bipod Patent Pending Elevates centerline of bore from 5 inches fully retracted Super Short Prone Bipod with Pan/Tilt and Cant to 7 inches fully extended. Weight: 1.10 lbs (0.5 Kg) / Friction Lock Model 150-050 1.50 lbs (0.68 Kg) with Universal Mounting Adapter The specialist's bipod - one of shortest bipods on the market. Developed at the request of professional snipers who need to be as close to the ground as possible. Extremely quick to use and easy to carry, yet utilizing the same rugged construction as all Versa-Pod bipods. Same friction lock controls and spring-powered legs as 150-052. Adjusts from 5 incheshttp://www.acp-waffen.de/frameset.php?site_id=1 to 7 inches in three increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100). 4 www.versa-pod.com Keng's Firearms Specialty, Inc. © 2010 ALL NEW! Versa-Pod® 50-Series Bipods with Friction Lock Controls Sitting Models (150-100) target=_blank Versa-Pod® Model 53 Patent Pending Elevates centerline of bore from 15 1/2 inches fully retracted to 23 3/4 inches fully extended Standard Sitting Position Bipod with Pan/Tilt Weight: 1.58 lbs (0.72 Kg) / 1.96 lbs (0.89 Kg) with and Cant Friction Lock Model 150-053 Universal Mounting Adapter Like the Model 3 in every way, but with newly added friction lock controls for the tilt/pan movement and axial rota- tion. Both controls are operated by the off hand, so there is no interference with the actual firing of the rifle. Spring- powered legs need only 1/3 the amount of time that traditional gravity pull legs to deploy to proper height. Adjusts from 15 1/2 inches to 23 3/4 inches in twelve increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100) (150-100) Versa-Pod® Model 54 Patent Pending Elevates centerline of bore from 20 inches fully Extended Length Sitting Position Bipod with retracted to 31 inches fully extended Weight: 2.0 lbs (0.91 Kg) / 2.38 lbs (1.08 Kg) with Pan/Tilt and Cant Friction Lock Model 150-054 Universal Mounting Adapter Another never-before offered length from Versa-Pod®. A bipod for use while sitting in a folding chair or hunting stool. Has the same friction lock controls for the tilt/pan movement and axial rotation as other 50-Series bipods. Spring-powered legs take less than a second to deploy to their maximum length. Adjusts from 20 inches to 31 inches in sixteenhttp://www.acp-waffen.de/frameset.php?site_id=1 increments. Non-marring rubber feet. Includes one Universal Mounting Adapter (150-100). Keng's Firearms Specialty, Inc. © 2010 www.versa-pod.com 5 Classic Versa-Pod® Models Elevates centerline of bore from 9 inches fully retracted to 12 inches (150-100) fully extended Versa-Pod® Model 2 Bipod Standard Prone Bipod / Non-Marring Rubber Feet Model 150-002 Steel/Aluminum Alloy Weight: 1.04 lbs (0.47 Kg) / 1.44 lbs (0.65 Kg) with Universaltarget=_blank Mounting Adapter Model 160-002 All-Steel Construction Weight: 1.48 lbs (0.68 Kg) / 1.90 lbs (0.86 Kg) with Universal Mounting Adapter The foundation of the Versa-Pod® line since its introduction in 1995. Has built-in pan and tilt movements to enable tracking of targets moving simultaneously in two planes. Also has built-in axial rotation for quick corrections on uneven ground. One-touch operation to extend legs, adjusts from 9 inches to 12 inches in six increments. Non-mar- ring rubber feet. Includes one Universal Mounting Adapter (150-100). Elevates centerline of bore from 9 inches fully retracted to 12 (150-100) inches fully extended Versa-Pod® Model 150-001 bipod shown on Colt® AR-15® Model SP1 Rifle with optonal 150-101 adapter Versa-Pod® Model 1 Bipod Standard Prone Bipod / Ridged Metal Feet Model 150-001 Steel/Aluminum Alloy Weight: 1.04 lbs (0.47 Kg) / 1.44 lbs (0.65 Kg) with Universal Mounting Adapter Model 160-001 All-Steel Construction Weight: 1.58 lbs (0.72 Kg) / 2.0 lbs (0.91 Kg) with Universal Mounting Adapter Same as Model 2 in all respects, except ridge metal feet work better in sand or on wet ground.