DOCSLIB.ORG

Oleum Interim AEGL Document

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Oleum Interim AEGL Document Interim 1: 12/2008 1 2 3 ACUTE EXPOSURE GUIDELINE LEVELS (AEGLs) 4 FOR 5 6 SULFURIC ACID 7 SULFUR TRIOXIDE 8 OLEUM 9 10 (CAS Reg. No. 7664-93-9) 11 (CAS Reg. No. 7446-11-9) 12 (CAS Reg. No. 8014-95-7) 13 14 15 16 17 18 19 20 21 INTERIM ACUTE EXPOSURE GUIDELINE LEVELS 22 (AEGLs) 23 24 25 26 27 For 28 NAS/COT Subcommittee for AEGLS 29 30 2009 31 32 33 34 SULFURIC ACID, SULFUR TRIOXIDE, OLEUM Interim 1: 12/2008 1 PREFACE 2 3 Under the authority of the Federal Advisory Committee Act (FACA) P. L. 92-463 of 1972, the 4 National Advisory Committee for Acute Exposure Guideline Levels for Hazardous Substances 5 (NAC/AEGL Committee) has been established to identify, review and interpret relevant toxicological 6 and other scientific data and develop AEGLs for high priority, acutely toxic chemicals. 7 8 AEGLs represent threshold exposure limits for the general public and are applicable to 9 emergency exposure periods ranging from 10 minutes to 8 hours. Three levels Χ AEGL-1, AEGL-2 and 10 AEGL-3 Χ are developed for each of five exposure periods (10 and 30 minutes, 1 hour, 4 hours, and 8 11 hours) and are distinguished by varying degrees of severity of toxic effects. The three AEGLs are 12 defined as follows: 13 14 AEGL-1 is the airborne concentration (expressed as parts per million or milligrams per cubic 15 meter [ppm or mg/m 3]) of a substance above which it is predicted that the general population, including 16 susceptible individuals, could experience notable discomfort, irritation, or certain asymptomatic, 17 non-sensory effects. However, the effects are not disabling and are transient and reversible upon 18 cessation of exposure. 19 20 AEGL-2 is the airborne concentration (expressed as ppm or mg/m ;) of a substance above which it 21 is predicted that the general population, including susceptible individuals, could experience irreversible 22 or other serious, long-lasting adverse health effects, or an impaired ability to escape. 23 24 AEGL-3 is the airborne concentration (expressed as ppm or mg/m ;) of a substance above which it 25 is predicted that the general population, including susceptible individuals, could experience 26 life-threatening health effects or death. 27 28 Airborne concentrations below the AEGL-1 represent exposure levels that could produce mild 29 and progressively increasing but transient and nondisabling odor, taste, and sensory irritation or certain 30 asymptomatic, non-sensory effects. With increasing airborne concentrations above each AEGL, there is 31 a progressive increase in the likelihood of occurrence and the severity of effects described for each 32 corresponding AEGL. Although the AEGL values represent threshold levels for the general public, 33 including susceptible subpopulations, such as infants, children, the elderly, persons with asthma, and 34 those with other illnesses, it is recognized that individuals, subject to unique or idiosyncratic responses, 35 could experience the effects described at concentrations below the corresponding AEGL. 36 ii SULFURIC ACID, SULFUR TRIOXIDE, OLEUM Interim 1: 12/2008 1 TABLE OF CONTENTS 2 3 PREFACE..................................................................................................................................................................... ii 4 LIST OF TABLES.........................................................................................................................................................v 5 EXECUTIVE SUMMARY ..........................................................................................................................................vi 6 1. INTRODUCTION ...................................................................................................................................................1 7 2. HUMAN TOXICITY DATA...................................................................................................................................3 8 2.1. Acute Lethality .................................................................................................................................................3 9 2.1.1. Case Reports ............................................................................................................................................3 10 2.2. Nonlethal Toxicity............................................................................................................................................3 11 2.2.1. Case Reports ............................................................................................................................................3 12 2.2.2. Experimental Studies ...............................................................................................................................4 13 2.2.3. Occupational / Epidemiological Studies ................................................................................................26 14 2.3. Neurotoxicity..................................................................................................................................................27 15 2.4. Developmental / Reproductive toxicity ..........................................................................................................27 16 2.5. Genotoxicity ...................................................................................................................................................28 17 2.6. Carcinogenicity...............................................................................................................................................28 18 2.7. Summary of human data .................................................................................................................................28 19 3. ANIMAL TOXICITY DATA................................................................................................................................29 20 3.1. Acute lethality.................................................................................................................................................29 21 3.1.1. Rats ........................................................................................................................................................29 22 3.1.2. Mice.......................................................................................................................................................30 23 3.1.3. Rabbits...................................................................................................................................................31 24 3.1.4. Other species..........................................................................................................................................31 25 3.2. Nonlethal toxicity ...........................................................................................................................................34 26 3.2.1. Monkeys.................................................................................................................................................34 27 3.2.2. Dogs.......................................................................................................................................................34 28 3.2.3. Rats ........................................................................................................................................................35 29 3.2.4. Mice.......................................................................................................................................................36 30 3.2.5. Rabbits...................................................................................................................................................37 31 3.2.6. Other species..........................................................................................................................................37 32 3.3. Developmental / Reproductive toxicity ..........................................................................................................41 33 3.4. Genotoxicity ...................................................................................................................................................42 34 3.5. Carcinogenicity...............................................................................................................................................42 35 3.6. Summary of animal data .................................................................................................................................44 36 4. SPECIAL CONSIDERATIONS............................................................................................................................45 37 4.1. Metabolism and Disposition...........................................................................................................................45 38 4.2. Mechanism of Toxicity...................................................................................................................................46 39 4.3. Other relevant information..............................................................................................................................46 40 4.3.1. Hygroscopy and species variability in deposition..................................................................................46 41 4.3.2. Species variability in effects ..................................................................................................................47 42 4.3.3. Intraspecies variability / Susceptible populations ..................................................................................48
Load more

Recommended publications
  • SULFUR TRIOXIDE -- Chemical Fact Sheet
    OLEUM/SULFUR TRIOXIDE -- Chemical Fact Sheet 1 What is it? Oleum is a cloudy, gray, fuming, oily, corrosive liquid with a sharp, penetrating odor. When Oleum comes into contact with air following a spill, it releases Sulfur Trioxide. Sulfur Trioxide is a white gas having the appearance of fog. It also has a sharp, penetrating odor that is detectable at low concentrations. Because of the tendency to liberate Sulfur Trioxide on contact with air, Oleum is also known as “fuming Sulfuric Acid”. Where does it Oleum is made by dissolving Sulfur Trioxide into Sulfuric Acid. Sulfur come from? Trioxide is made from Sulfur Dioxide in the presence of a catalyst. What are the It is used in the oil refining process to make crude oil distillates into higher quality materials. common uses for it? Manufacture of soap Manufacture of high purity Sulfuric Acid for the electronic industry Manufacture of catalyst used in production of Sulfuric Acid. How is it Oleum is shipped by truck and pipeline. transported in CCC? How is it stored Oleum is stored in covered tanks. in CCC? Health Hazards from Exposure Exposure Route Symptoms First Aid Inhalation Irritates nose, throat and Remove to fresh air. Seek (low concentrations) lungs medical attention if Burning Sensation symptoms persist. Sneezing, coughing Inhalation Burning sensation Remove to fresh air, get (high concentrations & prolonged exposure) Coughing, gagging medical attention including Chest tightness and pain, oxygen administration. Fluid in lungs Initiate CPR if breathing has Suffocation, death stopped. Eyes Severely irritates eyes Rinse eyes with water for at Burning/discomfort least 5 minutes.
    [Show full text]
  • Sulfur (IV) Isotopic Exchange Reaction in Aqueous and Concentrated Acid
    THE KINETICS OF THE SULFtJR(IV) - suLFuR(vI) ISOTOPIC EXCHANGE REACTION IN AQUEOUS AND CONCTRATED ACID )LUTIONS by RAY LOCKE McDONALD A THESIS submitted to OHEGON STATE COLLEGE In parti1 fulfillment of the requirements for the degree of DOCTOR 0F PHW)SOPHY June 196]. flIiY1i$IT Redacted for Privacy Professor of Chemistry In Charge of Major Red acted f or P rivacy Chairman of Department of Cnemistry Redacted for Privacy Chairman of School Graduate Committee Redacted for Privacy Dean of Graduate School nate thesis is presented Typed by LeAnna kiarris tffi*ffimffi Fcar rdsrmo ad mflss. dte rU egestr d lilt rretc Mlr1 tb lutEm'rprm [ilr;r* dffi tldr te EufUe ?. E. I*1ill. TABLE OF CONTENTS Page I. INTRODUCTION ...................... i II. E(PERIMENTAL ...................... 7 A. General Procedure ................. 7 B. Radioactivity Analysis ............... 9 C. Chemical Analysis ................ il D, Preparation of Materials and Reactant Solutions 13 1. General ................. 13 2. Sulfur Dioxide ................ 1.3 3. Labeled Aqueous Sulfuric Acid ......... i1 )4. Labeled Concentrated Sulfuric cid ....... 15 ;. Labeled 100% Sulfuric Acid ........... 16 6. Labeled Fuming Sulfuric Acid .......... 16 7. Labeled Aqueous Sodium Bisulfate ........ 16 8. Lat.ed Sodium Bisulfate in Aqueous Sulfuric Acid .................. 17 9. Labeled Sodium Bisulfate in Concentrated . Sulfuric Acid .................. 17 10. Labeled Sodium Sulfate ............. 17 li. Labeled Sodium Sulfate in Aqueous Sodium Bisulfate ................ 18 12. Labeled Elemental Sulfur ............ 18 III. RUN PROCEDURE AND DATA ................ 19 A. Sulfur(IV) - Sulfur(VI) Exchange in Basic Media . 19 B, - Sulfur(IV) Sulfur(VI) Exchange in Acidic Media . .23 1. Radiosulfur Ecchsuge Experiments Between Sulfur Dioxìe and Aqueous Sulfuric Acid of High Specific Activity ...........
    [Show full text]
  • United States Patent Office Patented Jan
    3,297,748 United States Patent Office Patented Jan. 10, 1967 1. 2 was found to have superior odor qualities, based upon 3,297,748 ALKYLBENZENE SULFONATE COLOR AND odor ratings made by subjective panel testing. ODOR INHIBITION By sulfonation is meant the treatment of alkylbenzenes John B. Wilkes, Albany, Calif., assignor to Chevron Re with concentrated sulfuric acid, and particularly with search Company, a corporation of Delaware concentrated sulfuric acid-sulfur trioxide mixtures, there No Drawing. Filed June 13, 1963, Ser. No. 287,489 by to produce the corresponding alkylbenzene sulfonic 2 Claims. (CI. 260-505) acids. Preferably, the present process contemplates the use of oleum having from about 5 to 28 percent sulfur This invention relates to an improved method for the trioxide content, by weight. In general, sulfonation reac preparation of branched-chain alkylbenzene sulfonate de 0 tion temperatures useful in the process range from about tergents. More specifically, this invention relates to the 50 to 150 F.; and, as is known in the art, from about a preparation of branched side-chain alkylbenzene sulfo stoichiometric amount to about a 20 percent excess of nate detergent by the sulfonation of branched-chain alkyl the sulfonating agent, based upon the alkylbenzene, is benzenes with oleum in the presence of color and odor preferably used. Usually, the sulfur trioxide in the oleum inhibiting amounts of acetic acid and a lower alkylben mixture is the sulfonation agent consumed, although the ZCle. sulfuric acid may also be consumed to the point where The active ingredient in most detergents in household the residual sulfuric acid medium has been reduced use are alkylated aryl sulfonates.
    [Show full text]
  • Determination of Sulfuric Acid and Oleum Concentration Relevant For: Chemical Industry / Sulfuric Acid Production
    Determination of Sulfuric Acid and Oleum Concentration Relevant for: Chemical industry / Sulfuric acid production Sulfuric acid is widely used in the chemical industry, plastics industry and petrochemistry, for the production of phosphoric acid as a starting material for fertilizers, in the metal industry (e.g. in etching baths), and in accumulators. Dissolving sulfur trioxide, SO3, in concentrated sulfuric acid results in a fuming solution called oleum (or "fuming sulfuric acid"). Oleum is used in the chemical industry, for example for the production of intermediate materials or chemical fibers. 2.2. Conventional: Titration - a tedious method The conventional method for determination of sulfuric acid concentration is titration. However, titration is not only time-consuming and hazardous, but also includes a range of error prone operation steps even for skilled 1. Quality control in sulfuric acid production laboratory staff. The titration of sulfuric acid or oleum is carried out Sulfuric acid (H2SO4) is a high production volume with a base, commonly sodium hydroxide, NaOH. The chemical and plays an important role in various acid sample has to be diluted prior to titration - a time- industries. Sulfuric acid is a colorless and odorless consuming and hazardous operation. The accuracy of oily liquid which is highly hygroscopic. Depending on the results is influenced by several factors such as the its concentration the acid is used for different skill of the operator, the quality of the standard base purposes. solution, the precision of the burettes, the quality of The production of sulfuric acid proceeds in several the indicator used, etc. In routine analysis accuracies of 0.1 % w/w to 0.5 % w/w H SO can be attained.
    [Show full text]
  • TNT Rri Rrrniteotoluenes AND
    TNT rri rRrNITEOTOLUENES AND MONO- AND DINITBOTOLUENES THEIR MANUFACTURE AND PROPERTIES BY G. CARLTON SMITH, B.S. Instructor in General Chemistry, School of Applied Science, Carnegie Institute of Technology, Pittsburgh, Pa, LONDON CONSTABLE AND COMPANY, LIMITED 10 ORANGE ST., LEICESTER SQ., W. C. 1918 Copyright, 1918, by VAN NOSTRAND COMPANY WHOSE SACRIFICES AND LOVE HAVE MADE POSSIBLE MY EDUCATION THIS BOOK IS AFFECTIONATELY DEDICATED ACKNOWLEDGMENT THE writer wishes to thank all those who have so kindly aided him in the preparation of this book. He is especially grateful for the valued comments and criticisms offered by the members of the Staff of the Department of Chemical Engineering, Carnegie Institute of Technology; for the facts which form the basis of Chapter X, by Dr. Samuel Haythorn of the Singer Memorial Laboratory, Allegheny General Hos- pital; and for data on TNT manufacture by Mr. Robert M. Crawford of the Grasselli Powder Co. The Chemical and Industrial Journals have been consulted freely, and much valuable material has been extracted therefrom. Department of Chemical Engineering, Carnegie Institute of Technology, PITTSBURGH, PA., May, 1918. TABLE OF CONTENTS CHAPTER I PAGE INTKODUCTION 1 CHAPTER II HISTORICAL 6 CHAPTER III THE THEORY OF THE NITRATION OF TOLUENE 20 CHAPTER IV THE MANUFACTURE OF TNT 29 CHAPTER V THE PURIFICATION OF TNT 52 CHAPTER VI INSPECTION AND TESTING OF TNT 61 CHAPTER VII PROPERTIES OF THE TRINITROTOLUENES 77 CHAPTER VIII PROPERTIES OF THE MONO- AND DINITROTOLUENES 95 CHAPTER IX ACCIDENTS IN TNT PLANTS 106 CHAPTER X TNT DISEASES 112 TRINITROTOLUENE CHAPTER I INTRODUCTION THE almost universal adoption of trinitrotoluene as the most efficient explosive in modern warfare; the development and refinement of its manufacture, and the interesting chemistry of its compounds, as well as those of the lower nitro-derivatives of toluene has prompted quite extensive research as to their composition, structure, manufacture, properties and uses.
    [Show full text]
  • Safety in University Chemistry Courses; an Introduction for Students
    Information Safety in University Chemistry Courses An Introduction for Students BGI/GUV-I 8553 E October 2009 Published by: Deutsche Gesetzliche Unfallversicherung (DGUV) Mittelstraße 51, 10117 Berlin Tel.: +49 30 288763800 Fax: +49 30 288763808 E-Mail: [email protected] Internet: www.dguv.de In cooperation with the Gesellschaft Deutscher Chemiker (GDCh) and the Berufsgenossenschaft Rohstoffe und chemische Industrie (BG RCI), formerly BG Chemie. This brochure is permanently being updated by the DGUV working team “Gefahrstoffe”. Translated by the Chevalier Dr. Dr. Rüdiger Marcus Flaig © October 2009 The October 2009 edition corresponds to the German version of the brochure “Sicheres Arbeiten in chemischen Laboratorien” (BGI/GUV-I 8553), October 2009. All rights reserved. No part may be reprinted or copied without the publisher’s prior consent. BGI/GUV-I 8553 E can be obtained from your competent accident insurance provider. The addresses are to be found at www.dguv.de Information Safety in University Chemistry Courses An Introduction for Students BGI/GUV-I 8553 E October 2009 Table of Contents 1 Introduction to lab safety 64 Chemical equipment 26 4.1 Handling laboratory glassware 26 2 Before beginning 4.2 Setting up chemical equipment 27 the practical course 94.3 Heating of equipment 28 2.1 Where are important 4.4 Cooling 30 installations and accessories? 9 4.5 Special information 31 2.2 How to learn about dangerous 4.6. Special methods 31 properties of substances and 4.6.1 Work under reduced pressure 31 safety-relevant parameters 10 4.6.2 Working
    [Show full text]
  • Oleum Acid Measurement
    Foxboro Application Solution Oleum Acid Measurement Introduction Oleum (fuming sulfuric acid, H2S2O7) is corrosive and commonly made in various strengths, consisting of SO3 dissolved in 100% H2SO4. Therefore, 20% oleum contains 20% SO3 and 80% H2SO4 by weight. Contingent on strength, vapor pressure is such that escaping SO3 fumes combine with moisture in the air to form sulfuric acid mist particles. These sulfuric acid mist particles are typically visible and can create dense white clouds of fumes. • Normally turbid, off-white liquid • Solution of uncombined SO3 dissolved in H2SO4 • Oleum sometimes referred to as greater than 100% H2SO4 www.fielddevices.foxboro.com Foxboro Application Solution > Oleum Acid Measurement Uses • In sulfonation and nitration processes • Insecticides • Leading source of sulfonation for powdered/ • Oil refining synthetic laundry products • Explosives • High-strength adhesives Production Typically, oleum is produced as part of the commercial process of manufacturing sulfuric acid. Today essentially all sulfuric acid and oleum produced in the United States is manufactured using the contact method. The contact method incorporates three basic operations, each of which corresponds to a distinct chemical reaction. The basic raw materials for sulfuric acid are sulfur, air, and water. First — the sulfur feedstock (molten sulfur or sulfur containing ore) is oxidized (burned in air) to sulfur dioxide (SO2). Next — the sulfur dioxide is fed to a process unit called a converter, where it is catalytically (such as vanadium pentoxide catalyst or platinum) oxidized (at 450° Celsius) to sulfur trioxide (SO3). Finally — the sulfur trioxide is absorbed in a strong 98% sulfuric acid solution (fuming sulfuric acid or oleum).
    [Show full text]
  • Sulfuric Acid
    Mineral Acids Course : ACCE-2221 2nd Year : Even Semester Group-A : Chapter-1 7 December 2015 Course Outline 1. Sources of sulphur 2. Mining of sulphur- Sicilian and Frasch processes 3. Manufacture of sulphuric acid- chamber and contact process 4. Oleum and uses 5. Production of hydrochloric acid and nitric acid- Properties & uses 7 December 2015 Mineral Acid A Mineral Acid is an acid derived from one or more inorganic compounds. One part of these acid comes from inorganic minerals, that is why these acids are known as mineral acid. Some mineral acids are- • HCl • HNO3 • H2SO4 • H3PO4 • H3BO3 • HClO4 • H4TiO4 7 December 2015 Sources of Sulfur • Volcanic deposits in Sicily (Italy) • Iron pyrite • Ammonium sulfate • Calcium sulfate • Fossil fuel • Zinc blend • Gypsum • Epsom salt 7 December 2015 Sources of Sulfur Sulfur Mining of Sulfur Mining of Sulfur 7 December 2015 Sources of Sulfur Sulfur can be collected by two major process: 1. Sicilian Process 2. Frasch Process 7 December 2015 Frasch process In the Frasch process, three concentric tubes are introduced into the sulfur deposit. Superheated water (165 °C, 2.5-3 MPa) is injected into the deposit via the outermost tube. Sulfur (m.p. 115 °C) melts and flows into the middle tube. Water pressure alone is unable to force the sulfur into the surface due to the molten sulfur's greater density, so hot air is introduced via the innermost tube to froth the sulfur, making it less dense, and pushing it to the surface. The sulfur obtained can be very pure (99.7 - 99.8%). In this form, it is light yellow in color.
    [Show full text]
  • Sulfuric Acid Influence on the Nitrocompounds Detonation Reactions V
    Sulfuric Acid Influence on the Nitrocompounds Detonation Reactions V. Gamezo, S. Khoroshev, B. Kondrikov, G. Kozak To cite this version: V. Gamezo, S. Khoroshev, B. Kondrikov, G. Kozak. Sulfuric Acid Influence on the Nitrocompounds Detonation Reactions. Journal de Physique IV Proceedings, EDP Sciences, 1995, 05 (C4), pp.C4-395- C4-405. 10.1051/jp4:1995432. jpa-00253737 HAL Id: jpa-00253737 https://hal.archives-ouvertes.fr/jpa-00253737 Submitted on 1 Jan 1995 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. JOURNAL DE PHYSIQUE IV Colloque C4, supplement au Journal de Physique 111, Volume 5, mai 1995 Sulfuric Acid Influence on the Nitrocompounds Detonation Reactions V.N. Gamezo, S.M. Khoroshev, B.N. Kondrikov and G.D. Kozak Mendeleev University of Chemical Technology, 9 Miusskaja Sq., 125047 Moscow, Russia Abstract: The detonation failure diameter df and detonation velocity D of mixtures of nitromethane, trinitrotoluene, dinitrotoluene, and trinitrobenzene with sulfiric acid and oleum have been measured in the wide range of concentrations It was shown that the detonation ability of the nitrocompounds depends significantly on the sulfuric acid content The minimum value of df for the mixture TNTIoleum is about 2 mm, i.e., 30 times less, than that for pure melted TNT, and practically equal to df of nitroglycerine.
    [Show full text]
  • Oleum, Sulfur Trioxide, and Sulfuric Acid
    Oleum, Sulfur Trioxide, and Sulfuric Acid These three very corrosive chemicals are closely related. Oleum is cloudy, oily, fuming liquid or sometimes a solid which releases sulfur trioxide in contact with air as in a spill. This sulfur trioxide reacts quickly with any air moisture producing a fine sulfuric acid mist. Inhalation at low concentrations for a short period irritates the nose, throat, and lungs. Prolonged exposure or higher concentrations causes a burning sensation, coughing, gagging, chest pain, fluid in lungs, and possible suffocation and death. The effects of inhalation may be delayed. The mist also severely irritates eyes and skin. We will look at these chemicals, its uses, and examine several accidents involving oleum spills. Oleum spills are very dangerous because chemical contact can “suck” the water out of organic materials leaving a black char generating a lot of heat and possibly resulting in fire. If water is sprayed on the chemical, a sulfuric acid mist will likely be formed which is difficult to control and dangerous to inhale. Physical Properties of Oleum, Sulfur Trioxide, and Sulfuric Acid Oleum is excess sulfur trioxide dissolved in sulfuric acid. Another name for Oleum is “Sulfuric acid, fuming”. It is sometimes shipped by railcar under UN 1831. The chemical may also be transported tanker truck, pipeline or in smaller containers. The Emergency Response Guidebook under UN 1831 makes a distinction between “Sulfuric acid, fuming, with less than 30% free Sulfur trioxide” and “Sulfuric acid, with not less than 30% free Sulfur trioxide”. For example, a tank car containing 90 tons of oleum with 30% free sulfur trioxide contains 60 tons of sulfuric acid and 30 tons of free sulfur trioxide dissolved in the sulfuric acid.
    [Show full text]
  • 16.4 Electrophilic Aromatic Substitution Reactions of Benzene 751
    16_BRCLoudon_pgs4-3.qxd 11/26/08 9:06 AM Page 750 750 CHAPTER 16 • THE CHEMISTRY OF BENZENE AND ITS DERIVATIVES This hybridization allows one of its electron pairs to occupy a 2p orbital, which has the same size, shape, and orientation as the carbon 2p orbitals of the ring. In other words, an oxygen 2p orbital overlaps more effectively with the carbon 2p orbitals of the ring than an oxygen sp3 or- bital would. (We learned about the same effect in resonance-stabilized allylic systems; p. 713). The UV spectrum of anisole is a direct consequence of this overlap. PROBLEMS 16.10 (a) Explain why compound A has a UV spectrum with considerably greater lmax values and intensities than are observed for ethylbenzene. C2H5 C2H5 lmax 256 nm (e 20,000) LLL = 283 nm (e = 5,100) = A (b) In view of your answer to part (a), explain why the UV spectra of compounds B and C are virtually identical. CH3 H3C CH3 $ $ " $ H3C $ CH3 Lv vL i H C 3 M%CH3 H C CH 3 3 C B mesitylene bimesityl lmax 266 nm (e 200) = = lmax 266 nm (e 700) = = 16.11 How could you distinguish styrene (Ph CHACH2) from ethylbenzene by UV spec- troscopy? L ELECTROPHILIC AROMATIC SUBSTITUTION 16.4 REACTIONS OF BENZENE The most characteristic reaction of benzene and many of its derivatives is electrophilic aro- matic substitution. In an electrophilic aromatic substitution reaction, a hydrogen of an aro- matic ring is substituted by an electrophile—that is, by a Lewis acid. The general pattern of an electrophilic aromatic substitution reaction is as follows, where E is the electrophile: H EY E H Y (16.1) LL+ L + L (Note that in this reaction and in others that follow, only one of the six benzene hydrogens is shown explicitly to emphasize that one hydrogen is lost in the reaction.) All electrophilic aromatic substitution reactions occur by similar mechanisms.
    [Show full text]
  • 1767 Date: September 1999 Revision: August 2008 DOT Number: UN 1829
    Right to Know Hazardous Substance Fact Sheet Common Name: SULFUR TRIOXIDE Synonyms: Sulfuric Anhydride; Sulfuric Oxide CAS Number: 7446-11-9 Chemical Name: Sulfur Trioxide RTK Substance Number: 1767 Date: September 1999 Revision: August 2008 DOT Number: UN 1829 Description and Use EMERGENCY RESPONDERS >>>> SEE BACK PAGE Sulfur Trioxide is a colorless to white, crystalline (sand-like) Hazard Summary solid which can also exist as a gas or liquid. It is used primarily Hazard Rating NJDOH NFPA as a Sulfating agent in making detergents, as a disinfectant HEALTH 3 - and preservative, and in textile and battery manufacturing. FLAMMABILITY 0 - REACTIVITY 2W - f ODOR THRESHOLD = 1 ppm CARCINOGEN f Odor thresholds vary greatly. Do not rely on odor alone to determine potentially hazardous exposures. CORROSIVE AND REACTIVE POISONOUS GASES ARE PRODUCED IN FIRE CONTAINERS MAY EXPLODE IN FIRE DO NOT USE WATER Reasons for Citation Hazard Rating Key: 0=minimal; 1=slight; 2=moderate; 3=serious; 4=severe f Sulfur Trioxide is on the Right to Know Hazardous Substance List because it is cited by DOT, NTP, DEP, IARC and EPA. f Sulfur Trioxide can affect you when inhaled. f Sulfur Trioxide is a CARCINOGEN. HANDLE WITH f This chemical is on the Special Health Hazard Substance List. EXTREME CAUTION. f Sulfur Trioxide is CORROSIVE and contact can severely irritate and burn the skin and eyes with possible eye damage. f Inhaling Sulfur Trioxide can irritate the nose and throat. SEE GLOSSARY ON PAGE 5. f Inhaling Sulfur Trioxide can irritate the lungs. Higher exposures may cause a build-up of fluid in the lungs FIRST AID (pulmonary edema), a medical emergency.
    [Show full text]