DOCSLIB.ORG

ILC Dover Apollo Reports and Aperture Card Drawings Collection

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ILC Dover Apollo Reports and Aperture Card Drawings Collection ILC Dover Apollo Reports and Aperture Card Drawings Collection Sarah LeClaire 2017 National Air and Space Museum Archives 14390 Air & Space Museum Parkway Chantilly, VA 20151 [email protected] https://airandspace.si.edu/archives Table of Contents Collection Overview ........................................................................................................ 1 Administrative Information .............................................................................................. 1 Scope and Contents note................................................................................................ 2 Biographical/Historical note.............................................................................................. 1 Arrangement note............................................................................................................ 2 Container Listing ............................................................................................................. 3 Series 1: ILC Dover Aperture Cards........................................................................ 3 Series 2: ILC Dover Apollo Reports....................................................................... 45 ILC Dover Apollo Reports and Aperture Card Drawings Collection NASM.2016.0032 Collection Overview Repository: National Air and Space Museum Archives Title: ILC Dover Apollo Reports and Aperture Card Drawings Collection Identifier: NASM.2016.0032 Date: 1965-1972 Extent: 24.4 Cubic feet (58 boxes) Language: English . Summary: This collection consists of fourteen cubic feet of aperture card drawings and six cubic feet of ILC Dover Apollo-era reports relating to space suits. Administrative Information Acquisition Information ILC Dover LP, gift, 2016 Processing Information This collection was arranged, described, and the finding aid encoded by Sarah LeClair, 2017. Preferred Citation ILC Dover Apollo Reports and Aperture Card Drawings Collection, Acc. 2016-0032, National Air and Space Museum, Smithsonian Institution. Restrictions No restrictions on access. Conditions Governing Use Material is subject to Smithsonian Terms of Use. Should you wish to use NASM material in any medium, please submit an Application for Permission to Reproduce NASM Material, available at Permissions Requests. Biographical Note ILC Dover is an American engineering development and manufacturing company that has been involved in space development and production programs since the 1960s. Best known for being awarded the prime contract for the Apollo Space Suits, ILC designed and manufactured the suit worn by astronauts in the Apollo program, including the twelve that walked on the moon. ILC has also designed and manufactured Page 1 of 55 ILC Dover Apollo Reports and Aperture Card Drawings Collection NASM.2016.0032 all space suits for NASA since the Apollo project, including the Space Suit Assembly portion of the Extravehicular Mobility Unit, worn by astronauts during performance of extra-vehicular activity on Space Shuttle missions and on the International Space Station. Scope and Contents This collection contains a combination of drawings, manuals, and reports relating to the space suits produced by ILC Dover, 1965-1972. Arrangement The collection is organized first by the one or two letter prefix and then by the drawing number. Two letter prefixes are used on all written documents and reports. Single letter prefixes are used exclusively on drawings and illustrations. The collection didn't include a key to decode what the lettered prefixes meant. Page 2 of 55 Series 1: ILC Dover Aperture Cards ILC Dover Apollo Reports and Aperture Card Drawings Collection NASM.2016.0032 Container Listing Series 1: ILC Dover Aperture Cards 1.1: Specifications Box 1, Item SP Procurement Specification for Fecal Containment Subsystem, 2/24/1967, 101-07 2/14/1972 Punched Cards Box 1, Item SP Procurement Specification for Helmet Shell, 7/24/1967 101-08 Punched Cards Box 1, Item SP Procurement Specification for A-6L Liquid Cooling Garment, 6/14/1966, 101-09 3/15/1972 Punched Cards Box 1, Item SP Procurement Specification for Procurement Specification for Procurement 101-10 Specification for Pressure Gage, 3/29/1967, 2/27/1969 Punched Cards Box 1, Item SP Procurement Specification for A-5L Liquid Cooling Garment, 2/8/1966 101-11 Punched Cards Box 1, Item SP Procurement Specification for Extravehicular Visor Assembly, 12/7/1966 101-12 Punched Cards Box 1, Item SP Procurement Specification for Communications Cap Ear Enclosures, 101-13 6/28/1966 Punched Cards Box 1, Item SP Procurement Specification for Communications Cap Electrical Harness, 101-15 6/27/1966 Punched Cards Box 1, Item SP Procurement Specification for Pressure Garment Assembly, Electrical Harness 101-17 Sub-Assembly, 10/5/1967 Punched Cards Box 1, Item SP Procurement Specification for Electrical Harnesses, 9/6/1968 101-18 Punched Cards Box 1, Item SP 101-21, Procurement Specification for Skylab Extravehicular Visor Assembly, CN SP101-21 10/1/1971 Punched Cards Page 3 of 55 Series 1: ILC Dover Aperture Cards ILC Dover Apollo Reports and Aperture Card Drawings Collection NASM.2016.0032 Box 1, Item SP Acceptance Test Specification Convolute and Glove Bladder, 6/7/1966 102-01 Punched Cards Box 1, Item SP Acceptance Test Specification A-5L Liquid Cooling Garment, 3/24/1966 102-06 Punched Cards Box 1, Item SP 102-10, Acceptance Test Specification Neck Disconnect Ring Assembly, 8/22/1967 CN SP102-10 Punched Cards Box 1, Item SP Acceptance Test Specification Arm Bearing Assembly, 7/5/1967 102-11 Punched Cards Box 1, Item SP Acceptance Test Specification, Feed Port, 7/11/1967 102-12 Punched Cards Box 1, Item SP 102-13, Acceptance Test Specification, Gas Connector Assemblies, 12/18/1967 CN SP102-13 Punched Cards Box 1, Item SP 102-14, Acceptance Test Specification, Wrist Disconnect, 6/6/1966 CN SP102-14 Punched Cards Box 1, Item SP Acceptance Test Specification, Fecal Containment Subsystem, 2/24/1967, 102-15 11/9/1968 Punched Cards Box 1, Item SP 102-16, Acceptance Test Specification, Pressure Gage, 6/6/1966, 2/27/1969 CN SP102-16 Punched Cards Box 1, Item SP Acceptance Test Specification, Pressure Garment Assembly, Electrical 102-17 Harness, 6/9/1966, 9/6/1968 Punched Cards Box 1, Item SP Acceptance Test Specification, Communications Cap Electrical Harness, 102-24 6/17/1966 Punched Cards Box 1, Item SP Acceptance Test Specification, Communications Cap Ear Enclosures, 102-25 6/17/1966 Punched Cards Box 1, Item SP Acceptance Test Specification, Dyed Textile Materials, 6/22/1966 102-26 Punched Cards Box 1, Item SP Acceptance Test Specification, Wrist Disconnect Test Fixtures, 10/5/1966 102-27 Punched Cards Page 4 of 55 Series 1: ILC Dover Aperture Cards ILC Dover Apollo Reports and Aperture Card Drawings Collection NASM.2016.0032 Box 1, Item SP Acceptance Test Specification, Neck Disconnect Ring Test Fixtures, 10/5/1966 102-28 Punched Cards Box 1, Item SP Acceptance Test Specification, Pressure Sealing Closure, 10/26/1967, 102-29 12/27/1967 Punched Cards Box 1, Item SP Acceptance Test Specification, Suit Mounted Pressure Relief Valve, 11/2/1967, 102-30 6/25/1970 Punched Cards Box 1, Item SP 102-31, Acceptance Test Specification, Unsupported Rubber Dipped Goods, CN SP102-31 12/31/1969 Punched Cards Box 1, Item SP 102-32, Acceptance Test Specification, Multiple Water Connector, 10/06/1967 CN SP102-32 Punched Cards Box 1, Item SP 102-33, Acceptance Test Specification, Pressure Garment Assembly, Bio-Harness, CN SP1.2-33 10/11/1967 Punched Cards Box 1, Item SP Acceptance Test Specification, Helmet Shell for the Apollo EMU Garment 102-34 Program, 7/25/1968 Punched Cards Box 1, Item SP Acceptance Test Specification, Metallic Vaporization Deposited Aluminized 102-35 Films, 12/17/1968 Punched Cards Box 1, Item SP 102-38, Acceptance Test Specification, Gas Connector Assemblies, 1/27/1970 CN SP102-38 Punched Cards Box 1, Item SP 102-39, Acceptance Test Specification, Helmet Neck Ring Disconnect Assembly, CN SP102-38 1/27/1970 Punched Cards Box 1, Item SP 102-40, Acceptance Test Specification, Wrist Disconnect, 1/27/1970 CN SP102-40 Punched Cards Box 1, Item SP 102-41, Acceptance Test Specification, Multiple Water Connector, 1/27/1970 CN SP102-41 Punched Cards Box 1, Item SP 102-43, Acceptance Test Specification, Manufacture of at A7LB Bladder Assembly, CN SP102-43 12/29/1969 Punched Cards Page 5 of 55 Series 1: ILC Dover Aperture Cards ILC Dover Apollo Reports and Aperture Card Drawings Collection NASM.2016.0032 Box 1, Item SP Acceptance Test Specification, LCG Connector Adapter Assembly, 1/27/1970 102-44 Punched Cards Box 1, Item SP Acceptance Test Specification, Pressure Sealing Slide Fastener, 2/26/1971 102-45 Punched Cards Box 1, Item SP Acceptance Test Specification, A7LB Suit Mounted Pressure Relief Valve, 102-46 5/14/1970 Punched Cards Box 1, Item SP Acceptance Test Specification, Diverter Valve Assembly - A7LB, 9/24/1970 102-47 Punched Cards Box 1, Item SP 102-48, Acceptance Test Specification, A7LB Suit Mounted Pressure Relief Valve, CN SP102-48 2/23/1971 Punched Cards Box 1, Item SP Acceptance Test Specification, A7L and A7LB Arm Bearing Assemblies, 102-49 2/25/1971 Punched Cards Box 1, Item SP Pre-Delivery Acceptance Test Specification, A-6L Pressure Garment 102-04 Assembly, 6/17/1966 Punched Cards Box 1, Item SP Pre-Delivery Acceptance Test Specification, A-6L Liquid Cooling Garment, 102-07 6/17/1966 Punched Cards Box 1, Item SP Pre-Delivery Acceptance Test Specification, A-6L Thermal Meteroid Garment, 102-08 6/17/1966 Punched
Load more

Recommended publications
  • Dry Lubricant Coating Plays a Hand in Man Reaching for Mars
    CASE STUDY Dry Lubricant Coating Plays A Hand In Man Reaching For Mars By Corey Wesnitzer, General Magnaplate Corp. Following the recent successful landings as the severe dust storms experienced on of the ‘Opportunity’ and ‘Spirit’ Rovers on MARS. In response to the growing likelihood Mars, NASA has become more open about its of manned planetary expeditions, ILC Dover investigations into a potential manned lunar of Dover, Delaware, has developed a new mission and a manned planetary expedition generation of spacesuit called the ‘I-Suit’. on Mars itself. In fact, NASA recently set up a new exploration office at its headquarters. Since project Apollo, ILC has been the designer and producer of the space suits Scientists and researchers involved in the for NASA (sub-contracted by Hamilton study, realizing that a hostile environment will Sundstrand), and the Company has leveraged confront long-distance space travelers, have its expertise in material fabrication to noted the requirement of highly specialized manufacture most of the blimps we see technologies and systems, e.g., durable type floating above sporting events, and even the suits for protection against events such inflatable ‘balloons’ that were responsible for the safe landing of both Mars Rovers. A total of 400 humans have been sent to explore space in ILC Dover suits since the mid-1960s and the next manned mission (slated for April 2005) is Expedition-9, a trip to the International Space Station. Space suits are largely modular in design and manufacturing them is a two-part process. ILC Dover is responsible for developing and manufacturing the arms, gloves, legs, torso, waist etc and the liquid cooling ventilation garment (LCVG) that removes most of the body heat from the suit.
    [Show full text]
  • Session: CES401: ASME/AIAA LS&S Extravehicular Activity: Systems
    https://ntrs.nasa.gov/search.jsp?R=20150021775 2019-08-31T05:23:29+00:00Z View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by NASA Technical Reports Server AN INTEGRATED EXTRAVEHICULAR ACTIVITY RESEARCH PLAN Andrew F. J. Abercromby, Amy J. Ross, J. Scott Cupples Multiple organizations within NASA and outside of NASA fund and participate in research related to extravehicular activity (EVA). In October 2015, representatives of the EVA Office, the Crew and Thermal Systems Division (CTSD), and the Human Research Program (HRP) at NASA Johnson Space Center agreed on a formal framework to improve multi-year coordination and collaboration in EVA research. At the core of the framework is an Integrated EVA Research Plan and a process by which it will be annually reviewed and updated. The over-arching objective of the collaborative framework is to conduct multi-disciplinary cost-effective research that will enable humans to perform EVAs safely, effectively, comfortably, and efficiently, as needed to enable and enhance human space exploration missions. Research activities must be defined, prioritized, planned and executed to comprehensively address the right questions, avoid duplication, leverage other complementary activities where possible, and ultimately provide actionable evidence- based results in time to inform subsequent tests, developments and/or research activities. Representation of all appropriate stakeholders in the definition, prioritization, planning and execution of research activities is essential to accomplishing the over-arching objective. A formal review of the Integrated EVA Research Plan will be conducted annually. External peer review of all HRP EVA research activities including compilation and review of published literature in the EVA Evidence Book is already performed annually.
    [Show full text]
  • Apollo Space Suit
    APOLLO SPACE S UIT 1962–1974 Frederica, Delaware A HISTORIC MECHANICAL ENGINEERING LANDMARK SEPTEMBER 20, 2013 DelMarVa Subsection Histor y of the Apollo Space Suit This model would be used on Apollo 7 through Apollo 14 including the first lunar mission of Neil Armstrong and Buzz International Latex Corporation (ILC) was founded in Aldrin on Apollo 11. Further design improvements were made to Dover, Delaware in 1937 by Abram Nathanial Spanel. Mr. Spanel improve mobility for astronauts on Apollo 15 through 17 who was an inventor who became proficient at dipping latex material needed to sit in the lunar rovers and perform more advanced to form bathing caps and other commercial products. He became mobility exercises on the lunar surface. This suit was known as famous for ladies apparel made under the brand name of Playtex the model A7LB. A slightly modified ILC Apollo suit would also go that today is known worldwide. Throughout WWII, Spanel drove on to support the Skylab program and finally the American-Soyuz the development and manufacture of military rubberized products Test Program (ASTP) which concluded in 1975. During the entire to help our troops. In 1947, Spanel used the small group known time the Apollo suit was produced, manufacturing was performed as the Metals Division to develop military products including at both the ILC plant on Pear Street in Dover, Delaware, as well as several popular pressure helmets for the U.S. Air Force. the ILC facility in Frederica, Delaware. In 1975, the Dover facility Based upon the success of the pressure helmets, the Metals was closed and all operations were moved to the Frederica plant.
    [Show full text]
  • ILC Dover Delivers Safety in the Home and out in Space
    ILC Dover delivers safety Beyond in the home and out in space Boundaries 36 September/October 2018 | DELAWARE BUSINESS Guide to Manufacturing ILC DOVER HAS BEEN PROVIDING SOLUTIONS INFLATABLE HABITATS to customers for their most complex problems for over 70 years. ILC Dover continues to develop and manufacture a variety of inflat- Headquartered in Frederica, Delaware, and employing over 600 people, the able habitats, air-locks and shelters for use in earth orbit and lunar/ company continues to innovate and develop new ideas and technologies. planetary exploration. ILC’s engineers built upon work conducted by ILC Dover is best known for the spacesuit technology that enabled man NASA in the 1960s, and our own work in space suits and high strength to walk on the moon as part of the Apollo missions in the late 1960s and inflatable structures, to create deployable habitats for space exploration. 1970s. Since those early Apollo missions, and still today, ILC Dover has ILC has proven systems and processes that ensure the level of quality, provided every space suit used by NASA astronauts working on the Space reliability and safety to meet all spaceflight requirements. We perform Shuttle and International Space Station. There is so much more that ILC the design and systems engineering, manufacture and test on site or at Dover is doing to create innovation and solutions for customers in a wide remote locations. array of industries. ILC Dover today participates in five distinct markets, each of these markets requiring very different and unique solutions and LIGHTER THAN AIR engineering, which ILC Dover is uniquely able to provide.
    [Show full text]
  • ILC Space Suits & Related Products
    ILC Space Suits & Related Products 0000-712731 Rev. A REVISIONS LETTER DESCRIPTION DATE - Initial Release 10/26/07 A Update with review comments and inclusion of the Antarctic Habitat and 11/28/07 Shuttle Adjustable Protective Mitten Assembly (APMA). This report was written through the volunteer efforts of ILC employees, retirees and friends. Additionally, this report would not have been possible without the efforts of Ken Thomas at Hamilton Sundstrand who truly realizes the significance of preserving the history of US space suit development. The information has been compiled to the best of the participant’s abilities given the volunteer nature of this effort. Any errors are unintentional and will be corrected once identified and verified. If there are any questions regarding any detail of this report, please call (302) 335-3911 Ext. 248. The production of this report does not imply ILC Dover agrees with or is responsible for the contents therein. This report has been compiled from information in the public domain and poses no export licensing issues. William Ayrey Primary Author & Publisher 2 ILC Space Suits & Related Products 0000-712731 Rev. A Table Of Content Chapter 1 The Path Leading To Space -------------------------------------------------------------------------------- 6 The XMC-2-ILC X-15 Competition Prototype (1957) --------------------------------------------------------- 6 The SPD-117 Mercury Competition Prototype (1959) --------------------------------------------------------- 8 Chapter 2 The Journey To The Moon (1960-72) --------------------------------------------------------------- 9 ILC Developments & Prototype Suits Leading To The Apollo Contract (1960-62)----------------------- 10 SPD-143 Training Suits -------------------------------------------------------------------------------------------- 14 Glove Development For Apollo And The World (1962-Present) -------------------------------------------- 17 AX1H - The First New Design Of The Apollo Program ------------------------------------------------------ 19 AX2H Suits (Sept.
    [Show full text]
  • ILC Dover Using SIMULIA Solutions to Virtually Test Astronaut Habitats
    DS PLM SUCCESS STORY ILC Dover Using SIMULIA solutions to virtually test astronaut habitats Overview Challenge Designing products for earth and Launching a house into space ILC Dover needed to design a beyond ILC Dover’s engineers are working on the lightweight, inflatable, soft goods Leader in the development of flexible answer to that down-to-earth question. In habitat for astronauts that can be deployed, and withstand extended material systems that withstand extreme partnership with several different branches time, in the extreme environment of environments, Delaware-based ILC Dover of NASA, including Langley and the Johnson the Moon or Mars designs both hardware and soft goods Space Center, the company has been for the wide-ranging challenges of space developing ideas for different configurations Solution exploration. It made spacesuits for NASA’s of lightweight space habitat structures. Abaqus FEA is used to test virtual Apollo astronauts in the 1960s and 70s and “There’s a keen interest among the models of habitat fabric and webbing under varying load scenarios to gear for the space shuttle crew that repaired Constellation management and engineers for evaluate the robustness of the the Hubble telescope. ILC Dover makes a soft goods solutions,” said Cliff Willey, structure’s design multitude of earthbound commercial products ILC Dover program manager of space as well, from innovative containment systems inflatables. “When you are launching Benefits for packaging powder pharmaceuticals to equipment into space on a rocket, everything Realistic simulation allows testing highly advanced protective military gear. needs to be as lightweight as possible, of design integrity on earth, avoids expensive prototyping of advanced packed densely and easily expanded once materials and provides significant time ILC Dover’s latest out-of-this-world product is on the moon’s surface.
    [Show full text]
  • Phase VI Advanced EVA Glove Development and Certification for the International Space Station
    2001-01-2163 Phase VI Advanced EVA Glove Development and Certification for the International Space Station David Graziosi and James Stein ILC Dover, Inc. Amy Ross and Joseph Kosmo NASA Johnson Space Center Copyright © 2001 Society of Automotive Engineers, Inc. ABSTRACT in glove design for International Space Station (ISS) assembly, a completely new glove was developed Since the early 1980’s, the Shuttle Extra Vehicular retaining little of the previous design except for some of Activity (EVA) glove design has evolved to meet the the materials technology. This new design incorporated challenge of space based tasks. These tasks have materials technology lessons learned from the 4000 typically been satellite retrieval and repair or EVA based Series glove program, but otherwise attempted and flight experiments. With the start of the International made quantum improvements in glove design. Space Station (ISS) assembly, the number of EVA based missions is increasing far beyond what has been The Phase VI glove is the first EVA glove to be required in the past; this has commonly been referred to developed completely with computer aided design. as the “Wall of EVA’s”. Phase VI glove sizes are being developed as custom gloves for International Space Station (ISS) To meet this challenge, it was determined that the Extravehicular (EV) Crewmembers. The previous glove evolution of the current glove design would not meet designs were based on a standard sizing system that future mission objectives. Instead, a revolution in glove was modified, if necessary, for a particular crewmember. design was needed to create a high performance tool As with previous designs, the custom size development that would effectively increase crewmember mission process starts with a hand cast but beyond that the efficiency.
    [Show full text]
  • Spacesuits and EVA Gloves Evolution and Future Trends of Extravehicular Activity Gloves
    View41st metadata, International citation Conference and similar onpapers Environmental at core.ac.uk Systems AIAA brought2011-5147 to you by CORE 17 - 21 July 2011, Portland, Oregon provided by PORTO Publications Open Repository TOrino Spacesuits and EVA Gloves Evolution and Future Trends of Extravehicular Activity Gloves M. Mehdi S. Mousavi 1, Elisa Paola Ambrosio 2, Silvia Appendino 3, Fai Chen Chen 4, Alain Favetto 5, Diego Manfredi 6, Francesco Pescarmona 7, Aurelio Somà 8 Italian Institute of Technology, Center for Space Human Robotics, Corso Trento 21, 10129, Torino, Italy The total time of Extravehicular Activity (EVA) performed by astronauts has increased significantly during the past few years. On the other hand, the bulk and stiffness of the suit itself and in particular of the gloves generate some difficulties for the astronauts to perform their tasks in space. Therefore, it is necessary to improve the EVA glove technology for future needs. Since a lack of categorized information for those who want to improve EVA gloves is evident, in this work a survey on related literature has been carried out and fundamental data has been categorized. The paper starts with an overview on the historical and chronological progress of EVA suits and EVA gloves followed by a review of the previously demonstrated EVA gloves including American and Russian ones. The remaining part of the paper is dedicated to the characteristics of current EVA gloves and to present and future trends in research for further improvements. I. Introduction NE of the most promising topics in space related research is the astronaut’s Extravehicular Activity (EVA) Ospacesuit.
    [Show full text]
  • Highly Potent Active Pharmaceutical Ingredients Containment
    WHITEPAPER Highly Potent Active Pharmaceutical Ingredients Containment A FULL LIFECYCLE SAFETY INNOVATION Executive Summary As leaders in the field of powder containment, ILC Dover has vast experience in the delivery and testing of flexible film isolator technology for hazardous API containment applications. Now, with the acquisition of Solo Containment into the ILC Dover family, we can bring in extensive front-end application risk and hazard assessment skills with a methodology for SOP development. This provides an enhanced Full Lifecycle Safety structure that ensures our customers can enjoy the highest standards of operator protection from single-use flexible film containment systems. © Copyright, ILC Dover LP 2 A Brief History As early as 1989, Solo Containment’s Martyn Ryder was looking at environmental monitoring systems to deliver concise information about exposure potential of various pharmaceutical operations and the performance of containment systems. In the first investigation, it was realized that the recognized dust-in-air monitoring practice of Gravimetric sampling (as used in 1989) was not sufficiently accurate for “containment” applications. Gravimetric was sufficiently accurate for industrial dust mitigation but no more. An assay method was developed using acetaminophen as a surrogate API using HPLC to analyze the complete filter head in solution the LOQ was 0.090 +/- 0.002 µg/M³ with 95% confidence. This test method was applied to a powder dispensing booth over a five-day period along with real-time aerosol monitoring. The data over the five days of testing revealed significant variations in exposure levels between operator groups, and the real-time monitoring revealed that instantaneous exposure dramatically increased as the operator reached into the powder drum.
    [Show full text]
  • Expandable Habitat Structures for Long Duration Lunar Missions
    Expandable Habitat Structures for Long Duration Lunar Missions Phil Spampinato Manager Space Products, ILC Dover LP February 27, 2008 1 Habitat Classification Habitat Construction Classes • Pre Integrated (Hard Shell) • Pre-Fabricated (Expandable or Assembled) • In-Situ Resource Construction (Caves, Lunar Concrete, etc.) 2 Technical Challenges for Lunar Habitation Structural Challenges • Mass (structure, launch systems, etc.) • Volumetric Efficiency (ratio of launch volume to deployed volume) • Leak Detection / Health Monitoring • Dust Mitigation • Radiation Protection • Equipment Interfaces • Human Interface • Thermal Regulation • Handling / Moving • Couplings between modules • Uneven terrain 3 Recent Developments in Lunar Habitats Recent Development Efforts • Modeling & Analysis • Testing in Laboratory Environments • Testing in Analog Environments • Materials Development 4 Leveraging Proven Expandable Technologies Airbags Space Systems Space Suits Lunar Habitat Studies LAT Space Driven Habitats Habitat Dev’t Lunar Habitats Radome Terrestrial Systems PPE CBRN Shelters (TCPS/M28) BIO Isolation 5 Intelligent Flexible Materials (InFlex) Signal Transfer Systems (wireless & wired) Structural Health Monitoring & Leak Self Healing Bladder Materials Detection Exploration Applications Anti-Microbial Materials Enhanced Radiation Protective Materials Using Multi-functionality to reduce mass and improve safety Localized Power Generation & Storage Low Permeation Materials 6 Expandable Lunar Habitat Demonstrator Studies: • Packing & Deployment • Crew
    [Show full text]
  • Extravehicular Activity
    Extravehicular Activity • Full pressure suits and high-altitude aviation • Early human space program • Operational suits • Interfaces to habitats and rovers • Spacesuit alternatives © 2019 David L. Akin - All rights reserved http://spacecraft.ssl.umd.edu U N I V E R S I T Y O F Extravehicular Activity MARYLAND 1 ENAE 697 - Space Human Factors and Life Support Spacesuit Functional Requirements A suit has to • Provide thermal control • Provide a breathable atmosphere • Hold its shape • Move with the wearer • Protect against external threats • Provide communications and data interactions U N I V E R S I T Y O F Extravehicular Activity MARYLAND 2 ENAE 697 - Space Human Factors and Life Support Wiley Post - B. F. Goodrich, 1934 U N I V E R S I T Y O F Extravehicular Activity MARYLAND 3 ENAE 697 - Space Human Factors and Life Support “Tomato Worm” Suits - c. 1940 U N I V E R S I T Y O F Extravehicular Activity MARYLAND 4 ENAE 697 - Space Human Factors and Life Support XMC-2 Full Pressure Suit (ILC - 1955) U N I V E R S I T Y O F Extravehicular Activity MARYLAND 5 ENAE 697 - Space Human Factors and Life Support Flat Panel Joint U N I V E R S I T Y O F Extravehicular Activity MARYLAND 6 ENAE 697 - Space Human Factors and Life Support Rolling Convolute - Blade Joint U N I V E R S I T Y O F Extravehicular Activity MARYLAND 7 ENAE 697 - Space Human Factors and Life Support Rolling Convolute Arm U N I V E R S I T Y O F Extravehicular Activity MARYLAND 8 ENAE 697 - Space Human Factors and Life Support Toroidal Joint Construction U N I V E R S I T Y
    [Show full text]
  • ILC Dover Supporting Boeing's CST-100 Starliner
    ILC Dover supporting Boeing’s CST- 100 Starliner ILC Dover, LP produces the landing airbag and up-righting float systems for Boeing’s CST-100 Starliner. Credit: Boeing ILC Dover, LP Description: ILC Dover was founded in 1947 as the Government and Industrial division of International Latex Corporation, located in Dover, Delaware. By 1965 it was known as ILC Industries and in 1974 it became ILC Dover. In 1975, ILC Dover consolidated all of its operations in one plant located in Frederica, Delaware where it is headquartered today. Recognized globally for flexible containment solutions, ILC Dover serves customers in a diverse range of industries, including pharmaceutical and biopharmaceutical manufacturing, personal care, food and beverage, chemical, aerospace, healthcare and government agencies. Support for Boeing's CST-100 Starliner Program: In support of Boeing's Commercial Crew Transportation System (CCTS), called the CST-100 Starliner, ILC Dover designed and manufactures the landing airbags and up-righting floats to support landings on land or water. The CST-100 Starliner is designed for land-based returns rather than water returns, a first for a space capsule built in the United States. ILC Dover designed and manufactured an airbag system to absorb the shock of impact, protecting crewmembers and the vehicle upon return to earth from space. The up-righting floats provide the CST-100 Starliner vehicle up-righting capability during an emergency water landing facilitating the crewmembers safe exit from the vehicle. Interesting Facts: • ILC Dover designed and manufactured the Apollo space suits that provided the life support necessary for 12 astronauts to survive on the moon as well as protect the many other Apollo, Skylab and ASTP mission astronauts throughout the earlier manned missions.
    [Show full text]