Lithium Rechargeable Pouch Flexible Cells Market October 2018

Total Page：16

File Type：pdf, Size：1020Kb

Lithium Rechargeable Pouch Flexible Cells Market October 2018 Shmuel De-Leon Shmuel De-Leon Energy, Ltd. www.sdle.co.il [email protected] 1 Flexible Batteries – The Need Flexible devices: Smart cards, Wearable Electronic, Flexible displays, Medical and Cosmetic… 2 4 Flexible Battery Requirements 1. Thin pouch cells – Less than 1mm thickness 2. Rolled up, Twisted, Bent 3. High energy density 4. Reasonable Power density 5. Good cycle life 6. Wide operating temperatures 7. Good safety 8. Low cost 5 Flexible Battery Technology 1. Anode, Cathode and Separator need to be flexible 2. One approach is to use polymer binders to fabricate composite electrodes where conductive additives are added to enhance their conductivity 3. Electrode materials can be printed or coated onto flexible substrates 4. Cells are assembled into flexible pouch packaging to maintain bendability 5. Others approaches include the filtering of electrode suspension through filters to form free-standing films, or use flexible matrix to hold electrode materials 6 Flexible Li-Ion Battery 7 8 3DBattery Israel https://www.3dbattery.co.il New Israeli battery startup Bright Volt http://www.brightvolt.com Excellatron Excellatron has been engaged in the development of production technology for TFB (thin film batteries). Rechargeable lithium and lithium-ion thin film solid-state battery technology was originally developed at the Oak Ridge National Laboratory (ORNL). Thin Flexible Profile - Excellatron has developed a low temperature deposition process that enables us to use flexible, polymer foil as the substrate. This technology largely reduces the production cost of thin film batteries and makes flexible batteries a reality. •http://www.excellatron.com/ Front Edge http://www.frontedgetechnology.com/ ITN Energy Systems http://www.itnes.com/ Jenax http://jenaxinc.com/product/batteries/ 15 LG Chem LG Chem Flexible Cable Battery Libest Korea http://www.libest.co.kr/ Dr. Elen Kim [email protected] +82 10 7438 0304 Panasonic 21 Prologium Samsung 26 STMicroelectronics Summary 1. Several companies developing lithium rechargeable flexible batteries 2. The market is here and will to pay 3. Technology is still under development 4. We can expect first mass production in a range of 2-5 years from now 5. More details in our flexible li-ion battery market report 28 Shmuel De-Leon Energy, Ltd. Mazal Arie 10, Hod-Hasharon, Israel 45309 Tel/Fax: 972-77-5010792, Mobile: 972-52-8601517 www.sdle.co.il, www.batteriesdatabase.com [email protected] Information in this report was obtained by: 1. Public web sources. 2. Shmuel De-Leon Battery/Energy Sources DataBase ® (Includes 30,000 cell PDF data sheets). 3. Shmuel De-Leon Batteries & Fuel Cells Seminar ® presentations. 29.

Copy Link

Recommended publications

HIGH ENERGY DENSITY BATTERY for WEARABLE ELECTRONICS and SENSORS Thesis Submitted to the School of Engineering of the UNIVERSITY
HIGH ENERGY DENSITY BATTERY FOR WEARABLE ELECTRONICS AND SENSORS Thesis Submitted to The School of Engineering of the UNIVERSITY OF DAYTON In Partial Fulfillment of the Requirements for The Degree of Master of Science in Electrical Engineering By Asha Palanisamy Dayton, Ohio December, 2016 HIGH ENERGY DENSITY BATTERY FOR WEARABLE ELECTRONICS AND SENSORS Name: Palanisamy, Asha APPROVED BY: ___________________________ ___________________________ Guru Subramanyam, Ph.D. Jitendra Kumar, Ph.D. Advisory Committee Chairman Advisory Committee Co-Chairman Department Chair and Professor Senior Research Scientist Department of Electrical and University of Dayton Research Computer Engineering Institute ___________________________ Vamsy Chodavarapu, Ph.D. Committee member Associate Professor Department of Electrical and Computer Engineering ___________________________ ___________________________ Robert J. Wilkens, Ph.D., P.E. Eddy M. Rojas, Ph.D., M.A., P.E. Associate Dean for Research and Innovation Dean, School of Engineering Professor School of Engineering ii © Copyright by Asha Palanisamy All rights reserved 2016 iii ABSTRACT HIGH ENERGY DENSITY BATTERY FOR WEARABLE ELECTRONICS AND SENSORS Name: Palanisamy, Asha University of Dayton Advisors: Dr. Guru Subramanyam & Dr. Jitendra Kumar Wearable electronics and sensors are being extensively developed for several applications such as health monitors, watches, wristbands, eyeglasses, socks and smart clothing. Energy storage devices such as rechargeable batteries make wearable devices to become more independent from power outlets, or in other words, make device portability. Battery energy density determines how long a battery powered device will work before it needs a recharge. Longer the time before battery needs recharge, better it is for device applications. Therefore, the goal of battery researchers and engineers is to develop a battery that can provide high energy density and longer device operation.
[Show full text]
Transparent Lithium-Ion Batteries
Transparent lithium-ion batteries Yuan Yanga, Sangmoo Jeongb, Liangbing Hua, Hui Wua, Seok Woo Leea, and Yi Cuia,1 aDepartments of Materials Science and Engineering and bElectrical Engineering, Stanford University, Stanford, CA 94305 Edited* by Tobin J. Marks, Northwestern University, Evanston, IL, and approved June 20, 2011 (received for review February 20, 2011) Transparent devices have recently attracted substantial attention. trode filled with nanomaterials. The battery appears transparent Various applications have been demonstrated, including displays, as the patterned electrode materials cover only a small portion touch screens, and solar cells; however, transparent batteries, a of the whole area and the pattern features are smaller than key component in fully integrated transparent devices, have not the detection limit of human eyes. Li-ion batteries with different yet been reported. As battery electrode materials are not transpar- transparencies were fabricated. For example, a full cell with an ent and have to be thick enough to store energy, the traditional energy density of 10 Wh∕L, including packaging, is demonstrated approach of using thin films for transparent devices is not suitable. at a transparency of 60%. Furthermore, by aligning multiple Here we demonstrate a grid-structured electrode to solve this transparent batteries in series, the energy stored could scale up dilemma, which is fabricated by a microfluidics-assisted method. easily without sacrificing the transparency of the device. Finally, The feature dimension in the electrode is below the resolution limit we show that such a device is also a powerful tool for in situ of human eyes, and, thus, the electrode appears transparent. More- optical studies of electrochemical reactions in batteries.
[Show full text]
Efforts Towards Practical and Sustainable Li/Na‐Air Batteries
Efforts towards practical and sustainable Li/Na-air batteries Item Type Article Authors Chen, Kai; Huang, Gang; Zhang, Xin-Bo Citation Chen, K., Huang, G., & Zhang, X. (2020). Efforts towards practical and sustainable Li/Na-air batteries. Chinese Journal of Chemistry. doi:10.1002/cjoc.202000408 Eprint version Post-print DOI 10.1002/cjoc.202000408 Publisher Wiley Journal Chinese Journal of Chemistry Rights Archived with thanks to Chinese Journal of Chemistry Download date 28/09/2021 07:09:23 Link to Item http://hdl.handle.net/10754/664977 Chinese Journal of Chemistry CJC 中国化学 - An International Journal Accepted Article Title: Efforts towards practical and sustainable Li/Na-air batteries Authors: Kai Chen, Gang Huang, and Xin-Bo Zhang * This manuscript has been accepted and appears as an Accepted Article online. This work may now be cited as: Chin. J. Chem. 2020, 38, 10.1002/cjoc.202000408. The final Version of Record (VoR) of it with formal page numbers will soon be published online in Early View: http://dx.doi.org/10.1002/cjoc.202000408. ISSN 1001-604X • CN 31-1547/O6 mc.manuscriptcentral.com/cjoc www.cjc.wiley-vch.de Keyword 1, Keyword 2, Keyword 3, Keyword 4, Keyword 5, Chinese Journal Chemistry Authors Up Close Keyword 6 of Chemistry CJC 中国化学 - An International Journal Efforts towards practical and sustainable Li/Na-air batteries Kai Chen,a,b Gang Huang,c and Xin-Bo Zhang *,a,b a State Key Laboratory of Rare Earth Resources Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, P.
[Show full text]
Thin Flexible Lithium-Ion Battery Featuring Graphite Paper Based
169 ARTICLE Thin flexible lithium-ion battery featuring graphite paper based current collectors with enhanced conductivity Hang Qu, Jingshan Hou, Yufeng Tang, Oleg Semenikhin, and Maksim Skorobogatiy Abstract: A flexible, lightweight, and high conductivity current collector is the key element that enables fabrication of a high-performance, flexible lithium-ion battery. Here, we report a thin, lightweight, and flexible lithium-ion battery that uses graphite papers deposited with nano-sized metallic layers as the current collector, LiFePO4 and Li4Ti5O12 as the cathode and anode materials, respectively, and a PE membrane soaked in LiPF6 as the separator. Using thin, flexible graphite paper as a substrate for the current collector instead of a rigid, heavy metal foil enables us to demonstrate an ultra-thin lithium-ion battery (total thickness including encapsulation layers of less than 250 ␮m) that also features a light weight and high flexibility. Key words: lithium-ion batteries, flexible batteries, graphite paper current collectors. Résumé : Un collecteur de courant a` conductivité élevée, a` la fois flexible et léger, constitue un élément clé pour permettre la fabrication d’une batterie au lithium-ion flexible a` haut rendement. Dans le présent article, nous rapportons la fabrication d’une batterie au lithium-ion mince, flexible et légère constituée de collecteurs de courant faits de feuilles de graphite déposées sur des nanocouches métalliques, d’une électrode composée d’une cathode de LiFePO4 et d’une anode de Li4Ti5O12, et d’un séparateur consistant en une membrane imbibée de LiPF6. L’utilisation d’une feuille de graphite flexible comme substrat du collecteur de courant au lieu d’une feuille métallique lourde et rigide nous permet de démontrer la réalisation d’une batterie au lithium-ion ultramince (épaisseur totale comprenant des couches d’encapsulation de moins de 250 ␮m) qui présente également un faible poids et une grande flexibilité.
[Show full text]
MMC-Based SRM Drives with Decentralized Battery Energy Storage System for Hybrid Electric Vehicles
View metadata, citation and similar papers at core.ac.uk brought to you by CORE > REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HEREprovided TO EDIT) by University < of Liverpool1 Repository MMC-Based SRM Drives with Decentralized Battery Energy Storage System for Hybrid Electric Vehicles Chun Gan, Member, IEEE, Qingguo Sun, Jianhua Wu, Wubin Kong, Member, IEEE, Cenwei Shi, Member, IEEE, and Yihua Hu, Senior Member, IEEE Abstract—This paper proposes a modular multilevel converter (MMC)-based switched reluctance motor (SRM) drive with decentralized battery energy storage system (BESS) for hybrid electric vehicle (HEV) applications. In the proposed drive, a battery cell and a half- bridge converter is connected as a submodule (SM), and multiple SMs are connected together for the MMC. The modular full-bridge converter is employed to drive the motor. Flexible charging and discharging functions for each SM are obtained by controlling switches in SMs. Multiple working modes and functions are achieved. Compared to conventional and existing SRM drives, there are several advantages for the proposed topology. A lower dc bus voltage can be flexibly achieved by selecting SM operation states, which can dramatically reduce the voltage stress on the switches. Multilevel phase voltage is obtained to improve the torque capability. Battery state-of-charge (SOC) balance can be achieved by independently controlling each SM. Flexible fault-tolerance ability for battery cells is equipped. The battery can be flexibly charged in both running and standstill conditions. Furthermore, completely modular structure is achieved by using standard half-bridge modules, which is beneficial for market mass production.
[Show full text]
"Advanced Battery Development"
Issue 69 FEV CUSTOMER MAGAZINE CUSTOMER MAGAZINE CUSTOMER "ADVANCED BATTERY DEVELOPMENT" Strong Partner for Battery Development FEV Battery Benchmarking Batteries from a Single Source eDLP – World's largest development and Issue 69 test center for high- voltage batteries Dear Readers, Due to the increasing electrification of vehicle fleets to reduce CO2 and pollutant emissions, batteries for energy storage are a decisive factor for success. This applies not only to the automotive sector, but also to (smaller) commercial vehicle, industrial and marine applications. What all applications have in common is the high development effort for FEV’s partners. In this issue of SPECTRUM, we would like to give you an overview of the competencies FEV can offer to support you in meeting the challenges in this context – from the battery concept to production readiness and beyond, including recycling. In addition to pure battery development, we also address special aspects such as precise monitoring by battery management sys- tems. Furthermore, we present our benchmarking offerings and demonstrate our expertise in battery assembly. Finally, we outline characteristics that arise for the testing of electrified drives and batteries. In a dedicated article on battery testing, we also present the new development and test center for high-voltage energy storage (eDLP) in Sandersdorf-Brehna, Germany, which is the largest facility of its kind in the world. The commissioning of the eDLP will be finalized in the third quarter of this year and will enable FEV to offer all internationally required test methods for high-voltage batteries from the cell to the module to the pack, all at one location.
[Show full text]
Thin Flexible Lithium Ion Battery Featuring Graphite Paper Based
Thin Flexible Lithium Ion Battery Featuring Graphite Paper Based Current Collectors with Enhanced Conductivity Hang Qu 1, Jingshan Hou 1, Yufeng Tang 2, Oleg Semenikihin 3, and Maksim Skorobogatiy 1,* 1 Department of Physics Engineering, Ecole Polytechnique de Montreal, Montreal, Quebec, H3C 3A7, Canada. 2 CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, PR China. 3 Department of Chemistry, Western University, London, Ontario, N6A 5B7, Canada. Abstract: A flexible, light weight and high conductivity current collector is the key element that enables fabrication of high performance flexible lithium ion battery. Here we report a thin, light weight and flexible lithium ion battery that uses graphite paper enhanced with a nano-sized metallic layers as the current collector, LiFePO4 and Li4Ti5O12 as the cathode and anode materials, and PE membrane soaked in LiPF6 as a separator. Using thin and flexible graphite paper as a substrate for the current collector instead of a rigid and heavy metal foil enables us to demonstrate a very thin Lithium- Ion Battery into ultra-thin (total thickness including encapsulation layers of less than 250 μm) that is also light weight and highly flexible. 1 Introduction Many wearable and portable electronic devices require efficient, compliant power sources that can fully function when bent, folded, or compressed. 1 Lithium-ion batteries (LIBs) dominate the portable power-source market due to their high energy density, high output voltage, long-term stability and environmentally friendly operation. 1, 2, 3 High performance flexible LIBs are considered to be one of the most promising candidates of the power sources for the next generation flexible electronic devices.
[Show full text]
Kammoun-Dissertation-2016
©Copyright by Mejdi Kammoun 2016 All Rights Reserved Flexible and Stretchable Lithium-Ion Batteries Based on Solid Polymer Nanocomposite Electrolyte A Dissertation Presented to the Faculty of the Department of Mechanical Engineering University of Houston Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy in Mechanical Engineering by Mejdi Kammoun December 2016 Flexible and Stretchable Lithium-Ion Batteries Based on Solid Polymer Nanocomposite Electrolyte Mejdi Kammoun Approved: Chair of the Committee Dr. Haleh Ardebili, Associate Professor,Mechanical Engineering Committee Members: Dr. Yashashree Kulkarni, Associate Professor, Mechanical Engineering Dr. Jae-Hyun Ryou, Assistant Professor, Mechanical Engineering Dr. Dong Liu, Associate Professor, Mechanical Engineering Dr. Yan Yao, Assistant Professor, Electrical & Computer Engineering Dr. Suresh K. Khator, Associate Dr. Pradeep Sharma, Department Dean, Cullen College of Engineering Chair of Mechanical Engineering 1 Acknowledgements First and foremost, I would like to thank my advisor, Dr. Haleh Ardebili, for giving me the opportunity to work within her group, and for all the support provided inside and outside the academic work. Her intellectual support at various stages of this work has been invaluable in enabling me to carry this work to completion. I cannot go without expressing my admiration to her genuine ideas and physical intuitions that make her a successful advisor. She always trusted me as an independent researcher and was open to new ideas while making sure our research stayed in the right path. Second, I would like to thank the chairman of the mechanical engineering department, Dr. Pradeep Sharma, for all his advices and his continuous support. Third, I would like to acknowledge my committee members, Dr.
[Show full text]
Lithium Technology Corp. Powers Hybrid Electric Supercar INSIDE
July/August 2008 www.BatteryPowerOnline.com Volume 12, Issue 4 Lithium Technology Corp. Powers Hybrid Electric Supercar INSIDE Heinz-Harald Frentzen, an ex-Formula One (F1) racer Battery Power 2008 and champion, and Gumpert Sportwagenmanufaktur GmbH Conference Preview p 8 entered a hybrid electric version of its Apollo supercar into this year's Nurburgring 24 hour race, which was held at end Optimizing Power Source of May. The car was powered by a battery solution from Selection in the Design Lithium Technology Corp. (LTC). The car was piloted by Process p 11 Mr. Dirk Muller and Mr. Frentzen. "We are pleased to co-sponsor the first hybrid electric Portable Power: Smaller, version of the Apollo, produced by Gumpert in Germany, Lighter and Affordable p 12 and lend our technology to a movement that increases public awareness of hybrid electric vehicle (HEV) performance and encourages advances in HEV technology," said Dr. Klaus Brandt, CEO of LTC. "LTC believes that Racing plays a sig- nificant role in pioneering the use of new technologies, such as lithium ion batteries, and offers the opportunity for us to demonstrate the performance of our batteries under extreme conditions while exhibiting the benefits and usability of our products to traditional car manufacturers." Battery Power 2008 The hybrid Apollo used a 3.3 liter V8 bi-turbo petrol mill Conference Brochure with a 100 kW electric motor. The 9 kWh GAIA battery was p 12-13 made of 90 high power 27 Ah cells connected in series and weighed about 190 kilograms. The battery included an Circuit Protection Designs advanced battery management system (BMS) that transmit- For a Mobile World p 13 ted battery performance data via satellite for monitoring and enhance performance control of the technical team.
[Show full text]
Flexible Graphene-Based Lithium Ion Batteries with Ultrafast Charge and Discharge Rates
Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates Na Lia,b,1, Zongping Chena,1, Wencai Rena, Feng Lia, and Hui-Ming Chenga,2 aShenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; and bDepartment of Materials Science & Engineering, School of Chemistry and Materials Science, University of Science and Technology of China, Hefei 230026, China Edited* by Mildred S. Dresselhaus, Massachusetts Institute of Technology, Cambridge, MA 02139 and approved September 17, 2012 (received for review June 13, 2012) There is growing interest in thin, lightweight, and flexible energy nanomaterials (16–18). Based on these strategies, electrodes storage devices to meet the special needs for next-generation, with a highly conductive pathway for electrons, a short ion dif- high-performance, flexible electronics. Here we report a thin, fusion length, and a fast transport channel for the ion flux can be lightweight, and flexible lithium ion battery made from graphene fabricated for fast charge and discharge. A series of electro- foam, a three-dimensional, flexible, and conductive interconnected chemical active materials (4, 15–18) and three-dimensional (3D) network, as a current collector, loaded with Li4Ti5O12 and LiFePO4, hybrid electrodes (5, 14) have been recently fabricated to as- for use as anode and cathode, respectively. No metal current col- semble rechargeable batteries with high charge and discharge lectors, conducting additives, or binders are used. The excellent rates. For example, Braun et al. (5) recently fabricated a mac- electrical conductivity and pore structure of the hybrid electrodes roporous nickel network for battery electrodes with ultrafast enable rapid electron and ion transport.
[Show full text]
Flexible Graphene-Based Lithium Ion Batteries with Ultrafast Charge and Discharge Rates
Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates Na Lia,b,1, Zongping Chena,1, Wencai Rena, Feng Lia, and Hui-Ming Chenga,2 aShenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; and bDepartment of Materials Science & Engineering, School of Chemistry and Materials Science, University of Science and Technology of China, Hefei 230026, China Edited* by Mildred S. Dresselhaus, Massachusetts Institute of Technology, Cambridge, MA 02139 and approved September 17, 2012 (received for review June 13, 2012) There is growing interest in thin, lightweight, and flexible energy nanomaterials (16–18). Based on these strategies, electrodes storage devices to meet the special needs for next-generation, with a highly conductive pathway for electrons, a short ion dif- high-performance, flexible electronics. Here we report a thin, fusion length, and a fast transport channel for the ion flux can be lightweight, and flexible lithium ion battery made from graphene fabricated for fast charge and discharge. A series of electro- foam, a three-dimensional, flexible, and conductive interconnected chemical active materials (4, 15–18) and three-dimensional (3D) network, as a current collector, loaded with Li4Ti5O12 and LiFePO4, hybrid electrodes (5, 14) have been recently fabricated to as- for use as anode and cathode, respectively. No metal current col- semble rechargeable batteries with high charge and discharge lectors, conducting additives, or binders are used. The excellent rates. For example, Braun et al. (5) recently fabricated a mac- electrical conductivity and pore structure of the hybrid electrodes roporous nickel network for battery electrodes with ultrafast enable rapid electron and ion transport.
[Show full text]
On the Development of Flexible Lithium-Ion Battery Architectures
FROM 2D TO 3D: ON THE DEVELOPMENT OF FLEXIBLE AND CONFORMAL LI-ION BATTERIES VIA ADDITIVE MANUFACTURING A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy By AARON JOSEPH BLAKE M.S.E., Wright State University, 2013 B.S.M.E., Wright State University, 2012 __________________________________________ 2016 Wright State University WRIGHT STATE UNIVERSITY GRADUATE SCHOOL December 01, 2016 I HEREBY RECOMMEND THAT THE DISSERTATION PREPARED UNDER MY SUPERVISION BY Aaron Joseph Blake ENTITLED From 2D to 3D: On the Development of Flexible and Conformal Li-Ion Batteries via Additive Manufacturing BE ACCEPTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF Doctor of Philosophy. ___________________________________ Hong Huang, Ph.D. Dissertation Director ___________________________________ Frank W. Ciarallo, Ph.D. Director, Ph.D. in Engineering Program ___________________________________ Robert E. W. Fyffe, Ph.D. Vice President for Research and Dean of the Graduate School Committee on Final Examination ________________________________ Hong Huang, Ph.D. ________________________________ Sharmila M. Mukhopadhyay, Ph.D. ________________________________ Henry D. Young, Ph.D. ________________________________ Christopher Muratore, Ph.D. ________________________________ Michael F. Durstock, Ph.D. ii ABSTRACT Blake, Aaron Joseph, Ph.D. in Engineering Program, Department of Mechanical and Materials Engineering, Wright State University, 2016. Title: From 2D to 3D: On the Development of Flexible and Conformal Li-Ion Batteries via Additive Manufacturing. The future of electronic devices, such as smart skins, embedded electronics, and wearable applications, requires a disruptive innovation to the design of conventional batteries. This research was thus aimed at leveraging additive manufacturing as a means to invigorate the design of next-generation Li-ion batteries to meet the emerging requirements of flexible electronics.
[Show full text]