DOCSLIB.ORG

Colour Temperature Measuring Fittings LED Lamp Information

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Colour Temperature Measuring Fittings LED Lamp Information LED lamp information Typical LED watts UP UP TO GU10 10 60 E14/ 10 40 E14/ 7 7 watts watts watts TO G9 watts watts E27 watts E27 50 33 watts watts LUMENS 600-800 LUMENS 400-500 LUMENS 400-500 LUMENS 600-800 Colour temperature It is important to think about your light source when buying your lamps. LED light source is measured by brightness and colour temperature which dictates how cool or warm the light is. As an example, a spot light is normally much brighter in comparison to the light given by a candle light. Below is an example of the light sources. All of the LED light sources quoted in our catalogue are within a tolerance of +/- 10%. All Searchlight products are sold excluding lamps with the exception of IP rated products which are sold including lamps (Refer to price list for additional lamp information) Warm white 3000k Cool white 4000k Measuring fittings Flush fitting Spotlights LENGTH WIDTH WIDTH HEIGHT HEIGHT Semi-flush Pendants Wall lights DROP HEIGHT HEIGHT HEIGHT HEIGHT PROJECTION WIDTH WIDTHWIDTH 02 02_03_Things_You_Need_To_Know.indd 2 8/9/17 15:43 Information you need to know? Abbreviations ZONE 0 AB Antique Brass Finish 60CM 60CM ZONE 1 AM Amber ZONE 2 OUTSIDE THE AN Antique Nickel Finish ZONES AS Antique Silver Finish BC Black Chrome Finish BG Black Gold Finish BK Black BL Blue 225CM BR Brown 60CM BW Black White BZ Bronze Finish CC Chrome Finish CL Clear CR Cream CU Copper Finish GO Gold Finish GR Green GY Grey MI Mink IP rating = Ingress Protection rating. NG No Glass outside OR Orange zone 0 zone 1 zone 2 zone PB Polished Brass Finish The area inside the bath or The area above the bath Covers an area 0.6 metres Covers any area outside shower tray. Fittings must or shower up to a height wide immediately next PI Pink Zones 0, 1 and 2. There is be rated at IPX7 or higher of 2.25 metres. Fittings to, and all around Zone 1. no IP requirement in this PW Pewter Finish (protected against must be rated at IPX5 or The 60cm area around zone. immersion in water). higher (protected from washbasins should RE Red Bathrooms are allowed to jets of water). also be treated as zone 2. contain a socket outlet, RU Rustic The minimum rating this must be located 3 is IPX4. If there is a metres outside Zone 1. SI Silver Finish likelihood of water jets Lighting circuits and any SM Smoked Finish being used for cleaning socket-outlet circuit in a purposes in Zone 2, room containing a bath SN Satin Nickel Finish a minimum of IPX5 and/or shower must be is required. SS Satin Silver Finish provided with 30mA RCD protection. WH White Symbols Feature icons Crystal Switched Adjustable Arms The fitting is controlled by a Flexible fittings for maximum G4 Switched ADJUSTABLE rocker switch. ARMS convenience. glass G4 GU10 GU10 Illuminated Switch Paintable The fitting is controlled by a The fitting can be painted to chandelier G9 illuminated switch. Paintable suit any decor. G9 R7s Linear Convertible cleaner R7S Three Stage Touch The fitting can be converted Touch Low, medium and high. E27 Edison Screw Convertible from pendant to flush. E27 For best results always E14 Edison Screw Dimmable E14 The fitting can be dimmed using Integrated LED use Crystal Cleaner. Dimmable a suitable dimmer. The fitting uses the latest Fluorescent T5 Code P21 T5 integrated LED technology. Easy Fit (Sold as a pack of 12) Compact Fluorescent 2D The fitting requires no electrical Easy Fit wiring. Guarantee Fluorescent 2GX13 2GX13 The finish is guaranteed for Remote Control three years, except within five Fluorescent GX53 miles of the coastline. GX53 Remote Inc The fitting is operated and Outdoor lighting only Battery Operated supplied with a remote control. 03 02_03_Things_You_Need_To_Know.indd 3 8/11/17 11:13 Wall C 5115-LED D 5115 A 4115-LED B 4115 Switched E 6651CC Product Max Colour Dimensions Replacement Item Finish Lamp Lumens Code Watt Temp Height Width Projection Shade A 4115-LED Metal.Chrome / Glass 1 x 5W 500 3000k 29 17 12 GO4115 B 4115 Metal.Chrome / Glass R7S 1 x 80W - - 29 17 12 GO4115 C 5115-LED Metal.Chrome / Clear and Frosted Glass 1 x 5W 500 3000k 30 15 12 GO5115 D 5115 Metal.Chrome / Clear and Frosted Glass R7S 1 x 80W - - 30 15 12 GO5115 E 6651CC Metal.Chrome / Glass 12W 1200 3000k 28 20 9 GO6651 329 328_329_Wall.indd 329 8/10/17 17:13.
Load more

Recommended publications
  • Evaluation of Electric Lighting Products
    U.S. CONSUMER PRODUCT SAFETY COMMISSION DIRECTORATE FOR ENGINEERING SCIENCES EVALUATION OF ELECTRIC LIGHTING PRODUCTS December 2007 Anna Luo Electrical Engineer Division of Electrical Engineering Directorate for Engineering Sciences This report has not been reviewed or approved by, and may not necessarily reflect the views of, the Commission. Table of Contents I. INTRODUCTION...................................................................................................................... 1 II. PROJECT OUTLINE................................................................................................................ 1 III. VOLUNTARY STANDARDS................................................................................................ 1 IV. TERMINOLOGY.................................................................................................................... 2 V. PRODUCT CHARACTERISTICS........................................................................................... 3 VI. TASK 1 – Review of Incident Data......................................................................................... 4 A. Portable Lighting Incidents ............................................................................................ 4 B. Installed Lighting Incidents............................................................................................ 5 C. Incidents Associated with Other Factors........................................................................ 6 VII. TASK 2 - Inspection of Collected Samples ..........................................................................
    [Show full text]
  • Light Bulbs + Sockets Light Bulbs + Sockets Prices See Main Assortment Shop.Griederbauteile.Ch Prices See Treasure Trove Shop.Griederbauteile.Ch
    Light Bulbs + Sockets Light Bulbs + Sockets Prices see Main Assortment shop.griederbauteile.ch Prices see Treasure Trove shop.griederbauteile.ch E10 Page 2 – 3 Multi LED Page 3 E5/8 + E5.5/16 Page 4 E14 E27 + E40 (Projection Lamps) Page 5 T2 Ba7s Ba9s Page 6 + 7 Ba15s + Ba15d Page 7 Ba20s + Ba20d Page 8 T¾ Page 8 + 9 T1 T¼ + T1½ + T1¾ Page 9 – 13 Special Bulbs + Wedge Base Page 14 LED Lamps + Projection Lamps Page 15 Halogen + Fluorescent Page 16 Festoon Page 17 Telecommunication Bulbs Page 17 – 20 Glow Lamps Page 20 Indicator Lights Page 21 Sockets Page 21 – 23 Subject to alterations and errors. www.griederbauteile.ch Pictures are a guide only. 1 Edition April 2017 Light Bulbs + Sockets Light Bulbs E10 Spherical Shape Order No Voltage Current Pow er Bailey Number EBA.0110 1.5V 100mA 150mW E24001090 EBA.0210 2.5V 100mA 250mW E24001100 EBA.0230 2.5V 300mA 750mW E24002300 EBA.0407 3.8V 80mA 266mW E24003070 EBA.0430 3.8V 300mA 1140mW E24003301 EBA.0605 6V 50mA 300mW E24006050 EBA.0610 6V 100mA 600mW E24006100 EBA.0630 6V 300mA 1800mW E24006300 EBA.1205 12V 50mA 600mW E24012050 EBA.1210 12V 100mA 1200mW E24012100 EBA.1225 12V 250mA 3W E24012250 EBA.2402 24V 20mA 480mW EBA.2405 24V 50mA 1200mW E24024050 EBA.2412 24V 125mA 3W E24024125 EBA.3602 36V 20mA 720mW EBA.3605 36V 50mA 1800mW E24036050 EBA.3608 36V 83mA 3W EBA.4802 48V 20mA 960mW EBA.4804 48V 40mA 1920mW EBA.4806 48V 63mA 3W EBA.6002 60V 20mA 1200mW EBA.6004 60V 40mA 2400mW Light Bulbs E10 Cylindrical Shape Order No Voltage Current Pow er Bailey Number EBB.0230 2.5V 300mA 850mW E28002300
    [Show full text]
  • History of Electric Light
    SMITHSONIAN MISCELLANEOUS COLLECTIONS VOLUME 76. NUMBER 2 HISTORY OF ELECTRIC LIGHT BY HENRY SGHROEDER Harrison, New Jersey PER\ ^"^^3^ /ORB (Publication 2717) CITY OF WASHINGTON PUBLISHED BY THE SMITHSONIAN INSTITUTION AUGUST 15, 1923 Zrtie Boxb QSaftitnore (prcee BALTIMORE, MD., U. S. A. CONTENTS PAGE List of Illustrations v Foreword ix Chronology of Electric Light xi Early Records of Electricity and Magnetism i Machines Generating Electricity by Friction 2 The Leyden Jar 3 Electricity Generated by Chemical Means 3 Improvement of Volta's Battery 5 Davy's Discoveries 5 Researches of Oersted, Ampere, Schweigger and Sturgeon 6 Ohm's Law 7 Invention of the Dynamo 7 Daniell's Battery 10 Grove's Battery 11 Grove's Demonstration of Incandescent Lighting 12 Grenet Battery 13 De Moleyns' Incandescent Lamp 13 Early Developments of the Arc Lamp 14 Joule's Law 16 Starr's Incandescent Lamp 17 Other Early Incandescent Lamps 19 Further Arc Lamp Developments 20 Development of the Dynamo, 1840-1860 24 The First Commercial Installation of an Electric Light 25 Further Dynamo Developments 27 Russian Incandescent Lamp Inventors 30 The Jablochkofif " Candle " 31 Commercial Introduction of the Differentially Controlled Arc Lamp ^3 Arc Lighting in the United States 3;^ Other American Arc Light Systems 40 " Sub-Dividing the Electric Light " 42 Edison's Invention of a Practical Incandescent Lamp 43 Edison's Three-Wire System 53 Development of the Alternating Current Constant Potential System 54 Incandescent Lamp Developments, 1884-1894 56 The Edison " Municipal
    [Show full text]
  • General Bulb
    General Bulb Standard Ultra Bright 7 SMT LED Light-45859……………………………...…………………………..1 Standard Ultra Bright 6 Watt LED Light-78469……………………………………..…..……..………...1 Standard Ultra Bright Five 1 Watt LED Light-42522……..……………………………………………...2 Side Firing LED Light-45376………..……………………………………………………………………2 GU24 5 Watt LED Light-24325……………………………….……………………………………...…..2 Ultra Bright Candle LED Light-63452………………………...………………………………………….3 8 Watt LED Light Bulb-56963……………………………………………………………………………3 1.3 Watt LED Light Bulb-34678……………………...……………………………………………..……3 24 LED Light Bulb-48645……………………………………………………………………..………….4 3 Watt LED Light Bulb-75644……………….…………………………………………………………...4 104 LED 5 Watt LED Light Bulb-47208…………………………………………………………………4 Low Profile Candle E14 Base LED Light Bulb-34324………………………………………………..….5 Motion activated LED Light Bulb-45703…….…………………………………………………………..5 5 Watt LED Light-83428……………..…………………………………………………………………...5 8 ½ Watt L.E.D. Light Bulb-47856………………………………………………………………...……..6 13.5 Watt 88 Super Flux L.E.D. Light Bulb-43567…………………………………...………………….6 20 Watt 128 Super Flux L.E.D. Light Bulb-73215……………………………………………………….6 Globe LED Lamp E12 Base-19567…………….…………...………………………………………..…...7 High Power Appliance LED Light Bulb-83548…………………………….…………………………….7 1.5 Watt Appliance E17 Base LED Light Bulb-94753…………………………………………………...7 Standard 3 Watt LED Light Bulb-23430…………………………………………………………...……..8 7 Watt LED Light Bulb-74556……………….…………………………………………………………...8 11 Watt LED Light Bulb-34562…………………….……………...………..……………………………8 Globe LED Light Bulb-78427………………….…………………………………………………………9
    [Show full text]
  • Efficient Lighting Using Compact Fluorescent Lamps and Fixtures
    APPLICATION NOTE An In-Depth Examination of an Energy Summary Efficiency Technology Compact fluorescent lamps (CFLs) can provide energy savings of up to 75 per- cent and slash maintenance costs in many common applications formerly Efficient Lighting dominated by incandescents. The chal- lenge is to obtain excellent visual qual- ity with these compact sources, as they Using Compact are often misapplied. This application note draws on the experience of lighting Fluorescent Lamps designers, manufacturers, and product users to provide guidance in how—and and Fixtures how not—to apply compact fluores- cents. CFLs come in several sizes and con- figurations, and can be applied nearly anywhere that incandescent sources are used for general area lighting. Ap- plications include ceiling downlights, task lights, wall sconces, and pendant and decorative fixtures. But even these Summary .............................................1 versatile light sources cannot be used everywhere, and they must be applied How This Technology Saves carefully to get satisfactory results. Energy .................................................1 Limitations include difficulty in dimming, Types of Compact Fluorescents.......3 the availability of lamps in sizes that fit existing fixtures, sensitivity to frequent Applicability ........................................5 on-off cycling, and low beam power be- cause of the diffuse linear light source. Field Observations to Assess In addition, lamp orientation and tem- Feasibility............................................7 perature need to be considered, since Estimation of Energy Savings ...........8 they can affect light output. Cost and Service Life .........................9 How This Technology Laws, Codes, and Regulations........10 Saves Energy Definitions of Key Terms .................10 References to More Information......11 Compact fluorescent lamps are simply miniature versions of full-sized fluores- Major Manufacturers ........................11 cents, with a few key differences.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 9,144,129 B2 Munday Et Al
    USOO9144129B2 (12) United States Patent (10) Patent No.: US 9,144,129 B2 Munday et al. (45) Date of Patent: Sep. 22, 2015 (54) SWITCHABLE LUMINANCE LED LIGHT 6, 2012, provisional application No. 61/667,982, filed BULB on Jul. 4, 2012. (71) Applicant: The Regents of the University of (51) Int. Cl. California, Oakland, CA (US) H05B 39/00 (2006.01) H05B33/08 (2006.01) (72) Inventors: David Munday, Santa Cruz, CA (US); (52) U.S. Cl. Ryan Baker, Santa Cruz, CA (US); CPC ........ H05B33/0839 (2013.01); H05B33/0803 Julian Dahan, Santa Cruz, CA (US); (2013.01); H05B33/0815 (2013.01); Y02B Russell Petersen, Santa Cruz, CA (US); 20/346 (2013.01) Craig Sloan, Santa Cruz, CA (US) (58) Field of Classification Search None (73) Assignee: THE REGENTS OF THE See application file for complete search history. UNIVERSITY OF CALIFORNLA, Oakland, CA (US) (56) References Cited (*) Notice: Subject to any disclaimer, the term of this U.S. PATENT DOCUMENTS patent is extended or adjusted under 35 8,853.950 B1* 10, 2014 Ch 315/127 U.S.C. 154(b) by 420 days. 2011/O133655w - - A1 6, 2011 Reckerall et. al.. .................. 315, 159 (21) Appl. No.: 13/727,463 * cited by examiner (22) Filed: Dec. 26, 2012 Primary Examiner — Lincoln Donovan O O Assistant Examiner — Khareem EAlmo (65) Prior Publication Data (74) Attorney, Agent, or Firm — Adam Warwick Bell: US 2013/0328493 A1 Dec. 12, 2013 Matthew Rupert Kaser Related U.S. Application Data (57) ABSTRACT (63) Continuation of application No. 13/727,463, filed on A switchable luminance LED light bulb, including embodi Dec.
    [Show full text]
  • Amerbritetm Led Replacement Lamp for Amerlite® Light Series
    AMERBRITETM AMERBRITETM LED REPLACEMENT LAMP F O R AMERLITE® LIGHT SERIES UPGRADE TO THE ELEGANCE OF UNDERWATER PRODUCT FEATURES: LED LIGHTING ɒ AmerBrite color lamps use 36 watts of power, while white lamps The AmerBrite LED lamp brings the luminous splendor of use between 34-51 watts. LED technology to the best-selling Amerlite light series. ɒ Color lamps feature 5 brilliant fixed colors, 7 dazzling pre-programmed light shows. With its convenient Edison screw base, the AmerBrite LED lamp is a ‘plug-and-play’ replacement for Amerlite incandescent bulbs. ɒ The most efficient LED replacement pool lamp on the market. With AmerBrite lamps you’ll experience the efficiency of today’s ɒ Superior reflector design creates more uniform light distribution. best and brightest pool lighting technology—all without the hassle ɒ Lens can be rotated 180 degrees to provide wide or narrow and cost of replacing your existing Amerlite light fixture. beam pattern. Simply unscrew your inefficient, high-wattage incandescent ɒ LED technology provides longer life. bulb and replace with a high-efficiency AmerBrite LED lamp… ɒ Solid state technology with no internal filament. and watch your pool transform into a rejuvenating spectrum of ɒ Available in 120V or 12V versions. breathtaking color, or vibrant white light. ɒ The only UL and cUL Certified LED replacement lamp for Amerlite incandescent fixtures. AN ECO SELECT® BRAND PRODUCT AmerBrite LED lamps have earned the Eco Select brand distinction as one of the “greenest” and most efficient choices from Pentair. LED lights use the least amount of energy of all lighting options and are more durable for longer life.
    [Show full text]
  • Philips Entertainment Lamps Catalogue Philips Entertainment
    Philips Entertainment Lamps catalogue 2013 Philips Entertainment Lamps catalogue ©2013 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. www.philips.com/lighting/entertainment Document order number: 3222 635 66812 02/2013 Data subject to change Special_Lighting_Cover_2013_INT.indd 1 23-01-2013 14:39:38 Special_Lighting_Catalogue_2012_INT.indb 1 29-01-2013 09:11:21 2 Philips Entertainment Lamps catalogue Special_Lighting_Catalogue_2012_INT.indb 2 29-01-2013 09:11:23 Introduction General Introduction Energizing lives with the power of light Contents Today’s entertainment industry calls for lighting solutions that captivate audiences and turn each performance into something magical. Addressing these needs, Philips Special Lighting focuses on creating lamp systems that bring experiences to life, immersing the audience in the emotion and drama. Partners in innovation We develop our cutting-edge lamp technologies in close partnership with luminaire manufacturers around the world, enabling lighting designers to create spectacular experiences in a wide range of entertainment applications. Just have a look at some of our major innovations that have set the pace in the industry: • Platinum • Gold™ FastFit • Gold™ MiniFastFit • StagePainter You will find more information on these specific technologies in the corresponding chapters of this catalogue.
    [Show full text]
  • Rule Preamble and Definitions and Minimum Efficacy Standard For
    Vermont Appliance Efficiency and Water Conservation Standards Preamble The Vermont Appliance Efficiency and Water Conservations Stqndards are designed to ensure that the federal appliance and lighting fficiency standards in effect on January 19, 2017 will be in place in Vermont should the federal standards be repealed or voided. Implementation of these standards pursuant to Act 42 shall occur when any existingfederal standards included in this rule is withdrawn, repealed or otherwise voided, or where awaiver offederal preemption is issued pursuant to 42 U.S.C. S 6306(b). Wen a standard that is included in this rule becomes enforceoble, a person shall not sell or offer for sale in the State a new product subiect to the standard unless the fficiency or water conservation of the new product meets or exceeds the requirements set forth in the standard. The below listed definitions and minimum efficacy standard for General Service Lamps shall be in effect commencing on llll2020. General Service Lamp - Definitions A general service lamp is a lamp that has an ANSI base; is able to operate at a voltage of 12 volts or 24 volts , at or between 100 to 130 volts, at or between22} to 240 volts, or of 277 volts for integrated lamps (as defined in this section), or is able to operate at arry voltage for non- integrated lamps (as defined in this section); has an initial lumen output of greater than or equal to 310 lumens (or 232lumens for modified spectrum general service incandescent lamps) and less than or equal to 3,300 lumens; is not a light fixture; is not an LED downlight retrofit kit; and is used in general lighting applications.
    [Show full text]
  • Performance of Incandescent a Type and Decorative Lamps and LED
    Performance of Incandescent A-Type and Decorative Lamps and LED Replacements Prepared for the U.S. Department of Energy by Pacific Northwest National Laboratory PNNL-18023 Performance of Incandescent A-Type and Decorative Lamps and LED Replacements CALiPER Benchmark Report RD Lingard MA Myer ML Paget November 2008 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 Abstract The U.S. Department of Energy (DOE) Commercially Available LED Product Evaluation and Reporting (CALiPER) Program was established in 2006 to investigate the performance of luminaires and replacement lamps based on light-emitting diode (LEDs). To help users better compare LED products with conventional lighting technologies, CALiPER also has performed benchmark research and testing of traditional (i.e., non-LED) lamps and fixtures. This benchmark report addresses common omnidirectional incandescent lamps—A-type and small decorative, candelabra-type lamps—and their commercially available LED replacements. The construction and operation of incandescent lamps are discussed, as well as incandescent lamp performance, based on manufacturer data and CALiPER benchmark testing. In addition, the report describes LED replacements for incandescent A-lamps and small decorative lamps and compares their performance with incandescent benchmarks on a range of standard lighting measures, including power usage, light output and distribution, luminous efficacy, correlated color temperature, and the
    [Show full text]
  • Chapter 2 Incandescent Light Bulb
    Lamp Contents 1 Lamp (electrical component) 1 1.1 Types ................................................. 1 1.2 Uses other than illumination ...................................... 2 1.3 Lamp circuit symbols ......................................... 2 1.4 See also ................................................ 2 1.5 References ............................................... 2 2 Incandescent light bulb 3 2.1 History ................................................. 3 2.1.1 Early pre-commercial research ................................ 4 2.1.2 Commercialization ...................................... 5 2.2 Tungsten bulbs ............................................. 6 2.3 Efficacy, efficiency, and environmental impact ............................ 8 2.3.1 Cost of lighting ........................................ 9 2.3.2 Measures to ban use ...................................... 9 2.3.3 Efforts to improve efficiency ................................. 9 2.4 Construction .............................................. 10 2.4.1 Gas fill ............................................ 10 2.5 Manufacturing ............................................. 11 2.6 Filament ................................................ 12 2.6.1 Coiled coil filament ...................................... 12 2.6.2 Reducing filament evaporation ................................ 12 2.6.3 Bulb blackening ........................................ 13 2.6.4 Halogen lamps ........................................ 13 2.6.5 Incandescent arc lamps .................................... 14 2.7 Electrical
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 8,723,434 B2 Watson Et Al
    USOO8723434B2 (12) United States Patent (10) Patent No.: US 8,723,434 B2 Watson et al. (45) Date of Patent: May 13, 2014 (54) LED BULB FOR GENERAL AND LOW (56) References Cited INTENSITY LIGHT U.S. PATENT DOCUMENTS (75) Inventors: Calvin Hugh Watson, Austin, TX (US); 8,188,671 B2 * 5/2012 Canter et al. .................. 315,224 Cheryl Lynn Heinsohn, Austin, TX 2006/0238136 A1 * 10/2006 Johnson, III et al. ..... 315, 185 R. (US) 2011/O133649 A1* 6, 2011 Kreiner et al. .................. 315,86 2011/01934.82 A1* 8, 2011 Jones .............................. 315/87 (73) Assignee: Calvin Hugh Watson, Austin, TX (US) * cited by examiner (*) Notice: Subject to any disclaimer, the term of this Primary Examiner — Crystal L Hammond patent is extended or adjusted under 35 U.S.C. 154(b) by 102 days. (57) ABSTRACT Abimodal light emitting diode (LED) lightbulb, method, and (21) Appl. No.: 13/452,623 system having a form factor compatible with industry stan dard lightbulb sockets provides general lighting when power (22) Filed: Apr. 20, 2012 is received via one or more lightbulb electrical contacts, then as a different luminosity when power is removed from the contacts. A first subset of LEDs is powerable via the contacts (65) Prior Publication Data for general light, while a second subset of LEDs is powerable US 2013/0278162 A1 Oct. 24, 2013 via an energy storage device. Both Subsets of LEDs are pack aged in a replaceable light bulb. The energy storage device Int. C. may comprise a capacitor or battery which may be charged (51) when power is Supplied via the contacts.
    [Show full text]