DOCSLIB.ORG

BULLS Brose CI

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
BULLS Brose CI BULLS BROSE_Trekking_BBC_COVER Page 1 Wednesday, October 11, 2017 2:12 PM IMPORTANT READ CAREFULLY BEFORE USE KEEP SAFE FOR LATER REFERENCE E l e c t r i c b i c y c l e O P E R A T I NG EN I N S T R U C T I ON S Lacuba BULLS BROSE_Trekking_BBC_COVER Page 2 Wednesday, October 11, 2017 2:12 PM Copyright © BULLS Bikes USA Distribution or reproduction of these operating instructions and utilization or communication of their content is prohibited unless expressly approved. Any infringement will render the offender liable for compensation. All rights reserved in the event that a patent, utility model or industrial design is registered. BULLS BROSE_Trekking_BBC Page 1 Data sheet Name of the purchaser: Date of purchase: Model: Frame number: Type number: Unladen weight (lbs): Tire size: Recommended tire pressure (bar)*: front: rear: Wheel circumference (mm): Company stamp and signature: *After a tire change, refer to the tire markings for the permitted tire pressures and make sure that they are observed. The recommended tire pressure must not be exceeded. 1 BULLS BROSE_Trekking_BBC Page 2 Technical data 1 Technical data Bicycle Transportation temperature 41°F - 77°F Ideal transportation temperature 50°F - 59°F Storage temperature 41°F - 77°F Ideal storage temperature 50°F - 59°F Operation temperature 41°F - 95°F Working environment temperature 59°F - 77°F Charging temperature 50°F - 86°F Power output/system 250 W (0.25 W) Shut-off speed - Class 1 bicycle 20 mph Shut-off speed - Class 3 bicycle 28 mph Table 1: Bicycle technical data Battery Transportation temperature 41°F - 77°F Ideal transportation temperature 50°F - 59°F Storage temperature 41°F - 77°F Ideal storage temperature 50°F - 59°F Charging ambient temperature 50°F - 86°F Table 2: Battery technical data 2 BULLS BROSE_Trekking_BBC Page 3 Technical data Display Internal lithium ion battery 3.7 V, 240 mAh Storage temperature 14 °F to 140°F Charging ambient temperature 50°F - 86°F Table 3: Display technical data Emissions A-weighted emission sound pressure level <70dB(A) Total vibration level for the hands and arms <2.5m/s² Highest effective value of weighted <0.5m/s² acceleration for the entire body Table 4: Emissions from the bicycle* *The safety requirements as per Electromagnetic Compatibility Directive 2014/30/EU have been met. The bicycle and the charger can be used in residential areas without restriction. USB port Charge voltage 5V Charging current max. 500 mA Table 5: USB port technical data Tightening torque Axle nut tightening torque 35 Nm - 40 Nm Handlebars clamping screw maximum 5Nm - 7Nm tightening torque* 3 BULLS BROSE_Trekking_BBC Page 4 Table of contents 1 Technical data 2 2 About these instructions 8 2.1 Manufacturer 8 2.2 Laws, standards and directives 9 2.3 Other valid documents 9 2.4 Subject to change 9 2.5 Language 10 2.6 Identifying 11 2.6.1 Operating instructions 11 2.6.2 Bicycle 11 2.7 For your safety 13 2.7.1 Instruction, training and customer service 13 2.7.2 Basic safety notes 14 2.7.3 Warnings 14 2.7.4 Safety markings 15 2.8 For your information 15 2.8.1 Instructions for actions 15 2.8.2 Information on the type plate 15 2.8.3 Language conventions 18 2.9 Type plate 20 3 Safety 21 3.1 Requirements for the rider 21 3.2 Proper use 21 3.2.1 City and trekking bicycle 22 3.3 Improper use 22 3.4 Personal protective equipment 22 3.5 Hazards for vulnerable groups 22 3.6 Duty of care 23 3.6.1 Rider 23 3.6.2 User 23 4 Description 25 4.1 Overview 25 4.2 Handlebars 26 4.3 Wheel and fork 27 4.3.1 Valve 27 4.3.2 Suspension 28 4.4 Brake system 29 4.4.1 Rim brake 29 4.4.1.1 Locking lever 30 4 BULLS BROSE_Trekking_BBC Page 5 Table of contents 4.4.2 Disc brake 31 4.5 Electric drive system 32 4.6 Drive system 32 4.6.1 Battery 34 4.6.1.1 Operating and charge status indicator 36 4.6.2 Running light 36 4.6.3 Display 37 4.6.3.1 USB port 38 4.6.3.2 Displays 38 4.6.4 Command console 42 5 Transportation, storage and assembly 43 5.1 Transportation 43 5.2 Storing 45 5.2.1 Break in operation 45 5.2.1.1 Preparing a break in operation 46 5.2.1.2 Carrying out break in operation 46 5.3 Assembly 47 5.3.1 Unpacking 47 5.3.2 Scope of delivery 48 5.3.3 Commissioning 48 5.3.3.1 Checking the battery 50 5.4 Installing the wheels with quick release 51 6 Adjusting the bicycle to the rider 52 6.1 Adjusting the saddle 52 6.1.1 Determining the seat height 52 6.1.2 Clamp the seat post with the quick release 53 6.1.3 Adjusting the sitting position and saddle tilt 54 6.2 Setting the handlebars 54 6.3 Setting the stem with quick release 55 6.4 Checking the clamping force of the quick releases 56 6.5 Basic suspension setting 57 6.5.1 Adjusting the hardness of the spring elements 57 6.5.1.1 Adjusting the hardness of the steel suspension fork 57 6.5.1.2 Adjusting the hardness of the air suspension elements 58 6.5.1.3 Front wheel 58 6.6 Setting the grip distance of the brake lever 59 6.6.1 Hydraulically operated rim brake 59 6.6.2 Hydraulically operated disc brake 60 5 BULLS BROSE_Trekking_BBC Page 6 Table of contents 7 Operation 61 7.1 Before each ride 63 7.2 Using the kickstand 65 7.3 Using the pannier rack 66 7.4 Battery 68 7.4.1 Down tube battery 70 7.4.1.1 Removing the down tube battery 70 7.4.1.2 Inserting the down tube battery 70 7.4.2 Integrated battery 71 7.4.2.1 Removing the integrated battery 71 7.4.2.2 Inserting the integrated battery 71 7.4.3 Charging the battery 72 7.4.4 Waking the battery 74 7.5 Electric drive system 75 7.5.1 Switching on the drive system 75 7.5.2 Switching off the drive system 75 7.6 Command console with display 76 7.6.1 Using the USB port 76 7.6.2 Removing and attaching the display 76 7.6.3 Using the pushing aid 78 7.6.4 Using the running light 79 7.6.5 Selecting the level of assistance 79 7.6.6 Switching journey information 79 7.6.7 Changing the system information 79 7.7 Gear shift 80 7.8 Brakes 81 7.8.1 Using the brake 82 7.9 Locking the front wheel suspension 83 8 Maintenance 84 8.1 Cleaning and servicing 85 8.1.1 Battery 85 8.1.2 Display 85 8.1.3 Basic cleaning and preservation 86 8.1.4 Chain 86 8.2 Maintenance 87 8.2.1 Wheel 87 8.2.2 Brake system 88 8.2.3 Electrical cables and brake cables 88 8.2.4 Gear shift 88 8.2.5 USB port 88 8.2.6 Chain or belt tension 88 6 BULLS BROSE_Trekking_BBC Page 7 Table of contents 8.3 Service 90 8.4 Correcting and repairing 91 8.4.1 Using original parts only 91 8.4.2 Wheel quick release 92 8.4.2.1 Clamping the quick release Adjusting 93 8.4.3 The tire pressure 95 8.4.3.1 Dunlop valve 95 8.4.3.2 Presta valve 96 8.4.3.3 Schrader valve 97 8.4.4 Adjusting the gear shift 98 8.4.4.1 Cable-operated gear shift, single-cable 98 8.4.4.2 Cable-operated gear shift, dual-cable 99 8.4.4.3 Cable-operated twist grip, dual-cable 100 8.4.5 Replacing the lighting 101 8.4.6 Setting the lamp 101 8.4.7 Repair by the specialist dealer 101 8.4.8 First aid for system messages 102 8.4.8.1 First aid 102 8.4.8.2 Specific fault eradication 103 8.4.9 The electric drive system of drive system does not start up 104 8.5 Accessories 105 8.5.1 Child seat 106 8.5.2 Bicycle trailer 108 9 Recycling and disposal 109 10 EC declaration of conformity 111 11 Table of figures 112 13 List of tables 114 14 Subject index 115 7 BULLS BROSE_Trekking_BBC Page 8 About these instructions 2 About these instructions Read these operating instructions before commissioning the bicycle in order to use all the functions correctly and safely. They are not a substitute for personal training by the BULLS specialist dealer. The operating instructions are a component part of the bicycle. Therefore, if it is re- sold at a later time, they must be handed over to the subsequent owner. These operating instructions are mainly directed towards the rider and user of the bicycle. In general, they are technical laypersons. Text passages which are directed expressly at specialist staff (e.g. bicycle mechanics), are clearly marked with a blue tool symbol. Staff at all BULLS specialist dealers have specialist training and qualifications, and are therefore capable of identifying risks and preventing hazards which may arise during maintenance, servicing and repairs on the bicycle.
Load more

Recommended publications
  • Tightening Torques for Giant Bikes
    READY, SET, RIDE Congratulations on your new Giant bicycle! Whether it’s for competition, commuting, fitness or fun, every Giant bike is made to enhance your cycling life. We aim to be a trusted companion on every road, path and trail that unfolds before you. YOUR FRIEND IN CYCLING Giant was founded in 1972 with a mission: Create better bikes to improve the cycling experience. From the very start, innovation and manufacturing expertise set us apart. Over the last four decades, we have grown well beyond our manufacturing roots to become the world’s leading brand of quality bicycles and gear. With more than 12,000 retail partners worldwide, our goal today is to inspire adventure in all riders, from casual to competitive. GET TO KNOW YOUR NEW BIKE Before your first ride, please read through this manual. You’ll learn about the various parts, components and technologies—many of which may be new to you and are designed specifically for this particular bike. And whatever your level of experience, please pay attention to the safe riding instructions. Your best resource for service and technical advice is your local Giant retailer. To find one, or to learn more about Giant, go to giant-bicycles.com. Thank you for riding Giant. We’re proud to be part of your cycling life. RIDE LIFE. RIDE GIANT. Contents GENERAL WARNING p. 1 A special note to parents p. 2 1. First A. Bike fit p. 3 B. Safety first p. 3 C. Mechanical Safety Check p. 3 D. First ride p. 5 2.
    [Show full text]
  • Kettler Operation Instructions Bicycle 2020
    IMPORTANT READ CAREFULLY BEFORE USE KEEP SAFE TO CONSULT AT A LATER DATE Operating instructions Bicycle MY20P02-1 - 1_1.0_13.01.2020 Contents Contents 1 About these operating instructions 3 5 Assembly 20 1.1 Manufacturer 3 5.1 Required tools 20 1.2 Identifying the operating instructions 3 5.2 Unpacking 20 1.3 Laws, standards and directives 3 5.2.1 Scope of delivery 20 1.4 For your information 4 5.3 Commissioning 20 1.4.1 Warnings 4 5.3.1 Installing the wheel in the Suntour fork 21 1.4.2 Markups 4 5.3.1.1 Screw-on axle (15 mm) 21 2 Safety 5 5.3.1.2 Screw-on axle (20 mm) 22 2.1 General warnings 5 5.3.1.3 Quick release axle 22 2.1.1 Toxic substances 5 5.3.1.4 Quick release 26 2.1.1.1 Brake fluid 5 5.3.2 Installing the wheel in the FOX fork 27 2.2 Requirements for the rider 6 5.3.2.1 Quick release (15 mm) 27 2.3 Vulnerable groups 6 5.3.2.2 Kabolt axle 29 2.4 Personal protective equipment 6 5.3.3 Checking the stem and handlebars 29 2.5 Safety markings and safety instructions 6 5.3.3.1 Checking connections 29 2.6 Emergency 6 5.3.3.2 Firm hold 30 2.6.1 What to do in an emergency 6 5.3.3.3 Checking the headset backlash 30 2.6.2 Leaking fluids 6 5.4 Selling bicycles 30 2.6.2.1 Brake fluid 6 6 Operation 31 2.6.2.2 Oils and lubricants from the fork 6 6.1 Risks and hazards 31 2.6.2.3 Oils and lubricants from the rear frame 6.1.1 Personal protective equipment 31 damper 6 6.2 Instruction and customer service 32 3Overview 76.3 Adjusting the bicycle 32 3.1 Description 8 6.3.1 Adjusting the saddle 32 3.1.1 Wheel 8 6.3.1.1 Adjusting the saddle tilt 32
    [Show full text]
  • The New Zealand & Australian Experience with Central Tyre Inflation
    TheThe NewNew ZealandZealand && AustralianAustralian ExperienceExperience withwith CentralCentral TyreTyre InflationInflation Neil Wylie Innovative Transport Equipment Ltd Log Transport Safety Council Tyre Development • 1846 – Robert William Thomson invented and patented the pneumatic tire • 1888 – First commercial pneumatic bicycle tire produced by Dunlop • 1889 – John Boyd Dunlop patented the pneumatic tire in the UK • 1890 – Dunlop, and William Harvey Du Cros began production of pneumatic tires in Ireland • 1890 – Bartlett Clincher rim introduced • 1891 – Dunlop's patent invalidated in favor of Thomson’s patent • 1892 – Beaded edge tires introduced in the U.S. • 1894 – E.J. Pennington invents the first balloon tire • 1895 – Michelin introduced pneumatic automobile tires • 1898 – Schrader valve stem patented • 1900 – Cord Tires introduced by Palmer (England) and BFGoodrich (U.S.) • 1903 – Goodyear Tire Company patented the first tubeless tire, however it was not introduced until 1954 • 1904 – Goodyear and Firestone started producing cord reinforced tires • 1904 – Mountable rims were introduced that allowed drivers to fix their own flats • 1908 – Frank Seiberling invented grooved tires with improved road traction • 1910 – BFGoodrich Company invented longer life tires by adding carbon black to the rubber • 1919 – Goodyear and Dunlop announced pneumatic truck tires[2] • 1938 – Goodyear introduced the rayon cord tire • 1940 – BFGoodrich introduced the first commercial synthetic rubber tire • 1946 – Michelin introduced the radial tire •
    [Show full text]
  • The Tracker | January – March 2019 | Tirecraft.Com FALL 2021
    FALL 2021 THE PUBLICATION FOR TIRE PROFESSIONALS FROM WESTERN CANADA TIRE DEALERS DIALLING IN THE EV CHARGED WITH OPPORTUNITY PLUS • Covid Conundrum • EV Tire Evolution • How to Foil Phishing • Looking for Labour • OK Tire Awards • Valve Stems Get Respect Join one of Canada’s fastest growing retail tire brands. TIRECRAFT is a network of 250+ independantly owned and operated retail tire and automotive repair businesses across Canada. National Branding Preferred Programs Operational Support Digital/Traditional marketing and Access to exclusive tire and parts Training, coaching, performance groups a nationally recognized brand. programs at preferred pricing. based on proven proft-driving methods. Learn more about becoming a TIRECRAFT dealer today by contacting the representative closest to you. AB BC SK/MB Ray Lehman Clare Lowe Dan Johnson 780-733-2239 236-688-3668 587-337-6848 [email protected] [email protected] [email protected] 2 The Tracker | January – March 2019 | www.wctd.ca tirecraft.com FALL 2021 Published by Western Canada Tire Dealers Publication Mail Agreement No.40050841 65 Woodbine Road, Sherwood Park, AB T8A 4A7 • Phone 780-554-9259 Return undeliverable Canadian addresses to: Circulation Department 65 Woodbine Road, Sherwood Park, AB T8A 4A7 WCTD EXECUTIVE 2020-2021 Email: [email protected] www.wctd.ca PRESIDENT - NEAL SHYMKO PAST PRESIDENT - PAUL MCALDUFF VICE PRESIDENT - TIM HOLLETT EXECUTIVE DIRECTOR - RAY GELETA We hope you fnd this issue of The Tracker informative, educa- 65 Woodbine Road, Sherwood Park, AB T8A 4A7 tional and entertaining. We welcome your feedback and invite Phone 780-554-9259 Email: [email protected] you to submit any ideas you have for upcoming issues.
    [Show full text]
  • Scotland 03 / 2010 Neil Wylie Innovative Transport Equipment Ltd Tyre Development
    Timber Hauliers Conference Scotland 03 / 2010 Neil Wylie Innovative Transport Equipment Ltd Tyre Development • 1846 – Robert William Thomson invented and patented the pneumatic tire • 1888 – First commercial pneumatic bicycle tire produced by Dunlop • 1889 – John Boyd Dunlop patented the pneumatic tire in the UK • 1890 – Dunlop, and William Harvey Du Cros began production of pneumatic tires in Ireland • 1890 – Bartlett Clincher rim introduced • 1891 – Dunlop's patent invalidated in favor of Thomson’s patent • 1892 – Beaded edge tires introduced in the U.S. • 1894 – E.J. Pennington invents the first balloon tire • 1895 – Michelin introduced pneumatic automobile tires • 1898 – Schrader valve stem patented • 1900 – Cord Tires introduced by Palmer (England) and BFGoodrich (U.S.) • 1903 – Goodyear Tire Company patented the first tubeless tire, however it was not introduced until 1954 • 1904 – Goodyear and Firestone started producing cord reinforced tires • 1904 – Mountable rims were introduced that allowed drivers to fix their own flats • 1908 – Frank Seiberling invented grooved tires with improved road traction • 1910 – BFGoodrich Company invented longer life tires by adding carbon black to the rubber • 1919 – Goodyear and Dunlop announced pneumatic truck tires[2] • 1938 – Goodyear introduced the rayon cord tire • 1940 – BFGoodrich introduced the first commercial synthetic rubber tire • 1946 – Michelin introduced the radial tire • 1947 – Goodyear introduced first nylon tires • 1947 – BFGoodrich introduced the tubeless tire • 1963 – Use of
    [Show full text]
  • EN 877-00136 1.0 0.01 09.18 KETTLER Suntour MY19 COVER.Book Page 1 Thursday, September 13, 2018 12:56 PM
    EN_877-00136_1.0_0.01_09.18_KETTLER Suntour MY19_COVER.book Page 1 Thursday, September 13, 2018 12:56 PM IMPORTANT READ CAREFULLY BEFORE USE KEEP SAFE FOR LATER REFERENCE TRANSLATION OF THE ORIGINAL EN OPERATING INSTRUCTIONS ELECTRIC BICYCLES Comfort, Escaro Comp 8, Escaro Cross, EscaroPro, Quadriga Cityhopper, Quadriga CX, Quadriga Cross, Quadriga Plus, Quadriga KB065-VAKxxx, KB065-VBKxxx, KB065-VCKxxx, KB066-VAFxxx, KB066-VBFxxx, KB066-VCFxxx, KB068.VAFxxx, KB068-VARxxx, KB069-VAFxxx, KB070-VAKxxx, KB070-VBKxxx, KB076-VAFxxx, 877-00136 • 1.0 • 13 September 2018 EN_877-00136_1.0_0.01_09.18_KETTLER Suntour MY19_COVER.book Page 3 Thursday, September 13, 2018 12:56 PM Copyright © ZEG Zweirad-Einkaufs-Genossenschaft eG Distribution or reproduction of these operating instructions and utilisation or communication of their content is prohibited unless expressly approved. Any infringement will render the offender liable for compensation. All rights reserved in the event that a patent, utility model or industrial design is registered. Data sheet Surname, first name of the purchaser: Date of purchase: Model: Frame number: Type number: Unladen weight (kg): Tyre size: Recommended tyre pressure (bar)*: front: rear: Wheel circumference (mm): Company stamp and signature: *After a tyre change, refer to the tyre markings for the permitted tyre pressures and make sure that they are observed. The recommended tyre pressure must not be exceeded. 877-00136_1.0_17.09.2018 1 Table of contents Table of contents 1 About these instructions 7 1.1 Manufacturer 7
    [Show full text]
  • Rolling Resistance in Road Infrastructure Asset Management Systems
    2 MIRIAM _____________________________________________ Models for rolling resistance In Road Infrastructure Asset Management systems Rolling Resistance – Basic Information and State-of- the-Art on Measurement methods Editor: Ulf Sandberg, Swedish National Road and Transport Research Institute (VTI) List of contributors inside Deliverable # 1 in MIRIAM SP 1 Final version, updated 2011-06-01 Document type and No. Report MIRIAM_SP1_01 Sub-project SP 1 Measurement methods and source models Author(s) Editor: Ulf Sandberg (a). List of contributors inside Authors' affiliations (acronyms) (a) VTI Contact data for main author [email protected] Document status and date Version 110401, rev. 110412, rev. 110512, rev 110601 Dissemination level Public File Name MIRIAM_SP1_SoA_Report List of contributors: The order below is by alphabetical order of the authoring institutes (except in the case of the editor), and has nothing to do with the extent or importance of the contributions. Ulf Sandberg Swedish Road and Transport Research Institute (VTI), Linköping, Sweden Editor and main author Manfred Haider and Marco Conter Austrian Institute of Technology (AIT), Vienna, Austria Co-authors, contributors regarding definitions and models Luc Goubert and Anneleen Bergiers Belgian Road Research Centre (BRRC), Brussels, Belgium Co-authors, contributors regarding the trailer method Klaus-Peter Glaeser, Gernot Schwalbe and Marek Zöller Federal Highway Research Institute (BASt), Bergisch-Gladbach, Germany Co-authors, major contributors regarding laboratory drum
    [Show full text]
  • Dunlop Application Guide
    DUNLOP APPLICATION GUIDE RECOMMENDED TIRE INFORMATION ORIGINAL EQUIPMENT TIRE INFORMATION OPTIONAL TIRE INFORMATION Model Number Model Name Rim SizeRim Size Front Front Front Rear Rear Rear Front Front Front Rear Rear Rear Front Front Front Rear Rear Rear Front Rear Model Size PSI Model Size PSI Model Size PSI Model Size PSI Model Size PSI Model Size PSI APRILIA SXV 450 (07-10) 3.50x17 5.50x17 Sportmax Q3+ 120/70ZR17 28 Sportmax Q3+ 180/55ZR17 32 GPR-300 120/70ZR17 28 GPR-300 180/55ZR17 32 SXV 550 (07-11) 3.50x17 5.50x17 Sportmax Q3+ 120/70ZR17 28 Sportmax Q3+ 180/55ZR17 32 GPR-300 120/70ZR17 28 GPR-300 180/55ZR17 32 Pegaso 650 (99-01) 2.15x19 3.00x17 Trailsmart 100/90-19 30 Trailsmart 130/80R17 33 Dorsoduro 750 / ABS (09-11, 13-16) 3.50x17 6.00x17 Sportmax Q3+ 120/70ZR17 36 Sportmax Q3+ 180/55ZR17 40 Qualifier ** 120/70ZR17 36 Qualifier ** 180/55ZR17 41 GPR-300 120/70ZR17 36 GPR-300 180/55ZR17 40 Shiver 750 (08-16) 3.50x17 6.00x17 Sportmax Q3+ 120/70ZR17 36 Sportmax Q3+ 180/55ZR17 41 Qualifier ** 120/70ZR17 36 Qualifier ** 180/55ZR17 41 GPR-300 120/70ZR17 36 GPR-300 180/55ZR17 41 Mana 850 (09-10) 3.50x17 6.00x17 Sportmax Q3+ 120/70ZR17 36 Sportmax Q3+ 180/55ZR17 41 GPR-300 120/70ZR17 36 GPR-300 180/55ZR17 41 Mana 850 GT ABS (10-15) 3.50x17 6.00x17 Roadsmart III 120/70ZR17 36 Roadsmart III 180/55ZR17 41 Sportmax Q3+ 120/70ZR17 36 Sportmax Q3+ 180/55ZR17 41 ETV 1000 (02-07) Caponord 2.50x19 4.00x17 Trailsmart 110/80R19 36 Trailsmart 150/70R17 40 RST Futura (01-03) 3.50x17 6.00x17 Roadsmart III 120/70ZR17 36 Roadsmart III 180/55ZR17 41
    [Show full text]
  • Instructions
    PAGE 1 installation instructions THIS PRODUCT IS FOR OFFROAD USE ONLY WATCH THE INSTALLATION VIDEO AT TUBLISS.COM QUICK TIPS BEFORE YOU BEGIN It’s worth noting that TUbliss installation is rather simple, but because it is completely different than what you’re used to, we STRONGLY urge you to take 10 minutes, watch the online video, and read these instructions completely so you understand the WHAT’S INCLUDED concepts and procedure of proper installation. The • RED Inner-Liner with Rim Lock 10 minutes you invest now will spare you hours of frustration • Black Inner-Bladder (packaged inside later. Do not take any ‘shortcuts’ during installation. THERE IS A REASON the RED Inner-Liner) FOR EVERY STEP! LET US GUIDE YOU THROUGH! The video can be seen • Installation Guide Plate at: www.Tubliss.com • Rim Tape • We recommend installing TUbliss with new tires that have not been mounted for • Rim Stickers the reason that STOCK rim locks leave impressions at the inside bead area of a tire where the TUbliss must seal against and these impressions can cause leaks. TOOLS NEEDED HOWEVER on this same note, if a tire has initially been mounted with a TUbliss it • Drill and 11mm or 7/16” bit (a CAN be remounted or turned around without any issues as the rim lock is above the smaller 6mm or 1/4” bit may be sealing surface inside of the tire. needed for a pilot hole) • First time installation will require either drilling a new hole in your rim or enlarging an • Small tip knife (Xacto or pocket knife) existing one to 11mm or 7/16” for the new rim-lock / tire infl ation valve.
    [Show full text]
  • Design of a Portable Tire Test Rig and Vehicle Roll- Over Stability Control
    Design of a Portable Tire Test Rig and Vehicle Roll- Over Stability Control Derek Martin Fox Thesis submitted to the faculty of the Virginia Polytechnic Institute and State University in partial fulfillment of the requirements for the degree of Master of Science In Mechanical Engineering Approved Saied Taheri, Chair John B. Ferris Disapproved Mehdi Ahmadian Presented on December 9, 2009 Danville, VA Keywords: Portable Tire Test Rig, Vehicle Rollover Mitigation Techniques © 2009 Design of a Portable Tire Test Rig and Vehicle Roll-Over Stability Control Derek Martin Fox Abstract Vehicle modeling and simulation have fast become the easiest and cheapest method for vehicle testing. No longer do multiple, intensive, physical tests need be performed to analyze the performance parameters that one wishes to validate. One component of the vehicle simulation that is crucial to the correctness of the result is the tire. Simulations that are run by a computer can be run many times faster than a real test could be performed, so the cost and complexity of the testing is reduced. A computer simulation is also less likely to have human errors introduced with the caveat that the data input into the model and simulation is accurate, or as accurate as one would like their results to be. Simulation can lead to real tests, or back up tests already performed. The repeatability of testing is a non-issue as well. Tire models are the groundwork for vehicle simulations and accurate results cannot be conceived without an accurate model. The reason is that all of the forces transmitted to and from the vehicle to the ground must occur at the tire contact patches.
    [Show full text]
  • Bicycle Tires and Tubes Season 2020
    Bicycle tires and tubes Season 2020 www.mitas-cycling.com Mitas, part of Trelleborg Group Contents Mitas, part of Trelleborg Group, is one of Europe‘s leading producers of tires for agricultural machines, construction TECHNICAL DATA vehicles, motorcycles, bicycles and other specialty segments. The company tradition in the rubber industry dates back to 1908. Mitas offers an extensive range of bicycle tires and tubes spanning from MTB, All Mountain Tread patterns . 4 – 8 and Cross/Gravel to BMX, City, Trek, e-Bike, Road or Prams & Strollers. The range of Mitas motorcycle tires includes Packaging of folding Tires and Tubes . 9 Levels of Tires, Recommended usage . 10 on-road, trail, off-road, scooter and moped tires. Mitas has manufacturing facilities in the Czech Republic, Serbia, Tubeless Supra . 11 Slovenia and U.S. as well as a global sales and distribution network. www.mitas-tires.com MTB 12 – 19 ALL MOUNTAIN 20 – 21 BMX 22 – 23 CROSS & GRAVEL 24 – 27 CITY / TREK 28 – 32 E-BIKE 33 – 35 ROAD 36 – 37 WINTER 38 PRAMS & STROLLERS 39 REHA 40 TIRES Compounds . 41 Construction . 42 – 43 Technology . 44 – 45 TUBES 46 – 48 GAADI TUBES 49 SUMMARY Bicycle Tires by Tread Pattern . 50 Bicycle Tires by Size . 51 Sergio Mantecón Gutiérrez – UCI World Cup XCO – Vallnord, Andorra 2 www.mitas-cycling.com 3 Tread Patterns MTB ALL MOUNTAIN ETRTO Alternative size ETRTO Alternative size 66 - 622 29 x 2,60 62 - 622 29 x 2,45 62 - 622 29 x 2,45 57 - 622 29 x 2,25 ETRTO Alternative size ETRTO Alternative size ETRTO Alternative size 66 - 584 27,5 x 2,60 57 - 584
    [Show full text]
  • Bicycle Owner's Manual
    1 First 6 2 Saftey 14 3 Fit 24 4 Tech 34 5 Service 56 6 Appendix A 62 7 Appendix B 70 8 Appendix C 80 9 Appendix D 84 10 Appendix E 90 GENERAL WARNING: IMPORTANT: Like any outdoor activity, bicycling involves risk of injury and damage. By choosing to ride a This manual contains important safety, performance and service information. Read it before bicycle, you assume the responsibility for that risk, so you need to know — and to practice you take the first ride on your new bicycle, and keep it for reference. — the rules of safe and responsible riding and of proper use and maintenance. Proper use and maintenance of your bicycle reduces risk of injury. Additional safety, performance and service information for specific components such as suspension or pedals on your bicycle, or for accessories such as helmets or lights that This Manual contains many “Warnings” and “Cautions” concerning the consequences of you purchase, may also be available. Make sure that your dealer has given you all the failure to maintain or inspect your bicycle and of failure to follow safe cycling practices. manufacturers’ literature that was included with your bicycle or accessories. In case of a conflict between the instructions in this manual and information provided by a component • The combination of the safety alert symbol and the word WARNING indicates a manufacturer, always follow the component manufacturer’s instructions. potentially hazardous situation which, if not avoided, could result in serious injury or death. If you have any questions or do not understand something, take responsibility for your • The combination of the safety alert symbol and the word CAUTION indicates a safety and consult with your dealer or the bicycle’s manufacturer.
    [Show full text]